OpenCloudOS-Kernel/fs/overlayfs/file.c

724 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2017 Red Hat, Inc.
*/
#include <linux/cred.h>
#include <linux/file.h>
#include <linux/mount.h>
#include <linux/xattr.h>
#include <linux/uio.h>
#include <linux/uaccess.h>
#include <linux/splice.h>
#include <linux/security.h>
#include <linux/mm.h>
#include <linux/fs.h>
#include "overlayfs.h"
struct ovl_aio_req {
struct kiocb iocb;
struct kiocb *orig_iocb;
struct fd fd;
};
static struct kmem_cache *ovl_aio_request_cachep;
static char ovl_whatisit(struct inode *inode, struct inode *realinode)
{
if (realinode != ovl_inode_upper(inode))
return 'l';
if (ovl_has_upperdata(inode))
return 'u';
else
return 'm';
}
/* No atime modificaton nor notify on underlying */
#define OVL_OPEN_FLAGS (O_NOATIME | FMODE_NONOTIFY)
static struct file *ovl_open_realfile(const struct file *file,
struct inode *realinode)
{
struct inode *inode = file_inode(file);
struct file *realfile;
const struct cred *old_cred;
int flags = file->f_flags | OVL_OPEN_FLAGS;
int acc_mode = ACC_MODE(flags);
int err;
if (flags & O_APPEND)
acc_mode |= MAY_APPEND;
old_cred = ovl_override_creds(inode->i_sb);
err = inode_permission(realinode, MAY_OPEN | acc_mode);
if (err) {
realfile = ERR_PTR(err);
} else {
if (!inode_owner_or_capable(realinode))
flags &= ~O_NOATIME;
realfile = open_with_fake_path(&file->f_path, flags, realinode,
current_cred());
}
revert_creds(old_cred);
pr_debug("open(%p[%pD2/%c], 0%o) -> (%p, 0%o)\n",
file, file, ovl_whatisit(inode, realinode), file->f_flags,
realfile, IS_ERR(realfile) ? 0 : realfile->f_flags);
return realfile;
}
#define OVL_SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT)
static int ovl_change_flags(struct file *file, unsigned int flags)
{
struct inode *inode = file_inode(file);
int err;
flags &= OVL_SETFL_MASK;
if (((flags ^ file->f_flags) & O_APPEND) && IS_APPEND(inode))
return -EPERM;
if (flags & O_DIRECT) {
if (!file->f_mapping->a_ops ||
!file->f_mapping->a_ops->direct_IO)
return -EINVAL;
}
if (file->f_op->check_flags) {
err = file->f_op->check_flags(flags);
if (err)
return err;
}
spin_lock(&file->f_lock);
file->f_flags = (file->f_flags & ~OVL_SETFL_MASK) | flags;
spin_unlock(&file->f_lock);
return 0;
}
static int ovl_real_fdget_meta(const struct file *file, struct fd *real,
bool allow_meta)
{
struct inode *inode = file_inode(file);
struct inode *realinode;
real->flags = 0;
real->file = file->private_data;
if (allow_meta)
realinode = ovl_inode_real(inode);
else
realinode = ovl_inode_realdata(inode);
/* Has it been copied up since we'd opened it? */
if (unlikely(file_inode(real->file) != realinode)) {
real->flags = FDPUT_FPUT;
real->file = ovl_open_realfile(file, realinode);
return PTR_ERR_OR_ZERO(real->file);
}
/* Did the flags change since open? */
if (unlikely((file->f_flags ^ real->file->f_flags) & ~OVL_OPEN_FLAGS))
return ovl_change_flags(real->file, file->f_flags);
return 0;
}
static int ovl_real_fdget(const struct file *file, struct fd *real)
{
if (d_is_dir(file_dentry(file))) {
real->flags = 0;
real->file = ovl_dir_real_file(file, false);
return PTR_ERR_OR_ZERO(real->file);
}
return ovl_real_fdget_meta(file, real, false);
}
static int ovl_open(struct inode *inode, struct file *file)
{
struct file *realfile;
int err;
err = ovl_maybe_copy_up(file_dentry(file), file->f_flags);
if (err)
return err;
/* No longer need these flags, so don't pass them on to underlying fs */
file->f_flags &= ~(O_CREAT | O_EXCL | O_NOCTTY | O_TRUNC);
realfile = ovl_open_realfile(file, ovl_inode_realdata(inode));
if (IS_ERR(realfile))
return PTR_ERR(realfile);
file->private_data = realfile;
return 0;
}
static int ovl_release(struct inode *inode, struct file *file)
{
fput(file->private_data);
return 0;
}
static loff_t ovl_llseek(struct file *file, loff_t offset, int whence)
{
struct inode *inode = file_inode(file);
struct fd real;
const struct cred *old_cred;
loff_t ret;
/*
* The two special cases below do not need to involve real fs,
* so we can optimizing concurrent callers.
*/
if (offset == 0) {
if (whence == SEEK_CUR)
return file->f_pos;
if (whence == SEEK_SET)
return vfs_setpos(file, 0, 0);
}
ret = ovl_real_fdget(file, &real);
if (ret)
return ret;
/*
* Overlay file f_pos is the master copy that is preserved
* through copy up and modified on read/write, but only real
* fs knows how to SEEK_HOLE/SEEK_DATA and real fs may impose
* limitations that are more strict than ->s_maxbytes for specific
* files, so we use the real file to perform seeks.
*/
ovl_inode_lock(inode);
real.file->f_pos = file->f_pos;
old_cred = ovl_override_creds(inode->i_sb);
ret = vfs_llseek(real.file, offset, whence);
revert_creds(old_cred);
file->f_pos = real.file->f_pos;
ovl_inode_unlock(inode);
fdput(real);
return ret;
}
static void ovl_file_accessed(struct file *file)
{
struct inode *inode, *upperinode;
if (file->f_flags & O_NOATIME)
return;
inode = file_inode(file);
upperinode = ovl_inode_upper(inode);
if (!upperinode)
return;
if ((!timespec64_equal(&inode->i_mtime, &upperinode->i_mtime) ||
!timespec64_equal(&inode->i_ctime, &upperinode->i_ctime))) {
inode->i_mtime = upperinode->i_mtime;
inode->i_ctime = upperinode->i_ctime;
}
touch_atime(&file->f_path);
}
static rwf_t ovl_iocb_to_rwf(int ifl)
{
rwf_t flags = 0;
if (ifl & IOCB_NOWAIT)
flags |= RWF_NOWAIT;
if (ifl & IOCB_HIPRI)
flags |= RWF_HIPRI;
if (ifl & IOCB_DSYNC)
flags |= RWF_DSYNC;
if (ifl & IOCB_SYNC)
flags |= RWF_SYNC;
return flags;
}
static void ovl_aio_cleanup_handler(struct ovl_aio_req *aio_req)
{
struct kiocb *iocb = &aio_req->iocb;
struct kiocb *orig_iocb = aio_req->orig_iocb;
if (iocb->ki_flags & IOCB_WRITE) {
struct inode *inode = file_inode(orig_iocb->ki_filp);
/* Actually acquired in ovl_write_iter() */
__sb_writers_acquired(file_inode(iocb->ki_filp)->i_sb,
SB_FREEZE_WRITE);
file_end_write(iocb->ki_filp);
ovl_copyattr(ovl_inode_real(inode), inode);
}
orig_iocb->ki_pos = iocb->ki_pos;
fdput(aio_req->fd);
kmem_cache_free(ovl_aio_request_cachep, aio_req);
}
static void ovl_aio_rw_complete(struct kiocb *iocb, long res, long res2)
{
struct ovl_aio_req *aio_req = container_of(iocb,
struct ovl_aio_req, iocb);
struct kiocb *orig_iocb = aio_req->orig_iocb;
ovl_aio_cleanup_handler(aio_req);
orig_iocb->ki_complete(orig_iocb, res, res2);
}
static ssize_t ovl_read_iter(struct kiocb *iocb, struct iov_iter *iter)
{
struct file *file = iocb->ki_filp;
struct fd real;
const struct cred *old_cred;
ssize_t ret;
if (!iov_iter_count(iter))
return 0;
ret = ovl_real_fdget(file, &real);
if (ret)
return ret;
old_cred = ovl_override_creds(file_inode(file)->i_sb);
if (is_sync_kiocb(iocb)) {
ret = vfs_iter_read(real.file, iter, &iocb->ki_pos,
ovl_iocb_to_rwf(iocb->ki_flags));
} else {
struct ovl_aio_req *aio_req;
ret = -ENOMEM;
aio_req = kmem_cache_zalloc(ovl_aio_request_cachep, GFP_KERNEL);
if (!aio_req)
goto out;
aio_req->fd = real;
real.flags = 0;
aio_req->orig_iocb = iocb;
kiocb_clone(&aio_req->iocb, iocb, real.file);
aio_req->iocb.ki_complete = ovl_aio_rw_complete;
ret = vfs_iocb_iter_read(real.file, &aio_req->iocb, iter);
if (ret != -EIOCBQUEUED)
ovl_aio_cleanup_handler(aio_req);
}
out:
revert_creds(old_cred);
ovl_file_accessed(file);
fdput(real);
return ret;
}
static ssize_t ovl_write_iter(struct kiocb *iocb, struct iov_iter *iter)
{
struct file *file = iocb->ki_filp;
struct inode *inode = file_inode(file);
struct fd real;
const struct cred *old_cred;
ssize_t ret;
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-01 02:15:29 +08:00
int ifl = iocb->ki_flags;
if (!iov_iter_count(iter))
return 0;
inode_lock(inode);
/* Update mode */
ovl_copyattr(ovl_inode_real(inode), inode);
ret = file_remove_privs(file);
if (ret)
goto out_unlock;
ret = ovl_real_fdget(file, &real);
if (ret)
goto out_unlock;
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-01 02:15:29 +08:00
if (!ovl_should_sync(OVL_FS(inode->i_sb)))
ifl &= ~(IOCB_DSYNC | IOCB_SYNC);
old_cred = ovl_override_creds(file_inode(file)->i_sb);
if (is_sync_kiocb(iocb)) {
file_start_write(real.file);
ret = vfs_iter_write(real.file, iter, &iocb->ki_pos,
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-01 02:15:29 +08:00
ovl_iocb_to_rwf(ifl));
file_end_write(real.file);
/* Update size */
ovl_copyattr(ovl_inode_real(inode), inode);
} else {
struct ovl_aio_req *aio_req;
ret = -ENOMEM;
aio_req = kmem_cache_zalloc(ovl_aio_request_cachep, GFP_KERNEL);
if (!aio_req)
goto out;
file_start_write(real.file);
/* Pacify lockdep, same trick as done in aio_write() */
__sb_writers_release(file_inode(real.file)->i_sb,
SB_FREEZE_WRITE);
aio_req->fd = real;
real.flags = 0;
aio_req->orig_iocb = iocb;
kiocb_clone(&aio_req->iocb, iocb, real.file);
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-01 02:15:29 +08:00
aio_req->iocb.ki_flags = ifl;
aio_req->iocb.ki_complete = ovl_aio_rw_complete;
ret = vfs_iocb_iter_write(real.file, &aio_req->iocb, iter);
if (ret != -EIOCBQUEUED)
ovl_aio_cleanup_handler(aio_req);
}
out:
revert_creds(old_cred);
fdput(real);
out_unlock:
inode_unlock(inode);
return ret;
}
static int ovl_fsync(struct file *file, loff_t start, loff_t end, int datasync)
{
struct fd real;
const struct cred *old_cred;
int ret;
ovl: provide a mount option "volatile" Container folks are complaining that dnf/yum issues too many sync while installing packages and this slows down the image build. Build requirement is such that they don't care if a node goes down while build was still going on. In that case, they will simply throw away unfinished layer and start new build. So they don't care about syncing intermediate state to the disk and hence don't want to pay the price associated with sync. So they are asking for mount options where they can disable sync on overlay mount point. They primarily seem to have two use cases. - For building images, they will mount overlay with nosync and then sync upper layer after unmounting overlay and reuse upper as lower for next layer. - For running containers, they don't seem to care about syncing upper layer because if node goes down, they will simply throw away upper layer and create a fresh one. So this patch provides a mount option "volatile" which disables all forms of sync. Now it is caller's responsibility to throw away upper if system crashes or shuts down and start fresh. With "volatile", I am seeing roughly 20% speed up in my VM where I am just installing emacs in an image. Installation time drops from 31 seconds to 25 seconds when nosync option is used. This is for the case of building on top of an image where all packages are already cached. That way I take out the network operations latency out of the measurement. Giuseppe is also looking to cut down on number of iops done on the disk. He is complaining that often in cloud their VMs are throttled if they cross the limit. This option can help them where they reduce number of iops (by cutting down on frequent sync and writebacks). Signed-off-by: Giuseppe Scrivano <gscrivan@redhat.com> Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-09-01 02:15:29 +08:00
if (!ovl_should_sync(OVL_FS(file_inode(file)->i_sb)))
return 0;
ret = ovl_real_fdget_meta(file, &real, !datasync);
if (ret)
return ret;
/* Don't sync lower file for fear of receiving EROFS error */
if (file_inode(real.file) == ovl_inode_upper(file_inode(file))) {
old_cred = ovl_override_creds(file_inode(file)->i_sb);
ret = vfs_fsync_range(real.file, start, end, datasync);
revert_creds(old_cred);
}
fdput(real);
return ret;
}
static int ovl_mmap(struct file *file, struct vm_area_struct *vma)
{
struct file *realfile = file->private_data;
const struct cred *old_cred;
int ret;
if (!realfile->f_op->mmap)
return -ENODEV;
if (WARN_ON(file != vma->vm_file))
return -EIO;
vma->vm_file = get_file(realfile);
old_cred = ovl_override_creds(file_inode(file)->i_sb);
ret = call_mmap(vma->vm_file, vma);
revert_creds(old_cred);
if (ret) {
/* Drop reference count from new vm_file value */
fput(realfile);
} else {
/* Drop reference count from previous vm_file value */
fput(file);
}
ovl_file_accessed(file);
return ret;
}
static long ovl_fallocate(struct file *file, int mode, loff_t offset, loff_t len)
{
struct inode *inode = file_inode(file);
struct fd real;
const struct cred *old_cred;
int ret;
ret = ovl_real_fdget(file, &real);
if (ret)
return ret;
old_cred = ovl_override_creds(file_inode(file)->i_sb);
ret = vfs_fallocate(real.file, mode, offset, len);
revert_creds(old_cred);
/* Update size */
ovl_copyattr(ovl_inode_real(inode), inode);
fdput(real);
return ret;
}
static int ovl_fadvise(struct file *file, loff_t offset, loff_t len, int advice)
{
struct fd real;
const struct cred *old_cred;
int ret;
ret = ovl_real_fdget(file, &real);
if (ret)
return ret;
old_cred = ovl_override_creds(file_inode(file)->i_sb);
ret = vfs_fadvise(real.file, offset, len, advice);
revert_creds(old_cred);
fdput(real);
return ret;
}
static long ovl_real_ioctl(struct file *file, unsigned int cmd,
unsigned long arg)
{
struct fd real;
long ret;
ret = ovl_real_fdget(file, &real);
if (ret)
return ret;
ret = security_file_ioctl(real.file, cmd, arg);
if (!ret) {
/*
* Don't override creds, since we currently can't safely check
* permissions before doing so.
*/
ret = vfs_ioctl(real.file, cmd, arg);
}
fdput(real);
return ret;
}
static long ovl_ioctl_set_flags(struct file *file, unsigned int cmd,
unsigned long arg)
{
long ret;
struct inode *inode = file_inode(file);
if (!inode_owner_or_capable(inode))
return -EACCES;
ret = mnt_want_write_file(file);
if (ret)
return ret;
inode_lock(inode);
/*
* Prevent copy up if immutable and has no CAP_LINUX_IMMUTABLE
* capability.
*/
ret = -EPERM;
if (!ovl_has_upperdata(inode) && IS_IMMUTABLE(inode) &&
!capable(CAP_LINUX_IMMUTABLE))
goto unlock;
ret = ovl_maybe_copy_up(file_dentry(file), O_WRONLY);
if (ret)
goto unlock;
ret = ovl_real_ioctl(file, cmd, arg);
ovl_copyflags(ovl_inode_real(inode), inode);
unlock:
inode_unlock(inode);
mnt_drop_write_file(file);
return ret;
}
long ovl_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
long ret;
switch (cmd) {
case FS_IOC_GETFLAGS:
case FS_IOC_FSGETXATTR:
ret = ovl_real_ioctl(file, cmd, arg);
break;
case FS_IOC_FSSETXATTR:
case FS_IOC_SETFLAGS:
ret = ovl_ioctl_set_flags(file, cmd, arg);
break;
default:
ret = -ENOTTY;
}
return ret;
}
#ifdef CONFIG_COMPAT
long ovl_compat_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
{
switch (cmd) {
case FS_IOC32_GETFLAGS:
cmd = FS_IOC_GETFLAGS;
break;
case FS_IOC32_SETFLAGS:
cmd = FS_IOC_SETFLAGS;
break;
default:
return -ENOIOCTLCMD;
}
return ovl_ioctl(file, cmd, arg);
}
#endif
enum ovl_copyop {
OVL_COPY,
OVL_CLONE,
OVL_DEDUPE,
};
static loff_t ovl_copyfile(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t len, unsigned int flags, enum ovl_copyop op)
{
struct inode *inode_out = file_inode(file_out);
struct fd real_in, real_out;
const struct cred *old_cred;
loff_t ret;
ret = ovl_real_fdget(file_out, &real_out);
if (ret)
return ret;
ret = ovl_real_fdget(file_in, &real_in);
if (ret) {
fdput(real_out);
return ret;
}
old_cred = ovl_override_creds(file_inode(file_out)->i_sb);
switch (op) {
case OVL_COPY:
ret = vfs_copy_file_range(real_in.file, pos_in,
real_out.file, pos_out, len, flags);
break;
case OVL_CLONE:
ret = vfs_clone_file_range(real_in.file, pos_in,
real_out.file, pos_out, len, flags);
break;
case OVL_DEDUPE:
ret = vfs_dedupe_file_range_one(real_in.file, pos_in,
real_out.file, pos_out, len,
flags);
break;
}
revert_creds(old_cred);
/* Update size */
ovl_copyattr(ovl_inode_real(inode_out), inode_out);
fdput(real_in);
fdput(real_out);
return ret;
}
static ssize_t ovl_copy_file_range(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
size_t len, unsigned int flags)
{
return ovl_copyfile(file_in, pos_in, file_out, pos_out, len, flags,
OVL_COPY);
}
static loff_t ovl_remap_file_range(struct file *file_in, loff_t pos_in,
struct file *file_out, loff_t pos_out,
loff_t len, unsigned int remap_flags)
{
enum ovl_copyop op;
if (remap_flags & ~(REMAP_FILE_DEDUP | REMAP_FILE_ADVISORY))
return -EINVAL;
if (remap_flags & REMAP_FILE_DEDUP)
op = OVL_DEDUPE;
else
op = OVL_CLONE;
/*
* Don't copy up because of a dedupe request, this wouldn't make sense
* most of the time (data would be duplicated instead of deduplicated).
*/
if (op == OVL_DEDUPE &&
(!ovl_inode_upper(file_inode(file_in)) ||
!ovl_inode_upper(file_inode(file_out))))
return -EPERM;
return ovl_copyfile(file_in, pos_in, file_out, pos_out, len,
remap_flags, op);
}
const struct file_operations ovl_file_operations = {
.open = ovl_open,
.release = ovl_release,
.llseek = ovl_llseek,
.read_iter = ovl_read_iter,
.write_iter = ovl_write_iter,
.fsync = ovl_fsync,
.mmap = ovl_mmap,
.fallocate = ovl_fallocate,
.fadvise = ovl_fadvise,
.unlocked_ioctl = ovl_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = ovl_compat_ioctl,
#endif
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
.copy_file_range = ovl_copy_file_range,
.remap_file_range = ovl_remap_file_range,
};
int __init ovl_aio_request_cache_init(void)
{
ovl_aio_request_cachep = kmem_cache_create("ovl_aio_req",
sizeof(struct ovl_aio_req),
0, SLAB_HWCACHE_ALIGN, NULL);
if (!ovl_aio_request_cachep)
return -ENOMEM;
return 0;
}
void ovl_aio_request_cache_destroy(void)
{
kmem_cache_destroy(ovl_aio_request_cachep);
}