2019-06-04 16:11:33 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-only
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2008 Ilya Yanok, Emcraft Systems
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/irq.h>
|
2013-09-26 20:40:04 +08:00
|
|
|
#include <linux/of_address.h>
|
|
|
|
#include <linux/of_irq.h>
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
#include <linux/of_platform.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The FPGA supports 9 interrupt sources, which can be routed to 3
|
|
|
|
* interrupt request lines of the MPIC. The line to be used can be
|
|
|
|
* specified through the third cell of FDT property "interrupts".
|
|
|
|
*/
|
|
|
|
|
|
|
|
#define SOCRATES_FPGA_NUM_IRQS 9
|
|
|
|
|
|
|
|
#define FPGA_PIC_IRQCFG (0x0)
|
|
|
|
#define FPGA_PIC_IRQMASK(n) (0x4 + 0x4 * (n))
|
|
|
|
|
|
|
|
#define SOCRATES_FPGA_IRQ_MASK ((1 << SOCRATES_FPGA_NUM_IRQS) - 1)
|
|
|
|
|
|
|
|
struct socrates_fpga_irq_info {
|
|
|
|
unsigned int irq_line;
|
|
|
|
int type;
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Interrupt routing and type table
|
|
|
|
*
|
|
|
|
* IRQ_TYPE_NONE means the interrupt type is configurable,
|
|
|
|
* otherwise it's fixed to the specified value.
|
|
|
|
*/
|
|
|
|
static struct socrates_fpga_irq_info fpga_irqs[SOCRATES_FPGA_NUM_IRQS] = {
|
|
|
|
[0] = {0, IRQ_TYPE_NONE},
|
|
|
|
[1] = {0, IRQ_TYPE_LEVEL_HIGH},
|
|
|
|
[2] = {0, IRQ_TYPE_LEVEL_LOW},
|
|
|
|
[3] = {0, IRQ_TYPE_NONE},
|
|
|
|
[4] = {0, IRQ_TYPE_NONE},
|
|
|
|
[5] = {0, IRQ_TYPE_NONE},
|
|
|
|
[6] = {0, IRQ_TYPE_NONE},
|
|
|
|
[7] = {0, IRQ_TYPE_NONE},
|
|
|
|
[8] = {0, IRQ_TYPE_LEVEL_HIGH},
|
|
|
|
};
|
|
|
|
|
2010-02-18 21:45:12 +08:00
|
|
|
static DEFINE_RAW_SPINLOCK(socrates_fpga_pic_lock);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
|
|
|
|
static void __iomem *socrates_fpga_pic_iobase;
|
2012-02-15 05:06:50 +08:00
|
|
|
static struct irq_domain *socrates_fpga_pic_irq_host;
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
static unsigned int socrates_fpga_irqs[3];
|
|
|
|
|
|
|
|
static inline uint32_t socrates_fpga_pic_read(int reg)
|
|
|
|
{
|
|
|
|
return in_be32(socrates_fpga_pic_iobase + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void socrates_fpga_pic_write(int reg, uint32_t val)
|
|
|
|
{
|
|
|
|
out_be32(socrates_fpga_pic_iobase + reg, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned int socrates_fpga_pic_get_irq(unsigned int irq)
|
|
|
|
{
|
|
|
|
uint32_t cause;
|
|
|
|
unsigned long flags;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* Check irq line routed to the MPIC */
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
|
|
if (irq == socrates_fpga_irqs[i])
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (i == 3)
|
2016-09-06 19:53:24 +08:00
|
|
|
return 0;
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
cause = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(i));
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
for (i = SOCRATES_FPGA_NUM_IRQS - 1; i >= 0; i--) {
|
|
|
|
if (cause >> (i + 16))
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return irq_linear_revmap(socrates_fpga_pic_irq_host,
|
|
|
|
(irq_hw_number_t)i);
|
|
|
|
}
|
|
|
|
|
2015-09-14 16:42:37 +08:00
|
|
|
static void socrates_fpga_pic_cascade(struct irq_desc *desc)
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
{
|
2011-03-25 23:45:20 +08:00
|
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
2015-09-14 16:13:42 +08:00
|
|
|
unsigned int irq = irq_desc_get_irq(desc);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
unsigned int cascade_irq;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* See if we actually have an interrupt, call generic handling code if
|
|
|
|
* we do.
|
|
|
|
*/
|
|
|
|
cascade_irq = socrates_fpga_pic_get_irq(irq);
|
|
|
|
|
2016-09-06 19:53:24 +08:00
|
|
|
if (cascade_irq)
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
generic_handle_irq(cascade_irq);
|
2011-03-07 21:59:19 +08:00
|
|
|
chip->irq_eoi(&desc->irq_data);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
}
|
|
|
|
|
2011-03-07 21:59:19 +08:00
|
|
|
static void socrates_fpga_pic_ack(struct irq_data *d)
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
{
|
|
|
|
unsigned long flags;
|
2011-05-04 13:02:15 +08:00
|
|
|
unsigned int irq_line, hwirq = irqd_to_hwirq(d);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
uint32_t mask;
|
|
|
|
|
|
|
|
irq_line = fpga_irqs[hwirq].irq_line;
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
|
|
|
|
& SOCRATES_FPGA_IRQ_MASK;
|
|
|
|
mask |= (1 << (hwirq + 16));
|
|
|
|
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
}
|
|
|
|
|
2011-03-07 21:59:19 +08:00
|
|
|
static void socrates_fpga_pic_mask(struct irq_data *d)
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
{
|
|
|
|
unsigned long flags;
|
2011-05-04 13:02:15 +08:00
|
|
|
unsigned int hwirq = irqd_to_hwirq(d);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
int irq_line;
|
|
|
|
u32 mask;
|
|
|
|
|
|
|
|
irq_line = fpga_irqs[hwirq].irq_line;
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
|
|
|
|
& SOCRATES_FPGA_IRQ_MASK;
|
|
|
|
mask &= ~(1 << hwirq);
|
|
|
|
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
}
|
|
|
|
|
2011-03-07 21:59:19 +08:00
|
|
|
static void socrates_fpga_pic_mask_ack(struct irq_data *d)
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
{
|
|
|
|
unsigned long flags;
|
2011-05-04 13:02:15 +08:00
|
|
|
unsigned int hwirq = irqd_to_hwirq(d);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
int irq_line;
|
|
|
|
u32 mask;
|
|
|
|
|
|
|
|
irq_line = fpga_irqs[hwirq].irq_line;
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
|
|
|
|
& SOCRATES_FPGA_IRQ_MASK;
|
|
|
|
mask &= ~(1 << hwirq);
|
|
|
|
mask |= (1 << (hwirq + 16));
|
|
|
|
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
}
|
|
|
|
|
2011-03-07 21:59:19 +08:00
|
|
|
static void socrates_fpga_pic_unmask(struct irq_data *d)
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
{
|
|
|
|
unsigned long flags;
|
2011-05-04 13:02:15 +08:00
|
|
|
unsigned int hwirq = irqd_to_hwirq(d);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
int irq_line;
|
|
|
|
u32 mask;
|
|
|
|
|
|
|
|
irq_line = fpga_irqs[hwirq].irq_line;
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
|
|
|
|
& SOCRATES_FPGA_IRQ_MASK;
|
|
|
|
mask |= (1 << hwirq);
|
|
|
|
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
}
|
|
|
|
|
2011-03-07 21:59:19 +08:00
|
|
|
static void socrates_fpga_pic_eoi(struct irq_data *d)
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
{
|
|
|
|
unsigned long flags;
|
2011-05-04 13:02:15 +08:00
|
|
|
unsigned int hwirq = irqd_to_hwirq(d);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
int irq_line;
|
|
|
|
u32 mask;
|
|
|
|
|
|
|
|
irq_line = fpga_irqs[hwirq].irq_line;
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
mask = socrates_fpga_pic_read(FPGA_PIC_IRQMASK(irq_line))
|
|
|
|
& SOCRATES_FPGA_IRQ_MASK;
|
|
|
|
mask |= (1 << (hwirq + 16));
|
|
|
|
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(irq_line), mask);
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
}
|
|
|
|
|
2011-03-07 21:59:19 +08:00
|
|
|
static int socrates_fpga_pic_set_type(struct irq_data *d,
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
unsigned int flow_type)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
2011-05-04 13:02:15 +08:00
|
|
|
unsigned int hwirq = irqd_to_hwirq(d);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
int polarity;
|
|
|
|
u32 mask;
|
|
|
|
|
|
|
|
if (fpga_irqs[hwirq].type != IRQ_TYPE_NONE)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
switch (flow_type & IRQ_TYPE_SENSE_MASK) {
|
|
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
|
|
polarity = 1;
|
|
|
|
break;
|
|
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
|
|
polarity = 0;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
mask = socrates_fpga_pic_read(FPGA_PIC_IRQCFG);
|
|
|
|
if (polarity)
|
|
|
|
mask |= (1 << hwirq);
|
|
|
|
else
|
|
|
|
mask &= ~(1 << hwirq);
|
|
|
|
socrates_fpga_pic_write(FPGA_PIC_IRQCFG, mask);
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irq_chip socrates_fpga_pic_chip = {
|
2010-02-01 04:33:41 +08:00
|
|
|
.name = "FPGA-PIC",
|
2011-03-07 21:59:19 +08:00
|
|
|
.irq_ack = socrates_fpga_pic_ack,
|
|
|
|
.irq_mask = socrates_fpga_pic_mask,
|
|
|
|
.irq_mask_ack = socrates_fpga_pic_mask_ack,
|
|
|
|
.irq_unmask = socrates_fpga_pic_unmask,
|
|
|
|
.irq_eoi = socrates_fpga_pic_eoi,
|
|
|
|
.irq_set_type = socrates_fpga_pic_set_type,
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
};
|
|
|
|
|
2012-02-15 05:06:50 +08:00
|
|
|
static int socrates_fpga_pic_host_map(struct irq_domain *h, unsigned int virq,
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
irq_hw_number_t hwirq)
|
|
|
|
{
|
|
|
|
/* All interrupts are LEVEL sensitive */
|
2011-03-25 22:43:57 +08:00
|
|
|
irq_set_status_flags(virq, IRQ_LEVEL);
|
2011-03-25 23:45:20 +08:00
|
|
|
irq_set_chip_and_handler(virq, &socrates_fpga_pic_chip,
|
|
|
|
handle_fasteoi_irq);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-02-15 05:06:50 +08:00
|
|
|
static int socrates_fpga_pic_host_xlate(struct irq_domain *h,
|
2009-12-08 10:39:50 +08:00
|
|
|
struct device_node *ct, const u32 *intspec, unsigned int intsize,
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
|
|
|
|
{
|
|
|
|
struct socrates_fpga_irq_info *fpga_irq = &fpga_irqs[intspec[0]];
|
|
|
|
|
|
|
|
*out_hwirq = intspec[0];
|
|
|
|
if (fpga_irq->type == IRQ_TYPE_NONE) {
|
|
|
|
/* type is configurable */
|
|
|
|
if (intspec[1] != IRQ_TYPE_LEVEL_LOW &&
|
|
|
|
intspec[1] != IRQ_TYPE_LEVEL_HIGH) {
|
2016-10-25 12:00:08 +08:00
|
|
|
pr_warn("FPGA PIC: invalid irq type, setting default active low\n");
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
*out_flags = IRQ_TYPE_LEVEL_LOW;
|
|
|
|
} else {
|
|
|
|
*out_flags = intspec[1];
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* type is fixed */
|
|
|
|
*out_flags = fpga_irq->type;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Use specified interrupt routing */
|
|
|
|
if (intspec[2] <= 2)
|
|
|
|
fpga_irq->irq_line = intspec[2];
|
|
|
|
else
|
2016-10-25 12:00:08 +08:00
|
|
|
pr_warn("FPGA PIC: invalid irq routing\n");
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-01-27 03:24:34 +08:00
|
|
|
static const struct irq_domain_ops socrates_fpga_pic_host_ops = {
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
.map = socrates_fpga_pic_host_map,
|
|
|
|
.xlate = socrates_fpga_pic_host_xlate,
|
|
|
|
};
|
|
|
|
|
|
|
|
void socrates_fpga_pic_init(struct device_node *pic)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
int i;
|
|
|
|
|
2012-02-15 05:06:50 +08:00
|
|
|
/* Setup an irq_domain structure */
|
2012-02-15 05:06:54 +08:00
|
|
|
socrates_fpga_pic_irq_host = irq_domain_add_linear(pic,
|
|
|
|
SOCRATES_FPGA_NUM_IRQS, &socrates_fpga_pic_host_ops, NULL);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
if (socrates_fpga_pic_irq_host == NULL) {
|
|
|
|
pr_err("FPGA PIC: Unable to allocate host\n");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
|
|
socrates_fpga_irqs[i] = irq_of_parse_and_map(pic, i);
|
2016-09-06 19:53:24 +08:00
|
|
|
if (!socrates_fpga_irqs[i]) {
|
2016-10-25 12:00:08 +08:00
|
|
|
pr_warn("FPGA PIC: can't get irq%d\n", i);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
continue;
|
|
|
|
}
|
2011-03-25 23:45:20 +08:00
|
|
|
irq_set_chained_handler(socrates_fpga_irqs[i],
|
|
|
|
socrates_fpga_pic_cascade);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
socrates_fpga_pic_iobase = of_iomap(pic, 0);
|
|
|
|
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_lock_irqsave(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(0),
|
|
|
|
SOCRATES_FPGA_IRQ_MASK << 16);
|
|
|
|
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(1),
|
|
|
|
SOCRATES_FPGA_IRQ_MASK << 16);
|
|
|
|
socrates_fpga_pic_write(FPGA_PIC_IRQMASK(2),
|
|
|
|
SOCRATES_FPGA_IRQ_MASK << 16);
|
2010-02-18 21:45:12 +08:00
|
|
|
raw_spin_unlock_irqrestore(&socrates_fpga_pic_lock, flags);
|
powerpc/85xx: Add support for the "socrates" board (MPC8544).
Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.
The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.
For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:
can@3,100 {
compatible = "philips,sja1000";
reg = <3 0x100 0x80>;
interrupts = <2 2>;
interrupts = <2 8 1>; // number, type, routing
interrupt-parent = <&fpga_pic>;
};
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-03-22 21:58:43 +08:00
|
|
|
|
|
|
|
pr_info("FPGA PIC: Setting up Socrates FPGA PIC\n");
|
|
|
|
}
|