OpenCloudOS-Kernel/fs/nfsd/nfsproc.c

821 lines
21 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* Process version 2 NFS requests.
*
* Copyright (C) 1995-1997 Olaf Kirch <okir@monad.swb.de>
*/
#include <linux/namei.h>
#include "cache.h"
#include "xdr.h"
#include "vfs.h"
typedef struct svc_rqst svc_rqst;
typedef struct svc_buf svc_buf;
#define NFSDDBG_FACILITY NFSDDBG_PROC
static __be32
nfsd_proc_null(struct svc_rqst *rqstp)
{
return nfs_ok;
}
static __be32
nfsd_return_attrs(__be32 err, struct nfsd_attrstat *resp)
{
if (err) return err;
return fh_getattr(&resp->fh, &resp->stat);
}
static __be32
nfsd_return_dirop(__be32 err, struct nfsd_diropres *resp)
{
if (err) return err;
return fh_getattr(&resp->fh, &resp->stat);
}
/*
* Get a file's attributes
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
nfsd_proc_getattr(struct svc_rqst *rqstp)
{
struct nfsd_fhandle *argp = rqstp->rq_argp;
struct nfsd_attrstat *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: GETATTR %s\n", SVCFH_fmt(&argp->fh));
fh_copy(&resp->fh, &argp->fh);
nfserr = fh_verify(rqstp, &resp->fh, 0,
NFSD_MAY_NOP | NFSD_MAY_BYPASS_GSS_ON_ROOT);
return nfsd_return_attrs(nfserr, resp);
}
/*
* Set a file's attributes
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
nfsd_proc_setattr(struct svc_rqst *rqstp)
{
struct nfsd_sattrargs *argp = rqstp->rq_argp;
struct nfsd_attrstat *resp = rqstp->rq_resp;
struct iattr *iap = &argp->attrs;
struct svc_fh *fhp;
__be32 nfserr;
dprintk("nfsd: SETATTR %s, valid=%x, size=%ld\n",
SVCFH_fmt(&argp->fh),
argp->attrs.ia_valid, (long) argp->attrs.ia_size);
fhp = fh_copy(&resp->fh, &argp->fh);
/*
* NFSv2 does not differentiate between "set-[ac]time-to-now"
* which only requires access, and "set-[ac]time-to-X" which
* requires ownership.
* So if it looks like it might be "set both to the same time which
* is close to now", and if setattr_prepare fails, then we
* convert to "set to now" instead of "set to explicit time"
*
* We only call setattr_prepare as the last test as technically
* it is not an interface that we should be using.
*/
#define BOTH_TIME_SET (ATTR_ATIME_SET | ATTR_MTIME_SET)
#define MAX_TOUCH_TIME_ERROR (30*60)
if ((iap->ia_valid & BOTH_TIME_SET) == BOTH_TIME_SET &&
iap->ia_mtime.tv_sec == iap->ia_atime.tv_sec) {
/*
* Looks probable.
*
* Now just make sure time is in the right ballpark.
* Solaris, at least, doesn't seem to care what the time
* request is. We require it be within 30 minutes of now.
*/
time_t delta = iap->ia_atime.tv_sec - get_seconds();
nfserr = fh_verify(rqstp, fhp, 0, NFSD_MAY_NOP);
if (nfserr)
goto done;
if (delta < 0)
delta = -delta;
if (delta < MAX_TOUCH_TIME_ERROR &&
setattr_prepare(fhp->fh_dentry, iap) != 0) {
/*
* Turn off ATTR_[AM]TIME_SET but leave ATTR_[AM]TIME.
* This will cause notify_change to set these times
* to "now"
*/
iap->ia_valid &= ~BOTH_TIME_SET;
}
}
nfserr = nfsd_setattr(rqstp, fhp, iap, 0, (time_t)0);
done:
return nfsd_return_attrs(nfserr, resp);
}
/*
* Look up a path name component
* Note: the dentry in the resp->fh may be negative if the file
* doesn't exist yet.
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
nfsd_proc_lookup(struct svc_rqst *rqstp)
{
struct nfsd_diropargs *argp = rqstp->rq_argp;
struct nfsd_diropres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: LOOKUP %s %.*s\n",
SVCFH_fmt(&argp->fh), argp->len, argp->name);
fh_init(&resp->fh, NFS_FHSIZE);
nfserr = nfsd_lookup(rqstp, &argp->fh, argp->name, argp->len,
&resp->fh);
fh_put(&argp->fh);
return nfsd_return_dirop(nfserr, resp);
}
/*
* Read a symlink.
*/
static __be32
nfsd_proc_readlink(struct svc_rqst *rqstp)
{
struct nfsd_readlinkargs *argp = rqstp->rq_argp;
struct nfsd_readlinkres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: READLINK %s\n", SVCFH_fmt(&argp->fh));
/* Read the symlink. */
resp->len = NFS_MAXPATHLEN;
nfserr = nfsd_readlink(rqstp, &argp->fh, argp->buffer, &resp->len);
fh_put(&argp->fh);
return nfserr;
}
/*
* Read a portion of a file.
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
nfsd_proc_read(struct svc_rqst *rqstp)
{
struct nfsd_readargs *argp = rqstp->rq_argp;
struct nfsd_readres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: READ %s %d bytes at %d\n",
SVCFH_fmt(&argp->fh),
argp->count, argp->offset);
/* Obtain buffer pointer for payload. 19 is 1 word for
* status, 17 words for fattr, and 1 word for the byte count.
*/
if (NFSSVC_MAXBLKSIZE_V2 < argp->count) {
char buf[RPC_MAX_ADDRBUFLEN];
printk(KERN_NOTICE
"oversized read request from %s (%d bytes)\n",
svc_print_addr(rqstp, buf, sizeof(buf)),
argp->count);
argp->count = NFSSVC_MAXBLKSIZE_V2;
}
RPC: add wrapper for svc_reserve to account for checksum When the kernel calls svc_reserve to downsize the expected size of an RPC reply, it fails to account for the possibility of a checksum at the end of the packet. If a client mounts a NFSv2/3 with sec=krb5i/p, and does I/O then you'll generally see messages similar to this in the server's ring buffer: RPC request reserved 164 but used 208 While I was never able to verify it, I suspect that this problem is also the root cause of some oopses I've seen under these conditions: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=227726 This is probably also a problem for other sec= types and for NFSv4. The large reserved size for NFSv4 compound packets seems to generally paper over the problem, however. This patch adds a wrapper for svc_reserve that accounts for the possibility of a checksum. It also fixes up the appropriate callers of svc_reserve to call the wrapper. For now, it just uses a hardcoded value that I determined via testing. That value may need to be revised upward as things change, or we may want to eventually add a new auth_op that attempts to calculate this somehow. Unfortunately, there doesn't seem to be a good way to reliably determine the expected checksum length prior to actually calculating it, particularly with schemes like spkm3. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 17:34:50 +08:00
svc_reserve_auth(rqstp, (19<<2) + argp->count + 4);
resp->count = argp->count;
nfserr = nfsd_read(rqstp, fh_copy(&resp->fh, &argp->fh),
argp->offset,
rqstp->rq_vec, argp->vlen,
&resp->count);
if (nfserr) return nfserr;
return fh_getattr(&resp->fh, &resp->stat);
}
/*
* Write data to a file
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
nfsd_proc_write(struct svc_rqst *rqstp)
{
struct nfsd_writeargs *argp = rqstp->rq_argp;
struct nfsd_attrstat *resp = rqstp->rq_resp;
__be32 nfserr;
unsigned long cnt = argp->len;
NFSD: Clean up legacy NFS WRITE argument XDR decoders Move common code in NFSD's legacy NFS WRITE decoders into a helper. The immediate benefit is reduction of code duplication and some nice micro-optimizations (see below). In the long term, this helper can perform a per-transport call-out to fill the rq_vec (say, using RDMA Reads). The legacy WRITE decoders and procs are changed to work like NFSv4, which constructs the rq_vec just before it is about to call vfs_writev. Why? Calling a transport call-out from the proc instead of the XDR decoder means that the incoming FH can be resolved to a particular filesystem and file. This would allow pages from the backing file to be presented to the transport to be filled, rather than presenting anonymous pages and copying or flipping them into the file's page cache later. I also prefer using the pages in rq_arg.pages, instead of pulling the data pages directly out of the rqstp::rq_pages array. This is currently the way the NFSv3 write decoder works, but the other two do not seem to take this approach. Fixing this removes the only reference to rq_pages found in NFSD, eliminating an NFSD assumption about how transports use the pages in rq_pages. Lastly, avoid setting up the first element of rq_vec as a zero- length buffer. This happens with an RDMA transport when a normal Read chunk is present because the data payload is in rq_arg's page list (none of it is in the head buffer). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-27 22:54:07 +08:00
unsigned int nvecs;
dprintk("nfsd: WRITE %s %d bytes at %d\n",
SVCFH_fmt(&argp->fh),
argp->len, argp->offset);
NFSD: Clean up legacy NFS WRITE argument XDR decoders Move common code in NFSD's legacy NFS WRITE decoders into a helper. The immediate benefit is reduction of code duplication and some nice micro-optimizations (see below). In the long term, this helper can perform a per-transport call-out to fill the rq_vec (say, using RDMA Reads). The legacy WRITE decoders and procs are changed to work like NFSv4, which constructs the rq_vec just before it is about to call vfs_writev. Why? Calling a transport call-out from the proc instead of the XDR decoder means that the incoming FH can be resolved to a particular filesystem and file. This would allow pages from the backing file to be presented to the transport to be filled, rather than presenting anonymous pages and copying or flipping them into the file's page cache later. I also prefer using the pages in rq_arg.pages, instead of pulling the data pages directly out of the rqstp::rq_pages array. This is currently the way the NFSv3 write decoder works, but the other two do not seem to take this approach. Fixing this removes the only reference to rq_pages found in NFSD, eliminating an NFSD assumption about how transports use the pages in rq_pages. Lastly, avoid setting up the first element of rq_vec as a zero- length buffer. This happens with an RDMA transport when a normal Read chunk is present because the data payload is in rq_arg's page list (none of it is in the head buffer). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-27 22:54:07 +08:00
nvecs = svc_fill_write_vector(rqstp, &argp->first, cnt);
if (!nvecs)
return nfserr_io;
nfserr = nfsd_write(rqstp, fh_copy(&resp->fh, &argp->fh),
argp->offset, rqstp->rq_vec, nvecs,
&cnt, NFS_DATA_SYNC);
return nfsd_return_attrs(nfserr, resp);
}
/*
* CREATE processing is complicated. The keyword here is `overloaded.'
* The parent directory is kept locked between the check for existence
* and the actual create() call in compliance with VFS protocols.
* N.B. After this call _both_ argp->fh and resp->fh need an fh_put
*/
static __be32
nfsd_proc_create(struct svc_rqst *rqstp)
{
struct nfsd_createargs *argp = rqstp->rq_argp;
struct nfsd_diropres *resp = rqstp->rq_resp;
svc_fh *dirfhp = &argp->fh;
svc_fh *newfhp = &resp->fh;
struct iattr *attr = &argp->attrs;
struct inode *inode;
struct dentry *dchild;
int type, mode;
__be32 nfserr;
int hosterr;
dev_t rdev = 0, wanted = new_decode_dev(attr->ia_size);
dprintk("nfsd: CREATE %s %.*s\n",
SVCFH_fmt(dirfhp), argp->len, argp->name);
/* First verify the parent file handle */
nfserr = fh_verify(rqstp, dirfhp, S_IFDIR, NFSD_MAY_EXEC);
if (nfserr)
goto done; /* must fh_put dirfhp even on error */
/* Check for NFSD_MAY_WRITE in nfsd_create if necessary */
nfserr = nfserr_exist;
if (isdotent(argp->name, argp->len))
goto done;
hosterr = fh_want_write(dirfhp);
if (hosterr) {
nfserr = nfserrno(hosterr);
goto done;
}
fh_lock_nested(dirfhp, I_MUTEX_PARENT);
dchild = lookup_one_len(argp->name, dirfhp->fh_dentry, argp->len);
if (IS_ERR(dchild)) {
nfserr = nfserrno(PTR_ERR(dchild));
goto out_unlock;
}
fh_init(newfhp, NFS_FHSIZE);
nfserr = fh_compose(newfhp, dirfhp->fh_export, dchild, dirfhp);
if (!nfserr && d_really_is_negative(dchild))
nfserr = nfserr_noent;
dput(dchild);
if (nfserr) {
if (nfserr != nfserr_noent)
goto out_unlock;
/*
* If the new file handle wasn't verified, we can't tell
* whether the file exists or not. Time to bail ...
*/
nfserr = nfserr_acces;
if (!newfhp->fh_dentry) {
printk(KERN_WARNING
"nfsd_proc_create: file handle not verified\n");
goto out_unlock;
}
}
inode = d_inode(newfhp->fh_dentry);
/* Unfudge the mode bits */
if (attr->ia_valid & ATTR_MODE) {
type = attr->ia_mode & S_IFMT;
mode = attr->ia_mode & ~S_IFMT;
if (!type) {
/* no type, so if target exists, assume same as that,
* else assume a file */
if (inode) {
type = inode->i_mode & S_IFMT;
switch(type) {
case S_IFCHR:
case S_IFBLK:
/* reserve rdev for later checking */
rdev = inode->i_rdev;
attr->ia_valid |= ATTR_SIZE;
/* FALLTHROUGH */
case S_IFIFO:
/* this is probably a permission check..
* at least IRIX implements perm checking on
* echo thing > device-special-file-or-pipe
* by doing a CREATE with type==0
*/
nfserr = nfsd_permission(rqstp,
newfhp->fh_export,
newfhp->fh_dentry,
NFSD_MAY_WRITE|NFSD_MAY_LOCAL_ACCESS);
if (nfserr && nfserr != nfserr_rofs)
goto out_unlock;
}
} else
type = S_IFREG;
}
} else if (inode) {
type = inode->i_mode & S_IFMT;
mode = inode->i_mode & ~S_IFMT;
} else {
type = S_IFREG;
mode = 0; /* ??? */
}
attr->ia_valid |= ATTR_MODE;
attr->ia_mode = mode;
/* Special treatment for non-regular files according to the
* gospel of sun micro
*/
if (type != S_IFREG) {
if (type != S_IFBLK && type != S_IFCHR) {
rdev = 0;
} else if (type == S_IFCHR && !(attr->ia_valid & ATTR_SIZE)) {
/* If you think you've seen the worst, grok this. */
type = S_IFIFO;
} else {
/* Okay, char or block special */
if (!rdev)
rdev = wanted;
}
/* we've used the SIZE information, so discard it */
attr->ia_valid &= ~ATTR_SIZE;
/* Make sure the type and device matches */
nfserr = nfserr_exist;
if (inode && type != (inode->i_mode & S_IFMT))
goto out_unlock;
}
nfserr = 0;
if (!inode) {
/* File doesn't exist. Create it and set attrs */
nfserr = nfsd_create_locked(rqstp, dirfhp, argp->name,
argp->len, attr, type, rdev, newfhp);
} else if (type == S_IFREG) {
dprintk("nfsd: existing %s, valid=%x, size=%ld\n",
argp->name, attr->ia_valid, (long) attr->ia_size);
/* File already exists. We ignore all attributes except
* size, so that creat() behaves exactly like
* open(..., O_CREAT|O_TRUNC|O_WRONLY).
*/
attr->ia_valid &= ATTR_SIZE;
if (attr->ia_valid)
nfserr = nfsd_setattr(rqstp, newfhp, attr, 0, (time_t)0);
}
out_unlock:
/* We don't really need to unlock, as fh_put does it. */
fh_unlock(dirfhp);
fh_drop_write(dirfhp);
done:
fh_put(dirfhp);
return nfsd_return_dirop(nfserr, resp);
}
static __be32
nfsd_proc_remove(struct svc_rqst *rqstp)
{
struct nfsd_diropargs *argp = rqstp->rq_argp;
__be32 nfserr;
dprintk("nfsd: REMOVE %s %.*s\n", SVCFH_fmt(&argp->fh),
argp->len, argp->name);
/* Unlink. -SIFDIR means file must not be a directory */
nfserr = nfsd_unlink(rqstp, &argp->fh, -S_IFDIR, argp->name, argp->len);
fh_put(&argp->fh);
return nfserr;
}
static __be32
nfsd_proc_rename(struct svc_rqst *rqstp)
{
struct nfsd_renameargs *argp = rqstp->rq_argp;
__be32 nfserr;
dprintk("nfsd: RENAME %s %.*s -> \n",
SVCFH_fmt(&argp->ffh), argp->flen, argp->fname);
dprintk("nfsd: -> %s %.*s\n",
SVCFH_fmt(&argp->tfh), argp->tlen, argp->tname);
nfserr = nfsd_rename(rqstp, &argp->ffh, argp->fname, argp->flen,
&argp->tfh, argp->tname, argp->tlen);
fh_put(&argp->ffh);
fh_put(&argp->tfh);
return nfserr;
}
static __be32
nfsd_proc_link(struct svc_rqst *rqstp)
{
struct nfsd_linkargs *argp = rqstp->rq_argp;
__be32 nfserr;
dprintk("nfsd: LINK %s ->\n",
SVCFH_fmt(&argp->ffh));
dprintk("nfsd: %s %.*s\n",
SVCFH_fmt(&argp->tfh),
argp->tlen,
argp->tname);
nfserr = nfsd_link(rqstp, &argp->tfh, argp->tname, argp->tlen,
&argp->ffh);
fh_put(&argp->ffh);
fh_put(&argp->tfh);
return nfserr;
}
static __be32
nfsd_proc_symlink(struct svc_rqst *rqstp)
{
struct nfsd_symlinkargs *argp = rqstp->rq_argp;
struct svc_fh newfh;
__be32 nfserr;
if (argp->tlen > NFS_MAXPATHLEN)
return nfserr_nametoolong;
argp->tname = svc_fill_symlink_pathname(rqstp, &argp->first,
argp->tlen);
if (IS_ERR(argp->tname))
return nfserrno(PTR_ERR(argp->tname));
dprintk("nfsd: SYMLINK %s %.*s -> %.*s\n",
SVCFH_fmt(&argp->ffh), argp->flen, argp->fname,
argp->tlen, argp->tname);
fh_init(&newfh, NFS_FHSIZE);
nfserr = nfsd_symlink(rqstp, &argp->ffh, argp->fname, argp->flen,
argp->tname, &newfh);
fh_put(&argp->ffh);
fh_put(&newfh);
return nfserr;
}
/*
* Make directory. This operation is not idempotent.
* N.B. After this call resp->fh needs an fh_put
*/
static __be32
nfsd_proc_mkdir(struct svc_rqst *rqstp)
{
struct nfsd_createargs *argp = rqstp->rq_argp;
struct nfsd_diropres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: MKDIR %s %.*s\n", SVCFH_fmt(&argp->fh), argp->len, argp->name);
if (resp->fh.fh_dentry) {
printk(KERN_WARNING
"nfsd_proc_mkdir: response already verified??\n");
}
argp->attrs.ia_valid &= ~ATTR_SIZE;
fh_init(&resp->fh, NFS_FHSIZE);
nfserr = nfsd_create(rqstp, &argp->fh, argp->name, argp->len,
&argp->attrs, S_IFDIR, 0, &resp->fh);
fh_put(&argp->fh);
return nfsd_return_dirop(nfserr, resp);
}
/*
* Remove a directory
*/
static __be32
nfsd_proc_rmdir(struct svc_rqst *rqstp)
{
struct nfsd_diropargs *argp = rqstp->rq_argp;
__be32 nfserr;
dprintk("nfsd: RMDIR %s %.*s\n", SVCFH_fmt(&argp->fh), argp->len, argp->name);
nfserr = nfsd_unlink(rqstp, &argp->fh, S_IFDIR, argp->name, argp->len);
fh_put(&argp->fh);
return nfserr;
}
/*
* Read a portion of a directory.
*/
static __be32
nfsd_proc_readdir(struct svc_rqst *rqstp)
{
struct nfsd_readdirargs *argp = rqstp->rq_argp;
struct nfsd_readdirres *resp = rqstp->rq_resp;
int count;
__be32 nfserr;
loff_t offset;
dprintk("nfsd: READDIR %s %d bytes at %d\n",
SVCFH_fmt(&argp->fh),
argp->count, argp->cookie);
/* Shrink to the client read size */
count = (argp->count >> 2) - 2;
/* Make sure we've room for the NULL ptr & eof flag */
count -= 2;
if (count < 0)
count = 0;
resp->buffer = argp->buffer;
resp->offset = NULL;
resp->buflen = count;
resp->common.err = nfs_ok;
/* Read directory and encode entries on the fly */
offset = argp->cookie;
nfserr = nfsd_readdir(rqstp, &argp->fh, &offset,
&resp->common, nfssvc_encode_entry);
resp->count = resp->buffer - argp->buffer;
if (resp->offset)
*resp->offset = htonl(offset);
fh_put(&argp->fh);
return nfserr;
}
/*
* Get file system info
*/
static __be32
nfsd_proc_statfs(struct svc_rqst *rqstp)
{
struct nfsd_fhandle *argp = rqstp->rq_argp;
struct nfsd_statfsres *resp = rqstp->rq_resp;
__be32 nfserr;
dprintk("nfsd: STATFS %s\n", SVCFH_fmt(&argp->fh));
nfserr = nfsd_statfs(rqstp, &argp->fh, &resp->stats,
NFSD_MAY_BYPASS_GSS_ON_ROOT);
fh_put(&argp->fh);
return nfserr;
}
/*
* NFSv2 Server procedures.
* Only the results of non-idempotent operations are cached.
*/
struct nfsd_void { int dummy; };
#define ST 1 /* status */
#define FH 8 /* filehandle */
#define AT 18 /* attributes */
static const struct svc_procedure nfsd_procedures2[18] = {
[NFSPROC_NULL] = {
.pc_func = nfsd_proc_null,
.pc_decode = nfssvc_decode_void,
.pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_void),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST,
},
[NFSPROC_GETATTR] = {
.pc_func = nfsd_proc_getattr,
.pc_decode = nfssvc_decode_fhandle,
.pc_encode = nfssvc_encode_attrstat,
.pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_fhandle),
.pc_ressize = sizeof(struct nfsd_attrstat),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+AT,
},
[NFSPROC_SETATTR] = {
.pc_func = nfsd_proc_setattr,
.pc_decode = nfssvc_decode_sattrargs,
.pc_encode = nfssvc_encode_attrstat,
.pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_sattrargs),
.pc_ressize = sizeof(struct nfsd_attrstat),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+AT,
},
[NFSPROC_ROOT] = {
.pc_decode = nfssvc_decode_void,
.pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_void),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST,
},
[NFSPROC_LOOKUP] = {
.pc_func = nfsd_proc_lookup,
.pc_decode = nfssvc_decode_diropargs,
.pc_encode = nfssvc_encode_diropres,
.pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_diropargs),
.pc_ressize = sizeof(struct nfsd_diropres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+FH+AT,
},
[NFSPROC_READLINK] = {
.pc_func = nfsd_proc_readlink,
.pc_decode = nfssvc_decode_readlinkargs,
.pc_encode = nfssvc_encode_readlinkres,
.pc_argsize = sizeof(struct nfsd_readlinkargs),
.pc_ressize = sizeof(struct nfsd_readlinkres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+1+NFS_MAXPATHLEN/4,
},
[NFSPROC_READ] = {
.pc_func = nfsd_proc_read,
.pc_decode = nfssvc_decode_readargs,
.pc_encode = nfssvc_encode_readres,
.pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_readargs),
.pc_ressize = sizeof(struct nfsd_readres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+AT+1+NFSSVC_MAXBLKSIZE_V2/4,
},
[NFSPROC_WRITECACHE] = {
.pc_decode = nfssvc_decode_void,
.pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_void),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST,
},
[NFSPROC_WRITE] = {
.pc_func = nfsd_proc_write,
.pc_decode = nfssvc_decode_writeargs,
.pc_encode = nfssvc_encode_attrstat,
.pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_writeargs),
.pc_ressize = sizeof(struct nfsd_attrstat),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+AT,
},
[NFSPROC_CREATE] = {
.pc_func = nfsd_proc_create,
.pc_decode = nfssvc_decode_createargs,
.pc_encode = nfssvc_encode_diropres,
.pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_createargs),
.pc_ressize = sizeof(struct nfsd_diropres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+FH+AT,
},
[NFSPROC_REMOVE] = {
.pc_func = nfsd_proc_remove,
.pc_decode = nfssvc_decode_diropargs,
.pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_diropargs),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_REPLSTAT,
.pc_xdrressize = ST,
},
[NFSPROC_RENAME] = {
.pc_func = nfsd_proc_rename,
.pc_decode = nfssvc_decode_renameargs,
.pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_renameargs),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_REPLSTAT,
.pc_xdrressize = ST,
},
[NFSPROC_LINK] = {
.pc_func = nfsd_proc_link,
.pc_decode = nfssvc_decode_linkargs,
.pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_linkargs),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_REPLSTAT,
.pc_xdrressize = ST,
},
[NFSPROC_SYMLINK] = {
.pc_func = nfsd_proc_symlink,
.pc_decode = nfssvc_decode_symlinkargs,
.pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_symlinkargs),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_REPLSTAT,
.pc_xdrressize = ST,
},
[NFSPROC_MKDIR] = {
.pc_func = nfsd_proc_mkdir,
.pc_decode = nfssvc_decode_createargs,
.pc_encode = nfssvc_encode_diropres,
.pc_release = nfssvc_release_fhandle,
.pc_argsize = sizeof(struct nfsd_createargs),
.pc_ressize = sizeof(struct nfsd_diropres),
.pc_cachetype = RC_REPLBUFF,
.pc_xdrressize = ST+FH+AT,
},
[NFSPROC_RMDIR] = {
.pc_func = nfsd_proc_rmdir,
.pc_decode = nfssvc_decode_diropargs,
.pc_encode = nfssvc_encode_void,
.pc_argsize = sizeof(struct nfsd_diropargs),
.pc_ressize = sizeof(struct nfsd_void),
.pc_cachetype = RC_REPLSTAT,
.pc_xdrressize = ST,
},
[NFSPROC_READDIR] = {
.pc_func = nfsd_proc_readdir,
.pc_decode = nfssvc_decode_readdirargs,
.pc_encode = nfssvc_encode_readdirres,
.pc_argsize = sizeof(struct nfsd_readdirargs),
.pc_ressize = sizeof(struct nfsd_readdirres),
.pc_cachetype = RC_NOCACHE,
},
[NFSPROC_STATFS] = {
.pc_func = nfsd_proc_statfs,
.pc_decode = nfssvc_decode_fhandle,
.pc_encode = nfssvc_encode_statfsres,
.pc_argsize = sizeof(struct nfsd_fhandle),
.pc_ressize = sizeof(struct nfsd_statfsres),
.pc_cachetype = RC_NOCACHE,
.pc_xdrressize = ST+5,
},
};
static unsigned int nfsd_count2[ARRAY_SIZE(nfsd_procedures2)];
const struct svc_version nfsd_version2 = {
.vs_vers = 2,
.vs_nproc = 18,
.vs_proc = nfsd_procedures2,
.vs_count = nfsd_count2,
.vs_dispatch = nfsd_dispatch,
.vs_xdrsize = NFS2_SVC_XDRSIZE,
};
/*
* Map errnos to NFS errnos.
*/
__be32
nfserrno (int errno)
{
static struct {
__be32 nfserr;
int syserr;
} nfs_errtbl[] = {
{ nfs_ok, 0 },
{ nfserr_perm, -EPERM },
{ nfserr_noent, -ENOENT },
{ nfserr_io, -EIO },
{ nfserr_nxio, -ENXIO },
{ nfserr_fbig, -E2BIG },
{ nfserr_acces, -EACCES },
{ nfserr_exist, -EEXIST },
{ nfserr_xdev, -EXDEV },
{ nfserr_mlink, -EMLINK },
{ nfserr_nodev, -ENODEV },
{ nfserr_notdir, -ENOTDIR },
{ nfserr_isdir, -EISDIR },
{ nfserr_inval, -EINVAL },
{ nfserr_fbig, -EFBIG },
{ nfserr_nospc, -ENOSPC },
{ nfserr_rofs, -EROFS },
{ nfserr_mlink, -EMLINK },
{ nfserr_nametoolong, -ENAMETOOLONG },
{ nfserr_notempty, -ENOTEMPTY },
#ifdef EDQUOT
{ nfserr_dquot, -EDQUOT },
#endif
{ nfserr_stale, -ESTALE },
{ nfserr_jukebox, -ETIMEDOUT },
{ nfserr_jukebox, -ERESTARTSYS },
{ nfserr_jukebox, -EAGAIN },
{ nfserr_jukebox, -EWOULDBLOCK },
{ nfserr_jukebox, -ENOMEM },
{ nfserr_io, -ETXTBSY },
{ nfserr_notsupp, -EOPNOTSUPP },
{ nfserr_toosmall, -ETOOSMALL },
{ nfserr_serverfault, -ESERVERFAULT },
{ nfserr_serverfault, -ENFILE },
{ nfserr_io, -EUCLEAN },
nfsd: map the ENOKEY to nfserr_perm for avoiding warning Now that Ext4 and f2fs filesystems support encrypted directories and files, attempts to access those files may return ENOKEY, resulting in the following WARNING. Map ENOKEY to nfserr_perm instead of nfserr_io. [ 1295.411759] ------------[ cut here ]------------ [ 1295.411787] WARNING: CPU: 0 PID: 12786 at fs/nfsd/nfsproc.c:796 nfserrno+0x74/0x80 [nfsd] [ 1295.411806] nfsd: non-standard errno: -126 [ 1295.411816] Modules linked in: nfsd nfs_acl auth_rpcgss nfsv4 nfs lockd fscache tun bridge stp llc fuse ip_set nfnetlink vmw_vsock_vmci_transport vsock snd_seq_midi snd_seq_midi_event coretemp crct10dif_pclmul crc32_generic crc32_pclmul snd_ens1371 gameport ghash_clmulni_intel snd_ac97_codec f2fs intel_rapl_perf ac97_bus snd_seq ppdev snd_pcm snd_rawmidi snd_timer vmw_balloon snd_seq_device snd joydev soundcore parport_pc parport nfit acpi_cpufreq tpm_tis vmw_vmci tpm_tis_core tpm shpchp i2c_piix4 grace sunrpc xfs libcrc32c vmwgfx drm_kms_helper ttm drm crc32c_intel e1000 mptspi scsi_transport_spi serio_raw mptscsih mptbase ata_generic pata_acpi fjes [last unloaded: nfs_acl] [ 1295.412522] CPU: 0 PID: 12786 Comm: nfsd Tainted: G W 4.11.0-rc1+ #521 [ 1295.412959] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/02/2015 [ 1295.413814] Call Trace: [ 1295.414252] dump_stack+0x63/0x86 [ 1295.414666] __warn+0xcb/0xf0 [ 1295.415087] warn_slowpath_fmt+0x5f/0x80 [ 1295.415502] ? put_filp+0x42/0x50 [ 1295.415927] nfserrno+0x74/0x80 [nfsd] [ 1295.416339] nfsd_open+0xd7/0x180 [nfsd] [ 1295.416746] nfs4_get_vfs_file+0x367/0x3c0 [nfsd] [ 1295.417182] ? security_inode_permission+0x41/0x60 [ 1295.417591] nfsd4_process_open2+0x9b2/0x1200 [nfsd] [ 1295.418007] nfsd4_open+0x481/0x790 [nfsd] [ 1295.418409] nfsd4_proc_compound+0x395/0x680 [nfsd] [ 1295.418812] nfsd_dispatch+0xb8/0x1f0 [nfsd] [ 1295.419233] svc_process_common+0x4d9/0x830 [sunrpc] [ 1295.419631] svc_process+0xfe/0x1b0 [sunrpc] [ 1295.420033] nfsd+0xe9/0x150 [nfsd] [ 1295.420420] kthread+0x101/0x140 [ 1295.420802] ? nfsd_destroy+0x60/0x60 [nfsd] [ 1295.421199] ? kthread_park+0x90/0x90 [ 1295.421598] ret_from_fork+0x2c/0x40 [ 1295.421996] ---[ end trace 0d5a969cd7852e1f ]--- Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-03-10 09:52:20 +08:00
{ nfserr_perm, -ENOKEY },
};
int i;
for (i = 0; i < ARRAY_SIZE(nfs_errtbl); i++) {
if (nfs_errtbl[i].syserr == errno)
return nfs_errtbl[i].nfserr;
}
WARN_ONCE(1, "nfsd: non-standard errno: %d\n", errno);
return nfserr_io;
}