OpenCloudOS-Kernel/block/mq-deadline.c

1248 lines
34 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* MQ Deadline i/o scheduler - adaptation of the legacy deadline scheduler,
* for the blk-mq scheduling framework
*
* Copyright (C) 2016 Jens Axboe <axboe@kernel.dk>
*/
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/blkdev.h>
#include <linux/blk-mq.h>
#include <linux/bio.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/compiler.h>
#include <linux/rbtree.h>
#include <linux/sbitmap.h>
#include <trace/events/block.h>
#include "elevator.h"
#include "blk.h"
#include "blk-mq.h"
#include "blk-mq-debugfs.h"
#include "blk-mq-tag.h"
#include "blk-mq-sched.h"
/*
* See Documentation/block/deadline-iosched.rst
*/
static const int read_expire = HZ / 2; /* max time before a read is submitted. */
static const int write_expire = 5 * HZ; /* ditto for writes, these limits are SOFT! */
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
/*
* Time after which to dispatch lower priority requests even if higher
* priority requests are pending.
*/
static const int prio_aging_expire = 10 * HZ;
static const int writes_starved = 2; /* max times reads can starve a write */
static const int fifo_batch = 16; /* # of sequential requests treated as one
by the above parameters. For throughput. */
enum dd_data_dir {
DD_READ = READ,
DD_WRITE = WRITE,
};
enum { DD_DIR_COUNT = 2 };
enum dd_prio {
DD_RT_PRIO = 0,
DD_BE_PRIO = 1,
DD_IDLE_PRIO = 2,
DD_PRIO_MAX = 2,
};
enum { DD_PRIO_COUNT = 3 };
/*
* I/O statistics per I/O priority. It is fine if these counters overflow.
* What matters is that these counters are at least as wide as
* log2(max_outstanding_requests).
*/
struct io_stats_per_prio {
uint32_t inserted;
uint32_t merged;
uint32_t dispatched;
atomic_t completed;
};
/*
* Deadline scheduler data per I/O priority (enum dd_prio). Requests are
* present on both sort_list[] and fifo_list[].
*/
struct dd_per_prio {
struct list_head dispatch;
struct rb_root sort_list[DD_DIR_COUNT];
struct list_head fifo_list[DD_DIR_COUNT];
/* Next request in FIFO order. Read, write or both are NULL. */
struct request *next_rq[DD_DIR_COUNT];
struct io_stats_per_prio stats;
};
struct deadline_data {
/*
* run time data
*/
struct dd_per_prio per_prio[DD_PRIO_COUNT];
/* Data direction of latest dispatched request. */
enum dd_data_dir last_dir;
unsigned int batching; /* number of sequential requests made */
unsigned int starved; /* times reads have starved writes */
/*
* settings that change how the i/o scheduler behaves
*/
int fifo_expire[DD_DIR_COUNT];
int fifo_batch;
int writes_starved;
int front_merges;
u32 async_depth;
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
int prio_aging_expire;
spinlock_t lock;
spinlock_t zone_lock;
};
/* Maps an I/O priority class to a deadline scheduler priority. */
static const enum dd_prio ioprio_class_to_prio[] = {
[IOPRIO_CLASS_NONE] = DD_BE_PRIO,
[IOPRIO_CLASS_RT] = DD_RT_PRIO,
[IOPRIO_CLASS_BE] = DD_BE_PRIO,
[IOPRIO_CLASS_IDLE] = DD_IDLE_PRIO,
};
static inline struct rb_root *
deadline_rb_root(struct dd_per_prio *per_prio, struct request *rq)
{
return &per_prio->sort_list[rq_data_dir(rq)];
}
/*
* Returns the I/O priority class (IOPRIO_CLASS_*) that has been assigned to a
* request.
*/
static u8 dd_rq_ioclass(struct request *rq)
{
return IOPRIO_PRIO_CLASS(req_get_ioprio(rq));
}
block: mq-deadline: Do not break sequential write streams to zoned HDDs mq-deadline ensures an in order dispatching of write requests to zoned block devices using a per zone lock (a bit). This implies that for any purely sequential write workload, the drive is exercised most of the time at a maximum queue depth of one. However, when such sequential write workload crosses a zone boundary (when sequentially writing multiple contiguous zones), zone write locking may prevent the last write to one zone to be issued (as the previous write is still being executed) but allow the first write to the following zone to be issued (as that zone is not yet being writen and not locked). This result in an out of order delivery of the sequential write commands to the device every time a zone boundary is crossed. While such behavior does not break the sequential write constraint of zoned block devices (and does not generate any write error), some zoned hard-disks react badly to seeing these out of order writes, resulting in lower write throughput. This problem can be addressed by always dispatching the first request of a stream of sequential write requests, regardless of the zones targeted by these sequential writes. To do so, the function deadline_skip_seq_writes() is introduced and used in deadline_next_request() to select the next write command to issue if the target device is an HDD (blk_queue_nonrot() being false). deadline_fifo_request() is modified using the new deadline_earlier_request() and deadline_is_seq_write() helpers to ignore requests in the fifo list that have a preceding request in lba order that is sequential. With this fix, a sequential write workload executed with the following fio command: fio --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \ --size=68719476736 --ioengine=libaio --iodepth=32 --rw=write \ --bs=65536 results in an increase from 225 MB/s to 250 MB/s of the write throughput of an SMR HDD (11% increase). Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-24 10:12:08 +08:00
/*
* get the request before `rq' in sector-sorted order
*/
static inline struct request *
deadline_earlier_request(struct request *rq)
{
struct rb_node *node = rb_prev(&rq->rb_node);
if (node)
return rb_entry_rq(node);
return NULL;
}
/*
* get the request after `rq' in sector-sorted order
*/
static inline struct request *
deadline_latter_request(struct request *rq)
{
struct rb_node *node = rb_next(&rq->rb_node);
if (node)
return rb_entry_rq(node);
return NULL;
}
static void
deadline_add_rq_rb(struct dd_per_prio *per_prio, struct request *rq)
{
struct rb_root *root = deadline_rb_root(per_prio, rq);
elv_rb_add(root, rq);
}
static inline void
deadline_del_rq_rb(struct dd_per_prio *per_prio, struct request *rq)
{
const enum dd_data_dir data_dir = rq_data_dir(rq);
if (per_prio->next_rq[data_dir] == rq)
per_prio->next_rq[data_dir] = deadline_latter_request(rq);
elv_rb_del(deadline_rb_root(per_prio, rq), rq);
}
/*
* remove rq from rbtree and fifo.
*/
static void deadline_remove_request(struct request_queue *q,
struct dd_per_prio *per_prio,
struct request *rq)
{
list_del_init(&rq->queuelist);
/*
* We might not be on the rbtree, if we are doing an insert merge
*/
if (!RB_EMPTY_NODE(&rq->rb_node))
deadline_del_rq_rb(per_prio, rq);
elv_rqhash_del(q, rq);
if (q->last_merge == rq)
q->last_merge = NULL;
}
static void dd_request_merged(struct request_queue *q, struct request *req,
enum elv_merge type)
{
struct deadline_data *dd = q->elevator->elevator_data;
const u8 ioprio_class = dd_rq_ioclass(req);
const enum dd_prio prio = ioprio_class_to_prio[ioprio_class];
struct dd_per_prio *per_prio = &dd->per_prio[prio];
/*
* if the merge was a front merge, we need to reposition request
*/
if (type == ELEVATOR_FRONT_MERGE) {
elv_rb_del(deadline_rb_root(per_prio, req), req);
deadline_add_rq_rb(per_prio, req);
}
}
/*
* Callback function that is invoked after @next has been merged into @req.
*/
static void dd_merged_requests(struct request_queue *q, struct request *req,
struct request *next)
{
struct deadline_data *dd = q->elevator->elevator_data;
const u8 ioprio_class = dd_rq_ioclass(next);
const enum dd_prio prio = ioprio_class_to_prio[ioprio_class];
lockdep_assert_held(&dd->lock);
dd->per_prio[prio].stats.merged++;
/*
* if next expires before rq, assign its expire time to rq
* and move into next position (next will be deleted) in fifo
*/
if (!list_empty(&req->queuelist) && !list_empty(&next->queuelist)) {
if (time_before((unsigned long)next->fifo_time,
(unsigned long)req->fifo_time)) {
list_move(&req->queuelist, &next->queuelist);
req->fifo_time = next->fifo_time;
}
}
/*
* kill knowledge of next, this one is a goner
*/
deadline_remove_request(q, &dd->per_prio[prio], next);
}
/*
* move an entry to dispatch queue
*/
static void
deadline_move_request(struct deadline_data *dd, struct dd_per_prio *per_prio,
struct request *rq)
{
const enum dd_data_dir data_dir = rq_data_dir(rq);
per_prio->next_rq[data_dir] = deadline_latter_request(rq);
/*
* take it off the sort and fifo list
*/
deadline_remove_request(rq->q, per_prio, rq);
}
/* Number of requests queued for a given priority level. */
static u32 dd_queued(struct deadline_data *dd, enum dd_prio prio)
{
const struct io_stats_per_prio *stats = &dd->per_prio[prio].stats;
lockdep_assert_held(&dd->lock);
return stats->inserted - atomic_read(&stats->completed);
}
/*
* deadline_check_fifo returns 0 if there are no expired requests on the fifo,
* 1 otherwise. Requires !list_empty(&dd->fifo_list[data_dir])
*/
static inline int deadline_check_fifo(struct dd_per_prio *per_prio,
enum dd_data_dir data_dir)
{
struct request *rq = rq_entry_fifo(per_prio->fifo_list[data_dir].next);
/*
* rq is expired!
*/
if (time_after_eq(jiffies, (unsigned long)rq->fifo_time))
return 1;
return 0;
}
block: mq-deadline: Do not break sequential write streams to zoned HDDs mq-deadline ensures an in order dispatching of write requests to zoned block devices using a per zone lock (a bit). This implies that for any purely sequential write workload, the drive is exercised most of the time at a maximum queue depth of one. However, when such sequential write workload crosses a zone boundary (when sequentially writing multiple contiguous zones), zone write locking may prevent the last write to one zone to be issued (as the previous write is still being executed) but allow the first write to the following zone to be issued (as that zone is not yet being writen and not locked). This result in an out of order delivery of the sequential write commands to the device every time a zone boundary is crossed. While such behavior does not break the sequential write constraint of zoned block devices (and does not generate any write error), some zoned hard-disks react badly to seeing these out of order writes, resulting in lower write throughput. This problem can be addressed by always dispatching the first request of a stream of sequential write requests, regardless of the zones targeted by these sequential writes. To do so, the function deadline_skip_seq_writes() is introduced and used in deadline_next_request() to select the next write command to issue if the target device is an HDD (blk_queue_nonrot() being false). deadline_fifo_request() is modified using the new deadline_earlier_request() and deadline_is_seq_write() helpers to ignore requests in the fifo list that have a preceding request in lba order that is sequential. With this fix, a sequential write workload executed with the following fio command: fio --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \ --size=68719476736 --ioengine=libaio --iodepth=32 --rw=write \ --bs=65536 results in an increase from 225 MB/s to 250 MB/s of the write throughput of an SMR HDD (11% increase). Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-24 10:12:08 +08:00
/*
* Check if rq has a sequential request preceding it.
*/
static bool deadline_is_seq_write(struct deadline_data *dd, struct request *rq)
block: mq-deadline: Do not break sequential write streams to zoned HDDs mq-deadline ensures an in order dispatching of write requests to zoned block devices using a per zone lock (a bit). This implies that for any purely sequential write workload, the drive is exercised most of the time at a maximum queue depth of one. However, when such sequential write workload crosses a zone boundary (when sequentially writing multiple contiguous zones), zone write locking may prevent the last write to one zone to be issued (as the previous write is still being executed) but allow the first write to the following zone to be issued (as that zone is not yet being writen and not locked). This result in an out of order delivery of the sequential write commands to the device every time a zone boundary is crossed. While such behavior does not break the sequential write constraint of zoned block devices (and does not generate any write error), some zoned hard-disks react badly to seeing these out of order writes, resulting in lower write throughput. This problem can be addressed by always dispatching the first request of a stream of sequential write requests, regardless of the zones targeted by these sequential writes. To do so, the function deadline_skip_seq_writes() is introduced and used in deadline_next_request() to select the next write command to issue if the target device is an HDD (blk_queue_nonrot() being false). deadline_fifo_request() is modified using the new deadline_earlier_request() and deadline_is_seq_write() helpers to ignore requests in the fifo list that have a preceding request in lba order that is sequential. With this fix, a sequential write workload executed with the following fio command: fio --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \ --size=68719476736 --ioengine=libaio --iodepth=32 --rw=write \ --bs=65536 results in an increase from 225 MB/s to 250 MB/s of the write throughput of an SMR HDD (11% increase). Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-24 10:12:08 +08:00
{
struct request *prev = deadline_earlier_request(rq);
if (!prev)
return false;
return blk_rq_pos(prev) + blk_rq_sectors(prev) == blk_rq_pos(rq);
}
/*
* Skip all write requests that are sequential from @rq, even if we cross
* a zone boundary.
*/
static struct request *deadline_skip_seq_writes(struct deadline_data *dd,
struct request *rq)
{
sector_t pos = blk_rq_pos(rq);
sector_t skipped_sectors = 0;
while (rq) {
if (blk_rq_pos(rq) != pos + skipped_sectors)
break;
skipped_sectors += blk_rq_sectors(rq);
rq = deadline_latter_request(rq);
}
return rq;
}
/*
* For the specified data direction, return the next request to
* dispatch using arrival ordered lists.
*/
static struct request *
deadline_fifo_request(struct deadline_data *dd, struct dd_per_prio *per_prio,
enum dd_data_dir data_dir)
{
struct request *rq;
unsigned long flags;
if (list_empty(&per_prio->fifo_list[data_dir]))
return NULL;
rq = rq_entry_fifo(per_prio->fifo_list[data_dir].next);
if (data_dir == DD_READ || !blk_queue_is_zoned(rq->q))
return rq;
/*
* Look for a write request that can be dispatched, that is one with
block: mq-deadline: Do not break sequential write streams to zoned HDDs mq-deadline ensures an in order dispatching of write requests to zoned block devices using a per zone lock (a bit). This implies that for any purely sequential write workload, the drive is exercised most of the time at a maximum queue depth of one. However, when such sequential write workload crosses a zone boundary (when sequentially writing multiple contiguous zones), zone write locking may prevent the last write to one zone to be issued (as the previous write is still being executed) but allow the first write to the following zone to be issued (as that zone is not yet being writen and not locked). This result in an out of order delivery of the sequential write commands to the device every time a zone boundary is crossed. While such behavior does not break the sequential write constraint of zoned block devices (and does not generate any write error), some zoned hard-disks react badly to seeing these out of order writes, resulting in lower write throughput. This problem can be addressed by always dispatching the first request of a stream of sequential write requests, regardless of the zones targeted by these sequential writes. To do so, the function deadline_skip_seq_writes() is introduced and used in deadline_next_request() to select the next write command to issue if the target device is an HDD (blk_queue_nonrot() being false). deadline_fifo_request() is modified using the new deadline_earlier_request() and deadline_is_seq_write() helpers to ignore requests in the fifo list that have a preceding request in lba order that is sequential. With this fix, a sequential write workload executed with the following fio command: fio --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \ --size=68719476736 --ioengine=libaio --iodepth=32 --rw=write \ --bs=65536 results in an increase from 225 MB/s to 250 MB/s of the write throughput of an SMR HDD (11% increase). Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-24 10:12:08 +08:00
* an unlocked target zone. For some HDDs, breaking a sequential
* write stream can lead to lower throughput, so make sure to preserve
* sequential write streams, even if that stream crosses into the next
* zones and these zones are unlocked.
*/
spin_lock_irqsave(&dd->zone_lock, flags);
list_for_each_entry(rq, &per_prio->fifo_list[DD_WRITE], queuelist) {
block: mq-deadline: Do not break sequential write streams to zoned HDDs mq-deadline ensures an in order dispatching of write requests to zoned block devices using a per zone lock (a bit). This implies that for any purely sequential write workload, the drive is exercised most of the time at a maximum queue depth of one. However, when such sequential write workload crosses a zone boundary (when sequentially writing multiple contiguous zones), zone write locking may prevent the last write to one zone to be issued (as the previous write is still being executed) but allow the first write to the following zone to be issued (as that zone is not yet being writen and not locked). This result in an out of order delivery of the sequential write commands to the device every time a zone boundary is crossed. While such behavior does not break the sequential write constraint of zoned block devices (and does not generate any write error), some zoned hard-disks react badly to seeing these out of order writes, resulting in lower write throughput. This problem can be addressed by always dispatching the first request of a stream of sequential write requests, regardless of the zones targeted by these sequential writes. To do so, the function deadline_skip_seq_writes() is introduced and used in deadline_next_request() to select the next write command to issue if the target device is an HDD (blk_queue_nonrot() being false). deadline_fifo_request() is modified using the new deadline_earlier_request() and deadline_is_seq_write() helpers to ignore requests in the fifo list that have a preceding request in lba order that is sequential. With this fix, a sequential write workload executed with the following fio command: fio --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \ --size=68719476736 --ioengine=libaio --iodepth=32 --rw=write \ --bs=65536 results in an increase from 225 MB/s to 250 MB/s of the write throughput of an SMR HDD (11% increase). Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-24 10:12:08 +08:00
if (blk_req_can_dispatch_to_zone(rq) &&
(blk_queue_nonrot(rq->q) ||
!deadline_is_seq_write(dd, rq)))
goto out;
}
rq = NULL;
out:
spin_unlock_irqrestore(&dd->zone_lock, flags);
return rq;
}
/*
* For the specified data direction, return the next request to
* dispatch using sector position sorted lists.
*/
static struct request *
deadline_next_request(struct deadline_data *dd, struct dd_per_prio *per_prio,
enum dd_data_dir data_dir)
{
struct request *rq;
unsigned long flags;
rq = per_prio->next_rq[data_dir];
if (!rq)
return NULL;
if (data_dir == DD_READ || !blk_queue_is_zoned(rq->q))
return rq;
/*
* Look for a write request that can be dispatched, that is one with
block: mq-deadline: Do not break sequential write streams to zoned HDDs mq-deadline ensures an in order dispatching of write requests to zoned block devices using a per zone lock (a bit). This implies that for any purely sequential write workload, the drive is exercised most of the time at a maximum queue depth of one. However, when such sequential write workload crosses a zone boundary (when sequentially writing multiple contiguous zones), zone write locking may prevent the last write to one zone to be issued (as the previous write is still being executed) but allow the first write to the following zone to be issued (as that zone is not yet being writen and not locked). This result in an out of order delivery of the sequential write commands to the device every time a zone boundary is crossed. While such behavior does not break the sequential write constraint of zoned block devices (and does not generate any write error), some zoned hard-disks react badly to seeing these out of order writes, resulting in lower write throughput. This problem can be addressed by always dispatching the first request of a stream of sequential write requests, regardless of the zones targeted by these sequential writes. To do so, the function deadline_skip_seq_writes() is introduced and used in deadline_next_request() to select the next write command to issue if the target device is an HDD (blk_queue_nonrot() being false). deadline_fifo_request() is modified using the new deadline_earlier_request() and deadline_is_seq_write() helpers to ignore requests in the fifo list that have a preceding request in lba order that is sequential. With this fix, a sequential write workload executed with the following fio command: fio --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \ --size=68719476736 --ioengine=libaio --iodepth=32 --rw=write \ --bs=65536 results in an increase from 225 MB/s to 250 MB/s of the write throughput of an SMR HDD (11% increase). Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-24 10:12:08 +08:00
* an unlocked target zone. For some HDDs, breaking a sequential
* write stream can lead to lower throughput, so make sure to preserve
* sequential write streams, even if that stream crosses into the next
* zones and these zones are unlocked.
*/
spin_lock_irqsave(&dd->zone_lock, flags);
while (rq) {
if (blk_req_can_dispatch_to_zone(rq))
break;
block: mq-deadline: Do not break sequential write streams to zoned HDDs mq-deadline ensures an in order dispatching of write requests to zoned block devices using a per zone lock (a bit). This implies that for any purely sequential write workload, the drive is exercised most of the time at a maximum queue depth of one. However, when such sequential write workload crosses a zone boundary (when sequentially writing multiple contiguous zones), zone write locking may prevent the last write to one zone to be issued (as the previous write is still being executed) but allow the first write to the following zone to be issued (as that zone is not yet being writen and not locked). This result in an out of order delivery of the sequential write commands to the device every time a zone boundary is crossed. While such behavior does not break the sequential write constraint of zoned block devices (and does not generate any write error), some zoned hard-disks react badly to seeing these out of order writes, resulting in lower write throughput. This problem can be addressed by always dispatching the first request of a stream of sequential write requests, regardless of the zones targeted by these sequential writes. To do so, the function deadline_skip_seq_writes() is introduced and used in deadline_next_request() to select the next write command to issue if the target device is an HDD (blk_queue_nonrot() being false). deadline_fifo_request() is modified using the new deadline_earlier_request() and deadline_is_seq_write() helpers to ignore requests in the fifo list that have a preceding request in lba order that is sequential. With this fix, a sequential write workload executed with the following fio command: fio --name=seq-write --filename=/dev/sda --zonemode=zbd --direct=1 \ --size=68719476736 --ioengine=libaio --iodepth=32 --rw=write \ --bs=65536 results in an increase from 225 MB/s to 250 MB/s of the write throughput of an SMR HDD (11% increase). Cc: <stable@vger.kernel.org> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20221124021208.242541-3-damien.lemoal@opensource.wdc.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-11-24 10:12:08 +08:00
if (blk_queue_nonrot(rq->q))
rq = deadline_latter_request(rq);
else
rq = deadline_skip_seq_writes(dd, rq);
}
spin_unlock_irqrestore(&dd->zone_lock, flags);
return rq;
}
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
/*
* Returns true if and only if @rq started after @latest_start where
* @latest_start is in jiffies.
*/
static bool started_after(struct deadline_data *dd, struct request *rq,
unsigned long latest_start)
{
unsigned long start_time = (unsigned long)rq->fifo_time;
start_time -= dd->fifo_expire[rq_data_dir(rq)];
return time_after(start_time, latest_start);
}
/*
* deadline_dispatch_requests selects the best request according to
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
* read/write expire, fifo_batch, etc and with a start time <= @latest_start.
*/
static struct request *__dd_dispatch_request(struct deadline_data *dd,
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
struct dd_per_prio *per_prio,
unsigned long latest_start)
{
struct request *rq, *next_rq;
enum dd_data_dir data_dir;
enum dd_prio prio;
u8 ioprio_class;
lockdep_assert_held(&dd->lock);
if (!list_empty(&per_prio->dispatch)) {
rq = list_first_entry(&per_prio->dispatch, struct request,
queuelist);
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
if (started_after(dd, rq, latest_start))
return NULL;
list_del_init(&rq->queuelist);
goto done;
}
/*
* batches are currently reads XOR writes
*/
rq = deadline_next_request(dd, per_prio, dd->last_dir);
if (rq && dd->batching < dd->fifo_batch)
/* we have a next request are still entitled to batch */
goto dispatch_request;
/*
* at this point we are not running a batch. select the appropriate
* data direction (read / write)
*/
if (!list_empty(&per_prio->fifo_list[DD_READ])) {
BUG_ON(RB_EMPTY_ROOT(&per_prio->sort_list[DD_READ]));
if (deadline_fifo_request(dd, per_prio, DD_WRITE) &&
(dd->starved++ >= dd->writes_starved))
goto dispatch_writes;
data_dir = DD_READ;
goto dispatch_find_request;
}
/*
* there are either no reads or writes have been starved
*/
if (!list_empty(&per_prio->fifo_list[DD_WRITE])) {
dispatch_writes:
BUG_ON(RB_EMPTY_ROOT(&per_prio->sort_list[DD_WRITE]));
dd->starved = 0;
data_dir = DD_WRITE;
goto dispatch_find_request;
}
return NULL;
dispatch_find_request:
/*
* we are not running a batch, find best request for selected data_dir
*/
next_rq = deadline_next_request(dd, per_prio, data_dir);
if (deadline_check_fifo(per_prio, data_dir) || !next_rq) {
/*
* A deadline has expired, the last request was in the other
* direction, or we have run out of higher-sectored requests.
* Start again from the request with the earliest expiry time.
*/
rq = deadline_fifo_request(dd, per_prio, data_dir);
} else {
/*
* The last req was the same dir and we have a next request in
* sort order. No expired requests so continue on from here.
*/
rq = next_rq;
}
/*
* For a zoned block device, if we only have writes queued and none of
* them can be dispatched, rq will be NULL.
*/
if (!rq)
return NULL;
dd->last_dir = data_dir;
dd->batching = 0;
dispatch_request:
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
if (started_after(dd, rq, latest_start))
return NULL;
/*
* rq is the selected appropriate request.
*/
dd->batching++;
deadline_move_request(dd, per_prio, rq);
done:
ioprio_class = dd_rq_ioclass(rq);
prio = ioprio_class_to_prio[ioprio_class];
dd->per_prio[prio].stats.dispatched++;
/*
* If the request needs its target zone locked, do it.
*/
blk_req_zone_write_lock(rq);
rq->rq_flags |= RQF_STARTED;
return rq;
}
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
/*
* Check whether there are any requests with priority other than DD_RT_PRIO
* that were inserted more than prio_aging_expire jiffies ago.
*/
static struct request *dd_dispatch_prio_aged_requests(struct deadline_data *dd,
unsigned long now)
{
struct request *rq;
enum dd_prio prio;
int prio_cnt;
lockdep_assert_held(&dd->lock);
prio_cnt = !!dd_queued(dd, DD_RT_PRIO) + !!dd_queued(dd, DD_BE_PRIO) +
!!dd_queued(dd, DD_IDLE_PRIO);
if (prio_cnt < 2)
return NULL;
for (prio = DD_BE_PRIO; prio <= DD_PRIO_MAX; prio++) {
rq = __dd_dispatch_request(dd, &dd->per_prio[prio],
now - dd->prio_aging_expire);
if (rq)
return rq;
}
return NULL;
}
/*
* Called from blk_mq_run_hw_queue() -> __blk_mq_sched_dispatch_requests().
*
* One confusing aspect here is that we get called for a specific
* hardware queue, but we may return a request that is for a
* different hardware queue. This is because mq-deadline has shared
* state for all hardware queues, in terms of sorting, FIFOs, etc.
*/
static struct request *dd_dispatch_request(struct blk_mq_hw_ctx *hctx)
{
struct deadline_data *dd = hctx->queue->elevator->elevator_data;
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
const unsigned long now = jiffies;
struct request *rq;
enum dd_prio prio;
spin_lock(&dd->lock);
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
rq = dd_dispatch_prio_aged_requests(dd, now);
if (rq)
goto unlock;
/*
* Next, dispatch requests in priority order. Ignore lower priority
* requests if any higher priority requests are pending.
*/
block/mq-deadline: Prioritize high-priority requests While one or more requests with a certain I/O priority are pending, do not dispatch lower priority requests. Dispatch lower priority requests anyway after the "aging" time has expired. This patch has been tested as follows: modprobe scsi_debug ndelay=1000000 max_queue=16 && sd='' && while [ -z "$sd" ]; do sd=/dev/$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done && echo $((100*1000)) > /sys/block/$sd/queue/iosched/aging_expire && cd /sys/fs/cgroup/blkio/ && echo $$ >cgroup.procs && echo restrict-to-be >blkio.prio.class && mkdir -p hipri && cd hipri && echo none-to-rt >blkio.prio.class && { max-iops -a1 -d32 -j1 -e mq-deadline $sd >& ~/low-pri.txt & } && echo $$ >cgroup.procs && max-iops -a1 -d32 -j1 -e mq-deadline $sd >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Johannes Thumshirn <johannes.thumshirn@wdc.com> Cc: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20210618004456.7280-17-bvanassche@acm.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-18 08:44:56 +08:00
for (prio = 0; prio <= DD_PRIO_MAX; prio++) {
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
rq = __dd_dispatch_request(dd, &dd->per_prio[prio], now);
if (rq || dd_queued(dd, prio))
break;
}
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
unlock:
spin_unlock(&dd->lock);
return rq;
}
/*
* Called by __blk_mq_alloc_request(). The shallow_depth value set by this
* function is used by __blk_mq_get_tag().
*/
static void dd_limit_depth(blk_opf_t opf, struct blk_mq_alloc_data *data)
{
struct deadline_data *dd = data->q->elevator->elevator_data;
/* Do not throttle synchronous reads. */
if (op_is_sync(opf) && !op_is_write(opf))
return;
/*
* Throttle asynchronous requests and writes such that these requests
* do not block the allocation of synchronous requests.
*/
data->shallow_depth = dd->async_depth;
}
/* Called by blk_mq_update_nr_requests(). */
static void dd_depth_updated(struct blk_mq_hw_ctx *hctx)
{
struct request_queue *q = hctx->queue;
struct deadline_data *dd = q->elevator->elevator_data;
struct blk_mq_tags *tags = hctx->sched_tags;
dd->async_depth = max(1UL, 3 * q->nr_requests / 4);
sbitmap_queue_min_shallow_depth(&tags->bitmap_tags, dd->async_depth);
}
/* Called by blk_mq_init_hctx() and blk_mq_init_sched(). */
static int dd_init_hctx(struct blk_mq_hw_ctx *hctx, unsigned int hctx_idx)
{
dd_depth_updated(hctx);
return 0;
}
static void dd_exit_sched(struct elevator_queue *e)
{
struct deadline_data *dd = e->elevator_data;
enum dd_prio prio;
for (prio = 0; prio <= DD_PRIO_MAX; prio++) {
struct dd_per_prio *per_prio = &dd->per_prio[prio];
const struct io_stats_per_prio *stats = &per_prio->stats;
uint32_t queued;
WARN_ON_ONCE(!list_empty(&per_prio->fifo_list[DD_READ]));
WARN_ON_ONCE(!list_empty(&per_prio->fifo_list[DD_WRITE]));
spin_lock(&dd->lock);
queued = dd_queued(dd, prio);
spin_unlock(&dd->lock);
WARN_ONCE(queued != 0,
"statistics for priority %d: i %u m %u d %u c %u\n",
prio, stats->inserted, stats->merged,
stats->dispatched, atomic_read(&stats->completed));
}
kfree(dd);
}
/*
* initialize elevator private data (deadline_data).
*/
static int dd_init_sched(struct request_queue *q, struct elevator_type *e)
{
struct deadline_data *dd;
struct elevator_queue *eq;
enum dd_prio prio;
int ret = -ENOMEM;
eq = elevator_alloc(q, e);
if (!eq)
return ret;
dd = kzalloc_node(sizeof(*dd), GFP_KERNEL, q->node);
if (!dd)
goto put_eq;
eq->elevator_data = dd;
for (prio = 0; prio <= DD_PRIO_MAX; prio++) {
struct dd_per_prio *per_prio = &dd->per_prio[prio];
INIT_LIST_HEAD(&per_prio->dispatch);
INIT_LIST_HEAD(&per_prio->fifo_list[DD_READ]);
INIT_LIST_HEAD(&per_prio->fifo_list[DD_WRITE]);
per_prio->sort_list[DD_READ] = RB_ROOT;
per_prio->sort_list[DD_WRITE] = RB_ROOT;
}
dd->fifo_expire[DD_READ] = read_expire;
dd->fifo_expire[DD_WRITE] = write_expire;
dd->writes_starved = writes_starved;
dd->front_merges = 1;
dd->last_dir = DD_WRITE;
dd->fifo_batch = fifo_batch;
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
dd->prio_aging_expire = prio_aging_expire;
spin_lock_init(&dd->lock);
spin_lock_init(&dd->zone_lock);
/* We dispatch from request queue wide instead of hw queue */
blk_queue_flag_set(QUEUE_FLAG_SQ_SCHED, q);
q->elevator = eq;
return 0;
put_eq:
kobject_put(&eq->kobj);
return ret;
}
/*
* Try to merge @bio into an existing request. If @bio has been merged into
* an existing request, store the pointer to that request into *@rq.
*/
static int dd_request_merge(struct request_queue *q, struct request **rq,
struct bio *bio)
{
struct deadline_data *dd = q->elevator->elevator_data;
const u8 ioprio_class = IOPRIO_PRIO_CLASS(bio->bi_ioprio);
const enum dd_prio prio = ioprio_class_to_prio[ioprio_class];
struct dd_per_prio *per_prio = &dd->per_prio[prio];
sector_t sector = bio_end_sector(bio);
struct request *__rq;
if (!dd->front_merges)
return ELEVATOR_NO_MERGE;
__rq = elv_rb_find(&per_prio->sort_list[bio_data_dir(bio)], sector);
if (__rq) {
BUG_ON(sector != blk_rq_pos(__rq));
if (elv_bio_merge_ok(__rq, bio)) {
*rq = __rq;
if (blk_discard_mergable(__rq))
return ELEVATOR_DISCARD_MERGE;
return ELEVATOR_FRONT_MERGE;
}
}
return ELEVATOR_NO_MERGE;
}
/*
* Attempt to merge a bio into an existing request. This function is called
* before @bio is associated with a request.
*/
kyber: fix out of bounds access when preempted __blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx for the current CPU again and uses that to get the corresponding Kyber context in the passed hctx. However, the thread may be preempted between the two calls to blk_mq_get_ctx(), and the ctx returned the second time may no longer correspond to the passed hctx. This "works" accidentally most of the time, but it can cause us to read garbage if the second ctx came from an hctx with more ctx's than the first one (i.e., if ctx->index_hw[hctx->type] > hctx->nr_ctx). This manifested as this UBSAN array index out of bounds error reported by Jakub: UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9 index 13106 is out of range for type 'long unsigned int [128]' Call Trace: dump_stack+0xa4/0xe5 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold.13+0x2a/0x34 queued_spin_lock_slowpath+0x476/0x480 do_raw_spin_lock+0x1c2/0x1d0 kyber_bio_merge+0x112/0x180 blk_mq_submit_bio+0x1f5/0x1100 submit_bio_noacct+0x7b0/0x870 submit_bio+0xc2/0x3a0 btrfs_map_bio+0x4f0/0x9d0 btrfs_submit_data_bio+0x24e/0x310 submit_one_bio+0x7f/0xb0 submit_extent_page+0xc4/0x440 __extent_writepage_io+0x2b8/0x5e0 __extent_writepage+0x28d/0x6e0 extent_write_cache_pages+0x4d7/0x7a0 extent_writepages+0xa2/0x110 do_writepages+0x8f/0x180 __writeback_single_inode+0x99/0x7f0 writeback_sb_inodes+0x34e/0x790 __writeback_inodes_wb+0x9e/0x120 wb_writeback+0x4d2/0x660 wb_workfn+0x64d/0xa10 process_one_work+0x53a/0xa80 worker_thread+0x69/0x5b0 kthread+0x20b/0x240 ret_from_fork+0x1f/0x30 Only Kyber uses the hctx, so fix it by passing the request_queue to ->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can map the queues itself to avoid the mismatch. Fixes: a6088845c2bf ("block: kyber: make kyber more friendly with merging") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Omar Sandoval <osandov@fb.com> Link: https://lore.kernel.org/r/c7598605401a48d5cfeadebb678abd10af22b83f.1620691329.git.osandov@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-05-11 08:05:35 +08:00
static bool dd_bio_merge(struct request_queue *q, struct bio *bio,
unsigned int nr_segs)
{
struct deadline_data *dd = q->elevator->elevator_data;
struct request *free = NULL;
bool ret;
spin_lock(&dd->lock);
ret = blk_mq_sched_try_merge(q, bio, nr_segs, &free);
spin_unlock(&dd->lock);
if (free)
blk_mq_free_request(free);
return ret;
}
/*
* add rq to rbtree and fifo
*/
static void dd_insert_request(struct blk_mq_hw_ctx *hctx, struct request *rq,
bool at_head)
{
struct request_queue *q = hctx->queue;
struct deadline_data *dd = q->elevator->elevator_data;
const enum dd_data_dir data_dir = rq_data_dir(rq);
u16 ioprio = req_get_ioprio(rq);
u8 ioprio_class = IOPRIO_PRIO_CLASS(ioprio);
struct dd_per_prio *per_prio;
enum dd_prio prio;
LIST_HEAD(free);
lockdep_assert_held(&dd->lock);
/*
* This may be a requeue of a write request that has locked its
* target zone. If it is the case, this releases the zone lock.
*/
blk_req_zone_write_unlock(rq);
prio = ioprio_class_to_prio[ioprio_class];
per_prio = &dd->per_prio[prio];
if (!rq->elv.priv[0]) {
per_prio->stats.inserted++;
rq->elv.priv[0] = (void *)(uintptr_t)1;
}
if (blk_mq_sched_try_insert_merge(q, rq, &free)) {
blk_mq_free_requests(&free);
return;
}
trace_block_rq_insert(rq);
if (at_head) {
list_add(&rq->queuelist, &per_prio->dispatch);
rq->fifo_time = jiffies;
} else {
deadline_add_rq_rb(per_prio, rq);
if (rq_mergeable(rq)) {
elv_rqhash_add(q, rq);
if (!q->last_merge)
q->last_merge = rq;
}
/*
* set expire time and add to fifo list
*/
rq->fifo_time = jiffies + dd->fifo_expire[data_dir];
list_add_tail(&rq->queuelist, &per_prio->fifo_list[data_dir]);
}
}
/*
* Called from blk_mq_sched_insert_request() or blk_mq_sched_insert_requests().
*/
static void dd_insert_requests(struct blk_mq_hw_ctx *hctx,
struct list_head *list, bool at_head)
{
struct request_queue *q = hctx->queue;
struct deadline_data *dd = q->elevator->elevator_data;
spin_lock(&dd->lock);
while (!list_empty(list)) {
struct request *rq;
rq = list_first_entry(list, struct request, queuelist);
list_del_init(&rq->queuelist);
dd_insert_request(hctx, rq, at_head);
}
spin_unlock(&dd->lock);
}
/* Callback from inside blk_mq_rq_ctx_init(). */
static void dd_prepare_request(struct request *rq)
{
rq->elv.priv[0] = NULL;
}
static bool dd_has_write_work(struct blk_mq_hw_ctx *hctx)
{
struct deadline_data *dd = hctx->queue->elevator->elevator_data;
enum dd_prio p;
for (p = 0; p <= DD_PRIO_MAX; p++)
if (!list_empty_careful(&dd->per_prio[p].fifo_list[DD_WRITE]))
return true;
return false;
}
/*
* Callback from inside blk_mq_free_request().
*
* For zoned block devices, write unlock the target zone of
* completed write requests. Do this while holding the zone lock
* spinlock so that the zone is never unlocked while deadline_fifo_request()
* or deadline_next_request() are executing. This function is called for
* all requests, whether or not these requests complete successfully.
block: mq-deadline: Fix queue restart handling Commit 7211aef86f79 ("block: mq-deadline: Fix write completion handling") added a call to blk_mq_sched_mark_restart_hctx() in dd_dispatch_request() to make sure that write request dispatching does not stall when all target zones are locked. This fix left a subtle race when a write completion happens during a dispatch execution on another CPU: CPU 0: Dispatch CPU1: write completion dd_dispatch_request() lock(&dd->lock); ... lock(&dd->zone_lock); dd_finish_request() rq = find request lock(&dd->zone_lock); unlock(&dd->zone_lock); zone write unlock unlock(&dd->zone_lock); ... __blk_mq_free_request check restart flag (not set) -> queue not run ... if (!rq && have writes) blk_mq_sched_mark_restart_hctx() unlock(&dd->lock) Since the dispatch context finishes after the write request completion handling, marking the queue as needing a restart is not seen from __blk_mq_free_request() and blk_mq_sched_restart() not executed leading to the dispatch stall under 100% write workloads. Fix this by moving the call to blk_mq_sched_mark_restart_hctx() from dd_dispatch_request() into dd_finish_request() under the zone lock to ensure full mutual exclusion between write request dispatch selection and zone unlock on write request completion. Fixes: 7211aef86f79 ("block: mq-deadline: Fix write completion handling") Cc: stable@vger.kernel.org Reported-by: Hans Holmberg <Hans.Holmberg@wdc.com> Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-08-28 12:40:20 +08:00
*
* For a zoned block device, __dd_dispatch_request() may have stopped
* dispatching requests if all the queued requests are write requests directed
* at zones that are already locked due to on-going write requests. To ensure
* write request dispatch progress in this case, mark the queue as needing a
* restart to ensure that the queue is run again after completion of the
* request and zones being unlocked.
*/
static void dd_finish_request(struct request *rq)
{
struct request_queue *q = rq->q;
struct deadline_data *dd = q->elevator->elevator_data;
const u8 ioprio_class = dd_rq_ioclass(rq);
const enum dd_prio prio = ioprio_class_to_prio[ioprio_class];
struct dd_per_prio *per_prio = &dd->per_prio[prio];
/*
* The block layer core may call dd_finish_request() without having
* called dd_insert_requests(). Skip requests that bypassed I/O
* scheduling. See also blk_mq_request_bypass_insert().
*/
if (!rq->elv.priv[0])
return;
atomic_inc(&per_prio->stats.completed);
if (blk_queue_is_zoned(q)) {
unsigned long flags;
spin_lock_irqsave(&dd->zone_lock, flags);
blk_req_zone_write_unlock(rq);
spin_unlock_irqrestore(&dd->zone_lock, flags);
if (dd_has_write_work(rq->mq_hctx))
blk_mq_sched_mark_restart_hctx(rq->mq_hctx);
}
}
static bool dd_has_work_for_prio(struct dd_per_prio *per_prio)
{
return !list_empty_careful(&per_prio->dispatch) ||
!list_empty_careful(&per_prio->fifo_list[DD_READ]) ||
!list_empty_careful(&per_prio->fifo_list[DD_WRITE]);
}
static bool dd_has_work(struct blk_mq_hw_ctx *hctx)
{
struct deadline_data *dd = hctx->queue->elevator->elevator_data;
enum dd_prio prio;
for (prio = 0; prio <= DD_PRIO_MAX; prio++)
if (dd_has_work_for_prio(&dd->per_prio[prio]))
return true;
return false;
}
/*
* sysfs parts below
*/
#define SHOW_INT(__FUNC, __VAR) \
static ssize_t __FUNC(struct elevator_queue *e, char *page) \
{ \
struct deadline_data *dd = e->elevator_data; \
\
return sysfs_emit(page, "%d\n", __VAR); \
}
#define SHOW_JIFFIES(__FUNC, __VAR) SHOW_INT(__FUNC, jiffies_to_msecs(__VAR))
SHOW_JIFFIES(deadline_read_expire_show, dd->fifo_expire[DD_READ]);
SHOW_JIFFIES(deadline_write_expire_show, dd->fifo_expire[DD_WRITE]);
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
SHOW_JIFFIES(deadline_prio_aging_expire_show, dd->prio_aging_expire);
SHOW_INT(deadline_writes_starved_show, dd->writes_starved);
SHOW_INT(deadline_front_merges_show, dd->front_merges);
SHOW_INT(deadline_async_depth_show, dd->async_depth);
SHOW_INT(deadline_fifo_batch_show, dd->fifo_batch);
#undef SHOW_INT
#undef SHOW_JIFFIES
#define STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, __CONV) \
static ssize_t __FUNC(struct elevator_queue *e, const char *page, size_t count) \
{ \
struct deadline_data *dd = e->elevator_data; \
int __data, __ret; \
\
__ret = kstrtoint(page, 0, &__data); \
if (__ret < 0) \
return __ret; \
if (__data < (MIN)) \
__data = (MIN); \
else if (__data > (MAX)) \
__data = (MAX); \
*(__PTR) = __CONV(__data); \
return count; \
}
#define STORE_INT(__FUNC, __PTR, MIN, MAX) \
STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, )
#define STORE_JIFFIES(__FUNC, __PTR, MIN, MAX) \
STORE_FUNCTION(__FUNC, __PTR, MIN, MAX, msecs_to_jiffies)
STORE_JIFFIES(deadline_read_expire_store, &dd->fifo_expire[DD_READ], 0, INT_MAX);
STORE_JIFFIES(deadline_write_expire_store, &dd->fifo_expire[DD_WRITE], 0, INT_MAX);
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
STORE_JIFFIES(deadline_prio_aging_expire_store, &dd->prio_aging_expire, 0, INT_MAX);
STORE_INT(deadline_writes_starved_store, &dd->writes_starved, INT_MIN, INT_MAX);
STORE_INT(deadline_front_merges_store, &dd->front_merges, 0, 1);
STORE_INT(deadline_async_depth_store, &dd->async_depth, 1, INT_MAX);
STORE_INT(deadline_fifo_batch_store, &dd->fifo_batch, 0, INT_MAX);
#undef STORE_FUNCTION
#undef STORE_INT
#undef STORE_JIFFIES
#define DD_ATTR(name) \
__ATTR(name, 0644, deadline_##name##_show, deadline_##name##_store)
static struct elv_fs_entry deadline_attrs[] = {
DD_ATTR(read_expire),
DD_ATTR(write_expire),
DD_ATTR(writes_starved),
DD_ATTR(front_merges),
DD_ATTR(async_depth),
DD_ATTR(fifo_batch),
block/mq-deadline: Prioritize high-priority requests In addition to reverting commit 7b05bf771084 ("Revert "block/mq-deadline: Prioritize high-priority requests""), this patch uses 'jiffies' instead of ktime_get() in the code for aging lower priority requests. This patch has been tested as follows: Measured QD=1/jobs=1 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: 555 K IOPS. Measured QD=1/jobs=8 IOPS for nullb with the mq-deadline scheduler. Result without and with this patch: about 380 K IOPS. Ran the following script: set -e scriptdir=$(dirname "$0") if [ -e /sys/module/scsi_debug ]; then modprobe -r scsi_debug; fi modprobe scsi_debug ndelay=1000000 max_queue=16 sd='' while [ -z "$sd" ]; do sd=$(basename /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/*) done echo $((100*1000)) > "/sys/block/$sd/queue/iosched/prio_aging_expire" if [ -e /sys/fs/cgroup/io.prio.class ]; then cd /sys/fs/cgroup echo restrict-to-be >io.prio.class echo +io > cgroup.subtree_control else cd /sys/fs/cgroup/blkio/ echo restrict-to-be >blkio.prio.class fi echo $$ >cgroup.procs mkdir -p hipri cd hipri if [ -e io.prio.class ]; then echo none-to-rt >io.prio.class else echo none-to-rt >blkio.prio.class fi { "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/low-pri.txt & } echo $$ >cgroup.procs "${scriptdir}/max-iops" -a1 -d32 -j1 -e mq-deadline "/dev/$sd" >& ~/hi-pri.txt Result: * 11000 IOPS for the high-priority job * 40 IOPS for the low-priority job If the prio aging expiry time is changed from 100s into 0, the IOPS results change into 6712 and 6796 IOPS. The max-iops script is a script that runs fio with the following arguments: --bs=4K --gtod_reduce=1 --ioengine=libaio --ioscheduler=${arg_e} --runtime=60 --norandommap --rw=read --thread --buffered=0 --numjobs=${arg_j} --iodepth=${arg_d} --iodepth_batch_submit=${arg_a} --iodepth_batch_complete=$((arg_d / 2)) --name=${positional_argument_1} --filename=${positional_argument_1} Cc: Damien Le Moal <damien.lemoal@wdc.com> Cc: Niklas Cassel <Niklas.Cassel@wdc.com> Cc: Hannes Reinecke <hare@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20210927220328.1410161-5-bvanassche@acm.org [axboe: @latest -> @latest_start] Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-09-28 06:03:28 +08:00
DD_ATTR(prio_aging_expire),
__ATTR_NULL
};
#ifdef CONFIG_BLK_DEBUG_FS
#define DEADLINE_DEBUGFS_DDIR_ATTRS(prio, data_dir, name) \
static void *deadline_##name##_fifo_start(struct seq_file *m, \
loff_t *pos) \
__acquires(&dd->lock) \
{ \
struct request_queue *q = m->private; \
struct deadline_data *dd = q->elevator->elevator_data; \
struct dd_per_prio *per_prio = &dd->per_prio[prio]; \
\
spin_lock(&dd->lock); \
return seq_list_start(&per_prio->fifo_list[data_dir], *pos); \
} \
\
static void *deadline_##name##_fifo_next(struct seq_file *m, void *v, \
loff_t *pos) \
{ \
struct request_queue *q = m->private; \
struct deadline_data *dd = q->elevator->elevator_data; \
struct dd_per_prio *per_prio = &dd->per_prio[prio]; \
\
return seq_list_next(v, &per_prio->fifo_list[data_dir], pos); \
} \
\
static void deadline_##name##_fifo_stop(struct seq_file *m, void *v) \
__releases(&dd->lock) \
{ \
struct request_queue *q = m->private; \
struct deadline_data *dd = q->elevator->elevator_data; \
\
spin_unlock(&dd->lock); \
} \
\
static const struct seq_operations deadline_##name##_fifo_seq_ops = { \
.start = deadline_##name##_fifo_start, \
.next = deadline_##name##_fifo_next, \
.stop = deadline_##name##_fifo_stop, \
.show = blk_mq_debugfs_rq_show, \
}; \
\
static int deadline_##name##_next_rq_show(void *data, \
struct seq_file *m) \
{ \
struct request_queue *q = data; \
struct deadline_data *dd = q->elevator->elevator_data; \
struct dd_per_prio *per_prio = &dd->per_prio[prio]; \
struct request *rq = per_prio->next_rq[data_dir]; \
\
if (rq) \
__blk_mq_debugfs_rq_show(m, rq); \
return 0; \
}
DEADLINE_DEBUGFS_DDIR_ATTRS(DD_RT_PRIO, DD_READ, read0);
DEADLINE_DEBUGFS_DDIR_ATTRS(DD_RT_PRIO, DD_WRITE, write0);
DEADLINE_DEBUGFS_DDIR_ATTRS(DD_BE_PRIO, DD_READ, read1);
DEADLINE_DEBUGFS_DDIR_ATTRS(DD_BE_PRIO, DD_WRITE, write1);
DEADLINE_DEBUGFS_DDIR_ATTRS(DD_IDLE_PRIO, DD_READ, read2);
DEADLINE_DEBUGFS_DDIR_ATTRS(DD_IDLE_PRIO, DD_WRITE, write2);
#undef DEADLINE_DEBUGFS_DDIR_ATTRS
static int deadline_batching_show(void *data, struct seq_file *m)
{
struct request_queue *q = data;
struct deadline_data *dd = q->elevator->elevator_data;
seq_printf(m, "%u\n", dd->batching);
return 0;
}
static int deadline_starved_show(void *data, struct seq_file *m)
{
struct request_queue *q = data;
struct deadline_data *dd = q->elevator->elevator_data;
seq_printf(m, "%u\n", dd->starved);
return 0;
}
static int dd_async_depth_show(void *data, struct seq_file *m)
{
struct request_queue *q = data;
struct deadline_data *dd = q->elevator->elevator_data;
seq_printf(m, "%u\n", dd->async_depth);
return 0;
}
static int dd_queued_show(void *data, struct seq_file *m)
{
struct request_queue *q = data;
struct deadline_data *dd = q->elevator->elevator_data;
u32 rt, be, idle;
spin_lock(&dd->lock);
rt = dd_queued(dd, DD_RT_PRIO);
be = dd_queued(dd, DD_BE_PRIO);
idle = dd_queued(dd, DD_IDLE_PRIO);
spin_unlock(&dd->lock);
seq_printf(m, "%u %u %u\n", rt, be, idle);
return 0;
}
/* Number of requests owned by the block driver for a given priority. */
static u32 dd_owned_by_driver(struct deadline_data *dd, enum dd_prio prio)
{
const struct io_stats_per_prio *stats = &dd->per_prio[prio].stats;
lockdep_assert_held(&dd->lock);
return stats->dispatched + stats->merged -
atomic_read(&stats->completed);
}
static int dd_owned_by_driver_show(void *data, struct seq_file *m)
{
struct request_queue *q = data;
struct deadline_data *dd = q->elevator->elevator_data;
u32 rt, be, idle;
spin_lock(&dd->lock);
rt = dd_owned_by_driver(dd, DD_RT_PRIO);
be = dd_owned_by_driver(dd, DD_BE_PRIO);
idle = dd_owned_by_driver(dd, DD_IDLE_PRIO);
spin_unlock(&dd->lock);
seq_printf(m, "%u %u %u\n", rt, be, idle);
return 0;
}
#define DEADLINE_DISPATCH_ATTR(prio) \
static void *deadline_dispatch##prio##_start(struct seq_file *m, \
loff_t *pos) \
__acquires(&dd->lock) \
{ \
struct request_queue *q = m->private; \
struct deadline_data *dd = q->elevator->elevator_data; \
struct dd_per_prio *per_prio = &dd->per_prio[prio]; \
\
spin_lock(&dd->lock); \
return seq_list_start(&per_prio->dispatch, *pos); \
} \
\
static void *deadline_dispatch##prio##_next(struct seq_file *m, \
void *v, loff_t *pos) \
{ \
struct request_queue *q = m->private; \
struct deadline_data *dd = q->elevator->elevator_data; \
struct dd_per_prio *per_prio = &dd->per_prio[prio]; \
\
return seq_list_next(v, &per_prio->dispatch, pos); \
} \
\
static void deadline_dispatch##prio##_stop(struct seq_file *m, void *v) \
__releases(&dd->lock) \
{ \
struct request_queue *q = m->private; \
struct deadline_data *dd = q->elevator->elevator_data; \
\
spin_unlock(&dd->lock); \
} \
\
static const struct seq_operations deadline_dispatch##prio##_seq_ops = { \
.start = deadline_dispatch##prio##_start, \
.next = deadline_dispatch##prio##_next, \
.stop = deadline_dispatch##prio##_stop, \
.show = blk_mq_debugfs_rq_show, \
}
DEADLINE_DISPATCH_ATTR(0);
DEADLINE_DISPATCH_ATTR(1);
DEADLINE_DISPATCH_ATTR(2);
#undef DEADLINE_DISPATCH_ATTR
#define DEADLINE_QUEUE_DDIR_ATTRS(name) \
{#name "_fifo_list", 0400, \
.seq_ops = &deadline_##name##_fifo_seq_ops}
#define DEADLINE_NEXT_RQ_ATTR(name) \
{#name "_next_rq", 0400, deadline_##name##_next_rq_show}
static const struct blk_mq_debugfs_attr deadline_queue_debugfs_attrs[] = {
DEADLINE_QUEUE_DDIR_ATTRS(read0),
DEADLINE_QUEUE_DDIR_ATTRS(write0),
DEADLINE_QUEUE_DDIR_ATTRS(read1),
DEADLINE_QUEUE_DDIR_ATTRS(write1),
DEADLINE_QUEUE_DDIR_ATTRS(read2),
DEADLINE_QUEUE_DDIR_ATTRS(write2),
DEADLINE_NEXT_RQ_ATTR(read0),
DEADLINE_NEXT_RQ_ATTR(write0),
DEADLINE_NEXT_RQ_ATTR(read1),
DEADLINE_NEXT_RQ_ATTR(write1),
DEADLINE_NEXT_RQ_ATTR(read2),
DEADLINE_NEXT_RQ_ATTR(write2),
{"batching", 0400, deadline_batching_show},
{"starved", 0400, deadline_starved_show},
{"async_depth", 0400, dd_async_depth_show},
{"dispatch0", 0400, .seq_ops = &deadline_dispatch0_seq_ops},
{"dispatch1", 0400, .seq_ops = &deadline_dispatch1_seq_ops},
{"dispatch2", 0400, .seq_ops = &deadline_dispatch2_seq_ops},
{"owned_by_driver", 0400, dd_owned_by_driver_show},
{"queued", 0400, dd_queued_show},
{},
};
#undef DEADLINE_QUEUE_DDIR_ATTRS
#endif
static struct elevator_type mq_deadline = {
.ops = {
.depth_updated = dd_depth_updated,
.limit_depth = dd_limit_depth,
.insert_requests = dd_insert_requests,
.dispatch_request = dd_dispatch_request,
.prepare_request = dd_prepare_request,
.finish_request = dd_finish_request,
.next_request = elv_rb_latter_request,
.former_request = elv_rb_former_request,
.bio_merge = dd_bio_merge,
.request_merge = dd_request_merge,
.requests_merged = dd_merged_requests,
.request_merged = dd_request_merged,
.has_work = dd_has_work,
.init_sched = dd_init_sched,
.exit_sched = dd_exit_sched,
.init_hctx = dd_init_hctx,
},
#ifdef CONFIG_BLK_DEBUG_FS
.queue_debugfs_attrs = deadline_queue_debugfs_attrs,
#endif
.elevator_attrs = deadline_attrs,
.elevator_name = "mq-deadline",
.elevator_alias = "deadline",
block: Introduce elevator features Introduce the definition of elevator features through the elevator_features flags in the elevator_type structure. Each flag can represent a feature supported by an elevator. The first feature defined by this patch is support for zoned block device sequential write constraint with the flag ELEVATOR_F_ZBD_SEQ_WRITE, which is implemented by the mq-deadline elevator using zone write locking. Other possible features are IO priorities, write hints, latency targets or single-LUN dual-actuator disks (for which the elevator could maintain one LBA ordered list per actuator). The required_elevator_features field is also added to the request_queue structure to allow a device driver to specify elevator feature flags that an elevator must support for the correct operation of the device (e.g. device drivers for zoned block devices can have the ELEVATOR_F_ZBD_SEQ_WRITE flag as a required feature). The helper function blk_queue_required_elevator_features() is defined for setting this new field. With these two new fields in place, the elevator functions elevator_match() and elevator_find() are modified to allow a user to set only an elevator with a set of features that satisfies the device required features. Elevators not matching the device requirements are not shown in the device sysfs queue/scheduler file to prevent their use. The "none" elevator can always be selected as before. Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-09-05 17:51:31 +08:00
.elevator_features = ELEVATOR_F_ZBD_SEQ_WRITE,
.elevator_owner = THIS_MODULE,
};
MODULE_ALIAS("mq-deadline-iosched");
static int __init deadline_init(void)
{
return elv_register(&mq_deadline);
}
static void __exit deadline_exit(void)
{
elv_unregister(&mq_deadline);
}
module_init(deadline_init);
module_exit(deadline_exit);
MODULE_AUTHOR("Jens Axboe, Damien Le Moal and Bart Van Assche");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("MQ deadline IO scheduler");