OpenCloudOS-Kernel/arch/x86/kernel/idt.c

368 lines
9.4 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Interrupt descriptor table related code
*/
#include <linux/interrupt.h>
#include <asm/traps.h>
#include <asm/proto.h>
#include <asm/desc.h>
x86: Don't include linux/irq.h from asm/hardirq.h The next patch in this series will have to make the definition of irq_cpustat_t available to entering_irq(). Inclusion of asm/hardirq.h into asm/apic.h would cause circular header dependencies like asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/topology.h linux/smp.h asm/smp.h or linux/gfp.h linux/mmzone.h asm/mmzone.h asm/mmzone_64.h asm/smp.h asm/apic.h asm/hardirq.h linux/irq.h linux/irqdesc.h linux/kobject.h linux/sysfs.h linux/kernfs.h linux/idr.h linux/gfp.h and others. This causes compilation errors because of the header guards becoming effective in the second inclusion: symbols/macros that had been defined before wouldn't be available to intermediate headers in the #include chain anymore. A possible workaround would be to move the definition of irq_cpustat_t into its own header and include that from both, asm/hardirq.h and asm/apic.h. However, this wouldn't solve the real problem, namely asm/harirq.h unnecessarily pulling in all the linux/irq.h cruft: nothing in asm/hardirq.h itself requires it. Also, note that there are some other archs, like e.g. arm64, which don't have that #include in their asm/hardirq.h. Remove the linux/irq.h #include from x86' asm/hardirq.h. Fix resulting compilation errors by adding appropriate #includes to *.c files as needed. Note that some of these *.c files could be cleaned up a bit wrt. to their set of #includes, but that should better be done from separate patches, if at all. Signed-off-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2018-07-29 18:15:33 +08:00
#include <asm/hw_irq.h>
struct idt_data {
unsigned int vector;
unsigned int segment;
struct idt_bits bits;
const void *addr;
};
#define DPL0 0x0
#define DPL3 0x3
#define DEFAULT_STACK 0
#define G(_vector, _addr, _ist, _type, _dpl, _segment) \
{ \
.vector = _vector, \
.bits.ist = _ist, \
.bits.type = _type, \
.bits.dpl = _dpl, \
.bits.p = 1, \
.addr = _addr, \
.segment = _segment, \
}
/* Interrupt gate */
#define INTG(_vector, _addr) \
G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL0, __KERNEL_CS)
/* System interrupt gate */
#define SYSG(_vector, _addr) \
G(_vector, _addr, DEFAULT_STACK, GATE_INTERRUPT, DPL3, __KERNEL_CS)
/*
* Interrupt gate with interrupt stack. The _ist index is the index in
* the tss.ist[] array, but for the descriptor it needs to start at 1.
*/
#define ISTG(_vector, _addr, _ist) \
G(_vector, _addr, _ist + 1, GATE_INTERRUPT, DPL0, __KERNEL_CS)
/* Task gate */
#define TSKG(_vector, _gdt) \
G(_vector, NULL, DEFAULT_STACK, GATE_TASK, DPL0, _gdt << 3)
/*
* Early traps running on the DEFAULT_STACK because the other interrupt
* stacks work only after cpu_init().
*/
static const __initconst struct idt_data early_idts[] = {
INTG(X86_TRAP_DB, debug),
SYSG(X86_TRAP_BP, int3),
#ifdef CONFIG_X86_32
INTG(X86_TRAP_PF, page_fault),
#endif
};
/*
* The default IDT entries which are set up in trap_init() before
* cpu_init() is invoked. Interrupt stacks cannot be used at that point and
* the traps which use them are reinitialized with IST after cpu_init() has
* set up TSS.
*/
static const __initconst struct idt_data def_idts[] = {
INTG(X86_TRAP_DE, divide_error),
INTG(X86_TRAP_NMI, nmi),
INTG(X86_TRAP_BR, bounds),
INTG(X86_TRAP_UD, invalid_op),
INTG(X86_TRAP_NM, device_not_available),
INTG(X86_TRAP_OLD_MF, coprocessor_segment_overrun),
INTG(X86_TRAP_TS, invalid_TSS),
INTG(X86_TRAP_NP, segment_not_present),
INTG(X86_TRAP_SS, stack_segment),
INTG(X86_TRAP_GP, general_protection),
INTG(X86_TRAP_SPURIOUS, spurious_interrupt_bug),
INTG(X86_TRAP_MF, coprocessor_error),
INTG(X86_TRAP_AC, alignment_check),
INTG(X86_TRAP_XF, simd_coprocessor_error),
#ifdef CONFIG_X86_32
TSKG(X86_TRAP_DF, GDT_ENTRY_DOUBLEFAULT_TSS),
#else
INTG(X86_TRAP_DF, double_fault),
#endif
INTG(X86_TRAP_DB, debug),
#ifdef CONFIG_X86_MCE
INTG(X86_TRAP_MC, &machine_check),
#endif
SYSG(X86_TRAP_OF, overflow),
#if defined(CONFIG_IA32_EMULATION)
SYSG(IA32_SYSCALL_VECTOR, entry_INT80_compat),
#elif defined(CONFIG_X86_32)
SYSG(IA32_SYSCALL_VECTOR, entry_INT80_32),
#endif
};
/*
* The APIC and SMP idt entries
*/
static const __initconst struct idt_data apic_idts[] = {
#ifdef CONFIG_SMP
INTG(RESCHEDULE_VECTOR, reschedule_interrupt),
INTG(CALL_FUNCTION_VECTOR, call_function_interrupt),
INTG(CALL_FUNCTION_SINGLE_VECTOR, call_function_single_interrupt),
INTG(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt),
INTG(REBOOT_VECTOR, reboot_interrupt),
#endif
#ifdef CONFIG_X86_THERMAL_VECTOR
INTG(THERMAL_APIC_VECTOR, thermal_interrupt),
#endif
#ifdef CONFIG_X86_MCE_THRESHOLD
INTG(THRESHOLD_APIC_VECTOR, threshold_interrupt),
#endif
#ifdef CONFIG_X86_MCE_AMD
INTG(DEFERRED_ERROR_VECTOR, deferred_error_interrupt),
#endif
#ifdef CONFIG_X86_LOCAL_APIC
INTG(LOCAL_TIMER_VECTOR, apic_timer_interrupt),
INTG(X86_PLATFORM_IPI_VECTOR, x86_platform_ipi),
# ifdef CONFIG_HAVE_KVM
INTG(POSTED_INTR_VECTOR, kvm_posted_intr_ipi),
INTG(POSTED_INTR_WAKEUP_VECTOR, kvm_posted_intr_wakeup_ipi),
INTG(POSTED_INTR_NESTED_VECTOR, kvm_posted_intr_nested_ipi),
# endif
# ifdef CONFIG_IRQ_WORK
INTG(IRQ_WORK_VECTOR, irq_work_interrupt),
# endif
#ifdef CONFIG_X86_UV
INTG(UV_BAU_MESSAGE, uv_bau_message_intr1),
#endif
INTG(SPURIOUS_APIC_VECTOR, spurious_interrupt),
INTG(ERROR_APIC_VECTOR, error_interrupt),
#endif
};
#ifdef CONFIG_X86_64
/*
* Early traps running on the DEFAULT_STACK because the other interrupt
* stacks work only after cpu_init().
*/
static const __initconst struct idt_data early_pf_idts[] = {
INTG(X86_TRAP_PF, page_fault),
};
/*
* Override for the debug_idt. Same as the default, but with interrupt
* stack set to DEFAULT_STACK (0). Required for NMI trap handling.
*/
static const __initconst struct idt_data dbg_idts[] = {
INTG(X86_TRAP_DB, debug),
};
#endif
/* Must be page-aligned because the real IDT is used in a fixmap. */
gate_desc idt_table[IDT_ENTRIES] __page_aligned_bss;
struct desc_ptr idt_descr __ro_after_init = {
.size = (IDT_ENTRIES * 2 * sizeof(unsigned long)) - 1,
.address = (unsigned long) idt_table,
};
#ifdef CONFIG_X86_64
/* No need to be aligned, but done to keep all IDTs defined the same way. */
gate_desc debug_idt_table[IDT_ENTRIES] __page_aligned_bss;
/*
* The exceptions which use Interrupt stacks. They are setup after
* cpu_init() when the TSS has been initialized.
*/
static const __initconst struct idt_data ist_idts[] = {
ISTG(X86_TRAP_DB, debug, IST_INDEX_DB),
ISTG(X86_TRAP_NMI, nmi, IST_INDEX_NMI),
ISTG(X86_TRAP_DF, double_fault, IST_INDEX_DF),
#ifdef CONFIG_X86_MCE
ISTG(X86_TRAP_MC, &machine_check, IST_INDEX_MCE),
#endif
};
/*
* Override for the debug_idt. Same as the default, but with interrupt
* stack set to DEFAULT_STACK (0). Required for NMI trap handling.
*/
const struct desc_ptr debug_idt_descr = {
.size = IDT_ENTRIES * 16 - 1,
.address = (unsigned long) debug_idt_table,
};
#endif
static inline void idt_init_desc(gate_desc *gate, const struct idt_data *d)
{
unsigned long addr = (unsigned long) d->addr;
gate->offset_low = (u16) addr;
gate->segment = (u16) d->segment;
gate->bits = d->bits;
gate->offset_middle = (u16) (addr >> 16);
#ifdef CONFIG_X86_64
gate->offset_high = (u32) (addr >> 32);
gate->reserved = 0;
#endif
}
static void
idt_setup_from_table(gate_desc *idt, const struct idt_data *t, int size, bool sys)
{
gate_desc desc;
for (; size > 0; t++, size--) {
idt_init_desc(&desc, t);
write_idt_entry(idt, t->vector, &desc);
if (sys)
set_bit(t->vector, system_vectors);
}
}
static void set_intr_gate(unsigned int n, const void *addr)
{
struct idt_data data;
BUG_ON(n > 0xFF);
memset(&data, 0, sizeof(data));
data.vector = n;
data.addr = addr;
data.segment = __KERNEL_CS;
data.bits.type = GATE_INTERRUPT;
data.bits.p = 1;
idt_setup_from_table(idt_table, &data, 1, false);
}
/**
* idt_setup_early_traps - Initialize the idt table with early traps
*
* On X8664 these traps do not use interrupt stacks as they can't work
* before cpu_init() is invoked and sets up TSS. The IST variants are
* installed after that.
*/
void __init idt_setup_early_traps(void)
{
idt_setup_from_table(idt_table, early_idts, ARRAY_SIZE(early_idts),
true);
load_idt(&idt_descr);
}
/**
* idt_setup_traps - Initialize the idt table with default traps
*/
void __init idt_setup_traps(void)
{
idt_setup_from_table(idt_table, def_idts, ARRAY_SIZE(def_idts), true);
}
#ifdef CONFIG_X86_64
/**
* idt_setup_early_pf - Initialize the idt table with early pagefault handler
*
* On X8664 this does not use interrupt stacks as they can't work before
* cpu_init() is invoked and sets up TSS. The IST variant is installed
* after that.
*
* FIXME: Why is 32bit and 64bit installing the PF handler at different
* places in the early setup code?
*/
void __init idt_setup_early_pf(void)
{
idt_setup_from_table(idt_table, early_pf_idts,
ARRAY_SIZE(early_pf_idts), true);
}
/**
* idt_setup_ist_traps - Initialize the idt table with traps using IST
*/
void __init idt_setup_ist_traps(void)
{
idt_setup_from_table(idt_table, ist_idts, ARRAY_SIZE(ist_idts), true);
}
/**
* idt_setup_debugidt_traps - Initialize the debug idt table with debug traps
*/
void __init idt_setup_debugidt_traps(void)
{
memcpy(&debug_idt_table, &idt_table, IDT_ENTRIES * 16);
idt_setup_from_table(debug_idt_table, dbg_idts, ARRAY_SIZE(dbg_idts), false);
}
#endif
/**
* idt_setup_apic_and_irq_gates - Setup APIC/SMP and normal interrupt gates
*/
void __init idt_setup_apic_and_irq_gates(void)
{
int i = FIRST_EXTERNAL_VECTOR;
void *entry;
idt_setup_from_table(idt_table, apic_idts, ARRAY_SIZE(apic_idts), true);
for_each_clear_bit_from(i, system_vectors, FIRST_SYSTEM_VECTOR) {
entry = irq_entries_start + 8 * (i - FIRST_EXTERNAL_VECTOR);
set_intr_gate(i, entry);
}
#ifdef CONFIG_X86_LOCAL_APIC
for_each_clear_bit_from(i, system_vectors, NR_VECTORS) {
set_bit(i, system_vectors);
x86/irq: Seperate unused system vectors from spurious entry again Quite some time ago the interrupt entry stubs for unused vectors in the system vector range got removed and directly mapped to the spurious interrupt vector entry point. Sounds reasonable, but it's subtly broken. The spurious interrupt vector entry point pushes vector number 0xFF on the stack which makes the whole logic in __smp_spurious_interrupt() pointless. As a consequence any spurious interrupt which comes from a vector != 0xFF is treated as a real spurious interrupt (vector 0xFF) and not acknowledged. That subsequently stalls all interrupt vectors of equal and lower priority, which brings the system to a grinding halt. This can happen because even on 64-bit the system vector space is not guaranteed to be fully populated. A full compile time handling of the unused vectors is not possible because quite some of them are conditonally populated at runtime. Bring the entry stubs back, which wastes 160 bytes if all stubs are unused, but gains the proper handling back. There is no point to selectively spare some of the stubs which are known at compile time as the required code in the IDT management would be way larger and convoluted. Do not route the spurious entries through common_interrupt and do_IRQ() as the original code did. Route it to smp_spurious_interrupt() which evaluates the vector number and acts accordingly now that the real vector numbers are handed in. Fixup the pr_warn so the actual spurious vector (0xff) is clearly distiguished from the other vectors and also note for the vectored case whether it was pending in the ISR or not. "Spurious APIC interrupt (vector 0xFF) on CPU#0, should never happen." "Spurious interrupt vector 0xed on CPU#1. Acked." "Spurious interrupt vector 0xee on CPU#1. Not pending!." Fixes: 2414e021ac8d ("x86: Avoid building unused IRQ entry stubs") Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Jan Beulich <jbeulich@suse.com> Link: https://lkml.kernel.org/r/20190628111440.550568228@linutronix.de
2019-06-28 19:11:54 +08:00
entry = spurious_entries_start + 8 * (i - FIRST_SYSTEM_VECTOR);
set_intr_gate(i, entry);
}
#endif
}
/**
* idt_setup_early_handler - Initializes the idt table with early handlers
*/
void __init idt_setup_early_handler(void)
{
int i;
for (i = 0; i < NUM_EXCEPTION_VECTORS; i++)
set_intr_gate(i, early_idt_handler_array[i]);
#ifdef CONFIG_X86_32
for ( ; i < NR_VECTORS; i++)
set_intr_gate(i, early_ignore_irq);
#endif
load_idt(&idt_descr);
}
/**
* idt_invalidate - Invalidate interrupt descriptor table
* @addr: The virtual address of the 'invalid' IDT
*/
void idt_invalidate(void *addr)
{
struct desc_ptr idt = { .address = (unsigned long) addr, .size = 0 };
load_idt(&idt);
}
void __init update_intr_gate(unsigned int n, const void *addr)
{
if (WARN_ON_ONCE(!test_bit(n, system_vectors)))
return;
set_intr_gate(n, addr);
}
void alloc_intr_gate(unsigned int n, const void *addr)
{
BUG_ON(n < FIRST_SYSTEM_VECTOR);
if (!test_and_set_bit(n, system_vectors))
set_intr_gate(n, addr);
}