OpenCloudOS-Kernel/drivers/ata/pdc_adma.c

704 lines
18 KiB
C
Raw Normal View History

/*
* pdc_adma.c - Pacific Digital Corporation ADMA
*
* Maintained by: Mark Lord <mlord@pobox.com>
*
* Copyright 2005 Mark Lord
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* libata documentation is available via 'make {ps|pdf}docs',
* as Documentation/DocBook/libata.*
*
*
* Supports ATA disks in single-packet ADMA mode.
* Uses PIO for everything else.
*
* TODO: Use ADMA transfers for ATAPI devices, when possible.
* This requires careful attention to a number of quirks of the chip.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>
#define DRV_NAME "pdc_adma"
#define DRV_VERSION "0.05"
/* macro to calculate base address for ATA regs */
#define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40))
/* macro to calculate base address for ADMA regs */
#define ADMA_REGS(base,port_no) ((base) + 0x80 + ((port_no) * 0x20))
/* macro to obtain addresses from ata_host */
#define ADMA_HOST_REGS(host,port_no) \
ADMA_REGS((host)->iomap[ADMA_MMIO_BAR], port_no)
enum {
ADMA_MMIO_BAR = 4,
ADMA_PORTS = 2,
ADMA_CPB_BYTES = 40,
ADMA_PRD_BYTES = LIBATA_MAX_PRD * 16,
ADMA_PKT_BYTES = ADMA_CPB_BYTES + ADMA_PRD_BYTES,
ADMA_DMA_BOUNDARY = 0xffffffff,
/* global register offsets */
ADMA_MODE_LOCK = 0x00c7,
/* per-channel register offsets */
ADMA_CONTROL = 0x0000, /* ADMA control */
ADMA_STATUS = 0x0002, /* ADMA status */
ADMA_CPB_COUNT = 0x0004, /* CPB count */
ADMA_CPB_CURRENT = 0x000c, /* current CPB address */
ADMA_CPB_NEXT = 0x000c, /* next CPB address */
ADMA_CPB_LOOKUP = 0x0010, /* CPB lookup table */
ADMA_FIFO_IN = 0x0014, /* input FIFO threshold */
ADMA_FIFO_OUT = 0x0016, /* output FIFO threshold */
/* ADMA_CONTROL register bits */
aNIEN = (1 << 8), /* irq mask: 1==masked */
aGO = (1 << 7), /* packet trigger ("Go!") */
aRSTADM = (1 << 5), /* ADMA logic reset */
aPIOMD4 = 0x0003, /* PIO mode 4 */
/* ADMA_STATUS register bits */
aPSD = (1 << 6),
aUIRQ = (1 << 4),
aPERR = (1 << 0),
/* CPB bits */
cDONE = (1 << 0),
cVLD = (1 << 0),
cDAT = (1 << 2),
cIEN = (1 << 3),
/* PRD bits */
pORD = (1 << 4),
pDIRO = (1 << 5),
pEND = (1 << 7),
/* ATA register flags */
rIGN = (1 << 5),
rEND = (1 << 7),
/* ATA register addresses */
ADMA_REGS_CONTROL = 0x0e,
ADMA_REGS_SECTOR_COUNT = 0x12,
ADMA_REGS_LBA_LOW = 0x13,
ADMA_REGS_LBA_MID = 0x14,
ADMA_REGS_LBA_HIGH = 0x15,
ADMA_REGS_DEVICE = 0x16,
ADMA_REGS_COMMAND = 0x17,
/* PCI device IDs */
board_1841_idx = 0, /* ADMA 2-port controller */
};
typedef enum { adma_state_idle, adma_state_pkt, adma_state_mmio } adma_state_t;
struct adma_port_priv {
u8 *pkt;
dma_addr_t pkt_dma;
adma_state_t state;
};
static int adma_ata_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t adma_intr (int irq, void *dev_instance);
static int adma_port_start(struct ata_port *ap);
static void adma_host_stop(struct ata_host *host);
static void adma_port_stop(struct ata_port *ap);
static void adma_phy_reset(struct ata_port *ap);
static void adma_qc_prep(struct ata_queued_cmd *qc);
static unsigned int adma_qc_issue(struct ata_queued_cmd *qc);
static int adma_check_atapi_dma(struct ata_queued_cmd *qc);
static void adma_bmdma_stop(struct ata_queued_cmd *qc);
static u8 adma_bmdma_status(struct ata_port *ap);
static void adma_irq_clear(struct ata_port *ap);
static void adma_eng_timeout(struct ata_port *ap);
static struct scsi_host_template adma_ata_sht = {
.module = THIS_MODULE,
.name = DRV_NAME,
.ioctl = ata_scsi_ioctl,
.queuecommand = ata_scsi_queuecmd,
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ENABLE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ADMA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
.slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
};
static const struct ata_port_operations adma_ata_ops = {
.port_disable = ata_port_disable,
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
.check_atapi_dma = adma_check_atapi_dma,
.exec_command = ata_exec_command,
.dev_select = ata_std_dev_select,
.phy_reset = adma_phy_reset,
.qc_prep = adma_qc_prep,
.qc_issue = adma_qc_issue,
.eng_timeout = adma_eng_timeout,
.data_xfer = ata_data_xfer,
.irq_handler = adma_intr,
.irq_clear = adma_irq_clear,
.irq_on = ata_irq_on,
.irq_ack = ata_irq_ack,
.port_start = adma_port_start,
.port_stop = adma_port_stop,
.host_stop = adma_host_stop,
.bmdma_stop = adma_bmdma_stop,
.bmdma_status = adma_bmdma_status,
};
static struct ata_port_info adma_port_info[] = {
/* board_1841_idx */
{
.sht = &adma_ata_sht,
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST |
ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
ATA_FLAG_PIO_POLLING,
.pio_mask = 0x10, /* pio4 */
.udma_mask = 0x1f, /* udma0-4 */
.port_ops = &adma_ata_ops,
},
};
static const struct pci_device_id adma_ata_pci_tbl[] = {
{ PCI_VDEVICE(PDC, 0x1841), board_1841_idx },
{ } /* terminate list */
};
static struct pci_driver adma_ata_pci_driver = {
.name = DRV_NAME,
.id_table = adma_ata_pci_tbl,
.probe = adma_ata_init_one,
.remove = ata_pci_remove_one,
};
static int adma_check_atapi_dma(struct ata_queued_cmd *qc)
{
return 1; /* ATAPI DMA not yet supported */
}
static void adma_bmdma_stop(struct ata_queued_cmd *qc)
{
/* nothing */
}
static u8 adma_bmdma_status(struct ata_port *ap)
{
return 0;
}
static void adma_irq_clear(struct ata_port *ap)
{
/* nothing */
}
static void adma_reset_engine(void __iomem *chan)
{
/* reset ADMA to idle state */
writew(aPIOMD4 | aNIEN | aRSTADM, chan + ADMA_CONTROL);
udelay(2);
writew(aPIOMD4, chan + ADMA_CONTROL);
udelay(2);
}
static void adma_reinit_engine(struct ata_port *ap)
{
struct adma_port_priv *pp = ap->private_data;
void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
/* mask/clear ATA interrupts */
writeb(ATA_NIEN, ap->ioaddr.ctl_addr);
ata_check_status(ap);
/* reset the ADMA engine */
adma_reset_engine(chan);
/* set in-FIFO threshold to 0x100 */
writew(0x100, chan + ADMA_FIFO_IN);
/* set CPB pointer */
writel((u32)pp->pkt_dma, chan + ADMA_CPB_NEXT);
/* set out-FIFO threshold to 0x100 */
writew(0x100, chan + ADMA_FIFO_OUT);
/* set CPB count */
writew(1, chan + ADMA_CPB_COUNT);
/* read/discard ADMA status */
readb(chan + ADMA_STATUS);
}
static inline void adma_enter_reg_mode(struct ata_port *ap)
{
void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
writew(aPIOMD4, chan + ADMA_CONTROL);
readb(chan + ADMA_STATUS); /* flush */
}
static void adma_phy_reset(struct ata_port *ap)
{
struct adma_port_priv *pp = ap->private_data;
pp->state = adma_state_idle;
adma_reinit_engine(ap);
ata_port_probe(ap);
ata_bus_reset(ap);
}
static void adma_eng_timeout(struct ata_port *ap)
{
struct adma_port_priv *pp = ap->private_data;
if (pp->state != adma_state_idle) /* healthy paranoia */
pp->state = adma_state_mmio;
adma_reinit_engine(ap);
ata_eng_timeout(ap);
}
static int adma_fill_sg(struct ata_queued_cmd *qc)
{
struct scatterlist *sg;
struct ata_port *ap = qc->ap;
struct adma_port_priv *pp = ap->private_data;
u8 *buf = pp->pkt;
int i = (2 + buf[3]) * 8;
u8 pFLAGS = pORD | ((qc->tf.flags & ATA_TFLAG_WRITE) ? pDIRO : 0);
ata_for_each_sg(sg, qc) {
u32 addr;
u32 len;
addr = (u32)sg_dma_address(sg);
*(__le32 *)(buf + i) = cpu_to_le32(addr);
i += 4;
len = sg_dma_len(sg) >> 3;
*(__le32 *)(buf + i) = cpu_to_le32(len);
i += 4;
if (ata_sg_is_last(sg, qc))
pFLAGS |= pEND;
buf[i++] = pFLAGS;
buf[i++] = qc->dev->dma_mode & 0xf;
buf[i++] = 0; /* pPKLW */
buf[i++] = 0; /* reserved */
*(__le32 *)(buf + i)
= (pFLAGS & pEND) ? 0 : cpu_to_le32(pp->pkt_dma + i + 4);
i += 4;
VPRINTK("PRD[%u] = (0x%lX, 0x%X)\n", i/4,
(unsigned long)addr, len);
}
return i;
}
static void adma_qc_prep(struct ata_queued_cmd *qc)
{
struct adma_port_priv *pp = qc->ap->private_data;
u8 *buf = pp->pkt;
u32 pkt_dma = (u32)pp->pkt_dma;
int i = 0;
VPRINTK("ENTER\n");
adma_enter_reg_mode(qc->ap);
if (qc->tf.protocol != ATA_PROT_DMA) {
ata_qc_prep(qc);
return;
}
buf[i++] = 0; /* Response flags */
buf[i++] = 0; /* reserved */
buf[i++] = cVLD | cDAT | cIEN;
i++; /* cLEN, gets filled in below */
*(__le32 *)(buf+i) = cpu_to_le32(pkt_dma); /* cNCPB */
i += 4; /* cNCPB */
i += 4; /* cPRD, gets filled in below */
buf[i++] = 0; /* reserved */
buf[i++] = 0; /* reserved */
buf[i++] = 0; /* reserved */
buf[i++] = 0; /* reserved */
/* ATA registers; must be a multiple of 4 */
buf[i++] = qc->tf.device;
buf[i++] = ADMA_REGS_DEVICE;
if ((qc->tf.flags & ATA_TFLAG_LBA48)) {
buf[i++] = qc->tf.hob_nsect;
buf[i++] = ADMA_REGS_SECTOR_COUNT;
buf[i++] = qc->tf.hob_lbal;
buf[i++] = ADMA_REGS_LBA_LOW;
buf[i++] = qc->tf.hob_lbam;
buf[i++] = ADMA_REGS_LBA_MID;
buf[i++] = qc->tf.hob_lbah;
buf[i++] = ADMA_REGS_LBA_HIGH;
}
buf[i++] = qc->tf.nsect;
buf[i++] = ADMA_REGS_SECTOR_COUNT;
buf[i++] = qc->tf.lbal;
buf[i++] = ADMA_REGS_LBA_LOW;
buf[i++] = qc->tf.lbam;
buf[i++] = ADMA_REGS_LBA_MID;
buf[i++] = qc->tf.lbah;
buf[i++] = ADMA_REGS_LBA_HIGH;
buf[i++] = 0;
buf[i++] = ADMA_REGS_CONTROL;
buf[i++] = rIGN;
buf[i++] = 0;
buf[i++] = qc->tf.command;
buf[i++] = ADMA_REGS_COMMAND | rEND;
buf[3] = (i >> 3) - 2; /* cLEN */
*(__le32 *)(buf+8) = cpu_to_le32(pkt_dma + i); /* cPRD */
i = adma_fill_sg(qc);
wmb(); /* flush PRDs and pkt to memory */
#if 0
/* dump out CPB + PRDs for debug */
{
int j, len = 0;
static char obuf[2048];
for (j = 0; j < i; ++j) {
len += sprintf(obuf+len, "%02x ", buf[j]);
if ((j & 7) == 7) {
printk("%s\n", obuf);
len = 0;
}
}
if (len)
printk("%s\n", obuf);
}
#endif
}
static inline void adma_packet_start(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
void __iomem *chan = ADMA_HOST_REGS(ap->host, ap->port_no);
VPRINTK("ENTER, ap %p\n", ap);
/* fire up the ADMA engine */
writew(aPIOMD4 | aGO, chan + ADMA_CONTROL);
}
static unsigned int adma_qc_issue(struct ata_queued_cmd *qc)
{
struct adma_port_priv *pp = qc->ap->private_data;
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
pp->state = adma_state_pkt;
adma_packet_start(qc);
return 0;
case ATA_PROT_ATAPI_DMA:
BUG();
break;
default:
break;
}
pp->state = adma_state_mmio;
return ata_qc_issue_prot(qc);
}
static inline unsigned int adma_intr_pkt(struct ata_host *host)
{
unsigned int handled = 0, port_no;
for (port_no = 0; port_no < host->n_ports; ++port_no) {
struct ata_port *ap = host->ports[port_no];
struct adma_port_priv *pp;
struct ata_queued_cmd *qc;
void __iomem *chan = ADMA_HOST_REGS(host, port_no);
u8 status = readb(chan + ADMA_STATUS);
if (status == 0)
continue;
handled = 1;
adma_enter_reg_mode(ap);
if (ap->flags & ATA_FLAG_DISABLED)
continue;
pp = ap->private_data;
if (!pp || pp->state != adma_state_pkt)
continue;
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
if ((status & (aPERR | aPSD | aUIRQ)))
qc->err_mask |= AC_ERR_OTHER;
else if (pp->pkt[0] != cDONE)
qc->err_mask |= AC_ERR_OTHER;
ata_qc_complete(qc);
}
}
return handled;
}
static inline unsigned int adma_intr_mmio(struct ata_host *host)
{
unsigned int handled = 0, port_no;
for (port_no = 0; port_no < host->n_ports; ++port_no) {
struct ata_port *ap;
ap = host->ports[port_no];
if (ap && (!(ap->flags & ATA_FLAG_DISABLED))) {
struct ata_queued_cmd *qc;
struct adma_port_priv *pp = ap->private_data;
if (!pp || pp->state != adma_state_mmio)
continue;
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
/* check main status, clearing INTRQ */
u8 status = ata_check_status(ap);
if ((status & ATA_BUSY))
continue;
DPRINTK("ata%u: protocol %d (dev_stat 0x%X)\n",
ap->print_id, qc->tf.protocol, status);
2006-08-31 12:02:15 +08:00
/* complete taskfile transaction */
pp->state = adma_state_idle;
qc->err_mask |= ac_err_mask(status);
ata_qc_complete(qc);
handled = 1;
}
}
}
return handled;
}
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static irqreturn_t adma_intr(int irq, void *dev_instance)
{
struct ata_host *host = dev_instance;
unsigned int handled = 0;
VPRINTK("ENTER\n");
spin_lock(&host->lock);
handled = adma_intr_pkt(host) | adma_intr_mmio(host);
spin_unlock(&host->lock);
VPRINTK("EXIT\n");
return IRQ_RETVAL(handled);
}
static void adma_ata_setup_port(struct ata_ioports *port, void __iomem *base)
{
port->cmd_addr =
port->data_addr = base + 0x000;
port->error_addr =
port->feature_addr = base + 0x004;
port->nsect_addr = base + 0x008;
port->lbal_addr = base + 0x00c;
port->lbam_addr = base + 0x010;
port->lbah_addr = base + 0x014;
port->device_addr = base + 0x018;
port->status_addr =
port->command_addr = base + 0x01c;
port->altstatus_addr =
port->ctl_addr = base + 0x038;
}
static int adma_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct adma_port_priv *pp;
int rc;
rc = ata_port_start(ap);
if (rc)
return rc;
adma_enter_reg_mode(ap);
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
if (!pp)
return -ENOMEM;
pp->pkt = dmam_alloc_coherent(dev, ADMA_PKT_BYTES, &pp->pkt_dma,
GFP_KERNEL);
if (!pp->pkt)
return -ENOMEM;
/* paranoia? */
if ((pp->pkt_dma & 7) != 0) {
printk("bad alignment for pp->pkt_dma: %08x\n",
(u32)pp->pkt_dma);
return -ENOMEM;
}
memset(pp->pkt, 0, ADMA_PKT_BYTES);
ap->private_data = pp;
adma_reinit_engine(ap);
return 0;
}
static void adma_port_stop(struct ata_port *ap)
{
adma_reset_engine(ADMA_HOST_REGS(ap->host, ap->port_no));
}
static void adma_host_stop(struct ata_host *host)
{
unsigned int port_no;
for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
adma_reset_engine(ADMA_HOST_REGS(host, port_no));
}
static void adma_host_init(unsigned int chip_id,
struct ata_probe_ent *probe_ent)
{
unsigned int port_no;
void __iomem *mmio_base = probe_ent->iomap[ADMA_MMIO_BAR];
/* enable/lock aGO operation */
writeb(7, mmio_base + ADMA_MODE_LOCK);
/* reset the ADMA logic */
for (port_no = 0; port_no < ADMA_PORTS; ++port_no)
adma_reset_engine(ADMA_REGS(mmio_base, port_no));
}
static int adma_set_dma_masks(struct pci_dev *pdev, void __iomem *mmio_base)
{
int rc;
rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit DMA enable failed\n");
return rc;
}
rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
if (rc) {
dev_printk(KERN_ERR, &pdev->dev,
"32-bit consistent DMA enable failed\n");
return rc;
}
return 0;
}
static int adma_ata_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
static int printed_version;
struct ata_probe_ent *probe_ent = NULL;
void __iomem *mmio_base;
unsigned int board_idx = (unsigned int) ent->driver_data;
int rc, port_no;
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
rc = pcim_enable_device(pdev);
if (rc)
return rc;
if ((pci_resource_flags(pdev, 4) & IORESOURCE_MEM) == 0)
return -ENODEV;
rc = pcim_iomap_regions(pdev, 1 << ADMA_MMIO_BAR, DRV_NAME);
if (rc)
return rc;
mmio_base = pcim_iomap_table(pdev)[ADMA_MMIO_BAR];
rc = adma_set_dma_masks(pdev, mmio_base);
if (rc)
return rc;
probe_ent = devm_kzalloc(&pdev->dev, sizeof(*probe_ent), GFP_KERNEL);
if (probe_ent == NULL)
return -ENOMEM;
probe_ent->dev = pci_dev_to_dev(pdev);
INIT_LIST_HEAD(&probe_ent->node);
probe_ent->sht = adma_port_info[board_idx].sht;
probe_ent->port_flags = adma_port_info[board_idx].flags;
probe_ent->pio_mask = adma_port_info[board_idx].pio_mask;
probe_ent->mwdma_mask = adma_port_info[board_idx].mwdma_mask;
probe_ent->udma_mask = adma_port_info[board_idx].udma_mask;
probe_ent->port_ops = adma_port_info[board_idx].port_ops;
probe_ent->irq = pdev->irq;
probe_ent->irq_flags = IRQF_SHARED;
probe_ent->n_ports = ADMA_PORTS;
probe_ent->iomap = pcim_iomap_table(pdev);
for (port_no = 0; port_no < probe_ent->n_ports; ++port_no) {
adma_ata_setup_port(&probe_ent->port[port_no],
ADMA_ATA_REGS(mmio_base, port_no));
}
pci_set_master(pdev);
/* initialize adapter */
adma_host_init(board_idx, probe_ent);
if (!ata_device_add(probe_ent))
return -ENODEV;
devm_kfree(&pdev->dev, probe_ent);
return 0;
}
static int __init adma_ata_init(void)
{
return pci_register_driver(&adma_ata_pci_driver);
}
static void __exit adma_ata_exit(void)
{
pci_unregister_driver(&adma_ata_pci_driver);
}
MODULE_AUTHOR("Mark Lord");
MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl);
MODULE_VERSION(DRV_VERSION);
module_init(adma_ata_init);
module_exit(adma_ata_exit);