OpenCloudOS-Kernel/drivers/ide/ide-disk.c

997 lines
24 KiB
C
Raw Normal View History

/*
* Copyright (C) 1994-1998 Linus Torvalds & authors (see below)
* Copyright (C) 1998-2002 Linux ATA Development
* Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2003 Red Hat <alan@redhat.com>
* Copyright (C) 2003-2005, 2007 Bartlomiej Zolnierkiewicz
*/
/*
* Mostly written by Mark Lord <mlord@pobox.com>
* and Gadi Oxman <gadio@netvision.net.il>
* and Andre Hedrick <andre@linux-ide.org>
*
* This is the IDE/ATA disk driver, as evolved from hd.c and ide.c.
*/
#define IDEDISK_VERSION "1.18"
#include <linux/module.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/genhd.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/leds.h>
#include <linux/ide.h>
#include <linux/hdreg.h>
#include <asm/byteorder.h>
#include <asm/irq.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/div64.h>
#if !defined(CONFIG_DEBUG_BLOCK_EXT_DEVT)
#define IDE_DISK_MINORS (1 << PARTN_BITS)
#else
#define IDE_DISK_MINORS 0
#endif
#include "ide-disk.h"
static DEFINE_MUTEX(idedisk_ref_mutex);
#define to_ide_disk(obj) container_of(obj, struct ide_disk_obj, kref)
static void ide_disk_release(struct kref *);
static struct ide_disk_obj *ide_disk_get(struct gendisk *disk)
{
struct ide_disk_obj *idkp = NULL;
mutex_lock(&idedisk_ref_mutex);
idkp = ide_disk_g(disk);
if (idkp) {
ide: fix regression caused by ide_device_{get,put}() addition (take 2) On Monday 28 July 2008, Benjamin Herrenschmidt wrote: [...] > Vector: 300 (Data Access) at [c58b7b80] > pc: c014f264: elv_may_queue+0x10/0x44 > lr: c0152750: get_request+0x2c/0x2c0 > sp: c58b7c30 > msr: 1032 > dar: c > dsisr: 40000000 > current = 0xc58aaae0 > pid = 854, comm = media-bay > enter ? for help > mon> t > [c58b7c40] c0152750 get_request+0x2c/0x2c0 > [c58b7c70] c0152a08 get_request_wait+0x24/0xec > [c58b7cc0] c0225674 ide_cd_queue_pc+0x58/0x1a0 > [c58b7d40] c022672c ide_cdrom_packet+0x9c/0xdc > [c58b7d70] c0261810 cdrom_get_disc_info+0x60/0xd0 > [c58b7dc0] c026208c cdrom_mrw_exit+0x1c/0x11c > [c58b7e30] c0260f7c unregister_cdrom+0x84/0xe8 > [c58b7e50] c022395c ide_cd_release+0x80/0x84 > [c58b7e70] c0163650 kref_put+0x54/0x6c > [c58b7e80] c0223884 ide_cd_put+0x40/0x5c > [c58b7ea0] c0211100 generic_ide_remove+0x28/0x3c > [c58b7eb0] c01e9d34 __device_release_driver+0x78/0xb4 > [c58b7ec0] c01e9e44 device_release_driver+0x28/0x44 > [c58b7ee0] c01e8f7c bus_remove_device+0xac/0xd8 > [c58b7f00] c01e7424 device_del+0x104/0x198 > [c58b7f20] c01e74d0 device_unregister+0x18/0x30 > [c58b7f40] c02121c4 __ide_port_unregister_devices+0x6c/0x88 > [c58b7f60] c0212398 ide_port_unregister_devices+0x38/0x80 > [c58b7f80] c0208ca4 media_bay_step+0x1cc/0x5c0 > [c58b7fb0] c0209124 media_bay_task+0x8c/0xcc > [c58b7fd0] c00485c0 kthread+0x48/0x84 > [c58b7ff0] c0011b20 kernel_thread+0x44/0x60 The guilty commit turned out to be 08da591e14cf87247ec09b17c350235157a92fc3 ("ide: add ide_device_{get,put}() helpers"). ide_device_put() is called before kref_put() in ide_cd_put() so IDE device is already gone by the time ide_cd_release() is reached. Fix it by calling ide_device_get() before kref_get() and ide_device_put() after kref_put() in all affected device drivers. v2: Brown paper bag time. In v1 cd->drive was referenced after dropping last reference on cd object (which could result in OOPS in ide_device_put() as reported/debugged by Mariusz Kozlowski). Fix it by caching cd->drive in the local variable (fix other device drivers too). Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Tested-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-06 00:16:59 +08:00
if (ide_device_get(idkp->drive))
idkp = NULL;
ide: fix regression caused by ide_device_{get,put}() addition (take 2) On Monday 28 July 2008, Benjamin Herrenschmidt wrote: [...] > Vector: 300 (Data Access) at [c58b7b80] > pc: c014f264: elv_may_queue+0x10/0x44 > lr: c0152750: get_request+0x2c/0x2c0 > sp: c58b7c30 > msr: 1032 > dar: c > dsisr: 40000000 > current = 0xc58aaae0 > pid = 854, comm = media-bay > enter ? for help > mon> t > [c58b7c40] c0152750 get_request+0x2c/0x2c0 > [c58b7c70] c0152a08 get_request_wait+0x24/0xec > [c58b7cc0] c0225674 ide_cd_queue_pc+0x58/0x1a0 > [c58b7d40] c022672c ide_cdrom_packet+0x9c/0xdc > [c58b7d70] c0261810 cdrom_get_disc_info+0x60/0xd0 > [c58b7dc0] c026208c cdrom_mrw_exit+0x1c/0x11c > [c58b7e30] c0260f7c unregister_cdrom+0x84/0xe8 > [c58b7e50] c022395c ide_cd_release+0x80/0x84 > [c58b7e70] c0163650 kref_put+0x54/0x6c > [c58b7e80] c0223884 ide_cd_put+0x40/0x5c > [c58b7ea0] c0211100 generic_ide_remove+0x28/0x3c > [c58b7eb0] c01e9d34 __device_release_driver+0x78/0xb4 > [c58b7ec0] c01e9e44 device_release_driver+0x28/0x44 > [c58b7ee0] c01e8f7c bus_remove_device+0xac/0xd8 > [c58b7f00] c01e7424 device_del+0x104/0x198 > [c58b7f20] c01e74d0 device_unregister+0x18/0x30 > [c58b7f40] c02121c4 __ide_port_unregister_devices+0x6c/0x88 > [c58b7f60] c0212398 ide_port_unregister_devices+0x38/0x80 > [c58b7f80] c0208ca4 media_bay_step+0x1cc/0x5c0 > [c58b7fb0] c0209124 media_bay_task+0x8c/0xcc > [c58b7fd0] c00485c0 kthread+0x48/0x84 > [c58b7ff0] c0011b20 kernel_thread+0x44/0x60 The guilty commit turned out to be 08da591e14cf87247ec09b17c350235157a92fc3 ("ide: add ide_device_{get,put}() helpers"). ide_device_put() is called before kref_put() in ide_cd_put() so IDE device is already gone by the time ide_cd_release() is reached. Fix it by calling ide_device_get() before kref_get() and ide_device_put() after kref_put() in all affected device drivers. v2: Brown paper bag time. In v1 cd->drive was referenced after dropping last reference on cd object (which could result in OOPS in ide_device_put() as reported/debugged by Mariusz Kozlowski). Fix it by caching cd->drive in the local variable (fix other device drivers too). Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Tested-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-06 00:16:59 +08:00
else
kref_get(&idkp->kref);
}
mutex_unlock(&idedisk_ref_mutex);
return idkp;
}
static void ide_disk_put(struct ide_disk_obj *idkp)
{
ide: fix regression caused by ide_device_{get,put}() addition (take 2) On Monday 28 July 2008, Benjamin Herrenschmidt wrote: [...] > Vector: 300 (Data Access) at [c58b7b80] > pc: c014f264: elv_may_queue+0x10/0x44 > lr: c0152750: get_request+0x2c/0x2c0 > sp: c58b7c30 > msr: 1032 > dar: c > dsisr: 40000000 > current = 0xc58aaae0 > pid = 854, comm = media-bay > enter ? for help > mon> t > [c58b7c40] c0152750 get_request+0x2c/0x2c0 > [c58b7c70] c0152a08 get_request_wait+0x24/0xec > [c58b7cc0] c0225674 ide_cd_queue_pc+0x58/0x1a0 > [c58b7d40] c022672c ide_cdrom_packet+0x9c/0xdc > [c58b7d70] c0261810 cdrom_get_disc_info+0x60/0xd0 > [c58b7dc0] c026208c cdrom_mrw_exit+0x1c/0x11c > [c58b7e30] c0260f7c unregister_cdrom+0x84/0xe8 > [c58b7e50] c022395c ide_cd_release+0x80/0x84 > [c58b7e70] c0163650 kref_put+0x54/0x6c > [c58b7e80] c0223884 ide_cd_put+0x40/0x5c > [c58b7ea0] c0211100 generic_ide_remove+0x28/0x3c > [c58b7eb0] c01e9d34 __device_release_driver+0x78/0xb4 > [c58b7ec0] c01e9e44 device_release_driver+0x28/0x44 > [c58b7ee0] c01e8f7c bus_remove_device+0xac/0xd8 > [c58b7f00] c01e7424 device_del+0x104/0x198 > [c58b7f20] c01e74d0 device_unregister+0x18/0x30 > [c58b7f40] c02121c4 __ide_port_unregister_devices+0x6c/0x88 > [c58b7f60] c0212398 ide_port_unregister_devices+0x38/0x80 > [c58b7f80] c0208ca4 media_bay_step+0x1cc/0x5c0 > [c58b7fb0] c0209124 media_bay_task+0x8c/0xcc > [c58b7fd0] c00485c0 kthread+0x48/0x84 > [c58b7ff0] c0011b20 kernel_thread+0x44/0x60 The guilty commit turned out to be 08da591e14cf87247ec09b17c350235157a92fc3 ("ide: add ide_device_{get,put}() helpers"). ide_device_put() is called before kref_put() in ide_cd_put() so IDE device is already gone by the time ide_cd_release() is reached. Fix it by calling ide_device_get() before kref_get() and ide_device_put() after kref_put() in all affected device drivers. v2: Brown paper bag time. In v1 cd->drive was referenced after dropping last reference on cd object (which could result in OOPS in ide_device_put() as reported/debugged by Mariusz Kozlowski). Fix it by caching cd->drive in the local variable (fix other device drivers too). Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Tested-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-06 00:16:59 +08:00
ide_drive_t *drive = idkp->drive;
mutex_lock(&idedisk_ref_mutex);
kref_put(&idkp->kref, ide_disk_release);
ide: fix regression caused by ide_device_{get,put}() addition (take 2) On Monday 28 July 2008, Benjamin Herrenschmidt wrote: [...] > Vector: 300 (Data Access) at [c58b7b80] > pc: c014f264: elv_may_queue+0x10/0x44 > lr: c0152750: get_request+0x2c/0x2c0 > sp: c58b7c30 > msr: 1032 > dar: c > dsisr: 40000000 > current = 0xc58aaae0 > pid = 854, comm = media-bay > enter ? for help > mon> t > [c58b7c40] c0152750 get_request+0x2c/0x2c0 > [c58b7c70] c0152a08 get_request_wait+0x24/0xec > [c58b7cc0] c0225674 ide_cd_queue_pc+0x58/0x1a0 > [c58b7d40] c022672c ide_cdrom_packet+0x9c/0xdc > [c58b7d70] c0261810 cdrom_get_disc_info+0x60/0xd0 > [c58b7dc0] c026208c cdrom_mrw_exit+0x1c/0x11c > [c58b7e30] c0260f7c unregister_cdrom+0x84/0xe8 > [c58b7e50] c022395c ide_cd_release+0x80/0x84 > [c58b7e70] c0163650 kref_put+0x54/0x6c > [c58b7e80] c0223884 ide_cd_put+0x40/0x5c > [c58b7ea0] c0211100 generic_ide_remove+0x28/0x3c > [c58b7eb0] c01e9d34 __device_release_driver+0x78/0xb4 > [c58b7ec0] c01e9e44 device_release_driver+0x28/0x44 > [c58b7ee0] c01e8f7c bus_remove_device+0xac/0xd8 > [c58b7f00] c01e7424 device_del+0x104/0x198 > [c58b7f20] c01e74d0 device_unregister+0x18/0x30 > [c58b7f40] c02121c4 __ide_port_unregister_devices+0x6c/0x88 > [c58b7f60] c0212398 ide_port_unregister_devices+0x38/0x80 > [c58b7f80] c0208ca4 media_bay_step+0x1cc/0x5c0 > [c58b7fb0] c0209124 media_bay_task+0x8c/0xcc > [c58b7fd0] c00485c0 kthread+0x48/0x84 > [c58b7ff0] c0011b20 kernel_thread+0x44/0x60 The guilty commit turned out to be 08da591e14cf87247ec09b17c350235157a92fc3 ("ide: add ide_device_{get,put}() helpers"). ide_device_put() is called before kref_put() in ide_cd_put() so IDE device is already gone by the time ide_cd_release() is reached. Fix it by calling ide_device_get() before kref_get() and ide_device_put() after kref_put() in all affected device drivers. v2: Brown paper bag time. In v1 cd->drive was referenced after dropping last reference on cd object (which could result in OOPS in ide_device_put() as reported/debugged by Mariusz Kozlowski). Fix it by caching cd->drive in the local variable (fix other device drivers too). Reported-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reported-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Borislav Petkov <petkovbb@gmail.com> Tested-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Tested-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-06 00:16:59 +08:00
ide_device_put(drive);
mutex_unlock(&idedisk_ref_mutex);
}
static const u8 ide_rw_cmds[] = {
ATA_CMD_READ_MULTI,
ATA_CMD_WRITE_MULTI,
ATA_CMD_READ_MULTI_EXT,
ATA_CMD_WRITE_MULTI_EXT,
ATA_CMD_PIO_READ,
ATA_CMD_PIO_WRITE,
ATA_CMD_PIO_READ_EXT,
ATA_CMD_PIO_WRITE_EXT,
ATA_CMD_READ,
ATA_CMD_WRITE,
ATA_CMD_READ_EXT,
ATA_CMD_WRITE_EXT,
};
static const u8 ide_data_phases[] = {
TASKFILE_MULTI_IN,
TASKFILE_MULTI_OUT,
TASKFILE_IN,
TASKFILE_OUT,
TASKFILE_IN_DMA,
TASKFILE_OUT_DMA,
};
static void ide_tf_set_cmd(ide_drive_t *drive, ide_task_t *task, u8 dma)
{
u8 index, lba48, write;
lba48 = (task->tf_flags & IDE_TFLAG_LBA48) ? 2 : 0;
write = (task->tf_flags & IDE_TFLAG_WRITE) ? 1 : 0;
if (dma)
index = 8;
else
index = drive->mult_count ? 0 : 4;
task->tf.command = ide_rw_cmds[index + lba48 + write];
if (dma)
index = 8; /* fixup index */
task->data_phase = ide_data_phases[index / 2 + write];
}
/*
* __ide_do_rw_disk() issues READ and WRITE commands to a disk,
* using LBA if supported, or CHS otherwise, to address sectors.
*/
static ide_startstop_t __ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
sector_t block)
{
ide_hwif_t *hwif = HWIF(drive);
u16 nsectors = (u16)rq->nr_sectors;
u8 lba48 = !!(drive->dev_flags & IDE_DFLAG_LBA48);
u8 dma = !!(drive->dev_flags & IDE_DFLAG_USING_DMA);
ide_task_t task;
struct ide_taskfile *tf = &task.tf;
ide_startstop_t rc;
if ((hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) && lba48 && dma) {
if (block + rq->nr_sectors > 1ULL << 28)
dma = 0;
else
lba48 = 0;
}
if (!dma) {
ide_init_sg_cmd(drive, rq);
ide_map_sg(drive, rq);
}
memset(&task, 0, sizeof(task));
task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
if (drive->dev_flags & IDE_DFLAG_LBA) {
if (lba48) {
pr_debug("%s: LBA=0x%012llx\n", drive->name,
(unsigned long long)block);
tf->hob_nsect = (nsectors >> 8) & 0xff;
tf->hob_lbal = (u8)(block >> 24);
if (sizeof(block) != 4) {
tf->hob_lbam = (u8)((u64)block >> 32);
tf->hob_lbah = (u8)((u64)block >> 40);
}
tf->nsect = nsectors & 0xff;
tf->lbal = (u8) block;
tf->lbam = (u8)(block >> 8);
tf->lbah = (u8)(block >> 16);
task.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
} else {
tf->nsect = nsectors & 0xff;
tf->lbal = block;
tf->lbam = block >>= 8;
tf->lbah = block >>= 8;
tf->device = (block >> 8) & 0xf;
}
tf->device |= ATA_LBA;
} else {
unsigned int sect, head, cyl, track;
track = (int)block / drive->sect;
sect = (int)block % drive->sect + 1;
head = track % drive->head;
cyl = track / drive->head;
pr_debug("%s: CHS=%u/%u/%u\n", drive->name, cyl, head, sect);
tf->nsect = nsectors & 0xff;
tf->lbal = sect;
tf->lbam = cyl;
tf->lbah = cyl >> 8;
tf->device = head;
}
if (rq_data_dir(rq))
task.tf_flags |= IDE_TFLAG_WRITE;
ide_tf_set_cmd(drive, &task, dma);
if (!dma)
hwif->data_phase = task.data_phase;
task.rq = rq;
rc = do_rw_taskfile(drive, &task);
if (rc == ide_stopped && dma) {
/* fallback to PIO */
task.tf_flags |= IDE_TFLAG_DMA_PIO_FALLBACK;
ide_tf_set_cmd(drive, &task, 0);
hwif->data_phase = task.data_phase;
ide_init_sg_cmd(drive, rq);
rc = do_rw_taskfile(drive, &task);
}
return rc;
}
/*
* 268435455 == 137439 MB or 28bit limit
* 320173056 == 163929 MB or 48bit addressing
* 1073741822 == 549756 MB or 48bit addressing fake drive
*/
static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq,
sector_t block)
{
ide_hwif_t *hwif = HWIF(drive);
BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED);
if (!blk_fs_request(rq)) {
blk_dump_rq_flags(rq, "ide_do_rw_disk - bad command");
ide_end_request(drive, 0, 0);
return ide_stopped;
}
ledtrig_ide_activity();
pr_debug("%s: %sing: block=%llu, sectors=%lu, buffer=0x%08lx\n",
drive->name, rq_data_dir(rq) == READ ? "read" : "writ",
(unsigned long long)block, rq->nr_sectors,
(unsigned long)rq->buffer);
if (hwif->rw_disk)
hwif->rw_disk(drive, rq);
return __ide_do_rw_disk(drive, rq, block);
}
/*
* Queries for true maximum capacity of the drive.
* Returns maximum LBA address (> 0) of the drive, 0 if failed.
*/
static u64 idedisk_read_native_max_address(ide_drive_t *drive, int lba48)
{
ide_task_t args;
struct ide_taskfile *tf = &args.tf;
u64 addr = 0;
/* Create IDE/ATA command request structure */
memset(&args, 0, sizeof(ide_task_t));
if (lba48)
tf->command = ATA_CMD_READ_NATIVE_MAX_EXT;
else
tf->command = ATA_CMD_READ_NATIVE_MAX;
tf->device = ATA_LBA;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
if (lba48)
args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
/* submit command request */
ide_no_data_taskfile(drive, &args);
/* if OK, compute maximum address value */
if ((tf->status & 0x01) == 0)
addr = ide_get_lba_addr(tf, lba48) + 1;
return addr;
}
/*
* Sets maximum virtual LBA address of the drive.
* Returns new maximum virtual LBA address (> 0) or 0 on failure.
*/
static u64 idedisk_set_max_address(ide_drive_t *drive, u64 addr_req, int lba48)
{
ide_task_t args;
struct ide_taskfile *tf = &args.tf;
u64 addr_set = 0;
addr_req--;
/* Create IDE/ATA command request structure */
memset(&args, 0, sizeof(ide_task_t));
tf->lbal = (addr_req >> 0) & 0xff;
tf->lbam = (addr_req >>= 8) & 0xff;
tf->lbah = (addr_req >>= 8) & 0xff;
if (lba48) {
tf->hob_lbal = (addr_req >>= 8) & 0xff;
tf->hob_lbam = (addr_req >>= 8) & 0xff;
tf->hob_lbah = (addr_req >>= 8) & 0xff;
tf->command = ATA_CMD_SET_MAX_EXT;
} else {
tf->device = (addr_req >>= 8) & 0x0f;
tf->command = ATA_CMD_SET_MAX;
}
tf->device |= ATA_LBA;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
if (lba48)
args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_HOB);
/* submit command request */
ide_no_data_taskfile(drive, &args);
/* if OK, compute maximum address value */
if ((tf->status & 0x01) == 0)
addr_set = ide_get_lba_addr(tf, lba48) + 1;
return addr_set;
}
static unsigned long long sectors_to_MB(unsigned long long n)
{
n <<= 9; /* make it bytes */
do_div(n, 1000000); /* make it MB */
return n;
}
/*
* Some disks report total number of sectors instead of
* maximum sector address. We list them here.
*/
static const struct drive_list_entry hpa_list[] = {
{ "ST340823A", NULL },
{ "ST320413A", NULL },
{ "ST310211A", NULL },
{ NULL, NULL }
};
static void idedisk_check_hpa(ide_drive_t *drive)
{
unsigned long long capacity, set_max;
int lba48 = ata_id_lba48_enabled(drive->id);
capacity = drive->capacity64;
set_max = idedisk_read_native_max_address(drive, lba48);
if (ide_in_drive_list(drive->id, hpa_list)) {
/*
* Since we are inclusive wrt to firmware revisions do this
* extra check and apply the workaround only when needed.
*/
if (set_max == capacity + 1)
set_max--;
}
if (set_max <= capacity)
return;
printk(KERN_INFO "%s: Host Protected Area detected.\n"
"\tcurrent capacity is %llu sectors (%llu MB)\n"
"\tnative capacity is %llu sectors (%llu MB)\n",
drive->name,
capacity, sectors_to_MB(capacity),
set_max, sectors_to_MB(set_max));
set_max = idedisk_set_max_address(drive, set_max, lba48);
if (set_max) {
drive->capacity64 = set_max;
printk(KERN_INFO "%s: Host Protected Area disabled.\n",
drive->name);
}
}
static void init_idedisk_capacity(ide_drive_t *drive)
{
u16 *id = drive->id;
int lba;
if (ata_id_lba48_enabled(id)) {
/* drive speaks 48-bit LBA */
lba = 1;
drive->capacity64 = ata_id_u64(id, ATA_ID_LBA_CAPACITY_2);
} else if (ata_id_has_lba(id) && ata_id_is_lba_capacity_ok(id)) {
/* drive speaks 28-bit LBA */
lba = 1;
drive->capacity64 = ata_id_u32(id, ATA_ID_LBA_CAPACITY);
} else {
/* drive speaks boring old 28-bit CHS */
lba = 0;
drive->capacity64 = drive->cyl * drive->head * drive->sect;
}
if (lba) {
drive->dev_flags |= IDE_DFLAG_LBA;
/*
* If this device supports the Host Protected Area feature set,
* then we may need to change our opinion about its capacity.
*/
if (ata_id_hpa_enabled(id))
idedisk_check_hpa(drive);
}
/* limit drive capacity to 137GB if LBA48 cannot be used */
if ((drive->dev_flags & IDE_DFLAG_LBA48) == 0 &&
drive->capacity64 > 1ULL << 28) {
printk(KERN_WARNING "%s: cannot use LBA48 - full capacity "
"%llu sectors (%llu MB)\n",
drive->name, (unsigned long long)drive->capacity64,
sectors_to_MB(drive->capacity64));
drive->capacity64 = 1ULL << 28;
}
if ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA) &&
(drive->dev_flags & IDE_DFLAG_LBA48)) {
if (drive->capacity64 > 1ULL << 28) {
printk(KERN_INFO "%s: cannot use LBA48 DMA - PIO mode"
" will be used for accessing sectors "
"> %u\n", drive->name, 1 << 28);
} else
drive->dev_flags &= ~IDE_DFLAG_LBA48;
}
}
sector_t ide_disk_capacity(ide_drive_t *drive)
{
return drive->capacity64;
}
static void idedisk_prepare_flush(struct request_queue *q, struct request *rq)
{
ide_drive_t *drive = q->queuedata;
2008-02-11 07:32:14 +08:00
ide_task_t *task = kmalloc(sizeof(*task), GFP_ATOMIC);
2008-02-11 07:32:14 +08:00
/* FIXME: map struct ide_taskfile on rq->cmd[] */
BUG_ON(task == NULL);
memset(task, 0, sizeof(*task));
if (ata_id_flush_ext_enabled(drive->id) &&
(drive->capacity64 >= (1UL << 28)))
task->tf.command = ATA_CMD_FLUSH_EXT;
else
task->tf.command = ATA_CMD_FLUSH;
2008-02-11 07:32:14 +08:00
task->tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_OUT_DEVICE |
IDE_TFLAG_DYN;
task->data_phase = TASKFILE_NO_DATA;
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
rq->cmd_flags |= REQ_SOFTBARRIER;
2008-02-11 07:32:14 +08:00
rq->special = task;
}
ide_devset_get(multcount, mult_count);
/*
* This is tightly woven into the driver->do_special can not touch.
* DON'T do it again until a total personality rewrite is committed.
*/
static int set_multcount(ide_drive_t *drive, int arg)
{
struct request *rq;
int error;
if (arg < 0 || arg > (drive->id[ATA_ID_MAX_MULTSECT] & 0xff))
return -EINVAL;
if (drive->special.b.set_multmode)
return -EBUSY;
rq = blk_get_request(drive->queue, READ, __GFP_WAIT);
rq->cmd_type = REQ_TYPE_ATA_TASKFILE;
drive->mult_req = arg;
drive->special.b.set_multmode = 1;
error = blk_execute_rq(drive->queue, NULL, rq, 0);
blk_put_request(rq);
return (drive->mult_count == arg) ? 0 : -EIO;
}
ide_devset_get_flag(nowerr, IDE_DFLAG_NOWERR);
static int set_nowerr(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 1)
return -EINVAL;
if (arg)
drive->dev_flags |= IDE_DFLAG_NOWERR;
else
drive->dev_flags &= ~IDE_DFLAG_NOWERR;
drive->bad_wstat = arg ? BAD_R_STAT : BAD_W_STAT;
return 0;
}
static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
{
ide_task_t task;
memset(&task, 0, sizeof(task));
task.tf.feature = feature;
task.tf.nsect = nsect;
task.tf.command = ATA_CMD_SET_FEATURES;
task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
return ide_no_data_taskfile(drive, &task);
}
static void update_ordered(ide_drive_t *drive)
{
u16 *id = drive->id;
unsigned ordered = QUEUE_ORDERED_NONE;
prepare_flush_fn *prep_fn = NULL;
if (drive->dev_flags & IDE_DFLAG_WCACHE) {
unsigned long long capacity;
int barrier;
/*
* We must avoid issuing commands a drive does not
* understand or we may crash it. We check flush cache
* is supported. We also check we have the LBA48 flush
* cache if the drive capacity is too large. By this
* time we have trimmed the drive capacity if LBA48 is
* not available so we don't need to recheck that.
*/
capacity = ide_disk_capacity(drive);
barrier = ata_id_flush_enabled(id) &&
(drive->dev_flags & IDE_DFLAG_NOFLUSH) == 0 &&
((drive->dev_flags & IDE_DFLAG_LBA48) == 0 ||
capacity <= (1ULL << 28) ||
ata_id_flush_ext_enabled(id));
printk(KERN_INFO "%s: cache flushes %ssupported\n",
drive->name, barrier ? "" : "not ");
if (barrier) {
ordered = QUEUE_ORDERED_DRAIN_FLUSH;
prep_fn = idedisk_prepare_flush;
}
} else
ordered = QUEUE_ORDERED_DRAIN;
blk_queue_ordered(drive->queue, ordered, prep_fn);
}
ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
static int set_wcache(ide_drive_t *drive, int arg)
{
int err = 1;
if (arg < 0 || arg > 1)
return -EINVAL;
if (ata_id_flush_enabled(drive->id)) {
err = ide_do_setfeature(drive,
arg ? SETFEATURES_WC_ON : SETFEATURES_WC_OFF, 0);
if (err == 0) {
if (arg)
drive->dev_flags |= IDE_DFLAG_WCACHE;
else
drive->dev_flags &= ~IDE_DFLAG_WCACHE;
}
}
update_ordered(drive);
return err;
}
static int do_idedisk_flushcache(ide_drive_t *drive)
{
ide_task_t args;
memset(&args, 0, sizeof(ide_task_t));
if (ata_id_flush_ext_enabled(drive->id))
args.tf.command = ATA_CMD_FLUSH_EXT;
else
args.tf.command = ATA_CMD_FLUSH;
args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
return ide_no_data_taskfile(drive, &args);
}
ide_devset_get(acoustic, acoustic);
static int set_acoustic(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 254)
return -EINVAL;
ide_do_setfeature(drive,
arg ? SETFEATURES_AAM_ON : SETFEATURES_AAM_OFF, arg);
drive->acoustic = arg;
return 0;
}
ide_devset_get_flag(addressing, IDE_DFLAG_LBA48);
/*
* drive->addressing:
* 0: 28-bit
* 1: 48-bit
* 2: 48-bit capable doing 28-bit
*/
static int set_addressing(ide_drive_t *drive, int arg)
{
if (arg < 0 || arg > 2)
return -EINVAL;
if (arg && ((drive->hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
ata_id_lba48_enabled(drive->id) == 0))
return -EIO;
if (arg == 2)
arg = 0;
if (arg)
drive->dev_flags |= IDE_DFLAG_LBA48;
else
drive->dev_flags &= ~IDE_DFLAG_LBA48;
return 0;
}
ide_ext_devset_rw(acoustic, acoustic);
ide_ext_devset_rw(address, addressing);
ide_ext_devset_rw(multcount, multcount);
ide_ext_devset_rw(wcache, wcache);
ide_ext_devset_rw_sync(nowerr, nowerr);
static void idedisk_setup(ide_drive_t *drive)
{
struct ide_disk_obj *idkp = drive->driver_data;
ide_hwif_t *hwif = drive->hwif;
u16 *id = drive->id;
char *m = (char *)&id[ATA_ID_PROD];
unsigned long long capacity;
ide_proc_register_driver(drive, idkp->driver);
if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0)
return;
if (drive->dev_flags & IDE_DFLAG_REMOVABLE) {
/*
* Removable disks (eg. SYQUEST); ignore 'WD' drives
*/
if (m[0] != 'W' || m[1] != 'D')
drive->dev_flags |= IDE_DFLAG_DOORLOCKING;
}
(void)set_addressing(drive, 1);
if (drive->dev_flags & IDE_DFLAG_LBA48) {
int max_s = 2048;
if (max_s > hwif->rqsize)
max_s = hwif->rqsize;
blk_queue_max_sectors(drive->queue, max_s);
}
printk(KERN_INFO "%s: max request size: %dKiB\n", drive->name,
drive->queue->max_sectors / 2);
/* calculate drive capacity, and select LBA if possible */
init_idedisk_capacity(drive);
/*
* if possible, give fdisk access to more of the drive,
* by correcting bios_cyls:
*/
capacity = ide_disk_capacity(drive);
if ((drive->dev_flags & IDE_DFLAG_FORCED_GEOM) == 0) {
if (ata_id_lba48_enabled(drive->id)) {
/* compatibility */
drive->bios_sect = 63;
drive->bios_head = 255;
}
if (drive->bios_sect && drive->bios_head) {
unsigned int cap0 = capacity; /* truncate to 32 bits */
unsigned int cylsz, cyl;
if (cap0 != capacity)
drive->bios_cyl = 65535;
else {
cylsz = drive->bios_sect * drive->bios_head;
cyl = cap0 / cylsz;
if (cyl > 65535)
cyl = 65535;
if (cyl > drive->bios_cyl)
drive->bios_cyl = cyl;
}
}
}
printk(KERN_INFO "%s: %llu sectors (%llu MB)",
drive->name, capacity, sectors_to_MB(capacity));
/* Only print cache size when it was specified */
if (id[ATA_ID_BUF_SIZE])
printk(KERN_CONT " w/%dKiB Cache", id[ATA_ID_BUF_SIZE] / 2);
ide: DMA reporting and validity checking fixes (take 3) * ide_xfer_verbose() fixups: - beautify returned mode names - fix PIO5 reporting - make it return 'const char *' * Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode(). * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid DMA info in identify block. * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update(). As a result DMA won't be tuned or will be disabled after tuning if device reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the same checks while the IDE device is probed by ide-{cd,disk} device driver). * Remove no longer needed ide_dma_verbose(). This patch should fix the following problem with out-of-sync IDE messages reported by Nick Warne: hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd: skipping word 93 validity check , UDMA(66) and later debugged by Mark Lord to be caused by: ide_dma_verbose() printk( ... "2048kB Cache"); eighty_ninty_three() printk(KERN_DEBUG "%s: skipping word 93 validity check\n"); ide_dma_verbose() printk(", UDMA(66)" Please note that as a result ide-{cd,disk} device drivers won't report the DMA speed used but this is intended since now DMA mode being used is always reported by IDE core code. v2: * fixes suggested by Randy: - use KERN_CONT for printk()-s in ide-{cd,disk}.c - don't remove argument name from ide_xfer_verbose() declaration v3: * Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug() (spotted by Sergei). * "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei). * Fix ide_find_dma_mode() to report the correct mode ('mode' after being limited by 'req_mode'). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Nick Warne <nick@ukfsn.org> Cc: Mark Lord <lkml@rtr.ca> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-12-13 06:31:58 +08:00
printk(KERN_CONT ", CHS=%d/%d/%d\n",
drive->bios_cyl, drive->bios_head, drive->bios_sect);
/* write cache enabled? */
if ((id[ATA_ID_CSFO] & 1) || ata_id_wcache_enabled(id))
drive->dev_flags |= IDE_DFLAG_WCACHE;
set_wcache(drive, 1);
}
static void ide_cacheflush_p(ide_drive_t *drive)
{
if (ata_id_flush_enabled(drive->id) == 0 ||
(drive->dev_flags & IDE_DFLAG_WCACHE) == 0)
return;
if (do_idedisk_flushcache(drive))
printk(KERN_INFO "%s: wcache flush failed!\n", drive->name);
}
static void ide_disk_remove(ide_drive_t *drive)
{
struct ide_disk_obj *idkp = drive->driver_data;
struct gendisk *g = idkp->disk;
ide_proc_unregister_driver(drive, idkp->driver);
del_gendisk(g);
ide_cacheflush_p(drive);
ide_disk_put(idkp);
}
static void ide_disk_release(struct kref *kref)
{
struct ide_disk_obj *idkp = to_ide_disk(kref);
ide_drive_t *drive = idkp->drive;
struct gendisk *g = idkp->disk;
drive->driver_data = NULL;
g->private_data = NULL;
put_disk(g);
kfree(idkp);
}
static int ide_disk_probe(ide_drive_t *drive);
/*
* On HPA drives the capacity needs to be
* reinitilized on resume otherwise the disk
* can not be used and a hard reset is required
*/
static void ide_disk_resume(ide_drive_t *drive)
{
if (ata_id_hpa_enabled(drive->id))
init_idedisk_capacity(drive);
}
static void ide_device_shutdown(ide_drive_t *drive)
{
#ifdef CONFIG_ALPHA
/* On Alpha, halt(8) doesn't actually turn the machine off,
it puts you into the sort of firmware monitor. Typically,
it's used to boot another kernel image, so it's not much
different from reboot(8). Therefore, we don't need to
spin down the disk in this case, especially since Alpha
firmware doesn't handle disks in standby mode properly.
On the other hand, it's reasonably safe to turn the power
off when the shutdown process reaches the firmware prompt,
as the firmware initialization takes rather long time -
at least 10 seconds, which should be sufficient for
the disk to expire its write cache. */
if (system_state != SYSTEM_POWER_OFF) {
#else
if (system_state == SYSTEM_RESTART) {
#endif
ide_cacheflush_p(drive);
return;
}
printk(KERN_INFO "Shutdown: %s\n", drive->name);
drive->gendev.bus->suspend(&drive->gendev, PMSG_SUSPEND);
}
static ide_driver_t idedisk_driver = {
.gen_driver = {
.owner = THIS_MODULE,
.name = "ide-disk",
.bus = &ide_bus_type,
},
.probe = ide_disk_probe,
.remove = ide_disk_remove,
.resume = ide_disk_resume,
.shutdown = ide_device_shutdown,
.version = IDEDISK_VERSION,
.do_request = ide_do_rw_disk,
.end_request = ide_end_request,
.error = __ide_error,
#ifdef CONFIG_IDE_PROC_FS
.proc = ide_disk_proc,
.settings = ide_disk_settings,
#endif
};
static int idedisk_set_doorlock(ide_drive_t *drive, int on)
{
ide_task_t task;
memset(&task, 0, sizeof(task));
task.tf.command = on ? ATA_CMD_MEDIA_LOCK : ATA_CMD_MEDIA_UNLOCK;
task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
return ide_no_data_taskfile(drive, &task);
}
static int idedisk_open(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_disk_obj *idkp;
ide_drive_t *drive;
idkp = ide_disk_get(disk);
if (idkp == NULL)
return -ENXIO;
drive = idkp->drive;
idkp->openers++;
if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
check_disk_change(inode->i_bdev);
/*
* Ignore the return code from door_lock,
* since the open() has already succeeded,
* and the door_lock is irrelevant at this point.
*/
if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) &&
idedisk_set_doorlock(drive, 1))
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}
return 0;
}
static int idedisk_release(struct inode *inode, struct file *filp)
{
struct gendisk *disk = inode->i_bdev->bd_disk;
struct ide_disk_obj *idkp = ide_disk_g(disk);
ide_drive_t *drive = idkp->drive;
if (idkp->openers == 1)
ide_cacheflush_p(drive);
if ((drive->dev_flags & IDE_DFLAG_REMOVABLE) && idkp->openers == 1) {
if ((drive->dev_flags & IDE_DFLAG_DOORLOCKING) &&
idedisk_set_doorlock(drive, 0))
drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
}
idkp->openers--;
ide_disk_put(idkp);
return 0;
}
static int idedisk_getgeo(struct block_device *bdev, struct hd_geometry *geo)
{
struct ide_disk_obj *idkp = ide_disk_g(bdev->bd_disk);
ide_drive_t *drive = idkp->drive;
geo->heads = drive->bios_head;
geo->sectors = drive->bios_sect;
geo->cylinders = (u16)drive->bios_cyl; /* truncate */
return 0;
}
static int idedisk_media_changed(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_disk_g(disk);
ide_drive_t *drive = idkp->drive;
/* do not scan partitions twice if this is a removable device */
if (drive->dev_flags & IDE_DFLAG_ATTACH) {
drive->dev_flags &= ~IDE_DFLAG_ATTACH;
return 0;
}
/* if removable, always assume it was changed */
return !!(drive->dev_flags & IDE_DFLAG_REMOVABLE);
}
static int idedisk_revalidate_disk(struct gendisk *disk)
{
struct ide_disk_obj *idkp = ide_disk_g(disk);
set_capacity(disk, ide_disk_capacity(idkp->drive));
return 0;
}
static struct block_device_operations idedisk_ops = {
.owner = THIS_MODULE,
.open = idedisk_open,
.release = idedisk_release,
.ioctl = ide_disk_ioctl,
.getgeo = idedisk_getgeo,
.media_changed = idedisk_media_changed,
.revalidate_disk = idedisk_revalidate_disk
};
MODULE_DESCRIPTION("ATA DISK Driver");
static int ide_disk_probe(ide_drive_t *drive)
{
struct ide_disk_obj *idkp;
struct gendisk *g;
/* strstr("foo", "") is non-NULL */
if (!strstr("ide-disk", drive->driver_req))
goto failed;
if (drive->media != ide_disk)
goto failed;
idkp = kzalloc(sizeof(*idkp), GFP_KERNEL);
if (!idkp)
goto failed;
g = alloc_disk_node(IDE_DISK_MINORS, hwif_to_node(drive->hwif));
if (!g)
goto out_free_idkp;
ide_init_disk(g, drive);
kref_init(&idkp->kref);
idkp->drive = drive;
idkp->driver = &idedisk_driver;
idkp->disk = g;
g->private_data = &idkp->driver;
drive->driver_data = idkp;
idedisk_setup(drive);
if ((drive->dev_flags & IDE_DFLAG_LBA) == 0 &&
(drive->head == 0 || drive->head > 16)) {
printk(KERN_ERR "%s: INVALID GEOMETRY: %d PHYSICAL HEADS?\n",
drive->name, drive->head);
drive->dev_flags &= ~IDE_DFLAG_ATTACH;
} else
drive->dev_flags |= IDE_DFLAG_ATTACH;
g->minors = IDE_DISK_MINORS;
g->driverfs_dev = &drive->gendev;
g->flags |= GENHD_FL_EXT_DEVT;
if (drive->dev_flags & IDE_DFLAG_REMOVABLE)
g->flags = GENHD_FL_REMOVABLE;
set_capacity(g, ide_disk_capacity(drive));
g->fops = &idedisk_ops;
add_disk(g);
return 0;
out_free_idkp:
kfree(idkp);
failed:
return -ENODEV;
}
static void __exit idedisk_exit(void)
{
driver_unregister(&idedisk_driver.gen_driver);
}
static int __init idedisk_init(void)
{
return driver_register(&idedisk_driver.gen_driver);
}
[PATCH] ide: MODALIAS support for autoloading of ide-cd, ide-disk, ... IDE: MODALIAS support for autoloading of ide-cd, ide-disk, ... Add MODULE_ALIAS to IDE midlayer modules: ide-disk, ide-cd, ide-floppy and ide-tape, to autoload these modules depending on the probed media type of the IDE device. It is used by udev and replaces the former agent shell script of the hotplug package, which was required to lookup the media type in the proc filesystem. Using proc was racy, cause the media file is created after the hotplug event is sent out. The module autoloading does not take any effect, until something like the following udev rule is configured: SUBSYSTEM=="ide", ACTION=="add", ENV{MODALIAS}=="?*", RUN+="/sbin/modprobe $env{MODALIAS}" The module ide-scsi will not be autoloaded, cause it requires manual configuration. It can't be, and never was supported for automatic setup in the hotplug package. Adding a MODULE_ALIAS to ide-scsi for all supported media types, would just lead to a default blacklist entry anyway. $ modinfo ide-disk filename: /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko description: ATA DISK Driver alias: ide:*m-disk* license: GPL ... $ modprobe -vn ide:m-disk insmod /lib/modules/2.6.15-rc4-g1b0997f5/kernel/drivers/ide/ide-disk.ko $ cat /sys/bus/ide/devices/0.0/modalias ide:m-disk It also adds attributes to the IDE device: $ tree /sys/bus/ide/devices/0.0/ /sys/bus/ide/devices/0.0/ |-- bus -> ../../../../../../../bus/ide |-- drivename |-- media |-- modalias |-- power | |-- state | `-- wakeup `-- uevent $ cat /sys/bus/ide/devices/0.0/{modalias,drivename,media} ide:m-disk hda disk Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-12-13 01:03:44 +08:00
MODULE_ALIAS("ide:*m-disk*");
MODULE_ALIAS("ide-disk");
module_init(idedisk_init);
module_exit(idedisk_exit);
MODULE_LICENSE("GPL");