2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
|
2007-03-04 00:48:53 +08:00
|
|
|
* Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
|
2005-04-17 06:20:36 +08:00
|
|
|
*
|
2006-12-30 08:49:26 +08:00
|
|
|
* This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
|
2005-04-17 06:20:36 +08:00
|
|
|
* but this keeps the ISA-Bridge and slots alive.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/hdreg.h>
|
|
|
|
#include <linux/ide.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
2007-10-20 06:32:35 +08:00
|
|
|
static DEFINE_SPINLOCK(slc90e66_lock);
|
|
|
|
|
ide: move ide_config_drive_speed() calls to upper layers (take 2)
* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16.
* Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program
the host for the transfer mode after programming the device. Set it
in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac
and via82cxxx host drivers.
* Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely
skip programming of host/device for the transfer mode ("smart" hosts).
Set it in it821x host driver and check it in ide_tune_dma().
* Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all
direct ->set_pio_mode/->speedproc users to use these helpers.
* Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc
methods to callers.
* Rename ->speedproc method to ->set_dma_mode, make it void and update
all implementations accordingly.
* Update ide_set_xfer_rate() comments.
* Unexport ide_config_drive_speed().
v2:
* Fix issues noticed by Sergei:
- export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt
to setting DMA modes from sc1200_set_pio_mode() to do_special()
- check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()
- check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode()
- check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode()
- return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL
- don't set ->set_{pio,dma}_mode on it821x in "smart" mode
- fix build problem in pmac.c
- minor fixes in au1xxx-ide.c/cs5530.c/siimage.c
- improve patch description
Changes in behavior caused by this patch:
- HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change
PIO mode if it821x controller is in "smart" mode
- removal of two debugging printk-s (from cs5530.c and sc1200.c)
- transfer modes 0x00-0x07 passed from user space may be programmed twice on
the device (not really an issue since 0x00 is not supported correctly by
any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13 23:47:51 +08:00
|
|
|
static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
ide_hwif_t *hwif = HWIF(drive);
|
2008-02-02 06:09:31 +08:00
|
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
2007-02-08 01:18:34 +08:00
|
|
|
int is_slave = drive->dn & 1;
|
2005-04-17 06:20:36 +08:00
|
|
|
int master_port = hwif->channel ? 0x42 : 0x40;
|
|
|
|
int slave_port = 0x44;
|
|
|
|
unsigned long flags;
|
|
|
|
u16 master_data;
|
|
|
|
u8 slave_data;
|
2007-02-08 01:18:34 +08:00
|
|
|
int control = 0;
|
|
|
|
/* ISP RTC */
|
2006-06-28 19:27:02 +08:00
|
|
|
static const u8 timings[][2]= {
|
2007-02-08 01:18:34 +08:00
|
|
|
{ 0, 0 },
|
|
|
|
{ 0, 0 },
|
|
|
|
{ 1, 0 },
|
|
|
|
{ 2, 1 },
|
|
|
|
{ 2, 3 }, };
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-10-20 06:32:35 +08:00
|
|
|
spin_lock_irqsave(&slc90e66_lock, flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
pci_read_config_word(dev, master_port, &master_data);
|
2007-02-08 01:18:34 +08:00
|
|
|
|
|
|
|
if (pio > 1)
|
|
|
|
control |= 1; /* Programmable timing on */
|
|
|
|
if (drive->media == ide_disk)
|
|
|
|
control |= 4; /* Prefetch, post write */
|
|
|
|
if (pio > 2)
|
|
|
|
control |= 2; /* IORDY */
|
2005-04-17 06:20:36 +08:00
|
|
|
if (is_slave) {
|
2007-02-08 01:18:34 +08:00
|
|
|
master_data |= 0x4000;
|
|
|
|
master_data &= ~0x0070;
|
|
|
|
if (pio > 1) {
|
2007-03-04 00:48:53 +08:00
|
|
|
/* Set PPE, IE and TIME */
|
|
|
|
master_data |= control << 4;
|
2007-02-08 01:18:34 +08:00
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
pci_read_config_byte(dev, slave_port, &slave_data);
|
2007-03-04 00:48:53 +08:00
|
|
|
slave_data &= hwif->channel ? 0x0f : 0xf0;
|
|
|
|
slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
|
|
|
|
(hwif->channel ? 4 : 0);
|
2005-04-17 06:20:36 +08:00
|
|
|
} else {
|
2007-02-08 01:18:34 +08:00
|
|
|
master_data &= ~0x3307;
|
|
|
|
if (pio > 1) {
|
2005-04-17 06:20:36 +08:00
|
|
|
/* enable PPE, IE and TIME */
|
2007-03-04 00:48:53 +08:00
|
|
|
master_data |= control;
|
2007-02-08 01:18:34 +08:00
|
|
|
}
|
2007-03-04 00:48:53 +08:00
|
|
|
master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
pci_write_config_word(dev, master_port, master_data);
|
|
|
|
if (is_slave)
|
|
|
|
pci_write_config_byte(dev, slave_port, slave_data);
|
2007-10-20 06:32:35 +08:00
|
|
|
spin_unlock_irqrestore(&slc90e66_lock, flags);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
ide: move ide_config_drive_speed() calls to upper layers (take 2)
* Convert {ide_hwif_t,ide_pci_device_t}->host_flag to be u16.
* Add IDE_HFLAG_POST_SET_MODE host flag to indicate the need to program
the host for the transfer mode after programming the device. Set it
in au1xxx-ide, amd74xx, cs5530, cs5535, pdc202xx_new, sc1200, pmac
and via82cxxx host drivers.
* Add IDE_HFLAG_NO_SET_MODE host flag to indicate the need to completely
skip programming of host/device for the transfer mode ("smart" hosts).
Set it in it821x host driver and check it in ide_tune_dma().
* Add ide_set_pio_mode()/ide_set_dma_mode() helpers and convert all
direct ->set_pio_mode/->speedproc users to use these helpers.
* Move ide_config_drive_speed() calls from ->set_pio_mode/->speedproc
methods to callers.
* Rename ->speedproc method to ->set_dma_mode, make it void and update
all implementations accordingly.
* Update ide_set_xfer_rate() comments.
* Unexport ide_config_drive_speed().
v2:
* Fix issues noticed by Sergei:
- export ide_set_dma_mode() instead of moving ->set_pio_mode abuse wrt
to setting DMA modes from sc1200_set_pio_mode() to do_special()
- check IDE_HFLAG_NO_SET_MODE in ide_tune_dma()
- check for (hwif->set_pio_mode) == NULL in ide_set_pio_mode()
- check for (hwif->set_dma_mode) == NULL in ide_set_dma_mode()
- return -1 from ide_set_{pio,dma}_mode() if ->set_{pio,dma}_mode == NULL
- don't set ->set_{pio,dma}_mode on it821x in "smart" mode
- fix build problem in pmac.c
- minor fixes in au1xxx-ide.c/cs5530.c/siimage.c
- improve patch description
Changes in behavior caused by this patch:
- HDIO_SET_PIO_MODE ioctl would now return -ENOSYS for attempts to change
PIO mode if it821x controller is in "smart" mode
- removal of two debugging printk-s (from cs5530.c and sc1200.c)
- transfer modes 0x00-0x07 passed from user space may be programmed twice on
the device (not really an issue since 0x00 is not supported correctly by
any host driver ATM, 0x01 is not supported at all and 0x02-0x07 are invalid)
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-13 23:47:51 +08:00
|
|
|
static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
ide_hwif_t *hwif = HWIF(drive);
|
2008-02-02 06:09:31 +08:00
|
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
2005-04-17 06:20:36 +08:00
|
|
|
u8 maslave = hwif->channel ? 0x42 : 0x40;
|
|
|
|
int sitre = 0, a_speed = 7 << (drive->dn * 4);
|
|
|
|
int u_speed = 0, u_flag = 1 << drive->dn;
|
|
|
|
u16 reg4042, reg44, reg48, reg4a;
|
|
|
|
|
|
|
|
pci_read_config_word(dev, maslave, ®4042);
|
|
|
|
sitre = (reg4042 & 0x4000) ? 1 : 0;
|
|
|
|
pci_read_config_word(dev, 0x44, ®44);
|
|
|
|
pci_read_config_word(dev, 0x48, ®48);
|
|
|
|
pci_read_config_word(dev, 0x4a, ®4a);
|
|
|
|
|
|
|
|
if (speed >= XFER_UDMA_0) {
|
2008-01-26 05:17:18 +08:00
|
|
|
u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4);
|
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
if (!(reg48 & u_flag))
|
|
|
|
pci_write_config_word(dev, 0x48, reg48|u_flag);
|
|
|
|
/* FIXME: (reg4a & a_speed) ? */
|
|
|
|
if ((reg4a & u_speed) != u_speed) {
|
|
|
|
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
|
|
|
|
pci_read_config_word(dev, 0x4a, ®4a);
|
|
|
|
pci_write_config_word(dev, 0x4a, reg4a|u_speed);
|
|
|
|
}
|
|
|
|
} else {
|
2007-10-17 04:29:54 +08:00
|
|
|
const u8 mwdma_to_pio[] = { 0, 3, 4 };
|
2007-10-17 04:29:56 +08:00
|
|
|
u8 pio;
|
2007-10-17 04:29:54 +08:00
|
|
|
|
2005-04-17 06:20:36 +08:00
|
|
|
if (reg48 & u_flag)
|
|
|
|
pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
|
|
|
|
if (reg4a & a_speed)
|
|
|
|
pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
|
2007-10-17 04:29:54 +08:00
|
|
|
|
|
|
|
if (speed >= XFER_MW_DMA_0)
|
|
|
|
pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
|
|
|
|
else
|
|
|
|
pio = 2; /* only SWDMA2 is allowed */
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-10-17 04:29:56 +08:00
|
|
|
slc90e66_set_pio_mode(drive, pio);
|
|
|
|
}
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2008-02-03 02:56:31 +08:00
|
|
|
static u8 __devinit slc90e66_cable_detect(ide_hwif_t *hwif)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
2008-02-02 06:09:31 +08:00
|
|
|
struct pci_dev *dev = to_pci_dev(hwif->dev);
|
2008-02-03 02:56:31 +08:00
|
|
|
u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2008-02-02 06:09:31 +08:00
|
|
|
pci_read_config_byte(dev, 0x47, ®47);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2008-02-03 02:56:31 +08:00
|
|
|
/* bit[0(1)]: 0:80, 1:40 */
|
|
|
|
return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __devinit init_hwif_slc90e66(ide_hwif_t *hwif)
|
|
|
|
{
|
|
|
|
hwif->set_pio_mode = &slc90e66_set_pio_mode;
|
|
|
|
hwif->set_dma_mode = &slc90e66_set_dma_mode;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2008-02-03 02:56:31 +08:00
|
|
|
hwif->cable_detect = slc90e66_cable_detect;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
2007-10-20 06:32:34 +08:00
|
|
|
static const struct ide_port_info slc90e66_chipset __devinitdata = {
|
2005-04-17 06:20:36 +08:00
|
|
|
.name = "SLC90E66",
|
|
|
|
.init_hwif = init_hwif_slc90e66,
|
|
|
|
.enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}},
|
2008-04-26 23:36:35 +08:00
|
|
|
.host_flags = IDE_HFLAG_LEGACY_IRQS,
|
2007-07-20 07:11:59 +08:00
|
|
|
.pio_mask = ATA_PIO4,
|
2007-10-19 06:30:07 +08:00
|
|
|
.swdma_mask = ATA_SWDMA2_ONLY,
|
|
|
|
.mwdma_mask = ATA_MWDMA12_ONLY,
|
|
|
|
.udma_mask = ATA_UDMA4,
|
2005-04-17 06:20:36 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
|
|
{
|
|
|
|
return ide_setup_pci_device(dev, &slc90e66_chipset);
|
|
|
|
}
|
|
|
|
|
2007-10-17 04:29:56 +08:00
|
|
|
static const struct pci_device_id slc90e66_pci_tbl[] = {
|
|
|
|
{ PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0 },
|
2005-04-17 06:20:36 +08:00
|
|
|
{ 0, },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl);
|
|
|
|
|
|
|
|
static struct pci_driver driver = {
|
|
|
|
.name = "SLC90e66_IDE",
|
|
|
|
.id_table = slc90e66_pci_tbl,
|
|
|
|
.probe = slc90e66_init_one,
|
|
|
|
};
|
|
|
|
|
2007-01-27 20:46:56 +08:00
|
|
|
static int __init slc90e66_ide_init(void)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
return ide_pci_register_driver(&driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(slc90e66_ide_init);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Andre Hedrick");
|
|
|
|
MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE");
|
|
|
|
MODULE_LICENSE("GPL");
|