OpenCloudOS-Kernel/drivers/scsi/scsi_debug.c

5341 lines
156 KiB
C
Raw Normal View History

/*
* vvvvvvvvvvvvvvvvvvvvvvv Original vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv
* Copyright (C) 1992 Eric Youngdale
* Simulate a host adapter with 2 disks attached. Do a lot of checking
* to make sure that we are not getting blocks mixed up, and PANIC if
* anything out of the ordinary is seen.
* ^^^^^^^^^^^^^^^^^^^^^^^ Original ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
*
* This version is more generic, simulating a variable number of disk
* (or disk like devices) sharing a common amount of RAM. To be more
* realistic, the simulated devices have the transport attributes of
* SAS disks.
*
*
* For documentation see http://sg.danny.cz/sg/sdebug26.html
*
* D. Gilbert (dpg) work for Magneto-Optical device test [20010421]
* dpg: work for devfs large number of disks [20010809]
* forked for lk 2.5 series [20011216, 20020101]
* use vmalloc() more inquiry+mode_sense [20020302]
* add timers for delayed responses [20020721]
* Patrick Mansfield <patmans@us.ibm.com> max_luns+scsi_level [20021031]
* Mike Anderson <andmike@us.ibm.com> sysfs work [20021118]
* dpg: change style of boot options to "scsi_debug.num_tgts=2" and
* module options to "modprobe scsi_debug num_tgts=2" [20021221]
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/timer.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/genhd.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/vmalloc.h>
#include <linux/moduleparam.h>
#include <linux/scatterlist.h>
#include <linux/blkdev.h>
#include <linux/crc-t10dif.h>
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/atomic.h>
#include <linux/hrtimer.h>
#include <net/checksum.h>
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsicam.h>
#include <scsi/scsi_eh.h>
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_dbg.h>
#include "sd.h"
#include "scsi_logging.h"
#define SCSI_DEBUG_VERSION "1.85"
static const char *scsi_debug_version_date = "20141022";
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
#define MY_NAME "scsi_debug"
/* Additional Sense Code (ASC) */
#define NO_ADDITIONAL_SENSE 0x0
#define LOGICAL_UNIT_NOT_READY 0x4
#define LOGICAL_UNIT_COMMUNICATION_FAILURE 0x8
#define UNRECOVERED_READ_ERR 0x11
#define PARAMETER_LIST_LENGTH_ERR 0x1a
#define INVALID_OPCODE 0x20
#define LBA_OUT_OF_RANGE 0x21
#define INVALID_FIELD_IN_CDB 0x24
#define INVALID_FIELD_IN_PARAM_LIST 0x26
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
#define UA_RESET_ASC 0x29
#define UA_CHANGED_ASC 0x2a
#define INSUFF_RES_ASC 0x55
#define INSUFF_RES_ASCQ 0x3
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
#define POWER_ON_RESET_ASCQ 0x0
#define BUS_RESET_ASCQ 0x2 /* scsi bus reset occurred */
#define MODE_CHANGED_ASCQ 0x1 /* mode parameters changed */
#define CAPACITY_CHANGED_ASCQ 0x9
#define SAVING_PARAMS_UNSUP 0x39
#define TRANSPORT_PROBLEM 0x4b
#define THRESHOLD_EXCEEDED 0x5d
#define LOW_POWER_COND_ON 0x5e
#define MISCOMPARE_VERIFY_ASC 0x1d
/* Additional Sense Code Qualifier (ASCQ) */
#define ACK_NAK_TO 0x3
/* Default values for driver parameters */
#define DEF_NUM_HOST 1
#define DEF_NUM_TGTS 1
#define DEF_MAX_LUNS 1
/* With these defaults, this driver will make 1 host with 1 target
* (id 0) containing 1 logical unit (lun 0). That is 1 device.
*/
#define DEF_ATO 1
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
#define DEF_DELAY 1 /* if > 0 unit is a jiffy */
#define DEF_DEV_SIZE_MB 8
#define DEF_DIF 0
#define DEF_DIX 0
#define DEF_D_SENSE 0
#define DEF_EVERY_NTH 0
#define DEF_FAKE_RW 0
#define DEF_GUARD 0
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
#define DEF_HOST_LOCK 0
#define DEF_LBPU 0
#define DEF_LBPWS 0
#define DEF_LBPWS10 0
#define DEF_LBPRZ 1
#define DEF_LOWEST_ALIGNED 0
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
#define DEF_NDELAY 0 /* if > 0 unit is a nanosecond */
#define DEF_NO_LUN_0 0
#define DEF_NUM_PARTS 0
#define DEF_OPTS 0
#define DEF_OPT_BLKS 64
#define DEF_PHYSBLK_EXP 0
#define DEF_PTYPE 0
#define DEF_REMOVABLE false
#define DEF_SCSI_LEVEL 6 /* INQUIRY, byte2 [6->SPC-4] */
#define DEF_SECTOR_SIZE 512
#define DEF_UNMAP_ALIGNMENT 0
#define DEF_UNMAP_GRANULARITY 1
#define DEF_UNMAP_MAX_BLOCKS 0xFFFFFFFF
#define DEF_UNMAP_MAX_DESC 256
#define DEF_VIRTUAL_GB 0
#define DEF_VPD_USE_HOSTNO 1
#define DEF_WRITESAME_LENGTH 0xFFFF
#define DEF_STRICT 0
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
#define DELAY_OVERRIDDEN -9999
/* bit mask values for scsi_debug_opts */
#define SCSI_DEBUG_OPT_NOISE 1
#define SCSI_DEBUG_OPT_MEDIUM_ERR 2
#define SCSI_DEBUG_OPT_TIMEOUT 4
#define SCSI_DEBUG_OPT_RECOVERED_ERR 8
#define SCSI_DEBUG_OPT_TRANSPORT_ERR 16
#define SCSI_DEBUG_OPT_DIF_ERR 32
#define SCSI_DEBUG_OPT_DIX_ERR 64
#define SCSI_DEBUG_OPT_MAC_TIMEOUT 128
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
#define SCSI_DEBUG_OPT_SHORT_TRANSFER 0x100
#define SCSI_DEBUG_OPT_Q_NOISE 0x200
#define SCSI_DEBUG_OPT_ALL_TSF 0x400
#define SCSI_DEBUG_OPT_RARE_TSF 0x800
#define SCSI_DEBUG_OPT_N_WCE 0x1000
#define SCSI_DEBUG_OPT_RESET_NOISE 0x2000
#define SCSI_DEBUG_OPT_NO_CDB_NOISE 0x4000
#define SCSI_DEBUG_OPT_ALL_NOISE (0x1 | 0x200 | 0x2000)
/* When "every_nth" > 0 then modulo "every_nth" commands:
* - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
* - a RECOVERED_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
* - a TRANSPORT_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
*
* When "every_nth" < 0 then after "- every_nth" commands:
* - a no response is simulated if SCSI_DEBUG_OPT_TIMEOUT is set
* - a RECOVERED_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_RECOVERED_ERR is set.
* - a TRANSPORT_ERROR is simulated on successful read and write
* commands if SCSI_DEBUG_OPT_TRANSPORT_ERR is set.
* This will continue until some other action occurs (e.g. the user
* writing a new value (other than -1 or 1) to every_nth via sysfs).
*/
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* As indicated in SAM-5 and SPC-4 Unit Attentions (UAs)are returned in
* priority order. In the subset implemented here lower numbers have higher
* priority. The UA numbers should be a sequence starting from 0 with
* SDEBUG_NUM_UAS being 1 higher than the highest numbered UA. */
#define SDEBUG_UA_POR 0 /* Power on, reset, or bus device reset */
#define SDEBUG_UA_BUS_RESET 1
#define SDEBUG_UA_MODE_CHANGED 2
#define SDEBUG_UA_CAPACITY_CHANGED 3
#define SDEBUG_NUM_UAS 4
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* for check_readiness() */
#define UAS_ONLY 1 /* check for UAs only */
#define UAS_TUR 0 /* if no UAs then check if media access possible */
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* when 1==SCSI_DEBUG_OPT_MEDIUM_ERR, a medium error is simulated at this
* sector on read commands: */
#define OPT_MEDIUM_ERR_ADDR 0x1234 /* that's sector 4660 in decimal */
#define OPT_MEDIUM_ERR_NUM 10 /* number of consecutive medium errs */
/* If REPORT LUNS has luns >= 256 it can choose "flat space" (value 1)
* or "peripheral device" addressing (value 0) */
#define SAM2_LUN_ADDRESS_METHOD 0
#define SAM2_WLUN_REPORT_LUNS 0xc101
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* SCSI_DEBUG_CANQUEUE is the maximum number of commands that can be queued
* (for response) at one time. Can be reduced by max_queue option. Command
* responses are not queued when delay=0 and ndelay=0. The per-device
* DEF_CMD_PER_LUN can be changed via sysfs:
* /sys/class/scsi_device/<h:c:t:l>/device/queue_depth but cannot exceed
* SCSI_DEBUG_CANQUEUE. */
#define SCSI_DEBUG_CANQUEUE_WORDS 9 /* a WORD is bits in a long */
#define SCSI_DEBUG_CANQUEUE (SCSI_DEBUG_CANQUEUE_WORDS * BITS_PER_LONG)
#define DEF_CMD_PER_LUN 255
#if DEF_CMD_PER_LUN > SCSI_DEBUG_CANQUEUE
#warning "Expect DEF_CMD_PER_LUN <= SCSI_DEBUG_CANQUEUE"
#endif
/* SCSI opcodes (first byte of cdb) mapped onto these indexes */
enum sdeb_opcode_index {
SDEB_I_INVALID_OPCODE = 0,
SDEB_I_INQUIRY = 1,
SDEB_I_REPORT_LUNS = 2,
SDEB_I_REQUEST_SENSE = 3,
SDEB_I_TEST_UNIT_READY = 4,
SDEB_I_MODE_SENSE = 5, /* 6, 10 */
SDEB_I_MODE_SELECT = 6, /* 6, 10 */
SDEB_I_LOG_SENSE = 7,
SDEB_I_READ_CAPACITY = 8, /* 10; 16 is in SA_IN(16) */
SDEB_I_READ = 9, /* 6, 10, 12, 16 */
SDEB_I_WRITE = 10, /* 6, 10, 12, 16 */
SDEB_I_START_STOP = 11,
SDEB_I_SERV_ACT_IN = 12, /* 12, 16 */
SDEB_I_SERV_ACT_OUT = 13, /* 12, 16 */
SDEB_I_MAINT_IN = 14,
SDEB_I_MAINT_OUT = 15,
SDEB_I_VERIFY = 16, /* 10 only */
SDEB_I_VARIABLE_LEN = 17,
SDEB_I_RESERVE = 18, /* 6, 10 */
SDEB_I_RELEASE = 19, /* 6, 10 */
SDEB_I_ALLOW_REMOVAL = 20, /* PREVENT ALLOW MEDIUM REMOVAL */
SDEB_I_REZERO_UNIT = 21, /* REWIND in SSC */
SDEB_I_ATA_PT = 22, /* 12, 16 */
SDEB_I_SEND_DIAG = 23,
SDEB_I_UNMAP = 24,
SDEB_I_XDWRITEREAD = 25, /* 10 only */
SDEB_I_WRITE_BUFFER = 26,
SDEB_I_WRITE_SAME = 27, /* 10, 16 */
SDEB_I_SYNC_CACHE = 28, /* 10 only */
SDEB_I_COMP_WRITE = 29,
SDEB_I_LAST_ELEMENT = 30, /* keep this last */
};
static const unsigned char opcode_ind_arr[256] = {
/* 0x0; 0x0->0x1f: 6 byte cdbs */
SDEB_I_TEST_UNIT_READY, SDEB_I_REZERO_UNIT, 0, SDEB_I_REQUEST_SENSE,
0, 0, 0, 0,
SDEB_I_READ, 0, SDEB_I_WRITE, 0, 0, 0, 0, 0,
0, 0, SDEB_I_INQUIRY, 0, 0, SDEB_I_MODE_SELECT, SDEB_I_RESERVE,
SDEB_I_RELEASE,
0, 0, SDEB_I_MODE_SENSE, SDEB_I_START_STOP, 0, SDEB_I_SEND_DIAG,
SDEB_I_ALLOW_REMOVAL, 0,
/* 0x20; 0x20->0x3f: 10 byte cdbs */
0, 0, 0, 0, 0, SDEB_I_READ_CAPACITY, 0, 0,
SDEB_I_READ, 0, SDEB_I_WRITE, 0, 0, 0, 0, SDEB_I_VERIFY,
0, 0, 0, 0, 0, SDEB_I_SYNC_CACHE, 0, 0,
0, 0, 0, SDEB_I_WRITE_BUFFER, 0, 0, 0, 0,
/* 0x40; 0x40->0x5f: 10 byte cdbs */
0, SDEB_I_WRITE_SAME, SDEB_I_UNMAP, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, SDEB_I_LOG_SENSE, 0, 0,
0, 0, 0, SDEB_I_XDWRITEREAD, 0, SDEB_I_MODE_SELECT, SDEB_I_RESERVE,
SDEB_I_RELEASE,
0, 0, SDEB_I_MODE_SENSE, 0, 0, 0, 0, 0,
/* 0x60; 0x60->0x7d are reserved */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, SDEB_I_VARIABLE_LEN,
/* 0x80; 0x80->0x9f: 16 byte cdbs */
0, 0, 0, 0, 0, SDEB_I_ATA_PT, 0, 0,
SDEB_I_READ, SDEB_I_COMP_WRITE, SDEB_I_WRITE, 0, 0, 0, 0, 0,
0, 0, 0, SDEB_I_WRITE_SAME, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, SDEB_I_SERV_ACT_IN, SDEB_I_SERV_ACT_OUT,
/* 0xa0; 0xa0->0xbf: 12 byte cdbs */
SDEB_I_REPORT_LUNS, SDEB_I_ATA_PT, 0, SDEB_I_MAINT_IN,
SDEB_I_MAINT_OUT, 0, 0, 0,
SDEB_I_READ, SDEB_I_SERV_ACT_OUT, SDEB_I_WRITE, SDEB_I_SERV_ACT_IN,
0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
/* 0xc0; 0xc0->0xff: vendor specific */
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
};
#define F_D_IN 1
#define F_D_OUT 2
#define F_D_OUT_MAYBE 4 /* WRITE SAME, NDOB bit */
#define F_D_UNKN 8
#define F_RL_WLUN_OK 0x10
#define F_SKIP_UA 0x20
#define F_DELAY_OVERR 0x40
#define F_SA_LOW 0x80 /* cdb byte 1, bits 4 to 0 */
#define F_SA_HIGH 0x100 /* as used by variable length cdbs */
#define F_INV_OP 0x200
#define F_FAKE_RW 0x400
#define F_M_ACCESS 0x800 /* media access */
#define FF_RESPOND (F_RL_WLUN_OK | F_SKIP_UA | F_DELAY_OVERR)
#define FF_DIRECT_IO (F_M_ACCESS | F_FAKE_RW)
#define FF_SA (F_SA_HIGH | F_SA_LOW)
struct sdebug_dev_info;
static int resp_inquiry(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_report_luns(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_requests(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_mode_sense(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_mode_select(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_log_sense(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_readcap(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_read_dt0(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_write_dt0(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_start_stop(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_readcap16(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_get_lba_status(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_report_tgtpgs(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_unmap(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_rsup_opcodes(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_rsup_tmfs(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_write_same_10(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_write_same_16(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_xdwriteread_10(struct scsi_cmnd *, struct sdebug_dev_info *);
static int resp_comp_write(struct scsi_cmnd *, struct sdebug_dev_info *);
struct opcode_info_t {
u8 num_attached; /* 0 if this is it (i.e. a leaf); use 0xff
* for terminating element */
u8 opcode; /* if num_attached > 0, preferred */
u16 sa; /* service action */
u32 flags; /* OR-ed set of SDEB_F_* */
int (*pfp)(struct scsi_cmnd *, struct sdebug_dev_info *);
const struct opcode_info_t *arrp; /* num_attached elements or NULL */
u8 len_mask[16]; /* len=len_mask[0], then mask for cdb[1]... */
/* ignore cdb bytes after position 15 */
};
static const struct opcode_info_t msense_iarr[1] = {
{0, 0x1a, 0, F_D_IN, NULL, NULL,
{6, 0xe8, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
};
static const struct opcode_info_t mselect_iarr[1] = {
{0, 0x15, 0, F_D_OUT, NULL, NULL,
{6, 0xf1, 0, 0, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
};
static const struct opcode_info_t read_iarr[3] = {
{0, 0x28, 0, F_D_IN | FF_DIRECT_IO, resp_read_dt0, NULL,/* READ(10) */
{10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7, 0, 0,
0, 0, 0, 0} },
{0, 0x8, 0, F_D_IN | FF_DIRECT_IO, resp_read_dt0, NULL, /* READ(6) */
{6, 0xff, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0xa8, 0, F_D_IN | FF_DIRECT_IO, resp_read_dt0, NULL,/* READ(12) */
{12, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x9f,
0xc7, 0, 0, 0, 0} },
};
static const struct opcode_info_t write_iarr[3] = {
{0, 0x2a, 0, F_D_OUT | FF_DIRECT_IO, resp_write_dt0, NULL, /* 10 */
{10, 0xfb, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7, 0, 0,
0, 0, 0, 0} },
{0, 0xa, 0, F_D_OUT | FF_DIRECT_IO, resp_write_dt0, NULL, /* 6 */
{6, 0xff, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0xaa, 0, F_D_OUT | FF_DIRECT_IO, resp_write_dt0, NULL, /* 12 */
{12, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x9f,
0xc7, 0, 0, 0, 0} },
};
static const struct opcode_info_t sa_in_iarr[1] = {
{0, 0x9e, 0x12, F_SA_LOW | F_D_IN, resp_get_lba_status, NULL,
{16, 0x12, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0, 0xc7} },
};
static const struct opcode_info_t vl_iarr[1] = { /* VARIABLE LENGTH */
{0, 0x7f, 0xb, F_SA_HIGH | F_D_OUT | FF_DIRECT_IO, resp_write_dt0,
NULL, {32, 0xc7, 0, 0, 0, 0, 0x1f, 0x18, 0x0, 0xb, 0xfa,
0, 0xff, 0xff, 0xff, 0xff} }, /* WRITE(32) */
};
static const struct opcode_info_t maint_in_iarr[2] = {
{0, 0xa3, 0xc, F_SA_LOW | F_D_IN, resp_rsup_opcodes, NULL,
{12, 0xc, 0x87, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0,
0xc7, 0, 0, 0, 0} },
{0, 0xa3, 0xd, F_SA_LOW | F_D_IN, resp_rsup_tmfs, NULL,
{12, 0xd, 0x80, 0, 0, 0, 0xff, 0xff, 0xff, 0xff, 0, 0xc7, 0, 0,
0, 0} },
};
static const struct opcode_info_t write_same_iarr[1] = {
{0, 0x93, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, resp_write_same_16, NULL,
{16, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0x1f, 0xc7} },
};
static const struct opcode_info_t reserve_iarr[1] = {
{0, 0x16, 0, F_D_OUT, NULL, NULL, /* RESERVE(6) */
{6, 0x1f, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
};
static const struct opcode_info_t release_iarr[1] = {
{0, 0x17, 0, F_D_OUT, NULL, NULL, /* RELEASE(6) */
{6, 0x1f, 0xff, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
};
/* This array is accessed via SDEB_I_* values. Make sure all are mapped,
* plus the terminating elements for logic that scans this table such as
* REPORT SUPPORTED OPERATION CODES. */
static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
/* 0 */
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL,
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0x12, 0, FF_RESPOND | F_D_IN, resp_inquiry, NULL,
{6, 0xe3, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0xa0, 0, FF_RESPOND | F_D_IN, resp_report_luns, NULL,
{12, 0xe3, 0xff, 0, 0, 0, 0xff, 0xff, 0xff, 0xff, 0, 0xc7, 0, 0,
0, 0} },
{0, 0x3, 0, FF_RESPOND | F_D_IN, resp_requests, NULL,
{6, 0xe1, 0, 0, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0x0, 0, F_M_ACCESS | F_RL_WLUN_OK, NULL, NULL,/* TEST UNIT READY */
{6, 0, 0, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{1, 0x5a, 0, F_D_IN, resp_mode_sense, msense_iarr,
{10, 0xf8, 0xff, 0xff, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0,
0} },
{1, 0x55, 0, F_D_OUT, resp_mode_select, mselect_iarr,
{10, 0xf1, 0, 0, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0} },
{0, 0x4d, 0, F_D_IN, resp_log_sense, NULL,
{10, 0xe3, 0xff, 0xff, 0, 0xff, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0,
0, 0, 0} },
{0, 0x25, 0, F_D_IN, resp_readcap, NULL,
{10, 0xe1, 0xff, 0xff, 0xff, 0xff, 0, 0, 0x1, 0xc7, 0, 0, 0, 0,
0, 0} },
{3, 0x88, 0, F_D_IN | FF_DIRECT_IO, resp_read_dt0, read_iarr,
{16, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0x9f, 0xc7} }, /* READ(16) */
/* 10 */
{3, 0x8a, 0, F_D_OUT | FF_DIRECT_IO, resp_write_dt0, write_iarr,
{16, 0xfa, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0x9f, 0xc7} }, /* WRITE(16) */
{0, 0x1b, 0, 0, resp_start_stop, NULL, /* START STOP UNIT */
{6, 0x1, 0, 0xf, 0xf7, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{1, 0x9e, 0x10, F_SA_LOW | F_D_IN, resp_readcap16, sa_in_iarr,
{16, 0x10, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
0xff, 0xff, 0xff, 0x1, 0xc7} }, /* READ CAPACITY(16) */
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* SA OUT */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{2, 0xa3, 0xa, F_SA_LOW | F_D_IN, resp_report_tgtpgs, maint_in_iarr,
{12, 0xea, 0, 0, 0, 0, 0xff, 0xff, 0xff, 0xff, 0, 0xc7, 0, 0, 0,
0} },
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* MAINT OUT */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* VERIFY */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{1, 0x7f, 0x9, F_SA_HIGH | F_D_IN | FF_DIRECT_IO, resp_read_dt0,
vl_iarr, {32, 0xc7, 0, 0, 0, 0, 0x1f, 0x18, 0x0, 0x9, 0xfe, 0,
0xff, 0xff, 0xff, 0xff} },/* VARIABLE LENGTH, READ(32) */
{1, 0x56, 0, F_D_OUT, NULL, reserve_iarr, /* RESERVE(10) */
{10, 0xff, 0xff, 0xff, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0,
0} },
{1, 0x57, 0, F_D_OUT, NULL, release_iarr, /* RELEASE(10) */
{10, 0x13, 0xff, 0xff, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0,
0} },
/* 20 */
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ALLOW REMOVAL */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0x1, 0, 0, resp_start_stop, NULL, /* REWIND ?? */
{6, 0x1, 0, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ATA_PT */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0x1d, F_D_OUT, 0, NULL, NULL, /* SEND DIAGNOSTIC */
{6, 0xf7, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{0, 0x42, 0, F_D_OUT | FF_DIRECT_IO, resp_unmap, NULL, /* UNMAP */
{10, 0x1, 0, 0, 0, 0, 0x1f, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0} },
{0, 0x53, 0, F_D_IN | F_D_OUT | FF_DIRECT_IO, resp_xdwriteread_10,
NULL, {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7,
0, 0, 0, 0, 0, 0} },
{0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* WRITE_BUFFER */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
{1, 0x41, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, resp_write_same_10,
write_same_iarr, {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff,
0xff, 0xc7, 0, 0, 0, 0, 0, 0} },
{0, 0x35, 0, F_DELAY_OVERR | FF_DIRECT_IO, NULL, NULL, /* SYNC_CACHE */
{10, 0x7, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7, 0, 0,
0, 0, 0, 0} },
{0, 0x89, 0, F_D_OUT | FF_DIRECT_IO, resp_comp_write, NULL,
{16, 0xf8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0, 0,
0, 0xff, 0x1f, 0xc7} }, /* COMPARE AND WRITE */
/* 30 */
{0xff, 0, 0, 0, NULL, NULL, /* terminating element */
{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
};
struct sdebug_scmd_extra_t {
bool inj_recovered;
bool inj_transport;
bool inj_dif;
bool inj_dix;
bool inj_short;
};
static int scsi_debug_add_host = DEF_NUM_HOST;
static int scsi_debug_ato = DEF_ATO;
static int scsi_debug_delay = DEF_DELAY;
static int scsi_debug_dev_size_mb = DEF_DEV_SIZE_MB;
static int scsi_debug_dif = DEF_DIF;
static int scsi_debug_dix = DEF_DIX;
static int scsi_debug_dsense = DEF_D_SENSE;
static int scsi_debug_every_nth = DEF_EVERY_NTH;
static int scsi_debug_fake_rw = DEF_FAKE_RW;
static unsigned int scsi_debug_guard = DEF_GUARD;
static int scsi_debug_lowest_aligned = DEF_LOWEST_ALIGNED;
static int scsi_debug_max_luns = DEF_MAX_LUNS;
static int scsi_debug_max_queue = SCSI_DEBUG_CANQUEUE;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static atomic_t retired_max_queue; /* if > 0 then was prior max_queue */
static int scsi_debug_ndelay = DEF_NDELAY;
static int scsi_debug_no_lun_0 = DEF_NO_LUN_0;
static int scsi_debug_no_uld = 0;
static int scsi_debug_num_parts = DEF_NUM_PARTS;
static int scsi_debug_num_tgts = DEF_NUM_TGTS; /* targets per host */
static int scsi_debug_opt_blks = DEF_OPT_BLKS;
static int scsi_debug_opts = DEF_OPTS;
static int scsi_debug_physblk_exp = DEF_PHYSBLK_EXP;
static int scsi_debug_ptype = DEF_PTYPE; /* SCSI peripheral type (0==disk) */
static int scsi_debug_scsi_level = DEF_SCSI_LEVEL;
static int scsi_debug_sector_size = DEF_SECTOR_SIZE;
static int scsi_debug_virtual_gb = DEF_VIRTUAL_GB;
static int scsi_debug_vpd_use_hostno = DEF_VPD_USE_HOSTNO;
static unsigned int scsi_debug_lbpu = DEF_LBPU;
static unsigned int scsi_debug_lbpws = DEF_LBPWS;
static unsigned int scsi_debug_lbpws10 = DEF_LBPWS10;
static unsigned int scsi_debug_lbprz = DEF_LBPRZ;
static unsigned int scsi_debug_unmap_alignment = DEF_UNMAP_ALIGNMENT;
static unsigned int scsi_debug_unmap_granularity = DEF_UNMAP_GRANULARITY;
static unsigned int scsi_debug_unmap_max_blocks = DEF_UNMAP_MAX_BLOCKS;
static unsigned int scsi_debug_unmap_max_desc = DEF_UNMAP_MAX_DESC;
static unsigned int scsi_debug_write_same_length = DEF_WRITESAME_LENGTH;
static bool scsi_debug_removable = DEF_REMOVABLE;
static bool scsi_debug_clustering;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static bool scsi_debug_host_lock = DEF_HOST_LOCK;
static bool scsi_debug_strict = DEF_STRICT;
static bool sdebug_any_injecting_opt;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static atomic_t sdebug_cmnd_count;
static atomic_t sdebug_completions;
static atomic_t sdebug_a_tsf; /* counter of 'almost' TSFs */
#define DEV_READONLY(TGT) (0)
static unsigned int sdebug_store_sectors;
static sector_t sdebug_capacity; /* in sectors */
/* old BIOS stuff, kernel may get rid of them but some mode sense pages
may still need them */
static int sdebug_heads; /* heads per disk */
static int sdebug_cylinders_per; /* cylinders per surface */
static int sdebug_sectors_per; /* sectors per cylinder */
#define SDEBUG_MAX_PARTS 4
#define SCSI_DEBUG_MAX_CMD_LEN 32
static unsigned int scsi_debug_lbp(void)
{
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
return ((0 == scsi_debug_fake_rw) &&
(scsi_debug_lbpu | scsi_debug_lbpws | scsi_debug_lbpws10));
}
struct sdebug_dev_info {
struct list_head dev_list;
unsigned int channel;
unsigned int target;
u64 lun;
struct sdebug_host_info *sdbg_host;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
unsigned long uas_bm[1];
atomic_t num_in_q;
char stopped; /* TODO: should be atomic */
bool used;
};
struct sdebug_host_info {
struct list_head host_list;
struct Scsi_Host *shost;
struct device dev;
struct list_head dev_info_list;
};
#define to_sdebug_host(d) \
container_of(d, struct sdebug_host_info, dev)
static LIST_HEAD(sdebug_host_list);
static DEFINE_SPINLOCK(sdebug_host_list_lock);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
struct sdebug_hrtimer { /* ... is derived from hrtimer */
struct hrtimer hrt; /* must be first element */
int qa_indx;
};
struct sdebug_queued_cmd {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* in_use flagged by a bit in queued_in_use_bm[] */
struct timer_list *cmnd_timerp;
struct tasklet_struct *tletp;
struct sdebug_hrtimer *sd_hrtp;
struct scsi_cmnd * a_cmnd;
};
static struct sdebug_queued_cmd queued_arr[SCSI_DEBUG_CANQUEUE];
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static unsigned long queued_in_use_bm[SCSI_DEBUG_CANQUEUE_WORDS];
static unsigned char * fake_storep; /* ramdisk storage */
static struct sd_dif_tuple *dif_storep; /* protection info */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
static void *map_storep; /* provisioning map */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
static unsigned long map_size;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static int num_aborts;
static int num_dev_resets;
static int num_target_resets;
static int num_bus_resets;
static int num_host_resets;
static int dix_writes;
static int dix_reads;
static int dif_errors;
static DEFINE_SPINLOCK(queued_arr_lock);
static DEFINE_RWLOCK(atomic_rw);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static char sdebug_proc_name[] = MY_NAME;
static const char *my_name = MY_NAME;
static struct bus_type pseudo_lld_bus;
static struct device_driver sdebug_driverfs_driver = {
.name = sdebug_proc_name,
.bus = &pseudo_lld_bus,
};
static const int check_condition_result =
(DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION;
static const int illegal_condition_result =
(DRIVER_SENSE << 24) | (DID_ABORT << 16) | SAM_STAT_CHECK_CONDITION;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static const int device_qfull_result =
(DID_OK << 16) | (COMMAND_COMPLETE << 8) | SAM_STAT_TASK_SET_FULL;
static unsigned char caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0,
0, 0, 0, 0};
static unsigned char ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
0, 0, 0x2, 0x4b};
static unsigned char iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0,
0, 0, 0x0, 0x0};
static void *fake_store(unsigned long long lba)
{
lba = do_div(lba, sdebug_store_sectors);
return fake_storep + lba * scsi_debug_sector_size;
}
static struct sd_dif_tuple *dif_store(sector_t sector)
{
sector = do_div(sector, sdebug_store_sectors);
return dif_storep + sector;
}
static int sdebug_add_adapter(void);
static void sdebug_remove_adapter(void);
static void sdebug_max_tgts_luns(void)
{
struct sdebug_host_info *sdbg_host;
struct Scsi_Host *hpnt;
spin_lock(&sdebug_host_list_lock);
list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
hpnt = sdbg_host->shost;
if ((hpnt->this_id >= 0) &&
(scsi_debug_num_tgts > hpnt->this_id))
hpnt->max_id = scsi_debug_num_tgts + 1;
else
hpnt->max_id = scsi_debug_num_tgts;
/* scsi_debug_max_luns; */
hpnt->max_lun = SAM2_WLUN_REPORT_LUNS;
}
spin_unlock(&sdebug_host_list_lock);
}
enum sdeb_cmd_data {SDEB_IN_DATA = 0, SDEB_IN_CDB = 1};
/* Set in_bit to -1 to indicate no bit position of invalid field */
static void
mk_sense_invalid_fld(struct scsi_cmnd *scp, enum sdeb_cmd_data c_d,
int in_byte, int in_bit)
{
unsigned char *sbuff;
u8 sks[4];
int sl, asc;
sbuff = scp->sense_buffer;
if (!sbuff) {
sdev_printk(KERN_ERR, scp->device,
"%s: sense_buffer is NULL\n", __func__);
return;
}
asc = c_d ? INVALID_FIELD_IN_CDB : INVALID_FIELD_IN_PARAM_LIST;
memset(sbuff, 0, SCSI_SENSE_BUFFERSIZE);
scsi_build_sense_buffer(scsi_debug_dsense, sbuff, ILLEGAL_REQUEST,
asc, 0);
memset(sks, 0, sizeof(sks));
sks[0] = 0x80;
if (c_d)
sks[0] |= 0x40;
if (in_bit >= 0) {
sks[0] |= 0x8;
sks[0] |= 0x7 & in_bit;
}
put_unaligned_be16(in_byte, sks + 1);
if (scsi_debug_dsense) {
sl = sbuff[7] + 8;
sbuff[7] = sl;
sbuff[sl] = 0x2;
sbuff[sl + 1] = 0x6;
memcpy(sbuff + sl + 4, sks, 3);
} else
memcpy(sbuff + 15, sks, 3);
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
sdev_printk(KERN_INFO, scp->device, "%s: [sense_key,asc,ascq"
"]: [0x5,0x%x,0x0] %c byte=%d, bit=%d\n",
my_name, asc, c_d ? 'C' : 'D', in_byte, in_bit);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static void mk_sense_buffer(struct scsi_cmnd *scp, int key, int asc, int asq)
{
unsigned char *sbuff;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
sbuff = scp->sense_buffer;
if (!sbuff) {
sdev_printk(KERN_ERR, scp->device,
"%s: sense_buffer is NULL\n", __func__);
return;
}
memset(sbuff, 0, SCSI_SENSE_BUFFERSIZE);
scsi_build_sense_buffer(scsi_debug_dsense, sbuff, key, asc, asq);
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
sdev_printk(KERN_INFO, scp->device,
"%s: [sense_key,asc,ascq]: [0x%x,0x%x,0x%x]\n",
my_name, key, asc, asq);
}
static void
mk_sense_invalid_opcode(struct scsi_cmnd *scp)
{
mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_OPCODE, 0);
}
static int scsi_debug_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
{
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (0x1261 == cmd)
sdev_printk(KERN_INFO, dev,
"%s: BLKFLSBUF [0x1261]\n", __func__);
else if (0x5331 == cmd)
sdev_printk(KERN_INFO, dev,
"%s: CDROM_GET_CAPABILITY [0x5331]\n",
__func__);
else
sdev_printk(KERN_INFO, dev, "%s: cmd=0x%x\n",
__func__, cmd);
}
return -EINVAL;
/* return -ENOTTY; // correct return but upsets fdisk */
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static int check_readiness(struct scsi_cmnd *SCpnt, int uas_only,
struct sdebug_dev_info * devip)
{
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
int k;
bool debug = !!(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts);
k = find_first_bit(devip->uas_bm, SDEBUG_NUM_UAS);
if (k != SDEBUG_NUM_UAS) {
const char *cp = NULL;
switch (k) {
case SDEBUG_UA_POR:
mk_sense_buffer(SCpnt, UNIT_ATTENTION,
UA_RESET_ASC, POWER_ON_RESET_ASCQ);
if (debug)
cp = "power on reset";
break;
case SDEBUG_UA_BUS_RESET:
mk_sense_buffer(SCpnt, UNIT_ATTENTION,
UA_RESET_ASC, BUS_RESET_ASCQ);
if (debug)
cp = "bus reset";
break;
case SDEBUG_UA_MODE_CHANGED:
mk_sense_buffer(SCpnt, UNIT_ATTENTION,
UA_CHANGED_ASC, MODE_CHANGED_ASCQ);
if (debug)
cp = "mode parameters changed";
break;
case SDEBUG_UA_CAPACITY_CHANGED:
mk_sense_buffer(SCpnt, UNIT_ATTENTION,
UA_CHANGED_ASC, CAPACITY_CHANGED_ASCQ);
if (debug)
cp = "capacity data changed";
break;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
default:
pr_warn("%s: unexpected unit attention code=%d\n",
__func__, k);
if (debug)
cp = "unknown";
break;
}
clear_bit(k, devip->uas_bm);
if (debug)
sdev_printk(KERN_INFO, SCpnt->device,
"%s reports: Unit attention: %s\n",
my_name, cp);
return check_condition_result;
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if ((UAS_TUR == uas_only) && devip->stopped) {
mk_sense_buffer(SCpnt, NOT_READY, LOGICAL_UNIT_NOT_READY,
0x2);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (debug)
sdev_printk(KERN_INFO, SCpnt->device,
"%s reports: Not ready: %s\n", my_name,
"initializing command required");
return check_condition_result;
}
return 0;
}
/* Returns 0 if ok else (DID_ERROR << 16). Sets scp->resid . */
static int fill_from_dev_buffer(struct scsi_cmnd *scp, unsigned char *arr,
int arr_len)
{
int act_len;
struct scsi_data_buffer *sdb = scsi_in(scp);
if (!sdb->length)
return 0;
if (!(scsi_bidi_cmnd(scp) || scp->sc_data_direction == DMA_FROM_DEVICE))
return (DID_ERROR << 16);
act_len = sg_copy_from_buffer(sdb->table.sgl, sdb->table.nents,
arr, arr_len);
scsi_debug: fix do_device_access() with wrap around range do_device_access() is a function that abstracts copying SG list from/to ramdisk storage (fake_storep). It must deal with the ranges exceeding actual fake_storep size, because such ranges are valid if virtual_gb is set greater than zero, and they should be treated as fake_storep is repeatedly mirrored up to virtual size. Unfortunately, it can't deal with the range which wraps around the end of fake_storep. A wrap around range is copied by two sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't copy from/to in the middle of SG list, therefore the second call can't copy correctly. This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to the middle of SG list. This also simplifies the assignment of sdb->resid in fill_from_dev_buffer(). Because fill_from_dev_buffer() is now only called once per command execution cycle. So it is not necessary to take care to decrease sdb->resid if fill_from_dev_buffer() is called more than once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:57 +08:00
sdb->resid = scsi_bufflen(scp) - act_len;
return 0;
}
/* Returns number of bytes fetched into 'arr' or -1 if error. */
static int fetch_to_dev_buffer(struct scsi_cmnd *scp, unsigned char *arr,
int arr_len)
{
if (!scsi_bufflen(scp))
return 0;
if (!(scsi_bidi_cmnd(scp) || scp->sc_data_direction == DMA_TO_DEVICE))
return -1;
return scsi_sg_copy_to_buffer(scp, arr, arr_len);
}
static const char * inq_vendor_id = "Linux ";
static const char * inq_product_id = "scsi_debug ";
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static const char *inq_product_rev = "0184"; /* version less '.' */
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Device identification VPD page. Returns number of bytes placed in arr */
static int inquiry_evpd_83(unsigned char * arr, int port_group_id,
int target_dev_id, int dev_id_num,
const char * dev_id_str,
int dev_id_str_len)
{
int num, port_a;
char b[32];
port_a = target_dev_id + 1;
/* T10 vendor identifier field format (faked) */
arr[0] = 0x2; /* ASCII */
arr[1] = 0x1;
arr[2] = 0x0;
memcpy(&arr[4], inq_vendor_id, 8);
memcpy(&arr[12], inq_product_id, 16);
memcpy(&arr[28], dev_id_str, dev_id_str_len);
num = 8 + 16 + dev_id_str_len;
arr[3] = num;
num += 4;
if (dev_id_num >= 0) {
/* NAA-5, Logical unit identifier (binary) */
arr[num++] = 0x1; /* binary (not necessarily sas) */
arr[num++] = 0x3; /* PIV=0, lu, naa */
arr[num++] = 0x0;
arr[num++] = 0x8;
arr[num++] = 0x53; /* naa-5 ieee company id=0x333333 (fake) */
arr[num++] = 0x33;
arr[num++] = 0x33;
arr[num++] = 0x30;
arr[num++] = (dev_id_num >> 24);
arr[num++] = (dev_id_num >> 16) & 0xff;
arr[num++] = (dev_id_num >> 8) & 0xff;
arr[num++] = dev_id_num & 0xff;
/* Target relative port number */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0x94; /* PIV=1, target port, rel port */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x4; /* length */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0;
arr[num++] = 0x1; /* relative port A */
}
/* NAA-5, Target port identifier */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0x93; /* piv=1, target port, naa */
arr[num++] = 0x0;
arr[num++] = 0x8;
arr[num++] = 0x52; /* naa-5, company id=0x222222 (fake) */
arr[num++] = 0x22;
arr[num++] = 0x22;
arr[num++] = 0x20;
arr[num++] = (port_a >> 24);
arr[num++] = (port_a >> 16) & 0xff;
arr[num++] = (port_a >> 8) & 0xff;
arr[num++] = port_a & 0xff;
/* NAA-5, Target port group identifier */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0x95; /* piv=1, target port group id */
arr[num++] = 0x0;
arr[num++] = 0x4;
arr[num++] = 0;
arr[num++] = 0;
arr[num++] = (port_group_id >> 8) & 0xff;
arr[num++] = port_group_id & 0xff;
/* NAA-5, Target device identifier */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0xa3; /* piv=1, target device, naa */
arr[num++] = 0x0;
arr[num++] = 0x8;
arr[num++] = 0x52; /* naa-5, company id=0x222222 (fake) */
arr[num++] = 0x22;
arr[num++] = 0x22;
arr[num++] = 0x20;
arr[num++] = (target_dev_id >> 24);
arr[num++] = (target_dev_id >> 16) & 0xff;
arr[num++] = (target_dev_id >> 8) & 0xff;
arr[num++] = target_dev_id & 0xff;
/* SCSI name string: Target device identifier */
arr[num++] = 0x63; /* proto=sas, UTF-8 */
arr[num++] = 0xa8; /* piv=1, target device, SCSI name string */
arr[num++] = 0x0;
arr[num++] = 24;
memcpy(arr + num, "naa.52222220", 12);
num += 12;
snprintf(b, sizeof(b), "%08X", target_dev_id);
memcpy(arr + num, b, 8);
num += 8;
memset(arr + num, 0, 4);
num += 4;
return num;
}
static unsigned char vpd84_data[] = {
/* from 4th byte */ 0x22,0x22,0x22,0x0,0xbb,0x0,
0x22,0x22,0x22,0x0,0xbb,0x1,
0x22,0x22,0x22,0x0,0xbb,0x2,
};
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Software interface identification VPD page */
static int inquiry_evpd_84(unsigned char * arr)
{
memcpy(arr, vpd84_data, sizeof(vpd84_data));
return sizeof(vpd84_data);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Management network addresses VPD page */
static int inquiry_evpd_85(unsigned char * arr)
{
int num = 0;
const char * na1 = "https://www.kernel.org/config";
const char * na2 = "http://www.kernel.org/log";
int plen, olen;
arr[num++] = 0x1; /* lu, storage config */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0;
olen = strlen(na1);
plen = olen + 1;
if (plen % 4)
plen = ((plen / 4) + 1) * 4;
arr[num++] = plen; /* length, null termianted, padded */
memcpy(arr + num, na1, olen);
memset(arr + num + olen, 0, plen - olen);
num += plen;
arr[num++] = 0x4; /* lu, logging */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0;
olen = strlen(na2);
plen = olen + 1;
if (plen % 4)
plen = ((plen / 4) + 1) * 4;
arr[num++] = plen; /* length, null terminated, padded */
memcpy(arr + num, na2, olen);
memset(arr + num + olen, 0, plen - olen);
num += plen;
return num;
}
/* SCSI ports VPD page */
static int inquiry_evpd_88(unsigned char * arr, int target_dev_id)
{
int num = 0;
int port_a, port_b;
port_a = target_dev_id + 1;
port_b = port_a + 1;
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0;
arr[num++] = 0x1; /* relative port 1 (primary) */
memset(arr + num, 0, 6);
num += 6;
arr[num++] = 0x0;
arr[num++] = 12; /* length tp descriptor */
/* naa-5 target port identifier (A) */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0x93; /* PIV=1, target port, NAA */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x8; /* length */
arr[num++] = 0x52; /* NAA-5, company_id=0x222222 (fake) */
arr[num++] = 0x22;
arr[num++] = 0x22;
arr[num++] = 0x20;
arr[num++] = (port_a >> 24);
arr[num++] = (port_a >> 16) & 0xff;
arr[num++] = (port_a >> 8) & 0xff;
arr[num++] = port_a & 0xff;
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x0;
arr[num++] = 0x2; /* relative port 2 (secondary) */
memset(arr + num, 0, 6);
num += 6;
arr[num++] = 0x0;
arr[num++] = 12; /* length tp descriptor */
/* naa-5 target port identifier (B) */
arr[num++] = 0x61; /* proto=sas, binary */
arr[num++] = 0x93; /* PIV=1, target port, NAA */
arr[num++] = 0x0; /* reserved */
arr[num++] = 0x8; /* length */
arr[num++] = 0x52; /* NAA-5, company_id=0x222222 (fake) */
arr[num++] = 0x22;
arr[num++] = 0x22;
arr[num++] = 0x20;
arr[num++] = (port_b >> 24);
arr[num++] = (port_b >> 16) & 0xff;
arr[num++] = (port_b >> 8) & 0xff;
arr[num++] = port_b & 0xff;
return num;
}
static unsigned char vpd89_data[] = {
/* from 4th byte */ 0,0,0,0,
'l','i','n','u','x',' ',' ',' ',
'S','A','T',' ','s','c','s','i','_','d','e','b','u','g',' ',' ',
'1','2','3','4',
0x34,0,0,0,1,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,
0xec,0,0,0,
0x5a,0xc,0xff,0x3f,0x37,0xc8,0x10,0,0,0,0,0,0x3f,0,0,0,
0,0,0,0,0x58,0x58,0x58,0x58,0x58,0x58,0x58,0x58,0x20,0x20,0x20,0x20,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0,0,0,0x40,0x4,0,0x2e,0x33,
0x38,0x31,0x20,0x20,0x20,0x20,0x54,0x53,0x38,0x33,0x30,0x30,0x33,0x31,
0x53,0x41,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,
0x20,0x20,
0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,
0x10,0x80,
0,0,0,0x2f,0,0,0,0x2,0,0x2,0x7,0,0xff,0xff,0x1,0,
0x3f,0,0xc1,0xff,0x3e,0,0x10,0x1,0xb0,0xf8,0x50,0x9,0,0,0x7,0,
0x3,0,0x78,0,0x78,0,0xf0,0,0x78,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0x2,0,0,0,0,0,0,0,
0x7e,0,0x1b,0,0x6b,0x34,0x1,0x7d,0x3,0x40,0x69,0x34,0x1,0x3c,0x3,0x40,
0x7f,0x40,0,0,0,0,0xfe,0xfe,0,0,0,0,0,0xfe,0,0,
0,0,0,0,0,0,0,0,0xb0,0xf8,0x50,0x9,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0x1,0,0xb0,0xf8,0x50,0x9,0xb0,0xf8,0x50,0x9,0x20,0x20,0x2,0,0xb6,0x42,
0,0x80,0x8a,0,0x6,0x3c,0xa,0x3c,0xff,0xff,0xc6,0x7,0,0x1,0,0x8,
0xf0,0xf,0,0x10,0x2,0,0x30,0,0,0,0,0,0,0,0x6,0xfe,
0,0,0x2,0,0x50,0,0x8a,0,0x4f,0x95,0,0,0x21,0,0xb,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0xa5,0x51,
};
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* ATA Information VPD page */
static int inquiry_evpd_89(unsigned char * arr)
{
memcpy(arr, vpd89_data, sizeof(vpd89_data));
return sizeof(vpd89_data);
}
static unsigned char vpdb0_data[] = {
/* from 4th byte */ 0,0,0,4, 0,0,0x4,0, 0,0,0,64,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,
};
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Block limits VPD page (SBC-3) */
static int inquiry_evpd_b0(unsigned char * arr)
{
unsigned int gran;
memcpy(arr, vpdb0_data, sizeof(vpdb0_data));
/* Optimal transfer length granularity */
gran = 1 << scsi_debug_physblk_exp;
arr[2] = (gran >> 8) & 0xff;
arr[3] = gran & 0xff;
/* Maximum Transfer Length */
if (sdebug_store_sectors > 0x400) {
arr[4] = (sdebug_store_sectors >> 24) & 0xff;
arr[5] = (sdebug_store_sectors >> 16) & 0xff;
arr[6] = (sdebug_store_sectors >> 8) & 0xff;
arr[7] = sdebug_store_sectors & 0xff;
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
/* Optimal Transfer Length */
put_unaligned_be32(scsi_debug_opt_blks, &arr[8]);
if (scsi_debug_lbpu) {
/* Maximum Unmap LBA Count */
put_unaligned_be32(scsi_debug_unmap_max_blocks, &arr[16]);
/* Maximum Unmap Block Descriptor Count */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
put_unaligned_be32(scsi_debug_unmap_max_desc, &arr[20]);
}
/* Unmap Granularity Alignment */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (scsi_debug_unmap_alignment) {
put_unaligned_be32(scsi_debug_unmap_alignment, &arr[28]);
arr[28] |= 0x80; /* UGAVALID */
}
/* Optimal Unmap Granularity */
put_unaligned_be32(scsi_debug_unmap_granularity, &arr[24]);
/* Maximum WRITE SAME Length */
put_unaligned_be64(scsi_debug_write_same_length, &arr[32]);
return 0x3c; /* Mandatory page length for Logical Block Provisioning */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
return sizeof(vpdb0_data);
}
/* Block device characteristics VPD page (SBC-3) */
static int inquiry_evpd_b1(unsigned char *arr)
{
memset(arr, 0, 0x3c);
arr[0] = 0;
arr[1] = 1; /* non rotating medium (e.g. solid state) */
arr[2] = 0;
arr[3] = 5; /* less than 1.8" */
return 0x3c;
}
/* Logical block provisioning VPD page (SBC-3) */
static int inquiry_evpd_b2(unsigned char *arr)
{
memset(arr, 0, 0x4);
arr[0] = 0; /* threshold exponent */
if (scsi_debug_lbpu)
arr[1] = 1 << 7;
if (scsi_debug_lbpws)
arr[1] |= 1 << 6;
if (scsi_debug_lbpws10)
arr[1] |= 1 << 5;
if (scsi_debug_lbprz)
arr[1] |= 1 << 2;
return 0x4;
}
#define SDEBUG_LONG_INQ_SZ 96
#define SDEBUG_MAX_INQ_ARR_SZ 584
static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
unsigned char pq_pdt;
unsigned char * arr;
unsigned char *cmd = scp->cmnd;
int alloc_len, n, ret;
bool have_wlun;
alloc_len = (cmd[3] << 8) + cmd[4];
arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_ATOMIC);
if (! arr)
return DID_REQUEUE << 16;
have_wlun = (scp->device->lun == SAM2_WLUN_REPORT_LUNS);
if (have_wlun)
pq_pdt = 0x1e; /* present, wlun */
else if (scsi_debug_no_lun_0 && (0 == devip->lun))
pq_pdt = 0x7f; /* not present, no device type */
else
pq_pdt = (scsi_debug_ptype & 0x1f);
arr[0] = pq_pdt;
if (0x2 & cmd[1]) { /* CMDDT bit set */
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 1);
kfree(arr);
return check_condition_result;
} else if (0x1 & cmd[1]) { /* EVPD bit set */
int lu_id_num, port_group_id, target_dev_id, len;
char lu_id_str[6];
int host_no = devip->sdbg_host->shost->host_no;
port_group_id = (((host_no + 1) & 0x7f) << 8) +
(devip->channel & 0x7f);
if (0 == scsi_debug_vpd_use_hostno)
host_no = 0;
lu_id_num = have_wlun ? -1 : (((host_no + 1) * 2000) +
(devip->target * 1000) + devip->lun);
target_dev_id = ((host_no + 1) * 2000) +
(devip->target * 1000) - 3;
len = scnprintf(lu_id_str, 6, "%d", lu_id_num);
if (0 == cmd[2]) { /* supported vital product data pages */
arr[1] = cmd[2]; /*sanity */
n = 4;
arr[n++] = 0x0; /* this page */
arr[n++] = 0x80; /* unit serial number */
arr[n++] = 0x83; /* device identification */
arr[n++] = 0x84; /* software interface ident. */
arr[n++] = 0x85; /* management network addresses */
arr[n++] = 0x86; /* extended inquiry */
arr[n++] = 0x87; /* mode page policy */
arr[n++] = 0x88; /* SCSI ports */
arr[n++] = 0x89; /* ATA information */
arr[n++] = 0xb0; /* Block limits (SBC) */
arr[n++] = 0xb1; /* Block characteristics (SBC) */
if (scsi_debug_lbp()) /* Logical Block Prov. (SBC) */
arr[n++] = 0xb2;
arr[3] = n - 4; /* number of supported VPD pages */
} else if (0x80 == cmd[2]) { /* unit serial number */
arr[1] = cmd[2]; /*sanity */
arr[3] = len;
memcpy(&arr[4], lu_id_str, len);
} else if (0x83 == cmd[2]) { /* device identification */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_83(&arr[4], port_group_id,
target_dev_id, lu_id_num,
lu_id_str, len);
} else if (0x84 == cmd[2]) { /* Software interface ident. */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_84(&arr[4]);
} else if (0x85 == cmd[2]) { /* Management network addresses */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_85(&arr[4]);
} else if (0x86 == cmd[2]) { /* extended inquiry */
arr[1] = cmd[2]; /*sanity */
arr[3] = 0x3c; /* number of following entries */
if (scsi_debug_dif == SD_DIF_TYPE3_PROTECTION)
arr[4] = 0x4; /* SPT: GRD_CHK:1 */
else if (scsi_debug_dif)
arr[4] = 0x5; /* SPT: GRD_CHK:1, REF_CHK:1 */
else
arr[4] = 0x0; /* no protection stuff */
arr[5] = 0x7; /* head of q, ordered + simple q's */
} else if (0x87 == cmd[2]) { /* mode page policy */
arr[1] = cmd[2]; /*sanity */
arr[3] = 0x8; /* number of following entries */
arr[4] = 0x2; /* disconnect-reconnect mp */
arr[6] = 0x80; /* mlus, shared */
arr[8] = 0x18; /* protocol specific lu */
arr[10] = 0x82; /* mlus, per initiator port */
} else if (0x88 == cmd[2]) { /* SCSI Ports */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_88(&arr[4], target_dev_id);
} else if (0x89 == cmd[2]) { /* ATA information */
arr[1] = cmd[2]; /*sanity */
n = inquiry_evpd_89(&arr[4]);
arr[2] = (n >> 8);
arr[3] = (n & 0xff);
} else if (0xb0 == cmd[2]) { /* Block limits (SBC) */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_b0(&arr[4]);
} else if (0xb1 == cmd[2]) { /* Block characteristics (SBC) */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_b1(&arr[4]);
} else if (0xb2 == cmd[2]) { /* Logical Block Prov. (SBC) */
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_b2(&arr[4]);
} else {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, -1);
kfree(arr);
return check_condition_result;
}
len = min(((arr[2] << 8) + arr[3]) + 4, alloc_len);
ret = fill_from_dev_buffer(scp, arr,
min(len, SDEBUG_MAX_INQ_ARR_SZ));
kfree(arr);
return ret;
}
/* drops through here for a standard inquiry */
arr[1] = scsi_debug_removable ? 0x80 : 0; /* Removable disk */
arr[2] = scsi_debug_scsi_level;
arr[3] = 2; /* response_data_format==2 */
arr[4] = SDEBUG_LONG_INQ_SZ - 5;
arr[5] = scsi_debug_dif ? 1 : 0; /* PROTECT bit */
if (0 == scsi_debug_vpd_use_hostno)
arr[5] = 0x10; /* claim: implicit TGPS */
arr[6] = 0x10; /* claim: MultiP */
/* arr[6] |= 0x40; ... claim: EncServ (enclosure services) */
arr[7] = 0xa; /* claim: LINKED + CMDQUE */
memcpy(&arr[8], inq_vendor_id, 8);
memcpy(&arr[16], inq_product_id, 16);
memcpy(&arr[32], inq_product_rev, 4);
/* version descriptors (2 bytes each) follow */
arr[58] = 0x0; arr[59] = 0xa2; /* SAM-5 rev 4 */
arr[60] = 0x4; arr[61] = 0x68; /* SPC-4 rev 37 */
n = 62;
if (scsi_debug_ptype == 0) {
arr[n++] = 0x4; arr[n++] = 0xc5; /* SBC-4 rev 36 */
} else if (scsi_debug_ptype == 1) {
arr[n++] = 0x5; arr[n++] = 0x25; /* SSC-4 rev 3 */
}
arr[n++] = 0x20; arr[n++] = 0xe6; /* SPL-3 rev 7 */
ret = fill_from_dev_buffer(scp, arr,
min(alloc_len, SDEBUG_LONG_INQ_SZ));
kfree(arr);
return ret;
}
static int resp_requests(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned char * sbuff;
unsigned char *cmd = scp->cmnd;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
unsigned char arr[SCSI_SENSE_BUFFERSIZE];
bool dsense, want_dsense;
int len = 18;
memset(arr, 0, sizeof(arr));
dsense = !!(cmd[1] & 1);
want_dsense = dsense || scsi_debug_dsense;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
sbuff = scp->sense_buffer;
if ((iec_m_pg[2] & 0x4) && (6 == (iec_m_pg[3] & 0xf))) {
if (dsense) {
arr[0] = 0x72;
arr[1] = 0x0; /* NO_SENSE in sense_key */
arr[2] = THRESHOLD_EXCEEDED;
arr[3] = 0xff; /* TEST set and MRIE==6 */
len = 8;
} else {
arr[0] = 0x70;
arr[2] = 0x0; /* NO_SENSE in sense_key */
arr[7] = 0xa; /* 18 byte sense buffer */
arr[12] = THRESHOLD_EXCEEDED;
arr[13] = 0xff; /* TEST set and MRIE==6 */
}
} else {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
memcpy(arr, sbuff, SCSI_SENSE_BUFFERSIZE);
if (arr[0] >= 0x70 && dsense == scsi_debug_dsense)
; /* have sense and formats match */
else if (arr[0] <= 0x70) {
if (dsense) {
memset(arr, 0, 8);
arr[0] = 0x72;
len = 8;
} else {
memset(arr, 0, 18);
arr[0] = 0x70;
arr[7] = 0xa;
}
} else if (dsense) {
memset(arr, 0, 8);
arr[0] = 0x72;
arr[1] = sbuff[2]; /* sense key */
arr[2] = sbuff[12]; /* asc */
arr[3] = sbuff[13]; /* ascq */
len = 8;
} else {
memset(arr, 0, 18);
arr[0] = 0x70;
arr[2] = sbuff[1];
arr[7] = 0xa;
arr[12] = sbuff[1];
arr[13] = sbuff[3];
}
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
mk_sense_buffer(scp, 0, NO_ADDITIONAL_SENSE, 0);
return fill_from_dev_buffer(scp, arr, len);
}
static int resp_start_stop(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned char *cmd = scp->cmnd;
int power_cond, start;
power_cond = (cmd[4] & 0xf0) >> 4;
if (power_cond) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 4, 7);
return check_condition_result;
}
start = cmd[4] & 1;
if (start == devip->stopped)
devip->stopped = !start;
return 0;
}
static sector_t get_sdebug_capacity(void)
{
if (scsi_debug_virtual_gb > 0)
return (sector_t)scsi_debug_virtual_gb *
(1073741824 / scsi_debug_sector_size);
else
return sdebug_store_sectors;
}
#define SDEBUG_READCAP_ARR_SZ 8
static int resp_readcap(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned char arr[SDEBUG_READCAP_ARR_SZ];
unsigned int capac;
/* following just in case virtual_gb changed */
sdebug_capacity = get_sdebug_capacity();
memset(arr, 0, SDEBUG_READCAP_ARR_SZ);
if (sdebug_capacity < 0xffffffff) {
capac = (unsigned int)sdebug_capacity - 1;
arr[0] = (capac >> 24);
arr[1] = (capac >> 16) & 0xff;
arr[2] = (capac >> 8) & 0xff;
arr[3] = capac & 0xff;
} else {
arr[0] = 0xff;
arr[1] = 0xff;
arr[2] = 0xff;
arr[3] = 0xff;
}
arr[6] = (scsi_debug_sector_size >> 8) & 0xff;
arr[7] = scsi_debug_sector_size & 0xff;
return fill_from_dev_buffer(scp, arr, SDEBUG_READCAP_ARR_SZ);
}
#define SDEBUG_READCAP16_ARR_SZ 32
static int resp_readcap16(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned char *cmd = scp->cmnd;
unsigned char arr[SDEBUG_READCAP16_ARR_SZ];
unsigned long long capac;
int k, alloc_len;
alloc_len = ((cmd[10] << 24) + (cmd[11] << 16) + (cmd[12] << 8)
+ cmd[13]);
/* following just in case virtual_gb changed */
sdebug_capacity = get_sdebug_capacity();
memset(arr, 0, SDEBUG_READCAP16_ARR_SZ);
capac = sdebug_capacity - 1;
for (k = 0; k < 8; ++k, capac >>= 8)
arr[7 - k] = capac & 0xff;
arr[8] = (scsi_debug_sector_size >> 24) & 0xff;
arr[9] = (scsi_debug_sector_size >> 16) & 0xff;
arr[10] = (scsi_debug_sector_size >> 8) & 0xff;
arr[11] = scsi_debug_sector_size & 0xff;
arr[13] = scsi_debug_physblk_exp & 0xf;
arr[14] = (scsi_debug_lowest_aligned >> 8) & 0x3f;
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (scsi_debug_lbp()) {
arr[14] |= 0x80; /* LBPME */
if (scsi_debug_lbprz)
arr[14] |= 0x40; /* LBPRZ */
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
arr[15] = scsi_debug_lowest_aligned & 0xff;
if (scsi_debug_dif) {
arr[12] = (scsi_debug_dif - 1) << 1; /* P_TYPE */
arr[12] |= 1; /* PROT_EN */
}
return fill_from_dev_buffer(scp, arr,
min(alloc_len, SDEBUG_READCAP16_ARR_SZ));
}
#define SDEBUG_MAX_TGTPGS_ARR_SZ 1412
static int resp_report_tgtpgs(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned char *cmd = scp->cmnd;
unsigned char * arr;
int host_no = devip->sdbg_host->shost->host_no;
int n, ret, alen, rlen;
int port_group_a, port_group_b, port_a, port_b;
alen = ((cmd[6] << 24) + (cmd[7] << 16) + (cmd[8] << 8)
+ cmd[9]);
arr = kzalloc(SDEBUG_MAX_TGTPGS_ARR_SZ, GFP_ATOMIC);
if (! arr)
return DID_REQUEUE << 16;
/*
* EVPD page 0x88 states we have two ports, one
* real and a fake port with no device connected.
* So we create two port groups with one port each
* and set the group with port B to unavailable.
*/
port_a = 0x1; /* relative port A */
port_b = 0x2; /* relative port B */
port_group_a = (((host_no + 1) & 0x7f) << 8) +
(devip->channel & 0x7f);
port_group_b = (((host_no + 1) & 0x7f) << 8) +
(devip->channel & 0x7f) + 0x80;
/*
* The asymmetric access state is cycled according to the host_id.
*/
n = 4;
if (0 == scsi_debug_vpd_use_hostno) {
arr[n++] = host_no % 3; /* Asymm access state */
arr[n++] = 0x0F; /* claim: all states are supported */
} else {
arr[n++] = 0x0; /* Active/Optimized path */
arr[n++] = 0x01; /* claim: only support active/optimized paths */
}
arr[n++] = (port_group_a >> 8) & 0xff;
arr[n++] = port_group_a & 0xff;
arr[n++] = 0; /* Reserved */
arr[n++] = 0; /* Status code */
arr[n++] = 0; /* Vendor unique */
arr[n++] = 0x1; /* One port per group */
arr[n++] = 0; /* Reserved */
arr[n++] = 0; /* Reserved */
arr[n++] = (port_a >> 8) & 0xff;
arr[n++] = port_a & 0xff;
arr[n++] = 3; /* Port unavailable */
arr[n++] = 0x08; /* claim: only unavailalbe paths are supported */
arr[n++] = (port_group_b >> 8) & 0xff;
arr[n++] = port_group_b & 0xff;
arr[n++] = 0; /* Reserved */
arr[n++] = 0; /* Status code */
arr[n++] = 0; /* Vendor unique */
arr[n++] = 0x1; /* One port per group */
arr[n++] = 0; /* Reserved */
arr[n++] = 0; /* Reserved */
arr[n++] = (port_b >> 8) & 0xff;
arr[n++] = port_b & 0xff;
rlen = n - 4;
arr[0] = (rlen >> 24) & 0xff;
arr[1] = (rlen >> 16) & 0xff;
arr[2] = (rlen >> 8) & 0xff;
arr[3] = rlen & 0xff;
/*
* Return the smallest value of either
* - The allocated length
* - The constructed command length
* - The maximum array size
*/
rlen = min(alen,n);
ret = fill_from_dev_buffer(scp, arr,
min(rlen, SDEBUG_MAX_TGTPGS_ARR_SZ));
kfree(arr);
return ret;
}
static int
resp_rsup_opcodes(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
bool rctd;
u8 reporting_opts, req_opcode, sdeb_i, supp;
u16 req_sa, u;
u32 alloc_len, a_len;
int k, offset, len, errsts, count, bump, na;
const struct opcode_info_t *oip;
const struct opcode_info_t *r_oip;
u8 *arr;
u8 *cmd = scp->cmnd;
rctd = !!(cmd[2] & 0x80);
reporting_opts = cmd[2] & 0x7;
req_opcode = cmd[3];
req_sa = get_unaligned_be16(cmd + 4);
alloc_len = get_unaligned_be32(cmd + 6);
if (alloc_len < 4 && alloc_len > 0xffff) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 6, -1);
return check_condition_result;
}
if (alloc_len > 8192)
a_len = 8192;
else
a_len = alloc_len;
arr = kzalloc((a_len < 256) ? 320 : a_len + 64, GFP_KERNEL);
if (NULL == arr) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
INSUFF_RES_ASCQ);
return check_condition_result;
}
switch (reporting_opts) {
case 0: /* all commands */
/* count number of commands */
for (count = 0, oip = opcode_info_arr;
oip->num_attached != 0xff; ++oip) {
if (F_INV_OP & oip->flags)
continue;
count += (oip->num_attached + 1);
}
bump = rctd ? 20 : 8;
put_unaligned_be32(count * bump, arr);
for (offset = 4, oip = opcode_info_arr;
oip->num_attached != 0xff && offset < a_len; ++oip) {
if (F_INV_OP & oip->flags)
continue;
na = oip->num_attached;
arr[offset] = oip->opcode;
put_unaligned_be16(oip->sa, arr + offset + 2);
if (rctd)
arr[offset + 5] |= 0x2;
if (FF_SA & oip->flags)
arr[offset + 5] |= 0x1;
put_unaligned_be16(oip->len_mask[0], arr + offset + 6);
if (rctd)
put_unaligned_be16(0xa, arr + offset + 8);
r_oip = oip;
for (k = 0, oip = oip->arrp; k < na; ++k, ++oip) {
if (F_INV_OP & oip->flags)
continue;
offset += bump;
arr[offset] = oip->opcode;
put_unaligned_be16(oip->sa, arr + offset + 2);
if (rctd)
arr[offset + 5] |= 0x2;
if (FF_SA & oip->flags)
arr[offset + 5] |= 0x1;
put_unaligned_be16(oip->len_mask[0],
arr + offset + 6);
if (rctd)
put_unaligned_be16(0xa,
arr + offset + 8);
}
oip = r_oip;
offset += bump;
}
break;
case 1: /* one command: opcode only */
case 2: /* one command: opcode plus service action */
case 3: /* one command: if sa==0 then opcode only else opcode+sa */
sdeb_i = opcode_ind_arr[req_opcode];
oip = &opcode_info_arr[sdeb_i];
if (F_INV_OP & oip->flags) {
supp = 1;
offset = 4;
} else {
if (1 == reporting_opts) {
if (FF_SA & oip->flags) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB,
2, 2);
kfree(arr);
return check_condition_result;
}
req_sa = 0;
} else if (2 == reporting_opts &&
0 == (FF_SA & oip->flags)) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 4, -1);
kfree(arr); /* point at requested sa */
return check_condition_result;
}
if (0 == (FF_SA & oip->flags) &&
req_opcode == oip->opcode)
supp = 3;
else if (0 == (FF_SA & oip->flags)) {
na = oip->num_attached;
for (k = 0, oip = oip->arrp; k < na;
++k, ++oip) {
if (req_opcode == oip->opcode)
break;
}
supp = (k >= na) ? 1 : 3;
} else if (req_sa != oip->sa) {
na = oip->num_attached;
for (k = 0, oip = oip->arrp; k < na;
++k, ++oip) {
if (req_sa == oip->sa)
break;
}
supp = (k >= na) ? 1 : 3;
} else
supp = 3;
if (3 == supp) {
u = oip->len_mask[0];
put_unaligned_be16(u, arr + 2);
arr[4] = oip->opcode;
for (k = 1; k < u; ++k)
arr[4 + k] = (k < 16) ?
oip->len_mask[k] : 0xff;
offset = 4 + u;
} else
offset = 4;
}
arr[1] = (rctd ? 0x80 : 0) | supp;
if (rctd) {
put_unaligned_be16(0xa, arr + offset);
offset += 12;
}
break;
default:
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 2);
kfree(arr);
return check_condition_result;
}
offset = (offset < a_len) ? offset : a_len;
len = (offset < alloc_len) ? offset : alloc_len;
errsts = fill_from_dev_buffer(scp, arr, len);
kfree(arr);
return errsts;
}
static int
resp_rsup_tmfs(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
bool repd;
u32 alloc_len, len;
u8 arr[16];
u8 *cmd = scp->cmnd;
memset(arr, 0, sizeof(arr));
repd = !!(cmd[2] & 0x80);
alloc_len = get_unaligned_be32(cmd + 6);
if (alloc_len < 4) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 6, -1);
return check_condition_result;
}
arr[0] = 0xc8; /* ATS | ATSS | LURS */
arr[1] = 0x1; /* ITNRS */
if (repd) {
arr[3] = 0xc;
len = 16;
} else
len = 4;
len = (len < alloc_len) ? len : alloc_len;
return fill_from_dev_buffer(scp, arr, len);
}
/* <<Following mode page info copied from ST318451LW>> */
static int resp_err_recov_pg(unsigned char * p, int pcontrol, int target)
{ /* Read-Write Error Recovery page for mode_sense */
unsigned char err_recov_pg[] = {0x1, 0xa, 0xc0, 11, 240, 0, 0, 0,
5, 0, 0xff, 0xff};
memcpy(p, err_recov_pg, sizeof(err_recov_pg));
if (1 == pcontrol)
memset(p + 2, 0, sizeof(err_recov_pg) - 2);
return sizeof(err_recov_pg);
}
static int resp_disconnect_pg(unsigned char * p, int pcontrol, int target)
{ /* Disconnect-Reconnect page for mode_sense */
unsigned char disconnect_pg[] = {0x2, 0xe, 128, 128, 0, 10, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0};
memcpy(p, disconnect_pg, sizeof(disconnect_pg));
if (1 == pcontrol)
memset(p + 2, 0, sizeof(disconnect_pg) - 2);
return sizeof(disconnect_pg);
}
static int resp_format_pg(unsigned char * p, int pcontrol, int target)
{ /* Format device page for mode_sense */
unsigned char format_pg[] = {0x3, 0x16, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0x40, 0, 0, 0};
memcpy(p, format_pg, sizeof(format_pg));
p[10] = (sdebug_sectors_per >> 8) & 0xff;
p[11] = sdebug_sectors_per & 0xff;
p[12] = (scsi_debug_sector_size >> 8) & 0xff;
p[13] = scsi_debug_sector_size & 0xff;
if (scsi_debug_removable)
p[20] |= 0x20; /* should agree with INQUIRY */
if (1 == pcontrol)
memset(p + 2, 0, sizeof(format_pg) - 2);
return sizeof(format_pg);
}
static int resp_caching_pg(unsigned char * p, int pcontrol, int target)
{ /* Caching page for mode_sense */
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
unsigned char ch_caching_pg[] = {/* 0x8, 18, */ 0x4, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
unsigned char d_caching_pg[] = {0x8, 18, 0x14, 0, 0xff, 0xff, 0, 0,
0xff, 0xff, 0xff, 0xff, 0x80, 0x14, 0, 0, 0, 0, 0, 0};
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (SCSI_DEBUG_OPT_N_WCE & scsi_debug_opts)
caching_pg[2] &= ~0x4; /* set WCE=0 (default WCE=1) */
memcpy(p, caching_pg, sizeof(caching_pg));
if (1 == pcontrol)
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
memcpy(p + 2, ch_caching_pg, sizeof(ch_caching_pg));
else if (2 == pcontrol)
memcpy(p, d_caching_pg, sizeof(d_caching_pg));
return sizeof(caching_pg);
}
static int resp_ctrl_m_pg(unsigned char * p, int pcontrol, int target)
{ /* Control mode page for mode_sense */
unsigned char ch_ctrl_m_pg[] = {/* 0xa, 10, */ 0x6, 0, 0, 0, 0, 0,
0, 0, 0, 0};
unsigned char d_ctrl_m_pg[] = {0xa, 10, 2, 0, 0, 0, 0, 0,
0, 0, 0x2, 0x4b};
if (scsi_debug_dsense)
ctrl_m_pg[2] |= 0x4;
else
ctrl_m_pg[2] &= ~0x4;
if (scsi_debug_ato)
ctrl_m_pg[5] |= 0x80; /* ATO=1 */
memcpy(p, ctrl_m_pg, sizeof(ctrl_m_pg));
if (1 == pcontrol)
memcpy(p + 2, ch_ctrl_m_pg, sizeof(ch_ctrl_m_pg));
else if (2 == pcontrol)
memcpy(p, d_ctrl_m_pg, sizeof(d_ctrl_m_pg));
return sizeof(ctrl_m_pg);
}
static int resp_iec_m_pg(unsigned char * p, int pcontrol, int target)
{ /* Informational Exceptions control mode page for mode_sense */
unsigned char ch_iec_m_pg[] = {/* 0x1c, 0xa, */ 0x4, 0xf, 0, 0, 0, 0,
0, 0, 0x0, 0x0};
unsigned char d_iec_m_pg[] = {0x1c, 0xa, 0x08, 0, 0, 0, 0, 0,
0, 0, 0x0, 0x0};
memcpy(p, iec_m_pg, sizeof(iec_m_pg));
if (1 == pcontrol)
memcpy(p + 2, ch_iec_m_pg, sizeof(ch_iec_m_pg));
else if (2 == pcontrol)
memcpy(p, d_iec_m_pg, sizeof(d_iec_m_pg));
return sizeof(iec_m_pg);
}
static int resp_sas_sf_m_pg(unsigned char * p, int pcontrol, int target)
{ /* SAS SSP mode page - short format for mode_sense */
unsigned char sas_sf_m_pg[] = {0x19, 0x6,
0x6, 0x0, 0x7, 0xd0, 0x0, 0x0};
memcpy(p, sas_sf_m_pg, sizeof(sas_sf_m_pg));
if (1 == pcontrol)
memset(p + 2, 0, sizeof(sas_sf_m_pg) - 2);
return sizeof(sas_sf_m_pg);
}
static int resp_sas_pcd_m_spg(unsigned char * p, int pcontrol, int target,
int target_dev_id)
{ /* SAS phy control and discover mode page for mode_sense */
unsigned char sas_pcd_m_pg[] = {0x59, 0x1, 0, 0x64, 0, 0x6, 0, 2,
0, 0, 0, 0, 0x10, 0x9, 0x8, 0x0,
0x52, 0x22, 0x22, 0x20, 0x0, 0x0, 0x0, 0x0,
0x51, 0x11, 0x11, 0x10, 0x0, 0x0, 0x0, 0x1,
0x2, 0, 0, 0, 0, 0, 0, 0,
0x88, 0x99, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
0, 1, 0, 0, 0x10, 0x9, 0x8, 0x0,
0x52, 0x22, 0x22, 0x20, 0x0, 0x0, 0x0, 0x0,
0x51, 0x11, 0x11, 0x10, 0x0, 0x0, 0x0, 0x1,
0x3, 0, 0, 0, 0, 0, 0, 0,
0x88, 0x99, 0, 0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, 0, 0,
};
int port_a, port_b;
port_a = target_dev_id + 1;
port_b = port_a + 1;
memcpy(p, sas_pcd_m_pg, sizeof(sas_pcd_m_pg));
p[20] = (port_a >> 24);
p[21] = (port_a >> 16) & 0xff;
p[22] = (port_a >> 8) & 0xff;
p[23] = port_a & 0xff;
p[48 + 20] = (port_b >> 24);
p[48 + 21] = (port_b >> 16) & 0xff;
p[48 + 22] = (port_b >> 8) & 0xff;
p[48 + 23] = port_b & 0xff;
if (1 == pcontrol)
memset(p + 4, 0, sizeof(sas_pcd_m_pg) - 4);
return sizeof(sas_pcd_m_pg);
}
static int resp_sas_sha_m_spg(unsigned char * p, int pcontrol)
{ /* SAS SSP shared protocol specific port mode subpage */
unsigned char sas_sha_m_pg[] = {0x59, 0x2, 0, 0xc, 0, 0x6, 0x10, 0,
0, 0, 0, 0, 0, 0, 0, 0,
};
memcpy(p, sas_sha_m_pg, sizeof(sas_sha_m_pg));
if (1 == pcontrol)
memset(p + 4, 0, sizeof(sas_sha_m_pg) - 4);
return sizeof(sas_sha_m_pg);
}
#define SDEBUG_MAX_MSENSE_SZ 256
static int
resp_mode_sense(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
unsigned char dbd, llbaa;
int pcontrol, pcode, subpcode, bd_len;
unsigned char dev_spec;
int k, alloc_len, msense_6, offset, len, target_dev_id;
int target = scp->device->id;
unsigned char * ap;
unsigned char arr[SDEBUG_MAX_MSENSE_SZ];
unsigned char *cmd = scp->cmnd;
dbd = !!(cmd[1] & 0x8);
pcontrol = (cmd[2] & 0xc0) >> 6;
pcode = cmd[2] & 0x3f;
subpcode = cmd[3];
msense_6 = (MODE_SENSE == cmd[0]);
llbaa = msense_6 ? 0 : !!(cmd[1] & 0x10);
if ((0 == scsi_debug_ptype) && (0 == dbd))
bd_len = llbaa ? 16 : 8;
else
bd_len = 0;
alloc_len = msense_6 ? cmd[4] : ((cmd[7] << 8) | cmd[8]);
memset(arr, 0, SDEBUG_MAX_MSENSE_SZ);
if (0x3 == pcontrol) { /* Saving values not supported */
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
mk_sense_buffer(scp, ILLEGAL_REQUEST, SAVING_PARAMS_UNSUP, 0);
return check_condition_result;
}
target_dev_id = ((devip->sdbg_host->shost->host_no + 1) * 2000) +
(devip->target * 1000) - 3;
/* set DPOFUA bit for disks */
if (0 == scsi_debug_ptype)
dev_spec = (DEV_READONLY(target) ? 0x80 : 0x0) | 0x10;
else
dev_spec = 0x0;
if (msense_6) {
arr[2] = dev_spec;
arr[3] = bd_len;
offset = 4;
} else {
arr[3] = dev_spec;
if (16 == bd_len)
arr[4] = 0x1; /* set LONGLBA bit */
arr[7] = bd_len; /* assume 255 or less */
offset = 8;
}
ap = arr + offset;
if ((bd_len > 0) && (!sdebug_capacity))
sdebug_capacity = get_sdebug_capacity();
if (8 == bd_len) {
if (sdebug_capacity > 0xfffffffe) {
ap[0] = 0xff;
ap[1] = 0xff;
ap[2] = 0xff;
ap[3] = 0xff;
} else {
ap[0] = (sdebug_capacity >> 24) & 0xff;
ap[1] = (sdebug_capacity >> 16) & 0xff;
ap[2] = (sdebug_capacity >> 8) & 0xff;
ap[3] = sdebug_capacity & 0xff;
}
ap[6] = (scsi_debug_sector_size >> 8) & 0xff;
ap[7] = scsi_debug_sector_size & 0xff;
offset += bd_len;
ap = arr + offset;
} else if (16 == bd_len) {
unsigned long long capac = sdebug_capacity;
for (k = 0; k < 8; ++k, capac >>= 8)
ap[7 - k] = capac & 0xff;
ap[12] = (scsi_debug_sector_size >> 24) & 0xff;
ap[13] = (scsi_debug_sector_size >> 16) & 0xff;
ap[14] = (scsi_debug_sector_size >> 8) & 0xff;
ap[15] = scsi_debug_sector_size & 0xff;
offset += bd_len;
ap = arr + offset;
}
if ((subpcode > 0x0) && (subpcode < 0xff) && (0x19 != pcode)) {
/* TODO: Control Extension page */
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
return check_condition_result;
}
switch (pcode) {
case 0x1: /* Read-Write error recovery page, direct access */
len = resp_err_recov_pg(ap, pcontrol, target);
offset += len;
break;
case 0x2: /* Disconnect-Reconnect page, all devices */
len = resp_disconnect_pg(ap, pcontrol, target);
offset += len;
break;
case 0x3: /* Format device page, direct access */
len = resp_format_pg(ap, pcontrol, target);
offset += len;
break;
case 0x8: /* Caching page, direct access */
len = resp_caching_pg(ap, pcontrol, target);
offset += len;
break;
case 0xa: /* Control Mode page, all devices */
len = resp_ctrl_m_pg(ap, pcontrol, target);
offset += len;
break;
case 0x19: /* if spc==1 then sas phy, control+discover */
if ((subpcode > 0x2) && (subpcode < 0xff)) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
return check_condition_result;
}
len = 0;
if ((0x0 == subpcode) || (0xff == subpcode))
len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
if ((0x1 == subpcode) || (0xff == subpcode))
len += resp_sas_pcd_m_spg(ap + len, pcontrol, target,
target_dev_id);
if ((0x2 == subpcode) || (0xff == subpcode))
len += resp_sas_sha_m_spg(ap + len, pcontrol);
offset += len;
break;
case 0x1c: /* Informational Exceptions Mode page, all devices */
len = resp_iec_m_pg(ap, pcontrol, target);
offset += len;
break;
case 0x3f: /* Read all Mode pages */
if ((0 == subpcode) || (0xff == subpcode)) {
len = resp_err_recov_pg(ap, pcontrol, target);
len += resp_disconnect_pg(ap + len, pcontrol, target);
len += resp_format_pg(ap + len, pcontrol, target);
len += resp_caching_pg(ap + len, pcontrol, target);
len += resp_ctrl_m_pg(ap + len, pcontrol, target);
len += resp_sas_sf_m_pg(ap + len, pcontrol, target);
if (0xff == subpcode) {
len += resp_sas_pcd_m_spg(ap + len, pcontrol,
target, target_dev_id);
len += resp_sas_sha_m_spg(ap + len, pcontrol);
}
len += resp_iec_m_pg(ap + len, pcontrol, target);
} else {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
return check_condition_result;
}
offset += len;
break;
default:
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
return check_condition_result;
}
if (msense_6)
arr[0] = offset - 1;
else {
arr[0] = ((offset - 2) >> 8) & 0xff;
arr[1] = (offset - 2) & 0xff;
}
return fill_from_dev_buffer(scp, arr, min(alloc_len, offset));
}
#define SDEBUG_MAX_MSELECT_SZ 512
static int
resp_mode_select(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
int pf, sp, ps, md_len, bd_len, off, spf, pg_len;
int param_len, res, mpage;
unsigned char arr[SDEBUG_MAX_MSELECT_SZ];
unsigned char *cmd = scp->cmnd;
int mselect6 = (MODE_SELECT == cmd[0]);
memset(arr, 0, sizeof(arr));
pf = cmd[1] & 0x10;
sp = cmd[1] & 0x1;
param_len = mselect6 ? cmd[4] : ((cmd[7] << 8) + cmd[8]);
if ((0 == pf) || sp || (param_len > SDEBUG_MAX_MSELECT_SZ)) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, mselect6 ? 4 : 7, -1);
return check_condition_result;
}
res = fetch_to_dev_buffer(scp, arr, param_len);
if (-1 == res)
return (DID_ERROR << 16);
else if ((res < param_len) &&
(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
sdev_printk(KERN_INFO, scp->device,
"%s: cdb indicated=%d, IO sent=%d bytes\n",
__func__, param_len, res);
md_len = mselect6 ? (arr[0] + 1) : ((arr[0] << 8) + arr[1] + 2);
bd_len = mselect6 ? arr[3] : ((arr[6] << 8) + arr[7]);
if (md_len > 2) {
mk_sense_invalid_fld(scp, SDEB_IN_DATA, 0, -1);
return check_condition_result;
}
off = bd_len + (mselect6 ? 4 : 8);
mpage = arr[off] & 0x3f;
ps = !!(arr[off] & 0x80);
if (ps) {
mk_sense_invalid_fld(scp, SDEB_IN_DATA, off, 7);
return check_condition_result;
}
spf = !!(arr[off] & 0x40);
pg_len = spf ? ((arr[off + 2] << 8) + arr[off + 3] + 4) :
(arr[off + 1] + 2);
if ((pg_len + off) > param_len) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
mk_sense_buffer(scp, ILLEGAL_REQUEST,
PARAMETER_LIST_LENGTH_ERR, 0);
return check_condition_result;
}
switch (mpage) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
case 0x8: /* Caching Mode page */
if (caching_pg[1] == arr[off + 1]) {
memcpy(caching_pg + 2, arr + off + 2,
sizeof(caching_pg) - 2);
goto set_mode_changed_ua;
}
break;
case 0xa: /* Control Mode page */
if (ctrl_m_pg[1] == arr[off + 1]) {
memcpy(ctrl_m_pg + 2, arr + off + 2,
sizeof(ctrl_m_pg) - 2);
scsi_debug_dsense = !!(ctrl_m_pg[2] & 0x4);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
goto set_mode_changed_ua;
}
break;
case 0x1c: /* Informational Exceptions Mode page */
if (iec_m_pg[1] == arr[off + 1]) {
memcpy(iec_m_pg + 2, arr + off + 2,
sizeof(iec_m_pg) - 2);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
goto set_mode_changed_ua;
}
break;
default:
break;
}
mk_sense_invalid_fld(scp, SDEB_IN_DATA, off, 5);
return check_condition_result;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
set_mode_changed_ua:
set_bit(SDEBUG_UA_MODE_CHANGED, devip->uas_bm);
return 0;
}
static int resp_temp_l_pg(unsigned char * arr)
{
unsigned char temp_l_pg[] = {0x0, 0x0, 0x3, 0x2, 0x0, 38,
0x0, 0x1, 0x3, 0x2, 0x0, 65,
};
memcpy(arr, temp_l_pg, sizeof(temp_l_pg));
return sizeof(temp_l_pg);
}
static int resp_ie_l_pg(unsigned char * arr)
{
unsigned char ie_l_pg[] = {0x0, 0x0, 0x3, 0x3, 0x0, 0x0, 38,
};
memcpy(arr, ie_l_pg, sizeof(ie_l_pg));
if (iec_m_pg[2] & 0x4) { /* TEST bit set */
arr[4] = THRESHOLD_EXCEEDED;
arr[5] = 0xff;
}
return sizeof(ie_l_pg);
}
#define SDEBUG_MAX_LSENSE_SZ 512
static int resp_log_sense(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
int ppc, sp, pcontrol, pcode, subpcode, alloc_len, len, n;
unsigned char arr[SDEBUG_MAX_LSENSE_SZ];
unsigned char *cmd = scp->cmnd;
memset(arr, 0, sizeof(arr));
ppc = cmd[1] & 0x2;
sp = cmd[1] & 0x1;
if (ppc || sp) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, ppc ? 1 : 0);
return check_condition_result;
}
pcontrol = (cmd[2] & 0xc0) >> 6;
pcode = cmd[2] & 0x3f;
subpcode = cmd[3] & 0xff;
alloc_len = (cmd[7] << 8) + cmd[8];
arr[0] = pcode;
if (0 == subpcode) {
switch (pcode) {
case 0x0: /* Supported log pages log page */
n = 4;
arr[n++] = 0x0; /* this page */
arr[n++] = 0xd; /* Temperature */
arr[n++] = 0x2f; /* Informational exceptions */
arr[3] = n - 4;
break;
case 0xd: /* Temperature log page */
arr[3] = resp_temp_l_pg(arr + 4);
break;
case 0x2f: /* Informational exceptions log page */
arr[3] = resp_ie_l_pg(arr + 4);
break;
default:
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
return check_condition_result;
}
} else if (0xff == subpcode) {
arr[0] |= 0x40;
arr[1] = subpcode;
switch (pcode) {
case 0x0: /* Supported log pages and subpages log page */
n = 4;
arr[n++] = 0x0;
arr[n++] = 0x0; /* 0,0 page */
arr[n++] = 0x0;
arr[n++] = 0xff; /* this page */
arr[n++] = 0xd;
arr[n++] = 0x0; /* Temperature */
arr[n++] = 0x2f;
arr[n++] = 0x0; /* Informational exceptions */
arr[3] = n - 4;
break;
case 0xd: /* Temperature subpages */
n = 4;
arr[n++] = 0xd;
arr[n++] = 0x0; /* Temperature */
arr[3] = n - 4;
break;
case 0x2f: /* Informational exceptions subpages */
n = 4;
arr[n++] = 0x2f;
arr[n++] = 0x0; /* Informational exceptions */
arr[3] = n - 4;
break;
default:
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
return check_condition_result;
}
} else {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
return check_condition_result;
}
len = min(((arr[2] << 8) + arr[3]) + 4, alloc_len);
return fill_from_dev_buffer(scp, arr,
min(len, SDEBUG_MAX_INQ_ARR_SZ));
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static int check_device_access_params(struct scsi_cmnd *scp,
unsigned long long lba, unsigned int num)
{
if (lba + num > sdebug_capacity) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
return check_condition_result;
}
/* transfer length excessive (tie in to block limits VPD page) */
if (num > sdebug_store_sectors) {
/* needs work to find which cdb byte 'num' comes from */
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
return 0;
}
scsi_debug: fix do_device_access() with wrap around range do_device_access() is a function that abstracts copying SG list from/to ramdisk storage (fake_storep). It must deal with the ranges exceeding actual fake_storep size, because such ranges are valid if virtual_gb is set greater than zero, and they should be treated as fake_storep is repeatedly mirrored up to virtual size. Unfortunately, it can't deal with the range which wraps around the end of fake_storep. A wrap around range is copied by two sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't copy from/to in the middle of SG list, therefore the second call can't copy correctly. This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to the middle of SG list. This also simplifies the assignment of sdb->resid in fill_from_dev_buffer(). Because fill_from_dev_buffer() is now only called once per command execution cycle. So it is not necessary to take care to decrease sdb->resid if fill_from_dev_buffer() is called more than once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:57 +08:00
/* Returns number of bytes copied or -1 if error. */
static int
do_device_access(struct scsi_cmnd *scmd, u64 lba, u32 num, bool do_write)
{
int ret;
u64 block, rest = 0;
scsi_debug: fix do_device_access() with wrap around range do_device_access() is a function that abstracts copying SG list from/to ramdisk storage (fake_storep). It must deal with the ranges exceeding actual fake_storep size, because such ranges are valid if virtual_gb is set greater than zero, and they should be treated as fake_storep is repeatedly mirrored up to virtual size. Unfortunately, it can't deal with the range which wraps around the end of fake_storep. A wrap around range is copied by two sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't copy from/to in the middle of SG list, therefore the second call can't copy correctly. This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to the middle of SG list. This also simplifies the assignment of sdb->resid in fill_from_dev_buffer(). Because fill_from_dev_buffer() is now only called once per command execution cycle. So it is not necessary to take care to decrease sdb->resid if fill_from_dev_buffer() is called more than once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:57 +08:00
struct scsi_data_buffer *sdb;
enum dma_data_direction dir;
size_t (*func)(struct scatterlist *, unsigned int, void *, size_t,
off_t);
if (do_write) {
scsi_debug: fix do_device_access() with wrap around range do_device_access() is a function that abstracts copying SG list from/to ramdisk storage (fake_storep). It must deal with the ranges exceeding actual fake_storep size, because such ranges are valid if virtual_gb is set greater than zero, and they should be treated as fake_storep is repeatedly mirrored up to virtual size. Unfortunately, it can't deal with the range which wraps around the end of fake_storep. A wrap around range is copied by two sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't copy from/to in the middle of SG list, therefore the second call can't copy correctly. This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to the middle of SG list. This also simplifies the assignment of sdb->resid in fill_from_dev_buffer(). Because fill_from_dev_buffer() is now only called once per command execution cycle. So it is not necessary to take care to decrease sdb->resid if fill_from_dev_buffer() is called more than once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:57 +08:00
sdb = scsi_out(scmd);
dir = DMA_TO_DEVICE;
func = sg_pcopy_to_buffer;
} else {
sdb = scsi_in(scmd);
dir = DMA_FROM_DEVICE;
func = sg_pcopy_from_buffer;
}
scsi_debug: fix do_device_access() with wrap around range do_device_access() is a function that abstracts copying SG list from/to ramdisk storage (fake_storep). It must deal with the ranges exceeding actual fake_storep size, because such ranges are valid if virtual_gb is set greater than zero, and they should be treated as fake_storep is repeatedly mirrored up to virtual size. Unfortunately, it can't deal with the range which wraps around the end of fake_storep. A wrap around range is copied by two sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't copy from/to in the middle of SG list, therefore the second call can't copy correctly. This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to the middle of SG list. This also simplifies the assignment of sdb->resid in fill_from_dev_buffer(). Because fill_from_dev_buffer() is now only called once per command execution cycle. So it is not necessary to take care to decrease sdb->resid if fill_from_dev_buffer() is called more than once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:57 +08:00
if (!sdb->length)
return 0;
if (!(scsi_bidi_cmnd(scmd) || scmd->sc_data_direction == dir))
return -1;
block = do_div(lba, sdebug_store_sectors);
if (block + num > sdebug_store_sectors)
rest = block + num - sdebug_store_sectors;
scsi_debug: fix do_device_access() with wrap around range do_device_access() is a function that abstracts copying SG list from/to ramdisk storage (fake_storep). It must deal with the ranges exceeding actual fake_storep size, because such ranges are valid if virtual_gb is set greater than zero, and they should be treated as fake_storep is repeatedly mirrored up to virtual size. Unfortunately, it can't deal with the range which wraps around the end of fake_storep. A wrap around range is copied by two sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't copy from/to in the middle of SG list, therefore the second call can't copy correctly. This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to the middle of SG list. This also simplifies the assignment of sdb->resid in fill_from_dev_buffer(). Because fill_from_dev_buffer() is now only called once per command execution cycle. So it is not necessary to take care to decrease sdb->resid if fill_from_dev_buffer() is called more than once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:57 +08:00
ret = func(sdb->table.sgl, sdb->table.nents,
fake_storep + (block * scsi_debug_sector_size),
(num - rest) * scsi_debug_sector_size, 0);
if (ret != (num - rest) * scsi_debug_sector_size)
return ret;
if (rest) {
ret += func(sdb->table.sgl, sdb->table.nents,
fake_storep, rest * scsi_debug_sector_size,
(num - rest) * scsi_debug_sector_size);
}
return ret;
}
/* If fake_store(lba,num) compares equal to arr(num), then copy top half of
* arr into fake_store(lba,num) and return true. If comparison fails then
* return false. */
static bool
comp_write_worker(u64 lba, u32 num, const u8 *arr)
{
bool res;
u64 block, rest = 0;
u32 store_blks = sdebug_store_sectors;
u32 lb_size = scsi_debug_sector_size;
block = do_div(lba, store_blks);
if (block + num > store_blks)
rest = block + num - store_blks;
res = !memcmp(fake_storep + (block * lb_size), arr,
(num - rest) * lb_size);
if (!res)
return res;
if (rest)
res = memcmp(fake_storep, arr + ((num - rest) * lb_size),
rest * lb_size);
if (!res)
return res;
arr += num * lb_size;
memcpy(fake_storep + (block * lb_size), arr, (num - rest) * lb_size);
if (rest)
memcpy(fake_storep, arr + ((num - rest) * lb_size),
rest * lb_size);
return res;
}
static __be16 dif_compute_csum(const void *buf, int len)
{
__be16 csum;
if (scsi_debug_guard)
csum = (__force __be16)ip_compute_csum(buf, len);
else
csum = cpu_to_be16(crc_t10dif(buf, len));
return csum;
}
static int dif_verify(struct sd_dif_tuple *sdt, const void *data,
sector_t sector, u32 ei_lba)
{
__be16 csum = dif_compute_csum(data, scsi_debug_sector_size);
if (sdt->guard_tag != csum) {
pr_err("%s: GUARD check failed on sector %lu rcvd 0x%04x, data 0x%04x\n",
__func__,
(unsigned long)sector,
be16_to_cpu(sdt->guard_tag),
be16_to_cpu(csum));
return 0x01;
}
if (scsi_debug_dif == SD_DIF_TYPE1_PROTECTION &&
be32_to_cpu(sdt->ref_tag) != (sector & 0xffffffff)) {
pr_err("%s: REF check failed on sector %lu\n",
__func__, (unsigned long)sector);
return 0x03;
}
if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
be32_to_cpu(sdt->ref_tag) != ei_lba) {
pr_err("%s: REF check failed on sector %lu\n",
__func__, (unsigned long)sector);
return 0x03;
}
return 0;
}
static void dif_copy_prot(struct scsi_cmnd *SCpnt, sector_t sector,
unsigned int sectors, bool read)
{
size_t resid;
void *paddr;
const void *dif_store_end = dif_storep + sdebug_store_sectors;
struct sg_mapping_iter miter;
/* Bytes of protection data to copy into sgl */
resid = sectors * sizeof(*dif_storep);
sg_miter_start(&miter, scsi_prot_sglist(SCpnt),
scsi_prot_sg_count(SCpnt), SG_MITER_ATOMIC |
(read ? SG_MITER_TO_SG : SG_MITER_FROM_SG));
while (sg_miter_next(&miter) && resid > 0) {
size_t len = min(miter.length, resid);
void *start = dif_store(sector);
size_t rest = 0;
if (dif_store_end < start + len)
rest = start + len - dif_store_end;
paddr = miter.addr;
if (read)
memcpy(paddr, start, len - rest);
else
memcpy(start, paddr, len - rest);
if (rest) {
if (read)
memcpy(paddr + len - rest, dif_storep, rest);
else
memcpy(dif_storep, paddr + len - rest, rest);
}
sector += len / sizeof(*dif_storep);
resid -= len;
}
sg_miter_stop(&miter);
}
static int prot_verify_read(struct scsi_cmnd *SCpnt, sector_t start_sec,
unsigned int sectors, u32 ei_lba)
{
unsigned int i;
struct sd_dif_tuple *sdt;
sector_t sector;
for (i = 0; i < sectors; i++, ei_lba++) {
int ret;
sector = start_sec + i;
sdt = dif_store(sector);
if (sdt->app_tag == cpu_to_be16(0xffff))
continue;
ret = dif_verify(sdt, fake_store(sector), sector, ei_lba);
if (ret) {
dif_errors++;
return ret;
}
}
dif_copy_prot(SCpnt, start_sec, sectors, true);
dix_reads++;
return 0;
}
static int
resp_read_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
u8 *cmd = scp->cmnd;
u64 lba;
u32 num;
u32 ei_lba;
unsigned long iflags;
int ret;
bool check_prot;
switch (cmd[0]) {
case READ_16:
ei_lba = 0;
lba = get_unaligned_be64(cmd + 2);
num = get_unaligned_be32(cmd + 10);
check_prot = true;
break;
case READ_10:
ei_lba = 0;
lba = get_unaligned_be32(cmd + 2);
num = get_unaligned_be16(cmd + 7);
check_prot = true;
break;
case READ_6:
ei_lba = 0;
lba = (u32)cmd[3] | (u32)cmd[2] << 8 |
(u32)(cmd[1] & 0x1f) << 16;
num = (0 == cmd[4]) ? 256 : cmd[4];
check_prot = true;
break;
case READ_12:
ei_lba = 0;
lba = get_unaligned_be32(cmd + 2);
num = get_unaligned_be32(cmd + 6);
check_prot = true;
break;
case XDWRITEREAD_10:
ei_lba = 0;
lba = get_unaligned_be32(cmd + 2);
num = get_unaligned_be16(cmd + 7);
check_prot = false;
break;
default: /* assume READ(32) */
lba = get_unaligned_be64(cmd + 12);
ei_lba = get_unaligned_be32(cmd + 20);
num = get_unaligned_be32(cmd + 28);
check_prot = false;
break;
}
if (check_prot) {
if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
(cmd[1] & 0xe0)) {
mk_sense_invalid_opcode(scp);
return check_condition_result;
}
if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
(cmd[1] & 0xe0) == 0)
sdev_printk(KERN_ERR, scp->device, "Unprotected RD "
"to DIF device\n");
}
if (sdebug_any_injecting_opt) {
struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
if (ep->inj_short)
num /= 2;
}
/* inline check_device_access_params() */
if (lba + num > sdebug_capacity) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
return check_condition_result;
}
/* transfer length excessive (tie in to block limits VPD page) */
if (num > sdebug_store_sectors) {
/* needs work to find which cdb byte 'num' comes from */
mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
if ((SCSI_DEBUG_OPT_MEDIUM_ERR & scsi_debug_opts) &&
(lba <= (OPT_MEDIUM_ERR_ADDR + OPT_MEDIUM_ERR_NUM - 1)) &&
((lba + num) > OPT_MEDIUM_ERR_ADDR)) {
/* claim unrecoverable read error */
mk_sense_buffer(scp, MEDIUM_ERROR, UNRECOVERED_READ_ERR, 0);
/* set info field and valid bit for fixed descriptor */
if (0x70 == (scp->sense_buffer[0] & 0x7f)) {
scp->sense_buffer[0] |= 0x80; /* Valid bit */
ret = (lba < OPT_MEDIUM_ERR_ADDR)
? OPT_MEDIUM_ERR_ADDR : (int)lba;
put_unaligned_be32(ret, scp->sense_buffer + 3);
}
scsi_set_resid(scp, scsi_bufflen(scp));
return check_condition_result;
}
read_lock_irqsave(&atomic_rw, iflags);
/* DIX + T10 DIF */
if (scsi_debug_dix && scsi_prot_sg_count(scp)) {
int prot_ret = prot_verify_read(scp, lba, num, ei_lba);
if (prot_ret) {
read_unlock_irqrestore(&atomic_rw, iflags);
mk_sense_buffer(scp, ABORTED_COMMAND, 0x10, prot_ret);
return illegal_condition_result;
}
}
ret = do_device_access(scp, lba, num, false);
read_unlock_irqrestore(&atomic_rw, iflags);
scsi_debug: fix do_device_access() with wrap around range do_device_access() is a function that abstracts copying SG list from/to ramdisk storage (fake_storep). It must deal with the ranges exceeding actual fake_storep size, because such ranges are valid if virtual_gb is set greater than zero, and they should be treated as fake_storep is repeatedly mirrored up to virtual size. Unfortunately, it can't deal with the range which wraps around the end of fake_storep. A wrap around range is copied by two sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't copy from/to in the middle of SG list, therefore the second call can't copy correctly. This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to the middle of SG list. This also simplifies the assignment of sdb->resid in fill_from_dev_buffer(). Because fill_from_dev_buffer() is now only called once per command execution cycle. So it is not necessary to take care to decrease sdb->resid if fill_from_dev_buffer() is called more than once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:57 +08:00
if (ret == -1)
return DID_ERROR << 16;
scsi_in(scp)->resid = scsi_bufflen(scp) - ret;
scsi_debug: fix do_device_access() with wrap around range do_device_access() is a function that abstracts copying SG list from/to ramdisk storage (fake_storep). It must deal with the ranges exceeding actual fake_storep size, because such ranges are valid if virtual_gb is set greater than zero, and they should be treated as fake_storep is repeatedly mirrored up to virtual size. Unfortunately, it can't deal with the range which wraps around the end of fake_storep. A wrap around range is copied by two sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't copy from/to in the middle of SG list, therefore the second call can't copy correctly. This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to the middle of SG list. This also simplifies the assignment of sdb->resid in fill_from_dev_buffer(). Because fill_from_dev_buffer() is now only called once per command execution cycle. So it is not necessary to take care to decrease sdb->resid if fill_from_dev_buffer() is called more than once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:57 +08:00
if (sdebug_any_injecting_opt) {
struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
if (ep->inj_recovered) {
mk_sense_buffer(scp, RECOVERED_ERROR,
THRESHOLD_EXCEEDED, 0);
return check_condition_result;
} else if (ep->inj_transport) {
mk_sense_buffer(scp, ABORTED_COMMAND,
TRANSPORT_PROBLEM, ACK_NAK_TO);
return check_condition_result;
} else if (ep->inj_dif) {
/* Logical block guard check failed */
mk_sense_buffer(scp, ABORTED_COMMAND, 0x10, 1);
return illegal_condition_result;
} else if (ep->inj_dix) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, 0x10, 1);
return illegal_condition_result;
}
}
scsi_debug: fix do_device_access() with wrap around range do_device_access() is a function that abstracts copying SG list from/to ramdisk storage (fake_storep). It must deal with the ranges exceeding actual fake_storep size, because such ranges are valid if virtual_gb is set greater than zero, and they should be treated as fake_storep is repeatedly mirrored up to virtual size. Unfortunately, it can't deal with the range which wraps around the end of fake_storep. A wrap around range is copied by two sg_copy_{from,to}_buffer() calls, but sg_copy_{from,to}_buffer() can't copy from/to in the middle of SG list, therefore the second call can't copy correctly. This fixes it by using sg_pcopy_{from,to}_buffer() that can copy from/to the middle of SG list. This also simplifies the assignment of sdb->resid in fill_from_dev_buffer(). Because fill_from_dev_buffer() is now only called once per command execution cycle. So it is not necessary to take care to decrease sdb->resid if fill_from_dev_buffer() is called more than once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: "James E.J. Bottomley" <JBottomley@parallels.com> Cc: Douglas Gilbert <dgilbert@interlog.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Horia Geanta <horia.geanta@freescale.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 07:01:57 +08:00
return 0;
}
void dump_sector(unsigned char *buf, int len)
{
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
int i, j, n;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err(">>> Sector Dump <<<\n");
for (i = 0 ; i < len ; i += 16) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
char b[128];
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
for (j = 0, n = 0; j < 16; j++) {
unsigned char c = buf[i+j];
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (c >= 0x20 && c < 0x7e)
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
n += scnprintf(b + n, sizeof(b) - n,
" %c ", buf[i+j]);
else
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
n += scnprintf(b + n, sizeof(b) - n,
"%02x ", buf[i+j]);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%04d: %s\n", i, b);
}
}
static int prot_verify_write(struct scsi_cmnd *SCpnt, sector_t start_sec,
unsigned int sectors, u32 ei_lba)
{
int ret;
struct sd_dif_tuple *sdt;
void *daddr;
sector_t sector = start_sec;
int ppage_offset;
int dpage_offset;
struct sg_mapping_iter diter;
struct sg_mapping_iter piter;
BUG_ON(scsi_sg_count(SCpnt) == 0);
BUG_ON(scsi_prot_sg_count(SCpnt) == 0);
sg_miter_start(&piter, scsi_prot_sglist(SCpnt),
scsi_prot_sg_count(SCpnt),
SG_MITER_ATOMIC | SG_MITER_FROM_SG);
sg_miter_start(&diter, scsi_sglist(SCpnt), scsi_sg_count(SCpnt),
SG_MITER_ATOMIC | SG_MITER_FROM_SG);
/* For each protection page */
while (sg_miter_next(&piter)) {
dpage_offset = 0;
if (WARN_ON(!sg_miter_next(&diter))) {
ret = 0x01;
goto out;
}
for (ppage_offset = 0; ppage_offset < piter.length;
ppage_offset += sizeof(struct sd_dif_tuple)) {
/* If we're at the end of the current
* data page advance to the next one
*/
if (dpage_offset >= diter.length) {
if (WARN_ON(!sg_miter_next(&diter))) {
ret = 0x01;
goto out;
}
dpage_offset = 0;
}
sdt = piter.addr + ppage_offset;
daddr = diter.addr + dpage_offset;
ret = dif_verify(sdt, daddr, sector, ei_lba);
if (ret) {
dump_sector(daddr, scsi_debug_sector_size);
goto out;
}
sector++;
ei_lba++;
dpage_offset += scsi_debug_sector_size;
}
diter.consumed = dpage_offset;
sg_miter_stop(&diter);
}
sg_miter_stop(&piter);
dif_copy_prot(SCpnt, start_sec, sectors, false);
dix_writes++;
return 0;
out:
dif_errors++;
sg_miter_stop(&diter);
sg_miter_stop(&piter);
return ret;
}
static unsigned long lba_to_map_index(sector_t lba)
{
if (scsi_debug_unmap_alignment) {
lba += scsi_debug_unmap_granularity -
scsi_debug_unmap_alignment;
}
do_div(lba, scsi_debug_unmap_granularity);
return lba;
}
static sector_t map_index_to_lba(unsigned long index)
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
{
sector_t lba = index * scsi_debug_unmap_granularity;
if (scsi_debug_unmap_alignment) {
lba -= scsi_debug_unmap_granularity -
scsi_debug_unmap_alignment;
}
return lba;
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
static unsigned int map_state(sector_t lba, unsigned int *num)
{
sector_t end;
unsigned int mapped;
unsigned long index;
unsigned long next;
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
index = lba_to_map_index(lba);
mapped = test_bit(index, map_storep);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (mapped)
next = find_next_zero_bit(map_storep, map_size, index);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
else
next = find_next_bit(map_storep, map_size, index);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
end = min_t(sector_t, sdebug_store_sectors, map_index_to_lba(next));
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
*num = end - lba;
return mapped;
}
static void map_region(sector_t lba, unsigned int len)
{
sector_t end = lba + len;
while (lba < end) {
unsigned long index = lba_to_map_index(lba);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (index < map_size)
set_bit(index, map_storep);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
lba = map_index_to_lba(index + 1);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
}
}
static void unmap_region(sector_t lba, unsigned int len)
{
sector_t end = lba + len;
while (lba < end) {
unsigned long index = lba_to_map_index(lba);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (lba == map_index_to_lba(index) &&
lba + scsi_debug_unmap_granularity <= end &&
index < map_size) {
clear_bit(index, map_storep);
if (scsi_debug_lbprz) {
memset(fake_storep +
lba * scsi_debug_sector_size, 0,
scsi_debug_sector_size *
scsi_debug_unmap_granularity);
}
if (dif_storep) {
memset(dif_storep + lba, 0xff,
sizeof(*dif_storep) *
scsi_debug_unmap_granularity);
}
}
lba = map_index_to_lba(index + 1);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
}
}
static int
resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
u8 *cmd = scp->cmnd;
u64 lba;
u32 num;
u32 ei_lba;
unsigned long iflags;
int ret;
bool check_prot;
switch (cmd[0]) {
case WRITE_16:
ei_lba = 0;
lba = get_unaligned_be64(cmd + 2);
num = get_unaligned_be32(cmd + 10);
check_prot = true;
break;
case WRITE_10:
ei_lba = 0;
lba = get_unaligned_be32(cmd + 2);
num = get_unaligned_be16(cmd + 7);
check_prot = true;
break;
case WRITE_6:
ei_lba = 0;
lba = (u32)cmd[3] | (u32)cmd[2] << 8 |
(u32)(cmd[1] & 0x1f) << 16;
num = (0 == cmd[4]) ? 256 : cmd[4];
check_prot = true;
break;
case WRITE_12:
ei_lba = 0;
lba = get_unaligned_be32(cmd + 2);
num = get_unaligned_be32(cmd + 6);
check_prot = true;
break;
case 0x53: /* XDWRITEREAD(10) */
ei_lba = 0;
lba = get_unaligned_be32(cmd + 2);
num = get_unaligned_be16(cmd + 7);
check_prot = false;
break;
default: /* assume WRITE(32) */
lba = get_unaligned_be64(cmd + 12);
ei_lba = get_unaligned_be32(cmd + 20);
num = get_unaligned_be32(cmd + 28);
check_prot = false;
break;
}
if (check_prot) {
if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
(cmd[1] & 0xe0)) {
mk_sense_invalid_opcode(scp);
return check_condition_result;
}
if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
(cmd[1] & 0xe0) == 0)
sdev_printk(KERN_ERR, scp->device, "Unprotected WR "
"to DIF device\n");
}
/* inline check_device_access_params() */
if (lba + num > sdebug_capacity) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
return check_condition_result;
}
/* transfer length excessive (tie in to block limits VPD page) */
if (num > sdebug_store_sectors) {
/* needs work to find which cdb byte 'num' comes from */
mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
write_lock_irqsave(&atomic_rw, iflags);
/* DIX + T10 DIF */
if (scsi_debug_dix && scsi_prot_sg_count(scp)) {
int prot_ret = prot_verify_write(scp, lba, num, ei_lba);
if (prot_ret) {
write_unlock_irqrestore(&atomic_rw, iflags);
mk_sense_buffer(scp, ILLEGAL_REQUEST, 0x10, prot_ret);
return illegal_condition_result;
}
}
ret = do_device_access(scp, lba, num, true);
if (scsi_debug_lbp())
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
map_region(lba, num);
write_unlock_irqrestore(&atomic_rw, iflags);
if (-1 == ret)
return (DID_ERROR << 16);
else if ((ret < (num * scsi_debug_sector_size)) &&
(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
sdev_printk(KERN_INFO, scp->device,
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
"%s: write: cdb indicated=%u, IO sent=%d bytes\n",
my_name, num * scsi_debug_sector_size, ret);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (sdebug_any_injecting_opt) {
struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
if (ep->inj_recovered) {
mk_sense_buffer(scp, RECOVERED_ERROR,
THRESHOLD_EXCEEDED, 0);
return check_condition_result;
} else if (ep->inj_dif) {
/* Logical block guard check failed */
mk_sense_buffer(scp, ABORTED_COMMAND, 0x10, 1);
return illegal_condition_result;
} else if (ep->inj_dix) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, 0x10, 1);
return illegal_condition_result;
}
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
return 0;
}
static int
resp_write_same(struct scsi_cmnd *scp, u64 lba, u32 num, u32 ei_lba,
bool unmap, bool ndob)
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
{
unsigned long iflags;
unsigned long long i;
int ret;
ret = check_device_access_params(scp, lba, num);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (ret)
return ret;
write_lock_irqsave(&atomic_rw, iflags);
if (unmap && scsi_debug_lbp()) {
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
unmap_region(lba, num);
goto out;
}
/* if ndob then zero 1 logical block, else fetch 1 logical block */
if (ndob) {
memset(fake_storep + (lba * scsi_debug_sector_size), 0,
scsi_debug_sector_size);
ret = 0;
} else
ret = fetch_to_dev_buffer(scp, fake_storep +
(lba * scsi_debug_sector_size),
scsi_debug_sector_size);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (-1 == ret) {
write_unlock_irqrestore(&atomic_rw, iflags);
return (DID_ERROR << 16);
} else if ((ret < (num * scsi_debug_sector_size)) &&
(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
sdev_printk(KERN_INFO, scp->device,
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
"%s: %s: cdb indicated=%u, IO sent=%d bytes\n",
my_name, "write same",
num * scsi_debug_sector_size, ret);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
/* Copy first sector to remaining blocks */
for (i = 1 ; i < num ; i++)
memcpy(fake_storep + ((lba + i) * scsi_debug_sector_size),
fake_storep + (lba * scsi_debug_sector_size),
scsi_debug_sector_size);
if (scsi_debug_lbp())
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
map_region(lba, num);
out:
write_unlock_irqrestore(&atomic_rw, iflags);
return 0;
}
static int
resp_write_same_10(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
u8 *cmd = scp->cmnd;
u32 lba;
u16 num;
u32 ei_lba = 0;
bool unmap = false;
if (cmd[1] & 0x8) {
if (scsi_debug_lbpws10 == 0) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 3);
return check_condition_result;
} else
unmap = true;
}
lba = get_unaligned_be32(cmd + 2);
num = get_unaligned_be16(cmd + 7);
if (num > scsi_debug_write_same_length) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 7, -1);
return check_condition_result;
}
return resp_write_same(scp, lba, num, ei_lba, unmap, false);
}
static int
resp_write_same_16(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
u8 *cmd = scp->cmnd;
u64 lba;
u32 num;
u32 ei_lba = 0;
bool unmap = false;
bool ndob = false;
if (cmd[1] & 0x8) { /* UNMAP */
if (scsi_debug_lbpws == 0) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 3);
return check_condition_result;
} else
unmap = true;
}
if (cmd[1] & 0x1) /* NDOB (no data-out buffer, assumes zeroes) */
ndob = true;
lba = get_unaligned_be64(cmd + 2);
num = get_unaligned_be32(cmd + 10);
if (num > scsi_debug_write_same_length) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 10, -1);
return check_condition_result;
}
return resp_write_same(scp, lba, num, ei_lba, unmap, ndob);
}
static int
resp_comp_write(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
u8 *cmd = scp->cmnd;
u8 *arr;
u8 *fake_storep_hold;
u64 lba;
u32 dnum;
u32 lb_size = scsi_debug_sector_size;
u8 num;
unsigned long iflags;
int ret;
int retval = 0;
lba = get_unaligned_be64(cmd + 2);
num = cmd[13]; /* 1 to a maximum of 255 logical blocks */
if (0 == num)
return 0; /* degenerate case, not an error */
if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
(cmd[1] & 0xe0)) {
mk_sense_invalid_opcode(scp);
return check_condition_result;
}
if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
(cmd[1] & 0xe0) == 0)
sdev_printk(KERN_ERR, scp->device, "Unprotected WR "
"to DIF device\n");
/* inline check_device_access_params() */
if (lba + num > sdebug_capacity) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
return check_condition_result;
}
/* transfer length excessive (tie in to block limits VPD page) */
if (num > sdebug_store_sectors) {
/* needs work to find which cdb byte 'num' comes from */
mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
dnum = 2 * num;
arr = kzalloc(dnum * lb_size, GFP_ATOMIC);
if (NULL == arr) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
INSUFF_RES_ASCQ);
return check_condition_result;
}
write_lock_irqsave(&atomic_rw, iflags);
/* trick do_device_access() to fetch both compare and write buffers
* from data-in into arr. Safe (atomic) since write_lock held. */
fake_storep_hold = fake_storep;
fake_storep = arr;
ret = do_device_access(scp, 0, dnum, true);
fake_storep = fake_storep_hold;
if (ret == -1) {
retval = DID_ERROR << 16;
goto cleanup;
} else if ((ret < (dnum * lb_size)) &&
(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
sdev_printk(KERN_INFO, scp->device, "%s: compare_write: cdb "
"indicated=%u, IO sent=%d bytes\n", my_name,
dnum * lb_size, ret);
if (!comp_write_worker(lba, num, arr)) {
mk_sense_buffer(scp, MISCOMPARE, MISCOMPARE_VERIFY_ASC, 0);
retval = check_condition_result;
goto cleanup;
}
if (scsi_debug_lbp())
map_region(lba, num);
cleanup:
write_unlock_irqrestore(&atomic_rw, iflags);
kfree(arr);
return retval;
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
struct unmap_block_desc {
__be64 lba;
__be32 blocks;
__be32 __reserved;
};
static int
resp_unmap(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
{
unsigned char *buf;
struct unmap_block_desc *desc;
unsigned int i, payload_len, descriptors;
int ret;
unsigned long iflags;
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (!scsi_debug_lbp())
return 0; /* fib and say its done */
payload_len = get_unaligned_be16(scp->cmnd + 7);
BUG_ON(scsi_bufflen(scp) != payload_len);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
descriptors = (payload_len - 8) / 16;
if (descriptors > scsi_debug_unmap_max_desc) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 7, -1);
return check_condition_result;
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
buf = kmalloc(scsi_bufflen(scp), GFP_ATOMIC);
if (!buf) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
INSUFF_RES_ASCQ);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
return check_condition_result;
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
scsi_sg_copy_to_buffer(scp, buf, scsi_bufflen(scp));
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
BUG_ON(get_unaligned_be16(&buf[0]) != payload_len - 2);
BUG_ON(get_unaligned_be16(&buf[2]) != descriptors * 16);
desc = (void *)&buf[8];
write_lock_irqsave(&atomic_rw, iflags);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
for (i = 0 ; i < descriptors ; i++) {
unsigned long long lba = get_unaligned_be64(&desc[i].lba);
unsigned int num = get_unaligned_be32(&desc[i].blocks);
ret = check_device_access_params(scp, lba, num);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (ret)
goto out;
unmap_region(lba, num);
}
ret = 0;
out:
write_unlock_irqrestore(&atomic_rw, iflags);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
kfree(buf);
return ret;
}
#define SDEBUG_GET_LBA_STATUS_LEN 32
static int
resp_get_lba_status(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
{
u8 *cmd = scp->cmnd;
u64 lba;
u32 alloc_len, mapped, num;
u8 arr[SDEBUG_GET_LBA_STATUS_LEN];
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
int ret;
lba = get_unaligned_be64(cmd + 2);
alloc_len = get_unaligned_be32(cmd + 10);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (alloc_len < 24)
return 0;
ret = check_device_access_params(scp, lba, 1);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (ret)
return ret;
if (scsi_debug_lbp())
mapped = map_state(lba, &num);
else {
mapped = 1;
/* following just in case virtual_gb changed */
sdebug_capacity = get_sdebug_capacity();
if (sdebug_capacity - lba <= 0xffffffff)
num = sdebug_capacity - lba;
else
num = 0xffffffff;
}
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
memset(arr, 0, SDEBUG_GET_LBA_STATUS_LEN);
put_unaligned_be32(20, arr); /* Parameter Data Length */
put_unaligned_be64(lba, arr + 8); /* LBA */
put_unaligned_be32(num, arr + 16); /* Number of blocks */
arr[20] = !mapped; /* prov_stat=0: mapped; 1: dealloc */
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
return fill_from_dev_buffer(scp, arr, SDEBUG_GET_LBA_STATUS_LEN);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
}
#define SDEBUG_RLUN_ARR_SZ 256
static int resp_report_luns(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
unsigned int alloc_len;
int lun_cnt, i, upper, num, n, want_wlun, shortish;
u64 lun;
unsigned char *cmd = scp->cmnd;
int select_report = (int)cmd[2];
struct scsi_lun *one_lun;
unsigned char arr[SDEBUG_RLUN_ARR_SZ];
unsigned char * max_addr;
alloc_len = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24);
shortish = (alloc_len < 4);
if (shortish || (select_report > 2)) {
mk_sense_invalid_fld(scp, SDEB_IN_CDB, shortish ? 6 : 2, -1);
return check_condition_result;
}
/* can produce response with up to 16k luns (lun 0 to lun 16383) */
memset(arr, 0, SDEBUG_RLUN_ARR_SZ);
lun_cnt = scsi_debug_max_luns;
if (1 == select_report)
lun_cnt = 0;
else if (scsi_debug_no_lun_0 && (lun_cnt > 0))
--lun_cnt;
want_wlun = (select_report > 0) ? 1 : 0;
num = lun_cnt + want_wlun;
arr[2] = ((sizeof(struct scsi_lun) * num) >> 8) & 0xff;
arr[3] = (sizeof(struct scsi_lun) * num) & 0xff;
n = min((int)((SDEBUG_RLUN_ARR_SZ - 8) /
sizeof(struct scsi_lun)), num);
if (n < num) {
want_wlun = 0;
lun_cnt = n;
}
one_lun = (struct scsi_lun *) &arr[8];
max_addr = arr + SDEBUG_RLUN_ARR_SZ;
for (i = 0, lun = (scsi_debug_no_lun_0 ? 1 : 0);
((i < lun_cnt) && ((unsigned char *)(one_lun + i) < max_addr));
i++, lun++) {
upper = (lun >> 8) & 0x3f;
if (upper)
one_lun[i].scsi_lun[0] =
(upper | (SAM2_LUN_ADDRESS_METHOD << 6));
one_lun[i].scsi_lun[1] = lun & 0xff;
}
if (want_wlun) {
one_lun[i].scsi_lun[0] = (SAM2_WLUN_REPORT_LUNS >> 8) & 0xff;
one_lun[i].scsi_lun[1] = SAM2_WLUN_REPORT_LUNS & 0xff;
i++;
}
alloc_len = (unsigned char *)(one_lun + i) - arr;
return fill_from_dev_buffer(scp, arr,
min((int)alloc_len, SDEBUG_RLUN_ARR_SZ));
}
static int resp_xdwriteread(struct scsi_cmnd *scp, unsigned long long lba,
unsigned int num, struct sdebug_dev_info *devip)
{
int j;
unsigned char *kaddr, *buf;
unsigned int offset;
struct scsi_data_buffer *sdb = scsi_in(scp);
struct sg_mapping_iter miter;
/* better not to use temporary buffer. */
buf = kmalloc(scsi_bufflen(scp), GFP_ATOMIC);
if (!buf) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
INSUFF_RES_ASCQ);
return check_condition_result;
}
scsi_sg_copy_to_buffer(scp, buf, scsi_bufflen(scp));
offset = 0;
sg_miter_start(&miter, sdb->table.sgl, sdb->table.nents,
SG_MITER_ATOMIC | SG_MITER_TO_SG);
while (sg_miter_next(&miter)) {
kaddr = miter.addr;
for (j = 0; j < miter.length; j++)
*(kaddr + j) ^= *(buf + offset + j);
offset += miter.length;
}
sg_miter_stop(&miter);
kfree(buf);
return 0;
}
static int
resp_xdwriteread_10(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
u8 *cmd = scp->cmnd;
u64 lba;
u32 num;
int errsts;
if (!scsi_bidi_cmnd(scp)) {
mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
INSUFF_RES_ASCQ);
return check_condition_result;
}
errsts = resp_read_dt0(scp, devip);
if (errsts)
return errsts;
if (!(cmd[1] & 0x4)) { /* DISABLE_WRITE is not set */
errsts = resp_write_dt0(scp, devip);
if (errsts)
return errsts;
}
lba = get_unaligned_be32(cmd + 2);
num = get_unaligned_be16(cmd + 7);
return resp_xdwriteread(scp, lba, num, devip);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* When timer or tasklet goes off this function is called. */
static void sdebug_q_cmd_complete(unsigned long indx)
{
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
int qa_indx;
int retiring = 0;
unsigned long iflags;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
struct sdebug_queued_cmd *sqcp;
struct scsi_cmnd *scp;
struct sdebug_dev_info *devip;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
atomic_inc(&sdebug_completions);
qa_indx = indx;
if ((qa_indx < 0) || (qa_indx >= SCSI_DEBUG_CANQUEUE)) {
pr_err("%s: wild qa_indx=%d\n", __func__, qa_indx);
return;
}
spin_lock_irqsave(&queued_arr_lock, iflags);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
sqcp = &queued_arr[qa_indx];
scp = sqcp->a_cmnd;
if (NULL == scp) {
spin_unlock_irqrestore(&queued_arr_lock, iflags);
pr_err("%s: scp is NULL\n", __func__);
return;
}
devip = (struct sdebug_dev_info *)scp->device->hostdata;
if (devip)
atomic_dec(&devip->num_in_q);
else
pr_err("%s: devip=NULL\n", __func__);
if (atomic_read(&retired_max_queue) > 0)
retiring = 1;
sqcp->a_cmnd = NULL;
if (!test_and_clear_bit(qa_indx, queued_in_use_bm)) {
spin_unlock_irqrestore(&queued_arr_lock, iflags);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: Unexpected completion\n", __func__);
return;
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (unlikely(retiring)) { /* user has reduced max_queue */
int k, retval;
retval = atomic_read(&retired_max_queue);
if (qa_indx >= retval) {
spin_unlock_irqrestore(&queued_arr_lock, iflags);
pr_err("%s: index %d too large\n", __func__, retval);
return;
}
k = find_last_bit(queued_in_use_bm, retval);
if ((k < scsi_debug_max_queue) || (k == retval))
atomic_set(&retired_max_queue, 0);
else
atomic_set(&retired_max_queue, k + 1);
}
spin_unlock_irqrestore(&queued_arr_lock, iflags);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
scp->scsi_done(scp); /* callback to mid level */
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* When high resolution timer goes off this function is called. */
static enum hrtimer_restart
sdebug_q_cmd_hrt_complete(struct hrtimer *timer)
{
int qa_indx;
int retiring = 0;
unsigned long iflags;
struct sdebug_hrtimer *sd_hrtp = (struct sdebug_hrtimer *)timer;
struct sdebug_queued_cmd *sqcp;
struct scsi_cmnd *scp;
struct sdebug_dev_info *devip;
atomic_inc(&sdebug_completions);
qa_indx = sd_hrtp->qa_indx;
if ((qa_indx < 0) || (qa_indx >= SCSI_DEBUG_CANQUEUE)) {
pr_err("%s: wild qa_indx=%d\n", __func__, qa_indx);
goto the_end;
}
spin_lock_irqsave(&queued_arr_lock, iflags);
sqcp = &queued_arr[qa_indx];
scp = sqcp->a_cmnd;
if (NULL == scp) {
spin_unlock_irqrestore(&queued_arr_lock, iflags);
pr_err("%s: scp is NULL\n", __func__);
goto the_end;
}
devip = (struct sdebug_dev_info *)scp->device->hostdata;
if (devip)
atomic_dec(&devip->num_in_q);
else
pr_err("%s: devip=NULL\n", __func__);
if (atomic_read(&retired_max_queue) > 0)
retiring = 1;
sqcp->a_cmnd = NULL;
if (!test_and_clear_bit(qa_indx, queued_in_use_bm)) {
spin_unlock_irqrestore(&queued_arr_lock, iflags);
pr_err("%s: Unexpected completion\n", __func__);
goto the_end;
}
if (unlikely(retiring)) { /* user has reduced max_queue */
int k, retval;
retval = atomic_read(&retired_max_queue);
if (qa_indx >= retval) {
spin_unlock_irqrestore(&queued_arr_lock, iflags);
pr_err("%s: index %d too large\n", __func__, retval);
goto the_end;
}
k = find_last_bit(queued_in_use_bm, retval);
if ((k < scsi_debug_max_queue) || (k == retval))
atomic_set(&retired_max_queue, 0);
else
atomic_set(&retired_max_queue, k + 1);
}
spin_unlock_irqrestore(&queued_arr_lock, iflags);
scp->scsi_done(scp); /* callback to mid level */
the_end:
return HRTIMER_NORESTART;
}
static struct sdebug_dev_info *
sdebug_device_create(struct sdebug_host_info *sdbg_host, gfp_t flags)
{
struct sdebug_dev_info *devip;
devip = kzalloc(sizeof(*devip), flags);
if (devip) {
devip->sdbg_host = sdbg_host;
list_add_tail(&devip->dev_list, &sdbg_host->dev_info_list);
}
return devip;
}
static struct sdebug_dev_info * devInfoReg(struct scsi_device * sdev)
{
struct sdebug_host_info * sdbg_host;
struct sdebug_dev_info * open_devip = NULL;
struct sdebug_dev_info * devip =
(struct sdebug_dev_info *)sdev->hostdata;
if (devip)
return devip;
sdbg_host = *(struct sdebug_host_info **)shost_priv(sdev->host);
if (!sdbg_host) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: Host info NULL\n", __func__);
return NULL;
}
list_for_each_entry(devip, &sdbg_host->dev_info_list, dev_list) {
if ((devip->used) && (devip->channel == sdev->channel) &&
(devip->target == sdev->id) &&
(devip->lun == sdev->lun))
return devip;
else {
if ((!devip->used) && (!open_devip))
open_devip = devip;
}
}
if (!open_devip) { /* try and make a new one */
open_devip = sdebug_device_create(sdbg_host, GFP_ATOMIC);
if (!open_devip) {
printk(KERN_ERR "%s: out of memory at line %d\n",
__func__, __LINE__);
return NULL;
}
}
open_devip->channel = sdev->channel;
open_devip->target = sdev->id;
open_devip->lun = sdev->lun;
open_devip->sdbg_host = sdbg_host;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
atomic_set(&open_devip->num_in_q, 0);
set_bit(SDEBUG_UA_POR, open_devip->uas_bm);
open_devip->used = true;
return open_devip;
}
static int scsi_debug_slave_alloc(struct scsi_device *sdp)
{
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: slave_alloc <%u %u %u %llu>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
queue_flag_set_unlocked(QUEUE_FLAG_BIDI, sdp->request_queue);
return 0;
}
static int scsi_debug_slave_configure(struct scsi_device *sdp)
{
struct sdebug_dev_info *devip;
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: slave_configure <%u %u %u %llu>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
if (sdp->host->max_cmd_len != SCSI_DEBUG_MAX_CMD_LEN)
sdp->host->max_cmd_len = SCSI_DEBUG_MAX_CMD_LEN;
devip = devInfoReg(sdp);
if (NULL == devip)
return 1; /* no resources, will be marked offline */
sdp->hostdata = devip;
blk_queue_max_segment_size(sdp->request_queue, -1U);
if (scsi_debug_no_uld)
sdp->no_uld_attach = 1;
return 0;
}
static void scsi_debug_slave_destroy(struct scsi_device *sdp)
{
struct sdebug_dev_info *devip =
(struct sdebug_dev_info *)sdp->hostdata;
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
printk(KERN_INFO "scsi_debug: slave_destroy <%u %u %u %llu>\n",
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
if (devip) {
/* make this slot available for re-use */
devip->used = false;
sdp->hostdata = NULL;
}
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Returns 1 if cmnd found (deletes its timer or tasklet), else returns 0 */
static int stop_queued_cmnd(struct scsi_cmnd *cmnd)
{
unsigned long iflags;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
int k, qmax, r_qmax;
struct sdebug_queued_cmd *sqcp;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
struct sdebug_dev_info *devip;
spin_lock_irqsave(&queued_arr_lock, iflags);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
qmax = scsi_debug_max_queue;
r_qmax = atomic_read(&retired_max_queue);
if (r_qmax > qmax)
qmax = r_qmax;
for (k = 0; k < qmax; ++k) {
if (test_bit(k, queued_in_use_bm)) {
sqcp = &queued_arr[k];
if (cmnd == sqcp->a_cmnd) {
devip = (struct sdebug_dev_info *)
cmnd->device->hostdata;
if (devip)
atomic_dec(&devip->num_in_q);
sqcp->a_cmnd = NULL;
spin_unlock_irqrestore(&queued_arr_lock,
iflags);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (scsi_debug_ndelay > 0) {
if (sqcp->sd_hrtp)
hrtimer_cancel(
&sqcp->sd_hrtp->hrt);
} else if (scsi_debug_delay > 0) {
if (sqcp->cmnd_timerp)
del_timer_sync(
sqcp->cmnd_timerp);
} else if (scsi_debug_delay < 0) {
if (sqcp->tletp)
tasklet_kill(sqcp->tletp);
}
clear_bit(k, queued_in_use_bm);
return 1;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
}
}
}
spin_unlock_irqrestore(&queued_arr_lock, iflags);
return 0;
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Deletes (stops) timers or tasklets of all queued commands */
static void stop_all_queued(void)
{
unsigned long iflags;
int k;
struct sdebug_queued_cmd *sqcp;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
struct sdebug_dev_info *devip;
spin_lock_irqsave(&queued_arr_lock, iflags);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
for (k = 0; k < SCSI_DEBUG_CANQUEUE; ++k) {
if (test_bit(k, queued_in_use_bm)) {
sqcp = &queued_arr[k];
if (sqcp->a_cmnd) {
devip = (struct sdebug_dev_info *)
sqcp->a_cmnd->device->hostdata;
if (devip)
atomic_dec(&devip->num_in_q);
sqcp->a_cmnd = NULL;
spin_unlock_irqrestore(&queued_arr_lock,
iflags);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (scsi_debug_ndelay > 0) {
if (sqcp->sd_hrtp)
hrtimer_cancel(
&sqcp->sd_hrtp->hrt);
} else if (scsi_debug_delay > 0) {
if (sqcp->cmnd_timerp)
del_timer_sync(
sqcp->cmnd_timerp);
} else if (scsi_debug_delay < 0) {
if (sqcp->tletp)
tasklet_kill(sqcp->tletp);
}
clear_bit(k, queued_in_use_bm);
spin_lock_irqsave(&queued_arr_lock, iflags);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
}
}
}
spin_unlock_irqrestore(&queued_arr_lock, iflags);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Free queued command memory on heap */
static void free_all_queued(void)
{
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
unsigned long iflags;
int k;
struct sdebug_queued_cmd *sqcp;
spin_lock_irqsave(&queued_arr_lock, iflags);
for (k = 0; k < SCSI_DEBUG_CANQUEUE; ++k) {
sqcp = &queued_arr[k];
kfree(sqcp->cmnd_timerp);
sqcp->cmnd_timerp = NULL;
kfree(sqcp->tletp);
sqcp->tletp = NULL;
kfree(sqcp->sd_hrtp);
sqcp->sd_hrtp = NULL;
}
spin_unlock_irqrestore(&queued_arr_lock, iflags);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static int scsi_debug_abort(struct scsi_cmnd *SCpnt)
{
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
++num_aborts;
if (SCpnt) {
if (SCpnt->device &&
(SCSI_DEBUG_OPT_ALL_NOISE & scsi_debug_opts))
sdev_printk(KERN_INFO, SCpnt->device, "%s\n",
__func__);
stop_queued_cmnd(SCpnt);
}
return SUCCESS;
}
static int scsi_debug_device_reset(struct scsi_cmnd * SCpnt)
{
struct sdebug_dev_info * devip;
++num_dev_resets;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (SCpnt && SCpnt->device) {
struct scsi_device *sdp = SCpnt->device;
if (SCSI_DEBUG_OPT_ALL_NOISE & scsi_debug_opts)
sdev_printk(KERN_INFO, sdp, "%s\n", __func__);
devip = devInfoReg(sdp);
if (devip)
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
set_bit(SDEBUG_UA_POR, devip->uas_bm);
}
return SUCCESS;
}
static int scsi_debug_target_reset(struct scsi_cmnd *SCpnt)
{
struct sdebug_host_info *sdbg_host;
struct sdebug_dev_info *devip;
struct scsi_device *sdp;
struct Scsi_Host *hp;
int k = 0;
++num_target_resets;
if (!SCpnt)
goto lie;
sdp = SCpnt->device;
if (!sdp)
goto lie;
if (SCSI_DEBUG_OPT_ALL_NOISE & scsi_debug_opts)
sdev_printk(KERN_INFO, sdp, "%s\n", __func__);
hp = sdp->host;
if (!hp)
goto lie;
sdbg_host = *(struct sdebug_host_info **)shost_priv(hp);
if (sdbg_host) {
list_for_each_entry(devip,
&sdbg_host->dev_info_list,
dev_list)
if (devip->target == sdp->id) {
set_bit(SDEBUG_UA_BUS_RESET, devip->uas_bm);
++k;
}
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (SCSI_DEBUG_OPT_RESET_NOISE & scsi_debug_opts)
sdev_printk(KERN_INFO, sdp,
"%s: %d device(s) found in target\n", __func__, k);
lie:
return SUCCESS;
}
static int scsi_debug_bus_reset(struct scsi_cmnd * SCpnt)
{
struct sdebug_host_info *sdbg_host;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
struct sdebug_dev_info *devip;
struct scsi_device * sdp;
struct Scsi_Host * hp;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
int k = 0;
++num_bus_resets;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (!(SCpnt && SCpnt->device))
goto lie;
sdp = SCpnt->device;
if (SCSI_DEBUG_OPT_ALL_NOISE & scsi_debug_opts)
sdev_printk(KERN_INFO, sdp, "%s\n", __func__);
hp = sdp->host;
if (hp) {
sdbg_host = *(struct sdebug_host_info **)shost_priv(hp);
if (sdbg_host) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
list_for_each_entry(devip,
&sdbg_host->dev_info_list,
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
dev_list) {
set_bit(SDEBUG_UA_BUS_RESET, devip->uas_bm);
++k;
}
}
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (SCSI_DEBUG_OPT_RESET_NOISE & scsi_debug_opts)
sdev_printk(KERN_INFO, sdp,
"%s: %d device(s) found in host\n", __func__, k);
lie:
return SUCCESS;
}
static int scsi_debug_host_reset(struct scsi_cmnd * SCpnt)
{
struct sdebug_host_info * sdbg_host;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
struct sdebug_dev_info *devip;
int k = 0;
++num_host_resets;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if ((SCpnt->device) && (SCSI_DEBUG_OPT_ALL_NOISE & scsi_debug_opts))
sdev_printk(KERN_INFO, SCpnt->device, "%s\n", __func__);
spin_lock(&sdebug_host_list_lock);
list_for_each_entry(sdbg_host, &sdebug_host_list, host_list) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
list_for_each_entry(devip, &sdbg_host->dev_info_list,
dev_list) {
set_bit(SDEBUG_UA_BUS_RESET, devip->uas_bm);
++k;
}
}
spin_unlock(&sdebug_host_list_lock);
stop_all_queued();
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (SCSI_DEBUG_OPT_RESET_NOISE & scsi_debug_opts)
sdev_printk(KERN_INFO, SCpnt->device,
"%s: %d device(s) found\n", __func__, k);
return SUCCESS;
}
static void __init sdebug_build_parts(unsigned char *ramp,
unsigned long store_size)
{
struct partition * pp;
int starts[SDEBUG_MAX_PARTS + 2];
int sectors_per_part, num_sectors, k;
int heads_by_sects, start_sec, end_sec;
/* assume partition table already zeroed */
if ((scsi_debug_num_parts < 1) || (store_size < 1048576))
return;
if (scsi_debug_num_parts > SDEBUG_MAX_PARTS) {
scsi_debug_num_parts = SDEBUG_MAX_PARTS;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_warn("%s: reducing partitions to %d\n", __func__,
SDEBUG_MAX_PARTS);
}
num_sectors = (int)sdebug_store_sectors;
sectors_per_part = (num_sectors - sdebug_sectors_per)
/ scsi_debug_num_parts;
heads_by_sects = sdebug_heads * sdebug_sectors_per;
starts[0] = sdebug_sectors_per;
for (k = 1; k < scsi_debug_num_parts; ++k)
starts[k] = ((k * sectors_per_part) / heads_by_sects)
* heads_by_sects;
starts[scsi_debug_num_parts] = num_sectors;
starts[scsi_debug_num_parts + 1] = 0;
ramp[510] = 0x55; /* magic partition markings */
ramp[511] = 0xAA;
pp = (struct partition *)(ramp + 0x1be);
for (k = 0; starts[k + 1]; ++k, ++pp) {
start_sec = starts[k];
end_sec = starts[k + 1] - 1;
pp->boot_ind = 0;
pp->cyl = start_sec / heads_by_sects;
pp->head = (start_sec - (pp->cyl * heads_by_sects))
/ sdebug_sectors_per;
pp->sector = (start_sec % sdebug_sectors_per) + 1;
pp->end_cyl = end_sec / heads_by_sects;
pp->end_head = (end_sec - (pp->end_cyl * heads_by_sects))
/ sdebug_sectors_per;
pp->end_sector = (end_sec % sdebug_sectors_per) + 1;
pp->start_sect = cpu_to_le32(start_sec);
pp->nr_sects = cpu_to_le32(end_sec - start_sec + 1);
pp->sys_ind = 0x83; /* plain Linux partition */
}
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static int
schedule_resp(struct scsi_cmnd *cmnd, struct sdebug_dev_info *devip,
int scsi_result, int delta_jiff)
{
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
unsigned long iflags;
int k, num_in_q, qdepth, inject;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
struct sdebug_queued_cmd *sqcp = NULL;
struct scsi_device *sdp = cmnd->device;
if (NULL == cmnd || NULL == devip) {
pr_warn("%s: called with NULL cmnd or devip pointer\n",
__func__);
/* no particularly good error to report back */
return SCSI_MLQUEUE_HOST_BUSY;
}
if ((scsi_result) && (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
sdev_printk(KERN_INFO, sdp, "%s: non-zero result=0x%x\n",
__func__, scsi_result);
if (delta_jiff == 0)
goto respond_in_thread;
/* schedule the response at a later time if resources permit */
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
spin_lock_irqsave(&queued_arr_lock, iflags);
num_in_q = atomic_read(&devip->num_in_q);
qdepth = cmnd->device->queue_depth;
inject = 0;
if ((qdepth > 0) && (num_in_q >= qdepth)) {
if (scsi_result) {
spin_unlock_irqrestore(&queued_arr_lock, iflags);
goto respond_in_thread;
} else
scsi_result = device_qfull_result;
} else if ((scsi_debug_every_nth != 0) &&
(SCSI_DEBUG_OPT_RARE_TSF & scsi_debug_opts) &&
(scsi_result == 0)) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if ((num_in_q == (qdepth - 1)) &&
(atomic_inc_return(&sdebug_a_tsf) >=
abs(scsi_debug_every_nth))) {
atomic_set(&sdebug_a_tsf, 0);
inject = 1;
scsi_result = device_qfull_result;
}
}
k = find_first_zero_bit(queued_in_use_bm, scsi_debug_max_queue);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (k >= scsi_debug_max_queue) {
spin_unlock_irqrestore(&queued_arr_lock, iflags);
if (scsi_result)
goto respond_in_thread;
else if (SCSI_DEBUG_OPT_ALL_TSF & scsi_debug_opts)
scsi_result = device_qfull_result;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (SCSI_DEBUG_OPT_Q_NOISE & scsi_debug_opts)
sdev_printk(KERN_INFO, sdp,
"%s: max_queue=%d exceeded, %s\n",
__func__, scsi_debug_max_queue,
(scsi_result ? "status: TASK SET FULL" :
"report: host busy"));
if (scsi_result)
goto respond_in_thread;
else
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
return SCSI_MLQUEUE_HOST_BUSY;
}
__set_bit(k, queued_in_use_bm);
atomic_inc(&devip->num_in_q);
sqcp = &queued_arr[k];
sqcp->a_cmnd = cmnd;
cmnd->result = scsi_result;
spin_unlock_irqrestore(&queued_arr_lock, iflags);
if (delta_jiff > 0) {
if (NULL == sqcp->cmnd_timerp) {
sqcp->cmnd_timerp = kmalloc(sizeof(struct timer_list),
GFP_ATOMIC);
if (NULL == sqcp->cmnd_timerp)
return SCSI_MLQUEUE_HOST_BUSY;
init_timer(sqcp->cmnd_timerp);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
sqcp->cmnd_timerp->function = sdebug_q_cmd_complete;
sqcp->cmnd_timerp->data = k;
sqcp->cmnd_timerp->expires = get_jiffies_64() + delta_jiff;
add_timer(sqcp->cmnd_timerp);
} else if (scsi_debug_ndelay > 0) {
ktime_t kt = ktime_set(0, scsi_debug_ndelay);
struct sdebug_hrtimer *sd_hp = sqcp->sd_hrtp;
if (NULL == sd_hp) {
sd_hp = kmalloc(sizeof(*sd_hp), GFP_ATOMIC);
if (NULL == sd_hp)
return SCSI_MLQUEUE_HOST_BUSY;
sqcp->sd_hrtp = sd_hp;
hrtimer_init(&sd_hp->hrt, CLOCK_MONOTONIC,
HRTIMER_MODE_REL);
sd_hp->hrt.function = sdebug_q_cmd_hrt_complete;
sd_hp->qa_indx = k;
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
hrtimer_start(&sd_hp->hrt, kt, HRTIMER_MODE_REL);
} else { /* delay < 0 */
if (NULL == sqcp->tletp) {
sqcp->tletp = kmalloc(sizeof(*sqcp->tletp),
GFP_ATOMIC);
if (NULL == sqcp->tletp)
return SCSI_MLQUEUE_HOST_BUSY;
tasklet_init(sqcp->tletp,
sdebug_q_cmd_complete, k);
}
if (-1 == delta_jiff)
tasklet_hi_schedule(sqcp->tletp);
else
tasklet_schedule(sqcp->tletp);
}
if ((SCSI_DEBUG_OPT_Q_NOISE & scsi_debug_opts) &&
(scsi_result == device_qfull_result))
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
sdev_printk(KERN_INFO, sdp,
"%s: num_in_q=%d +1, %s%s\n", __func__,
num_in_q, (inject ? "<inject> " : ""),
"status: TASK SET FULL");
return 0;
respond_in_thread: /* call back to mid-layer using invocation thread */
cmnd->result = scsi_result;
cmnd->scsi_done(cmnd);
return 0;
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Note: The following macros create attribute files in the
/sys/module/scsi_debug/parameters directory. Unfortunately this
driver is unaware of a change and cannot trigger auxiliary actions
as it can when the corresponding attribute in the
/sys/bus/pseudo/drivers/scsi_debug directory is changed.
*/
module_param_named(add_host, scsi_debug_add_host, int, S_IRUGO | S_IWUSR);
module_param_named(ato, scsi_debug_ato, int, S_IRUGO);
module_param_named(clustering, scsi_debug_clustering, bool, S_IRUGO | S_IWUSR);
module_param_named(delay, scsi_debug_delay, int, S_IRUGO | S_IWUSR);
module_param_named(dev_size_mb, scsi_debug_dev_size_mb, int, S_IRUGO);
module_param_named(dif, scsi_debug_dif, int, S_IRUGO);
module_param_named(dix, scsi_debug_dix, int, S_IRUGO);
module_param_named(dsense, scsi_debug_dsense, int, S_IRUGO | S_IWUSR);
module_param_named(every_nth, scsi_debug_every_nth, int, S_IRUGO | S_IWUSR);
module_param_named(fake_rw, scsi_debug_fake_rw, int, S_IRUGO | S_IWUSR);
module_param_named(guard, scsi_debug_guard, uint, S_IRUGO);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
module_param_named(host_lock, scsi_debug_host_lock, bool, S_IRUGO | S_IWUSR);
module_param_named(lbpu, scsi_debug_lbpu, int, S_IRUGO);
module_param_named(lbpws, scsi_debug_lbpws, int, S_IRUGO);
module_param_named(lbpws10, scsi_debug_lbpws10, int, S_IRUGO);
module_param_named(lbprz, scsi_debug_lbprz, int, S_IRUGO);
module_param_named(lowest_aligned, scsi_debug_lowest_aligned, int, S_IRUGO);
module_param_named(max_luns, scsi_debug_max_luns, int, S_IRUGO | S_IWUSR);
module_param_named(max_queue, scsi_debug_max_queue, int, S_IRUGO | S_IWUSR);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
module_param_named(ndelay, scsi_debug_ndelay, int, S_IRUGO | S_IWUSR);
module_param_named(no_lun_0, scsi_debug_no_lun_0, int, S_IRUGO | S_IWUSR);
module_param_named(no_uld, scsi_debug_no_uld, int, S_IRUGO);
module_param_named(num_parts, scsi_debug_num_parts, int, S_IRUGO);
module_param_named(num_tgts, scsi_debug_num_tgts, int, S_IRUGO | S_IWUSR);
module_param_named(opt_blks, scsi_debug_opt_blks, int, S_IRUGO);
module_param_named(opts, scsi_debug_opts, int, S_IRUGO | S_IWUSR);
module_param_named(physblk_exp, scsi_debug_physblk_exp, int, S_IRUGO);
module_param_named(ptype, scsi_debug_ptype, int, S_IRUGO | S_IWUSR);
module_param_named(removable, scsi_debug_removable, bool, S_IRUGO | S_IWUSR);
module_param_named(scsi_level, scsi_debug_scsi_level, int, S_IRUGO);
module_param_named(sector_size, scsi_debug_sector_size, int, S_IRUGO);
module_param_named(strict, scsi_debug_strict, bool, S_IRUGO | S_IWUSR);
module_param_named(unmap_alignment, scsi_debug_unmap_alignment, int, S_IRUGO);
module_param_named(unmap_granularity, scsi_debug_unmap_granularity, int, S_IRUGO);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
module_param_named(unmap_max_blocks, scsi_debug_unmap_max_blocks, int, S_IRUGO);
module_param_named(unmap_max_desc, scsi_debug_unmap_max_desc, int, S_IRUGO);
module_param_named(virtual_gb, scsi_debug_virtual_gb, int, S_IRUGO | S_IWUSR);
module_param_named(vpd_use_hostno, scsi_debug_vpd_use_hostno, int,
S_IRUGO | S_IWUSR);
module_param_named(write_same_length, scsi_debug_write_same_length, int,
S_IRUGO | S_IWUSR);
MODULE_AUTHOR("Eric Youngdale + Douglas Gilbert");
MODULE_DESCRIPTION("SCSI debug adapter driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(SCSI_DEBUG_VERSION);
MODULE_PARM_DESC(add_host, "0..127 hosts allowed(def=1)");
MODULE_PARM_DESC(ato, "application tag ownership: 0=disk 1=host (def=1)");
MODULE_PARM_DESC(clustering, "when set enables larger transfers (def=0)");
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
MODULE_PARM_DESC(delay, "response delay (def=1 jiffy); 0:imm, -1,-2:tiny");
MODULE_PARM_DESC(dev_size_mb, "size in MiB of ram shared by devs(def=8)");
MODULE_PARM_DESC(dif, "data integrity field type: 0-3 (def=0)");
MODULE_PARM_DESC(dix, "data integrity extensions mask (def=0)");
MODULE_PARM_DESC(dsense, "use descriptor sense format(def=0 -> fixed)");
MODULE_PARM_DESC(every_nth, "timeout every nth command(def=0)");
MODULE_PARM_DESC(fake_rw, "fake reads/writes instead of copying (def=0)");
MODULE_PARM_DESC(guard, "protection checksum: 0=crc, 1=ip (def=0)");
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
MODULE_PARM_DESC(host_lock, "use host_lock around all commands (def=0)");
MODULE_PARM_DESC(lbpu, "enable LBP, support UNMAP command (def=0)");
MODULE_PARM_DESC(lbpws, "enable LBP, support WRITE SAME(16) with UNMAP bit (def=0)");
MODULE_PARM_DESC(lbpws10, "enable LBP, support WRITE SAME(10) with UNMAP bit (def=0)");
MODULE_PARM_DESC(lbprz, "unmapped blocks return 0 on read (def=1)");
MODULE_PARM_DESC(lowest_aligned, "lowest aligned lba (def=0)");
MODULE_PARM_DESC(max_luns, "number of LUNs per target to simulate(def=1)");
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
MODULE_PARM_DESC(max_queue, "max number of queued commands (1 to max(def))");
MODULE_PARM_DESC(ndelay, "response delay in nanoseconds (def=0 -> ignore)");
MODULE_PARM_DESC(no_lun_0, "no LU number 0 (def=0 -> have lun 0)");
MODULE_PARM_DESC(no_uld, "stop ULD (e.g. sd driver) attaching (def=0))");
MODULE_PARM_DESC(num_parts, "number of partitions(def=0)");
MODULE_PARM_DESC(num_tgts, "number of targets per host to simulate(def=1)");
MODULE_PARM_DESC(opt_blks, "optimal transfer length in block (def=64)");
MODULE_PARM_DESC(opts, "1->noise, 2->medium_err, 4->timeout, 8->recovered_err... (def=0)");
MODULE_PARM_DESC(physblk_exp, "physical block exponent (def=0)");
MODULE_PARM_DESC(ptype, "SCSI peripheral type(def=0[disk])");
MODULE_PARM_DESC(removable, "claim to have removable media (def=0)");
MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=6[SPC-4])");
MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
MODULE_PARM_DESC(strict, "stricter checks: reserved field in cdb (def=0)");
MODULE_PARM_DESC(unmap_alignment, "lowest aligned thin provisioning lba (def=0)");
MODULE_PARM_DESC(unmap_granularity, "thin provisioning granularity in blocks (def=1)");
MODULE_PARM_DESC(unmap_max_blocks, "max # of blocks can be unmapped in one cmd (def=0xffffffff)");
MODULE_PARM_DESC(unmap_max_desc, "max # of ranges that can be unmapped in one cmd (def=256)");
MODULE_PARM_DESC(virtual_gb, "virtual gigabyte (GiB) size (def=0 -> use dev_size_mb)");
MODULE_PARM_DESC(vpd_use_hostno, "0 -> dev ids ignore hostno (def=1 -> unique dev ids)");
MODULE_PARM_DESC(write_same_length, "Maximum blocks per WRITE SAME cmd (def=0xffff)");
static char sdebug_info[256];
static const char * scsi_debug_info(struct Scsi_Host * shp)
{
sprintf(sdebug_info, "scsi_debug, version %s [%s], "
"dev_size_mb=%d, opts=0x%x", SCSI_DEBUG_VERSION,
scsi_debug_version_date, scsi_debug_dev_size_mb,
scsi_debug_opts);
return sdebug_info;
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* 'echo <val> > /proc/scsi/scsi_debug/<host_id>' writes to opts */
static int scsi_debug_write_info(struct Scsi_Host *host, char *buffer, int length)
{
char arr[16];
int opts;
int minLen = length > 15 ? 15 : length;
if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
return -EACCES;
memcpy(arr, buffer, minLen);
arr[minLen] = '\0';
if (1 != sscanf(arr, "%d", &opts))
return -EINVAL;
scsi_debug_opts = opts;
if (scsi_debug_every_nth != 0)
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
atomic_set(&sdebug_cmnd_count, 0);
return length;
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Output seen with 'cat /proc/scsi/scsi_debug/<host_id>'. It will be the
* same for each scsi_debug host (if more than one). Some of the counters
* output are not atomics so might be inaccurate in a busy system. */
static int scsi_debug_show_info(struct seq_file *m, struct Scsi_Host *host)
{
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
int f, l;
char b[32];
if (scsi_debug_every_nth > 0)
snprintf(b, sizeof(b), " (curr:%d)",
((SCSI_DEBUG_OPT_RARE_TSF & scsi_debug_opts) ?
atomic_read(&sdebug_a_tsf) :
atomic_read(&sdebug_cmnd_count)));
else
b[0] = '\0';
seq_printf(m, "scsi_debug adapter driver, version %s [%s]\n"
"num_tgts=%d, shared (ram) size=%d MB, opts=0x%x, "
"every_nth=%d%s\n"
"delay=%d, ndelay=%d, max_luns=%d, q_completions=%d\n"
"sector_size=%d bytes, cylinders=%d, heads=%d, sectors=%d\n"
"command aborts=%d; RESETs: device=%d, target=%d, bus=%d, "
"host=%d\ndix_reads=%d dix_writes=%d dif_errors=%d "
"usec_in_jiffy=%lu\n",
SCSI_DEBUG_VERSION, scsi_debug_version_date,
scsi_debug_num_tgts, scsi_debug_dev_size_mb, scsi_debug_opts,
scsi_debug_every_nth, b, scsi_debug_delay, scsi_debug_ndelay,
scsi_debug_max_luns, atomic_read(&sdebug_completions),
scsi_debug_sector_size, sdebug_cylinders_per, sdebug_heads,
sdebug_sectors_per, num_aborts, num_dev_resets,
num_target_resets, num_bus_resets, num_host_resets,
dix_reads, dix_writes, dif_errors, TICK_NSEC / 1000);
f = find_first_bit(queued_in_use_bm, scsi_debug_max_queue);
if (f != scsi_debug_max_queue) {
l = find_last_bit(queued_in_use_bm, scsi_debug_max_queue);
seq_printf(m, " %s BUSY: first,last bits set: %d,%d\n",
"queued_in_use_bm", f, l);
}
return 0;
}
static ssize_t delay_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_delay);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Returns -EBUSY if delay is being changed and commands are queued */
static ssize_t delay_store(struct device_driver *ddp, const char *buf,
size_t count)
{
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
int delay, res;
if ((count > 0) && (1 == sscanf(buf, "%d", &delay))) {
res = count;
if (scsi_debug_delay != delay) {
unsigned long iflags;
int k;
spin_lock_irqsave(&queued_arr_lock, iflags);
k = find_first_bit(queued_in_use_bm,
scsi_debug_max_queue);
if (k != scsi_debug_max_queue)
res = -EBUSY; /* have queued commands */
else {
scsi_debug_delay = delay;
scsi_debug_ndelay = 0;
}
spin_unlock_irqrestore(&queued_arr_lock, iflags);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
return res;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(delay);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static ssize_t ndelay_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_ndelay);
}
/* Returns -EBUSY if ndelay is being changed and commands are queued */
/* If > 0 and accepted then scsi_debug_delay is set to DELAY_OVERRIDDEN */
static ssize_t ndelay_store(struct device_driver *ddp, const char *buf,
size_t count)
{
unsigned long iflags;
int ndelay, res, k;
if ((count > 0) && (1 == sscanf(buf, "%d", &ndelay)) &&
(ndelay >= 0) && (ndelay < 1000000000)) {
res = count;
if (scsi_debug_ndelay != ndelay) {
spin_lock_irqsave(&queued_arr_lock, iflags);
k = find_first_bit(queued_in_use_bm,
scsi_debug_max_queue);
if (k != scsi_debug_max_queue)
res = -EBUSY; /* have queued commands */
else {
scsi_debug_ndelay = ndelay;
scsi_debug_delay = ndelay ? DELAY_OVERRIDDEN
: DEF_DELAY;
}
spin_unlock_irqrestore(&queued_arr_lock, iflags);
}
return res;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(ndelay);
static ssize_t opts_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "0x%x\n", scsi_debug_opts);
}
static ssize_t opts_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int opts;
char work[20];
if (1 == sscanf(buf, "%10s", work)) {
if (0 == strncasecmp(work,"0x", 2)) {
if (1 == sscanf(&work[2], "%x", &opts))
goto opts_done;
} else {
if (1 == sscanf(work, "%d", &opts))
goto opts_done;
}
}
return -EINVAL;
opts_done:
scsi_debug_opts = opts;
if (SCSI_DEBUG_OPT_RECOVERED_ERR & opts)
sdebug_any_injecting_opt = true;
else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & opts)
sdebug_any_injecting_opt = true;
else if (SCSI_DEBUG_OPT_DIF_ERR & opts)
sdebug_any_injecting_opt = true;
else if (SCSI_DEBUG_OPT_DIX_ERR & opts)
sdebug_any_injecting_opt = true;
else if (SCSI_DEBUG_OPT_SHORT_TRANSFER & opts)
sdebug_any_injecting_opt = true;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
atomic_set(&sdebug_cmnd_count, 0);
atomic_set(&sdebug_a_tsf, 0);
return count;
}
static DRIVER_ATTR_RW(opts);
static ssize_t ptype_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_ptype);
}
static ssize_t ptype_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_ptype = n;
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(ptype);
static ssize_t dsense_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dsense);
}
static ssize_t dsense_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_dsense = n;
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(dsense);
static ssize_t fake_rw_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_fake_rw);
}
static ssize_t fake_rw_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
n = (n > 0);
scsi_debug_fake_rw = (scsi_debug_fake_rw > 0);
if (scsi_debug_fake_rw != n) {
if ((0 == n) && (NULL == fake_storep)) {
unsigned long sz =
(unsigned long)scsi_debug_dev_size_mb *
1048576;
fake_storep = vmalloc(sz);
if (NULL == fake_storep) {
pr_err("%s: out of memory, 9\n",
__func__);
return -ENOMEM;
}
memset(fake_storep, 0, sz);
}
scsi_debug_fake_rw = n;
}
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(fake_rw);
static ssize_t no_lun_0_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_no_lun_0);
}
static ssize_t no_lun_0_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_no_lun_0 = n;
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(no_lun_0);
static ssize_t num_tgts_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_num_tgts);
}
static ssize_t num_tgts_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_num_tgts = n;
sdebug_max_tgts_luns();
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(num_tgts);
static ssize_t dev_size_mb_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dev_size_mb);
}
static DRIVER_ATTR_RO(dev_size_mb);
static ssize_t num_parts_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_num_parts);
}
static DRIVER_ATTR_RO(num_parts);
static ssize_t every_nth_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_every_nth);
}
static ssize_t every_nth_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int nth;
if ((count > 0) && (1 == sscanf(buf, "%d", &nth))) {
scsi_debug_every_nth = nth;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
atomic_set(&sdebug_cmnd_count, 0);
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(every_nth);
static ssize_t max_luns_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_max_luns);
}
static ssize_t max_luns_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_max_luns = n;
sdebug_max_tgts_luns();
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(max_luns);
static ssize_t max_queue_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_max_queue);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* N.B. max_queue can be changed while there are queued commands. In flight
* commands beyond the new max_queue will be completed. */
static ssize_t max_queue_store(struct device_driver *ddp, const char *buf,
size_t count)
{
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
unsigned long iflags;
int n, k;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n > 0) &&
(n <= SCSI_DEBUG_CANQUEUE)) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
spin_lock_irqsave(&queued_arr_lock, iflags);
k = find_last_bit(queued_in_use_bm, SCSI_DEBUG_CANQUEUE);
scsi_debug_max_queue = n;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (SCSI_DEBUG_CANQUEUE == k)
atomic_set(&retired_max_queue, 0);
else if (k >= n)
atomic_set(&retired_max_queue, k + 1);
else
atomic_set(&retired_max_queue, 0);
spin_unlock_irqrestore(&queued_arr_lock, iflags);
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(max_queue);
static ssize_t no_uld_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_no_uld);
}
static DRIVER_ATTR_RO(no_uld);
static ssize_t scsi_level_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_scsi_level);
}
static DRIVER_ATTR_RO(scsi_level);
static ssize_t virtual_gb_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_virtual_gb);
}
static ssize_t virtual_gb_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
bool changed;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
changed = (scsi_debug_virtual_gb != n);
scsi_debug_virtual_gb = n;
sdebug_capacity = get_sdebug_capacity();
if (changed) {
struct sdebug_host_info *sdhp;
struct sdebug_dev_info *dp;
spin_lock(&sdebug_host_list_lock);
list_for_each_entry(sdhp, &sdebug_host_list,
host_list) {
list_for_each_entry(dp, &sdhp->dev_info_list,
dev_list) {
set_bit(SDEBUG_UA_CAPACITY_CHANGED,
dp->uas_bm);
}
}
spin_unlock(&sdebug_host_list_lock);
}
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(virtual_gb);
static ssize_t add_host_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_add_host);
}
static ssize_t add_host_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int delta_hosts;
if (sscanf(buf, "%d", &delta_hosts) != 1)
return -EINVAL;
if (delta_hosts > 0) {
do {
sdebug_add_adapter();
} while (--delta_hosts);
} else if (delta_hosts < 0) {
do {
sdebug_remove_adapter();
} while (++delta_hosts);
}
return count;
}
static DRIVER_ATTR_RW(add_host);
static ssize_t vpd_use_hostno_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_vpd_use_hostno);
}
static ssize_t vpd_use_hostno_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_vpd_use_hostno = n;
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(vpd_use_hostno);
static ssize_t sector_size_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%u\n", scsi_debug_sector_size);
}
static DRIVER_ATTR_RO(sector_size);
static ssize_t dix_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dix);
}
static DRIVER_ATTR_RO(dix);
static ssize_t dif_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_dif);
}
static DRIVER_ATTR_RO(dif);
static ssize_t guard_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%u\n", scsi_debug_guard);
}
static DRIVER_ATTR_RO(guard);
static ssize_t ato_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_ato);
}
static DRIVER_ATTR_RO(ato);
static ssize_t map_show(struct device_driver *ddp, char *buf)
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
{
ssize_t count;
if (!scsi_debug_lbp())
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
return scnprintf(buf, PAGE_SIZE, "0-%u\n",
sdebug_store_sectors);
count = bitmap_scnlistprintf(buf, PAGE_SIZE, map_storep, map_size);
buf[count++] = '\n';
buf[count++] = 0;
return count;
}
static DRIVER_ATTR_RO(map);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
static ssize_t removable_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", scsi_debug_removable ? 1 : 0);
}
static ssize_t removable_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_removable = (n > 0);
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(removable);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static ssize_t host_lock_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", !!scsi_debug_host_lock);
}
/* Returns -EBUSY if host_lock is being changed and commands are queued */
static ssize_t host_lock_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n, res;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
bool new_host_lock = (n > 0);
res = count;
if (new_host_lock != scsi_debug_host_lock) {
unsigned long iflags;
int k;
spin_lock_irqsave(&queued_arr_lock, iflags);
k = find_first_bit(queued_in_use_bm,
scsi_debug_max_queue);
if (k != scsi_debug_max_queue)
res = -EBUSY; /* have queued commands */
else
scsi_debug_host_lock = new_host_lock;
spin_unlock_irqrestore(&queued_arr_lock, iflags);
}
return res;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(host_lock);
static ssize_t strict_show(struct device_driver *ddp, char *buf)
{
return scnprintf(buf, PAGE_SIZE, "%d\n", !!scsi_debug_strict);
}
static ssize_t strict_store(struct device_driver *ddp, const char *buf,
size_t count)
{
int n;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
scsi_debug_strict = (n > 0);
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(strict);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
/* Note: The following array creates attribute files in the
/sys/bus/pseudo/drivers/scsi_debug directory. The advantage of these
files (over those found in the /sys/module/scsi_debug/parameters
directory) is that auxiliary actions can be triggered when an attribute
is changed. For example see: sdebug_add_host_store() above.
*/
static struct attribute *sdebug_drv_attrs[] = {
&driver_attr_delay.attr,
&driver_attr_opts.attr,
&driver_attr_ptype.attr,
&driver_attr_dsense.attr,
&driver_attr_fake_rw.attr,
&driver_attr_no_lun_0.attr,
&driver_attr_num_tgts.attr,
&driver_attr_dev_size_mb.attr,
&driver_attr_num_parts.attr,
&driver_attr_every_nth.attr,
&driver_attr_max_luns.attr,
&driver_attr_max_queue.attr,
&driver_attr_no_uld.attr,
&driver_attr_scsi_level.attr,
&driver_attr_virtual_gb.attr,
&driver_attr_add_host.attr,
&driver_attr_vpd_use_hostno.attr,
&driver_attr_sector_size.attr,
&driver_attr_dix.attr,
&driver_attr_dif.attr,
&driver_attr_guard.attr,
&driver_attr_ato.attr,
&driver_attr_map.attr,
&driver_attr_removable.attr,
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
&driver_attr_host_lock.attr,
&driver_attr_ndelay.attr,
&driver_attr_strict.attr,
NULL,
};
ATTRIBUTE_GROUPS(sdebug_drv);
static struct device *pseudo_primary;
static int __init scsi_debug_init(void)
{
unsigned long sz;
int host_to_add;
int k;
int ret;
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
atomic_set(&sdebug_cmnd_count, 0);
atomic_set(&sdebug_completions, 0);
atomic_set(&retired_max_queue, 0);
if (scsi_debug_ndelay >= 1000000000) {
pr_warn("%s: ndelay must be less than 1 second, ignored\n",
__func__);
scsi_debug_ndelay = 0;
} else if (scsi_debug_ndelay > 0)
scsi_debug_delay = DELAY_OVERRIDDEN;
switch (scsi_debug_sector_size) {
case 512:
case 1024:
case 2048:
case 4096:
break;
default:
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: invalid sector_size %d\n", __func__,
scsi_debug_sector_size);
return -EINVAL;
}
switch (scsi_debug_dif) {
case SD_DIF_TYPE0_PROTECTION:
case SD_DIF_TYPE1_PROTECTION:
case SD_DIF_TYPE2_PROTECTION:
case SD_DIF_TYPE3_PROTECTION:
break;
default:
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: dif must be 0, 1, 2 or 3\n", __func__);
return -EINVAL;
}
if (scsi_debug_guard > 1) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: guard must be 0 or 1\n", __func__);
return -EINVAL;
}
if (scsi_debug_ato > 1) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: ato must be 0 or 1\n", __func__);
return -EINVAL;
}
if (scsi_debug_physblk_exp > 15) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: invalid physblk_exp %u\n", __func__,
scsi_debug_physblk_exp);
return -EINVAL;
}
if (scsi_debug_lowest_aligned > 0x3fff) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: lowest_aligned too big: %u\n", __func__,
scsi_debug_lowest_aligned);
return -EINVAL;
}
if (scsi_debug_dev_size_mb < 1)
scsi_debug_dev_size_mb = 1; /* force minimum 1 MB ramdisk */
sz = (unsigned long)scsi_debug_dev_size_mb * 1048576;
sdebug_store_sectors = sz / scsi_debug_sector_size;
sdebug_capacity = get_sdebug_capacity();
/* play around with geometry, don't waste too much on track 0 */
sdebug_heads = 8;
sdebug_sectors_per = 32;
if (scsi_debug_dev_size_mb >= 16)
sdebug_heads = 32;
else if (scsi_debug_dev_size_mb >= 256)
sdebug_heads = 64;
sdebug_cylinders_per = (unsigned long)sdebug_capacity /
(sdebug_sectors_per * sdebug_heads);
if (sdebug_cylinders_per >= 1024) {
/* other LLDs do this; implies >= 1GB ram disk ... */
sdebug_heads = 255;
sdebug_sectors_per = 63;
sdebug_cylinders_per = (unsigned long)sdebug_capacity /
(sdebug_sectors_per * sdebug_heads);
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (0 == scsi_debug_fake_rw) {
fake_storep = vmalloc(sz);
if (NULL == fake_storep) {
pr_err("%s: out of memory, 1\n", __func__);
return -ENOMEM;
}
memset(fake_storep, 0, sz);
if (scsi_debug_num_parts > 0)
sdebug_build_parts(fake_storep, sz);
}
if (scsi_debug_dix) {
int dif_size;
dif_size = sdebug_store_sectors * sizeof(struct sd_dif_tuple);
dif_storep = vmalloc(dif_size);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: dif_storep %u bytes @ %p\n", __func__, dif_size,
dif_storep);
if (dif_storep == NULL) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: out of mem. (DIX)\n", __func__);
ret = -ENOMEM;
goto free_vm;
}
memset(dif_storep, 0xff, dif_size);
}
/* Logical Block Provisioning */
if (scsi_debug_lbp()) {
scsi_debug_unmap_max_blocks =
clamp(scsi_debug_unmap_max_blocks, 0U, 0xffffffffU);
scsi_debug_unmap_max_desc =
clamp(scsi_debug_unmap_max_desc, 0U, 256U);
scsi_debug_unmap_granularity =
clamp(scsi_debug_unmap_granularity, 1U, 0xffffffffU);
if (scsi_debug_unmap_alignment &&
scsi_debug_unmap_granularity <=
scsi_debug_unmap_alignment) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: ERR: unmap_granularity <= unmap_alignment\n",
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
__func__);
return -EINVAL;
}
map_size = lba_to_map_index(sdebug_store_sectors - 1) + 1;
map_storep = vmalloc(BITS_TO_LONGS(map_size) * sizeof(long));
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_info("%s: %lu provisioning blocks\n", __func__, map_size);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (map_storep == NULL) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: out of mem. (MAP)\n", __func__);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
ret = -ENOMEM;
goto free_vm;
}
bitmap_zero(map_storep, map_size);
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
/* Map first 1KB for partition table */
if (scsi_debug_num_parts)
map_region(0, 2);
}
pseudo_primary = root_device_register("pseudo_0");
if (IS_ERR(pseudo_primary)) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_warn("%s: root_device_register() error\n", __func__);
ret = PTR_ERR(pseudo_primary);
goto free_vm;
}
ret = bus_register(&pseudo_lld_bus);
if (ret < 0) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_warn("%s: bus_register error: %d\n", __func__, ret);
goto dev_unreg;
}
ret = driver_register(&sdebug_driverfs_driver);
if (ret < 0) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_warn("%s: driver_register error: %d\n", __func__, ret);
goto bus_unreg;
}
host_to_add = scsi_debug_add_host;
scsi_debug_add_host = 0;
for (k = 0; k < host_to_add; k++) {
if (sdebug_add_adapter()) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_err("%s: sdebug_add_adapter failed k=%d\n",
__func__, k);
break;
}
}
if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) {
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
pr_info("%s: built %d host(s)\n", __func__,
scsi_debug_add_host);
}
return 0;
bus_unreg:
bus_unregister(&pseudo_lld_bus);
dev_unreg:
root_device_unregister(pseudo_primary);
free_vm:
[SCSI] scsi_debug: Thin provisioning support This version fixes 64-bit modulo on 32-bit as well as inadvertent map updates when TP was disabled. Implement support for thin provisioning in scsi_debug. No actual memory de-allocation is taking place. The intent is to emulate a thinly provisioned storage device, not to be one. There are four new module options: - unmap_granularity specifies the granularity at which to track mapped blocks (specified in number of logical blocks). 2048 (1 MB) is a realistic value for disk arrays although some may have a finer granularity. - unmap_alignment specifies the first LBA which is naturally aligned on an unmap_granularity boundary. - unmap_max_desc specifies the maximum number of ranges that can be unmapped using one UNMAP command. If this is 0, only WRITE SAME is supported and UNMAP will cause a check condition. - unmap_max_blocks specifies the maximum number of blocks that can be unmapped using a single UNMAP command. Default is 0xffffffff. These parameters are reported in the new and extended block limits VPD. If unmap_granularity is specified the device is tagged as thin provisioning capable in READ CAPACITY(16). A bitmap is allocated to track whether blocks are mapped or not. A WRITE request will cause a block to be mapped. So will WRITE SAME unless the UNMAP bit is set. Blocks can be unmapped using either WRITE SAME or UNMAP. No accounting is done to track partial blocks. This means that only whole blocks will be marked free. This is how the array people tell me their firmwares work. GET LBA STATUS is also supported. This command reports whether a block is mapped or not, and how long the adjoining mapped/unmapped extent is. The block allocation bitmap can also be viewed from user space via: /sys/bus/pseudo/drivers/scsi_debug/map Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2009-10-16 02:45:27 +08:00
if (map_storep)
vfree(map_storep);
if (dif_storep)
vfree(dif_storep);
vfree(fake_storep);
return ret;
}
static void __exit scsi_debug_exit(void)
{
int k = scsi_debug_add_host;
stop_all_queued();
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
free_all_queued();
for (; k; k--)
sdebug_remove_adapter();
driver_unregister(&sdebug_driverfs_driver);
bus_unregister(&pseudo_lld_bus);
root_device_unregister(pseudo_primary);
if (dif_storep)
vfree(dif_storep);
vfree(fake_storep);
}
device_initcall(scsi_debug_init);
module_exit(scsi_debug_exit);
static void sdebug_release_adapter(struct device * dev)
{
struct sdebug_host_info *sdbg_host;
sdbg_host = to_sdebug_host(dev);
kfree(sdbg_host);
}
static int sdebug_add_adapter(void)
{
int k, devs_per_host;
int error = 0;
struct sdebug_host_info *sdbg_host;
struct sdebug_dev_info *sdbg_devinfo, *tmp;
sdbg_host = kzalloc(sizeof(*sdbg_host),GFP_KERNEL);
if (NULL == sdbg_host) {
printk(KERN_ERR "%s: out of memory at line %d\n",
__func__, __LINE__);
return -ENOMEM;
}
INIT_LIST_HEAD(&sdbg_host->dev_info_list);
devs_per_host = scsi_debug_num_tgts * scsi_debug_max_luns;
for (k = 0; k < devs_per_host; k++) {
sdbg_devinfo = sdebug_device_create(sdbg_host, GFP_KERNEL);
if (!sdbg_devinfo) {
printk(KERN_ERR "%s: out of memory at line %d\n",
__func__, __LINE__);
error = -ENOMEM;
goto clean;
}
}
spin_lock(&sdebug_host_list_lock);
list_add_tail(&sdbg_host->host_list, &sdebug_host_list);
spin_unlock(&sdebug_host_list_lock);
sdbg_host->dev.bus = &pseudo_lld_bus;
sdbg_host->dev.parent = pseudo_primary;
sdbg_host->dev.release = &sdebug_release_adapter;
dev_set_name(&sdbg_host->dev, "adapter%d", scsi_debug_add_host);
error = device_register(&sdbg_host->dev);
if (error)
goto clean;
++scsi_debug_add_host;
return error;
clean:
list_for_each_entry_safe(sdbg_devinfo, tmp, &sdbg_host->dev_info_list,
dev_list) {
list_del(&sdbg_devinfo->dev_list);
kfree(sdbg_devinfo);
}
kfree(sdbg_host);
return error;
}
static void sdebug_remove_adapter(void)
{
struct sdebug_host_info * sdbg_host = NULL;
spin_lock(&sdebug_host_list_lock);
if (!list_empty(&sdebug_host_list)) {
sdbg_host = list_entry(sdebug_host_list.prev,
struct sdebug_host_info, host_list);
list_del(&sdbg_host->host_list);
}
spin_unlock(&sdebug_host_list_lock);
if (!sdbg_host)
return;
device_unregister(&sdbg_host->dev);
--scsi_debug_add_host;
}
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
static int
sdebug_change_qdepth(struct scsi_device *sdev, int qdepth)
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
{
int num_in_q = 0;
unsigned long iflags;
struct sdebug_dev_info *devip;
spin_lock_irqsave(&queued_arr_lock, iflags);
devip = (struct sdebug_dev_info *)sdev->hostdata;
if (NULL == devip) {
spin_unlock_irqrestore(&queued_arr_lock, iflags);
return -ENODEV;
}
num_in_q = atomic_read(&devip->num_in_q);
spin_unlock_irqrestore(&queued_arr_lock, iflags);
if (qdepth < 1)
qdepth = 1;
/* allow to exceed max host queued_arr elements for testing */
if (qdepth > SCSI_DEBUG_CANQUEUE + 10)
qdepth = SCSI_DEBUG_CANQUEUE + 10;
scsi_change_queue_depth(sdev, qdepth);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
if (SCSI_DEBUG_OPT_Q_NOISE & scsi_debug_opts) {
sdev_printk(KERN_INFO, sdev,
"%s: qdepth=%d, num_in_q=%d\n",
__func__, qdepth, num_in_q);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
}
return sdev->queue_depth;
}
static int
check_inject(struct scsi_cmnd *scp)
{
struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
memset(ep, 0, sizeof(struct sdebug_scmd_extra_t));
if (atomic_inc_return(&sdebug_cmnd_count) >=
abs(scsi_debug_every_nth)) {
atomic_set(&sdebug_cmnd_count, 0);
if (scsi_debug_every_nth < -1)
scsi_debug_every_nth = -1;
if (SCSI_DEBUG_OPT_TIMEOUT & scsi_debug_opts)
return 1; /* ignore command causing timeout */
else if (SCSI_DEBUG_OPT_MAC_TIMEOUT & scsi_debug_opts &&
scsi_medium_access_command(scp))
return 1; /* time out reads and writes */
if (sdebug_any_injecting_opt) {
int opts = scsi_debug_opts;
if (SCSI_DEBUG_OPT_RECOVERED_ERR & opts)
ep->inj_recovered = true;
else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & opts)
ep->inj_transport = true;
else if (SCSI_DEBUG_OPT_DIF_ERR & opts)
ep->inj_dif = true;
else if (SCSI_DEBUG_OPT_DIX_ERR & opts)
ep->inj_dix = true;
else if (SCSI_DEBUG_OPT_SHORT_TRANSFER & opts)
ep->inj_short = true;
}
}
return 0;
}
static int
scsi_debug_queuecommand(struct scsi_cmnd *scp)
{
u8 sdeb_i;
struct scsi_device *sdp = scp->device;
const struct opcode_info_t *oip;
const struct opcode_info_t *r_oip;
struct sdebug_dev_info *devip;
u8 *cmd = scp->cmnd;
int (*r_pfp)(struct scsi_cmnd *, struct sdebug_dev_info *);
int k, na;
int errsts = 0;
int errsts_no_connect = DID_NO_CONNECT << 16;
u32 flags;
u16 sa;
u8 opcode = cmd[0];
bool has_wlun_rl;
bool debug = !!(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts);
scsi_set_resid(scp, 0);
if (debug && !(SCSI_DEBUG_OPT_NO_CDB_NOISE & scsi_debug_opts)) {
char b[120];
int n, len, sb;
len = scp->cmd_len;
sb = (int)sizeof(b);
if (len > 32)
strcpy(b, "too long, over 32 bytes");
else {
for (k = 0, n = 0; k < len && n < sb; ++k)
n += scnprintf(b + n, sb - n, "%02x ",
(u32)cmd[k]);
}
sdev_printk(KERN_INFO, sdp, "%s: cmd %s\n", my_name, b);
}
has_wlun_rl = (sdp->lun == SAM2_WLUN_REPORT_LUNS);
if ((sdp->lun >= scsi_debug_max_luns) && !has_wlun_rl)
return schedule_resp(scp, NULL, errsts_no_connect, 0);
sdeb_i = opcode_ind_arr[opcode]; /* fully mapped */
oip = &opcode_info_arr[sdeb_i]; /* safe if table consistent */
devip = (struct sdebug_dev_info *)sdp->hostdata;
if (!devip) {
devip = devInfoReg(sdp);
if (NULL == devip)
return schedule_resp(scp, NULL, errsts_no_connect, 0);
}
na = oip->num_attached;
r_pfp = oip->pfp;
if (na) { /* multiple commands with this opcode */
r_oip = oip;
if (FF_SA & r_oip->flags) {
if (F_SA_LOW & oip->flags)
sa = 0x1f & cmd[1];
else
sa = get_unaligned_be16(cmd + 8);
for (k = 0; k <= na; oip = r_oip->arrp + k++) {
if (opcode == oip->opcode && sa == oip->sa)
break;
}
} else { /* since no service action only check opcode */
for (k = 0; k <= na; oip = r_oip->arrp + k++) {
if (opcode == oip->opcode)
break;
}
}
if (k > na) {
if (F_SA_LOW & r_oip->flags)
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 4);
else if (F_SA_HIGH & r_oip->flags)
mk_sense_invalid_fld(scp, SDEB_IN_CDB, 8, 7);
else
mk_sense_invalid_opcode(scp);
goto check_cond;
}
} /* else (when na==0) we assume the oip is a match */
flags = oip->flags;
if (F_INV_OP & flags) {
mk_sense_invalid_opcode(scp);
goto check_cond;
}
if (has_wlun_rl && !(F_RL_WLUN_OK & flags)) {
if (debug)
sdev_printk(KERN_INFO, sdp, "scsi_debug: Opcode: "
"0x%x not supported for wlun\n", opcode);
mk_sense_invalid_opcode(scp);
goto check_cond;
}
if (scsi_debug_strict) { /* check cdb against mask */
u8 rem;
int j;
for (k = 1; k < oip->len_mask[0] && k < 16; ++k) {
rem = ~oip->len_mask[k] & cmd[k];
if (rem) {
for (j = 7; j >= 0; --j, rem <<= 1) {
if (0x80 & rem)
break;
}
mk_sense_invalid_fld(scp, SDEB_IN_CDB, k, j);
goto check_cond;
}
}
}
if (!(F_SKIP_UA & flags) &&
SDEBUG_NUM_UAS != find_first_bit(devip->uas_bm, SDEBUG_NUM_UAS)) {
errsts = check_readiness(scp, UAS_ONLY, devip);
if (errsts)
goto check_cond;
}
if ((F_M_ACCESS & flags) && devip->stopped) {
mk_sense_buffer(scp, NOT_READY, LOGICAL_UNIT_NOT_READY, 0x2);
if (debug)
sdev_printk(KERN_INFO, sdp, "%s reports: Not ready: "
"%s\n", my_name, "initializing command "
"required");
errsts = check_condition_result;
goto fini;
}
if (scsi_debug_fake_rw && (F_FAKE_RW & flags))
goto fini;
if (scsi_debug_every_nth) {
if (check_inject(scp))
return 0; /* ignore command: make trouble */
}
if (oip->pfp) /* if this command has a resp_* function, call it */
errsts = oip->pfp(scp, devip);
else if (r_pfp) /* if leaf function ptr NULL, try the root's */
errsts = r_pfp(scp, devip);
fini:
return schedule_resp(scp, devip, errsts,
((F_DELAY_OVERR & flags) ? 0 : scsi_debug_delay));
check_cond:
return schedule_resp(scp, devip, check_condition_result, 0);
}
static int
sdebug_queuecommand_lock_or_not(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
{
if (scsi_debug_host_lock) {
unsigned long iflags;
int rc;
spin_lock_irqsave(shost->host_lock, iflags);
rc = scsi_debug_queuecommand(cmd);
spin_unlock_irqrestore(shost->host_lock, iflags);
return rc;
} else
return scsi_debug_queuecommand(cmd);
}
static struct scsi_host_template sdebug_driver_template = {
.show_info = scsi_debug_show_info,
.write_info = scsi_debug_write_info,
.proc_name = sdebug_proc_name,
.name = "SCSI DEBUG",
.info = scsi_debug_info,
.slave_alloc = scsi_debug_slave_alloc,
.slave_configure = scsi_debug_slave_configure,
.slave_destroy = scsi_debug_slave_destroy,
.ioctl = scsi_debug_ioctl,
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
.queuecommand = sdebug_queuecommand_lock_or_not,
.change_queue_depth = sdebug_change_qdepth,
.eh_abort_handler = scsi_debug_abort,
.eh_device_reset_handler = scsi_debug_device_reset,
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
.eh_target_reset_handler = scsi_debug_target_reset,
.eh_bus_reset_handler = scsi_debug_bus_reset,
.eh_host_reset_handler = scsi_debug_host_reset,
.can_queue = SCSI_DEBUG_CANQUEUE,
.this_id = 7,
.sg_tablesize = SCSI_MAX_SG_CHAIN_SEGMENTS,
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
.cmd_per_lun = DEF_CMD_PER_LUN,
.max_sectors = -1U,
.use_clustering = DISABLE_CLUSTERING,
.module = THIS_MODULE,
.track_queue_depth = 1,
.cmd_size = sizeof(struct sdebug_scmd_extra_t),
};
static int sdebug_driver_probe(struct device * dev)
{
int error = 0;
int opts;
struct sdebug_host_info *sdbg_host;
struct Scsi_Host *hpnt;
int host_prot;
sdbg_host = to_sdebug_host(dev);
sdebug_driver_template.can_queue = scsi_debug_max_queue;
if (scsi_debug_clustering)
sdebug_driver_template.use_clustering = ENABLE_CLUSTERING;
hpnt = scsi_host_alloc(&sdebug_driver_template, sizeof(sdbg_host));
if (NULL == hpnt) {
pr_err("%s: scsi_host_alloc failed\n", __func__);
error = -ENODEV;
return error;
}
sdbg_host->shost = hpnt;
*((struct sdebug_host_info **)hpnt->hostdata) = sdbg_host;
if ((hpnt->this_id >= 0) && (scsi_debug_num_tgts > hpnt->this_id))
hpnt->max_id = scsi_debug_num_tgts + 1;
else
hpnt->max_id = scsi_debug_num_tgts;
hpnt->max_lun = SAM2_WLUN_REPORT_LUNS; /* = scsi_debug_max_luns; */
host_prot = 0;
switch (scsi_debug_dif) {
case SD_DIF_TYPE1_PROTECTION:
host_prot = SHOST_DIF_TYPE1_PROTECTION;
if (scsi_debug_dix)
host_prot |= SHOST_DIX_TYPE1_PROTECTION;
break;
case SD_DIF_TYPE2_PROTECTION:
host_prot = SHOST_DIF_TYPE2_PROTECTION;
if (scsi_debug_dix)
host_prot |= SHOST_DIX_TYPE2_PROTECTION;
break;
case SD_DIF_TYPE3_PROTECTION:
host_prot = SHOST_DIF_TYPE3_PROTECTION;
if (scsi_debug_dix)
host_prot |= SHOST_DIX_TYPE3_PROTECTION;
break;
default:
if (scsi_debug_dix)
host_prot |= SHOST_DIX_TYPE0_PROTECTION;
break;
}
scsi_host_set_prot(hpnt, host_prot);
printk(KERN_INFO "scsi_debug: host protection%s%s%s%s%s%s%s\n",
(host_prot & SHOST_DIF_TYPE1_PROTECTION) ? " DIF1" : "",
(host_prot & SHOST_DIF_TYPE2_PROTECTION) ? " DIF2" : "",
(host_prot & SHOST_DIF_TYPE3_PROTECTION) ? " DIF3" : "",
(host_prot & SHOST_DIX_TYPE0_PROTECTION) ? " DIX0" : "",
(host_prot & SHOST_DIX_TYPE1_PROTECTION) ? " DIX1" : "",
(host_prot & SHOST_DIX_TYPE2_PROTECTION) ? " DIX2" : "",
(host_prot & SHOST_DIX_TYPE3_PROTECTION) ? " DIX3" : "");
if (scsi_debug_guard == 1)
scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_IP);
else
scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_CRC);
opts = scsi_debug_opts;
if (SCSI_DEBUG_OPT_RECOVERED_ERR & opts)
sdebug_any_injecting_opt = true;
else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & opts)
sdebug_any_injecting_opt = true;
else if (SCSI_DEBUG_OPT_DIF_ERR & opts)
sdebug_any_injecting_opt = true;
else if (SCSI_DEBUG_OPT_DIX_ERR & opts)
sdebug_any_injecting_opt = true;
else if (SCSI_DEBUG_OPT_SHORT_TRANSFER & opts)
sdebug_any_injecting_opt = true;
error = scsi_add_host(hpnt, &sdbg_host->dev);
if (error) {
printk(KERN_ERR "%s: scsi_add_host failed\n", __func__);
error = -ENODEV;
scsi_host_put(hpnt);
} else
scsi_scan_host(hpnt);
scsi_debug: support scsi-mq, queues and locks - add host_lock option whose default value is 0 which removes the host_lock around all queued commands - accept delay=-1 (_hi_) or -2 which use a tasklet to invoke the scsi_done callback into the mid-layer. The default is still delay=1 which uses a timer to delay 1 jiffy - wire .change_queue_depth and .change_queue_type functions to better simulate queueing in a modern LLD - add SCSI_DEBUG_OPT_Q_NOISE (0x200) mask to only produce debug output associated with queue full, plus from .change_queue_depth and .change_queue_type functions - add SCSI_DEBUG_OPT_ALL_TSF (0x400) mask which reports all queued_arr fulls at TASK_SET_FULL, otherwise SCSI_MLQUEUE_HOST_BUSY is returned - add SCSI_DEBUG_OPT_RARE_TSF (0x800) mask which works together with the every_nth option (> 0) to count occurrences of num_in_q==queue_depth. When every_nth is reached the victim (a command) yields TASK SET FULL - clean up many debug messages. - add ndelay=<nanosecs> option that uses high resolution timers; active if > 0 and then overrides delay= option - expand Unit Attention handling: POR, BUS_RESET and MODE PARAMETERS CHANGED - support .eh_target_reset_handler and drop .bios_param - add OPT_N_WCE mask so caching page yields WCE=0 - add OPT_RESET_NOISE mask to log aborts and resets - add OPT_NO_CDB_NOISE mask to not log each cdb - MODE SELECT support for changing caching page's WCE - name common ioctls in log - when fake_rw=1, do not vmalloc fake store; make UNMAP and WRITE SAME obey fake_rw - more logging and code improvements including better sense buffer handling With fio and four (pseudo) devices I have observed 1.2 M IOPS on my equipment. Rob Elliott who has done much testing and made numerous suggestions, has better IOPS results than mine. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Robert Elliott <elliott@hp.com> Tested-by: Robert Elliott <elliott@hp.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2014-07-26 23:55:35 +08:00
return error;
}
static int sdebug_driver_remove(struct device * dev)
{
struct sdebug_host_info *sdbg_host;
struct sdebug_dev_info *sdbg_devinfo, *tmp;
sdbg_host = to_sdebug_host(dev);
if (!sdbg_host) {
printk(KERN_ERR "%s: Unable to locate host info\n",
__func__);
return -ENODEV;
}
scsi_remove_host(sdbg_host->shost);
list_for_each_entry_safe(sdbg_devinfo, tmp, &sdbg_host->dev_info_list,
dev_list) {
list_del(&sdbg_devinfo->dev_list);
kfree(sdbg_devinfo);
}
scsi_host_put(sdbg_host->shost);
return 0;
}
static int pseudo_lld_bus_match(struct device *dev,
struct device_driver *dev_driver)
{
return 1;
}
static struct bus_type pseudo_lld_bus = {
.name = "pseudo",
.match = pseudo_lld_bus_match,
.probe = sdebug_driver_probe,
.remove = sdebug_driver_remove,
.drv_groups = sdebug_drv_groups,
};