UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/net/usb/qmi_wwan.c

884 lines
33 KiB
C
Raw Normal View History

net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
/*
* Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
*
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
* The probing code is heavily inspired by cdc_ether, which is:
* Copyright (C) 2003-2005 by David Brownell
* Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
*
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround) A number of LTE devices from different vendors all suffer from the same firmware bug: Most of the packets received from the device while it is attached to a LTE network will not have an ethernet header. The devices work as expected when attached to 2G or 3G networks, sending an ethernet header with all packets. This driver is not aware of which network the modem attached to, and even if it were there are still some packet types which are always received with the header intact. All devices supported by this driver have severely limited networking capabilities: - can only transmit IPv4, IPv6 and possibly ARP - can only support a single host hardware address at any time - will only do point-to-point communcation with the host Because of this, we are able to reliably identify any bogus raw IP packets by simply looking at the 4 IP version bits. All we need to do is to avoid 4 or 6 in the first digit of the mac address. This workaround ensures this, and fix up the received packets as necessary. Given the distribution of the bug, it is believed that the source is the chipset vendor. The devices which are verified to be affected are: Huawei E392u-12 (Qualcomm MDM9200) Pantech UML290 (Qualcomm MDM9600) Novatel USB551L (Qualcomm MDM9600) Novatel E362 (Qualcomm MDM9600) It is believed that the bug depend on firmware revision, which means that possibly all devices based on the above mentioned chipset may be affected if we consider all available firmware revisions. The information about affected devices and versions is likely incomplete. As the additional overhead for packets not needing this fixup is very small, it is considered acceptable to apply the workaround to all devices handled by this driver. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:09 +08:00
#include <linux/etherdevice.h>
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/usb/cdc.h>
#include <linux/usb/usbnet.h>
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
#include <linux/usb/cdc-wdm.h>
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
/* This driver supports wwan (3G/LTE/?) devices using a vendor
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
* specific management protocol called Qualcomm MSM Interface (QMI) -
* in addition to the more common AT commands over serial interface
* management
*
* QMI is wrapped in CDC, using CDC encapsulated commands on the
* control ("master") interface of a two-interface CDC Union
* resembling standard CDC ECM. The devices do not use the control
* interface for any other CDC messages. Most likely because the
* management protocol is used in place of the standard CDC
* notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE
*
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
* Alternatively, control and data functions can be combined in a
* single USB interface.
*
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
* Handling a protocol like QMI is out of the scope for any driver.
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
* It is exported as a character device using the cdc-wdm driver as
* a subdriver, enabling userspace applications ("modem managers") to
* handle it.
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
*
* These devices may alternatively/additionally be configured using AT
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
* commands on a serial interface
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
*/
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
/* driver specific data */
struct qmi_wwan_state {
struct usb_driver *subdriver;
atomic_t pmcount;
net: qmi_wwan: rearranging to prepare for code sharing Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:00 +08:00
unsigned long unused;
struct usb_interface *control;
struct usb_interface *data;
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
};
net: qmi_wwan: prevent duplicate mac address on link (firmware bug workaround) We normally trust and use the CDC functional descriptors provided by a number of devices. But some of these will erroneously list the address reserved for the device end of the link. Attempting to use this on both the device and host side will naturally not work. Work around this bug by ignoring the functional descriptor and assign a random address instead in this case. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:11 +08:00
/* default ethernet address used by the modem */
static const u8 default_modem_addr[ETH_ALEN] = {0x02, 0x50, 0xf3};
qmi_wwan: Set random MAC on devices with buggy fw Some buggy firmwares export an incorrect MAC address (00:a0:c6:00:00:00). This makes for example checking devices for random MAC addresses tricky, and you might end up with multiple network interfaces with the same address. This patch tries to fix, or at least improve, the situation by setting the MAC address of devices with this firmware bug to a random address. I tested the patch with two devices that has this firmware bug (Huawei E398 and E392), and network traffic worked fine after changing the address. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 23:21:45 +08:00
static const u8 buggy_fw_addr[ETH_ALEN] = {0x00, 0xa0, 0xc6, 0x00, 0x00, 0x00};
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround) A number of LTE devices from different vendors all suffer from the same firmware bug: Most of the packets received from the device while it is attached to a LTE network will not have an ethernet header. The devices work as expected when attached to 2G or 3G networks, sending an ethernet header with all packets. This driver is not aware of which network the modem attached to, and even if it were there are still some packet types which are always received with the header intact. All devices supported by this driver have severely limited networking capabilities: - can only transmit IPv4, IPv6 and possibly ARP - can only support a single host hardware address at any time - will only do point-to-point communcation with the host Because of this, we are able to reliably identify any bogus raw IP packets by simply looking at the 4 IP version bits. All we need to do is to avoid 4 or 6 in the first digit of the mac address. This workaround ensures this, and fix up the received packets as necessary. Given the distribution of the bug, it is believed that the source is the chipset vendor. The devices which are verified to be affected are: Huawei E392u-12 (Qualcomm MDM9200) Pantech UML290 (Qualcomm MDM9600) Novatel USB551L (Qualcomm MDM9600) Novatel E362 (Qualcomm MDM9600) It is believed that the bug depend on firmware revision, which means that possibly all devices based on the above mentioned chipset may be affected if we consider all available firmware revisions. The information about affected devices and versions is likely incomplete. As the additional overhead for packets not needing this fixup is very small, it is considered acceptable to apply the workaround to all devices handled by this driver. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:09 +08:00
/* Make up an ethernet header if the packet doesn't have one.
*
* A firmware bug common among several devices cause them to send raw
* IP packets under some circumstances. There is no way for the
* driver/host to know when this will happen. And even when the bug
* hits, some packets will still arrive with an intact header.
*
* The supported devices are only capably of sending IPv4, IPv6 and
* ARP packets on a point-to-point link. Any packet with an ethernet
* header will have either our address or a broadcast/multicast
* address as destination. ARP packets will always have a header.
*
* This means that this function will reliably add the appropriate
* header iff necessary, provided our hardware address does not start
* with 4 or 6.
net: qmi_wwan: fixup destination address (firmware bug workaround) Received packets are sometimes addressed to 00:a0:c6:00:00:00 instead of the address the device firmware should have learned from the host: 321.224126 77.16.85.204 -> 148.122.171.134 ICMP 98 Echo (ping) request id=0x4025, seq=64/16384, ttl=64 0000 82 c0 82 c9 f1 67 82 c0 82 c9 f1 67 08 00 45 00 .....g.....g..E. 0010 00 54 00 00 40 00 40 01 57 cc 4d 10 55 cc 94 7a .T..@.@.W.M.U..z 0020 ab 86 08 00 62 fc 40 25 00 40 b2 bc 6e 51 00 00 ....b.@%.@..nQ.. 0030 00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15 ..k............. 0040 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 .......... !"#$% 0050 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 &'()*+,-./012345 0060 36 37 67 321.240607 148.122.171.134 -> 77.16.85.204 ICMP 98 Echo (ping) reply id=0x4025, seq=64/16384, ttl=55 0000 00 a0 c6 00 00 00 02 50 f3 00 00 00 08 00 45 00 .......P......E. 0010 00 54 00 56 00 00 37 01 a0 76 94 7a ab 86 4d 10 .T.V..7..v.z..M. 0020 55 cc 00 00 6a fc 40 25 00 40 b2 bc 6e 51 00 00 U...j.@%.@..nQ.. 0030 00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15 ..k............. 0040 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 .......... !"#$% 0050 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 &'()*+,-./012345 0060 36 37 67 The bogus address is always the same, and matches the address suggested by many devices as a default address. It is likely a hardcoded firmware default. The circumstances where this bug has been observed indicates that the trigger is related to timing or some other factor the host cannot control. Repeating the exact same configuration sequence that caused it to trigger once, will not necessarily cause it to trigger the next time. Reproducing the bug is therefore difficult. This opens up a possibility that the bug is more common than we can confirm, because affected devices often will work properly again after a reset. A procedure most users are likely to try out before reporting a bug. Unconditionally rewriting the destination address if the first digit of the received packet is 0, is considered an acceptable compromise since we already have to inspect this digit. The simplification will cause unnecessary rewrites if the real address starts with 0, but this is still better than adding additional tests for this particular case. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:10 +08:00
*
* Another common firmware bug results in all packets being addressed
* to 00:a0:c6:00:00:00 despite the host address being different.
* This function will also fixup such packets.
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround) A number of LTE devices from different vendors all suffer from the same firmware bug: Most of the packets received from the device while it is attached to a LTE network will not have an ethernet header. The devices work as expected when attached to 2G or 3G networks, sending an ethernet header with all packets. This driver is not aware of which network the modem attached to, and even if it were there are still some packet types which are always received with the header intact. All devices supported by this driver have severely limited networking capabilities: - can only transmit IPv4, IPv6 and possibly ARP - can only support a single host hardware address at any time - will only do point-to-point communcation with the host Because of this, we are able to reliably identify any bogus raw IP packets by simply looking at the 4 IP version bits. All we need to do is to avoid 4 or 6 in the first digit of the mac address. This workaround ensures this, and fix up the received packets as necessary. Given the distribution of the bug, it is believed that the source is the chipset vendor. The devices which are verified to be affected are: Huawei E392u-12 (Qualcomm MDM9200) Pantech UML290 (Qualcomm MDM9600) Novatel USB551L (Qualcomm MDM9600) Novatel E362 (Qualcomm MDM9600) It is believed that the bug depend on firmware revision, which means that possibly all devices based on the above mentioned chipset may be affected if we consider all available firmware revisions. The information about affected devices and versions is likely incomplete. As the additional overhead for packets not needing this fixup is very small, it is considered acceptable to apply the workaround to all devices handled by this driver. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:09 +08:00
*/
static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
{
__be16 proto;
usbnet: remove generic hard_header_len check This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: Emil Goode <emilgoode@gmail.com> Reported-by: Igor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-14 00:50:19 +08:00
/* This check is no longer done by usbnet */
if (skb->len < dev->net->hard_header_len)
return 0;
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround) A number of LTE devices from different vendors all suffer from the same firmware bug: Most of the packets received from the device while it is attached to a LTE network will not have an ethernet header. The devices work as expected when attached to 2G or 3G networks, sending an ethernet header with all packets. This driver is not aware of which network the modem attached to, and even if it were there are still some packet types which are always received with the header intact. All devices supported by this driver have severely limited networking capabilities: - can only transmit IPv4, IPv6 and possibly ARP - can only support a single host hardware address at any time - will only do point-to-point communcation with the host Because of this, we are able to reliably identify any bogus raw IP packets by simply looking at the 4 IP version bits. All we need to do is to avoid 4 or 6 in the first digit of the mac address. This workaround ensures this, and fix up the received packets as necessary. Given the distribution of the bug, it is believed that the source is the chipset vendor. The devices which are verified to be affected are: Huawei E392u-12 (Qualcomm MDM9200) Pantech UML290 (Qualcomm MDM9600) Novatel USB551L (Qualcomm MDM9600) Novatel E362 (Qualcomm MDM9600) It is believed that the bug depend on firmware revision, which means that possibly all devices based on the above mentioned chipset may be affected if we consider all available firmware revisions. The information about affected devices and versions is likely incomplete. As the additional overhead for packets not needing this fixup is very small, it is considered acceptable to apply the workaround to all devices handled by this driver. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:09 +08:00
switch (skb->data[0] & 0xf0) {
case 0x40:
proto = htons(ETH_P_IP);
break;
case 0x60:
proto = htons(ETH_P_IPV6);
break;
net: qmi_wwan: fixup destination address (firmware bug workaround) Received packets are sometimes addressed to 00:a0:c6:00:00:00 instead of the address the device firmware should have learned from the host: 321.224126 77.16.85.204 -> 148.122.171.134 ICMP 98 Echo (ping) request id=0x4025, seq=64/16384, ttl=64 0000 82 c0 82 c9 f1 67 82 c0 82 c9 f1 67 08 00 45 00 .....g.....g..E. 0010 00 54 00 00 40 00 40 01 57 cc 4d 10 55 cc 94 7a .T..@.@.W.M.U..z 0020 ab 86 08 00 62 fc 40 25 00 40 b2 bc 6e 51 00 00 ....b.@%.@..nQ.. 0030 00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15 ..k............. 0040 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 .......... !"#$% 0050 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 &'()*+,-./012345 0060 36 37 67 321.240607 148.122.171.134 -> 77.16.85.204 ICMP 98 Echo (ping) reply id=0x4025, seq=64/16384, ttl=55 0000 00 a0 c6 00 00 00 02 50 f3 00 00 00 08 00 45 00 .......P......E. 0010 00 54 00 56 00 00 37 01 a0 76 94 7a ab 86 4d 10 .T.V..7..v.z..M. 0020 55 cc 00 00 6a fc 40 25 00 40 b2 bc 6e 51 00 00 U...j.@%.@..nQ.. 0030 00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15 ..k............. 0040 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 .......... !"#$% 0050 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 &'()*+,-./012345 0060 36 37 67 The bogus address is always the same, and matches the address suggested by many devices as a default address. It is likely a hardcoded firmware default. The circumstances where this bug has been observed indicates that the trigger is related to timing or some other factor the host cannot control. Repeating the exact same configuration sequence that caused it to trigger once, will not necessarily cause it to trigger the next time. Reproducing the bug is therefore difficult. This opens up a possibility that the bug is more common than we can confirm, because affected devices often will work properly again after a reset. A procedure most users are likely to try out before reporting a bug. Unconditionally rewriting the destination address if the first digit of the received packet is 0, is considered an acceptable compromise since we already have to inspect this digit. The simplification will cause unnecessary rewrites if the real address starts with 0, but this is still better than adding additional tests for this particular case. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:10 +08:00
case 0x00:
if (is_multicast_ether_addr(skb->data))
return 1;
/* possibly bogus destination - rewrite just in case */
skb_reset_mac_header(skb);
goto fix_dest;
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround) A number of LTE devices from different vendors all suffer from the same firmware bug: Most of the packets received from the device while it is attached to a LTE network will not have an ethernet header. The devices work as expected when attached to 2G or 3G networks, sending an ethernet header with all packets. This driver is not aware of which network the modem attached to, and even if it were there are still some packet types which are always received with the header intact. All devices supported by this driver have severely limited networking capabilities: - can only transmit IPv4, IPv6 and possibly ARP - can only support a single host hardware address at any time - will only do point-to-point communcation with the host Because of this, we are able to reliably identify any bogus raw IP packets by simply looking at the 4 IP version bits. All we need to do is to avoid 4 or 6 in the first digit of the mac address. This workaround ensures this, and fix up the received packets as necessary. Given the distribution of the bug, it is believed that the source is the chipset vendor. The devices which are verified to be affected are: Huawei E392u-12 (Qualcomm MDM9200) Pantech UML290 (Qualcomm MDM9600) Novatel USB551L (Qualcomm MDM9600) Novatel E362 (Qualcomm MDM9600) It is believed that the bug depend on firmware revision, which means that possibly all devices based on the above mentioned chipset may be affected if we consider all available firmware revisions. The information about affected devices and versions is likely incomplete. As the additional overhead for packets not needing this fixup is very small, it is considered acceptable to apply the workaround to all devices handled by this driver. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:09 +08:00
default:
/* pass along other packets without modifications */
return 1;
}
if (skb_headroom(skb) < ETH_HLEN)
return 0;
skb_push(skb, ETH_HLEN);
skb_reset_mac_header(skb);
eth_hdr(skb)->h_proto = proto;
net: usb: Use eth_<foo>_addr instead of memset Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03 11:54:48 +08:00
eth_zero_addr(eth_hdr(skb)->h_source);
net: qmi_wwan: fixup destination address (firmware bug workaround) Received packets are sometimes addressed to 00:a0:c6:00:00:00 instead of the address the device firmware should have learned from the host: 321.224126 77.16.85.204 -> 148.122.171.134 ICMP 98 Echo (ping) request id=0x4025, seq=64/16384, ttl=64 0000 82 c0 82 c9 f1 67 82 c0 82 c9 f1 67 08 00 45 00 .....g.....g..E. 0010 00 54 00 00 40 00 40 01 57 cc 4d 10 55 cc 94 7a .T..@.@.W.M.U..z 0020 ab 86 08 00 62 fc 40 25 00 40 b2 bc 6e 51 00 00 ....b.@%.@..nQ.. 0030 00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15 ..k............. 0040 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 .......... !"#$% 0050 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 &'()*+,-./012345 0060 36 37 67 321.240607 148.122.171.134 -> 77.16.85.204 ICMP 98 Echo (ping) reply id=0x4025, seq=64/16384, ttl=55 0000 00 a0 c6 00 00 00 02 50 f3 00 00 00 08 00 45 00 .......P......E. 0010 00 54 00 56 00 00 37 01 a0 76 94 7a ab 86 4d 10 .T.V..7..v.z..M. 0020 55 cc 00 00 6a fc 40 25 00 40 b2 bc 6e 51 00 00 U...j.@%.@..nQ.. 0030 00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15 ..k............. 0040 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 .......... !"#$% 0050 26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35 &'()*+,-./012345 0060 36 37 67 The bogus address is always the same, and matches the address suggested by many devices as a default address. It is likely a hardcoded firmware default. The circumstances where this bug has been observed indicates that the trigger is related to timing or some other factor the host cannot control. Repeating the exact same configuration sequence that caused it to trigger once, will not necessarily cause it to trigger the next time. Reproducing the bug is therefore difficult. This opens up a possibility that the bug is more common than we can confirm, because affected devices often will work properly again after a reset. A procedure most users are likely to try out before reporting a bug. Unconditionally rewriting the destination address if the first digit of the received packet is 0, is considered an acceptable compromise since we already have to inspect this digit. The simplification will cause unnecessary rewrites if the real address starts with 0, but this is still better than adding additional tests for this particular case. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:10 +08:00
fix_dest:
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround) A number of LTE devices from different vendors all suffer from the same firmware bug: Most of the packets received from the device while it is attached to a LTE network will not have an ethernet header. The devices work as expected when attached to 2G or 3G networks, sending an ethernet header with all packets. This driver is not aware of which network the modem attached to, and even if it were there are still some packet types which are always received with the header intact. All devices supported by this driver have severely limited networking capabilities: - can only transmit IPv4, IPv6 and possibly ARP - can only support a single host hardware address at any time - will only do point-to-point communcation with the host Because of this, we are able to reliably identify any bogus raw IP packets by simply looking at the 4 IP version bits. All we need to do is to avoid 4 or 6 in the first digit of the mac address. This workaround ensures this, and fix up the received packets as necessary. Given the distribution of the bug, it is believed that the source is the chipset vendor. The devices which are verified to be affected are: Huawei E392u-12 (Qualcomm MDM9200) Pantech UML290 (Qualcomm MDM9600) Novatel USB551L (Qualcomm MDM9600) Novatel E362 (Qualcomm MDM9600) It is believed that the bug depend on firmware revision, which means that possibly all devices based on the above mentioned chipset may be affected if we consider all available firmware revisions. The information about affected devices and versions is likely incomplete. As the additional overhead for packets not needing this fixup is very small, it is considered acceptable to apply the workaround to all devices handled by this driver. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:09 +08:00
memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
return 1;
}
/* very simplistic detection of IPv4 or IPv6 headers */
static bool possibly_iphdr(const char *data)
{
return (data[0] & 0xd0) == 0x40;
}
/* disallow addresses which may be confused with IP headers */
static int qmi_wwan_mac_addr(struct net_device *dev, void *p)
{
int ret;
struct sockaddr *addr = p;
ret = eth_prepare_mac_addr_change(dev, p);
if (ret < 0)
return ret;
if (possibly_iphdr(addr->sa_data))
return -EADDRNOTAVAIL;
eth_commit_mac_addr_change(dev, p);
return 0;
}
static const struct net_device_ops qmi_wwan_netdev_ops = {
.ndo_open = usbnet_open,
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
.ndo_change_mtu = usbnet_change_mtu,
.ndo_set_mac_address = qmi_wwan_mac_addr,
.ndo_validate_addr = eth_validate_addr,
};
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
/* using a counter to merge subdriver requests with our own into a
* combined state
*/
net: qmi_wwan: rearranging to prepare for code sharing Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:00 +08:00
static int qmi_wwan_manage_power(struct usbnet *dev, int on)
{
struct qmi_wwan_state *info = (void *)&dev->data;
net: qmi_wwan: manage_power should always set needs_remote_wakeup Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-01 21:18:53 +08:00
int rv;
net: qmi_wwan: rearranging to prepare for code sharing Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:00 +08:00
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__,
atomic_read(&info->pmcount), on);
net: qmi_wwan: rearranging to prepare for code sharing Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:00 +08:00
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
if ((on && atomic_add_return(1, &info->pmcount) == 1) ||
(!on && atomic_dec_and_test(&info->pmcount))) {
/* need autopm_get/put here to ensure the usbcore sees
* the new value
*/
net: qmi_wwan: rearranging to prepare for code sharing Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:00 +08:00
rv = usb_autopm_get_interface(dev->intf);
dev->intf->needs_remote_wakeup = on;
net: qmi_wwan: manage_power should always set needs_remote_wakeup Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-01 21:18:53 +08:00
if (!rv)
usb_autopm_put_interface(dev->intf);
net: qmi_wwan: rearranging to prepare for code sharing Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:00 +08:00
}
net: qmi_wwan: manage_power should always set needs_remote_wakeup Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-01 21:18:53 +08:00
return 0;
net: qmi_wwan: rearranging to prepare for code sharing Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:00 +08:00
}
static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
{
struct usbnet *dev = usb_get_intfdata(intf);
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net Conflicts: drivers/net/caif/caif_hsi.c drivers/net/usb/qmi_wwan.c The qmi_wwan merge was trivial. The caif_hsi.c, on the other hand, was not. It's a conflict between 1c385f1fdf6f9c66d982802cd74349c040980b50 ("caif-hsi: Replace platform device with ops structure.") in the net-next tree and commit 39abbaef19cd0a30be93794aa4773c779c3eb1f3 ("caif-hsi: Postpone init of HIS until open()") in the net tree. I did my best with that one and will ask Sjur to check it out. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-29 08:37:00 +08:00
/* can be called while disconnecting */
if (!dev)
return 0;
net: qmi_wwan: rearranging to prepare for code sharing Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:00 +08:00
return qmi_wwan_manage_power(dev, on);
}
/* collect all three endpoints and register subdriver */
static int qmi_wwan_register_subdriver(struct usbnet *dev)
{
int rv;
struct usb_driver *subdriver = NULL;
struct qmi_wwan_state *info = (void *)&dev->data;
/* collect bulk endpoints */
rv = usbnet_get_endpoints(dev, info->data);
if (rv < 0)
goto err;
/* update status endpoint if separate control interface */
if (info->control != info->data)
dev->status = &info->control->cur_altsetting->endpoint[0];
/* require interrupt endpoint for subdriver */
if (!dev->status) {
rv = -EINVAL;
goto err;
}
/* for subdriver power management */
atomic_set(&info->pmcount, 0);
/* register subdriver */
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc,
4096, &qmi_wwan_cdc_wdm_manage_power);
net: qmi_wwan: rearranging to prepare for code sharing Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:00 +08:00
if (IS_ERR(subdriver)) {
dev_err(&info->control->dev, "subdriver registration failed\n");
rv = PTR_ERR(subdriver);
goto err;
}
/* prevent usbnet from using status endpoint */
dev->status = NULL;
/* save subdriver struct for suspend/resume wrappers */
info->subdriver = subdriver;
err:
return rv;
}
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
{
int status = -1;
u8 *buf = intf->cur_altsetting->extra;
int len = intf->cur_altsetting->extralen;
struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
struct usb_cdc_union_desc *cdc_union = NULL;
struct usb_cdc_ether_desc *cdc_ether = NULL;
u32 found = 0;
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
struct usb_driver *driver = driver_of(intf);
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
struct qmi_wwan_state *info = (void *)&dev->data;
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) <
sizeof(struct qmi_wwan_state)));
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
net: qmi_wwan: set correct altsetting for Gobi 1K devices commit bd877e4 ("net: qmi_wwan: use a single bind function for all device types") made Gobi 1K devices fail probing. Using the number of endpoints in the default altsetting to decide whether the function use one or two interfaces is wrong. Other altsettings may provide more endpoints. With Gobi 1K devices, USB interface #3's altsetting is 0 by default, but altsetting 0 only provides one interrupt endpoint and is not sufficent for QMI. Altsetting 1 provides all 3 endpoints required for qmi_wwan and works with QMI. Gobi 1K layout for intf#3 is: Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 0 Endpoint Descriptor: Interrupt IN Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 1 Endpoint Descriptor: Interrupt IN Endpoint Descriptor: Bulk IN Endpoint Descriptor: Bulk OUT Prior to commit bd877e4, we would call usbnet_get_endpoints before giving up finding enough endpoints. Removing the early endpoint number test and the strict functional descriptor requirement allow qmi_wwan_bind to continue until usbnet_get_endpoints has made the final attempt to collect endpoints. This restores the behaviour from before commit bd877e4 without losing the added benefit of using a single bind function. The driver has always required a CDC Union functional descriptor for two-interface functions. Using the existence of this descriptor to detect two-interface functions is the logically correct method. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13 10:25:17 +08:00
/* set up initial state */
info->control = intf;
info->data = intf;
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
net: qmi_wwan: use a single bind function for all device types Refactoring the bind code lets us use a common driver_info struct for all supported devices, simplifying the code a bit. The real advantage is that devices using the CDC ECM interface layout now also can be added dynamically using the new_id sysfs interface. This simplifies testing of new devices. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 15:36:07 +08:00
/* and a number of CDC descriptors */
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
while (len > 3) {
struct usb_descriptor_header *h = (void *)buf;
/* ignore any misplaced descriptors */
if (h->bDescriptorType != USB_DT_CS_INTERFACE)
goto next_desc;
/* buf[2] is CDC descriptor subtype */
switch (buf[2]) {
case USB_CDC_HEADER_TYPE:
if (found & 1 << USB_CDC_HEADER_TYPE) {
dev_dbg(&intf->dev, "extra CDC header\n");
goto err;
}
if (h->bLength != sizeof(struct usb_cdc_header_desc)) {
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
dev_dbg(&intf->dev, "CDC header len %u\n",
h->bLength);
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
goto err;
}
break;
case USB_CDC_UNION_TYPE:
if (found & 1 << USB_CDC_UNION_TYPE) {
dev_dbg(&intf->dev, "extra CDC union\n");
goto err;
}
if (h->bLength != sizeof(struct usb_cdc_union_desc)) {
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
dev_dbg(&intf->dev, "CDC union len %u\n",
h->bLength);
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
goto err;
}
cdc_union = (struct usb_cdc_union_desc *)buf;
break;
case USB_CDC_ETHERNET_TYPE:
if (found & 1 << USB_CDC_ETHERNET_TYPE) {
dev_dbg(&intf->dev, "extra CDC ether\n");
goto err;
}
if (h->bLength != sizeof(struct usb_cdc_ether_desc)) {
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
dev_dbg(&intf->dev, "CDC ether len %u\n",
h->bLength);
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
goto err;
}
cdc_ether = (struct usb_cdc_ether_desc *)buf;
break;
}
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
/* Remember which CDC functional descriptors we've seen. Works
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
* for all types we care about, of which USB_CDC_ETHERNET_TYPE
* (0x0f) is the highest numbered
*/
if (buf[2] < 32)
found |= 1 << buf[2];
next_desc:
len -= h->bLength;
buf += h->bLength;
}
net: qmi_wwan: set correct altsetting for Gobi 1K devices commit bd877e4 ("net: qmi_wwan: use a single bind function for all device types") made Gobi 1K devices fail probing. Using the number of endpoints in the default altsetting to decide whether the function use one or two interfaces is wrong. Other altsettings may provide more endpoints. With Gobi 1K devices, USB interface #3's altsetting is 0 by default, but altsetting 0 only provides one interrupt endpoint and is not sufficent for QMI. Altsetting 1 provides all 3 endpoints required for qmi_wwan and works with QMI. Gobi 1K layout for intf#3 is: Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 0 Endpoint Descriptor: Interrupt IN Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 1 Endpoint Descriptor: Interrupt IN Endpoint Descriptor: Bulk IN Endpoint Descriptor: Bulk OUT Prior to commit bd877e4, we would call usbnet_get_endpoints before giving up finding enough endpoints. Removing the early endpoint number test and the strict functional descriptor requirement allow qmi_wwan_bind to continue until usbnet_get_endpoints has made the final attempt to collect endpoints. This restores the behaviour from before commit bd877e4 without losing the added benefit of using a single bind function. The driver has always required a CDC Union functional descriptor for two-interface functions. Using the existence of this descriptor to detect two-interface functions is the logically correct method. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13 10:25:17 +08:00
/* Use separate control and data interfaces if we found a CDC Union */
if (cdc_union) {
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
info->data = usb_ifnum_to_if(dev->udev,
cdc_union->bSlaveInterface0);
if (desc->bInterfaceNumber != cdc_union->bMasterInterface0 ||
!info->data) {
dev_err(&intf->dev,
"bogus CDC Union: master=%u, slave=%u\n",
cdc_union->bMasterInterface0,
cdc_union->bSlaveInterface0);
net: qmi_wwan: set correct altsetting for Gobi 1K devices commit bd877e4 ("net: qmi_wwan: use a single bind function for all device types") made Gobi 1K devices fail probing. Using the number of endpoints in the default altsetting to decide whether the function use one or two interfaces is wrong. Other altsettings may provide more endpoints. With Gobi 1K devices, USB interface #3's altsetting is 0 by default, but altsetting 0 only provides one interrupt endpoint and is not sufficent for QMI. Altsetting 1 provides all 3 endpoints required for qmi_wwan and works with QMI. Gobi 1K layout for intf#3 is: Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 0 Endpoint Descriptor: Interrupt IN Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 1 Endpoint Descriptor: Interrupt IN Endpoint Descriptor: Bulk IN Endpoint Descriptor: Bulk OUT Prior to commit bd877e4, we would call usbnet_get_endpoints before giving up finding enough endpoints. Removing the early endpoint number test and the strict functional descriptor requirement allow qmi_wwan_bind to continue until usbnet_get_endpoints has made the final attempt to collect endpoints. This restores the behaviour from before commit bd877e4 without losing the added benefit of using a single bind function. The driver has always required a CDC Union functional descriptor for two-interface functions. Using the existence of this descriptor to detect two-interface functions is the logically correct method. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13 10:25:17 +08:00
goto err;
}
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
}
/* errors aren't fatal - we can live with the dynamic address */
if (cdc_ether) {
dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize);
usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress);
}
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
/* claim data interface and set it up */
net: qmi_wwan: set correct altsetting for Gobi 1K devices commit bd877e4 ("net: qmi_wwan: use a single bind function for all device types") made Gobi 1K devices fail probing. Using the number of endpoints in the default altsetting to decide whether the function use one or two interfaces is wrong. Other altsettings may provide more endpoints. With Gobi 1K devices, USB interface #3's altsetting is 0 by default, but altsetting 0 only provides one interrupt endpoint and is not sufficent for QMI. Altsetting 1 provides all 3 endpoints required for qmi_wwan and works with QMI. Gobi 1K layout for intf#3 is: Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 0 Endpoint Descriptor: Interrupt IN Interface Descriptor: 255/255/255 bInterfaceNumber 3 bAlternateSetting 1 Endpoint Descriptor: Interrupt IN Endpoint Descriptor: Bulk IN Endpoint Descriptor: Bulk OUT Prior to commit bd877e4, we would call usbnet_get_endpoints before giving up finding enough endpoints. Removing the early endpoint number test and the strict functional descriptor requirement allow qmi_wwan_bind to continue until usbnet_get_endpoints has made the final attempt to collect endpoints. This restores the behaviour from before commit bd877e4 without losing the added benefit of using a single bind function. The driver has always required a CDC Union functional descriptor for two-interface functions. Using the existence of this descriptor to detect two-interface functions is the logically correct method. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Tested-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-13 10:25:17 +08:00
if (info->control != info->data) {
status = usb_driver_claim_interface(driver, info->data, dev);
if (status < 0)
goto err;
}
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
status = qmi_wwan_register_subdriver(dev);
net: qmi_wwan: use a single bind function for all device types Refactoring the bind code lets us use a common driver_info struct for all supported devices, simplifying the code a bit. The real advantage is that devices using the CDC ECM interface layout now also can be added dynamically using the new_id sysfs interface. This simplifies testing of new devices. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 15:36:07 +08:00
if (status < 0 && info->control != info->data) {
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
usb_set_intfdata(info->data, NULL);
usb_driver_release_interface(driver, info->data);
}
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
qmi_wwan: Set random MAC on devices with buggy fw Some buggy firmwares export an incorrect MAC address (00:a0:c6:00:00:00). This makes for example checking devices for random MAC addresses tricky, and you might end up with multiple network interfaces with the same address. This patch tries to fix, or at least improve, the situation by setting the MAC address of devices with this firmware bug to a random address. I tested the patch with two devices that has this firmware bug (Huawei E398 and E392), and network traffic worked fine after changing the address. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 23:21:45 +08:00
/* Never use the same address on both ends of the link, even if the
* buggy firmware told us to. Or, if device is assigned the well-known
* buggy firmware MAC address, replace it with a random address,
net: qmi_wwan: prevent duplicate mac address on link (firmware bug workaround) We normally trust and use the CDC functional descriptors provided by a number of devices. But some of these will erroneously list the address reserved for the device end of the link. Attempting to use this on both the device and host side will naturally not work. Work around this bug by ignoring the functional descriptor and assign a random address instead in this case. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:11 +08:00
*/
qmi_wwan: Set random MAC on devices with buggy fw Some buggy firmwares export an incorrect MAC address (00:a0:c6:00:00:00). This makes for example checking devices for random MAC addresses tricky, and you might end up with multiple network interfaces with the same address. This patch tries to fix, or at least improve, the situation by setting the MAC address of devices with this firmware bug to a random address. I tested the patch with two devices that has this firmware bug (Huawei E398 and E392), and network traffic worked fine after changing the address. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 23:21:45 +08:00
if (ether_addr_equal(dev->net->dev_addr, default_modem_addr) ||
ether_addr_equal(dev->net->dev_addr, buggy_fw_addr))
net: qmi_wwan: prevent duplicate mac address on link (firmware bug workaround) We normally trust and use the CDC functional descriptors provided by a number of devices. But some of these will erroneously list the address reserved for the device end of the link. Attempting to use this on both the device and host side will naturally not work. Work around this bug by ignoring the functional descriptor and assign a random address instead in this case. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:11 +08:00
eth_hw_addr_random(dev->net);
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround) A number of LTE devices from different vendors all suffer from the same firmware bug: Most of the packets received from the device while it is attached to a LTE network will not have an ethernet header. The devices work as expected when attached to 2G or 3G networks, sending an ethernet header with all packets. This driver is not aware of which network the modem attached to, and even if it were there are still some packet types which are always received with the header intact. All devices supported by this driver have severely limited networking capabilities: - can only transmit IPv4, IPv6 and possibly ARP - can only support a single host hardware address at any time - will only do point-to-point communcation with the host Because of this, we are able to reliably identify any bogus raw IP packets by simply looking at the 4 IP version bits. All we need to do is to avoid 4 or 6 in the first digit of the mac address. This workaround ensures this, and fix up the received packets as necessary. Given the distribution of the bug, it is believed that the source is the chipset vendor. The devices which are verified to be affected are: Huawei E392u-12 (Qualcomm MDM9200) Pantech UML290 (Qualcomm MDM9600) Novatel USB551L (Qualcomm MDM9600) Novatel E362 (Qualcomm MDM9600) It is believed that the bug depend on firmware revision, which means that possibly all devices based on the above mentioned chipset may be affected if we consider all available firmware revisions. The information about affected devices and versions is likely incomplete. As the additional overhead for packets not needing this fixup is very small, it is considered acceptable to apply the workaround to all devices handled by this driver. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:09 +08:00
/* make MAC addr easily distinguishable from an IP header */
if (possibly_iphdr(dev->net->dev_addr)) {
dev->net->dev_addr[0] |= 0x02; /* set local assignment bit */
dev->net->dev_addr[0] &= 0xbf; /* clear "IP" bit */
}
dev->net->netdev_ops = &qmi_wwan_netdev_ops;
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
err:
return status;
}
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
{
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
struct qmi_wwan_state *info = (void *)&dev->data;
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
struct usb_driver *driver = driver_of(intf);
struct usb_interface *other;
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
if (info->subdriver && info->subdriver->disconnect)
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
info->subdriver->disconnect(info->control);
/* allow user to unbind using either control or data */
if (intf == info->control)
other = info->data;
else
other = info->control;
/* only if not shared */
if (other && intf != other) {
usb_set_intfdata(other, NULL);
usb_driver_release_interface(driver, other);
}
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
info->subdriver = NULL;
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
info->data = NULL;
info->control = NULL;
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
}
/* suspend/resume wrappers calling both usbnet and the cdc-wdm
* subdriver if present.
*
* NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
* wrappers for those without adding usbnet reset support first.
*/
static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
{
struct usbnet *dev = usb_get_intfdata(intf);
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
struct qmi_wwan_state *info = (void *)&dev->data;
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
int ret;
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
/* Both usbnet_suspend() and subdriver->suspend() MUST return 0
usbnet: qmi_wwan: comments on suspend failure If suspend callback fails in system sleep context, usb core will ignore the failure and let system sleep go ahead further, so this patch comments on the case and requires that both usbnet_suspend() and subdriver->suspend() MUST return 0 in system sleep context. Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-03-15 12:08:57 +08:00
* in system sleep context, otherwise, the resume callback has
* to recover device from previous suspend failure.
*/
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
ret = usbnet_suspend(intf, message);
if (ret < 0)
goto err;
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
if (intf == info->control && info->subdriver &&
info->subdriver->suspend)
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
ret = info->subdriver->suspend(intf, message);
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
if (ret < 0)
usbnet_resume(intf);
err:
return ret;
}
static int qmi_wwan_resume(struct usb_interface *intf)
{
struct usbnet *dev = usb_get_intfdata(intf);
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
struct qmi_wwan_state *info = (void *)&dev->data;
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
int ret = 0;
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
bool callsub = (intf == info->control && info->subdriver &&
info->subdriver->resume);
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
net: qmi_wwan: call subdriver with control intf only This fixes a hang on suspend due to calling wdm_suspend on the unregistered data interface. The hang should have been a NULL pointer reference had it not been for a logic error in the cdc_wdm code. commit 230718bd net: qmi_wwan: bind to both control and data interface changed qmi_wwan to use cdc_wdm as a subdriver for devices with a two-interface QMI/wwan function. The commit failed to update qmi_wwan_suspend and qmi_wwan_resume, which were written to handle either a single combined interface function, or no subdriver at all. The result was that we called into the subdriver both when the control interface was suspended and when the data interface was suspended. Calling the subdriver suspend function with an unregistered interface is not supported and will make the subdriver bug out. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-13 04:44:35 +08:00
if (callsub)
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
ret = info->subdriver->resume(intf);
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
if (ret < 0)
goto err;
ret = usbnet_resume(intf);
net: qmi_wwan: no need to check for resume if suspend exists Reported-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-01 21:18:54 +08:00
if (ret < 0 && callsub)
net: qmi_wwan: define a structure for driver specific state usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:41:59 +08:00
info->subdriver->suspend(intf, PMSG_SUSPEND);
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
err:
return ret;
}
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
static const struct driver_info qmi_wwan_info = {
net: qmi_wwan: shorten driver description The description is used in ethtool fixed length fields. Make it shorter to avoid truncation. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:02 +08:00
.description = "WWAN/QMI device",
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
.flags = FLAG_WWAN,
.bind = qmi_wwan_bind,
net: qmi_wwan: bind to both control and data interface Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:01 +08:00
.unbind = qmi_wwan_unbind,
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
.manage_power = qmi_wwan_manage_power,
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround) A number of LTE devices from different vendors all suffer from the same firmware bug: Most of the packets received from the device while it is attached to a LTE network will not have an ethernet header. The devices work as expected when attached to 2G or 3G networks, sending an ethernet header with all packets. This driver is not aware of which network the modem attached to, and even if it were there are still some packet types which are always received with the header intact. All devices supported by this driver have severely limited networking capabilities: - can only transmit IPv4, IPv6 and possibly ARP - can only support a single host hardware address at any time - will only do point-to-point communcation with the host Because of this, we are able to reliably identify any bogus raw IP packets by simply looking at the 4 IP version bits. All we need to do is to avoid 4 or 6 in the first digit of the mac address. This workaround ensures this, and fix up the received packets as necessary. Given the distribution of the bug, it is believed that the source is the chipset vendor. The devices which are verified to be affected are: Huawei E392u-12 (Qualcomm MDM9200) Pantech UML290 (Qualcomm MDM9600) Novatel USB551L (Qualcomm MDM9600) Novatel E362 (Qualcomm MDM9600) It is believed that the bug depend on firmware revision, which means that possibly all devices based on the above mentioned chipset may be affected if we consider all available firmware revisions. The information about affected devices and versions is likely incomplete. As the additional overhead for packets not needing this fixup is very small, it is considered acceptable to apply the workaround to all devices handled by this driver. Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 20:57:09 +08:00
.rx_fixup = qmi_wwan_rx_fixup,
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
};
#define HUAWEI_VENDOR_ID 0x12D1
net: qmi_wwan: fix Gobi device probing Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by: Heinrich Siebmanns (Harvey) <H.Siebmanns@t-online.de> Cc: <stable@vger.kernel.org> # v3.4: 0000188 USB: qmi_wwan: Make forced int 4 whitelist generic Cc: <stable@vger.kernel.org> # v3.4: f7142e6 USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z Cc: <stable@vger.kernel.org> # v3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-21 10:45:58 +08:00
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
/* map QMI/wwan function by a fixed interface number */
#define QMI_FIXED_INTF(vend, prod, num) \
USB_DEVICE_INTERFACE_NUMBER(vend, prod, num), \
net: qmi_wwan: use a single bind function for all device types Refactoring the bind code lets us use a common driver_info struct for all supported devices, simplifying the code a bit. The real advantage is that devices using the CDC ECM interface layout now also can be added dynamically using the new_id sysfs interface. This simplifies testing of new devices. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 15:36:07 +08:00
.driver_info = (unsigned long)&qmi_wwan_info
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
net: qmi_wwan: fix Gobi device probing Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by: Heinrich Siebmanns (Harvey) <H.Siebmanns@t-online.de> Cc: <stable@vger.kernel.org> # v3.4: 0000188 USB: qmi_wwan: Make forced int 4 whitelist generic Cc: <stable@vger.kernel.org> # v3.4: f7142e6 USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z Cc: <stable@vger.kernel.org> # v3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-21 10:45:58 +08:00
/* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
#define QMI_GOBI1K_DEVICE(vend, prod) \
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
QMI_FIXED_INTF(vend, prod, 3)
net: qmi_wwan: fix Gobi device probing Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by: Heinrich Siebmanns (Harvey) <H.Siebmanns@t-online.de> Cc: <stable@vger.kernel.org> # v3.4: 0000188 USB: qmi_wwan: Make forced int 4 whitelist generic Cc: <stable@vger.kernel.org> # v3.4: f7142e6 USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z Cc: <stable@vger.kernel.org> # v3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-21 10:45:58 +08:00
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
/* Gobi 2000/3000 QMI/wwan interface number is 0 according to qcserial */
net: qmi_wwan: add Gobi and Pantech UML290 device IDs Adding the Pantech UML290 and all non-QDL Gobi device IDs from the qcserial driver now that we have support for shared net/QMI USB interfaces. Most of these are not yet tested with this driver, but should be mostly identical to tested devices, except for device IDs. Gobi devices provide several different interfaces (serial/net/other) using the exact same class, subclass and protocol values. This driver will only support the net/QMI function while there are other drivers supporting other device functions. The net/QMI interface number may also differ from device to device. It has been noted that all the other interfaces have additional functional descriptors, so we use that to detect the interface supported by this driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:06 +08:00
#define QMI_GOBI_DEVICE(vend, prod) \
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
QMI_FIXED_INTF(vend, prod, 0)
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
static const struct usb_device_id products[] = {
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
/* 1. CDC ECM like devices match on the control interface */
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
{ /* Huawei E392, E398 and possibly others sharing both device id and more... */
net: qmi_wwan: compress device_id list using macros Take advantage of the matching macros to make the device id list easier to read and maintain. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:32 +08:00
USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 9),
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
.driver_info = (unsigned long)&qmi_wwan_info,
},
net: qmi_wwan: Add Vodafone/Huawei K5005 support Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19 15:20:31 +08:00
{ /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
net: qmi_wwan: compress device_id list using macros Take advantage of the matching macros to make the device id list easier to read and maintain. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:32 +08:00
USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 57),
net: qmi_wwan: Add Vodafone/Huawei K5005 support Tested-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-19 15:20:31 +08:00
.driver_info = (unsigned long)&qmi_wwan_info,
},
net: qmi_wwan: add more Huawei devices, including E320 Adding new class/subclass/protocol combinations based on the GPLed out-of-tree Huawei driver. One of these has already appeared on a device labelled as "E320". Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 13:22:08 +08:00
{ /* HUAWEI_INTERFACE_NDIS_CONTROL_QUALCOMM */
USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x69),
.driver_info = (unsigned long)&qmi_wwan_info,
},
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
/* 2. Combined interface devices matching on class+protocol */
net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19 18:03:36 +08:00
{ /* Huawei E367 and possibly others in "Windows mode" */
net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20 05:18:05 +08:00
USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7),
.driver_info = (unsigned long)&qmi_wwan_info,
},
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
{ /* Huawei E392, E398 and possibly others in "Windows mode" */
net: qmi_wwan: compress device_id list using macros Take advantage of the matching macros to make the device id list easier to read and maintain. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:32 +08:00
USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17),
net: qmi_wwan: use a single bind function for all device types Refactoring the bind code lets us use a common driver_info struct for all supported devices, simplifying the code a bit. The real advantage is that devices using the CDC ECM interface layout now also can be added dynamically using the new_id sysfs interface. This simplifies testing of new devices. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 15:36:07 +08:00
.driver_info = (unsigned long)&qmi_wwan_info,
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
},
net: qmi_wwan: add more Huawei devices, including E320 Adding new class/subclass/protocol combinations based on the GPLed out-of-tree Huawei driver. One of these has already appeared on a device labelled as "E320". Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-06 13:22:08 +08:00
{ /* HUAWEI_NDIS_SINGLE_INTERFACE_VDF */
USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x37),
.driver_info = (unsigned long)&qmi_wwan_info,
},
{ /* HUAWEI_INTERFACE_NDIS_HW_QUALCOMM */
USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 0x01, 0x67),
.driver_info = (unsigned long)&qmi_wwan_info,
},
net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-19 18:03:36 +08:00
{ /* Pantech UML290, P4200 and more */
net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20 05:18:05 +08:00
USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff),
net: qmi_wwan: use a single bind function for all device types Refactoring the bind code lets us use a common driver_info struct for all supported devices, simplifying the code a bit. The real advantage is that devices using the CDC ECM interface layout now also can be added dynamically using the new_id sysfs interface. This simplifies testing of new devices. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 15:36:07 +08:00
.driver_info = (unsigned long)&qmi_wwan_info,
net: qmi_wwan: add Gobi and Pantech UML290 device IDs Adding the Pantech UML290 and all non-QDL Gobi device IDs from the qcserial driver now that we have support for shared net/QMI USB interfaces. Most of these are not yet tested with this driver, but should be mostly identical to tested devices, except for device IDs. Gobi devices provide several different interfaces (serial/net/other) using the exact same class, subclass and protocol values. This driver will only support the net/QMI function while there are other drivers supporting other device functions. The net/QMI interface number may also differ from device to device. It has been noted that all the other interfaces have additional functional descriptors, so we use that to detect the interface supported by this driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:06 +08:00
},
net: qmi_wwan: new devices: UML290 and K5006-Z Newer firmware versions for the Pantech UML290 use a different subclass ID. The Windows driver match on both IDs, so we do that as well. The ZTE (Vodafone) K5006-Z is a new device. Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15 11:42:57 +08:00
{ /* Pantech UML290 - newer firmware */
net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20 05:18:05 +08:00
USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff),
net: qmi_wwan: use a single bind function for all device types Refactoring the bind code lets us use a common driver_info struct for all supported devices, simplifying the code a bit. The real advantage is that devices using the CDC ECM interface layout now also can be added dynamically using the new_id sysfs interface. This simplifies testing of new devices. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 15:36:07 +08:00
.driver_info = (unsigned long)&qmi_wwan_info,
net: qmi_wwan: new devices: UML290 and K5006-Z Newer firmware versions for the Pantech UML290 use a different subclass ID. The Windows driver match on both IDs, so we do that as well. The ZTE (Vodafone) K5006-Z is a new device. Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15 11:42:57 +08:00
},
qmi_wwan/cdc_ether: move Novatel 551 and E362 to qmi_wwan These devices provide QMI and ethernet functionality via a standard CDC ethernet descriptor. But when driven by cdc_ether, the QMI functionality is unavailable because only cdc_ether can claim the USB interface. Thus blacklist the devices in cdc_ether and add their IDs to qmi_wwan, which enables both QMI and ethernet simultaneously. Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24 20:10:34 +08:00
{ /* Novatel USB551L and MC551 */
USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0xb001,
USB_CLASS_COMM,
USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&qmi_wwan_info,
},
{ /* Novatel E362 */
USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9010,
USB_CLASS_COMM,
USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&qmi_wwan_info,
},
qmi_wwan/cdc_ether: move Novatel E371 (1410:9011) to qmi_wwan This device provides QMI and ethernet functionality via a standard CDC ethernet descriptor. But when driven by cdc_ether, the QMI functionality is unavailable because only cdc_ether can claim the USB interface. Thus blacklist the device in cdc_ether and add its IDs to qmi_wwan, which enables both QMI and ethernet simultaneously. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-28 19:07:18 +08:00
{ /* Novatel Expedite E371 */
USB_DEVICE_AND_INTERFACE_INFO(0x1410, 0x9011,
USB_CLASS_COMM,
USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&qmi_wwan_info,
},
qmi_wwan/cdc_ether: add Dell Wireless 5800 (Novatel E362) USB IDs Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-17 16:17:41 +08:00
{ /* Dell Wireless 5800 (Novatel E362) */
USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8195,
USB_CLASS_COMM,
USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&qmi_wwan_info,
},
{ /* Dell Wireless 5800 V2 (Novatel E362) */
USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x8196,
USB_CLASS_COMM,
qmi_wwan, cdc-ether: add ADU960S It advertises a standard CDC-ETHER interface, which actually should be driven by qmi_wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-19 01:25:09 +08:00
USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&qmi_wwan_info,
},
qmi_wwan/cdc_ether: add device IDs for Dell 5804 (Novatel E371) WWAN card A rebranded Novatel E371 for AT&T's LTE bands. qmi_wwan should drive this device, while cdc_ether should ignore it. Even though the USB descriptors are plain CDC-ETHER that USB interface is a QMI interface. Cc: <stable@vger.kernel.org> Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-06 19:17:37 +08:00
{ /* Dell Wireless 5804 (Novatel E371) */
USB_DEVICE_AND_INTERFACE_INFO(0x413C, 0x819b,
USB_CLASS_COMM,
USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&qmi_wwan_info,
},
qmi_wwan, cdc-ether: add ADU960S It advertises a standard CDC-ETHER interface, which actually should be driven by qmi_wwan. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-19 01:25:09 +08:00
{ /* ADU960S */
USB_DEVICE_AND_INTERFACE_INFO(0x16d5, 0x650a,
USB_CLASS_COMM,
qmi_wwan/cdc_ether: add Dell Wireless 5800 (Novatel E362) USB IDs Signed-off-by: Dan Williams <dcbw@redhat.com> Cc: stable@vger.kernel.org Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-17 16:17:41 +08:00
USB_CDC_SUBCLASS_ETHERNET,
USB_CDC_PROTO_NONE),
.driver_info = (unsigned long)&qmi_wwan_info,
},
net: qmi_wwan: fix Gobi device probing Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by: Heinrich Siebmanns (Harvey) <H.Siebmanns@t-online.de> Cc: <stable@vger.kernel.org> # v3.4: 0000188 USB: qmi_wwan: Make forced int 4 whitelist generic Cc: <stable@vger.kernel.org> # v3.4: f7142e6 USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z Cc: <stable@vger.kernel.org> # v3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-21 10:45:58 +08:00
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
/* 3. Combined interface devices matching on interface number */
net: qmi_wwan: add Yota / Megafon M100-1 4g modem Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-02-12 10:42:50 +08:00
{QMI_FIXED_INTF(0x0408, 0xea42, 4)}, /* Yota / Megafon M100-1 */
net: qmi_wwan: add new Qualcomm devices Adding the device list from the Windows driver description files included with a new Qualcomm MDM9615 based device, "Alcatel-sbell ASB TL131 TDD LTE", from China Mobile. This device is tested and verified to work. The others are assumed to work based on using the same Windows driver. Many of these devices support multiple QMI/wwan ports, requiring multiple interface matching entries. All devices are composite, providing a mix of one or more serial, storage or Android Debug Brigde functions in addition to the wwan function. This device list included an update of one previously known device, which was incorrectly assumed to have a Gobi 2K layout. This is corrected. Reported-by: 王康 <scateu@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-10 21:06:20 +08:00
{QMI_FIXED_INTF(0x05c6, 0x7000, 0)},
{QMI_FIXED_INTF(0x05c6, 0x7001, 1)},
{QMI_FIXED_INTF(0x05c6, 0x7002, 1)},
{QMI_FIXED_INTF(0x05c6, 0x7101, 1)},
{QMI_FIXED_INTF(0x05c6, 0x7101, 2)},
{QMI_FIXED_INTF(0x05c6, 0x7101, 3)},
{QMI_FIXED_INTF(0x05c6, 0x7102, 1)},
{QMI_FIXED_INTF(0x05c6, 0x7102, 2)},
{QMI_FIXED_INTF(0x05c6, 0x7102, 3)},
{QMI_FIXED_INTF(0x05c6, 0x8000, 7)},
{QMI_FIXED_INTF(0x05c6, 0x8001, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9000, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9003, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9005, 2)},
{QMI_FIXED_INTF(0x05c6, 0x900a, 4)},
{QMI_FIXED_INTF(0x05c6, 0x900b, 2)},
{QMI_FIXED_INTF(0x05c6, 0x900c, 4)},
{QMI_FIXED_INTF(0x05c6, 0x900c, 5)},
{QMI_FIXED_INTF(0x05c6, 0x900c, 6)},
{QMI_FIXED_INTF(0x05c6, 0x900d, 5)},
{QMI_FIXED_INTF(0x05c6, 0x900f, 3)},
{QMI_FIXED_INTF(0x05c6, 0x900f, 4)},
{QMI_FIXED_INTF(0x05c6, 0x900f, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9010, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9010, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9011, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9011, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9021, 1)},
{QMI_FIXED_INTF(0x05c6, 0x9022, 2)},
{QMI_FIXED_INTF(0x05c6, 0x9025, 4)}, /* Alcatel-sbell ASB TL131 TDD LTE (China Mobile) */
{QMI_FIXED_INTF(0x05c6, 0x9026, 3)},
{QMI_FIXED_INTF(0x05c6, 0x902e, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9031, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9032, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9033, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9033, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9033, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9033, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9034, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9034, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9034, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9034, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9034, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9035, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9036, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9037, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9038, 4)},
{QMI_FIXED_INTF(0x05c6, 0x903b, 7)},
{QMI_FIXED_INTF(0x05c6, 0x903c, 6)},
{QMI_FIXED_INTF(0x05c6, 0x903d, 6)},
{QMI_FIXED_INTF(0x05c6, 0x903e, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9043, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9046, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9046, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9046, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9047, 2)},
{QMI_FIXED_INTF(0x05c6, 0x9047, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9047, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9048, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9048, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9048, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9048, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9048, 8)},
{QMI_FIXED_INTF(0x05c6, 0x904c, 5)},
{QMI_FIXED_INTF(0x05c6, 0x904c, 6)},
{QMI_FIXED_INTF(0x05c6, 0x904c, 7)},
{QMI_FIXED_INTF(0x05c6, 0x904c, 8)},
{QMI_FIXED_INTF(0x05c6, 0x9050, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9052, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9053, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9053, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9054, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9054, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9055, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9055, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9055, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9055, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9055, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9056, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9062, 2)},
{QMI_FIXED_INTF(0x05c6, 0x9062, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9062, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9062, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9062, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9062, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9062, 8)},
{QMI_FIXED_INTF(0x05c6, 0x9062, 9)},
{QMI_FIXED_INTF(0x05c6, 0x9064, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9065, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9065, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9066, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9066, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9067, 1)},
{QMI_FIXED_INTF(0x05c6, 0x9068, 2)},
{QMI_FIXED_INTF(0x05c6, 0x9068, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9068, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9068, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9068, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9068, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9069, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9069, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9069, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9069, 8)},
{QMI_FIXED_INTF(0x05c6, 0x9070, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9070, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9075, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9076, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9076, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9076, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9076, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9076, 8)},
{QMI_FIXED_INTF(0x05c6, 0x9077, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9077, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9077, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9077, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9078, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9079, 4)},
{QMI_FIXED_INTF(0x05c6, 0x9079, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9079, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9079, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9079, 8)},
{QMI_FIXED_INTF(0x05c6, 0x9080, 5)},
{QMI_FIXED_INTF(0x05c6, 0x9080, 6)},
{QMI_FIXED_INTF(0x05c6, 0x9080, 7)},
{QMI_FIXED_INTF(0x05c6, 0x9080, 8)},
{QMI_FIXED_INTF(0x05c6, 0x9083, 3)},
{QMI_FIXED_INTF(0x05c6, 0x9084, 4)},
{QMI_FIXED_INTF(0x05c6, 0x920d, 0)},
{QMI_FIXED_INTF(0x05c6, 0x920d, 5)},
net: qmi_wwan: add two Sierra Wireless/Netgear devices Add two device IDs found in an out-of-tree driver downloadable from Netgear. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 19:33:51 +08:00
{QMI_FIXED_INTF(0x0846, 0x68a2, 8)},
net: qmi_wwan: add Huawei E173 The Huawei E173 is a QMI/wwan device which normally appear as 12d1:1436 in Linux. The descriptors displayed in that mode will be picked up by cdc_ether. But the modem has another mode with a different device ID and a slightly different set of descriptors. This is the mode used by Windows like this: 3Modem: USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000 Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001 Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002 PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-25 14:03:59 +08:00
{QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */
qmi_wwan/cdc_ether: let qmi_wwan handle the Huawei E1820 Another QMI speaking Qualcomm based device, which should be driven by qmi_wwan, while cdc_ether should ignore it. Like on other Huawei devices, the wwan function can appear either as a single vendor specific interface or as a CDC ECM class function using separate control and data interfaces. The ECM control interface protocol is 0xff, likely in an attempt to indicate that vendor specific management is required. In addition to the near standard CDC class, Huawei also add vendor specific AT management commands to their firmwares. This is probably an attempt to support non-Windows systems using standard class drivers. Unfortunately, this part of the firmware is often buggy. Linux is much better off using whatever native vendor specific management protocol the device offers, and Windows uses, whenever possible. This means QMI in the case of Qualcomm based devices. The E1820 has been verified to work fine with QMI. Matching on interface number is necessary to distiguish the wwan function from serial functions in the single interface mode, as both function types will have class/subclass/function set to ff/ff/ff. The control interface number does not change in CDC ECM mode, so the interface number matching rule is sufficient to handle both modes. The cdc_ether blacklist entry is only relevant in CDC ECM mode, but using a similar interface number based rule helps document this as a transfer from one driver to another. Other Huawei 02/06/ff devices are left with the cdc_ether driver because we do not know whether they are based on Qualcomm chips. The Huawei specific AT command management is known to be somewhat hardware independent, and their usage of these class codes may also be independent of the modem hardware. Reported-by: Graham Inggs <graham.inggs@uct.ac.za> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-06 18:57:02 +08:00
{QMI_FIXED_INTF(0x12d1, 0x14ac, 1)}, /* Huawei E1820 */
net: qmi_wwan: add a number of CMOTech devices A number of older CMOTech modems are based on Qualcomm chips and exporting a QMI/wwan function. Reported-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26 01:00:33 +08:00
{QMI_FIXED_INTF(0x16d8, 0x6003, 0)}, /* CMOTech 6003 */
{QMI_FIXED_INTF(0x16d8, 0x6007, 0)}, /* CMOTech CHE-628S */
{QMI_FIXED_INTF(0x16d8, 0x6008, 0)}, /* CMOTech CMU-301 */
{QMI_FIXED_INTF(0x16d8, 0x6280, 0)}, /* CMOTech CHU-628 */
{QMI_FIXED_INTF(0x16d8, 0x7001, 0)}, /* CMOTech CHU-720S */
{QMI_FIXED_INTF(0x16d8, 0x7002, 0)}, /* CMOTech 7002 */
{QMI_FIXED_INTF(0x16d8, 0x7003, 4)}, /* CMOTech CHU-629K */
{QMI_FIXED_INTF(0x16d8, 0x7004, 3)}, /* CMOTech 7004 */
{QMI_FIXED_INTF(0x16d8, 0x7006, 5)}, /* CMOTech CGU-629 */
{QMI_FIXED_INTF(0x16d8, 0x700a, 4)}, /* CMOTech CHU-629S */
{QMI_FIXED_INTF(0x16d8, 0x7211, 0)}, /* CMOTech CHU-720I */
{QMI_FIXED_INTF(0x16d8, 0x7212, 0)}, /* CMOTech 7212 */
{QMI_FIXED_INTF(0x16d8, 0x7213, 0)}, /* CMOTech 7213 */
{QMI_FIXED_INTF(0x16d8, 0x7251, 1)}, /* CMOTech 7251 */
{QMI_FIXED_INTF(0x16d8, 0x7252, 1)}, /* CMOTech 7252 */
{QMI_FIXED_INTF(0x16d8, 0x7253, 1)}, /* CMOTech 7253 */
net: qmi_wwan: adding more ZTE devices Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 13:11:29 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0002, 1)},
{QMI_FIXED_INTF(0x19d2, 0x0012, 1)},
{QMI_FIXED_INTF(0x19d2, 0x0017, 3)},
qmi_wwan: add ONDA MT689DC device ID (fwd) Another QMI-speaking device by ZTE, re-branded by ONDA! I'm connected ovr this device's QMI interface right now, so I can say I tested it! :) Note: a follow-up patch was posted to the linux-usb mailing list, to prevent the option driver from binding to the device's QMI interface, making it unusable. Signed-off-by: Enrico Mioso <mrkiko.rs@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-29 21:39:19 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0019, 3)}, /* ONDA MT689DC */
net: qmi_wwan: adding more ZTE devices Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 13:11:29 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0021, 4)},
{QMI_FIXED_INTF(0x19d2, 0x0025, 1)},
{QMI_FIXED_INTF(0x19d2, 0x0031, 4)},
{QMI_FIXED_INTF(0x19d2, 0x0042, 4)},
{QMI_FIXED_INTF(0x19d2, 0x0049, 5)},
{QMI_FIXED_INTF(0x19d2, 0x0052, 4)},
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */
net: qmi_wwan: adding more ZTE devices Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 13:11:29 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0058, 4)},
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */
{QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */
net: qmi_wwan: adding more ZTE devices Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 13:11:29 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0113, 5)},
{QMI_FIXED_INTF(0x19d2, 0x0118, 5)},
{QMI_FIXED_INTF(0x19d2, 0x0121, 5)},
{QMI_FIXED_INTF(0x19d2, 0x0123, 4)},
{QMI_FIXED_INTF(0x19d2, 0x0124, 5)},
{QMI_FIXED_INTF(0x19d2, 0x0125, 6)},
{QMI_FIXED_INTF(0x19d2, 0x0126, 5)},
{QMI_FIXED_INTF(0x19d2, 0x0130, 1)},
{QMI_FIXED_INTF(0x19d2, 0x0133, 3)},
{QMI_FIXED_INTF(0x19d2, 0x0141, 5)},
net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) <fangxiaozhi@huawei.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Cc: Dan Williams <dcbw@redhat.com> Cc: Shawn J. Goff <shawn7400@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-20 05:18:05 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0157, 5)}, /* ZTE MF683 */
net: qmi_wwan: adding more ZTE devices Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 13:11:29 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0158, 3)},
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */
net: qmi_wwan: adding more ZTE devices Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 13:11:29 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0168, 4)},
{QMI_FIXED_INTF(0x19d2, 0x0176, 3)},
{QMI_FIXED_INTF(0x19d2, 0x0178, 3)},
{QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */
{QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */
{QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
{QMI_FIXED_INTF(0x19d2, 0x0257, 3)}, /* ZTE MF821 */
net: qmi_wwan: add ONDA MT8205 4G LTE The driver description files gives these names to the vendor specific functions on this modem: Diag VID_19D2&PID_0265&MI_00 NMEA VID_19D2&PID_0265&MI_01 AT cmd VID_19D2&PID_0265&MI_02 Modem VID_19D2&PID_0265&MI_03 Net VID_19D2&PID_0265&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-18 12:26:34 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0265, 4)}, /* ONDA MT8205 4G LTE */
net: qmi_wwan: add ZTE MF880 The driver description files gives these names to the vendor specific functions on this modem: diag: VID_19D2&PID_0284&MI_00 nmea: VID_19D2&PID_0284&MI_01 at: VID_19D2&PID_0284&MI_02 mdm: VID_19D2&PID_0284&MI_03 net: VID_19D2&PID_0284&MI_04 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-19 12:15:51 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0284, 4)}, /* ZTE MF880 */
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */
net: qmi_wwan: Add Telewell TW-LTE 4G Information from driver description files: diag: VID_19D2&PID_0412&MI_00 nmea: VID_19D2&PID_0412&MI_01 at: VID_19D2&PID_0412&MI_02 modem: VID_19D2&PID_0412&MI_03 net: VID_19D2&PID_0412&MI_04 Signed-off-by: Teppo Kotilainen <qubit303@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-03 07:05:13 +08:00
{QMI_FIXED_INTF(0x19d2, 0x0412, 4)}, /* Telewell TW-LTE 4G */
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
{QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */
{QMI_FIXED_INTF(0x19d2, 0x1010, 4)}, /* ZTE (Vodafone) K3571-Z */
net: qmi_wwan: adding more ZTE devices Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 13:11:29 +08:00
{QMI_FIXED_INTF(0x19d2, 0x1012, 4)},
net: qmi_wwan: new devices: UML290 and K5006-Z Newer firmware versions for the Pantech UML290 use a different subclass ID. The Windows driver match on both IDs, so we do that as well. The ZTE (Vodafone) K5006-Z is a new device. Cc: Dan Williams <dcbw@redhat.com> Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-15 11:42:57 +08:00
{QMI_FIXED_INTF(0x19d2, 0x1018, 3)}, /* ZTE (Vodafone) K5006-Z */
net: qmi_wwan: adding more ZTE devices Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 13:11:29 +08:00
{QMI_FIXED_INTF(0x19d2, 0x1021, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1245, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1247, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1252, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1254, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1255, 3)},
{QMI_FIXED_INTF(0x19d2, 0x1255, 4)},
{QMI_FIXED_INTF(0x19d2, 0x1256, 4)},
net: qmi_wwan: add ZTE MF667 The driver description files give these descriptions to the vendor specific ports on this modem: VID_19D2&PID_1270&MI_00: "ZTE MF667 Diagnostics Port" VID_19D2&PID_1270&MI_01: "ZTE MF667 AT Port" VID_19D2&PID_1270&MI_02: "ZTE MF667 ATExt2 Port" VID_19D2&PID_1270&MI_03: "ZTE MF667 ATExt Port" VID_19D2&PID_1270&MI_04: "ZTE MF667 USB Modem" VID_19D2&PID_1270&MI_05: "ZTE MF667 Network Adapter" Signed-off-by: Raymond Wanyoike <raymond.wanyoike@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-09 05:01:02 +08:00
{QMI_FIXED_INTF(0x19d2, 0x1270, 5)}, /* ZTE MF667 */
net: qmi_wwan: adding more ZTE devices Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 13:11:29 +08:00
{QMI_FIXED_INTF(0x19d2, 0x1401, 2)},
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
{QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */
net: qmi_wwan: adding more ZTE devices Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18 13:11:29 +08:00
{QMI_FIXED_INTF(0x19d2, 0x1424, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1425, 2)},
{QMI_FIXED_INTF(0x19d2, 0x1426, 2)}, /* ZTE MF91 */
net: qmi_wwan: Add ID for Telewell TW-LTE 4G v2 There's a new version of the Telewell 4G modem working with, but not recognized by this driver. Signed-off-by: Bernd Wachter <bernd.wachter@jolla.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-02 03:01:09 +08:00
{QMI_FIXED_INTF(0x19d2, 0x1428, 2)}, /* Telewell TW-LTE 4G v2 */
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
{QMI_FIXED_INTF(0x19d2, 0x2002, 4)}, /* ZTE (Vodafone) K3765-Z */
net: qmi_wwan: add Sierra Wireless devices Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:31 +08:00
{QMI_FIXED_INTF(0x0f3d, 0x68a2, 8)}, /* Sierra Wireless MC7700 */
{QMI_FIXED_INTF(0x114f, 0x68a2, 8)}, /* Sierra Wireless MC7750 */
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
{QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */
{QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */
net: qmi_wwan: add Sierra Wireless MC73xx Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26 01:00:29 +08:00
{QMI_FIXED_INTF(0x1199, 0x68c0, 8)}, /* Sierra Wireless MC73xx */
{QMI_FIXED_INTF(0x1199, 0x68c0, 10)}, /* Sierra Wireless MC73xx */
net: qmi_wwan: add Sierra Wireless devices Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:31 +08:00
{QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */
net: qmi_wwan: add Sierra Wireless EM7355 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26 01:00:28 +08:00
{QMI_FIXED_INTF(0x1199, 0x901f, 8)}, /* Sierra Wireless EM7355 */
net: qmi_wwan: add Sierra Wireless MC7305/MC7355 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26 01:00:30 +08:00
{QMI_FIXED_INTF(0x1199, 0x9041, 8)}, /* Sierra Wireless MC7305/MC7355 */
net: qmi_wwan: add Netgear Aircard 340U This device was mentioned in an OpenWRT forum. Seems to have a "standard" Sierra Wireless ifnumber to function layout: 0: qcdm 2: nmea 3: modem 8: qmi 9: storage Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-04 20:04:33 +08:00
{QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */
net: qmi_wwan: add additional Sierra Wireless QMI devices A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 19:44:45 +08:00
{QMI_FIXED_INTF(0x1199, 0x9053, 8)}, /* Sierra Wireless Modem */
{QMI_FIXED_INTF(0x1199, 0x9054, 8)}, /* Sierra Wireless Modem */
net: qmi_wwan: add Netgear AirCard 341U Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 03:05:03 +08:00
{QMI_FIXED_INTF(0x1199, 0x9055, 8)}, /* Netgear AirCard 341U */
net: qmi_wwan: add additional Sierra Wireless QMI devices A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 19:44:45 +08:00
{QMI_FIXED_INTF(0x1199, 0x9056, 8)}, /* Sierra Wireless Modem */
net: qmi_wwan: add two Sierra Wireless/Netgear devices Add two device IDs found in an out-of-tree driver downloadable from Netgear. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17 19:33:51 +08:00
{QMI_FIXED_INTF(0x1199, 0x9057, 8)},
net: qmi_wwan: add additional Sierra Wireless QMI devices A set of new VID/PIDs retrieved from the out-of-tree GobiNet/GobiSerial Sierra Wireless drivers. Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-29 19:44:45 +08:00
{QMI_FIXED_INTF(0x1199, 0x9061, 8)}, /* Sierra Wireless Modem */
net: qmi_wwan: add Telekom Speedstick LTE II also known as Alcatel One Touch L100V LTE The driver description files gives these names to the vendor specific functions on this modem: Application1: VID_1BBB&PID_011E&MI_00 Application2: VID_1BBB&PID_011E&MI_01 Modem: VID_1BBB&PID_011E&MI_03 Ethernet: VID_1BBB&PID_011E&MI_04 Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-28 14:30:55 +08:00
{QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */
net: qmi_wwan: add Alcatel L800MA Device interface layout: 0: ff/ff/ff - serial 1: ff/00/00 - serial AT+PPP 2: ff/ff/ff - QMI/wwan 3: 08/06/50 - storage Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26 01:00:32 +08:00
{QMI_FIXED_INTF(0x1bbb, 0x0203, 2)}, /* Alcatel L800MA */
net: qmi_wwan: add TP-LINK HSUPA Modem MA180 The driver description files gives these names to the vendor specific functions on this modem: Diagnostics VID_2357&PID_0201&MI_00 NMEA VID_2357&PID_0201&MI_01 Modem VID_2357&PID_0201&MI_03 Networkcard VID_2357&PID_0201&MI_04 The "Networkcard" function has been verified to support these QMI services: ctl (1.3) wds (1.3) dms (1.2) nas (1.0) Reported-by: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-15 07:19:50 +08:00
{QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */
net: qmi_wwan: add TP-LINK MA260 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28 23:17:51 +08:00
{QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */
NET: qmi_wwan: add Telit LE920 support Add VID, PID and fixed interface for Telit LE920 Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-30 10:47:06 +08:00
{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
net: qmi_wwan: add Telit LE920 newer firmware support Newer firmware use a new pid and a different interface. Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:25 +08:00
{QMI_FIXED_INTF(0x1bc7, 0x1201, 2)}, /* Telit LE920 */
net: qmi_wwan: add Olivetti Olicard modems Lars writes: "I'm only 99% sure that the net interfaces are qmi interfaces, nothing to lose by adding them in my opinion." And I tend to agree based on the similarity with the two Olicard modems we already have here. Reported-by: Lars Melin <larsm17@gmail.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-06 23:27:59 +08:00
{QMI_FIXED_INTF(0x0b3c, 0xc000, 4)}, /* Olivetti Olicard 100 */
{QMI_FIXED_INTF(0x0b3c, 0xc001, 4)}, /* Olivetti Olicard 120 */
{QMI_FIXED_INTF(0x0b3c, 0xc002, 4)}, /* Olivetti Olicard 140 */
{QMI_FIXED_INTF(0x0b3c, 0xc004, 6)}, /* Olivetti Olicard 155 */
{QMI_FIXED_INTF(0x0b3c, 0xc005, 6)}, /* Olivetti Olicard 200 */
{QMI_FIXED_INTF(0x0b3c, 0xc00a, 6)}, /* Olivetti Olicard 160 */
net: qmi_wwan: add Olivetti Olicard 500 Device interface layout: 0: ff/ff/ff - serial 1: ff/ff/ff - serial AT+PPP 2: 08/06/50 - storage 3: ff/ff/ff - serial 4: ff/ff/ff - QMI/wwan Reported-by: Julio Araujo <julio.araujo@wllctel.com.br> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26 01:00:31 +08:00
{QMI_FIXED_INTF(0x0b3c, 0xc00b, 4)}, /* Olivetti Olicard 500 */
net: qmi_wwan: fix Cinterion PLXX product ID Cinterion PLXX LTE devices have a 0x0060 product ID, not 0x12d1. The blacklisting in the serial/option driver does actually use the correct PID, as per commit 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db ('USB: Blacklisted Cinterion's PLxx WWAN Interface'). CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> Signed-off-by: Aleksander Morgado <aleksander@lanedo.com> Acked-by: Bjørn Mork <bjorn@mork.no> Acked-by: Christian Schmiedl <christian.schmiedl@gemalto.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 23:02:36 +08:00
{QMI_FIXED_INTF(0x1e2d, 0x0060, 4)}, /* Cinterion PLxx */
net: qmi_wwan: add support for Cinterion PXS8 and PHS8 When the PXS8 and PHS8 devices show up with PID 0x0053 they will expose both a QMI port and a WWAN interface. CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> CC: David McCullough <david.mccullough@accelecon.com> Signed-off-by: Aleksander Morgado <aleksander@aleksander.es> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12 22:55:14 +08:00
{QMI_FIXED_INTF(0x1e2d, 0x0053, 4)}, /* Cinterion PHxx,PXxx */
net: qmi_wwan: add a number of Dell devices Dan writes: "The Dell drivers use the same configuration for PIDs: 81A2: Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card 81A3: Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card 81A4: Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card 81A8: Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card 81A9: Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card These devices are all clearly Sierra devices, but are also definitely Gobi-based. The A8 might be the MC7700/7710 and A9 is likely a MC7750. >From DellGobi5kSetup.exe from the Dell drivers: usbif0: serial/firmware loader? usbif2: nmea usbif3: modem/ppp usbif8: net/QMI" Reported-by: AceLan Kao <acelan.kao@canonical.com> Reported-by: Dan Williams <dcbw@redhat.com> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-26 01:00:34 +08:00
{QMI_FIXED_INTF(0x413c, 0x81a2, 8)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
{QMI_FIXED_INTF(0x413c, 0x81a3, 8)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
{QMI_FIXED_INTF(0x413c, 0x81a4, 8)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
{QMI_FIXED_INTF(0x413c, 0x81a8, 8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
{QMI_FIXED_INTF(0x413c, 0x81a9, 8)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
qmi_wwan: Add support for HP lt4112 LTE/HSPA+ Gobi 4G Modem Added the USB VID/PID for the HP lt4112 LTE/HSPA+ Gobi 4G Modem (Huawei me906e) Signed-off-by: Martin Hauke <mardnh@gmx.de> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-17 02:55:25 +08:00
{QMI_FIXED_INTF(0x03f0, 0x581d, 4)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
/* 4. Gobi 1000 devices */
net: qmi_wwan: fix Gobi device probing Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by: Heinrich Siebmanns (Harvey) <H.Siebmanns@t-online.de> Cc: <stable@vger.kernel.org> # v3.4: 0000188 USB: qmi_wwan: Make forced int 4 whitelist generic Cc: <stable@vger.kernel.org> # v3.4: f7142e6 USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z Cc: <stable@vger.kernel.org> # v3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-21 10:45:58 +08:00
{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
{QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
qmi_wwan: add various Novatel Gobi1K IDs Found in the Windows INF files while investigating the Novatel/Verizon USB-1000 device. The USB-1000 is verified as a Gobi1K device and works with QMI after loading appropriate firmware. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-21 05:10:59 +08:00
{QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel/Verizon USB-1000 */
{QMI_GOBI1K_DEVICE(0x1410, 0xa002)}, /* Novatel Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x1410, 0xa003)}, /* Novatel Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x1410, 0xa004)}, /* Novatel Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x1410, 0xa005)}, /* Novatel Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x1410, 0xa006)}, /* Novatel Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x1410, 0xa007)}, /* Novatel Gobi Modem device */
net: qmi_wwan: fix Gobi device probing Ignoring interfaces with additional descriptors is not a reliable method for locating the correct interface on Gobi devices. There is at least one device where this method fails: https://bbs.archlinux.org/viewtopic.php?id=143506 The result is that the AT command port (interface #2) is hidden from qcserial, preventing traditional serial modem usage: [ 15.562552] qmi_wwan 4-1.6:1.0: cdc-wdm0: USB WDM device [ 15.562691] qmi_wwan 4-1.6:1.0: wwan0: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.563383] qmi_wwan: probe of 4-1.6:1.1 failed with error -22 [ 15.564189] qmi_wwan 4-1.6:1.2: cdc-wdm1: USB WDM device [ 15.564302] qmi_wwan 4-1.6:1.2: wwan1: register 'qmi_wwan' at usb-0000:00:1d.0-1.6, Qualcomm Gobi wwan/QMI device, 1e:df:3c:3a:4e:3b [ 15.564328] qmi_wwan: probe of 4-1.6:1.3 failed with error -22 [ 15.569376] qcserial 4-1.6:1.1: Qualcomm USB modem converter detected [ 15.569440] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB0 [ 15.570372] qcserial 4-1.6:1.3: Qualcomm USB modem converter detected [ 15.570430] usb 4-1.6: Qualcomm USB modem converter now attached to ttyUSB1 Use static interface numbers taken from the interface map in qcserial for all Gobi devices instead: Gobi 1K USB layout: 0: serial port (doesn't respond) 1: serial port (doesn't respond) 2: AT-capable modem port 3: QMI/net Gobi 2K+ USB layout: 0: QMI/net 1: DM/DIAG (use libqcdm from ModemManager for communication) 2: AT-capable modem port 3: NMEA This should be more reliable over all, and will also prevent the noisy "probe failed" messages. The whitelisting logic is expected to be replaced by direct interface number matching in 3.6. Reported-by: Heinrich Siebmanns (Harvey) <H.Siebmanns@t-online.de> Cc: <stable@vger.kernel.org> # v3.4: 0000188 USB: qmi_wwan: Make forced int 4 whitelist generic Cc: <stable@vger.kernel.org> # v3.4: f7142e6 USB: qmi_wwan: Add ZTE (Vodafone) K3520-Z Cc: <stable@vger.kernel.org> # v3.4 Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-21 10:45:58 +08:00
{QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
net: qmi_wwan: use fixed interface number matching This driver support many composite USB devices where the interface class/subclass/protocol provides no information about the interface function. Interfaces with different functions may all use ff/ff/ff, like this example of a device with three serial interfaces and three QMI/wwan interfaces: T: Bus=02 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#=116 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1199 ProdID=68a2 Rev= 0.06 S: Manufacturer=Sierra Wireless, Incorporated S: Product=MC7710 S: SerialNumber=3581780xxxxxx C:* #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qcserial E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=19 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=20 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Instead of class/subclass/protocol the vendor use fixed interface numbers for each function, and the Windows drivers use these numbers to match driver and function. The driver has had its own interface number whitelisting code to simulate this functionality. Replace this with generic interface number matching now that the USB subsystem support is there. This - removes the need for a driver_info structure per interface number, - avoids running the probe function for unsupported interfaces, and - simplifies the code. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:30 +08:00
/* 5. Gobi 2000 and 3000 devices */
net: qmi_wwan: add Gobi and Pantech UML290 device IDs Adding the Pantech UML290 and all non-QDL Gobi device IDs from the qcserial driver now that we have support for shared net/QMI USB interfaces. Most of these are not yet tested with this driver, but should be mostly identical to tested devices, except for device IDs. Gobi devices provide several different interfaces (serial/net/other) using the exact same class, subclass and protocol values. This driver will only support the net/QMI function while there are other drivers supporting other device functions. The net/QMI interface number may also differ from device to device. It has been noted that all the other interfaces have additional functional descriptors, so we use that to detect the interface supported by this driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:06 +08:00
{QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
net: qmi_wwan: add several new Gobi devices Gobi devices are composite, needing both the qcserial and qmi_wwan drivers to support all functions. Re-syncing the list of supported devices with qcserial. Cc: Aleksander Morgado <aleksander@lanedo.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@tempietto.lan>
2012-09-01 11:47:26 +08:00
{QMI_GOBI_DEVICE(0x413c, 0x8194)}, /* Dell Gobi 3000 Composite */
net: qmi_wwan: add Gobi and Pantech UML290 device IDs Adding the Pantech UML290 and all non-QDL Gobi device IDs from the qcserial driver now that we have support for shared net/QMI USB interfaces. Most of these are not yet tested with this driver, but should be mostly identical to tested devices, except for device IDs. Gobi devices provide several different interfaces (serial/net/other) using the exact same class, subclass and protocol values. This driver will only support the net/QMI function while there are other drivers supporting other device functions. The net/QMI interface number may also differ from device to device. It has been noted that all the other interfaces have additional functional descriptors, so we use that to detect the interface supported by this driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:06 +08:00
{QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
{QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
{QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */
{QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */
{QMI_GOBI_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */
{QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */
{QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */
{QMI_GOBI_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */
net: qmi_wwan: add Option GTM681W A standard Gobi 3000 reference design module. Reported-by: Richard Weinberger <richard@nod.at> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-28 23:17:50 +08:00
{QMI_GOBI_DEVICE(0x0af0, 0x8120)}, /* Option GTM681W */
net: qmi_wwan: add Sierra Wireless devices Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:31 +08:00
{QMI_GOBI_DEVICE(0x1199, 0x68a5)}, /* Sierra Wireless Modem */
{QMI_GOBI_DEVICE(0x1199, 0x68a9)}, /* Sierra Wireless Modem */
net: qmi_wwan: add Gobi and Pantech UML290 device IDs Adding the Pantech UML290 and all non-QDL Gobi device IDs from the qcserial driver now that we have support for shared net/QMI USB interfaces. Most of these are not yet tested with this driver, but should be mostly identical to tested devices, except for device IDs. Gobi devices provide several different interfaces (serial/net/other) using the exact same class, subclass and protocol values. This driver will only support the net/QMI function while there are other drivers supporting other device functions. The net/QMI interface number may also differ from device to device. It has been noted that all the other interfaces have additional functional descriptors, so we use that to detect the interface supported by this driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:06 +08:00
{QMI_GOBI_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9004)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9005)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9006)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9007)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9008)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
{QMI_GOBI_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
{QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
{QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
net: qmi_wwan: fix Gobi device probing for un2430 HP un2430 is a Gobi 3000 device. It was mistakenly treated as Gobi 1000 in patch b9f90eb2740203ff2592efe640409ad48335d1c2. I own this device and qmi_wwan works again with this fix. Signed-off-by: Pierre Sauter <pierre.sauter@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 15:02:59 +08:00
{QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
net: qmi_wwan: Add Sierra Wireless device IDs Some additional Gobi3K IDs found in the BSD/GPL licensed out-of-tree GobiNet driver from Sierra Wireless. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-24 07:19:32 +08:00
{QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
{QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
net: qmi_wwan: add Sierra Wireless devices Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:31 +08:00
{QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */
net: qmi_wwan: add several new Gobi devices Gobi devices are composite, needing both the qcserial and qmi_wwan drivers to support all functions. Re-syncing the list of supported devices with qcserial. Cc: Aleksander Morgado <aleksander@lanedo.com> Cc: Thomas Tuttle <ttuttle@chromium.org> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@tempietto.lan>
2012-09-01 11:47:26 +08:00
{QMI_GOBI_DEVICE(0x12d1, 0x14f1)}, /* Sony Gobi 3000 Composite */
net: qmi_wwan: new device: Foxconn/Novatel E396 Foxconn-branded Novatel E396, Gobi3k modem. Cc: Dan Williams <dcbw@redhat.com> Cc: Bjørn Mork <bjorn@mork.no> Cc: Ben Chan <benchan@google.com> Signed-off-by: Aleksander Morgado <aleksander@lanedo.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-28 10:30:32 +08:00
{QMI_GOBI_DEVICE(0x1410, 0xa021)}, /* Foxconn Gobi 3000 Modem device (Novatel E396) */
net: qmi_wwan: add Sierra Wireless devices Add 6 new devices and one modified device, based on information from laptop vendor Windows drivers. Sony provides a driver with two new devices using a Gobi 2k+ layout (1199:68a5 and 1199:68a9). The Sony driver also adds a non-standard QMI/net interface to the already supported 1199:9011 Gobi device. We do not know whether this is an alternate interface number or an additional interface which might be present, but that doesn't really matter. Lenovo provides a driver supporting 4 new devices: - MC7770 (1199:901b) with standard Gobi 2k+ layout - MC7700 (0f3d:68a2) with layout similar to MC7710 - MC7750 (114f:68a2) with layout similar to MC7710 - EM7700 (1199:901c) with layout similar to MC7710 Note regaring the three devices similar to MC7710: The Windows drivers only support interface #8 on these devices. The MC7710 can support QMI/net functions on interface #19 and #20 as well, and this driver is verified to work on interface #19 (a firmware bug is suspected to prevent #20 from working). We do not enable these additional interfaces until they either show up in a Windows driver or are verified to work in some other way. Therefore limiting the new devices to interface #8 for now. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12 17:16:31 +08:00
net: qmi_wwan: add Gobi and Pantech UML290 device IDs Adding the Pantech UML290 and all non-QDL Gobi device IDs from the qcserial driver now that we have support for shared net/QMI USB interfaces. Most of these are not yet tested with this driver, but should be mostly identical to tested devices, except for device IDs. Gobi devices provide several different interfaces (serial/net/other) using the exact same class, subclass and protocol values. This driver will only support the net/QMI function while there are other drivers supporting other device functions. The net/QMI interface number may also differ from device to device. It has been noted that all the other interfaces have additional functional descriptors, so we use that to detect the interface supported by this driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:06 +08:00
{ } /* END */
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
};
MODULE_DEVICE_TABLE(usb, products);
net: qmi_wwan: fix checkpatch warnings Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-25 17:21:26 +08:00
static int qmi_wwan_probe(struct usb_interface *intf,
const struct usb_device_id *prod)
net: qmi_wwan: make dynamic device IDs work The usbnet API use the device ID table to store a pointer to a minidriver. Setting a generic pointer for dynamic device IDs will in most cases make them work as expected. usbnet will otherwise treat the dynamic IDs as blacklisted. That is rarely useful. There is no standard class describing devices supported by this driver, and most vendors don't even provide enough information to allow vendor specific wildcard matching. The result is that most of the supported devices must be explicitly listed in the device table. Allowing dynamic IDs to work both simplifies testing and verification of new devices, and provides a way for end users to use a device before the ID is added to the driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 19:14:32 +08:00
{
struct usb_device_id *id = (struct usb_device_id *)prod;
/* Workaround to enable dynamic IDs. This disables usbnet
* blacklisting functionality. Which, if required, can be
* reimplemented here by using a magic "blacklist" value
* instead of 0 in the static device id table
*/
if (!id->driver_info) {
dev_dbg(&intf->dev, "setting defaults for dynamic device id\n");
net: qmi_wwan: use a single bind function for all device types Refactoring the bind code lets us use a common driver_info struct for all supported devices, simplifying the code a bit. The real advantage is that devices using the CDC ECM interface layout now also can be added dynamically using the new_id sysfs interface. This simplifies testing of new devices. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07 15:36:07 +08:00
id->driver_info = (unsigned long)&qmi_wwan_info;
net: qmi_wwan: make dynamic device IDs work The usbnet API use the device ID table to store a pointer to a minidriver. Setting a generic pointer for dynamic device IDs will in most cases make them work as expected. usbnet will otherwise treat the dynamic IDs as blacklisted. That is rarely useful. There is no standard class describing devices supported by this driver, and most vendors don't even provide enough information to allow vendor specific wildcard matching. The result is that most of the supported devices must be explicitly listed in the device table. Allowing dynamic IDs to work both simplifies testing and verification of new devices, and provides a way for end users to use a device before the ID is added to the driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 19:14:32 +08:00
}
return usbnet_probe(intf, id);
}
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
static struct usb_driver qmi_wwan_driver = {
.name = "qmi_wwan",
.id_table = products,
net: qmi_wwan: make dynamic device IDs work The usbnet API use the device ID table to store a pointer to a minidriver. Setting a generic pointer for dynamic device IDs will in most cases make them work as expected. usbnet will otherwise treat the dynamic IDs as blacklisted. That is rarely useful. There is no standard class describing devices supported by this driver, and most vendors don't even provide enough information to allow vendor specific wildcard matching. The result is that most of the supported devices must be explicitly listed in the device table. Allowing dynamic IDs to work both simplifies testing and verification of new devices, and provides a way for end users to use a device before the ID is added to the driver. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17 19:14:32 +08:00
.probe = qmi_wwan_probe,
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
.disconnect = usbnet_disconnect,
net: qmi_wwan: support devices having a shared QMI/wwan interface Use the new cdc-wdm subdriver interface to create a device management device even for USB devices having a single combined QMI/wwan USB interface with three endpoints (int, bulk in, bulk out) instead of separate data and control interfaces. Some Huawei devices can be switched to a single interface mode for use with other operating systems than Linux. This adds support for these devices when they run in such non-Linux modes. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-03-09 19:35:05 +08:00
.suspend = qmi_wwan_suspend,
.resume = qmi_wwan_resume,
.reset_resume = qmi_wwan_resume,
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
.supports_autosuspend = 1,
USB: Disable hub-initiated LPM for comms devices. Hub-initiated LPM is not good for USB communications devices. Comms devices should be able to tell when their link can go into a lower power state, because they know when an incoming transmission is finished. Ideally, these devices would slam their links into a lower power state, using the device-initiated LPM, after finishing the last packet of their data transfer. If we enable the idle timeouts for the parent hubs to enable hub-initiated LPM, we will get a lot of useless LPM packets on the bus as the devices reject LPM transitions when they're in the middle of receiving data. Worse, some devices might blindly accept the hub-initiated LPM and power down their radios while they're in the middle of receiving a transmission. The Intel Windows folks are disabling hub-initiated LPM for all USB communications devices under a xHCI USB 3.0 host. In order to keep the Linux behavior as close as possible to Windows, we need to do the same in Linux. Set the disable_hub_initiated_lpm flag for for all USB communications drivers. I know there aren't currently any USB 3.0 devices that implement these class specifications, but we should be ready if they do. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Hansjoerg Lipp <hjlipp@web.de> Cc: Tilman Schmidt <tilman@imap.cc> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Peter Korsgaard <jacmet@sunsite.dk> Cc: Jan Dumon <j.dumon@option.com> Cc: Petko Manolov <petkan@users.sourceforge.net> Cc: Steve Glendinning <steve.glendinning@smsc.com> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: Christian Lamparter <chunkeey@googlemail.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: "Franky (Zhenhui) Lin" <frankyl@broadcom.com> Cc: Kan Yan <kanyan@broadcom.com> Cc: Dan Williams <dcbw@redhat.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: Ivo van Doorn <IvDoorn@gmail.com> Cc: Gertjan van Wingerde <gwingerde@gmail.com> Cc: Helmut Schaa <helmut.schaa@googlemail.com> Cc: Herton Ronaldo Krzesinski <herton@canonical.com> Cc: Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Cc: Daniel Drake <dsd@gentoo.org> Cc: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2012-04-24 01:08:51 +08:00
.disable_hub_initiated_lpm = 1,
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
};
net: qmi_wwan: use module_usb_driver macro Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19 08:42:03 +08:00
module_usb_driver(qmi_wwan_driver);
net: usb: qmi_wwan: New driver for Huawei QMI based WWAN devices Some WWAN LTE/3G devices based on chipsets from Qualcomm provide near standard CDC ECM interfaces in addition to the usual serial interfaces. The Huawei E392/E398 are examples of such devices. These typically cannot be fully configured using AT commands over a serial interface. It is necessary to speak the proprietary Qualcomm MSM Interface (QMI) protocol to the device to enable the ethernet proxy functionality. The devices embed the QMI protocol in CDC on the control interface, using standard CDC commands and notifications. The do not otherwise use CDC commands for the ethernet function. This driver does therefore not need access to any other aspects of the control interface than the descriptors attached to it. Another driver, cdc-wdm, will provide userspace access to the QMI protocol independently of this driver. To facilitate this, this driver avoids binding to the control interface, and uses only the associated data interface after parsing the common CDC functional descriptors on the control interface. You will want both the cdc-wdm and option drivers as companions to this driver, to have full access to all interfaces and protocols exported by the device. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-01-19 23:37:22 +08:00
MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver");
MODULE_LICENSE("GPL");