OpenCloudOS-Kernel/kernel/trace/trace_events_hist.c

2536 lines
58 KiB
C
Raw Normal View History

tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
/*
* trace_events_hist - trace event hist triggers
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright (C) 2015 Tom Zanussi <tom.zanussi@linux.intel.com>
*/
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/mutex.h>
#include <linux/slab.h>
#include <linux/stacktrace.h>
#include <linux/rculist.h>
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
#include "tracing_map.h"
#include "trace.h"
struct hist_field;
typedef u64 (*hist_field_fn_t) (struct hist_field *field, void *event,
struct ring_buffer_event *rbe);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
#define HIST_FIELD_OPERANDS_MAX 2
#define HIST_FIELDS_MAX (TRACING_MAP_FIELDS_MAX + TRACING_MAP_VARS_MAX)
enum field_op_id {
FIELD_OP_NONE,
FIELD_OP_PLUS,
FIELD_OP_MINUS,
FIELD_OP_UNARY_MINUS,
};
struct hist_var {
char *name;
struct hist_trigger_data *hist_data;
unsigned int idx;
};
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
struct hist_field {
struct ftrace_event_field *field;
unsigned long flags;
hist_field_fn_t fn;
unsigned int size;
unsigned int offset;
unsigned int is_signed;
struct hist_field *operands[HIST_FIELD_OPERANDS_MAX];
struct hist_trigger_data *hist_data;
struct hist_var var;
enum field_op_id operator;
char *name;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
};
static u64 hist_field_none(struct hist_field *field, void *event,
struct ring_buffer_event *rbe)
{
return 0;
}
static u64 hist_field_counter(struct hist_field *field, void *event,
struct ring_buffer_event *rbe)
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
{
return 1;
}
static u64 hist_field_string(struct hist_field *hist_field, void *event,
struct ring_buffer_event *rbe)
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
{
char *addr = (char *)(event + hist_field->field->offset);
return (u64)(unsigned long)addr;
}
static u64 hist_field_dynstring(struct hist_field *hist_field, void *event,
struct ring_buffer_event *rbe)
{
u32 str_item = *(u32 *)(event + hist_field->field->offset);
int str_loc = str_item & 0xffff;
char *addr = (char *)(event + str_loc);
return (u64)(unsigned long)addr;
}
static u64 hist_field_pstring(struct hist_field *hist_field, void *event,
struct ring_buffer_event *rbe)
{
char **addr = (char **)(event + hist_field->field->offset);
return (u64)(unsigned long)*addr;
}
static u64 hist_field_log2(struct hist_field *hist_field, void *event,
struct ring_buffer_event *rbe)
tracing: Add hist trigger 'log2' modifier Allow users to have numeric fields displayed as log2 values in case value range is very wide by appending '.log2' to field names. For example, # echo 'hist:key=bytes_req' > kmalloc/trigger # cat kmalloc/hist { bytes_req: 504 } hitcount: 1 { bytes_req: 11 } hitcount: 1 { bytes_req: 104 } hitcount: 1 { bytes_req: 48 } hitcount: 1 { bytes_req: 2048 } hitcount: 1 { bytes_req: 4096 } hitcount: 1 { bytes_req: 240 } hitcount: 1 { bytes_req: 392 } hitcount: 1 { bytes_req: 13 } hitcount: 1 { bytes_req: 28 } hitcount: 1 { bytes_req: 12 } hitcount: 1 { bytes_req: 64 } hitcount: 2 { bytes_req: 128 } hitcount: 2 { bytes_req: 32 } hitcount: 2 { bytes_req: 8 } hitcount: 11 { bytes_req: 10 } hitcount: 13 { bytes_req: 24 } hitcount: 25 { bytes_req: 160 } hitcount: 29 { bytes_req: 16 } hitcount: 33 { bytes_req: 80 } hitcount: 36 When using '.log2' modifier, the output looks like: # echo 'hist:key=bytes_req.log2' > kmalloc/trigger # cat kmalloc/hist { bytes_req: ~ 2^12 } hitcount: 1 { bytes_req: ~ 2^11 } hitcount: 1 { bytes_req: ~ 2^9 } hitcount: 2 { bytes_req: ~ 2^6 } hitcount: 3 { bytes_req: ~ 2^3 } hitcount: 13 { bytes_req: ~ 2^5 } hitcount: 19 { bytes_req: ~ 2^8 } hitcount: 49 { bytes_req: ~ 2^7 } hitcount: 57 { bytes_req: ~ 2^4 } hitcount: 74 Link: http://lkml.kernel.org/r/7ff396b246c6a881f46b979735fddf05a0d6c71a.1457029949.git.tom.zanussi@linux.intel.com Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:55:02 +08:00
{
struct hist_field *operand = hist_field->operands[0];
u64 val = operand->fn(operand, event, rbe);
tracing: Add hist trigger 'log2' modifier Allow users to have numeric fields displayed as log2 values in case value range is very wide by appending '.log2' to field names. For example, # echo 'hist:key=bytes_req' > kmalloc/trigger # cat kmalloc/hist { bytes_req: 504 } hitcount: 1 { bytes_req: 11 } hitcount: 1 { bytes_req: 104 } hitcount: 1 { bytes_req: 48 } hitcount: 1 { bytes_req: 2048 } hitcount: 1 { bytes_req: 4096 } hitcount: 1 { bytes_req: 240 } hitcount: 1 { bytes_req: 392 } hitcount: 1 { bytes_req: 13 } hitcount: 1 { bytes_req: 28 } hitcount: 1 { bytes_req: 12 } hitcount: 1 { bytes_req: 64 } hitcount: 2 { bytes_req: 128 } hitcount: 2 { bytes_req: 32 } hitcount: 2 { bytes_req: 8 } hitcount: 11 { bytes_req: 10 } hitcount: 13 { bytes_req: 24 } hitcount: 25 { bytes_req: 160 } hitcount: 29 { bytes_req: 16 } hitcount: 33 { bytes_req: 80 } hitcount: 36 When using '.log2' modifier, the output looks like: # echo 'hist:key=bytes_req.log2' > kmalloc/trigger # cat kmalloc/hist { bytes_req: ~ 2^12 } hitcount: 1 { bytes_req: ~ 2^11 } hitcount: 1 { bytes_req: ~ 2^9 } hitcount: 2 { bytes_req: ~ 2^6 } hitcount: 3 { bytes_req: ~ 2^3 } hitcount: 13 { bytes_req: ~ 2^5 } hitcount: 19 { bytes_req: ~ 2^8 } hitcount: 49 { bytes_req: ~ 2^7 } hitcount: 57 { bytes_req: ~ 2^4 } hitcount: 74 Link: http://lkml.kernel.org/r/7ff396b246c6a881f46b979735fddf05a0d6c71a.1457029949.git.tom.zanussi@linux.intel.com Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:55:02 +08:00
return (u64) ilog2(roundup_pow_of_two(val));
}
static u64 hist_field_plus(struct hist_field *hist_field, void *event,
struct ring_buffer_event *rbe)
{
struct hist_field *operand1 = hist_field->operands[0];
struct hist_field *operand2 = hist_field->operands[1];
u64 val1 = operand1->fn(operand1, event, rbe);
u64 val2 = operand2->fn(operand2, event, rbe);
return val1 + val2;
}
static u64 hist_field_minus(struct hist_field *hist_field, void *event,
struct ring_buffer_event *rbe)
{
struct hist_field *operand1 = hist_field->operands[0];
struct hist_field *operand2 = hist_field->operands[1];
u64 val1 = operand1->fn(operand1, event, rbe);
u64 val2 = operand2->fn(operand2, event, rbe);
return val1 - val2;
}
static u64 hist_field_unary_minus(struct hist_field *hist_field, void *event,
struct ring_buffer_event *rbe)
{
struct hist_field *operand = hist_field->operands[0];
s64 sval = (s64)operand->fn(operand, event, rbe);
u64 val = (u64)-sval;
return val;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
#define DEFINE_HIST_FIELD_FN(type) \
static u64 hist_field_##type(struct hist_field *hist_field, \
void *event, \
struct ring_buffer_event *rbe) \
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
{ \
type *addr = (type *)(event + hist_field->field->offset); \
\
return (u64)(unsigned long)*addr; \
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
DEFINE_HIST_FIELD_FN(s64);
DEFINE_HIST_FIELD_FN(u64);
DEFINE_HIST_FIELD_FN(s32);
DEFINE_HIST_FIELD_FN(u32);
DEFINE_HIST_FIELD_FN(s16);
DEFINE_HIST_FIELD_FN(u16);
DEFINE_HIST_FIELD_FN(s8);
DEFINE_HIST_FIELD_FN(u8);
#define for_each_hist_field(i, hist_data) \
for ((i) = 0; (i) < (hist_data)->n_fields; (i)++)
#define for_each_hist_val_field(i, hist_data) \
for ((i) = 0; (i) < (hist_data)->n_vals; (i)++)
#define for_each_hist_key_field(i, hist_data) \
for ((i) = (hist_data)->n_vals; (i) < (hist_data)->n_fields; (i)++)
#define HIST_STACKTRACE_DEPTH 16
#define HIST_STACKTRACE_SIZE (HIST_STACKTRACE_DEPTH * sizeof(unsigned long))
#define HIST_STACKTRACE_SKIP 5
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
#define HITCOUNT_IDX 0
#define HIST_KEY_SIZE_MAX (MAX_FILTER_STR_VAL + HIST_STACKTRACE_SIZE)
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
enum hist_field_flags {
HIST_FIELD_FL_HITCOUNT = 1 << 0,
HIST_FIELD_FL_KEY = 1 << 1,
HIST_FIELD_FL_STRING = 1 << 2,
HIST_FIELD_FL_HEX = 1 << 3,
HIST_FIELD_FL_SYM = 1 << 4,
HIST_FIELD_FL_SYM_OFFSET = 1 << 5,
HIST_FIELD_FL_EXECNAME = 1 << 6,
HIST_FIELD_FL_SYSCALL = 1 << 7,
HIST_FIELD_FL_STACKTRACE = 1 << 8,
HIST_FIELD_FL_LOG2 = 1 << 9,
HIST_FIELD_FL_TIMESTAMP = 1 << 10,
HIST_FIELD_FL_TIMESTAMP_USECS = 1 << 11,
HIST_FIELD_FL_VAR = 1 << 12,
HIST_FIELD_FL_EXPR = 1 << 13,
};
struct var_defs {
unsigned int n_vars;
char *name[TRACING_MAP_VARS_MAX];
char *expr[TRACING_MAP_VARS_MAX];
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
};
struct hist_trigger_attrs {
char *keys_str;
char *vals_str;
char *sort_key_str;
char *name;
bool pause;
bool cont;
bool clear;
bool ts_in_usecs;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
unsigned int map_bits;
char *assignment_str[TRACING_MAP_VARS_MAX];
unsigned int n_assignments;
struct var_defs var_defs;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
};
struct hist_trigger_data {
struct hist_field *fields[HIST_FIELDS_MAX];
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
unsigned int n_vals;
unsigned int n_keys;
unsigned int n_fields;
unsigned int n_vars;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
unsigned int key_size;
struct tracing_map_sort_key sort_keys[TRACING_MAP_SORT_KEYS_MAX];
unsigned int n_sort_keys;
struct trace_event_file *event_file;
struct hist_trigger_attrs *attrs;
struct tracing_map *map;
bool enable_timestamps;
bool remove;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
};
static u64 hist_field_timestamp(struct hist_field *hist_field, void *event,
struct ring_buffer_event *rbe)
{
struct hist_trigger_data *hist_data = hist_field->hist_data;
struct trace_array *tr = hist_data->event_file->tr;
u64 ts = ring_buffer_event_time_stamp(rbe);
if (hist_data->attrs->ts_in_usecs && trace_clock_in_ns(tr))
ts = ns2usecs(ts);
return ts;
}
static struct hist_field *find_var_field(struct hist_trigger_data *hist_data,
const char *var_name)
{
struct hist_field *hist_field, *found = NULL;
int i;
for_each_hist_field(i, hist_data) {
hist_field = hist_data->fields[i];
if (hist_field && hist_field->flags & HIST_FIELD_FL_VAR &&
strcmp(hist_field->var.name, var_name) == 0) {
found = hist_field;
break;
}
}
return found;
}
static struct hist_field *find_var(struct hist_trigger_data *hist_data,
struct trace_event_file *file,
const char *var_name)
{
struct hist_trigger_data *test_data;
struct event_trigger_data *test;
struct hist_field *hist_field;
hist_field = find_var_field(hist_data, var_name);
if (hist_field)
return hist_field;
list_for_each_entry_rcu(test, &file->triggers, list) {
if (test->cmd_ops->trigger_type == ETT_EVENT_HIST) {
test_data = test->private_data;
hist_field = find_var_field(test_data, var_name);
if (hist_field)
return hist_field;
}
}
return NULL;
}
static const char *hist_field_name(struct hist_field *field,
unsigned int level)
{
const char *field_name = "";
if (level > 1)
return field_name;
if (field->field)
field_name = field->field->name;
else if (field->flags & HIST_FIELD_FL_LOG2)
field_name = hist_field_name(field->operands[0], ++level);
else if (field->flags & HIST_FIELD_FL_TIMESTAMP)
field_name = "common_timestamp";
else if (field->flags & HIST_FIELD_FL_EXPR)
field_name = field->name;
if (field_name == NULL)
field_name = "";
return field_name;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static hist_field_fn_t select_value_fn(int field_size, int field_is_signed)
{
hist_field_fn_t fn = NULL;
switch (field_size) {
case 8:
if (field_is_signed)
fn = hist_field_s64;
else
fn = hist_field_u64;
break;
case 4:
if (field_is_signed)
fn = hist_field_s32;
else
fn = hist_field_u32;
break;
case 2:
if (field_is_signed)
fn = hist_field_s16;
else
fn = hist_field_u16;
break;
case 1:
if (field_is_signed)
fn = hist_field_s8;
else
fn = hist_field_u8;
break;
}
return fn;
}
static int parse_map_size(char *str)
{
unsigned long size, map_bits;
int ret;
strsep(&str, "=");
if (!str) {
ret = -EINVAL;
goto out;
}
ret = kstrtoul(str, 0, &size);
if (ret)
goto out;
map_bits = ilog2(roundup_pow_of_two(size));
if (map_bits < TRACING_MAP_BITS_MIN ||
map_bits > TRACING_MAP_BITS_MAX)
ret = -EINVAL;
else
ret = map_bits;
out:
return ret;
}
static void destroy_hist_trigger_attrs(struct hist_trigger_attrs *attrs)
{
unsigned int i;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (!attrs)
return;
for (i = 0; i < attrs->n_assignments; i++)
kfree(attrs->assignment_str[i]);
kfree(attrs->name);
kfree(attrs->sort_key_str);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
kfree(attrs->keys_str);
kfree(attrs->vals_str);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
kfree(attrs);
}
static int parse_assignment(char *str, struct hist_trigger_attrs *attrs)
{
int ret = 0;
if ((strncmp(str, "key=", strlen("key=")) == 0) ||
(strncmp(str, "keys=", strlen("keys=")) == 0)) {
attrs->keys_str = kstrdup(str, GFP_KERNEL);
if (!attrs->keys_str) {
ret = -ENOMEM;
goto out;
}
} else if ((strncmp(str, "val=", strlen("val=")) == 0) ||
(strncmp(str, "vals=", strlen("vals=")) == 0) ||
(strncmp(str, "values=", strlen("values=")) == 0)) {
attrs->vals_str = kstrdup(str, GFP_KERNEL);
if (!attrs->vals_str) {
ret = -ENOMEM;
goto out;
}
} else if (strncmp(str, "sort=", strlen("sort=")) == 0) {
attrs->sort_key_str = kstrdup(str, GFP_KERNEL);
if (!attrs->sort_key_str) {
ret = -ENOMEM;
goto out;
}
} else if (strncmp(str, "name=", strlen("name=")) == 0) {
attrs->name = kstrdup(str, GFP_KERNEL);
if (!attrs->name) {
ret = -ENOMEM;
goto out;
}
} else if (strncmp(str, "size=", strlen("size=")) == 0) {
int map_bits = parse_map_size(str);
if (map_bits < 0) {
ret = map_bits;
goto out;
}
attrs->map_bits = map_bits;
} else {
char *assignment;
if (attrs->n_assignments == TRACING_MAP_VARS_MAX) {
ret = -EINVAL;
goto out;
}
assignment = kstrdup(str, GFP_KERNEL);
if (!assignment) {
ret = -ENOMEM;
goto out;
}
attrs->assignment_str[attrs->n_assignments++] = assignment;
}
out:
return ret;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static struct hist_trigger_attrs *parse_hist_trigger_attrs(char *trigger_str)
{
struct hist_trigger_attrs *attrs;
int ret = 0;
attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
if (!attrs)
return ERR_PTR(-ENOMEM);
while (trigger_str) {
char *str = strsep(&trigger_str, ":");
if (strchr(str, '=')) {
ret = parse_assignment(str, attrs);
if (ret)
goto free;
} else if (strcmp(str, "pause") == 0)
attrs->pause = true;
else if ((strcmp(str, "cont") == 0) ||
(strcmp(str, "continue") == 0))
attrs->cont = true;
else if (strcmp(str, "clear") == 0)
attrs->clear = true;
else {
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
ret = -EINVAL;
goto free;
}
}
if (!attrs->keys_str) {
ret = -EINVAL;
goto free;
}
return attrs;
free:
destroy_hist_trigger_attrs(attrs);
return ERR_PTR(ret);
}
static inline void save_comm(char *comm, struct task_struct *task)
{
if (!task->pid) {
strcpy(comm, "<idle>");
return;
}
if (WARN_ON_ONCE(task->pid < 0)) {
strcpy(comm, "<XXX>");
return;
}
memcpy(comm, task->comm, TASK_COMM_LEN);
}
static void hist_trigger_elt_comm_free(struct tracing_map_elt *elt)
{
kfree((char *)elt->private_data);
}
static int hist_trigger_elt_comm_alloc(struct tracing_map_elt *elt)
{
struct hist_trigger_data *hist_data = elt->map->private_data;
struct hist_field *key_field;
unsigned int i;
for_each_hist_key_field(i, hist_data) {
key_field = hist_data->fields[i];
if (key_field->flags & HIST_FIELD_FL_EXECNAME) {
unsigned int size = TASK_COMM_LEN + 1;
elt->private_data = kzalloc(size, GFP_KERNEL);
if (!elt->private_data)
return -ENOMEM;
break;
}
}
return 0;
}
static void hist_trigger_elt_comm_init(struct tracing_map_elt *elt)
{
char *comm = elt->private_data;
if (comm)
save_comm(comm, current);
}
static const struct tracing_map_ops hist_trigger_elt_comm_ops = {
.elt_alloc = hist_trigger_elt_comm_alloc,
.elt_free = hist_trigger_elt_comm_free,
.elt_init = hist_trigger_elt_comm_init,
};
static const char *get_hist_field_flags(struct hist_field *hist_field)
{
const char *flags_str = NULL;
if (hist_field->flags & HIST_FIELD_FL_HEX)
flags_str = "hex";
else if (hist_field->flags & HIST_FIELD_FL_SYM)
flags_str = "sym";
else if (hist_field->flags & HIST_FIELD_FL_SYM_OFFSET)
flags_str = "sym-offset";
else if (hist_field->flags & HIST_FIELD_FL_EXECNAME)
flags_str = "execname";
else if (hist_field->flags & HIST_FIELD_FL_SYSCALL)
flags_str = "syscall";
else if (hist_field->flags & HIST_FIELD_FL_LOG2)
flags_str = "log2";
else if (hist_field->flags & HIST_FIELD_FL_TIMESTAMP_USECS)
flags_str = "usecs";
return flags_str;
}
static void expr_field_str(struct hist_field *field, char *expr)
{
strcat(expr, hist_field_name(field, 0));
if (field->flags) {
const char *flags_str = get_hist_field_flags(field);
if (flags_str) {
strcat(expr, ".");
strcat(expr, flags_str);
}
}
}
static char *expr_str(struct hist_field *field, unsigned int level)
{
char *expr;
if (level > 1)
return NULL;
expr = kzalloc(MAX_FILTER_STR_VAL, GFP_KERNEL);
if (!expr)
return NULL;
if (!field->operands[0]) {
expr_field_str(field, expr);
return expr;
}
if (field->operator == FIELD_OP_UNARY_MINUS) {
char *subexpr;
strcat(expr, "-(");
subexpr = expr_str(field->operands[0], ++level);
if (!subexpr) {
kfree(expr);
return NULL;
}
strcat(expr, subexpr);
strcat(expr, ")");
kfree(subexpr);
return expr;
}
expr_field_str(field->operands[0], expr);
switch (field->operator) {
case FIELD_OP_MINUS:
strcat(expr, "-");
break;
case FIELD_OP_PLUS:
strcat(expr, "+");
break;
default:
kfree(expr);
return NULL;
}
expr_field_str(field->operands[1], expr);
return expr;
}
static int contains_operator(char *str)
{
enum field_op_id field_op = FIELD_OP_NONE;
char *op;
op = strpbrk(str, "+-");
if (!op)
return FIELD_OP_NONE;
switch (*op) {
case '-':
if (*str == '-')
field_op = FIELD_OP_UNARY_MINUS;
else
field_op = FIELD_OP_MINUS;
break;
case '+':
field_op = FIELD_OP_PLUS;
break;
default:
break;
}
return field_op;
}
static void destroy_hist_field(struct hist_field *hist_field,
unsigned int level)
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
{
unsigned int i;
if (level > 3)
return;
if (!hist_field)
return;
for (i = 0; i < HIST_FIELD_OPERANDS_MAX; i++)
destroy_hist_field(hist_field->operands[i], level + 1);
kfree(hist_field->var.name);
kfree(hist_field->name);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
kfree(hist_field);
}
static struct hist_field *create_hist_field(struct hist_trigger_data *hist_data,
struct ftrace_event_field *field,
unsigned long flags,
char *var_name)
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
{
struct hist_field *hist_field;
if (field && is_function_field(field))
return NULL;
hist_field = kzalloc(sizeof(struct hist_field), GFP_KERNEL);
if (!hist_field)
return NULL;
hist_field->hist_data = hist_data;
if (flags & HIST_FIELD_FL_EXPR)
goto out; /* caller will populate */
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (flags & HIST_FIELD_FL_HITCOUNT) {
hist_field->fn = hist_field_counter;
goto out;
}
if (flags & HIST_FIELD_FL_STACKTRACE) {
hist_field->fn = hist_field_none;
goto out;
}
tracing: Add hist trigger 'log2' modifier Allow users to have numeric fields displayed as log2 values in case value range is very wide by appending '.log2' to field names. For example, # echo 'hist:key=bytes_req' > kmalloc/trigger # cat kmalloc/hist { bytes_req: 504 } hitcount: 1 { bytes_req: 11 } hitcount: 1 { bytes_req: 104 } hitcount: 1 { bytes_req: 48 } hitcount: 1 { bytes_req: 2048 } hitcount: 1 { bytes_req: 4096 } hitcount: 1 { bytes_req: 240 } hitcount: 1 { bytes_req: 392 } hitcount: 1 { bytes_req: 13 } hitcount: 1 { bytes_req: 28 } hitcount: 1 { bytes_req: 12 } hitcount: 1 { bytes_req: 64 } hitcount: 2 { bytes_req: 128 } hitcount: 2 { bytes_req: 32 } hitcount: 2 { bytes_req: 8 } hitcount: 11 { bytes_req: 10 } hitcount: 13 { bytes_req: 24 } hitcount: 25 { bytes_req: 160 } hitcount: 29 { bytes_req: 16 } hitcount: 33 { bytes_req: 80 } hitcount: 36 When using '.log2' modifier, the output looks like: # echo 'hist:key=bytes_req.log2' > kmalloc/trigger # cat kmalloc/hist { bytes_req: ~ 2^12 } hitcount: 1 { bytes_req: ~ 2^11 } hitcount: 1 { bytes_req: ~ 2^9 } hitcount: 2 { bytes_req: ~ 2^6 } hitcount: 3 { bytes_req: ~ 2^3 } hitcount: 13 { bytes_req: ~ 2^5 } hitcount: 19 { bytes_req: ~ 2^8 } hitcount: 49 { bytes_req: ~ 2^7 } hitcount: 57 { bytes_req: ~ 2^4 } hitcount: 74 Link: http://lkml.kernel.org/r/7ff396b246c6a881f46b979735fddf05a0d6c71a.1457029949.git.tom.zanussi@linux.intel.com Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:55:02 +08:00
if (flags & HIST_FIELD_FL_LOG2) {
unsigned long fl = flags & ~HIST_FIELD_FL_LOG2;
tracing: Add hist trigger 'log2' modifier Allow users to have numeric fields displayed as log2 values in case value range is very wide by appending '.log2' to field names. For example, # echo 'hist:key=bytes_req' > kmalloc/trigger # cat kmalloc/hist { bytes_req: 504 } hitcount: 1 { bytes_req: 11 } hitcount: 1 { bytes_req: 104 } hitcount: 1 { bytes_req: 48 } hitcount: 1 { bytes_req: 2048 } hitcount: 1 { bytes_req: 4096 } hitcount: 1 { bytes_req: 240 } hitcount: 1 { bytes_req: 392 } hitcount: 1 { bytes_req: 13 } hitcount: 1 { bytes_req: 28 } hitcount: 1 { bytes_req: 12 } hitcount: 1 { bytes_req: 64 } hitcount: 2 { bytes_req: 128 } hitcount: 2 { bytes_req: 32 } hitcount: 2 { bytes_req: 8 } hitcount: 11 { bytes_req: 10 } hitcount: 13 { bytes_req: 24 } hitcount: 25 { bytes_req: 160 } hitcount: 29 { bytes_req: 16 } hitcount: 33 { bytes_req: 80 } hitcount: 36 When using '.log2' modifier, the output looks like: # echo 'hist:key=bytes_req.log2' > kmalloc/trigger # cat kmalloc/hist { bytes_req: ~ 2^12 } hitcount: 1 { bytes_req: ~ 2^11 } hitcount: 1 { bytes_req: ~ 2^9 } hitcount: 2 { bytes_req: ~ 2^6 } hitcount: 3 { bytes_req: ~ 2^3 } hitcount: 13 { bytes_req: ~ 2^5 } hitcount: 19 { bytes_req: ~ 2^8 } hitcount: 49 { bytes_req: ~ 2^7 } hitcount: 57 { bytes_req: ~ 2^4 } hitcount: 74 Link: http://lkml.kernel.org/r/7ff396b246c6a881f46b979735fddf05a0d6c71a.1457029949.git.tom.zanussi@linux.intel.com Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:55:02 +08:00
hist_field->fn = hist_field_log2;
hist_field->operands[0] = create_hist_field(hist_data, field, fl, NULL);
hist_field->size = hist_field->operands[0]->size;
tracing: Add hist trigger 'log2' modifier Allow users to have numeric fields displayed as log2 values in case value range is very wide by appending '.log2' to field names. For example, # echo 'hist:key=bytes_req' > kmalloc/trigger # cat kmalloc/hist { bytes_req: 504 } hitcount: 1 { bytes_req: 11 } hitcount: 1 { bytes_req: 104 } hitcount: 1 { bytes_req: 48 } hitcount: 1 { bytes_req: 2048 } hitcount: 1 { bytes_req: 4096 } hitcount: 1 { bytes_req: 240 } hitcount: 1 { bytes_req: 392 } hitcount: 1 { bytes_req: 13 } hitcount: 1 { bytes_req: 28 } hitcount: 1 { bytes_req: 12 } hitcount: 1 { bytes_req: 64 } hitcount: 2 { bytes_req: 128 } hitcount: 2 { bytes_req: 32 } hitcount: 2 { bytes_req: 8 } hitcount: 11 { bytes_req: 10 } hitcount: 13 { bytes_req: 24 } hitcount: 25 { bytes_req: 160 } hitcount: 29 { bytes_req: 16 } hitcount: 33 { bytes_req: 80 } hitcount: 36 When using '.log2' modifier, the output looks like: # echo 'hist:key=bytes_req.log2' > kmalloc/trigger # cat kmalloc/hist { bytes_req: ~ 2^12 } hitcount: 1 { bytes_req: ~ 2^11 } hitcount: 1 { bytes_req: ~ 2^9 } hitcount: 2 { bytes_req: ~ 2^6 } hitcount: 3 { bytes_req: ~ 2^3 } hitcount: 13 { bytes_req: ~ 2^5 } hitcount: 19 { bytes_req: ~ 2^8 } hitcount: 49 { bytes_req: ~ 2^7 } hitcount: 57 { bytes_req: ~ 2^4 } hitcount: 74 Link: http://lkml.kernel.org/r/7ff396b246c6a881f46b979735fddf05a0d6c71a.1457029949.git.tom.zanussi@linux.intel.com Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:55:02 +08:00
goto out;
}
if (flags & HIST_FIELD_FL_TIMESTAMP) {
hist_field->fn = hist_field_timestamp;
hist_field->size = sizeof(u64);
goto out;
}
if (WARN_ON_ONCE(!field))
goto out;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (is_string_field(field)) {
flags |= HIST_FIELD_FL_STRING;
if (field->filter_type == FILTER_STATIC_STRING)
hist_field->fn = hist_field_string;
else if (field->filter_type == FILTER_DYN_STRING)
hist_field->fn = hist_field_dynstring;
else
hist_field->fn = hist_field_pstring;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
} else {
hist_field->fn = select_value_fn(field->size,
field->is_signed);
if (!hist_field->fn) {
destroy_hist_field(hist_field, 0);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
return NULL;
}
}
out:
hist_field->field = field;
hist_field->flags = flags;
if (var_name) {
hist_field->var.name = kstrdup(var_name, GFP_KERNEL);
if (!hist_field->var.name)
goto free;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
return hist_field;
free:
destroy_hist_field(hist_field, 0);
return NULL;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
static void destroy_hist_fields(struct hist_trigger_data *hist_data)
{
unsigned int i;
for (i = 0; i < HIST_FIELDS_MAX; i++) {
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (hist_data->fields[i]) {
destroy_hist_field(hist_data->fields[i], 0);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
hist_data->fields[i] = NULL;
}
}
}
static struct ftrace_event_field *
parse_field(struct hist_trigger_data *hist_data, struct trace_event_file *file,
char *field_str, unsigned long *flags)
{
struct ftrace_event_field *field = NULL;
char *field_name, *modifier, *str;
modifier = str = kstrdup(field_str, GFP_KERNEL);
if (!modifier)
return ERR_PTR(-ENOMEM);
field_name = strsep(&modifier, ".");
if (modifier) {
if (strcmp(modifier, "hex") == 0)
*flags |= HIST_FIELD_FL_HEX;
else if (strcmp(modifier, "sym") == 0)
*flags |= HIST_FIELD_FL_SYM;
else if (strcmp(modifier, "sym-offset") == 0)
*flags |= HIST_FIELD_FL_SYM_OFFSET;
else if ((strcmp(modifier, "execname") == 0) &&
(strcmp(field_name, "common_pid") == 0))
*flags |= HIST_FIELD_FL_EXECNAME;
else if (strcmp(modifier, "syscall") == 0)
*flags |= HIST_FIELD_FL_SYSCALL;
else if (strcmp(modifier, "log2") == 0)
*flags |= HIST_FIELD_FL_LOG2;
else if (strcmp(modifier, "usecs") == 0)
*flags |= HIST_FIELD_FL_TIMESTAMP_USECS;
else {
field = ERR_PTR(-EINVAL);
goto out;
}
}
if (strcmp(field_name, "common_timestamp") == 0) {
*flags |= HIST_FIELD_FL_TIMESTAMP;
hist_data->enable_timestamps = true;
if (*flags & HIST_FIELD_FL_TIMESTAMP_USECS)
hist_data->attrs->ts_in_usecs = true;
} else {
field = trace_find_event_field(file->event_call, field_name);
if (!field || !field->size) {
field = ERR_PTR(-EINVAL);
goto out;
}
}
out:
kfree(str);
return field;
}
static struct hist_field *parse_atom(struct hist_trigger_data *hist_data,
struct trace_event_file *file, char *str,
unsigned long *flags, char *var_name)
{
struct ftrace_event_field *field = NULL;
struct hist_field *hist_field = NULL;
int ret = 0;
field = parse_field(hist_data, file, str, flags);
if (IS_ERR(field)) {
ret = PTR_ERR(field);
goto out;
}
hist_field = create_hist_field(hist_data, field, *flags, var_name);
if (!hist_field) {
ret = -ENOMEM;
goto out;
}
return hist_field;
out:
return ERR_PTR(ret);
}
static struct hist_field *parse_expr(struct hist_trigger_data *hist_data,
struct trace_event_file *file,
char *str, unsigned long flags,
char *var_name, unsigned int level);
static struct hist_field *parse_unary(struct hist_trigger_data *hist_data,
struct trace_event_file *file,
char *str, unsigned long flags,
char *var_name, unsigned int level)
{
struct hist_field *operand1, *expr = NULL;
unsigned long operand_flags;
int ret = 0;
char *s;
/* we support only -(xxx) i.e. explicit parens required */
if (level > 3) {
ret = -EINVAL;
goto free;
}
str++; /* skip leading '-' */
s = strchr(str, '(');
if (s)
str++;
else {
ret = -EINVAL;
goto free;
}
s = strrchr(str, ')');
if (s)
*s = '\0';
else {
ret = -EINVAL; /* no closing ')' */
goto free;
}
flags |= HIST_FIELD_FL_EXPR;
expr = create_hist_field(hist_data, NULL, flags, var_name);
if (!expr) {
ret = -ENOMEM;
goto free;
}
operand_flags = 0;
operand1 = parse_expr(hist_data, file, str, operand_flags, NULL, ++level);
if (IS_ERR(operand1)) {
ret = PTR_ERR(operand1);
goto free;
}
expr->flags |= operand1->flags &
(HIST_FIELD_FL_TIMESTAMP | HIST_FIELD_FL_TIMESTAMP_USECS);
expr->fn = hist_field_unary_minus;
expr->operands[0] = operand1;
expr->operator = FIELD_OP_UNARY_MINUS;
expr->name = expr_str(expr, 0);
return expr;
free:
destroy_hist_field(expr, 0);
return ERR_PTR(ret);
}
static int check_expr_operands(struct hist_field *operand1,
struct hist_field *operand2)
{
unsigned long operand1_flags = operand1->flags;
unsigned long operand2_flags = operand2->flags;
if ((operand1_flags & HIST_FIELD_FL_TIMESTAMP_USECS) !=
(operand2_flags & HIST_FIELD_FL_TIMESTAMP_USECS))
return -EINVAL;
return 0;
}
static struct hist_field *parse_expr(struct hist_trigger_data *hist_data,
struct trace_event_file *file,
char *str, unsigned long flags,
char *var_name, unsigned int level)
{
struct hist_field *operand1 = NULL, *operand2 = NULL, *expr = NULL;
unsigned long operand_flags;
int field_op, ret = -EINVAL;
char *sep, *operand1_str;
if (level > 3)
return ERR_PTR(-EINVAL);
field_op = contains_operator(str);
if (field_op == FIELD_OP_NONE)
return parse_atom(hist_data, file, str, &flags, var_name);
if (field_op == FIELD_OP_UNARY_MINUS)
return parse_unary(hist_data, file, str, flags, var_name, ++level);
switch (field_op) {
case FIELD_OP_MINUS:
sep = "-";
break;
case FIELD_OP_PLUS:
sep = "+";
break;
default:
goto free;
}
operand1_str = strsep(&str, sep);
if (!operand1_str || !str)
goto free;
operand_flags = 0;
operand1 = parse_atom(hist_data, file, operand1_str,
&operand_flags, NULL);
if (IS_ERR(operand1)) {
ret = PTR_ERR(operand1);
operand1 = NULL;
goto free;
}
/* rest of string could be another expression e.g. b+c in a+b+c */
operand_flags = 0;
operand2 = parse_expr(hist_data, file, str, operand_flags, NULL, ++level);
if (IS_ERR(operand2)) {
ret = PTR_ERR(operand2);
operand2 = NULL;
goto free;
}
ret = check_expr_operands(operand1, operand2);
if (ret)
goto free;
flags |= HIST_FIELD_FL_EXPR;
flags |= operand1->flags &
(HIST_FIELD_FL_TIMESTAMP | HIST_FIELD_FL_TIMESTAMP_USECS);
expr = create_hist_field(hist_data, NULL, flags, var_name);
if (!expr) {
ret = -ENOMEM;
goto free;
}
expr->operands[0] = operand1;
expr->operands[1] = operand2;
expr->operator = field_op;
expr->name = expr_str(expr, 0);
switch (field_op) {
case FIELD_OP_MINUS:
expr->fn = hist_field_minus;
break;
case FIELD_OP_PLUS:
expr->fn = hist_field_plus;
break;
default:
goto free;
}
return expr;
free:
destroy_hist_field(operand1, 0);
destroy_hist_field(operand2, 0);
destroy_hist_field(expr, 0);
return ERR_PTR(ret);
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static int create_hitcount_val(struct hist_trigger_data *hist_data)
{
hist_data->fields[HITCOUNT_IDX] =
create_hist_field(hist_data, NULL, HIST_FIELD_FL_HITCOUNT, NULL);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (!hist_data->fields[HITCOUNT_IDX])
return -ENOMEM;
hist_data->n_vals++;
hist_data->n_fields++;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (WARN_ON(hist_data->n_vals > TRACING_MAP_VALS_MAX))
return -EINVAL;
return 0;
}
static int __create_val_field(struct hist_trigger_data *hist_data,
unsigned int val_idx,
struct trace_event_file *file,
char *var_name, char *field_str,
unsigned long flags)
{
struct hist_field *hist_field;
int ret = 0;
hist_field = parse_expr(hist_data, file, field_str, flags, var_name, 0);
if (IS_ERR(hist_field)) {
ret = PTR_ERR(hist_field);
goto out;
}
hist_data->fields[val_idx] = hist_field;
++hist_data->n_vals;
++hist_data->n_fields;
if (WARN_ON(hist_data->n_vals > TRACING_MAP_VALS_MAX + TRACING_MAP_VARS_MAX))
ret = -EINVAL;
out:
return ret;
}
static int create_val_field(struct hist_trigger_data *hist_data,
unsigned int val_idx,
struct trace_event_file *file,
char *field_str)
{
if (WARN_ON(val_idx >= TRACING_MAP_VALS_MAX))
return -EINVAL;
return __create_val_field(hist_data, val_idx, file, NULL, field_str, 0);
}
static int create_var_field(struct hist_trigger_data *hist_data,
unsigned int val_idx,
struct trace_event_file *file,
char *var_name, char *expr_str)
{
unsigned long flags = 0;
if (WARN_ON(val_idx >= TRACING_MAP_VALS_MAX + TRACING_MAP_VARS_MAX))
return -EINVAL;
if (find_var(hist_data, file, var_name) && !hist_data->remove) {
return -EINVAL;
}
flags |= HIST_FIELD_FL_VAR;
hist_data->n_vars++;
if (WARN_ON(hist_data->n_vars > TRACING_MAP_VARS_MAX))
return -EINVAL;
return __create_val_field(hist_data, val_idx, file, var_name, expr_str, flags);
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static int create_val_fields(struct hist_trigger_data *hist_data,
struct trace_event_file *file)
{
char *fields_str, *field_str;
unsigned int i, j = 1;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
int ret;
ret = create_hitcount_val(hist_data);
if (ret)
goto out;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
fields_str = hist_data->attrs->vals_str;
if (!fields_str)
goto out;
strsep(&fields_str, "=");
if (!fields_str)
goto out;
for (i = 0, j = 1; i < TRACING_MAP_VALS_MAX &&
j < TRACING_MAP_VALS_MAX; i++) {
field_str = strsep(&fields_str, ",");
if (!field_str)
break;
if (strcmp(field_str, "hitcount") == 0)
continue;
ret = create_val_field(hist_data, j++, file, field_str);
if (ret)
goto out;
}
if (fields_str && (strcmp(fields_str, "hitcount") != 0))
ret = -EINVAL;
out:
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
return ret;
}
static int create_key_field(struct hist_trigger_data *hist_data,
unsigned int key_idx,
unsigned int key_offset,
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
struct trace_event_file *file,
char *field_str)
{
struct hist_field *hist_field = NULL;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
unsigned long flags = 0;
unsigned int key_size;
int ret = 0;
if (WARN_ON(key_idx >= HIST_FIELDS_MAX))
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
return -EINVAL;
flags |= HIST_FIELD_FL_KEY;
if (strcmp(field_str, "stacktrace") == 0) {
flags |= HIST_FIELD_FL_STACKTRACE;
key_size = sizeof(unsigned long) * HIST_STACKTRACE_DEPTH;
hist_field = create_hist_field(hist_data, NULL, flags, NULL);
} else {
hist_field = parse_expr(hist_data, file, field_str, flags,
NULL, 0);
if (IS_ERR(hist_field)) {
ret = PTR_ERR(hist_field);
goto out;
}
key_size = hist_field->size;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
hist_data->fields[key_idx] = hist_field;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
key_size = ALIGN(key_size, sizeof(u64));
hist_data->fields[key_idx]->size = key_size;
hist_data->fields[key_idx]->offset = key_offset;
hist_data->key_size += key_size;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (hist_data->key_size > HIST_KEY_SIZE_MAX) {
ret = -EINVAL;
goto out;
}
hist_data->n_keys++;
hist_data->n_fields++;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (WARN_ON(hist_data->n_keys > TRACING_MAP_KEYS_MAX))
return -EINVAL;
ret = key_size;
out:
return ret;
}
static int create_key_fields(struct hist_trigger_data *hist_data,
struct trace_event_file *file)
{
unsigned int i, key_offset = 0, n_vals = hist_data->n_vals;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
char *fields_str, *field_str;
int ret = -EINVAL;
fields_str = hist_data->attrs->keys_str;
if (!fields_str)
goto out;
strsep(&fields_str, "=");
if (!fields_str)
goto out;
for (i = n_vals; i < n_vals + TRACING_MAP_KEYS_MAX; i++) {
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
field_str = strsep(&fields_str, ",");
if (!field_str)
break;
ret = create_key_field(hist_data, i, key_offset,
file, field_str);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (ret < 0)
goto out;
key_offset += ret;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
if (fields_str) {
ret = -EINVAL;
goto out;
}
ret = 0;
out:
return ret;
}
static int create_var_fields(struct hist_trigger_data *hist_data,
struct trace_event_file *file)
{
unsigned int i, j = hist_data->n_vals;
int ret = 0;
unsigned int n_vars = hist_data->attrs->var_defs.n_vars;
for (i = 0; i < n_vars; i++) {
char *var_name = hist_data->attrs->var_defs.name[i];
char *expr = hist_data->attrs->var_defs.expr[i];
ret = create_var_field(hist_data, j++, file, var_name, expr);
if (ret)
goto out;
}
out:
return ret;
}
static void free_var_defs(struct hist_trigger_data *hist_data)
{
unsigned int i;
for (i = 0; i < hist_data->attrs->var_defs.n_vars; i++) {
kfree(hist_data->attrs->var_defs.name[i]);
kfree(hist_data->attrs->var_defs.expr[i]);
}
hist_data->attrs->var_defs.n_vars = 0;
}
static int parse_var_defs(struct hist_trigger_data *hist_data)
{
char *s, *str, *var_name, *field_str;
unsigned int i, j, n_vars = 0;
int ret = 0;
for (i = 0; i < hist_data->attrs->n_assignments; i++) {
str = hist_data->attrs->assignment_str[i];
for (j = 0; j < TRACING_MAP_VARS_MAX; j++) {
field_str = strsep(&str, ",");
if (!field_str)
break;
var_name = strsep(&field_str, "=");
if (!var_name || !field_str) {
ret = -EINVAL;
goto free;
}
if (n_vars == TRACING_MAP_VARS_MAX) {
ret = -EINVAL;
goto free;
}
s = kstrdup(var_name, GFP_KERNEL);
if (!s) {
ret = -ENOMEM;
goto free;
}
hist_data->attrs->var_defs.name[n_vars] = s;
s = kstrdup(field_str, GFP_KERNEL);
if (!s) {
kfree(hist_data->attrs->var_defs.name[n_vars]);
ret = -ENOMEM;
goto free;
}
hist_data->attrs->var_defs.expr[n_vars++] = s;
hist_data->attrs->var_defs.n_vars = n_vars;
}
}
return ret;
free:
free_var_defs(hist_data);
return ret;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static int create_hist_fields(struct hist_trigger_data *hist_data,
struct trace_event_file *file)
{
int ret;
ret = parse_var_defs(hist_data);
if (ret)
goto out;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
ret = create_val_fields(hist_data, file);
if (ret)
goto out;
ret = create_var_fields(hist_data, file);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (ret)
goto out;
ret = create_key_fields(hist_data, file);
if (ret)
goto out;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
out:
free_var_defs(hist_data);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
return ret;
}
static int is_descending(const char *str)
{
if (!str)
return 0;
if (strcmp(str, "descending") == 0)
return 1;
if (strcmp(str, "ascending") == 0)
return 0;
return -EINVAL;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static int create_sort_keys(struct hist_trigger_data *hist_data)
{
char *fields_str = hist_data->attrs->sort_key_str;
struct tracing_map_sort_key *sort_key;
int descending, ret = 0;
unsigned int i, j, k;
hist_data->n_sort_keys = 1; /* we always have at least one, hitcount */
if (!fields_str)
goto out;
strsep(&fields_str, "=");
if (!fields_str) {
ret = -EINVAL;
goto out;
}
for (i = 0; i < TRACING_MAP_SORT_KEYS_MAX; i++) {
struct hist_field *hist_field;
char *field_str, *field_name;
const char *test_name;
sort_key = &hist_data->sort_keys[i];
field_str = strsep(&fields_str, ",");
if (!field_str) {
if (i == 0)
ret = -EINVAL;
break;
}
if ((i == TRACING_MAP_SORT_KEYS_MAX - 1) && fields_str) {
ret = -EINVAL;
break;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
field_name = strsep(&field_str, ".");
if (!field_name) {
ret = -EINVAL;
break;
}
if (strcmp(field_name, "hitcount") == 0) {
descending = is_descending(field_str);
if (descending < 0) {
ret = descending;
break;
}
sort_key->descending = descending;
continue;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
for (j = 1, k = 1; j < hist_data->n_fields; j++) {
unsigned int idx;
hist_field = hist_data->fields[j];
if (hist_field->flags & HIST_FIELD_FL_VAR)
continue;
idx = k++;
test_name = hist_field_name(hist_field, 0);
if (strcmp(field_name, test_name) == 0) {
sort_key->field_idx = idx;
descending = is_descending(field_str);
if (descending < 0) {
ret = descending;
goto out;
}
sort_key->descending = descending;
break;
}
}
if (j == hist_data->n_fields) {
ret = -EINVAL;
break;
}
}
hist_data->n_sort_keys = i;
out:
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
return ret;
}
static void destroy_hist_data(struct hist_trigger_data *hist_data)
{
destroy_hist_trigger_attrs(hist_data->attrs);
destroy_hist_fields(hist_data);
tracing_map_destroy(hist_data->map);
kfree(hist_data);
}
static int create_tracing_map_fields(struct hist_trigger_data *hist_data)
{
struct tracing_map *map = hist_data->map;
struct ftrace_event_field *field;
struct hist_field *hist_field;
int i, idx;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
for_each_hist_field(i, hist_data) {
hist_field = hist_data->fields[i];
if (hist_field->flags & HIST_FIELD_FL_KEY) {
tracing_map_cmp_fn_t cmp_fn;
field = hist_field->field;
if (hist_field->flags & HIST_FIELD_FL_STACKTRACE)
cmp_fn = tracing_map_cmp_none;
else if (!field)
cmp_fn = tracing_map_cmp_num(hist_field->size,
hist_field->is_signed);
else if (is_string_field(field))
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
cmp_fn = tracing_map_cmp_string;
else
cmp_fn = tracing_map_cmp_num(field->size,
field->is_signed);
idx = tracing_map_add_key_field(map,
hist_field->offset,
cmp_fn);
} else if (!(hist_field->flags & HIST_FIELD_FL_VAR))
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
idx = tracing_map_add_sum_field(map);
if (idx < 0)
return idx;
if (hist_field->flags & HIST_FIELD_FL_VAR) {
idx = tracing_map_add_var(map);
if (idx < 0)
return idx;
hist_field->var.idx = idx;
hist_field->var.hist_data = hist_data;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
return 0;
}
static bool need_tracing_map_ops(struct hist_trigger_data *hist_data)
{
struct hist_field *key_field;
unsigned int i;
for_each_hist_key_field(i, hist_data) {
key_field = hist_data->fields[i];
if (key_field->flags & HIST_FIELD_FL_EXECNAME)
return true;
}
return false;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static struct hist_trigger_data *
create_hist_data(unsigned int map_bits,
struct hist_trigger_attrs *attrs,
struct trace_event_file *file,
bool remove)
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
{
const struct tracing_map_ops *map_ops = NULL;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
struct hist_trigger_data *hist_data;
int ret = 0;
hist_data = kzalloc(sizeof(*hist_data), GFP_KERNEL);
if (!hist_data)
return ERR_PTR(-ENOMEM);
hist_data->attrs = attrs;
hist_data->remove = remove;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
ret = create_hist_fields(hist_data, file);
if (ret)
goto free;
ret = create_sort_keys(hist_data);
if (ret)
goto free;
if (need_tracing_map_ops(hist_data))
map_ops = &hist_trigger_elt_comm_ops;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
hist_data->map = tracing_map_create(map_bits, hist_data->key_size,
map_ops, hist_data);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (IS_ERR(hist_data->map)) {
ret = PTR_ERR(hist_data->map);
hist_data->map = NULL;
goto free;
}
ret = create_tracing_map_fields(hist_data);
if (ret)
goto free;
ret = tracing_map_init(hist_data->map);
if (ret)
goto free;
hist_data->event_file = file;
out:
return hist_data;
free:
hist_data->attrs = NULL;
destroy_hist_data(hist_data);
hist_data = ERR_PTR(ret);
goto out;
}
static void hist_trigger_elt_update(struct hist_trigger_data *hist_data,
struct tracing_map_elt *elt, void *rec,
struct ring_buffer_event *rbe)
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
{
struct hist_field *hist_field;
unsigned int i, var_idx;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
u64 hist_val;
for_each_hist_val_field(i, hist_data) {
hist_field = hist_data->fields[i];
hist_val = hist_field->fn(hist_field, rec, rbe);
if (hist_field->flags & HIST_FIELD_FL_VAR) {
var_idx = hist_field->var.idx;
tracing_map_set_var(elt, var_idx, hist_val);
continue;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
tracing_map_update_sum(elt, i, hist_val);
}
for_each_hist_key_field(i, hist_data) {
hist_field = hist_data->fields[i];
if (hist_field->flags & HIST_FIELD_FL_VAR) {
hist_val = hist_field->fn(hist_field, rec, rbe);
var_idx = hist_field->var.idx;
tracing_map_set_var(elt, var_idx, hist_val);
}
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
static inline void add_to_key(char *compound_key, void *key,
struct hist_field *key_field, void *rec)
{
size_t size = key_field->size;
if (key_field->flags & HIST_FIELD_FL_STRING) {
struct ftrace_event_field *field;
field = key_field->field;
if (field->filter_type == FILTER_DYN_STRING)
size = *(u32 *)(rec + field->offset) >> 16;
else if (field->filter_type == FILTER_PTR_STRING)
size = strlen(key);
else if (field->filter_type == FILTER_STATIC_STRING)
size = field->size;
/* ensure NULL-termination */
if (size > key_field->size - 1)
size = key_field->size - 1;
}
memcpy(compound_key + key_field->offset, key, size);
}
static void event_hist_trigger(struct event_trigger_data *data, void *rec,
struct ring_buffer_event *rbe)
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
{
struct hist_trigger_data *hist_data = data->private_data;
bool use_compound_key = (hist_data->n_keys > 1);
unsigned long entries[HIST_STACKTRACE_DEPTH];
char compound_key[HIST_KEY_SIZE_MAX];
struct stack_trace stacktrace;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
struct hist_field *key_field;
struct tracing_map_elt *elt;
u64 field_contents;
void *key = NULL;
unsigned int i;
memset(compound_key, 0, hist_data->key_size);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
for_each_hist_key_field(i, hist_data) {
key_field = hist_data->fields[i];
if (key_field->flags & HIST_FIELD_FL_STACKTRACE) {
stacktrace.max_entries = HIST_STACKTRACE_DEPTH;
stacktrace.entries = entries;
stacktrace.nr_entries = 0;
stacktrace.skip = HIST_STACKTRACE_SKIP;
memset(stacktrace.entries, 0, HIST_STACKTRACE_SIZE);
save_stack_trace(&stacktrace);
key = entries;
} else {
field_contents = key_field->fn(key_field, rec, rbe);
if (key_field->flags & HIST_FIELD_FL_STRING) {
key = (void *)(unsigned long)field_contents;
use_compound_key = true;
} else
key = (void *)&field_contents;
}
if (use_compound_key)
add_to_key(compound_key, key, key_field, rec);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
if (use_compound_key)
key = compound_key;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
elt = tracing_map_insert(hist_data->map, key);
if (elt)
hist_trigger_elt_update(hist_data, elt, rec, rbe);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
static void hist_trigger_stacktrace_print(struct seq_file *m,
unsigned long *stacktrace_entries,
unsigned int max_entries)
{
char str[KSYM_SYMBOL_LEN];
unsigned int spaces = 8;
unsigned int i;
for (i = 0; i < max_entries; i++) {
if (stacktrace_entries[i] == ULONG_MAX)
return;
seq_printf(m, "%*c", 1 + spaces, ' ');
sprint_symbol(str, stacktrace_entries[i]);
seq_printf(m, "%s\n", str);
}
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static void
hist_trigger_entry_print(struct seq_file *m,
struct hist_trigger_data *hist_data, void *key,
struct tracing_map_elt *elt)
{
struct hist_field *key_field;
char str[KSYM_SYMBOL_LEN];
bool multiline = false;
const char *field_name;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
unsigned int i;
u64 uval;
seq_puts(m, "{ ");
for_each_hist_key_field(i, hist_data) {
key_field = hist_data->fields[i];
if (i > hist_data->n_vals)
seq_puts(m, ", ");
field_name = hist_field_name(key_field, 0);
if (key_field->flags & HIST_FIELD_FL_HEX) {
uval = *(u64 *)(key + key_field->offset);
seq_printf(m, "%s: %llx", field_name, uval);
} else if (key_field->flags & HIST_FIELD_FL_SYM) {
uval = *(u64 *)(key + key_field->offset);
sprint_symbol_no_offset(str, uval);
seq_printf(m, "%s: [%llx] %-45s", field_name,
uval, str);
} else if (key_field->flags & HIST_FIELD_FL_SYM_OFFSET) {
uval = *(u64 *)(key + key_field->offset);
sprint_symbol(str, uval);
seq_printf(m, "%s: [%llx] %-55s", field_name,
uval, str);
} else if (key_field->flags & HIST_FIELD_FL_EXECNAME) {
char *comm = elt->private_data;
uval = *(u64 *)(key + key_field->offset);
seq_printf(m, "%s: %-16s[%10llu]", field_name,
comm, uval);
} else if (key_field->flags & HIST_FIELD_FL_SYSCALL) {
const char *syscall_name;
uval = *(u64 *)(key + key_field->offset);
syscall_name = get_syscall_name(uval);
if (!syscall_name)
syscall_name = "unknown_syscall";
seq_printf(m, "%s: %-30s[%3llu]", field_name,
syscall_name, uval);
} else if (key_field->flags & HIST_FIELD_FL_STACKTRACE) {
seq_puts(m, "stacktrace:\n");
hist_trigger_stacktrace_print(m,
key + key_field->offset,
HIST_STACKTRACE_DEPTH);
multiline = true;
tracing: Add hist trigger 'log2' modifier Allow users to have numeric fields displayed as log2 values in case value range is very wide by appending '.log2' to field names. For example, # echo 'hist:key=bytes_req' > kmalloc/trigger # cat kmalloc/hist { bytes_req: 504 } hitcount: 1 { bytes_req: 11 } hitcount: 1 { bytes_req: 104 } hitcount: 1 { bytes_req: 48 } hitcount: 1 { bytes_req: 2048 } hitcount: 1 { bytes_req: 4096 } hitcount: 1 { bytes_req: 240 } hitcount: 1 { bytes_req: 392 } hitcount: 1 { bytes_req: 13 } hitcount: 1 { bytes_req: 28 } hitcount: 1 { bytes_req: 12 } hitcount: 1 { bytes_req: 64 } hitcount: 2 { bytes_req: 128 } hitcount: 2 { bytes_req: 32 } hitcount: 2 { bytes_req: 8 } hitcount: 11 { bytes_req: 10 } hitcount: 13 { bytes_req: 24 } hitcount: 25 { bytes_req: 160 } hitcount: 29 { bytes_req: 16 } hitcount: 33 { bytes_req: 80 } hitcount: 36 When using '.log2' modifier, the output looks like: # echo 'hist:key=bytes_req.log2' > kmalloc/trigger # cat kmalloc/hist { bytes_req: ~ 2^12 } hitcount: 1 { bytes_req: ~ 2^11 } hitcount: 1 { bytes_req: ~ 2^9 } hitcount: 2 { bytes_req: ~ 2^6 } hitcount: 3 { bytes_req: ~ 2^3 } hitcount: 13 { bytes_req: ~ 2^5 } hitcount: 19 { bytes_req: ~ 2^8 } hitcount: 49 { bytes_req: ~ 2^7 } hitcount: 57 { bytes_req: ~ 2^4 } hitcount: 74 Link: http://lkml.kernel.org/r/7ff396b246c6a881f46b979735fddf05a0d6c71a.1457029949.git.tom.zanussi@linux.intel.com Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:55:02 +08:00
} else if (key_field->flags & HIST_FIELD_FL_LOG2) {
seq_printf(m, "%s: ~ 2^%-2llu", field_name,
tracing: Add hist trigger 'log2' modifier Allow users to have numeric fields displayed as log2 values in case value range is very wide by appending '.log2' to field names. For example, # echo 'hist:key=bytes_req' > kmalloc/trigger # cat kmalloc/hist { bytes_req: 504 } hitcount: 1 { bytes_req: 11 } hitcount: 1 { bytes_req: 104 } hitcount: 1 { bytes_req: 48 } hitcount: 1 { bytes_req: 2048 } hitcount: 1 { bytes_req: 4096 } hitcount: 1 { bytes_req: 240 } hitcount: 1 { bytes_req: 392 } hitcount: 1 { bytes_req: 13 } hitcount: 1 { bytes_req: 28 } hitcount: 1 { bytes_req: 12 } hitcount: 1 { bytes_req: 64 } hitcount: 2 { bytes_req: 128 } hitcount: 2 { bytes_req: 32 } hitcount: 2 { bytes_req: 8 } hitcount: 11 { bytes_req: 10 } hitcount: 13 { bytes_req: 24 } hitcount: 25 { bytes_req: 160 } hitcount: 29 { bytes_req: 16 } hitcount: 33 { bytes_req: 80 } hitcount: 36 When using '.log2' modifier, the output looks like: # echo 'hist:key=bytes_req.log2' > kmalloc/trigger # cat kmalloc/hist { bytes_req: ~ 2^12 } hitcount: 1 { bytes_req: ~ 2^11 } hitcount: 1 { bytes_req: ~ 2^9 } hitcount: 2 { bytes_req: ~ 2^6 } hitcount: 3 { bytes_req: ~ 2^3 } hitcount: 13 { bytes_req: ~ 2^5 } hitcount: 19 { bytes_req: ~ 2^8 } hitcount: 49 { bytes_req: ~ 2^7 } hitcount: 57 { bytes_req: ~ 2^4 } hitcount: 74 Link: http://lkml.kernel.org/r/7ff396b246c6a881f46b979735fddf05a0d6c71a.1457029949.git.tom.zanussi@linux.intel.com Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:55:02 +08:00
*(u64 *)(key + key_field->offset));
} else if (key_field->flags & HIST_FIELD_FL_STRING) {
seq_printf(m, "%s: %-50s", field_name,
(char *)(key + key_field->offset));
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
} else {
uval = *(u64 *)(key + key_field->offset);
seq_printf(m, "%s: %10llu", field_name, uval);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
}
if (!multiline)
seq_puts(m, " ");
seq_puts(m, "}");
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
seq_printf(m, " hitcount: %10llu",
tracing_map_read_sum(elt, HITCOUNT_IDX));
for (i = 1; i < hist_data->n_vals; i++) {
field_name = hist_field_name(hist_data->fields[i], 0);
if (hist_data->fields[i]->flags & HIST_FIELD_FL_VAR ||
hist_data->fields[i]->flags & HIST_FIELD_FL_EXPR)
continue;
if (hist_data->fields[i]->flags & HIST_FIELD_FL_HEX) {
seq_printf(m, " %s: %10llx", field_name,
tracing_map_read_sum(elt, i));
} else {
seq_printf(m, " %s: %10llu", field_name,
tracing_map_read_sum(elt, i));
}
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
seq_puts(m, "\n");
}
static int print_entries(struct seq_file *m,
struct hist_trigger_data *hist_data)
{
struct tracing_map_sort_entry **sort_entries = NULL;
struct tracing_map *map = hist_data->map;
int i, n_entries;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
n_entries = tracing_map_sort_entries(map, hist_data->sort_keys,
hist_data->n_sort_keys,
&sort_entries);
if (n_entries < 0)
return n_entries;
for (i = 0; i < n_entries; i++)
hist_trigger_entry_print(m, hist_data,
sort_entries[i]->key,
sort_entries[i]->elt);
tracing_map_destroy_sort_entries(sort_entries, n_entries);
return n_entries;
}
static void hist_trigger_show(struct seq_file *m,
struct event_trigger_data *data, int n)
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
{
struct hist_trigger_data *hist_data;
int n_entries;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (n > 0)
seq_puts(m, "\n\n");
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
seq_puts(m, "# event histogram\n#\n# trigger info: ");
data->ops->print(m, data->ops, data);
seq_puts(m, "#\n\n");
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
hist_data = data->private_data;
n_entries = print_entries(m, hist_data);
if (n_entries < 0)
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
n_entries = 0;
seq_printf(m, "\nTotals:\n Hits: %llu\n Entries: %u\n Dropped: %llu\n",
(u64)atomic64_read(&hist_data->map->hits),
n_entries, (u64)atomic64_read(&hist_data->map->drops));
}
static int hist_show(struct seq_file *m, void *v)
{
struct event_trigger_data *data;
struct trace_event_file *event_file;
int n = 0, ret = 0;
mutex_lock(&event_mutex);
event_file = event_file_data(m->private);
if (unlikely(!event_file)) {
ret = -ENODEV;
goto out_unlock;
}
list_for_each_entry_rcu(data, &event_file->triggers, list) {
if (data->cmd_ops->trigger_type == ETT_EVENT_HIST)
hist_trigger_show(m, data, n++);
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
out_unlock:
mutex_unlock(&event_mutex);
return ret;
}
static int event_hist_open(struct inode *inode, struct file *file)
{
return single_open(file, hist_show, file);
}
const struct file_operations event_hist_fops = {
.open = event_hist_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void hist_field_print(struct seq_file *m, struct hist_field *hist_field)
{
const char *field_name = hist_field_name(hist_field, 0);
if (hist_field->var.name)
seq_printf(m, "%s=", hist_field->var.name);
if (hist_field->flags & HIST_FIELD_FL_TIMESTAMP)
seq_puts(m, "common_timestamp");
else if (field_name)
seq_printf(m, "%s", field_name);
if (hist_field->flags) {
const char *flags_str = get_hist_field_flags(hist_field);
if (flags_str)
seq_printf(m, ".%s", flags_str);
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
static int event_hist_trigger_print(struct seq_file *m,
struct event_trigger_ops *ops,
struct event_trigger_data *data)
{
struct hist_trigger_data *hist_data = data->private_data;
struct hist_field *field;
bool have_var = false;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
unsigned int i;
seq_puts(m, "hist:");
if (data->name)
seq_printf(m, "%s:", data->name);
seq_puts(m, "keys=");
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
for_each_hist_key_field(i, hist_data) {
field = hist_data->fields[i];
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (i > hist_data->n_vals)
seq_puts(m, ",");
if (field->flags & HIST_FIELD_FL_STACKTRACE)
seq_puts(m, "stacktrace");
else
hist_field_print(m, field);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
}
seq_puts(m, ":vals=");
for_each_hist_val_field(i, hist_data) {
field = hist_data->fields[i];
if (field->flags & HIST_FIELD_FL_VAR) {
have_var = true;
continue;
}
if (i == HITCOUNT_IDX)
seq_puts(m, "hitcount");
else {
seq_puts(m, ",");
hist_field_print(m, field);
}
}
if (have_var) {
unsigned int n = 0;
seq_puts(m, ":");
for_each_hist_val_field(i, hist_data) {
field = hist_data->fields[i];
if (field->flags & HIST_FIELD_FL_VAR) {
if (n++)
seq_puts(m, ",");
hist_field_print(m, field);
}
}
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
seq_puts(m, ":sort=");
for (i = 0; i < hist_data->n_sort_keys; i++) {
struct tracing_map_sort_key *sort_key;
unsigned int idx, first_key_idx;
/* skip VAR vals */
first_key_idx = hist_data->n_vals - hist_data->n_vars;
sort_key = &hist_data->sort_keys[i];
idx = sort_key->field_idx;
if (WARN_ON(idx >= HIST_FIELDS_MAX))
return -EINVAL;
if (i > 0)
seq_puts(m, ",");
if (idx == HITCOUNT_IDX)
seq_puts(m, "hitcount");
else {
if (idx >= first_key_idx)
idx += hist_data->n_vars;
hist_field_print(m, hist_data->fields[idx]);
}
if (sort_key->descending)
seq_puts(m, ".descending");
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
seq_printf(m, ":size=%u", (1 << hist_data->map->map_bits));
if (data->filter_str)
seq_printf(m, " if %s", data->filter_str);
if (data->paused)
seq_puts(m, " [paused]");
else
seq_puts(m, " [active]");
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
seq_putc(m, '\n');
return 0;
}
static int event_hist_trigger_init(struct event_trigger_ops *ops,
struct event_trigger_data *data)
{
struct hist_trigger_data *hist_data = data->private_data;
if (!data->ref && hist_data->attrs->name)
save_named_trigger(hist_data->attrs->name, data);
data->ref++;
return 0;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static void event_hist_trigger_free(struct event_trigger_ops *ops,
struct event_trigger_data *data)
{
struct hist_trigger_data *hist_data = data->private_data;
if (WARN_ON_ONCE(data->ref <= 0))
return;
data->ref--;
if (!data->ref) {
if (data->name)
del_named_trigger(data);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
trigger_data_free(data);
destroy_hist_data(hist_data);
}
}
static struct event_trigger_ops event_hist_trigger_ops = {
.func = event_hist_trigger,
.print = event_hist_trigger_print,
.init = event_hist_trigger_init,
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
.free = event_hist_trigger_free,
};
static int event_hist_trigger_named_init(struct event_trigger_ops *ops,
struct event_trigger_data *data)
{
data->ref++;
save_named_trigger(data->named_data->name, data);
event_hist_trigger_init(ops, data->named_data);
return 0;
}
static void event_hist_trigger_named_free(struct event_trigger_ops *ops,
struct event_trigger_data *data)
{
if (WARN_ON_ONCE(data->ref <= 0))
return;
event_hist_trigger_free(ops, data->named_data);
data->ref--;
if (!data->ref) {
del_named_trigger(data);
trigger_data_free(data);
}
}
static struct event_trigger_ops event_hist_trigger_named_ops = {
.func = event_hist_trigger,
.print = event_hist_trigger_print,
.init = event_hist_trigger_named_init,
.free = event_hist_trigger_named_free,
};
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static struct event_trigger_ops *event_hist_get_trigger_ops(char *cmd,
char *param)
{
return &event_hist_trigger_ops;
}
static void hist_clear(struct event_trigger_data *data)
{
struct hist_trigger_data *hist_data = data->private_data;
if (data->name)
pause_named_trigger(data);
synchronize_sched();
tracing_map_clear(hist_data->map);
if (data->name)
unpause_named_trigger(data);
}
static bool compatible_field(struct ftrace_event_field *field,
struct ftrace_event_field *test_field)
{
if (field == test_field)
return true;
if (field == NULL || test_field == NULL)
return false;
if (strcmp(field->name, test_field->name) != 0)
return false;
if (strcmp(field->type, test_field->type) != 0)
return false;
if (field->size != test_field->size)
return false;
if (field->is_signed != test_field->is_signed)
return false;
return true;
}
static bool hist_trigger_match(struct event_trigger_data *data,
struct event_trigger_data *data_test,
struct event_trigger_data *named_data,
bool ignore_filter)
{
struct tracing_map_sort_key *sort_key, *sort_key_test;
struct hist_trigger_data *hist_data, *hist_data_test;
struct hist_field *key_field, *key_field_test;
unsigned int i;
if (named_data && (named_data != data_test) &&
(named_data != data_test->named_data))
return false;
if (!named_data && is_named_trigger(data_test))
return false;
hist_data = data->private_data;
hist_data_test = data_test->private_data;
if (hist_data->n_vals != hist_data_test->n_vals ||
hist_data->n_fields != hist_data_test->n_fields ||
hist_data->n_sort_keys != hist_data_test->n_sort_keys)
return false;
if (!ignore_filter) {
if ((data->filter_str && !data_test->filter_str) ||
(!data->filter_str && data_test->filter_str))
return false;
}
for_each_hist_field(i, hist_data) {
key_field = hist_data->fields[i];
key_field_test = hist_data_test->fields[i];
if (key_field->flags != key_field_test->flags)
return false;
if (!compatible_field(key_field->field, key_field_test->field))
return false;
if (key_field->offset != key_field_test->offset)
return false;
if (key_field->size != key_field_test->size)
return false;
if (key_field->is_signed != key_field_test->is_signed)
return false;
if (!!key_field->var.name != !!key_field_test->var.name)
return false;
if (key_field->var.name &&
strcmp(key_field->var.name, key_field_test->var.name) != 0)
return false;
}
for (i = 0; i < hist_data->n_sort_keys; i++) {
sort_key = &hist_data->sort_keys[i];
sort_key_test = &hist_data_test->sort_keys[i];
if (sort_key->field_idx != sort_key_test->field_idx ||
sort_key->descending != sort_key_test->descending)
return false;
}
if (!ignore_filter && data->filter_str &&
(strcmp(data->filter_str, data_test->filter_str) != 0))
return false;
return true;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static int hist_register_trigger(char *glob, struct event_trigger_ops *ops,
struct event_trigger_data *data,
struct trace_event_file *file)
{
struct hist_trigger_data *hist_data = data->private_data;
struct event_trigger_data *test, *named_data = NULL;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
int ret = 0;
if (hist_data->attrs->name) {
named_data = find_named_trigger(hist_data->attrs->name);
if (named_data) {
if (!hist_trigger_match(data, named_data, named_data,
true)) {
ret = -EINVAL;
goto out;
}
}
}
if (hist_data->attrs->name && !named_data)
goto new;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
list_for_each_entry_rcu(test, &file->triggers, list) {
if (test->cmd_ops->trigger_type == ETT_EVENT_HIST) {
if (!hist_trigger_match(data, test, named_data, false))
continue;
if (hist_data->attrs->pause)
test->paused = true;
else if (hist_data->attrs->cont)
test->paused = false;
else if (hist_data->attrs->clear)
hist_clear(test);
else
ret = -EEXIST;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
goto out;
}
}
new:
if (hist_data->attrs->cont || hist_data->attrs->clear) {
ret = -ENOENT;
goto out;
}
if (hist_data->attrs->pause)
data->paused = true;
if (named_data) {
destroy_hist_data(data->private_data);
data->private_data = named_data->private_data;
set_named_trigger_data(data, named_data);
data->ops = &event_hist_trigger_named_ops;
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (data->ops->init) {
ret = data->ops->init(data->ops, data);
if (ret < 0)
goto out;
}
list_add_rcu(&data->list, &file->triggers);
ret++;
update_cond_flag(file);
if (hist_data->enable_timestamps)
tracing_set_time_stamp_abs(file->tr, true);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (trace_event_trigger_enable_disable(file, 1) < 0) {
list_del_rcu(&data->list);
update_cond_flag(file);
ret--;
}
out:
return ret;
}
static void hist_unregister_trigger(char *glob, struct event_trigger_ops *ops,
struct event_trigger_data *data,
struct trace_event_file *file)
{
struct hist_trigger_data *hist_data = data->private_data;
struct event_trigger_data *test, *named_data = NULL;
bool unregistered = false;
if (hist_data->attrs->name)
named_data = find_named_trigger(hist_data->attrs->name);
list_for_each_entry_rcu(test, &file->triggers, list) {
if (test->cmd_ops->trigger_type == ETT_EVENT_HIST) {
if (!hist_trigger_match(data, test, named_data, false))
continue;
unregistered = true;
list_del_rcu(&test->list);
trace_event_trigger_enable_disable(file, 0);
update_cond_flag(file);
break;
}
}
if (unregistered && test->ops->free)
test->ops->free(test->ops, test);
if (hist_data->enable_timestamps) {
if (!hist_data->remove || unregistered)
tracing_set_time_stamp_abs(file->tr, false);
}
}
static void hist_unreg_all(struct trace_event_file *file)
{
struct event_trigger_data *test, *n;
struct hist_trigger_data *hist_data;
list_for_each_entry_safe(test, n, &file->triggers, list) {
if (test->cmd_ops->trigger_type == ETT_EVENT_HIST) {
hist_data = test->private_data;
list_del_rcu(&test->list);
trace_event_trigger_enable_disable(file, 0);
update_cond_flag(file);
if (hist_data->enable_timestamps)
tracing_set_time_stamp_abs(file->tr, false);
if (test->ops->free)
test->ops->free(test->ops, test);
}
}
}
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
static int event_hist_trigger_func(struct event_command *cmd_ops,
struct trace_event_file *file,
char *glob, char *cmd, char *param)
{
unsigned int hist_trigger_bits = TRACING_MAP_BITS_DEFAULT;
struct event_trigger_data *trigger_data;
struct hist_trigger_attrs *attrs;
struct event_trigger_ops *trigger_ops;
struct hist_trigger_data *hist_data;
bool remove = false;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
char *trigger;
int ret = 0;
if (!param)
return -EINVAL;
if (glob[0] == '!')
remove = true;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
/* separate the trigger from the filter (k:v [if filter]) */
trigger = strsep(&param, " \t");
if (!trigger)
return -EINVAL;
attrs = parse_hist_trigger_attrs(trigger);
if (IS_ERR(attrs))
return PTR_ERR(attrs);
if (attrs->map_bits)
hist_trigger_bits = attrs->map_bits;
hist_data = create_hist_data(hist_trigger_bits, attrs, file, remove);
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
if (IS_ERR(hist_data)) {
destroy_hist_trigger_attrs(attrs);
return PTR_ERR(hist_data);
}
trigger_ops = cmd_ops->get_trigger_ops(cmd, trigger);
ret = -ENOMEM;
trigger_data = kzalloc(sizeof(*trigger_data), GFP_KERNEL);
if (!trigger_data)
goto out_free;
trigger_data->count = -1;
trigger_data->ops = trigger_ops;
trigger_data->cmd_ops = cmd_ops;
INIT_LIST_HEAD(&trigger_data->list);
RCU_INIT_POINTER(trigger_data->filter, NULL);
trigger_data->private_data = hist_data;
/* if param is non-empty, it's supposed to be a filter */
if (param && cmd_ops->set_filter) {
ret = cmd_ops->set_filter(param, trigger_data, file);
if (ret < 0)
goto out_free;
}
if (remove) {
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
cmd_ops->unreg(glob+1, trigger_ops, trigger_data, file);
ret = 0;
goto out_free;
}
ret = cmd_ops->reg(glob, trigger_ops, trigger_data, file);
/*
* The above returns on success the # of triggers registered,
* but if it didn't register any it returns zero. Consider no
* triggers registered a failure too.
*/
if (!ret) {
if (!(attrs->pause || attrs->cont || attrs->clear))
ret = -ENOENT;
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
goto out_free;
} else if (ret < 0)
goto out_free;
/* Just return zero, not the number of registered triggers */
ret = 0;
out:
return ret;
out_free:
if (cmd_ops->set_filter)
cmd_ops->set_filter(NULL, trigger_data, NULL);
kfree(trigger_data);
destroy_hist_data(hist_data);
goto out;
}
static struct event_command trigger_hist_cmd = {
.name = "hist",
.trigger_type = ETT_EVENT_HIST,
.flags = EVENT_CMD_FL_NEEDS_REC,
.func = event_hist_trigger_func,
.reg = hist_register_trigger,
.unreg = hist_unregister_trigger,
.unreg_all = hist_unreg_all,
tracing: Add 'hist' event trigger command 'hist' triggers allow users to continually aggregate trace events, which can then be viewed afterwards by simply reading a 'hist' file containing the aggregation in a human-readable format. The basic idea is very simple and boils down to a mechanism whereby trace events, rather than being exhaustively dumped in raw form and viewed directly, are automatically 'compressed' into meaningful tables completely defined by the user. This is done strictly via single-line command-line commands and without the aid of any kind of programming language or interpreter. A surprising number of typical use cases can be accomplished by users via this simple mechanism. In fact, a large number of the tasks that users typically do using the more complicated script-based tracing tools, at least during the initial stages of an investigation, can be accomplished by simply specifying a set of keys and values to be used in the creation of a hash table. The Linux kernel trace event subsystem happens to provide an extensive list of keys and values ready-made for such a purpose in the form of the event format files associated with each trace event. By simply consulting the format file for field names of interest and by plugging them into the hist trigger command, users can create an endless number of useful aggregations to help with investigating various properties of the system. See Documentation/trace/events.txt for examples. hist triggers are implemented on top of the existing event trigger infrastructure, and as such are consistent with the existing triggers from a user's perspective as well. The basic syntax follows the existing trigger syntax. Users start an aggregation by writing a 'hist' trigger to the event of interest's trigger file: # echo hist:keys=xxx [ if filter] > event/trigger Once a hist trigger has been set up, by default it continually aggregates every matching event into a hash table using the event key and a value field named 'hitcount'. To view the aggregation at any point in time, simply read the 'hist' file in the same directory as the 'trigger' file: # cat event/hist The detailed syntax provides additional options for user control, and is described exhaustively in Documentation/trace/events.txt and in the virtual tracing/README file in the tracing subsystem. Link: http://lkml.kernel.org/r/72d263b5e1853fe9c314953b65833c3aa75479f2.1457029949.git.tom.zanussi@linux.intel.com Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com> Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Reviewed-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2016-03-04 02:54:42 +08:00
.get_trigger_ops = event_hist_get_trigger_ops,
.set_filter = set_trigger_filter,
};
__init int register_trigger_hist_cmd(void)
{
int ret;
ret = register_event_command(&trigger_hist_cmd);
WARN_ON(ret < 0);
return ret;
}
static void
hist_enable_trigger(struct event_trigger_data *data, void *rec,
struct ring_buffer_event *event)
{
struct enable_trigger_data *enable_data = data->private_data;
struct event_trigger_data *test;
list_for_each_entry_rcu(test, &enable_data->file->triggers, list) {
if (test->cmd_ops->trigger_type == ETT_EVENT_HIST) {
if (enable_data->enable)
test->paused = false;
else
test->paused = true;
}
}
}
static void
hist_enable_count_trigger(struct event_trigger_data *data, void *rec,
struct ring_buffer_event *event)
{
if (!data->count)
return;
if (data->count != -1)
(data->count)--;
hist_enable_trigger(data, rec, event);
}
static struct event_trigger_ops hist_enable_trigger_ops = {
.func = hist_enable_trigger,
.print = event_enable_trigger_print,
.init = event_trigger_init,
.free = event_enable_trigger_free,
};
static struct event_trigger_ops hist_enable_count_trigger_ops = {
.func = hist_enable_count_trigger,
.print = event_enable_trigger_print,
.init = event_trigger_init,
.free = event_enable_trigger_free,
};
static struct event_trigger_ops hist_disable_trigger_ops = {
.func = hist_enable_trigger,
.print = event_enable_trigger_print,
.init = event_trigger_init,
.free = event_enable_trigger_free,
};
static struct event_trigger_ops hist_disable_count_trigger_ops = {
.func = hist_enable_count_trigger,
.print = event_enable_trigger_print,
.init = event_trigger_init,
.free = event_enable_trigger_free,
};
static struct event_trigger_ops *
hist_enable_get_trigger_ops(char *cmd, char *param)
{
struct event_trigger_ops *ops;
bool enable;
enable = (strcmp(cmd, ENABLE_HIST_STR) == 0);
if (enable)
ops = param ? &hist_enable_count_trigger_ops :
&hist_enable_trigger_ops;
else
ops = param ? &hist_disable_count_trigger_ops :
&hist_disable_trigger_ops;
return ops;
}
static void hist_enable_unreg_all(struct trace_event_file *file)
{
struct event_trigger_data *test, *n;
list_for_each_entry_safe(test, n, &file->triggers, list) {
if (test->cmd_ops->trigger_type == ETT_HIST_ENABLE) {
list_del_rcu(&test->list);
update_cond_flag(file);
trace_event_trigger_enable_disable(file, 0);
if (test->ops->free)
test->ops->free(test->ops, test);
}
}
}
static struct event_command trigger_hist_enable_cmd = {
.name = ENABLE_HIST_STR,
.trigger_type = ETT_HIST_ENABLE,
.func = event_enable_trigger_func,
.reg = event_enable_register_trigger,
.unreg = event_enable_unregister_trigger,
.unreg_all = hist_enable_unreg_all,
.get_trigger_ops = hist_enable_get_trigger_ops,
.set_filter = set_trigger_filter,
};
static struct event_command trigger_hist_disable_cmd = {
.name = DISABLE_HIST_STR,
.trigger_type = ETT_HIST_ENABLE,
.func = event_enable_trigger_func,
.reg = event_enable_register_trigger,
.unreg = event_enable_unregister_trigger,
.unreg_all = hist_enable_unreg_all,
.get_trigger_ops = hist_enable_get_trigger_ops,
.set_filter = set_trigger_filter,
};
static __init void unregister_trigger_hist_enable_disable_cmds(void)
{
unregister_event_command(&trigger_hist_enable_cmd);
unregister_event_command(&trigger_hist_disable_cmd);
}
__init int register_trigger_hist_enable_disable_cmds(void)
{
int ret;
ret = register_event_command(&trigger_hist_enable_cmd);
if (WARN_ON(ret < 0))
return ret;
ret = register_event_command(&trigger_hist_disable_cmd);
if (WARN_ON(ret < 0))
unregister_trigger_hist_enable_disable_cmds();
return ret;
}