OpenCloudOS-Kernel/drivers/gpu/drm/mediatek/mtk_dpi.c

760 lines
19 KiB
C
Raw Normal View History

/*
* Copyright (c) 2014 MediaTek Inc.
* Author: Jie Qiu <jie.qiu@mediatek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <linux/kernel.h>
#include <linux/component.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_graph.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/clk.h>
#include <video/videomode.h>
#include "mtk_dpi_regs.h"
#include "mtk_drm_ddp_comp.h"
enum mtk_dpi_out_bit_num {
MTK_DPI_OUT_BIT_NUM_8BITS,
MTK_DPI_OUT_BIT_NUM_10BITS,
MTK_DPI_OUT_BIT_NUM_12BITS,
MTK_DPI_OUT_BIT_NUM_16BITS
};
enum mtk_dpi_out_yc_map {
MTK_DPI_OUT_YC_MAP_RGB,
MTK_DPI_OUT_YC_MAP_CYCY,
MTK_DPI_OUT_YC_MAP_YCYC,
MTK_DPI_OUT_YC_MAP_CY,
MTK_DPI_OUT_YC_MAP_YC
};
enum mtk_dpi_out_channel_swap {
MTK_DPI_OUT_CHANNEL_SWAP_RGB,
MTK_DPI_OUT_CHANNEL_SWAP_GBR,
MTK_DPI_OUT_CHANNEL_SWAP_BRG,
MTK_DPI_OUT_CHANNEL_SWAP_RBG,
MTK_DPI_OUT_CHANNEL_SWAP_GRB,
MTK_DPI_OUT_CHANNEL_SWAP_BGR
};
enum mtk_dpi_out_color_format {
MTK_DPI_COLOR_FORMAT_RGB,
MTK_DPI_COLOR_FORMAT_RGB_FULL,
MTK_DPI_COLOR_FORMAT_YCBCR_444,
MTK_DPI_COLOR_FORMAT_YCBCR_422,
MTK_DPI_COLOR_FORMAT_XV_YCC,
MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL,
MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL
};
struct mtk_dpi {
struct mtk_ddp_comp ddp_comp;
struct drm_encoder encoder;
struct drm_bridge *bridge;
void __iomem *regs;
struct device *dev;
struct clk *engine_clk;
struct clk *pixel_clk;
struct clk *tvd_clk;
int irq;
struct drm_display_mode mode;
const struct mtk_dpi_conf *conf;
enum mtk_dpi_out_color_format color_format;
enum mtk_dpi_out_yc_map yc_map;
enum mtk_dpi_out_bit_num bit_num;
enum mtk_dpi_out_channel_swap channel_swap;
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
int refcount;
};
static inline struct mtk_dpi *mtk_dpi_from_encoder(struct drm_encoder *e)
{
return container_of(e, struct mtk_dpi, encoder);
}
enum mtk_dpi_polarity {
MTK_DPI_POLARITY_RISING,
MTK_DPI_POLARITY_FALLING,
};
struct mtk_dpi_polarities {
enum mtk_dpi_polarity de_pol;
enum mtk_dpi_polarity ck_pol;
enum mtk_dpi_polarity hsync_pol;
enum mtk_dpi_polarity vsync_pol;
};
struct mtk_dpi_sync_param {
u32 sync_width;
u32 front_porch;
u32 back_porch;
bool shift_half_line;
};
struct mtk_dpi_yc_limit {
u16 y_top;
u16 y_bottom;
u16 c_top;
u16 c_bottom;
};
struct mtk_dpi_conf {
u32 reg_h_fre_con;
};
static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
{
u32 tmp = readl(dpi->regs + offset) & ~mask;
tmp |= (val & mask);
writel(tmp, dpi->regs + offset);
}
static void mtk_dpi_sw_reset(struct mtk_dpi *dpi, bool reset)
{
mtk_dpi_mask(dpi, DPI_RET, reset ? RST : 0, RST);
}
static void mtk_dpi_enable(struct mtk_dpi *dpi)
{
mtk_dpi_mask(dpi, DPI_EN, EN, EN);
}
static void mtk_dpi_disable(struct mtk_dpi *dpi)
{
mtk_dpi_mask(dpi, DPI_EN, 0, EN);
}
static void mtk_dpi_config_hsync(struct mtk_dpi *dpi,
struct mtk_dpi_sync_param *sync)
{
mtk_dpi_mask(dpi, DPI_TGEN_HWIDTH,
sync->sync_width << HPW, HPW_MASK);
mtk_dpi_mask(dpi, DPI_TGEN_HPORCH,
sync->back_porch << HBP, HBP_MASK);
mtk_dpi_mask(dpi, DPI_TGEN_HPORCH, sync->front_porch << HFP,
HFP_MASK);
}
static void mtk_dpi_config_vsync(struct mtk_dpi *dpi,
struct mtk_dpi_sync_param *sync,
u32 width_addr, u32 porch_addr)
{
mtk_dpi_mask(dpi, width_addr,
sync->sync_width << VSYNC_WIDTH_SHIFT,
VSYNC_WIDTH_MASK);
mtk_dpi_mask(dpi, width_addr,
sync->shift_half_line << VSYNC_HALF_LINE_SHIFT,
VSYNC_HALF_LINE_MASK);
mtk_dpi_mask(dpi, porch_addr,
sync->back_porch << VSYNC_BACK_PORCH_SHIFT,
VSYNC_BACK_PORCH_MASK);
mtk_dpi_mask(dpi, porch_addr,
sync->front_porch << VSYNC_FRONT_PORCH_SHIFT,
VSYNC_FRONT_PORCH_MASK);
}
static void mtk_dpi_config_vsync_lodd(struct mtk_dpi *dpi,
struct mtk_dpi_sync_param *sync)
{
mtk_dpi_config_vsync(dpi, sync, DPI_TGEN_VWIDTH, DPI_TGEN_VPORCH);
}
static void mtk_dpi_config_vsync_leven(struct mtk_dpi *dpi,
struct mtk_dpi_sync_param *sync)
{
mtk_dpi_config_vsync(dpi, sync, DPI_TGEN_VWIDTH_LEVEN,
DPI_TGEN_VPORCH_LEVEN);
}
static void mtk_dpi_config_vsync_rodd(struct mtk_dpi *dpi,
struct mtk_dpi_sync_param *sync)
{
mtk_dpi_config_vsync(dpi, sync, DPI_TGEN_VWIDTH_RODD,
DPI_TGEN_VPORCH_RODD);
}
static void mtk_dpi_config_vsync_reven(struct mtk_dpi *dpi,
struct mtk_dpi_sync_param *sync)
{
mtk_dpi_config_vsync(dpi, sync, DPI_TGEN_VWIDTH_REVEN,
DPI_TGEN_VPORCH_REVEN);
}
static void mtk_dpi_config_pol(struct mtk_dpi *dpi,
struct mtk_dpi_polarities *dpi_pol)
{
unsigned int pol;
pol = (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ? 0 : CK_POL) |
(dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ? 0 : DE_POL) |
(dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 : HSYNC_POL) |
(dpi_pol->vsync_pol == MTK_DPI_POLARITY_RISING ? 0 : VSYNC_POL);
mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol,
CK_POL | DE_POL | HSYNC_POL | VSYNC_POL);
}
static void mtk_dpi_config_3d(struct mtk_dpi *dpi, bool en_3d)
{
mtk_dpi_mask(dpi, DPI_CON, en_3d ? TDFP_EN : 0, TDFP_EN);
}
static void mtk_dpi_config_interface(struct mtk_dpi *dpi, bool inter)
{
mtk_dpi_mask(dpi, DPI_CON, inter ? INTL_EN : 0, INTL_EN);
}
static void mtk_dpi_config_fb_size(struct mtk_dpi *dpi, u32 width, u32 height)
{
mtk_dpi_mask(dpi, DPI_SIZE, width << HSIZE, HSIZE_MASK);
mtk_dpi_mask(dpi, DPI_SIZE, height << VSIZE, VSIZE_MASK);
}
static void mtk_dpi_config_channel_limit(struct mtk_dpi *dpi,
struct mtk_dpi_yc_limit *limit)
{
mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit->y_bottom << Y_LIMINT_BOT,
Y_LIMINT_BOT_MASK);
mtk_dpi_mask(dpi, DPI_Y_LIMIT, limit->y_top << Y_LIMINT_TOP,
Y_LIMINT_TOP_MASK);
mtk_dpi_mask(dpi, DPI_C_LIMIT, limit->c_bottom << C_LIMIT_BOT,
C_LIMIT_BOT_MASK);
mtk_dpi_mask(dpi, DPI_C_LIMIT, limit->c_top << C_LIMIT_TOP,
C_LIMIT_TOP_MASK);
}
static void mtk_dpi_config_bit_num(struct mtk_dpi *dpi,
enum mtk_dpi_out_bit_num num)
{
u32 val;
switch (num) {
case MTK_DPI_OUT_BIT_NUM_8BITS:
val = OUT_BIT_8;
break;
case MTK_DPI_OUT_BIT_NUM_10BITS:
val = OUT_BIT_10;
break;
case MTK_DPI_OUT_BIT_NUM_12BITS:
val = OUT_BIT_12;
break;
case MTK_DPI_OUT_BIT_NUM_16BITS:
val = OUT_BIT_16;
break;
default:
val = OUT_BIT_8;
break;
}
mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, val << OUT_BIT,
OUT_BIT_MASK);
}
static void mtk_dpi_config_yc_map(struct mtk_dpi *dpi,
enum mtk_dpi_out_yc_map map)
{
u32 val;
switch (map) {
case MTK_DPI_OUT_YC_MAP_RGB:
val = YC_MAP_RGB;
break;
case MTK_DPI_OUT_YC_MAP_CYCY:
val = YC_MAP_CYCY;
break;
case MTK_DPI_OUT_YC_MAP_YCYC:
val = YC_MAP_YCYC;
break;
case MTK_DPI_OUT_YC_MAP_CY:
val = YC_MAP_CY;
break;
case MTK_DPI_OUT_YC_MAP_YC:
val = YC_MAP_YC;
break;
default:
val = YC_MAP_RGB;
break;
}
mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, val << YC_MAP, YC_MAP_MASK);
}
static void mtk_dpi_config_channel_swap(struct mtk_dpi *dpi,
enum mtk_dpi_out_channel_swap swap)
{
u32 val;
switch (swap) {
case MTK_DPI_OUT_CHANNEL_SWAP_RGB:
val = SWAP_RGB;
break;
case MTK_DPI_OUT_CHANNEL_SWAP_GBR:
val = SWAP_GBR;
break;
case MTK_DPI_OUT_CHANNEL_SWAP_BRG:
val = SWAP_BRG;
break;
case MTK_DPI_OUT_CHANNEL_SWAP_RBG:
val = SWAP_RBG;
break;
case MTK_DPI_OUT_CHANNEL_SWAP_GRB:
val = SWAP_GRB;
break;
case MTK_DPI_OUT_CHANNEL_SWAP_BGR:
val = SWAP_BGR;
break;
default:
val = SWAP_RGB;
break;
}
mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, val << CH_SWAP, CH_SWAP_MASK);
}
static void mtk_dpi_config_yuv422_enable(struct mtk_dpi *dpi, bool enable)
{
mtk_dpi_mask(dpi, DPI_CON, enable ? YUV422_EN : 0, YUV422_EN);
}
static void mtk_dpi_config_csc_enable(struct mtk_dpi *dpi, bool enable)
{
mtk_dpi_mask(dpi, DPI_CON, enable ? CSC_ENABLE : 0, CSC_ENABLE);
}
static void mtk_dpi_config_swap_input(struct mtk_dpi *dpi, bool enable)
{
mtk_dpi_mask(dpi, DPI_CON, enable ? IN_RB_SWAP : 0, IN_RB_SWAP);
}
static void mtk_dpi_config_2n_h_fre(struct mtk_dpi *dpi)
{
mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, H_FRE_2N, H_FRE_2N);
}
static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
enum mtk_dpi_out_color_format format)
{
if ((format == MTK_DPI_COLOR_FORMAT_YCBCR_444) ||
(format == MTK_DPI_COLOR_FORMAT_YCBCR_444_FULL)) {
mtk_dpi_config_yuv422_enable(dpi, false);
mtk_dpi_config_csc_enable(dpi, true);
mtk_dpi_config_swap_input(dpi, false);
mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_BGR);
} else if ((format == MTK_DPI_COLOR_FORMAT_YCBCR_422) ||
(format == MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL)) {
mtk_dpi_config_yuv422_enable(dpi, true);
mtk_dpi_config_csc_enable(dpi, true);
mtk_dpi_config_swap_input(dpi, true);
mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
} else {
mtk_dpi_config_yuv422_enable(dpi, false);
mtk_dpi_config_csc_enable(dpi, false);
mtk_dpi_config_swap_input(dpi, false);
mtk_dpi_config_channel_swap(dpi, MTK_DPI_OUT_CHANNEL_SWAP_RGB);
}
}
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
static void mtk_dpi_power_off(struct mtk_dpi *dpi)
{
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
if (WARN_ON(dpi->refcount == 0))
return;
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
if (--dpi->refcount != 0)
return;
mtk_dpi_disable(dpi);
clk_disable_unprepare(dpi->pixel_clk);
clk_disable_unprepare(dpi->engine_clk);
}
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
static int mtk_dpi_power_on(struct mtk_dpi *dpi)
{
int ret;
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
if (++dpi->refcount != 1)
return 0;
ret = clk_prepare_enable(dpi->engine_clk);
if (ret) {
dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret);
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
goto err_refcount;
}
ret = clk_prepare_enable(dpi->pixel_clk);
if (ret) {
dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret);
goto err_pixel;
}
mtk_dpi_enable(dpi);
return 0;
err_pixel:
clk_disable_unprepare(dpi->engine_clk);
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
err_refcount:
dpi->refcount--;
return ret;
}
static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
struct drm_display_mode *mode)
{
struct mtk_dpi_yc_limit limit;
struct mtk_dpi_polarities dpi_pol;
struct mtk_dpi_sync_param hsync;
struct mtk_dpi_sync_param vsync_lodd = { 0 };
struct mtk_dpi_sync_param vsync_leven = { 0 };
struct mtk_dpi_sync_param vsync_rodd = { 0 };
struct mtk_dpi_sync_param vsync_reven = { 0 };
struct videomode vm = { 0 };
unsigned long pll_rate;
unsigned int factor;
/* let pll_rate can fix the valid range of tvdpll (1G~2GHz) */
if (mode->clock <= 27000)
factor = 3 << 4;
else if (mode->clock <= 84000)
factor = 3 << 3;
else if (mode->clock <= 167000)
factor = 3 << 2;
else
factor = 3 << 1;
drm_display_mode_to_videomode(mode, &vm);
pll_rate = vm.pixelclock * factor;
dev_dbg(dpi->dev, "Want PLL %lu Hz, pixel clock %lu Hz\n",
pll_rate, vm.pixelclock);
clk_set_rate(dpi->tvd_clk, pll_rate);
pll_rate = clk_get_rate(dpi->tvd_clk);
vm.pixelclock = pll_rate / factor;
clk_set_rate(dpi->pixel_clk, vm.pixelclock);
vm.pixelclock = clk_get_rate(dpi->pixel_clk);
dev_dbg(dpi->dev, "Got PLL %lu Hz, pixel clock %lu Hz\n",
pll_rate, vm.pixelclock);
limit.c_bottom = 0x0010;
limit.c_top = 0x0FE0;
limit.y_bottom = 0x0010;
limit.y_top = 0x0FE0;
dpi_pol.ck_pol = MTK_DPI_POLARITY_FALLING;
dpi_pol.de_pol = MTK_DPI_POLARITY_RISING;
dpi_pol.hsync_pol = vm.flags & DISPLAY_FLAGS_HSYNC_HIGH ?
MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
dpi_pol.vsync_pol = vm.flags & DISPLAY_FLAGS_VSYNC_HIGH ?
MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
hsync.sync_width = vm.hsync_len;
hsync.back_porch = vm.hback_porch;
hsync.front_porch = vm.hfront_porch;
hsync.shift_half_line = false;
vsync_lodd.sync_width = vm.vsync_len;
vsync_lodd.back_porch = vm.vback_porch;
vsync_lodd.front_porch = vm.vfront_porch;
vsync_lodd.shift_half_line = false;
if (vm.flags & DISPLAY_FLAGS_INTERLACED &&
mode->flags & DRM_MODE_FLAG_3D_MASK) {
vsync_leven = vsync_lodd;
vsync_rodd = vsync_lodd;
vsync_reven = vsync_lodd;
vsync_leven.shift_half_line = true;
vsync_reven.shift_half_line = true;
} else if (vm.flags & DISPLAY_FLAGS_INTERLACED &&
!(mode->flags & DRM_MODE_FLAG_3D_MASK)) {
vsync_leven = vsync_lodd;
vsync_leven.shift_half_line = true;
} else if (!(vm.flags & DISPLAY_FLAGS_INTERLACED) &&
mode->flags & DRM_MODE_FLAG_3D_MASK) {
vsync_rodd = vsync_lodd;
}
mtk_dpi_sw_reset(dpi, true);
mtk_dpi_config_pol(dpi, &dpi_pol);
mtk_dpi_config_hsync(dpi, &hsync);
mtk_dpi_config_vsync_lodd(dpi, &vsync_lodd);
mtk_dpi_config_vsync_rodd(dpi, &vsync_rodd);
mtk_dpi_config_vsync_leven(dpi, &vsync_leven);
mtk_dpi_config_vsync_reven(dpi, &vsync_reven);
mtk_dpi_config_3d(dpi, !!(mode->flags & DRM_MODE_FLAG_3D_MASK));
mtk_dpi_config_interface(dpi, !!(vm.flags &
DISPLAY_FLAGS_INTERLACED));
if (vm.flags & DISPLAY_FLAGS_INTERLACED)
mtk_dpi_config_fb_size(dpi, vm.hactive, vm.vactive >> 1);
else
mtk_dpi_config_fb_size(dpi, vm.hactive, vm.vactive);
mtk_dpi_config_channel_limit(dpi, &limit);
mtk_dpi_config_bit_num(dpi, dpi->bit_num);
mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
mtk_dpi_config_yc_map(dpi, dpi->yc_map);
mtk_dpi_config_color_format(dpi, dpi->color_format);
mtk_dpi_config_2n_h_fre(dpi);
mtk_dpi_sw_reset(dpi, false);
return 0;
}
static void mtk_dpi_encoder_destroy(struct drm_encoder *encoder)
{
drm_encoder_cleanup(encoder);
}
static const struct drm_encoder_funcs mtk_dpi_encoder_funcs = {
.destroy = mtk_dpi_encoder_destroy,
};
static bool mtk_dpi_encoder_mode_fixup(struct drm_encoder *encoder,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
return true;
}
static void mtk_dpi_encoder_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
drm_mode_copy(&dpi->mode, adjusted_mode);
}
static void mtk_dpi_encoder_disable(struct drm_encoder *encoder)
{
struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
mtk_dpi_power_off(dpi);
}
static void mtk_dpi_encoder_enable(struct drm_encoder *encoder)
{
struct mtk_dpi *dpi = mtk_dpi_from_encoder(encoder);
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
mtk_dpi_power_on(dpi);
mtk_dpi_set_display_mode(dpi, &dpi->mode);
}
static int mtk_dpi_atomic_check(struct drm_encoder *encoder,
struct drm_crtc_state *crtc_state,
struct drm_connector_state *conn_state)
{
return 0;
}
static const struct drm_encoder_helper_funcs mtk_dpi_encoder_helper_funcs = {
.mode_fixup = mtk_dpi_encoder_mode_fixup,
.mode_set = mtk_dpi_encoder_mode_set,
.disable = mtk_dpi_encoder_disable,
.enable = mtk_dpi_encoder_enable,
.atomic_check = mtk_dpi_atomic_check,
};
static void mtk_dpi_start(struct mtk_ddp_comp *comp)
{
struct mtk_dpi *dpi = container_of(comp, struct mtk_dpi, ddp_comp);
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
mtk_dpi_power_on(dpi);
}
static void mtk_dpi_stop(struct mtk_ddp_comp *comp)
{
struct mtk_dpi *dpi = container_of(comp, struct mtk_dpi, ddp_comp);
drm/mediatek: add refcount for DPI power on/off After the kernel 4.4, the DRM disable flow was changed, if DPI was disableed before CRTC, it will cause warning message as following: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1339 at ../../linux/linux-4.4.24-mtk/drivers/gpu/drm/drm_irq.c:1326 drm_wait_one_vblank+0x188/0x18c() vblank wait timed out on crtc 0 Modules linked in: bridge mt8521p_ir_shim(O) i2c_eeprom(O) mtk_m4(O) fuse_ctrl(O) virtual_block(O) caamkeys(PO) chk(PO) amperctl(O) ledctl(O) apple_auth(PO) micctl(O) sensors(PO) lla(O) sdd(PO) ice40_fpga(O) psmon(O) event_queue(PO) utils(O) blackbox(O) CPU: 0 PID: 1339 Comm: kworker/0:1 Tainted: P W O 4.4.24 #1 Hardware name: Mediatek Cortex-A7 (Device Tree) Workqueue: events drm_mode_rmfb_work_fn [<c001a710>] (unwind_backtrace) from [<c00151e4>] (show_stack+0x20/0x24) [<c00151e4>] (show_stack) from [<c027961c>] (dump_stack+0x98/0xac) [<c027961c>] (dump_stack) from [<c002ac54>] (warn_slowpath_common+0x94/0xc4) [<c002ac54>] (warn_slowpath_common) from [<c002acc4>] (warn_slowpath_fmt+0x40/0x48) [<c002acc4>] (warn_slowpath_fmt) from [<c03307ac>] (drm_wait_one_vblank+0x188/0x18c) [<c03307ac>] (drm_wait_one_vblank) from [<c03307d8>] (drm_crtc_wait_one_vblank+0x28/0x2c) [<c03307d8>] (drm_crtc_wait_one_vblank) from [<c034f48c>] (mtk_drm_crtc_disable+0x78/0x240) [<c034f48c>] (mtk_drm_crtc_disable) from [<c03240d4>] (drm_atomic_helper_commit_modeset_disables+0x128/0x3b8) [<c03240d4>] (drm_atomic_helper_commit_modeset_disables) from [<c0350a7c>] (mtk_atomic_complete+0x74/0xb4) [<c0350a7c>] (mtk_atomic_complete) from [<c0350b24>] (mtk_atomic_commit+0x68/0x98) [<c0350b24>] (mtk_atomic_commit) from [<c034ab48>] (drm_atomic_commit+0x54/0x74) [<c034ab48>] (drm_atomic_commit) from [<c0325c4c>] (drm_atomic_helper_set_config+0x7c/0xa0) [<c0325c4c>] (drm_atomic_helper_set_config) from [<c0338594>] (drm_mode_set_config_internal+0x68/0xe4) [<c0338594>] (drm_mode_set_config_internal) from [<c033967c>] (drm_framebuffer_remove+0xe4/0x120) [<c033967c>] (drm_framebuffer_remove) from [<c0339700>] (drm_mode_rmfb_work_fn+0x48/0x58) [<c0339700>] (drm_mode_rmfb_work_fn) from [<c0043a38>] (process_one_work+0x154/0x50c) [<c0043a38>] (process_one_work) from [<c0044074>] (worker_thread+0x284/0x568) [<c0044074>] (worker_thread) from [<c0049dc4>] (kthread+0xec/0x104) [<c0049dc4>] (kthread) from [<c0010678>] (ret_from_fork+0x14/0x3c) ---[ end trace 12ae5358e992abd5 ]--- so, we add refcount for DPI power on/off to protect the flow. Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com> Signed-off-by: chunhui dai <chunhui.dai@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com>
2018-10-03 11:41:41 +08:00
mtk_dpi_power_off(dpi);
}
static const struct mtk_ddp_comp_funcs mtk_dpi_funcs = {
.start = mtk_dpi_start,
.stop = mtk_dpi_stop,
};
static int mtk_dpi_bind(struct device *dev, struct device *master, void *data)
{
struct mtk_dpi *dpi = dev_get_drvdata(dev);
struct drm_device *drm_dev = data;
int ret;
ret = mtk_ddp_comp_register(drm_dev, &dpi->ddp_comp);
if (ret < 0) {
drm: Convert to using %pOF instead of full_name Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Partially-Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul changed subject prefix and fixed conflict in stm/ltdc.c] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-19 05:43:04 +08:00
dev_err(dev, "Failed to register component %pOF: %d\n",
dev->of_node, ret);
return ret;
}
ret = drm_encoder_init(drm_dev, &dpi->encoder, &mtk_dpi_encoder_funcs,
DRM_MODE_ENCODER_TMDS, NULL);
if (ret) {
dev_err(dev, "Failed to initialize decoder: %d\n", ret);
goto err_unregister;
}
drm_encoder_helper_add(&dpi->encoder, &mtk_dpi_encoder_helper_funcs);
/* Currently DPI0 is fixed to be driven by OVL1 */
dpi->encoder.possible_crtcs = BIT(1);
ret = drm_bridge_attach(&dpi->encoder, dpi->bridge, NULL);
if (ret) {
dev_err(dev, "Failed to attach bridge: %d\n", ret);
goto err_cleanup;
}
dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
return 0;
err_cleanup:
drm_encoder_cleanup(&dpi->encoder);
err_unregister:
mtk_ddp_comp_unregister(drm_dev, &dpi->ddp_comp);
return ret;
}
static void mtk_dpi_unbind(struct device *dev, struct device *master,
void *data)
{
struct mtk_dpi *dpi = dev_get_drvdata(dev);
struct drm_device *drm_dev = data;
drm_encoder_cleanup(&dpi->encoder);
mtk_ddp_comp_unregister(drm_dev, &dpi->ddp_comp);
}
static const struct component_ops mtk_dpi_component_ops = {
.bind = mtk_dpi_bind,
.unbind = mtk_dpi_unbind,
};
static const struct mtk_dpi_conf mt8173_conf = {
.reg_h_fre_con = 0xe0,
};
static int mtk_dpi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct mtk_dpi *dpi;
struct resource *mem;
struct device_node *bridge_node;
int comp_id;
int ret;
dpi = devm_kzalloc(dev, sizeof(*dpi), GFP_KERNEL);
if (!dpi)
return -ENOMEM;
dpi->dev = dev;
dpi->conf = (struct mtk_dpi_conf *)of_device_get_match_data(dev);
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
dpi->regs = devm_ioremap_resource(dev, mem);
if (IS_ERR(dpi->regs)) {
ret = PTR_ERR(dpi->regs);
dev_err(dev, "Failed to ioremap mem resource: %d\n", ret);
return ret;
}
dpi->engine_clk = devm_clk_get(dev, "engine");
if (IS_ERR(dpi->engine_clk)) {
ret = PTR_ERR(dpi->engine_clk);
dev_err(dev, "Failed to get engine clock: %d\n", ret);
return ret;
}
dpi->pixel_clk = devm_clk_get(dev, "pixel");
if (IS_ERR(dpi->pixel_clk)) {
ret = PTR_ERR(dpi->pixel_clk);
dev_err(dev, "Failed to get pixel clock: %d\n", ret);
return ret;
}
dpi->tvd_clk = devm_clk_get(dev, "pll");
if (IS_ERR(dpi->tvd_clk)) {
ret = PTR_ERR(dpi->tvd_clk);
dev_err(dev, "Failed to get tvdpll clock: %d\n", ret);
return ret;
}
dpi->irq = platform_get_irq(pdev, 0);
if (dpi->irq <= 0) {
dev_err(dev, "Failed to get irq: %d\n", dpi->irq);
return -EINVAL;
}
bridge_node = of_graph_get_remote_node(dev->of_node, 0, 0);
if (!bridge_node)
return -ENODEV;
drm: Convert to using %pOF instead of full_name Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Russell King <linux@armlinux.org.uk> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Xinwei Kong <kong.kongxinwei@hisilicon.com> Cc: Chen Feng <puck.chen@hisilicon.com> Cc: CK Hu <ck.hu@mediatek.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Partially-Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> [seanpaul changed subject prefix and fixed conflict in stm/ltdc.c] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-19 05:43:04 +08:00
dev_info(dev, "Found bridge node: %pOF\n", bridge_node);
dpi->bridge = of_drm_find_bridge(bridge_node);
of_node_put(bridge_node);
if (!dpi->bridge)
return -EPROBE_DEFER;
comp_id = mtk_ddp_comp_get_id(dev->of_node, MTK_DPI);
if (comp_id < 0) {
dev_err(dev, "Failed to identify by alias: %d\n", comp_id);
return comp_id;
}
ret = mtk_ddp_comp_init(dev, dev->of_node, &dpi->ddp_comp, comp_id,
&mtk_dpi_funcs);
if (ret) {
dev_err(dev, "Failed to initialize component: %d\n", ret);
return ret;
}
platform_set_drvdata(pdev, dpi);
ret = component_add(dev, &mtk_dpi_component_ops);
if (ret) {
dev_err(dev, "Failed to add component: %d\n", ret);
return ret;
}
return 0;
}
static int mtk_dpi_remove(struct platform_device *pdev)
{
component_del(&pdev->dev, &mtk_dpi_component_ops);
return 0;
}
static const struct of_device_id mtk_dpi_of_ids[] = {
{ .compatible = "mediatek,mt8173-dpi",
.data = &mt8173_conf,
},
{ },
};
struct platform_driver mtk_dpi_driver = {
.probe = mtk_dpi_probe,
.remove = mtk_dpi_remove,
.driver = {
.name = "mediatek-dpi",
.of_match_table = mtk_dpi_of_ids,
},
};