345 lines
9.1 KiB
C
345 lines
9.1 KiB
C
|
/*
|
||
|
|
* max3107.c - spi uart protocol driver for Maxim 3107
|
||
|
|
* Based on max3100.c
|
||
|
|
* by Christian Pellegrin <chripell@evolware.org>
|
||
|
|
* and max3110.c
|
||
|
|
* by Feng Tang <feng.tang@intel.com>
|
||
|
|
*
|
||
|
|
* Copyright (C) Aavamobile 2009
|
||
|
|
*
|
||
|
|
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or modify
|
||
|
|
* it under the terms of the GNU General Public License as published by
|
||
|
|
* the Free Software Foundation; either version 2 of the License, or
|
||
|
|
* (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* You should have received a copy of the GNU General Public License
|
||
|
|
* along with this program; if not, write to the Free Software
|
||
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||
|
|
*
|
||
|
|
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||
|
|
*
|
||
|
|
*/
|
||
|
|
|
||
|
|
#include <linux/delay.h>
|
||
|
|
#include <linux/device.h>
|
||
|
|
#include <linux/serial_core.h>
|
||
|
|
#include <linux/serial.h>
|
||
|
|
#include <linux/spi/spi.h>
|
||
|
|
#include <linux/freezer.h>
|
||
|
|
#include <linux/platform_device.h>
|
||
|
|
#include <linux/gpio.h>
|
||
|
|
#include <linux/sfi.h>
|
||
|
|
#include <asm/mrst.h>
|
||
|
|
#include "max3107.h"
|
||
|
|
|
||
|
|
/* GPIO direction to input function */
|
||
|
|
static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
|
||
|
|
{
|
||
|
|
struct max3107_port *s = container_of(chip, struct max3107_port, chip);
|
||
|
|
u16 buf[1]; /* Buffer for SPI transfer */
|
||
|
|
|
||
|
|
if (offset >= MAX3107_GPIO_COUNT) {
|
||
|
|
dev_err(&s->spi->dev, "Invalid GPIO\n");
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Read current GPIO configuration register */
|
||
|
|
buf[0] = MAX3107_GPIOCFG_REG;
|
||
|
|
/* Perform SPI transfer */
|
||
|
|
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
|
||
|
|
dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n");
|
||
|
|
return -EIO;
|
||
|
|
}
|
||
|
|
buf[0] &= MAX3107_SPI_RX_DATA_MASK;
|
||
|
|
|
||
|
|
/* Set GPIO to input */
|
||
|
|
buf[0] &= ~(0x0001 << offset);
|
||
|
|
|
||
|
|
/* Write new GPIO configuration register value */
|
||
|
|
buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
|
||
|
|
/* Perform SPI transfer */
|
||
|
|
if (max3107_rw(s, (u8 *)buf, NULL, 2)) {
|
||
|
|
dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n");
|
||
|
|
return -EIO;
|
||
|
|
}
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* GPIO direction to output function */
|
||
|
|
static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset,
|
||
|
|
int value)
|
||
|
|
{
|
||
|
|
struct max3107_port *s = container_of(chip, struct max3107_port, chip);
|
||
|
|
u16 buf[2]; /* Buffer for SPI transfers */
|
||
|
|
|
||
|
|
if (offset >= MAX3107_GPIO_COUNT) {
|
||
|
|
dev_err(&s->spi->dev, "Invalid GPIO\n");
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Read current GPIO configuration and data registers */
|
||
|
|
buf[0] = MAX3107_GPIOCFG_REG;
|
||
|
|
buf[1] = MAX3107_GPIODATA_REG;
|
||
|
|
/* Perform SPI transfer */
|
||
|
|
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
|
||
|
|
dev_err(&s->spi->dev, "SPI transfer gpio failed\n");
|
||
|
|
return -EIO;
|
||
|
|
}
|
||
|
|
buf[0] &= MAX3107_SPI_RX_DATA_MASK;
|
||
|
|
buf[1] &= MAX3107_SPI_RX_DATA_MASK;
|
||
|
|
|
||
|
|
/* Set GPIO to output */
|
||
|
|
buf[0] |= (0x0001 << offset);
|
||
|
|
/* Set value */
|
||
|
|
if (value)
|
||
|
|
buf[1] |= (0x0001 << offset);
|
||
|
|
else
|
||
|
|
buf[1] &= ~(0x0001 << offset);
|
||
|
|
|
||
|
|
/* Write new GPIO configuration and data register values */
|
||
|
|
buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG);
|
||
|
|
buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
|
||
|
|
/* Perform SPI transfer */
|
||
|
|
if (max3107_rw(s, (u8 *)buf, NULL, 4)) {
|
||
|
|
dev_err(&s->spi->dev,
|
||
|
|
"SPI transfer for GPIO conf data w failed\n");
|
||
|
|
return -EIO;
|
||
|
|
}
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* GPIO value query function */
|
||
|
|
static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset)
|
||
|
|
{
|
||
|
|
struct max3107_port *s = container_of(chip, struct max3107_port, chip);
|
||
|
|
u16 buf[1]; /* Buffer for SPI transfer */
|
||
|
|
|
||
|
|
if (offset >= MAX3107_GPIO_COUNT) {
|
||
|
|
dev_err(&s->spi->dev, "Invalid GPIO\n");
|
||
|
|
return -EINVAL;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Read current GPIO data register */
|
||
|
|
buf[0] = MAX3107_GPIODATA_REG;
|
||
|
|
/* Perform SPI transfer */
|
||
|
|
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) {
|
||
|
|
dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n");
|
||
|
|
return -EIO;
|
||
|
|
}
|
||
|
|
buf[0] &= MAX3107_SPI_RX_DATA_MASK;
|
||
|
|
|
||
|
|
/* Return value */
|
||
|
|
return buf[0] & (0x0001 << offset);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* GPIO value set function */
|
||
|
|
static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
||
|
|
{
|
||
|
|
struct max3107_port *s = container_of(chip, struct max3107_port, chip);
|
||
|
|
u16 buf[2]; /* Buffer for SPI transfers */
|
||
|
|
|
||
|
|
if (offset >= MAX3107_GPIO_COUNT) {
|
||
|
|
dev_err(&s->spi->dev, "Invalid GPIO\n");
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Read current GPIO configuration registers*/
|
||
|
|
buf[0] = MAX3107_GPIODATA_REG;
|
||
|
|
buf[1] = MAX3107_GPIOCFG_REG;
|
||
|
|
/* Perform SPI transfer */
|
||
|
|
if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) {
|
||
|
|
dev_err(&s->spi->dev,
|
||
|
|
"SPI transfer for GPIO data and config read failed\n");
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
buf[0] &= MAX3107_SPI_RX_DATA_MASK;
|
||
|
|
buf[1] &= MAX3107_SPI_RX_DATA_MASK;
|
||
|
|
|
||
|
|
if (!(buf[1] & (0x0001 << offset))) {
|
||
|
|
/* Configured as input, can't set value */
|
||
|
|
dev_warn(&s->spi->dev,
|
||
|
|
"Trying to set value for input GPIO\n");
|
||
|
|
return;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Set value */
|
||
|
|
if (value)
|
||
|
|
buf[0] |= (0x0001 << offset);
|
||
|
|
else
|
||
|
|
buf[0] &= ~(0x0001 << offset);
|
||
|
|
|
||
|
|
/* Write new GPIO data register value */
|
||
|
|
buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG);
|
||
|
|
/* Perform SPI transfer */
|
||
|
|
if (max3107_rw(s, (u8 *)buf, NULL, 2))
|
||
|
|
dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n");
|
||
|
|
}
|
||
|
|
|
||
|
|
/* GPIO chip data */
|
||
|
|
static struct gpio_chip max3107_gpio_chip = {
|
||
|
|
.owner = THIS_MODULE,
|
||
|
|
.direction_input = max3107_gpio_direction_in,
|
||
|
|
.direction_output = max3107_gpio_direction_out,
|
||
|
|
.get = max3107_gpio_get,
|
||
|
|
.set = max3107_gpio_set,
|
||
|
|
.can_sleep = 1,
|
||
|
|
.base = MAX3107_GPIO_BASE,
|
||
|
|
.ngpio = MAX3107_GPIO_COUNT,
|
||
|
|
};
|
||
|
|
|
||
|
|
/**
|
||
|
|
* max3107_aava_reset - reset on AAVA systems
|
||
|
|
* @spi: The SPI device we are probing
|
||
|
|
*
|
||
|
|
* Reset the device ready for probing.
|
||
|
|
*/
|
||
|
|
|
||
|
|
static int max3107_aava_reset(struct spi_device *spi)
|
||
|
|
{
|
||
|
|
/* Reset the chip */
|
||
|
|
if (gpio_request(MAX3107_RESET_GPIO, "max3107")) {
|
||
|
|
pr_err("Requesting RESET GPIO failed\n");
|
||
|
|
return -EIO;
|
||
|
|
}
|
||
|
|
if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) {
|
||
|
|
pr_err("Setting RESET GPIO to 0 failed\n");
|
||
|
|
gpio_free(MAX3107_RESET_GPIO);
|
||
|
|
return -EIO;
|
||
|
|
}
|
||
|
|
msleep(MAX3107_RESET_DELAY);
|
||
|
|
if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) {
|
||
|
|
pr_err("Setting RESET GPIO to 1 failed\n");
|
||
|
|
gpio_free(MAX3107_RESET_GPIO);
|
||
|
|
return -EIO;
|
||
|
|
}
|
||
|
|
gpio_free(MAX3107_RESET_GPIO);
|
||
|
|
msleep(MAX3107_WAKEUP_DELAY);
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
static int max3107_aava_configure(struct max3107_port *s)
|
||
|
|
{
|
||
|
|
int retval;
|
||
|
|
|
||
|
|
/* Initialize GPIO chip data */
|
||
|
|
s->chip = max3107_gpio_chip;
|
||
|
|
s->chip.label = s->spi->modalias;
|
||
|
|
s->chip.dev = &s->spi->dev;
|
||
|
|
|
||
|
|
/* Add GPIO chip */
|
||
|
|
retval = gpiochip_add(&s->chip);
|
||
|
|
if (retval) {
|
||
|
|
dev_err(&s->spi->dev, "Adding GPIO chip failed\n");
|
||
|
|
return retval;
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Temporary fix for EV2 boot problems, set modem reset to 0 */
|
||
|
|
max3107_gpio_direction_out(&s->chip, 3, 0);
|
||
|
|
return 0;
|
||
|
|
}
|
||
|
|
|
||
|
|
#if 0
|
||
|
|
/* This will get enabled once we have the board stuff merged for this
|
||
|
|
specific case */
|
||
|
|
|
||
|
|
static const struct baud_table brg13_ext[] = {
|
||
|
|
{ 300, MAX3107_BRG13_B300 },
|
||
|
|
{ 600, MAX3107_BRG13_B600 },
|
||
|
|
{ 1200, MAX3107_BRG13_B1200 },
|
||
|
|
{ 2400, MAX3107_BRG13_B2400 },
|
||
|
|
{ 4800, MAX3107_BRG13_B4800 },
|
||
|
|
{ 9600, MAX3107_BRG13_B9600 },
|
||
|
|
{ 19200, MAX3107_BRG13_B19200 },
|
||
|
|
{ 57600, MAX3107_BRG13_B57600 },
|
||
|
|
{ 115200, MAX3107_BRG13_B115200 },
|
||
|
|
{ 230400, MAX3107_BRG13_B230400 },
|
||
|
|
{ 460800, MAX3107_BRG13_B460800 },
|
||
|
|
{ 921600, MAX3107_BRG13_B921600 },
|
||
|
|
{ 0, 0 }
|
||
|
|
};
|
||
|
|
|
||
|
|
static void max3107_aava_init(struct max3107_port *s)
|
||
|
|
{
|
||
|
|
/*override for AAVA SC specific*/
|
||
|
|
if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) {
|
||
|
|
if (get_koski_build_id() <= KOSKI_EV2)
|
||
|
|
if (s->ext_clk) {
|
||
|
|
s->brg_cfg = MAX3107_BRG13_B9600;
|
||
|
|
s->baud_tbl = (struct baud_table *)brg13_ext;
|
||
|
|
}
|
||
|
|
}
|
||
|
|
}
|
||
|
|
#endif
|
||
|
|
|
||
|
|
static int __devexit max3107_aava_remove(struct spi_device *spi)
|
||
|
|
{
|
||
|
|
struct max3107_port *s = dev_get_drvdata(&spi->dev);
|
||
|
|
|
||
|
|
/* Remove GPIO chip */
|
||
|
|
if (gpiochip_remove(&s->chip))
|
||
|
|
dev_warn(&spi->dev, "Removing GPIO chip failed\n");
|
||
|
|
|
||
|
|
/* Then do the default remove */
|
||
|
|
return max3107_remove(spi);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Platform data */
|
||
|
|
static struct max3107_plat aava_plat_data = {
|
||
|
|
.loopback = 0,
|
||
|
|
.ext_clk = 1,
|
||
|
|
/* .init = max3107_aava_init, */
|
||
|
|
.configure = max3107_aava_configure,
|
||
|
|
.hw_suspend = max3107_hw_susp,
|
||
|
|
.polled_mode = 0,
|
||
|
|
.poll_time = 0,
|
||
|
|
};
|
||
|
|
|
||
|
|
|
||
|
|
static int __devinit max3107_probe_aava(struct spi_device *spi)
|
||
|
|
{
|
||
|
|
int err = max3107_aava_reset(spi);
|
||
|
|
if (err < 0)
|
||
|
|
return err;
|
||
|
|
return max3107_probe(spi, &aava_plat_data);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Spi driver data */
|
||
|
|
static struct spi_driver max3107_driver = {
|
||
|
|
.driver = {
|
||
|
|
.name = "aava-max3107",
|
||
|
|
.bus = &spi_bus_type,
|
||
|
|
.owner = THIS_MODULE,
|
||
|
|
},
|
||
|
|
.probe = max3107_probe_aava,
|
||
|
|
.remove = __devexit_p(max3107_aava_remove),
|
||
|
|
.suspend = max3107_suspend,
|
||
|
|
.resume = max3107_resume,
|
||
|
|
};
|
||
|
|
|
||
|
|
/* Driver init function */
|
||
|
|
static int __init max3107_init(void)
|
||
|
|
{
|
||
|
|
return spi_register_driver(&max3107_driver);
|
||
|
|
}
|
||
|
|
|
||
|
|
/* Driver exit function */
|
||
|
|
static void __exit max3107_exit(void)
|
||
|
|
{
|
||
|
|
spi_unregister_driver(&max3107_driver);
|
||
|
|
}
|
||
|
|
|
||
|
|
module_init(max3107_init);
|
||
|
|
module_exit(max3107_exit);
|
||
|
|
|
||
|
|
MODULE_DESCRIPTION("MAX3107 driver");
|
||
|
|
MODULE_AUTHOR("Aavamobile");
|
||
|
|
MODULE_ALIAS("aava-max3107-spi");
|
||
|
|
MODULE_LICENSE("GPL v2");
|