OpenCloudOS-Kernel/drivers/atm/idt77105.c

376 lines
11 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/* drivers/atm/idt77105.c - IDT77105 (PHY) driver */
/* Written 1999 by Greg Banks, NEC Australia <gnb@linuxfan.com>. Based on suni.c */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/errno.h>
#include <linux/atmdev.h>
#include <linux/sonet.h>
#include <linux/delay.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/capability.h>
#include <linux/atm_idt77105.h>
#include <linux/spinlock.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <asm/param.h>
#include <linux/uaccess.h>
#include "idt77105.h"
#undef GENERAL_DEBUG
#ifdef GENERAL_DEBUG
#define DPRINTK(format,args...) printk(KERN_DEBUG format,##args)
#else
#define DPRINTK(format,args...)
#endif
struct idt77105_priv {
struct idt77105_stats stats; /* link diagnostics */
struct atm_dev *dev; /* device back-pointer */
struct idt77105_priv *next;
int loop_mode;
unsigned char old_mcr; /* storage of MCR reg while signal lost */
};
static DEFINE_SPINLOCK(idt77105_priv_lock);
#define PRIV(dev) ((struct idt77105_priv *) dev->phy_data)
#define PUT(val,reg) dev->ops->phy_put(dev,val,IDT77105_##reg)
#define GET(reg) dev->ops->phy_get(dev,IDT77105_##reg)
static void idt77105_stats_timer_func(struct timer_list *);
static void idt77105_restart_timer_func(struct timer_list *);
timer: Remove expires and data arguments from DEFINE_TIMER Drop the arguments from the macro and adjust all callers with the following script: perl -pi -e 's/DEFINE_TIMER\((.*), 0, 0\);/DEFINE_TIMER($1);/g;' \ $(git grep DEFINE_TIMER | cut -d: -f1 | sort -u | grep -v timer.h) Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # for m68k parts Acked-by: Guenter Roeck <linux@roeck-us.net> # for watchdog parts Acked-by: David S. Miller <davem@davemloft.net> # for networking parts Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kalle Valo <kvalo@codeaurora.org> # for wireless parts Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: Petr Mladek <pmladek@suse.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Sebastian Reichel <sre@kernel.org> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: linux1394-devel@lists.sourceforge.net Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: linux-s390@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Ursula Braun <ubraun@linux.vnet.ibm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Harish Patil <harish.patil@cavium.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Michael Reed <mdr@sgi.com> Cc: Manish Chopra <manish.chopra@cavium.com> Cc: Len Brown <len.brown@intel.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-pm@vger.kernel.org Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Julian Wiedmann <jwi@linux.vnet.ibm.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Mark Gross <mark.gross@intel.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-scsi@vger.kernel.org Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: netdev@vger.kernel.org Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linuxppc-dev@lists.ozlabs.org Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lkml.kernel.org/r/1507159627-127660-11-git-send-email-keescook@chromium.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2017-10-05 07:27:04 +08:00
static DEFINE_TIMER(stats_timer, idt77105_stats_timer_func);
static DEFINE_TIMER(restart_timer, idt77105_restart_timer_func);
static int start_timer = 1;
static struct idt77105_priv *idt77105_all = NULL;
/*
* Retrieve the value of one of the IDT77105's counters.
* `counter' is one of the IDT77105_CTRSEL_* constants.
*/
static u16 get_counter(struct atm_dev *dev, int counter)
{
u16 val;
/* write the counter bit into PHY register 6 */
PUT(counter, CTRSEL);
/* read the low 8 bits from register 4 */
val = GET(CTRLO);
/* read the high 8 bits from register 5 */
val |= GET(CTRHI)<<8;
return val;
}
/*
* Timer function called every second to gather statistics
* from the 77105. This is done because the h/w registers
* will overflow if not read at least once per second. The
* kernel's stats are much higher precision. Also, having
* a separate copy of the stats allows implementation of
* an ioctl which gathers the stats *without* zero'ing them.
*/
static void idt77105_stats_timer_func(struct timer_list *unused)
{
struct idt77105_priv *walk;
struct atm_dev *dev;
struct idt77105_stats *stats;
DPRINTK("IDT77105 gathering statistics\n");
for (walk = idt77105_all; walk; walk = walk->next) {
dev = walk->dev;
stats = &walk->stats;
stats->symbol_errors += get_counter(dev, IDT77105_CTRSEL_SEC);
stats->tx_cells += get_counter(dev, IDT77105_CTRSEL_TCC);
stats->rx_cells += get_counter(dev, IDT77105_CTRSEL_RCC);
stats->rx_hec_errors += get_counter(dev, IDT77105_CTRSEL_RHEC);
}
if (!start_timer) mod_timer(&stats_timer,jiffies+IDT77105_STATS_TIMER_PERIOD);
}
/*
* A separate timer func which handles restarting PHY chips which
* have had the cable re-inserted after being pulled out. This is
* done by polling the Good Signal Bit in the Interrupt Status
* register every 5 seconds. The other technique (checking Good
* Signal Bit in the interrupt handler) cannot be used because PHY
* interrupts need to be disabled when the cable is pulled out
* to avoid lots of spurious cell error interrupts.
*/
static void idt77105_restart_timer_func(struct timer_list *unused)
{
struct idt77105_priv *walk;
struct atm_dev *dev;
unsigned char istat;
DPRINTK("IDT77105 checking for cable re-insertion\n");
for (walk = idt77105_all; walk; walk = walk->next) {
dev = walk->dev;
if (dev->signal != ATM_PHY_SIG_LOST)
continue;
istat = GET(ISTAT); /* side effect: clears all interrupt status bits */
if (istat & IDT77105_ISTAT_GOODSIG) {
/* Found signal again */
atm_dev_signal_change(dev, ATM_PHY_SIG_FOUND);
printk(KERN_NOTICE "%s(itf %d): signal detected again\n",
dev->type,dev->number);
/* flush the receive FIFO */
PUT( GET(DIAG) | IDT77105_DIAG_RFLUSH, DIAG);
/* re-enable interrupts */
PUT( walk->old_mcr ,MCR);
}
}
if (!start_timer) mod_timer(&restart_timer,jiffies+IDT77105_RESTART_TIMER_PERIOD);
}
static int fetch_stats(struct atm_dev *dev,struct idt77105_stats __user *arg,int zero)
{
unsigned long flags;
struct idt77105_stats stats;
spin_lock_irqsave(&idt77105_priv_lock, flags);
memcpy(&stats, &PRIV(dev)->stats, sizeof(struct idt77105_stats));
if (zero)
memset(&PRIV(dev)->stats, 0, sizeof(struct idt77105_stats));
spin_unlock_irqrestore(&idt77105_priv_lock, flags);
if (arg == NULL)
return 0;
return copy_to_user(arg, &stats,
sizeof(struct idt77105_stats)) ? -EFAULT : 0;
}
static int set_loopback(struct atm_dev *dev,int mode)
{
int diag;
diag = GET(DIAG) & ~IDT77105_DIAG_LCMASK;
switch (mode) {
case ATM_LM_NONE:
break;
case ATM_LM_LOC_ATM:
diag |= IDT77105_DIAG_LC_PHY_LOOPBACK;
break;
case ATM_LM_RMT_ATM:
diag |= IDT77105_DIAG_LC_LINE_LOOPBACK;
break;
default:
return -EINVAL;
}
PUT(diag,DIAG);
printk(KERN_NOTICE "%s(%d) Loopback mode is: %s\n", dev->type,
dev->number,
(mode == ATM_LM_NONE ? "NONE" :
(mode == ATM_LM_LOC_ATM ? "DIAG (local)" :
(mode == IDT77105_DIAG_LC_LINE_LOOPBACK ? "LOOP (remote)" :
"unknown")))
);
PRIV(dev)->loop_mode = mode;
return 0;
}
static int idt77105_ioctl(struct atm_dev *dev,unsigned int cmd,void __user *arg)
{
printk(KERN_NOTICE "%s(%d) idt77105_ioctl() called\n",dev->type,dev->number);
switch (cmd) {
case IDT77105_GETSTATZ:
if (!capable(CAP_NET_ADMIN)) return -EPERM;
fallthrough;
case IDT77105_GETSTAT:
return fetch_stats(dev, arg, cmd == IDT77105_GETSTATZ);
case ATM_SETLOOP:
return set_loopback(dev,(int)(unsigned long) arg);
case ATM_GETLOOP:
return put_user(PRIV(dev)->loop_mode,(int __user *)arg) ?
-EFAULT : 0;
case ATM_QUERYLOOP:
return put_user(ATM_LM_LOC_ATM | ATM_LM_RMT_ATM,
(int __user *) arg) ? -EFAULT : 0;
default:
return -ENOIOCTLCMD;
}
}
static void idt77105_int(struct atm_dev *dev)
{
unsigned char istat;
istat = GET(ISTAT); /* side effect: clears all interrupt status bits */
DPRINTK("IDT77105 generated an interrupt, istat=%02x\n", (unsigned)istat);
if (istat & IDT77105_ISTAT_RSCC) {
/* Rx Signal Condition Change - line went up or down */
if (istat & IDT77105_ISTAT_GOODSIG) { /* signal detected again */
/* This should not happen (restart timer does it) but JIC */
atm_dev_signal_change(dev, ATM_PHY_SIG_FOUND);
} else { /* signal lost */
/*
* Disable interrupts and stop all transmission and
* reception - the restart timer will restore these.
*/
PRIV(dev)->old_mcr = GET(MCR);
PUT(
(PRIV(dev)->old_mcr|
IDT77105_MCR_DREC|
IDT77105_MCR_DRIC|
IDT77105_MCR_HALTTX
) & ~IDT77105_MCR_EIP, MCR);
atm_dev_signal_change(dev, ATM_PHY_SIG_LOST);
printk(KERN_NOTICE "%s(itf %d): signal lost\n",
dev->type,dev->number);
}
}
if (istat & IDT77105_ISTAT_RFO) {
/* Rx FIFO Overrun -- perform a FIFO flush */
PUT( GET(DIAG) | IDT77105_DIAG_RFLUSH, DIAG);
printk(KERN_NOTICE "%s(itf %d): receive FIFO overrun\n",
dev->type,dev->number);
}
#ifdef GENERAL_DEBUG
if (istat & (IDT77105_ISTAT_HECERR | IDT77105_ISTAT_SCR |
IDT77105_ISTAT_RSE)) {
/* normally don't care - just report in stats */
printk(KERN_NOTICE "%s(itf %d): received cell with error\n",
dev->type,dev->number);
}
#endif
}
static int idt77105_start(struct atm_dev *dev)
{
unsigned long flags;
if (!(dev->phy_data = kmalloc(sizeof(struct idt77105_priv),GFP_KERNEL)))
return -ENOMEM;
PRIV(dev)->dev = dev;
spin_lock_irqsave(&idt77105_priv_lock, flags);
PRIV(dev)->next = idt77105_all;
idt77105_all = PRIV(dev);
spin_unlock_irqrestore(&idt77105_priv_lock, flags);
memset(&PRIV(dev)->stats,0,sizeof(struct idt77105_stats));
/* initialise dev->signal from Good Signal Bit */
atm_dev_signal_change(dev,
GET(ISTAT) & IDT77105_ISTAT_GOODSIG ?
ATM_PHY_SIG_FOUND : ATM_PHY_SIG_LOST);
if (dev->signal == ATM_PHY_SIG_LOST)
printk(KERN_WARNING "%s(itf %d): no signal\n",dev->type,
dev->number);
/* initialise loop mode from hardware */
switch ( GET(DIAG) & IDT77105_DIAG_LCMASK ) {
case IDT77105_DIAG_LC_NORMAL:
PRIV(dev)->loop_mode = ATM_LM_NONE;
break;
case IDT77105_DIAG_LC_PHY_LOOPBACK:
PRIV(dev)->loop_mode = ATM_LM_LOC_ATM;
break;
case IDT77105_DIAG_LC_LINE_LOOPBACK:
PRIV(dev)->loop_mode = ATM_LM_RMT_ATM;
break;
}
/* enable interrupts, e.g. on loss of signal */
PRIV(dev)->old_mcr = GET(MCR);
if (dev->signal == ATM_PHY_SIG_FOUND) {
PRIV(dev)->old_mcr |= IDT77105_MCR_EIP;
PUT(PRIV(dev)->old_mcr, MCR);
}
idt77105_stats_timer_func(0); /* clear 77105 counters */
(void) fetch_stats(dev,NULL,1); /* clear kernel counters */
spin_lock_irqsave(&idt77105_priv_lock, flags);
if (start_timer) {
start_timer = 0;
stats_timer.expires = jiffies+IDT77105_STATS_TIMER_PERIOD;
add_timer(&stats_timer);
restart_timer.expires = jiffies+IDT77105_RESTART_TIMER_PERIOD;
add_timer(&restart_timer);
}
spin_unlock_irqrestore(&idt77105_priv_lock, flags);
return 0;
}
static int idt77105_stop(struct atm_dev *dev)
{
struct idt77105_priv *walk, *prev;
DPRINTK("%s(itf %d): stopping IDT77105\n",dev->type,dev->number);
/* disable interrupts */
PUT( GET(MCR) & ~IDT77105_MCR_EIP, MCR );
/* detach private struct from atm_dev & free */
for (prev = NULL, walk = idt77105_all ;
walk != NULL;
prev = walk, walk = walk->next) {
if (walk->dev == dev) {
if (prev != NULL)
prev->next = walk->next;
else
idt77105_all = walk->next;
dev->phy = NULL;
dev->phy_data = NULL;
kfree(walk);
break;
}
}
return 0;
}
static const struct atmphy_ops idt77105_ops = {
.start = idt77105_start,
.ioctl = idt77105_ioctl,
.interrupt = idt77105_int,
.stop = idt77105_stop,
};
int idt77105_init(struct atm_dev *dev)
{
dev->phy = &idt77105_ops;
return 0;
}
EXPORT_SYMBOL(idt77105_init);
static void __exit idt77105_exit(void)
{
/* turn off timers */
del_timer_sync(&stats_timer);
del_timer_sync(&restart_timer);
}
module_exit(idt77105_exit);
MODULE_LICENSE("GPL");