UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/sound/soc/intel/Kconfig

126 lines
3.8 KiB
Plaintext
Raw Normal View History

ASoC: Intel: Fix Kconfig with top-level selector Follow network example suggested by Linus, move Intel definitions in if/endif block and clarify in help text which options distro configurations should enable - everything except legacy Baytrail stuff and NOCODEC (test only) To avoid user confusion, machine drivers are handled with a submenu made dependent on this top-level selector. There should be no functionality change - except that sound capabilities are restored when using older configs without any user selection. Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered out by the top-level selector. This will change in the near future to allow for this option to be selected by both SST and SOF drivers (simplification with submenu for machine drivers by Vinod Koul) Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:53 +08:00
config SND_SOC_INTEL_SST_TOPLEVEL
bool "Intel ASoC SST drivers"
default y
depends on X86 || COMPILE_TEST
select SND_SOC_INTEL_MACH
help
Intel ASoC SST Platform Drivers. If you have a Intel machine that
has an audio controller with a DSP and I2S or DMIC port, then
enable this option by saying Y
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Intel SST drivers.
if SND_SOC_INTEL_SST_TOPLEVEL
ASoC: Intel: sst: Add makefile and kconfig changes Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-16 22:30:19 +08:00
config SND_SST_IPC
tristate
ASoC: Intel: document what Kconfig options do Document in comments what the options are supposed to mean, before clean-up in next patch. No functionality change here. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:55 +08:00
# This option controls the IPC core for HiFi2 platforms
ASoC: Intel: sst: Add makefile and kconfig changes Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-16 22:30:19 +08:00
ASoC: Intel: mrfld - create separate module for pci part Now the SST_IPC will support both ACPI and PCI, separate into core module and PCI module. This also move probe function into PCI module and exports the required symbols from core module Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04 18:55:16 +08:00
config SND_SST_IPC_PCI
tristate
select SND_SST_IPC
ASoC: Intel: document what Kconfig options do Document in comments what the options are supposed to mean, before clean-up in next patch. No functionality change here. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:55 +08:00
# This option controls the PCI-based IPC for HiFi2 platforms
# (Medfield, Merrifield).
ASoC: Intel: mrfld - create separate module for pci part Now the SST_IPC will support both ACPI and PCI, separate into core module and PCI module. This also move probe function into PCI module and exports the required symbols from core module Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04 18:55:16 +08:00
ASoC: Intel: mrfld- add ACPI module Add the last ACPI module support which also uses core module like the PCI part Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-11 19:06:28 +08:00
config SND_SST_IPC_ACPI
tristate
select SND_SST_IPC
ASoC: Intel: document what Kconfig options do Document in comments what the options are supposed to mean, before clean-up in next patch. No functionality change here. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:55 +08:00
# This option controls the ACPI-based IPC for HiFi2 platforms
# (Baytrail, Cherrytrail)
config SND_SOC_INTEL_SST_ACPI
tristate
# This option controls ACPI-based probing on
# Haswell/Broadwell/Baytrail legacy and will be set
# when these platforms are enabled
ASoC: Intel: mrfld- add ACPI module Add the last ACPI module support which also uses core module like the PCI part Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-11 19:06:28 +08:00
ASoC: Intel: Add build support for Intel SST DSP core. This adds kernel build support for Intel SST core audio. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-17 21:32:10 +08:00
config SND_SOC_INTEL_SST
ASoC: intel - kconfig: remove SND_SOC_INTEL_SST prompt The SND_SOC_INTEL_SST is for common IPC lib and this should ideally be not selectable symbol but selected by respective machine driver So remove the prompt and get respective machines select it Signed-off-by: Vinod Koul <vinod.koul@intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-20 02:25:28 +08:00
tristate
ASoC: Intel: Add build support for Intel SST DSP core. This adds kernel build support for Intel SST core audio. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-17 21:32:10 +08:00
ASoC: intel: Fix sst-dsp dependency on dw stuff The recent commit [a92ea59b74e2: ASoC: Intel: sst: only select sst-firmware when DW DMAC is built-in] introduced more strict kconfig dependency (depends on DW_DMAC_CORE=y) for avoiding the build failures due to dependency messes in intel-sst. This makes, however, it impossible to use this driver with the modularized systems, i.e. typically on Linux distros. The problem addressed in the commit above is that sst_dsp_new() and sst_dsp_free() includes the firmware init / finish that call dw_*() functions. Thus building it as built-in with DW_DMAC_CORE module results in the missing symbols. However, these sst_dsp functions are basically called only from the drivers that depend on DW_DMAC_CORE already. That is, once when these functions are split out, the rest can be independent from dw stuff. This patch attempts to solve the issue by the following: - Split sst-dsp stuff into two modules: snd-soc-sst-dsp and snd-soc-sst-firmware. - Move sst_dsp_new() and sst_dsp_free() to the latter module so that the former module can be independent from DW_DMAC_CORE. - Add a new kconfig SND_SOC_INTEL_SST_FIRMWARE to select the latter module by machine drivers. One only remaining pitfall is that each machine driver has to select SND_SOC_INTEL_SST_FIRMWARE carefully depending on DW_DMAC_CORE. This can't be done cleanly due to the restriction of the current kbuild. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=988117 Fixes: a92ea59b74e2 ('ASoC: Intel: sst: only select sst-firmware when DW DMAC is built-in') Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-11 16:39:11 +08:00
config SND_SOC_INTEL_SST_FIRMWARE
tristate
ASoC: Intel: select DW_DMAC_CORE since it's mandatory Select DW_DMAC_CORE like the rest of glue drivers do, e.g. drivers/dma/dw/Kconfig. While here group selectors under SND_SOC_INTEL_HASWELL and SND_SOC_INTEL_BAYTRAIL. Make platforms, which are using a common SST firmware driver, to be dependent on DMADEVICES. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-16 21:12:26 +08:00
select DW_DMAC_CORE
ASoC: Intel: document what Kconfig options do Document in comments what the options are supposed to mean, before clean-up in next patch. No functionality change here. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:55 +08:00
# This option controls firmware download on
# Haswell/Broadwell/Baytrail legacy and will be set
# when these platforms are enabled
ASoC: Intel: Add build support for Intel SST DSP core. This adds kernel build support for Intel SST core audio. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-17 21:32:10 +08:00
ASoC: Intel: Add build support for Haswell ADSP Build the Haswell/Broadwell PCM, IPC and DSP drivers. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-21 05:48:46 +08:00
config SND_SOC_INTEL_HASWELL
ASoC: Intel: kconfig: drop boiler plate text from config items Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver for Intel" for machines.. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:36:01 +08:00
tristate "Haswell/Broadwell Platforms"
ASoC: Intel: Fix Kconfig with top-level selector Follow network example suggested by Linus, move Intel definitions in if/endif block and clarify in help text which options distro configurations should enable - everything except legacy Baytrail stuff and NOCODEC (test only) To avoid user confusion, machine drivers are handled with a submenu made dependent on this top-level selector. There should be no functionality change - except that sound capabilities are restored when using older configs without any user selection. Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered out by the top-level selector. This will change in the near future to allow for this option to be selected by both SST and SOF drivers (simplification with submenu for machine drivers by Vinod Koul) Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:53 +08:00
depends on SND_DMA_SGBUF
ASoC: Intel: Kconfig: Simplify-clarify ACPI/PCI dependencies PCI/ACPI selections should not happen in Kconfig for machine drivers, move to SOC selections. Add distinction between PCI and ACPI HiFi2 platforms and help text. There should be no functionality change. The PCI-based platforms may be removed at some point since Medfield is not really supported by anyone, and with Edison now defunct support for Merrifield/Edison is to be determined. The dependency on SND_DMA_SGBUF for Haswell is not clear at this point and may have to be further updated. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:54 +08:00
depends on DMADEVICES && ACPI
ASoC: Intel: select DW_DMAC_CORE since it's mandatory Select DW_DMAC_CORE like the rest of glue drivers do, e.g. drivers/dma/dw/Kconfig. While here group selectors under SND_SOC_INTEL_HASWELL and SND_SOC_INTEL_BAYTRAIL. Make platforms, which are using a common SST firmware driver, to be dependent on DMADEVICES. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-16 21:12:26 +08:00
select SND_SOC_INTEL_SST
ASoC: Intel: Fix nested/unnecessary Kconfig dependencies This patch fixes a number of issues: 1. IOSF_MBI is only needed for byt-cr detection, which is only supported on Baytrail/Cherrytrail, move to HiFi2 config 2. SND_SOC_INTEL_SST should not select SND_SOC_INTEL_SST_ACPI, the latter config is only valid for Haswell/Baytrail legacy but not needed by Skylake 3. SND_SST_IPC_ACPI, used only by the atom/sst driver, should not select SND_SOC_INTEL_SST, none of the code under common/sst*.c is used This nesting of configs really makes no sense, it's easier to maintain if for each platform one can control what is strictly required. Compiled-tested with each of Haswell, Baytrail legacy, HiFi2, SKL cases selected independently. 0-day and explicit randconfig tests did not report additional issues and no functionality loss was observed in Intel tests on HIFI2 and SKYLAKE platforms Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:56 +08:00
select SND_SOC_INTEL_SST_ACPI
ASoC: Intel: haswell depends on sst-firmware The Intel Haswell audio support fails to link if CONFIG_SND_SOC_INTEL_SST_FIRMWARE is disabled: sst-haswell-dsp.c: undefined reference to `sst_mem_block_register' sst-haswell-dsp.c: undefined reference to `sst_mem_block_unregister_all' sst-haswell-dsp.c: undefined reference to `sst_module_alloc_blocks' sst-haswell-dsp.c: undefined reference to `sst_module_free' sst-haswell-dsp.c: undefined reference to `sst_module_new' sst-haswell-pcm.c: undefined reference to `sst_module_get_from_id' sst-haswell-pcm.c: undefined reference to `sst_module_runtime_restore' sst-haswell-pcm.c: undefined reference to `sst_module_runtime_save' ERROR: "sst_block_alloc_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_block_free_scratch" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_copyfrom" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_copyto" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_get_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_dma_put_channel" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_free" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_get_offset" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_dsp_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_free_all" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_reload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_fw_unload" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_alloc_blocks" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_get_from_id" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! ERROR: "sst_module_runtime_new" [sound/soc/intel/haswell/snd-soc-sst-haswell-pcm.ko] undefined! This moves the 'select' statement from two of the three haswell based users into the line that is used by all of them, so make it harder to get wrong and to fix the existing randconfig regressions. Fixes: 2d995e5dc283 ("ASoC: Intel: boards: Add bdw-rt5677 machine driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-10-10 20:33:20 +08:00
select SND_SOC_INTEL_SST_FIRMWARE
ASoC: Intel: Fix Kconfig with top-level selector Follow network example suggested by Linus, move Intel definitions in if/endif block and clarify in help text which options distro configurations should enable - everything except legacy Baytrail stuff and NOCODEC (test only) To avoid user confusion, machine drivers are handled with a submenu made dependent on this top-level selector. There should be no functionality change - except that sound capabilities are restored when using older configs without any user selection. Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered out by the top-level selector. This will change in the near future to allow for this option to be selected by both SST and SOF drivers (simplification with submenu for machine drivers by Vinod Koul) Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:53 +08:00
select SND_SOC_ACPI_INTEL_MATCH
help
If you have a Intel Haswell or Broadwell platform connected to
an I2S codec, then enable this option by saying Y or m. This is
typically used for Chromebooks. This is a recommended option.
ASoC: Intel: Add Haswell Machine support Add support for Haswell based machines with SST DSP audio. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-21 05:48:47 +08:00
ASoC: Intel: Add build support for Baytrail SST Enable build support for Baytrail SST DSP platform and byt-rt5640 machine drivers. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-24 23:27:02 +08:00
config SND_SOC_INTEL_BAYTRAIL
ASoC: Intel: kconfig: drop boiler plate text from config items Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver for Intel" for machines.. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:36:01 +08:00
tristate "Baytrail (legacy) Platforms"
ASoC: Intel: Kconfig: Simplify-clarify ACPI/PCI dependencies PCI/ACPI selections should not happen in Kconfig for machine drivers, move to SOC selections. Add distinction between PCI and ACPI HiFi2 platforms and help text. There should be no functionality change. The PCI-based platforms may be removed at some point since Medfield is not really supported by anyone, and with Edison now defunct support for Merrifield/Edison is to be determined. The dependency on SND_DMA_SGBUF for Haswell is not clear at this point and may have to be further updated. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:54 +08:00
depends on DMADEVICES && ACPI
ASoC: Intel: select DW_DMAC_CORE since it's mandatory Select DW_DMAC_CORE like the rest of glue drivers do, e.g. drivers/dma/dw/Kconfig. While here group selectors under SND_SOC_INTEL_HASWELL and SND_SOC_INTEL_BAYTRAIL. Make platforms, which are using a common SST firmware driver, to be dependent on DMADEVICES. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-16 21:12:26 +08:00
select SND_SOC_INTEL_SST
ASoC: Intel: Fix nested/unnecessary Kconfig dependencies This patch fixes a number of issues: 1. IOSF_MBI is only needed for byt-cr detection, which is only supported on Baytrail/Cherrytrail, move to HiFi2 config 2. SND_SOC_INTEL_SST should not select SND_SOC_INTEL_SST_ACPI, the latter config is only valid for Haswell/Baytrail legacy but not needed by Skylake 3. SND_SST_IPC_ACPI, used only by the atom/sst driver, should not select SND_SOC_INTEL_SST, none of the code under common/sst*.c is used This nesting of configs really makes no sense, it's easier to maintain if for each platform one can control what is strictly required. Compiled-tested with each of Haswell, Baytrail legacy, HiFi2, SKL cases selected independently. 0-day and explicit randconfig tests did not report additional issues and no functionality loss was observed in Intel tests on HIFI2 and SKYLAKE platforms Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:56 +08:00
select SND_SOC_INTEL_SST_ACPI
ASoC: Intel: select DW_DMAC_CORE since it's mandatory Select DW_DMAC_CORE like the rest of glue drivers do, e.g. drivers/dma/dw/Kconfig. While here group selectors under SND_SOC_INTEL_HASWELL and SND_SOC_INTEL_BAYTRAIL. Make platforms, which are using a common SST firmware driver, to be dependent on DMADEVICES. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-16 21:12:26 +08:00
select SND_SOC_INTEL_SST_FIRMWARE
ASoC: Intel: Fix Kconfig with top-level selector Follow network example suggested by Linus, move Intel definitions in if/endif block and clarify in help text which options distro configurations should enable - everything except legacy Baytrail stuff and NOCODEC (test only) To avoid user confusion, machine drivers are handled with a submenu made dependent on this top-level selector. There should be no functionality change - except that sound capabilities are restored when using older configs without any user selection. Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered out by the top-level selector. This will change in the near future to allow for this option to be selected by both SST and SOF drivers (simplification with submenu for machine drivers by Vinod Koul) Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:53 +08:00
select SND_SOC_ACPI_INTEL_MATCH
help
If you have a Intel Baytrail platform connected to an I2S codec,
then enable this option by saying Y or m. This was typically used
for Baytrail Chromebooks but this option is now deprecated and is
not recommended, use SND_SST_ATOM_HIFI2_PLATFORM instead.
ASoC: Intel: Add build support for Baytrail SST Enable build support for Baytrail SST DSP platform and byt-rt5640 machine drivers. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@intel.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-24 23:27:02 +08:00
ASoC: Intel: Kconfig: Simplify-clarify ACPI/PCI dependencies PCI/ACPI selections should not happen in Kconfig for machine drivers, move to SOC selections. Add distinction between PCI and ACPI HiFi2 platforms and help text. There should be no functionality change. The PCI-based platforms may be removed at some point since Medfield is not really supported by anyone, and with Edison now defunct support for Merrifield/Edison is to be determined. The dependency on SND_DMA_SGBUF for Haswell is not clear at this point and may have to be further updated. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:54 +08:00
config SND_SST_ATOM_HIFI2_PLATFORM_PCI
ASoC: Intel: kconfig: drop boiler plate text from config items Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver for Intel" for machines.. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:36:01 +08:00
tristate "PCI HiFi2 (Medfield, Merrifield) Platforms"
ASoC: Intel: Kconfig: Simplify-clarify ACPI/PCI dependencies PCI/ACPI selections should not happen in Kconfig for machine drivers, move to SOC selections. Add distinction between PCI and ACPI HiFi2 platforms and help text. There should be no functionality change. The PCI-based platforms may be removed at some point since Medfield is not really supported by anyone, and with Edison now defunct support for Merrifield/Edison is to be determined. The dependency on SND_DMA_SGBUF for Haswell is not clear at this point and may have to be further updated. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:54 +08:00
depends on X86 && PCI
select SND_SST_IPC_PCI
select SND_SOC_COMPRESS
help
If you have a Intel Medfield or Merrifield/Edison platform, then
enable this option by saying Y or m. Distros will typically not
enable this option: Medfield devices are not available to
developers and while Merrifield/Edison can run a mainline kernel with
limited functionality it will require a firmware file which
is not in the standard firmware tree
ASoC: Intel: clarify Kconfig dependencies Introduce more logical dependencies, with the SOC selected first and the relevant machine drivers are exposed. The same mechanism will be used for SOF support. Also select SND_SOC_ACPI_INTEL_MATCH for all machine drivers Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-13 07:49:45 +08:00
config SND_SST_ATOM_HIFI2_PLATFORM
ASoC: Intel: kconfig: drop boiler plate text from config items Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver for Intel" for machines.. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:36:01 +08:00
tristate "ACPI HiFi2 (Baytrail, Cherrytrail) Platforms"
ASoC: Intel: Kconfig: Simplify-clarify ACPI/PCI dependencies PCI/ACPI selections should not happen in Kconfig for machine drivers, move to SOC selections. Add distinction between PCI and ACPI HiFi2 platforms and help text. There should be no functionality change. The PCI-based platforms may be removed at some point since Medfield is not really supported by anyone, and with Edison now defunct support for Merrifield/Edison is to be determined. The dependency on SND_DMA_SGBUF for Haswell is not clear at this point and may have to be further updated. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:54 +08:00
depends on X86 && ACPI
select SND_SST_IPC_ACPI
ASoC: Intel: clarify Kconfig dependencies Introduce more logical dependencies, with the SOC selected first and the relevant machine drivers are exposed. The same mechanism will be used for SOF support. Also select SND_SOC_ACPI_INTEL_MATCH for all machine drivers Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-13 07:49:45 +08:00
select SND_SOC_COMPRESS
ASoC: Intel: Fix Kconfig with top-level selector Follow network example suggested by Linus, move Intel definitions in if/endif block and clarify in help text which options distro configurations should enable - everything except legacy Baytrail stuff and NOCODEC (test only) To avoid user confusion, machine drivers are handled with a submenu made dependent on this top-level selector. There should be no functionality change - except that sound capabilities are restored when using older configs without any user selection. Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered out by the top-level selector. This will change in the near future to allow for this option to be selected by both SST and SOF drivers (simplification with submenu for machine drivers by Vinod Koul) Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:53 +08:00
select SND_SOC_ACPI_INTEL_MATCH
ASoC: Intel: Fix nested/unnecessary Kconfig dependencies This patch fixes a number of issues: 1. IOSF_MBI is only needed for byt-cr detection, which is only supported on Baytrail/Cherrytrail, move to HiFi2 config 2. SND_SOC_INTEL_SST should not select SND_SOC_INTEL_SST_ACPI, the latter config is only valid for Haswell/Baytrail legacy but not needed by Skylake 3. SND_SST_IPC_ACPI, used only by the atom/sst driver, should not select SND_SOC_INTEL_SST, none of the code under common/sst*.c is used This nesting of configs really makes no sense, it's easier to maintain if for each platform one can control what is strictly required. Compiled-tested with each of Haswell, Baytrail legacy, HiFi2, SKL cases selected independently. 0-day and explicit randconfig tests did not report additional issues and no functionality loss was observed in Intel tests on HIFI2 and SKYLAKE platforms Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:56 +08:00
select IOSF_MBI
ASoC: Intel: Kconfig: Simplify-clarify ACPI/PCI dependencies PCI/ACPI selections should not happen in Kconfig for machine drivers, move to SOC selections. Add distinction between PCI and ACPI HiFi2 platforms and help text. There should be no functionality change. The PCI-based platforms may be removed at some point since Medfield is not really supported by anyone, and with Edison now defunct support for Merrifield/Edison is to be determined. The dependency on SND_DMA_SGBUF for Haswell is not clear at this point and may have to be further updated. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:54 +08:00
help
If you have a Intel Baytrail or Cherrytrail platform with an I2S
codec, then enable this option by saying Y or m. This is a
recommended option
ASoC: Intel: clarify Kconfig dependencies Introduce more logical dependencies, with the SOC selected first and the relevant machine drivers are exposed. The same mechanism will be used for SOF support. Also select SND_SOC_ACPI_INTEL_MATCH for all machine drivers Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-13 07:49:45 +08:00
ASoC: Intel: Skylake: Add ssp clock driver For certain platforms, it is required to start the clocks (mclk/sclk/fs) before the stream start. Example: for few chrome systems, codec needs the mclk/sclk to be enabled early for a successful clock synchronization and for few IVI platforms, clock need to be enabled at boot and should be ON always. Add the required structures and create set_dma_control ipc to enable or disable the clock. To enable sclk without fs, mclk ipc structure is used, else sclkfs ipc structure is used. Clock prepare/unprepare are used to enable/disable the clock as the IPC will be sent in non-atomic context. The clk set_dma_control IPC structures are populated during the set_rate callback and IPC is sent to enable the clock during prepare callback. This patch creates virtual clock driver, which allows the machine driver to use the clock interface to send IPCs to DSP to enable/disable the clocks. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-04 19:25:14 +08:00
config SND_SOC_INTEL_SKYLAKE_SSP_CLK
tristate
ASoC: Intel: Add makefile support for SKL driver This adds makefile and Kconfig to enable Skylake HD audio PCM driver Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-09 17:50:10 +08:00
config SND_SOC_INTEL_SKYLAKE
ASoC: Intel: kconfig: drop boiler plate text from config items Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver for Intel" for machines.. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:36:01 +08:00
tristate "SKL/BXT/KBL/GLK/CNL... Platforms"
ASoC: Intel: Fix Kconfig with top-level selector Follow network example suggested by Linus, move Intel definitions in if/endif block and clarify in help text which options distro configurations should enable - everything except legacy Baytrail stuff and NOCODEC (test only) To avoid user confusion, machine drivers are handled with a submenu made dependent on this top-level selector. There should be no functionality change - except that sound capabilities are restored when using older configs without any user selection. Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered out by the top-level selector. This will change in the near future to allow for this option to be selected by both SST and SOF drivers (simplification with submenu for machine drivers by Vinod Koul) Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:53 +08:00
depends on PCI && ACPI
ASoC: Intel: Add makefile support for SKL driver This adds makefile and Kconfig to enable Skylake HD audio PCM driver Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-09 17:50:10 +08:00
select SND_HDA_EXT_CORE
ASoC: Intel: Bxtn: Add Broxton DSP support Broxton DSP is mostly similar to Skylake one but with subtle differences like no Code Load DMA and uses HDA DMA for code loading, DSP D0 and D3 sequences are different. These changes are comprehended by adding different DSP power up and down handlers, and new loader ops and also adding prepare and trigger which HDA DSP DMA requires Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: GuruprasadX Pawse <guruprasadx.pawse@intel.com> Signed-off-by: Kranthi G <gudishax.kranthikumar@intel.com> Signed-off-by: Dharageswari R <dharageswari.r@intel.com> Signed-off-by: Ramesh Babu <ramesh.babu@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-11 12:42:56 +08:00
select SND_HDA_DSP_LOADER
ASoC: Intel: Skylake: Add topology core init and handlers The SKL driver does not code DSP topology in driver. It uses the newly added ASoC topology core to parse the topology information (controls, widgets and map) from topology binary. Each topology element passed private data which contains information that driver used to identify the module instance within firmware and send IPCs for that module to DSP firmware along with parameters. This patch adds init routine to invoke topology load and callback for topology creation. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-07 18:31:56 +08:00
select SND_SOC_TOPOLOGY
ASoC: Intel: Add Skylake IPC library This adds base SKL IPC library which uses common SST IPC lib. Here we add definition for IPC types, sending and receiving IPC messages from aDSP, handling interrupt, sending different types of messages etc Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-10 00:08:54 +08:00
select SND_SOC_INTEL_SST
ASoC: Intel: Fix Kconfig with top-level selector Follow network example suggested by Linus, move Intel definitions in if/endif block and clarify in help text which options distro configurations should enable - everything except legacy Baytrail stuff and NOCODEC (test only) To avoid user confusion, machine drivers are handled with a submenu made dependent on this top-level selector. There should be no functionality change - except that sound capabilities are restored when using older configs without any user selection. Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered out by the top-level selector. This will change in the near future to allow for this option to be selected by both SST and SOF drivers (simplification with submenu for machine drivers by Vinod Koul) Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-05 06:35:53 +08:00
select SND_SOC_ACPI_INTEL_MATCH
help
If you have a Intel Skylake/Broxton/ApolloLake/KabyLake/
GeminiLake or CannonLake platform with the DSP enabled in the BIOS
then enable this option by saying Y or m.
config SND_SOC_ACPI_INTEL_MATCH
tristate
select SND_SOC_ACPI if ACPI
# this option controls the compilation of ACPI matching tables and
# helpers and is not meant to be selected by the user.
endif ## SND_SOC_INTEL_SST_TOPLEVEL
ASoC: Intel: Skylake - Add Skylake RT286 I2S machine driver Add the SKL I2S machine driver using Realtek ALC286S codec in I2S mode. Signed-off-by: Omair M Abdullah <omair.m.abdullah@intel.com> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-14 23:41:43 +08:00
ASoC: Intel: move machine drivers to dedicated KConfig split Kconfig to prepare for reuse of machine drivers for SOF support no functional change or edits Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-13 07:49:43 +08:00
# ASoC codec drivers
source "sound/soc/intel/boards/Kconfig"