OpenCloudOS-Kernel/arch/arc/Makefile

122 lines
3.4 KiB
Makefile
Raw Normal View History

# SPDX-License-Identifier: GPL-2.0-only
#
# Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
#
KBUILD_DEFCONFIG := haps_hs_smp_defconfig
2019-06-03 14:31:19 +08:00
ifeq ($(CROSS_COMPILE),)
CROSS_COMPILE := $(call cc-cross-prefix, arc-linux- arceb-linux-)
endif
ARC: Explicitly add -mmedium-calls to CFLAGS GCC built for arc*-*-linux has "-mmedium-calls" implicitly enabled by default thus we don't see any problems during Linux kernel compilation. ----------------------------->8------------------------ arc-linux-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [enabled] ----------------------------->8------------------------ But if we try to use so-called Elf32 toolchain with GCC configured for arc*-*-elf* then we'd see the following failure: ----------------------------->8------------------------ init/do_mounts.o: In function 'init_rootfs': do_mounts.c:(.init.text+0x108): relocation truncated to fit: R_ARC_S21W_PCREL against symbol 'unregister_filesystem' defined in .text section in fs/filesystems.o arc-elf32-ld: final link failed: Symbol needs debug section which does not exist make: *** [vmlinux] Error 1 ----------------------------->8------------------------ That happens because neither "-mmedium-calls" nor "-mlong-calls" are enabled in Elf32 GCC: ----------------------------->8------------------------ arc-elf32-gcc -mcpu=arc700 -Q --help=target | grep calls -mlong-calls [disabled] -mmedium-calls [disabled] ----------------------------->8------------------------ Now to make it possible to use Elf32 toolchain for building Linux kernel we're explicitly add "-mmedium-calls" to CFLAGS. And since we add "-mmedium-calls" to the global CFLAGS there's no point in having per-file copies thus removing them. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2018-06-01 19:34:33 +08:00
cflags-y += -fno-common -pipe -fno-builtin -mmedium-calls -D__linux__
tune-mcpu-def-$(CONFIG_ISA_ARCOMPACT) := -mcpu=arc700
tune-mcpu-def-$(CONFIG_ISA_ARCV2) := -mcpu=hs38
ifeq ($(CONFIG_ARC_TUNE_MCPU),"")
cflags-y += $(tune-mcpu-def-y)
else
tune-mcpu := $(shell echo $(CONFIG_ARC_TUNE_MCPU))
tune-mcpu-ok := $(call cc-option-yn, $(tune-mcpu))
ifeq ($(tune-mcpu-ok),y)
cflags-y += $(tune-mcpu)
else
# The flag provided by 'CONFIG_ARC_TUNE_MCPU' option isn't known by this compiler
# (probably the compiler is too old). Use ISA default mcpu flag instead as a safe option.
$(warning ** WARNING ** CONFIG_ARC_TUNE_MCPU flag '$(tune-mcpu)' is unknown, fallback to '$(tune-mcpu-def-y)')
cflags-y += $(tune-mcpu-def-y)
endif
endif
ifdef CONFIG_ARC_CURR_IN_REG
# For a global register definition, make sure it gets passed to every file
# We had a customer reported bug where some code built in kernel was NOT using
# any kernel headers, and missing the r25 global register
# Can't do unconditionally because of recursive include issues
# due to <linux/thread_info.h>
LINUXINCLUDE += -include $(srctree)/arch/arc/include/asm/current.h
endif
cflags-y += -fsection-anchors
cflags-$(CONFIG_ARC_HAS_LLSC) += -mlock
cflags-$(CONFIG_ARC_HAS_SWAPE) += -mswape
ifdef CONFIG_ISA_ARCV2
ifdef CONFIG_ARC_USE_UNALIGNED_MEM_ACCESS
cflags-y += -munaligned-access
else
cflags-y += -mno-unaligned-access
endif
ifndef CONFIG_ARC_HAS_LL64
cflags-y += -mno-ll64
endif
ifndef CONFIG_ARC_HAS_DIV_REM
cflags-y += -mno-div-rem
endif
endif
cfi := $(call as-instr,.cfi_startproc\n.cfi_endproc,-DARC_DW2_UNWIND_AS_CFI)
cflags-$(CONFIG_ARC_DW2_UNWIND) += -fasynchronous-unwind-tables $(cfi)
# small data is default for elf32 tool-chain. If not usable, disable it
# This also allows repurposing GP as scratch reg to gcc reg allocator
disable_small_data := y
cflags-$(disable_small_data) += -mno-sdata -fcall-used-gp
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mbig-endian
ldflags-$(CONFIG_CPU_BIG_ENDIAN) += -EB
LIBGCC = $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
# Modules with short calls might break for calls into builtin-kernel
KBUILD_CFLAGS_MODULE += -mlong-calls -mno-millicode
# Finally dump eveything into kernel build system
KBUILD_CFLAGS += $(cflags-y)
KBUILD_AFLAGS += $(KBUILD_CFLAGS)
KBUILD_LDFLAGS += $(ldflags-y)
head-y := arch/arc/kernel/head.o
# See arch/arc/Kbuild for content of core part of the kernel
core-y += arch/arc/
# w/o this dtb won't embed into kernel binary
core-y += arch/arc/boot/dts/
core-y += arch/arc/plat-sim/
core-$(CONFIG_ARC_PLAT_TB10X) += arch/arc/plat-tb10x/
core-$(CONFIG_ARC_PLAT_AXS10X) += arch/arc/plat-axs10x/
core-$(CONFIG_ARC_SOC_HSDK) += arch/arc/plat-hsdk/
libs-y += arch/arc/lib/ $(LIBGCC)
boot := arch/arc/boot
ARC: build: move symlink creation to arch/arc/Makefile to avoid race If you run 'make uImage uImage.gz' with the parallel option, uImage.gz will be created by two threads simultaneously. This is because arch/arc/Makefile does not specify the dependency between uImage and uImage.gz. Hence, GNU Make assumes they can be built in parallel. One thread descends into arch/arc/boot/ to create uImage, and another to create uImage.gz. Please notice the same log is displayed twice in the following steps: $ export CROSS_COMPILE=<your-arc-compiler-prefix> $ make -s ARCH=arc defconfig $ make -j$(nproc) ARCH=arc uImage uImage.gz [ snip ] LD vmlinux SORTTAB vmlinux SYSMAP System.map OBJCOPY arch/arc/boot/vmlinux.bin OBJCOPY arch/arc/boot/vmlinux.bin GZIP arch/arc/boot/vmlinux.bin.gz GZIP arch/arc/boot/vmlinux.bin.gz UIMAGE arch/arc/boot/uImage.gz UIMAGE arch/arc/boot/uImage.gz Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2109376 Bytes = 2059.94 KiB = 2.01 MiB Load Address: 80000000 Entry Point: 80004000 Image arch/arc/boot/uImage is ready Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2815455 Bytes = 2749.47 KiB = 2.69 MiB Load Address: 80000000 Entry Point: 80004000 This is a race between the two threads trying to write to the same file arch/arc/boot/uImage.gz. This is a potential problem that can generate a broken file. I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images"). I highly recommend to avoid such build rules that cause a race condition. Move the uImage rule to arch/arc/Makefile. Another strangeness is that arch/arc/boot/Makefile compares the timestamps between $(obj)/uImage and $(obj)/uImage.*: $(obj)/uImage: $(obj)/uImage.$(suffix-y) @ln -sf $(notdir $<) $@ @echo ' Image $@ is ready' This does not work as expected since $(obj)/uImage is a symlink. The symlink should be created in a phony target rule. I used $(kecho) instead of echo to suppress the message 'Image arch/arc/boot/uImage is ready' when the -s option is given. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-11-22 03:36:55 +08:00
boot_targets := uImage.bin uImage.gz uImage.lzma
PHONY += $(boot_targets)
$(boot_targets): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
ARC: build: move symlink creation to arch/arc/Makefile to avoid race If you run 'make uImage uImage.gz' with the parallel option, uImage.gz will be created by two threads simultaneously. This is because arch/arc/Makefile does not specify the dependency between uImage and uImage.gz. Hence, GNU Make assumes they can be built in parallel. One thread descends into arch/arc/boot/ to create uImage, and another to create uImage.gz. Please notice the same log is displayed twice in the following steps: $ export CROSS_COMPILE=<your-arc-compiler-prefix> $ make -s ARCH=arc defconfig $ make -j$(nproc) ARCH=arc uImage uImage.gz [ snip ] LD vmlinux SORTTAB vmlinux SYSMAP System.map OBJCOPY arch/arc/boot/vmlinux.bin OBJCOPY arch/arc/boot/vmlinux.bin GZIP arch/arc/boot/vmlinux.bin.gz GZIP arch/arc/boot/vmlinux.bin.gz UIMAGE arch/arc/boot/uImage.gz UIMAGE arch/arc/boot/uImage.gz Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2109376 Bytes = 2059.94 KiB = 2.01 MiB Load Address: 80000000 Entry Point: 80004000 Image arch/arc/boot/uImage is ready Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2815455 Bytes = 2749.47 KiB = 2.69 MiB Load Address: 80000000 Entry Point: 80004000 This is a race between the two threads trying to write to the same file arch/arc/boot/uImage.gz. This is a potential problem that can generate a broken file. I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1: add boot image dependencies to not generate invalid images"). I highly recommend to avoid such build rules that cause a race condition. Move the uImage rule to arch/arc/Makefile. Another strangeness is that arch/arc/boot/Makefile compares the timestamps between $(obj)/uImage and $(obj)/uImage.*: $(obj)/uImage: $(obj)/uImage.$(suffix-y) @ln -sf $(notdir $<) $@ @echo ' Image $@ is ready' This does not work as expected since $(obj)/uImage is a symlink. The symlink should be created in a phony target rule. I used $(kecho) instead of echo to suppress the message 'Image arch/arc/boot/uImage is ready' when the -s option is given. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2020-11-22 03:36:55 +08:00
uimage-default-y := uImage.bin
uimage-default-$(CONFIG_KERNEL_GZIP) := uImage.gz
uimage-default-$(CONFIG_KERNEL_LZMA) := uImage.lzma
PHONY += uImage
uImage: $(uimage-default-y)
@ln -sf $< $(boot)/uImage
@$(kecho) ' Image $(boot)/uImage is ready'
CLEAN_FILES += $(boot)/uImage
archclean:
$(Q)$(MAKE) $(clean)=$(boot)