OpenCloudOS-Kernel/net/mac80211/mesh.c

1416 lines
39 KiB
C
Raw Normal View History

/*
* Copyright (c) 2008, 2009 open80211s Ltd.
* Authors: Luis Carlos Cobo <luisca@cozybit.com>
* Javier Cardona <javier@cozybit.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <asm/unaligned.h>
#include "ieee80211_i.h"
#include "mesh.h"
#include "driver-ops.h"
static int mesh_allocated;
static struct kmem_cache *rm_cache;
bool mesh_action_is_path_sel(struct ieee80211_mgmt *mgmt)
{
return (mgmt->u.action.u.mesh_action.action_code ==
WLAN_MESH_ACTION_HWMP_PATH_SELECTION);
}
void ieee80211s_init(void)
{
mesh_pathtbl_init();
mesh_allocated = 1;
rm_cache = kmem_cache_create("mesh_rmc", sizeof(struct rmc_entry),
0, 0, NULL);
}
void ieee80211s_stop(void)
{
if (!mesh_allocated)
return;
mesh_pathtbl_unregister();
kmem_cache_destroy(rm_cache);
}
static void ieee80211_mesh_housekeeping_timer(unsigned long data)
{
struct ieee80211_sub_if_data *sdata = (void *) data;
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
ieee80211_queue_work(&local->hw, &sdata->work);
}
/**
* mesh_matches_local - check if the config of a mesh point matches ours
*
* @sdata: local mesh subif
* @ie: information elements of a management frame from the mesh peer
*
* This function checks if the mesh configuration of a mesh point matches the
* local mesh configuration, i.e. if both nodes belong to the same mesh network.
*/
bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
struct ieee802_11_elems *ie)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
u32 basic_rates = 0;
struct cfg80211_chan_def sta_chan_def;
/*
* As support for each feature is added, check for matching
* - On mesh config capabilities
* - Power Save Support En
* - Sync support enabled
* - Sync support active
* - Sync support required from peer
* - MDA enabled
* - Power management control on fc
*/
if (!(ifmsh->mesh_id_len == ie->mesh_id_len &&
memcmp(ifmsh->mesh_id, ie->mesh_id, ie->mesh_id_len) == 0 &&
(ifmsh->mesh_pp_id == ie->mesh_config->meshconf_psel) &&
(ifmsh->mesh_pm_id == ie->mesh_config->meshconf_pmetric) &&
(ifmsh->mesh_cc_id == ie->mesh_config->meshconf_congest) &&
(ifmsh->mesh_sp_id == ie->mesh_config->meshconf_synch) &&
(ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)))
return false;
ieee80211_sta_get_rates(sdata, ie, ieee80211_get_sdata_band(sdata),
&basic_rates);
if (sdata->vif.bss_conf.basic_rates != basic_rates)
return false;
ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan,
ie->ht_operation, &sta_chan_def);
ieee80211_vht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan,
ie->vht_operation, &sta_chan_def);
if (!cfg80211_chandef_compatible(&sdata->vif.bss_conf.chandef,
&sta_chan_def))
return false;
return true;
}
/**
* mesh_peer_accepts_plinks - check if an mp is willing to establish peer links
*
* @ie: information elements of a management frame from the mesh peer
*/
bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie)
{
return (ie->mesh_config->meshconf_cap &
IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS) != 0;
}
/**
* mesh_accept_plinks_update - update accepting_plink in local mesh beacons
*
* @sdata: mesh interface in which mesh beacons are going to be updated
*
* Returns: beacon changed flag if the beacon content changed.
*/
u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata)
{
bool free_plinks;
u32 changed = 0;
/* In case mesh_plink_free_count > 0 and mesh_plinktbl_capacity == 0,
* the mesh interface might be able to establish plinks with peers that
* are already on the table but are not on PLINK_ESTAB state. However,
* in general the mesh interface is not accepting peer link requests
* from new peers, and that must be reflected in the beacon
*/
free_plinks = mesh_plink_availables(sdata);
if (free_plinks != sdata->u.mesh.accepting_plinks) {
sdata->u.mesh.accepting_plinks = free_plinks;
changed = BSS_CHANGED_BEACON;
}
return changed;
}
/*
* mesh_sta_cleanup - clean up any mesh sta state
*
* @sta: mesh sta to clean up.
*/
void mesh_sta_cleanup(struct sta_info *sta)
{
struct ieee80211_sub_if_data *sdata = sta->sdata;
u32 changed;
/*
* maybe userspace handles peer allocation and peering, but in either
* case the beacon is still generated by the kernel and we might need
* an update.
*/
changed = mesh_accept_plinks_update(sdata);
if (!sdata->u.mesh.user_mpm) {
changed |= mesh_plink_deactivate(sta);
del_timer_sync(&sta->mesh->plink_timer);
}
if (changed)
ieee80211_mbss_info_change_notify(sdata, changed);
}
int mesh_rmc_init(struct ieee80211_sub_if_data *sdata)
{
int i;
sdata->u.mesh.rmc = kmalloc(sizeof(struct mesh_rmc), GFP_KERNEL);
if (!sdata->u.mesh.rmc)
return -ENOMEM;
sdata->u.mesh.rmc->idx_mask = RMC_BUCKETS - 1;
for (i = 0; i < RMC_BUCKETS; i++)
INIT_LIST_HEAD(&sdata->u.mesh.rmc->bucket[i]);
return 0;
}
void mesh_rmc_free(struct ieee80211_sub_if_data *sdata)
{
struct mesh_rmc *rmc = sdata->u.mesh.rmc;
struct rmc_entry *p, *n;
int i;
if (!sdata->u.mesh.rmc)
return;
for (i = 0; i < RMC_BUCKETS; i++) {
list_for_each_entry_safe(p, n, &rmc->bucket[i], list) {
list_del(&p->list);
kmem_cache_free(rm_cache, p);
}
}
kfree(rmc);
sdata->u.mesh.rmc = NULL;
}
/**
* mesh_rmc_check - Check frame in recent multicast cache and add if absent.
*
* @sdata: interface
* @sa: source address
* @mesh_hdr: mesh_header
*
* Returns: 0 if the frame is not in the cache, nonzero otherwise.
*
* Checks using the source address and the mesh sequence number if we have
* received this frame lately. If the frame is not in the cache, it is added to
* it.
*/
int mesh_rmc_check(struct ieee80211_sub_if_data *sdata,
const u8 *sa, struct ieee80211s_hdr *mesh_hdr)
{
struct mesh_rmc *rmc = sdata->u.mesh.rmc;
u32 seqnum = 0;
int entries = 0;
u8 idx;
struct rmc_entry *p, *n;
/* Don't care about endianness since only match matters */
memcpy(&seqnum, &mesh_hdr->seqnum, sizeof(mesh_hdr->seqnum));
idx = le32_to_cpu(mesh_hdr->seqnum) & rmc->idx_mask;
list_for_each_entry_safe(p, n, &rmc->bucket[idx], list) {
++entries;
if (time_after(jiffies, p->exp_time) ||
entries == RMC_QUEUE_MAX_LEN) {
list_del(&p->list);
kmem_cache_free(rm_cache, p);
--entries;
} else if ((seqnum == p->seqnum) && ether_addr_equal(sa, p->sa))
return -1;
}
p = kmem_cache_alloc(rm_cache, GFP_ATOMIC);
if (!p)
return 0;
p->seqnum = seqnum;
p->exp_time = jiffies + RMC_TIMEOUT;
memcpy(p->sa, sa, ETH_ALEN);
list_add(&p->list, &rmc->bucket[idx]);
return 0;
}
int mesh_add_meshconf_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
u8 *pos, neighbors;
u8 meshconf_len = sizeof(struct ieee80211_meshconf_ie);
if (skb_tailroom(skb) < 2 + meshconf_len)
return -ENOMEM;
pos = skb_put(skb, 2 + meshconf_len);
*pos++ = WLAN_EID_MESH_CONFIG;
*pos++ = meshconf_len;
/* save a pointer for quick updates in pre-tbtt */
ifmsh->meshconf_offset = pos - skb->data;
/* Active path selection protocol ID */
*pos++ = ifmsh->mesh_pp_id;
/* Active path selection metric ID */
*pos++ = ifmsh->mesh_pm_id;
/* Congestion control mode identifier */
*pos++ = ifmsh->mesh_cc_id;
/* Synchronization protocol identifier */
*pos++ = ifmsh->mesh_sp_id;
/* Authentication Protocol identifier */
*pos++ = ifmsh->mesh_auth_id;
/* Mesh Formation Info - number of neighbors */
neighbors = atomic_read(&ifmsh->estab_plinks);
neighbors = min_t(int, neighbors, IEEE80211_MAX_MESH_PEERINGS);
*pos++ = neighbors << 1;
/* Mesh capability */
*pos = 0x00;
*pos |= ifmsh->mshcfg.dot11MeshForwarding ?
IEEE80211_MESHCONF_CAPAB_FORWARDING : 0x00;
*pos |= ifmsh->accepting_plinks ?
IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS : 0x00;
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31 01:14:08 +08:00
/* Mesh PS mode. See IEEE802.11-2012 8.4.2.100.8 */
*pos |= ifmsh->ps_peers_deep_sleep ?
IEEE80211_MESHCONF_CAPAB_POWER_SAVE_LEVEL : 0x00;
*pos++ |= ifmsh->adjusting_tbtt ?
IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING : 0x00;
*pos++ = 0x00;
return 0;
}
int mesh_add_meshid_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
u8 *pos;
if (skb_tailroom(skb) < 2 + ifmsh->mesh_id_len)
return -ENOMEM;
pos = skb_put(skb, 2 + ifmsh->mesh_id_len);
*pos++ = WLAN_EID_MESH_ID;
*pos++ = ifmsh->mesh_id_len;
if (ifmsh->mesh_id_len)
memcpy(pos, ifmsh->mesh_id, ifmsh->mesh_id_len);
return 0;
}
static int mesh_add_awake_window_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31 01:14:08 +08:00
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
u8 *pos;
/* see IEEE802.11-2012 13.14.6 */
if (ifmsh->ps_peers_light_sleep == 0 &&
ifmsh->ps_peers_deep_sleep == 0 &&
ifmsh->nonpeer_pm == NL80211_MESH_POWER_ACTIVE)
return 0;
if (skb_tailroom(skb) < 4)
return -ENOMEM;
pos = skb_put(skb, 2 + 2);
*pos++ = WLAN_EID_MESH_AWAKE_WINDOW;
*pos++ = 2;
put_unaligned_le16(ifmsh->mshcfg.dot11MeshAwakeWindowDuration, pos);
return 0;
}
int mesh_add_vendor_ies(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
u8 offset, len;
const u8 *data;
if (!ifmsh->ie || !ifmsh->ie_len)
return 0;
/* fast-forward to vendor IEs */
offset = ieee80211_ie_split_vendor(ifmsh->ie, ifmsh->ie_len, 0);
if (offset) {
len = ifmsh->ie_len - offset;
data = ifmsh->ie + offset;
if (skb_tailroom(skb) < len)
return -ENOMEM;
memcpy(skb_put(skb, len), data, len);
}
return 0;
}
int mesh_add_rsn_ie(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
u8 len = 0;
const u8 *data;
if (!ifmsh->ie || !ifmsh->ie_len)
return 0;
/* find RSN IE */
data = cfg80211_find_ie(WLAN_EID_RSN, ifmsh->ie, ifmsh->ie_len);
if (!data)
return 0;
len = data[1] + 2;
if (skb_tailroom(skb) < len)
return -ENOMEM;
memcpy(skb_put(skb, len), data, len);
return 0;
}
static int mesh_add_ds_params_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_channel *chan;
u8 *pos;
if (skb_tailroom(skb) < 3)
return -ENOMEM;
rcu_read_lock();
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
if (WARN_ON(!chanctx_conf)) {
rcu_read_unlock();
return -EINVAL;
}
chan = chanctx_conf->def.chan;
rcu_read_unlock();
pos = skb_put(skb, 2 + 1);
*pos++ = WLAN_EID_DS_PARAMS;
*pos++ = 1;
*pos++ = ieee80211_frequency_to_channel(chan->center_freq);
return 0;
}
int mesh_add_ht_cap_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_local *local = sdata->local;
enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
struct ieee80211_supported_band *sband;
u8 *pos;
sband = local->hw.wiphy->bands[band];
if (!sband->ht_cap.ht_supported ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
return 0;
if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap))
return -ENOMEM;
pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_cap));
ieee80211_ie_build_ht_cap(pos, &sband->ht_cap, sband->ht_cap.cap);
return 0;
}
int mesh_add_ht_oper_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_channel *channel;
struct ieee80211_supported_band *sband;
struct ieee80211_sta_ht_cap *ht_cap;
u8 *pos;
rcu_read_lock();
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
if (WARN_ON(!chanctx_conf)) {
rcu_read_unlock();
return -EINVAL;
}
channel = chanctx_conf->def.chan;
rcu_read_unlock();
sband = local->hw.wiphy->bands[channel->band];
ht_cap = &sband->ht_cap;
if (!ht_cap->ht_supported ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
return 0;
if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_operation))
return -ENOMEM;
pos = skb_put(skb, 2 + sizeof(struct ieee80211_ht_operation));
ieee80211_ie_build_ht_oper(pos, ht_cap, &sdata->vif.bss_conf.chandef,
sdata->vif.bss_conf.ht_operation_mode);
return 0;
}
int mesh_add_vht_cap_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_local *local = sdata->local;
enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
struct ieee80211_supported_band *sband;
u8 *pos;
sband = local->hw.wiphy->bands[band];
if (!sband->vht_cap.vht_supported ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
return 0;
if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_cap))
return -ENOMEM;
pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_cap));
ieee80211_ie_build_vht_cap(pos, &sband->vht_cap, sband->vht_cap.cap);
return 0;
}
int mesh_add_vht_oper_ie(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_chanctx_conf *chanctx_conf;
struct ieee80211_channel *channel;
struct ieee80211_supported_band *sband;
struct ieee80211_sta_vht_cap *vht_cap;
u8 *pos;
rcu_read_lock();
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
if (WARN_ON(!chanctx_conf)) {
rcu_read_unlock();
return -EINVAL;
}
channel = chanctx_conf->def.chan;
rcu_read_unlock();
sband = local->hw.wiphy->bands[channel->band];
vht_cap = &sband->vht_cap;
if (!vht_cap->vht_supported ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_5 ||
sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_10)
return 0;
if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_vht_operation))
return -ENOMEM;
pos = skb_put(skb, 2 + sizeof(struct ieee80211_vht_operation));
ieee80211_ie_build_vht_oper(pos, vht_cap,
&sdata->vif.bss_conf.chandef);
return 0;
}
static void ieee80211_mesh_path_timer(unsigned long data)
{
struct ieee80211_sub_if_data *sdata =
(struct ieee80211_sub_if_data *) data;
ieee80211_queue_work(&sdata->local->hw, &sdata->work);
}
static void ieee80211_mesh_path_root_timer(unsigned long data)
{
struct ieee80211_sub_if_data *sdata =
(struct ieee80211_sub_if_data *) data;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
ieee80211_queue_work(&sdata->local->hw, &sdata->work);
}
void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh)
{
if (ifmsh->mshcfg.dot11MeshHWMPRootMode > IEEE80211_ROOTMODE_ROOT)
set_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
else {
clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags);
/* stop running timer */
del_timer_sync(&ifmsh->mesh_path_root_timer);
}
}
/**
* ieee80211_fill_mesh_addresses - fill addresses of a locally originated mesh frame
* @hdr: 802.11 frame header
* @fc: frame control field
* @meshda: destination address in the mesh
* @meshsa: source address address in the mesh. Same as TA, as frame is
* locally originated.
*
* Return the length of the 802.11 (does not include a mesh control header)
*/
int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc,
const u8 *meshda, const u8 *meshsa)
{
if (is_multicast_ether_addr(meshda)) {
*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS);
/* DA TA SA */
memcpy(hdr->addr1, meshda, ETH_ALEN);
memcpy(hdr->addr2, meshsa, ETH_ALEN);
memcpy(hdr->addr3, meshsa, ETH_ALEN);
return 24;
} else {
*fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
/* RA TA DA SA */
eth_zero_addr(hdr->addr1); /* RA is resolved later */
memcpy(hdr->addr2, meshsa, ETH_ALEN);
memcpy(hdr->addr3, meshda, ETH_ALEN);
memcpy(hdr->addr4, meshsa, ETH_ALEN);
return 30;
}
}
/**
* ieee80211_new_mesh_header - create a new mesh header
* @sdata: mesh interface to be used
* @meshhdr: uninitialized mesh header
* @addr4or5: 1st address in the ae header, which may correspond to address 4
* (if addr6 is NULL) or address 5 (if addr6 is present). It may
* be NULL.
* @addr6: 2nd address in the ae header, which corresponds to addr6 of the
* mesh frame
*
* Return the header length.
*/
int ieee80211_new_mesh_header(struct ieee80211_sub_if_data *sdata,
struct ieee80211s_hdr *meshhdr,
const char *addr4or5, const char *addr6)
{
if (WARN_ON(!addr4or5 && addr6))
return 0;
memset(meshhdr, 0, sizeof(*meshhdr));
meshhdr->ttl = sdata->u.mesh.mshcfg.dot11MeshTTL;
/* FIXME: racy -- TX on multiple queues can be concurrent */
put_unaligned(cpu_to_le32(sdata->u.mesh.mesh_seqnum), &meshhdr->seqnum);
sdata->u.mesh.mesh_seqnum++;
if (addr4or5 && !addr6) {
meshhdr->flags |= MESH_FLAGS_AE_A4;
memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
return 2 * ETH_ALEN;
} else if (addr4or5 && addr6) {
meshhdr->flags |= MESH_FLAGS_AE_A5_A6;
memcpy(meshhdr->eaddr1, addr4or5, ETH_ALEN);
memcpy(meshhdr->eaddr2, addr6, ETH_ALEN);
return 3 * ETH_ALEN;
}
return ETH_ALEN;
}
static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
u32 changed;
if (ifmsh->mshcfg.plink_timeout > 0)
ieee80211_sta_expire(sdata, ifmsh->mshcfg.plink_timeout * HZ);
mesh_path_expire(sdata);
changed = mesh_accept_plinks_update(sdata);
ieee80211_mbss_info_change_notify(sdata, changed);
mod_timer(&ifmsh->housekeeping_timer,
round_jiffies(jiffies +
IEEE80211_MESH_HOUSEKEEPING_INTERVAL));
}
static void ieee80211_mesh_rootpath(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
u32 interval;
mesh_path_tx_root_frame(sdata);
if (ifmsh->mshcfg.dot11MeshHWMPRootMode == IEEE80211_PROACTIVE_RANN)
interval = ifmsh->mshcfg.dot11MeshHWMPRannInterval;
else
interval = ifmsh->mshcfg.dot11MeshHWMProotInterval;
mod_timer(&ifmsh->mesh_path_root_timer,
round_jiffies(TU_TO_EXP_TIME(interval)));
}
static int
ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh)
{
struct beacon_data *bcn;
int head_len, tail_len;
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
struct ieee80211_chanctx_conf *chanctx_conf;
struct mesh_csa_settings *csa;
enum ieee80211_band band;
u8 *pos;
struct ieee80211_sub_if_data *sdata;
int hdr_len = offsetof(struct ieee80211_mgmt, u.beacon) +
sizeof(mgmt->u.beacon);
sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh);
rcu_read_lock();
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
band = chanctx_conf->def.chan->band;
rcu_read_unlock();
head_len = hdr_len +
2 + /* NULL SSID */
/* Channel Switch Announcement */
2 + sizeof(struct ieee80211_channel_sw_ie) +
/* Mesh Channel Swith Parameters */
2 + sizeof(struct ieee80211_mesh_chansw_params_ie) +
2 + 8 + /* supported rates */
2 + 3; /* DS params */
tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) +
2 + sizeof(struct ieee80211_ht_cap) +
2 + sizeof(struct ieee80211_ht_operation) +
2 + ifmsh->mesh_id_len +
2 + sizeof(struct ieee80211_meshconf_ie) +
2 + sizeof(__le16) + /* awake window */
2 + sizeof(struct ieee80211_vht_cap) +
2 + sizeof(struct ieee80211_vht_operation) +
ifmsh->ie_len;
bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL);
/* need an skb for IE builders to operate on */
skb = dev_alloc_skb(max(head_len, tail_len));
if (!bcn || !skb)
goto out_free;
/*
* pointers go into the block we allocated,
* memory is | beacon_data | head | tail |
*/
bcn->head = ((u8 *) bcn) + sizeof(*bcn);
/* fill in the head */
mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len);
memset(mgmt, 0, hdr_len);
mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_BEACON);
eth_broadcast_addr(mgmt->da);
memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN);
ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt);
mgmt->u.beacon.beacon_int =
cpu_to_le16(sdata->vif.bss_conf.beacon_int);
mgmt->u.beacon.capab_info |= cpu_to_le16(
sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0);
pos = skb_put(skb, 2);
*pos++ = WLAN_EID_SSID;
*pos++ = 0x0;
rcu_read_lock();
csa = rcu_dereference(ifmsh->csa);
if (csa) {
pos = skb_put(skb, 13);
memset(pos, 0, 13);
*pos++ = WLAN_EID_CHANNEL_SWITCH;
*pos++ = 3;
*pos++ = 0x0;
*pos++ = ieee80211_frequency_to_channel(
csa->settings.chandef.chan->center_freq);
bcn->csa_current_counter = csa->settings.count;
bcn->csa_counter_offsets[0] = hdr_len + 6;
*pos++ = csa->settings.count;
*pos++ = WLAN_EID_CHAN_SWITCH_PARAM;
*pos++ = 6;
if (ifmsh->csa_role == IEEE80211_MESH_CSA_ROLE_INIT) {
*pos++ = ifmsh->mshcfg.dot11MeshTTL;
*pos |= WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
} else {
*pos++ = ifmsh->chsw_ttl;
}
*pos++ |= csa->settings.block_tx ?
WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT : 0x00;
put_unaligned_le16(WLAN_REASON_MESH_CHAN, pos);
pos += 2;
put_unaligned_le16(ifmsh->pre_value, pos);
pos += 2;
}
rcu_read_unlock();
if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
mesh_add_ds_params_ie(sdata, skb))
goto out_free;
bcn->head_len = skb->len;
memcpy(bcn->head, skb->data, bcn->head_len);
/* now the tail */
skb_trim(skb, 0);
bcn->tail = bcn->head + bcn->head_len;
if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) ||
mesh_add_rsn_ie(sdata, skb) ||
mesh_add_ht_cap_ie(sdata, skb) ||
mesh_add_ht_oper_ie(sdata, skb) ||
mesh_add_meshid_ie(sdata, skb) ||
mesh_add_meshconf_ie(sdata, skb) ||
mesh_add_awake_window_ie(sdata, skb) ||
mesh_add_vht_cap_ie(sdata, skb) ||
mesh_add_vht_oper_ie(sdata, skb) ||
mesh_add_vendor_ies(sdata, skb))
goto out_free;
bcn->tail_len = skb->len;
memcpy(bcn->tail, skb->data, bcn->tail_len);
bcn->meshconf = (struct ieee80211_meshconf_ie *)
(bcn->tail + ifmsh->meshconf_offset);
dev_kfree_skb(skb);
rcu_assign_pointer(ifmsh->beacon, bcn);
return 0;
out_free:
kfree(bcn);
dev_kfree_skb(skb);
return -ENOMEM;
}
static int
ieee80211_mesh_rebuild_beacon(struct ieee80211_sub_if_data *sdata)
{
struct beacon_data *old_bcn;
int ret;
old_bcn = rcu_dereference_protected(sdata->u.mesh.beacon,
lockdep_is_held(&sdata->wdev.mtx));
ret = ieee80211_mesh_build_beacon(&sdata->u.mesh);
if (ret)
/* just reuse old beacon */
return ret;
if (old_bcn)
kfree_rcu(old_bcn, rcu_head);
return 0;
}
void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata,
u32 changed)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
unsigned long bits = changed;
u32 bit;
if (!bits)
return;
/* if we race with running work, worst case this work becomes a noop */
for_each_set_bit(bit, &bits, sizeof(changed) * BITS_PER_BYTE)
set_bit(bit, &ifmsh->mbss_changed);
set_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags);
ieee80211_queue_work(&sdata->local->hw, &sdata->work);
}
int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct ieee80211_local *local = sdata->local;
u32 changed = BSS_CHANGED_BEACON |
BSS_CHANGED_BEACON_ENABLED |
BSS_CHANGED_HT |
BSS_CHANGED_BASIC_RATES |
BSS_CHANGED_BEACON_INT;
local->fif_other_bss++;
/* mesh ifaces must set allmulti to forward mcast traffic */
atomic_inc(&local->iff_allmultis);
ieee80211_configure_filter(local);
ifmsh->mesh_cc_id = 0; /* Disabled */
/* register sync ops from extensible synchronization framework */
ifmsh->sync_ops = ieee80211_mesh_sync_ops_get(ifmsh->mesh_sp_id);
ifmsh->adjusting_tbtt = false;
ifmsh->sync_offset_clockdrift_max = 0;
set_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags);
ieee80211_mesh_root_setup(ifmsh);
ieee80211_queue_work(&local->hw, &sdata->work);
sdata->vif.bss_conf.ht_operation_mode =
ifmsh->mshcfg.ht_opmode;
sdata->vif.bss_conf.enable_beacon = true;
changed |= ieee80211_mps_local_status_update(sdata);
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31 01:14:08 +08:00
if (ieee80211_mesh_build_beacon(ifmsh)) {
ieee80211_stop_mesh(sdata);
return -ENOMEM;
}
ieee80211_recalc_dtim(local, sdata);
ieee80211_bss_info_change_notify(sdata, changed);
netif_carrier_on(sdata->dev);
return 0;
}
void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct beacon_data *bcn;
netif_carrier_off(sdata->dev);
/* stop the beacon */
ifmsh->mesh_id_len = 0;
sdata->vif.bss_conf.enable_beacon = false;
clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state);
ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED);
bcn = rcu_dereference_protected(ifmsh->beacon,
lockdep_is_held(&sdata->wdev.mtx));
RCU_INIT_POINTER(ifmsh->beacon, NULL);
kfree_rcu(bcn, rcu_head);
/* flush STAs and mpaths on this iface */
sta_info_flush(sdata);
mesh_path_flush_by_iface(sdata);
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31 01:14:08 +08:00
/* free all potentially still buffered group-addressed frames */
local->total_ps_buffered -= skb_queue_len(&ifmsh->ps.bc_buf);
skb_queue_purge(&ifmsh->ps.bc_buf);
del_timer_sync(&sdata->u.mesh.housekeeping_timer);
del_timer_sync(&sdata->u.mesh.mesh_path_root_timer);
del_timer_sync(&sdata->u.mesh.mesh_path_timer);
/* clear any mesh work (for next join) we may have accrued */
ifmsh->wrkq_flags = 0;
ifmsh->mbss_changed = 0;
local->fif_other_bss--;
atomic_dec(&local->iff_allmultis);
ieee80211_configure_filter(local);
}
static bool
ieee80211_mesh_process_chnswitch(struct ieee80211_sub_if_data *sdata,
struct ieee802_11_elems *elems, bool beacon)
{
struct cfg80211_csa_settings params;
struct ieee80211_csa_ie csa_ie;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
enum ieee80211_band band = ieee80211_get_sdata_band(sdata);
int err;
u32 sta_flags;
sdata_assert_lock(sdata);
sta_flags = IEEE80211_STA_DISABLE_VHT;
switch (sdata->vif.bss_conf.chandef.width) {
case NL80211_CHAN_WIDTH_20_NOHT:
sta_flags |= IEEE80211_STA_DISABLE_HT;
case NL80211_CHAN_WIDTH_20:
sta_flags |= IEEE80211_STA_DISABLE_40MHZ;
break;
default:
break;
}
memset(&params, 0, sizeof(params));
memset(&csa_ie, 0, sizeof(csa_ie));
err = ieee80211_parse_ch_switch_ie(sdata, elems, band,
sta_flags, sdata->vif.addr,
&csa_ie);
if (err < 0)
return false;
if (err)
return false;
params.chandef = csa_ie.chandef;
params.count = csa_ie.count;
if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, &params.chandef,
IEEE80211_CHAN_DISABLED)) {
sdata_info(sdata,
"mesh STA %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), aborting\n",
sdata->vif.addr,
params.chandef.chan->center_freq,
params.chandef.width,
params.chandef.center_freq1,
params.chandef.center_freq2);
return false;
}
err = cfg80211_chandef_dfs_required(sdata->local->hw.wiphy,
&params.chandef,
NL80211_IFTYPE_MESH_POINT);
if (err < 0)
return false;
if (err > 0)
/* TODO: DFS not (yet) supported */
return false;
params.radar_required = err;
if (cfg80211_chandef_identical(&params.chandef,
&sdata->vif.bss_conf.chandef)) {
mcsa_dbg(sdata,
"received csa with an identical chandef, ignoring\n");
return true;
}
mcsa_dbg(sdata,
"received channel switch announcement to go to channel %d MHz\n",
params.chandef.chan->center_freq);
params.block_tx = csa_ie.mode & WLAN_EID_CHAN_SWITCH_PARAM_TX_RESTRICT;
if (beacon) {
ifmsh->chsw_ttl = csa_ie.ttl - 1;
if (ifmsh->pre_value >= csa_ie.pre_value)
return false;
ifmsh->pre_value = csa_ie.pre_value;
}
if (ifmsh->chsw_ttl >= ifmsh->mshcfg.dot11MeshTTL)
return false;
ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_REPEATER;
if (ieee80211_channel_switch(sdata->local->hw.wiphy, sdata->dev,
&params) < 0)
return false;
return true;
}
static void
ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, size_t len)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct sk_buff *presp;
struct beacon_data *bcn;
struct ieee80211_mgmt *hdr;
struct ieee802_11_elems elems;
size_t baselen;
u8 *pos;
pos = mgmt->u.probe_req.variable;
baselen = (u8 *) pos - (u8 *) mgmt;
if (baselen > len)
return;
ieee802_11_parse_elems(pos, len - baselen, false, &elems);
if (!elems.mesh_id)
return;
/* 802.11-2012 10.1.4.3.2 */
if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) &&
!is_broadcast_ether_addr(mgmt->da)) ||
elems.ssid_len != 0)
return;
if (elems.mesh_id_len != 0 &&
(elems.mesh_id_len != ifmsh->mesh_id_len ||
memcmp(elems.mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len)))
return;
rcu_read_lock();
bcn = rcu_dereference(ifmsh->beacon);
if (!bcn)
goto out;
presp = dev_alloc_skb(local->tx_headroom +
bcn->head_len + bcn->tail_len);
if (!presp)
goto out;
skb_reserve(presp, local->tx_headroom);
memcpy(skb_put(presp, bcn->head_len), bcn->head, bcn->head_len);
memcpy(skb_put(presp, bcn->tail_len), bcn->tail, bcn->tail_len);
hdr = (struct ieee80211_mgmt *) presp->data;
hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
IEEE80211_STYPE_PROBE_RESP);
memcpy(hdr->da, mgmt->sa, ETH_ALEN);
IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
ieee80211_tx_skb(sdata, presp);
out:
rcu_read_unlock();
}
static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
u16 stype,
struct ieee80211_mgmt *mgmt,
size_t len,
struct ieee80211_rx_status *rx_status)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct ieee802_11_elems elems;
struct ieee80211_channel *channel;
size_t baselen;
int freq;
enum ieee80211_band band = rx_status->band;
/* ignore ProbeResp to foreign address */
if (stype == IEEE80211_STYPE_PROBE_RESP &&
!ether_addr_equal(mgmt->da, sdata->vif.addr))
return;
baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
if (baselen > len)
return;
ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
false, &elems);
/* ignore non-mesh or secure / unsecure mismatch */
if ((!elems.mesh_id || !elems.mesh_config) ||
(elems.rsn && sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) ||
(!elems.rsn && sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE))
return;
if (elems.ds_params)
freq = ieee80211_channel_to_frequency(elems.ds_params[0], band);
else
freq = rx_status->freq;
channel = ieee80211_get_channel(local->hw.wiphy, freq);
if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
return;
if (mesh_matches_local(sdata, &elems))
mesh_neighbour_update(sdata, mgmt->sa, &elems);
if (ifmsh->sync_ops)
ifmsh->sync_ops->rx_bcn_presp(sdata,
stype, mgmt, &elems, rx_status);
if (ifmsh->csa_role != IEEE80211_MESH_CSA_ROLE_INIT &&
!sdata->vif.csa_active)
ieee80211_mesh_process_chnswitch(sdata, &elems, true);
}
int ieee80211_mesh_finish_csa(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct mesh_csa_settings *tmp_csa_settings;
int ret = 0;
int changed = 0;
/* Reset the TTL value and Initiator flag */
ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
ifmsh->chsw_ttl = 0;
/* Remove the CSA and MCSP elements from the beacon */
tmp_csa_settings = rcu_dereference(ifmsh->csa);
RCU_INIT_POINTER(ifmsh->csa, NULL);
if (tmp_csa_settings)
kfree_rcu(tmp_csa_settings, rcu_head);
ret = ieee80211_mesh_rebuild_beacon(sdata);
if (ret)
return -EINVAL;
changed |= BSS_CHANGED_BEACON;
mcsa_dbg(sdata, "complete switching to center freq %d MHz",
sdata->vif.bss_conf.chandef.chan->center_freq);
return changed;
}
int ieee80211_mesh_csa_beacon(struct ieee80211_sub_if_data *sdata,
struct cfg80211_csa_settings *csa_settings)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct mesh_csa_settings *tmp_csa_settings;
int ret = 0;
tmp_csa_settings = kmalloc(sizeof(*tmp_csa_settings),
GFP_ATOMIC);
if (!tmp_csa_settings)
return -ENOMEM;
memcpy(&tmp_csa_settings->settings, csa_settings,
sizeof(struct cfg80211_csa_settings));
rcu_assign_pointer(ifmsh->csa, tmp_csa_settings);
ret = ieee80211_mesh_rebuild_beacon(sdata);
if (ret) {
tmp_csa_settings = rcu_dereference(ifmsh->csa);
RCU_INIT_POINTER(ifmsh->csa, NULL);
kfree_rcu(tmp_csa_settings, rcu_head);
return ret;
}
return BSS_CHANGED_BEACON;
}
static int mesh_fwd_csa_frame(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, size_t len)
{
struct ieee80211_mgmt *mgmt_fwd;
struct sk_buff *skb;
struct ieee80211_local *local = sdata->local;
u8 *pos = mgmt->u.action.u.chan_switch.variable;
size_t offset_ttl;
skb = dev_alloc_skb(local->tx_headroom + len);
if (!skb)
return -ENOMEM;
skb_reserve(skb, local->tx_headroom);
mgmt_fwd = (struct ieee80211_mgmt *) skb_put(skb, len);
/* offset_ttl is based on whether the secondary channel
* offset is available or not. Subtract 1 from the mesh TTL
* and disable the initiator flag before forwarding.
*/
offset_ttl = (len < 42) ? 7 : 10;
*(pos + offset_ttl) -= 1;
*(pos + offset_ttl + 1) &= ~WLAN_EID_CHAN_SWITCH_PARAM_INITIATOR;
memcpy(mgmt_fwd, mgmt, len);
eth_broadcast_addr(mgmt_fwd->da);
memcpy(mgmt_fwd->sa, sdata->vif.addr, ETH_ALEN);
memcpy(mgmt_fwd->bssid, sdata->vif.addr, ETH_ALEN);
ieee80211_tx_skb(sdata, skb);
return 0;
}
static void mesh_rx_csa_frame(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt, size_t len)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
struct ieee802_11_elems elems;
u16 pre_value;
bool fwd_csa = true;
size_t baselen;
u8 *pos;
if (mgmt->u.action.u.measurement.action_code !=
WLAN_ACTION_SPCT_CHL_SWITCH)
return;
pos = mgmt->u.action.u.chan_switch.variable;
baselen = offsetof(struct ieee80211_mgmt,
u.action.u.chan_switch.variable);
ieee802_11_parse_elems(pos, len - baselen, false, &elems);
ifmsh->chsw_ttl = elems.mesh_chansw_params_ie->mesh_ttl;
if (!--ifmsh->chsw_ttl)
fwd_csa = false;
pre_value = le16_to_cpu(elems.mesh_chansw_params_ie->mesh_pre_value);
if (ifmsh->pre_value >= pre_value)
return;
ifmsh->pre_value = pre_value;
if (!sdata->vif.csa_active &&
!ieee80211_mesh_process_chnswitch(sdata, &elems, false)) {
mcsa_dbg(sdata, "Failed to process CSA action frame");
return;
}
/* forward or re-broadcast the CSA frame */
if (fwd_csa) {
if (mesh_fwd_csa_frame(sdata, mgmt, len) < 0)
mcsa_dbg(sdata, "Failed to forward the CSA frame");
}
}
static void ieee80211_mesh_rx_mgmt_action(struct ieee80211_sub_if_data *sdata,
struct ieee80211_mgmt *mgmt,
size_t len,
struct ieee80211_rx_status *rx_status)
{
switch (mgmt->u.action.category) {
case WLAN_CATEGORY_SELF_PROTECTED:
switch (mgmt->u.action.u.self_prot.action_code) {
case WLAN_SP_MESH_PEERING_OPEN:
case WLAN_SP_MESH_PEERING_CLOSE:
case WLAN_SP_MESH_PEERING_CONFIRM:
mesh_rx_plink_frame(sdata, mgmt, len, rx_status);
break;
}
break;
case WLAN_CATEGORY_MESH_ACTION:
if (mesh_action_is_path_sel(mgmt))
mesh_rx_path_sel_frame(sdata, mgmt, len);
break;
case WLAN_CATEGORY_SPECTRUM_MGMT:
mesh_rx_csa_frame(sdata, mgmt, len);
break;
}
}
void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
struct sk_buff *skb)
{
struct ieee80211_rx_status *rx_status;
struct ieee80211_mgmt *mgmt;
u16 stype;
sdata_lock(sdata);
/* mesh already went down */
if (!sdata->u.mesh.mesh_id_len)
goto out;
rx_status = IEEE80211_SKB_RXCB(skb);
mgmt = (struct ieee80211_mgmt *) skb->data;
stype = le16_to_cpu(mgmt->frame_control) & IEEE80211_FCTL_STYPE;
switch (stype) {
case IEEE80211_STYPE_PROBE_RESP:
case IEEE80211_STYPE_BEACON:
ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len,
rx_status);
break;
case IEEE80211_STYPE_PROBE_REQ:
ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len);
break;
case IEEE80211_STYPE_ACTION:
ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status);
break;
}
out:
sdata_unlock(sdata);
}
static void mesh_bss_info_changed(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
u32 bit, changed = 0;
for_each_set_bit(bit, &ifmsh->mbss_changed,
sizeof(changed) * BITS_PER_BYTE) {
clear_bit(bit, &ifmsh->mbss_changed);
changed |= BIT(bit);
}
if (sdata->vif.bss_conf.enable_beacon &&
(changed & (BSS_CHANGED_BEACON |
BSS_CHANGED_HT |
BSS_CHANGED_BASIC_RATES |
BSS_CHANGED_BEACON_INT)))
if (ieee80211_mesh_rebuild_beacon(sdata))
return;
ieee80211_bss_info_change_notify(sdata, changed);
}
void ieee80211_mesh_work(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
sdata_lock(sdata);
/* mesh already went down */
if (!sdata->u.mesh.mesh_id_len)
goto out;
if (ifmsh->preq_queue_len &&
time_after(jiffies,
ifmsh->last_preq + msecs_to_jiffies(ifmsh->mshcfg.dot11MeshHWMPpreqMinInterval)))
mesh_path_start_discovery(sdata);
if (test_and_clear_bit(MESH_WORK_GROW_MPATH_TABLE, &ifmsh->wrkq_flags))
mesh_mpath_table_grow();
if (test_and_clear_bit(MESH_WORK_GROW_MPP_TABLE, &ifmsh->wrkq_flags))
mesh_mpp_table_grow();
if (test_and_clear_bit(MESH_WORK_HOUSEKEEPING, &ifmsh->wrkq_flags))
ieee80211_mesh_housekeeping(sdata);
if (test_and_clear_bit(MESH_WORK_ROOT, &ifmsh->wrkq_flags))
ieee80211_mesh_rootpath(sdata);
if (test_and_clear_bit(MESH_WORK_DRIFT_ADJUST, &ifmsh->wrkq_flags))
mesh_sync_adjust_tbtt(sdata);
if (test_and_clear_bit(MESH_WORK_MBSS_CHANGED, &ifmsh->wrkq_flags))
mesh_bss_info_changed(sdata);
out:
sdata_unlock(sdata);
}
void ieee80211_mesh_notify_scan_completed(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list)
if (ieee80211_vif_is_mesh(&sdata->vif) &&
ieee80211_sdata_running(sdata))
ieee80211_queue_work(&local->hw, &sdata->work);
rcu_read_unlock();
}
void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
{
struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
static u8 zero_addr[ETH_ALEN] = {};
setup_timer(&ifmsh->housekeeping_timer,
ieee80211_mesh_housekeeping_timer,
(unsigned long) sdata);
ifmsh->accepting_plinks = true;
atomic_set(&ifmsh->mpaths, 0);
mesh_rmc_init(sdata);
ifmsh->last_preq = jiffies;
ifmsh->next_perr = jiffies;
ifmsh->csa_role = IEEE80211_MESH_CSA_ROLE_NONE;
/* Allocate all mesh structures when creating the first mesh interface. */
if (!mesh_allocated)
ieee80211s_init();
setup_timer(&ifmsh->mesh_path_timer,
ieee80211_mesh_path_timer,
(unsigned long) sdata);
setup_timer(&ifmsh->mesh_path_root_timer,
ieee80211_mesh_path_root_timer,
(unsigned long) sdata);
INIT_LIST_HEAD(&ifmsh->preq_queue.list);
mac80211: mesh power save basics Add routines to - maintain a PS mode for each peer and a non-peer PS mode - indicate own PS mode in transmitted frames - track neighbor STAs power modes - buffer frames when neighbors are in PS mode - add TIM and Awake Window IE to beacons - release frames in Mesh Peer Service Periods Add local_pm to sta_info to represent the link-specific power mode at this station towards the remote station. When a peer link is established, use the default power mode stored in mesh config. Update the PS status if the peering status of a neighbor changes. Maintain a mesh power mode for non-peer mesh STAs. Set the non-peer power mode to active mode during peering. Authenticated mesh peering is currently not working when either node is configured to be in power save mode. Indicate the current power mode in transmitted frames. Use QoS Nulls to indicate mesh power mode transitions. For performance reasons, calls to the function setting the frame flags are placed in HWMP routing routines, as there the STA pointer is already available. Add peer_pm to sta_info to represent the peer's link-specific power mode towards the local station. Add nonpeer_pm to represent the peer's power mode towards all non-peer stations. Track power modes based on received frames. Add the ps_data structure to ieee80211_if_mesh (for TIM map, PS neighbor counter and group-addressed frame buffer). Set WLAN_STA_PS flag for STA in PS mode to use the unicast frame buffering routines in the tx path. Update num_sta_ps to buffer and release group-addressed frames after DTIM beacons. Announce the awake window duration in beacons if in light or deep sleep mode towards any peer or non-peer. Create a TIM IE similarly to AP mode and add it to mesh beacons. Parse received Awake Window IEs and check TIM IEs for buffered frames. Release frames towards peers in mesh Peer Service Periods. Use the corresponding trigger frames and monitor the MPSP status. Append a QoS Null as trigger frame if neccessary to properly end the MPSP. Currently, in HT channels MPSPs behave imperfectly and show large delay spikes and frame losses. Signed-off-by: Marco Porsch <marco@cozybit.com> Signed-off-by: Ivan Bezyazychnyy <ivan.bezyazychnyy@gmail.com> Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-31 01:14:08 +08:00
skb_queue_head_init(&ifmsh->ps.bc_buf);
spin_lock_init(&ifmsh->mesh_preq_queue_lock);
spin_lock_init(&ifmsh->sync_offset_lock);
RCU_INIT_POINTER(ifmsh->beacon, NULL);
sdata->vif.bss_conf.bssid = zero_addr;
}