OpenCloudOS-Kernel/sound/firewire/fireworks/fireworks.c

398 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* fireworks.c - a part of driver for Fireworks based devices
*
* Copyright (c) 2009-2010 Clemens Ladisch
* Copyright (c) 2013-2014 Takashi Sakamoto
*/
/*
* Fireworks is a board module which Echo Audio produced. This module consists
* of three chipsets:
* - Communication chipset for IEEE1394 PHY/Link and IEC 61883-1/6
* - DSP or/and FPGA for signal processing
* - Flash Memory to store firmwares
*/
#include "fireworks.h"
MODULE_DESCRIPTION("Echo Fireworks driver");
MODULE_AUTHOR("Takashi Sakamoto <o-takashi@sakamocchi.jp>");
MODULE_LICENSE("GPL v2");
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
static bool enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
unsigned int snd_efw_resp_buf_size = 1024;
bool snd_efw_resp_buf_debug = false;
module_param_array(index, int, NULL, 0444);
MODULE_PARM_DESC(index, "card index");
module_param_array(id, charp, NULL, 0444);
MODULE_PARM_DESC(id, "ID string");
module_param_array(enable, bool, NULL, 0444);
MODULE_PARM_DESC(enable, "enable Fireworks sound card");
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
module_param_named(resp_buf_size, snd_efw_resp_buf_size, uint, 0444);
MODULE_PARM_DESC(resp_buf_size,
"response buffer size (max 4096, default 1024)");
module_param_named(resp_buf_debug, snd_efw_resp_buf_debug, bool, 0444);
MODULE_PARM_DESC(resp_buf_debug, "store all responses to buffer");
static DEFINE_MUTEX(devices_mutex);
static DECLARE_BITMAP(devices_used, SNDRV_CARDS);
#define VENDOR_LOUD 0x000ff2
#define MODEL_MACKIE_400F 0x00400f
#define MODEL_MACKIE_1200F 0x01200f
#define VENDOR_ECHO 0x001486
#define MODEL_ECHO_AUDIOFIRE_12 0x00af12
#define MODEL_ECHO_AUDIOFIRE_12HD 0x0af12d
#define MODEL_ECHO_AUDIOFIRE_12_APPLE 0x0af12a
/* This is applied for AudioFire8 (until 2009 July) */
#define MODEL_ECHO_AUDIOFIRE_8 0x000af8
#define MODEL_ECHO_AUDIOFIRE_2 0x000af2
#define MODEL_ECHO_AUDIOFIRE_4 0x000af4
/* AudioFire9 is applied for AudioFire8(since 2009 July) and AudioFirePre8 */
#define MODEL_ECHO_AUDIOFIRE_9 0x000af9
/* unknown as product */
#define MODEL_ECHO_FIREWORKS_8 0x0000f8
#define MODEL_ECHO_FIREWORKS_HDMI 0x00afd1
#define VENDOR_GIBSON 0x00075b
/* for Robot Interface Pack of Dark Fire, Dusk Tiger, Les Paul Standard 2010 */
#define MODEL_GIBSON_RIP 0x00afb2
/* unknown as product */
#define MODEL_GIBSON_GOLDTOP 0x00afb9
/* part of hardware capability flags */
#define FLAG_RESP_ADDR_CHANGABLE 0
static int
get_hardware_info(struct snd_efw *efw)
{
struct fw_device *fw_dev = fw_parent_device(efw->unit);
struct snd_efw_hwinfo *hwinfo;
char version[12] = {0};
int err;
hwinfo = kzalloc(sizeof(struct snd_efw_hwinfo), GFP_KERNEL);
if (hwinfo == NULL)
return -ENOMEM;
err = snd_efw_command_get_hwinfo(efw, hwinfo);
if (err < 0)
goto end;
/* firmware version for communication chipset */
snprintf(version, sizeof(version), "%u.%u",
(hwinfo->arm_version >> 24) & 0xff,
(hwinfo->arm_version >> 16) & 0xff);
efw->firmware_version = hwinfo->arm_version;
strcpy(efw->card->driver, "Fireworks");
strcpy(efw->card->shortname, hwinfo->model_name);
strcpy(efw->card->mixername, hwinfo->model_name);
snprintf(efw->card->longname, sizeof(efw->card->longname),
"%s %s v%s, GUID %08x%08x at %s, S%d",
hwinfo->vendor_name, hwinfo->model_name, version,
hwinfo->guid_hi, hwinfo->guid_lo,
dev_name(&efw->unit->device), 100 << fw_dev->max_speed);
if (hwinfo->flags & BIT(FLAG_RESP_ADDR_CHANGABLE))
efw->resp_addr_changable = true;
efw->supported_sampling_rate = 0;
if ((hwinfo->min_sample_rate <= 22050)
&& (22050 <= hwinfo->max_sample_rate))
efw->supported_sampling_rate |= SNDRV_PCM_RATE_22050;
if ((hwinfo->min_sample_rate <= 32000)
&& (32000 <= hwinfo->max_sample_rate))
efw->supported_sampling_rate |= SNDRV_PCM_RATE_32000;
if ((hwinfo->min_sample_rate <= 44100)
&& (44100 <= hwinfo->max_sample_rate))
efw->supported_sampling_rate |= SNDRV_PCM_RATE_44100;
if ((hwinfo->min_sample_rate <= 48000)
&& (48000 <= hwinfo->max_sample_rate))
efw->supported_sampling_rate |= SNDRV_PCM_RATE_48000;
if ((hwinfo->min_sample_rate <= 88200)
&& (88200 <= hwinfo->max_sample_rate))
efw->supported_sampling_rate |= SNDRV_PCM_RATE_88200;
if ((hwinfo->min_sample_rate <= 96000)
&& (96000 <= hwinfo->max_sample_rate))
efw->supported_sampling_rate |= SNDRV_PCM_RATE_96000;
if ((hwinfo->min_sample_rate <= 176400)
&& (176400 <= hwinfo->max_sample_rate))
efw->supported_sampling_rate |= SNDRV_PCM_RATE_176400;
if ((hwinfo->min_sample_rate <= 192000)
&& (192000 <= hwinfo->max_sample_rate))
efw->supported_sampling_rate |= SNDRV_PCM_RATE_192000;
/* the number of MIDI ports, not of MIDI conformant data channels */
if (hwinfo->midi_out_ports > SND_EFW_MAX_MIDI_OUT_PORTS ||
hwinfo->midi_in_ports > SND_EFW_MAX_MIDI_IN_PORTS) {
err = -EIO;
goto end;
}
efw->midi_out_ports = hwinfo->midi_out_ports;
efw->midi_in_ports = hwinfo->midi_in_ports;
if (hwinfo->amdtp_tx_pcm_channels > AM824_MAX_CHANNELS_FOR_PCM ||
hwinfo->amdtp_tx_pcm_channels_2x > AM824_MAX_CHANNELS_FOR_PCM ||
hwinfo->amdtp_tx_pcm_channels_4x > AM824_MAX_CHANNELS_FOR_PCM ||
hwinfo->amdtp_rx_pcm_channels > AM824_MAX_CHANNELS_FOR_PCM ||
hwinfo->amdtp_rx_pcm_channels_2x > AM824_MAX_CHANNELS_FOR_PCM ||
hwinfo->amdtp_rx_pcm_channels_4x > AM824_MAX_CHANNELS_FOR_PCM) {
err = -ENOSYS;
goto end;
}
efw->pcm_capture_channels[0] = hwinfo->amdtp_tx_pcm_channels;
efw->pcm_capture_channels[1] = hwinfo->amdtp_tx_pcm_channels_2x;
efw->pcm_capture_channels[2] = hwinfo->amdtp_tx_pcm_channels_4x;
efw->pcm_playback_channels[0] = hwinfo->amdtp_rx_pcm_channels;
efw->pcm_playback_channels[1] = hwinfo->amdtp_rx_pcm_channels_2x;
efw->pcm_playback_channels[2] = hwinfo->amdtp_rx_pcm_channels_4x;
/* Hardware metering. */
if (hwinfo->phys_in_grp_count > HWINFO_MAX_CAPS_GROUPS ||
hwinfo->phys_out_grp_count > HWINFO_MAX_CAPS_GROUPS) {
err = -EIO;
goto end;
}
efw->phys_in = hwinfo->phys_in;
efw->phys_out = hwinfo->phys_out;
efw->phys_in_grp_count = hwinfo->phys_in_grp_count;
efw->phys_out_grp_count = hwinfo->phys_out_grp_count;
memcpy(&efw->phys_in_grps, hwinfo->phys_in_grps,
sizeof(struct snd_efw_phys_grp) * hwinfo->phys_in_grp_count);
memcpy(&efw->phys_out_grps, hwinfo->phys_out_grps,
sizeof(struct snd_efw_phys_grp) * hwinfo->phys_out_grp_count);
/* AudioFire8 (since 2009) and AudioFirePre8 */
if (hwinfo->type == MODEL_ECHO_AUDIOFIRE_9)
efw->is_af9 = true;
/* These models uses the same firmware. */
if (hwinfo->type == MODEL_ECHO_AUDIOFIRE_2 ||
hwinfo->type == MODEL_ECHO_AUDIOFIRE_4 ||
hwinfo->type == MODEL_ECHO_AUDIOFIRE_9 ||
hwinfo->type == MODEL_GIBSON_RIP ||
hwinfo->type == MODEL_GIBSON_GOLDTOP)
efw->is_fireworks3 = true;
end:
kfree(hwinfo);
return err;
}
static void
efw_card_free(struct snd_card *card)
{
struct snd_efw *efw = card->private_data;
mutex_lock(&devices_mutex);
clear_bit(efw->card_index, devices_used);
mutex_unlock(&devices_mutex);
snd_efw_stream_destroy_duplex(efw);
snd_efw_transaction_remove_instance(efw);
}
static void
do_registration(struct work_struct *work)
{
struct snd_efw *efw = container_of(work, struct snd_efw, dwork.work);
unsigned int card_index;
int err;
if (efw->registered)
return;
/* check registered cards */
mutex_lock(&devices_mutex);
for (card_index = 0; card_index < SNDRV_CARDS; ++card_index) {
if (!test_bit(card_index, devices_used) && enable[card_index])
break;
}
if (card_index >= SNDRV_CARDS) {
mutex_unlock(&devices_mutex);
return;
}
err = snd_card_new(&efw->unit->device, index[card_index],
id[card_index], THIS_MODULE, 0, &efw->card);
if (err < 0) {
mutex_unlock(&devices_mutex);
return;
}
set_bit(card_index, devices_used);
mutex_unlock(&devices_mutex);
efw->card->private_free = efw_card_free;
efw->card->private_data = efw;
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
/* prepare response buffer */
snd_efw_resp_buf_size = clamp(snd_efw_resp_buf_size,
SND_EFW_RESPONSE_MAXIMUM_BYTES, 4096U);
efw->resp_buf = devm_kzalloc(&efw->card->card_dev,
snd_efw_resp_buf_size, GFP_KERNEL);
if (!efw->resp_buf) {
ALSA: fireworks: Add command/response functionality into hwdep interface This commit adds two functionality for hwdep interface, adds two parameters for this driver, add a node for proc interface. To receive responses from devices, this driver already allocate own callback into initial memory space in host controller. This means no one can allocate its own callback to the address. So this driver must give a way for user applications to receive responses. This commit adds a functionality to receive responses via hwdep interface. The application can receive responses to read from this interface. To achieve this, this commit adds a buffer to queue responses. The default size of this buffer is 1024 bytes. This size can be changed to give preferrable size to 'resp_buf_size' parameter for this driver. The application should notice rest of space in this buffer because this driver don't push responses when this buffer has no space. Additionaly, this commit adds a functionality to transmit commands via hwdep interface. The application can transmit commands to write into this interface. I note that the application can transmit one command at once, but can receive as many responses as possible untill the user-buffer is full. When using these interfaces, the application must keep maximum number of sequence number in command within the number in firewire.h because this driver uses this number to distinguish the response is against the command by the application or this driver. Usually responses against commands which the application transmits are pushed into this buffer. But to enable 'resp_buf_debug' parameter for this driver, all responses are pushed into the buffer. When using this mode, I reccomend to expand the size of buffer. Finally this commit adds a new node into proc interface to output status of the buffer. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-04-25 21:45:13 +08:00
err = -ENOMEM;
goto error;
}
efw->pull_ptr = efw->push_ptr = efw->resp_buf;
snd_efw_transaction_add_instance(efw);
err = get_hardware_info(efw);
if (err < 0)
goto error;
err = snd_efw_stream_init_duplex(efw);
if (err < 0)
goto error;
snd_efw_proc_init(efw);
if (efw->midi_out_ports || efw->midi_in_ports) {
err = snd_efw_create_midi_devices(efw);
if (err < 0)
goto error;
}
err = snd_efw_create_pcm_devices(efw);
if (err < 0)
goto error;
err = snd_efw_create_hwdep_device(efw);
if (err < 0)
goto error;
err = snd_card_register(efw->card);
if (err < 0)
goto error;
efw->registered = true;
return;
error:
snd_card_free(efw->card);
dev_info(&efw->unit->device,
"Sound card registration failed: %d\n", err);
}
static int
efw_probe(struct fw_unit *unit, const struct ieee1394_device_id *entry)
{
struct snd_efw *efw;
efw = devm_kzalloc(&unit->device, sizeof(struct snd_efw), GFP_KERNEL);
if (efw == NULL)
return -ENOMEM;
efw->unit = fw_unit_get(unit);
dev_set_drvdata(&unit->device, efw);
mutex_init(&efw->mutex);
spin_lock_init(&efw->lock);
init_waitqueue_head(&efw->hwdep_wait);
/* Allocate and register this sound card later. */
INIT_DEFERRABLE_WORK(&efw->dwork, do_registration);
snd_fw_schedule_registration(unit, &efw->dwork);
return 0;
}
static void efw_update(struct fw_unit *unit)
{
struct snd_efw *efw = dev_get_drvdata(&unit->device);
/* Postpone a workqueue for deferred registration. */
if (!efw->registered)
snd_fw_schedule_registration(unit, &efw->dwork);
snd_efw_transaction_bus_reset(efw->unit);
/*
* After registration, userspace can start packet streaming, then this
* code block works fine.
*/
if (efw->registered) {
mutex_lock(&efw->mutex);
snd_efw_stream_update_duplex(efw);
mutex_unlock(&efw->mutex);
}
}
static void efw_remove(struct fw_unit *unit)
{
struct snd_efw *efw = dev_get_drvdata(&unit->device);
/*
* Confirm to stop the work for registration before the sound card is
* going to be released. The work is not scheduled again because bus
* reset handler is not called anymore.
*/
cancel_delayed_work_sync(&efw->dwork);
if (efw->registered) {
// Block till all of ALSA character devices are released.
snd_card_free(efw->card);
}
mutex_destroy(&efw->mutex);
fw_unit_put(efw->unit);
}
static const struct ieee1394_device_id efw_id_table[] = {
SND_EFW_DEV_ENTRY(VENDOR_LOUD, MODEL_MACKIE_400F),
SND_EFW_DEV_ENTRY(VENDOR_LOUD, MODEL_MACKIE_1200F),
SND_EFW_DEV_ENTRY(VENDOR_ECHO, MODEL_ECHO_AUDIOFIRE_8),
SND_EFW_DEV_ENTRY(VENDOR_ECHO, MODEL_ECHO_AUDIOFIRE_12),
SND_EFW_DEV_ENTRY(VENDOR_ECHO, MODEL_ECHO_AUDIOFIRE_12HD),
SND_EFW_DEV_ENTRY(VENDOR_ECHO, MODEL_ECHO_AUDIOFIRE_12_APPLE),
SND_EFW_DEV_ENTRY(VENDOR_ECHO, MODEL_ECHO_AUDIOFIRE_2),
SND_EFW_DEV_ENTRY(VENDOR_ECHO, MODEL_ECHO_AUDIOFIRE_4),
SND_EFW_DEV_ENTRY(VENDOR_ECHO, MODEL_ECHO_AUDIOFIRE_9),
SND_EFW_DEV_ENTRY(VENDOR_ECHO, MODEL_ECHO_FIREWORKS_8),
SND_EFW_DEV_ENTRY(VENDOR_ECHO, MODEL_ECHO_FIREWORKS_HDMI),
SND_EFW_DEV_ENTRY(VENDOR_GIBSON, MODEL_GIBSON_RIP),
SND_EFW_DEV_ENTRY(VENDOR_GIBSON, MODEL_GIBSON_GOLDTOP),
{}
};
MODULE_DEVICE_TABLE(ieee1394, efw_id_table);
static struct fw_driver efw_driver = {
.driver = {
.owner = THIS_MODULE,
.name = KBUILD_MODNAME,
.bus = &fw_bus_type,
},
.probe = efw_probe,
.update = efw_update,
.remove = efw_remove,
.id_table = efw_id_table,
};
static int __init snd_efw_init(void)
{
int err;
err = snd_efw_transaction_register();
if (err < 0)
goto end;
err = driver_register(&efw_driver.driver);
if (err < 0)
snd_efw_transaction_unregister();
end:
return err;
}
static void __exit snd_efw_exit(void)
{
snd_efw_transaction_unregister();
driver_unregister(&efw_driver.driver);
}
module_init(snd_efw_init);
module_exit(snd_efw_exit);