OpenCloudOS-Kernel/drivers/infiniband/hw/cxgb3/iwch_provider.h

361 lines
9.3 KiB
C
Raw Normal View History

/*
* Copyright (c) 2006 Chelsio, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef __IWCH_PROVIDER_H__
#define __IWCH_PROVIDER_H__
#include <linux/list.h>
#include <linux/spinlock.h>
#include <rdma/ib_verbs.h>
#include <asm/types.h>
#include "t3cdev.h"
#include "iwch.h"
#include "cxio_wr.h"
#include "cxio_hal.h"
struct iwch_pd {
struct ib_pd ibpd;
u32 pdid;
struct iwch_dev *rhp;
};
static inline struct iwch_pd *to_iwch_pd(struct ib_pd *ibpd)
{
return container_of(ibpd, struct iwch_pd, ibpd);
}
struct tpt_attributes {
u32 stag;
u32 state:1;
u32 type:2;
u32 rsvd:1;
enum tpt_mem_perm perms;
u32 remote_invaliate_disable:1;
u32 zbva:1;
u32 mw_bind_enable:1;
u32 page_size:5;
u32 pdid;
u32 qpid;
u32 pbl_addr;
u32 len;
u64 va_fbo;
u32 pbl_size;
};
struct iwch_mr {
struct ib_mr ibmr;
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 08:15:11 +08:00
struct ib_umem *umem;
struct iwch_dev *rhp;
u64 kva;
struct tpt_attributes attr;
};
typedef struct iwch_mw iwch_mw_handle;
static inline struct iwch_mr *to_iwch_mr(struct ib_mr *ibmr)
{
return container_of(ibmr, struct iwch_mr, ibmr);
}
struct iwch_mw {
struct ib_mw ibmw;
struct iwch_dev *rhp;
u64 kva;
struct tpt_attributes attr;
};
static inline struct iwch_mw *to_iwch_mw(struct ib_mw *ibmw)
{
return container_of(ibmw, struct iwch_mw, ibmw);
}
struct iwch_cq {
struct ib_cq ibcq;
struct iwch_dev *rhp;
struct t3_cq cq;
spinlock_t lock;
spinlock_t comp_handler_lock;
atomic_t refcnt;
wait_queue_head_t wait;
u32 __user *user_rptr_addr;
};
static inline struct iwch_cq *to_iwch_cq(struct ib_cq *ibcq)
{
return container_of(ibcq, struct iwch_cq, ibcq);
}
enum IWCH_QP_FLAGS {
QP_QUIESCED = 0x01
};
struct iwch_mpa_attributes {
RDMA/cxgb3: Support peer-2-peer connection setup Open MPI, Intel MPI and other applications don't respect the iWARP requirement that the client (active) side of the connection send the first RDMA message. This class of application connection setup is called peer-to-peer. Typically once the connection is setup, _both_ sides want to send data. This patch enables supporting peer-to-peer over the chelsio RNIC by enforcing this iWARP requirement in the driver itself as part of RDMA connection setup. Connection setup is extended, when the peer2peer module option is 1, such that the MPA initiator will send a 0B Read (the RTR) just after connection setup. The MPA responder will suspend SQ processing until the RTR message is received and reply-to. In the longer term, this will be handled in a standardized way by enhancing the MPA negotiation so peers can indicate whether they want/need the RTR and what type of RTR (0B read, 0B write, or 0B send) should be sent. This will be done by standardizing a few bits of the private data in order to negotiate all this. However this patch enables peer-to-peer applications now and allows most of the required firmware and driver changes to be done and tested now. Design: - Add a module option, peer2peer, to enable this mode. - New firmware support for peer-to-peer mode: - a new bit in the rdma_init WR to tell it to do peer-2-peer and what form of RTR message to send or expect. - process _all_ preposted recvs before moving the connection into rdma mode. - passive side: defer completing the rdma_init WR until all pre-posted recvs are processed. Suspend SQ processing until the RTR is received. - active side: expect and process the 0B read WR on offload TX queue. Defer completing the rdma_init WR until all pre-posted recvs are processed. Suspend SQ processing until the 0B read WR is processed from the offload TX queue. - If peer2peer is set, driver posts 0B read request on offload TX queue just after posting the rdma_init WR to the offload TX queue. - Add CQ poll logic to ignore unsolicitied read responses. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-30 04:46:52 +08:00
u8 initiator;
u8 recv_marker_enabled;
u8 xmit_marker_enabled; /* iWARP: enable inbound Read Resp. */
u8 crc_enabled;
u8 version; /* 0 or 1 */
};
struct iwch_qp_attributes {
u32 scq;
u32 rcq;
u32 sq_num_entries;
u32 rq_num_entries;
u32 sq_max_sges;
u32 sq_max_sges_rdma_write;
u32 rq_max_sges;
u32 state;
u8 enable_rdma_read;
u8 enable_rdma_write; /* enable inbound Read Resp. */
u8 enable_bind;
u8 enable_mmid0_fastreg; /* Enable STAG0 + Fast-register */
/*
* Next QP state. If specify the current state, only the
* QP attributes will be modified.
*/
u32 max_ord;
u32 max_ird;
u32 pd; /* IN */
u32 next_state;
char terminate_buffer[52];
u32 terminate_msg_len;
u8 is_terminate_local;
struct iwch_mpa_attributes mpa_attr; /* IN-OUT */
struct iwch_ep *llp_stream_handle;
char *stream_msg_buf; /* Last stream msg. before Idle -> RTS */
u32 stream_msg_buf_len; /* Only on Idle -> RTS */
};
struct iwch_qp {
struct ib_qp ibqp;
struct iwch_dev *rhp;
struct iwch_ep *ep;
struct iwch_qp_attributes attr;
struct t3_wq wq;
spinlock_t lock;
atomic_t refcnt;
wait_queue_head_t wait;
enum IWCH_QP_FLAGS flags;
struct timer_list timer;
};
static inline int qp_quiesced(struct iwch_qp *qhp)
{
return qhp->flags & QP_QUIESCED;
}
static inline struct iwch_qp *to_iwch_qp(struct ib_qp *ibqp)
{
return container_of(ibqp, struct iwch_qp, ibqp);
}
void iwch_qp_add_ref(struct ib_qp *qp);
void iwch_qp_rem_ref(struct ib_qp *qp);
struct iwch_ucontext {
struct ib_ucontext ibucontext;
struct cxio_ucontext uctx;
u32 key;
spinlock_t mmap_lock;
struct list_head mmaps;
};
static inline struct iwch_ucontext *to_iwch_ucontext(struct ib_ucontext *c)
{
return container_of(c, struct iwch_ucontext, ibucontext);
}
struct iwch_mm_entry {
struct list_head entry;
u64 addr;
u32 key;
unsigned len;
};
static inline struct iwch_mm_entry *remove_mmap(struct iwch_ucontext *ucontext,
u32 key, unsigned len)
{
struct list_head *pos, *nxt;
struct iwch_mm_entry *mm;
spin_lock(&ucontext->mmap_lock);
list_for_each_safe(pos, nxt, &ucontext->mmaps) {
mm = list_entry(pos, struct iwch_mm_entry, entry);
if (mm->key == key && mm->len == len) {
list_del_init(&mm->entry);
spin_unlock(&ucontext->mmap_lock);
PDBG("%s key 0x%x addr 0x%llx len %d\n", __func__,
key, (unsigned long long) mm->addr, mm->len);
return mm;
}
}
spin_unlock(&ucontext->mmap_lock);
return NULL;
}
static inline void insert_mmap(struct iwch_ucontext *ucontext,
struct iwch_mm_entry *mm)
{
spin_lock(&ucontext->mmap_lock);
PDBG("%s key 0x%x addr 0x%llx len %d\n", __func__,
mm->key, (unsigned long long) mm->addr, mm->len);
list_add_tail(&mm->entry, &ucontext->mmaps);
spin_unlock(&ucontext->mmap_lock);
}
enum iwch_qp_attr_mask {
IWCH_QP_ATTR_NEXT_STATE = 1 << 0,
IWCH_QP_ATTR_ENABLE_RDMA_READ = 1 << 7,
IWCH_QP_ATTR_ENABLE_RDMA_WRITE = 1 << 8,
IWCH_QP_ATTR_ENABLE_RDMA_BIND = 1 << 9,
IWCH_QP_ATTR_MAX_ORD = 1 << 11,
IWCH_QP_ATTR_MAX_IRD = 1 << 12,
IWCH_QP_ATTR_LLP_STREAM_HANDLE = 1 << 22,
IWCH_QP_ATTR_STREAM_MSG_BUFFER = 1 << 23,
IWCH_QP_ATTR_MPA_ATTR = 1 << 24,
IWCH_QP_ATTR_QP_CONTEXT_ACTIVATE = 1 << 25,
IWCH_QP_ATTR_VALID_MODIFY = (IWCH_QP_ATTR_ENABLE_RDMA_READ |
IWCH_QP_ATTR_ENABLE_RDMA_WRITE |
IWCH_QP_ATTR_MAX_ORD |
IWCH_QP_ATTR_MAX_IRD |
IWCH_QP_ATTR_LLP_STREAM_HANDLE |
IWCH_QP_ATTR_STREAM_MSG_BUFFER |
IWCH_QP_ATTR_MPA_ATTR |
IWCH_QP_ATTR_QP_CONTEXT_ACTIVATE)
};
int iwch_modify_qp(struct iwch_dev *rhp,
struct iwch_qp *qhp,
enum iwch_qp_attr_mask mask,
struct iwch_qp_attributes *attrs,
int internal);
enum iwch_qp_state {
IWCH_QP_STATE_IDLE,
IWCH_QP_STATE_RTS,
IWCH_QP_STATE_ERROR,
IWCH_QP_STATE_TERMINATE,
IWCH_QP_STATE_CLOSING,
IWCH_QP_STATE_TOT
};
static inline int iwch_convert_state(enum ib_qp_state ib_state)
{
switch (ib_state) {
case IB_QPS_RESET:
case IB_QPS_INIT:
return IWCH_QP_STATE_IDLE;
case IB_QPS_RTS:
return IWCH_QP_STATE_RTS;
case IB_QPS_SQD:
return IWCH_QP_STATE_CLOSING;
case IB_QPS_SQE:
return IWCH_QP_STATE_TERMINATE;
case IB_QPS_ERR:
return IWCH_QP_STATE_ERROR;
default:
return -1;
}
}
static inline u32 iwch_ib_to_tpt_access(int acc)
{
return (acc & IB_ACCESS_REMOTE_WRITE ? TPT_REMOTE_WRITE : 0) |
(acc & IB_ACCESS_REMOTE_READ ? TPT_REMOTE_READ : 0) |
(acc & IB_ACCESS_LOCAL_WRITE ? TPT_LOCAL_WRITE : 0) |
(acc & IB_ACCESS_MW_BIND ? TPT_MW_BIND : 0) |
TPT_LOCAL_READ;
}
static inline u32 iwch_ib_to_tpt_bind_access(int acc)
{
return (acc & IB_ACCESS_REMOTE_WRITE ? TPT_REMOTE_WRITE : 0) |
(acc & IB_ACCESS_REMOTE_READ ? TPT_REMOTE_READ : 0);
}
enum iwch_mmid_state {
IWCH_STAG_STATE_VALID,
IWCH_STAG_STATE_INVALID
};
enum iwch_qp_query_flags {
IWCH_QP_QUERY_CONTEXT_NONE = 0x0, /* No ctx; Only attrs */
IWCH_QP_QUERY_CONTEXT_GET = 0x1, /* Get ctx + attrs */
IWCH_QP_QUERY_CONTEXT_SUSPEND = 0x2, /* Not Supported */
/*
* Quiesce QP context; Consumer
* will NOT replay outstanding WR
*/
IWCH_QP_QUERY_CONTEXT_QUIESCE = 0x4,
IWCH_QP_QUERY_CONTEXT_REMOVE = 0x8,
IWCH_QP_QUERY_TEST_USERWRITE = 0x32 /* Test special */
};
RDMA/cxgb3: Support peer-2-peer connection setup Open MPI, Intel MPI and other applications don't respect the iWARP requirement that the client (active) side of the connection send the first RDMA message. This class of application connection setup is called peer-to-peer. Typically once the connection is setup, _both_ sides want to send data. This patch enables supporting peer-to-peer over the chelsio RNIC by enforcing this iWARP requirement in the driver itself as part of RDMA connection setup. Connection setup is extended, when the peer2peer module option is 1, such that the MPA initiator will send a 0B Read (the RTR) just after connection setup. The MPA responder will suspend SQ processing until the RTR message is received and reply-to. In the longer term, this will be handled in a standardized way by enhancing the MPA negotiation so peers can indicate whether they want/need the RTR and what type of RTR (0B read, 0B write, or 0B send) should be sent. This will be done by standardizing a few bits of the private data in order to negotiate all this. However this patch enables peer-to-peer applications now and allows most of the required firmware and driver changes to be done and tested now. Design: - Add a module option, peer2peer, to enable this mode. - New firmware support for peer-to-peer mode: - a new bit in the rdma_init WR to tell it to do peer-2-peer and what form of RTR message to send or expect. - process _all_ preposted recvs before moving the connection into rdma mode. - passive side: defer completing the rdma_init WR until all pre-posted recvs are processed. Suspend SQ processing until the RTR is received. - active side: expect and process the 0B read WR on offload TX queue. Defer completing the rdma_init WR until all pre-posted recvs are processed. Suspend SQ processing until the 0B read WR is processed from the offload TX queue. - If peer2peer is set, driver posts 0B read request on offload TX queue just after posting the rdma_init WR to the offload TX queue. - Add CQ poll logic to ignore unsolicitied read responses. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-04-30 04:46:52 +08:00
u16 iwch_rqes_posted(struct iwch_qp *qhp);
int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
struct ib_send_wr **bad_wr);
int iwch_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
struct ib_recv_wr **bad_wr);
int iwch_bind_mw(struct ib_qp *qp,
struct ib_mw *mw,
struct ib_mw_bind *mw_bind);
int iwch_poll_cq(struct ib_cq *ibcq, int num_entries, struct ib_wc *wc);
int iwch_post_terminate(struct iwch_qp *qhp, struct respQ_msg_t *rsp_msg);
int iwch_post_zb_read(struct iwch_ep *ep);
int iwch_register_device(struct iwch_dev *dev);
void iwch_unregister_device(struct iwch_dev *dev);
void stop_read_rep_timer(struct iwch_qp *qhp);
int iwch_register_mem(struct iwch_dev *rhp, struct iwch_pd *php,
struct iwch_mr *mhp, int shift);
int iwch_reregister_mem(struct iwch_dev *rhp, struct iwch_pd *php,
struct iwch_mr *mhp,
int shift,
int npages);
int iwch_alloc_pbl(struct iwch_mr *mhp, int npages);
void iwch_free_pbl(struct iwch_mr *mhp);
int iwch_write_pbl(struct iwch_mr *mhp, __be64 *pages, int npages, int offset);
int build_phys_page_list(struct ib_phys_buf *buffer_list,
int num_phys_buf,
u64 *iova_start,
u64 *total_size,
int *npages,
int *shift,
__be64 **page_list);
#define IWCH_NODE_DESC "cxgb3 Chelsio Communications"
#endif