OpenCloudOS-Kernel/fs/xfs/libxfs/xfs_attr.c

1682 lines
42 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
* All Rights Reserved.
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_shared.h"
#include "xfs_format.h"
#include "xfs_log_format.h"
#include "xfs_trans_resv.h"
#include "xfs_mount.h"
#include "xfs_defer.h"
#include "xfs_da_format.h"
#include "xfs_da_btree.h"
#include "xfs_attr_sf.h"
#include "xfs_inode.h"
#include "xfs_trans.h"
#include "xfs_bmap.h"
#include "xfs_bmap_btree.h"
#include "xfs_attr.h"
#include "xfs_attr_leaf.h"
#include "xfs_attr_remote.h"
#include "xfs_quota.h"
#include "xfs_trans_space.h"
xfs: event tracing support Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-15 07:14:59 +08:00
#include "xfs_trace.h"
/*
* xfs_attr.c
*
* Provide the external interfaces to manage attribute lists.
*/
/*========================================================================
* Function prototypes for the kernel.
*========================================================================*/
/*
* Internal routines when attribute list fits inside the inode.
*/
STATIC int xfs_attr_shortform_addname(xfs_da_args_t *args);
/*
* Internal routines when attribute list is one block.
*/
STATIC int xfs_attr_leaf_get(xfs_da_args_t *args);
STATIC int xfs_attr_leaf_removename(xfs_da_args_t *args);
STATIC int xfs_attr_leaf_hasname(struct xfs_da_args *args, struct xfs_buf **bp);
STATIC int xfs_attr_leaf_try_add(struct xfs_da_args *args, struct xfs_buf *bp);
/*
* Internal routines when attribute list is more than one block.
*/
STATIC int xfs_attr_node_get(xfs_da_args_t *args);
STATIC void xfs_attr_restore_rmt_blk(struct xfs_da_args *args);
STATIC int xfs_attr_node_addname(struct xfs_delattr_context *dac);
STATIC int xfs_attr_node_addname_find_attr(struct xfs_delattr_context *dac);
STATIC int xfs_attr_node_addname_clear_incomplete(
struct xfs_delattr_context *dac);
STATIC int xfs_attr_node_hasname(xfs_da_args_t *args,
struct xfs_da_state **state);
STATIC int xfs_attr_fillstate(xfs_da_state_t *state);
STATIC int xfs_attr_refillstate(xfs_da_state_t *state);
STATIC int xfs_attr_set_iter(struct xfs_delattr_context *dac,
struct xfs_buf **leaf_bp);
STATIC int xfs_attr_node_removename(struct xfs_da_args *args,
struct xfs_da_state *state);
int
xfs_inode_hasattr(
struct xfs_inode *ip)
{
if (!XFS_IFORK_Q(ip) ||
(ip->i_afp->if_format == XFS_DINODE_FMT_EXTENTS &&
ip->i_afp->if_nextents == 0))
return 0;
return 1;
}
/*
* Returns true if the there is exactly only block in the attr fork, in which
* case the attribute fork consists of a single leaf block entry.
*/
bool
xfs_attr_is_leaf(
struct xfs_inode *ip)
{
struct xfs_ifork *ifp = ip->i_afp;
struct xfs_iext_cursor icur;
struct xfs_bmbt_irec imap;
if (ifp->if_nextents != 1 || ifp->if_format != XFS_DINODE_FMT_EXTENTS)
return false;
xfs_iext_first(ifp, &icur);
xfs_iext_get_extent(ifp, &icur, &imap);
return imap.br_startoff == 0 && imap.br_blockcount == 1;
}
/*========================================================================
* Overall external interface routines.
*========================================================================*/
/*
* Retrieve an extended attribute and its value. Must have ilock.
* Returns 0 on successful retrieval, otherwise an error.
*/
int
xfs_attr_get_ilocked(
struct xfs_da_args *args)
{
ASSERT(xfs_isilocked(args->dp, XFS_ILOCK_SHARED | XFS_ILOCK_EXCL));
if (!xfs_inode_hasattr(args->dp))
return -ENOATTR;
if (args->dp->i_afp->if_format == XFS_DINODE_FMT_LOCAL)
return xfs_attr_shortform_getvalue(args);
if (xfs_attr_is_leaf(args->dp))
return xfs_attr_leaf_get(args);
return xfs_attr_node_get(args);
}
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-30 00:04:10 +08:00
/*
* Retrieve an extended attribute by name, and its value if requested.
*
* If args->valuelen is zero, then the caller does not want the value, just an
* indication whether the attribute exists and the size of the value if it
* exists. The size is returned in args.valuelen.
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-30 00:04:10 +08:00
*
* If args->value is NULL but args->valuelen is non-zero, allocate the buffer
* for the value after existence of the attribute has been determined. The
* caller always has to free args->value if it is set, no matter if this
* function was successful or not.
*
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-30 00:04:10 +08:00
* If the attribute is found, but exceeds the size limit set by the caller in
* args->valuelen, return -ERANGE with the size of the attribute that was found
* in args->valuelen.
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-30 00:04:10 +08:00
*/
int
xfs_attr_get(
struct xfs_da_args *args)
{
uint lock_mode;
int error;
XFS_STATS_INC(args->dp->i_mount, xs_attr_get);
if (xfs_is_shutdown(args->dp->i_mount))
return -EIO;
args->geo = args->dp->i_mount->m_attr_geo;
args->whichfork = XFS_ATTR_FORK;
args->hashval = xfs_da_hashname(args->name, args->namelen);
/* Entirely possible to look up a name which doesn't exist */
args->op_flags = XFS_DA_OP_OKNOENT;
lock_mode = xfs_ilock_attr_map_shared(args->dp);
error = xfs_attr_get_ilocked(args);
xfs_iunlock(args->dp, lock_mode);
xfs: allocate xattr buffer on demand When doing file lookups and checking for permissions, we end up in xfs_get_acl() to see if there are any ACLs on the inode. This requires and xattr lookup, and to do that we have to supply a buffer large enough to hold an maximum sized xattr. On workloads were we are accessing a wide range of cache cold files under memory pressure (e.g. NFS fileservers) we end up spending a lot of time allocating the buffer. The buffer is 64k in length, so is a contiguous multi-page allocation, and if that then fails we fall back to vmalloc(). Hence the allocation here is /expensive/ when we are looking up hundreds of thousands of files a second. Initial numbers from a bpf trace show average time in xfs_get_acl() is ~32us, with ~19us of that in the memory allocation. Note these are average times, so there are going to be affected by the worst case allocations more than the common fast case... To avoid this, we could just do a "null" lookup to see if the ACL xattr exists and then only do the allocation if it exists. This, however, optimises the path for the "no ACL present" case at the expense of the "acl present" case. i.e. we can halve the time in xfs_get_acl() for the no acl case (i.e down to ~10-15us), but that then increases the ACL case by 30% (i.e. up to 40-45us). To solve this and speed up both cases, drive the xattr buffer allocation into the attribute code once we know what the actual xattr length is. For the no-xattr case, we avoid the allocation completely, speeding up that case. For the common ACL case, we'll end up with a fast heap allocation (because it'll be smaller than a page), and only for the rarer "we have a remote xattr" will we have a multi-page allocation occur. Hence the common ACL case will be much faster, too. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-30 00:04:10 +08:00
return error;
}
/*
* Calculate how many blocks we need for the new attribute,
*/
STATIC int
xfs_attr_calc_size(
struct xfs_da_args *args,
int *local)
{
struct xfs_mount *mp = args->dp->i_mount;
int size;
int nblks;
/*
* Determine space new attribute will use, and if it would be
* "local" or "remote" (note: local != inline).
*/
size = xfs_attr_leaf_newentsize(args, local);
nblks = XFS_DAENTER_SPACE_RES(mp, XFS_ATTR_FORK);
if (*local) {
if (size > (args->geo->blksize / 2)) {
/* Double split possible */
nblks *= 2;
}
} else {
/*
* Out of line attribute, cannot double split, but
* make room for the attribute value itself.
*/
uint dblocks = xfs_attr3_rmt_blocks(mp, args->valuelen);
nblks += dblocks;
nblks += XFS_NEXTENTADD_SPACE_RES(mp, dblocks, XFS_ATTR_FORK);
}
return nblks;
}
STATIC int
xfs_attr_try_sf_addname(
struct xfs_inode *dp,
struct xfs_da_args *args)
{
int error;
/*
* Build initial attribute list (if required).
*/
if (dp->i_afp->if_format == XFS_DINODE_FMT_EXTENTS)
xfs_attr_shortform_create(args);
error = xfs_attr_shortform_addname(args);
if (error == -ENOSPC)
return error;
/*
* Commit the shortform mods, and we're done.
* NOTE: this is also the error path (EEXIST, etc).
*/
if (!error && !(args->op_flags & XFS_DA_OP_NOTIME))
xfs_trans_ichgtime(args->trans, dp, XFS_ICHGTIME_CHG);
if (xfs_has_wsync(dp->i_mount))
xfs_trans_set_sync(args->trans);
return error;
}
/*
* Check to see if the attr should be upgraded from non-existent or shortform to
* single-leaf-block attribute list.
*/
static inline bool
xfs_attr_is_shortform(
struct xfs_inode *ip)
{
return ip->i_afp->if_format == XFS_DINODE_FMT_LOCAL ||
(ip->i_afp->if_format == XFS_DINODE_FMT_EXTENTS &&
ip->i_afp->if_nextents == 0);
}
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
/*
* Checks to see if a delayed attribute transaction should be rolled. If so,
* transaction is finished or rolled as needed.
*/
STATIC int
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
xfs_attr_trans_roll(
struct xfs_delattr_context *dac)
{
struct xfs_da_args *args = dac->da_args;
int error;
if (dac->flags & XFS_DAC_DEFER_FINISH) {
/*
* The caller wants us to finish all the deferred ops so that we
* avoid pinning the log tail with a large number of deferred
* ops.
*/
dac->flags &= ~XFS_DAC_DEFER_FINISH;
error = xfs_defer_finish(&args->trans);
} else
error = xfs_trans_roll_inode(&args->trans, args->dp);
return error;
}
/*
* Set the attribute specified in @args.
*/
int
xfs_attr_set_args(
struct xfs_da_args *args)
{
struct xfs_buf *leaf_bp = NULL;
int error = 0;
struct xfs_delattr_context dac = {
.da_args = args,
};
do {
error = xfs_attr_set_iter(&dac, &leaf_bp);
if (error != -EAGAIN)
break;
error = xfs_attr_trans_roll(&dac);
if (error) {
if (leaf_bp)
xfs_trans_brelse(args->trans, leaf_bp);
return error;
}
} while (true);
return error;
}
STATIC int
xfs_attr_sf_addname(
struct xfs_delattr_context *dac,
struct xfs_buf **leaf_bp)
{
struct xfs_da_args *args = dac->da_args;
struct xfs_inode *dp = args->dp;
int error = 0;
/*
* Try to add the attr to the attribute list in the inode.
*/
error = xfs_attr_try_sf_addname(dp, args);
/* Should only be 0, -EEXIST or -ENOSPC */
if (error != -ENOSPC)
return error;
/*
* It won't fit in the shortform, transform to a leaf block. GROT:
* another possible req'mt for a double-split btree op.
*/
error = xfs_attr_shortform_to_leaf(args, leaf_bp);
if (error)
return error;
/*
* Prevent the leaf buffer from being unlocked so that a concurrent AIL
* push cannot grab the half-baked leaf buffer and run into problems
* with the write verifier.
*/
xfs_trans_bhold(args->trans, *leaf_bp);
/*
* We're still in XFS_DAS_UNINIT state here. We've converted
* the attr fork to leaf format and will restart with the leaf
* add.
*/
trace_xfs_attr_sf_addname_return(XFS_DAS_UNINIT, args->dp);
dac->flags |= XFS_DAC_DEFER_FINISH;
return -EAGAIN;
}
/*
* Set the attribute specified in @args.
* This routine is meant to function as a delayed operation, and may return
* -EAGAIN when the transaction needs to be rolled. Calling functions will need
* to handle this, and recall the function until a successful error code is
* returned.
*/
int
xfs_attr_set_iter(
struct xfs_delattr_context *dac,
struct xfs_buf **leaf_bp)
{
struct xfs_da_args *args = dac->da_args;
struct xfs_inode *dp = args->dp;
struct xfs_buf *bp = NULL;
int forkoff, error = 0;
/* State machine switch */
switch (dac->dela_state) {
case XFS_DAS_UNINIT:
/*
* If the fork is shortform, attempt to add the attr. If there
* is no space, this converts to leaf format and returns
* -EAGAIN with the leaf buffer held across the roll. The caller
* will deal with a transaction roll error, but otherwise
* release the hold once we return with a clean transaction.
*/
if (xfs_attr_is_shortform(dp))
return xfs_attr_sf_addname(dac, leaf_bp);
if (*leaf_bp != NULL) {
xfs_trans_bhold_release(args->trans, *leaf_bp);
*leaf_bp = NULL;
}
if (xfs_attr_is_leaf(dp)) {
error = xfs_attr_leaf_try_add(args, *leaf_bp);
if (error == -ENOSPC) {
error = xfs_attr3_leaf_to_node(args);
if (error)
return error;
/*
* Finish any deferred work items and roll the
* transaction once more. The goal here is to
* call node_addname with the inode and
* transaction in the same state (inode locked
* and joined, transaction clean) no matter how
* we got to this step.
*
* At this point, we are still in
* XFS_DAS_UNINIT, but when we come back, we'll
* be a node, so we'll fall down into the node
* handling code below
*/
dac->flags |= XFS_DAC_DEFER_FINISH;
trace_xfs_attr_set_iter_return(
dac->dela_state, args->dp);
return -EAGAIN;
} else if (error) {
return error;
}
dac->dela_state = XFS_DAS_FOUND_LBLK;
} else {
error = xfs_attr_node_addname_find_attr(dac);
if (error)
return error;
error = xfs_attr_node_addname(dac);
if (error)
return error;
dac->dela_state = XFS_DAS_FOUND_NBLK;
}
trace_xfs_attr_set_iter_return(dac->dela_state, args->dp);
return -EAGAIN;
case XFS_DAS_FOUND_LBLK:
/*
* If there was an out-of-line value, allocate the blocks we
* identified for its storage and copy the value. This is done
* after we create the attribute so that we don't overflow the
* maximum size of a transaction and/or hit a deadlock.
*/
/* Open coded xfs_attr_rmtval_set without trans handling */
if ((dac->flags & XFS_DAC_LEAF_ADDNAME_INIT) == 0) {
dac->flags |= XFS_DAC_LEAF_ADDNAME_INIT;
if (args->rmtblkno > 0) {
error = xfs_attr_rmtval_find_space(dac);
if (error)
return error;
}
}
/*
* Repeat allocating remote blocks for the attr value until
* blkcnt drops to zero.
*/
if (dac->blkcnt > 0) {
error = xfs_attr_rmtval_set_blk(dac);
if (error)
return error;
trace_xfs_attr_set_iter_return(dac->dela_state,
args->dp);
return -EAGAIN;
}
error = xfs_attr_rmtval_set_value(args);
if (error)
return error;
/*
* If this is not a rename, clear the incomplete flag and we're
* done.
*/
if (!(args->op_flags & XFS_DA_OP_RENAME)) {
if (args->rmtblkno > 0)
error = xfs_attr3_leaf_clearflag(args);
return error;
}
/*
* If this is an atomic rename operation, we must "flip" the
* incomplete flags on the "new" and "old" attribute/value pairs
* so that one disappears and one appears atomically. Then we
* must remove the "old" attribute/value pair.
*
* In a separate transaction, set the incomplete flag on the
* "old" attr and clear the incomplete flag on the "new" attr.
*/
error = xfs_attr3_leaf_flipflags(args);
if (error)
return error;
/*
* Commit the flag value change and start the next trans in
* series.
*/
dac->dela_state = XFS_DAS_FLIP_LFLAG;
trace_xfs_attr_set_iter_return(dac->dela_state, args->dp);
return -EAGAIN;
case XFS_DAS_FLIP_LFLAG:
/*
* Dismantle the "old" attribute/value pair by removing a
* "remote" value (if it exists).
*/
xfs_attr_restore_rmt_blk(args);
error = xfs_attr_rmtval_invalidate(args);
if (error)
return error;
xfs: Fix multiple fall-through warnings for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warnings by replacing /* fallthrough */ comments, and its variants, with the new pseudo-keyword macro fallthrough: fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Notice that Clang doesn't recognize /* fallthrough */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-15 22:09:14 +08:00
fallthrough;
case XFS_DAS_RM_LBLK:
/* Set state in case xfs_attr_rmtval_remove returns -EAGAIN */
dac->dela_state = XFS_DAS_RM_LBLK;
if (args->rmtblkno) {
error = xfs_attr_rmtval_remove(dac);
if (error == -EAGAIN)
trace_xfs_attr_set_iter_return(
dac->dela_state, args->dp);
if (error)
return error;
dac->dela_state = XFS_DAS_RD_LEAF;
trace_xfs_attr_set_iter_return(dac->dela_state, args->dp);
return -EAGAIN;
}
xfs: Fix multiple fall-through warnings for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warnings by replacing /* fallthrough */ comments, and its variants, with the new pseudo-keyword macro fallthrough: fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Notice that Clang doesn't recognize /* fallthrough */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-15 22:09:14 +08:00
fallthrough;
case XFS_DAS_RD_LEAF:
/*
* This is the last step for leaf format. Read the block with
* the old attr, remove the old attr, check for shortform
* conversion and return.
*/
error = xfs_attr3_leaf_read(args->trans, args->dp, args->blkno,
&bp);
if (error)
return error;
xfs_attr3_leaf_remove(bp, args);
forkoff = xfs_attr_shortform_allfit(bp, dp);
if (forkoff)
error = xfs_attr3_leaf_to_shortform(bp, args, forkoff);
/* bp is gone due to xfs_da_shrink_inode */
return error;
case XFS_DAS_FOUND_NBLK:
/*
* Find space for remote blocks and fall into the allocation
* state.
*/
if (args->rmtblkno > 0) {
error = xfs_attr_rmtval_find_space(dac);
if (error)
return error;
}
xfs: Fix multiple fall-through warnings for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warnings by replacing /* fallthrough */ comments, and its variants, with the new pseudo-keyword macro fallthrough: fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Notice that Clang doesn't recognize /* fallthrough */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-15 22:09:14 +08:00
fallthrough;
case XFS_DAS_ALLOC_NODE:
/*
* If there was an out-of-line value, allocate the blocks we
* identified for its storage and copy the value. This is done
* after we create the attribute so that we don't overflow the
* maximum size of a transaction and/or hit a deadlock.
*/
dac->dela_state = XFS_DAS_ALLOC_NODE;
if (args->rmtblkno > 0) {
if (dac->blkcnt > 0) {
error = xfs_attr_rmtval_set_blk(dac);
if (error)
return error;
trace_xfs_attr_set_iter_return(
dac->dela_state, args->dp);
return -EAGAIN;
}
error = xfs_attr_rmtval_set_value(args);
if (error)
return error;
}
/*
* If this was not a rename, clear the incomplete flag and we're
* done.
*/
if (!(args->op_flags & XFS_DA_OP_RENAME)) {
if (args->rmtblkno > 0)
error = xfs_attr3_leaf_clearflag(args);
goto out;
}
/*
* If this is an atomic rename operation, we must "flip" the
* incomplete flags on the "new" and "old" attribute/value pairs
* so that one disappears and one appears atomically. Then we
* must remove the "old" attribute/value pair.
*
* In a separate transaction, set the incomplete flag on the
* "old" attr and clear the incomplete flag on the "new" attr.
*/
error = xfs_attr3_leaf_flipflags(args);
if (error)
goto out;
/*
* Commit the flag value change and start the next trans in
* series
*/
dac->dela_state = XFS_DAS_FLIP_NFLAG;
trace_xfs_attr_set_iter_return(dac->dela_state, args->dp);
return -EAGAIN;
case XFS_DAS_FLIP_NFLAG:
/*
* Dismantle the "old" attribute/value pair by removing a
* "remote" value (if it exists).
*/
xfs_attr_restore_rmt_blk(args);
error = xfs_attr_rmtval_invalidate(args);
if (error)
return error;
xfs: Fix multiple fall-through warnings for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warnings by replacing /* fallthrough */ comments, and its variants, with the new pseudo-keyword macro fallthrough: fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Notice that Clang doesn't recognize /* fallthrough */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-15 22:09:14 +08:00
fallthrough;
case XFS_DAS_RM_NBLK:
/* Set state in case xfs_attr_rmtval_remove returns -EAGAIN */
dac->dela_state = XFS_DAS_RM_NBLK;
if (args->rmtblkno) {
error = xfs_attr_rmtval_remove(dac);
if (error == -EAGAIN)
trace_xfs_attr_set_iter_return(
dac->dela_state, args->dp);
if (error)
return error;
dac->dela_state = XFS_DAS_CLR_FLAG;
trace_xfs_attr_set_iter_return(dac->dela_state, args->dp);
return -EAGAIN;
}
xfs: Fix multiple fall-through warnings for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warnings by replacing /* fallthrough */ comments, and its variants, with the new pseudo-keyword macro fallthrough: fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Notice that Clang doesn't recognize /* fallthrough */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-15 22:09:14 +08:00
fallthrough;
case XFS_DAS_CLR_FLAG:
/*
* The last state for node format. Look up the old attr and
* remove it.
*/
error = xfs_attr_node_addname_clear_incomplete(dac);
break;
default:
ASSERT(0);
break;
}
out:
return error;
}
/*
* Return EEXIST if attr is found, or ENOATTR if not
*/
static int
xfs_attr_lookup(
struct xfs_da_args *args)
{
struct xfs_inode *dp = args->dp;
struct xfs_buf *bp = NULL;
int error;
if (!xfs_inode_hasattr(dp))
return -ENOATTR;
if (dp->i_afp->if_format == XFS_DINODE_FMT_LOCAL)
return xfs_attr_sf_findname(args, NULL, NULL);
if (xfs_attr_is_leaf(dp)) {
error = xfs_attr_leaf_hasname(args, &bp);
if (bp)
xfs_trans_brelse(args->trans, bp);
return error;
}
return xfs_attr_node_hasname(args, NULL);
}
/*
* Remove the attribute specified in @args.
*/
int
xfs_attr_remove_args(
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
struct xfs_da_args *args)
{
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
int error;
struct xfs_delattr_context dac = {
.da_args = args,
};
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
do {
error = xfs_attr_remove_iter(&dac);
if (error != -EAGAIN)
break;
error = xfs_attr_trans_roll(&dac);
if (error)
return error;
} while (true);
return error;
}
/*
* Note: If args->value is NULL the attribute will be removed, just like the
* Linux ->setattr API.
*/
int
xfs_attr_set(
struct xfs_da_args *args)
{
struct xfs_inode *dp = args->dp;
struct xfs_mount *mp = dp->i_mount;
struct xfs_trans_res tres;
bool rsvd = (args->attr_filter & XFS_ATTR_ROOT);
int error, local;
int rmt_blks = 0;
unsigned int total;
if (xfs_is_shutdown(dp->i_mount))
return -EIO;
error = xfs_qm_dqattach(dp);
if (error)
return error;
args->geo = mp->m_attr_geo;
args->whichfork = XFS_ATTR_FORK;
args->hashval = xfs_da_hashname(args->name, args->namelen);
/*
* We have no control over the attribute names that userspace passes us
* to remove, so we have to allow the name lookup prior to attribute
* removal to fail as well.
*/
args->op_flags = XFS_DA_OP_OKNOENT;
if (args->value) {
XFS_STATS_INC(mp, xs_attr_set);
args->op_flags |= XFS_DA_OP_ADDNAME;
args->total = xfs_attr_calc_size(args, &local);
/*
* If the inode doesn't have an attribute fork, add one.
* (inode must not be locked when we call this routine)
*/
if (XFS_IFORK_Q(dp) == 0) {
int sf_size = sizeof(struct xfs_attr_sf_hdr) +
xfs_attr_sf_entsize_byname(args->namelen,
args->valuelen);
error = xfs_bmap_add_attrfork(dp, sf_size, rsvd);
if (error)
return error;
}
tres.tr_logres = M_RES(mp)->tr_attrsetm.tr_logres +
M_RES(mp)->tr_attrsetrt.tr_logres *
args->total;
tres.tr_logcount = XFS_ATTRSET_LOG_COUNT;
tres.tr_logflags = XFS_TRANS_PERM_LOG_RES;
total = args->total;
if (!local)
rmt_blks = xfs_attr3_rmt_blocks(mp, args->valuelen);
} else {
XFS_STATS_INC(mp, xs_attr_remove);
tres = M_RES(mp)->tr_attrrm;
total = XFS_ATTRRM_SPACE_RES(mp);
rmt_blks = xfs_attr3_rmt_blocks(mp, XFS_XATTR_SIZE_MAX);
}
/*
* Root fork attributes can use reserved data blocks for this
* operation if necessary
*/
error = xfs_trans_alloc_inode(dp, &tres, total, 0, rsvd, &args->trans);
if (error)
return error;
if (args->value || xfs_inode_hasattr(dp)) {
error = xfs_iext_count_may_overflow(dp, XFS_ATTR_FORK,
XFS_IEXT_ATTR_MANIP_CNT(rmt_blks));
if (error)
goto out_trans_cancel;
}
error = xfs_attr_lookup(args);
if (args->value) {
if (error == -EEXIST && (args->attr_flags & XATTR_CREATE))
goto out_trans_cancel;
if (error == -ENOATTR && (args->attr_flags & XATTR_REPLACE))
goto out_trans_cancel;
if (error != -ENOATTR && error != -EEXIST)
goto out_trans_cancel;
error = xfs_attr_set_args(args);
if (error)
goto out_trans_cancel;
/* shortform attribute has already been committed */
if (!args->trans)
goto out_unlock;
} else {
if (error != -EEXIST)
goto out_trans_cancel;
error = xfs_attr_remove_args(args);
if (error)
goto out_trans_cancel;
}
/*
* If this is a synchronous mount, make sure that the
* transaction goes to disk before returning to the user.
*/
if (xfs_has_wsync(mp))
xfs_trans_set_sync(args->trans);
if (!(args->op_flags & XFS_DA_OP_NOTIME))
xfs_trans_ichgtime(args->trans, dp, XFS_ICHGTIME_CHG);
/*
* Commit the last in the sequence of transactions.
*/
xfs_trans_log_inode(args->trans, dp, XFS_ILOG_CORE);
error = xfs_trans_commit(args->trans);
out_unlock:
xfs_iunlock(dp, XFS_ILOCK_EXCL);
return error;
out_trans_cancel:
if (args->trans)
xfs_trans_cancel(args->trans);
goto out_unlock;
}
/*========================================================================
* External routines when attribute list is inside the inode
*========================================================================*/
static inline int xfs_attr_sf_totsize(struct xfs_inode *dp)
{
struct xfs_attr_shortform *sf;
sf = (struct xfs_attr_shortform *)dp->i_afp->if_u1.if_data;
return be16_to_cpu(sf->hdr.totsize);
}
/*
* Add a name to the shortform attribute list structure
* This is the external routine.
*/
STATIC int
xfs_attr_shortform_addname(xfs_da_args_t *args)
{
int newsize, forkoff, retval;
trace_xfs_attr_sf_addname(args);
retval = xfs_attr_shortform_lookup(args);
if (retval == -ENOATTR && (args->attr_flags & XATTR_REPLACE))
return retval;
if (retval == -EEXIST) {
if (args->attr_flags & XATTR_CREATE)
return retval;
retval = xfs_attr_sf_removename(args);
if (retval)
return retval;
/*
* Since we have removed the old attr, clear ATTR_REPLACE so
* that the leaf format add routine won't trip over the attr
* not being around.
*/
args->attr_flags &= ~XATTR_REPLACE;
}
if (args->namelen >= XFS_ATTR_SF_ENTSIZE_MAX ||
args->valuelen >= XFS_ATTR_SF_ENTSIZE_MAX)
return -ENOSPC;
newsize = xfs_attr_sf_totsize(args->dp);
newsize += xfs_attr_sf_entsize_byname(args->namelen, args->valuelen);
forkoff = xfs_attr_shortform_bytesfit(args->dp, newsize);
if (!forkoff)
return -ENOSPC;
xfs_attr_shortform_add(args, forkoff);
return 0;
}
/*========================================================================
* External routines when attribute list is one block
*========================================================================*/
/* Store info about a remote block */
STATIC void
xfs_attr_save_rmt_blk(
struct xfs_da_args *args)
{
args->blkno2 = args->blkno;
args->index2 = args->index;
args->rmtblkno2 = args->rmtblkno;
args->rmtblkcnt2 = args->rmtblkcnt;
args->rmtvaluelen2 = args->rmtvaluelen;
}
/* Set stored info about a remote block */
STATIC void
xfs_attr_restore_rmt_blk(
struct xfs_da_args *args)
{
args->blkno = args->blkno2;
args->index = args->index2;
args->rmtblkno = args->rmtblkno2;
args->rmtblkcnt = args->rmtblkcnt2;
args->rmtvaluelen = args->rmtvaluelen2;
}
/*
* Tries to add an attribute to an inode in leaf form
*
* This function is meant to execute as part of a delayed operation and leaves
* the transaction handling to the caller. On success the attribute is added
* and the inode and transaction are left dirty. If there is not enough space,
* the attr data is converted to node format and -ENOSPC is returned. Caller is
* responsible for handling the dirty inode and transaction or adding the attr
* in node format.
*/
STATIC int
xfs_attr_leaf_try_add(
struct xfs_da_args *args,
struct xfs_buf *bp)
{
int retval;
/*
* Look up the given attribute in the leaf block. Figure out if
* the given flags produce an error or call for an atomic rename.
*/
retval = xfs_attr_leaf_hasname(args, &bp);
if (retval != -ENOATTR && retval != -EEXIST)
return retval;
if (retval == -ENOATTR && (args->attr_flags & XATTR_REPLACE))
goto out_brelse;
if (retval == -EEXIST) {
if (args->attr_flags & XATTR_CREATE)
goto out_brelse;
trace_xfs_attr_leaf_replace(args);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-06 05:37:31 +08:00
/* save the attribute state for later removal*/
args->op_flags |= XFS_DA_OP_RENAME; /* an atomic rename */
xfs_attr_save_rmt_blk(args);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-06 05:37:31 +08:00
/*
* clear the remote attr state now that it is saved so that the
* values reflect the state of the attribute we are about to
* add, not the attribute we just found and will remove later.
*/
args->rmtblkno = 0;
args->rmtblkcnt = 0;
args->rmtvaluelen = 0;
}
/*
* Add the attribute to the leaf block
*/
return xfs_attr3_leaf_add(bp, args);
out_brelse:
xfs_trans_brelse(args->trans, bp);
return retval;
}
/*
* Return EEXIST if attr is found, or ENOATTR if not
*/
STATIC int
xfs_attr_leaf_hasname(
struct xfs_da_args *args,
struct xfs_buf **bp)
{
int error = 0;
error = xfs_attr3_leaf_read(args->trans, args->dp, 0, bp);
if (error)
return error;
error = xfs_attr3_leaf_lookup_int(*bp, args);
if (error != -ENOATTR && error != -EEXIST)
xfs_trans_brelse(args->trans, *bp);
return error;
}
/*
* Remove a name from the leaf attribute list structure
*
* This leaf block cannot have a "remote" value, we only call this routine
* if bmap_one_block() says there is only one block (ie: no remote blks).
*/
STATIC int
xfs_attr_leaf_removename(
struct xfs_da_args *args)
{
struct xfs_inode *dp;
struct xfs_buf *bp;
int error, forkoff;
trace_xfs_attr_leaf_removename(args);
/*
* Remove the attribute.
*/
dp = args->dp;
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
} else if (error != -EEXIST)
return error;
xfs_attr3_leaf_remove(bp, args);
/*
* If the result is small enough, shrink it all into the inode.
*/
forkoff = xfs_attr_shortform_allfit(bp, dp);
if (forkoff)
return xfs_attr3_leaf_to_shortform(bp, args, forkoff);
/* bp is gone due to xfs_da_shrink_inode */
return 0;
}
/*
* Look up a name in a leaf attribute list structure.
*
* This leaf block cannot have a "remote" value, we only call this routine
* if bmap_one_block() says there is only one block (ie: no remote blks).
*
* Returns 0 on successful retrieval, otherwise an error.
*/
STATIC int
xfs_attr_leaf_get(xfs_da_args_t *args)
{
struct xfs_buf *bp;
int error;
trace_xfs_attr_leaf_get(args);
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
} else if (error != -EEXIST)
return error;
error = xfs_attr3_leaf_getvalue(bp, args);
xfs_trans_brelse(args->trans, bp);
return error;
}
/*
* Return EEXIST if attr is found, or ENOATTR if not
* statep: If not null is set to point at the found state. Caller will
* be responsible for freeing the state in this case.
*/
STATIC int
xfs_attr_node_hasname(
struct xfs_da_args *args,
struct xfs_da_state **statep)
{
struct xfs_da_state *state;
int retval, error;
state = xfs_da_state_alloc(args);
if (statep != NULL)
xfs: Fix the free logic of state in xfs_attr_node_hasname When testing xfstests xfs/126 on lastest upstream kernel, it will hang on some machine. Adding a getxattr operation after xattr corrupted, I can reproduce it 100%. The deadlock as below: [983.923403] task:setfattr state:D stack: 0 pid:17639 ppid: 14687 flags:0x00000080 [ 983.923405] Call Trace: [ 983.923410] __schedule+0x2c4/0x700 [ 983.923412] schedule+0x37/0xa0 [ 983.923414] schedule_timeout+0x274/0x300 [ 983.923416] __down+0x9b/0xf0 [ 983.923451] ? xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923453] down+0x3b/0x50 [ 983.923471] xfs_buf_lock+0x33/0xf0 [xfs] [ 983.923490] xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923508] xfs_buf_get_map+0x4c/0x320 [xfs] [ 983.923525] xfs_buf_read_map+0x53/0x310 [xfs] [ 983.923541] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923560] xfs_trans_read_buf_map+0x1cf/0x360 [xfs] [ 983.923575] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923590] xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923606] xfs_da3_node_read+0x1f/0x40 [xfs] [ 983.923621] xfs_da3_node_lookup_int+0x69/0x4a0 [xfs] [ 983.923624] ? kmem_cache_alloc+0x12e/0x270 [ 983.923637] xfs_attr_node_hasname+0x6e/0xa0 [xfs] [ 983.923651] xfs_has_attr+0x6e/0xd0 [xfs] [ 983.923664] xfs_attr_set+0x273/0x320 [xfs] [ 983.923683] xfs_xattr_set+0x87/0xd0 [xfs] [ 983.923686] __vfs_removexattr+0x4d/0x60 [ 983.923688] __vfs_removexattr_locked+0xac/0x130 [ 983.923689] vfs_removexattr+0x4e/0xf0 [ 983.923690] removexattr+0x4d/0x80 [ 983.923693] ? __check_object_size+0xa8/0x16b [ 983.923695] ? strncpy_from_user+0x47/0x1a0 [ 983.923696] ? getname_flags+0x6a/0x1e0 [ 983.923697] ? _cond_resched+0x15/0x30 [ 983.923699] ? __sb_start_write+0x1e/0x70 [ 983.923700] ? mnt_want_write+0x28/0x50 [ 983.923701] path_removexattr+0x9b/0xb0 [ 983.923702] __x64_sys_removexattr+0x17/0x20 [ 983.923704] do_syscall_64+0x5b/0x1a0 [ 983.923705] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 983.923707] RIP: 0033:0x7f080f10ee1b When getxattr calls xfs_attr_node_get function, xfs_da3_node_lookup_int fails with EFSCORRUPTED in xfs_attr_node_hasname because we have use blocktrash to random it in xfs/126. So it free state in internal and xfs_attr_node_get doesn't do xfs_buf_trans release job. Then subsequent removexattr will hang because of it. This bug was introduced by kernel commit 07120f1abdff ("xfs: Add xfs_has_attr and subroutines"). It adds xfs_attr_node_hasname helper and said caller will be responsible for freeing the state in this case. But xfs_attr_node_hasname will free state itself instead of caller if xfs_da3_node_lookup_int fails. Fix this bug by moving the step of free state into caller. Also, use "goto error/out" instead of returning error directly in xfs_attr_node_addname_find_attr and xfs_attr_node_removename_setup function because we should free state ourselves. Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-11-25 02:06:02 +08:00
*statep = state;
/*
* Search to see if name exists, and get back a pointer to it.
*/
error = xfs_da3_node_lookup_int(state, &retval);
xfs: Fix the free logic of state in xfs_attr_node_hasname When testing xfstests xfs/126 on lastest upstream kernel, it will hang on some machine. Adding a getxattr operation after xattr corrupted, I can reproduce it 100%. The deadlock as below: [983.923403] task:setfattr state:D stack: 0 pid:17639 ppid: 14687 flags:0x00000080 [ 983.923405] Call Trace: [ 983.923410] __schedule+0x2c4/0x700 [ 983.923412] schedule+0x37/0xa0 [ 983.923414] schedule_timeout+0x274/0x300 [ 983.923416] __down+0x9b/0xf0 [ 983.923451] ? xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923453] down+0x3b/0x50 [ 983.923471] xfs_buf_lock+0x33/0xf0 [xfs] [ 983.923490] xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923508] xfs_buf_get_map+0x4c/0x320 [xfs] [ 983.923525] xfs_buf_read_map+0x53/0x310 [xfs] [ 983.923541] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923560] xfs_trans_read_buf_map+0x1cf/0x360 [xfs] [ 983.923575] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923590] xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923606] xfs_da3_node_read+0x1f/0x40 [xfs] [ 983.923621] xfs_da3_node_lookup_int+0x69/0x4a0 [xfs] [ 983.923624] ? kmem_cache_alloc+0x12e/0x270 [ 983.923637] xfs_attr_node_hasname+0x6e/0xa0 [xfs] [ 983.923651] xfs_has_attr+0x6e/0xd0 [xfs] [ 983.923664] xfs_attr_set+0x273/0x320 [xfs] [ 983.923683] xfs_xattr_set+0x87/0xd0 [xfs] [ 983.923686] __vfs_removexattr+0x4d/0x60 [ 983.923688] __vfs_removexattr_locked+0xac/0x130 [ 983.923689] vfs_removexattr+0x4e/0xf0 [ 983.923690] removexattr+0x4d/0x80 [ 983.923693] ? __check_object_size+0xa8/0x16b [ 983.923695] ? strncpy_from_user+0x47/0x1a0 [ 983.923696] ? getname_flags+0x6a/0x1e0 [ 983.923697] ? _cond_resched+0x15/0x30 [ 983.923699] ? __sb_start_write+0x1e/0x70 [ 983.923700] ? mnt_want_write+0x28/0x50 [ 983.923701] path_removexattr+0x9b/0xb0 [ 983.923702] __x64_sys_removexattr+0x17/0x20 [ 983.923704] do_syscall_64+0x5b/0x1a0 [ 983.923705] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 983.923707] RIP: 0033:0x7f080f10ee1b When getxattr calls xfs_attr_node_get function, xfs_da3_node_lookup_int fails with EFSCORRUPTED in xfs_attr_node_hasname because we have use blocktrash to random it in xfs/126. So it free state in internal and xfs_attr_node_get doesn't do xfs_buf_trans release job. Then subsequent removexattr will hang because of it. This bug was introduced by kernel commit 07120f1abdff ("xfs: Add xfs_has_attr and subroutines"). It adds xfs_attr_node_hasname helper and said caller will be responsible for freeing the state in this case. But xfs_attr_node_hasname will free state itself instead of caller if xfs_da3_node_lookup_int fails. Fix this bug by moving the step of free state into caller. Also, use "goto error/out" instead of returning error directly in xfs_attr_node_addname_find_attr and xfs_attr_node_removename_setup function because we should free state ourselves. Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-11-25 02:06:02 +08:00
if (error)
retval = error;
xfs: Fix the free logic of state in xfs_attr_node_hasname When testing xfstests xfs/126 on lastest upstream kernel, it will hang on some machine. Adding a getxattr operation after xattr corrupted, I can reproduce it 100%. The deadlock as below: [983.923403] task:setfattr state:D stack: 0 pid:17639 ppid: 14687 flags:0x00000080 [ 983.923405] Call Trace: [ 983.923410] __schedule+0x2c4/0x700 [ 983.923412] schedule+0x37/0xa0 [ 983.923414] schedule_timeout+0x274/0x300 [ 983.923416] __down+0x9b/0xf0 [ 983.923451] ? xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923453] down+0x3b/0x50 [ 983.923471] xfs_buf_lock+0x33/0xf0 [xfs] [ 983.923490] xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923508] xfs_buf_get_map+0x4c/0x320 [xfs] [ 983.923525] xfs_buf_read_map+0x53/0x310 [xfs] [ 983.923541] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923560] xfs_trans_read_buf_map+0x1cf/0x360 [xfs] [ 983.923575] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923590] xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923606] xfs_da3_node_read+0x1f/0x40 [xfs] [ 983.923621] xfs_da3_node_lookup_int+0x69/0x4a0 [xfs] [ 983.923624] ? kmem_cache_alloc+0x12e/0x270 [ 983.923637] xfs_attr_node_hasname+0x6e/0xa0 [xfs] [ 983.923651] xfs_has_attr+0x6e/0xd0 [xfs] [ 983.923664] xfs_attr_set+0x273/0x320 [xfs] [ 983.923683] xfs_xattr_set+0x87/0xd0 [xfs] [ 983.923686] __vfs_removexattr+0x4d/0x60 [ 983.923688] __vfs_removexattr_locked+0xac/0x130 [ 983.923689] vfs_removexattr+0x4e/0xf0 [ 983.923690] removexattr+0x4d/0x80 [ 983.923693] ? __check_object_size+0xa8/0x16b [ 983.923695] ? strncpy_from_user+0x47/0x1a0 [ 983.923696] ? getname_flags+0x6a/0x1e0 [ 983.923697] ? _cond_resched+0x15/0x30 [ 983.923699] ? __sb_start_write+0x1e/0x70 [ 983.923700] ? mnt_want_write+0x28/0x50 [ 983.923701] path_removexattr+0x9b/0xb0 [ 983.923702] __x64_sys_removexattr+0x17/0x20 [ 983.923704] do_syscall_64+0x5b/0x1a0 [ 983.923705] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 983.923707] RIP: 0033:0x7f080f10ee1b When getxattr calls xfs_attr_node_get function, xfs_da3_node_lookup_int fails with EFSCORRUPTED in xfs_attr_node_hasname because we have use blocktrash to random it in xfs/126. So it free state in internal and xfs_attr_node_get doesn't do xfs_buf_trans release job. Then subsequent removexattr will hang because of it. This bug was introduced by kernel commit 07120f1abdff ("xfs: Add xfs_has_attr and subroutines"). It adds xfs_attr_node_hasname helper and said caller will be responsible for freeing the state in this case. But xfs_attr_node_hasname will free state itself instead of caller if xfs_da3_node_lookup_int fails. Fix this bug by moving the step of free state into caller. Also, use "goto error/out" instead of returning error directly in xfs_attr_node_addname_find_attr and xfs_attr_node_removename_setup function because we should free state ourselves. Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-11-25 02:06:02 +08:00
if (!statep)
xfs_da_state_free(state);
xfs: Fix the free logic of state in xfs_attr_node_hasname When testing xfstests xfs/126 on lastest upstream kernel, it will hang on some machine. Adding a getxattr operation after xattr corrupted, I can reproduce it 100%. The deadlock as below: [983.923403] task:setfattr state:D stack: 0 pid:17639 ppid: 14687 flags:0x00000080 [ 983.923405] Call Trace: [ 983.923410] __schedule+0x2c4/0x700 [ 983.923412] schedule+0x37/0xa0 [ 983.923414] schedule_timeout+0x274/0x300 [ 983.923416] __down+0x9b/0xf0 [ 983.923451] ? xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923453] down+0x3b/0x50 [ 983.923471] xfs_buf_lock+0x33/0xf0 [xfs] [ 983.923490] xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923508] xfs_buf_get_map+0x4c/0x320 [xfs] [ 983.923525] xfs_buf_read_map+0x53/0x310 [xfs] [ 983.923541] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923560] xfs_trans_read_buf_map+0x1cf/0x360 [xfs] [ 983.923575] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923590] xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923606] xfs_da3_node_read+0x1f/0x40 [xfs] [ 983.923621] xfs_da3_node_lookup_int+0x69/0x4a0 [xfs] [ 983.923624] ? kmem_cache_alloc+0x12e/0x270 [ 983.923637] xfs_attr_node_hasname+0x6e/0xa0 [xfs] [ 983.923651] xfs_has_attr+0x6e/0xd0 [xfs] [ 983.923664] xfs_attr_set+0x273/0x320 [xfs] [ 983.923683] xfs_xattr_set+0x87/0xd0 [xfs] [ 983.923686] __vfs_removexattr+0x4d/0x60 [ 983.923688] __vfs_removexattr_locked+0xac/0x130 [ 983.923689] vfs_removexattr+0x4e/0xf0 [ 983.923690] removexattr+0x4d/0x80 [ 983.923693] ? __check_object_size+0xa8/0x16b [ 983.923695] ? strncpy_from_user+0x47/0x1a0 [ 983.923696] ? getname_flags+0x6a/0x1e0 [ 983.923697] ? _cond_resched+0x15/0x30 [ 983.923699] ? __sb_start_write+0x1e/0x70 [ 983.923700] ? mnt_want_write+0x28/0x50 [ 983.923701] path_removexattr+0x9b/0xb0 [ 983.923702] __x64_sys_removexattr+0x17/0x20 [ 983.923704] do_syscall_64+0x5b/0x1a0 [ 983.923705] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 983.923707] RIP: 0033:0x7f080f10ee1b When getxattr calls xfs_attr_node_get function, xfs_da3_node_lookup_int fails with EFSCORRUPTED in xfs_attr_node_hasname because we have use blocktrash to random it in xfs/126. So it free state in internal and xfs_attr_node_get doesn't do xfs_buf_trans release job. Then subsequent removexattr will hang because of it. This bug was introduced by kernel commit 07120f1abdff ("xfs: Add xfs_has_attr and subroutines"). It adds xfs_attr_node_hasname helper and said caller will be responsible for freeing the state in this case. But xfs_attr_node_hasname will free state itself instead of caller if xfs_da3_node_lookup_int fails. Fix this bug by moving the step of free state into caller. Also, use "goto error/out" instead of returning error directly in xfs_attr_node_addname_find_attr and xfs_attr_node_removename_setup function because we should free state ourselves. Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-11-25 02:06:02 +08:00
return retval;
}
/*========================================================================
* External routines when attribute list size > geo->blksize
*========================================================================*/
STATIC int
xfs_attr_node_addname_find_attr(
struct xfs_delattr_context *dac)
{
struct xfs_da_args *args = dac->da_args;
int retval;
/*
* Search to see if name already exists, and get back a pointer
* to where it should go.
*/
retval = xfs_attr_node_hasname(args, &dac->da_state);
if (retval != -ENOATTR && retval != -EEXIST)
xfs: Fix the free logic of state in xfs_attr_node_hasname When testing xfstests xfs/126 on lastest upstream kernel, it will hang on some machine. Adding a getxattr operation after xattr corrupted, I can reproduce it 100%. The deadlock as below: [983.923403] task:setfattr state:D stack: 0 pid:17639 ppid: 14687 flags:0x00000080 [ 983.923405] Call Trace: [ 983.923410] __schedule+0x2c4/0x700 [ 983.923412] schedule+0x37/0xa0 [ 983.923414] schedule_timeout+0x274/0x300 [ 983.923416] __down+0x9b/0xf0 [ 983.923451] ? xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923453] down+0x3b/0x50 [ 983.923471] xfs_buf_lock+0x33/0xf0 [xfs] [ 983.923490] xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923508] xfs_buf_get_map+0x4c/0x320 [xfs] [ 983.923525] xfs_buf_read_map+0x53/0x310 [xfs] [ 983.923541] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923560] xfs_trans_read_buf_map+0x1cf/0x360 [xfs] [ 983.923575] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923590] xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923606] xfs_da3_node_read+0x1f/0x40 [xfs] [ 983.923621] xfs_da3_node_lookup_int+0x69/0x4a0 [xfs] [ 983.923624] ? kmem_cache_alloc+0x12e/0x270 [ 983.923637] xfs_attr_node_hasname+0x6e/0xa0 [xfs] [ 983.923651] xfs_has_attr+0x6e/0xd0 [xfs] [ 983.923664] xfs_attr_set+0x273/0x320 [xfs] [ 983.923683] xfs_xattr_set+0x87/0xd0 [xfs] [ 983.923686] __vfs_removexattr+0x4d/0x60 [ 983.923688] __vfs_removexattr_locked+0xac/0x130 [ 983.923689] vfs_removexattr+0x4e/0xf0 [ 983.923690] removexattr+0x4d/0x80 [ 983.923693] ? __check_object_size+0xa8/0x16b [ 983.923695] ? strncpy_from_user+0x47/0x1a0 [ 983.923696] ? getname_flags+0x6a/0x1e0 [ 983.923697] ? _cond_resched+0x15/0x30 [ 983.923699] ? __sb_start_write+0x1e/0x70 [ 983.923700] ? mnt_want_write+0x28/0x50 [ 983.923701] path_removexattr+0x9b/0xb0 [ 983.923702] __x64_sys_removexattr+0x17/0x20 [ 983.923704] do_syscall_64+0x5b/0x1a0 [ 983.923705] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 983.923707] RIP: 0033:0x7f080f10ee1b When getxattr calls xfs_attr_node_get function, xfs_da3_node_lookup_int fails with EFSCORRUPTED in xfs_attr_node_hasname because we have use blocktrash to random it in xfs/126. So it free state in internal and xfs_attr_node_get doesn't do xfs_buf_trans release job. Then subsequent removexattr will hang because of it. This bug was introduced by kernel commit 07120f1abdff ("xfs: Add xfs_has_attr and subroutines"). It adds xfs_attr_node_hasname helper and said caller will be responsible for freeing the state in this case. But xfs_attr_node_hasname will free state itself instead of caller if xfs_da3_node_lookup_int fails. Fix this bug by moving the step of free state into caller. Also, use "goto error/out" instead of returning error directly in xfs_attr_node_addname_find_attr and xfs_attr_node_removename_setup function because we should free state ourselves. Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-11-25 02:06:02 +08:00
goto error;
if (retval == -ENOATTR && (args->attr_flags & XATTR_REPLACE))
goto error;
if (retval == -EEXIST) {
if (args->attr_flags & XATTR_CREATE)
goto error;
trace_xfs_attr_node_replace(args);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-06 05:37:31 +08:00
/* save the attribute state for later removal*/
args->op_flags |= XFS_DA_OP_RENAME; /* atomic rename op */
xfs_attr_save_rmt_blk(args);
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-06 05:37:31 +08:00
/*
* clear the remote attr state now that it is saved so that the
* values reflect the state of the attribute we are about to
* add, not the attribute we just found and will remove later.
*/
args->rmtblkno = 0;
args->rmtblkcnt = 0;
xfs: remote attribute overwrite causes transaction overrun Commit e461fcb ("xfs: remote attribute lookups require the value length") passes the remote attribute length in the xfs_da_args structure on lookup so that CRC calculations and validity checking can be performed correctly by related code. This, unfortunately has the side effect of changing the args->valuelen parameter in cases where it shouldn't. That is, when we replace a remote attribute, the incoming replacement stores the value and length in args->value and args->valuelen, but then the lookup which finds the existing remote attribute overwrites args->valuelen with the length of the remote attribute being replaced. Hence when we go to create the new attribute, we create it of the size of the existing remote attribute, not the size it is supposed to be. When the new attribute is much smaller than the old attribute, this results in a transaction overrun and an ASSERT() failure on a debug kernel: XFS: Assertion failed: tp->t_blk_res_used <= tp->t_blk_res, file: fs/xfs/xfs_trans.c, line: 331 Fix this by keeping the remote attribute value length separate to the attribute value length in the xfs_da_args structure. The enables us to pass the length of the remote attribute to be removed without overwriting the new attribute's length. Also, ensure that when we save remote block contexts for a later rename we zero the original state variables so that we don't confuse the state of the attribute to be removes with the state of the new attribute that we just added. [Spotted by Brain Foster.] Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-06 05:37:31 +08:00
args->rmtvaluelen = 0;
}
return 0;
error:
if (dac->da_state)
xfs_da_state_free(dac->da_state);
return retval;
}
/*
* Add a name to a Btree-format attribute list.
*
* This will involve walking down the Btree, and may involve splitting
* leaf nodes and even splitting intermediate nodes up to and including
* the root node (a special case of an intermediate node).
*
* "Remote" attribute values confuse the issue and atomic rename operations
* add a whole extra layer of confusion on top of that.
*
* This routine is meant to function as a delayed operation, and may return
* -EAGAIN when the transaction needs to be rolled. Calling functions will need
* to handle this, and recall the function until a successful error code is
*returned.
*/
STATIC int
xfs_attr_node_addname(
struct xfs_delattr_context *dac)
{
struct xfs_da_args *args = dac->da_args;
struct xfs_da_state *state = dac->da_state;
struct xfs_da_state_blk *blk;
int error;
trace_xfs_attr_node_addname(args);
blk = &state->path.blk[state->path.active-1];
ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC);
error = xfs_attr3_leaf_add(blk->bp, state->args);
if (error == -ENOSPC) {
if (state->path.active == 1) {
/*
* Its really a single leaf node, but it had
* out-of-line values so it looked like it *might*
* have been a b-tree.
*/
xfs_da_state_free(state);
state = NULL;
error = xfs_attr3_leaf_to_node(args);
if (error)
goto out;
/*
* Now that we have converted the leaf to a node, we can
* roll the transaction, and try xfs_attr3_leaf_add
* again on re-entry. No need to set dela_state to do
* this. dela_state is still unset by this function at
* this point.
*/
dac->flags |= XFS_DAC_DEFER_FINISH;
trace_xfs_attr_node_addname_return(
dac->dela_state, args->dp);
return -EAGAIN;
}
/*
* Split as many Btree elements as required.
* This code tracks the new and old attr's location
* in the index/blkno/rmtblkno/rmtblkcnt fields and
* in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields.
*/
error = xfs_da3_split(state);
if (error)
goto out;
dac->flags |= XFS_DAC_DEFER_FINISH;
} else {
/*
* Addition succeeded, update Btree hashvals.
*/
xfs_da3_fixhashpath(state, &state->path);
}
out:
if (state)
xfs_da_state_free(state);
return error;
}
STATIC int
xfs_attr_node_addname_clear_incomplete(
struct xfs_delattr_context *dac)
{
struct xfs_da_args *args = dac->da_args;
struct xfs_da_state *state = NULL;
int retval = 0;
int error = 0;
/*
* Re-find the "old" attribute entry after any split ops. The INCOMPLETE
* flag means that we will find the "old" attr, not the "new" one.
*/
args->attr_filter |= XFS_ATTR_INCOMPLETE;
state = xfs_da_state_alloc(args);
state->inleaf = 0;
error = xfs_da3_node_lookup_int(state, &retval);
if (error)
goto out;
error = xfs_attr_node_removename(args, state);
/*
* Check to see if the tree needs to be collapsed.
*/
if (retval && (state->path.active > 1)) {
error = xfs_da3_join(state);
if (error)
goto out;
}
retval = error = 0;
out:
if (state)
xfs_da_state_free(state);
if (error)
return error;
return retval;
}
/*
* Shrink an attribute from leaf to shortform
*/
STATIC int
xfs_attr_node_shrink(
struct xfs_da_args *args,
struct xfs_da_state *state)
{
struct xfs_inode *dp = args->dp;
int error, forkoff;
struct xfs_buf *bp;
/*
* Have to get rid of the copy of this dabuf in the state.
*/
ASSERT(state->path.active == 1);
ASSERT(state->path.blk[0].bp);
state->path.blk[0].bp = NULL;
error = xfs_attr3_leaf_read(args->trans, args->dp, 0, &bp);
if (error)
return error;
forkoff = xfs_attr_shortform_allfit(bp, dp);
if (forkoff) {
error = xfs_attr3_leaf_to_shortform(bp, args, forkoff);
/* bp is gone due to xfs_da_shrink_inode */
} else
xfs_trans_brelse(args->trans, bp);
return error;
}
/*
* Mark an attribute entry INCOMPLETE and save pointers to the relevant buffers
* for later deletion of the entry.
*/
STATIC int
xfs_attr_leaf_mark_incomplete(
struct xfs_da_args *args,
struct xfs_da_state *state)
{
int error;
/*
* Fill in disk block numbers in the state structure
* so that we can get the buffers back after we commit
* several transactions in the following calls.
*/
error = xfs_attr_fillstate(state);
if (error)
return error;
/*
* Mark the attribute as INCOMPLETE
*/
return xfs_attr3_leaf_setflag(args);
}
/*
* Initial setup for xfs_attr_node_removename. Make sure the attr is there and
* the blocks are valid. Attr keys with remote blocks will be marked
* incomplete.
*/
STATIC
int xfs_attr_node_removename_setup(
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
struct xfs_delattr_context *dac)
{
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
struct xfs_da_args *args = dac->da_args;
struct xfs_da_state **state = &dac->da_state;
int error;
error = xfs_attr_node_hasname(args, state);
if (error != -EEXIST)
xfs: Fix the free logic of state in xfs_attr_node_hasname When testing xfstests xfs/126 on lastest upstream kernel, it will hang on some machine. Adding a getxattr operation after xattr corrupted, I can reproduce it 100%. The deadlock as below: [983.923403] task:setfattr state:D stack: 0 pid:17639 ppid: 14687 flags:0x00000080 [ 983.923405] Call Trace: [ 983.923410] __schedule+0x2c4/0x700 [ 983.923412] schedule+0x37/0xa0 [ 983.923414] schedule_timeout+0x274/0x300 [ 983.923416] __down+0x9b/0xf0 [ 983.923451] ? xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923453] down+0x3b/0x50 [ 983.923471] xfs_buf_lock+0x33/0xf0 [xfs] [ 983.923490] xfs_buf_find.isra.29+0x3c8/0x5f0 [xfs] [ 983.923508] xfs_buf_get_map+0x4c/0x320 [xfs] [ 983.923525] xfs_buf_read_map+0x53/0x310 [xfs] [ 983.923541] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923560] xfs_trans_read_buf_map+0x1cf/0x360 [xfs] [ 983.923575] ? xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923590] xfs_da_read_buf+0xcf/0x120 [xfs] [ 983.923606] xfs_da3_node_read+0x1f/0x40 [xfs] [ 983.923621] xfs_da3_node_lookup_int+0x69/0x4a0 [xfs] [ 983.923624] ? kmem_cache_alloc+0x12e/0x270 [ 983.923637] xfs_attr_node_hasname+0x6e/0xa0 [xfs] [ 983.923651] xfs_has_attr+0x6e/0xd0 [xfs] [ 983.923664] xfs_attr_set+0x273/0x320 [xfs] [ 983.923683] xfs_xattr_set+0x87/0xd0 [xfs] [ 983.923686] __vfs_removexattr+0x4d/0x60 [ 983.923688] __vfs_removexattr_locked+0xac/0x130 [ 983.923689] vfs_removexattr+0x4e/0xf0 [ 983.923690] removexattr+0x4d/0x80 [ 983.923693] ? __check_object_size+0xa8/0x16b [ 983.923695] ? strncpy_from_user+0x47/0x1a0 [ 983.923696] ? getname_flags+0x6a/0x1e0 [ 983.923697] ? _cond_resched+0x15/0x30 [ 983.923699] ? __sb_start_write+0x1e/0x70 [ 983.923700] ? mnt_want_write+0x28/0x50 [ 983.923701] path_removexattr+0x9b/0xb0 [ 983.923702] __x64_sys_removexattr+0x17/0x20 [ 983.923704] do_syscall_64+0x5b/0x1a0 [ 983.923705] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 983.923707] RIP: 0033:0x7f080f10ee1b When getxattr calls xfs_attr_node_get function, xfs_da3_node_lookup_int fails with EFSCORRUPTED in xfs_attr_node_hasname because we have use blocktrash to random it in xfs/126. So it free state in internal and xfs_attr_node_get doesn't do xfs_buf_trans release job. Then subsequent removexattr will hang because of it. This bug was introduced by kernel commit 07120f1abdff ("xfs: Add xfs_has_attr and subroutines"). It adds xfs_attr_node_hasname helper and said caller will be responsible for freeing the state in this case. But xfs_attr_node_hasname will free state itself instead of caller if xfs_da3_node_lookup_int fails. Fix this bug by moving the step of free state into caller. Also, use "goto error/out" instead of returning error directly in xfs_attr_node_addname_find_attr and xfs_attr_node_removename_setup function because we should free state ourselves. Fixes: 07120f1abdff ("xfs: Add xfs_has_attr and subroutines") Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-11-25 02:06:02 +08:00
goto out;
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
error = 0;
ASSERT((*state)->path.blk[(*state)->path.active - 1].bp != NULL);
ASSERT((*state)->path.blk[(*state)->path.active - 1].magic ==
XFS_ATTR_LEAF_MAGIC);
if (args->rmtblkno > 0) {
error = xfs_attr_leaf_mark_incomplete(args, *state);
if (error)
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
goto out;
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
error = xfs_attr_rmtval_invalidate(args);
}
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
out:
if (error)
xfs_da_state_free(*state);
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
return error;
}
STATIC int
xfs_attr_node_removename(
struct xfs_da_args *args,
struct xfs_da_state *state)
{
struct xfs_da_state_blk *blk;
int retval;
/*
* Remove the name and update the hashvals in the tree.
*/
blk = &state->path.blk[state->path.active-1];
ASSERT(blk->magic == XFS_ATTR_LEAF_MAGIC);
retval = xfs_attr3_leaf_remove(blk->bp, args);
xfs_da3_fixhashpath(state, &state->path);
return retval;
}
/*
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
* Remove the attribute specified in @args.
*
* This will involve walking down the Btree, and may involve joining
* leaf nodes and even joining intermediate nodes up to and including
* the root node (a special case of an intermediate node).
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
*
* This routine is meant to function as either an in-line or delayed operation,
* and may return -EAGAIN when the transaction needs to be rolled. Calling
* functions will need to handle this, and call the function until a
* successful error code is returned.
*/
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
int
xfs_attr_remove_iter(
struct xfs_delattr_context *dac)
{
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
struct xfs_da_args *args = dac->da_args;
struct xfs_da_state *state = dac->da_state;
int retval, error = 0;
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
struct xfs_inode *dp = args->dp;
trace_xfs_attr_node_removename(args);
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
switch (dac->dela_state) {
case XFS_DAS_UNINIT:
if (!xfs_inode_hasattr(dp))
return -ENOATTR;
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
/*
* Shortform or leaf formats don't require transaction rolls and
* thus state transitions. Call the right helper and return.
*/
if (dp->i_afp->if_format == XFS_DINODE_FMT_LOCAL)
return xfs_attr_sf_removename(args);
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
if (xfs_attr_is_leaf(dp))
return xfs_attr_leaf_removename(args);
/*
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
* Node format may require transaction rolls. Set up the
* state context and fall into the state machine.
*/
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
if (!dac->da_state) {
error = xfs_attr_node_removename_setup(dac);
if (error)
return error;
state = dac->da_state;
}
xfs: Fix multiple fall-through warnings for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warnings by replacing /* fallthrough */ comments, and its variants, with the new pseudo-keyword macro fallthrough: fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Notice that Clang doesn't recognize /* fallthrough */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-15 22:09:14 +08:00
fallthrough;
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
case XFS_DAS_RMTBLK:
dac->dela_state = XFS_DAS_RMTBLK;
/*
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
* If there is an out-of-line value, de-allocate the blocks.
* This is done before we remove the attribute so that we don't
* overflow the maximum size of a transaction and/or hit a
* deadlock.
*/
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
if (args->rmtblkno > 0) {
/*
* May return -EAGAIN. Roll and repeat until all remote
* blocks are removed.
*/
error = xfs_attr_rmtval_remove(dac);
if (error == -EAGAIN) {
trace_xfs_attr_remove_iter_return(
dac->dela_state, args->dp);
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
return error;
} else if (error) {
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
goto out;
}
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
/*
* Refill the state structure with buffers (the prior
* calls released our buffers) and close out this
* transaction before proceeding.
*/
ASSERT(args->rmtblkno == 0);
error = xfs_attr_refillstate(state);
if (error)
goto out;
dac->dela_state = XFS_DAS_RM_NAME;
dac->flags |= XFS_DAC_DEFER_FINISH;
trace_xfs_attr_remove_iter_return(dac->dela_state, args->dp);
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
return -EAGAIN;
}
xfs: Fix multiple fall-through warnings for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warnings by replacing /* fallthrough */ comments, and its variants, with the new pseudo-keyword macro fallthrough: fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Notice that Clang doesn't recognize /* fallthrough */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-15 22:09:14 +08:00
fallthrough;
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
case XFS_DAS_RM_NAME:
/*
* If we came here fresh from a transaction roll, reattach all
* the buffers to the current transaction.
*/
if (dac->dela_state == XFS_DAS_RM_NAME) {
error = xfs_attr_refillstate(state);
if (error)
goto out;
}
retval = xfs_attr_node_removename(args, state);
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
/*
* Check to see if the tree needs to be collapsed. If so, roll
* the transacton and fall into the shrink state.
*/
if (retval && (state->path.active > 1)) {
error = xfs_da3_join(state);
if (error)
goto out;
dac->flags |= XFS_DAC_DEFER_FINISH;
dac->dela_state = XFS_DAS_RM_SHRINK;
trace_xfs_attr_remove_iter_return(
dac->dela_state, args->dp);
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
return -EAGAIN;
}
xfs: Fix multiple fall-through warnings for Clang In preparation to enable -Wimplicit-fallthrough for Clang, fix the following warnings by replacing /* fallthrough */ comments, and its variants, with the new pseudo-keyword macro fallthrough: fs/xfs/libxfs/xfs_attr.c:487:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:500:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:532:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:594:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:607:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1410:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1445:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] fs/xfs/libxfs/xfs_attr.c:1473:2: warning: unannotated fall-through between switch labels [-Wimplicit-fallthrough] Notice that Clang doesn't recognize /* fallthrough */ comments as implicit fall-through markings, so in order to globally enable -Wimplicit-fallthrough for Clang, these comments need to be replaced with fallthrough; in the whole codebase. Link: https://github.com/KSPP/linux/issues/115 Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2021-06-15 22:09:14 +08:00
fallthrough;
xfs: Add delay ready attr remove routines This patch modifies the attr remove routines to be delay ready. This means they no longer roll or commit transactions, but instead return -EAGAIN to have the calling routine roll and refresh the transaction. In this series, xfs_attr_remove_args is merged with xfs_attr_node_removename become a new function, xfs_attr_remove_iter. This new version uses a sort of state machine like switch to keep track of where it was when EAGAIN was returned. A new version of xfs_attr_remove_args consists of a simple loop to refresh the transaction until the operation is completed. A new XFS_DAC_DEFER_FINISH flag is used to finish the transaction where ever the existing code used to. Calls to xfs_attr_rmtval_remove are replaced with the delay ready version __xfs_attr_rmtval_remove. We will rename __xfs_attr_rmtval_remove back to xfs_attr_rmtval_remove when we are done. xfs_attr_rmtval_remove itself is still in use by the set routines (used during a rename). For reasons of preserving existing function, we modify xfs_attr_rmtval_remove to call xfs_defer_finish when the flag is set. Similar to how xfs_attr_remove_args does here. Once we transition the set routines to be delay ready, xfs_attr_rmtval_remove is no longer used and will be removed. This patch also adds a new struct xfs_delattr_context, which we will use to keep track of the current state of an attribute operation. The new xfs_delattr_state enum is used to track various operations that are in progress so that we know not to repeat them, and resume where we left off before EAGAIN was returned to cycle out the transaction. Other members take the place of local variables that need to retain their values across multiple function calls. See xfs_attr.h for a more detailed diagram of the states. Signed-off-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Chandan Babu R <chandanrlinux@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org>
2021-04-27 06:00:33 +08:00
case XFS_DAS_RM_SHRINK:
/*
* If the result is small enough, push it all into the inode.
* This is our final state so it's safe to return a dirty
* transaction.
*/
if (xfs_attr_is_leaf(dp))
error = xfs_attr_node_shrink(args, state);
ASSERT(error != -EAGAIN);
break;
default:
ASSERT(0);
error = -EINVAL;
goto out;
}
out:
if (state)
xfs_da_state_free(state);
return error;
}
/*
* Fill in the disk block numbers in the state structure for the buffers
* that are attached to the state structure.
* This is done so that we can quickly reattach ourselves to those buffers
* after some set of transaction commits have released these buffers.
*/
STATIC int
xfs_attr_fillstate(xfs_da_state_t *state)
{
xfs_da_state_path_t *path;
xfs_da_state_blk_t *blk;
int level;
trace_xfs_attr_fillstate(state->args);
/*
* Roll down the "path" in the state structure, storing the on-disk
* block number for those buffers in the "path".
*/
path = &state->path;
ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
for (blk = path->blk, level = 0; level < path->active; blk++, level++) {
if (blk->bp) {
blk->disk_blkno = xfs_buf_daddr(blk->bp);
blk->bp = NULL;
} else {
blk->disk_blkno = 0;
}
}
/*
* Roll down the "altpath" in the state structure, storing the on-disk
* block number for those buffers in the "altpath".
*/
path = &state->altpath;
ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
for (blk = path->blk, level = 0; level < path->active; blk++, level++) {
if (blk->bp) {
blk->disk_blkno = xfs_buf_daddr(blk->bp);
blk->bp = NULL;
} else {
blk->disk_blkno = 0;
}
}
return 0;
}
/*
* Reattach the buffers to the state structure based on the disk block
* numbers stored in the state structure.
* This is done after some set of transaction commits have released those
* buffers from our grip.
*/
STATIC int
xfs_attr_refillstate(xfs_da_state_t *state)
{
xfs_da_state_path_t *path;
xfs_da_state_blk_t *blk;
int level, error;
trace_xfs_attr_refillstate(state->args);
/*
* Roll down the "path" in the state structure, storing the on-disk
* block number for those buffers in the "path".
*/
path = &state->path;
ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
for (blk = path->blk, level = 0; level < path->active; blk++, level++) {
if (blk->disk_blkno) {
error = xfs_da3_node_read_mapped(state->args->trans,
state->args->dp, blk->disk_blkno,
&blk->bp, XFS_ATTR_FORK);
if (error)
return error;
} else {
blk->bp = NULL;
}
}
/*
* Roll down the "altpath" in the state structure, storing the on-disk
* block number for those buffers in the "altpath".
*/
path = &state->altpath;
ASSERT((path->active >= 0) && (path->active < XFS_DA_NODE_MAXDEPTH));
for (blk = path->blk, level = 0; level < path->active; blk++, level++) {
if (blk->disk_blkno) {
error = xfs_da3_node_read_mapped(state->args->trans,
state->args->dp, blk->disk_blkno,
&blk->bp, XFS_ATTR_FORK);
if (error)
return error;
} else {
blk->bp = NULL;
}
}
return 0;
}
/*
* Retrieve the attribute data from a node attribute list.
*
* This routine gets called for any attribute fork that has more than one
* block, ie: both true Btree attr lists and for single-leaf-blocks with
* "remote" values taking up more blocks.
*
* Returns 0 on successful retrieval, otherwise an error.
*/
STATIC int
xfs_attr_node_get(
struct xfs_da_args *args)
{
struct xfs_da_state *state;
struct xfs_da_state_blk *blk;
int i;
int error;
trace_xfs_attr_node_get(args);
/*
* Search to see if name exists, and get back a pointer to it.
*/
error = xfs_attr_node_hasname(args, &state);
if (error != -EEXIST)
goto out_release;
/*
* Get the value, local or "remote"
*/
blk = &state->path.blk[state->path.active - 1];
error = xfs_attr3_leaf_getvalue(blk->bp, args);
/*
* If not in a transaction, we have to release all the buffers.
*/
out_release:
for (i = 0; state != NULL && i < state->path.active; i++) {
xfs_trans_brelse(args->trans, state->path.blk[i].bp);
state->path.blk[i].bp = NULL;
}
if (state)
xfs_da_state_free(state);
return error;
}
/* Returns true if the attribute entry name is valid. */
bool
xfs_attr_namecheck(
const void *name,
size_t length)
{
/*
* MAXNAMELEN includes the trailing null, but (name/length) leave it
* out, so use >= for the length check.
*/
if (length >= MAXNAMELEN)
return false;
/* There shouldn't be any nulls here */
return !memchr(name, 0, length);
}