UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/include/linux/hid-sensor-ids.h

177 lines
7.4 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 111 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 07:57:49 +08:00
/* SPDX-License-Identifier: GPL-2.0-only */
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
/*
* HID Sensors Driver
* Copyright (c) 2012, Intel Corporation.
*/
#ifndef _HID_SENSORS_IDS_H
#define _HID_SENSORS_IDS_H
#define HID_MAX_PHY_DEVICES 0xFF
HID: hid-sensor-hub: Add support for application collection Section 4.2.5 of HID Sensor hub specification allows two methods defining sensor devices. - Each sensor device by its own collection - A top level application collection object, including multiple sensors. In the first method, each sensor can be in its own sensor application collection without a physical collection. In the second method there is a usage id for collection type, which is defined as an application collection, with multiple physical collections in it. It is possible to define fusion sensor with this and may have its own handler. If there is a callback registered for the collection type, then forward all reports for sensors in its collection to this handler. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-02-20 07:31:26 +08:00
#define HID_USAGE_SENSOR_COLLECTION 0x200001
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
/* Accel 3D (200073) */
#define HID_USAGE_SENSOR_ACCEL_3D 0x200073
iio: hid-sensors: accelerometer: Add sensitivity A number of Properties that can be applied to Data Fields are per data field basis or for all data fields. Adding sensitivity field for all accelerometer fields, which is most commonly used in currently available sensor hubs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-31 06:48:00 +08:00
#define HID_USAGE_SENSOR_DATA_ACCELERATION 0x200452
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
#define HID_USAGE_SENSOR_ACCEL_X_AXIS 0x200453
#define HID_USAGE_SENSOR_ACCEL_Y_AXIS 0x200454
#define HID_USAGE_SENSOR_ACCEL_Z_AXIS 0x200455
/* ALS (200041) */
#define HID_USAGE_SENSOR_ALS 0x200041
iio: hid-sensors: light/als : Add sensitivity A number of Properties that can be applied to Data Fields are per data field basis or for all data fields. Adding sensitivity field for all als fields, which is most commonly used in currently available sensor hubs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-31 06:48:00 +08:00
#define HID_USAGE_SENSOR_DATA_LIGHT 0x2004d0
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
#define HID_USAGE_SENSOR_LIGHT_ILLUM 0x2004d1
iio: hid-sensors: Added Proximity Sensor Driver Added usage id processing for Proximity (Human Presence). This uses IIO interfaces for triggered buffer to present data to user mode. This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-20 14:29:00 +08:00
/* PROX (200011) */
#define HID_USAGE_SENSOR_PROX 0x200011
#define HID_USAGE_SENSOR_DATA_PRESENCE 0x2004b0
#define HID_USAGE_SENSOR_HUMAN_PRESENCE 0x2004b1
iio: hid-sensors: Added Pressure Sensor driver Added usage id processing for Pressure Sensor. This uses IIO interfaces for triggered buffer to present data to user mode. This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-02-20 14:30:00 +08:00
/* Pressure (200031) */
#define HID_USAGE_SENSOR_PRESSURE 0x200031
#define HID_USAGE_SENSOR_DATA_ATMOSPHERIC_PRESSURE 0x200430
#define HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE 0x200431
iio: hid: Add temperature sensor support Environmental temperature sensor is a hid defined sensor, it measures temperature. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR39b.pdf According to IIO ABI definition, IIO_TEMP data output unit is milli degrees Celsius. Add the unit convert from degree to milli degree. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-03 21:44:32 +08:00
/* Tempreture (200033) */
#define HID_USAGE_SENSOR_TEMPERATURE 0x200033
#define HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE 0x200434
iio: hid: Add humidity sensor support Environmental humidity sensor is a hid defined sensor, it shows raw humidity measurement of air. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR39b.pdf According to IIO ABI definition, humidityrelative data output unit is milli percent. Add the unit convert from percent to milli percent. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-03-20 22:28:45 +08:00
/* humidity */
#define HID_USAGE_SENSOR_HUMIDITY 0x200032
#define HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY 0x200433
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
/* Gyro 3D: (200076) */
#define HID_USAGE_SENSOR_GYRO_3D 0x200076
iio: hid-sensors: gyro : Add sensitivity A number of Properties that can be applied to Data Fields are per data field basis or for all data fields. Adding sensitivity field for all gyro fields, which is most commonly used in currently available sensor hubs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-31 06:48:00 +08:00
#define HID_USAGE_SENSOR_DATA_ANGL_VELOCITY 0x200456
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
#define HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS 0x200457
#define HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS 0x200458
#define HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS 0x200459
iio: Add gravity sensor support Gravity sensor is a soft sensor, which derives value from standard accelerometer device by filtering out the acceleration which is not caused by gravity. Gravity sensor provides a three dimensional vector indicating the direction and magnitude of gravity. Typically, this sensor is used to determine the device's relative orientation in space. The units and the coordinate system is the same as the one used by the acceleration sensor. When a device is at rest, the output of the gravity sensor should be identical to that of the accelerometer. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf Gravity sensor and accelerometer have similar channels and share channel usage ids. So the most of the code for accel_3d can be reused. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-05 18:24:04 +08:00
/* Gravity vector */
#define HID_USAGE_SENSOR_GRAVITY_VECTOR 0x20007B
HID: hid-sensor-hub: fix style of comments This patch fixes the style of the comments to be like following /* The commentary */ There is no functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-08-14 16:07:08 +08:00
/* ORIENTATION: Compass 3D: (200083) */
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
#define HID_USAGE_SENSOR_COMPASS_3D 0x200083
iio: hid-sensors: magnetometer : Add sensitivity A number of Properties that can be applied to Data Fields are per data field basis or for all data fields. Adding sensitivity field for all magnetometer fields, which is most commonly used in currently available sensor hubs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-06 08:11:00 +08:00
#define HID_USAGE_SENSOR_DATA_ORIENTATION 0x200470
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
#define HID_USAGE_SENSOR_ORIENT_MAGN_HEADING 0x200471
#define HID_USAGE_SENSOR_ORIENT_MAGN_HEADING_X 0x200472
#define HID_USAGE_SENSOR_ORIENT_MAGN_HEADING_Y 0x200473
#define HID_USAGE_SENSOR_ORIENT_MAGN_HEADING_Z 0x200474
#define HID_USAGE_SENSOR_ORIENT_COMP_MAGN_NORTH 0x200475
#define HID_USAGE_SENSOR_ORIENT_COMP_TRUE_NORTH 0x200476
#define HID_USAGE_SENSOR_ORIENT_MAGN_NORTH 0x200477
#define HID_USAGE_SENSOR_ORIENT_TRUE_NORTH 0x200478
#define HID_USAGE_SENSOR_ORIENT_DISTANCE 0x200479
#define HID_USAGE_SENSOR_ORIENT_DISTANCE_X 0x20047A
#define HID_USAGE_SENSOR_ORIENT_DISTANCE_Y 0x20047B
#define HID_USAGE_SENSOR_ORIENT_DISTANCE_Z 0x20047C
#define HID_USAGE_SENSOR_ORIENT_DISTANCE_OUT_OF_RANGE 0x20047D
iio: hid-sensors: Added Inclinometer 3D Added usage id processing for Inclinometer 3D. This uses IIO interfaces for triggered buffer to present data to user mode.This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-06 08:11:00 +08:00
/* ORIENTATION: Inclinometer 3D: (200086) */
#define HID_USAGE_SENSOR_INCLINOMETER_3D 0x200086
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
#define HID_USAGE_SENSOR_ORIENT_TILT 0x20047E
#define HID_USAGE_SENSOR_ORIENT_TILT_X 0x20047F
#define HID_USAGE_SENSOR_ORIENT_TILT_Y 0x200480
#define HID_USAGE_SENSOR_ORIENT_TILT_Z 0x200481
iio: hid-sensors: Added Inclinometer 3D Added usage id processing for Inclinometer 3D. This uses IIO interfaces for triggered buffer to present data to user mode.This uses HID sensor framework for registering callback events from the sensor hub. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-06 08:11:00 +08:00
iio: hid-sensors: Added device rotation support Added usage id processing for device rotation. This uses IIO interfaces for triggered buffer to present data to user mode.This uses HID sensor framework for registering callback events from the sensor hub. Data is exported to user space in the form of quaternion rotation format. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-29 07:51:00 +08:00
#define HID_USAGE_SENSOR_DEVICE_ORIENTATION 0x20008A
iio: hid-sensor-rotation: Add relative orientation sensor hid support Relative orientation(AG) sensor is a 6dof orientation sensor, it depends on acceleration and gyroscope sensor data. It gives a quaternion describing the orientation of the device relative to an initial orientation. It is a standard HID sensor. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf Relative orientation(AG) sensor and dev rotation sensor have same channels and share channel usage id. So the most of the code for relative orientation sensor can be reused. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com> Reviewed-by: Xu Even <even.xu@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 18:24:24 +08:00
#define HID_USAGE_SENSOR_RELATIVE_ORIENTATION 0x20008E
iio: hid-sensor-rotation: Add geomagnetic orientation sensor hid support. Geomagnetic orientation(AM) sensor is one kind of orientation 6dof sensor. It gives the device rotation in respect to the earth center and the magnetic north. The sensor is implemented through use of an accelerometer and magnetometer do not use gyroscope. It is a standard HID sensor. More information can be found in: http://www.usb.org/developers/hidpage/HUTRR59_-_Usages_for_Wearables.pdf Geomagnetic orientation(AM) sensor and dev rotation sensor have same channel and share channel usage id. So the most of the code for relative orientation sensor can be reused. Signed-off-by: Song Hongyan <hongyan.song@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-05-07 18:24:25 +08:00
#define HID_USAGE_SENSOR_GEOMAGNETIC_ORIENTATION 0x2000C1
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
#define HID_USAGE_SENSOR_ORIENT_ROTATION_MATRIX 0x200482
#define HID_USAGE_SENSOR_ORIENT_QUATERNION 0x200483
#define HID_USAGE_SENSOR_ORIENT_MAGN_FLUX 0x200484
#define HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_X_AXIS 0x200485
#define HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Y_AXIS 0x200486
#define HID_USAGE_SENSOR_ORIENT_MAGN_FLUX_Z_AXIS 0x200487
iio: Add Usage IDs for HID time sensors. These are Usage IDs for the attributes year, month, day, hour, minute and second, needed to read HID time sensors. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-12-15 20:45:00 +08:00
/* Time (2000a0) */
#define HID_USAGE_SENSOR_TIME 0x2000a0
#define HID_USAGE_SENSOR_TIME_YEAR 0x200521
#define HID_USAGE_SENSOR_TIME_MONTH 0x200522
#define HID_USAGE_SENSOR_TIME_DAY 0x200523
#define HID_USAGE_SENSOR_TIME_HOUR 0x200525
#define HID_USAGE_SENSOR_TIME_MINUTE 0x200526
#define HID_USAGE_SENSOR_TIME_SECOND 0x200527
iio: accel: hid-sensor-accel-3d: Add timestamp Added timestamp channel. With this change, each sample has a timestamp. This timestamp can be from the sensor hub when present or local kernel timestamp. HID sensors can send timestamp with input data using usage id HID_USAGE_SENSOR_TIME_TIMESTAMP. This timestamp value is converted to nano seconds before pushing this sample to the iio core. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-11-29 06:41:16 +08:00
#define HID_USAGE_SENSOR_TIME_TIMESTAMP 0x200529
iio: Add Usage IDs for HID time sensors. These are Usage IDs for the attributes year, month, day, hour, minute and second, needed to read HID time sensors. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-12-15 20:45:00 +08:00
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
/* Units */
#define HID_USAGE_SENSOR_UNITS_NOT_SPECIFIED 0x00
#define HID_USAGE_SENSOR_UNITS_LUX 0x01
#define HID_USAGE_SENSOR_UNITS_KELVIN 0x01000100
#define HID_USAGE_SENSOR_UNITS_FAHRENHEIT 0x03000100
#define HID_USAGE_SENSOR_UNITS_PASCAL 0xF1E1
#define HID_USAGE_SENSOR_UNITS_NEWTON 0x11E1
#define HID_USAGE_SENSOR_UNITS_METERS_PER_SECOND 0x11F0
#define HID_USAGE_SENSOR_UNITS_METERS_PER_SEC_SQRD 0x11E0
#define HID_USAGE_SENSOR_UNITS_FARAD 0xE14F2000
#define HID_USAGE_SENSOR_UNITS_AMPERE 0x01001000
#define HID_USAGE_SENSOR_UNITS_WATT 0x21d1
#define HID_USAGE_SENSOR_UNITS_HENRY 0x21E1E000
#define HID_USAGE_SENSOR_UNITS_OHM 0x21D1E000
#define HID_USAGE_SENSOR_UNITS_VOLT 0x21D1F000
#define HID_USAGE_SENSOR_UNITS_HERTZ 0x01F0
#define HID_USAGE_SENSOR_UNITS_DEGREES_PER_SEC_SQRD 0x14E0
#define HID_USAGE_SENSOR_UNITS_RADIANS 0x12
#define HID_USAGE_SENSOR_UNITS_RADIANS_PER_SECOND 0x12F0
#define HID_USAGE_SENSOR_UNITS_RADIANS_PER_SEC_SQRD 0x12E0
#define HID_USAGE_SENSOR_UNITS_SECOND 0x0110
#define HID_USAGE_SENSOR_UNITS_GAUSS 0x01E1F000
#define HID_USAGE_SENSOR_UNITS_GRAM 0x0101
#define HID_USAGE_SENSOR_UNITS_CENTIMETER 0x11
#define HID_USAGE_SENSOR_UNITS_G 0x1A
#define HID_USAGE_SENSOR_UNITS_MILLISECOND 0x19
#define HID_USAGE_SENSOR_UNITS_PERCENT 0x17
#define HID_USAGE_SENSOR_UNITS_DEGREES 0x14
#define HID_USAGE_SENSOR_UNITS_DEGREES_PER_SECOND 0x15
/* Common selectors */
HID: hid-sensor-custom: Add custom sensor iio support Currently custom sensors properties are not decoded and it is up to user space to interpret. Some manufacturers already standardized the meaning of some custom sensors. They can be presented as a proper IIO sensor. We can identify these sensors based on manufacturer and serial number property in the report. This change is identifying hinge sensor when the manufacturer is "INTEL". This creates a platform device so that a sensor driver can be loaded to process these sensors. Signed-off-by: Ye Xiang <xiang.ye@intel.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/r/20201215054444.9324-2-xiang.ye@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-15 13:44:42 +08:00
#define HID_USAGE_SENSOR_PROP_DESC 0x200300
#define HID_USAGE_SENSOR_PROP_FRIENDLY_NAME 0x200301
#define HID_USAGE_SENSOR_PROP_SERIAL_NUM 0x200307
#define HID_USAGE_SENSOR_PROP_MANUFACTURER 0x200305
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
#define HID_USAGE_SENSOR_PROP_REPORT_INTERVAL 0x20030E
#define HID_USAGE_SENSOR_PROP_SENSITIVITY_ABS 0x20030F
#define HID_USAGE_SENSOR_PROP_SENSITIVITY_RANGE_PCT 0x200310
#define HID_USAGE_SENSOR_PROP_SENSITIVITY_REL_PCT 0x200311
#define HID_USAGE_SENSOR_PROP_ACCURACY 0x200312
#define HID_USAGE_SENSOR_PROP_RESOLUTION 0x200313
#define HID_USAGE_SENSOR_PROP_RANGE_MAXIMUM 0x200314
#define HID_USAGE_SENSOR_PROP_RANGE_MINIMUM 0x200315
#define HID_USAGE_SENSOR_PROP_REPORT_STATE 0x200316
#define HID_USAGE_SENSOR_PROY_POWER_STATE 0x200319
iio: hid-sensor-hub: Implement batch mode HID sensor hubs using Integrated Senor Hub (ISH) has added capability to support batch mode. This allows host processor to go to sleep for extended duration, while the sensor hub is storing samples in its internal buffers. 'Commit f4f4673b7535 ("iio: add support for hardware fifo")' implements feature in IIO core to implement such feature. This feature is used in bmc150-accel-core.c to implement batch mode. This implementation allows software device buffer watermark to be used as a hint to adjust hardware FIFO. But HID sensor hubs don't allow to change internal buffer size of FIFOs. Instead an additional usage id to set "maximum report latency" is defined. This allows host to go to sleep upto this latency period without getting any report. Since there is no ABI to set this latency, a new attribute "hwfifo_timeout" is added so that user mode can specify a latency. This change checks presence of usage id to get/set maximum report latency and if present, it will expose hwfifo_timeout. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-08 10:22:06 +08:00
/* Batch mode selectors */
#define HID_USAGE_SENSOR_PROP_REPORT_LATENCY 0x20031B
iio: hid-sensors: accelerometer: Add sensitivity A number of Properties that can be applied to Data Fields are per data field basis or for all data fields. Adding sensitivity field for all accelerometer fields, which is most commonly used in currently available sensor hubs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-31 06:48:00 +08:00
/* Per data field properties */
#define HID_USAGE_SENSOR_DATA_MOD_NONE 0x00
#define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS 0x1000
iio: Add relative sensitivity support Some hid sensors may use relative sensitivity such as als sensor. This patch adds relative sensitivity checking for all hid sensors. Signed-off-by: Ye Xiang <xiang.ye@intel.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/r/20210207070048.23935-2-xiang.ye@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-02-07 15:00:46 +08:00
#define HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_REL_PCT 0xE000
iio: hid-sensors: accelerometer: Add sensitivity A number of Properties that can be applied to Data Fields are per data field basis or for all data fields. Adding sensitivity field for all accelerometer fields, which is most commonly used in currently available sensor hubs. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-31 06:48:00 +08:00
iio: hid-sensors: Fix power and report state In the original HID sensor hub firmwares all Named array enums were to 0-based. But the most recent hub implemented as 1-based, because of the implementation by one of the major OS vendor. Using logical minimum for the field as the base of enum. So we add logical minimum to the selector values before setting those fields. Some sensor hub FWs already changed logical minimum from 0 to 1 to reflect this and hope every other vendor will follow. There is no easy way to add a common HID quirk for NAry elements, even if the standard specifies these field as NAry, the collection used to describe selectors is still just "logical". Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-28 06:19:00 +08:00
/* Power state enumerations */
iio: hid-sensor-hub: Remove hard coded indexes Remove the hard coded indexes, instead search for usage id and use the index to set the power and report state. This will fix issue, where the report descriptor doesn't contain the full list of possible selector for power and report state. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-24 10:50:22 +08:00
#define HID_USAGE_SENSOR_PROP_POWER_STATE_UNDEFINED_ENUM 0x200850
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D0_FULL_POWER_ENUM 0x200851
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D1_LOW_POWER_ENUM 0x200852
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D2_STANDBY_WITH_WAKE_ENUM 0x200853
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D3_SLEEP_WITH_WAKE_ENUM 0x200854
#define HID_USAGE_SENSOR_PROP_POWER_STATE_D4_POWER_OFF_ENUM 0x200855
iio: hid-sensors: Fix power and report state In the original HID sensor hub firmwares all Named array enums were to 0-based. But the most recent hub implemented as 1-based, because of the implementation by one of the major OS vendor. Using logical minimum for the field as the base of enum. So we add logical minimum to the selector values before setting those fields. Some sensor hub FWs already changed logical minimum from 0 to 1 to reflect this and hope every other vendor will follow. There is no easy way to add a common HID quirk for NAry elements, even if the standard specifies these field as NAry, the collection used to describe selectors is still just "logical". Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-28 06:19:00 +08:00
/* Report State enumerations */
iio: hid-sensor-hub: Remove hard coded indexes Remove the hard coded indexes, instead search for usage id and use the index to set the power and report state. This will fix issue, where the report descriptor doesn't contain the full list of possible selector for power and report state. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-01-24 10:50:22 +08:00
#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_NO_EVENTS_ENUM 0x200840
#define HID_USAGE_SENSOR_PROP_REPORTING_STATE_ALL_EVENTS_ENUM 0x200841
iio: hid-sensors: Fix power and report state In the original HID sensor hub firmwares all Named array enums were to 0-based. But the most recent hub implemented as 1-based, because of the implementation by one of the major OS vendor. Using logical minimum for the field as the base of enum. So we add logical minimum to the selector values before setting those fields. Some sensor hub FWs already changed logical minimum from 0 to 1 to reflect this and hope every other vendor will follow. There is no easy way to add a common HID quirk for NAry elements, even if the standard specifies these field as NAry, the collection used to describe selectors is still just "logical". Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-11-28 06:19:00 +08:00
HID: hid-sensor-custom: Add custom sensor iio support Currently custom sensors properties are not decoded and it is up to user space to interpret. Some manufacturers already standardized the meaning of some custom sensors. They can be presented as a proper IIO sensor. We can identify these sensors based on manufacturer and serial number property in the report. This change is identifying hinge sensor when the manufacturer is "INTEL". This creates a platform device so that a sensor driver can be loaded to process these sensors. Signed-off-by: Ye Xiang <xiang.ye@intel.com> Acked-by: Jiri Kosina <jkosina@suse.cz> Link: https://lore.kernel.org/r/20201215054444.9324-2-xiang.ye@intel.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-12-15 13:44:42 +08:00
/* Custom Sensor (2000e1) */
#define HID_USAGE_SENSOR_HINGE 0x20020B
#define HID_USAGE_SENSOR_DATA_FIELD_LOCATION 0x200400
#define HID_USAGE_SENSOR_DATA_FIELE_TIME_SINCE_SYS_BOOT 0x20052B
#define HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_USAGE 0x200541
#define HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE_BASE 0x200543
/* Custom Sensor data 28=>x>=0 */
#define HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE(x) \
(HID_USAGE_SENSOR_DATA_FIELD_CUSTOM_VALUE_BASE + (x))
HID: sensors: introduce sensor framework Adding processing for HID Sensor usage table as defined by HID 1.12, Request #: HUTRR39, dated 05 May, 2011. This driver uses HID driver framework to register, send and receive events. This uses MFD framework, so that actual processing for a specific usage id can be done in a different driver. For example an accelerometer driver can be a separate driver and use the interface provided by this driver to register for events. Signed-off-by: srinivas pandruvada <srinivas.pandruvada@intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2012-09-05 20:56:00 +08:00
#endif