UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/net/ipv6/mcast_snoop.c

191 lines
4.4 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 343 Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of version 2 of the gnu general public license as published by the free software foundation this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000437.338011816@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 07:57:57 +08:00
// SPDX-License-Identifier: GPL-2.0-only
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
/* Copyright (C) 2010: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
* Copyright (C) 2015: Linus Lüssing <linus.luessing@c0d3.blue>
*
* Based on the MLD support added to br_multicast.c by YOSHIFUJI Hideaki.
*/
#include <linux/skbuff.h>
#include <net/ipv6.h>
#include <net/mld.h>
#include <net/addrconf.h>
#include <net/ip6_checksum.h>
static int ipv6_mc_check_ip6hdr(struct sk_buff *skb)
{
const struct ipv6hdr *ip6h;
unsigned int len;
unsigned int offset = skb_network_offset(skb) + sizeof(*ip6h);
if (!pskb_may_pull(skb, offset))
return -EINVAL;
ip6h = ipv6_hdr(skb);
if (ip6h->version != 6)
return -EINVAL;
len = offset + ntohs(ip6h->payload_len);
if (skb->len < len || len <= offset)
return -EINVAL;
bridge: Snoop Multicast Router Advertisements When multiple multicast routers are present in a broadcast domain then only one of them will be detectable via IGMP/MLD query snooping. The multicast router with the lowest IP address will become the selected and active querier while all other multicast routers will then refrain from sending queries. To detect such rather silent multicast routers, too, RFC4286 ("Multicast Router Discovery") provides a standardized protocol to detect multicast routers for multicast snooping switches. This patch implements the necessary MRD Advertisement message parsing and after successful processing adds such routers to the internal multicast router list. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:28 +08:00
skb_set_transport_header(skb, offset);
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
return 0;
}
static int ipv6_mc_check_exthdrs(struct sk_buff *skb)
{
const struct ipv6hdr *ip6h;
net: fix two sparse warnings introduced by IGMP/MLD parsing exports > net/core/skbuff.c:4108:13: sparse: incorrect type in assignment (different base types) > net/ipv6/mcast_snoop.c:63 ipv6_mc_check_exthdrs() warn: unsigned 'offset' is never less than zero. Introduced by 9afd85c9e4552b276e2f4cfefd622bdeeffbbf26 ("net: Export IGMP/MLD message validation code") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-05 06:19:35 +08:00
int offset;
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
u8 nexthdr;
__be16 frag_off;
ip6h = ipv6_hdr(skb);
if (ip6h->nexthdr != IPPROTO_HOPOPTS)
return -ENOMSG;
nexthdr = ip6h->nexthdr;
offset = skb_network_offset(skb) + sizeof(*ip6h);
offset = ipv6_skip_exthdr(skb, offset, &nexthdr, &frag_off);
if (offset < 0)
return -EINVAL;
if (nexthdr != IPPROTO_ICMPV6)
return -ENOMSG;
skb_set_transport_header(skb, offset);
return 0;
}
static int ipv6_mc_check_mld_reportv2(struct sk_buff *skb)
{
unsigned int len = skb_transport_offset(skb);
len += sizeof(struct mld2_report);
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
return ipv6_mc_may_pull(skb, len) ? 0 : -EINVAL;
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
}
static int ipv6_mc_check_mld_query(struct sk_buff *skb)
{
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
unsigned int transport_len = ipv6_transport_len(skb);
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
struct mld_msg *mld;
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
unsigned int len;
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
/* RFC2710+RFC3810 (MLDv1+MLDv2) require link-local source addresses */
if (!(ipv6_addr_type(&ipv6_hdr(skb)->saddr) & IPV6_ADDR_LINKLOCAL))
return -EINVAL;
/* MLDv1? */
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
if (transport_len != sizeof(struct mld_msg)) {
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
/* or MLDv2? */
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
if (transport_len < sizeof(struct mld2_query))
return -EINVAL;
len = skb_transport_offset(skb) + sizeof(struct mld2_query);
if (!ipv6_mc_may_pull(skb, len))
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
return -EINVAL;
}
mld = (struct mld_msg *)skb_transport_header(skb);
/* RFC2710+RFC3810 (MLDv1+MLDv2) require the multicast link layer
* all-nodes destination address (ff02::1) for general queries
*/
if (ipv6_addr_any(&mld->mld_mca) &&
!ipv6_addr_is_ll_all_nodes(&ipv6_hdr(skb)->daddr))
return -EINVAL;
return 0;
}
static int ipv6_mc_check_mld_msg(struct sk_buff *skb)
{
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
unsigned int len = skb_transport_offset(skb) + sizeof(struct mld_msg);
struct mld_msg *mld;
if (!ipv6_mc_may_pull(skb, len))
net: bridge: mcast: fix broken length + header check for MRDv6 Adv. The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25 23:27:35 +08:00
return -ENODATA;
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
mld = (struct mld_msg *)skb_transport_header(skb);
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
switch (mld->mld_type) {
case ICMPV6_MGM_REDUCTION:
case ICMPV6_MGM_REPORT:
return 0;
case ICMPV6_MLD2_REPORT:
return ipv6_mc_check_mld_reportv2(skb);
case ICMPV6_MGM_QUERY:
return ipv6_mc_check_mld_query(skb);
default:
net: bridge: mcast: fix broken length + header check for MRDv6 Adv. The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25 23:27:35 +08:00
return -ENODATA;
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
}
}
static inline __sum16 ipv6_mc_validate_checksum(struct sk_buff *skb)
{
return skb_checksum_validate(skb, IPPROTO_ICMPV6, ip6_compute_pseudo);
}
net: bridge: mcast: fix broken length + header check for MRDv6 Adv. The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25 23:27:35 +08:00
static int ipv6_mc_check_icmpv6(struct sk_buff *skb)
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
{
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
unsigned int len = skb_transport_offset(skb) + sizeof(struct icmp6hdr);
unsigned int transport_len = ipv6_transport_len(skb);
struct sk_buff *skb_chk;
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
if (!ipv6_mc_may_pull(skb, len))
return -EINVAL;
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
skb_chk = skb_checksum_trimmed(skb, transport_len,
ipv6_mc_validate_checksum);
if (!skb_chk)
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
return -EINVAL;
net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code The recent refactoring of the IGMP and MLD parsing code into ipv6_mc_check_mld() / ip_mc_check_igmp() introduced a potential crash / BUG() invocation for bridges: I wrongly assumed that skb_get() could be used as a simple reference counter for an skb which is not the case. skb_get() bears additional semantics, a user count. This leads to a BUG() invocation in pskb_expand_head() / kernel panic if pskb_may_pull() is called on an skb with a user count greater than one - unfortunately the refactoring did just that. Fixing this by removing the skb_get() call and changing the API: The caller of ipv6_mc_check_mld() / ip_mc_check_igmp() now needs to additionally check whether the returned skb_trimmed is a clone. Fixes: 9afd85c9e455 ("net: Export IGMP/MLD message validation code") Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 11:54:07 +08:00
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
if (skb_chk != skb)
net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code The recent refactoring of the IGMP and MLD parsing code into ipv6_mc_check_mld() / ip_mc_check_igmp() introduced a potential crash / BUG() invocation for bridges: I wrongly assumed that skb_get() could be used as a simple reference counter for an skb which is not the case. skb_get() bears additional semantics, a user count. This leads to a BUG() invocation in pskb_expand_head() / kernel panic if pskb_may_pull() is called on an skb with a user count greater than one - unfortunately the refactoring did just that. Fixing this by removing the skb_get() call and changing the API: The caller of ipv6_mc_check_mld() / ip_mc_check_igmp() now needs to additionally check whether the returned skb_trimmed is a clone. Fixes: 9afd85c9e455 ("net: Export IGMP/MLD message validation code") Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 11:54:07 +08:00
kfree_skb(skb_chk);
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
return 0;
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
}
/**
* ipv6_mc_check_mld - checks whether this is a sane MLD packet
* @skb: the skb to validate
*
* Checks whether an IPv6 packet is a valid MLD packet. If so sets
net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code The recent refactoring of the IGMP and MLD parsing code into ipv6_mc_check_mld() / ip_mc_check_igmp() introduced a potential crash / BUG() invocation for bridges: I wrongly assumed that skb_get() could be used as a simple reference counter for an skb which is not the case. skb_get() bears additional semantics, a user count. This leads to a BUG() invocation in pskb_expand_head() / kernel panic if pskb_may_pull() is called on an skb with a user count greater than one - unfortunately the refactoring did just that. Fixing this by removing the skb_get() call and changing the API: The caller of ipv6_mc_check_mld() / ip_mc_check_igmp() now needs to additionally check whether the returned skb_trimmed is a clone. Fixes: 9afd85c9e455 ("net: Export IGMP/MLD message validation code") Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 11:54:07 +08:00
* skb transport header accordingly and returns zero.
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
*
* -EINVAL: A broken packet was detected, i.e. it violates some internet
* standard
net: bridge: mcast: fix broken length + header check for MRDv6 Adv. The IPv6 Multicast Router Advertisements parsing has the following two issues: For one thing, ICMPv6 MRD Advertisements are smaller than ICMPv6 MLD messages (ICMPv6 MRD Adv.: 8 bytes vs. ICMPv6 MLDv1/2: >= 24 bytes, assuming MLDv2 Reports with at least one multicast address entry). When ipv6_mc_check_mld_msg() tries to parse an Multicast Router Advertisement its MLD length check will fail - and it will wrongly return -EINVAL, even if we have a valid MRD Advertisement. With the returned -EINVAL the bridge code will assume a broken packet and will wrongly discard it, potentially leading to multicast packet loss towards multicast routers. The second issue is the MRD header parsing in br_ip6_multicast_mrd_rcv(): It wrongly checks for an ICMPv6 header immediately after the IPv6 header (IPv6 next header type). However according to RFC4286, section 2 all MRD messages contain a Router Alert option (just like MLD). So instead there is an IPv6 Hop-by-Hop option for the Router Alert between the IPv6 and ICMPv6 header, again leading to the bridge wrongly discarding Multicast Router Advertisements. To fix these two issues, introduce a new return value -ENODATA to ipv6_mc_check_mld() to indicate a valid ICMPv6 packet with a hop-by-hop option which is not an MLD but potentially an MRD packet. This also simplifies further parsing in the bridge code, as ipv6_mc_check_mld() already fully checks the ICMPv6 header and hop-by-hop option. These issues were found and fixed with the help of the mrdisc tool (https://github.com/troglobit/mrdisc). Fixes: 4b3087c7e37f ("bridge: Snoop Multicast Router Advertisements") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-25 23:27:35 +08:00
* -ENOMSG: IP header validation succeeded but it is not an ICMPv6 packet
* with a hop-by-hop option.
* -ENODATA: IP+ICMPv6 header with hop-by-hop option validation succeeded
* but it is not an MLD packet.
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
* -ENOMEM: A memory allocation failure happened.
*
net: fix wrong skb_get() usage / crash in IGMP/MLD parsing code The recent refactoring of the IGMP and MLD parsing code into ipv6_mc_check_mld() / ip_mc_check_igmp() introduced a potential crash / BUG() invocation for bridges: I wrongly assumed that skb_get() could be used as a simple reference counter for an skb which is not the case. skb_get() bears additional semantics, a user count. This leads to a BUG() invocation in pskb_expand_head() / kernel panic if pskb_may_pull() is called on an skb with a user count greater than one - unfortunately the refactoring did just that. Fixing this by removing the skb_get() call and changing the API: The caller of ipv6_mc_check_mld() / ip_mc_check_igmp() now needs to additionally check whether the returned skb_trimmed is a clone. Fixes: 9afd85c9e455 ("net: Export IGMP/MLD message validation code") Reported-by: Brenden Blanco <bblanco@plumgrid.com> Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13 11:54:07 +08:00
* Caller needs to set the skb network header and free any returned skb if it
* differs from the provided skb.
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
*/
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() calls This patch refactors ip_mc_check_igmp(), ipv6_mc_check_mld() and their callers (more precisely, the Linux bridge) to not rely on the skb_trimmed parameter anymore. An skb with its tail trimmed to the IP packet length was initially introduced for the following three reasons: 1) To be able to verify the ICMPv6 checksum. 2) To be able to distinguish the version of an IGMP or MLD query. They are distinguishable only by their size. 3) To avoid parsing data for an IGMPv3 or MLDv2 report that is beyond the IP packet but still within the skb. The first case still uses a cloned and potentially trimmed skb to verfiy. However, there is no need to propagate it to the caller. For the second and third case explicit IP packet length checks were added. This hopefully makes ip_mc_check_igmp() and ipv6_mc_check_mld() easier to read and verfiy, as well as easier to use. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:25 +08:00
int ipv6_mc_check_mld(struct sk_buff *skb)
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
{
int ret;
ret = ipv6_mc_check_ip6hdr(skb);
if (ret < 0)
return ret;
ret = ipv6_mc_check_exthdrs(skb);
if (ret < 0)
return ret;
bridge: simplify ip_mc_check_igmp() and ipv6_mc_check_mld() internals With this patch the internal use of the skb_trimmed is reduced to the ICMPv6/IGMP checksum verification. And for the length checks the newly introduced helper functions are used instead of calculating and checking with skb->len directly. These changes should hopefully make it easier to verify that length checks are performed properly. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-21 14:26:26 +08:00
ret = ipv6_mc_check_icmpv6(skb);
if (ret < 0)
return ret;
return ipv6_mc_check_mld_msg(skb);
net: Export IGMP/MLD message validation code With this patch, the IGMP and MLD message validation functions are moved from the bridge code to IPv4/IPv6 multicast files. Some small refactoring was done to enhance readibility and to iron out some differences in behaviour between the IGMP and MLD parsing code (e.g. the skb-cloning of MLD messages is now only done if necessary, just like the IGMP part always did). Finally, these IGMP and MLD message validation functions are exported so that not only the bridge can use it but batman-adv later, too. Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02 20:01:07 +08:00
}
EXPORT_SYMBOL(ipv6_mc_check_mld);