OpenCloudOS-Kernel/drivers/misc/mei/hw-me.c

387 lines
8.5 KiB
C
Raw Normal View History

staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
/*
*
* Intel Management Engine Interface (Intel MEI) Linux driver
* Copyright (c) 2003-2012, Intel Corporation.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
*/
#include <linux/pci.h>
#include <linux/mei.h>
#include "mei_dev.h"
#include "hw-me.h"
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
/**
* mei_reg_read - Reads 32bit data from the mei device
*
* @dev: the device structure
* @offset: offset from which to read the data
*
* returns register value (u32)
*/
static inline u32 mei_reg_read(const struct mei_device *dev,
unsigned long offset)
{
return ioread32(dev->mem_addr + offset);
}
/**
* mei_reg_write - Writes 32bit data to the mei device
*
* @dev: the device structure
* @offset: offset from which to write the data
* @value: register value to write (u32)
*/
static inline void mei_reg_write(const struct mei_device *dev,
unsigned long offset, u32 value)
{
iowrite32(value, dev->mem_addr + offset);
}
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
/**
* mei_mecbrw_read - Reads 32bit data from ME circular buffer
* read window register
*
* @dev: the device structure
*
* returns ME_CB_RW register value (u32)
*/
u32 mei_mecbrw_read(const struct mei_device *dev)
{
return mei_reg_read(dev, ME_CB_RW);
}
/**
* mei_mecsr_read - Reads 32bit data from the ME CSR
*
* @dev: the device structure
*
* returns ME_CSR_HA register value (u32)
*/
static inline u32 mei_mecsr_read(const struct mei_device *dev)
{
return mei_reg_read(dev, ME_CSR_HA);
}
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
/**
* mei_hcsr_read - Reads 32bit data from the host CSR
*
* @dev: the device structure
*
* returns H_CSR register value (u32)
*/
static inline u32 mei_hcsr_read(const struct mei_device *dev)
{
return mei_reg_read(dev, H_CSR);
}
/**
* mei_hcsr_set - writes H_CSR register to the mei device,
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
* and ignores the H_IS bit for it is write-one-to-zero.
*
* @dev: the device structure
*/
static inline void mei_hcsr_set(struct mei_device *dev, u32 hcsr)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
{
hcsr &= ~H_IS;
mei_reg_write(dev, H_CSR, hcsr);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
}
/**
* me_hw_config - configure hw dependent settings
*
* @dev: mei device
*/
void mei_hw_config(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
/* Doesn't change in runtime */
dev->hbuf_depth = (hcsr & H_CBD) >> 24;
}
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
/**
* mei_clear_interrupts - clear and stop interrupts
*
* @dev: the device structure
*/
void mei_clear_interrupts(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
if ((hcsr & H_IS) == H_IS)
mei_reg_write(dev, H_CSR, hcsr);
}
/**
* mei_enable_interrupts - enables mei device interrupts
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
*
* @dev: the device structure
*/
void mei_enable_interrupts(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
hcsr |= H_IE;
mei_hcsr_set(dev, hcsr);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
}
/**
* mei_disable_interrupts - disables mei device interrupts
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
*
* @dev: the device structure
*/
void mei_disable_interrupts(struct mei_device *dev)
{
u32 hcsr = mei_hcsr_read(dev);
hcsr &= ~H_IE;
mei_hcsr_set(dev, hcsr);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
}
/**
* mei_hw_reset - resets fw via mei csr register.
*
* @dev: the device structure
* @interrupts_enabled: if interrupt should be enabled after reset.
*/
void mei_hw_reset(struct mei_device *dev, bool intr_enable)
{
u32 hcsr = mei_hcsr_read(dev);
dev_dbg(&dev->pdev->dev, "before reset HCSR = 0x%08x.\n", hcsr);
hcsr |= (H_RST | H_IG);
if (intr_enable)
hcsr |= H_IE;
else
hcsr &= ~H_IE;
mei_hcsr_set(dev, hcsr);
hcsr = mei_hcsr_read(dev) | H_IG;
hcsr &= ~H_RST;
mei_hcsr_set(dev, hcsr);
hcsr = mei_hcsr_read(dev);
dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", hcsr);
}
/**
* mei_host_set_ready - enable device
*
* @dev - mei device
* returns bool
*/
void mei_host_set_ready(struct mei_device *dev)
{
dev->host_hw_state |= H_IE | H_IG | H_RDY;
mei_hcsr_set(dev, dev->host_hw_state);
}
/**
* mei_host_is_ready - check whether the host has turned ready
*
* @dev - mei device
* returns bool
*/
bool mei_host_is_ready(struct mei_device *dev)
{
dev->host_hw_state = mei_hcsr_read(dev);
return (dev->host_hw_state & H_RDY) == H_RDY;
}
/**
* mei_me_is_ready - check whether the me has turned ready
*
* @dev - mei device
* returns bool
*/
bool mei_me_is_ready(struct mei_device *dev)
{
dev->me_hw_state = mei_mecsr_read(dev);
return (dev->me_hw_state & ME_RDY_HRA) == ME_RDY_HRA;
}
/**
* mei_interrupt_quick_handler - The ISR of the MEI device
*
* @irq: The irq number
* @dev_id: pointer to the device structure
*
* returns irqreturn_t
*/
irqreturn_t mei_interrupt_quick_handler(int irq, void *dev_id)
{
struct mei_device *dev = (struct mei_device *) dev_id;
u32 csr_reg = mei_hcsr_read(dev);
if ((csr_reg & H_IS) != H_IS)
return IRQ_NONE;
/* clear H_IS bit in H_CSR */
mei_reg_write(dev, H_CSR, csr_reg);
return IRQ_WAKE_THREAD;
}
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
/**
* mei_hbuf_filled_slots - gets number of device filled buffer slots
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
*
* @device: the device structure
*
* returns number of filled slots
*/
static unsigned char mei_hbuf_filled_slots(struct mei_device *dev)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
{
char read_ptr, write_ptr;
dev->host_hw_state = mei_hcsr_read(dev);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
read_ptr = (char) ((dev->host_hw_state & H_CBRP) >> 8);
write_ptr = (char) ((dev->host_hw_state & H_CBWP) >> 16);
return (unsigned char) (write_ptr - read_ptr);
}
/**
* mei_hbuf_is_empty - checks if host buffer is empty.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
*
* @dev: the device structure
*
* returns true if empty, false - otherwise.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
*/
bool mei_hbuf_is_empty(struct mei_device *dev)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
{
return mei_hbuf_filled_slots(dev) == 0;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
}
/**
* mei_hbuf_empty_slots - counts write empty slots.
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
*
* @dev: the device structure
*
* returns -1(ESLOTS_OVERFLOW) if overflow, otherwise empty slots count
*/
int mei_hbuf_empty_slots(struct mei_device *dev)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
{
unsigned char filled_slots, empty_slots;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
filled_slots = mei_hbuf_filled_slots(dev);
empty_slots = dev->hbuf_depth - filled_slots;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
/* check for overflow */
if (filled_slots > dev->hbuf_depth)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
return -EOVERFLOW;
return empty_slots;
}
/**
* mei_write_message - writes a message to mei device.
*
* @dev: the device structure
* @hader: mei HECI header of message
* @buf: message payload will be written
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
*
* This function returns -EIO if write has failed
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
*/
int mei_write_message(struct mei_device *dev, struct mei_msg_hdr *header,
unsigned char *buf)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
{
unsigned long rem, dw_cnt;
unsigned long length = header->length;
u32 *reg_buf = (u32 *)buf;
u32 hcsr;
int i;
int empty_slots;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header));
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
empty_slots = mei_hbuf_empty_slots(dev);
dev_dbg(&dev->pdev->dev, "empty slots = %hu.\n", empty_slots);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
dw_cnt = mei_data2slots(length);
if (empty_slots < 0 || dw_cnt > empty_slots)
return -EIO;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
mei_reg_write(dev, H_CB_WW, *((u32 *) header));
for (i = 0; i < length / 4; i++)
mei_reg_write(dev, H_CB_WW, reg_buf[i]);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
rem = length & 0x3;
if (rem > 0) {
u32 reg = 0;
memcpy(&reg, &buf[length - rem], rem);
mei_reg_write(dev, H_CB_WW, reg);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
}
hcsr = mei_hcsr_read(dev) | H_IG;
mei_hcsr_set(dev, hcsr);
if (!mei_me_is_ready(dev))
return -EIO;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
return 0;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
}
/**
* mei_count_full_read_slots - counts read full slots.
*
* @dev: the device structure
*
* returns -1(ESLOTS_OVERFLOW) if overflow, otherwise filled slots count
*/
int mei_count_full_read_slots(struct mei_device *dev)
{
char read_ptr, write_ptr;
unsigned char buffer_depth, filled_slots;
dev->me_hw_state = mei_mecsr_read(dev);
buffer_depth = (unsigned char)((dev->me_hw_state & ME_CBD_HRA) >> 24);
read_ptr = (char) ((dev->me_hw_state & ME_CBRP_HRA) >> 8);
write_ptr = (char) ((dev->me_hw_state & ME_CBWP_HRA) >> 16);
filled_slots = (unsigned char) (write_ptr - read_ptr);
/* check for overflow */
if (filled_slots > buffer_depth)
return -EOVERFLOW;
dev_dbg(&dev->pdev->dev, "filled_slots =%08x\n", filled_slots);
return (int)filled_slots;
}
/**
* mei_read_slots - reads a message from mei device.
*
* @dev: the device structure
* @buffer: message buffer will be written
* @buffer_length: message size will be read
*/
void mei_read_slots(struct mei_device *dev, unsigned char *buffer,
unsigned long buffer_length)
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
{
u32 *reg_buf = (u32 *)buffer;
u32 hcsr;
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
for (; buffer_length >= sizeof(u32); buffer_length -= sizeof(u32))
*reg_buf++ = mei_mecbrw_read(dev);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
if (buffer_length > 0) {
u32 reg = mei_mecbrw_read(dev);
memcpy(reg_buf, &reg, buffer_length);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
}
hcsr = mei_hcsr_read(dev) | H_IG;
mei_hcsr_set(dev, hcsr);
staging/mei: MEI link layer Implementation of the communication between host and ME. connect/disconnect to/from a client, send MEI message, read MEI message, flow control handling. Each MEI message has mei_msg_hdr followed by a payload. Driver is oblivious the payload. ME Address/ID - This is the logical address of the ME feature/client of that message. Host Address/ID - This is the logical address of the Host client of that message Length - This is the Length of message payload in bytes Reserved - reserved for future use. Message Complete - This bit is used to indicative that this is the last message of multi message MEI transfer of a client message that is larger then the MEI circular buffer. Payload - Message payload (data) up to 512bytes The HW data registers are consist two circular buffers, one for data from ME and other data from Host application. Each buffer has two pointers, read_ptr (H_CBRP) and write_ptr (H_CBWP). The buffers size is defined by depth value that exists in the status registers (H_CBD and ME_CBD_HRA). Every read from ME circular buffer cause read_ptr++ Every write to the Host circular buffer write_ptr++ Flow control MEI message that ME and MEI Driver use to notify each other that a ME feature/client or Host client buffer is ready to receive data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Itzhak Tzeel-Krupp <itzhak.tzeel-krupp@intel.com> Signed-off-by: Oren Weil <oren.jer.weil@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-15 18:43:43 +08:00
}