2022-07-05 20:22:41 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Device driver for regulators in MAX5970 and MAX5978 IC
|
|
|
|
*
|
|
|
|
* Copyright (c) 2022 9elements GmbH
|
|
|
|
*
|
|
|
|
* Author: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include <linux/device.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/regulator/driver.h>
|
|
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
|
|
|
|
#include <linux/mfd/max597x.h>
|
|
|
|
|
|
|
|
struct max597x_regulator {
|
|
|
|
int num_switches, mon_rng, irng, shunt_micro_ohms, lim_uA;
|
|
|
|
struct regmap *regmap;
|
|
|
|
};
|
|
|
|
|
|
|
|
enum max597x_regulator_id {
|
|
|
|
MAX597X_SW0,
|
|
|
|
MAX597X_SW1,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int max597x_uvp_ovp_check_mode(struct regulator_dev *rdev, int severity)
|
|
|
|
{
|
|
|
|
int ret, reg;
|
|
|
|
|
|
|
|
/* Status1 register contains the soft strap values sampled at POR */
|
|
|
|
ret = regmap_read(rdev->regmap, MAX5970_REG_STATUS1, ®);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* Check soft straps match requested mode */
|
|
|
|
if (severity == REGULATOR_SEVERITY_PROT) {
|
|
|
|
if (STATUS1_PROT(reg) != STATUS1_PROT_SHUTDOWN)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
if (STATUS1_PROT(reg) == STATUS1_PROT_SHUTDOWN)
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int max597x_set_vp(struct regulator_dev *rdev, int lim_uV, int severity,
|
|
|
|
bool enable, bool overvoltage)
|
|
|
|
{
|
|
|
|
int off_h, off_l, reg, ret;
|
|
|
|
struct max597x_regulator *data = rdev_get_drvdata(rdev);
|
|
|
|
int channel = rdev_get_id(rdev);
|
|
|
|
|
|
|
|
if (overvoltage) {
|
|
|
|
if (severity == REGULATOR_SEVERITY_WARN) {
|
|
|
|
off_h = MAX5970_REG_CH_OV_WARN_H(channel);
|
|
|
|
off_l = MAX5970_REG_CH_OV_WARN_L(channel);
|
|
|
|
} else {
|
|
|
|
off_h = MAX5970_REG_CH_OV_CRIT_H(channel);
|
|
|
|
off_l = MAX5970_REG_CH_OV_CRIT_L(channel);
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (severity == REGULATOR_SEVERITY_WARN) {
|
|
|
|
off_h = MAX5970_REG_CH_UV_WARN_H(channel);
|
|
|
|
off_l = MAX5970_REG_CH_UV_WARN_L(channel);
|
|
|
|
} else {
|
|
|
|
off_h = MAX5970_REG_CH_UV_CRIT_H(channel);
|
|
|
|
off_l = MAX5970_REG_CH_UV_CRIT_L(channel);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (enable)
|
|
|
|
/* reg = ADC_MASK * (lim_uV / 1000000) / (data->mon_rng / 1000000) */
|
|
|
|
reg = ADC_MASK * lim_uV / data->mon_rng;
|
|
|
|
else
|
|
|
|
reg = 0;
|
|
|
|
|
|
|
|
ret = regmap_write(rdev->regmap, off_h, MAX5970_VAL2REG_H(reg));
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = regmap_write(rdev->regmap, off_l, MAX5970_VAL2REG_L(reg));
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int max597x_set_uvp(struct regulator_dev *rdev, int lim_uV, int severity,
|
|
|
|
bool enable)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* MAX5970 has enable control as a special value in limit reg. Can't
|
|
|
|
* set limit but keep feature disabled or enable W/O given limit.
|
|
|
|
*/
|
|
|
|
if ((lim_uV && !enable) || (!lim_uV && enable))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
ret = max597x_uvp_ovp_check_mode(rdev, severity);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return max597x_set_vp(rdev, lim_uV, severity, enable, false);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int max597x_set_ovp(struct regulator_dev *rdev, int lim_uV, int severity,
|
|
|
|
bool enable)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* MAX5970 has enable control as a special value in limit reg. Can't
|
|
|
|
* set limit but keep feature disabled or enable W/O given limit.
|
|
|
|
*/
|
|
|
|
if ((lim_uV && !enable) || (!lim_uV && enable))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
ret = max597x_uvp_ovp_check_mode(rdev, severity);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
return max597x_set_vp(rdev, lim_uV, severity, enable, true);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int max597x_set_ocp(struct regulator_dev *rdev, int lim_uA,
|
|
|
|
int severity, bool enable)
|
|
|
|
{
|
2022-08-24 15:47:07 +08:00
|
|
|
int val, reg;
|
2022-07-05 20:22:41 +08:00
|
|
|
unsigned int vthst, vthfst;
|
|
|
|
|
|
|
|
struct max597x_regulator *data = rdev_get_drvdata(rdev);
|
|
|
|
int rdev_id = rdev_get_id(rdev);
|
|
|
|
/*
|
|
|
|
* MAX5970 doesn't has enable control for ocp.
|
|
|
|
* If limit is specified but enable is not set then hold the value in
|
|
|
|
* variable & later use it when ocp needs to be enabled.
|
|
|
|
*/
|
|
|
|
if (lim_uA != 0 && lim_uA != data->lim_uA)
|
|
|
|
data->lim_uA = lim_uA;
|
|
|
|
|
|
|
|
if (severity != REGULATOR_SEVERITY_PROT)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (enable) {
|
|
|
|
|
|
|
|
/* Calc Vtrip threshold in uV. */
|
|
|
|
vthst =
|
|
|
|
div_u64(mul_u32_u32(data->shunt_micro_ohms, data->lim_uA),
|
|
|
|
1000000);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* As recommended in datasheed, add 20% margin to avoid
|
|
|
|
* spurious event & passive component tolerance.
|
|
|
|
*/
|
|
|
|
vthst = div_u64(mul_u32_u32(vthst, 120), 100);
|
|
|
|
|
|
|
|
/* Calc fast Vtrip threshold in uV */
|
|
|
|
vthfst = vthst * (MAX5970_FAST2SLOW_RATIO / 100);
|
|
|
|
|
|
|
|
if (vthfst > data->irng) {
|
|
|
|
dev_err(&rdev->dev, "Current limit out of range\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
/* Fast trip threshold to be programmed */
|
|
|
|
val = div_u64(mul_u32_u32(0xFF, vthfst), data->irng);
|
|
|
|
} else
|
|
|
|
/*
|
|
|
|
* Since there is no option to disable ocp, set limit to max
|
|
|
|
* value
|
|
|
|
*/
|
|
|
|
val = 0xFF;
|
|
|
|
|
|
|
|
reg = MAX5970_REG_DAC_FAST(rdev_id);
|
|
|
|
|
2022-08-24 15:47:07 +08:00
|
|
|
return regmap_write(rdev->regmap, reg, val);
|
2022-07-05 20:22:41 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int max597x_get_status(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
int val, ret;
|
|
|
|
|
|
|
|
ret = regmap_read(rdev->regmap, MAX5970_REG_STATUS3, &val);
|
|
|
|
if (ret)
|
|
|
|
return REGULATOR_FAILED_RETRY;
|
|
|
|
|
|
|
|
if (val & MAX5970_STATUS3_ALERT)
|
|
|
|
return REGULATOR_STATUS_ERROR;
|
|
|
|
|
|
|
|
ret = regulator_is_enabled_regmap(rdev);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (ret)
|
|
|
|
return REGULATOR_STATUS_ON;
|
|
|
|
|
|
|
|
return REGULATOR_STATUS_OFF;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct regulator_ops max597x_switch_ops = {
|
|
|
|
.enable = regulator_enable_regmap,
|
|
|
|
.disable = regulator_disable_regmap,
|
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
|
|
.get_status = max597x_get_status,
|
|
|
|
.set_over_voltage_protection = max597x_set_ovp,
|
|
|
|
.set_under_voltage_protection = max597x_set_uvp,
|
|
|
|
.set_over_current_protection = max597x_set_ocp,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int max597x_dt_parse(struct device_node *np,
|
|
|
|
const struct regulator_desc *desc,
|
|
|
|
struct regulator_config *cfg)
|
|
|
|
{
|
|
|
|
struct max597x_regulator *data = cfg->driver_data;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
ret =
|
|
|
|
of_property_read_u32(np, "shunt-resistor-micro-ohms",
|
|
|
|
&data->shunt_micro_ohms);
|
|
|
|
if (ret < 0)
|
|
|
|
dev_err(cfg->dev,
|
|
|
|
"property 'shunt-resistor-micro-ohms' not found, err %d\n",
|
|
|
|
ret);
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
#define MAX597X_SWITCH(_ID, _ereg, _chan, _supply) { \
|
|
|
|
.name = #_ID, \
|
|
|
|
.of_match = of_match_ptr(#_ID), \
|
|
|
|
.ops = &max597x_switch_ops, \
|
|
|
|
.regulators_node = of_match_ptr("regulators"), \
|
|
|
|
.type = REGULATOR_VOLTAGE, \
|
|
|
|
.id = MAX597X_##_ID, \
|
|
|
|
.owner = THIS_MODULE, \
|
|
|
|
.supply_name = _supply, \
|
|
|
|
.enable_reg = _ereg, \
|
|
|
|
.enable_mask = CHXEN((_chan)), \
|
|
|
|
.of_parse_cb = max597x_dt_parse, \
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct regulator_desc regulators[] = {
|
|
|
|
MAX597X_SWITCH(SW0, MAX5970_REG_CHXEN, 0, "vss1"),
|
|
|
|
MAX597X_SWITCH(SW1, MAX5970_REG_CHXEN, 1, "vss2"),
|
|
|
|
};
|
|
|
|
|
|
|
|
static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
|
|
|
|
unsigned int *val)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = regmap_read(map, reg, val);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
if (*val)
|
|
|
|
return regmap_write(map, reg, *val);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int max597x_irq_handler(int irq, struct regulator_irq_data *rid,
|
|
|
|
unsigned long *dev_mask)
|
|
|
|
{
|
|
|
|
struct regulator_err_state *stat;
|
|
|
|
struct max597x_regulator *d = (struct max597x_regulator *)rid->data;
|
|
|
|
int val, ret, i;
|
|
|
|
|
|
|
|
ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT0, &val);
|
|
|
|
if (ret)
|
|
|
|
return REGULATOR_FAILED_RETRY;
|
|
|
|
|
|
|
|
*dev_mask = 0;
|
|
|
|
for (i = 0; i < d->num_switches; i++) {
|
|
|
|
stat = &rid->states[i];
|
|
|
|
stat->notifs = 0;
|
|
|
|
stat->errors = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
for (i = 0; i < d->num_switches; i++) {
|
|
|
|
stat = &rid->states[i];
|
|
|
|
|
|
|
|
if (val & UV_STATUS_CRIT(i)) {
|
|
|
|
*dev_mask |= 1 << i;
|
|
|
|
stat->notifs |= REGULATOR_EVENT_UNDER_VOLTAGE;
|
|
|
|
stat->errors |= REGULATOR_ERROR_UNDER_VOLTAGE;
|
|
|
|
} else if (val & UV_STATUS_WARN(i)) {
|
|
|
|
*dev_mask |= 1 << i;
|
|
|
|
stat->notifs |= REGULATOR_EVENT_UNDER_VOLTAGE_WARN;
|
|
|
|
stat->errors |= REGULATOR_ERROR_UNDER_VOLTAGE_WARN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT1, &val);
|
|
|
|
if (ret)
|
|
|
|
return REGULATOR_FAILED_RETRY;
|
|
|
|
|
|
|
|
for (i = 0; i < d->num_switches; i++) {
|
|
|
|
stat = &rid->states[i];
|
|
|
|
|
|
|
|
if (val & OV_STATUS_CRIT(i)) {
|
|
|
|
*dev_mask |= 1 << i;
|
|
|
|
stat->notifs |= REGULATOR_EVENT_REGULATION_OUT;
|
|
|
|
stat->errors |= REGULATOR_ERROR_REGULATION_OUT;
|
|
|
|
} else if (val & OV_STATUS_WARN(i)) {
|
|
|
|
*dev_mask |= 1 << i;
|
|
|
|
stat->notifs |= REGULATOR_EVENT_OVER_VOLTAGE_WARN;
|
|
|
|
stat->errors |= REGULATOR_ERROR_OVER_VOLTAGE_WARN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = max597x_regmap_read_clear(d->regmap, MAX5970_REG_FAULT2, &val);
|
|
|
|
if (ret)
|
|
|
|
return REGULATOR_FAILED_RETRY;
|
|
|
|
|
|
|
|
for (i = 0; i < d->num_switches; i++) {
|
|
|
|
stat = &rid->states[i];
|
|
|
|
|
|
|
|
if (val & OC_STATUS_WARN(i)) {
|
|
|
|
*dev_mask |= 1 << i;
|
|
|
|
stat->notifs |= REGULATOR_EVENT_OVER_CURRENT_WARN;
|
|
|
|
stat->errors |= REGULATOR_ERROR_OVER_CURRENT_WARN;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = regmap_read(d->regmap, MAX5970_REG_STATUS0, &val);
|
|
|
|
if (ret)
|
|
|
|
return REGULATOR_FAILED_RETRY;
|
|
|
|
|
|
|
|
for (i = 0; i < d->num_switches; i++) {
|
|
|
|
stat = &rid->states[i];
|
|
|
|
|
|
|
|
if ((val & MAX5970_CB_IFAULTF(i))
|
|
|
|
|| (val & MAX5970_CB_IFAULTS(i))) {
|
|
|
|
*dev_mask |= 1 << i;
|
|
|
|
stat->notifs |=
|
|
|
|
REGULATOR_EVENT_OVER_CURRENT |
|
|
|
|
REGULATOR_EVENT_DISABLE;
|
|
|
|
stat->errors |=
|
|
|
|
REGULATOR_ERROR_OVER_CURRENT | REGULATOR_ERROR_FAIL;
|
|
|
|
|
|
|
|
/* Clear the sub-IRQ status */
|
|
|
|
regulator_disable_regmap(stat->rdev);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct regmap_config max597x_regmap_config = {
|
|
|
|
.reg_bits = 8,
|
|
|
|
.val_bits = 8,
|
|
|
|
.max_register = MAX_REGISTERS,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int max597x_adc_range(struct regmap *regmap, const int ch,
|
|
|
|
u32 *irng, u32 *mon_rng)
|
|
|
|
{
|
|
|
|
unsigned int reg;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Decode current ADC range */
|
|
|
|
ret = regmap_read(regmap, MAX5970_REG_STATUS2, ®);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
switch (MAX5970_IRNG(reg, ch)) {
|
|
|
|
case 0:
|
|
|
|
*irng = 100000; /* 100 mV */
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
*irng = 50000; /* 50 mV */
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
*irng = 25000; /* 25 mV */
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Decode current voltage monitor range */
|
|
|
|
ret = regmap_read(regmap, MAX5970_REG_MON_RANGE, ®);
|
|
|
|
if (ret)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
*mon_rng = MAX5970_MON_MAX_RANGE_UV >> MAX5970_MON(reg, ch);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int max597x_setup_irq(struct device *dev,
|
|
|
|
int irq,
|
|
|
|
struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES],
|
|
|
|
int num_switches, struct max597x_regulator *data)
|
|
|
|
{
|
|
|
|
struct regulator_irq_desc max597x_notif = {
|
|
|
|
.name = "max597x-irq",
|
|
|
|
.map_event = max597x_irq_handler,
|
|
|
|
.data = data,
|
|
|
|
};
|
|
|
|
int errs = REGULATOR_ERROR_UNDER_VOLTAGE |
|
|
|
|
REGULATOR_ERROR_UNDER_VOLTAGE_WARN |
|
|
|
|
REGULATOR_ERROR_OVER_VOLTAGE_WARN |
|
|
|
|
REGULATOR_ERROR_REGULATION_OUT |
|
|
|
|
REGULATOR_ERROR_OVER_CURRENT |
|
|
|
|
REGULATOR_ERROR_OVER_CURRENT_WARN | REGULATOR_ERROR_FAIL;
|
|
|
|
void *irq_helper;
|
|
|
|
|
|
|
|
/* Register notifiers - can fail if IRQ is not given */
|
|
|
|
irq_helper = devm_regulator_irq_helper(dev, &max597x_notif,
|
|
|
|
irq, 0, errs, NULL,
|
|
|
|
&rdevs[0], num_switches);
|
|
|
|
if (IS_ERR(irq_helper)) {
|
|
|
|
if (PTR_ERR(irq_helper) == -EPROBE_DEFER)
|
|
|
|
return -EPROBE_DEFER;
|
|
|
|
|
|
|
|
dev_warn(dev, "IRQ disabled %pe\n", irq_helper);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int max597x_regulator_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
|
|
|
|
|
|
|
|
struct max597x_data *max597x = dev_get_drvdata(pdev->dev.parent);
|
|
|
|
struct max597x_regulator *data;
|
|
|
|
|
|
|
|
struct regulator_config config = { };
|
|
|
|
struct regulator_dev *rdev;
|
|
|
|
struct regulator_dev *rdevs[MAX5970_NUM_SWITCHES];
|
|
|
|
int num_switches = max597x->num_switches;
|
|
|
|
int ret, i;
|
|
|
|
|
|
|
|
for (i = 0; i < num_switches; i++) {
|
|
|
|
data =
|
|
|
|
devm_kzalloc(max597x->dev, sizeof(struct max597x_regulator),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (!data)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
data->num_switches = num_switches;
|
|
|
|
data->regmap = max597x->regmap;
|
|
|
|
|
|
|
|
ret = max597x_adc_range(data->regmap, i, &max597x->irng[i], &max597x->mon_rng[i]);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
data->irng = max597x->irng[i];
|
|
|
|
data->mon_rng = max597x->mon_rng[i];
|
|
|
|
|
|
|
|
config.dev = max597x->dev;
|
|
|
|
config.driver_data = (void *)data;
|
|
|
|
config.regmap = data->regmap;
|
|
|
|
rdev = devm_regulator_register(max597x->dev,
|
|
|
|
®ulators[i], &config);
|
|
|
|
if (IS_ERR(rdev)) {
|
|
|
|
dev_err(max597x->dev, "failed to register regulator %s\n",
|
|
|
|
regulators[i].name);
|
|
|
|
return PTR_ERR(rdev);
|
|
|
|
}
|
|
|
|
rdevs[i] = rdev;
|
|
|
|
max597x->shunt_micro_ohms[i] = data->shunt_micro_ohms;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (max597x->irq) {
|
|
|
|
ret =
|
|
|
|
max597x_setup_irq(max597x->dev, max597x->irq, rdevs, num_switches,
|
|
|
|
data);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(max597x->dev, "IRQ setup failed");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver max597x_regulator_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "max597x-regulator",
|
|
|
|
},
|
|
|
|
.probe = max597x_regulator_probe,
|
|
|
|
};
|
|
|
|
|
|
|
|
module_platform_driver(max597x_regulator_driver);
|
|
|
|
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Patrick Rudolph <patrick.rudolph@9elements.com>");
|
|
|
|
MODULE_DESCRIPTION("MAX5970_hot-swap controller driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|