OpenCloudOS-Kernel/arch/x86/include/asm/atomic64_32.h

336 lines
8.0 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _ASM_X86_ATOMIC64_32_H
#define _ASM_X86_ATOMIC64_32_H
#include <linux/compiler.h>
#include <linux/types.h>
//#include <asm/cmpxchg.h>
/* An 64bit atomic type */
typedef struct {
u64 __aligned(8) counter;
} atomic64_t;
#define ATOMIC64_INIT(val) { (val) }
2012-01-21 00:21:41 +08:00
#define __ATOMIC64_DECL(sym) void atomic64_##sym(atomic64_t *, ...)
#ifndef ATOMIC64_EXPORT
#define ATOMIC64_DECL_ONE __ATOMIC64_DECL
#else
#define ATOMIC64_DECL_ONE(sym) __ATOMIC64_DECL(sym); \
ATOMIC64_EXPORT(atomic64_##sym)
#endif
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
#ifdef CONFIG_X86_CMPXCHG64
2012-01-21 00:21:41 +08:00
#define __alternative_atomic64(f, g, out, in...) \
asm volatile("call %P[func]" \
: out : [func] "i" (atomic64_##g##_cx8), ## in)
#define ATOMIC64_DECL(sym) ATOMIC64_DECL_ONE(sym##_cx8)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
#else
2012-01-21 00:21:41 +08:00
#define __alternative_atomic64(f, g, out, in...) \
alternative_call(atomic64_##f##_386, atomic64_##g##_cx8, \
X86_FEATURE_CX8, ASM_OUTPUT2(out), ## in)
#define ATOMIC64_DECL(sym) ATOMIC64_DECL_ONE(sym##_cx8); \
ATOMIC64_DECL_ONE(sym##_386)
ATOMIC64_DECL_ONE(add_386);
ATOMIC64_DECL_ONE(sub_386);
ATOMIC64_DECL_ONE(inc_386);
ATOMIC64_DECL_ONE(dec_386);
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
#endif
2012-01-21 00:21:41 +08:00
#define alternative_atomic64(f, out, in...) \
__alternative_atomic64(f, f, ASM_OUTPUT2(out), ## in)
ATOMIC64_DECL(read);
ATOMIC64_DECL(set);
ATOMIC64_DECL(xchg);
ATOMIC64_DECL(add_return);
ATOMIC64_DECL(sub_return);
ATOMIC64_DECL(inc_return);
ATOMIC64_DECL(dec_return);
ATOMIC64_DECL(dec_if_positive);
ATOMIC64_DECL(inc_not_zero);
ATOMIC64_DECL(add_unless);
#undef ATOMIC64_DECL
#undef ATOMIC64_DECL_ONE
#undef __ATOMIC64_DECL
#undef ATOMIC64_EXPORT
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
/**
* arch_atomic64_cmpxchg - cmpxchg atomic64 variable
* @v: pointer to type atomic64_t
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @o: expected value
* @n: new value
*
* Atomically sets @v to @n if it was equal to @o and returns
* the old value.
*/
static inline long long arch_atomic64_cmpxchg(atomic64_t *v, long long o,
long long n)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
return arch_cmpxchg64(&v->counter, o, n);
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
}
/**
* arch_atomic64_xchg - xchg atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer to type atomic64_t
* @n: value to assign
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically xchgs the value of @v to @n and returns
* the old value.
*/
static inline long long arch_atomic64_xchg(atomic64_t *v, long long n)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
long long o;
unsigned high = (unsigned)(n >> 32);
unsigned low = (unsigned)n;
2012-01-21 00:21:41 +08:00
alternative_atomic64(xchg, "=&A" (o),
"S" (v), "b" (low), "c" (high)
: "memory");
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return o;
}
/**
* arch_atomic64_set - set atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer to type atomic64_t
* @i: value to assign
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically sets the value of @v to @n.
*/
static inline void arch_atomic64_set(atomic64_t *v, long long i)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
unsigned high = (unsigned)(i >> 32);
unsigned low = (unsigned)i;
2012-01-21 00:21:41 +08:00
alternative_atomic64(set, /* no output */,
"S" (v), "b" (low), "c" (high)
: "eax", "edx", "memory");
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
}
/**
* arch_atomic64_read - read atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically reads the value of @v and returns it.
*/
static inline long long arch_atomic64_read(const atomic64_t *v)
{
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
long long r;
2012-01-21 00:21:41 +08:00
alternative_atomic64(read, "=&A" (r), "c" (v) : "memory");
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return r;
}
/**
* arch_atomic64_add_return - add and return
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @i: integer value to add
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically adds @i to @v and returns @i + *@v
*/
static inline long long arch_atomic64_add_return(long long i, atomic64_t *v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
2012-01-21 00:21:41 +08:00
alternative_atomic64(add_return,
ASM_OUTPUT2("+A" (i), "+c" (v)),
ASM_NO_INPUT_CLOBBER("memory"));
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return i;
}
/*
* Other variants with different arithmetic operators:
*/
static inline long long arch_atomic64_sub_return(long long i, atomic64_t *v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
2012-01-21 00:21:41 +08:00
alternative_atomic64(sub_return,
ASM_OUTPUT2("+A" (i), "+c" (v)),
ASM_NO_INPUT_CLOBBER("memory"));
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return i;
}
static inline long long arch_atomic64_inc_return(atomic64_t *v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
long long a;
2012-01-21 00:21:41 +08:00
alternative_atomic64(inc_return, "=&A" (a),
"S" (v) : "memory", "ecx");
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return a;
}
#define arch_atomic64_inc_return arch_atomic64_inc_return
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline long long arch_atomic64_dec_return(atomic64_t *v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
long long a;
2012-01-21 00:21:41 +08:00
alternative_atomic64(dec_return, "=&A" (a),
"S" (v) : "memory", "ecx");
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return a;
}
#define arch_atomic64_dec_return arch_atomic64_dec_return
/**
* arch_atomic64_add - add integer to atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @i: integer value to add
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically adds @i to @v.
*/
static inline long long arch_atomic64_add(long long i, atomic64_t *v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
2012-01-21 00:21:41 +08:00
__alternative_atomic64(add, add_return,
ASM_OUTPUT2("+A" (i), "+c" (v)),
ASM_NO_INPUT_CLOBBER("memory"));
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return i;
}
/**
* arch_atomic64_sub - subtract the atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @i: integer value to subtract
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically subtracts @i from @v.
*/
static inline long long arch_atomic64_sub(long long i, atomic64_t *v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
2012-01-21 00:21:41 +08:00
__alternative_atomic64(sub, sub_return,
ASM_OUTPUT2("+A" (i), "+c" (v)),
ASM_NO_INPUT_CLOBBER("memory"));
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return i;
}
/**
* arch_atomic64_inc - increment atomic64 variable
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer to type atomic64_t
*
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* Atomically increments @v by 1.
*/
static inline void arch_atomic64_inc(atomic64_t *v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
2012-01-21 00:21:41 +08:00
__alternative_atomic64(inc, inc_return, /* no output */,
"S" (v) : "memory", "eax", "ecx", "edx");
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
}
x86: Fix kernel-doc atomic.h warnings Fix kernel-doc warnings in arch/x86/include/asm/atomic.h that are caused by having a #define macro between the kernel-doc notation and the function name. Fixed by moving the #define macro to after the function implementation. Make the same change for atomic64_{32,64}.h for consistency even though there were no kernel-doc warnings found in these header files, but there would be if they were used in generation of documentation. Fixes these kernel-doc warnings: ../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'i' description in 'arch_atomic_sub_and_test' ../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'v' description in 'arch_atomic_sub_and_test' ../arch/x86/include/asm/atomic.h:96: warning: Excess function parameter 'v' description in 'arch_atomic_inc' ../arch/x86/include/asm/atomic.h:109: warning: Excess function parameter 'v' description in 'arch_atomic_dec' ../arch/x86/include/asm/atomic.h:124: warning: Excess function parameter 'v' description in 'arch_atomic_dec_and_test' ../arch/x86/include/asm/atomic.h:138: warning: Excess function parameter 'v' description in 'arch_atomic_inc_and_test' ../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'i' description in 'arch_atomic_add_negative' ../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'v' description in 'arch_atomic_add_negative' Fixes: 18cc1814d4e7 ("atomics/treewide: Make test ops optional") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/0a1e678d-c8c5-b32c-2640-ed4e94d399d2@infradead.org
2018-09-03 10:30:53 +08:00
#define arch_atomic64_inc arch_atomic64_inc
/**
* arch_atomic64_dec - decrement atomic64 variable
* @v: pointer to type atomic64_t
*
* Atomically decrements @v by 1.
*/
static inline void arch_atomic64_dec(atomic64_t *v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
2012-01-21 00:21:41 +08:00
__alternative_atomic64(dec, dec_return, /* no output */,
"S" (v) : "memory", "eax", "ecx", "edx");
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
}
x86: Fix kernel-doc atomic.h warnings Fix kernel-doc warnings in arch/x86/include/asm/atomic.h that are caused by having a #define macro between the kernel-doc notation and the function name. Fixed by moving the #define macro to after the function implementation. Make the same change for atomic64_{32,64}.h for consistency even though there were no kernel-doc warnings found in these header files, but there would be if they were used in generation of documentation. Fixes these kernel-doc warnings: ../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'i' description in 'arch_atomic_sub_and_test' ../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'v' description in 'arch_atomic_sub_and_test' ../arch/x86/include/asm/atomic.h:96: warning: Excess function parameter 'v' description in 'arch_atomic_inc' ../arch/x86/include/asm/atomic.h:109: warning: Excess function parameter 'v' description in 'arch_atomic_dec' ../arch/x86/include/asm/atomic.h:124: warning: Excess function parameter 'v' description in 'arch_atomic_dec_and_test' ../arch/x86/include/asm/atomic.h:138: warning: Excess function parameter 'v' description in 'arch_atomic_inc_and_test' ../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'i' description in 'arch_atomic_add_negative' ../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'v' description in 'arch_atomic_add_negative' Fixes: 18cc1814d4e7 ("atomics/treewide: Make test ops optional") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/0a1e678d-c8c5-b32c-2640-ed4e94d399d2@infradead.org
2018-09-03 10:30:53 +08:00
#define arch_atomic64_dec arch_atomic64_dec
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
/**
* arch_atomic64_add_unless - add unless the number is a given value
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
* @v: pointer of type atomic64_t
* @a: the amount to add to v...
* @u: ...unless v is equal to u.
*
* Atomically adds @a to @v, so long as it was not @u.
2012-01-21 00:21:41 +08:00
* Returns non-zero if the add was done, zero otherwise.
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
*/
static inline int arch_atomic64_add_unless(atomic64_t *v, long long a,
long long u)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
unsigned low = (unsigned)u;
unsigned high = (unsigned)(u >> 32);
2012-01-21 00:21:41 +08:00
alternative_atomic64(add_unless,
ASM_OUTPUT2("+A" (a), "+c" (low), "+D" (high)),
"S" (v) : "memory");
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return (int)a;
}
static inline int arch_atomic64_inc_not_zero(atomic64_t *v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
int r;
2012-01-21 00:21:41 +08:00
alternative_atomic64(inc_not_zero, "=&a" (r),
"S" (v) : "ecx", "edx", "memory");
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return r;
}
x86: Fix kernel-doc atomic.h warnings Fix kernel-doc warnings in arch/x86/include/asm/atomic.h that are caused by having a #define macro between the kernel-doc notation and the function name. Fixed by moving the #define macro to after the function implementation. Make the same change for atomic64_{32,64}.h for consistency even though there were no kernel-doc warnings found in these header files, but there would be if they were used in generation of documentation. Fixes these kernel-doc warnings: ../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'i' description in 'arch_atomic_sub_and_test' ../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'v' description in 'arch_atomic_sub_and_test' ../arch/x86/include/asm/atomic.h:96: warning: Excess function parameter 'v' description in 'arch_atomic_inc' ../arch/x86/include/asm/atomic.h:109: warning: Excess function parameter 'v' description in 'arch_atomic_dec' ../arch/x86/include/asm/atomic.h:124: warning: Excess function parameter 'v' description in 'arch_atomic_dec_and_test' ../arch/x86/include/asm/atomic.h:138: warning: Excess function parameter 'v' description in 'arch_atomic_inc_and_test' ../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'i' description in 'arch_atomic_add_negative' ../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'v' description in 'arch_atomic_add_negative' Fixes: 18cc1814d4e7 ("atomics/treewide: Make test ops optional") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/0a1e678d-c8c5-b32c-2640-ed4e94d399d2@infradead.org
2018-09-03 10:30:53 +08:00
#define arch_atomic64_inc_not_zero arch_atomic64_inc_not_zero
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
static inline long long arch_atomic64_dec_if_positive(atomic64_t *v)
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
{
long long r;
2012-01-21 00:21:41 +08:00
alternative_atomic64(dec_if_positive, "=&A" (r),
"S" (v) : "ecx", "memory");
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
return r;
}
x86: Fix kernel-doc atomic.h warnings Fix kernel-doc warnings in arch/x86/include/asm/atomic.h that are caused by having a #define macro between the kernel-doc notation and the function name. Fixed by moving the #define macro to after the function implementation. Make the same change for atomic64_{32,64}.h for consistency even though there were no kernel-doc warnings found in these header files, but there would be if they were used in generation of documentation. Fixes these kernel-doc warnings: ../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'i' description in 'arch_atomic_sub_and_test' ../arch/x86/include/asm/atomic.h:84: warning: Excess function parameter 'v' description in 'arch_atomic_sub_and_test' ../arch/x86/include/asm/atomic.h:96: warning: Excess function parameter 'v' description in 'arch_atomic_inc' ../arch/x86/include/asm/atomic.h:109: warning: Excess function parameter 'v' description in 'arch_atomic_dec' ../arch/x86/include/asm/atomic.h:124: warning: Excess function parameter 'v' description in 'arch_atomic_dec_and_test' ../arch/x86/include/asm/atomic.h:138: warning: Excess function parameter 'v' description in 'arch_atomic_inc_and_test' ../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'i' description in 'arch_atomic_add_negative' ../arch/x86/include/asm/atomic.h:153: warning: Excess function parameter 'v' description in 'arch_atomic_add_negative' Fixes: 18cc1814d4e7 ("atomics/treewide: Make test ops optional") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Rutland <mark.rutland@arm.com> Link: https://lkml.kernel.org/r/0a1e678d-c8c5-b32c-2640-ed4e94d399d2@infradead.org
2018-09-03 10:30:53 +08:00
#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
x86-32: Rewrite 32-bit atomic64 functions in assembly This patch replaces atomic64_32.c with two assembly implementations, one for 386/486 machines using pushf/cli/popf and one for 586+ machines using cmpxchg8b. The cmpxchg8b implementation provides the following advantages over the current one: 1. Implements atomic64_add_unless, atomic64_dec_if_positive and atomic64_inc_not_zero 2. Uses the ZF flag changed by cmpxchg8b instead of doing a comparison 3. Uses custom register calling conventions that reduce or eliminate register moves to suit cmpxchg8b 4. Reads the initial value instead of using cmpxchg8b to do that. Currently we use lock xaddl and movl, which seems the fastest. 5. Does not use the lock prefix for atomic64_set 64-bit writes are already atomic, so we don't need that. We still need it for atomic64_read to avoid restoring a value changed in the meantime. 6. Allocates registers as well or better than gcc The 386 implementation provides support for 386 and 486 machines. 386/486 SMP is not supported (we dropped it), but such support can be added easily if desired. A pure assembly implementation is required due to the custom calling conventions, and desire to use %ebp in atomic64_add_return (we need 7 registers...), as well as the ability to use pushf/popf in the 386 code without an intermediate pop/push. The parameter names are changed to match the convention in atomic_64.h Changes in v3 (due to rebasing to tip/x86/asm): - Patches atomic64_32.h instead of atomic_32.h - Uses the CALL alternative mechanism from commit 1b1d9258181bae199dc940f4bd0298126b9a73d9 Changes in v2: - Merged 386 and cx8 support in the same patch - 386 support now done in assembly, C code no longer used at all - cmpxchg64 is used for atomic64_cmpxchg - stop using macros, use one-line inline functions instead - miscellanous changes and improvements Signed-off-by: Luca Barbieri <luca@luca-barbieri.com> LKML-Reference: <1267005265-27958-5-git-send-email-luca@luca-barbieri.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24 17:54:25 +08:00
2012-01-21 00:21:41 +08:00
#undef alternative_atomic64
#undef __alternative_atomic64
static inline void arch_atomic64_and(long long i, atomic64_t *v)
{
long long old, c = 0;
while ((old = arch_atomic64_cmpxchg(v, c, c & i)) != c)
c = old;
}
static inline long long arch_atomic64_fetch_and(long long i, atomic64_t *v)
{
long long old, c = 0;
while ((old = arch_atomic64_cmpxchg(v, c, c & i)) != c)
c = old;
return old;
}
static inline void arch_atomic64_or(long long i, atomic64_t *v)
{
long long old, c = 0;
while ((old = arch_atomic64_cmpxchg(v, c, c | i)) != c)
c = old;
}
static inline long long arch_atomic64_fetch_or(long long i, atomic64_t *v)
{
long long old, c = 0;
while ((old = arch_atomic64_cmpxchg(v, c, c | i)) != c)
c = old;
return old;
}
static inline void arch_atomic64_xor(long long i, atomic64_t *v)
{
long long old, c = 0;
while ((old = arch_atomic64_cmpxchg(v, c, c ^ i)) != c)
c = old;
}
static inline long long arch_atomic64_fetch_xor(long long i, atomic64_t *v)
{
long long old, c = 0;
while ((old = arch_atomic64_cmpxchg(v, c, c ^ i)) != c)
c = old;
return old;
}
static inline long long arch_atomic64_fetch_add(long long i, atomic64_t *v)
{
long long old, c = 0;
while ((old = arch_atomic64_cmpxchg(v, c, c + i)) != c)
c = old;
return old;
}
#define arch_atomic64_fetch_sub(i, v) arch_atomic64_fetch_add(-(i), (v))
#endif /* _ASM_X86_ATOMIC64_32_H */