OpenCloudOS-Kernel/drivers/macintosh/adb-iop.c

298 lines
6.3 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
/*
* I/O Processor (IOP) ADB Driver
* Written and (C) 1999 by Joshua M. Thompson (funaho@jurai.org)
* Based on via-cuda.c by Paul Mackerras.
*
* 1999-07-01 (jmt) - First implementation for new driver architecture.
*
* 1999-07-31 (jmt) - First working version.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <asm/macintosh.h>
#include <asm/macints.h>
#include <asm/mac_iop.h>
#include <asm/adb_iop.h>
#include <asm/unaligned.h>
#include <linux/adb.h>
static struct adb_request *current_req;
static struct adb_request *last_req;
static unsigned int autopoll_devs;
static u8 autopoll_addr;
static enum adb_iop_state {
idle,
sending,
awaiting_reply
} adb_iop_state;
static void adb_iop_start(void);
static int adb_iop_probe(void);
static int adb_iop_init(void);
static int adb_iop_send_request(struct adb_request *, int);
static int adb_iop_write(struct adb_request *);
static int adb_iop_autopoll(int);
static void adb_iop_poll(void);
static int adb_iop_reset_bus(void);
/* ADB command byte structure */
#define ADDR_MASK 0xF0
#define OP_MASK 0x0C
#define TALK 0x0C
struct adb_driver adb_iop_driver = {
.name = "ISM IOP",
.probe = adb_iop_probe,
.init = adb_iop_init,
.send_request = adb_iop_send_request,
.autopoll = adb_iop_autopoll,
.poll = adb_iop_poll,
.reset_bus = adb_iop_reset_bus
};
static void adb_iop_done(void)
{
struct adb_request *req = current_req;
adb_iop_state = idle;
req->complete = 1;
current_req = req->next;
if (req->done)
(*req->done)(req);
if (adb_iop_state == idle)
adb_iop_start();
}
/*
* Completion routine for ADB commands sent to the IOP.
*
* This will be called when a packet has been successfully sent.
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static void adb_iop_complete(struct iop_msg *msg)
{
unsigned long flags;
local_irq_save(flags);
macintosh/adb-iop: Always wait for reply message from IOP A recent patch incorrectly altered the adb-iop state machine behaviour and introduced a regression that can appear intermittently as a malfunctioning ADB input device. This seems to be caused when reply packets from different ADB commands become mixed up, especially during the adb bus scan. Fix this by unconditionally entering the awaiting_reply state after sending an explicit command, even when the ADB command won't generate a reply from the ADB device. It turns out that the IOP always generates reply messages, even when the ADB command does not produce a reply packet (e.g. ADB Listen command). So it's not really the ADB reply packets that are being mixed up, it's the IOP messages that enclose them. The bug goes like this: 1. CPU sends a message to the IOP, expecting no response because this message contains an ADB Listen command. The ADB command is now considered complete. 2. CPU sends a second message to the IOP, this time expecting a response because this message contains an ADB Talk command. This ADB command needs a reply before it can be completed. 3. adb-iop driver receives an IOP message and assumes that it relates to the Talk command. It's actually an empty one (with flags == ADB_IOP_EXPLICIT|ADB_IOP_TIMEOUT) for the previous command. The Talk command is now considered complete but it gets the wrong reply data. 4. adb-iop driver gets another IOP response message, which contains the actual reply data for the Talk command, but this is dropped (the driver is no longer in awaiting_reply state). Cc: Joshua Thompson <funaho@jurai.org> Fixes: e2954e5f727f ("macintosh/adb-iop: Implement sending -> idle state transition") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Link: https://lore.kernel.org/r/0f0a25855391e7eaa53a50f651aea0124e8525dd.1605847196.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-11-20 12:39:56 +08:00
adb_iop_state = awaiting_reply;
local_irq_restore(flags);
}
/*
* Listen for ADB messages from the IOP.
*
macintosh/adb-iop: Always wait for reply message from IOP A recent patch incorrectly altered the adb-iop state machine behaviour and introduced a regression that can appear intermittently as a malfunctioning ADB input device. This seems to be caused when reply packets from different ADB commands become mixed up, especially during the adb bus scan. Fix this by unconditionally entering the awaiting_reply state after sending an explicit command, even when the ADB command won't generate a reply from the ADB device. It turns out that the IOP always generates reply messages, even when the ADB command does not produce a reply packet (e.g. ADB Listen command). So it's not really the ADB reply packets that are being mixed up, it's the IOP messages that enclose them. The bug goes like this: 1. CPU sends a message to the IOP, expecting no response because this message contains an ADB Listen command. The ADB command is now considered complete. 2. CPU sends a second message to the IOP, this time expecting a response because this message contains an ADB Talk command. This ADB command needs a reply before it can be completed. 3. adb-iop driver receives an IOP message and assumes that it relates to the Talk command. It's actually an empty one (with flags == ADB_IOP_EXPLICIT|ADB_IOP_TIMEOUT) for the previous command. The Talk command is now considered complete but it gets the wrong reply data. 4. adb-iop driver gets another IOP response message, which contains the actual reply data for the Talk command, but this is dropped (the driver is no longer in awaiting_reply state). Cc: Joshua Thompson <funaho@jurai.org> Fixes: e2954e5f727f ("macintosh/adb-iop: Implement sending -> idle state transition") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Link: https://lore.kernel.org/r/0f0a25855391e7eaa53a50f651aea0124e8525dd.1605847196.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-11-20 12:39:56 +08:00
* This will be called when unsolicited IOP messages are received.
* These IOP messages can carry ADB autopoll responses and also occur
* after explicit ADB commands.
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 21:55:46 +08:00
static void adb_iop_listen(struct iop_msg *msg)
{
struct adb_iopmsg *amsg = (struct adb_iopmsg *)msg->message;
u8 addr = (amsg->cmd & ADDR_MASK) >> 4;
u8 op = amsg->cmd & OP_MASK;
unsigned long flags;
bool req_done = false;
local_irq_save(flags);
/* Responses to Talk commands may be unsolicited as they are
* produced when the IOP polls devices. They are mostly timeouts.
*/
if (op == TALK && ((1 << addr) & autopoll_devs))
autopoll_addr = addr;
switch (amsg->flags & (ADB_IOP_EXPLICIT |
ADB_IOP_AUTOPOLL |
ADB_IOP_TIMEOUT)) {
case ADB_IOP_EXPLICIT:
case ADB_IOP_EXPLICIT | ADB_IOP_TIMEOUT:
if (adb_iop_state == awaiting_reply) {
struct adb_request *req = current_req;
macintosh/adb-iop: Always wait for reply message from IOP A recent patch incorrectly altered the adb-iop state machine behaviour and introduced a regression that can appear intermittently as a malfunctioning ADB input device. This seems to be caused when reply packets from different ADB commands become mixed up, especially during the adb bus scan. Fix this by unconditionally entering the awaiting_reply state after sending an explicit command, even when the ADB command won't generate a reply from the ADB device. It turns out that the IOP always generates reply messages, even when the ADB command does not produce a reply packet (e.g. ADB Listen command). So it's not really the ADB reply packets that are being mixed up, it's the IOP messages that enclose them. The bug goes like this: 1. CPU sends a message to the IOP, expecting no response because this message contains an ADB Listen command. The ADB command is now considered complete. 2. CPU sends a second message to the IOP, this time expecting a response because this message contains an ADB Talk command. This ADB command needs a reply before it can be completed. 3. adb-iop driver receives an IOP message and assumes that it relates to the Talk command. It's actually an empty one (with flags == ADB_IOP_EXPLICIT|ADB_IOP_TIMEOUT) for the previous command. The Talk command is now considered complete but it gets the wrong reply data. 4. adb-iop driver gets another IOP response message, which contains the actual reply data for the Talk command, but this is dropped (the driver is no longer in awaiting_reply state). Cc: Joshua Thompson <funaho@jurai.org> Fixes: e2954e5f727f ("macintosh/adb-iop: Implement sending -> idle state transition") Tested-by: Stan Johnson <userm57@yahoo.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Link: https://lore.kernel.org/r/0f0a25855391e7eaa53a50f651aea0124e8525dd.1605847196.git.fthain@telegraphics.com.au Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2020-11-20 12:39:56 +08:00
if (req->reply_expected) {
req->reply_len = amsg->count + 1;
memcpy(req->reply, &amsg->cmd, req->reply_len);
}
req_done = true;
}
break;
case ADB_IOP_AUTOPOLL:
if (((1 << addr) & autopoll_devs) &&
amsg->cmd == ADB_READREG(addr, 0))
adb_input(&amsg->cmd, amsg->count + 1, 1);
break;
}
msg->reply[0] = autopoll_addr ? ADB_IOP_AUTOPOLL : 0;
msg->reply[1] = 0;
msg->reply[2] = autopoll_addr ? ADB_READREG(autopoll_addr, 0) : 0;
iop_complete_message(msg);
if (req_done)
adb_iop_done();
local_irq_restore(flags);
}
/*
* Start sending an ADB packet, IOP style
*
* There isn't much to do other than hand the packet over to the IOP
* after encapsulating it in an adb_iopmsg.
*/
static void adb_iop_start(void)
{
struct adb_request *req;
struct adb_iopmsg amsg;
/* get the packet to send */
req = current_req;
if (!req)
return;
/* The IOP takes MacII-style packets, so strip the initial
* ADB_PACKET byte.
*/
amsg.flags = ADB_IOP_EXPLICIT;
amsg.count = req->nbytes - 2;
/* amsg.data immediately follows amsg.cmd, effectively making
* &amsg.cmd a pointer to the beginning of a full ADB packet.
*/
memcpy(&amsg.cmd, req->data + 1, req->nbytes - 1);
req->sent = 1;
adb_iop_state = sending;
/* Now send it. The IOP manager will call adb_iop_complete
* when the message has been sent.
*/
iop_send_message(ADB_IOP, ADB_CHAN, req, sizeof(amsg), (__u8 *)&amsg,
adb_iop_complete);
}
static int adb_iop_probe(void)
{
if (!iop_ism_present)
return -ENODEV;
return 0;
}
static int adb_iop_init(void)
{
pr_info("adb: IOP ISM driver v0.4 for Unified ADB\n");
iop_listen(ADB_IOP, ADB_CHAN, adb_iop_listen, "ADB");
return 0;
}
static int adb_iop_send_request(struct adb_request *req, int sync)
{
int err;
err = adb_iop_write(req);
if (err)
return err;
if (sync) {
while (!req->complete)
adb_iop_poll();
}
return 0;
}
static int adb_iop_write(struct adb_request *req)
{
unsigned long flags;
if ((req->nbytes < 2) || (req->data[0] != ADB_PACKET)) {
req->complete = 1;
return -EINVAL;
}
req->next = NULL;
req->sent = 0;
req->complete = 0;
req->reply_len = 0;
local_irq_save(flags);
if (current_req) {
last_req->next = req;
last_req = req;
} else {
current_req = req;
last_req = req;
}
if (adb_iop_state == idle)
adb_iop_start();
local_irq_restore(flags);
return 0;
}
static void adb_iop_set_ap_complete(struct iop_msg *msg)
{
struct adb_iopmsg *amsg = (struct adb_iopmsg *)msg->message;
autopoll_devs = get_unaligned_be16(amsg->data);
if (autopoll_devs & (1 << autopoll_addr))
return;
autopoll_addr = autopoll_devs ? (ffs(autopoll_devs) - 1) : 0;
}
static int adb_iop_autopoll(int devs)
{
struct adb_iopmsg amsg;
unsigned long flags;
unsigned int mask = (unsigned int)devs & 0xFFFE;
local_irq_save(flags);
amsg.flags = ADB_IOP_SET_AUTOPOLL | (mask ? ADB_IOP_AUTOPOLL : 0);
amsg.count = 2;
amsg.cmd = 0;
put_unaligned_be16(mask, amsg.data);
iop_send_message(ADB_IOP, ADB_CHAN, NULL, sizeof(amsg), (__u8 *)&amsg,
adb_iop_set_ap_complete);
local_irq_restore(flags);
return 0;
}
static void adb_iop_poll(void)
{
iop_ism_irq_poll(ADB_IOP);
}
static int adb_iop_reset_bus(void)
{
struct adb_request req;
/* Command = 0, Address = ignored */
adb_request(&req, NULL, ADBREQ_NOSEND, 1, ADB_BUSRESET);
adb_iop_send_request(&req, 1);
/* Don't want any more requests during the Global Reset low time. */
mdelay(3);
return 0;
}