UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/gpu/drm/i915/i915_params.c

256 lines
10 KiB
C
Raw Normal View History

drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
drm/i915: Decouple struct i915_params i915 into i915_params.h Otherwise usage in the i915 debug macros yields problems due to i915_drv.h <-> i915_trace.h <-> intel_drv.h include loops. v2: - Document not-so-obvious need for linux/cache.h (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450436898-20408-2-git-send-email-joonas.lahtinen@linux.intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-12-18 19:08:15 +08:00
#include "i915_params.h"
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
#include "i915_drv.h"
struct i915_params i915 __read_mostly = {
.modeset = -1,
.panel_ignore_lid = 1,
.semaphores = -1,
.lvds_channel_mode = 0,
.panel_use_ssc = -1,
.vbt_sdvo_panel_type = -1,
.enable_rc6 = -1,
drm/i915/gen9: Add boot parameter for disabling DC6 v2: Use _unsafe (Jani) v3: Allow specifying specific DC-states instead of just DC6 (Imre) Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447682467-6237-3-git-send-email-patrik.jakobsson@linux.intel.com
2015-11-16 22:01:06 +08:00
.enable_dc = -1,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.enable_fbc = -1,
drm/i915/bdw: Enable execlists by default where supported Execlist support in the i915 driver is now considered good enough for the feature to be enabled by default on Gen8 and later and routinely tested. Adjusted i915 parameters structure initialization to reflect this and updated the comment in intel_sanitize_enable_execlists(). There's still work to do before we can let the wider massive onto it, but there's still time left before the 3.20 cutoff. v2: Update the MODULE_PARM_DESC too. Issue: VIZ-2020 Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> [danvet: Add note that there's still some work left to do.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 20:48:35 +08:00
.enable_execlists = -1,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.enable_hangcheck = true,
.enable_ppgtt = -1,
drm/i915: Change i915.enable_psr parameter to use per platform default. This will give us flexibility to enable PSR by default independently so issues and corner cases in one platform won't affect others were we have it working properly. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-02-12 20:08:11 +08:00
.enable_psr = -1,
drm/i915: rename preliminary_hw_support to alpha_support The term "preliminary hardware support" has always caused confusion both among users and developers. It has always been about preliminary driver support for new hardware, and not so much about preliminary hardware. Of course, initially both the software and hardware are in early stages, but the distinction becomes more clear when the user picks up production hardware and an older kernel to go with it, with just the early support we had for the hardware at the time the kernel was released. The user has to specifically enable the alpha quality *driver* support for the hardware in that specific kernel version. Rename preliminary_hw_support to alpha_support to emphasize that the module parameter, config option, and flag are about software, not about hardware. Improve the language in help texts and debug logging as well. This appears to be a good time to do the change, as there are currently no platforms with preliminary^W alpha support. Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477909108-18696-1-git-send-email-jani.nikula@intel.com
2016-10-31 18:18:28 +08:00
.alpha_support = IS_ENABLED(CONFIG_DRM_I915_ALPHA_SUPPORT),
drm/i915/skl: disable display side power well support for now The display power well support on this platform is in a somewhat broken state atm, so disable it by default. This in effect will get rid of incorrect assert WARNs about the CSR/DMC firmware not being loaded during power well toggling. It also removes a problem during driver loading where a register is accessed while its backing power well is down, resulting in another WARN. Until we come up with the root cause of the second problem and the proper fix for both issues, keep all display side power wells on. Also clarify a bit the option description. Reported-by: Dave Airlie <airlied@redhat.com> Reference: http://mid.gmane.org/CAPM=9tyjBQjSBTKa49cRr6SYkpNW7Pq-fUFznZZ8Y1snvvk7mA@mail.gmail.com Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446757451-2777-1-git-send-email-imre.deak@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-11-06 05:04:11 +08:00
.disable_power_well = -1,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.enable_ips = 1,
Revert "drm/i915: skip modeset if compatible for everyone." This reverts commit 6764e9f8724f1231b4deac53b9a82286ac0830e7 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Thu Aug 27 15:44:06 2015 +0200 drm/i915: skip modeset if compatible for everyone. Bring back the i915.fastboot module parameter, disabled by default, due to backlight regression on Chromebook Pixel 2015. Apparently the firmware of the Chromebook in question enables the panel but disables backlight to avoid a brief garbage scanout upon loading the kernel/module. With fastboot, we leave the backlight untouched, in this case disabled. The user would have to do a modeset (i.e. not just crank up the brightness) to enable the backlight. There is no clean fix readily available, so get back to the drawing board by reverting. [N.B. The reference below is for when the thread was included on public lists, and some of the context had already been dropped by then.] Reported-and-tested-by: Olof Johansson <olof@lixom.net> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> References: http://marc.info/?i=CAKMK7uES7xk05ki92oeX6gmvZWAh9f2vL7yz=6T+fGK9J3X7cQ@mail.gmail.com Fixes: 6764e9f8724f ("drm/i915: skip modeset if compatible for everyone.") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447921590-3785-1-git-send-email-jani.nikula@intel.com
2015-11-19 16:26:30 +08:00
.fastboot = 0,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.prefault_disable = 0,
drm/i915: Add module param to test the load detect code This is useful for writing igts to make sure we don't break this, without being forced to own a one of these dinosaurs. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-04 01:03:47 +08:00
.load_detect_test = 0,
drm/i915: Add a way to test the modeset done during gpu reset, v3. Add force_reset_modeset_test as a parameter to force the modeset path during gpu reset. This allows a IGT test to set the knob and trigger a hang to force the gpu reset, even on platforms that wouldn't otherwise require it. Changes since v1: - Split out fix to separate commit. Changes since v2: - This commit is purely about force_reset_modeset_test now. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Testcase: drv_hangman.reset-with-forced-modeset Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-3-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-08-06 04:28:28 +08:00
.force_reset_modeset_test = 0,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.reset = true,
drm/i915: Allow disabling error capture We currently capture the GPU state after we detect a hang. This is vital for us to both triage and debug hangs in the wild (post-mortem debugging). However, it comes at the cost of running some potentially dangerous code (since it has to make very few assumption about the state of the driver) that is quite resource intensive. This patch introduces both a method to disable error capture at runtime (for users who hit bugs at runtime and need a workaround) and to disable error capture at compiletime (for realtime users who want to minimise any possible latency, and never require error capture, saving ~30k of code). The cost is that we now have to be wary of (and test!) a kconfig flag and a module parameter. The effect of the module parameter is easy to verify through code inspection and runtime testing, but a kconfig flag needs regular compile checking. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/20161012090522.367-2-chris@chris-wilson.co.uk
2016-10-12 17:05:18 +08:00
.error_capture = true,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
.invert_brightness = 0,
drm/i915: Provide a command line option to disable display If we can't actually determine at run-time we have a fused-off display, provide at least an option to disable it. v2: Move the i915.disable_display test in a separate check (Daniel Vetter) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11 01:20:55 +08:00
.disable_display = 0,
drm/i915: Use the precomputed value for whether to enable command parsing As i915.enable_cmd_parser is an unsafe option, make it read-only at runtime. Now that it is constant, we can use the value determined during initialisation as to whether we need the cmdparser at execbuffer time. v2: Remove the inline for its single user, it is clear enough (and shorter) without! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161124125851.6615-1-chris@chris-wilson.co.uk
2016-11-24 20:58:51 +08:00
.enable_cmd_parser = true,
drm/i915: Revert async unpin and nonblocking atomic commit This reverts the following patches: d55dbd06bb5e1399aba9ab5227465339d1bbefff drm/i915: Allow nonblocking update of pageflips. 15c86bdb760185e871c7a0f559978328aa500971 drm/i915: Check for unpin correctness. 95c2ccdc82d520f59ae3b6fdc097b63c9b7082bb Reapply "drm/i915: Avoid stalling on pending flips for legacy cursor updates" a6747b7304a9d66758a196d885dab8bbfa5e7d1f drm/i915: Make unpin async. 03f476e1fcb42fca88fc50b94b0d3adbdbe887f0 drm/i915: Prepare connectors for nonblocking checks. 2099deffef4404f949ba1b68d2b17e0608190bc2 drm/i915: Pass atomic states to fbc update functions. ee7171af72c39c18b7d7571419a4ac6ca30aea66 drm/i915: Remove reset_counter from intel_crtc. 2ee004f7c59b2e642f0bb2834f847d756f2dd7b7 drm/i915: Remove queue_flip pointer. b8d2afae557dbb9b9c7bc6f6ec4f5278f3c4c34e drm/i915: Remove use_mmio_flip kernel parameter. 8dd634d922615ec3a9af7976029110ec037f8b50 drm/i915: Remove cs based page flip support. 143f73b3bf48c089b40f58462dd7f7c199fd4f0f drm/i915: Rework intel_crtc_page_flip to be almost atomic, v3. 84fc494b64e8c591be446a966b7447a9db519c88 drm/i915: Add the exclusive fence to plane_state. 6885843ae164e11f6c802209d06921e678a3f3f3 drm/i915: Convert flip_work to a list. aa420ddd8eeaa5df579894a412289e4d07c2fee9 drm/i915: Allow mmio updates on all platforms, v2. afee4d8707ab1f21b7668de995be3a5961e83582 Revert "drm/i915: Avoid stalling on pending flips for legacy cursor updates" "drm/i915: Allow nonblocking update of pageflips" should have been split up, misses a proper commit message and seems to cause issues in the legacy page_flip path as demonstrated by kms_flip. "drm/i915: Make unpin async" doesn't handle the unthrottled cursor updates correctly, leading to an apparent pin count leak. This is caught by the WARN_ON in i915_gem_object_do_pin which screams if we have more than DRM_I915_GEM_OBJECT_MAX_PIN_COUNT pins. Unfortuantely we can't just revert these two because this patch series came with a built-in bisect breakage in the form of temporarily removing the unthrottled cursor update hack for legacy cursor ioctl. Therefore there's no other option than to revert the entire pile :( There's one tiny conflict in intel_drv.h due to other patches, nothing serious. Normally I'd wait a bit longer with doing a maintainer revert, but since the minimal set of patches we need to revert (due to the bisect breakage) is so big, time is running out fast. And very soon (especially after a few attempts at fixing issues) it'll be really hard to revert things cleanly. Lessons learned: - Not a good idea to rush the review (done by someone fairly new to the area) and not make sure domain experts had a chance to read it. - Patches should be properly split up. I only looked at the two patches that should be reverted in detail, but both look like the mix up different things in one patch. - Patches really should have proper commit messages. Especially when doing more than one thing, and especially when touching critical and tricky core code. - Building a patch series and r-b stamping it when it has a built-in bisect breakage is not a good idea. - I also think we need to stop building up technical debt by postponing atomic igt testcases even longer. I think it's clear that there's enough corner cases in this beast that we really need to have the testcases _before_ the next step lands. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-05-24 23:13:53 +08:00
.use_mmio_flip = 0,
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-17 04:49:29 +08:00
.mmio_debug = 0,
drm/i915: tame the chattermouth (v2) Many distro's have mechanism in place to collect and automatically file bugs for failed WARN()s. And since i915 has a lot of hw state sanity checks which result in WARN(), it generates quite a lot of noise which is somewhat disconcerting to the end user. Separate out the internal hw-is-in-the-state-I-expected checks into I915_STATE_WARN()s and allow configuration via i915.verbose_checks module param about whether this will generate a full blown stacktrace or just DRM_ERROR(). The new moduleparam defaults to true, so by default there is no change in behavior. And even when disabled, you will still get an error message logged. v2: paint the macro names blue, clarify that the default behavior remains the same as before Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-16 02:56:32 +08:00
.verbose_state_checks = 1,
Partially revert "drm/i915: Use full atomic modeset." This partially reverts commit 74c090b1bdc57b1c9f1361908cca5a3d8a80fb08. The DRIVER_ATOMIC cap cannot yet be exported because i915 lacks async support. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-26 15:29:56 +08:00
.nuclear_pageflip = 0,
drm/i915/skl: Add module parameter to select edp vswing table This provides an option to override the value set by VBT for selecting edp Vswing Pre-emph setting table. v2: Adding comment about this being a temporary workaround and making the parameter read-only (Jani) v3: Changing mode to 0400 instead of 0 (Jani) https://bugs.freedesktop.org/show_bug.cgi?id=89554 Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-06 20:05:48 +08:00
.edp_vswing = 0,
drm/i915/guc: Revert "drm/i915/guc: enable GuC loading & submission by default" This reverts commit 041824ee25cfc535ba2d9a22c217df735ea2471e. We have latency issues that might impact the performance: #96606. and hangs and loading issues on resume after S4: #96526. This is also blocking a platform milestone so let's disable this for now while we make sure we don't have any more loading issue, or related basic hangs and it pass BAT for real in all platofmrs. In case BAT is wrong let's first fix BAT before re-enable it here. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96606 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96526 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Stable <stable@vger.kernel.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Christophe Prigent <christophe.prigent@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468884477-30086-1-git-send-email-rodrigo.vivi@intel.com
2016-07-19 07:27:57 +08:00
.enable_guc_loading = 0,
.enable_guc_submission = 0,
drm/i915: Add GuC-related module parameters Two new module parameters: "enable_guc_submission" which will turn on submission of batchbuffers via the GuC (when implemented), and "guc_log_level" which controls the level of debugging logged by the GuC and captured by the host. Signed-off-by: Alex Dai <yu.dai@intel.com> v4: Mark "enable_guc_submission" unsafe [Daniel Vetter] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-10 02:29:03 +08:00
.guc_log_level = -1,
drm/i915/uc: Add params for specifying firmware `guc_firmware_path` and `huc_firmware_path` module parameters are added. Using the parameter disables version checks and loads desired firmware instead of the default one. v2: make params unsafe && notice about disabled fw check (J. Lahtinen) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-14 22:28:14 +08:00
.guc_firmware_path = NULL,
.huc_firmware_path = NULL,
drm/i915: add module param "enable_dp_mst" Adds an (unsafe; auto-kernel-tainting) boolean module parameter to the i915 drm driver: "enable_dp_mst", which is enabled by default. Disabling the parameter forces newly connected DisplayPort sinks to report as not supporting multi-stream transport (MST), thus "forcing" the use of single-stream transport (SST). v2: rename parameter to conform to style v3: add signoff Signed-off-by: Nathan Schulte <nmschulte@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458054845-5837-1-git-send-email-nmschulte@gmail.com
2016-03-15 23:14:05 +08:00
.enable_dp_mst = true,
drm/i915: Add fault injection support Add support for forcing an error at selected places in the driver. As an example add 4 options to fail during driver loading. Requested by Chris. v2: - Add fault point for modeset initialization - Print debug message when injecting an error v3: - Rename inject_fault to inject_load_failure, rename the related macros and helper accordingly (Chris) - Use a counter instead of a mask to identify the failure point (Daniel) - Mark the module option as _unsafe and keep i915_params ordered (Joonas) v4: - Rebase on latest -nightly v5: - Use DRM_INFO instead of DRM_DEBUG_DRIVER, making it clearer in CI reports that a following error message is expected (IRC r-b from Chris on v5) CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Daniel Vetter <daniel.vetter@ffwll.ch> CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-03-16 19:39:08 +08:00
.inject_load_failure = 0,
drm/i915: Add Backlight Control using DPCD for eDP connectors (v9) This patch adds support for eDP backlight control using DPCD registers to backlight hooks in intel_panel. It checks for backlight control over AUX channel capability and sets up function pointers to get and set the backlight brightness level if supported. v2: Moved backlight functions from intel_dp.c into a new file intel_dp_aux_backlight.c. Also moved reading of eDP display control registers to intel_dp_get_dpcd v3: Correct some formatting mistakes v4: Updated to use AUX backlight control if PWM control is not possible (Jani) v5: Moved call to initialize backlight registers to dp_aux_setup_backlight v6: Check DP_EDP_BACKLIGHT_PIN_ENABLE_CAP is disabled before setting up AUX backlight control. To fix BLM_PWM_ENABLE igt test warnings on bdw_ultra v7: Add enable_dpcd_backlight module parameter. v8: Rebase onto latest drm-intel-nightly branch v9: Remove changes to intel_dp_dpcd_read_wake Split addition edp_dpcd variable into a separate patch Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Yetunde Adebisi <yetundex.adebisi@intel.com> [Jani: whitepace changes to appease checkpatch] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459865452-9138-4-git-send-email-yetundex.adebisi@intel.com
2016-04-05 22:10:52 +08:00
.enable_dpcd_backlight = false,
drm/i915: gvt: Introduce the basic architecture of GVT-g This patch introduces the very basic framework of GVT-g device model, includes basic prototypes, definitions, initialization. v12: - Call intel_gvt_init() in driver early initialization stage. (Chris) v8: - Remove the GVT idr and mutex in intel_gvt_host. (Joonas) v7: - Refine the URL link in Kconfig. (Joonas) - Refine the introduction of GVT-g host support in Kconfig. (Joonas) - Remove the macro GVT_ALIGN(), use round_down() instead. (Joonas) - Make "struct intel_gvt" a data member in struct drm_i915_private.(Joonas) - Remove {alloc, free}_gvt_device() - Rename intel_gvt_{create, destroy}_gvt_device() - Expost intel_gvt_init_host() - Remove the dummy "struct intel_gvt" declaration in intel_gvt.h (Joonas) v6: - Refine introduction in Kconfig. (Chris) - The exposed API functions will take struct intel_gvt * instead of void *. (Chris/Tvrtko) - Remove most memebers of strct intel_gvt_device_info. Will add them in the device model patches.(Chris) - Remove gvt_info() and gvt_err() in debug.h. (Chris) - Move GVT kernel parameter into i915_params. (Chris) - Remove include/drm/i915_gvt.h, as GVT-g will be built within i915. - Remove the redundant struct i915_gvt *, as the functions in i915 will directly take struct intel_gvt *. - Add more comments for reviewer. v5: Take Tvrtko's comments: - Fix the misspelled words in Kconfig - Let functions take drm_i915_private * instead of struct drm_device * - Remove redundant prints/local varible initialization v3: Take Joonas' comments: - Change file name i915_gvt.* to intel_gvt.* - Move GVT kernel parameter into intel_gvt.c - Remove redundant debug macros - Change error handling style - Add introductions for some stub functions - Introduce drm/i915_gvt.h. Take Kevin's comments: - Move GVT-g host/guest check into intel_vgt_balloon in i915_gem_gtt.c v2: - Introduce i915_gvt.c. It's necessary to introduce the stubs between i915 driver and GVT-g host, as GVT-g components is configurable in kernel config. When disabled, the stubs here do nothing. Take Joonas' comments: - Replace boolean return value with int. - Replace customized info/warn/debug macros with DRM macros. - Document all non-static functions like i915. - Remove empty and unused functions. - Replace magic number with marcos. - Set GVT-g in kernel config to "n" by default. Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-5-git-send-email-zhi.a.wang@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-06-16 20:07:00 +08:00
.enable_gvt = false,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
};
module_param_named(modeset, i915.modeset, int, 0400);
MODULE_PARM_DESC(modeset,
drm/i915: Fix up KMS Kconfig removal patch The module pciid list got lost, but somehow most distros seem to force-load drm drivers early and no one noticed for a while. Bug introduced in commit fd930478fb797e4cbaa799d9ddd970e9a1fa1b4a Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Jun 19 20:27:27 2015 +0100 drm/i915: Remove KMS Kconfig option Reported-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2015-06-23 19:57:47 +08:00
"Use kernel modesetting [KMS] (0=disable, "
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"1=on, -1=force vga console preference [default])");
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(panel_ignore_lid,
"Override lid status (0=autodetect, 1=autodetect disabled [default], "
"-1=force lid closed, -2=force lid open)");
drm/i915: taint the kernel if unsafe module parameters are set Taint the kernel if the semaphores, enable_rc6, enable_fbc, or ppgtt module parameters are modified. These module parameters are for debugging and testing only, and should never be changed from their platform specific default values by the users. We do not provide support for people enabling all the experimental features. Make this clear by tainting the kernel if the parameters are set. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27 04:54:23 +08:00
module_param_named_unsafe(semaphores, i915.semaphores, int, 0400);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(semaphores,
"Use semaphores for inter-ring sync "
"(default: -1 (use per-chip defaults))");
drm/i915: taint the kernel if unsafe module parameters are set Taint the kernel if the semaphores, enable_rc6, enable_fbc, or ppgtt module parameters are modified. These module parameters are for debugging and testing only, and should never be changed from their platform specific default values by the users. We do not provide support for people enabling all the experimental features. Make this clear by tainting the kernel if the parameters are set. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27 04:54:23 +08:00
module_param_named_unsafe(enable_rc6, i915.enable_rc6, int, 0400);
drm/i915: drop i915_ prefix from enable_rc6, enable_fbc, enable_ppgtt parameters Having to use i915.i915_foo is inconsistent and a bit on the verbose side. Drop the prefix per Daniel's request, who also says this is not ABI we need to maintain. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27 21:26:38 +08:00
MODULE_PARM_DESC(enable_rc6,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"Enable power-saving render C-state 6. "
"Different stages can be selected via bitmask values "
"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
"default: -1 (use per-chip default)");
drm/i915/gen9: Add boot parameter for disabling DC6 v2: Use _unsafe (Jani) v3: Allow specifying specific DC-states instead of just DC6 (Imre) Signed-off-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447682467-6237-3-git-send-email-patrik.jakobsson@linux.intel.com
2015-11-16 22:01:06 +08:00
module_param_named_unsafe(enable_dc, i915.enable_dc, int, 0400);
MODULE_PARM_DESC(enable_dc,
"Enable power-saving display C-states. "
"(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6)");
drm/i915: taint the kernel if unsafe module parameters are set Taint the kernel if the semaphores, enable_rc6, enable_fbc, or ppgtt module parameters are modified. These module parameters are for debugging and testing only, and should never be changed from their platform specific default values by the users. We do not provide support for people enabling all the experimental features. Make this clear by tainting the kernel if the parameters are set. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27 04:54:23 +08:00
module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, 0600);
drm/i915: drop i915_ prefix from enable_rc6, enable_fbc, enable_ppgtt parameters Having to use i915.i915_foo is inconsistent and a bit on the verbose side. Drop the prefix per Daniel's request, who also says this is not ABI we need to maintain. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27 21:26:38 +08:00
MODULE_PARM_DESC(enable_fbc,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"Enable frame buffer compression for power savings "
"(default: -1 (use per-chip default))");
drm/i915: drop write perm from module params which don't support changing We've given write permissions to dynamically change some module parameters through /sys/module/i915/parameters although they only support setting on module load. Fix the permissions. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455621493-6865-1-git-send-email-jani.nikula@intel.com
2016-02-16 19:18:12 +08:00
module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int, 0400);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(lvds_channel_mode,
"Specify LVDS channel mode "
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(lvds_use_ssc,
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
"(default: auto from VBT)");
drm/i915: drop write perm from module params which don't support changing We've given write permissions to dynamically change some module parameters through /sys/module/i915/parameters although they only support setting on module load. Fix the permissions. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455621493-6865-1-git-send-email-jani.nikula@intel.com
2016-02-16 19:18:12 +08:00
module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0400);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(vbt_sdvo_panel_type,
"Override/Ignore selection of SDVO panel mode in the VBT "
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
drm/i915: Report an error when i915.reset prevents a reset If the user disables the GPU reset using the i915.reset parameter and one occurs, report that we failed to reset the GPU. If we return early, as we currently do, then we leave all state intact (with a hung GPU) and clients block forever waiting for their requests to complete. Testcase: igt/gem_eio Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Mark i915.reset as an unsafe modoption, as discussed with Chris.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-06-18 18:42:08 +08:00
module_param_named_unsafe(reset, i915.reset, bool, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
drm/i915: Allow disabling error capture We currently capture the GPU state after we detect a hang. This is vital for us to both triage and debug hangs in the wild (post-mortem debugging). However, it comes at the cost of running some potentially dangerous code (since it has to make very few assumption about the state of the driver) that is quite resource intensive. This patch introduces both a method to disable error capture at runtime (for users who hit bugs at runtime and need a workaround) and to disable error capture at compiletime (for realtime users who want to minimise any possible latency, and never require error capture, saving ~30k of code). The cost is that we now have to be wary of (and test!) a kconfig flag and a module parameter. The effect of the module parameter is easy to verify through code inspection and runtime testing, but a kconfig flag needs regular compile checking. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/20161012090522.367-2-chris@chris-wilson.co.uk
2016-10-12 17:05:18 +08:00
#if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR)
module_param_named(error_capture, i915.error_capture, bool, 0600);
MODULE_PARM_DESC(error_capture,
"Record the GPU state following a hang. "
"This information in /sys/class/drm/card<N>/error is vital for "
"triaging and debugging hangs.");
#endif
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(enable_hangcheck,
"Periodically check GPU activity for detecting hangs. "
"WARNING: Disabling this can cause system wide hangs. "
"(default: true)");
drm/i915: taint the kernel if unsafe module parameters are set Taint the kernel if the semaphores, enable_rc6, enable_fbc, or ppgtt module parameters are modified. These module parameters are for debugging and testing only, and should never be changed from their platform specific default values by the users. We do not provide support for people enabling all the experimental features. Make this clear by tainting the kernel if the parameters are set. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-08-27 04:54:23 +08:00
module_param_named_unsafe(enable_ppgtt, i915.enable_ppgtt, int, 0400);
drm/i915: drop i915_ prefix from enable_rc6, enable_fbc, enable_ppgtt parameters Having to use i915.i915_foo is inconsistent and a bit on the verbose side. Drop the prefix per Daniel's request, who also says this is not ABI we need to maintain. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-27 21:26:38 +08:00
MODULE_PARM_DESC(enable_ppgtt,
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
"Override PPGTT usage. "
drm/i915/gen8: Flip the 48b switch Use 48b addresses if hw supports it (i915.enable_ppgtt=3). Update the sanitize_enable_ppgtt for 48 bit PPGTT mode. Note, aliasing PPGTT remains 32b only. v2: s/full_64b/full_48b/. (Akash) v3: Add sanitize_enable_ppgtt changes until here. (Akash) v4: Update param description (Chris) Cc: Akash Goel <akash.goel@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-30 22:36:19 +08:00
"(-1=auto [default], 0=disabled, 1=aliasing, 2=full, 3=full with extended address space)");
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(enable_execlists, i915.enable_execlists, int, 0400);
drm/i915/bdw: Macro for LRCs and module option for Execlists GEN8 brings an expansion of the HW contexts: "Logical Ring Contexts". These expanded contexts enable a number of new abilities, especially "Execlists". The macro is defined to off until we have things in place to hope to work. v2: Rename "advanced contexts" to the more correct "logical ring contexts". v3: Add a module parameter to enable execlists. Execlist are relatively new, and so it'd be wise to be able to switch back to ring submission to debug subtle problems that will inevitably arise. v4: Add an intel_enable_execlists function. v5: Sanitize early, as suggested by Daniel. Remove lrc_enabled. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v3) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2, v4 & v5) Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:11 +08:00
MODULE_PARM_DESC(enable_execlists,
"Override execlists usage. "
drm/i915/bdw: Enable execlists by default where supported Execlist support in the i915 driver is now considered good enough for the feature to be enabled by default on Gen8 and later and routinely tested. Adjusted i915 parameters structure initialization to reflect this and updated the comment in intel_sanitize_enable_execlists(). There's still work to do before we can let the wider massive onto it, but there's still time left before the 3.20 cutoff. v2: Update the MODULE_PARM_DESC too. Issue: VIZ-2020 Signed-off-by: Thomas Daniel <thomas.daniel@intel.com> [danvet: Add note that there's still some work left to do.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 20:48:35 +08:00
"(-1=auto [default], 0=disabled, 1=enabled)");
drm/i915/bdw: Macro for LRCs and module option for Execlists GEN8 brings an expansion of the HW contexts: "Logical Ring Contexts". These expanded contexts enable a number of new abilities, especially "Execlists". The macro is defined to off until we have things in place to hope to work. v2: Rename "advanced contexts" to the more correct "logical ring contexts". v3: Add a module parameter to enable execlists. Execlist are relatively new, and so it'd be wise to be able to switch back to ring submission to debug subtle problems that will inevitably arise. v4: Add an intel_enable_execlists function. v5: Sanitize early, as suggested by Daniel. Remove lrc_enabled. Signed-off-by: Ben Widawsky <ben@bwidawsk.net> (v1) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> (v3) Signed-off-by: Oscar Mateo <oscar.mateo@intel.com> (v2, v4 & v5) Reviewed-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-25 00:04:11 +08:00
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);
drm/i915: Instrument PSR parameter for debuging with link standby x link off. Unfortunately we don't know all panels and platforms out there and we found internal prototypes without VBT proper set but where only link in standby worked well. So, before enable PSR by default let's instrument the PSR parameter in a way that we can identify different panels out there that might require or work better with link standby mode. It is also useful to say that for backward compatibility I'm not changing the meaning of this flag. So "0" still means disabled and "1" means enabled with full support and maximum power savings. v2: Use positive value instead of negative for different operation mode as suggested by Daniel. v3: As Paulo suggested use 2 to force link standby and 3 to force link fully on. Also split the link_standby introduction in a separated patch. v4: Use DRM_ERROR for link off request on platforms that don't support and Remove the quirk promise. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1454356928-19779-1-git-send-email-rodrigo.vivi@intel.com
2016-02-02 04:02:08 +08:00
MODULE_PARM_DESC(enable_psr, "Enable PSR "
drm/i915: Change i915.enable_psr parameter to use per platform default. This will give us flexibility to enable PSR by default independently so issues and corner cases in one platform won't affect others were we have it working properly. Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-02-12 20:08:11 +08:00
"(0=disabled, 1=enabled - link mode chosen per-platform, 2=force link-standby mode, 3=force link-off mode) "
"Default: -1 (use per-chip default)");
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
drm/i915: Use bool i915_param.alpha_support The alpha_support module option can only take one of two values, so assign it to a boolean type. The only advantage is in pretty printing via /sys/module/i915/parameters/alpha_support and elsewhere. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170206213608.31328-2-chris@chris-wilson.co.uk
2017-02-07 05:36:06 +08:00
module_param_named_unsafe(alpha_support, i915.alpha_support, bool, 0400);
drm/i915: rename preliminary_hw_support to alpha_support The term "preliminary hardware support" has always caused confusion both among users and developers. It has always been about preliminary driver support for new hardware, and not so much about preliminary hardware. Of course, initially both the software and hardware are in early stages, but the distinction becomes more clear when the user picks up production hardware and an older kernel to go with it, with just the early support we had for the hardware at the time the kernel was released. The user has to specifically enable the alpha quality *driver* support for the hardware in that specific kernel version. Rename preliminary_hw_support to alpha_support to emphasize that the module parameter, config option, and flag are about software, not about hardware. Improve the language in help texts and debug logging as well. This appears to be a good time to do the change, as there are currently no platforms with preliminary^W alpha support. Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477909108-18696-1-git-send-email-jani.nikula@intel.com
2016-10-31 18:18:28 +08:00
MODULE_PARM_DESC(alpha_support,
"Enable alpha quality driver support for latest hardware. "
"See also CONFIG_DRM_I915_ALPHA_SUPPORT.");
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
drm/i915: fix handling of the disable_power_well module option When this option is 0 (so the power well support is disabled) we are supposed to enable all power wells once and don't disable them unless we system suspend the device. Currently if the option is 0, we can call the power well enable handlers multiple times, whenever their refcount changes from 0->1. This may not be a problem for the HW, but it's not logical and may trigger some warnings in the power well code which doesn't expect this. So simply keep around a reference while we are not system suspended to solve this. For simplicity mark the module option read only, so we don't need to deal with re-enabling the feature during runtime. If someone really needs that it could be added later in a more proper way. v2: - fix typo in comment in intel_power_domains_suspend() (Patrik) Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447775063-24438-1-git-send-email-imre.deak@intel.com
2015-11-17 23:44:23 +08:00
module_param_named_unsafe(disable_power_well, i915.disable_power_well, int, 0400);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(disable_power_well,
drm/i915/skl: disable display side power well support for now The display power well support on this platform is in a somewhat broken state atm, so disable it by default. This in effect will get rid of incorrect assert WARNs about the CSR/DMC firmware not being loaded during power well toggling. It also removes a problem during driver loading where a register is accessed while its backing power well is down, resulting in another WARN. Until we come up with the root cause of the second problem and the proper fix for both issues, keep all display side power wells on. Also clarify a bit the option description. Reported-by: Dave Airlie <airlied@redhat.com> Reference: http://mid.gmane.org/CAPM=9tyjBQjSBTKa49cRr6SYkpNW7Pq-fUFznZZ8Y1snvvk7mA@mail.gmail.com Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1446757451-2777-1-git-send-email-imre.deak@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-11-06 05:04:11 +08:00
"Disable display power wells when possible "
"(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)");
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
Revert "drm/i915: skip modeset if compatible for everyone." This reverts commit 6764e9f8724f1231b4deac53b9a82286ac0830e7 Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Thu Aug 27 15:44:06 2015 +0200 drm/i915: skip modeset if compatible for everyone. Bring back the i915.fastboot module parameter, disabled by default, due to backlight regression on Chromebook Pixel 2015. Apparently the firmware of the Chromebook in question enables the panel but disables backlight to avoid a brief garbage scanout upon loading the kernel/module. With fastboot, we leave the backlight untouched, in this case disabled. The user would have to do a modeset (i.e. not just crank up the brightness) to enable the backlight. There is no clean fix readily available, so get back to the drawing board by reverting. [N.B. The reference below is for when the thread was included on public lists, and some of the context had already been dropped by then.] Reported-and-tested-by: Olof Johansson <olof@lixom.net> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> References: http://marc.info/?i=CAKMK7uES7xk05ki92oeX6gmvZWAh9f2vL7yz=6T+fGK9J3X7cQ@mail.gmail.com Fixes: 6764e9f8724f ("drm/i915: skip modeset if compatible for everyone.") Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1447921590-3785-1-git-send-email-jani.nikula@intel.com
2015-11-19 16:26:30 +08:00
module_param_named(fastboot, i915.fastboot, bool, 0600);
MODULE_PARM_DESC(fastboot,
"Try to skip unnecessary mode sets at boot time (default: false)");
drm/i915: Add module param to test the load detect code This is useful for writing igts to make sure we don't break this, without being forced to own a one of these dinosaurs. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-04 01:03:47 +08:00
module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(prefault_disable,
"Disable page prefaulting for pread/pwrite/reloc (default:false). "
"For developers only.");
drm/i915: Add module param to test the load detect code This is useful for writing igts to make sure we don't break this, without being forced to own a one of these dinosaurs. Suggested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-04 01:03:47 +08:00
module_param_named_unsafe(load_detect_test, i915.load_detect_test, bool, 0600);
MODULE_PARM_DESC(load_detect_test,
"Force-enable the VGA load detect code for testing (default:false). "
"For developers only.");
drm/i915: Add a way to test the modeset done during gpu reset, v3. Add force_reset_modeset_test as a parameter to force the modeset path during gpu reset. This allows a IGT test to set the knob and trigger a hang to force the gpu reset, even on platforms that wouldn't otherwise require it. Changes since v1: - Split out fix to separate commit. Changes since v2: - This commit is purely about force_reset_modeset_test now. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Testcase: drv_hangman.reset-with-forced-modeset Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-3-git-send-email-ville.syrjala@linux.intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-08-06 04:28:28 +08:00
module_param_named_unsafe(force_reset_modeset_test, i915.force_reset_modeset_test, bool, 0600);
MODULE_PARM_DESC(force_reset_modeset_test,
"Force a modeset during gpu reset for testing (default:false). "
"For developers only.");
drm/i915: Mark debug mod options as _unsafe We don't want random people to touch these. Especially true since we've just screwed up SKL by holding it way too long under the preliminary flag because of some ABI issues. And now there's howtos all over the internets about how to set this. Same pretty much for anything else. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: drop fastboot changes, that option is gone.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-08 19:56:23 +08:00
module_param_named_unsafe(invert_brightness, i915.invert_brightness, int, 0600);
drm/i915: move module parameters into a struct, in a new file With 20+ module parameters, I think referring to them via a struct improves clarity over just having a bunch of globals. While at it, move the parameter initialization and definitions into a new file i915_params.c to reduce clutter in i915_drv.c. Apart from the ill-named i915_enable_rc6, i915_enable_fbc and i915_enable_ppgtt parameters, for which we lose the "i915_" prefix internally, the module parameters now look the same both on the kernel command line and in code. For example, "i915.modeset". The downsides of the change are losing static on a couple of variables and not having the initialization and module_param_named() right next to each other. On the other hand, all module parameters are now defined in one place at i915_params.c. Plus you can do this to find all module parameter references: $ git grep "i915\." -- drivers/gpu/drm/i915 v2: - move the definitions into a new file - s/i915_params/i915/ - make i915_try_reset i915.reset, for consistency Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-01-21 17:24:25 +08:00
MODULE_PARM_DESC(invert_brightness,
"Invert backlight brightness "
"(-1 force normal, 0 machine defaults, 1 force inversion), please "
"report PCI device ID, subsystem vendor and subsystem device ID "
"to dri-devel@lists.freedesktop.org, if your machine needs it. "
"It will then be included in an upcoming module version.");
drm/i915: Provide a command line option to disable display If we can't actually determine at run-time we have a fused-off display, provide at least an option to disable it. v2: Move the i915.disable_display test in a separate check (Daniel Vetter) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11 01:20:55 +08:00
drm/i915: drop write perm from module params which don't support changing We've given write permissions to dynamically change some module parameters through /sys/module/i915/parameters although they only support setting on module load. Fix the permissions. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455621493-6865-1-git-send-email-jani.nikula@intel.com
2016-02-16 19:18:12 +08:00
module_param_named(disable_display, i915.disable_display, bool, 0400);
drm/i915: Provide a command line option to disable display If we can't actually determine at run-time we have a fused-off display, provide at least an option to disable it. v2: Move the i915.disable_display test in a separate check (Daniel Vetter) Signed-off-by: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-11 01:20:55 +08:00
MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
drm/i915: Implement command buffer parsing logic The command parser scans batch buffers submitted via execbuffer ioctls before the driver submits them to hardware. At a high level, it looks for several things: 1) Commands which are explicitly defined as privileged or which should only be used by the kernel driver. The parser generally rejects such commands, with the provision that it may allow some from the drm master process. 2) Commands which access registers. To support correct/enhanced userspace functionality, particularly certain OpenGL extensions, the parser provides a whitelist of registers which userspace may safely access (for both normal and drm master processes). 3) Commands which access privileged memory (i.e. GGTT, HWS page, etc). The parser always rejects such commands. See the overview comment in the source for more details. This patch only implements the logic. Subsequent patches will build the tables that drive the parser. v2: Don't set the secure bit if the parser succeeds Fail harder during init Makefile cleanup Kerneldoc cleanup Clarify module param description Convert ints to bools in a few places Move client/subclient defs to i915_reg.h Remove the bits_count field OTC-Tracker: AXIA-4631 Change-Id: I50b98c71c6655893291c78a2d1b8954577b37a30 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-19 02:15:46 +08:00
drm/i915: Use the precomputed value for whether to enable command parsing As i915.enable_cmd_parser is an unsafe option, make it read-only at runtime. Now that it is constant, we can use the value determined during initialisation as to whether we need the cmdparser at execbuffer time. v2: Remove the inline for its single user, it is clear enough (and shorter) without! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161124125851.6615-1-chris@chris-wilson.co.uk
2016-11-24 20:58:51 +08:00
module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, bool, 0400);
drm/i915: Implement command buffer parsing logic The command parser scans batch buffers submitted via execbuffer ioctls before the driver submits them to hardware. At a high level, it looks for several things: 1) Commands which are explicitly defined as privileged or which should only be used by the kernel driver. The parser generally rejects such commands, with the provision that it may allow some from the drm master process. 2) Commands which access registers. To support correct/enhanced userspace functionality, particularly certain OpenGL extensions, the parser provides a whitelist of registers which userspace may safely access (for both normal and drm master processes). 3) Commands which access privileged memory (i.e. GGTT, HWS page, etc). The parser always rejects such commands. See the overview comment in the source for more details. This patch only implements the logic. Subsequent patches will build the tables that drive the parser. v2: Don't set the secure bit if the parser succeeds Fail harder during init Makefile cleanup Kerneldoc cleanup Clarify module param description Convert ints to bools in a few places Move client/subclient defs to i915_reg.h Remove the bits_count field OTC-Tracker: AXIA-4631 Change-Id: I50b98c71c6655893291c78a2d1b8954577b37a30 Signed-off-by: Brad Volkin <bradley.d.volkin@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> [danvet: Appease checkpatch.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-19 02:15:46 +08:00
MODULE_PARM_DESC(enable_cmd_parser,
drm/i915: Use the precomputed value for whether to enable command parsing As i915.enable_cmd_parser is an unsafe option, make it read-only at runtime. Now that it is constant, we can use the value determined during initialisation as to whether we need the cmdparser at execbuffer time. v2: Remove the inline for its single user, it is clear enough (and shorter) without! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20161124125851.6615-1-chris@chris-wilson.co.uk
2016-11-24 20:58:51 +08:00
"Enable command parsing (true=enabled [default], false=disabled)");
drm/i915: Replaced Blitter ring based flips with MMIO flips This patch enables the framework for using MMIO based flip calls, in contrast with the CS based flip calls which are being used currently. MMIO based flip calls can be enabled on architectures where Render and Blitter engines reside in different power wells. The decision to use MMIO flips can be made based on workloads to give 100% residency for Media power well. v2: The MMIO flips now use the interrupt driven mechanism for issuing the flips when target seqno is reached. (Incorporating Ville's idea) v3: Rebasing on latest code. Code restructuring after incorporating Damien's comments v4: Addressing Ville's review comments -general cleanup -updating only base addr instead of calling update_primary_plane -extending patch for gen5+ platforms v5: Addressed Ville's review comments -Making mmio flip vs cs flip selection based on module parameter -Adding check for DRIVER_MODESET feature in notify_ring before calling notify mmio flip. -Other changes mostly in function arguments v6: -Having a seperate function to check condition for using mmio flips (Ville) -propogating error code from i915_gem_check_olr (Ville) v7: -Adding __must_check with i915_gem_check_olr (Chris) -Renaming mmio_flip_data to mmio_flip (Chris) -Rebasing on latest nightly v8: -Rebasing on latest code -squash 3rd patch in series(mmio setbase vs page flip race) with this patch -Added new tiling mode update in intel_do_mmio_flip (Chris) v9: -check for obj->last_write_seqno being 0 instead of obj->ring being NULL in intel_postpone_flip, as this is a more restrictive condition (Chris) v10: -Applied Chris's suggestions for squashing patches 2,3 into this patch. These patches make the selection of CS vs MMIO flip at the page flip time, and make the module parameter for using mmio flips as tristate, the states being 'force CS flips', 'force mmio flips', 'driver discretion'. Changed the logic for driver discretion (Chris) v11: Minor code cleanup(better readability, fixing whitespace errors, using lockdep to check mutex locked status in postpone_flip, removal of __must_check in function definition) (Chris) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Sourab Gupta <sourab.gupta@intel.com> Signed-off-by: Akash Goel <akash.goel@intel.com> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # snb, ivb [danvet: Fix up parameter alignement checkpatch spotted.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-06-02 19:17:17 +08:00
drm/i915: Revert async unpin and nonblocking atomic commit This reverts the following patches: d55dbd06bb5e1399aba9ab5227465339d1bbefff drm/i915: Allow nonblocking update of pageflips. 15c86bdb760185e871c7a0f559978328aa500971 drm/i915: Check for unpin correctness. 95c2ccdc82d520f59ae3b6fdc097b63c9b7082bb Reapply "drm/i915: Avoid stalling on pending flips for legacy cursor updates" a6747b7304a9d66758a196d885dab8bbfa5e7d1f drm/i915: Make unpin async. 03f476e1fcb42fca88fc50b94b0d3adbdbe887f0 drm/i915: Prepare connectors for nonblocking checks. 2099deffef4404f949ba1b68d2b17e0608190bc2 drm/i915: Pass atomic states to fbc update functions. ee7171af72c39c18b7d7571419a4ac6ca30aea66 drm/i915: Remove reset_counter from intel_crtc. 2ee004f7c59b2e642f0bb2834f847d756f2dd7b7 drm/i915: Remove queue_flip pointer. b8d2afae557dbb9b9c7bc6f6ec4f5278f3c4c34e drm/i915: Remove use_mmio_flip kernel parameter. 8dd634d922615ec3a9af7976029110ec037f8b50 drm/i915: Remove cs based page flip support. 143f73b3bf48c089b40f58462dd7f7c199fd4f0f drm/i915: Rework intel_crtc_page_flip to be almost atomic, v3. 84fc494b64e8c591be446a966b7447a9db519c88 drm/i915: Add the exclusive fence to plane_state. 6885843ae164e11f6c802209d06921e678a3f3f3 drm/i915: Convert flip_work to a list. aa420ddd8eeaa5df579894a412289e4d07c2fee9 drm/i915: Allow mmio updates on all platforms, v2. afee4d8707ab1f21b7668de995be3a5961e83582 Revert "drm/i915: Avoid stalling on pending flips for legacy cursor updates" "drm/i915: Allow nonblocking update of pageflips" should have been split up, misses a proper commit message and seems to cause issues in the legacy page_flip path as demonstrated by kms_flip. "drm/i915: Make unpin async" doesn't handle the unthrottled cursor updates correctly, leading to an apparent pin count leak. This is caught by the WARN_ON in i915_gem_object_do_pin which screams if we have more than DRM_I915_GEM_OBJECT_MAX_PIN_COUNT pins. Unfortuantely we can't just revert these two because this patch series came with a built-in bisect breakage in the form of temporarily removing the unthrottled cursor update hack for legacy cursor ioctl. Therefore there's no other option than to revert the entire pile :( There's one tiny conflict in intel_drv.h due to other patches, nothing serious. Normally I'd wait a bit longer with doing a maintainer revert, but since the minimal set of patches we need to revert (due to the bisect breakage) is so big, time is running out fast. And very soon (especially after a few attempts at fixing issues) it'll be really hard to revert things cleanly. Lessons learned: - Not a good idea to rush the review (done by someone fairly new to the area) and not make sure domain experts had a chance to read it. - Patches should be properly split up. I only looked at the two patches that should be reverted in detail, but both look like the mix up different things in one patch. - Patches really should have proper commit messages. Especially when doing more than one thing, and especially when touching critical and tricky core code. - Building a patch series and r-b stamping it when it has a built-in bisect breakage is not a good idea. - I also think we need to stop building up technical debt by postponing atomic igt testcases even longer. I think it's clear that there's enough corner cases in this beast that we really need to have the testcases _before_ the next step lands. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Patrik Jakobsson <patrik.jakobsson@linux.intel.com> Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Dave Airlie <airlied@redhat.com> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-05-24 23:13:53 +08:00
module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, 0600);
MODULE_PARM_DESC(use_mmio_flip,
"use MMIO flips (-1=never, 0=driver discretion [default], 1=always)");
drm/i915: Disable the mmio.debug WARN after it fires If we have a single unclaimed register, we will have lots. A WARN for each one makes the machine unusable and does not aid debugging. Convert the i915.mmio_debug option to a counter for how many WARNs to fire before shutting up. Even when i915.mmio_debug was disabled it would continue to shout an *ERROR* for every interrupt, without any information at all for debugging. The massive verbiage was added in commit 5978118c39c2f72fd8b39ef9c086723542384809 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Wed Jul 16 17:49:29 2014 -0300 drm/i915: reorganize the unclaimed register detection code v2: Automatically enable invalid mmio reporting for the *next* invalid access if mmio_debug is disabled by default. This should give us clearer debug information without polluting the logs too much. v3: Compile fixes, rebase. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Update modparam text per the thread.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-18 18:55:50 +08:00
module_param_named(mmio_debug, i915.mmio_debug, int, 0600);
drm/i915: reorganize the unclaimed register detection code The current code only runs when we do an I915_WRITE operation. It checks if the unclaimed register flag is set before we do the operation, and then it checks it again after we do the operation. This double check allows us to find out if the I915_WRITE operation in question is the bad one, or if some previous code is the bad one. When it finds a problem, our code uses DRM_ERROR to signal it. The good thing about the current code is that it detects the problem, so at least we can know we did something wrong. The problem is that even though we find the problem, we don't really have much information to actually debug it. So whenever I see one of these DRM_ERROR messages on my systems, the first thing I do is apply a patch to change the DRM_ERROR to a WARN and also check for unclaimed registers on I915_READ operations. This local patch makes things even slower, but it usually helps a lot in finding the bad code. The first point here is that since the current code is only useful to detect whether we have a problem or not, but it is not really good to find the cause of the problem, I don't think we should be checking both before and after every I915_WRITE operation: just doing the check once should be enough for us to quickly detect problems. With this change, the code that runs by default for every single user will only do 1 read operation for every single I915_WRITE, instead of 2. This patch does this change. The second point is that the local patch I have should be upstream, but since it makes things slower it should be disabled by default. So I added the i915.mmio_debug option to enable it. So after this patch, this is what will happen: - By default, we will try to detect unclaimed registers once after every I915_WRITE operation. Previously we tried twice for every I915_WRITE. - When we find an unclaimed register we will still print a DRM_ERROR message, but we will now tell the user to try again with i915.mmio_debug=1. - When we use i915.mmio_debug=1 we will try to find unclaimed registers both before and after every I915_READ and I915_WRITE operation, and we will print stack traces in case we find them. This should really help locating the exact point of the bad code (or at least finding out that i915.ko is not the problem). This commit also opens space for really-slow register debugging operations on other platforms. In theory we can now add lots and lots of debug code behind i915.mmio_debug, enable this option on our tests, and catch more problems. v2: - Remove not-so-useful comments (Daniel) - Fix the param definition macros (Rodrigo) Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-07-17 04:49:29 +08:00
MODULE_PARM_DESC(mmio_debug,
drm/i915: Disable the mmio.debug WARN after it fires If we have a single unclaimed register, we will have lots. A WARN for each one makes the machine unusable and does not aid debugging. Convert the i915.mmio_debug option to a counter for how many WARNs to fire before shutting up. Even when i915.mmio_debug was disabled it would continue to shout an *ERROR* for every interrupt, without any information at all for debugging. The massive verbiage was added in commit 5978118c39c2f72fd8b39ef9c086723542384809 Author: Paulo Zanoni <paulo.r.zanoni@intel.com> Date: Wed Jul 16 17:49:29 2014 -0300 drm/i915: reorganize the unclaimed register detection code v2: Automatically enable invalid mmio reporting for the *next* invalid access if mmio_debug is disabled by default. This should give us clearer debug information without polluting the logs too much. v3: Compile fixes, rebase. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@gmail.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> [danvet: Update modparam text per the thread.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-18 18:55:50 +08:00
"Enable the MMIO debug code for the first N failures (default: off). "
"This may negatively affect performance.");
drm/i915: tame the chattermouth (v2) Many distro's have mechanism in place to collect and automatically file bugs for failed WARN()s. And since i915 has a lot of hw state sanity checks which result in WARN(), it generates quite a lot of noise which is somewhat disconcerting to the end user. Separate out the internal hw-is-in-the-state-I-expected checks into I915_STATE_WARN()s and allow configuration via i915.verbose_checks module param about whether this will generate a full blown stacktrace or just DRM_ERROR(). The new moduleparam defaults to true, so by default there is no change in behavior. And even when disabled, you will still get an error message logged. v2: paint the macro names blue, clarify that the default behavior remains the same as before Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-16 02:56:32 +08:00
module_param_named(verbose_state_checks, i915.verbose_state_checks, bool, 0600);
MODULE_PARM_DESC(verbose_state_checks,
"Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");
drm/i915: Add i915.nuclear_pageflip command line param to force atomic (v4) We don't have full atomic modeset support yet, but the "nuclear pageflip" subset of functionality (i.e., plane operations only) should be ready. Allow the user to force atomic on for debug purposes, or for fixed-purpose embedded devices that will only use atomic for plane updates. The term 'nuclear' is used here instead of 'atomic' to make it clear that this doesn't allow full atomic modeset support, just a (very useful) subset of the atomic functionality. We'll drop the kernel parameter and unconditionally enable atomic in a future patch once all of the necessary pieces are in. v2: - Use module_param_named_unsafe() (Daniel) - Simplify comment on DRIVER_ATOMIC guard (Daniel) v3: - Make the parameter "nuclear_pageflip" rather than just "nuclear" for clarity. (Ander) v4: - Make the internal variable "nuclear_pageflip" as well as the command-line option. (Ander) Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-01-23 08:53:12 +08:00
drm/i915: Enable atomic support by default on supported platforms. i915 is pretty much feature complete. Support for atomic i915-specific connector properties is still missing; those properties can (for now) only be set through the legacy ioctl. ILK style watermarks and gen9+ watermarks are handled atomically, and nonblocking modesets work. FBC has also been made to work with atomic. gen4x- and vlv/chv watermarks still need to be fixed, so disable atomic by default there for now. Flip the switch!! Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486021302-24910-1-git-send-email-maarten.lankhorst@linux.intel.com [mlankhorst: Fix checkpatch warning about extra space in match_info] Acked-by: Daniel Stone <daniel@fooishbar.org> Reviewed-by: Lyude <lyude@redhat.com>
2017-02-02 15:41:42 +08:00
module_param_named_unsafe(nuclear_pageflip, i915.nuclear_pageflip, bool, 0400);
Partially revert "drm/i915: Use full atomic modeset." This partially reverts commit 74c090b1bdc57b1c9f1361908cca5a3d8a80fb08. The DRIVER_ATOMIC cap cannot yet be exported because i915 lacks async support. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-26 15:29:56 +08:00
MODULE_PARM_DESC(nuclear_pageflip,
drm/i915: Enable atomic support by default on supported platforms. i915 is pretty much feature complete. Support for atomic i915-specific connector properties is still missing; those properties can (for now) only be set through the legacy ioctl. ILK style watermarks and gen9+ watermarks are handled atomically, and nonblocking modesets work. FBC has also been made to work with atomic. gen4x- and vlv/chv watermarks still need to be fixed, so disable atomic by default there for now. Flip the switch!! Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Lyude <cpaul@redhat.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1486021302-24910-1-git-send-email-maarten.lankhorst@linux.intel.com [mlankhorst: Fix checkpatch warning about extra space in match_info] Acked-by: Daniel Stone <daniel@fooishbar.org> Reviewed-by: Lyude <lyude@redhat.com>
2017-02-02 15:41:42 +08:00
"Force enable atomic functionality on platforms that don't have full support yet.");
Partially revert "drm/i915: Use full atomic modeset." This partially reverts commit 74c090b1bdc57b1c9f1361908cca5a3d8a80fb08. The DRIVER_ATOMIC cap cannot yet be exported because i915 lacks async support. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-26 15:29:56 +08:00
drm/i915/skl: Add module parameter to select edp vswing table This provides an option to override the value set by VBT for selecting edp Vswing Pre-emph setting table. v2: Adding comment about this being a temporary workaround and making the parameter read-only (Jani) v3: Changing mode to 0400 instead of 0 (Jani) https://bugs.freedesktop.org/show_bug.cgi?id=89554 Signed-off-by: Sonika Jindal <sonika.jindal@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-05-06 20:05:48 +08:00
/* WA to get away with the default setting in VBT for early platforms.Will be removed */
module_param_named_unsafe(edp_vswing, i915.edp_vswing, int, 0400);
MODULE_PARM_DESC(edp_vswing,
"Ignore/Override vswing pre-emph table selection from VBT "
"(0=use value from vbt [default], 1=low power swing(200mV),"
"2=default swing(400mV))");
drm/i915: Add GuC-related module parameters Two new module parameters: "enable_guc_submission" which will turn on submission of batchbuffers via the GuC (when implemented), and "guc_log_level" which controls the level of debugging logged by the GuC and captured by the host. Signed-off-by: Alex Dai <yu.dai@intel.com> v4: Mark "enable_guc_submission" unsafe [Daniel Vetter] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-10 02:29:03 +08:00
drm/i915/guc: add enable_guc_loading parameter Split the function of "enable_guc_submission" into two separate options. The new one ("enable_guc_loading") controls only the *fetching and loading* of the GuC firmware image. The existing one is redefined to control only the *use* of the GuC for batch submission once the firmware is loaded. In addition, the degree of control has been refined from a simple bool to an integer key, allowing several options: -1 (default) whatever the platform default is 0 DISABLE don't load/use the GuC 1 BEST EFFORT try to load/use the GuC, fallback if not available 2 REQUIRE must load/use the GuC, else leave the GPU wedged The new platform default (as coded here) will be to attempt to load the GuC iff the device has a GuC that requires firmware, but not yet to use it for submission. A later patch will change to enable it if appropriate. v4: Changed some error-message levels, mostly ERROR->INFO, per review comments by Tvrtko Ursulin. v5: Dropped one more error message, disabled GuC submission on hypothetical firmware-free devices [Tvrtko Ursulin]. v6: Logging tidy by Tvrtko Ursulin: * Do not log falling back to execlists when wedging the GPU. * Do not log fw load errors when load was disabled by user. * Pass down some error code from fw load for log message to make more sense. Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v5) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by: Fiedorowicz, Lukasz <lukasz.fiedorowicz@intel.com> Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v5) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Nick Hoath <nicholas.hoath@intel.com> (v6)
2016-05-20 18:42:42 +08:00
module_param_named_unsafe(enable_guc_loading, i915.enable_guc_loading, int, 0400);
MODULE_PARM_DESC(enable_guc_loading,
"Enable GuC firmware loading "
drm/i915/guc: Revert "drm/i915/guc: enable GuC loading & submission by default" This reverts commit 041824ee25cfc535ba2d9a22c217df735ea2471e. We have latency issues that might impact the performance: #96606. and hangs and loading issues on resume after S4: #96526. This is also blocking a platform milestone so let's disable this for now while we make sure we don't have any more loading issue, or related basic hangs and it pass BAT for real in all platofmrs. In case BAT is wrong let's first fix BAT before re-enable it here. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96606 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96526 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Stable <stable@vger.kernel.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Christophe Prigent <christophe.prigent@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468884477-30086-1-git-send-email-rodrigo.vivi@intel.com
2016-07-19 07:27:57 +08:00
"(-1=auto, 0=never [default], 1=if available, 2=required)");
drm/i915/guc: add enable_guc_loading parameter Split the function of "enable_guc_submission" into two separate options. The new one ("enable_guc_loading") controls only the *fetching and loading* of the GuC firmware image. The existing one is redefined to control only the *use* of the GuC for batch submission once the firmware is loaded. In addition, the degree of control has been refined from a simple bool to an integer key, allowing several options: -1 (default) whatever the platform default is 0 DISABLE don't load/use the GuC 1 BEST EFFORT try to load/use the GuC, fallback if not available 2 REQUIRE must load/use the GuC, else leave the GPU wedged The new platform default (as coded here) will be to attempt to load the GuC iff the device has a GuC that requires firmware, but not yet to use it for submission. A later patch will change to enable it if appropriate. v4: Changed some error-message levels, mostly ERROR->INFO, per review comments by Tvrtko Ursulin. v5: Dropped one more error message, disabled GuC submission on hypothetical firmware-free devices [Tvrtko Ursulin]. v6: Logging tidy by Tvrtko Ursulin: * Do not log falling back to execlists when wedging the GPU. * Do not log fw load errors when load was disabled by user. * Pass down some error code from fw load for log message to make more sense. Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v5) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Tested-by: Fiedorowicz, Lukasz <lukasz.fiedorowicz@intel.com> Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> (v5) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Nick Hoath <nicholas.hoath@intel.com> (v6)
2016-05-20 18:42:42 +08:00
module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, int, 0400);
MODULE_PARM_DESC(enable_guc_submission,
"Enable GuC submission "
drm/i915/guc: Revert "drm/i915/guc: enable GuC loading & submission by default" This reverts commit 041824ee25cfc535ba2d9a22c217df735ea2471e. We have latency issues that might impact the performance: #96606. and hangs and loading issues on resume after S4: #96526. This is also blocking a platform milestone so let's disable this for now while we make sure we don't have any more loading issue, or related basic hangs and it pass BAT for real in all platofmrs. In case BAT is wrong let's first fix BAT before re-enable it here. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96606 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96526 Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Dave Gordon <david.s.gordon@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Stable <stable@vger.kernel.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Christophe Prigent <christophe.prigent@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1468884477-30086-1-git-send-email-rodrigo.vivi@intel.com
2016-07-19 07:27:57 +08:00
"(-1=auto, 0=never [default], 1=if available, 2=required)");
drm/i915: Add GuC-related module parameters Two new module parameters: "enable_guc_submission" which will turn on submission of batchbuffers via the GuC (when implemented), and "guc_log_level" which controls the level of debugging logged by the GuC and captured by the host. Signed-off-by: Alex Dai <yu.dai@intel.com> v4: Mark "enable_guc_submission" unsafe [Daniel Vetter] Signed-off-by: Dave Gordon <david.s.gordon@intel.com> Reviewed-by: Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-10 02:29:03 +08:00
module_param_named(guc_log_level, i915.guc_log_level, int, 0400);
MODULE_PARM_DESC(guc_log_level,
"GuC firmware logging level (-1:disabled (default), 0-3:enabled)");
drm/i915: add module param "enable_dp_mst" Adds an (unsafe; auto-kernel-tainting) boolean module parameter to the i915 drm driver: "enable_dp_mst", which is enabled by default. Disabling the parameter forces newly connected DisplayPort sinks to report as not supporting multi-stream transport (MST), thus "forcing" the use of single-stream transport (SST). v2: rename parameter to conform to style v3: add signoff Signed-off-by: Nathan Schulte <nmschulte@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458054845-5837-1-git-send-email-nmschulte@gmail.com
2016-03-15 23:14:05 +08:00
drm/i915/uc: Add params for specifying firmware `guc_firmware_path` and `huc_firmware_path` module parameters are added. Using the parameter disables version checks and loads desired firmware instead of the default one. v2: make params unsafe && notice about disabled fw check (J. Lahtinen) Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Signed-off-by: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2017-03-14 22:28:14 +08:00
module_param_named_unsafe(guc_firmware_path, i915.guc_firmware_path, charp, 0400);
MODULE_PARM_DESC(guc_firmware_path,
"GuC firmware path to use instead of the default one");
module_param_named_unsafe(huc_firmware_path, i915.huc_firmware_path, charp, 0400);
MODULE_PARM_DESC(huc_firmware_path,
"HuC firmware path to use instead of the default one");
drm/i915: add module param "enable_dp_mst" Adds an (unsafe; auto-kernel-tainting) boolean module parameter to the i915 drm driver: "enable_dp_mst", which is enabled by default. Disabling the parameter forces newly connected DisplayPort sinks to report as not supporting multi-stream transport (MST), thus "forcing" the use of single-stream transport (SST). v2: rename parameter to conform to style v3: add signoff Signed-off-by: Nathan Schulte <nmschulte@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1458054845-5837-1-git-send-email-nmschulte@gmail.com
2016-03-15 23:14:05 +08:00
module_param_named_unsafe(enable_dp_mst, i915.enable_dp_mst, bool, 0600);
MODULE_PARM_DESC(enable_dp_mst,
"Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true)");
drm/i915: Add fault injection support Add support for forcing an error at selected places in the driver. As an example add 4 options to fail during driver loading. Requested by Chris. v2: - Add fault point for modeset initialization - Print debug message when injecting an error v3: - Rename inject_fault to inject_load_failure, rename the related macros and helper accordingly (Chris) - Use a counter instead of a mask to identify the failure point (Daniel) - Mark the module option as _unsafe and keep i915_params ordered (Joonas) v4: - Rebase on latest -nightly v5: - Use DRM_INFO instead of DRM_DEBUG_DRIVER, making it clearer in CI reports that a following error message is expected (IRC r-b from Chris on v5) CC: Chris Wilson <chris@chris-wilson.co.uk> CC: Daniel Vetter <daniel.vetter@ffwll.ch> CC: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-03-16 19:39:08 +08:00
module_param_named_unsafe(inject_load_failure, i915.inject_load_failure, uint, 0400);
MODULE_PARM_DESC(inject_load_failure,
"Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
drm/i915: Add Backlight Control using DPCD for eDP connectors (v9) This patch adds support for eDP backlight control using DPCD registers to backlight hooks in intel_panel. It checks for backlight control over AUX channel capability and sets up function pointers to get and set the backlight brightness level if supported. v2: Moved backlight functions from intel_dp.c into a new file intel_dp_aux_backlight.c. Also moved reading of eDP display control registers to intel_dp_get_dpcd v3: Correct some formatting mistakes v4: Updated to use AUX backlight control if PWM control is not possible (Jani) v5: Moved call to initialize backlight registers to dp_aux_setup_backlight v6: Check DP_EDP_BACKLIGHT_PIN_ENABLE_CAP is disabled before setting up AUX backlight control. To fix BLM_PWM_ENABLE igt test warnings on bdw_ultra v7: Add enable_dpcd_backlight module parameter. v8: Rebase onto latest drm-intel-nightly branch v9: Remove changes to intel_dp_dpcd_read_wake Split addition edp_dpcd variable into a separate patch Cc: Bob Paauwe <bob.j.paauwe@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Yetunde Adebisi <yetundex.adebisi@intel.com> [Jani: whitepace changes to appease checkpatch] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1459865452-9138-4-git-send-email-yetundex.adebisi@intel.com
2016-04-05 22:10:52 +08:00
module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, bool, 0600);
MODULE_PARM_DESC(enable_dpcd_backlight,
"Enable support for DPCD backlight control (default:false)");
drm/i915: gvt: Introduce the basic architecture of GVT-g This patch introduces the very basic framework of GVT-g device model, includes basic prototypes, definitions, initialization. v12: - Call intel_gvt_init() in driver early initialization stage. (Chris) v8: - Remove the GVT idr and mutex in intel_gvt_host. (Joonas) v7: - Refine the URL link in Kconfig. (Joonas) - Refine the introduction of GVT-g host support in Kconfig. (Joonas) - Remove the macro GVT_ALIGN(), use round_down() instead. (Joonas) - Make "struct intel_gvt" a data member in struct drm_i915_private.(Joonas) - Remove {alloc, free}_gvt_device() - Rename intel_gvt_{create, destroy}_gvt_device() - Expost intel_gvt_init_host() - Remove the dummy "struct intel_gvt" declaration in intel_gvt.h (Joonas) v6: - Refine introduction in Kconfig. (Chris) - The exposed API functions will take struct intel_gvt * instead of void *. (Chris/Tvrtko) - Remove most memebers of strct intel_gvt_device_info. Will add them in the device model patches.(Chris) - Remove gvt_info() and gvt_err() in debug.h. (Chris) - Move GVT kernel parameter into i915_params. (Chris) - Remove include/drm/i915_gvt.h, as GVT-g will be built within i915. - Remove the redundant struct i915_gvt *, as the functions in i915 will directly take struct intel_gvt *. - Add more comments for reviewer. v5: Take Tvrtko's comments: - Fix the misspelled words in Kconfig - Let functions take drm_i915_private * instead of struct drm_device * - Remove redundant prints/local varible initialization v3: Take Joonas' comments: - Change file name i915_gvt.* to intel_gvt.* - Move GVT kernel parameter into intel_gvt.c - Remove redundant debug macros - Change error handling style - Add introductions for some stub functions - Introduce drm/i915_gvt.h. Take Kevin's comments: - Move GVT-g host/guest check into intel_vgt_balloon in i915_gem_gtt.c v2: - Introduce i915_gvt.c. It's necessary to introduce the stubs between i915 driver and GVT-g host, as GVT-g components is configurable in kernel config. When disabled, the stubs here do nothing. Take Joonas' comments: - Replace boolean return value with int. - Replace customized info/warn/debug macros with DRM macros. - Document all non-static functions like i915. - Remove empty and unused functions. - Replace magic number with marcos. - Set GVT-g in kernel config to "n" by default. Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-5-git-send-email-zhi.a.wang@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-06-16 20:07:00 +08:00
drm/i915: Set the access right of kernel param "i915.enable_gvt" to read-only. The access right of kernel param "i915.enable_gvt" should be read-only as it only applies during module load (and is not *runtime* writable). Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1466425022-3709-1-git-send-email-zhi.a.wang@intel.com
2016-06-20 20:17:02 +08:00
module_param_named(enable_gvt, i915.enable_gvt, bool, 0400);
drm/i915: gvt: Introduce the basic architecture of GVT-g This patch introduces the very basic framework of GVT-g device model, includes basic prototypes, definitions, initialization. v12: - Call intel_gvt_init() in driver early initialization stage. (Chris) v8: - Remove the GVT idr and mutex in intel_gvt_host. (Joonas) v7: - Refine the URL link in Kconfig. (Joonas) - Refine the introduction of GVT-g host support in Kconfig. (Joonas) - Remove the macro GVT_ALIGN(), use round_down() instead. (Joonas) - Make "struct intel_gvt" a data member in struct drm_i915_private.(Joonas) - Remove {alloc, free}_gvt_device() - Rename intel_gvt_{create, destroy}_gvt_device() - Expost intel_gvt_init_host() - Remove the dummy "struct intel_gvt" declaration in intel_gvt.h (Joonas) v6: - Refine introduction in Kconfig. (Chris) - The exposed API functions will take struct intel_gvt * instead of void *. (Chris/Tvrtko) - Remove most memebers of strct intel_gvt_device_info. Will add them in the device model patches.(Chris) - Remove gvt_info() and gvt_err() in debug.h. (Chris) - Move GVT kernel parameter into i915_params. (Chris) - Remove include/drm/i915_gvt.h, as GVT-g will be built within i915. - Remove the redundant struct i915_gvt *, as the functions in i915 will directly take struct intel_gvt *. - Add more comments for reviewer. v5: Take Tvrtko's comments: - Fix the misspelled words in Kconfig - Let functions take drm_i915_private * instead of struct drm_device * - Remove redundant prints/local varible initialization v3: Take Joonas' comments: - Change file name i915_gvt.* to intel_gvt.* - Move GVT kernel parameter into intel_gvt.c - Remove redundant debug macros - Change error handling style - Add introductions for some stub functions - Introduce drm/i915_gvt.h. Take Kevin's comments: - Move GVT-g host/guest check into intel_vgt_balloon in i915_gem_gtt.c v2: - Introduce i915_gvt.c. It's necessary to introduce the stubs between i915 driver and GVT-g host, as GVT-g components is configurable in kernel config. When disabled, the stubs here do nothing. Take Joonas' comments: - Replace boolean return value with int. - Replace customized info/warn/debug macros with DRM macros. - Document all non-static functions like i915. - Remove empty and unused functions. - Replace magic number with marcos. - Set GVT-g in kernel config to "n" by default. Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1466078825-6662-5-git-send-email-zhi.a.wang@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-06-16 20:07:00 +08:00
MODULE_PARM_DESC(enable_gvt,
"Enable support for Intel GVT-g graphics virtualization host support(default:false)");