UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/mach-s3c64xx/Makefile

65 lines
1.8 KiB
Makefile
Raw Normal View History

ARM: S3C64XX: Merge mach-s3c6400 and mach-s3c6410 As per discussions with Russell King on linux-arm-kernel, it appears that both mach-s3c6400 and mach-s3c6410 are so close together that they should simply be merged into mach-s3c64xx. Note, this patch does not eliminate any of the bits that are still common, it is simply a move of the two directories together, any further common code will be eliminated or moved in further patches. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26 09:11:04 +08:00
# arch/arm/mach-s3c64xx/Makefile
[ARM] S3C64XX: Initial arch directory Add the initial PLAT_S3C64XX support files and directory structure. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21 21:06:39 +08:00
#
# Copyright 2008 Openmoko, Inc.
# Copyright 2008 Simtec Electronics
#
# Licensed under GPLv2
ARM: s3c64xx: multiplatform support After all preparation work is done, we can finally move the Kconfig option for s3c64xx into ARCH_MULTIPLATFORM. This implies allowing SAMSUNG_ATAGS for multiplatform again, but now disallowing the ADC driver below it, as that still has dependencies on header files. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-07 20:25:15 +08:00
ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
asflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include -I$(srctree)/arch/arm/plat-samsung/include
ARM: s3c64xx: allow building without board support Most of the code for the s3c64xx platform is only used when booting with ATAGS based board files, but not when using device-tree. This tries to identify all the s3c64xx specific code that is unneeded when CONFIG_ATAGS is not set, so we can build a smaller DT-only kernel if configured that way. All board support is still left intact but now depends on the CONFIG_ATAGS symbol that users may intentionally disable. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-28 04:44:40 +08:00
# PM
[ARM] S3C64XX: Common init code for S3C6400 and S3C6410 Add the common initialisation code for both the S3C6400 and S3C6410, the UART registration. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21 21:06:58 +08:00
ARM: s3c64xx: allow building without board support Most of the code for the s3c64xx platform is only used when booting with ATAGS based board files, but not when using device-tree. This tries to identify all the s3c64xx specific code that is unneeded when CONFIG_ATAGS is not set, so we can build a smaller DT-only kernel if configured that way. All board support is still left intact but now depends on the CONFIG_ATAGS symbol that users may intentionally disable. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-28 04:44:40 +08:00
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM_SLEEP) += sleep.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
ARM: 7245/1: S3C64XX: introduce arch/arm/mach-s3c64xx/common.[ch] This patch introduces common.[ch] which are used only in the arch/arm/mach-s3c64xx/ directory. The common.c file merges the cpu.c, irq.c and irq-eint.c which are used commonly on S3C64XX SoCs and the common.h file replaces with plat/s3c6400.h and plat/s3c6410.h files. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23 06:27:42 +08:00
ARM: s3c64xx: allow building without board support Most of the code for the s3c64xx platform is only used when booting with ATAGS based board files, but not when using device-tree. This tries to identify all the s3c64xx specific code that is unneeded when CONFIG_ATAGS is not set, so we can build a smaller DT-only kernel if configured that way. All board support is still left intact but now depends on the CONFIG_ATAGS symbol that users may intentionally disable. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-28 04:44:40 +08:00
ifdef CONFIG_SAMSUNG_ATAGS
[ARM] S3C64XX: Common init code for S3C6400 and S3C6410 Add the common initialisation code for both the S3C6400 and S3C6410, the UART registration. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-10-21 21:06:58 +08:00
ARM: s3c64xx: allow building without board support Most of the code for the s3c64xx platform is only used when booting with ATAGS based board files, but not when using device-tree. This tries to identify all the s3c64xx specific code that is unneeded when CONFIG_ATAGS is not set, so we can build a smaller DT-only kernel if configured that way. All board support is still left intact but now depends on the CONFIG_ATAGS symbol that users may intentionally disable. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-28 04:44:40 +08:00
obj-$(CONFIG_PM_SLEEP) += irq-pm.o
[ARM] S3C64XX: Add i2c device setup for I2C device 0 Add the necessary device initialisation information for I2C device 0. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-01 00:14:51 +08:00
ARM: s3c64xx: allow building without board support Most of the code for the s3c64xx platform is only used when booting with ATAGS based board files, but not when using device-tree. This tries to identify all the s3c64xx specific code that is unneeded when CONFIG_ATAGS is not set, so we can build a smaller DT-only kernel if configured that way. All board support is still left intact but now depends on the CONFIG_ATAGS symbol that users may intentionally disable. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-28 04:44:40 +08:00
# Core
ARM: 7245/1: S3C64XX: introduce arch/arm/mach-s3c64xx/common.[ch] This patch introduces common.[ch] which are used only in the arch/arm/mach-s3c64xx/ directory. The common.c file merges the cpu.c, irq.c and irq-eint.c which are used commonly on S3C64XX SoCs and the common.h file replaces with plat/s3c6400.h and plat/s3c6410.h files. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23 06:27:42 +08:00
ARM: s3c64xx: allow building without board support Most of the code for the s3c64xx platform is only used when booting with ATAGS based board files, but not when using device-tree. This tries to identify all the s3c64xx specific code that is unneeded when CONFIG_ATAGS is not set, so we can build a smaller DT-only kernel if configured that way. All board support is still left intact but now depends on the CONFIG_ATAGS symbol that users may intentionally disable. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-28 04:44:40 +08:00
obj-y += common.o
obj-$(CONFIG_CPU_S3C6400) += s3c6400.o
obj-$(CONFIG_CPU_S3C6410) += s3c6410.o
[ARM] S3C64XX: Initial support for PM (suspend to RAM) Add the initial support for the S3C64XX based systems to use suspend-to-RAM to sleep. Includes basic debugging for use with the SMDK6410 usign the LEDs on the baseboard. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-11 02:19:35 +08:00
[ARM] S3C64XX: DMA support Add support for the DMA blocks in the S3C64XX series of CPUS, which are based on the ARM PL080 PrimeCell system. Unfortunately, these DMA controllers diverge from the PL080 design by adding another DMA controller register and configuration for OneNAND. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-11 07:57:26 +08:00
# DMA support
ARM: s3c64xx: Add support for DMA using generic amba-pl08x driver This patch adds all required platform-specific data and initialization code to support the generic amba-pl08x driver on S3C64xx SoCs. Also some compatibility definitions are added to make the transition from legacy API to DMA engine easier. The biggest hack here is passing const char * pointers through DMA resource, casted to unsigned long, but this is how Samsung DMA wrappers (used to support both s3c-dma and DMA engine in drivers) are designed. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-10-17 03:10:54 +08:00
obj-$(CONFIG_S3C64XX_PL080) += pl080.o
[ARM] S3C64XX: DMA support Add support for the DMA blocks in the S3C64XX series of CPUS, which are based on the ARM PL080 PrimeCell system. Unfortunately, these DMA controllers diverge from the PL080 design by adding another DMA controller register and configuration for OneNAND. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-03-11 07:57:26 +08:00
ARM: 7245/1: S3C64XX: introduce arch/arm/mach-s3c64xx/common.[ch] This patch introduces common.[ch] which are used only in the arch/arm/mach-s3c64xx/ directory. The common.c file merges the cpu.c, irq.c and irq-eint.c which are used commonly on S3C64XX SoCs and the common.h file replaces with plat/s3c6400.h and plat/s3c6410.h files. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23 06:27:42 +08:00
# Device support
[ARM] S3C64XX: Add i2c device setup for I2C device 0 Add the necessary device initialisation information for I2C device 0. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2008-11-01 00:14:51 +08:00
ARM: 7245/1: S3C64XX: introduce arch/arm/mach-s3c64xx/common.[ch] This patch introduces common.[ch] which are used only in the arch/arm/mach-s3c64xx/ directory. The common.c file merges the cpu.c, irq.c and irq-eint.c which are used commonly on S3C64XX SoCs and the common.h file replaces with plat/s3c6400.h and plat/s3c6410.h files. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23 06:27:42 +08:00
obj-y += dev-uart.o
obj-y += dev-audio.o
ARM: S3C64XX: Make audio device code built unconditionally Making the code depend on CONFIG_SND_S3C24XX_SOC means that if the ASoC code is build modularily, the boards will fail to link due to the device code also being built as a module. As per Mark Brown's suggestions, just compile this always as it is expected many machines will have audio. Also move the obj-y line out of the device setup area into a new area just for devices. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-29 12:03:34 +08:00
ARM: 7245/1: S3C64XX: introduce arch/arm/mach-s3c64xx/common.[ch] This patch introduces common.[ch] which are used only in the arch/arm/mach-s3c64xx/ directory. The common.c file merges the cpu.c, irq.c and irq-eint.c which are used commonly on S3C64XX SoCs and the common.h file replaces with plat/s3c6400.h and plat/s3c6410.h files. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23 06:27:42 +08:00
# Device setup
ARM: S3C64XX: Move IRQ support into mach-s3c64xx Move IRQ support to mach-s3c64xx as it is unlikely to be re-used outside this machine. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26 10:07:23 +08:00
ARM: 7245/1: S3C64XX: introduce arch/arm/mach-s3c64xx/common.[ch] This patch introduces common.[ch] which are used only in the arch/arm/mach-s3c64xx/ directory. The common.c file merges the cpu.c, irq.c and irq-eint.c which are used commonly on S3C64XX SoCs and the common.h file replaces with plat/s3c6400.h and plat/s3c6410.h files. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23 06:27:42 +08:00
obj-$(CONFIG_S3C64XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o
obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_S3C64XX_SETUP_IDE) += setup-ide.o
obj-$(CONFIG_S3C64XX_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_S3C64XX_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
Merge branch 'samsung/dt' into samsung/cleanup Conflicts: arch/arm/mach-s3c64xx/Makefile arch/arm/mach-s5pc100/Makefile arch/arm/mach-s5pv210/Makefile Pull in previously resolved conflicts: The Makefiles were reorganized in the "rmk/restart" series and modified in the "samsung/cleanup series". This also pulls in the other conflict resolutions from the restart series against the samsung/dt series. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-01-10 00:01:00 +08:00
obj-$(CONFIG_S3C64XX_SETUP_SPI) += setup-spi.o
ARM: S3C64XX: Add usb otg phy control This patch supports to control usb otg phy of S3C64XX. Currently, the driver for usb otg controls usb otg phy but it can be removed by this patch. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> [Rebased on the newest git/kgene/linux-samsung #for-next] Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Acked-by: Mark Brown<broonie@opensource.wolfsonmicro.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2012-03-07 20:23:47 +08:00
obj-$(CONFIG_S3C64XX_SETUP_USB_PHY) += setup-usb-phy.o
ARM: S3C64XX: Move IRQ support into mach-s3c64xx Move IRQ support to mach-s3c64xx as it is unlikely to be re-used outside this machine. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26 10:07:23 +08:00
ARM: SAMSUNG: make local dev-backlight in mach-s3c64xx This patch moves dev-backlight from plat-samsung into mach-s3c64xx because it is used for only s3c64xx no other platforms. Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-07-30 00:48:17 +08:00
obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o
ARM: S3C64XX: Merge mach-s3c6400 and mach-s3c6410 As per discussions with Russell King on linux-arm-kernel, it appears that both mach-s3c6400 and mach-s3c6410 are so close together that they should simply be merged into mach-s3c64xx. Note, this patch does not eliminate any of the bits that are still common, it is simply a move of the two directories together, any further common code will be eliminated or moved in further patches. Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-26 09:11:04 +08:00
# Machine support
ARM: 7245/1: S3C64XX: introduce arch/arm/mach-s3c64xx/common.[ch] This patch introduces common.[ch] which are used only in the arch/arm/mach-s3c64xx/ directory. The common.c file merges the cpu.c, irq.c and irq-eint.c which are used commonly on S3C64XX SoCs and the common.h file replaces with plat/s3c6400.h and plat/s3c6410.h files. Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-12-23 06:27:42 +08:00
obj-$(CONFIG_MACH_ANW6410) += mach-anw6410.o
obj-$(CONFIG_MACH_HMT) += mach-hmt.o
obj-$(CONFIG_MACH_MINI6410) += mach-mini6410.o
obj-$(CONFIG_MACH_NCP) += mach-ncp.o
obj-$(CONFIG_MACH_REAL6410) += mach-real6410.o
obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o
obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o
obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o
obj-$(CONFIG_MACH_SMDK6400) += mach-smdk6400.o
obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o
obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o
ARM: s3c64xx: allow building without board support Most of the code for the s3c64xx platform is only used when booting with ATAGS based board files, but not when using device-tree. This tries to identify all the s3c64xx specific code that is unneeded when CONFIG_ATAGS is not set, so we can build a smaller DT-only kernel if configured that way. All board support is still left intact but now depends on the CONFIG_ATAGS symbol that users may intentionally disable. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2015-02-28 04:44:40 +08:00
endif
ARM: S3C64XX: Add board file for boot using Device Tree This patch adds board file that will be used to boot S3C64xx-based boards using Device Tree. Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-08-26 01:37:51 +08:00
obj-$(CONFIG_MACH_S3C64XX_DT) += mach-s3c64xx-dt.o