UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/media/i2c/ov08d10.c

1532 lines
34 KiB
C
Raw Normal View History

media: i2c: Add ov08d10 camera sensor driver Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su <jimmy.su@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-12 13:42:55 +08:00
// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2022 Intel Corporation.
#include <linux/acpi.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-device.h>
#include <media/v4l2-fwnode.h>
#define OV08D10_SCLK 144000000ULL
#define OV08D10_XVCLK_19_2 19200000
#define OV08D10_ROWCLK 36000
#define OV08D10_DATA_LANES 2
#define OV08D10_RGB_DEPTH 10
#define OV08D10_REG_PAGE 0xfd
#define OV08D10_REG_GLOBAL_EFFECTIVE 0x01
#define OV08D10_REG_CHIP_ID_0 0x00
#define OV08D10_REG_CHIP_ID_1 0x01
#define OV08D10_ID_MASK GENMASK(15, 0)
#define OV08D10_CHIP_ID 0x5608
#define OV08D10_REG_MODE_SELECT 0xa0
#define OV08D10_MODE_STANDBY 0x00
#define OV08D10_MODE_STREAMING 0x01
/* vertical-timings from sensor */
#define OV08D10_REG_VTS_H 0x05
#define OV08D10_REG_VTS_L 0x06
#define OV08D10_VTS_MAX 0x7fff
/* Exposure controls from sensor */
#define OV08D10_REG_EXPOSURE_H 0x02
#define OV08D10_REG_EXPOSURE_M 0x03
#define OV08D10_REG_EXPOSURE_L 0x04
#define OV08D10_EXPOSURE_MIN 6
#define OV08D10_EXPOSURE_MAX_MARGIN 6
#define OV08D10_EXPOSURE_STEP 1
/* Analog gain controls from sensor */
#define OV08D10_REG_ANALOG_GAIN 0x24
#define OV08D10_ANAL_GAIN_MIN 128
#define OV08D10_ANAL_GAIN_MAX 2047
#define OV08D10_ANAL_GAIN_STEP 1
/* Digital gain controls from sensor */
#define OV08D10_REG_MWB_DGAIN_C 0x21
#define OV08D10_REG_MWB_DGAIN_F 0x22
#define OV08D10_DGTL_GAIN_MIN 0
#define OV08D10_DGTL_GAIN_MAX 4095
#define OV08D10_DGTL_GAIN_STEP 1
#define OV08D10_DGTL_GAIN_DEFAULT 1024
/* Test Pattern Control */
#define OV08D10_REG_TEST_PATTERN 0x12
#define OV08D10_TEST_PATTERN_ENABLE 0x01
#define OV08D10_TEST_PATTERN_DISABLE 0x00
/* Flip Mirror Controls from sensor */
#define OV08D10_REG_FLIP_OPT 0x32
#define OV08D10_REG_FLIP_MASK 0x3
#define to_ov08d10(_sd) container_of(_sd, struct ov08d10, sd)
struct ov08d10_reg {
u8 address;
u8 val;
};
struct ov08d10_reg_list {
u32 num_of_regs;
const struct ov08d10_reg *regs;
};
struct ov08d10_link_freq_config {
const struct ov08d10_reg_list reg_list;
};
struct ov08d10_mode {
/* Frame width in pixels */
u32 width;
/* Frame height in pixels */
u32 height;
/* Horizontal timining size */
u32 hts;
/* Default vertical timining size */
u32 vts_def;
/* Min vertical timining size */
u32 vts_min;
/* Link frequency needed for this resolution */
u32 link_freq_index;
/* Sensor register settings for this resolution */
const struct ov08d10_reg_list reg_list;
/* Number of data lanes */
u8 data_lanes;
};
/* 3280x2460, 3264x2448 need 720Mbps/lane, 2 lanes */
static const struct ov08d10_reg mipi_data_rate_720mbps[] = {
{0xfd, 0x00},
{0x11, 0x2a},
{0x14, 0x43},
{0x1a, 0x04},
{0x1b, 0xe1},
{0x1e, 0x13},
{0xb7, 0x02}
};
/* 1632x1224 needs 360Mbps/lane, 2 lanes */
static const struct ov08d10_reg mipi_data_rate_360mbps[] = {
{0xfd, 0x00},
{0x1a, 0x04},
{0x1b, 0xe1},
{0x1d, 0x00},
{0x1c, 0x19},
{0x11, 0x2a},
{0x14, 0x54},
{0x1e, 0x13},
{0xb7, 0x02}
};
static const struct ov08d10_reg lane_2_mode_3280x2460[] = {
/* 3280x2460 resolution */
{0xfd, 0x01},
{0x12, 0x00},
{0x03, 0x12},
{0x04, 0x58},
{0x07, 0x05},
{0x21, 0x02},
{0x24, 0x30},
{0x33, 0x03},
{0x01, 0x03},
{0x19, 0x10},
{0x42, 0x55},
{0x43, 0x00},
{0x47, 0x07},
{0x48, 0x08},
{0xb2, 0x7f},
{0xb3, 0x7b},
{0xbd, 0x08},
{0xd2, 0x57},
{0xd3, 0x10},
{0xd4, 0x08},
{0xd5, 0x08},
{0xd6, 0x06},
{0xb1, 0x00},
{0xb4, 0x00},
{0xb7, 0x0a},
{0xbc, 0x44},
{0xbf, 0x48},
{0xc1, 0x10},
{0xc3, 0x24},
{0xc8, 0x03},
{0xc9, 0xf8},
{0xe1, 0x33},
{0xe2, 0xbb},
{0x51, 0x0c},
{0x52, 0x0a},
{0x57, 0x8c},
{0x59, 0x09},
{0x5a, 0x08},
{0x5e, 0x10},
{0x60, 0x02},
{0x6d, 0x5c},
{0x76, 0x16},
{0x7c, 0x11},
{0x90, 0x28},
{0x91, 0x16},
{0x92, 0x1c},
{0x93, 0x24},
{0x95, 0x48},
{0x9c, 0x06},
{0xca, 0x0c},
{0xce, 0x0d},
{0xfd, 0x01},
{0xc0, 0x00},
{0xdd, 0x18},
{0xde, 0x19},
{0xdf, 0x32},
{0xe0, 0x70},
{0xfd, 0x01},
{0xc2, 0x05},
{0xd7, 0x88},
{0xd8, 0x77},
{0xd9, 0x00},
{0xfd, 0x07},
{0x00, 0xf8},
{0x01, 0x2b},
{0x05, 0x40},
{0x08, 0x06},
{0x09, 0x11},
{0x28, 0x6f},
{0x2a, 0x20},
{0x2b, 0x05},
{0x5e, 0x10},
{0x52, 0x00},
{0x53, 0x7c},
{0x54, 0x00},
{0x55, 0x7c},
{0x56, 0x00},
{0x57, 0x7c},
{0x58, 0x00},
{0x59, 0x7c},
{0xfd, 0x02},
{0x9a, 0x30},
{0xa8, 0x02},
{0xfd, 0x02},
{0xa1, 0x01},
{0xa2, 0x09},
{0xa3, 0x9c},
{0xa5, 0x00},
{0xa6, 0x0c},
{0xa7, 0xd0},
{0xfd, 0x00},
{0x24, 0x01},
{0xc0, 0x16},
{0xc1, 0x08},
{0xc2, 0x30},
{0x8e, 0x0c},
{0x8f, 0xd0},
{0x90, 0x09},
{0x91, 0x9c},
{0xfd, 0x05},
{0x04, 0x40},
{0x07, 0x00},
{0x0d, 0x01},
{0x0f, 0x01},
{0x10, 0x00},
{0x11, 0x00},
{0x12, 0x0c},
{0x13, 0xcf},
{0x14, 0x00},
{0x15, 0x00},
{0xfd, 0x00},
{0x20, 0x0f},
{0xe7, 0x03},
{0xe7, 0x00}
};
static const struct ov08d10_reg lane_2_mode_3264x2448[] = {
/* 3264x2448 resolution */
{0xfd, 0x01},
{0x12, 0x00},
{0x03, 0x12},
{0x04, 0x58},
{0x07, 0x05},
{0x21, 0x02},
{0x24, 0x30},
{0x33, 0x03},
{0x01, 0x03},
{0x19, 0x10},
{0x42, 0x55},
{0x43, 0x00},
{0x47, 0x07},
{0x48, 0x08},
{0xb2, 0x7f},
{0xb3, 0x7b},
{0xbd, 0x08},
{0xd2, 0x57},
{0xd3, 0x10},
{0xd4, 0x08},
{0xd5, 0x08},
{0xd6, 0x06},
{0xb1, 0x00},
{0xb4, 0x00},
{0xb7, 0x0a},
{0xbc, 0x44},
{0xbf, 0x48},
{0xc1, 0x10},
{0xc3, 0x24},
{0xc8, 0x03},
{0xc9, 0xf8},
{0xe1, 0x33},
{0xe2, 0xbb},
{0x51, 0x0c},
{0x52, 0x0a},
{0x57, 0x8c},
{0x59, 0x09},
{0x5a, 0x08},
{0x5e, 0x10},
{0x60, 0x02},
{0x6d, 0x5c},
{0x76, 0x16},
{0x7c, 0x11},
{0x90, 0x28},
{0x91, 0x16},
{0x92, 0x1c},
{0x93, 0x24},
{0x95, 0x48},
{0x9c, 0x06},
{0xca, 0x0c},
{0xce, 0x0d},
{0xfd, 0x01},
{0xc0, 0x00},
{0xdd, 0x18},
{0xde, 0x19},
{0xdf, 0x32},
{0xe0, 0x70},
{0xfd, 0x01},
{0xc2, 0x05},
{0xd7, 0x88},
{0xd8, 0x77},
{0xd9, 0x00},
{0xfd, 0x07},
{0x00, 0xf8},
{0x01, 0x2b},
{0x05, 0x40},
{0x08, 0x06},
{0x09, 0x11},
{0x28, 0x6f},
{0x2a, 0x20},
{0x2b, 0x05},
{0x5e, 0x10},
{0x52, 0x00},
{0x53, 0x7c},
{0x54, 0x00},
{0x55, 0x7c},
{0x56, 0x00},
{0x57, 0x7c},
{0x58, 0x00},
{0x59, 0x7c},
{0xfd, 0x02},
{0x9a, 0x30},
{0xa8, 0x02},
{0xfd, 0x02},
{0xa1, 0x09},
{0xa2, 0x09},
{0xa3, 0x90},
{0xa5, 0x08},
{0xa6, 0x0c},
{0xa7, 0xc0},
{0xfd, 0x00},
{0x24, 0x01},
{0xc0, 0x16},
{0xc1, 0x08},
{0xc2, 0x30},
{0x8e, 0x0c},
{0x8f, 0xc0},
{0x90, 0x09},
{0x91, 0x90},
{0xfd, 0x05},
{0x04, 0x40},
{0x07, 0x00},
{0x0d, 0x01},
{0x0f, 0x01},
{0x10, 0x00},
{0x11, 0x00},
{0x12, 0x0c},
{0x13, 0xcf},
{0x14, 0x00},
{0x15, 0x00},
{0xfd, 0x00},
{0x20, 0x0f},
{0xe7, 0x03},
{0xe7, 0x00}
};
static const struct ov08d10_reg lane_2_mode_1632x1224[] = {
/* 1640x1232 resolution */
{0xfd, 0x01},
{0x1a, 0x0a},
{0x1b, 0x08},
{0x2a, 0x01},
{0x2b, 0x9a},
{0xfd, 0x01},
{0x12, 0x00},
{0x03, 0x05},
{0x04, 0xe2},
{0x07, 0x05},
{0x21, 0x02},
{0x24, 0x30},
{0x33, 0x03},
{0x31, 0x06},
{0x33, 0x03},
{0x01, 0x03},
{0x19, 0x10},
{0x42, 0x55},
{0x43, 0x00},
{0x47, 0x07},
{0x48, 0x08},
{0xb2, 0x7f},
{0xb3, 0x7b},
{0xbd, 0x08},
{0xd2, 0x57},
{0xd3, 0x10},
{0xd4, 0x08},
{0xd5, 0x08},
{0xd6, 0x06},
{0xb1, 0x00},
{0xb4, 0x00},
{0xb7, 0x0a},
{0xbc, 0x44},
{0xbf, 0x48},
{0xc1, 0x10},
{0xc3, 0x24},
{0xc8, 0x03},
{0xc9, 0xf8},
{0xe1, 0x33},
{0xe2, 0xbb},
{0x51, 0x0c},
{0x52, 0x0a},
{0x57, 0x8c},
{0x59, 0x09},
{0x5a, 0x08},
{0x5e, 0x10},
{0x60, 0x02},
{0x6d, 0x5c},
{0x76, 0x16},
{0x7c, 0x1a},
{0x90, 0x28},
{0x91, 0x16},
{0x92, 0x1c},
{0x93, 0x24},
{0x95, 0x48},
{0x9c, 0x06},
{0xca, 0x0c},
{0xce, 0x0d},
{0xfd, 0x01},
{0xc0, 0x00},
{0xdd, 0x18},
{0xde, 0x19},
{0xdf, 0x32},
{0xe0, 0x70},
{0xfd, 0x01},
{0xc2, 0x05},
{0xd7, 0x88},
{0xd8, 0x77},
{0xd9, 0x00},
{0xfd, 0x07},
{0x00, 0xf8},
{0x01, 0x2b},
{0x05, 0x40},
{0x08, 0x03},
{0x09, 0x08},
{0x28, 0x6f},
{0x2a, 0x20},
{0x2b, 0x05},
{0x2c, 0x01},
{0x50, 0x02},
{0x51, 0x03},
{0x5e, 0x00},
{0x52, 0x00},
{0x53, 0x7c},
{0x54, 0x00},
{0x55, 0x7c},
{0x56, 0x00},
{0x57, 0x7c},
{0x58, 0x00},
{0x59, 0x7c},
{0xfd, 0x02},
{0x9a, 0x30},
{0xa8, 0x02},
{0xfd, 0x02},
{0xa9, 0x04},
{0xaa, 0xd0},
{0xab, 0x06},
{0xac, 0x68},
{0xa1, 0x09},
{0xa2, 0x04},
{0xa3, 0xc8},
{0xa5, 0x04},
{0xa6, 0x06},
{0xa7, 0x60},
{0xfd, 0x05},
{0x06, 0x80},
{0x18, 0x06},
{0x19, 0x68},
{0xfd, 0x00},
{0x24, 0x01},
{0xc0, 0x16},
{0xc1, 0x08},
{0xc2, 0x30},
{0x8e, 0x06},
{0x8f, 0x60},
{0x90, 0x04},
{0x91, 0xc8},
{0x93, 0x0e},
{0x94, 0x77},
{0x95, 0x77},
{0x96, 0x10},
{0x98, 0x88},
{0x9c, 0x1a},
{0xfd, 0x05},
{0x04, 0x40},
{0x07, 0x99},
{0x0d, 0x03},
{0x0f, 0x03},
{0x10, 0x00},
{0x11, 0x00},
{0x12, 0x0c},
{0x13, 0xcf},
{0x14, 0x00},
{0x15, 0x00},
{0xfd, 0x00},
{0x20, 0x0f},
{0xe7, 0x03},
{0xe7, 0x00},
};
static const char * const ov08d10_test_pattern_menu[] = {
"Disabled",
"Standard Color Bar",
};
struct ov08d10 {
struct v4l2_subdev sd;
struct media_pad pad;
struct v4l2_ctrl_handler ctrl_handler;
struct clk *xvclk;
/* V4L2 Controls */
struct v4l2_ctrl *link_freq;
struct v4l2_ctrl *pixel_rate;
struct v4l2_ctrl *vblank;
struct v4l2_ctrl *hblank;
struct v4l2_ctrl *vflip;
struct v4l2_ctrl *hflip;
struct v4l2_ctrl *exposure;
/* Current mode */
const struct ov08d10_mode *cur_mode;
/* To serialize asynchronus callbacks */
struct mutex mutex;
/* Streaming on/off */
bool streaming;
/* lanes index */
u8 nlanes;
const struct ov08d10_lane_cfg *priv_lane;
u8 modes_size;
};
struct ov08d10_lane_cfg {
const s64 link_freq_menu[2];
const struct ov08d10_link_freq_config link_freq_configs[2];
const struct ov08d10_mode sp_modes[3];
};
static const struct ov08d10_lane_cfg lane_cfg_2 = {
{
720000000,
360000000,
},
{{
.reg_list = {
.num_of_regs =
ARRAY_SIZE(mipi_data_rate_720mbps),
.regs = mipi_data_rate_720mbps,
}
},
{
.reg_list = {
.num_of_regs =
ARRAY_SIZE(mipi_data_rate_360mbps),
.regs = mipi_data_rate_360mbps,
}
}},
{{
.width = 3280,
.height = 2460,
.hts = 1840,
.vts_def = 2504,
.vts_min = 2504,
.reg_list = {
.num_of_regs = ARRAY_SIZE(lane_2_mode_3280x2460),
.regs = lane_2_mode_3280x2460,
},
.link_freq_index = 0,
.data_lanes = 2,
},
{
.width = 3264,
.height = 2448,
.hts = 1840,
.vts_def = 2504,
.vts_min = 2504,
.reg_list = {
.num_of_regs = ARRAY_SIZE(lane_2_mode_3264x2448),
.regs = lane_2_mode_3264x2448,
},
.link_freq_index = 0,
.data_lanes = 2,
},
{
.width = 1632,
.height = 1224,
.hts = 1912,
.vts_def = 3736,
.vts_min = 3736,
.reg_list = {
.num_of_regs = ARRAY_SIZE(lane_2_mode_1632x1224),
.regs = lane_2_mode_1632x1224,
},
.link_freq_index = 1,
.data_lanes = 2,
}}
};
static u32 ov08d10_get_format_code(struct ov08d10 *ov08d10)
{
static const u32 codes[2][2] = {
{ MEDIA_BUS_FMT_SGRBG10_1X10, MEDIA_BUS_FMT_SRGGB10_1X10},
{ MEDIA_BUS_FMT_SBGGR10_1X10, MEDIA_BUS_FMT_SGBRG10_1X10},
};
return codes[ov08d10->vflip->val][ov08d10->hflip->val];
}
static unsigned int ov08d10_modes_num(const struct ov08d10 *ov08d10)
{
unsigned int i, count = 0;
for (i = 0; i < ARRAY_SIZE(ov08d10->priv_lane->sp_modes); i++) {
if (ov08d10->priv_lane->sp_modes[i].width == 0)
break;
count++;
}
return count;
}
static u64 to_rate(const s64 *link_freq_menu,
u32 f_index, u8 nlanes)
{
u64 pixel_rate = link_freq_menu[f_index] * 2 * nlanes;
do_div(pixel_rate, OV08D10_RGB_DEPTH);
return pixel_rate;
}
static u64 to_pixels_per_line(const s64 *link_freq_menu, u32 hts,
u32 f_index, u8 nlanes)
{
u64 ppl = hts * to_rate(link_freq_menu, f_index, nlanes);
do_div(ppl, OV08D10_SCLK);
return ppl;
}
static int ov08d10_write_reg_list(struct ov08d10 *ov08d10,
const struct ov08d10_reg_list *r_list)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
unsigned int i;
int ret;
for (i = 0; i < r_list->num_of_regs; i++) {
ret = i2c_smbus_write_byte_data(client, r_list->regs[i].address,
r_list->regs[i].val);
if (ret) {
dev_err_ratelimited(&client->dev,
"failed to write reg 0x%2.2x. error = %d",
r_list->regs[i].address, ret);
return ret;
}
}
return 0;
}
static int ov08d10_update_analog_gain(struct ov08d10 *ov08d10, u32 a_gain)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
u8 val;
int ret;
val = ((a_gain >> 3) & 0xFF);
/* CIS control registers */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x01);
if (ret < 0)
return ret;
/* update AGAIN */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_ANALOG_GAIN, val);
if (ret < 0)
return ret;
return i2c_smbus_write_byte_data(client,
OV08D10_REG_GLOBAL_EFFECTIVE, 0x01);
}
static int ov08d10_update_digital_gain(struct ov08d10 *ov08d10, u32 d_gain)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
u8 val;
int ret;
d_gain = (d_gain >> 1);
/* CIS control registers */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x01);
if (ret < 0)
return ret;
val = ((d_gain >> 8) & 0x3F);
/* update DGAIN */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_MWB_DGAIN_C, val);
if (ret < 0)
return ret;
val = d_gain & 0xFF;
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_MWB_DGAIN_F, val);
if (ret < 0)
return ret;
return i2c_smbus_write_byte_data(client,
OV08D10_REG_GLOBAL_EFFECTIVE, 0x01);
}
static int ov08d10_set_exposure(struct ov08d10 *ov08d10, u32 exposure)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
u8 val;
u8 hts_h, hts_l;
u32 hts, cur_vts, exp_cal;
int ret;
cur_vts = ov08d10->cur_mode->vts_def;
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x01);
if (ret < 0)
return ret;
hts_h = i2c_smbus_read_byte_data(client, 0x37);
hts_l = i2c_smbus_read_byte_data(client, 0x38);
hts = ((hts_h << 8) | (hts_l));
exp_cal = 66 * OV08D10_ROWCLK / hts;
exposure = exposure * exp_cal / (cur_vts - OV08D10_EXPOSURE_MAX_MARGIN);
/* CIS control registers */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x01);
if (ret < 0)
return ret;
/* update exposure */
val = ((exposure >> 16) & 0xFF);
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_EXPOSURE_H, val);
if (ret < 0)
return ret;
val = ((exposure >> 8) & 0xFF);
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_EXPOSURE_M, val);
if (ret < 0)
return ret;
val = exposure & 0xFF;
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_EXPOSURE_L, val);
if (ret < 0)
return ret;
return i2c_smbus_write_byte_data(client,
OV08D10_REG_GLOBAL_EFFECTIVE, 0x01);
}
static int ov08d10_set_vblank(struct ov08d10 *ov08d10, u32 vblank)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
u8 val;
int ret;
/* CIS control registers */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x01);
if (ret < 0)
return ret;
val = ((vblank >> 8) & 0xFF);
/* update vblank */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_VTS_H, val);
if (ret < 0)
return ret;
val = vblank & 0xFF;
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_VTS_L, val);
if (ret < 0)
return ret;
return i2c_smbus_write_byte_data(client,
OV08D10_REG_GLOBAL_EFFECTIVE, 0x01);
}
static int ov08d10_test_pattern(struct ov08d10 *ov08d10, u32 pattern)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
u8 val;
int ret;
if (pattern)
val = OV08D10_TEST_PATTERN_ENABLE;
else
val = OV08D10_TEST_PATTERN_DISABLE;
/* CIS control registers */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x01);
if (ret < 0)
return ret;
ret = i2c_smbus_write_byte_data(client,
OV08D10_REG_TEST_PATTERN, val);
if (ret < 0)
return ret;
return i2c_smbus_write_byte_data(client,
OV08D10_REG_GLOBAL_EFFECTIVE, 0x01);
}
static int ov08d10_set_ctrl_flip(struct ov08d10 *ov08d10, u32 ctrl_val)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
u8 val;
int ret;
/* System control registers */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x01);
if (ret < 0)
return ret;
ret = i2c_smbus_read_byte_data(client, OV08D10_REG_FLIP_OPT);
if (ret < 0)
return ret;
val = ret | (ctrl_val & OV08D10_REG_FLIP_MASK);
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x01);
if (ret < 0)
return ret;
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_FLIP_OPT, val);
if (ret < 0)
return ret;
return i2c_smbus_write_byte_data(client,
OV08D10_REG_GLOBAL_EFFECTIVE, 0x01);
}
static int ov08d10_set_ctrl(struct v4l2_ctrl *ctrl)
{
struct ov08d10 *ov08d10 = container_of(ctrl->handler,
struct ov08d10, ctrl_handler);
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
s64 exposure_max;
int ret;
/* Propagate change of current control to all related controls */
if (ctrl->id == V4L2_CID_VBLANK) {
/* Update max exposure while meeting expected vblanking */
exposure_max = ov08d10->cur_mode->height + ctrl->val -
OV08D10_EXPOSURE_MAX_MARGIN;
__v4l2_ctrl_modify_range(ov08d10->exposure,
ov08d10->exposure->minimum,
exposure_max, ov08d10->exposure->step,
exposure_max);
}
/* V4L2 controls values will be applied only when power is already up */
if (!pm_runtime_get_if_in_use(&client->dev))
return 0;
switch (ctrl->id) {
case V4L2_CID_ANALOGUE_GAIN:
ret = ov08d10_update_analog_gain(ov08d10, ctrl->val);
break;
case V4L2_CID_DIGITAL_GAIN:
ret = ov08d10_update_digital_gain(ov08d10, ctrl->val);
break;
case V4L2_CID_EXPOSURE:
ret = ov08d10_set_exposure(ov08d10, ctrl->val);
break;
case V4L2_CID_VBLANK:
ret = ov08d10_set_vblank(ov08d10, ctrl->val);
break;
case V4L2_CID_TEST_PATTERN:
ret = ov08d10_test_pattern(ov08d10, ctrl->val);
break;
case V4L2_CID_HFLIP:
case V4L2_CID_VFLIP:
ret = ov08d10_set_ctrl_flip(ov08d10,
ov08d10->hflip->val |
ov08d10->vflip->val << 1);
break;
default:
ret = -EINVAL;
break;
}
pm_runtime_put(&client->dev);
return ret;
}
static const struct v4l2_ctrl_ops ov08d10_ctrl_ops = {
.s_ctrl = ov08d10_set_ctrl,
};
static int ov08d10_init_controls(struct ov08d10 *ov08d10)
{
struct v4l2_ctrl_handler *ctrl_hdlr;
u8 link_freq_size;
s64 exposure_max;
s64 vblank_def;
s64 vblank_min;
s64 h_blank;
s64 pixel_rate_max;
const struct ov08d10_mode *mode;
int ret;
ctrl_hdlr = &ov08d10->ctrl_handler;
ret = v4l2_ctrl_handler_init(ctrl_hdlr, 8);
if (ret)
return ret;
ctrl_hdlr->lock = &ov08d10->mutex;
link_freq_size = ARRAY_SIZE(ov08d10->priv_lane->link_freq_menu);
ov08d10->link_freq =
v4l2_ctrl_new_int_menu(ctrl_hdlr, &ov08d10_ctrl_ops,
V4L2_CID_LINK_FREQ,
link_freq_size - 1,
0,
ov08d10->priv_lane->link_freq_menu);
if (ov08d10->link_freq)
ov08d10->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
pixel_rate_max = to_rate(ov08d10->priv_lane->link_freq_menu, 0,
ov08d10->cur_mode->data_lanes);
ov08d10->pixel_rate =
v4l2_ctrl_new_std(ctrl_hdlr, &ov08d10_ctrl_ops,
V4L2_CID_PIXEL_RATE, 0, pixel_rate_max, 1,
pixel_rate_max);
mode = ov08d10->cur_mode;
vblank_def = mode->vts_def - mode->height;
vblank_min = mode->vts_min - mode->height;
ov08d10->vblank =
v4l2_ctrl_new_std(ctrl_hdlr, &ov08d10_ctrl_ops,
V4L2_CID_VBLANK, vblank_min,
OV08D10_VTS_MAX - mode->height, 1,
vblank_def);
h_blank = to_pixels_per_line(ov08d10->priv_lane->link_freq_menu,
mode->hts, mode->link_freq_index,
mode->data_lanes) -
mode->width;
ov08d10->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov08d10_ctrl_ops,
V4L2_CID_HBLANK, h_blank, h_blank,
1, h_blank);
if (ov08d10->hblank)
ov08d10->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
v4l2_ctrl_new_std(ctrl_hdlr, &ov08d10_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
OV08D10_ANAL_GAIN_MIN, OV08D10_ANAL_GAIN_MAX,
OV08D10_ANAL_GAIN_STEP, OV08D10_ANAL_GAIN_MIN);
v4l2_ctrl_new_std(ctrl_hdlr, &ov08d10_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
OV08D10_DGTL_GAIN_MIN, OV08D10_DGTL_GAIN_MAX,
OV08D10_DGTL_GAIN_STEP, OV08D10_DGTL_GAIN_DEFAULT);
exposure_max = mode->vts_def - OV08D10_EXPOSURE_MAX_MARGIN;
ov08d10->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov08d10_ctrl_ops,
V4L2_CID_EXPOSURE,
OV08D10_EXPOSURE_MIN,
exposure_max,
OV08D10_EXPOSURE_STEP,
exposure_max);
v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &ov08d10_ctrl_ops,
V4L2_CID_TEST_PATTERN,
ARRAY_SIZE(ov08d10_test_pattern_menu) - 1,
0, 0, ov08d10_test_pattern_menu);
ov08d10->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &ov08d10_ctrl_ops,
V4L2_CID_HFLIP, 0, 1, 1, 0);
media: i2c: ov08d10: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips The driver changes the Bayer order based on the flips, but does not define the control correctly with the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag. Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-12-05 23:21:49 +08:00
if (ov08d10->hflip)
ov08d10->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
media: i2c: Add ov08d10 camera sensor driver Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su <jimmy.su@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-12 13:42:55 +08:00
ov08d10->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &ov08d10_ctrl_ops,
V4L2_CID_VFLIP, 0, 1, 1, 0);
media: i2c: ov08d10: Set V4L2_CTRL_FLAG_MODIFY_LAYOUT on flips The driver changes the Bayer order based on the flips, but does not define the control correctly with the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag. Add the V4L2_CTRL_FLAG_MODIFY_LAYOUT flag. Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-12-05 23:21:49 +08:00
if (ov08d10->vflip)
ov08d10->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
media: i2c: Add ov08d10 camera sensor driver Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su <jimmy.su@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-12 13:42:55 +08:00
if (ctrl_hdlr->error)
return ctrl_hdlr->error;
ov08d10->sd.ctrl_handler = ctrl_hdlr;
return 0;
}
static void ov08d10_update_pad_format(struct ov08d10 *ov08d10,
const struct ov08d10_mode *mode,
struct v4l2_mbus_framefmt *fmt)
{
fmt->width = mode->width;
fmt->height = mode->height;
fmt->code = ov08d10_get_format_code(ov08d10);
fmt->field = V4L2_FIELD_NONE;
}
static int ov08d10_start_streaming(struct ov08d10 *ov08d10)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
const struct ov08d10_reg_list *reg_list;
int link_freq_index, ret;
link_freq_index = ov08d10->cur_mode->link_freq_index;
reg_list =
&ov08d10->priv_lane->link_freq_configs[link_freq_index].reg_list;
/* soft reset */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x00);
if (ret < 0) {
dev_err(&client->dev, "failed to reset sensor");
return ret;
}
ret = i2c_smbus_write_byte_data(client, 0x20, 0x0e);
if (ret < 0) {
dev_err(&client->dev, "failed to reset sensor");
return ret;
}
usleep_range(3000, 4000);
ret = i2c_smbus_write_byte_data(client, 0x20, 0x0b);
if (ret < 0) {
dev_err(&client->dev, "failed to reset sensor");
return ret;
}
/* update sensor setting */
ret = ov08d10_write_reg_list(ov08d10, reg_list);
if (ret) {
dev_err(&client->dev, "failed to set plls");
return ret;
}
reg_list = &ov08d10->cur_mode->reg_list;
ret = ov08d10_write_reg_list(ov08d10, reg_list);
if (ret) {
dev_err(&client->dev, "failed to set mode");
return ret;
}
ret = __v4l2_ctrl_handler_setup(ov08d10->sd.ctrl_handler);
if (ret)
return ret;
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x00);
if (ret < 0)
return ret;
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_MODE_SELECT,
OV08D10_MODE_STREAMING);
if (ret < 0)
return ret;
return i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x01);
}
static void ov08d10_stop_streaming(struct ov08d10 *ov08d10)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
int ret;
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x00);
if (ret < 0) {
dev_err(&client->dev, "failed to stop streaming");
return;
}
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_MODE_SELECT,
OV08D10_MODE_STANDBY);
if (ret < 0) {
dev_err(&client->dev, "failed to stop streaming");
return;
}
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x01);
if (ret < 0) {
dev_err(&client->dev, "failed to stop streaming");
return;
}
}
static int ov08d10_set_stream(struct v4l2_subdev *sd, int enable)
{
struct ov08d10 *ov08d10 = to_ov08d10(sd);
struct i2c_client *client = v4l2_get_subdevdata(sd);
int ret = 0;
if (ov08d10->streaming == enable)
return 0;
mutex_lock(&ov08d10->mutex);
if (enable) {
ret = pm_runtime_resume_and_get(&client->dev);
if (ret < 0) {
mutex_unlock(&ov08d10->mutex);
return ret;
}
ret = ov08d10_start_streaming(ov08d10);
if (ret) {
enable = 0;
ov08d10_stop_streaming(ov08d10);
pm_runtime_put(&client->dev);
}
} else {
ov08d10_stop_streaming(ov08d10);
pm_runtime_put(&client->dev);
}
ov08d10->streaming = enable;
/* vflip and hflip cannot change during streaming */
__v4l2_ctrl_grab(ov08d10->vflip, enable);
__v4l2_ctrl_grab(ov08d10->hflip, enable);
mutex_unlock(&ov08d10->mutex);
return ret;
}
static int __maybe_unused ov08d10_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov08d10 *ov08d10 = to_ov08d10(sd);
mutex_lock(&ov08d10->mutex);
if (ov08d10->streaming)
ov08d10_stop_streaming(ov08d10);
mutex_unlock(&ov08d10->mutex);
return 0;
}
static int __maybe_unused ov08d10_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov08d10 *ov08d10 = to_ov08d10(sd);
int ret;
mutex_lock(&ov08d10->mutex);
if (ov08d10->streaming) {
ret = ov08d10_start_streaming(ov08d10);
if (ret) {
ov08d10->streaming = false;
ov08d10_stop_streaming(ov08d10);
mutex_unlock(&ov08d10->mutex);
return ret;
}
}
mutex_unlock(&ov08d10->mutex);
return 0;
}
static int ov08d10_set_format(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct ov08d10 *ov08d10 = to_ov08d10(sd);
const struct ov08d10_mode *mode;
s32 vblank_def, h_blank;
s64 pixel_rate;
mode = v4l2_find_nearest_size(ov08d10->priv_lane->sp_modes,
ov08d10->modes_size,
width, height, fmt->format.width,
fmt->format.height);
mutex_lock(&ov08d10->mutex);
ov08d10_update_pad_format(ov08d10, mode, &fmt->format);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
*v4l2_subdev_get_try_format(sd, sd_state, fmt->pad) =
fmt->format;
} else {
ov08d10->cur_mode = mode;
__v4l2_ctrl_s_ctrl(ov08d10->link_freq, mode->link_freq_index);
pixel_rate = to_rate(ov08d10->priv_lane->link_freq_menu,
mode->link_freq_index,
ov08d10->cur_mode->data_lanes);
__v4l2_ctrl_s_ctrl_int64(ov08d10->pixel_rate, pixel_rate);
/* Update limits and set FPS to default */
vblank_def = mode->vts_def - mode->height;
__v4l2_ctrl_modify_range(ov08d10->vblank,
mode->vts_min - mode->height,
OV08D10_VTS_MAX - mode->height, 1,
vblank_def);
__v4l2_ctrl_s_ctrl(ov08d10->vblank, vblank_def);
h_blank = to_pixels_per_line(ov08d10->priv_lane->link_freq_menu,
mode->hts,
mode->link_freq_index,
ov08d10->cur_mode->data_lanes)
- mode->width;
__v4l2_ctrl_modify_range(ov08d10->hblank, h_blank, h_blank, 1,
h_blank);
}
mutex_unlock(&ov08d10->mutex);
return 0;
}
static int ov08d10_get_format(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_format *fmt)
{
struct ov08d10 *ov08d10 = to_ov08d10(sd);
mutex_lock(&ov08d10->mutex);
if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
fmt->format = *v4l2_subdev_get_try_format(&ov08d10->sd,
sd_state,
fmt->pad);
else
ov08d10_update_pad_format(ov08d10, ov08d10->cur_mode,
&fmt->format);
mutex_unlock(&ov08d10->mutex);
return 0;
}
static int ov08d10_enum_mbus_code(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_mbus_code_enum *code)
{
struct ov08d10 *ov08d10 = to_ov08d10(sd);
if (code->index > 0)
return -EINVAL;
mutex_lock(&ov08d10->mutex);
code->code = ov08d10_get_format_code(ov08d10);
mutex_unlock(&ov08d10->mutex);
return 0;
}
static int ov08d10_enum_frame_size(struct v4l2_subdev *sd,
struct v4l2_subdev_state *sd_state,
struct v4l2_subdev_frame_size_enum *fse)
{
struct ov08d10 *ov08d10 = to_ov08d10(sd);
if (fse->index >= ov08d10->modes_size)
return -EINVAL;
mutex_lock(&ov08d10->mutex);
media: i2c: ov08d10: Unlock on error in ov08d10_enum_frame_size() This error path needs to drop the mutex to avoid a deadlock. Fixes: 7be91e02ed57 ("media: i2c: Add ov08d10 camera sensor driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-02-01 21:00:16 +08:00
if (fse->code != ov08d10_get_format_code(ov08d10)) {
mutex_unlock(&ov08d10->mutex);
media: i2c: Add ov08d10 camera sensor driver Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su <jimmy.su@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-12 13:42:55 +08:00
return -EINVAL;
media: i2c: ov08d10: Unlock on error in ov08d10_enum_frame_size() This error path needs to drop the mutex to avoid a deadlock. Fixes: 7be91e02ed57 ("media: i2c: Add ov08d10 camera sensor driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-02-01 21:00:16 +08:00
}
media: i2c: Add ov08d10 camera sensor driver Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su <jimmy.su@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-12 13:42:55 +08:00
mutex_unlock(&ov08d10->mutex);
fse->min_width = ov08d10->priv_lane->sp_modes[fse->index].width;
fse->max_width = fse->min_width;
fse->min_height = ov08d10->priv_lane->sp_modes[fse->index].height;
fse->max_height = fse->min_height;
return 0;
}
static int ov08d10_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
{
struct ov08d10 *ov08d10 = to_ov08d10(sd);
mutex_lock(&ov08d10->mutex);
ov08d10_update_pad_format(ov08d10, &ov08d10->priv_lane->sp_modes[0],
v4l2_subdev_get_try_format(sd, fh->state, 0));
mutex_unlock(&ov08d10->mutex);
return 0;
}
static const struct v4l2_subdev_video_ops ov08d10_video_ops = {
.s_stream = ov08d10_set_stream,
};
static const struct v4l2_subdev_pad_ops ov08d10_pad_ops = {
.set_fmt = ov08d10_set_format,
.get_fmt = ov08d10_get_format,
.enum_mbus_code = ov08d10_enum_mbus_code,
.enum_frame_size = ov08d10_enum_frame_size,
};
static const struct v4l2_subdev_ops ov08d10_subdev_ops = {
.video = &ov08d10_video_ops,
.pad = &ov08d10_pad_ops,
};
static const struct v4l2_subdev_internal_ops ov08d10_internal_ops = {
.open = ov08d10_open,
};
static int ov08d10_identify_module(struct ov08d10 *ov08d10)
{
struct i2c_client *client = v4l2_get_subdevdata(&ov08d10->sd);
u32 val;
u16 chip_id;
int ret;
/* System control registers */
ret = i2c_smbus_write_byte_data(client, OV08D10_REG_PAGE, 0x00);
if (ret < 0)
return ret;
/* Validate the chip ID */
ret = i2c_smbus_read_byte_data(client, OV08D10_REG_CHIP_ID_0);
if (ret < 0)
return ret;
val = ret << 8;
ret = i2c_smbus_read_byte_data(client, OV08D10_REG_CHIP_ID_1);
if (ret < 0)
return ret;
chip_id = val | ret;
if ((chip_id & OV08D10_ID_MASK) != OV08D10_CHIP_ID) {
dev_err(&client->dev, "unexpected sensor id(0x%04x)\n",
chip_id);
return -EINVAL;
}
return 0;
}
static int ov08d10_get_hwcfg(struct ov08d10 *ov08d10, struct device *dev)
{
struct fwnode_handle *ep;
struct fwnode_handle *fwnode = dev_fwnode(dev);
struct v4l2_fwnode_endpoint bus_cfg = {
.bus_type = V4L2_MBUS_CSI2_DPHY
};
u32 xvclk_rate;
unsigned int i, j;
int ret;
if (!fwnode)
return -ENXIO;
ret = fwnode_property_read_u32(fwnode, "clock-frequency", &xvclk_rate);
if (ret)
return ret;
if (xvclk_rate != OV08D10_XVCLK_19_2)
dev_warn(dev, "external clock rate %u is unsupported",
xvclk_rate);
ep = fwnode_graph_get_next_endpoint(fwnode, NULL);
if (!ep)
return -ENXIO;
ret = v4l2_fwnode_endpoint_alloc_parse(ep, &bus_cfg);
fwnode_handle_put(ep);
if (ret)
return ret;
/* Get number of data lanes */
if (bus_cfg.bus.mipi_csi2.num_data_lanes != 2) {
dev_err(dev, "number of CSI2 data lanes %d is not supported",
bus_cfg.bus.mipi_csi2.num_data_lanes);
ret = -EINVAL;
goto check_hwcfg_error;
}
dev_dbg(dev, "Using %u data lanes\n", ov08d10->cur_mode->data_lanes);
ov08d10->priv_lane = &lane_cfg_2;
ov08d10->modes_size = ov08d10_modes_num(ov08d10);
if (!bus_cfg.nr_of_link_frequencies) {
dev_err(dev, "no link frequencies defined");
ret = -EINVAL;
goto check_hwcfg_error;
}
for (i = 0; i < ARRAY_SIZE(ov08d10->priv_lane->link_freq_menu); i++) {
for (j = 0; j < bus_cfg.nr_of_link_frequencies; j++) {
if (ov08d10->priv_lane->link_freq_menu[i] ==
bus_cfg.link_frequencies[j])
break;
}
if (j == bus_cfg.nr_of_link_frequencies) {
dev_err(dev, "no link frequency %lld supported",
ov08d10->priv_lane->link_freq_menu[i]);
ret = -EINVAL;
goto check_hwcfg_error;
}
}
check_hwcfg_error:
v4l2_fwnode_endpoint_free(&bus_cfg);
return ret;
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 16:02:30 +08:00
static void ov08d10_remove(struct i2c_client *client)
media: i2c: Add ov08d10 camera sensor driver Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su <jimmy.su@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-12 13:42:55 +08:00
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
struct ov08d10 *ov08d10 = to_ov08d10(sd);
v4l2_async_unregister_subdev(sd);
media_entity_cleanup(&sd->entity);
v4l2_ctrl_handler_free(sd->ctrl_handler);
pm_runtime_disable(&client->dev);
mutex_destroy(&ov08d10->mutex);
}
static int ov08d10_probe(struct i2c_client *client)
{
struct ov08d10 *ov08d10;
int ret;
ov08d10 = devm_kzalloc(&client->dev, sizeof(*ov08d10), GFP_KERNEL);
if (!ov08d10)
return -ENOMEM;
ret = ov08d10_get_hwcfg(ov08d10, &client->dev);
if (ret) {
dev_err(&client->dev, "failed to get HW configuration: %d",
ret);
return ret;
}
v4l2_i2c_subdev_init(&ov08d10->sd, client, &ov08d10_subdev_ops);
ret = ov08d10_identify_module(ov08d10);
if (ret) {
dev_err(&client->dev, "failed to find sensor: %d", ret);
return ret;
}
mutex_init(&ov08d10->mutex);
ov08d10->cur_mode = &ov08d10->priv_lane->sp_modes[0];
ret = ov08d10_init_controls(ov08d10);
if (ret) {
dev_err(&client->dev, "failed to init controls: %d", ret);
goto probe_error_v4l2_ctrl_handler_free;
}
ov08d10->sd.internal_ops = &ov08d10_internal_ops;
ov08d10->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
ov08d10->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
ov08d10->pad.flags = MEDIA_PAD_FL_SOURCE;
ret = media_entity_pads_init(&ov08d10->sd.entity, 1, &ov08d10->pad);
if (ret) {
dev_err(&client->dev, "failed to init entity pads: %d", ret);
goto probe_error_v4l2_ctrl_handler_free;
}
ret = v4l2_async_register_subdev_sensor(&ov08d10->sd);
if (ret < 0) {
dev_err(&client->dev, "failed to register V4L2 subdev: %d",
ret);
goto probe_error_media_entity_cleanup;
}
/*
* Device is already turned on by i2c-core with ACPI domain PM.
* Enable runtime PM and turn off the device.
*/
pm_runtime_set_active(&client->dev);
pm_runtime_enable(&client->dev);
pm_runtime_idle(&client->dev);
return 0;
probe_error_media_entity_cleanup:
media_entity_cleanup(&ov08d10->sd.entity);
probe_error_v4l2_ctrl_handler_free:
v4l2_ctrl_handler_free(ov08d10->sd.ctrl_handler);
mutex_destroy(&ov08d10->mutex);
return ret;
}
static const struct dev_pm_ops ov08d10_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(ov08d10_suspend, ov08d10_resume)
};
#ifdef CONFIG_ACPI
static const struct acpi_device_id ov08d10_acpi_ids[] = {
{ "OVTI08D1" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(acpi, ov08d10_acpi_ids);
#endif
static struct i2c_driver ov08d10_i2c_driver = {
.driver = {
.name = "ov08d10",
.pm = &ov08d10_pm_ops,
.acpi_match_table = ACPI_PTR(ov08d10_acpi_ids),
},
media: Switch i2c drivers back to use .probe() After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then commit 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-05-14 20:04:07 +08:00
.probe = ov08d10_probe,
media: i2c: Add ov08d10 camera sensor driver Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su <jimmy.su@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-01-12 13:42:55 +08:00
.remove = ov08d10_remove,
};
module_i2c_driver(ov08d10_i2c_driver);
MODULE_AUTHOR("Su, Jimmy <jimmy.su@intel.com>");
MODULE_DESCRIPTION("OmniVision ov08d10 sensor driver");
MODULE_LICENSE("GPL v2");