OpenCloudOS-Kernel/arch/arm/mach-omap2/omap_hwmod_2420_data.c

626 lines
15 KiB
C
Raw Normal View History

/*
* omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips
*
* Copyright (C) 2009-2011 Nokia Corporation
* Copyright (C) 2012 Texas Instruments, Inc.
* Paul Walmsley
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* XXX handle crossbar/shared link difference for L3?
* XXX these should be marked initdata for multi-OMAP kernels
*/
#include <linux/i2c-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-01 00:41:50 +08:00
#include <linux/omap-dma.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
#include "l3_2xxx.h"
#include "l4_2xxx.h"
#include "omap_hwmod_common_data.h"
#include "cm-regbits-24xx.h"
#include "prm-regbits-24xx.h"
#include "i2c.h"
#include "mmc.h"
#include "serial.h"
OMAP2+: wd_timer: disable on boot via hwmod postsetup mechanism The OMAP watchdog timer IP blocks require a specific set of register writes to occur before they will be disabled[1], even if the device clocks appear to be disabled in the CM_*CLKEN registers. In the MPU watchdog case, failure to execute this reset sequence will eventually cause the watchdog to reset the OMAP unexpectedly. Previously, the code to disable this watchdog was manually called from mach-omap2/devices.c during device initialization. This causes the watchdog to be unconditionally disabled for a portion of kernel initialization. This should be controllable by the board-*.c files, since some system integrators will want full watchdog coverage of kernel initialization. Also, the watchdog disable code was not connected to the hwmod shutdown code. This means that calling omap_hwmod_shutdown() will not, in fact, disable the watchdog, and the goal of omap_hwmod_shutdown() is to be able to shutdown any on-chip OMAP device. To resolve the latter problem, populate the pre_shutdown pointer in the watchdog timer hwmod classes with a function that executes the watchdog shutdown sequence. This allows the hwmod code to fully disable the watchdog. Then, to allow some board files to support watchdog coverage throughout kernel initialization, add common code to mach-omap2/io.c to cause the MPU watchdog to be disabled on boot unless a board file specifically requests it to remain enabled. Board files can do this by changing the watchdog timer hwmod's postsetup state between the omap2_init_common_infrastructure() and omap2_init_common_devices() function calls. 1. OMAP34xx Multimedia Device Silicon Revision 3.1.x Rev. ZH [SWPU222H], Section 16.4.3.6, "Start/Stop Sequence for WDTs (Using WDTi.WSPR Register)" Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Benoît Cousson <b-cousson@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Charulatha Varadarajan <charu@ti.com>
2010-12-22 06:39:15 +08:00
#include "wd_timer.h"
/*
* OMAP2420 hardware module integration data
*
* All of the data in this section should be autogeneratable from the
* TI hardware database or other technical documentation. Data that
* is driver-specific or driver-kernel integration-specific belongs
* elsewhere.
*/
/*
* IP blocks
*/
/* IVA1 (IVA1) */
static struct omap_hwmod_class iva1_hwmod_class = {
.name = "iva1",
};
static struct omap_hwmod_rst_info omap2420_iva_resets[] = {
{ .name = "iva", .rst_shift = 8 },
};
static struct omap_hwmod omap2420_iva_hwmod = {
.name = "iva",
.class = &iva1_hwmod_class,
.clkdm_name = "iva1_clkdm",
.rst_lines = omap2420_iva_resets,
.rst_lines_cnt = ARRAY_SIZE(omap2420_iva_resets),
.main_clk = "iva1_ifck",
};
/* DSP */
static struct omap_hwmod_class dsp_hwmod_class = {
.name = "dsp",
};
static struct omap_hwmod_rst_info omap2420_dsp_resets[] = {
{ .name = "logic", .rst_shift = 0 },
{ .name = "mmu", .rst_shift = 1 },
};
static struct omap_hwmod omap2420_dsp_hwmod = {
.name = "dsp",
.class = &dsp_hwmod_class,
.clkdm_name = "dsp_clkdm",
.rst_lines = omap2420_dsp_resets,
.rst_lines_cnt = ARRAY_SIZE(omap2420_dsp_resets),
.main_clk = "dsp_fck",
};
/* I2C common */
static struct omap_hwmod_class_sysconfig i2c_sysc = {
.rev_offs = 0x00,
.sysc_offs = 0x20,
.syss_offs = 0x10,
.sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class i2c_class = {
.name = "i2c",
.sysc = &i2c_sysc,
.rev = OMAP_I2C_IP_VERSION_1,
.reset = &omap_i2c_reset,
};
static struct omap_i2c_dev_attr i2c_dev_attr = {
.flags = OMAP_I2C_FLAG_NO_FIFO |
OMAP_I2C_FLAG_SIMPLE_CLOCK |
OMAP_I2C_FLAG_16BIT_DATA_REG |
OMAP_I2C_FLAG_BUS_SHIFT_2,
};
/* I2C1 */
static struct omap_hwmod omap2420_i2c1_hwmod = {
.name = "i2c1",
.mpu_irqs = omap2_i2c1_mpu_irqs,
.sdma_reqs = omap2_i2c1_sdma_reqs,
.main_clk = "i2c1_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP2420_EN_I2C1_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP2420_ST_I2C1_SHIFT,
},
},
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
/*
* From mach-omap2/pm24xx.c: "Putting MPU into the WFI state
* while a transfer is active seems to cause the I2C block to
* timeout. Why? Good question."
*/
.flags = (HWMOD_16BIT_REG | HWMOD_BLOCK_WFI),
};
/* I2C2 */
static struct omap_hwmod omap2420_i2c2_hwmod = {
.name = "i2c2",
.mpu_irqs = omap2_i2c2_mpu_irqs,
.sdma_reqs = omap2_i2c2_sdma_reqs,
.main_clk = "i2c2_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP2420_EN_I2C2_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP2420_ST_I2C2_SHIFT,
},
},
.class = &i2c_class,
.dev_attr = &i2c_dev_attr,
.flags = HWMOD_16BIT_REG,
};
/* dma attributes */
static struct omap_dma_dev_attr dma_dev_attr = {
.dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY |
IS_CSSA_32 | IS_CDSA_32,
.lch_count = 32,
};
static struct omap_hwmod omap2420_dma_system_hwmod = {
.name = "dma",
.class = &omap2xxx_dma_hwmod_class,
.mpu_irqs = omap2_dma_system_irqs,
.main_clk = "core_l3_ck",
.dev_attr = &dma_dev_attr,
.flags = HWMOD_NO_IDLEST,
};
/* mailbox */
static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = {
{ .name = "dsp", .irq = 26 + OMAP_INTC_START, },
{ .name = "iva", .irq = 34 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2420_mailbox_hwmod = {
.name = "mailbox",
.class = &omap2xxx_mailbox_hwmod_class,
.mpu_irqs = omap2420_mailbox_irqs,
.main_clk = "mailboxes_ick",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
.module_bit = OMAP24XX_EN_MAILBOXES_SHIFT,
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_ST_MAILBOXES_SHIFT,
},
},
};
/*
* 'mcbsp' class
* multi channel buffered serial port controller
*/
static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = {
.name = "mcbsp",
};
static struct omap_hwmod_opt_clk mcbsp_opt_clks[] = {
{ .role = "pad_fck", .clk = "mcbsp_clks" },
{ .role = "prcm_fck", .clk = "func_96m_ck" },
};
/* mcbsp1 */
static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = {
{ .name = "tx", .irq = 59 + OMAP_INTC_START, },
{ .name = "rx", .irq = 60 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2420_mcbsp1_hwmod = {
.name = "mcbsp1",
.class = &omap2420_mcbsp_hwmod_class,
.mpu_irqs = omap2420_mcbsp1_irqs,
.sdma_reqs = omap2_mcbsp1_sdma_reqs,
.main_clk = "mcbsp1_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
.module_bit = OMAP24XX_EN_MCBSP1_SHIFT,
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_ST_MCBSP1_SHIFT,
},
},
.opt_clks = mcbsp_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
};
/* mcbsp2 */
static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = {
{ .name = "tx", .irq = 62 + OMAP_INTC_START, },
{ .name = "rx", .irq = 63 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod omap2420_mcbsp2_hwmod = {
.name = "mcbsp2",
.class = &omap2420_mcbsp_hwmod_class,
.mpu_irqs = omap2420_mcbsp2_irqs,
.sdma_reqs = omap2_mcbsp2_sdma_reqs,
.main_clk = "mcbsp2_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
.module_bit = OMAP24XX_EN_MCBSP2_SHIFT,
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_ST_MCBSP2_SHIFT,
},
},
.opt_clks = mcbsp_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(mcbsp_opt_clks),
};
static struct omap_hwmod_class_sysconfig omap2420_msdi_sysc = {
.rev_offs = 0x3c,
.sysc_offs = 0x64,
.syss_offs = 0x68,
.sysc_flags = (SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
.sysc_fields = &omap_hwmod_sysc_type1,
};
static struct omap_hwmod_class omap2420_msdi_hwmod_class = {
.name = "msdi",
.sysc = &omap2420_msdi_sysc,
.reset = &omap_msdi_reset,
};
/* msdi1 */
static struct omap_hwmod_irq_info omap2420_msdi1_irqs[] = {
{ .irq = 83 + OMAP_INTC_START, },
{ .irq = -1 },
};
static struct omap_hwmod_dma_info omap2420_msdi1_sdma_reqs[] = {
{ .name = "tx", .dma_req = 61 }, /* OMAP24XX_DMA_MMC1_TX */
{ .name = "rx", .dma_req = 62 }, /* OMAP24XX_DMA_MMC1_RX */
{ .dma_req = -1 }
};
static struct omap_hwmod omap2420_msdi1_hwmod = {
.name = "msdi1",
.class = &omap2420_msdi_hwmod_class,
.mpu_irqs = omap2420_msdi1_irqs,
.sdma_reqs = omap2420_msdi1_sdma_reqs,
.main_clk = "mmc_fck",
.prcm = {
.omap2 = {
.prcm_reg_id = 1,
.module_bit = OMAP2420_EN_MMC_SHIFT,
.module_offs = CORE_MOD,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP2420_ST_MMC_SHIFT,
},
},
.flags = HWMOD_16BIT_REG,
};
/* HDQ1W/1-wire */
static struct omap_hwmod omap2420_hdq1w_hwmod = {
.name = "hdq1w",
.mpu_irqs = omap2_hdq1w_mpu_irqs,
.main_clk = "hdq_fck",
.prcm = {
.omap2 = {
.module_offs = CORE_MOD,
.prcm_reg_id = 1,
.module_bit = OMAP24XX_EN_HDQ_SHIFT,
.idlest_reg_id = 1,
.idlest_idle_bit = OMAP24XX_ST_HDQ_SHIFT,
},
},
.class = &omap2_hdq1w_class,
};
/*
* interfaces
*/
/* L4 CORE -> I2C1 interface */
static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_i2c1_hwmod,
.clk = "i2c1_ick",
.addr = omap2_i2c1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* L4 CORE -> I2C2 interface */
static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_i2c2_hwmod,
.clk = "i2c2_ick",
.addr = omap2_i2c2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* IVA <- L3 interface */
static struct omap_hwmod_ocp_if omap2420_l3__iva = {
.master = &omap2xxx_l3_main_hwmod,
.slave = &omap2420_iva_hwmod,
.clk = "core_l3_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* DSP <- L3 interface */
static struct omap_hwmod_ocp_if omap2420_l3__dsp = {
.master = &omap2xxx_l3_main_hwmod,
.slave = &omap2420_dsp_hwmod,
.clk = "dsp_ick",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = {
{
.pa_start = 0x48028000,
.pa_end = 0x48028000 + SZ_1K - 1,
.flags = ADDR_TYPE_RT
},
{ }
};
/* l4_wkup -> timer1 */
static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_timer1_hwmod,
.clk = "gpt1_ick",
.addr = omap2420_timer1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> wd_timer2 */
static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = {
{
.pa_start = 0x48022000,
.pa_end = 0x4802207f,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_wd_timer2_hwmod,
.clk = "mpu_wdt_ick",
.addr = omap2420_wd_timer2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio1 */
static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = {
{
.pa_start = 0x48018000,
.pa_end = 0x480181ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio1_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio1_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio2 */
static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = {
{
.pa_start = 0x4801a000,
.pa_end = 0x4801a1ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio2_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio2_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio3 */
static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = {
{
.pa_start = 0x4801c000,
.pa_end = 0x4801c1ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio3_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio3_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_wkup -> gpio4 */
static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = {
{
.pa_start = 0x4801e000,
.pa_end = 0x4801e1ff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_gpio4_hwmod,
.clk = "gpios_ick",
.addr = omap2420_gpio4_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* dma_system -> L3 */
static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = {
.master = &omap2420_dma_system_hwmod,
.slave = &omap2xxx_l3_main_hwmod,
.clk = "core_l3_ck",
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> dma_system */
static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_dma_system_hwmod,
.clk = "sdma_ick",
.addr = omap2_dma_system_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> mailbox */
static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_mailbox_hwmod,
.addr = omap2_mailbox_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> mcbsp1 */
static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_mcbsp1_hwmod,
.clk = "mcbsp1_ick",
.addr = omap2_mcbsp1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> mcbsp2 */
static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_mcbsp2_hwmod,
.clk = "mcbsp2_ick",
.addr = omap2xxx_mcbsp2_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_addr_space omap2420_msdi1_addrs[] = {
{
.pa_start = 0x4809c000,
.pa_end = 0x4809c000 + SZ_128 - 1,
.flags = ADDR_TYPE_RT,
},
{ }
};
/* l4_core -> msdi1 */
static struct omap_hwmod_ocp_if omap2420_l4_core__msdi1 = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_msdi1_hwmod,
.clk = "mmc_ick",
.addr = omap2420_msdi1_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
/* l4_core -> hdq1w interface */
static struct omap_hwmod_ocp_if omap2420_l4_core__hdq1w = {
.master = &omap2xxx_l4_core_hwmod,
.slave = &omap2420_hdq1w_hwmod,
.clk = "hdq_ick",
.addr = omap2_hdq1w_addr_space,
.user = OCP_USER_MPU | OCP_USER_SDMA,
.flags = OMAP_FIREWALL_L4 | OCPIF_SWSUP_IDLE,
};
/* l4_wkup -> 32ksync_counter */
static struct omap_hwmod_addr_space omap2420_counter_32k_addrs[] = {
{
.pa_start = 0x48004000,
.pa_end = 0x4800401f,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_addr_space omap2420_gpmc_addrs[] = {
{
.pa_start = 0x6800a000,
.pa_end = 0x6800afff,
.flags = ADDR_TYPE_RT
},
{ }
};
static struct omap_hwmod_ocp_if omap2420_l4_wkup__counter_32k = {
.master = &omap2xxx_l4_wkup_hwmod,
.slave = &omap2xxx_counter_32k_hwmod,
.clk = "sync_32k_ick",
.addr = omap2420_counter_32k_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap2420_l3__gpmc = {
.master = &omap2xxx_l3_main_hwmod,
.slave = &omap2xxx_gpmc_hwmod,
.clk = "core_l3_ck",
.addr = omap2420_gpmc_addrs,
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if *omap2420_hwmod_ocp_ifs[] __initdata = {
&omap2xxx_l3_main__l4_core,
&omap2xxx_mpu__l3_main,
&omap2xxx_dss__l3,
&omap2xxx_l4_core__mcspi1,
&omap2xxx_l4_core__mcspi2,
&omap2xxx_l4_core__l4_wkup,
&omap2_l4_core__uart1,
&omap2_l4_core__uart2,
&omap2_l4_core__uart3,
&omap2420_l4_core__i2c1,
&omap2420_l4_core__i2c2,
&omap2420_l3__iva,
&omap2420_l3__dsp,
&omap2420_l4_wkup__timer1,
&omap2xxx_l4_core__timer2,
&omap2xxx_l4_core__timer3,
&omap2xxx_l4_core__timer4,
&omap2xxx_l4_core__timer5,
&omap2xxx_l4_core__timer6,
&omap2xxx_l4_core__timer7,
&omap2xxx_l4_core__timer8,
&omap2xxx_l4_core__timer9,
&omap2xxx_l4_core__timer10,
&omap2xxx_l4_core__timer11,
&omap2xxx_l4_core__timer12,
&omap2420_l4_wkup__wd_timer2,
&omap2xxx_l4_core__dss,
&omap2xxx_l4_core__dss_dispc,
&omap2xxx_l4_core__dss_rfbi,
&omap2xxx_l4_core__dss_venc,
&omap2420_l4_wkup__gpio1,
&omap2420_l4_wkup__gpio2,
&omap2420_l4_wkup__gpio3,
&omap2420_l4_wkup__gpio4,
&omap2420_dma_system__l3,
&omap2420_l4_core__dma_system,
&omap2420_l4_core__mailbox,
&omap2420_l4_core__mcbsp1,
&omap2420_l4_core__mcbsp2,
&omap2420_l4_core__msdi1,
&omap2xxx_l4_core__rng,
&omap2xxx_l4_core__sham,
&omap2xxx_l4_core__aes,
&omap2420_l4_core__hdq1w,
&omap2420_l4_wkup__counter_32k,
&omap2420_l3__gpmc,
NULL,
};
int __init omap2420_hwmod_init(void)
{
omap_hwmod_init();
return omap_hwmod_register_links(omap2420_hwmod_ocp_ifs);
}