OpenCloudOS-Kernel/include/uapi/linux/tc_act/tc_pedit.h

71 lines
1.5 KiB
C
Raw Normal View History

License cleanup: add SPDX license identifier to uapi header files with no license Many user space API headers are missing licensing information, which makes it hard for compliance tools to determine the correct license. By default are files without license information under the default license of the kernel, which is GPLV2. Marking them GPLV2 would exclude them from being included in non GPLV2 code, which is obviously not intended. The user space API headers fall under the syscall exception which is in the kernels COPYING file: NOTE! This copyright does *not* cover user programs that use kernel services by normal system calls - this is merely considered normal use of the kernel, and does *not* fall under the heading of "derived work". otherwise syscall usage would not be possible. Update the files which contain no license information with an SPDX license identifier. The chosen identifier is 'GPL-2.0 WITH Linux-syscall-note' which is the officially assigned identifier for the Linux syscall exception. SPDX license identifiers are a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. See the previous patch in this series for the methodology of how this patch was researched. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:08:43 +08:00
/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
#ifndef __LINUX_TC_PED_H
#define __LINUX_TC_PED_H
#include <linux/types.h>
#include <linux/pkt_cls.h>
enum {
TCA_PEDIT_UNSPEC,
TCA_PEDIT_TM,
TCA_PEDIT_PARMS,
TCA_PEDIT_PAD,
net/act_pedit: Support using offset relative to the conventional network headers Extend pedit to enable the user setting offset relative to network headers. This change would enable to work with more complex header schemes (vs the simple IPv4 case) where setting a fixed offset relative to the network header is not enough. After this patch, the action has information about the exact header type and field inside this header. This information could be used later on for hardware offloading of pedit. Backward compatibility was being kept: 1. Old kernel <-> new userspace 2. New kernel <-> old userspace 3. add rule using new userspace <-> dump using old userspace 4. add rule using old userspace <-> dump using new userspace When using the extended api, new netlink attributes are being used. This way, operation will fail in (1) and (3) - and no malformed rule be added or dumped. Of course, new user space that doesn't need the new functionality can use the old netlink attributes and operation will succeed. Since action can support both api's, (2) should work, and it is easy to write the new user space to have (4) work. The action is having a strict check that only header types and commands it can handle are accepted. This way future additions will be much easier. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action pedit munge tcp dport set 8080 pipe \ action mirred egress redirect dev veth0 Will forward tcp port whose original dest port is 80, while modifying the destination port to 8080. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 15:56:07 +08:00
TCA_PEDIT_PARMS_EX,
TCA_PEDIT_KEYS_EX,
TCA_PEDIT_KEY_EX,
__TCA_PEDIT_MAX
};
#define TCA_PEDIT_MAX (__TCA_PEDIT_MAX - 1)
net/act_pedit: Support using offset relative to the conventional network headers Extend pedit to enable the user setting offset relative to network headers. This change would enable to work with more complex header schemes (vs the simple IPv4 case) where setting a fixed offset relative to the network header is not enough. After this patch, the action has information about the exact header type and field inside this header. This information could be used later on for hardware offloading of pedit. Backward compatibility was being kept: 1. Old kernel <-> new userspace 2. New kernel <-> old userspace 3. add rule using new userspace <-> dump using old userspace 4. add rule using old userspace <-> dump using new userspace When using the extended api, new netlink attributes are being used. This way, operation will fail in (1) and (3) - and no malformed rule be added or dumped. Of course, new user space that doesn't need the new functionality can use the old netlink attributes and operation will succeed. Since action can support both api's, (2) should work, and it is easy to write the new user space to have (4) work. The action is having a strict check that only header types and commands it can handle are accepted. This way future additions will be much easier. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action pedit munge tcp dport set 8080 pipe \ action mirred egress redirect dev veth0 Will forward tcp port whose original dest port is 80, while modifying the destination port to 8080. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 15:56:07 +08:00
enum {
TCA_PEDIT_KEY_EX_HTYPE = 1,
TCA_PEDIT_KEY_EX_CMD = 2,
net/act_pedit: Support using offset relative to the conventional network headers Extend pedit to enable the user setting offset relative to network headers. This change would enable to work with more complex header schemes (vs the simple IPv4 case) where setting a fixed offset relative to the network header is not enough. After this patch, the action has information about the exact header type and field inside this header. This information could be used later on for hardware offloading of pedit. Backward compatibility was being kept: 1. Old kernel <-> new userspace 2. New kernel <-> old userspace 3. add rule using new userspace <-> dump using old userspace 4. add rule using old userspace <-> dump using new userspace When using the extended api, new netlink attributes are being used. This way, operation will fail in (1) and (3) - and no malformed rule be added or dumped. Of course, new user space that doesn't need the new functionality can use the old netlink attributes and operation will succeed. Since action can support both api's, (2) should work, and it is easy to write the new user space to have (4) work. The action is having a strict check that only header types and commands it can handle are accepted. This way future additions will be much easier. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action pedit munge tcp dport set 8080 pipe \ action mirred egress redirect dev veth0 Will forward tcp port whose original dest port is 80, while modifying the destination port to 8080. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 15:56:07 +08:00
__TCA_PEDIT_KEY_EX_MAX
};
net/act_pedit: Support using offset relative to the conventional network headers Extend pedit to enable the user setting offset relative to network headers. This change would enable to work with more complex header schemes (vs the simple IPv4 case) where setting a fixed offset relative to the network header is not enough. After this patch, the action has information about the exact header type and field inside this header. This information could be used later on for hardware offloading of pedit. Backward compatibility was being kept: 1. Old kernel <-> new userspace 2. New kernel <-> old userspace 3. add rule using new userspace <-> dump using old userspace 4. add rule using old userspace <-> dump using new userspace When using the extended api, new netlink attributes are being used. This way, operation will fail in (1) and (3) - and no malformed rule be added or dumped. Of course, new user space that doesn't need the new functionality can use the old netlink attributes and operation will succeed. Since action can support both api's, (2) should work, and it is easy to write the new user space to have (4) work. The action is having a strict check that only header types and commands it can handle are accepted. This way future additions will be much easier. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action pedit munge tcp dport set 8080 pipe \ action mirred egress redirect dev veth0 Will forward tcp port whose original dest port is 80, while modifying the destination port to 8080. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 15:56:07 +08:00
#define TCA_PEDIT_KEY_EX_MAX (__TCA_PEDIT_KEY_EX_MAX - 1)
/* TCA_PEDIT_KEY_EX_HDR_TYPE_NETWROK is a special case for legacy users. It
* means no specific header type - offset is relative to the network layer
*/
enum pedit_header_type {
TCA_PEDIT_KEY_EX_HDR_TYPE_NETWORK = 0,
TCA_PEDIT_KEY_EX_HDR_TYPE_ETH = 1,
TCA_PEDIT_KEY_EX_HDR_TYPE_IP4 = 2,
TCA_PEDIT_KEY_EX_HDR_TYPE_IP6 = 3,
TCA_PEDIT_KEY_EX_HDR_TYPE_TCP = 4,
TCA_PEDIT_KEY_EX_HDR_TYPE_UDP = 5,
__PEDIT_HDR_TYPE_MAX,
};
net/act_pedit: Support using offset relative to the conventional network headers Extend pedit to enable the user setting offset relative to network headers. This change would enable to work with more complex header schemes (vs the simple IPv4 case) where setting a fixed offset relative to the network header is not enough. After this patch, the action has information about the exact header type and field inside this header. This information could be used later on for hardware offloading of pedit. Backward compatibility was being kept: 1. Old kernel <-> new userspace 2. New kernel <-> old userspace 3. add rule using new userspace <-> dump using old userspace 4. add rule using old userspace <-> dump using new userspace When using the extended api, new netlink attributes are being used. This way, operation will fail in (1) and (3) - and no malformed rule be added or dumped. Of course, new user space that doesn't need the new functionality can use the old netlink attributes and operation will succeed. Since action can support both api's, (2) should work, and it is easy to write the new user space to have (4) work. The action is having a strict check that only header types and commands it can handle are accepted. This way future additions will be much easier. Usage example: $ tc filter add dev enp0s9 protocol ip parent ffff: \ flower \ ip_proto tcp \ dst_port 80 \ action pedit munge tcp dport set 8080 pipe \ action mirred egress redirect dev veth0 Will forward tcp port whose original dest port is 80, while modifying the destination port to 8080. Signed-off-by: Amir Vadai <amir@vadai.me> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07 15:56:07 +08:00
#define TCA_PEDIT_HDR_TYPE_MAX (__PEDIT_HDR_TYPE_MAX - 1)
enum pedit_cmd {
TCA_PEDIT_KEY_EX_CMD_SET = 0,
TCA_PEDIT_KEY_EX_CMD_ADD = 1,
__PEDIT_CMD_MAX,
};
#define TCA_PEDIT_CMD_MAX (__PEDIT_CMD_MAX - 1)
struct tc_pedit_key {
__u32 mask; /* AND */
__u32 val; /*XOR */
__u32 off; /*offset */
__u32 at;
__u32 offmask;
__u32 shift;
};
struct tc_pedit_sel {
tc_gen;
unsigned char nkeys;
unsigned char flags;
struct tc_pedit_key keys[0];
};
#define tc_pedit tc_pedit_sel
#endif