OpenCloudOS-Kernel/tools/perf/util/session.c

2488 lines
67 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include <errno.h>
#include <inttypes.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/zalloc.h>
#include <api/fs/fs.h>
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
#include <byteswap.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/mman.h>
#include <perf/cpumap.h>
#include "map_symbol.h"
#include "branch.h"
#include "debug.h"
#include "evlist.h"
#include "evsel.h"
#include "memswap.h"
#include "map.h"
#include "symbol.h"
#include "session.h"
#include "tool.h"
#include "perf_regs.h"
#include "asm/bug.h"
#include "auxtrace.h"
#include "thread.h"
#include "thread-stack.h"
perf report: Display arch specific diagnostic counter sets, starting with s390 On s390 the event bc000 (also named CF_DIAG) extracts the CPU Measurement Facility diagnostic counter sets and displays them as counter number and counter value pairs sorted by counter set number. Output: [root@s35lp76 perf]# ./perf report -D --stdio [00000000] Counterset:0 Counters:6 Counter:000 Value:0x000000000085ec36 Counter:001 Value:0x0000000000796c94 Counter:002 Value:0x0000000000005ada Counter:003 Value:0x0000000000092460 Counter:004 Value:0x0000000000006073 Counter:005 Value:0x00000000001a9a73 [0x000038] Counterset:1 Counters:2 Counter:000 Value:0x000000000007c59f Counter:001 Value:0x000000000002fad6 [0x000050] Counterset:2 Counters:16 Counter:000 Value:000000000000000000 Counter:001 Value:000000000000000000 Counter:002 Value:000000000000000000 Counter:003 Value:000000000000000000 Counter:004 Value:000000000000000000 Counter:005 Value:000000000000000000 Counter:006 Value:000000000000000000 Counter:007 Value:000000000000000000 Counter:008 Value:000000000000000000 Counter:009 Value:000000000000000000 Counter:010 Value:000000000000000000 Counter:011 Value:000000000000000000 Counter:012 Value:000000000000000000 Counter:013 Value:000000000000000000 Counter:014 Value:000000000000000000 Counter:015 Value:000000000000000000 [0x0000d8] Counterset:3 Counters:128 Counter:000 Value:0x000000000000020f Counter:001 Value:0x00000000000001d8 Counter:002 Value:0x000000000000d7fa Counter:003 Value:0x000000000000008b ... The number in brackets is the offset into the raw data field of the sample. New functions trace_event_sample_raw__init() and s390_sample_raw() are introduced in the code path to enable interpretation on non s390 platforms. This event bc000 attached raw data is generated only on s390 platform. Correct display on other platforms requires correct endianness handling. Committer notes: Added a init function that sets up a evlist function pointer to avoid repeated tests on evlist->env and calls to perf_env__name() that involves normalizing, etc, for each PERF_RECORD_SAMPLE. Removed needless __maybe_unused from the trace_event_raw() prototype in session.h, move it to be an static function in evlist. The 'offset' variable is a size_t, not an u64, fix it to avoid this on some arches: CC /tmp/build/perf/util/s390-sample-raw.o util/s390-sample-raw.c: In function 's390_cpumcfdg_testctr': util/s390-sample-raw.c:77:4: error: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'size_t' [-Werror=format=] pr_err("Invalid counter set entry at %#" PRIx64 "\n", ^ cc1: all warnings being treated as errors Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Link: https://lkml.kernel.org/r/9c856ac0-ef23-72b5-901d-a1f815508976@linux.ibm.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: https://lkml.kernel.org/n/tip-s3jhif06et9ug78qhclw41z1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-17 21:37:17 +08:00
#include "sample-raw.h"
#include "stat.h"
#include "ui/progress.h"
#include "../perf.h"
#include "arch/common.h"
#include <internal/lib.h>
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
#ifdef HAVE_ZSTD_SUPPORT
static int perf_session__process_compressed_event(struct perf_session *session,
union perf_event *event, u64 file_offset)
{
void *src;
size_t decomp_size, src_size;
u64 decomp_last_rem = 0;
size_t mmap_len, decomp_len = session->header.env.comp_mmap_len;
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
struct decomp *decomp, *decomp_last = session->decomp_last;
if (decomp_last) {
decomp_last_rem = decomp_last->size - decomp_last->head;
decomp_len += decomp_last_rem;
}
mmap_len = sizeof(struct decomp) + decomp_len;
decomp = mmap(NULL, mmap_len, PROT_READ|PROT_WRITE,
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
MAP_ANONYMOUS|MAP_PRIVATE, -1, 0);
if (decomp == MAP_FAILED) {
pr_err("Couldn't allocate memory for decompression\n");
return -1;
}
decomp->file_pos = file_offset;
decomp->mmap_len = mmap_len;
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
decomp->head = 0;
if (decomp_last_rem) {
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
memcpy(decomp->data, &(decomp_last->data[decomp_last->head]), decomp_last_rem);
decomp->size = decomp_last_rem;
}
src = (void *)event + sizeof(struct perf_record_compressed);
src_size = event->pack.header.size - sizeof(struct perf_record_compressed);
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
decomp_size = zstd_decompress_stream(&(session->zstd_data), src, src_size,
&(decomp->data[decomp_last_rem]), decomp_len - decomp_last_rem);
if (!decomp_size) {
munmap(decomp, mmap_len);
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
pr_err("Couldn't decompress data\n");
return -1;
}
decomp->size += decomp_size;
if (session->decomp == NULL) {
session->decomp = decomp;
session->decomp_last = decomp;
} else {
session->decomp_last->next = decomp;
session->decomp_last = decomp;
}
pr_debug("decomp (B): %zd to %zd\n", src_size, decomp_size);
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
return 0;
}
#else /* !HAVE_ZSTD_SUPPORT */
#define perf_session__process_compressed_event perf_session__process_compressed_event_stub
#endif
static int perf_session__deliver_event(struct perf_session *session,
union perf_event *event,
struct perf_tool *tool,
u64 file_offset);
static int perf_session__open(struct perf_session *session)
{
struct perf_data *data = session->data;
if (perf_session__read_header(session) < 0) {
pr_err("incompatible file format (rerun with -v to learn more)\n");
return -1;
}
if (perf_data__is_pipe(data))
return 0;
if (perf_header__has_feat(&session->header, HEADER_STAT))
return 0;
if (!evlist__valid_sample_type(session->evlist)) {
pr_err("non matching sample_type\n");
return -1;
}
if (!evlist__valid_sample_id_all(session->evlist)) {
pr_err("non matching sample_id_all\n");
return -1;
}
if (!perf_evlist__valid_read_format(session->evlist)) {
pr_err("non matching read_format\n");
return -1;
}
return 0;
}
void perf_session__set_id_hdr_size(struct perf_session *session)
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 20:25:28 +08:00
{
u16 id_hdr_size = perf_evlist__id_hdr_size(session->evlist);
machines__set_id_hdr_size(&session->machines, id_hdr_size);
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 20:25:28 +08:00
}
int perf_session__create_kernel_maps(struct perf_session *session)
{
int ret = machine__create_kernel_maps(&session->machines.host);
if (ret >= 0)
ret = machines__create_guest_kernel_maps(&session->machines);
return ret;
}
static void perf_session__destroy_kernel_maps(struct perf_session *session)
{
machines__destroy_kernel_maps(&session->machines);
}
static bool perf_session__has_comm_exec(struct perf_session *session)
{
struct evsel *evsel;
evlist__for_each_entry(session->evlist, evsel) {
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 19:24:29 +08:00
if (evsel->core.attr.comm_exec)
return true;
}
return false;
}
static void perf_session__set_comm_exec(struct perf_session *session)
{
bool comm_exec = perf_session__has_comm_exec(session);
machines__set_comm_exec(&session->machines, comm_exec);
}
static int ordered_events__deliver_event(struct ordered_events *oe,
struct ordered_event *event)
{
struct perf_session *session = container_of(oe, struct perf_session,
ordered_events);
perf tools: Optimize sample parsing for ordered events Currently when using ordered events we parse the sample twice (the perf_evlist__parse_sample function). Once before we queue the sample for sorting: perf_session__process_event perf_evlist__parse_sample(sample) perf_session__queue_event(sample.time) And then when we deliver the sorted sample: ordered_events__deliver_event perf_evlist__parse_sample perf_session__deliver_event We can skip the initial full sample parsing by using perf_evlist__parse_sample_timestamp function, which got introduced earlier. The new path looks like: perf_session__process_event perf_evlist__parse_sample_timestamp perf_session__queue_event ordered_events__deliver_event perf_session__deliver_event perf_evlist__parse_sample It saves some instructions and is slightly faster: Before: Performance counter stats for './perf.old report --stdio' (5 runs): 64,396,007,225 cycles:u ( +- 0.97% ) 105,882,112,735 instructions:u # 1.64 insn per cycle ( +- 0.00% ) 21.618103465 seconds time elapsed ( +- 1.12% ) After: Performance counter stats for './perf report --stdio' (5 runs): 60,567,807,182 cycles:u ( +- 0.40% ) 104,853,333,514 instructions:u # 1.73 insn per cycle ( +- 0.00% ) 20.168895243 seconds time elapsed ( +- 0.32% ) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-cjp2tuk0qkjs9dxzlpmm34ua@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 19:21:14 +08:00
return perf_session__deliver_event(session, event->event,
session->tool, event->file_offset);
}
struct perf_session *perf_session__new(struct perf_data *data,
bool repipe, struct perf_tool *tool)
{
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 15:20:49 +08:00
int ret = -ENOMEM;
struct perf_session *session = zalloc(sizeof(*session));
if (!session)
goto out;
session->repipe = repipe;
session->tool = tool;
INIT_LIST_HEAD(&session->auxtrace_index);
machines__init(&session->machines);
ordered_events__init(&session->ordered_events,
ordered_events__deliver_event, NULL);
perf bpf: Save bpf_prog_info in a rbtree in perf_env bpf_prog_info contains information necessary to annotate bpf programs. This patch saves bpf_prog_info for bpf programs loaded in the system. Some big picture of the next few patches: To fully annotate BPF programs with source code mapping, 4 different informations are needed: 1) PERF_RECORD_KSYMBOL 2) PERF_RECORD_BPF_EVENT 3) bpf_prog_info 4) btf Before this set, 1) and 2) in the list are already saved to perf.data file. For BPF programs that are already loaded before perf run, 1) and 2) are synthesized by perf_event__synthesize_bpf_events(). For short living BPF programs, 1) and 2) are generated by kernel. This set handles 3) and 4) from the list. Again, it is necessary to handle existing BPF program and short living program separately. This patch handles 3) for exising BPF programs while synthesizing 1) and 2) in perf_event__synthesize_bpf_events(). These data are stored in perf_env. The next patch saves these data from perf_env to perf.data as headers. Similarly, the two patches after the next saves 4) of existing BPF programs to perf_env and perf.data. Another patch later will handle 3) and 4) for short living BPF programs by monitoring 1) and 2) in a dedicate thread. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stanislav Fomichev <sdf@google.com> Cc: kernel-team@fb.com Link: http://lkml.kernel.org/r/20190312053051.2690567-7-songliubraving@fb.com [ set env->bpf_progs.infos_cnt to zero in perf_env__purge_bpf() as noted by jolsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 13:30:42 +08:00
perf_env__init(&session->header.env);
if (data) {
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 15:20:49 +08:00
ret = perf_data__open(data);
if (ret < 0)
goto out_delete;
session->data = data;
if (perf_data__is_read(data)) {
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 15:20:49 +08:00
ret = perf_session__open(session);
if (ret < 0)
goto out_delete;
/*
* set session attributes that are present in perf.data
* but not in pipe-mode.
*/
if (!data->is_pipe) {
perf_session__set_id_hdr_size(session);
perf_session__set_comm_exec(session);
}
perf report: Display arch specific diagnostic counter sets, starting with s390 On s390 the event bc000 (also named CF_DIAG) extracts the CPU Measurement Facility diagnostic counter sets and displays them as counter number and counter value pairs sorted by counter set number. Output: [root@s35lp76 perf]# ./perf report -D --stdio [00000000] Counterset:0 Counters:6 Counter:000 Value:0x000000000085ec36 Counter:001 Value:0x0000000000796c94 Counter:002 Value:0x0000000000005ada Counter:003 Value:0x0000000000092460 Counter:004 Value:0x0000000000006073 Counter:005 Value:0x00000000001a9a73 [0x000038] Counterset:1 Counters:2 Counter:000 Value:0x000000000007c59f Counter:001 Value:0x000000000002fad6 [0x000050] Counterset:2 Counters:16 Counter:000 Value:000000000000000000 Counter:001 Value:000000000000000000 Counter:002 Value:000000000000000000 Counter:003 Value:000000000000000000 Counter:004 Value:000000000000000000 Counter:005 Value:000000000000000000 Counter:006 Value:000000000000000000 Counter:007 Value:000000000000000000 Counter:008 Value:000000000000000000 Counter:009 Value:000000000000000000 Counter:010 Value:000000000000000000 Counter:011 Value:000000000000000000 Counter:012 Value:000000000000000000 Counter:013 Value:000000000000000000 Counter:014 Value:000000000000000000 Counter:015 Value:000000000000000000 [0x0000d8] Counterset:3 Counters:128 Counter:000 Value:0x000000000000020f Counter:001 Value:0x00000000000001d8 Counter:002 Value:0x000000000000d7fa Counter:003 Value:0x000000000000008b ... The number in brackets is the offset into the raw data field of the sample. New functions trace_event_sample_raw__init() and s390_sample_raw() are introduced in the code path to enable interpretation on non s390 platforms. This event bc000 attached raw data is generated only on s390 platform. Correct display on other platforms requires correct endianness handling. Committer notes: Added a init function that sets up a evlist function pointer to avoid repeated tests on evlist->env and calls to perf_env__name() that involves normalizing, etc, for each PERF_RECORD_SAMPLE. Removed needless __maybe_unused from the trace_event_raw() prototype in session.h, move it to be an static function in evlist. The 'offset' variable is a size_t, not an u64, fix it to avoid this on some arches: CC /tmp/build/perf/util/s390-sample-raw.o util/s390-sample-raw.c: In function 's390_cpumcfdg_testctr': util/s390-sample-raw.c:77:4: error: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'size_t' [-Werror=format=] pr_err("Invalid counter set entry at %#" PRIx64 "\n", ^ cc1: all warnings being treated as errors Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Link: https://lkml.kernel.org/r/9c856ac0-ef23-72b5-901d-a1f815508976@linux.ibm.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: https://lkml.kernel.org/n/tip-s3jhif06et9ug78qhclw41z1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-17 21:37:17 +08:00
perf_evlist__init_trace_event_sample_raw(session->evlist);
/* Open the directory data. */
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 15:20:49 +08:00
if (data->is_dir) {
ret = perf_data__open_dir(data);
if (ret)
goto out_delete;
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 15:20:49 +08:00
}
perf record: Put a copy of kcore into the perf.data directory Add a new 'perf record' option '--kcore' which will put a copy of /proc/kcore, kallsyms and modules into a perf.data directory. Note, that without the --kcore option, output goes to a file as previously. The tools' -o and -i options work with either a file name or directory name. Example: $ sudo perf record --kcore uname $ sudo tree perf.data perf.data ├── kcore_dir │   ├── kallsyms │   ├── kcore │   └── modules └── data $ sudo perf script -v build id event received for vmlinux: 1eaa285996affce2d74d8e66dcea09a80c9941de build id event received for [vdso]: 8bbaf5dc62a9b644b4d4e4539737e104e4a84541 Samples for 'cycles' event do not have CPU attribute set. Skipping 'cpu' field. Using CPUID GenuineIntel-6-8E-A Using perf.data/kcore_dir/kcore for kernel data Using perf.data/kcore_dir/kallsyms for symbols perf 19058 506778.423729: 1 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux) perf 19058 506778.423733: 1 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux) perf 19058 506778.423734: 7 cycles: ffffffffa2caa548 native_write_msr+0x8 (vmlinux) perf 19058 506778.423736: 117 cycles: ffffffffa2caa54a native_write_msr+0xa (vmlinux) perf 19058 506778.423738: 2092 cycles: ffffffffa2c9b7b0 native_apic_msr_write+0x0 (vmlinux) perf 19058 506778.423740: 37380 cycles: ffffffffa2f121d0 perf_event_addr_filters_exec+0x0 (vmlinux) uname 19058 506778.423751: 582673 cycles: ffffffffa303a407 propagate_protected_usage+0x147 (vmlinux) uname 19058 506778.423892: 2241841 cycles: ffffffffa2cae0c9 unwind_next_frame.part.5+0x79 (vmlinux) uname 19058 506778.424430: 2457397 cycles: ffffffffa3019232 check_memory_region+0x52 (vmlinux) Committer testing: # rm -rf perf.data* # perf record sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.024 MB perf.data (7 samples) ] # ls -l perf.data -rw-------. 1 root root 34772 Oct 21 11:08 perf.data # perf record --kcore uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.024 MB perf.data (7 samples) ] ls[root@quaco ~]# ls -lad perf.data* drwx------. 3 root root 4096 Oct 21 11:08 perf.data -rw-------. 1 root root 34772 Oct 21 11:08 perf.data.old # perf evlist -v cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # perf evlist -v -i perf.data/data cycles: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|PERIOD, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, freq: 1, enable_on_exec: 1, task: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1 # Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lore.kernel.org/lkml/20191004083121.12182-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-04 16:31:21 +08:00
if (!symbol_conf.kallsyms_name &&
!symbol_conf.vmlinux_name)
symbol_conf.kallsyms_name = perf_data__kallsyms_name(data);
}
} else {
session->machines.host.env = &perf_env;
}
session->machines.host.single_address_space =
perf_env__single_address_space(session->machines.host.env);
if (!data || perf_data__is_write(data)) {
/*
* In O_RDONLY mode this will be performed when reading the
* kernel MMAP event, in perf_event__process_mmap().
*/
if (perf_session__create_kernel_maps(session) < 0)
pr_warning("Cannot read kernel map\n");
}
/*
* In pipe-mode, evlist is empty until PERF_RECORD_HEADER_ATTR is
* processed, so evlist__sample_id_all is not meaningful here.
*/
if ((!data || !data->is_pipe) && tool && tool->ordering_requires_timestamps &&
tool->ordered_events && !evlist__sample_id_all(session->evlist)) {
perf session: Fallback to unordered processing if no sample_id_all If we are running the new perf on an old kernel without support for sample_id_all, we should fall back to the old unordered processing of events. If we didn't than we would *always* process events without timestamps out of order, whether or not we hit a reordering race. In other words, instead of there being a chance of not attributing samples correctly, we would guarantee that samples would not be attributed. While processing all events without timestamps before events with timestamps may seem like an intuitive solution, it falls down as PERF_RECORD_EXIT events would also be processed before any samples. Even with a workaround for that case, samples before/after an exec would not be attributed correctly. This patch allows commands to indicate whether they need to fall back to unordered processing, so that commands that do not care about timestamps on every event will not be affected. If we do fallback, this will print out a warning if report -D was invoked. This patch adds the test in perf_session__new so that we only need to test once per session. Commands that do not use an event_ops (such as record and top) can simply pass NULL in it's place. Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <1291951882-sup-6069@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-10 11:09:16 +08:00
dump_printf("WARNING: No sample_id_all support, falling back to unordered processing\n");
tool->ordered_events = false;
}
perf session: Fallback to unordered processing if no sample_id_all If we are running the new perf on an old kernel without support for sample_id_all, we should fall back to the old unordered processing of events. If we didn't than we would *always* process events without timestamps out of order, whether or not we hit a reordering race. In other words, instead of there being a chance of not attributing samples correctly, we would guarantee that samples would not be attributed. While processing all events without timestamps before events with timestamps may seem like an intuitive solution, it falls down as PERF_RECORD_EXIT events would also be processed before any samples. Even with a workaround for that case, samples before/after an exec would not be attributed correctly. This patch allows commands to indicate whether they need to fall back to unordered processing, so that commands that do not care about timestamps on every event will not be affected. If we do fallback, this will print out a warning if report -D was invoked. This patch adds the test in perf_session__new so that we only need to test once per session. Commands that do not use an event_ops (such as record and top) can simply pass NULL in it's place. Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <1291951882-sup-6069@au1.ibm.com> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-10 11:09:16 +08:00
return session;
out_delete:
perf_session__delete(session);
out:
perf session: Return error code for perf_session__new() function on failure This patch is to return error code of perf_new_session function on failure instead of NULL. Test Results: Before Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 0 $ After Fix: $ perf c2c report -input failed to open nput: No such file or directory $ echo $? 254 $ Committer notes: Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(..., session), i.e. we need to pass zero in case of failure, which was the case before when NULL was returned by perf_session__new() for failure, but now we need to negate the result of IS_ERR(session) to respect that TEST_ASSERT_VAL) expectation of zero meaning failure. Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-22 15:20:49 +08:00
return ERR_PTR(ret);
}
static void perf_session__delete_threads(struct perf_session *session)
{
machine__delete_threads(&session->machines.host);
}
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
static void perf_session__release_decomp_events(struct perf_session *session)
{
struct decomp *next, *decomp;
size_t mmap_len;
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
next = session->decomp;
do {
decomp = next;
if (decomp == NULL)
break;
next = decomp->next;
mmap_len = decomp->mmap_len;
munmap(decomp, mmap_len);
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
} while (1);
}
void perf_session__delete(struct perf_session *session)
{
if (session == NULL)
return;
auxtrace__free(session);
auxtrace_index__free(&session->auxtrace_index);
perf_session__destroy_kernel_maps(session);
perf_session__delete_threads(session);
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
perf_session__release_decomp_events(session);
perf_env__exit(&session->header.env);
machines__exit(&session->machines);
if (session->data)
perf_data__close(session->data);
free(session);
}
static int process_event_synth_tracing_data_stub(struct perf_session *session
__maybe_unused,
union perf_event *event
__maybe_unused)
{
dump_printf(": unhandled!\n");
return 0;
}
static int process_event_synth_attr_stub(struct perf_tool *tool __maybe_unused,
union perf_event *event __maybe_unused,
struct evlist **pevlist
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
__maybe_unused)
{
dump_printf(": unhandled!\n");
return 0;
}
static int process_event_synth_event_update_stub(struct perf_tool *tool __maybe_unused,
union perf_event *event __maybe_unused,
struct evlist **pevlist
__maybe_unused)
{
if (dump_trace)
perf_event__fprintf_event_update(event, stdout);
dump_printf(": unhandled!\n");
return 0;
}
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
static int process_event_sample_stub(struct perf_tool *tool __maybe_unused,
union perf_event *event __maybe_unused,
struct perf_sample *sample __maybe_unused,
struct evsel *evsel __maybe_unused,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
struct machine *machine __maybe_unused)
{
dump_printf(": unhandled!\n");
return 0;
}
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
static int process_event_stub(struct perf_tool *tool __maybe_unused,
union perf_event *event __maybe_unused,
struct perf_sample *sample __maybe_unused,
struct machine *machine __maybe_unused)
{
dump_printf(": unhandled!\n");
return 0;
}
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
static int process_finished_round_stub(struct perf_tool *tool __maybe_unused,
union perf_event *event __maybe_unused,
struct ordered_events *oe __maybe_unused)
{
dump_printf(": unhandled!\n");
return 0;
}
static int process_finished_round(struct perf_tool *tool,
union perf_event *event,
struct ordered_events *oe);
perf: Provide a new deterministic events reordering algorithm The current events reordering algorithm is based on a heuristic that gets broken once we deal with a very fast flow of events. Indeed the time period based flushing is not suitable anymore in the following case, assuming we have a flush period of two seconds. CPU 0 | CPU 1 | cnt1 timestamps | cnt1 timestamps | 0 | 0 1 | 1 2 | 2 3 | 3 [...] | [...] 4 seconds later If we spend too much time to read the buffers (case of a lot of events to record in each buffers or when we have a lot of CPU buffers to read), in the next pass the CPU 0 buffer could contain a slice of several seconds of events. We'll read them all and notice we've reached the period to flush. In the above example we flush the first half of the CPU 0 buffer, then we read the CPU 1 buffer where we have events that were on the flush slice and then the reordering fails. It's simple to reproduce with: perf lock record perf bench sched messaging To solve this, we use a new solution that doesn't rely on an heuristical time slice period anymore but on a deterministic basis based on how perf record does its job. perf record saves the buffers through passes. A pass is a tour on every buffers from every CPUs. This is made in order: for each CPU we read the buffers of every counters. So the more buffers we visit, the later will be the timstamps of their events. When perf record finishes a pass it records a PERF_RECORD_FINISHED_ROUND pseudo event. We record the max timestamp t found in the pass n. Assuming these timestamps are monotonic across cpus, we know that if a buffer still has events with timestamps below t, they will be all available and then read in the pass n + 1. Hence when we start to read the pass n + 2, we can safely flush every events with timestamps below t. ============ PASS n ================= CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 1 | 2 2 | 3 - | 4 <--- max recorded ============ PASS n + 1 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 3 | 5 4 | 6 5 | 7 <---- max recorded Flush every events below timestamp 4 ============ PASS n + 2 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 6 | 8 7 | 9 - | 10 Flush every events below timestamp 7 etc... It also works on perf.data versions that don't have PERF_RECORD_FINISHED_ROUND pseudo events. The difference is that the events will be only flushed in the end of the perf.data processing. It will then consume more memory and scale less with large perf.data files. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
2010-05-03 21:14:33 +08:00
static int skipn(int fd, off_t n)
{
char buf[4096];
ssize_t ret;
while (n > 0) {
ret = read(fd, buf, min(n, (off_t)sizeof(buf)));
if (ret <= 0)
return ret;
n -= ret;
}
return 0;
}
static s64 process_event_auxtrace_stub(struct perf_session *session __maybe_unused,
union perf_event *event)
{
dump_printf(": unhandled!\n");
if (perf_data__is_pipe(session->data))
skipn(perf_data__fd(session->data), event->auxtrace.size);
return event->auxtrace.size;
}
static int process_event_op2_stub(struct perf_session *session __maybe_unused,
union perf_event *event __maybe_unused)
{
dump_printf(": unhandled!\n");
return 0;
}
static
int process_event_thread_map_stub(struct perf_session *session __maybe_unused,
union perf_event *event __maybe_unused)
{
if (dump_trace)
perf_event__fprintf_thread_map(event, stdout);
dump_printf(": unhandled!\n");
return 0;
}
static
int process_event_cpu_map_stub(struct perf_session *session __maybe_unused,
union perf_event *event __maybe_unused)
{
if (dump_trace)
perf_event__fprintf_cpu_map(event, stdout);
dump_printf(": unhandled!\n");
return 0;
}
static
int process_event_stat_config_stub(struct perf_session *session __maybe_unused,
union perf_event *event __maybe_unused)
{
if (dump_trace)
perf_event__fprintf_stat_config(event, stdout);
dump_printf(": unhandled!\n");
return 0;
}
static int process_stat_stub(struct perf_session *perf_session __maybe_unused,
union perf_event *event)
{
if (dump_trace)
perf_event__fprintf_stat(event, stdout);
dump_printf(": unhandled!\n");
return 0;
}
static int process_stat_round_stub(struct perf_session *perf_session __maybe_unused,
union perf_event *event)
{
if (dump_trace)
perf_event__fprintf_stat_round(event, stdout);
dump_printf(": unhandled!\n");
return 0;
}
static int perf_session__process_compressed_event_stub(struct perf_session *session __maybe_unused,
union perf_event *event __maybe_unused,
u64 file_offset __maybe_unused)
{
dump_printf(": unhandled!\n");
return 0;
}
void perf_tool__fill_defaults(struct perf_tool *tool)
{
if (tool->sample == NULL)
tool->sample = process_event_sample_stub;
if (tool->mmap == NULL)
tool->mmap = process_event_stub;
if (tool->mmap2 == NULL)
tool->mmap2 = process_event_stub;
if (tool->comm == NULL)
tool->comm = process_event_stub;
perf buildid-list: Fix crash when processing PERF_RECORD_NAMESPACE Thomas reported that 'perf buildid-list' gets a SEGFAULT due to NULL pointer deref when he ran it on a data with namespace events. It was because the buildid_id__mark_dso_hit_ops lacks the namespace event handler and perf_too__fill_default() didn't set it. Program received signal SIGSEGV, Segmentation fault. 0x0000000000000000 in ?? () Missing separate debuginfos, use: dnf debuginfo-install audit-libs-2.7.7-1.fc25.s390x bzip2-libs-1.0.6-21.fc25.s390x elfutils-libelf-0.169-1.fc25.s390x +elfutils-libs-0.169-1.fc25.s390x libcap-ng-0.7.8-1.fc25.s390x numactl-libs-2.0.11-2.ibm.fc25.s390x openssl-libs-1.1.0e-1.1.ibm.fc25.s390x perl-libs-5.24.1-386.fc25.s390x +python-libs-2.7.13-2.fc25.s390x slang-2.3.0-7.fc25.s390x xz-libs-5.2.3-2.fc25.s390x zlib-1.2.8-10.fc25.s390x (gdb) where #0 0x0000000000000000 in ?? () #1 0x00000000010fad6a in machines__deliver_event (machines=<optimized out>, machines@entry=0x2c6fd18, evlist=<optimized out>, event=event@entry=0x3fffdf00470, sample=0x3ffffffe880, sample@entry=0x3ffffffe888, tool=tool@entry=0x1312968 <build_id.mark_dso_hit_ops>, file_offset=1136) at util/session.c:1287 #2 0x00000000010fbf4e in perf_session__deliver_event (file_offset=1136, tool=0x1312968 <build_id.mark_dso_hit_ops>, sample=0x3ffffffe888, event=0x3fffdf00470, session=0x2c6fc30) at util/session.c:1340 #3 perf_session__process_event (session=0x2c6fc30, session@entry=0x0, event=event@entry=0x3fffdf00470, file_offset=file_offset@entry=1136) at util/session.c:1522 #4 0x00000000010fddde in __perf_session__process_events (file_size=11880, data_size=<optimized out>, data_offset=<optimized out>, session=0x0) at util/session.c:1899 #5 perf_session__process_events (session=0x0, session@entry=0x2c6fc30) at util/session.c:1953 #6 0x000000000103b2ac in perf_session__list_build_ids (with_hits=<optimized out>, force=<optimized out>) at builtin-buildid-list.c:83 #7 cmd_buildid_list (argc=<optimized out>, argv=<optimized out>) at builtin-buildid-list.c:115 #8 0x00000000010a026c in run_builtin (p=0x1311f78 <commands+24>, argc=argc@entry=2, argv=argv@entry=0x3fffffff3c0) at perf.c:296 #9 0x000000000102bc00 in handle_internal_command (argv=<optimized out>, argc=2) at perf.c:348 #10 run_argv (argcp=<synthetic pointer>, argv=<synthetic pointer>) at perf.c:392 #11 main (argc=<optimized out>, argv=0x3fffffff3c0) at perf.c:536 (gdb) Fix it by adding a stub event handler for namespace event. Committer testing: Further clarifying, plain using 'perf buildid-list' will not end up in a SEGFAULT when processing a perf.data file with namespace info: # perf record -a --namespaces sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.024 MB perf.data (1058 samples) ] # perf buildid-list | wc -l 38 # perf buildid-list | head -5 e2a171c7b905826fc8494f0711ba76ab6abbd604 /lib/modules/4.14.0-rc3+/build/vmlinux 874840a02d8f8a31cedd605d0b8653145472ced3 /lib/modules/4.14.0-rc3+/kernel/arch/x86/kvm/kvm-intel.ko ea7223776730cd8a22f320040aae4d54312984bc /lib/modules/4.14.0-rc3+/kernel/drivers/gpu/drm/i915/i915.ko 5961535e6732a8edb7f22b3f148bb2fa2e0be4b9 /lib/modules/4.14.0-rc3+/kernel/drivers/gpu/drm/drm.ko f045f54aa78cf1931cc893f78b6cbc52c72a8cb1 /usr/lib64/libc-2.25.so # It is only when one asks for checking what of those entries actually had samples, i.e. when we use either -H or --with-hits, that we will process all the PERF_RECORD_ events, and since tools/perf/builtin-buildid-list.c neither explicitely set a perf_tool.namespaces() callback nor the default stub was set that we end up, when processing a PERF_RECORD_NAMESPACE record, causing a SEGFAULT: # perf buildid-list -H Segmentation fault (core dumped) ^C # Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com> Fixes: f3b3614a284d ("perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info") Link: http://lkml.kernel.org/r/20171017132900.11043-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-10-17 21:29:00 +08:00
if (tool->namespaces == NULL)
tool->namespaces = process_event_stub;
if (tool->cgroup == NULL)
tool->cgroup = process_event_stub;
if (tool->fork == NULL)
tool->fork = process_event_stub;
if (tool->exit == NULL)
tool->exit = process_event_stub;
if (tool->lost == NULL)
tool->lost = perf_event__process_lost;
perf tools: handle PERF_RECORD_LOST_SAMPLES This patch modifies the perf tool to handle the new RECORD type, PERF_RECORD_LOST_SAMPLES. The number of lost-sample events is stored in .nr_events[PERF_RECORD_LOST_SAMPLES]. The exact number of samples which the kernel dropped is stored in total_lost_samples. When the percentage of dropped samples is greater than 5%, a warning is printed. Here are some examples: Eg 1, Recording different frequently-occurring events is safe with the patch. Only a very low drop rate is associated with such actions. $ perf record -e '{cycles:p,instructions:p}' -c 20003 --no-time ~/tchain ~/tchain $ perf report -D | tail SAMPLE events: 120243 MMAP2 events: 5 LOST_SAMPLES events: 24 FINISHED_ROUND events: 15 cycles:p stats: TOTAL events: 59348 SAMPLE events: 59348 instructions:p stats: TOTAL events: 60895 SAMPLE events: 60895 $ perf report --stdio --group # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 24 # # Samples: 120K of event 'anon group { cycles:p, instructions:p }' # Event count (approx.): 24048600000 # # Overhead Command Shared Object Symbol # ................ ........... ................ .................................. # 99.74% 99.86% tchain_edit tchain_edit [.] f3 0.09% 0.02% tchain_edit tchain_edit [.] f2 0.04% 0.00% tchain_edit [kernel.vmlinux] [k] ixgbe_read_reg Eg 2, Recording the same thing multiple times can lead to high drop rate, but it is not a useful configuration. $ perf record -e '{cycles:p,cycles:p}' -c 20003 --no-time ~/tchain Warning: Processed 600592 samples and lost 99.73% samples! [perf record: Woken up 148 times to write data] [perf record: Captured and wrote 36.922 MB perf.data (1206322 samples)] [perf record: Woken up 1 times to write data] [perf record: Captured and wrote 0.121 MB perf.data (1629 samples)] Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1431285195-14269-9-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 03:13:15 +08:00
if (tool->lost_samples == NULL)
tool->lost_samples = perf_event__process_lost_samples;
if (tool->aux == NULL)
tool->aux = perf_event__process_aux;
if (tool->itrace_start == NULL)
tool->itrace_start = perf_event__process_itrace_start;
if (tool->context_switch == NULL)
tool->context_switch = perf_event__process_switch;
if (tool->ksymbol == NULL)
tool->ksymbol = perf_event__process_ksymbol;
if (tool->bpf == NULL)
tool->bpf = perf_event__process_bpf;
if (tool->text_poke == NULL)
tool->text_poke = perf_event__process_text_poke;
if (tool->read == NULL)
tool->read = process_event_sample_stub;
if (tool->throttle == NULL)
tool->throttle = process_event_stub;
if (tool->unthrottle == NULL)
tool->unthrottle = process_event_stub;
if (tool->attr == NULL)
tool->attr = process_event_synth_attr_stub;
if (tool->event_update == NULL)
tool->event_update = process_event_synth_event_update_stub;
if (tool->tracing_data == NULL)
tool->tracing_data = process_event_synth_tracing_data_stub;
if (tool->build_id == NULL)
tool->build_id = process_event_op2_stub;
if (tool->finished_round == NULL) {
if (tool->ordered_events)
tool->finished_round = process_finished_round;
perf: Provide a new deterministic events reordering algorithm The current events reordering algorithm is based on a heuristic that gets broken once we deal with a very fast flow of events. Indeed the time period based flushing is not suitable anymore in the following case, assuming we have a flush period of two seconds. CPU 0 | CPU 1 | cnt1 timestamps | cnt1 timestamps | 0 | 0 1 | 1 2 | 2 3 | 3 [...] | [...] 4 seconds later If we spend too much time to read the buffers (case of a lot of events to record in each buffers or when we have a lot of CPU buffers to read), in the next pass the CPU 0 buffer could contain a slice of several seconds of events. We'll read them all and notice we've reached the period to flush. In the above example we flush the first half of the CPU 0 buffer, then we read the CPU 1 buffer where we have events that were on the flush slice and then the reordering fails. It's simple to reproduce with: perf lock record perf bench sched messaging To solve this, we use a new solution that doesn't rely on an heuristical time slice period anymore but on a deterministic basis based on how perf record does its job. perf record saves the buffers through passes. A pass is a tour on every buffers from every CPUs. This is made in order: for each CPU we read the buffers of every counters. So the more buffers we visit, the later will be the timstamps of their events. When perf record finishes a pass it records a PERF_RECORD_FINISHED_ROUND pseudo event. We record the max timestamp t found in the pass n. Assuming these timestamps are monotonic across cpus, we know that if a buffer still has events with timestamps below t, they will be all available and then read in the pass n + 1. Hence when we start to read the pass n + 2, we can safely flush every events with timestamps below t. ============ PASS n ================= CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 1 | 2 2 | 3 - | 4 <--- max recorded ============ PASS n + 1 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 3 | 5 4 | 6 5 | 7 <---- max recorded Flush every events below timestamp 4 ============ PASS n + 2 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 6 | 8 7 | 9 - | 10 Flush every events below timestamp 7 etc... It also works on perf.data versions that don't have PERF_RECORD_FINISHED_ROUND pseudo events. The difference is that the events will be only flushed in the end of the perf.data processing. It will then consume more memory and scale less with large perf.data files. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
2010-05-03 21:14:33 +08:00
else
tool->finished_round = process_finished_round_stub;
perf: Provide a new deterministic events reordering algorithm The current events reordering algorithm is based on a heuristic that gets broken once we deal with a very fast flow of events. Indeed the time period based flushing is not suitable anymore in the following case, assuming we have a flush period of two seconds. CPU 0 | CPU 1 | cnt1 timestamps | cnt1 timestamps | 0 | 0 1 | 1 2 | 2 3 | 3 [...] | [...] 4 seconds later If we spend too much time to read the buffers (case of a lot of events to record in each buffers or when we have a lot of CPU buffers to read), in the next pass the CPU 0 buffer could contain a slice of several seconds of events. We'll read them all and notice we've reached the period to flush. In the above example we flush the first half of the CPU 0 buffer, then we read the CPU 1 buffer where we have events that were on the flush slice and then the reordering fails. It's simple to reproduce with: perf lock record perf bench sched messaging To solve this, we use a new solution that doesn't rely on an heuristical time slice period anymore but on a deterministic basis based on how perf record does its job. perf record saves the buffers through passes. A pass is a tour on every buffers from every CPUs. This is made in order: for each CPU we read the buffers of every counters. So the more buffers we visit, the later will be the timstamps of their events. When perf record finishes a pass it records a PERF_RECORD_FINISHED_ROUND pseudo event. We record the max timestamp t found in the pass n. Assuming these timestamps are monotonic across cpus, we know that if a buffer still has events with timestamps below t, they will be all available and then read in the pass n + 1. Hence when we start to read the pass n + 2, we can safely flush every events with timestamps below t. ============ PASS n ================= CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 1 | 2 2 | 3 - | 4 <--- max recorded ============ PASS n + 1 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 3 | 5 4 | 6 5 | 7 <---- max recorded Flush every events below timestamp 4 ============ PASS n + 2 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 6 | 8 7 | 9 - | 10 Flush every events below timestamp 7 etc... It also works on perf.data versions that don't have PERF_RECORD_FINISHED_ROUND pseudo events. The difference is that the events will be only flushed in the end of the perf.data processing. It will then consume more memory and scale less with large perf.data files. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
2010-05-03 21:14:33 +08:00
}
perf tools: Add id index Add an index of the event identifiers, in preparation for Intel PT. The event id (also called the sample id) is a unique number allocated by the kernel to the event created by perf_event_open(). Events can include the event id by having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER. Currently the main use of the event id is to match an event back to the evsel to which it belongs i.e. perf_evlist__id2evsel() The purpose of this patch is to make it possible to match an event back to the mmap from which it was read. The reason that is useful is because the mmap represents a time-ordered context (either for a cpu or for a thread). Intel PT decodes trace information on that basis. In full-trace mode, that information can be recorded when the Intel PT trace is read, but in sample-mode the Intel PT trace data is embedded in a sample and it is in that case that the "id index" is needed. So the mmaps are numbered (idx) and the cpu and tid recorded against the id by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel(). That information is recorded on the perf.data file in the new "id index". idx, cpu and tid are added to struct perf_sample_id (which is the node of evlist's hash table to match ids to evsels). The information can be retrieved using perf_evlist__id2sid(). Note however this all depends on having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER, otherwise ids are not recorded. The "id index" is a synthesized event record which will be created when Intel PT sampling is used by calling perf_event__synthesize_id_index(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1414417770-18602-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-27 21:49:22 +08:00
if (tool->id_index == NULL)
tool->id_index = process_event_op2_stub;
if (tool->auxtrace_info == NULL)
tool->auxtrace_info = process_event_op2_stub;
if (tool->auxtrace == NULL)
tool->auxtrace = process_event_auxtrace_stub;
if (tool->auxtrace_error == NULL)
tool->auxtrace_error = process_event_op2_stub;
if (tool->thread_map == NULL)
tool->thread_map = process_event_thread_map_stub;
if (tool->cpu_map == NULL)
tool->cpu_map = process_event_cpu_map_stub;
if (tool->stat_config == NULL)
tool->stat_config = process_event_stat_config_stub;
if (tool->stat == NULL)
tool->stat = process_stat_stub;
if (tool->stat_round == NULL)
tool->stat_round = process_stat_round_stub;
if (tool->time_conv == NULL)
tool->time_conv = process_event_op2_stub;
perf tools: Add feature header record to pipe-mode Add header record types to pipe-mode, reusing the functions used in file-mode and leveraging the new struct feat_fd. For alignment, check that synthesized events don't exceed pagesize. Add the perf_event__synthesize_feature event call back to process the new header records. Before this patch: $ perf record -o - -e cycles sleep 1 | perf report --stdio --header [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] ... After this patch: $ perf record -o - -e cycles sleep 1 | perf report --stdio --header # ======== # captured on: Mon May 22 16:33:43 2017 # ======== # # hostname : my_hostname # os release : 4.11.0-dbx-up_perf # perf version : 4.11.rc6.g6277c80 # arch : x86_64 # nrcpus online : 72 # nrcpus avail : 72 # cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz # cpuid : GenuineIntel,6,63,2 # total memory : 263457192 kB # cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1 # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] ... Support added for the subcommands: report, inject, annotate and script. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18 12:25:48 +08:00
if (tool->feature == NULL)
tool->feature = process_event_op2_stub;
if (tool->compressed == NULL)
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
tool->compressed = perf_session__process_compressed_event;
}
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
static void swap_sample_id_all(union perf_event *event, void *data)
{
void *end = (void *) event + event->header.size;
int size = end - data;
BUG_ON(size % sizeof(u64));
mem_bswap_64(data, size);
}
static void perf_event__all64_swap(union perf_event *event,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
bool sample_id_all __maybe_unused)
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
{
struct perf_event_header *hdr = &event->header;
mem_bswap_64(hdr + 1, event->header.size - sizeof(*hdr));
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
}
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
static void perf_event__comm_swap(union perf_event *event, bool sample_id_all)
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
{
event->comm.pid = bswap_32(event->comm.pid);
event->comm.tid = bswap_32(event->comm.tid);
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
if (sample_id_all) {
void *data = &event->comm.comm;
perf tools: fix ALIGN redefinition in system headers On some systems (e.g. Android), ALIGN is defined in system headers as ALIGN(p). The definition of ALIGN used in perf takes 2 parameters: ALIGN(x,a). This leads to redefinition conflicts. Redefinition error on Android: In file included from util/include/linux/list.h:1:0, from util/callchain.h:5, from util/hist.h:6, from util/session.h:4, from util/build-id.h:4, from util/annotate.c:11: util/include/linux/kernel.h:11:0: error: "ALIGN" redefined [-Werror] bionic/libc/include/sys/param.h:38:0: note: this is the location of the previous definition Conflics with system defined ALIGN in Android: util/event.c: In function 'perf_event__synthesize_comm': util/event.c:115:32: error: macro "ALIGN" passed 2 arguments, but takes just 1 util/event.c:115:9: error: 'ALIGN' undeclared (first use in this function) util/event.c:115:9: note: each undeclared identifier is reported only once for each function it appears in In order to avoid this redefinition, ALIGN is renamed to PERF_ALIGN. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-5-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:01 +08:00
data += PERF_ALIGN(strlen(data) + 1, sizeof(u64));
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
swap_sample_id_all(event, data);
}
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
}
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
static void perf_event__mmap_swap(union perf_event *event,
bool sample_id_all)
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
{
event->mmap.pid = bswap_32(event->mmap.pid);
event->mmap.tid = bswap_32(event->mmap.tid);
event->mmap.start = bswap_64(event->mmap.start);
event->mmap.len = bswap_64(event->mmap.len);
event->mmap.pgoff = bswap_64(event->mmap.pgoff);
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
if (sample_id_all) {
void *data = &event->mmap.filename;
perf tools: fix ALIGN redefinition in system headers On some systems (e.g. Android), ALIGN is defined in system headers as ALIGN(p). The definition of ALIGN used in perf takes 2 parameters: ALIGN(x,a). This leads to redefinition conflicts. Redefinition error on Android: In file included from util/include/linux/list.h:1:0, from util/callchain.h:5, from util/hist.h:6, from util/session.h:4, from util/build-id.h:4, from util/annotate.c:11: util/include/linux/kernel.h:11:0: error: "ALIGN" redefined [-Werror] bionic/libc/include/sys/param.h:38:0: note: this is the location of the previous definition Conflics with system defined ALIGN in Android: util/event.c: In function 'perf_event__synthesize_comm': util/event.c:115:32: error: macro "ALIGN" passed 2 arguments, but takes just 1 util/event.c:115:9: error: 'ALIGN' undeclared (first use in this function) util/event.c:115:9: note: each undeclared identifier is reported only once for each function it appears in In order to avoid this redefinition, ALIGN is renamed to PERF_ALIGN. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Irina Tirdea <irina.tirdea@intel.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-5-git-send-email-irina.tirdea@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:01 +08:00
data += PERF_ALIGN(strlen(data) + 1, sizeof(u64));
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
swap_sample_id_all(event, data);
}
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
}
static void perf_event__mmap2_swap(union perf_event *event,
bool sample_id_all)
{
event->mmap2.pid = bswap_32(event->mmap2.pid);
event->mmap2.tid = bswap_32(event->mmap2.tid);
event->mmap2.start = bswap_64(event->mmap2.start);
event->mmap2.len = bswap_64(event->mmap2.len);
event->mmap2.pgoff = bswap_64(event->mmap2.pgoff);
event->mmap2.maj = bswap_32(event->mmap2.maj);
event->mmap2.min = bswap_32(event->mmap2.min);
event->mmap2.ino = bswap_64(event->mmap2.ino);
event->mmap2.ino_generation = bswap_64(event->mmap2.ino_generation);
if (sample_id_all) {
void *data = &event->mmap2.filename;
data += PERF_ALIGN(strlen(data) + 1, sizeof(u64));
swap_sample_id_all(event, data);
}
}
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
static void perf_event__task_swap(union perf_event *event, bool sample_id_all)
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
{
event->fork.pid = bswap_32(event->fork.pid);
event->fork.tid = bswap_32(event->fork.tid);
event->fork.ppid = bswap_32(event->fork.ppid);
event->fork.ptid = bswap_32(event->fork.ptid);
event->fork.time = bswap_64(event->fork.time);
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
if (sample_id_all)
swap_sample_id_all(event, &event->fork + 1);
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
}
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
static void perf_event__read_swap(union perf_event *event, bool sample_id_all)
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
{
event->read.pid = bswap_32(event->read.pid);
event->read.tid = bswap_32(event->read.tid);
event->read.value = bswap_64(event->read.value);
event->read.time_enabled = bswap_64(event->read.time_enabled);
event->read.time_running = bswap_64(event->read.time_running);
event->read.id = bswap_64(event->read.id);
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
if (sample_id_all)
swap_sample_id_all(event, &event->read + 1);
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
}
static void perf_event__aux_swap(union perf_event *event, bool sample_id_all)
{
event->aux.aux_offset = bswap_64(event->aux.aux_offset);
event->aux.aux_size = bswap_64(event->aux.aux_size);
event->aux.flags = bswap_64(event->aux.flags);
if (sample_id_all)
swap_sample_id_all(event, &event->aux + 1);
}
static void perf_event__itrace_start_swap(union perf_event *event,
bool sample_id_all)
{
event->itrace_start.pid = bswap_32(event->itrace_start.pid);
event->itrace_start.tid = bswap_32(event->itrace_start.tid);
if (sample_id_all)
swap_sample_id_all(event, &event->itrace_start + 1);
}
static void perf_event__switch_swap(union perf_event *event, bool sample_id_all)
{
if (event->header.type == PERF_RECORD_SWITCH_CPU_WIDE) {
event->context_switch.next_prev_pid =
bswap_32(event->context_switch.next_prev_pid);
event->context_switch.next_prev_tid =
bswap_32(event->context_switch.next_prev_tid);
}
if (sample_id_all)
swap_sample_id_all(event, &event->context_switch + 1);
}
static void perf_event__text_poke_swap(union perf_event *event, bool sample_id_all)
{
event->text_poke.addr = bswap_64(event->text_poke.addr);
event->text_poke.old_len = bswap_16(event->text_poke.old_len);
event->text_poke.new_len = bswap_16(event->text_poke.new_len);
if (sample_id_all) {
size_t len = sizeof(event->text_poke.old_len) +
sizeof(event->text_poke.new_len) +
event->text_poke.old_len +
event->text_poke.new_len;
void *data = &event->text_poke.old_len;
data += PERF_ALIGN(len, sizeof(u64));
swap_sample_id_all(event, data);
}
}
static void perf_event__throttle_swap(union perf_event *event,
bool sample_id_all)
{
event->throttle.time = bswap_64(event->throttle.time);
event->throttle.id = bswap_64(event->throttle.id);
event->throttle.stream_id = bswap_64(event->throttle.stream_id);
if (sample_id_all)
swap_sample_id_all(event, &event->throttle + 1);
}
static void perf_event__namespaces_swap(union perf_event *event,
bool sample_id_all)
{
u64 i;
event->namespaces.pid = bswap_32(event->namespaces.pid);
event->namespaces.tid = bswap_32(event->namespaces.tid);
event->namespaces.nr_namespaces = bswap_64(event->namespaces.nr_namespaces);
for (i = 0; i < event->namespaces.nr_namespaces; i++) {
struct perf_ns_link_info *ns = &event->namespaces.link_info[i];
ns->dev = bswap_64(ns->dev);
ns->ino = bswap_64(ns->ino);
}
if (sample_id_all)
swap_sample_id_all(event, &event->namespaces.link_info[i]);
}
static void perf_event__cgroup_swap(union perf_event *event, bool sample_id_all)
{
event->cgroup.id = bswap_64(event->cgroup.id);
if (sample_id_all) {
void *data = &event->cgroup.path;
data += PERF_ALIGN(strlen(data) + 1, sizeof(u64));
swap_sample_id_all(event, data);
}
}
perf tools: Carry perf_event_attr bitfield throught different endians When the perf data file is read cross architectures, the perf_event__attr_swap function takes care about endianness of all the struct fields except the bitfield flags. The bitfield flags need to be transformed as well, since the bitfield binary storage differs for both endians. ABI says: Bit-fields are allocated from right to left (least to most significant) on little-endian implementations and from left to right (most to least significant) on big-endian implementations. The above seems to be byte specific, so we need to reverse each byte of the bitfield. 'Internet' also says this might be implementation specific and we probably need proper fix and carry perf_event_attr bitfield flags in separate data file FEAT_ section. Thought this seems to work for now. Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337151548-2396-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-16 14:59:03 +08:00
static u8 revbyte(u8 b)
{
int rev = (b >> 4) | ((b & 0xf) << 4);
rev = ((rev & 0xcc) >> 2) | ((rev & 0x33) << 2);
rev = ((rev & 0xaa) >> 1) | ((rev & 0x55) << 1);
return (u8) rev;
}
/*
* XXX this is hack in attempt to carry flags bitfield
* through endian village. ABI says:
perf tools: Carry perf_event_attr bitfield throught different endians When the perf data file is read cross architectures, the perf_event__attr_swap function takes care about endianness of all the struct fields except the bitfield flags. The bitfield flags need to be transformed as well, since the bitfield binary storage differs for both endians. ABI says: Bit-fields are allocated from right to left (least to most significant) on little-endian implementations and from left to right (most to least significant) on big-endian implementations. The above seems to be byte specific, so we need to reverse each byte of the bitfield. 'Internet' also says this might be implementation specific and we probably need proper fix and carry perf_event_attr bitfield flags in separate data file FEAT_ section. Thought this seems to work for now. Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1337151548-2396-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-16 14:59:03 +08:00
*
* Bit-fields are allocated from right to left (least to most significant)
* on little-endian implementations and from left to right (most to least
* significant) on big-endian implementations.
*
* The above seems to be byte specific, so we need to reverse each
* byte of the bitfield. 'Internet' also says this might be implementation
* specific and we probably need proper fix and carry perf_event_attr
* bitfield flags in separate data file FEAT_ section. Thought this seems
* to work for now.
*/
static void swap_bitfield(u8 *p, unsigned len)
{
unsigned i;
for (i = 0; i < len; i++) {
*p = revbyte(*p);
p++;
}
}
/* exported for swapping attributes in file header */
void perf_event__attr_swap(struct perf_event_attr *attr)
{
attr->type = bswap_32(attr->type);
attr->size = bswap_32(attr->size);
perf tools: Fix a problem when opening old perf.data with different byte order Following error occurs when trying to use 'perf report' on x86_64 to cross analysis a perf.data generated by an old perf on a big-endian machine: # perf report *** Error in `/home/w00229757/perf': free(): invalid next size (fast): 0x00000000032c99f0 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x6eeef)[0x7ff6ff7e2eef] /lib64/libc.so.6(+0x78cae)[0x7ff6ff7eccae] /lib64/libc.so.6(+0x79987)[0x7ff6ff7ed987] /path/to/perf[0x4ac734] /path/to/perf[0x4ac829] /path/to/perf(perf_header__process_sections+0x129)[0x4ad2c9] /path/to/perf(perf_session__read_header+0x2e1)[0x4ad9e1] /path/to/perf(perf_session__new+0x168)[0x4bd458] /path/to/perf(cmd_report+0xfa0)[0x43eb70] /path/to/perf[0x47adc3] /path/to/perf(main+0x5f6)[0x42fd06] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7ff6ff795bd5] /path/to/perf[0x42fe35] ======= Memory map: ======== [SNIP] The bug is in perf_event__attr_swap(). It swaps all fields in 'struct perf_event_attr' without checking whether the swapped field exist or not. In addition, in read_event_desc() allocs memory for attr according to size read from perf.data. Therefore, if the perf.data is collected by an old perf (without aux_watermark, for example), when perf_event__attr_swap() swaping attr->aux_watermark it destroy malloc's metadata. This patch introduces boundary checking in perf_event__attr_swap(). It adds macros bswap_field_64 and bswap_field_32 into perf_event__attr_swap() to make it only swap exist fields. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1434534999-85347-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 17:56:39 +08:00
#define bswap_safe(f, n) \
(attr->size > (offsetof(struct perf_event_attr, f) + \
sizeof(attr->f) * (n)))
#define bswap_field(f, sz) \
do { \
if (bswap_safe(f, 0)) \
attr->f = bswap_##sz(attr->f); \
} while(0)
perf tools: Per event max-stack settings The tooling counterpart, now it is possible to do: # perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ] # perf evlist -v sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10 cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4 cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024 # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should be further configurable by means of some .perfconfig knob. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-29 06:03:42 +08:00
#define bswap_field_16(f) bswap_field(f, 16)
perf tools: Fix a problem when opening old perf.data with different byte order Following error occurs when trying to use 'perf report' on x86_64 to cross analysis a perf.data generated by an old perf on a big-endian machine: # perf report *** Error in `/home/w00229757/perf': free(): invalid next size (fast): 0x00000000032c99f0 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x6eeef)[0x7ff6ff7e2eef] /lib64/libc.so.6(+0x78cae)[0x7ff6ff7eccae] /lib64/libc.so.6(+0x79987)[0x7ff6ff7ed987] /path/to/perf[0x4ac734] /path/to/perf[0x4ac829] /path/to/perf(perf_header__process_sections+0x129)[0x4ad2c9] /path/to/perf(perf_session__read_header+0x2e1)[0x4ad9e1] /path/to/perf(perf_session__new+0x168)[0x4bd458] /path/to/perf(cmd_report+0xfa0)[0x43eb70] /path/to/perf[0x47adc3] /path/to/perf(main+0x5f6)[0x42fd06] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7ff6ff795bd5] /path/to/perf[0x42fe35] ======= Memory map: ======== [SNIP] The bug is in perf_event__attr_swap(). It swaps all fields in 'struct perf_event_attr' without checking whether the swapped field exist or not. In addition, in read_event_desc() allocs memory for attr according to size read from perf.data. Therefore, if the perf.data is collected by an old perf (without aux_watermark, for example), when perf_event__attr_swap() swaping attr->aux_watermark it destroy malloc's metadata. This patch introduces boundary checking in perf_event__attr_swap(). It adds macros bswap_field_64 and bswap_field_32 into perf_event__attr_swap() to make it only swap exist fields. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1434534999-85347-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 17:56:39 +08:00
#define bswap_field_32(f) bswap_field(f, 32)
#define bswap_field_64(f) bswap_field(f, 64)
bswap_field_64(config);
bswap_field_64(sample_period);
bswap_field_64(sample_type);
bswap_field_64(read_format);
bswap_field_32(wakeup_events);
bswap_field_32(bp_type);
bswap_field_64(bp_addr);
bswap_field_64(bp_len);
bswap_field_64(branch_sample_type);
bswap_field_64(sample_regs_user);
bswap_field_32(sample_stack_user);
bswap_field_32(aux_watermark);
perf tools: Per event max-stack settings The tooling counterpart, now it is possible to do: # perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ] # perf evlist -v sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10 cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4 cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024 # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should be further configurable by means of some .perfconfig knob. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Milian Wolff <milian.wolff@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-04-29 06:03:42 +08:00
bswap_field_16(sample_max_stack);
bswap_field_32(aux_sample_size);
perf tools: Fix a problem when opening old perf.data with different byte order Following error occurs when trying to use 'perf report' on x86_64 to cross analysis a perf.data generated by an old perf on a big-endian machine: # perf report *** Error in `/home/w00229757/perf': free(): invalid next size (fast): 0x00000000032c99f0 *** ======= Backtrace: ========= /lib64/libc.so.6(+0x6eeef)[0x7ff6ff7e2eef] /lib64/libc.so.6(+0x78cae)[0x7ff6ff7eccae] /lib64/libc.so.6(+0x79987)[0x7ff6ff7ed987] /path/to/perf[0x4ac734] /path/to/perf[0x4ac829] /path/to/perf(perf_header__process_sections+0x129)[0x4ad2c9] /path/to/perf(perf_session__read_header+0x2e1)[0x4ad9e1] /path/to/perf(perf_session__new+0x168)[0x4bd458] /path/to/perf(cmd_report+0xfa0)[0x43eb70] /path/to/perf[0x47adc3] /path/to/perf(main+0x5f6)[0x42fd06] /lib64/libc.so.6(__libc_start_main+0xf5)[0x7ff6ff795bd5] /path/to/perf[0x42fe35] ======= Memory map: ======== [SNIP] The bug is in perf_event__attr_swap(). It swaps all fields in 'struct perf_event_attr' without checking whether the swapped field exist or not. In addition, in read_event_desc() allocs memory for attr according to size read from perf.data. Therefore, if the perf.data is collected by an old perf (without aux_watermark, for example), when perf_event__attr_swap() swaping attr->aux_watermark it destroy malloc's metadata. This patch introduces boundary checking in perf_event__attr_swap(). It adds macros bswap_field_64 and bswap_field_32 into perf_event__attr_swap() to make it only swap exist fields. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1434534999-85347-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-06-17 17:56:39 +08:00
/*
* After read_format are bitfields. Check read_format because
* we are unable to use offsetof on bitfield.
*/
if (bswap_safe(read_format, 1))
swap_bitfield((u8 *) (&attr->read_format + 1),
sizeof(u64));
#undef bswap_field_64
#undef bswap_field_32
#undef bswap_field
#undef bswap_safe
}
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
static void perf_event__hdr_attr_swap(union perf_event *event,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
bool sample_id_all __maybe_unused)
{
size_t size;
perf_event__attr_swap(&event->attr.attr);
size = event->header.size;
size -= (void *)&event->attr.id - (void *)event;
mem_bswap_64(event->attr.id, size);
}
static void perf_event__event_update_swap(union perf_event *event,
bool sample_id_all __maybe_unused)
{
event->event_update.type = bswap_64(event->event_update.type);
event->event_update.id = bswap_64(event->event_update.id);
}
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
static void perf_event__event_type_swap(union perf_event *event,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
bool sample_id_all __maybe_unused)
{
event->event_type.event_type.event_id =
bswap_64(event->event_type.event_type.event_id);
}
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
static void perf_event__tracing_data_swap(union perf_event *event,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
bool sample_id_all __maybe_unused)
{
event->tracing_data.size = bswap_32(event->tracing_data.size);
}
static void perf_event__auxtrace_info_swap(union perf_event *event,
bool sample_id_all __maybe_unused)
{
size_t size;
event->auxtrace_info.type = bswap_32(event->auxtrace_info.type);
size = event->header.size;
size -= (void *)&event->auxtrace_info.priv - (void *)event;
mem_bswap_64(event->auxtrace_info.priv, size);
}
static void perf_event__auxtrace_swap(union perf_event *event,
bool sample_id_all __maybe_unused)
{
event->auxtrace.size = bswap_64(event->auxtrace.size);
event->auxtrace.offset = bswap_64(event->auxtrace.offset);
event->auxtrace.reference = bswap_64(event->auxtrace.reference);
event->auxtrace.idx = bswap_32(event->auxtrace.idx);
event->auxtrace.tid = bswap_32(event->auxtrace.tid);
event->auxtrace.cpu = bswap_32(event->auxtrace.cpu);
}
static void perf_event__auxtrace_error_swap(union perf_event *event,
bool sample_id_all __maybe_unused)
{
event->auxtrace_error.type = bswap_32(event->auxtrace_error.type);
event->auxtrace_error.code = bswap_32(event->auxtrace_error.code);
event->auxtrace_error.cpu = bswap_32(event->auxtrace_error.cpu);
event->auxtrace_error.pid = bswap_32(event->auxtrace_error.pid);
event->auxtrace_error.tid = bswap_32(event->auxtrace_error.tid);
event->auxtrace_error.fmt = bswap_32(event->auxtrace_error.fmt);
event->auxtrace_error.ip = bswap_64(event->auxtrace_error.ip);
if (event->auxtrace_error.fmt)
event->auxtrace_error.time = bswap_64(event->auxtrace_error.time);
}
static void perf_event__thread_map_swap(union perf_event *event,
bool sample_id_all __maybe_unused)
{
unsigned i;
event->thread_map.nr = bswap_64(event->thread_map.nr);
for (i = 0; i < event->thread_map.nr; i++)
event->thread_map.entries[i].pid = bswap_64(event->thread_map.entries[i].pid);
}
static void perf_event__cpu_map_swap(union perf_event *event,
bool sample_id_all __maybe_unused)
{
struct perf_record_cpu_map_data *data = &event->cpu_map.data;
struct cpu_map_entries *cpus;
struct perf_record_record_cpu_map *mask;
unsigned i;
data->type = bswap_64(data->type);
switch (data->type) {
case PERF_CPU_MAP__CPUS:
cpus = (struct cpu_map_entries *)data->data;
cpus->nr = bswap_16(cpus->nr);
for (i = 0; i < cpus->nr; i++)
cpus->cpu[i] = bswap_16(cpus->cpu[i]);
break;
case PERF_CPU_MAP__MASK:
mask = (struct perf_record_record_cpu_map *)data->data;
mask->nr = bswap_16(mask->nr);
mask->long_size = bswap_16(mask->long_size);
switch (mask->long_size) {
case 4: mem_bswap_32(&mask->mask, mask->nr); break;
case 8: mem_bswap_64(&mask->mask, mask->nr); break;
default:
pr_err("cpu_map swap: unsupported long size\n");
}
default:
break;
}
}
static void perf_event__stat_config_swap(union perf_event *event,
bool sample_id_all __maybe_unused)
{
u64 size;
size = event->stat_config.nr * sizeof(event->stat_config.data[0]);
size += 1; /* nr item itself */
mem_bswap_64(&event->stat_config.nr, size);
}
static void perf_event__stat_swap(union perf_event *event,
bool sample_id_all __maybe_unused)
{
event->stat.id = bswap_64(event->stat.id);
event->stat.thread = bswap_32(event->stat.thread);
event->stat.cpu = bswap_32(event->stat.cpu);
event->stat.val = bswap_64(event->stat.val);
event->stat.ena = bswap_64(event->stat.ena);
event->stat.run = bswap_64(event->stat.run);
}
static void perf_event__stat_round_swap(union perf_event *event,
bool sample_id_all __maybe_unused)
{
event->stat_round.type = bswap_64(event->stat_round.type);
event->stat_round.time = bswap_64(event->stat_round.time);
}
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
typedef void (*perf_event__swap_op)(union perf_event *event,
bool sample_id_all);
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
static perf_event__swap_op perf_event__swap_ops[] = {
[PERF_RECORD_MMAP] = perf_event__mmap_swap,
[PERF_RECORD_MMAP2] = perf_event__mmap2_swap,
[PERF_RECORD_COMM] = perf_event__comm_swap,
[PERF_RECORD_FORK] = perf_event__task_swap,
[PERF_RECORD_EXIT] = perf_event__task_swap,
[PERF_RECORD_LOST] = perf_event__all64_swap,
[PERF_RECORD_READ] = perf_event__read_swap,
[PERF_RECORD_THROTTLE] = perf_event__throttle_swap,
[PERF_RECORD_UNTHROTTLE] = perf_event__throttle_swap,
[PERF_RECORD_SAMPLE] = perf_event__all64_swap,
[PERF_RECORD_AUX] = perf_event__aux_swap,
[PERF_RECORD_ITRACE_START] = perf_event__itrace_start_swap,
perf tools: handle PERF_RECORD_LOST_SAMPLES This patch modifies the perf tool to handle the new RECORD type, PERF_RECORD_LOST_SAMPLES. The number of lost-sample events is stored in .nr_events[PERF_RECORD_LOST_SAMPLES]. The exact number of samples which the kernel dropped is stored in total_lost_samples. When the percentage of dropped samples is greater than 5%, a warning is printed. Here are some examples: Eg 1, Recording different frequently-occurring events is safe with the patch. Only a very low drop rate is associated with such actions. $ perf record -e '{cycles:p,instructions:p}' -c 20003 --no-time ~/tchain ~/tchain $ perf report -D | tail SAMPLE events: 120243 MMAP2 events: 5 LOST_SAMPLES events: 24 FINISHED_ROUND events: 15 cycles:p stats: TOTAL events: 59348 SAMPLE events: 59348 instructions:p stats: TOTAL events: 60895 SAMPLE events: 60895 $ perf report --stdio --group # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 24 # # Samples: 120K of event 'anon group { cycles:p, instructions:p }' # Event count (approx.): 24048600000 # # Overhead Command Shared Object Symbol # ................ ........... ................ .................................. # 99.74% 99.86% tchain_edit tchain_edit [.] f3 0.09% 0.02% tchain_edit tchain_edit [.] f2 0.04% 0.00% tchain_edit [kernel.vmlinux] [k] ixgbe_read_reg Eg 2, Recording the same thing multiple times can lead to high drop rate, but it is not a useful configuration. $ perf record -e '{cycles:p,cycles:p}' -c 20003 --no-time ~/tchain Warning: Processed 600592 samples and lost 99.73% samples! [perf record: Woken up 148 times to write data] [perf record: Captured and wrote 36.922 MB perf.data (1206322 samples)] [perf record: Woken up 1 times to write data] [perf record: Captured and wrote 0.121 MB perf.data (1629 samples)] Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1431285195-14269-9-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 03:13:15 +08:00
[PERF_RECORD_LOST_SAMPLES] = perf_event__all64_swap,
[PERF_RECORD_SWITCH] = perf_event__switch_swap,
[PERF_RECORD_SWITCH_CPU_WIDE] = perf_event__switch_swap,
[PERF_RECORD_NAMESPACES] = perf_event__namespaces_swap,
[PERF_RECORD_CGROUP] = perf_event__cgroup_swap,
[PERF_RECORD_TEXT_POKE] = perf_event__text_poke_swap,
[PERF_RECORD_HEADER_ATTR] = perf_event__hdr_attr_swap,
[PERF_RECORD_HEADER_EVENT_TYPE] = perf_event__event_type_swap,
[PERF_RECORD_HEADER_TRACING_DATA] = perf_event__tracing_data_swap,
[PERF_RECORD_HEADER_BUILD_ID] = NULL,
perf tools: Add id index Add an index of the event identifiers, in preparation for Intel PT. The event id (also called the sample id) is a unique number allocated by the kernel to the event created by perf_event_open(). Events can include the event id by having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER. Currently the main use of the event id is to match an event back to the evsel to which it belongs i.e. perf_evlist__id2evsel() The purpose of this patch is to make it possible to match an event back to the mmap from which it was read. The reason that is useful is because the mmap represents a time-ordered context (either for a cpu or for a thread). Intel PT decodes trace information on that basis. In full-trace mode, that information can be recorded when the Intel PT trace is read, but in sample-mode the Intel PT trace data is embedded in a sample and it is in that case that the "id index" is needed. So the mmaps are numbered (idx) and the cpu and tid recorded against the id by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel(). That information is recorded on the perf.data file in the new "id index". idx, cpu and tid are added to struct perf_sample_id (which is the node of evlist's hash table to match ids to evsels). The information can be retrieved using perf_evlist__id2sid(). Note however this all depends on having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER, otherwise ids are not recorded. The "id index" is a synthesized event record which will be created when Intel PT sampling is used by calling perf_event__synthesize_id_index(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1414417770-18602-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-27 21:49:22 +08:00
[PERF_RECORD_ID_INDEX] = perf_event__all64_swap,
[PERF_RECORD_AUXTRACE_INFO] = perf_event__auxtrace_info_swap,
[PERF_RECORD_AUXTRACE] = perf_event__auxtrace_swap,
[PERF_RECORD_AUXTRACE_ERROR] = perf_event__auxtrace_error_swap,
[PERF_RECORD_THREAD_MAP] = perf_event__thread_map_swap,
[PERF_RECORD_CPU_MAP] = perf_event__cpu_map_swap,
[PERF_RECORD_STAT_CONFIG] = perf_event__stat_config_swap,
[PERF_RECORD_STAT] = perf_event__stat_swap,
[PERF_RECORD_STAT_ROUND] = perf_event__stat_round_swap,
[PERF_RECORD_EVENT_UPDATE] = perf_event__event_update_swap,
[PERF_RECORD_TIME_CONV] = perf_event__all64_swap,
[PERF_RECORD_HEADER_MAX] = NULL,
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
};
perf: Provide a new deterministic events reordering algorithm The current events reordering algorithm is based on a heuristic that gets broken once we deal with a very fast flow of events. Indeed the time period based flushing is not suitable anymore in the following case, assuming we have a flush period of two seconds. CPU 0 | CPU 1 | cnt1 timestamps | cnt1 timestamps | 0 | 0 1 | 1 2 | 2 3 | 3 [...] | [...] 4 seconds later If we spend too much time to read the buffers (case of a lot of events to record in each buffers or when we have a lot of CPU buffers to read), in the next pass the CPU 0 buffer could contain a slice of several seconds of events. We'll read them all and notice we've reached the period to flush. In the above example we flush the first half of the CPU 0 buffer, then we read the CPU 1 buffer where we have events that were on the flush slice and then the reordering fails. It's simple to reproduce with: perf lock record perf bench sched messaging To solve this, we use a new solution that doesn't rely on an heuristical time slice period anymore but on a deterministic basis based on how perf record does its job. perf record saves the buffers through passes. A pass is a tour on every buffers from every CPUs. This is made in order: for each CPU we read the buffers of every counters. So the more buffers we visit, the later will be the timstamps of their events. When perf record finishes a pass it records a PERF_RECORD_FINISHED_ROUND pseudo event. We record the max timestamp t found in the pass n. Assuming these timestamps are monotonic across cpus, we know that if a buffer still has events with timestamps below t, they will be all available and then read in the pass n + 1. Hence when we start to read the pass n + 2, we can safely flush every events with timestamps below t. ============ PASS n ================= CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 1 | 2 2 | 3 - | 4 <--- max recorded ============ PASS n + 1 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 3 | 5 4 | 6 5 | 7 <---- max recorded Flush every events below timestamp 4 ============ PASS n + 2 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 6 | 8 7 | 9 - | 10 Flush every events below timestamp 7 etc... It also works on perf.data versions that don't have PERF_RECORD_FINISHED_ROUND pseudo events. The difference is that the events will be only flushed in the end of the perf.data processing. It will then consume more memory and scale less with large perf.data files. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
2010-05-03 21:14:33 +08:00
/*
* When perf record finishes a pass on every buffers, it records this pseudo
* event.
* We record the max timestamp t found in the pass n.
* Assuming these timestamps are monotonic across cpus, we know that if
* a buffer still has events with timestamps below t, they will be all
* available and then read in the pass n + 1.
* Hence when we start to read the pass n + 2, we can safely flush every
* events with timestamps below t.
*
* ============ PASS n =================
* CPU 0 | CPU 1
* |
* cnt1 timestamps | cnt2 timestamps
* 1 | 2
* 2 | 3
* - | 4 <--- max recorded
*
* ============ PASS n + 1 ==============
* CPU 0 | CPU 1
* |
* cnt1 timestamps | cnt2 timestamps
* 3 | 5
* 4 | 6
* 5 | 7 <---- max recorded
*
* Flush every events below timestamp 4
*
* ============ PASS n + 2 ==============
* CPU 0 | CPU 1
* |
* cnt1 timestamps | cnt2 timestamps
* 6 | 8
* 7 | 9
* - | 10
*
* Flush every events below timestamp 7
* etc...
*/
static int process_finished_round(struct perf_tool *tool __maybe_unused,
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 06:15:03 +08:00
union perf_event *event __maybe_unused,
struct ordered_events *oe)
perf: Provide a new deterministic events reordering algorithm The current events reordering algorithm is based on a heuristic that gets broken once we deal with a very fast flow of events. Indeed the time period based flushing is not suitable anymore in the following case, assuming we have a flush period of two seconds. CPU 0 | CPU 1 | cnt1 timestamps | cnt1 timestamps | 0 | 0 1 | 1 2 | 2 3 | 3 [...] | [...] 4 seconds later If we spend too much time to read the buffers (case of a lot of events to record in each buffers or when we have a lot of CPU buffers to read), in the next pass the CPU 0 buffer could contain a slice of several seconds of events. We'll read them all and notice we've reached the period to flush. In the above example we flush the first half of the CPU 0 buffer, then we read the CPU 1 buffer where we have events that were on the flush slice and then the reordering fails. It's simple to reproduce with: perf lock record perf bench sched messaging To solve this, we use a new solution that doesn't rely on an heuristical time slice period anymore but on a deterministic basis based on how perf record does its job. perf record saves the buffers through passes. A pass is a tour on every buffers from every CPUs. This is made in order: for each CPU we read the buffers of every counters. So the more buffers we visit, the later will be the timstamps of their events. When perf record finishes a pass it records a PERF_RECORD_FINISHED_ROUND pseudo event. We record the max timestamp t found in the pass n. Assuming these timestamps are monotonic across cpus, we know that if a buffer still has events with timestamps below t, they will be all available and then read in the pass n + 1. Hence when we start to read the pass n + 2, we can safely flush every events with timestamps below t. ============ PASS n ================= CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 1 | 2 2 | 3 - | 4 <--- max recorded ============ PASS n + 1 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 3 | 5 4 | 6 5 | 7 <---- max recorded Flush every events below timestamp 4 ============ PASS n + 2 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 6 | 8 7 | 9 - | 10 Flush every events below timestamp 7 etc... It also works on perf.data versions that don't have PERF_RECORD_FINISHED_ROUND pseudo events. The difference is that the events will be only flushed in the end of the perf.data processing. It will then consume more memory and scale less with large perf.data files. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
2010-05-03 21:14:33 +08:00
{
if (dump_trace)
fprintf(stdout, "\n");
return ordered_events__flush(oe, OE_FLUSH__ROUND);
perf: Provide a new deterministic events reordering algorithm The current events reordering algorithm is based on a heuristic that gets broken once we deal with a very fast flow of events. Indeed the time period based flushing is not suitable anymore in the following case, assuming we have a flush period of two seconds. CPU 0 | CPU 1 | cnt1 timestamps | cnt1 timestamps | 0 | 0 1 | 1 2 | 2 3 | 3 [...] | [...] 4 seconds later If we spend too much time to read the buffers (case of a lot of events to record in each buffers or when we have a lot of CPU buffers to read), in the next pass the CPU 0 buffer could contain a slice of several seconds of events. We'll read them all and notice we've reached the period to flush. In the above example we flush the first half of the CPU 0 buffer, then we read the CPU 1 buffer where we have events that were on the flush slice and then the reordering fails. It's simple to reproduce with: perf lock record perf bench sched messaging To solve this, we use a new solution that doesn't rely on an heuristical time slice period anymore but on a deterministic basis based on how perf record does its job. perf record saves the buffers through passes. A pass is a tour on every buffers from every CPUs. This is made in order: for each CPU we read the buffers of every counters. So the more buffers we visit, the later will be the timstamps of their events. When perf record finishes a pass it records a PERF_RECORD_FINISHED_ROUND pseudo event. We record the max timestamp t found in the pass n. Assuming these timestamps are monotonic across cpus, we know that if a buffer still has events with timestamps below t, they will be all available and then read in the pass n + 1. Hence when we start to read the pass n + 2, we can safely flush every events with timestamps below t. ============ PASS n ================= CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 1 | 2 2 | 3 - | 4 <--- max recorded ============ PASS n + 1 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 3 | 5 4 | 6 5 | 7 <---- max recorded Flush every events below timestamp 4 ============ PASS n + 2 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 6 | 8 7 | 9 - | 10 Flush every events below timestamp 7 etc... It also works on perf.data versions that don't have PERF_RECORD_FINISHED_ROUND pseudo events. The difference is that the events will be only flushed in the end of the perf.data processing. It will then consume more memory and scale less with large perf.data files. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
2010-05-03 21:14:33 +08:00
}
int perf_session__queue_event(struct perf_session *s, union perf_event *event,
u64 timestamp, u64 file_offset)
perf: Generalize perf lock's sample event reordering to the session layer The sample events recorded by perf record are not time ordered because we have one buffer per cpu for each event (even demultiplexed per task/per cpu for task bound events). But when we read trace events we want them to be ordered by time because many state machines are involved. There are currently two ways perf tools deal with that: - use -M to multiplex every buffers (perf sched, perf kmem) But this creates a lot of contention in SMP machines on record time. - use a post-processing time reordering (perf timechart, perf lock) The reordering used by timechart is simple but doesn't scale well with huge flow of events, in terms of performance and memory use (unusable with perf lock for example). Perf lock has its own samples reordering that flushes its memory use in a regular basis and that uses a sorting based on the previous event queued (a new event to be queued is close to the previous one most of the time). This patch proposes to export perf lock's samples reordering facility to the session layer that reads the events. So if a tool wants to get ordered sample events, it needs to set its struct perf_event_ops::ordered_samples to true and that's it. This prepares tracing based perf tools to get rid of the need to use buffers multiplexing (-M) or to implement their own reordering. Also lower the flush period to 2 as it's sufficient already. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-04-24 06:04:12 +08:00
{
return ordered_events__queue(&s->ordered_events, event, timestamp, file_offset);
}
perf: Generalize perf lock's sample event reordering to the session layer The sample events recorded by perf record are not time ordered because we have one buffer per cpu for each event (even demultiplexed per task/per cpu for task bound events). But when we read trace events we want them to be ordered by time because many state machines are involved. There are currently two ways perf tools deal with that: - use -M to multiplex every buffers (perf sched, perf kmem) But this creates a lot of contention in SMP machines on record time. - use a post-processing time reordering (perf timechart, perf lock) The reordering used by timechart is simple but doesn't scale well with huge flow of events, in terms of performance and memory use (unusable with perf lock for example). Perf lock has its own samples reordering that flushes its memory use in a regular basis and that uses a sorting based on the previous event queued (a new event to be queued is close to the previous one most of the time). This patch proposes to export perf lock's samples reordering facility to the session layer that reads the events. So if a tool wants to get ordered sample events, it needs to set its struct perf_event_ops::ordered_samples to true and that's it. This prepares tracing based perf tools to get rid of the need to use buffers multiplexing (-M) or to implement their own reordering. Also lower the flush period to 2 as it's sufficient already. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-04-24 06:04:12 +08:00
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
static void callchain__lbr_callstack_printf(struct perf_sample *sample)
{
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
struct ip_callchain *callchain = sample->callchain;
struct branch_stack *lbr_stack = sample->branch_stack;
perf tools: Add hw_idx in struct branch_stack The low level index of raw branch records for the most recent branch can be recorded in a sample with PERF_SAMPLE_BRANCH_HW_INDEX branch_sample_type. Extend struct branch_stack to support it. However, if the PERF_SAMPLE_BRANCH_HW_INDEX is not applied, only nr and entries[] will be output by kernel. The pointer of entries[] could be wrong, since the output format is different with new struct branch_stack. Add a variable no_hw_idx in struct perf_sample to indicate whether the hw_idx is output. Add get_branch_entry() to return corresponding pointer of entries[0]. To make dummy branch sample consistent as new branch sample, add hw_idx in struct dummy_branch_stack for cs-etm and intel-pt. Apply the new struct branch_stack for synthetic events as well. Extend test case sample-parsing to support new struct branch_stack. Committer notes: Renamed get_branch_entries() to perf_sample__branch_entries() to have proper namespacing and pave the way for this to be moved to libperf, eventually. Add 'static' to that inline as it is in a header. Add 'hw_idx' to 'struct dummy_branch_stack' in cs-etm.c to fix the build on arm64. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200228163011.19358-2-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-29 00:30:00 +08:00
struct branch_entry *entries = perf_sample__branch_entries(sample);
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
u64 kernel_callchain_nr = callchain->nr;
unsigned int i;
perf: Generalize perf lock's sample event reordering to the session layer The sample events recorded by perf record are not time ordered because we have one buffer per cpu for each event (even demultiplexed per task/per cpu for task bound events). But when we read trace events we want them to be ordered by time because many state machines are involved. There are currently two ways perf tools deal with that: - use -M to multiplex every buffers (perf sched, perf kmem) But this creates a lot of contention in SMP machines on record time. - use a post-processing time reordering (perf timechart, perf lock) The reordering used by timechart is simple but doesn't scale well with huge flow of events, in terms of performance and memory use (unusable with perf lock for example). Perf lock has its own samples reordering that flushes its memory use in a regular basis and that uses a sorting based on the previous event queued (a new event to be queued is close to the previous one most of the time). This patch proposes to export perf lock's samples reordering facility to the session layer that reads the events. So if a tool wants to get ordered sample events, it needs to set its struct perf_event_ops::ordered_samples to true and that's it. This prepares tracing based perf tools to get rid of the need to use buffers multiplexing (-M) or to implement their own reordering. Also lower the flush period to 2 as it's sufficient already. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-04-24 06:04:12 +08:00
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
for (i = 0; i < kernel_callchain_nr; i++) {
if (callchain->ips[i] == PERF_CONTEXT_USER)
break;
}
if ((i != kernel_callchain_nr) && lbr_stack->nr) {
u64 total_nr;
/*
* LBR callstack can only get user call chain,
* i is kernel call chain number,
* 1 is PERF_CONTEXT_USER.
*
* The user call chain is stored in LBR registers.
* LBR are pair registers. The caller is stored
* in "from" register, while the callee is stored
* in "to" register.
* For example, there is a call stack
* "A"->"B"->"C"->"D".
* The LBR registers will recorde like
* "C"->"D", "B"->"C", "A"->"B".
* So only the first "to" register and all "from"
* registers are needed to construct the whole stack.
*/
total_nr = i + 1 + lbr_stack->nr + 1;
kernel_callchain_nr = i + 1;
printf("... LBR call chain: nr:%" PRIu64 "\n", total_nr);
for (i = 0; i < kernel_callchain_nr; i++)
printf("..... %2d: %016" PRIx64 "\n",
i, callchain->ips[i]);
printf("..... %2d: %016" PRIx64 "\n",
perf tools: Add hw_idx in struct branch_stack The low level index of raw branch records for the most recent branch can be recorded in a sample with PERF_SAMPLE_BRANCH_HW_INDEX branch_sample_type. Extend struct branch_stack to support it. However, if the PERF_SAMPLE_BRANCH_HW_INDEX is not applied, only nr and entries[] will be output by kernel. The pointer of entries[] could be wrong, since the output format is different with new struct branch_stack. Add a variable no_hw_idx in struct perf_sample to indicate whether the hw_idx is output. Add get_branch_entry() to return corresponding pointer of entries[0]. To make dummy branch sample consistent as new branch sample, add hw_idx in struct dummy_branch_stack for cs-etm and intel-pt. Apply the new struct branch_stack for synthetic events as well. Extend test case sample-parsing to support new struct branch_stack. Committer notes: Renamed get_branch_entries() to perf_sample__branch_entries() to have proper namespacing and pave the way for this to be moved to libperf, eventually. Add 'static' to that inline as it is in a header. Add 'hw_idx' to 'struct dummy_branch_stack' in cs-etm.c to fix the build on arm64. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200228163011.19358-2-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-29 00:30:00 +08:00
(int)(kernel_callchain_nr), entries[0].to);
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
for (i = 0; i < lbr_stack->nr; i++)
printf("..... %2d: %016" PRIx64 "\n",
perf tools: Add hw_idx in struct branch_stack The low level index of raw branch records for the most recent branch can be recorded in a sample with PERF_SAMPLE_BRANCH_HW_INDEX branch_sample_type. Extend struct branch_stack to support it. However, if the PERF_SAMPLE_BRANCH_HW_INDEX is not applied, only nr and entries[] will be output by kernel. The pointer of entries[] could be wrong, since the output format is different with new struct branch_stack. Add a variable no_hw_idx in struct perf_sample to indicate whether the hw_idx is output. Add get_branch_entry() to return corresponding pointer of entries[0]. To make dummy branch sample consistent as new branch sample, add hw_idx in struct dummy_branch_stack for cs-etm and intel-pt. Apply the new struct branch_stack for synthetic events as well. Extend test case sample-parsing to support new struct branch_stack. Committer notes: Renamed get_branch_entries() to perf_sample__branch_entries() to have proper namespacing and pave the way for this to be moved to libperf, eventually. Add 'static' to that inline as it is in a header. Add 'hw_idx' to 'struct dummy_branch_stack' in cs-etm.c to fix the build on arm64. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200228163011.19358-2-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-29 00:30:00 +08:00
(int)(i + kernel_callchain_nr + 1), entries[i].from);
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
}
}
static void callchain__printf(struct evsel *evsel,
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
struct perf_sample *sample)
{
unsigned int i;
struct ip_callchain *callchain = sample->callchain;
if (evsel__has_branch_callstack(evsel))
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
callchain__lbr_callstack_printf(sample);
printf("... FP chain: nr:%" PRIu64 "\n", callchain->nr);
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
for (i = 0; i < callchain->nr; i++)
printf("..... %2d: %016" PRIx64 "\n",
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
i, callchain->ips[i]);
perf: Generalize perf lock's sample event reordering to the session layer The sample events recorded by perf record are not time ordered because we have one buffer per cpu for each event (even demultiplexed per task/per cpu for task bound events). But when we read trace events we want them to be ordered by time because many state machines are involved. There are currently two ways perf tools deal with that: - use -M to multiplex every buffers (perf sched, perf kmem) But this creates a lot of contention in SMP machines on record time. - use a post-processing time reordering (perf timechart, perf lock) The reordering used by timechart is simple but doesn't scale well with huge flow of events, in terms of performance and memory use (unusable with perf lock for example). Perf lock has its own samples reordering that flushes its memory use in a regular basis and that uses a sorting based on the previous event queued (a new event to be queued is close to the previous one most of the time). This patch proposes to export perf lock's samples reordering facility to the session layer that reads the events. So if a tool wants to get ordered sample events, it needs to set its struct perf_event_ops::ordered_samples to true and that's it. This prepares tracing based perf tools to get rid of the need to use buffers multiplexing (-M) or to implement their own reordering. Also lower the flush period to 2 as it's sufficient already. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-04-24 06:04:12 +08:00
}
perf report: Dump LBR callstack data by -D jointly with thread stack Make perf report -D command print captured LBR callstack chain when it is collected together with raw thread stack data: 2752673087247083 0x5d10 [0x548]: PERF_RECORD_SAMPLE(IP, 0x4002): 5841/5841: 0x40121f period: 1543862 addr: 0 ... FP chain: nr:0 ... branch callstack: nr:3 ..... 0: 00000000004011d0 ..... 1: 00007f393c388411 ..... 2: 0000000000401098 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x34e7 .... BX 0x7fff5f6dd3c0 .... CX 0xffffffff .... DX 0x34e6 .... SI 0x7f393c5268d0 .... DI 0x0 .... BP 0x401260 .... SP 0x7fff5f6dd3c0 .... IP 0x40121f .... FLAGS 0x29f .... CS 0x33 .... SS 0x2b .... R8 0x7f393c526800 .... R9 0x7f393c525da0 .... R10 0xfffffffffffff70a .... R11 0x246 .... R12 0x401070 .... R13 0x7fff5f6ddcb0 .... R14 0x0 .... R15 0x0 ... ustack: size 1024, offset 0x130 . data_src: 0x5080021 ... thread: stack_test:5841 ...... dso: /root/abudanko/stacks/stack_test Committer testing: # perf record -g --call-graph dwarf,1024 -j stack,u ls > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.042 MB perf.data (10 samples) ] # Before: # perf report -D |& grep PERF_RECORD_SAMPLE -A28 | tail -29 67538909824483 0xa7a0 [0x560]: PERF_RECORD_SAMPLE(IP, 0x4002): 9721/9721: 0x7f441b2b1e20 period: 1376095 addr: 0 ... FP chain: nr:0 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x7f441b2b1000 .... BX 0x7f441b55b970 .... CX 0x7fff6e2db218 .... DX 0x7fff6e2db218 .... SI 0x7fff6e2db208 .... DI 0x1 .... BP 0x1 .... SP 0x7fff6e2db178 .... IP 0x7f441b2b1e20 .... FLAGS 0x20a .... CS 0x33 .... SS 0x2b .... R8 0x1 .... R9 0x7f441b371c18 .... R10 0x7f441b5a5f10 .... R11 0x202 .... R12 0x7fff6e2db208 .... R13 0x7fff6e2db218 .... R14 0x7f441b5a7150 .... R15 0x0 ... ustack: size 1024, offset 0x148 . data_src: 0x5080021 ... thread: ls:9721 ...... dso: /usr/lib64/libpthread-2.29.so 0xad00 [0x60]: event: 10 # After: # perf report -D |& grep PERF_RECORD_SAMPLE -A31 | tail -32 67538909824483 0xa7a0 [0x560]: PERF_RECORD_SAMPLE(IP, 0x4002): 9721/9721: 0x7f441b2b1e20 period: 1376095 addr: 0 ... FP chain: nr:0 ... branch callstack: nr:4 ..... 0: 00007f441b2b1e20 ..... 1: 00007f441b58af1a ..... 2: 00007f441b58b0e1 ..... 3: 00007f441b57c145 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x7f441b2b1000 .... BX 0x7f441b55b970 .... CX 0x7fff6e2db218 .... DX 0x7fff6e2db218 .... SI 0x7fff6e2db208 .... DI 0x1 .... BP 0x1 .... SP 0x7fff6e2db178 .... IP 0x7f441b2b1e20 .... FLAGS 0x20a .... CS 0x33 .... SS 0x2b .... R8 0x1 .... R9 0x7f441b371c18 .... R10 0x7f441b5a5f10 .... R11 0x202 .... R12 0x7fff6e2db208 .... R13 0x7fff6e2db218 .... R14 0x7f441b5a7150 .... R15 0x0 ... ustack: size 1024, offset 0x148 . data_src: 0x5080021 ... thread: ls:9721 ...... dso: /usr/lib64/libpthread-2.29.so # Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/aa82e5dd-def2-0ca8-a064-db9e2e8ad076@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-09 23:26:30 +08:00
static void branch_stack__printf(struct perf_sample *sample, bool callstack)
{
perf tools: Add hw_idx in struct branch_stack The low level index of raw branch records for the most recent branch can be recorded in a sample with PERF_SAMPLE_BRANCH_HW_INDEX branch_sample_type. Extend struct branch_stack to support it. However, if the PERF_SAMPLE_BRANCH_HW_INDEX is not applied, only nr and entries[] will be output by kernel. The pointer of entries[] could be wrong, since the output format is different with new struct branch_stack. Add a variable no_hw_idx in struct perf_sample to indicate whether the hw_idx is output. Add get_branch_entry() to return corresponding pointer of entries[0]. To make dummy branch sample consistent as new branch sample, add hw_idx in struct dummy_branch_stack for cs-etm and intel-pt. Apply the new struct branch_stack for synthetic events as well. Extend test case sample-parsing to support new struct branch_stack. Committer notes: Renamed get_branch_entries() to perf_sample__branch_entries() to have proper namespacing and pave the way for this to be moved to libperf, eventually. Add 'static' to that inline as it is in a header. Add 'hw_idx' to 'struct dummy_branch_stack' in cs-etm.c to fix the build on arm64. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200228163011.19358-2-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-29 00:30:00 +08:00
struct branch_entry *entries = perf_sample__branch_entries(sample);
uint64_t i;
perf report: Dump LBR callstack data by -D jointly with thread stack Make perf report -D command print captured LBR callstack chain when it is collected together with raw thread stack data: 2752673087247083 0x5d10 [0x548]: PERF_RECORD_SAMPLE(IP, 0x4002): 5841/5841: 0x40121f period: 1543862 addr: 0 ... FP chain: nr:0 ... branch callstack: nr:3 ..... 0: 00000000004011d0 ..... 1: 00007f393c388411 ..... 2: 0000000000401098 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x34e7 .... BX 0x7fff5f6dd3c0 .... CX 0xffffffff .... DX 0x34e6 .... SI 0x7f393c5268d0 .... DI 0x0 .... BP 0x401260 .... SP 0x7fff5f6dd3c0 .... IP 0x40121f .... FLAGS 0x29f .... CS 0x33 .... SS 0x2b .... R8 0x7f393c526800 .... R9 0x7f393c525da0 .... R10 0xfffffffffffff70a .... R11 0x246 .... R12 0x401070 .... R13 0x7fff5f6ddcb0 .... R14 0x0 .... R15 0x0 ... ustack: size 1024, offset 0x130 . data_src: 0x5080021 ... thread: stack_test:5841 ...... dso: /root/abudanko/stacks/stack_test Committer testing: # perf record -g --call-graph dwarf,1024 -j stack,u ls > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.042 MB perf.data (10 samples) ] # Before: # perf report -D |& grep PERF_RECORD_SAMPLE -A28 | tail -29 67538909824483 0xa7a0 [0x560]: PERF_RECORD_SAMPLE(IP, 0x4002): 9721/9721: 0x7f441b2b1e20 period: 1376095 addr: 0 ... FP chain: nr:0 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x7f441b2b1000 .... BX 0x7f441b55b970 .... CX 0x7fff6e2db218 .... DX 0x7fff6e2db218 .... SI 0x7fff6e2db208 .... DI 0x1 .... BP 0x1 .... SP 0x7fff6e2db178 .... IP 0x7f441b2b1e20 .... FLAGS 0x20a .... CS 0x33 .... SS 0x2b .... R8 0x1 .... R9 0x7f441b371c18 .... R10 0x7f441b5a5f10 .... R11 0x202 .... R12 0x7fff6e2db208 .... R13 0x7fff6e2db218 .... R14 0x7f441b5a7150 .... R15 0x0 ... ustack: size 1024, offset 0x148 . data_src: 0x5080021 ... thread: ls:9721 ...... dso: /usr/lib64/libpthread-2.29.so 0xad00 [0x60]: event: 10 # After: # perf report -D |& grep PERF_RECORD_SAMPLE -A31 | tail -32 67538909824483 0xa7a0 [0x560]: PERF_RECORD_SAMPLE(IP, 0x4002): 9721/9721: 0x7f441b2b1e20 period: 1376095 addr: 0 ... FP chain: nr:0 ... branch callstack: nr:4 ..... 0: 00007f441b2b1e20 ..... 1: 00007f441b58af1a ..... 2: 00007f441b58b0e1 ..... 3: 00007f441b57c145 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x7f441b2b1000 .... BX 0x7f441b55b970 .... CX 0x7fff6e2db218 .... DX 0x7fff6e2db218 .... SI 0x7fff6e2db208 .... DI 0x1 .... BP 0x1 .... SP 0x7fff6e2db178 .... IP 0x7f441b2b1e20 .... FLAGS 0x20a .... CS 0x33 .... SS 0x2b .... R8 0x1 .... R9 0x7f441b371c18 .... R10 0x7f441b5a5f10 .... R11 0x202 .... R12 0x7fff6e2db208 .... R13 0x7fff6e2db218 .... R14 0x7f441b5a7150 .... R15 0x0 ... ustack: size 1024, offset 0x148 . data_src: 0x5080021 ... thread: ls:9721 ...... dso: /usr/lib64/libpthread-2.29.so # Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/aa82e5dd-def2-0ca8-a064-db9e2e8ad076@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-09 23:26:30 +08:00
printf("%s: nr:%" PRIu64 "\n",
!callstack ? "... branch stack" : "... branch callstack",
sample->branch_stack->nr);
for (i = 0; i < sample->branch_stack->nr; i++) {
perf tools: Add hw_idx in struct branch_stack The low level index of raw branch records for the most recent branch can be recorded in a sample with PERF_SAMPLE_BRANCH_HW_INDEX branch_sample_type. Extend struct branch_stack to support it. However, if the PERF_SAMPLE_BRANCH_HW_INDEX is not applied, only nr and entries[] will be output by kernel. The pointer of entries[] could be wrong, since the output format is different with new struct branch_stack. Add a variable no_hw_idx in struct perf_sample to indicate whether the hw_idx is output. Add get_branch_entry() to return corresponding pointer of entries[0]. To make dummy branch sample consistent as new branch sample, add hw_idx in struct dummy_branch_stack for cs-etm and intel-pt. Apply the new struct branch_stack for synthetic events as well. Extend test case sample-parsing to support new struct branch_stack. Committer notes: Renamed get_branch_entries() to perf_sample__branch_entries() to have proper namespacing and pave the way for this to be moved to libperf, eventually. Add 'static' to that inline as it is in a header. Add 'hw_idx' to 'struct dummy_branch_stack' in cs-etm.c to fix the build on arm64. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pavel Gerasimov <pavel.gerasimov@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Vitaly Slobodskoy <vitaly.slobodskoy@intel.com> Link: http://lore.kernel.org/lkml/20200228163011.19358-2-kan.liang@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-29 00:30:00 +08:00
struct branch_entry *e = &entries[i];
perf report: Dump LBR callstack data by -D jointly with thread stack Make perf report -D command print captured LBR callstack chain when it is collected together with raw thread stack data: 2752673087247083 0x5d10 [0x548]: PERF_RECORD_SAMPLE(IP, 0x4002): 5841/5841: 0x40121f period: 1543862 addr: 0 ... FP chain: nr:0 ... branch callstack: nr:3 ..... 0: 00000000004011d0 ..... 1: 00007f393c388411 ..... 2: 0000000000401098 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x34e7 .... BX 0x7fff5f6dd3c0 .... CX 0xffffffff .... DX 0x34e6 .... SI 0x7f393c5268d0 .... DI 0x0 .... BP 0x401260 .... SP 0x7fff5f6dd3c0 .... IP 0x40121f .... FLAGS 0x29f .... CS 0x33 .... SS 0x2b .... R8 0x7f393c526800 .... R9 0x7f393c525da0 .... R10 0xfffffffffffff70a .... R11 0x246 .... R12 0x401070 .... R13 0x7fff5f6ddcb0 .... R14 0x0 .... R15 0x0 ... ustack: size 1024, offset 0x130 . data_src: 0x5080021 ... thread: stack_test:5841 ...... dso: /root/abudanko/stacks/stack_test Committer testing: # perf record -g --call-graph dwarf,1024 -j stack,u ls > /dev/null [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.042 MB perf.data (10 samples) ] # Before: # perf report -D |& grep PERF_RECORD_SAMPLE -A28 | tail -29 67538909824483 0xa7a0 [0x560]: PERF_RECORD_SAMPLE(IP, 0x4002): 9721/9721: 0x7f441b2b1e20 period: 1376095 addr: 0 ... FP chain: nr:0 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x7f441b2b1000 .... BX 0x7f441b55b970 .... CX 0x7fff6e2db218 .... DX 0x7fff6e2db218 .... SI 0x7fff6e2db208 .... DI 0x1 .... BP 0x1 .... SP 0x7fff6e2db178 .... IP 0x7f441b2b1e20 .... FLAGS 0x20a .... CS 0x33 .... SS 0x2b .... R8 0x1 .... R9 0x7f441b371c18 .... R10 0x7f441b5a5f10 .... R11 0x202 .... R12 0x7fff6e2db208 .... R13 0x7fff6e2db218 .... R14 0x7f441b5a7150 .... R15 0x0 ... ustack: size 1024, offset 0x148 . data_src: 0x5080021 ... thread: ls:9721 ...... dso: /usr/lib64/libpthread-2.29.so 0xad00 [0x60]: event: 10 # After: # perf report -D |& grep PERF_RECORD_SAMPLE -A31 | tail -32 67538909824483 0xa7a0 [0x560]: PERF_RECORD_SAMPLE(IP, 0x4002): 9721/9721: 0x7f441b2b1e20 period: 1376095 addr: 0 ... FP chain: nr:0 ... branch callstack: nr:4 ..... 0: 00007f441b2b1e20 ..... 1: 00007f441b58af1a ..... 2: 00007f441b58b0e1 ..... 3: 00007f441b57c145 ... user regs: mask 0xff0fff ABI 64-bit .... AX 0x7f441b2b1000 .... BX 0x7f441b55b970 .... CX 0x7fff6e2db218 .... DX 0x7fff6e2db218 .... SI 0x7fff6e2db208 .... DI 0x1 .... BP 0x1 .... SP 0x7fff6e2db178 .... IP 0x7f441b2b1e20 .... FLAGS 0x20a .... CS 0x33 .... SS 0x2b .... R8 0x1 .... R9 0x7f441b371c18 .... R10 0x7f441b5a5f10 .... R11 0x202 .... R12 0x7fff6e2db208 .... R13 0x7fff6e2db218 .... R14 0x7f441b5a7150 .... R15 0x0 ... ustack: size 1024, offset 0x148 . data_src: 0x5080021 ... thread: ls:9721 ...... dso: /usr/lib64/libpthread-2.29.so # Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/aa82e5dd-def2-0ca8-a064-db9e2e8ad076@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-09 23:26:30 +08:00
if (!callstack) {
printf("..... %2"PRIu64": %016" PRIx64 " -> %016" PRIx64 " %hu cycles %s%s%s%s %x\n",
i, e->from, e->to,
(unsigned short)e->flags.cycles,
e->flags.mispred ? "M" : " ",
e->flags.predicted ? "P" : " ",
e->flags.abort ? "A" : " ",
e->flags.in_tx ? "T" : " ",
(unsigned)e->flags.reserved);
} else {
printf("..... %2"PRIu64": %016" PRIx64 "\n",
i, i > 0 ? e->from : e->to);
}
}
}
static void regs_dump__printf(u64 mask, u64 *regs)
{
unsigned rid, i = 0;
for_each_set_bit(rid, (unsigned long *) &mask, sizeof(mask) * 8) {
u64 val = regs[i++];
perf script: Better align register values in dump Before: $ perf script --dump-raw-trace [...] 2492031077254920 0x1e08 [0x308]: PERF_RECORD_SAMPLE(IP, 0x1): 47557/47557: 0xc00000000012eeb0 period: 1 addr: 0 ... user regs: mask 0x1fffffffffff ABI 64-bit .... r0 0xb .... r1 0x7ffff3b90fa0 .... r2 0x7fffbabf7300 .... r3 0x7ffff3b9ed60 .... r4 0x7ffff3b95cc0 .... r5 0x1000c5a2940 .... r6 0xfefefefefefefeff .... r7 0x7f7f7f7f7f7f7f7f .... r8 0x7ffff3b9ed60 .... r9 0x0 [...] After: [...] 2492031077254920 0x1e08 [0x308]: PERF_RECORD_SAMPLE(IP, 0x1): 47557/47557: 0xc00000000012eeb0 period: 1 addr: 0 ... user regs: mask 0x1fffffffffff ABI 64-bit .... r0 0x000000000000000b .... r1 0x00007ffff3b90fa0 .... r2 0x00007fffbabf7300 .... r3 0x00007ffff3b9ed60 .... r4 0x00007ffff3b95cc0 .... r5 0x000001000c5a2940 .... r6 0xfefefefefefefeff .... r7 0x7f7f7f7f7f7f7f7f .... r8 0x00007ffff3b9ed60 .... r9 0x0000000000000000 [...] Committer testing: Full set of instructions, testing on x86_64: # perf record -I ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 2.855 MB perf.data (4902 samples) ] # perf evlist -v cycles: size: 120, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD|REGS_INTR, read_format: ID, disabled: 1, inherit: 1, freq: 1, precise_ip: 3, sample_id_all: 1, exclude_guest: 1, sample_regs_intr: 0xff0fff dummy:HG: type: 1, size: 120, config: 0x9, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|ID|CPU|PERIOD|REGS_INTR, read_format: ID, inherit: 1, mmap: 1, comm: 1, freq: 1, task: 1, sample_id_all: 1, mmap2: 1, comm_exec: 1, ksymbol: 1, bpf_event: 1, sample_regs_intr: 0xff0fff # Before: # perf script --dump-raw-trace [...] 0 1542674658099675 0x1cb700 [0xe0]: PERF_RECORD_SAMPLE(IP, 0x4001): 1825/1825: 0xffffffff9506e544 period: 1 addr: 0 ... intr regs: mask 0xff0fff ABI 64-bit .... AX 0xf .... BX 0xffff96e1064125a0 .... CX 0x38f .... DX 0x7 .... SI 0xf .... DI 0x38f .... BP 0x1 .... SP 0xfffffe000000bdf0 .... IP 0xffffffff9506e544 .... FLAGS 0xa .... CS 0x10 .... SS 0x18 .... R8 0x0 .... R9 0x0 .... R10 0xfffffe00000260c8 .... R11 0xfffffe000000bef8 .... R12 0x1 .... R13 0x64 .... R14 0x390 .... R15 0xffff96e1064125a0 ... thread: perf:1825 ...... dso: /proc/kcore perf 1825 [000] 1542674.658099: 1 cycles: ffffffff9506e544 native_write_msr+0x4 (vmlinux [...] After: # perf script --dump-raw-trace [...] 0 1542674658096068 0x1cb620 [0xe0]: PERF_RECORD_SAMPLE(IP, 0x4001): 1825/1825: 0xffffffff9506e544 period: 1 addr: 0 ... intr regs: mask 0xff0fff ABI 64-bit .... AX 0x000000000000000f .... BX 0xffff96e1064125a0 .... CX 0x000000000000038f .... DX 0x0000000000000007 .... SI 0x000000000000000f .... DI 0x000000000000038f .... BP 0x0000000000000000 .... SP 0xffffb3e788fb7c20 .... IP 0xffffffff9506e544 .... FLAGS 0x000000000000000a .... CS 0x0000000000000010 .... SS 0x0000000000000018 .... R8 0x00057b0deeffdfe3 .... R9 0xffff96e106432480 .... R10 0x0000000000000000 .... R11 0xffff96e106412cc0 .... R12 0xffffb3e788fb7d00 .... R13 0xffff96e106432408 .... R14 0xffff96e106432400 .... R15 0xffff96e0e09a4800 ... thread: perf:1825 ...... dso: /proc/kcore perf 1825 [000] 1542674.658096: 1 cycles: ffffffff9506e544 native_write_msr+0x4 (vmlinux) [...] Signed-off-by: Paul Clarke <pc@us.ibm.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> LPU-Reference: 1589911102-9460-1-git-send-email-pc@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-20 01:58:22 +08:00
printf(".... %-5s 0x%016" PRIx64 "\n",
perf_reg_name(rid), val);
}
}
static const char *regs_abi[] = {
[PERF_SAMPLE_REGS_ABI_NONE] = "none",
[PERF_SAMPLE_REGS_ABI_32] = "32-bit",
[PERF_SAMPLE_REGS_ABI_64] = "64-bit",
};
static inline const char *regs_dump_abi(struct regs_dump *d)
{
if (d->abi > PERF_SAMPLE_REGS_ABI_64)
return "unknown";
return regs_abi[d->abi];
}
static void regs__printf(const char *type, struct regs_dump *regs)
{
u64 mask = regs->mask;
printf("... %s regs: mask 0x%" PRIx64 " ABI %s\n",
type,
mask,
regs_dump_abi(regs));
regs_dump__printf(mask, regs->regs);
}
static void regs_user__printf(struct perf_sample *sample)
{
struct regs_dump *user_regs = &sample->user_regs;
if (user_regs->regs)
regs__printf("user", user_regs);
}
static void regs_intr__printf(struct perf_sample *sample)
{
struct regs_dump *intr_regs = &sample->intr_regs;
if (intr_regs->regs)
regs__printf("intr", intr_regs);
}
static void stack_user__printf(struct stack_dump *dump)
{
printf("... ustack: size %" PRIu64 ", offset 0x%x\n",
dump->size, dump->offset);
}
static void perf_evlist__print_tstamp(struct evlist *evlist,
union perf_event *event,
struct perf_sample *sample)
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 20:25:28 +08:00
{
u64 sample_type = __evlist__combined_sample_type(evlist);
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 20:25:28 +08:00
if (event->header.type != PERF_RECORD_SAMPLE &&
!evlist__sample_id_all(evlist)) {
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 20:25:28 +08:00
fputs("-1 -1 ", stdout);
return;
}
if ((sample_type & PERF_SAMPLE_CPU))
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 20:25:28 +08:00
printf("%u ", sample->cpu);
if (sample_type & PERF_SAMPLE_TIME)
printf("%" PRIu64 " ", sample->time);
perf tools: Ask for ID PERF_SAMPLE_ info on all PERF_RECORD_ events So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Ian Munsie <imunsie@au1.ibm.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-12-02 20:25:28 +08:00
}
static void sample_read__printf(struct perf_sample *sample, u64 read_format)
{
printf("... sample_read:\n");
if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
printf("...... time enabled %016" PRIx64 "\n",
sample->read.time_enabled);
if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
printf("...... time running %016" PRIx64 "\n",
sample->read.time_running);
if (read_format & PERF_FORMAT_GROUP) {
u64 i;
printf(".... group nr %" PRIu64 "\n", sample->read.group.nr);
for (i = 0; i < sample->read.group.nr; i++) {
struct sample_read_value *value;
value = &sample->read.group.values[i];
printf("..... id %016" PRIx64
", value %016" PRIx64 "\n",
value->id, value->value);
}
} else
printf("..... id %016" PRIx64 ", value %016" PRIx64 "\n",
sample->read.one.id, sample->read.one.value);
}
static void dump_event(struct evlist *evlist, union perf_event *event,
u64 file_offset, struct perf_sample *sample)
{
if (!dump_trace)
return;
printf("\n%#" PRIx64 " [%#x]: event: %d\n",
file_offset, event->header.size, event->header.type);
trace_event(event);
perf report: Display arch specific diagnostic counter sets, starting with s390 On s390 the event bc000 (also named CF_DIAG) extracts the CPU Measurement Facility diagnostic counter sets and displays them as counter number and counter value pairs sorted by counter set number. Output: [root@s35lp76 perf]# ./perf report -D --stdio [00000000] Counterset:0 Counters:6 Counter:000 Value:0x000000000085ec36 Counter:001 Value:0x0000000000796c94 Counter:002 Value:0x0000000000005ada Counter:003 Value:0x0000000000092460 Counter:004 Value:0x0000000000006073 Counter:005 Value:0x00000000001a9a73 [0x000038] Counterset:1 Counters:2 Counter:000 Value:0x000000000007c59f Counter:001 Value:0x000000000002fad6 [0x000050] Counterset:2 Counters:16 Counter:000 Value:000000000000000000 Counter:001 Value:000000000000000000 Counter:002 Value:000000000000000000 Counter:003 Value:000000000000000000 Counter:004 Value:000000000000000000 Counter:005 Value:000000000000000000 Counter:006 Value:000000000000000000 Counter:007 Value:000000000000000000 Counter:008 Value:000000000000000000 Counter:009 Value:000000000000000000 Counter:010 Value:000000000000000000 Counter:011 Value:000000000000000000 Counter:012 Value:000000000000000000 Counter:013 Value:000000000000000000 Counter:014 Value:000000000000000000 Counter:015 Value:000000000000000000 [0x0000d8] Counterset:3 Counters:128 Counter:000 Value:0x000000000000020f Counter:001 Value:0x00000000000001d8 Counter:002 Value:0x000000000000d7fa Counter:003 Value:0x000000000000008b ... The number in brackets is the offset into the raw data field of the sample. New functions trace_event_sample_raw__init() and s390_sample_raw() are introduced in the code path to enable interpretation on non s390 platforms. This event bc000 attached raw data is generated only on s390 platform. Correct display on other platforms requires correct endianness handling. Committer notes: Added a init function that sets up a evlist function pointer to avoid repeated tests on evlist->env and calls to perf_env__name() that involves normalizing, etc, for each PERF_RECORD_SAMPLE. Removed needless __maybe_unused from the trace_event_raw() prototype in session.h, move it to be an static function in evlist. The 'offset' variable is a size_t, not an u64, fix it to avoid this on some arches: CC /tmp/build/perf/util/s390-sample-raw.o util/s390-sample-raw.c: In function 's390_cpumcfdg_testctr': util/s390-sample-raw.c:77:4: error: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'size_t' [-Werror=format=] pr_err("Invalid counter set entry at %#" PRIx64 "\n", ^ cc1: all warnings being treated as errors Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Link: https://lkml.kernel.org/r/9c856ac0-ef23-72b5-901d-a1f815508976@linux.ibm.com Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Link: https://lkml.kernel.org/n/tip-s3jhif06et9ug78qhclw41z1@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-17 21:37:17 +08:00
if (event->header.type == PERF_RECORD_SAMPLE && evlist->trace_event_sample_raw)
evlist->trace_event_sample_raw(evlist, event, sample);
if (sample)
perf_evlist__print_tstamp(evlist, event, sample);
printf("%#" PRIx64 " [%#x]: PERF_RECORD_%s", file_offset,
event->header.size, perf_event__name(event->header.type));
}
static void dump_sample(struct evsel *evsel, union perf_event *event,
struct perf_sample *sample)
{
u64 sample_type;
if (!dump_trace)
return;
printf("(IP, 0x%x): %d/%d: %#" PRIx64 " period: %" PRIu64 " addr: %#" PRIx64 "\n",
event->header.misc, sample->pid, sample->tid, sample->ip,
sample->period, sample->addr);
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 19:24:29 +08:00
sample_type = evsel->core.attr.sample_type;
if (evsel__has_callchain(evsel))
perf tools: Construct LBR call chain LBR call stack only has user-space callchains. It is output in the PERF_SAMPLE_BRANCH_STACK data format. For kernel callchains, it's still in the form of PERF_SAMPLE_CALLCHAIN. The perf tool has to handle both data sources to construct a complete callstack. For the "perf report -D" option, both lbr and fp information will be displayed. A new call chain recording option "lbr" is introduced into the perf tool for LBR call stack. The user can use --call-graph lbr to get the call stack information from hardware. Here are some examples. When profiling bc(1) on Fedora 19: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph lbr bc -l < cmd If enabling LBR, perf report output looks like: 50.36% bc bc [.] bc_divide | --- bc_divide execute run_code yyparse main __libc_start_main _start 33.66% bc bc [.] _one_mult | --- _one_mult bc_divide execute run_code yyparse main __libc_start_main _start 7.62% bc bc [.] _bc_do_add | --- _bc_do_add | |--99.89%-- 0x2000186a8 --0.11%-- [...] 6.83% bc bc [.] _bc_do_sub | --- _bc_do_sub | |--99.94%-- bc_add | execute | run_code | yyparse | main | __libc_start_main | _start --0.06%-- [...] 0.46% bc libc-2.17.so [.] __memset_sse2 | --- __memset_sse2 | |--54.13%-- bc_new_num | | | |--51.00%-- bc_divide | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | |--30.46%-- _bc_do_sub | | bc_add | | execute | | run_code | | yyparse | | main | | __libc_start_main | | _start | | | --18.55%-- _bc_do_add | bc_add | execute | run_code | yyparse | main | __libc_start_main | _start | --45.87%-- bc_divide execute run_code yyparse main __libc_start_main _start If using FP, perf report output looks like: echo 'scale=2000; 4*a(1)' > cmd; perf record --call-graph fp bc -l < cmd 50.49% bc bc [.] bc_divide | --- bc_divide 33.57% bc bc [.] _one_mult | --- _one_mult 7.61% bc bc [.] _bc_do_add | --- _bc_do_add 0x2000186a8 6.88% bc bc [.] _bc_do_sub | --- _bc_do_sub 0.42% bc libc-2.17.so [.] __memcpy_ssse3_back | --- __memcpy_ssse3_back If using LBR, perf report -D output looks like: 3458145275743 0x2fd750 [0xd8]: PERF_RECORD_SAMPLE(IP, 0x2): 9748/9748: 0x408ea8 period: 609644 addr: 0 ... LBR call chain: nr:8 ..... 0: fffffffffffffe00 ..... 1: 0000000000408e50 ..... 2: 000000000040a458 ..... 3: 000000000040562e ..... 4: 0000000000408590 ..... 5: 00000000004022c0 ..... 6: 00000000004015dd ..... 7: 0000003d1cc21b43 ... FP chain: nr:2 ..... 0: fffffffffffffe00 ..... 1: 0000000000408ea8 ... thread: bc:9748 ...... dso: /usr/bin/bc The LBR call stack has the following known limitations: - Zero length calls are not filtered out by the hardware - Exception handing such as setjmp/longjmp will have calls/returns not match - Pushing different return address onto the stack will have calls/returns not match - If callstack is deeper than the LBR, only the last entries are captured Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1420482185-29830-3-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-01-06 02:23:05 +08:00
callchain__printf(evsel, sample);
if (evsel__has_br_stack(evsel))
branch_stack__printf(sample, evsel__has_branch_callstack(evsel));
if (sample_type & PERF_SAMPLE_REGS_USER)
regs_user__printf(sample);
if (sample_type & PERF_SAMPLE_REGS_INTR)
regs_intr__printf(sample);
if (sample_type & PERF_SAMPLE_STACK_USER)
stack_user__printf(&sample->user_stack);
if (sample_type & PERF_SAMPLE_WEIGHT)
printf("... weight: %" PRIu64 "\n", sample->weight);
if (sample_type & PERF_SAMPLE_DATA_SRC)
printf(" . data_src: 0x%"PRIx64"\n", sample->data_src);
if (sample_type & PERF_SAMPLE_PHYS_ADDR)
printf(" .. phys_addr: 0x%"PRIx64"\n", sample->phys_addr);
if (sample_type & PERF_SAMPLE_TRANSACTION)
printf("... transaction: %" PRIx64 "\n", sample->transaction);
if (sample_type & PERF_SAMPLE_READ)
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 19:24:29 +08:00
sample_read__printf(sample, evsel->core.attr.read_format);
}
static void dump_read(struct evsel *evsel, union perf_event *event)
{
struct perf_record_read *read_event = &event->read;
u64 read_format;
if (!dump_trace)
return;
printf(": %d %d %s %" PRI_lu64 "\n", event->read.pid, event->read.tid,
evsel__name(evsel), event->read.value);
perf session: Fix potential NULL pointer dereference found by the smatch tool Based on the following report from Smatch, fix the potential NULL pointer dereference check. tools/perf/util/session.c:1252 dump_read() error: we previously assumed 'evsel' could be null (see line 1249) tools/perf/util/session.c 1240 static void dump_read(struct perf_evsel *evsel, union perf_event *event) 1241 { 1242 struct read_event *read_event = &event->read; 1243 u64 read_format; 1244 1245 if (!dump_trace) 1246 return; 1247 1248 printf(": %d %d %s %" PRIu64 "\n", event->read.pid, event->read.tid, 1249 evsel ? perf_evsel__name(evsel) : "FAIL", 1250 event->read.value); 1251 1252 read_format = evsel->attr.read_format; ^^^^^^^ 'evsel' could be NULL pointer, for this case this patch directly bails out without dumping read_event. Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexios Zavras <alexios.zavras@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Changbin Du <changbin.du@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Eric Saint-Etienne <eric.saint.etienne@oracle.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Song Liu <songliubraving@fb.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/20190702103420.27540-9-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-02 18:34:17 +08:00
if (!evsel)
return;
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 19:24:29 +08:00
read_format = evsel->core.attr.read_format;
if (read_format & PERF_FORMAT_TOTAL_TIME_ENABLED)
printf("... time enabled : %" PRI_lu64 "\n", read_event->time_enabled);
if (read_format & PERF_FORMAT_TOTAL_TIME_RUNNING)
printf("... time running : %" PRI_lu64 "\n", read_event->time_running);
if (read_format & PERF_FORMAT_ID)
printf("... id : %" PRI_lu64 "\n", read_event->id);
}
static struct machine *machines__find_for_cpumode(struct machines *machines,
union perf_event *event,
struct perf_sample *sample)
{
perf kvm: Fix kvm report without guestmount. Currently, if we use perf kvm --guestkallsyms --guestmodules report, we can not get the perf information from perf data file. All sample are shown as unknown. Reproducing steps: # perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.624 MB perf.data.guest (~27260 samples) ] # perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules report |grep % 100.00% [guest/6471] [unknown] [g] 0xffffffff8164f330 This bug was introduced by 207b57926 (perf kvm: Fix regression with guest machine creation). In original code, it uses perf_session__find_machine(), it means we deliver symbol to machine which has the same pid, if no machine found, deliver it to *default* guest. But if we use perf_session__findnew_machine() here, if no machine was found, new machine with pid will be built and added. Then the default guest which with pid == 0 will never get a symbol. And because the new machine initialized here has no kernel map created, the symbol delivered to it will be marked as "unknown". This patch here is to revert commit 207b57926 and fix the SEGFAULT bug in another way. Verification steps: # ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.651 MB perf.data.guest (~28437 samples) ] # ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules report |grep % 22.64% :6471 [guest.kernel.kallsyms] [g] update_rq_clock.part.70 19.99% :6471 [guest.kernel.kallsyms] [g] d_free 18.46% :6471 [guest.kernel.kallsyms] [g] bio_phys_segments 16.25% :6471 [guest.kernel.kallsyms] [g] dequeue_task 12.78% :6471 [guest.kernel.kallsyms] [g] __switch_to 7.91% :6471 [guest.kernel.kallsyms] [g] scheduler_tick 1.75% :6471 [guest.kernel.kallsyms] [g] native_apic_mem_write 0.21% :6471 [guest.kernel.kallsyms] [g] apic_timer_interrupt Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: stable@vger.kernel.org # 3.3+ Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1387564907-3045-1-git-send-email-yangds.fnst@cn.fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-21 02:41:47 +08:00
struct machine *machine;
2012-07-21 07:25:48 +08:00
if (perf_guest &&
((sample->cpumode == PERF_RECORD_MISC_GUEST_KERNEL) ||
(sample->cpumode == PERF_RECORD_MISC_GUEST_USER))) {
u32 pid;
if (event->header.type == PERF_RECORD_MMAP
|| event->header.type == PERF_RECORD_MMAP2)
pid = event->mmap.pid;
else
pid = sample->pid;
machine = machines__find(machines, pid);
perf kvm: Fix kvm report without guestmount. Currently, if we use perf kvm --guestkallsyms --guestmodules report, we can not get the perf information from perf data file. All sample are shown as unknown. Reproducing steps: # perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.624 MB perf.data.guest (~27260 samples) ] # perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules report |grep % 100.00% [guest/6471] [unknown] [g] 0xffffffff8164f330 This bug was introduced by 207b57926 (perf kvm: Fix regression with guest machine creation). In original code, it uses perf_session__find_machine(), it means we deliver symbol to machine which has the same pid, if no machine found, deliver it to *default* guest. But if we use perf_session__findnew_machine() here, if no machine was found, new machine with pid will be built and added. Then the default guest which with pid == 0 will never get a symbol. And because the new machine initialized here has no kernel map created, the symbol delivered to it will be marked as "unknown". This patch here is to revert commit 207b57926 and fix the SEGFAULT bug in another way. Verification steps: # ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.651 MB perf.data.guest (~28437 samples) ] # ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules report |grep % 22.64% :6471 [guest.kernel.kallsyms] [g] update_rq_clock.part.70 19.99% :6471 [guest.kernel.kallsyms] [g] d_free 18.46% :6471 [guest.kernel.kallsyms] [g] bio_phys_segments 16.25% :6471 [guest.kernel.kallsyms] [g] dequeue_task 12.78% :6471 [guest.kernel.kallsyms] [g] __switch_to 7.91% :6471 [guest.kernel.kallsyms] [g] scheduler_tick 1.75% :6471 [guest.kernel.kallsyms] [g] native_apic_mem_write 0.21% :6471 [guest.kernel.kallsyms] [g] apic_timer_interrupt Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: stable@vger.kernel.org # 3.3+ Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1387564907-3045-1-git-send-email-yangds.fnst@cn.fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-21 02:41:47 +08:00
if (!machine)
perf kvm record/report: 'unprocessable sample' error while recording/reporting guest data While recording guest samples in host using perf kvm record, it will populate unprocessable sample error, though samples will be recorded properly. While generating report using perf kvm report, no samples will be processed and same error will populate. We have seen this behaviour with upstream perf(4.4-rc3) on x86 and ppc64 hardware. Reason behind this failure is, when it tries to fetch machine from rb_tree of machines, it fails. As a part of tracing a bug, we figured out that this code was incorrectly refactored in commit 54245fdc3576 ("perf session: Remove wrappers to machines__find"). This patch will change the functionality such that if it can't fetch machine in first trial, it will create one node of machine and add that to rb_tree. So next time when it tries to fetch same machine from rb_tree, it won't fail. Actually it was the case before refactoring of code in aforementioned commit. This patch is generated from acme perf/core branch. Below I've mention an example that demonstrate the behaviour before and after applying patch. Before applying patch: [Note: One needs to run guest before recording data in host] ravi@ravi-bangoria:~$ ./perf kvm record -a Warning: 5903 unprocessable samples recorded. Do you have a KVM guest running and not using 'perf kvm'? [ perf record: Captured and wrote 1.409 MB perf.data.guest (285 samples) ] ravi@ravi-bangoria:~$ ./perf kvm report --stdio Warning: 5903 unprocessable samples recorded. Do you have a KVM guest running and not using 'perf kvm'? # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 285 of event 'cycles' # Event count (approx.): 88715406 # # Overhead Command Shared Object Symbol # ........ ....... ............. ...... # # (For a higher level overview, try: perf report --sort comm,dso) # After applying patch: ravi@ravi-bangoria:~$ ./perf kvm record -a [ perf record: Captured and wrote 1.188 MB perf.data.guest (17 samples) ] ravi@ravi-bangoria:~$ ./perf kvm report --stdio # To display the perf.data header info, please use --header/--header-only options. # # Total Lost Samples: 0 # # Samples: 17 of event 'cycles' # Event count (approx.): 700746 # # Overhead Command Shared Object Symbol # ........ ....... ................ ...................... # 34.19% :5758 [unknown] [g] 0xffffffff818682ab 22.79% :5758 [unknown] [g] 0xffffffff812dc7f8 22.79% :5758 [unknown] [g] 0xffffffff818650d0 14.83% :5758 [unknown] [g] 0xffffffff8161a1b6 2.49% :5758 [unknown] [g] 0xffffffff818692bf 0.48% :5758 [unknown] [g] 0xffffffff81869253 0.05% :5758 [unknown] [g] 0xffffffff81869250 Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: stable@vger.kernel.org # v3.19+ Fixes: 54245fdc3576 ("perf session: Remove wrappers to machines__find") Link: http://lkml.kernel.org/r/1449471302-11283-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-07 14:55:02 +08:00
machine = machines__findnew(machines, DEFAULT_GUEST_KERNEL_ID);
perf kvm: Fix kvm report without guestmount. Currently, if we use perf kvm --guestkallsyms --guestmodules report, we can not get the perf information from perf data file. All sample are shown as unknown. Reproducing steps: # perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.624 MB perf.data.guest (~27260 samples) ] # perf kvm --guestkallsyms /tmp/kallsyms --guestmodules /tmp/modules report |grep % 100.00% [guest/6471] [unknown] [g] 0xffffffff8164f330 This bug was introduced by 207b57926 (perf kvm: Fix regression with guest machine creation). In original code, it uses perf_session__find_machine(), it means we deliver symbol to machine which has the same pid, if no machine found, deliver it to *default* guest. But if we use perf_session__findnew_machine() here, if no machine was found, new machine with pid will be built and added. Then the default guest which with pid == 0 will never get a symbol. And because the new machine initialized here has no kernel map created, the symbol delivered to it will be marked as "unknown". This patch here is to revert commit 207b57926 and fix the SEGFAULT bug in another way. Verification steps: # ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules record -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.651 MB perf.data.guest (~28437 samples) ] # ./perf kvm --guestkallsyms /home/kallsyms --guestmodules /home/modules report |grep % 22.64% :6471 [guest.kernel.kallsyms] [g] update_rq_clock.part.70 19.99% :6471 [guest.kernel.kallsyms] [g] d_free 18.46% :6471 [guest.kernel.kallsyms] [g] bio_phys_segments 16.25% :6471 [guest.kernel.kallsyms] [g] dequeue_task 12.78% :6471 [guest.kernel.kallsyms] [g] __switch_to 7.91% :6471 [guest.kernel.kallsyms] [g] scheduler_tick 1.75% :6471 [guest.kernel.kallsyms] [g] native_apic_mem_write 0.21% :6471 [guest.kernel.kallsyms] [g] apic_timer_interrupt Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Acked-by: David Ahern <dsahern@gmail.com> Cc: stable@vger.kernel.org # 3.3+ Cc: David Ahern <dsahern@gmail.com> Link: http://lkml.kernel.org/r/1387564907-3045-1-git-send-email-yangds.fnst@cn.fujitsu.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-21 02:41:47 +08:00
return machine;
}
return &machines->host;
}
static int deliver_sample_value(struct evlist *evlist,
struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct sample_read_value *v,
struct machine *machine)
{
struct perf_sample_id *sid = perf_evlist__id2sid(evlist, v->id);
struct evsel *evsel;
if (sid) {
sample->id = v->id;
sample->period = v->value - sid->period;
sid->period = v->value;
}
if (!sid || sid->evsel == NULL) {
++evlist->stats.nr_unknown_id;
return 0;
}
/*
* There's no reason to deliver sample
* for zero period, bail out.
*/
if (!sample->period)
return 0;
evsel = container_of(sid->evsel, struct evsel, core);
return tool->sample(tool, event, sample, evsel, machine);
}
static int deliver_sample_group(struct evlist *evlist,
struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct machine *machine)
{
int ret = -EINVAL;
u64 i;
for (i = 0; i < sample->read.group.nr; i++) {
ret = deliver_sample_value(evlist, tool, event, sample,
&sample->read.group.values[i],
machine);
if (ret)
break;
}
return ret;
}
static int
perf_evlist__deliver_sample(struct evlist *evlist,
struct perf_tool *tool,
union perf_event *event,
struct perf_sample *sample,
struct evsel *evsel,
struct machine *machine)
{
/* We know evsel != NULL. */
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 19:24:29 +08:00
u64 sample_type = evsel->core.attr.sample_type;
u64 read_format = evsel->core.attr.read_format;
/* Standard sample delivery. */
if (!(sample_type & PERF_SAMPLE_READ))
return tool->sample(tool, event, sample, evsel, machine);
/* For PERF_SAMPLE_READ we have either single or group mode. */
if (read_format & PERF_FORMAT_GROUP)
return deliver_sample_group(evlist, tool, event, sample,
machine);
else
return deliver_sample_value(evlist, tool, event, sample,
&sample->read.one, machine);
}
static int machines__deliver_event(struct machines *machines,
struct evlist *evlist,
union perf_event *event,
struct perf_sample *sample,
struct perf_tool *tool, u64 file_offset)
{
struct evsel *evsel;
struct machine *machine;
dump_event(evlist, event, file_offset, sample);
evsel = perf_evlist__id2evsel(evlist, sample->id);
machine = machines__find_for_cpumode(machines, event, sample);
switch (event->header.type) {
case PERF_RECORD_SAMPLE:
if (evsel == NULL) {
++evlist->stats.nr_unknown_id;
return 0;
}
dump_sample(evsel, event, sample);
if (machine == NULL) {
++evlist->stats.nr_unprocessable_samples;
return 0;
}
return perf_evlist__deliver_sample(evlist, tool, event, sample, evsel, machine);
case PERF_RECORD_MMAP:
return tool->mmap(tool, event, sample, machine);
case PERF_RECORD_MMAP2:
if (event->header.misc & PERF_RECORD_MISC_PROC_MAP_PARSE_TIMEOUT)
++evlist->stats.nr_proc_map_timeout;
return tool->mmap2(tool, event, sample, machine);
case PERF_RECORD_COMM:
return tool->comm(tool, event, sample, machine);
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
case PERF_RECORD_NAMESPACES:
return tool->namespaces(tool, event, sample, machine);
case PERF_RECORD_CGROUP:
return tool->cgroup(tool, event, sample, machine);
case PERF_RECORD_FORK:
return tool->fork(tool, event, sample, machine);
case PERF_RECORD_EXIT:
return tool->exit(tool, event, sample, machine);
case PERF_RECORD_LOST:
if (tool->lost == perf_event__process_lost)
evlist->stats.total_lost += event->lost.lost;
return tool->lost(tool, event, sample, machine);
perf tools: handle PERF_RECORD_LOST_SAMPLES This patch modifies the perf tool to handle the new RECORD type, PERF_RECORD_LOST_SAMPLES. The number of lost-sample events is stored in .nr_events[PERF_RECORD_LOST_SAMPLES]. The exact number of samples which the kernel dropped is stored in total_lost_samples. When the percentage of dropped samples is greater than 5%, a warning is printed. Here are some examples: Eg 1, Recording different frequently-occurring events is safe with the patch. Only a very low drop rate is associated with such actions. $ perf record -e '{cycles:p,instructions:p}' -c 20003 --no-time ~/tchain ~/tchain $ perf report -D | tail SAMPLE events: 120243 MMAP2 events: 5 LOST_SAMPLES events: 24 FINISHED_ROUND events: 15 cycles:p stats: TOTAL events: 59348 SAMPLE events: 59348 instructions:p stats: TOTAL events: 60895 SAMPLE events: 60895 $ perf report --stdio --group # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 24 # # Samples: 120K of event 'anon group { cycles:p, instructions:p }' # Event count (approx.): 24048600000 # # Overhead Command Shared Object Symbol # ................ ........... ................ .................................. # 99.74% 99.86% tchain_edit tchain_edit [.] f3 0.09% 0.02% tchain_edit tchain_edit [.] f2 0.04% 0.00% tchain_edit [kernel.vmlinux] [k] ixgbe_read_reg Eg 2, Recording the same thing multiple times can lead to high drop rate, but it is not a useful configuration. $ perf record -e '{cycles:p,cycles:p}' -c 20003 --no-time ~/tchain Warning: Processed 600592 samples and lost 99.73% samples! [perf record: Woken up 148 times to write data] [perf record: Captured and wrote 36.922 MB perf.data (1206322 samples)] [perf record: Woken up 1 times to write data] [perf record: Captured and wrote 0.121 MB perf.data (1629 samples)] Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1431285195-14269-9-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 03:13:15 +08:00
case PERF_RECORD_LOST_SAMPLES:
if (tool->lost_samples == perf_event__process_lost_samples)
evlist->stats.total_lost_samples += event->lost_samples.lost;
return tool->lost_samples(tool, event, sample, machine);
case PERF_RECORD_READ:
dump_read(evsel, event);
return tool->read(tool, event, sample, evsel, machine);
case PERF_RECORD_THROTTLE:
return tool->throttle(tool, event, sample, machine);
case PERF_RECORD_UNTHROTTLE:
return tool->unthrottle(tool, event, sample, machine);
case PERF_RECORD_AUX:
if (tool->aux == perf_event__process_aux) {
if (event->aux.flags & PERF_AUX_FLAG_TRUNCATED)
evlist->stats.total_aux_lost += 1;
if (event->aux.flags & PERF_AUX_FLAG_PARTIAL)
evlist->stats.total_aux_partial += 1;
}
return tool->aux(tool, event, sample, machine);
case PERF_RECORD_ITRACE_START:
return tool->itrace_start(tool, event, sample, machine);
case PERF_RECORD_SWITCH:
case PERF_RECORD_SWITCH_CPU_WIDE:
return tool->context_switch(tool, event, sample, machine);
case PERF_RECORD_KSYMBOL:
return tool->ksymbol(tool, event, sample, machine);
perf tools: Handle PERF_RECORD_BPF_EVENT This patch adds basic handling of PERF_RECORD_BPF_EVENT. Tracking of PERF_RECORD_BPF_EVENT is OFF by default. Option --bpf-event is added to turn it on. Committer notes: Add dummy machine__process_bpf_event() variant that returns zero for systems without HAVE_LIBBPF_SUPPORT, such as Alpine Linux, unbreaking the build in such systems. Remove the needless include <machine.h> from bpf->event.h, provide just forward declarations for the structs and unions in the parameters, to reduce compilation time and needless rebuilds when machine.h gets changed. Committer testing: When running with: # perf record --bpf-event On an older kernel where PERF_RECORD_BPF_EVENT and PERF_RECORD_KSYMBOL is not present, we fallback to removing those two bits from perf_event_attr, making the tool to continue to work on older kernels: perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|PERIOD read_format ID disabled 1 inherit 1 mmap 1 comm 1 freq 1 enable_on_exec 1 task 1 precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 bpf_event 1 ------------------------------------------------------------ sys_perf_event_open: pid 5779 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -22 switching off bpf_event ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|PERIOD read_format ID disabled 1 inherit 1 mmap 1 comm 1 freq 1 enable_on_exec 1 task 1 precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ksymbol 1 ------------------------------------------------------------ sys_perf_event_open: pid 5779 cpu 0 group_fd -1 flags 0x8 sys_perf_event_open failed, error -22 switching off ksymbol ------------------------------------------------------------ perf_event_attr: size 112 { sample_period, sample_freq } 4000 sample_type IP|TID|TIME|PERIOD read_format ID disabled 1 inherit 1 mmap 1 comm 1 freq 1 enable_on_exec 1 task 1 precise_ip 3 sample_id_all 1 exclude_guest 1 mmap2 1 comm_exec 1 ------------------------------------------------------------ And then proceeds to work without those two features. As passing --bpf-event is an explicit action performed by the user, perhaps we should emit a warning telling that the kernel has no such feature, but this can be done on top of this patch. Now with a kernel that supports these events, start the 'record --bpf-event -a' and then run 'perf trace sleep 10000' that will use the BPF augmented_raw_syscalls.o prebuilt (for another kernel version even) and thus should generate PERF_RECORD_BPF_EVENT events: [root@quaco ~]# perf record -e dummy -a --bpf-event ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.713 MB perf.data ] [root@quaco ~]# bpftool prog 13: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 13,14 14: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 13,14 15: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 15,16 16: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:43-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 15,16 17: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:44-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 17,18 18: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:44-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 17,18 21: cgroup_skb tag 7be49e3934a125ba gpl loaded_at 2019-01-19T09:09:45-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 21,22 22: cgroup_skb tag 2a142ef67aaad174 gpl loaded_at 2019-01-19T09:09:45-0300 uid 0 xlated 296B jited 229B memlock 4096B map_ids 21,22 31: tracepoint name sys_enter tag 12504ba9402f952f gpl loaded_at 2019-01-19T09:19:56-0300 uid 0 xlated 512B jited 374B memlock 4096B map_ids 30,29,28 32: tracepoint name sys_exit tag c1bd85c092d6e4aa gpl loaded_at 2019-01-19T09:19:56-0300 uid 0 xlated 256B jited 191B memlock 4096B map_ids 30,29 # perf report -D | grep PERF_RECORD_BPF_EVENT | nl 1 0 55834574849 0x4fc8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 13 2 0 60129542145 0x5118 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 14 3 0 64424509441 0x5268 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 15 4 0 68719476737 0x53b8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 16 5 0 73014444033 0x5508 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 17 6 0 77309411329 0x5658 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 18 7 0 90194313217 0x57a8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 21 8 0 94489280513 0x58f8 [0x18]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 22 9 7 620922484360 0xb6390 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 29 10 7 620922486018 0xb6410 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 2, flags 0, id 29 11 7 620922579199 0xb6490 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 30 12 7 620922580240 0xb6510 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 2, flags 0, id 30 13 7 620922765207 0xb6598 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 31 14 7 620922874543 0xb6620 [0x30]: PERF_RECORD_BPF_EVENT bpf event with type 1, flags 0, id 32 # There, the 31 and 32 tracepoint BPF programs put in place by 'perf trace'. Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-team@fb.com Cc: netdev@vger.kernel.org Link: http://lkml.kernel.org/r/20190117161521.1341602-7-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-01-18 00:15:18 +08:00
case PERF_RECORD_BPF_EVENT:
return tool->bpf(tool, event, sample, machine);
case PERF_RECORD_TEXT_POKE:
return tool->text_poke(tool, event, sample, machine);
default:
++evlist->stats.nr_unknown_events;
return -1;
}
}
static int perf_session__deliver_event(struct perf_session *session,
union perf_event *event,
struct perf_tool *tool,
u64 file_offset)
{
perf tools: Optimize sample parsing for ordered events Currently when using ordered events we parse the sample twice (the perf_evlist__parse_sample function). Once before we queue the sample for sorting: perf_session__process_event perf_evlist__parse_sample(sample) perf_session__queue_event(sample.time) And then when we deliver the sorted sample: ordered_events__deliver_event perf_evlist__parse_sample perf_session__deliver_event We can skip the initial full sample parsing by using perf_evlist__parse_sample_timestamp function, which got introduced earlier. The new path looks like: perf_session__process_event perf_evlist__parse_sample_timestamp perf_session__queue_event ordered_events__deliver_event perf_session__deliver_event perf_evlist__parse_sample It saves some instructions and is slightly faster: Before: Performance counter stats for './perf.old report --stdio' (5 runs): 64,396,007,225 cycles:u ( +- 0.97% ) 105,882,112,735 instructions:u # 1.64 insn per cycle ( +- 0.00% ) 21.618103465 seconds time elapsed ( +- 1.12% ) After: Performance counter stats for './perf report --stdio' (5 runs): 60,567,807,182 cycles:u ( +- 0.40% ) 104,853,333,514 instructions:u # 1.73 insn per cycle ( +- 0.00% ) 20.168895243 seconds time elapsed ( +- 0.32% ) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-cjp2tuk0qkjs9dxzlpmm34ua@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 19:21:14 +08:00
struct perf_sample sample;
int ret;
perf tools: Optimize sample parsing for ordered events Currently when using ordered events we parse the sample twice (the perf_evlist__parse_sample function). Once before we queue the sample for sorting: perf_session__process_event perf_evlist__parse_sample(sample) perf_session__queue_event(sample.time) And then when we deliver the sorted sample: ordered_events__deliver_event perf_evlist__parse_sample perf_session__deliver_event We can skip the initial full sample parsing by using perf_evlist__parse_sample_timestamp function, which got introduced earlier. The new path looks like: perf_session__process_event perf_evlist__parse_sample_timestamp perf_session__queue_event ordered_events__deliver_event perf_session__deliver_event perf_evlist__parse_sample It saves some instructions and is slightly faster: Before: Performance counter stats for './perf.old report --stdio' (5 runs): 64,396,007,225 cycles:u ( +- 0.97% ) 105,882,112,735 instructions:u # 1.64 insn per cycle ( +- 0.00% ) 21.618103465 seconds time elapsed ( +- 1.12% ) After: Performance counter stats for './perf report --stdio' (5 runs): 60,567,807,182 cycles:u ( +- 0.40% ) 104,853,333,514 instructions:u # 1.73 insn per cycle ( +- 0.00% ) 20.168895243 seconds time elapsed ( +- 0.32% ) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-cjp2tuk0qkjs9dxzlpmm34ua@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 19:21:14 +08:00
ret = perf_evlist__parse_sample(session->evlist, event, &sample);
if (ret) {
pr_err("Can't parse sample, err = %d\n", ret);
return ret;
}
ret = auxtrace__process_event(session, event, &sample, tool);
if (ret < 0)
return ret;
if (ret > 0)
return 0;
ret = machines__deliver_event(&session->machines, session->evlist,
event, &sample, tool, file_offset);
if (dump_trace && sample.aux_sample.size)
auxtrace__dump_auxtrace_sample(session, &sample);
return ret;
}
static s64 perf_session__process_user_event(struct perf_session *session,
union perf_event *event,
u64 file_offset)
{
struct ordered_events *oe = &session->ordered_events;
struct perf_tool *tool = session->tool;
perf report: Fix -D output for user metadata events The PERF_RECORD_USER_ events are synthesized by the tool to assist in processing the PERF_RECORD_ ones generated by the kernel, the printing of that information doesn't come with a perf_sample structure, so, when dumping the event fields using 'perf report -D' there were columns that end up not being printed. To tidy up a bit this, fake a perf_sample structure with zeroes to have the missing columns printed and avoid the occasional surprise with that. Before: 0 0x45b8 [0x68]: PERF_RECORD_MMAP -1/0: [0xffffffffc12ec000(0x4000) @ 0]: x /lib/modules/4.14.0+/kernel/fs/nls/nls_utf8.ko 0x4620 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 27820 0x4648 [0x18]: PERF_RECORD_CPU_MAP: 0-3 0 0x4660 [0x28]: PERF_RECORD_COMM: perf:27820/27820 0x4a58 [0x8]: PERF_RECORD_FINISHED_ROUND 447723433020976 0x4688 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4001): 27820/27820: 0xffffffff8f1b6d7a period: 1 addr: 0 After: $ perf report -D | grep PERF_RECORD_ | head 0 0xe8 [0x20]: PERF_RECORD_TIME_CONV: unhandled! 0 0x108 [0x28]: PERF_RECORD_THREAD_MAP nr: 1 thread: 32555 0 0x130 [0x18]: PERF_RECORD_CPU_MAP: 0-3 0 0x148 [0x28]: PERF_RECORD_COMM: perf:32555/32555 0 0x4e8 [0x8]: PERF_RECORD_FINISHED_ROUND 448743409421205 0x170 [0x28]: PERF_RECORD_COMM exec: sleep:32555/32555 448743409431883 0x198 [0x68]: PERF_RECORD_MMAP2 32555/32555: [0x55e11d75a000(0x208000) @ 0 fd:00 3147174 2566255743]: r-xp /usr/bin/sleep 448743409443873 0x200 [0x70]: PERF_RECORD_MMAP2 32555/32555: [0x7f0ced316000(0x229000) @ 0 fd:00 3151761 2566238119]: r-xp /usr/lib64/ld-2.25.so 448743409454790 0x270 [0x60]: PERF_RECORD_MMAP2 32555/32555: [0x7ffe84f6d000(0x2000) @ 0 00:00 0 0]: r-xp [vdso] 448743409479500 0x2d0 [0x28]: PERF_RECORD_SAMPLE(IP, 0x4002): 32555/32555: 0xffffffff8f84c7e7 period: 1 addr: 0 $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 9aefcab0de47 ("perf session: Consolidate the dump code") Link: https://lkml.kernel.org/n/tip-todcu15x0cwgppkh1gi6uhru@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-11-24 02:35:04 +08:00
struct perf_sample sample = { .time = 0, };
int fd = perf_data__fd(session->data);
int err;
if (event->header.type != PERF_RECORD_COMPRESSED ||
tool->compressed == perf_session__process_compressed_event_stub)
dump_event(session->evlist, event, file_offset, &sample);
/* These events are processed right away */
switch (event->header.type) {
case PERF_RECORD_HEADER_ATTR:
err = tool->attr(tool, event, &session->evlist);
if (err == 0) {
perf_session__set_id_hdr_size(session);
perf_session__set_comm_exec(session);
}
return err;
case PERF_RECORD_EVENT_UPDATE:
return tool->event_update(tool, event, &session->evlist);
case PERF_RECORD_HEADER_EVENT_TYPE:
/*
* Depreceated, but we need to handle it for sake
* of old data files create in pipe mode.
*/
return 0;
case PERF_RECORD_HEADER_TRACING_DATA:
/*
* Setup for reading amidst mmap, but only when we
* are in 'file' mode. The 'pipe' fd is in proper
* place already.
*/
if (!perf_data__is_pipe(session->data))
lseek(fd, file_offset, SEEK_SET);
return tool->tracing_data(session, event);
case PERF_RECORD_HEADER_BUILD_ID:
return tool->build_id(session, event);
perf: Provide a new deterministic events reordering algorithm The current events reordering algorithm is based on a heuristic that gets broken once we deal with a very fast flow of events. Indeed the time period based flushing is not suitable anymore in the following case, assuming we have a flush period of two seconds. CPU 0 | CPU 1 | cnt1 timestamps | cnt1 timestamps | 0 | 0 1 | 1 2 | 2 3 | 3 [...] | [...] 4 seconds later If we spend too much time to read the buffers (case of a lot of events to record in each buffers or when we have a lot of CPU buffers to read), in the next pass the CPU 0 buffer could contain a slice of several seconds of events. We'll read them all and notice we've reached the period to flush. In the above example we flush the first half of the CPU 0 buffer, then we read the CPU 1 buffer where we have events that were on the flush slice and then the reordering fails. It's simple to reproduce with: perf lock record perf bench sched messaging To solve this, we use a new solution that doesn't rely on an heuristical time slice period anymore but on a deterministic basis based on how perf record does its job. perf record saves the buffers through passes. A pass is a tour on every buffers from every CPUs. This is made in order: for each CPU we read the buffers of every counters. So the more buffers we visit, the later will be the timstamps of their events. When perf record finishes a pass it records a PERF_RECORD_FINISHED_ROUND pseudo event. We record the max timestamp t found in the pass n. Assuming these timestamps are monotonic across cpus, we know that if a buffer still has events with timestamps below t, they will be all available and then read in the pass n + 1. Hence when we start to read the pass n + 2, we can safely flush every events with timestamps below t. ============ PASS n ================= CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 1 | 2 2 | 3 - | 4 <--- max recorded ============ PASS n + 1 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 3 | 5 4 | 6 5 | 7 <---- max recorded Flush every events below timestamp 4 ============ PASS n + 2 ============== CPU 0 | CPU 1 | cnt1 timestamps | cnt2 timestamps 6 | 8 7 | 9 - | 10 Flush every events below timestamp 7 etc... It also works on perf.data versions that don't have PERF_RECORD_FINISHED_ROUND pseudo events. The difference is that the events will be only flushed in the end of the perf.data processing. It will then consume more memory and scale less with large perf.data files. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Masami Hiramatsu <mhiramat@redhat.com>
2010-05-03 21:14:33 +08:00
case PERF_RECORD_FINISHED_ROUND:
return tool->finished_round(tool, event, oe);
perf tools: Add id index Add an index of the event identifiers, in preparation for Intel PT. The event id (also called the sample id) is a unique number allocated by the kernel to the event created by perf_event_open(). Events can include the event id by having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER. Currently the main use of the event id is to match an event back to the evsel to which it belongs i.e. perf_evlist__id2evsel() The purpose of this patch is to make it possible to match an event back to the mmap from which it was read. The reason that is useful is because the mmap represents a time-ordered context (either for a cpu or for a thread). Intel PT decodes trace information on that basis. In full-trace mode, that information can be recorded when the Intel PT trace is read, but in sample-mode the Intel PT trace data is embedded in a sample and it is in that case that the "id index" is needed. So the mmaps are numbered (idx) and the cpu and tid recorded against the id by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel(). That information is recorded on the perf.data file in the new "id index". idx, cpu and tid are added to struct perf_sample_id (which is the node of evlist's hash table to match ids to evsels). The information can be retrieved using perf_evlist__id2sid(). Note however this all depends on having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER, otherwise ids are not recorded. The "id index" is a synthesized event record which will be created when Intel PT sampling is used by calling perf_event__synthesize_id_index(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1414417770-18602-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-27 21:49:22 +08:00
case PERF_RECORD_ID_INDEX:
return tool->id_index(session, event);
case PERF_RECORD_AUXTRACE_INFO:
return tool->auxtrace_info(session, event);
case PERF_RECORD_AUXTRACE:
/* setup for reading amidst mmap */
lseek(fd, file_offset + event->header.size, SEEK_SET);
return tool->auxtrace(session, event);
case PERF_RECORD_AUXTRACE_ERROR:
perf_session__auxtrace_error_inc(session, event);
return tool->auxtrace_error(session, event);
case PERF_RECORD_THREAD_MAP:
return tool->thread_map(session, event);
case PERF_RECORD_CPU_MAP:
return tool->cpu_map(session, event);
case PERF_RECORD_STAT_CONFIG:
return tool->stat_config(session, event);
case PERF_RECORD_STAT:
return tool->stat(session, event);
case PERF_RECORD_STAT_ROUND:
return tool->stat_round(session, event);
case PERF_RECORD_TIME_CONV:
session->time_conv = event->time_conv;
return tool->time_conv(session, event);
perf tools: Add feature header record to pipe-mode Add header record types to pipe-mode, reusing the functions used in file-mode and leveraging the new struct feat_fd. For alignment, check that synthesized events don't exceed pagesize. Add the perf_event__synthesize_feature event call back to process the new header records. Before this patch: $ perf record -o - -e cycles sleep 1 | perf report --stdio --header [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] ... After this patch: $ perf record -o - -e cycles sleep 1 | perf report --stdio --header # ======== # captured on: Mon May 22 16:33:43 2017 # ======== # # hostname : my_hostname # os release : 4.11.0-dbx-up_perf # perf version : 4.11.rc6.g6277c80 # arch : x86_64 # nrcpus online : 72 # nrcpus avail : 72 # cpudesc : Intel(R) Xeon(R) CPU E5-2696 v3 @ 2.30GHz # cpuid : GenuineIntel,6,63,2 # total memory : 263457192 kB # cmdline : /root/perf record -o - -e cycles -c 100000 sleep 1 # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # pmu mappings: intel_bts = 6, uncore_imc_4 = 22, uncore_sbox_1 = 47, uncore_cbox_5 = 33, uncore_ha_0 = 16, uncore_cbox [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] ... Support added for the subcommands: report, inject, annotate and script. Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Acked-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170718042549.145161-16-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-07-18 12:25:48 +08:00
case PERF_RECORD_HEADER_FEATURE:
return tool->feature(session, event);
case PERF_RECORD_COMPRESSED:
err = tool->compressed(session, event, file_offset);
if (err)
dump_event(session->evlist, event, file_offset, &sample);
return err;
default:
return -EINVAL;
}
}
int perf_session__deliver_synth_event(struct perf_session *session,
union perf_event *event,
struct perf_sample *sample)
{
struct evlist *evlist = session->evlist;
struct perf_tool *tool = session->tool;
events_stats__inc(&evlist->stats, event->header.type);
if (event->header.type >= PERF_RECORD_USER_TYPE_START)
return perf_session__process_user_event(session, event, 0);
return machines__deliver_event(&session->machines, evlist, event, sample, tool, 0);
}
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
static void event_swap(union perf_event *event, bool sample_id_all)
{
perf_event__swap_op swap;
swap = perf_event__swap_ops[event->header.type];
if (swap)
swap(event, sample_id_all);
}
int perf_session__peek_event(struct perf_session *session, off_t file_offset,
void *buf, size_t buf_sz,
union perf_event **event_ptr,
struct perf_sample *sample)
{
union perf_event *event;
size_t hdr_sz, rest;
int fd;
if (session->one_mmap && !session->header.needs_swap) {
event = file_offset - session->one_mmap_offset +
session->one_mmap_addr;
goto out_parse_sample;
}
if (perf_data__is_pipe(session->data))
return -1;
fd = perf_data__fd(session->data);
hdr_sz = sizeof(struct perf_event_header);
if (buf_sz < hdr_sz)
return -1;
if (lseek(fd, file_offset, SEEK_SET) == (off_t)-1 ||
readn(fd, buf, hdr_sz) != (ssize_t)hdr_sz)
return -1;
event = (union perf_event *)buf;
if (session->header.needs_swap)
perf_event_header__bswap(&event->header);
if (event->header.size < hdr_sz || event->header.size > buf_sz)
return -1;
rest = event->header.size - hdr_sz;
if (readn(fd, buf, rest) != (ssize_t)rest)
return -1;
if (session->header.needs_swap)
event_swap(event, evlist__sample_id_all(session->evlist));
out_parse_sample:
if (sample && event->header.type < PERF_RECORD_USER_TYPE_START &&
perf_evlist__parse_sample(session->evlist, event, sample))
return -1;
*event_ptr = event;
return 0;
}
int perf_session__peek_events(struct perf_session *session, u64 offset,
u64 size, peek_events_cb_t cb, void *data)
{
u64 max_offset = offset + size;
char buf[PERF_SAMPLE_MAX_SIZE];
union perf_event *event;
int err;
do {
err = perf_session__peek_event(session, offset, buf,
PERF_SAMPLE_MAX_SIZE, &event,
NULL);
if (err)
return err;
err = cb(session, event, offset, data);
if (err)
return err;
offset += event->header.size;
if (event->header.type == PERF_RECORD_AUXTRACE)
offset += event->auxtrace.size;
} while (offset < max_offset);
return err;
}
static s64 perf_session__process_event(struct perf_session *session,
union perf_event *event, u64 file_offset)
{
struct evlist *evlist = session->evlist;
struct perf_tool *tool = session->tool;
int ret;
perf session: Handle endianity swap on sample_id_all header data Adding endianity swapping for event header attached via sample_id_all. Currently we dont do that and it's causing wrong data to be read when running report on architecture with different endianity than the record. The perf is currently able to process 32-bit PPC samples on 32-bit and 64-bit x86. Together with other endianity patches, this change fixies perf report discrepancies on origin and target systems as described in test 1 below, e.g. following perf report diff: ... 0.12% ps [kernel.kallsyms] [k] clear_page - 0.12% awk bash [.] alloc_word_desc + 0.12% awk bash [.] yyparse 0.11% beah-rhts-task libpython2.6.so.1.0 [.] 0x5560e 0.10% perf libc-2.12.so [.] __ctype_toupper_loc - 0.09% rhts-test-runne bash [.] maybe_make_export_env + 0.09% rhts-test-runne bash [.] 0x385a0 0.09% ps [kernel.kallsyms] [k] page_fault ... Note, running following to test perf endianity handling: test 1) - origin system: # perf record -a -- sleep 10 (any perf record will do) # perf report > report.origin # perf archive perf.data - copy the perf.data, report.origin and perf.data.tar.bz2 to a target system and run: # tar xjvf perf.data.tar.bz2 -C ~/.debug # perf report > report.target # diff -u report.origin report.target - the diff should produce no output (besides some white space stuff and possibly different date/TZ output) test 2) - origin system: # perf record -ag -fo /tmp/perf.data -- sleep 1 - mount origin system root to the target system on /mnt/origin - target system: # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \ --kallsyms /mnt/origin/proc/kallsyms - complete perf.data header is displayed Signed-off-by: Jiri Olsa <jolsa@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1338380624-7443-3-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-05-30 20:23:43 +08:00
if (session->header.needs_swap)
event_swap(event, evlist__sample_id_all(evlist));
if (event->header.type >= PERF_RECORD_HEADER_MAX)
return -EINVAL;
events_stats__inc(&evlist->stats, event->header.type);
if (event->header.type >= PERF_RECORD_USER_TYPE_START)
return perf_session__process_user_event(session, event, file_offset);
if (tool->ordered_events) {
u64 timestamp = -1ULL;
perf tools: Optimize sample parsing for ordered events Currently when using ordered events we parse the sample twice (the perf_evlist__parse_sample function). Once before we queue the sample for sorting: perf_session__process_event perf_evlist__parse_sample(sample) perf_session__queue_event(sample.time) And then when we deliver the sorted sample: ordered_events__deliver_event perf_evlist__parse_sample perf_session__deliver_event We can skip the initial full sample parsing by using perf_evlist__parse_sample_timestamp function, which got introduced earlier. The new path looks like: perf_session__process_event perf_evlist__parse_sample_timestamp perf_session__queue_event ordered_events__deliver_event perf_session__deliver_event perf_evlist__parse_sample It saves some instructions and is slightly faster: Before: Performance counter stats for './perf.old report --stdio' (5 runs): 64,396,007,225 cycles:u ( +- 0.97% ) 105,882,112,735 instructions:u # 1.64 insn per cycle ( +- 0.00% ) 21.618103465 seconds time elapsed ( +- 1.12% ) After: Performance counter stats for './perf report --stdio' (5 runs): 60,567,807,182 cycles:u ( +- 0.40% ) 104,853,333,514 instructions:u # 1.73 insn per cycle ( +- 0.00% ) 20.168895243 seconds time elapsed ( +- 0.32% ) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-cjp2tuk0qkjs9dxzlpmm34ua@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 19:21:14 +08:00
ret = perf_evlist__parse_sample_timestamp(evlist, event, &timestamp);
if (ret && ret != -1)
perf tools: Optimize sample parsing for ordered events Currently when using ordered events we parse the sample twice (the perf_evlist__parse_sample function). Once before we queue the sample for sorting: perf_session__process_event perf_evlist__parse_sample(sample) perf_session__queue_event(sample.time) And then when we deliver the sorted sample: ordered_events__deliver_event perf_evlist__parse_sample perf_session__deliver_event We can skip the initial full sample parsing by using perf_evlist__parse_sample_timestamp function, which got introduced earlier. The new path looks like: perf_session__process_event perf_evlist__parse_sample_timestamp perf_session__queue_event ordered_events__deliver_event perf_session__deliver_event perf_evlist__parse_sample It saves some instructions and is slightly faster: Before: Performance counter stats for './perf.old report --stdio' (5 runs): 64,396,007,225 cycles:u ( +- 0.97% ) 105,882,112,735 instructions:u # 1.64 insn per cycle ( +- 0.00% ) 21.618103465 seconds time elapsed ( +- 1.12% ) After: Performance counter stats for './perf report --stdio' (5 runs): 60,567,807,182 cycles:u ( +- 0.40% ) 104,853,333,514 instructions:u # 1.73 insn per cycle ( +- 0.00% ) 20.168895243 seconds time elapsed ( +- 0.32% ) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-cjp2tuk0qkjs9dxzlpmm34ua@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 19:21:14 +08:00
return ret;
ret = perf_session__queue_event(session, event, timestamp, file_offset);
if (ret != -ETIME)
return ret;
}
perf tools: Optimize sample parsing for ordered events Currently when using ordered events we parse the sample twice (the perf_evlist__parse_sample function). Once before we queue the sample for sorting: perf_session__process_event perf_evlist__parse_sample(sample) perf_session__queue_event(sample.time) And then when we deliver the sorted sample: ordered_events__deliver_event perf_evlist__parse_sample perf_session__deliver_event We can skip the initial full sample parsing by using perf_evlist__parse_sample_timestamp function, which got introduced earlier. The new path looks like: perf_session__process_event perf_evlist__parse_sample_timestamp perf_session__queue_event ordered_events__deliver_event perf_session__deliver_event perf_evlist__parse_sample It saves some instructions and is slightly faster: Before: Performance counter stats for './perf.old report --stdio' (5 runs): 64,396,007,225 cycles:u ( +- 0.97% ) 105,882,112,735 instructions:u # 1.64 insn per cycle ( +- 0.00% ) 21.618103465 seconds time elapsed ( +- 1.12% ) After: Performance counter stats for './perf report --stdio' (5 runs): 60,567,807,182 cycles:u ( +- 0.40% ) 104,853,333,514 instructions:u # 1.73 insn per cycle ( +- 0.00% ) 20.168895243 seconds time elapsed ( +- 0.32% ) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-cjp2tuk0qkjs9dxzlpmm34ua@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-08-03 19:21:14 +08:00
return perf_session__deliver_event(session, event, tool, file_offset);
}
void perf_event_header__bswap(struct perf_event_header *hdr)
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
{
hdr->type = bswap_32(hdr->type);
hdr->misc = bswap_16(hdr->misc);
hdr->size = bswap_16(hdr->size);
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
}
struct thread *perf_session__findnew(struct perf_session *session, pid_t pid)
{
return machine__findnew_thread(&session->machines.host, -1, pid);
}
/*
* Threads are identified by pid and tid, and the idle task has pid == tid == 0.
* So here a single thread is created for that, but actually there is a separate
* idle task per cpu, so there should be one 'struct thread' per cpu, but there
* is only 1. That causes problems for some tools, requiring workarounds. For
* example get_idle_thread() in builtin-sched.c, or thread_stack__per_cpu().
*/
perf tools: Make perf_session__register_idle_thread drop the refcount Note that since the thread was already inserted to the session list, it will be released when the session is released. Also, in perf_session__register_idle_thread() failure path, the thread should be put before returning. Refcnt debugger shows that the perf_session__register_idle_thread gets the returned thread, but the caller (__cmd_top) does not put the returned idle thread. ---- ==== [0] ==== Unreclaimed thread@0x24e6240 Refcount +1 => 0 at ./perf(thread__new+0xe5) [0x4c8a75] ./perf(machine__findnew_thread+0x9a) [0x4bbdba] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] Refcount +1 => 1 at ./perf(thread__get+0x2c) [0x4c8bcc] ./perf(machine__findnew_thread+0xee) [0x4bbe0e] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] Refcount +1 => 2 at ./perf(thread__get+0x2c) [0x4c8bcc] ./perf(machine__findnew_thread+0x112) [0x4bbe32] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021122.10245.69707.stgit@localhost.localdomain [ Drop the refcount in perf_session__register_idle_thread() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09 10:11:23 +08:00
int perf_session__register_idle_thread(struct perf_session *session)
{
struct thread *thread;
perf tools: Make perf_session__register_idle_thread drop the refcount Note that since the thread was already inserted to the session list, it will be released when the session is released. Also, in perf_session__register_idle_thread() failure path, the thread should be put before returning. Refcnt debugger shows that the perf_session__register_idle_thread gets the returned thread, but the caller (__cmd_top) does not put the returned idle thread. ---- ==== [0] ==== Unreclaimed thread@0x24e6240 Refcount +1 => 0 at ./perf(thread__new+0xe5) [0x4c8a75] ./perf(machine__findnew_thread+0x9a) [0x4bbdba] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] Refcount +1 => 1 at ./perf(thread__get+0x2c) [0x4c8bcc] ./perf(machine__findnew_thread+0xee) [0x4bbe0e] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] Refcount +1 => 2 at ./perf(thread__get+0x2c) [0x4c8bcc] ./perf(machine__findnew_thread+0x112) [0x4bbe32] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021122.10245.69707.stgit@localhost.localdomain [ Drop the refcount in perf_session__register_idle_thread() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09 10:11:23 +08:00
int err = 0;
thread = machine__findnew_thread(&session->machines.host, 0, 0);
if (thread == NULL || thread__set_comm(thread, "swapper", 0)) {
pr_err("problem inserting idle task.\n");
perf tools: Make perf_session__register_idle_thread drop the refcount Note that since the thread was already inserted to the session list, it will be released when the session is released. Also, in perf_session__register_idle_thread() failure path, the thread should be put before returning. Refcnt debugger shows that the perf_session__register_idle_thread gets the returned thread, but the caller (__cmd_top) does not put the returned idle thread. ---- ==== [0] ==== Unreclaimed thread@0x24e6240 Refcount +1 => 0 at ./perf(thread__new+0xe5) [0x4c8a75] ./perf(machine__findnew_thread+0x9a) [0x4bbdba] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] Refcount +1 => 1 at ./perf(thread__get+0x2c) [0x4c8bcc] ./perf(machine__findnew_thread+0xee) [0x4bbe0e] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] Refcount +1 => 2 at ./perf(thread__get+0x2c) [0x4c8bcc] ./perf(machine__findnew_thread+0x112) [0x4bbe32] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021122.10245.69707.stgit@localhost.localdomain [ Drop the refcount in perf_session__register_idle_thread() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09 10:11:23 +08:00
err = -1;
}
perf tools: Add PERF_RECORD_NAMESPACES to include namespaces related info Introduce a new option to record PERF_RECORD_NAMESPACES events emitted by the kernel when fork, clone, setns or unshare are invoked. And update perf-record documentation with the new option to record namespace events. Committer notes: Combined it with a later patch to allow printing it via 'perf report -D' and be able to test the feature introduced in this patch. Had to move here also perf_ns__name(), that was introduced in another later patch. Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt: util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=] ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx ^ Testing it: # perf record --namespaces -a ^C[ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ] # # perf report -D <SNIP> 3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7 [0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc, 4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb] 0x1151e0 [0x30]: event: 9 . . ... raw event: size 48 bytes . 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h.... . 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c.... . 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................ <SNIP> NAMESPACES events: 1 <SNIP> # Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sargun Dhillon <sargun@sargun.me> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-03-08 04:41:43 +08:00
if (thread == NULL || thread__set_namespaces(thread, 0, NULL)) {
pr_err("problem inserting idle task.\n");
err = -1;
}
perf tools: Make perf_session__register_idle_thread drop the refcount Note that since the thread was already inserted to the session list, it will be released when the session is released. Also, in perf_session__register_idle_thread() failure path, the thread should be put before returning. Refcnt debugger shows that the perf_session__register_idle_thread gets the returned thread, but the caller (__cmd_top) does not put the returned idle thread. ---- ==== [0] ==== Unreclaimed thread@0x24e6240 Refcount +1 => 0 at ./perf(thread__new+0xe5) [0x4c8a75] ./perf(machine__findnew_thread+0x9a) [0x4bbdba] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] Refcount +1 => 1 at ./perf(thread__get+0x2c) [0x4c8bcc] ./perf(machine__findnew_thread+0xee) [0x4bbe0e] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] Refcount +1 => 2 at ./perf(thread__get+0x2c) [0x4c8bcc] ./perf(machine__findnew_thread+0x112) [0x4bbe32] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021122.10245.69707.stgit@localhost.localdomain [ Drop the refcount in perf_session__register_idle_thread() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09 10:11:23 +08:00
/* machine__findnew_thread() got the thread, so put it */
thread__put(thread);
return err;
}
perf session: Don't warn about out of order event if write_backward is used If write_backward attribute is set, records are written into kernel ring buffer from end to beginning, but read from beginning to end. To avoid 'XX out of order events recorded' warning message (timestamps of records is in reverse order when using write_backward), suppress the warning message if write_backward is selected by at lease one event. Result: Before this patch: # perf record -m 1 -e raw_syscalls:sys_exit/overwrite/ \ -e raw_syscalls:sys_enter \ dd if=/dev/zero of=/dev/null count=300 300+0 records in 300+0 records out 153600 bytes (154 kB) copied, 0.000601617 s, 255 MB/s [ perf record: Woken up 5 times to write data ] Warning: 40 out of order events recorded. [ perf record: Captured and wrote 0.096 MB perf.data (696 samples) ] After this patch: # perf record -m 1 -e raw_syscalls:sys_exit/overwrite/ \ -e raw_syscalls:sys_enter \ dd if=/dev/zero of=/dev/null count=300 300+0 records in 300+0 records out 153600 bytes (154 kB) copied, 0.000644873 s, 238 MB/s [ perf record: Woken up 5 times to write data ] [ perf record: Captured and wrote 0.096 MB perf.data (696 samples) ] Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-15-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:46 +08:00
static void
perf_session__warn_order(const struct perf_session *session)
{
const struct ordered_events *oe = &session->ordered_events;
struct evsel *evsel;
perf session: Don't warn about out of order event if write_backward is used If write_backward attribute is set, records are written into kernel ring buffer from end to beginning, but read from beginning to end. To avoid 'XX out of order events recorded' warning message (timestamps of records is in reverse order when using write_backward), suppress the warning message if write_backward is selected by at lease one event. Result: Before this patch: # perf record -m 1 -e raw_syscalls:sys_exit/overwrite/ \ -e raw_syscalls:sys_enter \ dd if=/dev/zero of=/dev/null count=300 300+0 records in 300+0 records out 153600 bytes (154 kB) copied, 0.000601617 s, 255 MB/s [ perf record: Woken up 5 times to write data ] Warning: 40 out of order events recorded. [ perf record: Captured and wrote 0.096 MB perf.data (696 samples) ] After this patch: # perf record -m 1 -e raw_syscalls:sys_exit/overwrite/ \ -e raw_syscalls:sys_enter \ dd if=/dev/zero of=/dev/null count=300 300+0 records in 300+0 records out 153600 bytes (154 kB) copied, 0.000644873 s, 238 MB/s [ perf record: Woken up 5 times to write data ] [ perf record: Captured and wrote 0.096 MB perf.data (696 samples) ] Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-15-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:46 +08:00
bool should_warn = true;
evlist__for_each_entry(session->evlist, evsel) {
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 19:24:29 +08:00
if (evsel->core.attr.write_backward)
perf session: Don't warn about out of order event if write_backward is used If write_backward attribute is set, records are written into kernel ring buffer from end to beginning, but read from beginning to end. To avoid 'XX out of order events recorded' warning message (timestamps of records is in reverse order when using write_backward), suppress the warning message if write_backward is selected by at lease one event. Result: Before this patch: # perf record -m 1 -e raw_syscalls:sys_exit/overwrite/ \ -e raw_syscalls:sys_enter \ dd if=/dev/zero of=/dev/null count=300 300+0 records in 300+0 records out 153600 bytes (154 kB) copied, 0.000601617 s, 255 MB/s [ perf record: Woken up 5 times to write data ] Warning: 40 out of order events recorded. [ perf record: Captured and wrote 0.096 MB perf.data (696 samples) ] After this patch: # perf record -m 1 -e raw_syscalls:sys_exit/overwrite/ \ -e raw_syscalls:sys_enter \ dd if=/dev/zero of=/dev/null count=300 300+0 records in 300+0 records out 153600 bytes (154 kB) copied, 0.000644873 s, 238 MB/s [ perf record: Woken up 5 times to write data ] [ perf record: Captured and wrote 0.096 MB perf.data (696 samples) ] Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-15-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:46 +08:00
should_warn = false;
}
if (!should_warn)
return;
if (oe->nr_unordered_events != 0)
ui__warning("%u out of order events recorded.\n", oe->nr_unordered_events);
}
static void perf_session__warn_about_errors(const struct perf_session *session)
{
const struct events_stats *stats = &session->evlist->stats;
if (session->tool->lost == perf_event__process_lost &&
stats->nr_events[PERF_RECORD_LOST] != 0) {
ui__warning("Processed %d events and lost %d chunks!\n\n"
"Check IO/CPU overload!\n\n",
stats->nr_events[0],
stats->nr_events[PERF_RECORD_LOST]);
}
perf tools: handle PERF_RECORD_LOST_SAMPLES This patch modifies the perf tool to handle the new RECORD type, PERF_RECORD_LOST_SAMPLES. The number of lost-sample events is stored in .nr_events[PERF_RECORD_LOST_SAMPLES]. The exact number of samples which the kernel dropped is stored in total_lost_samples. When the percentage of dropped samples is greater than 5%, a warning is printed. Here are some examples: Eg 1, Recording different frequently-occurring events is safe with the patch. Only a very low drop rate is associated with such actions. $ perf record -e '{cycles:p,instructions:p}' -c 20003 --no-time ~/tchain ~/tchain $ perf report -D | tail SAMPLE events: 120243 MMAP2 events: 5 LOST_SAMPLES events: 24 FINISHED_ROUND events: 15 cycles:p stats: TOTAL events: 59348 SAMPLE events: 59348 instructions:p stats: TOTAL events: 60895 SAMPLE events: 60895 $ perf report --stdio --group # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 24 # # Samples: 120K of event 'anon group { cycles:p, instructions:p }' # Event count (approx.): 24048600000 # # Overhead Command Shared Object Symbol # ................ ........... ................ .................................. # 99.74% 99.86% tchain_edit tchain_edit [.] f3 0.09% 0.02% tchain_edit tchain_edit [.] f2 0.04% 0.00% tchain_edit [kernel.vmlinux] [k] ixgbe_read_reg Eg 2, Recording the same thing multiple times can lead to high drop rate, but it is not a useful configuration. $ perf record -e '{cycles:p,cycles:p}' -c 20003 --no-time ~/tchain Warning: Processed 600592 samples and lost 99.73% samples! [perf record: Woken up 148 times to write data] [perf record: Captured and wrote 36.922 MB perf.data (1206322 samples)] [perf record: Woken up 1 times to write data] [perf record: Captured and wrote 0.121 MB perf.data (1629 samples)] Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1431285195-14269-9-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 03:13:15 +08:00
if (session->tool->lost_samples == perf_event__process_lost_samples) {
double drop_rate;
drop_rate = (double)stats->total_lost_samples /
(double) (stats->nr_events[PERF_RECORD_SAMPLE] + stats->total_lost_samples);
if (drop_rate > 0.05) {
ui__warning("Processed %" PRIu64 " samples and lost %3.2f%%!\n\n",
perf tools: handle PERF_RECORD_LOST_SAMPLES This patch modifies the perf tool to handle the new RECORD type, PERF_RECORD_LOST_SAMPLES. The number of lost-sample events is stored in .nr_events[PERF_RECORD_LOST_SAMPLES]. The exact number of samples which the kernel dropped is stored in total_lost_samples. When the percentage of dropped samples is greater than 5%, a warning is printed. Here are some examples: Eg 1, Recording different frequently-occurring events is safe with the patch. Only a very low drop rate is associated with such actions. $ perf record -e '{cycles:p,instructions:p}' -c 20003 --no-time ~/tchain ~/tchain $ perf report -D | tail SAMPLE events: 120243 MMAP2 events: 5 LOST_SAMPLES events: 24 FINISHED_ROUND events: 15 cycles:p stats: TOTAL events: 59348 SAMPLE events: 59348 instructions:p stats: TOTAL events: 60895 SAMPLE events: 60895 $ perf report --stdio --group # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 24 # # Samples: 120K of event 'anon group { cycles:p, instructions:p }' # Event count (approx.): 24048600000 # # Overhead Command Shared Object Symbol # ................ ........... ................ .................................. # 99.74% 99.86% tchain_edit tchain_edit [.] f3 0.09% 0.02% tchain_edit tchain_edit [.] f2 0.04% 0.00% tchain_edit [kernel.vmlinux] [k] ixgbe_read_reg Eg 2, Recording the same thing multiple times can lead to high drop rate, but it is not a useful configuration. $ perf record -e '{cycles:p,cycles:p}' -c 20003 --no-time ~/tchain Warning: Processed 600592 samples and lost 99.73% samples! [perf record: Woken up 148 times to write data] [perf record: Captured and wrote 36.922 MB perf.data (1206322 samples)] [perf record: Woken up 1 times to write data] [perf record: Captured and wrote 0.121 MB perf.data (1629 samples)] Signed-off-by: Kan Liang <kan.liang@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@infradead.org Cc: eranian@google.com Link: http://lkml.kernel.org/r/1431285195-14269-9-git-send-email-kan.liang@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-05-11 03:13:15 +08:00
stats->nr_events[PERF_RECORD_SAMPLE] + stats->total_lost_samples,
drop_rate * 100.0);
}
}
if (session->tool->aux == perf_event__process_aux &&
stats->total_aux_lost != 0) {
ui__warning("AUX data lost %" PRIu64 " times out of %u!\n\n",
stats->total_aux_lost,
stats->nr_events[PERF_RECORD_AUX]);
}
if (session->tool->aux == perf_event__process_aux &&
stats->total_aux_partial != 0) {
bool vmm_exclusive = false;
(void)sysfs__read_bool("module/kvm_intel/parameters/vmm_exclusive",
&vmm_exclusive);
ui__warning("AUX data had gaps in it %" PRIu64 " times out of %u!\n\n"
"Are you running a KVM guest in the background?%s\n\n",
stats->total_aux_partial,
stats->nr_events[PERF_RECORD_AUX],
vmm_exclusive ?
"\nReloading kvm_intel module with vmm_exclusive=0\n"
"will reduce the gaps to only guest's timeslices." :
"");
}
if (stats->nr_unknown_events != 0) {
ui__warning("Found %u unknown events!\n\n"
"Is this an older tool processing a perf.data "
"file generated by a more recent tool?\n\n"
"If that is not the case, consider "
"reporting to linux-kernel@vger.kernel.org.\n\n",
stats->nr_unknown_events);
}
if (stats->nr_unknown_id != 0) {
ui__warning("%u samples with id not present in the header\n",
stats->nr_unknown_id);
}
if (stats->nr_invalid_chains != 0) {
ui__warning("Found invalid callchains!\n\n"
"%u out of %u events were discarded for this reason.\n\n"
"Consider reporting to linux-kernel@vger.kernel.org.\n\n",
stats->nr_invalid_chains,
stats->nr_events[PERF_RECORD_SAMPLE]);
}
if (stats->nr_unprocessable_samples != 0) {
ui__warning("%u unprocessable samples recorded.\n"
"Do you have a KVM guest running and not using 'perf kvm'?\n",
stats->nr_unprocessable_samples);
}
perf session: Don't warn about out of order event if write_backward is used If write_backward attribute is set, records are written into kernel ring buffer from end to beginning, but read from beginning to end. To avoid 'XX out of order events recorded' warning message (timestamps of records is in reverse order when using write_backward), suppress the warning message if write_backward is selected by at lease one event. Result: Before this patch: # perf record -m 1 -e raw_syscalls:sys_exit/overwrite/ \ -e raw_syscalls:sys_enter \ dd if=/dev/zero of=/dev/null count=300 300+0 records in 300+0 records out 153600 bytes (154 kB) copied, 0.000601617 s, 255 MB/s [ perf record: Woken up 5 times to write data ] Warning: 40 out of order events recorded. [ perf record: Captured and wrote 0.096 MB perf.data (696 samples) ] After this patch: # perf record -m 1 -e raw_syscalls:sys_exit/overwrite/ \ -e raw_syscalls:sys_enter \ dd if=/dev/zero of=/dev/null count=300 300+0 records in 300+0 records out 153600 bytes (154 kB) copied, 0.000644873 s, 238 MB/s [ perf record: Woken up 5 times to write data ] [ perf record: Captured and wrote 0.096 MB perf.data (696 samples) ] Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1468485287-33422-15-git-send-email-wangnan0@huawei.com Signed-off-by: He Kuang <hekuang@huawei.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-07-14 16:34:46 +08:00
perf_session__warn_order(session);
events_stats__auxtrace_error_warn(stats);
if (stats->nr_proc_map_timeout != 0) {
ui__warning("%d map information files for pre-existing threads were\n"
"not processed, if there are samples for addresses they\n"
"will not be resolved, you may find out which are these\n"
"threads by running with -v and redirecting the output\n"
"to a file.\n"
"The time limit to process proc map is too short?\n"
"Increase it by --proc-map-timeout\n",
stats->nr_proc_map_timeout);
}
}
static int perf_session__flush_thread_stack(struct thread *thread,
void *p __maybe_unused)
{
return thread_stack__flush(thread);
}
static int perf_session__flush_thread_stacks(struct perf_session *session)
{
return machines__for_each_thread(&session->machines,
perf_session__flush_thread_stack,
NULL);
}
volatile int session_done;
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
static int __perf_session__process_decomp_events(struct perf_session *session);
static int __perf_session__process_pipe_events(struct perf_session *session)
{
struct ordered_events *oe = &session->ordered_events;
struct perf_tool *tool = session->tool;
int fd = perf_data__fd(session->data);
union perf_event *event;
uint32_t size, cur_size = 0;
void *buf = NULL;
s64 skip = 0;
u64 head;
ssize_t err;
void *p;
perf_tool__fill_defaults(tool);
head = 0;
cur_size = sizeof(union perf_event);
buf = malloc(cur_size);
if (!buf)
return -errno;
perf inject: Copy events when reordering events in pipe mode __perf_session__process_pipe_events reuses the same memory buffer to process all events in the pipe. When reordering is needed (e.g. -b option), events are not immediately flushed, but kept around until reordering is possible, causing memory corruption. The problem is usually observed by a "Unknown sample error" output. It can easily be reproduced by: perf record -o - noploop | perf inject -b > output Committer testing: Before: $ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null stress: info: [8297] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd stress: info: [8297] successful run completed in 2s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] Warning: Found 1 unknown events! Is this an older tool processing a perf.data file generated by a more recent tool? If that is not the case, consider reporting to linux-kernel@vger.kernel.org. $ After: $ perf record -o - stress -t 2 -c 2 | perf inject -b > /dev/null stress: info: [9027] dispatching hogs: 2 cpu, 0 io, 0 vm, 0 hdd stress: info: [9027] successful run completed in 2s [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] no symbols found in /usr/bin/stress, maybe install a debug package? no symbols found in /usr/bin/stress, maybe install a debug package? $ Signed-off-by: David Carrillo-Cisneros <davidcc@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Simon Que <sque@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20170410201432.24807-3-davidcc@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-04-11 04:14:27 +08:00
ordered_events__set_copy_on_queue(oe, true);
more:
event = buf;
err = readn(fd, event, sizeof(struct perf_event_header));
if (err <= 0) {
if (err == 0)
goto done;
pr_err("failed to read event header\n");
goto out_err;
}
if (session->header.needs_swap)
perf_event_header__bswap(&event->header);
size = event->header.size;
if (size < sizeof(struct perf_event_header)) {
pr_err("bad event header size\n");
goto out_err;
}
if (size > cur_size) {
void *new = realloc(buf, size);
if (!new) {
pr_err("failed to allocate memory to read event\n");
goto out_err;
}
buf = new;
cur_size = size;
event = buf;
}
p = event;
p += sizeof(struct perf_event_header);
if (size - sizeof(struct perf_event_header)) {
err = readn(fd, p, size - sizeof(struct perf_event_header));
if (err <= 0) {
if (err == 0) {
pr_err("unexpected end of event stream\n");
goto done;
}
pr_err("failed to read event data\n");
goto out_err;
}
}
if ((skip = perf_session__process_event(session, event, head)) < 0) {
pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n",
head, event->header.size, event->header.type);
err = -EINVAL;
goto out_err;
}
head += size;
if (skip > 0)
head += skip;
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
err = __perf_session__process_decomp_events(session);
if (err)
goto out_err;
if (!session_done())
goto more;
done:
/* do the final flush for ordered samples */
err = ordered_events__flush(oe, OE_FLUSH__FINAL);
if (err)
goto out_err;
err = auxtrace__flush_events(session, tool);
if (err)
goto out_err;
err = perf_session__flush_thread_stacks(session);
out_err:
free(buf);
if (!tool->no_warn)
perf_session__warn_about_errors(session);
ordered_events__free(&session->ordered_events);
auxtrace__free_events(session);
return err;
}
static union perf_event *
perf session: Fix decompression of PERF_RECORD_COMPRESSED records Avoid termination of trace loading in case the last record in the decompressed buffer partly resides in the following mmaped PERF_RECORD_COMPRESSED record. In this case NULL value returned by fetch_mmaped_event() means to proceed to the next mmaped record then decompress it and load compressed events. The issue can be reproduced like this: $ perf record -z -- some_long_running_workload $ perf report --stdio -vv decomp (B): 44519 to 163000 decomp (B): 48119 to 174800 decomp (B): 65527 to 131072 fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data? Error: failed to process sample ... Testing: 71: Zstd perf.data compression/decompression : Ok $ tools/perf/perf report -vv --stdio decomp (B): 59593 to 262160 decomp (B): 4438 to 16512 decomp (B): 285 to 880 Looking at the vmlinux_path (8 entries long) Using vmlinux for symbols decomp (B): 57474 to 261248 prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data? decomp (B): 25 to 32 decomp (B): 52 to 120 ... Fixes: 57fc032ad643 ("perf session: Avoid infinite loop when seeing invalid header.size") Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2 Co-developed-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-18 22:21:03 +08:00
prefetch_event(char *buf, u64 head, size_t mmap_size,
bool needs_swap, union perf_event *error)
{
union perf_event *event;
/*
* Ensure we have enough space remaining to read
* the size of the event in the headers.
*/
if (head + sizeof(event->header) > mmap_size)
return NULL;
event = (union perf_event *)(buf + head);
perf session: Fix decompression of PERF_RECORD_COMPRESSED records Avoid termination of trace loading in case the last record in the decompressed buffer partly resides in the following mmaped PERF_RECORD_COMPRESSED record. In this case NULL value returned by fetch_mmaped_event() means to proceed to the next mmaped record then decompress it and load compressed events. The issue can be reproduced like this: $ perf record -z -- some_long_running_workload $ perf report --stdio -vv decomp (B): 44519 to 163000 decomp (B): 48119 to 174800 decomp (B): 65527 to 131072 fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data? Error: failed to process sample ... Testing: 71: Zstd perf.data compression/decompression : Ok $ tools/perf/perf report -vv --stdio decomp (B): 59593 to 262160 decomp (B): 4438 to 16512 decomp (B): 285 to 880 Looking at the vmlinux_path (8 entries long) Using vmlinux for symbols decomp (B): 57474 to 261248 prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data? decomp (B): 25 to 32 decomp (B): 52 to 120 ... Fixes: 57fc032ad643 ("perf session: Avoid infinite loop when seeing invalid header.size") Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2 Co-developed-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-18 22:21:03 +08:00
if (needs_swap)
perf_event_header__bswap(&event->header);
perf session: Fix decompression of PERF_RECORD_COMPRESSED records Avoid termination of trace loading in case the last record in the decompressed buffer partly resides in the following mmaped PERF_RECORD_COMPRESSED record. In this case NULL value returned by fetch_mmaped_event() means to proceed to the next mmaped record then decompress it and load compressed events. The issue can be reproduced like this: $ perf record -z -- some_long_running_workload $ perf report --stdio -vv decomp (B): 44519 to 163000 decomp (B): 48119 to 174800 decomp (B): 65527 to 131072 fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data? Error: failed to process sample ... Testing: 71: Zstd perf.data compression/decompression : Ok $ tools/perf/perf report -vv --stdio decomp (B): 59593 to 262160 decomp (B): 4438 to 16512 decomp (B): 285 to 880 Looking at the vmlinux_path (8 entries long) Using vmlinux for symbols decomp (B): 57474 to 261248 prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data? decomp (B): 25 to 32 decomp (B): 52 to 120 ... Fixes: 57fc032ad643 ("perf session: Avoid infinite loop when seeing invalid header.size") Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2 Co-developed-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-18 22:21:03 +08:00
if (head + event->header.size <= mmap_size)
return event;
/* We're not fetching the event so swap back again */
if (needs_swap)
perf_event_header__bswap(&event->header);
perf session: Fix decompression of PERF_RECORD_COMPRESSED records Avoid termination of trace loading in case the last record in the decompressed buffer partly resides in the following mmaped PERF_RECORD_COMPRESSED record. In this case NULL value returned by fetch_mmaped_event() means to proceed to the next mmaped record then decompress it and load compressed events. The issue can be reproduced like this: $ perf record -z -- some_long_running_workload $ perf report --stdio -vv decomp (B): 44519 to 163000 decomp (B): 48119 to 174800 decomp (B): 65527 to 131072 fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data? Error: failed to process sample ... Testing: 71: Zstd perf.data compression/decompression : Ok $ tools/perf/perf report -vv --stdio decomp (B): 59593 to 262160 decomp (B): 4438 to 16512 decomp (B): 285 to 880 Looking at the vmlinux_path (8 entries long) Using vmlinux for symbols decomp (B): 57474 to 261248 prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data? decomp (B): 25 to 32 decomp (B): 52 to 120 ... Fixes: 57fc032ad643 ("perf session: Avoid infinite loop when seeing invalid header.size") Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2 Co-developed-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-18 22:21:03 +08:00
pr_debug("%s: head=%#" PRIx64 " event->header_size=%#x, mmap_size=%#zx:"
" fuzzed or compressed perf.data?\n",__func__, head, event->header.size, mmap_size);
perf session: Fix decompression of PERF_RECORD_COMPRESSED records Avoid termination of trace loading in case the last record in the decompressed buffer partly resides in the following mmaped PERF_RECORD_COMPRESSED record. In this case NULL value returned by fetch_mmaped_event() means to proceed to the next mmaped record then decompress it and load compressed events. The issue can be reproduced like this: $ perf record -z -- some_long_running_workload $ perf report --stdio -vv decomp (B): 44519 to 163000 decomp (B): 48119 to 174800 decomp (B): 65527 to 131072 fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data? Error: failed to process sample ... Testing: 71: Zstd perf.data compression/decompression : Ok $ tools/perf/perf report -vv --stdio decomp (B): 59593 to 262160 decomp (B): 4438 to 16512 decomp (B): 285 to 880 Looking at the vmlinux_path (8 entries long) Using vmlinux for symbols decomp (B): 57474 to 261248 prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data? decomp (B): 25 to 32 decomp (B): 52 to 120 ... Fixes: 57fc032ad643 ("perf session: Avoid infinite loop when seeing invalid header.size") Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2 Co-developed-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-18 22:21:03 +08:00
return error;
}
static union perf_event *
fetch_mmaped_event(u64 head, size_t mmap_size, char *buf, bool needs_swap)
{
return prefetch_event(buf, head, mmap_size, needs_swap, ERR_PTR(-EINVAL));
}
static union perf_event *
fetch_decomp_event(u64 head, size_t mmap_size, char *buf, bool needs_swap)
{
return prefetch_event(buf, head, mmap_size, needs_swap, NULL);
}
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
static int __perf_session__process_decomp_events(struct perf_session *session)
{
s64 skip;
u64 size, file_pos = 0;
struct decomp *decomp = session->decomp_last;
if (!decomp)
return 0;
while (decomp->head < decomp->size && !session_done()) {
perf session: Fix decompression of PERF_RECORD_COMPRESSED records Avoid termination of trace loading in case the last record in the decompressed buffer partly resides in the following mmaped PERF_RECORD_COMPRESSED record. In this case NULL value returned by fetch_mmaped_event() means to proceed to the next mmaped record then decompress it and load compressed events. The issue can be reproduced like this: $ perf record -z -- some_long_running_workload $ perf report --stdio -vv decomp (B): 44519 to 163000 decomp (B): 48119 to 174800 decomp (B): 65527 to 131072 fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data? Error: failed to process sample ... Testing: 71: Zstd perf.data compression/decompression : Ok $ tools/perf/perf report -vv --stdio decomp (B): 59593 to 262160 decomp (B): 4438 to 16512 decomp (B): 285 to 880 Looking at the vmlinux_path (8 entries long) Using vmlinux for symbols decomp (B): 57474 to 261248 prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data? decomp (B): 25 to 32 decomp (B): 52 to 120 ... Fixes: 57fc032ad643 ("perf session: Avoid infinite loop when seeing invalid header.size") Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2 Co-developed-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-18 22:21:03 +08:00
union perf_event *event = fetch_decomp_event(decomp->head, decomp->size, decomp->data,
session->header.needs_swap);
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
if (!event)
break;
size = event->header.size;
if (size < sizeof(struct perf_event_header) ||
(skip = perf_session__process_event(session, event, file_pos)) < 0) {
pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n",
decomp->file_pos + decomp->head, event->header.size, event->header.type);
return -EINVAL;
}
if (skip)
size += skip;
decomp->head += size;
}
return 0;
}
perf tools: Fix mmap limitations on 32-bit This is a suggested patch to fix the bug I reported at: http://marc.info/?l=linux-kernel&m=135033028924652&w=2 Essentially, there is a hard requirement that when perf analyzes a trace, it must have the entire thing mmap()'d. Therefore the scheme used on 32-bit where we have a fixed (8) number of 32MB mmaps, and cycle through them, simply does not work. One of the reasons this requirement exists is because the iterators maintain references to perf entry objects and those references don't just simply go away when this mmap code decides to cycle an old mmap area out and reuse it. At this point, those entry pointers now point to garbage resulting in unpredictable behavior and crashes. It is better to try to mmap() as much as we can and if we do actually run into address space limitations, the failure of the mmap() call will indicate that and stop processing. I noticed that perf_session->mmap_window is set to a constant in one location, and only used in one other location. So I got rid of it altogether. So we adjust the size of the mmaps[] array to the maximum we could need. On 64-bit we only need one slot. On 32-bit we could need up to 128 (128 * 32MB == 4GB). I've verified that this allows a large (~600MB) perf.data file to be analyzed properly with a 32-bit perf binary, which previously was not possible. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20121110.141219.582924082787523608.davem@davemloft.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-11-11 03:12:19 +08:00
/*
* On 64bit we can mmap the data file in one go. No need for tiny mmap
* slices. On 32bit we use 32MB.
*/
#if BITS_PER_LONG == 64
#define MMAP_SIZE ULLONG_MAX
#define NUM_MMAPS 1
#else
#define MMAP_SIZE (32 * 1024 * 1024ULL)
#define NUM_MMAPS 128
#endif
struct reader;
typedef s64 (*reader_cb_t)(struct perf_session *session,
union perf_event *event,
u64 file_offset);
struct reader {
int fd;
u64 data_size;
u64 data_offset;
reader_cb_t process;
};
static int
reader__process_events(struct reader *rd, struct perf_session *session,
struct ui_progress *prog)
{
u64 data_size = rd->data_size;
u64 head, page_offset, file_offset, file_pos, size;
int err = 0, mmap_prot, mmap_flags, map_idx = 0;
size_t mmap_size;
perf tools: Fix mmap limitations on 32-bit This is a suggested patch to fix the bug I reported at: http://marc.info/?l=linux-kernel&m=135033028924652&w=2 Essentially, there is a hard requirement that when perf analyzes a trace, it must have the entire thing mmap()'d. Therefore the scheme used on 32-bit where we have a fixed (8) number of 32MB mmaps, and cycle through them, simply does not work. One of the reasons this requirement exists is because the iterators maintain references to perf entry objects and those references don't just simply go away when this mmap code decides to cycle an old mmap area out and reuse it. At this point, those entry pointers now point to garbage resulting in unpredictable behavior and crashes. It is better to try to mmap() as much as we can and if we do actually run into address space limitations, the failure of the mmap() call will indicate that and stop processing. I noticed that perf_session->mmap_window is set to a constant in one location, and only used in one other location. So I got rid of it altogether. So we adjust the size of the mmaps[] array to the maximum we could need. On 64-bit we only need one slot. On 32-bit we could need up to 128 (128 * 32MB == 4GB). I've verified that this allows a large (~600MB) perf.data file to be analyzed properly with a 32-bit perf binary, which previously was not possible. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20121110.141219.582924082787523608.davem@davemloft.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-11-11 03:12:19 +08:00
char *buf, *mmaps[NUM_MMAPS];
union perf_event *event;
s64 skip;
page_offset = page_size * (rd->data_offset / page_size);
file_offset = page_offset;
head = rd->data_offset - page_offset;
ui_progress__init_size(prog, data_size, "Processing events...");
perf record: Avoid infinite loop at buildid processing with no samples If a session contains no events, we can get stuck in an infinite loop in __perf_session__process_events, with a non-zero file_size and data_offset, but a zero data_size. In this case, we can mmap the entirety of the file (consisting of the file and attribute headers), and fetch_mmaped_event will correctly refuse to read any (unmapped and non-existent) event headers. This causes __perf_session__process_events to unmap the file and retry with the exact same parameters, getting stuck in an infinite loop. This has been observed to result in an exit-time hang when counting rare/unschedulable events with perf record, and can be triggered artificially with the script below: ---- #!/bin/sh printf "REPRO: launching perf\n"; ./perf record -e software/config=9/ sleep 1 & PERF_PID=$!; sleep 0.002; kill -2 $PERF_PID; printf "REPRO: waiting for perf (%d) to exit...\n" "$PERF_PID"; wait $PERF_PID; printf "REPRO: perf exited\n"; ---- To avoid this, have __perf_session__process_events bail out early when the file has no data (i.e. it has no events). Commiter note: I only managed to reproduce this when setting /proc/sys/kernel/kptr_restrict to '1' and changing the code to purposefully not process any samples and no synthesized samples, i.e. kptr_restrict prevents 'record' from synthesizing the kernel mmaps for vmlinux + modules and since it is a workload started from perf, we don't synthesize mmap/comm records for existing threads. Adrian Hunter managed to reproduce it in his environment tho. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Tested-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1442423929-12253-1-git-send-email-mark.rutland@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-17 01:18:49 +08:00
data_size += rd->data_offset;
perf tools: Fix mmap limitations on 32-bit This is a suggested patch to fix the bug I reported at: http://marc.info/?l=linux-kernel&m=135033028924652&w=2 Essentially, there is a hard requirement that when perf analyzes a trace, it must have the entire thing mmap()'d. Therefore the scheme used on 32-bit where we have a fixed (8) number of 32MB mmaps, and cycle through them, simply does not work. One of the reasons this requirement exists is because the iterators maintain references to perf entry objects and those references don't just simply go away when this mmap code decides to cycle an old mmap area out and reuse it. At this point, those entry pointers now point to garbage resulting in unpredictable behavior and crashes. It is better to try to mmap() as much as we can and if we do actually run into address space limitations, the failure of the mmap() call will indicate that and stop processing. I noticed that perf_session->mmap_window is set to a constant in one location, and only used in one other location. So I got rid of it altogether. So we adjust the size of the mmaps[] array to the maximum we could need. On 64-bit we only need one slot. On 32-bit we could need up to 128 (128 * 32MB == 4GB). I've verified that this allows a large (~600MB) perf.data file to be analyzed properly with a 32-bit perf binary, which previously was not possible. Signed-off-by: David S. Miller <davem@davemloft.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20121110.141219.582924082787523608.davem@davemloft.net Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-11-11 03:12:19 +08:00
mmap_size = MMAP_SIZE;
if (mmap_size > data_size) {
mmap_size = data_size;
session->one_mmap = true;
}
memset(mmaps, 0, sizeof(mmaps));
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
mmap_prot = PROT_READ;
mmap_flags = MAP_SHARED;
if (session->header.needs_swap) {
perf tools: Cross platform perf.data analysis support There are still some problems related to loading vmlinux files, but those are unrelated to the feature implemented in this patch, so will get fixed in the next patches, but here are some results: 1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit userland 2. transfer it to a Debian Testing machine, PARISC64, 32-bit userland acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5 74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms] 55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko 41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko 90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko 984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5 22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0 353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0 d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0 a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0 acme@parisc:~/git/linux-2.6-tip$ acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms... ^^^^ The problem related to vmlinux handling, it shouldn't be trying this ^^^^ rather alien /proc/kallsyms at all... /lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols /lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols /home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols /usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols <SNIP more complaints about not finding the right build-ids, those will have to wait for 'perf archive' or plain copying what was collected by 'perf record' on the x86_64, source machine, see further below for an example of this > # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 acme@parisc:~/git/linux-2.6-tip$ Which matches what we get when running the same command for the same perf.data file on the F12, x86_64, source machine: [root@doppio linux-2.6-tip]# perf report --sort comm # Samples: 293085637 # # Overhead Command # ........ ............... # 61.70% find 23.50% perf 5.86% swapper 3.12% sshd 2.39% init 0.87% bash 0.86% sleep 0.59% dbus-daemon 0.25% hald 0.24% NetworkManager 0.19% hald-addon-rfki 0.15% openvpn 0.07% phy0 0.07% events/0 0.05% iwl3945 0.05% events/1 0.03% kondemand/0 [root@doppio linux-2.6-tip]# The other modes work as well, modulo the problem with vmlinux: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object # ........ ............... ................................. # 35.11% find ffffffff81002b5a 18.25% perf ffffffff8102235f 16.17% find libc-2.10.2.so 9.07% find find 5.80% swapper ffffffff8102235f 3.95% perf libc-2.10.2.so 2.33% init ffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k 1.35% find [e1000e] 0.68% sleep libc-2.10.2.so acme@parisc:~/git/linux-2.6-tip$ And the lack of the right buildids: acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15 # Samples: 293085637 # # Overhead Command Shared Object Symbol # ........ ............... ................................. ...... # 35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a 18.25% perf ffffffff8102235f [k] 0xffffffff8102235f 16.17% find libc-2.10.2.so [.] 0x00000000045782 9.07% find find [.] 0x0000000000fb0e 5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f 3.95% perf libc-2.10.2.so [.] 0x0000000007f398 2.33% init ffffffff810091b9 [k] 0xffffffff810091b9 1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440 1.35% find [e1000e] [k] 0x00000000010948 0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b acme@parisc:~/git/linux-2.6-tip$ But if we: acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug ls: cannot access /home/acme/.debug: No such file or directory acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/ acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/ acme@doppio's password: eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02 acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # acme@parisc:~/git/linux-2.6-tip$ Which matches what we get on the source, F12, x86_64 machine: [root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so # dso: libc-2.10.2.so # Samples: 64281170 # # Overhead Command Symbol # ........ ............... ...... # 14.98% perf [.] __GI_strcmp 12.30% find [.] __GI_memmove 9.25% find [.] _int_malloc 7.60% find [.] _IO_vfprintf_internal 6.10% find [.] _IO_new_file_xsputn 6.02% find [.] __GI_close 3.08% find [.] _IO_file_overflow_internal 3.08% find [.] malloc_consolidate 3.08% find [.] _int_free 3.08% find [.] __strchrnul 3.08% find [.] __getdents64 3.08% find [.] __write_nocancel 3.08% sleep [.] __GI__dl_addr 3.08% sshd [.] __libc_select 3.08% find [.] _IO_new_file_write 3.07% find [.] _IO_new_do_write 3.06% find [.] __GI___errno_location 3.05% find [.] __GI___libc_malloc 3.04% perf [.] __GI_memcpy 1.71% find [.] __fprintf_chk 1.29% bash [.] __gconv_transform_utf8_internal 0.79% dbus-daemon [.] __GI_strlen # # (For a higher level overview, try: perf report --sort comm,dso) # [root@doppio linux-2.6-tip]# So I think this is really, really nice in that it demonstrates the portability of perf.data files and the use of build-ids accross such aliens worlds :-) There are some things to fix tho, like the bitmap on the header, but things are looking good. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 22:23:10 +08:00
mmap_prot |= PROT_WRITE;
mmap_flags = MAP_PRIVATE;
}
remap:
buf = mmap(NULL, mmap_size, mmap_prot, mmap_flags, rd->fd,
file_offset);
if (buf == MAP_FAILED) {
pr_err("failed to mmap file\n");
err = -errno;
goto out;
}
mmaps[map_idx] = buf;
map_idx = (map_idx + 1) & (ARRAY_SIZE(mmaps) - 1);
file_pos = file_offset + head;
if (session->one_mmap) {
session->one_mmap_addr = buf;
session->one_mmap_offset = file_offset;
}
more:
perf session: Fix decompression of PERF_RECORD_COMPRESSED records Avoid termination of trace loading in case the last record in the decompressed buffer partly resides in the following mmaped PERF_RECORD_COMPRESSED record. In this case NULL value returned by fetch_mmaped_event() means to proceed to the next mmaped record then decompress it and load compressed events. The issue can be reproduced like this: $ perf record -z -- some_long_running_workload $ perf report --stdio -vv decomp (B): 44519 to 163000 decomp (B): 48119 to 174800 decomp (B): 65527 to 131072 fetch_mmaped_event: head=0x1ffe0 event->header_size=0x28, mmap_size=0x20000: fuzzed perf.data? Error: failed to process sample ... Testing: 71: Zstd perf.data compression/decompression : Ok $ tools/perf/perf report -vv --stdio decomp (B): 59593 to 262160 decomp (B): 4438 to 16512 decomp (B): 285 to 880 Looking at the vmlinux_path (8 entries long) Using vmlinux for symbols decomp (B): 57474 to 261248 prefetch_event: head=0x3fc78 event->header_size=0x28, mmap_size=0x3fc80: fuzzed or compressed perf.data? decomp (B): 25 to 32 decomp (B): 52 to 120 ... Fixes: 57fc032ad643 ("perf session: Avoid infinite loop when seeing invalid header.size") Link: https://marc.info/?l=linux-kernel&m=156580812427554&w=2 Co-developed-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/cf782c34-f3f8-2f9f-d6ab-145cee0d5322@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-18 22:21:03 +08:00
event = fetch_mmaped_event(head, mmap_size, buf, session->header.needs_swap);
if (IS_ERR(event))
return PTR_ERR(event);
if (!event) {
if (mmaps[map_idx]) {
munmap(mmaps[map_idx], mmap_size);
mmaps[map_idx] = NULL;
}
page_offset = page_size * (head / page_size);
file_offset += page_offset;
head -= page_offset;
goto remap;
}
size = event->header.size;
perf report: Report OOM in status line in the GTK UI An -ENOMEM error is not reported in the GTK GUI. Instead this error message pops up on the screen: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 Processing events... [974K/3M] Error:failed to process sample 0xf4198 [0x8]: failed to process type: 68 However when I use the same perf.data file with --stdio it works: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 --stdio \ | head -12 # Total Lost Samples: 0 # # Samples: 76K of event 'cycles' # Event count (approx.): 99056160000 # # Overhead Command Shared Object Symbol # ........ ............... ................. ......... # 8.81% find [kernel.kallsyms] [k] ftrace_likely_update 8.74% swapper [kernel.kallsyms] [k] ftrace_likely_update 8.34% sshd [kernel.kallsyms] [k] ftrace_likely_update 2.19% kworker/u512:1- [kernel.kallsyms] [k] ftrace_likely_update The sample precentage is a bit low..... The GUI always fails in the FINISHED_ROUND event (68) and does not indicate the reason why. When happened is the following. Perf report calls a lot of functions and down deep when a FINISHED_ROUND event is processed, these functions are called: perf_session__process_event() + perf_session__process_user_event() + process_finished_round() + ordered_events__flush() + __ordered_events__flush() + do_flush() + ordered_events__deliver_event() + perf_session__deliver_event() + machine__deliver_event() + perf_evlist__deliver_event() + process_sample_event() + hist_entry_iter_add() --> only called in GUI case!!! + hist_iter__report__callback() + symbol__inc_addr_sample() Now this functions runs out of memory and returns -ENOMEM. This is reported all the way up until function perf_session__process_event() returns to its caller, where -ENOMEM is changed to -EINVAL and processing stops: if ((skip = perf_session__process_event(session, event, head)) < 0) { pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", head, event->header.size, event->header.type); err = -EINVAL; goto out_err; } This occurred in the FINISHED_ROUND event when it has to process some 10000 entries and ran out of memory. This patch indicates the root cause and displays it in the status line of ther perf report GUI. Output before (on GUI status line): 0xf4198 [0x8]: failed to process type: 68 Output after: 0xf4198 [0x8]: failed to process type: 68 [not enough memory] Committer notes: the 'skip' variable needs to be initialized to -EINVAL, so that when the size is less than sizeof(struct perf_event_attr) we avoid this valid compiler warning: util/session.c: In function ‘perf_session__process_events’: util/session.c:1936:7: error: ‘skip’ may be used uninitialized in this function [-Werror=maybe-uninitialized] err = skip; ~~~~^~~~~~ util/session.c:1874:6: note: ‘skip’ was declared here s64 skip; ^~~~ cc1: all warnings being treated as errors Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20190423105303.61683-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-04-23 18:53:03 +08:00
skip = -EINVAL;
if (size < sizeof(struct perf_event_header) ||
(skip = rd->process(session, event, file_pos)) < 0) {
perf report: Report OOM in status line in the GTK UI An -ENOMEM error is not reported in the GTK GUI. Instead this error message pops up on the screen: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 Processing events... [974K/3M] Error:failed to process sample 0xf4198 [0x8]: failed to process type: 68 However when I use the same perf.data file with --stdio it works: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 --stdio \ | head -12 # Total Lost Samples: 0 # # Samples: 76K of event 'cycles' # Event count (approx.): 99056160000 # # Overhead Command Shared Object Symbol # ........ ............... ................. ......... # 8.81% find [kernel.kallsyms] [k] ftrace_likely_update 8.74% swapper [kernel.kallsyms] [k] ftrace_likely_update 8.34% sshd [kernel.kallsyms] [k] ftrace_likely_update 2.19% kworker/u512:1- [kernel.kallsyms] [k] ftrace_likely_update The sample precentage is a bit low..... The GUI always fails in the FINISHED_ROUND event (68) and does not indicate the reason why. When happened is the following. Perf report calls a lot of functions and down deep when a FINISHED_ROUND event is processed, these functions are called: perf_session__process_event() + perf_session__process_user_event() + process_finished_round() + ordered_events__flush() + __ordered_events__flush() + do_flush() + ordered_events__deliver_event() + perf_session__deliver_event() + machine__deliver_event() + perf_evlist__deliver_event() + process_sample_event() + hist_entry_iter_add() --> only called in GUI case!!! + hist_iter__report__callback() + symbol__inc_addr_sample() Now this functions runs out of memory and returns -ENOMEM. This is reported all the way up until function perf_session__process_event() returns to its caller, where -ENOMEM is changed to -EINVAL and processing stops: if ((skip = perf_session__process_event(session, event, head)) < 0) { pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", head, event->header.size, event->header.type); err = -EINVAL; goto out_err; } This occurred in the FINISHED_ROUND event when it has to process some 10000 entries and ran out of memory. This patch indicates the root cause and displays it in the status line of ther perf report GUI. Output before (on GUI status line): 0xf4198 [0x8]: failed to process type: 68 Output after: 0xf4198 [0x8]: failed to process type: 68 [not enough memory] Committer notes: the 'skip' variable needs to be initialized to -EINVAL, so that when the size is less than sizeof(struct perf_event_attr) we avoid this valid compiler warning: util/session.c: In function ‘perf_session__process_events’: util/session.c:1936:7: error: ‘skip’ may be used uninitialized in this function [-Werror=maybe-uninitialized] err = skip; ~~~~^~~~~~ util/session.c:1874:6: note: ‘skip’ was declared here s64 skip; ^~~~ cc1: all warnings being treated as errors Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20190423105303.61683-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-04-23 18:53:03 +08:00
pr_err("%#" PRIx64 " [%#x]: failed to process type: %d [%s]\n",
file_offset + head, event->header.size,
perf report: Report OOM in status line in the GTK UI An -ENOMEM error is not reported in the GTK GUI. Instead this error message pops up on the screen: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 Processing events... [974K/3M] Error:failed to process sample 0xf4198 [0x8]: failed to process type: 68 However when I use the same perf.data file with --stdio it works: [root@m35lp76 perf]# ./perf report -i perf.data.error68-1 --stdio \ | head -12 # Total Lost Samples: 0 # # Samples: 76K of event 'cycles' # Event count (approx.): 99056160000 # # Overhead Command Shared Object Symbol # ........ ............... ................. ......... # 8.81% find [kernel.kallsyms] [k] ftrace_likely_update 8.74% swapper [kernel.kallsyms] [k] ftrace_likely_update 8.34% sshd [kernel.kallsyms] [k] ftrace_likely_update 2.19% kworker/u512:1- [kernel.kallsyms] [k] ftrace_likely_update The sample precentage is a bit low..... The GUI always fails in the FINISHED_ROUND event (68) and does not indicate the reason why. When happened is the following. Perf report calls a lot of functions and down deep when a FINISHED_ROUND event is processed, these functions are called: perf_session__process_event() + perf_session__process_user_event() + process_finished_round() + ordered_events__flush() + __ordered_events__flush() + do_flush() + ordered_events__deliver_event() + perf_session__deliver_event() + machine__deliver_event() + perf_evlist__deliver_event() + process_sample_event() + hist_entry_iter_add() --> only called in GUI case!!! + hist_iter__report__callback() + symbol__inc_addr_sample() Now this functions runs out of memory and returns -ENOMEM. This is reported all the way up until function perf_session__process_event() returns to its caller, where -ENOMEM is changed to -EINVAL and processing stops: if ((skip = perf_session__process_event(session, event, head)) < 0) { pr_err("%#" PRIx64 " [%#x]: failed to process type: %d\n", head, event->header.size, event->header.type); err = -EINVAL; goto out_err; } This occurred in the FINISHED_ROUND event when it has to process some 10000 entries and ran out of memory. This patch indicates the root cause and displays it in the status line of ther perf report GUI. Output before (on GUI status line): 0xf4198 [0x8]: failed to process type: 68 Output after: 0xf4198 [0x8]: failed to process type: 68 [not enough memory] Committer notes: the 'skip' variable needs to be initialized to -EINVAL, so that when the size is less than sizeof(struct perf_event_attr) we avoid this valid compiler warning: util/session.c: In function ‘perf_session__process_events’: util/session.c:1936:7: error: ‘skip’ may be used uninitialized in this function [-Werror=maybe-uninitialized] err = skip; ~~~~^~~~~~ util/session.c:1874:6: note: ‘skip’ was declared here s64 skip; ^~~~ cc1: all warnings being treated as errors Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20190423105303.61683-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-04-23 18:53:03 +08:00
event->header.type, strerror(-skip));
err = skip;
goto out;
}
if (skip)
size += skip;
head += size;
file_pos += size;
perf report: Implement perf.data record decompression zstd_init(, comp_level = 0) initializes decompression part of API only hat now consists of zstd_decompress_stream() function. The perf.data PERF_RECORD_COMPRESSED records are decompressed using zstd_decompress_stream() function into a linked list of mmaped memory regions of mmap_comp_len size (struct decomp). After decompression of one COMPRESSED record its content is iterated and fetched for usual processing. The mmaped memory regions with decompressed events are kept in the linked list till the tool process termination. When dumping raw records (e.g., perf report -D --header) file offsets of events from compressed records are printed as zero. Committer notes: Since now we have support for processing PERF_RECORD_COMPRESSED, we see none, in raw form, like we saw in the previous patch commiter notes, they were decompressed into the usual PERF_RECORD_{FORK,MMAP,COMM,etc} records, we only see the stats for those PERF_RECORD_COMPRESSED events, and since I used the file generated in the commiter notes for the previous patch, there they are, 2 compressed records: $ perf report --header-only | grep cmdline # cmdline : /home/acme/bin/perf record -z2 sleep 1 $ perf report -D | grep COMPRESS COMPRESSED events: 2 COMPRESSED events: 0 $ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # # # Total Lost Samples: 0 # # Samples: 15 of event 'cycles:u' # Event count (approx.): 962227 # # Overhead Command Shared Object Symbol # ........ ....... ................ ........................... # 46.99% sleep libc-2.28.so [.] _dl_addr 29.24% sleep [unknown] [k] 0xffffffffaea00a67 16.45% sleep libc-2.28.so [.] __GI__IO_un_link.part.1 5.92% sleep ld-2.28.so [.] _dl_setup_hash 1.40% sleep libc-2.28.so [.] __nanosleep 0.00% sleep [unknown] [k] 0xffffffffaea00163 # # (Tip: To see callchains in a more compact form: perf report -g folded) # $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Reviewed-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/304b0a59-942c-3fe1-da02-aa749f87108b@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-19 01:45:11 +08:00
err = __perf_session__process_decomp_events(session);
if (err)
goto out;
ui_progress__update(prog, size);
if (session_done())
goto out;
if (file_pos < data_size)
goto more;
out:
return err;
}
static s64 process_simple(struct perf_session *session,
union perf_event *event,
u64 file_offset)
{
return perf_session__process_event(session, event, file_offset);
}
static int __perf_session__process_events(struct perf_session *session)
{
struct reader rd = {
.fd = perf_data__fd(session->data),
.data_size = session->header.data_size,
.data_offset = session->header.data_offset,
.process = process_simple,
};
struct ordered_events *oe = &session->ordered_events;
struct perf_tool *tool = session->tool;
struct ui_progress prog;
int err;
perf_tool__fill_defaults(tool);
if (rd.data_size == 0)
return -1;
ui_progress__init_size(&prog, rd.data_size, "Processing events...");
err = reader__process_events(&rd, session, &prog);
if (err)
goto out_err;
perf: Generalize perf lock's sample event reordering to the session layer The sample events recorded by perf record are not time ordered because we have one buffer per cpu for each event (even demultiplexed per task/per cpu for task bound events). But when we read trace events we want them to be ordered by time because many state machines are involved. There are currently two ways perf tools deal with that: - use -M to multiplex every buffers (perf sched, perf kmem) But this creates a lot of contention in SMP machines on record time. - use a post-processing time reordering (perf timechart, perf lock) The reordering used by timechart is simple but doesn't scale well with huge flow of events, in terms of performance and memory use (unusable with perf lock for example). Perf lock has its own samples reordering that flushes its memory use in a regular basis and that uses a sorting based on the previous event queued (a new event to be queued is close to the previous one most of the time). This patch proposes to export perf lock's samples reordering facility to the session layer that reads the events. So if a tool wants to get ordered sample events, it needs to set its struct perf_event_ops::ordered_samples to true and that's it. This prepares tracing based perf tools to get rid of the need to use buffers multiplexing (-M) or to implement their own reordering. Also lower the flush period to 2 as it's sufficient already. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Tom Zanussi <tzanussi@gmail.com>
2010-04-24 06:04:12 +08:00
/* do the final flush for ordered samples */
err = ordered_events__flush(oe, OE_FLUSH__FINAL);
if (err)
goto out_err;
err = auxtrace__flush_events(session, tool);
if (err)
goto out_err;
err = perf_session__flush_thread_stacks(session);
out_err:
ui_progress__finish();
if (!tool->no_warn)
perf_session__warn_about_errors(session);
/*
* We may switching perf.data output, make ordered_events
* reusable.
*/
ordered_events__reinit(&session->ordered_events);
auxtrace__free_events(session);
session->one_mmap = false;
return err;
}
int perf_session__process_events(struct perf_session *session)
{
perf tools: Make perf_session__register_idle_thread drop the refcount Note that since the thread was already inserted to the session list, it will be released when the session is released. Also, in perf_session__register_idle_thread() failure path, the thread should be put before returning. Refcnt debugger shows that the perf_session__register_idle_thread gets the returned thread, but the caller (__cmd_top) does not put the returned idle thread. ---- ==== [0] ==== Unreclaimed thread@0x24e6240 Refcount +1 => 0 at ./perf(thread__new+0xe5) [0x4c8a75] ./perf(machine__findnew_thread+0x9a) [0x4bbdba] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] Refcount +1 => 1 at ./perf(thread__get+0x2c) [0x4c8bcc] ./perf(machine__findnew_thread+0xee) [0x4bbe0e] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] Refcount +1 => 2 at ./perf(thread__get+0x2c) [0x4c8bcc] ./perf(machine__findnew_thread+0x112) [0x4bbe32] ./perf(perf_session__register_idle_thread+0x28) [0x4c63c8] ./perf(cmd_top+0xd7d) [0x43cf6d] ./perf() [0x47ba35] ./perf(main+0x617) [0x4225b7] /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f06027c5af5] ./perf() [0x42272d] ---- Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20151209021122.10245.69707.stgit@localhost.localdomain [ Drop the refcount in perf_session__register_idle_thread() ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-12-09 10:11:23 +08:00
if (perf_session__register_idle_thread(session) < 0)
return -ENOMEM;
if (perf_data__is_pipe(session->data))
return __perf_session__process_pipe_events(session);
return __perf_session__process_events(session);
}
bool perf_session__has_traces(struct perf_session *session, const char *msg)
{
struct evsel *evsel;
evlist__for_each_entry(session->evlist, evsel) {
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 19:24:29 +08:00
if (evsel->core.attr.type == PERF_TYPE_TRACEPOINT)
return true;
}
pr_err("No trace sample to read. Did you call 'perf %s'?\n", msg);
return false;
}
perf tools: Handle relocatable kernels DSOs don't have this problem because the kernel emits a PERF_MMAP for each new executable mapping it performs on monitored threads. To fix the kernel case we simulate the same behaviour, by having 'perf record' to synthesize a PERF_MMAP for the kernel, encoded like this: [root@doppio ~]# perf record -a -f sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.344 MB perf.data (~15038 samples) ] [root@doppio ~]# perf report -D | head -10 0xd0 [0x40]: event: 1 . . ... raw event: size 64 bytes . 0000: 01 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 ......@........ . 0010: 00 00 00 81 ff ff ff ff 00 00 00 00 00 00 00 00 ............... . 0020: 00 00 00 00 00 00 00 00 5b 6b 65 72 6e 65 6c 2e ........ [kernel . 0030: 6b 61 6c 6c 73 79 6d 73 2e 5f 74 65 78 74 5d 00 kallsyms._text] . 0xd0 [0x40]: PERF_RECORD_MMAP 0/0: [0xffffffff81000000((nil)) @ (nil)]: [kernel.kallsyms._text] I.e. we identify such event as having: .pid = 0 .filename = [kernel.kallsyms.REFNAME] .start = REFNAME addr in /proc/kallsyms at 'perf record' time and use now a hardcoded value of '.text' for REFNAME. Then, later, in 'perf report', if there are any kernel hits and thus we need to resolve kernel symbols, we search for REFNAME and if its address changed, relocation happened and we thus must change the kernel mapping routines to one that uses .pgoff as the relocation to apply. This way we use the same mechanism used for the other DSOs and don't have to do a two pass in all the kernel symbols. Reported-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> LKML-Reference: <1262717431-1246-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 02:50:31 +08:00
int map__set_kallsyms_ref_reloc_sym(struct map *map, const char *symbol_name, u64 addr)
perf tools: Handle relocatable kernels DSOs don't have this problem because the kernel emits a PERF_MMAP for each new executable mapping it performs on monitored threads. To fix the kernel case we simulate the same behaviour, by having 'perf record' to synthesize a PERF_MMAP for the kernel, encoded like this: [root@doppio ~]# perf record -a -f sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.344 MB perf.data (~15038 samples) ] [root@doppio ~]# perf report -D | head -10 0xd0 [0x40]: event: 1 . . ... raw event: size 64 bytes . 0000: 01 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 ......@........ . 0010: 00 00 00 81 ff ff ff ff 00 00 00 00 00 00 00 00 ............... . 0020: 00 00 00 00 00 00 00 00 5b 6b 65 72 6e 65 6c 2e ........ [kernel . 0030: 6b 61 6c 6c 73 79 6d 73 2e 5f 74 65 78 74 5d 00 kallsyms._text] . 0xd0 [0x40]: PERF_RECORD_MMAP 0/0: [0xffffffff81000000((nil)) @ (nil)]: [kernel.kallsyms._text] I.e. we identify such event as having: .pid = 0 .filename = [kernel.kallsyms.REFNAME] .start = REFNAME addr in /proc/kallsyms at 'perf record' time and use now a hardcoded value of '.text' for REFNAME. Then, later, in 'perf report', if there are any kernel hits and thus we need to resolve kernel symbols, we search for REFNAME and if its address changed, relocation happened and we thus must change the kernel mapping routines to one that uses .pgoff as the relocation to apply. This way we use the same mechanism used for the other DSOs and don't have to do a two pass in all the kernel symbols. Reported-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> LKML-Reference: <1262717431-1246-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 02:50:31 +08:00
{
char *bracket;
struct ref_reloc_sym *ref;
struct kmap *kmap;
ref = zalloc(sizeof(struct ref_reloc_sym));
if (ref == NULL)
return -ENOMEM;
perf tools: Handle relocatable kernels DSOs don't have this problem because the kernel emits a PERF_MMAP for each new executable mapping it performs on monitored threads. To fix the kernel case we simulate the same behaviour, by having 'perf record' to synthesize a PERF_MMAP for the kernel, encoded like this: [root@doppio ~]# perf record -a -f sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.344 MB perf.data (~15038 samples) ] [root@doppio ~]# perf report -D | head -10 0xd0 [0x40]: event: 1 . . ... raw event: size 64 bytes . 0000: 01 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 ......@........ . 0010: 00 00 00 81 ff ff ff ff 00 00 00 00 00 00 00 00 ............... . 0020: 00 00 00 00 00 00 00 00 5b 6b 65 72 6e 65 6c 2e ........ [kernel . 0030: 6b 61 6c 6c 73 79 6d 73 2e 5f 74 65 78 74 5d 00 kallsyms._text] . 0xd0 [0x40]: PERF_RECORD_MMAP 0/0: [0xffffffff81000000((nil)) @ (nil)]: [kernel.kallsyms._text] I.e. we identify such event as having: .pid = 0 .filename = [kernel.kallsyms.REFNAME] .start = REFNAME addr in /proc/kallsyms at 'perf record' time and use now a hardcoded value of '.text' for REFNAME. Then, later, in 'perf report', if there are any kernel hits and thus we need to resolve kernel symbols, we search for REFNAME and if its address changed, relocation happened and we thus must change the kernel mapping routines to one that uses .pgoff as the relocation to apply. This way we use the same mechanism used for the other DSOs and don't have to do a two pass in all the kernel symbols. Reported-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> LKML-Reference: <1262717431-1246-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 02:50:31 +08:00
ref->name = strdup(symbol_name);
if (ref->name == NULL) {
free(ref);
perf tools: Handle relocatable kernels DSOs don't have this problem because the kernel emits a PERF_MMAP for each new executable mapping it performs on monitored threads. To fix the kernel case we simulate the same behaviour, by having 'perf record' to synthesize a PERF_MMAP for the kernel, encoded like this: [root@doppio ~]# perf record -a -f sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.344 MB perf.data (~15038 samples) ] [root@doppio ~]# perf report -D | head -10 0xd0 [0x40]: event: 1 . . ... raw event: size 64 bytes . 0000: 01 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 ......@........ . 0010: 00 00 00 81 ff ff ff ff 00 00 00 00 00 00 00 00 ............... . 0020: 00 00 00 00 00 00 00 00 5b 6b 65 72 6e 65 6c 2e ........ [kernel . 0030: 6b 61 6c 6c 73 79 6d 73 2e 5f 74 65 78 74 5d 00 kallsyms._text] . 0xd0 [0x40]: PERF_RECORD_MMAP 0/0: [0xffffffff81000000((nil)) @ (nil)]: [kernel.kallsyms._text] I.e. we identify such event as having: .pid = 0 .filename = [kernel.kallsyms.REFNAME] .start = REFNAME addr in /proc/kallsyms at 'perf record' time and use now a hardcoded value of '.text' for REFNAME. Then, later, in 'perf report', if there are any kernel hits and thus we need to resolve kernel symbols, we search for REFNAME and if its address changed, relocation happened and we thus must change the kernel mapping routines to one that uses .pgoff as the relocation to apply. This way we use the same mechanism used for the other DSOs and don't have to do a two pass in all the kernel symbols. Reported-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> LKML-Reference: <1262717431-1246-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 02:50:31 +08:00
return -ENOMEM;
}
perf tools: Handle relocatable kernels DSOs don't have this problem because the kernel emits a PERF_MMAP for each new executable mapping it performs on monitored threads. To fix the kernel case we simulate the same behaviour, by having 'perf record' to synthesize a PERF_MMAP for the kernel, encoded like this: [root@doppio ~]# perf record -a -f sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.344 MB perf.data (~15038 samples) ] [root@doppio ~]# perf report -D | head -10 0xd0 [0x40]: event: 1 . . ... raw event: size 64 bytes . 0000: 01 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 ......@........ . 0010: 00 00 00 81 ff ff ff ff 00 00 00 00 00 00 00 00 ............... . 0020: 00 00 00 00 00 00 00 00 5b 6b 65 72 6e 65 6c 2e ........ [kernel . 0030: 6b 61 6c 6c 73 79 6d 73 2e 5f 74 65 78 74 5d 00 kallsyms._text] . 0xd0 [0x40]: PERF_RECORD_MMAP 0/0: [0xffffffff81000000((nil)) @ (nil)]: [kernel.kallsyms._text] I.e. we identify such event as having: .pid = 0 .filename = [kernel.kallsyms.REFNAME] .start = REFNAME addr in /proc/kallsyms at 'perf record' time and use now a hardcoded value of '.text' for REFNAME. Then, later, in 'perf report', if there are any kernel hits and thus we need to resolve kernel symbols, we search for REFNAME and if its address changed, relocation happened and we thus must change the kernel mapping routines to one that uses .pgoff as the relocation to apply. This way we use the same mechanism used for the other DSOs and don't have to do a two pass in all the kernel symbols. Reported-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> LKML-Reference: <1262717431-1246-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 02:50:31 +08:00
bracket = strchr(ref->name, ']');
perf tools: Handle relocatable kernels DSOs don't have this problem because the kernel emits a PERF_MMAP for each new executable mapping it performs on monitored threads. To fix the kernel case we simulate the same behaviour, by having 'perf record' to synthesize a PERF_MMAP for the kernel, encoded like this: [root@doppio ~]# perf record -a -f sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.344 MB perf.data (~15038 samples) ] [root@doppio ~]# perf report -D | head -10 0xd0 [0x40]: event: 1 . . ... raw event: size 64 bytes . 0000: 01 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 ......@........ . 0010: 00 00 00 81 ff ff ff ff 00 00 00 00 00 00 00 00 ............... . 0020: 00 00 00 00 00 00 00 00 5b 6b 65 72 6e 65 6c 2e ........ [kernel . 0030: 6b 61 6c 6c 73 79 6d 73 2e 5f 74 65 78 74 5d 00 kallsyms._text] . 0xd0 [0x40]: PERF_RECORD_MMAP 0/0: [0xffffffff81000000((nil)) @ (nil)]: [kernel.kallsyms._text] I.e. we identify such event as having: .pid = 0 .filename = [kernel.kallsyms.REFNAME] .start = REFNAME addr in /proc/kallsyms at 'perf record' time and use now a hardcoded value of '.text' for REFNAME. Then, later, in 'perf report', if there are any kernel hits and thus we need to resolve kernel symbols, we search for REFNAME and if its address changed, relocation happened and we thus must change the kernel mapping routines to one that uses .pgoff as the relocation to apply. This way we use the same mechanism used for the other DSOs and don't have to do a two pass in all the kernel symbols. Reported-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> LKML-Reference: <1262717431-1246-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 02:50:31 +08:00
if (bracket)
*bracket = '\0';
ref->addr = addr;
kmap = map__kmap(map);
if (kmap)
kmap->ref_reloc_sym = ref;
perf tools: Handle relocatable kernels DSOs don't have this problem because the kernel emits a PERF_MMAP for each new executable mapping it performs on monitored threads. To fix the kernel case we simulate the same behaviour, by having 'perf record' to synthesize a PERF_MMAP for the kernel, encoded like this: [root@doppio ~]# perf record -a -f sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.344 MB perf.data (~15038 samples) ] [root@doppio ~]# perf report -D | head -10 0xd0 [0x40]: event: 1 . . ... raw event: size 64 bytes . 0000: 01 00 00 00 00 00 40 00 00 00 00 00 00 00 00 00 ......@........ . 0010: 00 00 00 81 ff ff ff ff 00 00 00 00 00 00 00 00 ............... . 0020: 00 00 00 00 00 00 00 00 5b 6b 65 72 6e 65 6c 2e ........ [kernel . 0030: 6b 61 6c 6c 73 79 6d 73 2e 5f 74 65 78 74 5d 00 kallsyms._text] . 0xd0 [0x40]: PERF_RECORD_MMAP 0/0: [0xffffffff81000000((nil)) @ (nil)]: [kernel.kallsyms._text] I.e. we identify such event as having: .pid = 0 .filename = [kernel.kallsyms.REFNAME] .start = REFNAME addr in /proc/kallsyms at 'perf record' time and use now a hardcoded value of '.text' for REFNAME. Then, later, in 'perf report', if there are any kernel hits and thus we need to resolve kernel symbols, we search for REFNAME and if its address changed, relocation happened and we thus must change the kernel mapping routines to one that uses .pgoff as the relocation to apply. This way we use the same mechanism used for the other DSOs and don't have to do a two pass in all the kernel symbols. Reported-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> LKML-Reference: <1262717431-1246-1-git-send-email-acme@infradead.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-06 02:50:31 +08:00
return 0;
}
size_t perf_session__fprintf_dsos(struct perf_session *session, FILE *fp)
{
return machines__fprintf_dsos(&session->machines, fp);
}
size_t perf_session__fprintf_dsos_buildid(struct perf_session *session, FILE *fp,
bool (skip)(struct dso *dso, int parm), int parm)
{
return machines__fprintf_dsos_buildid(&session->machines, fp, skip, parm);
}
size_t perf_session__fprintf_nr_events(struct perf_session *session, FILE *fp)
{
size_t ret;
const char *msg = "";
if (perf_header__has_feat(&session->header, HEADER_AUXTRACE))
msg = " (excludes AUX area (e.g. instruction trace) decoded / synthesized events)";
ret = fprintf(fp, "\nAggregated stats:%s\n", msg);
ret += events_stats__fprintf(&session->evlist->stats, fp);
return ret;
}
perf script: Add support for dumping symbols Add option to dump symbols found in events. e.g., perf script -f comm,pid,tid,time,trace,sym swapper 0/0 537.037184: prev_comm=swapper prev_pid=0 prev_prio=120... ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms]) ffffffff81382ac5 schedule ([kernel.kallsyms]) ffffffff8100134a cpu_idle ([kernel.kallsyms]) ffffffff81370b39 rest_init ([kernel.kallsyms]) ffffffff81696c23 start_kernel ([kernel.kallsyms].init.text) ffffffff816962af x86_64_start_reservations ([kernel.kallsyms].init.text) ffffffff816963b9 x86_64_start_kernel ([kernel.kallsyms].init.text) sshd 1675/1675 537.037309: prev_comm=sshd prev_pid=1675 prev_prio=120... ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms]) ffffffff81382ac5 schedule ([kernel.kallsyms]) ffffffff813837aa schedule_hrtimeout_range_clock ([kernel.kallsyms]) ffffffff81383886 schedule_hrtimeout_range ([kernel.kallsyms]) ffffffff8110c4f9 poll_schedule_timeout ([kernel.kallsyms]) ffffffff8110cd20 do_select ([kernel.kallsyms]) ffffffff8110ced8 core_sys_select ([kernel.kallsyms]) ffffffff8110d00d sys_select ([kernel.kallsyms]) ffffffff81002bc2 system_call ([kernel.kallsyms]) 7f1647e56e93 __GI_select (/lib64/libc-2.12.90.so) netstat 1692/1692 537.038664: prev_comm=netstat prev_pid=1692 prev_prio=... ffffffff81030350 perf_trace_sched_switch ([kernel.kallsyms]) ffffffff81382ac5 schedule ([kernel.kallsyms]) ffffffff81002c3a sysret_careful ([kernel.kallsyms]) 7f7a6cd1b210 __GI___libc_read (/lib64/libc-2.12.90.so) Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <1299734608-5223-6-git-send-email-daahern@cisco.com> Signed-off-by: David Ahern <daahern@cisco.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-03-10 13:23:27 +08:00
size_t perf_session__fprintf(struct perf_session *session, FILE *fp)
{
/*
* FIXME: Here we have to actually print all the machines in this
* session, not just the host...
*/
return machine__fprintf(&session->machines.host, fp);
}
struct evsel *perf_session__find_first_evtype(struct perf_session *session,
unsigned int type)
{
struct evsel *pos;
evlist__for_each_entry(session->evlist, pos) {
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 19:24:29 +08:00
if (pos->core.attr.type == type)
return pos;
}
return NULL;
}
int perf_session__cpu_bitmap(struct perf_session *session,
const char *cpu_list, unsigned long *cpu_bitmap)
{
int i, err = -1;
struct perf_cpu_map *map;
int nr_cpus = min(session->header.env.nr_cpus_online, MAX_NR_CPUS);
for (i = 0; i < PERF_TYPE_MAX; ++i) {
struct evsel *evsel;
evsel = perf_session__find_first_evtype(session, i);
if (!evsel)
continue;
libperf: Move perf_event_attr field from perf's evsel to libperf's perf_evsel Move the perf_event_attr struct fron 'struct evsel' to 'struct perf_evsel'. Committer notes: Fixed up these: tools/perf/arch/arm/util/auxtrace.c tools/perf/arch/arm/util/cs-etm.c tools/perf/arch/arm64/util/arm-spe.c tools/perf/arch/s390/util/auxtrace.c tools/perf/util/cs-etm.c Also cc1: warnings being treated as errors tests/sample-parsing.c: In function 'do_test': tests/sample-parsing.c:162: error: missing initializer tests/sample-parsing.c:162: error: (near initialization for 'evsel.core.cpus') struct evsel evsel = { .needs_swap = false, - .core.attr = { - .sample_type = sample_type, - .read_format = read_format, + .core = { + . attr = { + .sample_type = sample_type, + .read_format = read_format, + }, [perfbuilder@a70e4eeb5549 /]$ gcc --version |& head -1 gcc (GCC) 4.4.7 Also we don't need to include perf_event.h in tools/perf/lib/include/perf/evsel.h, forward declaring 'struct perf_event_attr' is enough. And this even fixes the build in some systems where things are used somewhere down the include path from perf_event.h without defining __always_inline. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20190721112506.12306-43-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-07-21 19:24:29 +08:00
if (!(evsel->core.attr.sample_type & PERF_SAMPLE_CPU)) {
pr_err("File does not contain CPU events. "
"Remove -C option to proceed.\n");
return -1;
}
}
map = perf_cpu_map__new(cpu_list);
if (map == NULL) {
pr_err("Invalid cpu_list\n");
return -1;
}
for (i = 0; i < map->nr; i++) {
int cpu = map->map[i];
if (cpu >= nr_cpus) {
pr_err("Requested CPU %d too large. "
"Consider raising MAX_NR_CPUS\n", cpu);
goto out_delete_map;
}
set_bit(cpu, cpu_bitmap);
}
err = 0;
out_delete_map:
perf_cpu_map__put(map);
return err;
}
perf tools: Make perf.data more self-descriptive (v8) The goal of this patch is to include more information about the host environment into the perf.data so it is more self-descriptive. Overtime, profiles are captured on various machines and it becomes hard to track what was recorded, on what machine and when. This patch provides a way to solve this by extending the perf.data file with basic information about the host machine. To add those extensions, we leverage the feature bits capabilities of the perf.data format. The change is backward compatible with existing perf.data files. We define the following useful new extensions: - HEADER_HOSTNAME: the hostname - HEADER_OSRELEASE: the kernel release number - HEADER_ARCH: the hw architecture - HEADER_CPUDESC: generic CPU description - HEADER_NRCPUS: number of online/avail cpus - HEADER_CMDLINE: perf command line - HEADER_VERSION: perf version - HEADER_TOPOLOGY: cpu topology - HEADER_EVENT_DESC: full event description (attrs) - HEADER_CPUID: easy-to-parse low level CPU identication The small granularity for the entries is to make it easier to extend without breaking backward compatiblity. Many entries are provided as ASCII strings. Perf report/script have been modified to print the basic information as easy-to-parse ASCII strings. Extended information about CPU and NUMA topology may be requested with the -I option. Thanks to David Ahern for reviewing and testing the many versions of this patch. $ perf report --stdio # ======== # captured on : Mon Sep 26 15:22:14 2011 # hostname : quad # os release : 3.1.0-rc4-tip # perf version : 3.1.0-rc4 # arch : x86_64 # nrcpus online : 4 # nrcpus avail : 4 # cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz # cpuid : GenuineIntel,6,15,11 # total memory : 8105360 kB # cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date # event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31, # HEADER_CPU_TOPOLOGY info available, use -I to display # HEADER_NUMA_TOPOLOGY info available, use -I to display # ======== # ... $ perf report --stdio -I # ======== # captured on : Mon Sep 26 15:22:14 2011 # hostname : quad # os release : 3.1.0-rc4-tip # perf version : 3.1.0-rc4 # arch : x86_64 # nrcpus online : 4 # nrcpus avail : 4 # cpudesc : Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz # cpuid : GenuineIntel,6,15,11 # total memory : 8105360 kB # cmdline : /home/eranian/perfmon/official/tip/build/tools/perf/perf record date # event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, id = { 29, 30, 31, # sibling cores : 0-3 # sibling threads : 0 # sibling threads : 1 # sibling threads : 2 # sibling threads : 3 # node0 meminfo : total = 8320608 kB, free = 7571024 kB # node0 cpu list : 0-3 # ======== # ... Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: David Ahern <dsahern@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20110930134040.GA5575@quad Signed-off-by: Stephane Eranian <eranian@google.com> [ committer notes: Use --show-info in the tools as was in the docs, rename perf_header_fprintf_info to perf_file_section__fprintf_info, fixup conflict with f69b64f7 "perf: Support setting the disassembler style" ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2011-09-30 21:40:40 +08:00
void perf_session__fprintf_info(struct perf_session *session, FILE *fp,
bool full)
{
if (session == NULL || fp == NULL)
return;
fprintf(fp, "# ========\n");
perf_header__fprintf_info(session, fp, full);
fprintf(fp, "# ========\n#\n");
}
int perf_event__process_id_index(struct perf_session *session,
union perf_event *event)
perf tools: Add id index Add an index of the event identifiers, in preparation for Intel PT. The event id (also called the sample id) is a unique number allocated by the kernel to the event created by perf_event_open(). Events can include the event id by having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER. Currently the main use of the event id is to match an event back to the evsel to which it belongs i.e. perf_evlist__id2evsel() The purpose of this patch is to make it possible to match an event back to the mmap from which it was read. The reason that is useful is because the mmap represents a time-ordered context (either for a cpu or for a thread). Intel PT decodes trace information on that basis. In full-trace mode, that information can be recorded when the Intel PT trace is read, but in sample-mode the Intel PT trace data is embedded in a sample and it is in that case that the "id index" is needed. So the mmaps are numbered (idx) and the cpu and tid recorded against the id by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel(). That information is recorded on the perf.data file in the new "id index". idx, cpu and tid are added to struct perf_sample_id (which is the node of evlist's hash table to match ids to evsels). The information can be retrieved using perf_evlist__id2sid(). Note however this all depends on having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER, otherwise ids are not recorded. The "id index" is a synthesized event record which will be created when Intel PT sampling is used by calling perf_event__synthesize_id_index(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1414417770-18602-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-27 21:49:22 +08:00
{
struct evlist *evlist = session->evlist;
struct perf_record_id_index *ie = &event->id_index;
perf tools: Add id index Add an index of the event identifiers, in preparation for Intel PT. The event id (also called the sample id) is a unique number allocated by the kernel to the event created by perf_event_open(). Events can include the event id by having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER. Currently the main use of the event id is to match an event back to the evsel to which it belongs i.e. perf_evlist__id2evsel() The purpose of this patch is to make it possible to match an event back to the mmap from which it was read. The reason that is useful is because the mmap represents a time-ordered context (either for a cpu or for a thread). Intel PT decodes trace information on that basis. In full-trace mode, that information can be recorded when the Intel PT trace is read, but in sample-mode the Intel PT trace data is embedded in a sample and it is in that case that the "id index" is needed. So the mmaps are numbered (idx) and the cpu and tid recorded against the id by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel(). That information is recorded on the perf.data file in the new "id index". idx, cpu and tid are added to struct perf_sample_id (which is the node of evlist's hash table to match ids to evsels). The information can be retrieved using perf_evlist__id2sid(). Note however this all depends on having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER, otherwise ids are not recorded. The "id index" is a synthesized event record which will be created when Intel PT sampling is used by calling perf_event__synthesize_id_index(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1414417770-18602-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-27 21:49:22 +08:00
size_t i, nr, max_nr;
max_nr = (ie->header.size - sizeof(struct perf_record_id_index)) /
perf tools: Add id index Add an index of the event identifiers, in preparation for Intel PT. The event id (also called the sample id) is a unique number allocated by the kernel to the event created by perf_event_open(). Events can include the event id by having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER. Currently the main use of the event id is to match an event back to the evsel to which it belongs i.e. perf_evlist__id2evsel() The purpose of this patch is to make it possible to match an event back to the mmap from which it was read. The reason that is useful is because the mmap represents a time-ordered context (either for a cpu or for a thread). Intel PT decodes trace information on that basis. In full-trace mode, that information can be recorded when the Intel PT trace is read, but in sample-mode the Intel PT trace data is embedded in a sample and it is in that case that the "id index" is needed. So the mmaps are numbered (idx) and the cpu and tid recorded against the id by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel(). That information is recorded on the perf.data file in the new "id index". idx, cpu and tid are added to struct perf_sample_id (which is the node of evlist's hash table to match ids to evsels). The information can be retrieved using perf_evlist__id2sid(). Note however this all depends on having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER, otherwise ids are not recorded. The "id index" is a synthesized event record which will be created when Intel PT sampling is used by calling perf_event__synthesize_id_index(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1414417770-18602-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-27 21:49:22 +08:00
sizeof(struct id_index_entry);
nr = ie->nr;
if (nr > max_nr)
return -EINVAL;
if (dump_trace)
fprintf(stdout, " nr: %zu\n", nr);
for (i = 0; i < nr; i++) {
struct id_index_entry *e = &ie->entries[i];
struct perf_sample_id *sid;
if (dump_trace) {
fprintf(stdout, " ... id: %"PRI_lu64, e->id);
fprintf(stdout, " idx: %"PRI_lu64, e->idx);
fprintf(stdout, " cpu: %"PRI_ld64, e->cpu);
fprintf(stdout, " tid: %"PRI_ld64"\n", e->tid);
perf tools: Add id index Add an index of the event identifiers, in preparation for Intel PT. The event id (also called the sample id) is a unique number allocated by the kernel to the event created by perf_event_open(). Events can include the event id by having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER. Currently the main use of the event id is to match an event back to the evsel to which it belongs i.e. perf_evlist__id2evsel() The purpose of this patch is to make it possible to match an event back to the mmap from which it was read. The reason that is useful is because the mmap represents a time-ordered context (either for a cpu or for a thread). Intel PT decodes trace information on that basis. In full-trace mode, that information can be recorded when the Intel PT trace is read, but in sample-mode the Intel PT trace data is embedded in a sample and it is in that case that the "id index" is needed. So the mmaps are numbered (idx) and the cpu and tid recorded against the id by perf_evlist__set_sid_idx() which is called by perf_evlist__mmap_per_evsel(). That information is recorded on the perf.data file in the new "id index". idx, cpu and tid are added to struct perf_sample_id (which is the node of evlist's hash table to match ids to evsels). The information can be retrieved using perf_evlist__id2sid(). Note however this all depends on having a sample type including PERF_SAMPLE_ID or PERF_SAMPLE_IDENTIFIER, otherwise ids are not recorded. The "id index" is a synthesized event record which will be created when Intel PT sampling is used by calling perf_event__synthesize_id_index(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1414417770-18602-2-git-send-email-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-27 21:49:22 +08:00
}
sid = perf_evlist__id2sid(evlist, e->id);
if (!sid)
return -ENOENT;
sid->idx = e->idx;
sid->cpu = e->cpu;
sid->tid = e->tid;
}
return 0;
}