UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/clk/at91/clk-sam9x60-pll.c

532 lines
14 KiB
C
Raw Normal View History

clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2019 Microchip Technology Inc.
*
*/
#include <linux/bitfield.h>
#include <linux/clk-provider.h>
#include <linux/clkdev.h>
#include <linux/clk/at91_pmc.h>
#include <linux/of.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include "pmc.h"
clk: at91: move sam9x60's PLL register offsets to PMC header Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-01-20 20:10:06 +08:00
#define PMC_PLL_CTRL0_DIV_MSK GENMASK(7, 0)
clk: at91: clk-sam9x60-pll: fix mul mask According to datasheet mul mask is on bits 31..24. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1595403506-8209-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:11 +08:00
#define PMC_PLL_CTRL1_MUL_MSK GENMASK(31, 24)
clk: at91: sam9x60-pll: use frac when setting frequency In commit a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") the fractional part of PLL wasn't set on registers but it was calculated and taken into account for determining div and mul (see sam9x60_pll_get_best_div_mul()). Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:14 +08:00
#define PMC_PLL_CTRL1_FRACR_MSK GENMASK(21, 0)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
#define PLL_DIV_MAX (FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, UINT_MAX) + 1)
#define UPLL_DIV 2
#define PLL_MUL_MAX (FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, UINT_MAX) + 1)
clk: at91: sam9x60-pll: check fcore against ranges According to datasheet the range of 600-1200MHz is for the frequency generated by the fractional part of the PLL (namely Fcorepllck according to datasheet). With this in mind the output range of the PLL itself (fractional + div), taking into account that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:13 +08:00
#define FCORE_MIN (600000000)
#define FCORE_MAX (1200000000)
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
#define PLL_MAX_ID 7
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
struct sam9x60_pll_core {
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
struct regmap *regmap;
spinlock_t *lock;
const struct clk_pll_characteristics *characteristics;
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
const struct clk_pll_layout *layout;
struct clk_hw hw;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
u8 id;
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
};
struct sam9x60_frac {
struct sam9x60_pll_core core;
u32 frac;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
u16 mul;
};
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
struct sam9x60_div {
struct sam9x60_pll_core core;
u8 div;
};
#define to_sam9x60_pll_core(hw) container_of(hw, struct sam9x60_pll_core, hw)
#define to_sam9x60_frac(core) container_of(core, struct sam9x60_frac, core)
#define to_sam9x60_div(core) container_of(core, struct sam9x60_div, core)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
static inline bool sam9x60_pll_ready(struct regmap *regmap, int id)
{
unsigned int status;
clk: at91: move sam9x60's PLL register offsets to PMC header Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-01-20 20:10:06 +08:00
regmap_read(regmap, AT91_PMC_PLL_ISR0, &status);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
return !!(status & BIT(id));
}
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static bool sam9x60_frac_pll_ready(struct regmap *regmap, u8 id)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
{
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
return sam9x60_pll_ready(regmap, id);
}
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static unsigned long sam9x60_frac_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
struct sam9x60_frac *frac = to_sam9x60_frac(core);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
return (parent_rate * (frac->mul + 1) +
((u64)parent_rate * frac->frac >> 22));
}
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static int sam9x60_frac_pll_prepare(struct clk_hw *hw)
{
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
struct sam9x60_frac *frac = to_sam9x60_frac(core);
struct regmap *regmap = core->regmap;
unsigned int val, cfrac, cmul;
unsigned long flags;
spin_lock_irqsave(core->lock, flags);
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_ID_MSK, core->id);
clk: at91: move sam9x60's PLL register offsets to PMC header Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-01-20 20:10:06 +08:00
regmap_read(regmap, AT91_PMC_PLL_CTRL1, &val);
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
cmul = (val & core->layout->mul_mask) >> core->layout->mul_shift;
cfrac = (val & core->layout->frac_mask) >> core->layout->frac_shift;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
if (sam9x60_frac_pll_ready(regmap, core->id) &&
(cmul == frac->mul && cfrac == frac->frac))
goto unlock;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
/* Recommended value for PMC_PLL_ACR */
if (core->characteristics->upll)
clk: at91: move sam9x60's PLL register offsets to PMC header Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-01-20 20:10:06 +08:00
val = AT91_PMC_PLL_ACR_DEFAULT_UPLL;
clk: at91: sam9x60-pll: adapt PMC_PLL_ACR default value Product datasheet recommends different values for UPLL and PLLA analog control register. Adapt accordingly. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lkml.kernel.org/r/1573478913-19737-1-git-send-email-eugen.hristev@microchip.com Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-11-11 21:28:57 +08:00
else
clk: at91: move sam9x60's PLL register offsets to PMC header Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-01-20 20:10:06 +08:00
val = AT91_PMC_PLL_ACR_DEFAULT_PLLA;
regmap_write(regmap, AT91_PMC_PLL_ACR, val);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: move sam9x60's PLL register offsets to PMC header Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-01-20 20:10:06 +08:00
regmap_write(regmap, AT91_PMC_PLL_CTRL1,
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
(frac->mul << core->layout->mul_shift) |
(frac->frac << core->layout->frac_shift));
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
if (core->characteristics->upll) {
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
/* Enable the UTMI internal bandgap */
clk: at91: move sam9x60's PLL register offsets to PMC header Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-01-20 20:10:06 +08:00
val |= AT91_PMC_PLL_ACR_UTMIBG;
regmap_write(regmap, AT91_PMC_PLL_ACR, val);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
udelay(10);
/* Enable the UTMI internal regulator */
clk: at91: move sam9x60's PLL register offsets to PMC header Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-01-20 20:10:06 +08:00
val |= AT91_PMC_PLL_ACR_UTMIVR;
regmap_write(regmap, AT91_PMC_PLL_ACR, val);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
udelay(10);
}
clk: at91: move sam9x60's PLL register offsets to PMC header Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-01-20 20:10:06 +08:00
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
AT91_PMC_PLL_UPDT_UPDATE | core->id);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL,
AT91_PMC_PLL_CTRL0_ENLOCK | AT91_PMC_PLL_CTRL0_ENPLL);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: move sam9x60's PLL register offsets to PMC header Move SAM9X60's PLL register offsets to PMC header so that the definitions would also be available from arch/arm/mach-at91/pm_suspend.S. This is necessary to disable/enable PLLA for SAM9X60 on suspend/resume. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/1579522208-19523-7-git-send-email-claudiu.beznea@microchip.com
2020-01-20 20:10:06 +08:00
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
AT91_PMC_PLL_UPDT_UPDATE | core->id);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
while (!sam9x60_pll_ready(regmap, core->id))
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
cpu_relax();
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
unlock:
spin_unlock_irqrestore(core->lock, flags);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
return 0;
}
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static void sam9x60_frac_pll_unprepare(struct clk_hw *hw)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
{
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
struct regmap *regmap = core->regmap;
unsigned long flags;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
spin_lock_irqsave(core->lock, flags);
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_ID_MSK, core->id);
regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0, AT91_PMC_PLL_CTRL0_ENPLL, 0);
if (core->characteristics->upll)
regmap_update_bits(regmap, AT91_PMC_PLL_ACR,
AT91_PMC_PLL_ACR_UTMIBG | AT91_PMC_PLL_ACR_UTMIVR, 0);
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
AT91_PMC_PLL_UPDT_UPDATE | core->id);
spin_unlock_irqrestore(core->lock, flags);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
}
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static int sam9x60_frac_pll_is_prepared(struct clk_hw *hw)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
{
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
return sam9x60_pll_ready(core->regmap, core->id);
}
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static long sam9x60_frac_pll_compute_mul_frac(struct sam9x60_pll_core *core,
unsigned long rate,
unsigned long parent_rate,
bool update)
{
struct sam9x60_frac *frac = to_sam9x60_frac(core);
unsigned long tmprate, remainder;
unsigned long nmul = 0;
unsigned long nfrac = 0;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
if (rate < FCORE_MIN || rate > FCORE_MAX)
return -ERANGE;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
/*
* Calculate the multiplier associated with the current
* divider that provide the closest rate to the requested one.
*/
nmul = mult_frac(rate, 1, parent_rate);
tmprate = mult_frac(parent_rate, nmul, 1);
remainder = rate - tmprate;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
if (remainder) {
nfrac = DIV_ROUND_CLOSEST_ULL((u64)remainder * (1 << 22),
parent_rate);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
tmprate += DIV_ROUND_CLOSEST_ULL((u64)nfrac * parent_rate,
(1 << 22));
}
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
/* Check if resulted rate is a valid. */
if (tmprate < FCORE_MIN || tmprate > FCORE_MAX)
return -ERANGE;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
if (update) {
frac->mul = nmul - 1;
frac->frac = nfrac;
}
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
return tmprate;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
}
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static long sam9x60_frac_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
{
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
return sam9x60_frac_pll_compute_mul_frac(core, rate, *parent_rate, false);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
}
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static int sam9x60_frac_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
{
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
return sam9x60_frac_pll_compute_mul_frac(core, rate, parent_rate, true);
}
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static const struct clk_ops sam9x60_frac_pll_ops = {
.prepare = sam9x60_frac_pll_prepare,
.unprepare = sam9x60_frac_pll_unprepare,
.is_prepared = sam9x60_frac_pll_is_prepared,
.recalc_rate = sam9x60_frac_pll_recalc_rate,
.round_rate = sam9x60_frac_pll_round_rate,
.set_rate = sam9x60_frac_pll_set_rate,
};
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static int sam9x60_div_pll_prepare(struct clk_hw *hw)
{
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
struct sam9x60_div *div = to_sam9x60_div(core);
struct regmap *regmap = core->regmap;
unsigned long flags;
unsigned int val, cdiv;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
spin_lock_irqsave(core->lock, flags);
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_ID_MSK, core->id);
regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
cdiv = (val & core->layout->div_mask) >> core->layout->div_shift;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
/* Stop if enabled an nothing changed. */
if (!!(val & core->layout->endiv_mask) && cdiv == div->div)
goto unlock;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
core->layout->div_mask | core->layout->endiv_mask,
(div->div << core->layout->div_shift) |
(1 << core->layout->endiv_shift));
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
AT91_PMC_PLL_UPDT_UPDATE | core->id);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
while (!sam9x60_pll_ready(regmap, core->id))
cpu_relax();
unlock:
spin_unlock_irqrestore(core->lock, flags);
return 0;
}
static void sam9x60_div_pll_unprepare(struct clk_hw *hw)
{
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
struct regmap *regmap = core->regmap;
unsigned long flags;
spin_lock_irqsave(core->lock, flags);
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_ID_MSK, core->id);
regmap_update_bits(regmap, AT91_PMC_PLL_CTRL0,
core->layout->endiv_mask, 0);
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_UPDATE | AT91_PMC_PLL_UPDT_ID_MSK,
AT91_PMC_PLL_UPDT_UPDATE | core->id);
spin_unlock_irqrestore(core->lock, flags);
}
static int sam9x60_div_pll_is_prepared(struct clk_hw *hw)
{
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
struct regmap *regmap = core->regmap;
unsigned long flags;
unsigned int val;
spin_lock_irqsave(core->lock, flags);
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_ID_MSK, core->id);
regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
spin_unlock_irqrestore(core->lock, flags);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
return !!(val & core->layout->endiv_mask);
}
static unsigned long sam9x60_div_pll_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
struct sam9x60_div *div = to_sam9x60_div(core);
return DIV_ROUND_CLOSEST_ULL(parent_rate, (div->div + 1));
}
static long sam9x60_div_pll_compute_div(struct sam9x60_pll_core *core,
unsigned long *parent_rate,
unsigned long rate)
{
const struct clk_pll_characteristics *characteristics =
core->characteristics;
struct clk_hw *parent = clk_hw_get_parent(&core->hw);
unsigned long tmp_rate, tmp_parent_rate, tmp_diff;
long best_diff = -1, best_rate = -EINVAL;
clk: at91: clk-sam9x60-pll: remove unused variable Fix variable set but not used compilation warning. Fixes: 43b1bb4a9b3e ("clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1598338751-20607-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-08-25 14:59:11 +08:00
u32 divid;
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
if (!rate)
return 0;
if (rate < characteristics->output[0].min ||
rate > characteristics->output[0].max)
return -ERANGE;
for (divid = 1; divid < core->layout->div_mask; divid++) {
tmp_parent_rate = clk_hw_round_rate(parent, rate * divid);
if (!tmp_parent_rate)
clk: at91: sam9x60-pll: check fcore against ranges According to datasheet the range of 600-1200MHz is for the frequency generated by the fractional part of the PLL (namely Fcorepllck according to datasheet). With this in mind the output range of the PLL itself (fractional + div), taking into account that the divider is 8 bits wide, is 600/256-1200Hz=2.3-1200MHz. Fixes: a436c2a447e59 ("clk: at91: add sam9x60 PLL driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:13 +08:00
continue;
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
tmp_rate = DIV_ROUND_CLOSEST_ULL(tmp_parent_rate, divid);
tmp_diff = abs(rate - tmp_rate);
if (best_diff < 0 || best_diff > tmp_diff) {
*parent_rate = tmp_parent_rate;
best_rate = tmp_rate;
best_diff = tmp_diff;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
}
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
if (!best_diff)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
break;
}
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
if (best_rate < characteristics->output[0].min ||
best_rate > characteristics->output[0].max)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
return -ERANGE;
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
return best_rate;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
}
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static long sam9x60_div_pll_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
{
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
return sam9x60_div_pll_compute_div(core, parent_rate, rate);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
}
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static int sam9x60_div_pll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
{
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
struct sam9x60_pll_core *core = to_sam9x60_pll_core(hw);
struct sam9x60_div *div = to_sam9x60_div(core);
div->div = DIV_ROUND_CLOSEST(parent_rate, rate) - 1;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
return 0;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
}
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
static const struct clk_ops sam9x60_div_pll_ops = {
.prepare = sam9x60_div_pll_prepare,
.unprepare = sam9x60_div_pll_unprepare,
.is_prepared = sam9x60_div_pll_is_prepared,
.recalc_rate = sam9x60_div_pll_recalc_rate,
.round_rate = sam9x60_div_pll_round_rate,
.set_rate = sam9x60_div_pll_set_rate,
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
};
struct clk_hw * __init
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
sam9x60_clk_register_frac_pll(struct regmap *regmap, spinlock_t *lock,
const char *name, const char *parent_name,
struct clk_hw *parent_hw, u8 id,
const struct clk_pll_characteristics *characteristics,
const struct clk_pll_layout *layout, bool critical)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
{
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
struct sam9x60_frac *frac;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
struct clk_hw *hw;
struct clk_init_data init;
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
unsigned long parent_rate, flags;
unsigned int val;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
int ret;
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
if (id > PLL_MAX_ID || !lock || !parent_hw)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
return ERR_PTR(-EINVAL);
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
frac = kzalloc(sizeof(*frac), GFP_KERNEL);
if (!frac)
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
return ERR_PTR(-ENOMEM);
init.name = name;
init.parent_names = &parent_name;
init.num_parents = 1;
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
init.ops = &sam9x60_frac_pll_ops;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
init.flags = CLK_SET_RATE_GATE;
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
if (critical)
init.flags |= CLK_IS_CRITICAL;
frac->core.id = id;
frac->core.hw.init = &init;
frac->core.characteristics = characteristics;
frac->core.layout = layout;
frac->core.regmap = regmap;
frac->core.lock = lock;
spin_lock_irqsave(frac->core.lock, flags);
if (sam9x60_pll_ready(regmap, id)) {
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_ID_MSK, id);
regmap_read(regmap, AT91_PMC_PLL_CTRL1, &val);
frac->mul = FIELD_GET(PMC_PLL_CTRL1_MUL_MSK, val);
frac->frac = FIELD_GET(PMC_PLL_CTRL1_FRACR_MSK, val);
} else {
/*
* This means the PLL is not setup by bootloaders. In this
* case we need to set the minimum rate for it. Otherwise
* a clock child of this PLL may be enabled before setting
* its rate leading to enabling this PLL with unsupported
* rate. This will lead to PLL not being locked at all.
*/
parent_rate = clk_hw_get_rate(parent_hw);
if (!parent_rate) {
hw = ERR_PTR(-EINVAL);
goto free;
}
ret = sam9x60_frac_pll_compute_mul_frac(&frac->core, FCORE_MIN,
parent_rate, true);
if (ret <= 0) {
hw = ERR_PTR(ret);
goto free;
}
}
spin_unlock_irqrestore(frac->core.lock, flags);
hw = &frac->core.hw;
ret = clk_hw_register(NULL, hw);
if (ret) {
kfree(frac);
hw = ERR_PTR(ret);
}
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
return hw;
free:
spin_unlock_irqrestore(frac->core.lock, flags);
kfree(frac);
return hw;
}
struct clk_hw * __init
sam9x60_clk_register_div_pll(struct regmap *regmap, spinlock_t *lock,
const char *name, const char *parent_name, u8 id,
const struct clk_pll_characteristics *characteristics,
const struct clk_pll_layout *layout, bool critical)
{
struct sam9x60_div *div;
struct clk_hw *hw;
struct clk_init_data init;
unsigned long flags;
unsigned int val;
int ret;
if (id > PLL_MAX_ID || !lock)
return ERR_PTR(-EINVAL);
div = kzalloc(sizeof(*div), GFP_KERNEL);
if (!div)
return ERR_PTR(-ENOMEM);
init.name = name;
init.parent_names = &parent_name;
init.num_parents = 1;
init.ops = &sam9x60_div_pll_ops;
init.flags = CLK_SET_RATE_GATE | CLK_SET_PARENT_GATE |
CLK_SET_RATE_PARENT;
if (critical)
init.flags |= CLK_IS_CRITICAL;
div->core.id = id;
div->core.hw.init = &init;
div->core.characteristics = characteristics;
div->core.layout = layout;
div->core.regmap = regmap;
div->core.lock = lock;
spin_lock_irqsave(div->core.lock, flags);
regmap_update_bits(regmap, AT91_PMC_PLL_UPDT,
AT91_PMC_PLL_UPDT_ID_MSK, id);
regmap_read(regmap, AT91_PMC_PLL_CTRL0, &val);
div->div = FIELD_GET(PMC_PLL_CTRL0_DIV_MSK, val);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
spin_unlock_irqrestore(div->core.lock, flags);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
hw = &div->core.hw;
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
ret = clk_hw_register(NULL, hw);
if (ret) {
clk: at91: clk-sam9x60-pll: re-factor to support plls with multiple outputs Some of the SAMA7G5 PLLs support multiple outputs (e.g. AUDIO PLL). For these, split the PLL clock in two: fractional clock and divider clock. In case PLLs supports multiple outputs (since these outputs are dividers (with different settings) sharing the same fractional part), it will register one fractional clock and multiple divider clocks (dividers sharing the fractional clock). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1595403506-8209-17-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-07-22 15:38:24 +08:00
kfree(div);
clk: at91: add sam9x60 PLL driver The PLLs on the sam9x60 (PLLA and USB PLL) use a different register set and programming model than the previous SoCs. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-02 20:50:54 +08:00
hw = ERR_PTR(ret);
}
return hw;
}