UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/gpu/drm/panel/Kconfig

457 lines
14 KiB
Plaintext
Raw Normal View History

treewide: Add SPDX license identifier - Makefile/Kconfig Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-19 20:07:45 +08:00
# SPDX-License-Identifier: GPL-2.0-only
drm: Add panel support Add a very simple framework to register and lookup panels. Panel drivers can initialize a DRM panel and register it with the framework, allowing them to be retrieved and used by display drivers. Currently only support for DPMS and obtaining panel modes is provided. However it should be sufficient to enable a large number of panels. The framework should also be easily extensible to support more sophisticated kinds of panels such as DSI. The framework hasn't been tied into the DRM core, even though it should be easily possible to do so if that's what we want. In the current implementation, display drivers can simple make use of it to retrieve a panel, obtain its modes and control its DPMS mode. Note that this is currently only tested on systems that boot from a device tree. No glue code has been written yet for systems that use platform data, but it should be easy to add. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 19:36:43 +08:00
config DRM_PANEL
bool
depends on DRM
help
Panel registration and lookup framework.
drm/panel: Add simple panel support Add a driver for simple panels. Such panels can have a regulator that provides the supply voltage and a separate GPIO to enable the panel. Optionally the panels can have a backlight associated with them so it can be enabled or disabled according to the panel's power management mode. Support is added for two panels: An AU Optronics 10.1" WSVGA and a Chunghwa Picture Tubes 10.1" WXGA panel. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 21:10:14 +08:00
menu "Display Panels"
drm/panel: consolidate unnecessary explicit dependencies DRM_PANEL_LD9040 and DRM_PANEL_S6E8AA0 both explicitly depended on DRM_PANEL && DRM, whereas DRM_PANEL_SIMPLE relies upon the dependency on the menu. We do not need to use explicit dependencies if we make the menu depend on DRM_PANEL && DRM - this will implicitly make each entry in the menu depend on DRM_PANEL && DRM without this needing to be explicitly stated against every entry. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-13 21:06:11 +08:00
depends on DRM && DRM_PANEL
drm/panel: Add simple panel support Add a driver for simple panels. Such panels can have a regulator that provides the supply voltage and a separate GPIO to enable the panel. Optionally the panels can have a backlight associated with them so it can be enabled or disabled according to the panel's power management mode. Support is added for two panels: An AU Optronics 10.1" WSVGA and a Chunghwa Picture Tubes 10.1" WXGA panel. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 21:10:14 +08:00
drm/panel: Add support for ARM Versatile panels The ARM reference designs "Versatile AB" and "Versatile PB" contain panel connectors with autodetection of the connected panel type. This adds a small driver utilizing the MFD syscon look-up to read the autodetection register and set up the corresponding panel appropriately. In the source file there is a bit of elaboration of the panel types and interfaces on these boards. This was tested with the PL111 DRM driver on the ARM Versatile AB with the IB2 daughterboard. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180205192013.5349-2-linus.walleij@linaro.org
2018-02-06 03:20:13 +08:00
config DRM_PANEL_ARM_VERSATILE
tristate "ARM Versatile panel driver"
depends on OF
depends on MFD_SYSCON
select VIDEOMODE_HELPERS
help
This driver supports the ARM Versatile panels connected to ARM
reference designs. The panel is detected using special registers
in the Versatile family syscon registers.
drm/panel: Add Boe Himax8279d MIPI-DSI LCD panel Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI panel. V11: - Use the backlight support in drm_panel to simplify the driver (Sam) V10: - Adjust init code, make the format more concise (Emil) V9: - kill off default_off_cmds (Emil) - use mipi_dsi_dcs_set_display_{on,off} in their enable/disable callbacks. (Emil) - Adjusting the delay function (Emil) V8: - modify PARENTHESIS_ALIGNMENT format (Sam) - use gpios are required API replace optional gpio API (Emil) V7: - Modify communication address V6: - Add the information of the reviewer - Remove unnecessary delays, The udelay_range code gracefully returns without hitting the scheduler on a delay of 0. (Derek) - Merge the same data structures, like display_mode and off_cmds (Derek) - Optimize the processing of results returned by devm_gpiod_get_optional (Derek) V5: - Add the information of the reviewer (Sam) - Delete unnecessary header files #include <linux/fb.h> (Sam) - The config DRM_PANEL_BOE_HIMAX8279D appears twice. Drop one of them (Sam) - ADD static, set_gpios function is not used outside this module (Sam) V4: - Frefix all function maes with boe_ (Sam) - Fsed "enable_gpio" replace "reset_gpio", Make it look clearer (Sam) - Sort include lines alphabetically (Sam) - Fixed entries in the makefile must be sorted alphabetically (Sam) - Add send_mipi_cmds function to avoid duplicating the code (Sam) - Add the necessary delay(reset_delay_t5) between reset and sending the initialization command (Rock wang) V3: - Remove unnecessary delays in sending initialization commands (Jitao Shi) V2: - Use SPDX identifier (Sam) - Use necessary header files replace drmP.h (Sam) - Delete unnecessary header files #include <linux/err.h> (Sam) - Specifies a GPIOs array to control the reset timing, instead of reading "dsi-reset-sequence" data from DTS (Sam) - Delete backlight_disable() function when already disabled (Sam) - Use devm_of_find_backlight() replace of_find_backlight_by_node() (Sam) - Move the necessary data in the DTS to the current file, like porch, display_mode and Init code etc. (Sam) - Add compatible device "boe,himax8279d10p" (Sam) V1: - Support Boe Himax8279d 8.0" 1200x1920 TFT LCD panel, it is a MIPI DSI panel. Signed-off-by: Jerry Han <jerry.han.hq@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Derek Basehore <dbasehore@chromium.org> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Reported-by: kbuild test robot <lkp@intel.com> Cc: Jitao Shi <jitao.shi@mediatek.com> Cc: Rock wang <rock_wang@himax.com.cn> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed boe_panel_get_modes + backlight] Link: https://patchwork.freedesktop.org/patch/msgid/20191212115208.3878-1-jerry.han.hq@gmail.com
2019-12-12 19:52:08 +08:00
config DRM_PANEL_BOE_HIMAX8279D
tristate "Boe Himax8279d panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Boe Himax8279d
TFT-LCD modules. The panel has a 1200x1920 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
config DRM_PANEL_BOE_TV101WUM_NL6
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
drm/panel: support for auo, kd101n80-45na wuxga dsi video mode panel Auo,kd101n80-45na's connector is same as boe,tv101wum-nl6. The most codes can be reuse. So auo,kd101n80-45na and boe,tv101wum-nl6 use one driver file. Add the different parts in driver data. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-4-jitao.shi@mediatek.com
2020-01-16 10:15:09 +08:00
Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
45NA WUXGA PANEL DSI Video Mode panel
drm/panel: support for boe tv101wum-nl6 wuxga dsi video mode panel Add driver for BOE tv101wum-nl6 panel is a 10.1" 1200x1920 panel. Signed-off-by: Jitao Shi <jitao.shi@mediatek.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116021511.22675-3-jitao.shi@mediatek.com
2020-01-16 10:15:08 +08:00
drm: panels: Add LVDS panel driver This driver supports LVDS panels that don't require device-specific handling of power supplies or control signals. It implements automatic backlight handling if the panel is attached to a backlight controller. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
2016-11-18 08:58:18 +08:00
config DRM_PANEL_LVDS
tristate "Generic LVDS panel driver"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
This driver supports LVDS panels that don't require device-specific
handling of power supplies or control signals. It implements automatic
backlight handling if the panel is attached to a backlight controller.
drm/panel: Add simple panel support Add a driver for simple panels. Such panels can have a regulator that provides the supply voltage and a separate GPIO to enable the panel. Optionally the panels can have a backlight associated with them so it can be enabled or disabled according to the panel's power management mode. Support is added for two panels: An AU Optronics 10.1" WSVGA and a Chunghwa Picture Tubes 10.1" WXGA panel. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 21:10:14 +08:00
config DRM_PANEL_SIMPLE
tristate "support for simple panels"
depends on OF
drm: panel/simple: add backlight dependency The simple panel code uses the backlight interface to find a device, which fails when backlight is disabled: drivers/built-in.o: In function `panel_simple_platform_probe': :(.text+0xd3c48): undefined reference to `of_find_backlight_by_node' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
2015-01-28 21:48:06 +08:00
depends on BACKLIGHT_CLASS_DEVICE
drm/panel: simple: Add display timing support The simple panel driver's ->get_modes() implementation calculates the display mode list from the typical timings and the ->get_timings() implementation returns the timings to the connected encoder for mode validation and fixup. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> [treding@nvidia.com: select VIDEOMODE_HELPERS] Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-12-12 01:32:45 +08:00
select VIDEOMODE_HELPERS
drm/panel: Add simple panel support Add a driver for simple panels. Such panels can have a regulator that provides the supply voltage and a separate GPIO to enable the panel. Optionally the panels can have a backlight associated with them so it can be enabled or disabled according to the panel's power management mode. Support is added for two panels: An AU Optronics 10.1" WSVGA and a Chunghwa Picture Tubes 10.1" WXGA panel. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 21:10:14 +08:00
help
DRM panel driver for dumb panels that need at most a regulator and
a GPIO to be powered up. Optionally a backlight can be attached so
that it can be automatically turned off when the panel goes into a
low power state.
drm/panel: add panel driver for Elida KD35T133 panels Panel driver for the KD35T133 display from Elida, used for example in the rk3326-based Odroid Go Advance handheld. changes in v3: - add missing return value assignment (Francesco) - re-sort header includes (Sam) changes in v2: - rename dsi_generic_write_seq macro to dsi_dcs_write_seq to honor the underlying mipi_dsi_dcs_write (Robin) Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200229151506.750242-3-heiko@sntech.de
2020-02-29 23:15:06 +08:00
config DRM_PANEL_ELIDA_KD35T133
tristate "Elida KD35T133 panel driver"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Elida
KD35T133 controller for 320x480 LCD panels with MIPI-DSI
system interfaces.
drm/panel: Add Feixin K101 IM2BA02 panel Feixin K101 IM2BA02 is a 800x1280 4-lane MIPI-DSI LCD panel. Add a panel driver for it. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200116033636.512461-4-icenowy@aosc.io
2020-01-16 11:36:34 +08:00
config DRM_PANEL_FEIXIN_K101_IM2BA02
tristate "Feixin K101 IM2BA02 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Feixin K101 IM2BA02
4-lane 800x1280 MIPI DSI panel.
drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI LCD panel Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel. Add panel driver for it. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Tested-by: Bhushan Shah <bshah@kde.org> Tested-by: Merlijn Wajer <merlijn@wizzup.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190212204109.3528-2-jagan@amarulasolutions.com
2019-02-13 04:41:09 +08:00
config DRM_PANEL_FEIYANG_FY07024DI26A30D
tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y if you want to enable support for panels based on the
Feiyang FY07024DI26A30-D MIPI-DSI interface.
drm/panel: Add Ilitek ILI9322 driver This adds support for the Ilitek ILI9322 QVGA (320x240) TFT panel driver. This panel driver supports serial or parallel RGB or YUV input and also ITU-T BT.656 input streams. The controller is combined with a physical panel and configured through the device tree. Cc: David Lechner <david@lechnology.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20171221234411.12156-1-linus.walleij@linaro.org
2017-12-22 07:44:11 +08:00
config DRM_PANEL_ILITEK_IL9322
tristate "Ilitek ILI9322 320x240 QVGA panels"
depends on OF && SPI
select REGMAP
help
Say Y here if you want to enable support for Ilitek IL9322
QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
drm/panel: Add Ilitek ILI9881c panel driver The LHR050H41 panel is the panel shipped with the BananaPi M2-Magic, and is based on the Ilitek ILI9881c Controller. Add a driver for it, modelled after the other Ilitek controller drivers. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/acb5453112ab7c7b801cf4f1669e351b391e77e8.1527587352.git-series.maxime.ripard@bootlin.com
2018-05-29 17:49:15 +08:00
config DRM_PANEL_ILITEK_ILI9881C
tristate "Ilitek ILI9881C-based panels"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y if you want to enable support for panels based on the
Ilitek ILI9881c controller.
drm/panel: add Innolux P079ZCA panel driver Support Innolux P079ZCA 7.85" 768x1024 TFT LCD panel, it is a MIPI DSI panel. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Tested-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/1490316692-20506-2-git-send-email-zyw@rock-chips.com
2017-03-24 08:51:32 +08:00
config DRM_PANEL_INNOLUX_P079ZCA
tristate "Innolux P079ZCA panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Innolux P079ZCA
TFT-LCD modules. The panel has a 1024x768 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
drm/panel: Add JDI LT070ME05000 WUXGA DSI Panel Add support for the JDI LT070ME05000 WUXGA DSI panel used in Nexus 7 2013 devices. Programming sequence for the panel is was originally found in the android-msm-flo-3.4-lollipop-release branch from: https://android.googlesource.com/kernel/msm.git And video mode setting is from dsi-panel-jdi-dualmipi1-video.dtsi file in: git://codeaurora.org/kernel/msm-3.10.git LNX.LA.3.6_rb1.27 Cc: Archit Taneja <archit.taneja@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Emil Velikov <emil.l.velikov@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@linux.ie> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> Tested-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2016-08-26 10:37:07 +08:00
config DRM_PANEL_JDI_LT070ME05000
tristate "JDI LT070ME05000 WUXGA DSI panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for JDI DSI video mode
panel as found in Google Nexus 7 (2013) devices.
The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
24 bit per pixel.
drm/panel: Add Kingdisplay KD097D04 panel driver Support Kingdisplay KD097D04 9.7" 1536x2048 TFT LCD panel, it is a MIPI dual-DSI panel. v4-resend: - Thierry noted missing dt-bindings for v4 but forgot that he already had applied them one kernel release back in https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ebc950fdff6d5f9250cd5a5a348af97f7d8508df v4: - address Philipp's comments - real range for usleep_range and - poweroff ordering in kingdisplay_panel_prepare - return value beautification in panel_probe - update author naming for full name v3: - address Thierry's comments - error handling for init dsi writes in init - unconditionally remove the panel - don't use drm_panel_detach - a bit of variable signednes wiggling - I did talk to ChromeOS people and the delays really should be as short as possible, so dropped the 100ms from the delay comments v2: - update timing + cmds from chromeos kernel - new backlight API including switch to devm_of_find_backlight - fix most of Sean Paul's comments enable/prepare tracking seems something all panels do - document origins of the init sequence - lanes per dsi interface to 4 (two interfaces). Matches how tegra and pending rockchip dual-dsi handle (dual-)dsi lanes - spdx header instead of license boilerplate Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Sean Paul <sean@poorly.run> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181030091528.28211-1-heiko@sntech.de
2018-10-30 17:15:28 +08:00
config DRM_PANEL_KINGDISPLAY_KD097D04
tristate "Kingdisplay kd097d04 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Kingdisplay kd097d04
TFT-LCD modules. The panel has a 1536x2048 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
drm/panel: add panel driver for Leadtek LTK050H3146W The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants with essentially the same name, LTK050H3146W and LTK050H3146W-A2. They differ in their init sequence and mode details. changes in v2: - add display variants changes in v3: - fixed indentation and artifacts found by Sam Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200408085317.2624599-2-heiko@sntech.de
2020-04-08 16:53:17 +08:00
config DRM_PANEL_LEADTEK_LTK050H3146W
tristate "Leadtek LTK050H3146W panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Leadtek LTK050H3146W
TFT-LCD modules. The panel has a 720x1280 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
drm/panel: add panel driver for Leadtek LTK500HD1829 The LTK500HD1829 is 5.5" DSI display. v5: - Fix some trivial checkpatch warnings while applying (sam) changes in v4: - drop error message if backlight not found, no other panel does that and if needed it should live in drm_panel_of_backlight changes in v3: - drop one more overlooked panel->drm access Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191224112641.30647-3-heiko@sntech.de
2019-12-24 19:26:41 +08:00
config DRM_PANEL_LEADTEK_LTK500HD1829
tristate "Leadtek LTK500HD1829 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Kingdisplay kd097d04
TFT-LCD modules. The panel has a 1536x2048 resolution and uses
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
drm/panel: Add Samsung prefix to panel drivers The likelihood of getting a large number of panel drivers from different vendors is quite high. Add a prefix to the two existing Samsung panel drivers to set a guideline for future patch submissions. Using vendor prefixes consistently should allow a cleaner organization of the tree. Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-14 20:57:14 +08:00
config DRM_PANEL_SAMSUNG_LD9040
tristate "Samsung LD9040 RGB/SPI panel"
drm/panel: make DRM_PANEL_LD9040 depend on SPI Rather than DRM_PANEL_LD9040 selecting SPI, which then results in an increase in the probability of Kconf reporting circular dependencies (we're one "select" away from that right now), make this depend on SPI instead. This is akin to having some driver select DRM. Having some drivers depend on a subsystem, and other drivers select a subsystem is a recipe for circular dependencies, and there's really no need for it. The potential circular dependency (which can be caused today by the addition of selecting DRM_PANEL from DRM_IMX_LDB) is: symbol DMADEVICES is selected by SAMSUNG_DMADEV symbol SAMSUNG_DMADEV is selected by S3C64XX_PL080 symbol S3C64XX_PL080 is selected by SPI_S3C64XX symbol SPI_S3C64XX depends on SPI symbol SPI is selected by DRM_PANEL_LD9040 symbol DRM_PANEL_LD9040 depends on DRM_PANEL symbol DRM_PANEL is selected by DRM_IMX_LDB symbol DRM_IMX_LDB depends on MFD_SYSCON symbol MFD_SYSCON is selected by POWER_RESET_KEYSTONE symbol POWER_RESET_KEYSTONE depends on POWER_SUPPLY symbol POWER_SUPPLY is selected by HID_SONY symbol HID_SONY depends on NEW_LEDS symbol NEW_LEDS is selected by BACKLIGHT_ADP8860 symbol BACKLIGHT_ADP8860 depends on BACKLIGHT_CLASS_DEVICE symbol BACKLIGHT_CLASS_DEVICE is selected by FB_MX3 symbol FB_MX3 depends on MX3_IPU symbol MX3_IPU depends on DMADEVICES Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-06-13 21:06:16 +08:00
depends on OF && SPI
drm/panel: add ld9040 driver The patch adds LD9040 parallel RGB panel driver with SPI control interface. The driver uses drm_panel framework. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-03-26 16:17:18 +08:00
select VIDEOMODE_HELPERS
drm/panel: Add driver for the LG Philips LB035Q02 panel This panel is used on the Gumstix Overo Palo35. The code is based on the omapdrm-specific panel-lgphilips-lb035q02 driver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-5-laurent.pinchart@ideasonboard.com
2019-08-14 04:10:56 +08:00
config DRM_PANEL_LG_LB035Q02
tristate "LG LB035Q024573 RGB panel"
depends on GPIOLIB && OF && SPI
help
Say Y here if you want to enable support for the LB035Q02 RGB panel
(found on the Gumstix Overo Palo35 board). To compile this driver as
a module, choose M here.
drm/panel: Add support for LG LG4573 480x800 4.3" panel The LG4573 is used on the LG LCD LB043WV2-SD01, an industrial 4.3" TFT panel with SPI control interface. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-06-09 13:51:22 +08:00
config DRM_PANEL_LG_LG4573
tristate "LG4573 RGB/SPI panel"
depends on OF && SPI
select VIDEOMODE_HELPERS
help
Say Y here if you want to enable support for LG4573 RGB panel.
To compile this driver as a module, choose M here.
drm/panel: Add driver for the NEC NL8048HL11 panel This panel is used on the Zoom2/3/3630 SDP boards. The code is based on the omapdrm-specific panel-nec-nl8048hl11 driver v2: - fix checkpatch warning (lcd == NULL) => (!lcd) (sam) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-6-laurent.pinchart@ideasonboard.com
2019-08-14 04:10:57 +08:00
config DRM_PANEL_NEC_NL8048HL11
tristate "NEC NL8048HL11 RGB panel"
depends on GPIOLIB && OF && SPI
help
Say Y here if you want to enable support for the NEC NL8048HL11 RGB
panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
as a module, choose M here.
drm/panel: Add driver for Novatek NT35510-based panels This adds a driver for panels based on the Novatek NT35510 display driver IC, such as the Hydis HVA40WV1 panel found in the Samsung GT-S7710. The NT35510 can be used with both internal and external backlight (such as GPIO backlight) so we support both: if no external backlight is found, we register a subdriver for the internal backlight. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200223121841.26836-3-linus.walleij@linaro.org
2020-02-23 20:18:41 +08:00
config DRM_PANEL_NOVATEK_NT35510
tristate "Novatek NT35510 RGB panel driver"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the panels built
around the Novatek NT35510 display controller, such as some
Hydis panels.
drm/panel: Add Novatek NT39016 panel support Add support for display panels built around the Novatek NT39016 display controller, as found on e.g. the King Display KD035G6-54NT 24-bit 320x240 3.5" LCD panel which equips the GCW Zero open-source handheld gaming console. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Maarten ter Huurne <maarten@treewalker.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190603152555.23527-2-paul@crapouillou.net
2019-06-03 23:25:55 +08:00
config DRM_PANEL_NOVATEK_NT39016
tristate "Novatek NT39016 RGB/SPI panel"
depends on OF && SPI
depends on BACKLIGHT_CLASS_DEVICE
select REGMAP_SPI
help
Say Y here if you want to enable support for the panels built
around the Novatek NT39016 display controller.
drm/panel: Add support for Olimex LCD-OLinuXino panel This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The panel is used with different LCDs (currently from 480x272 to 1280x800). A small EEPROM chip is used for identification, which holds some factory data and timing requirements. Signed-off-by: Stefan Mavrodiev <stefan@olimex.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1531383729-13932-1-git-send-email-stefan@olimex.com
2018-07-12 16:21:53 +08:00
config DRM_PANEL_OLIMEX_LCD_OLINUXINO
tristate "Olimex LCD-OLinuXino panel"
depends on OF
depends on I2C
depends on BACKLIGHT_CLASS_DEVICE
help
The panel is used with different sizes LCDs, from 480x272 to
1280x800, and 24 bit per pixel.
Say Y here if you want to enable support for Olimex Ltd.
LCD-OLinuXino panel.
drm/panel: Add support for OTM8009A panel driver This patch adds Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel driver (MIPI-DSI video mode). The panel backlight is managed through the DSI link. This panel driver is used in several STM32 boards. Signed-off-by: Philippe CORNU <philippe.cornu@st.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500297593-30633-4-git-send-email-philippe.cornu@st.com
2017-07-17 21:19:53 +08:00
config DRM_PANEL_ORISETECH_OTM8009A
tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Orise Technology
otm8009a 480x800 dsi 2dl panel.
drm/panel: Add OSD101T2587-53TS driver The panel is similar to OSD101T2045-53TS (which is handled by panel-simple) with one big difference: osd101t2587-53ts needs MIPI_DSI_TURN_ON_PERIPHERAL message to be sent from the host to be operational and thus can not be handled by panel-simple. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190226075523.28997-5-peter.ujfalusi@ti.com
2019-02-26 15:55:23 +08:00
config DRM_PANEL_OSD_OSD101T2587_53TS
tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for One Stop Displays
OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
drm/panel: Add Panasonic VVX10F034N00 MIPI DSI panel This adds support for the Panasonic panel found in some Xperia Z2 tablets. Signed-off-by: Werner Johansson <werner.johansson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-10-31 08:38:28 +08:00
config DRM_PANEL_PANASONIC_VVX10F034N00
tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Panasonic VVX10F034N00
WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
Xperia Z2 tablets
drm/panel: Add support for the Raspberry Pi 7" Touchscreen. This driver communicates with the Atmel microcontroller for sequencing the poweron of the TC358762 DSI-DPI bridge and controlling the backlight PWM. v2: Set the same default orientation as the closed source firmware used, which is the best for viewing angle. v3: Rewrite as an i2c client driver after bridge driver rejection. v4: Finish probe without the DSI host, using the new delayed registration, and attach to the host during mipi_dsi_driver probe. v5: Rework to drop the "probe without DSI host" mode again, now that vc4 will create the host early on. v6: Drop unused brightness #define (noticed by Thierry) Signed-off-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20170927193654.12609-4-eric@anholt.net Reviewed-by: Archit Taneja <architt@codeaurora.org> Acked-by: Thierry Reding <treding@nvidia.com>
2017-09-28 03:36:54 +08:00
config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
tristate "Raspberry Pi 7-inch touchscreen panel"
depends on DRM_MIPI_DSI
help
Say Y here if you want to enable support for the Raspberry
Pi 7" Touchscreen. To compile this driver as a module,
choose M here.
drm/panel: Add support for Raydium RM67191 panel driver This patch adds Raydium RM67191 TFT LCD panel driver (MIPI-DSI protocol). Signed-off-by: Robert Chiras <robert.chiras@nxp.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1561550907-9733-3-git-send-email-robert.chiras@nxp.com
2019-06-26 20:08:27 +08:00
config DRM_PANEL_RAYDIUM_RM67191
tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Raydium RM67191 FHD
(1080x1920) DSI panel.
drm/panel: Add support for Raydium RM68200 panel driver This patch adds Raydium Semiconductor Corporation RM68200 5.5" 720x1280 TFT LCD panel driver (MIPI-DSI video mode). Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180302153222.4377-3-philippe.cornu@st.com
2018-03-02 23:32:22 +08:00
config DRM_PANEL_RAYDIUM_RM68200
tristate "Raydium RM68200 720x1280 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
drm/panel: rm68200: Add backlight dependency Like many other panel drivers, this one fails to build when backlight support is disabled: drivers/gpu/drm/panel/panel-raydium-rm68200.o: In function `rm68200_probe': panel-raydium-rm68200.c:(.text+0x14a): undefined reference to `devm_of_find_backlight' This adds the appropriate dependency. Note that while include/linux/backlight.h provides a stub inline when backlight support is not enabled, this isn't enough to deal with the case where backlight support is built as a module but the panel driver is built-in, in which case linking will still fail as above. One way to avoid this is to add a dependency such as this: depends on BACKLIGHT_CLASS_DEVICE || BACKLIGHT_CLASS_DEVICE=n but that is rather complex and misses the point that the panel support is mostly useless without backlight support. Fixes: 2b7ed18bed1a ("drm/panel: Add support for Raydium RM68200 panel driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> [treding@nvidia.com: clarify the need for the dependency] Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180313210015.3344380-1-arnd@arndb.de
2018-03-14 04:59:54 +08:00
depends on BACKLIGHT_CLASS_DEVICE
drm/panel: Add support for Raydium RM68200 panel driver This patch adds Raydium Semiconductor Corporation RM68200 5.5" 720x1280 TFT LCD panel driver (MIPI-DSI video mode). Signed-off-by: Philippe Cornu <philippe.cornu@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180302153222.4377-3-philippe.cornu@st.com
2018-03-02 23:32:22 +08:00
help
Say Y here if you want to enable support for Raydium RM68200
720x1280 DSI video mode panel.
drm/panel: Add Rocktech jh057n00900 panel driver Support Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel. It is a MIPI DSI video mode panel. The panel seems to use a Sitronix ST7703 look alike (most of the commands look similar to the ST7703's data sheet but use a different number of parameters). The initial version of the DSI init sequence (including sleeps) were provided by the vendor. Sleeps were reduced considerably though to speed up initialization. Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1a9ce687be283c66dfb26d1dfb52a7bf695090fa.1554114302.git.agx@sigxcpu.org
2019-04-01 18:35:35 +08:00
config DRM_PANEL_ROCKTECH_JH057N00900
tristate "Rocktech JH057N00900 MIPI touchscreen panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Rocktech JH057N00900
MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a
resolution of 720x1440 pixels, a built in backlight and touch
controller.
Touch input support is provided by the goodix driver and needs to be
selected separately.
drm/panel: Add Ronbo RB070D30 panel The Ronbo RB070D30 panel is a MIPI-DSI panel based on a Fitipower EK79007 controller and a 1024x600 panel. Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Konstantin Sudakov <k.sudakov@integrasources.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/3cc43c6051e89a52434053a38a36621acab7236e.1550650810.git-series.maxime.ripard@bootlin.com
2019-02-20 16:21:56 +08:00
config DRM_PANEL_RONBO_RB070D30
tristate "Ronbo Electronics RB070D30 panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Ronbo Electronics
RB070D30 1024x600 DSI panel.
drm/panel: Add driver for Samsung S6D16D0 panel The Samsung S6D16D0 is a simple comman mode only DSI display that is used on the ST-Ericsson Ux500 reference design TVK1281618 user interface board (UIB). Cc: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-2-linus.walleij@linaro.org
2018-10-23 15:46:30 +08:00
config DRM_PANEL_SAMSUNG_S6D16D0
tristate "Samsung S6D16D0 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
select VIDEOMODE_HELPERS
drm/panel: Add support for S6E3HA2 panel driver on TM2 board This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel driver. This panel has 1440x2560 resolution in 5.7-inch physical panel in the TM2 device. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-03-08 09:42:36 +08:00
config DRM_PANEL_SAMSUNG_S6E3HA2
tristate "Samsung S6E3HA2 DSI video mode panel"
depends on OF
depends on DRM_MIPI_DSI
drm/panel: S6E3HA2 needs backlight code The new S6E3HA2 driver fails to link when backlight is disabled: ERROR: "backlight_device_register" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined! ERROR: "backlight_device_unregister" [drivers/gpu/drm/panel/panel-samsung-s6e3ha2.ko] undefined! This adds a Kconfig dependency like we have it for some other panel drivers. Fixes: ed29f9426d9b ("drm/panel: Add support for S6E3HA2 panel driver on TM2 board") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170419175939.189098-2-arnd@arndb.de
2017-04-20 01:59:18 +08:00
depends on BACKLIGHT_CLASS_DEVICE
drm/panel: Add support for S6E3HA2 panel driver on TM2 board This patch add support for MIPI-DSI based S6E3HA2 AMOLED panel driver. This panel has 1440x2560 resolution in 5.7-inch physical panel in the TM2 device. Signed-off-by: Donghwa Lee <dh09.lee@samsung.com> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-03-08 09:42:36 +08:00
select VIDEOMODE_HELPERS
drm/panel: Add support for S6E63J0X03 panel This patch adds MIPI-DSI based S6E63J0X03 AMOLED LCD panel driver which uses MIPI DSI bus to communicate with panel. The panel has 320×320 resolution in 1.63" physical panel. This panel is used in Samsung Galaxy Gear 2. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1499912443-3671-3-git-send-email-hoegeun.kwon@samsung.com
2017-07-13 10:20:42 +08:00
config DRM_PANEL_SAMSUNG_S6E63J0X03
tristate "Samsung S6E63J0X03 DSI command mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
drm/panel: Add driver for Samsung S6E63M0 panel This patch adds Samsung S6E63M0 AMOLED LCD panel driver, connected over spi. It's based on already removed, non-device-tree S6E63M0 driver and panel-samsung-ld9040. It can be found for example in some of Samsung Aries based phones. Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190222175153.20567-2-pawel.mikolaj.chmiel@gmail.com
2019-02-23 01:51:53 +08:00
config DRM_PANEL_SAMSUNG_S6E63M0
tristate "Samsung S6E63M0 RGB/SPI panel"
depends on OF
depends on SPI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Samsung S6E63M0
AMOLED LCD panel.
drm/panel: Add Samsung s6e88a0-ams452ef01 panel driver Add driver for Samsung AMS452EF01 AMOLED panel, which makes use of their S6E88A0 controller. Signed-off-by: Michael Srba <Michael.Srba@seznam.cz> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> [fixed checkpatch warnings, added changelog] Link: https://patchwork.freedesktop.org/patch/msgid/20200130203555.316-2-michael.srba@seznam.cz
2020-01-31 04:35:55 +08:00
config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
depends on OF
select DRM_MIPI_DSI
select VIDEOMODE_HELPERS
drm/panel: Add Samsung prefix to panel drivers The likelihood of getting a large number of panel drivers from different vendors is quite high. Add a prefix to the two existing Samsung panel drivers to set a guideline for future patch submissions. Using vendor prefixes consistently should allow a cleaner organization of the tree. Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-04-14 20:57:14 +08:00
config DRM_PANEL_SAMSUNG_S6E8AA0
tristate "Samsung S6E8AA0 DSI video mode panel"
drm/panel: add S6E8AA0 driver The patch adds MIPI-DSI based S6E8AA0 AMOLED LCD panel driver. Driver uses mipi_dsi bus to communicate with panel and exposes drm_panel interface. v2 - added bus error handling, - set maxmimum DSI packet size on init, - removed unsupported brightness drm_panel callbacks, - minor improvements v3 - switched to gpiod framework, - minor fixes in error handling Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2014-04-02 15:35:27 +08:00
depends on OF
select DRM_MIPI_DSI
select VIDEOMODE_HELPERS
drm/panel: Add driver for Seiko 43WVF1G panel Add driver for Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel. Datasheet available at: http://www.glyn.de/data/glyn/media/doc/43wvf1g-0.pdf Seiko 43WVF1G panel has two power supplies: avdd and dvdd and they require a specific power on/down sequence. For this reason the simple panel driver cannot be used to drive this panel, so create a new one heavily based on simple panel. Based on initial patch submission from Breno Lima. Signed-off-by: Marco Franchi <marco.franchi@nxp.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500567179-6967-1-git-send-email-marco.franchi@nxp.com
2017-07-21 00:12:59 +08:00
config DRM_PANEL_SEIKO_43WVF1G
tristate "Seiko 43WVF1G panel"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
Say Y here if you want to enable support for the Seiko
43WVF1G controller for 800x480 LCD panels
drm/panel: Add Sharp LQ101R1SX01 support This panel requires dual-channel mode. The device accepts command-mode data on 8 lanes and will therefore need a dual-channel DSI controller. The two interfaces that make up this device need to be instantiated in the controllers that gang up to provide the dual-channel DSI host. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-01 20:26:35 +08:00
config DRM_PANEL_SHARP_LQ101R1SX01
tristate "Sharp LQ101R1SX01 panel"
depends on OF
depends on DRM_MIPI_DSI
drm: panel/sharp: add backlight dependency The sharp panel code uses the backlight interface to find a device, which fails when backlight is disabled: drivers/built-in.o: In function `sharp_panel_probe': :(.text+0x5ceac): undefined reference to `of_find_backlight_by_node' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Dave Airlie <airlied@gmail.com>
2015-01-28 21:48:05 +08:00
depends on BACKLIGHT_CLASS_DEVICE
drm/panel: Add Sharp LQ101R1SX01 support This panel requires dual-channel mode. The device accepts command-mode data on 8 lanes and will therefore need a dual-channel DSI controller. The two interfaces that make up this device need to be instantiated in the controllers that gang up to provide the dual-channel DSI host. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-08-01 20:26:35 +08:00
help
Say Y here if you want to enable support for Sharp LQ101R1SX01
TFT-LCD modules. The panel has a 2560x1600 resolution and uses
24 bit RGB per pixel. It provides a dual MIPI DSI interface to
the host and has a built-in LED backlight.
To compile this driver as a module, choose M here: the module
will be called panel-sharp-lq101r1sx01.
drm/panel: Add driver for the Sharp LS037V7DW01 panel This panel is used on the TI SDP3430 board. The code is based on the omapdrm-specific panel-sharp-ls037v7dw01 driver. v2: - fix checkpatch warning (lcd == NULL) => (!lcd) (sam) - drop __exit_p() from remove. It caused a build warning. And no other panel drivers needs this (sam) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-7-laurent.pinchart@ideasonboard.com
2019-08-14 04:10:58 +08:00
config DRM_PANEL_SHARP_LS037V7DW01
tristate "Sharp LS037V7DW01 VGA LCD panel"
depends on GPIOLIB && OF && REGULATOR
help
Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
(480x640) LCD panel (found on the TI SDP3430 board).
drm/panel: Add Sharp LS043T1LE01 MIPI DSI panel The Sharp LS043T1LE01 is a 4.3", 540x960 TFT-LCD panel connected using two DSI lanes. It is for example found on the Qualcomm Snapdragon 800 Dragonboard (APQ8074). Signed-off-by: Werner Johansson <werner.johansson@sonymobile.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Thierry Reding <treding@nvidia.com>
2015-10-31 06:34:30 +08:00
config DRM_PANEL_SHARP_LS043T1LE01
tristate "Sharp LS043T1LE01 qHD video mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
(540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
drm/panel: Add Sitronix ST7701 panel driver ST7701 designed for small and medium sizes of TFT LCD display, is capable of supporting up to 480RGBX864 in resolution. It provides several system interfaces like MIPI/RGB/SPI. Currently added support for Techstar TS8550B which is ST7701 based 480x854, 2-lane MIPI DSI LCD panel. Driver now registering mipi_dsi device, but indeed it can extendable for RGB if any requirement trigger in future. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190124215131.17452-2-jagan@amarulasolutions.com
2019-01-25 05:51:31 +08:00
config DRM_PANEL_SITRONIX_ST7701
tristate "Sitronix ST7701 panel driver"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Sitronix
ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
system interfaces.
drm/panel: Add driver for sitronix ST7789V LCD controller The Sitronix ST7789v controller is used to drive 240x320 LCD panels through various interfaces, including SPI and RGB/Parallel. The current driver is configuring it for the latter. Support for tinyDRM can always be added later. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-03 21:38:32 +08:00
config DRM_PANEL_SITRONIX_ST7789V
tristate "Sitronix ST7789V panel"
depends on OF && SPI
drm/panel: add backlight dependency for sitronix-st7789v Without the dependency, we run into a link error: drivers/gpu/drm/panel/panel-sitronix-st7789v.o: In function `st7789v_probe': panel-sitronix-st7789v.c:(.text.st7789v_probe+0xc0): undefined reference to `of_find_backlight_by_node' Fixes: 7142afb3a186 ("drm/panel: Add driver for sitronix ST7789V LCD controller") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170419180326.303994-1-arnd@arndb.de
2017-04-20 02:03:08 +08:00
depends on BACKLIGHT_CLASS_DEVICE
drm/panel: Add driver for sitronix ST7789V LCD controller The Sitronix ST7789v controller is used to drive 240x320 LCD panels through various interfaces, including SPI and RGB/Parallel. The current driver is configuring it for the latter. Support for tinyDRM can always be added later. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
2017-04-03 21:38:32 +08:00
help
Say Y here if you want to enable support for the Sitronix
ST7789V controller for 240x320 LCD panels
drm/panel: Add driver for Sony ACX424AKP panel The Sony ACX424AKP is a command/videomode DSI panel for mobile devices. It is used on the ST-Ericsson HREF520 reference design. We support video mode by default, but it is possible to switch the panel into command mode by using the bool property "dsi-command-mode". Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200109072815.334867-1-linus.walleij@linaro.org
2020-01-09 15:28:15 +08:00
config DRM_PANEL_SONY_ACX424AKP
tristate "Sony ACX424AKP DSI command mode panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
Say Y here if you want to enable the Sony ACX424 display
panel. This panel supports DSI in both command and video
mode.
drm/panel: Add driver for the Sony ACX565AKM panel This panel is used on the Nokia N900. The code is based on the omapdrm-specific panel-sony-acx565akm driver. The hardware-related logic has been changed as little as possible to avoid regressions as hardware availability is lacking to test the changes. Follow-up patches should address the items listed in the TODO list. v2: - fix checkpatch warning (lcd == NULL) => (!lcd) (sam) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-8-laurent.pinchart@ideasonboard.com
2019-08-14 04:10:59 +08:00
config DRM_PANEL_SONY_ACX565AKM
tristate "Sony ACX565AKM panel"
depends on GPIOLIB && OF && SPI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Sony ACX565AKM
800x600 3.5" panel (found on the Nokia N900).
drm/panel: Add driver for the Toppoly TD028TTEC1 panel This panel is used on the OpenMoko Neo FreeRunner and Neo 1973. The code is based on the omapdrm-specific panel-tpo-td028ttec1 driver. v2: - fix checkpatch warnings: o (lcd == NULL) => (!lcd) (sam) o (1 << X) => BIT(X) (sam) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-9-laurent.pinchart@ideasonboard.com
2019-08-14 04:11:00 +08:00
config DRM_PANEL_TPO_TD028TTEC1
tristate "Toppoly (TPO) TD028TTEC1 panel driver"
depends on OF && SPI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for TPO TD028TTEC1 480x640
2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
drm/panel: Add driver for the Toppoly TD043MTEA1 panel This panel is used on the OMAP3 Pandora. The code is based on the omapdrm-specific panel-tpo-td043mtea1 driver. v2: - fix checkpatch warnings o (lcd == NULL) => (!lcd) (sam) o alignment to open '(' (sam) Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190813201101.30980-10-laurent.pinchart@ideasonboard.com
2019-08-14 04:11:01 +08:00
config DRM_PANEL_TPO_TD043MTEA1
tristate "Toppoly (TPO) TD043MTEA1 panel driver"
depends on GPIOLIB && OF && REGULATOR && SPI
help
Say Y here if you want to enable support for TPO TD043MTEA1 800x480
4.3" panel (found on the OMAP3 Pandora board).
drm/panel: Add a driver for the TPO TPG110 The TPO (Toppoly) TPG110 is a pretty generic display driver similar in vein to the Ilitek 93xx devices. It is not a panel per se but a driver used with several low-cost noname panels. This is used on the Nomadik NHK15 combined with a OSD OSD057VA01CT display for WVGA 800x480. The driver is pretty minimalistic right now but can be extended to handle non-default polarities, gamma correction etc. The driver is based on the baked-in code in drivers/video/fbdev/amba-clcd-nomadik.c which will be decomissioned once this us upstream. Cc: Noralf Trønnes <noralf@tronnes.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190111175406.27646-1-linus.walleij@linaro.org
2019-01-12 01:54:06 +08:00
config DRM_PANEL_TPO_TPG110
tristate "TPO TPG 800x400 panel"
depends on OF && SPI && GPIOLIB
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for TPO TPG110
400CH LTPS TFT LCD Single Chip Digital Driver for up to
800x400 LCD panels.
drm/panel: Add support for Truly NT35597 panel driver Add support for Truly NT35597 panel driver used in MSM reference platforms. This panel driver supports both single DSI and dual DSI modes. However, this patch series adds support only for dual DSI mode. Changes in v10: - None Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/1538787139-28122-1-git-send-email-abhinavk@codeaurora.org
2018-10-06 08:52:18 +08:00
config DRM_PANEL_TRULY_NT35597_WQXGA
tristate "Truly WQXGA"
depends on OF
depends on DRM_MIPI_DSI
help
Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
Video Mode panel
drm/panel: add panel driver for Xinpeng XPP055C272 panels Base on the somewhat similar Rocktech driver but adapted for panel-specific init of the XPP055C272. changes in v5: - drop error message when backlight not found, no other panel does that and if needed it should live in drm_panel_of_backlight changes in v4: none changes in v3: - remove wrong negative sync flags from display-mode to fix a display artifact of the output getting move a tiny bit to the right changes in v2: - move to drm-panel-internal backlight handling (Sam) - adapt to changes that happened to drm_panel structs+functions (Sam) - sort includes (Sam) - drop unnecessary DRV_NAME constant (Sam) - do mipi_dsi_dcs_exit_sleep_mode and mipi_dsi_dcs_set_display_on in panel prepare (not init_sequence) to keep symmetric (Sam) Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191224112907.30758-3-heiko@sntech.de
2019-12-24 19:29:07 +08:00
config DRM_PANEL_XINPENG_XPP055C272
tristate "Xinpeng XPP055C272 panel driver"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Xinpeng
XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
system interfaces.
drm/panel: Add simple panel support Add a driver for simple panels. Such panels can have a regulator that provides the supply voltage and a separate GPIO to enable the panel. Optionally the panels can have a backlight associated with them so it can be enabled or disabled according to the panel's power management mode. Support is added for two panels: An AU Optronics 10.1" WSVGA and a Chunghwa Picture Tubes 10.1" WXGA panel. Signed-off-by: Thierry Reding <treding@nvidia.com>
2013-08-30 21:10:14 +08:00
endmenu