2019-03-26 04:31:55 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0+
|
|
|
|
//
|
|
|
|
// Regulator driver for DA9063 PMIC series
|
|
|
|
//
|
|
|
|
// Copyright 2012 Dialog Semiconductors Ltd.
|
|
|
|
// Copyright 2013 Philipp Zabel, Pengutronix
|
|
|
|
//
|
|
|
|
// Author: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
|
2014-02-12 17:57:52 +08:00
|
|
|
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/regulator/driver.h>
|
|
|
|
#include <linux/regulator/machine.h>
|
|
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#include <linux/mfd/da9063/core.h>
|
|
|
|
#include <linux/mfd/da9063/registers.h>
|
|
|
|
|
|
|
|
|
|
|
|
/* Definition for registering regmap bit fields using a mask */
|
|
|
|
#define BFIELD(_reg, _mask) \
|
|
|
|
REG_FIELD(_reg, __builtin_ffs((int)_mask) - 1, \
|
|
|
|
sizeof(unsigned int) * 8 - __builtin_clz((_mask)) - 1)
|
|
|
|
|
2019-05-20 17:34:45 +08:00
|
|
|
/* DA9063 and DA9063L regulator IDs */
|
|
|
|
enum {
|
|
|
|
/* BUCKs */
|
|
|
|
DA9063_ID_BCORE1,
|
|
|
|
DA9063_ID_BCORE2,
|
|
|
|
DA9063_ID_BPRO,
|
|
|
|
DA9063_ID_BMEM,
|
|
|
|
DA9063_ID_BIO,
|
|
|
|
DA9063_ID_BPERI,
|
|
|
|
|
|
|
|
/* BCORE1 and BCORE2 in merged mode */
|
|
|
|
DA9063_ID_BCORES_MERGED,
|
|
|
|
/* BMEM and BIO in merged mode */
|
|
|
|
DA9063_ID_BMEM_BIO_MERGED,
|
|
|
|
/* When two BUCKs are merged, they cannot be reused separately */
|
|
|
|
|
|
|
|
/* LDOs on both DA9063 and DA9063L */
|
|
|
|
DA9063_ID_LDO3,
|
|
|
|
DA9063_ID_LDO7,
|
|
|
|
DA9063_ID_LDO8,
|
|
|
|
DA9063_ID_LDO9,
|
|
|
|
DA9063_ID_LDO11,
|
|
|
|
|
|
|
|
/* DA9063-only LDOs */
|
|
|
|
DA9063_ID_LDO1,
|
|
|
|
DA9063_ID_LDO2,
|
|
|
|
DA9063_ID_LDO4,
|
|
|
|
DA9063_ID_LDO5,
|
|
|
|
DA9063_ID_LDO6,
|
|
|
|
DA9063_ID_LDO10,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Old regulator platform data */
|
|
|
|
struct da9063_regulator_data {
|
|
|
|
int id;
|
|
|
|
struct regulator_init_data *initdata;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct da9063_regulators_pdata {
|
|
|
|
unsigned n_regulators;
|
|
|
|
struct da9063_regulator_data *regulator_data;
|
|
|
|
};
|
|
|
|
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
/* Regulator capabilities and registers description */
|
|
|
|
struct da9063_regulator_info {
|
|
|
|
struct regulator_desc desc;
|
|
|
|
|
|
|
|
/* DA9063 main register fields */
|
|
|
|
struct reg_field mode; /* buck mode of operation */
|
|
|
|
struct reg_field suspend;
|
|
|
|
struct reg_field sleep;
|
|
|
|
struct reg_field suspend_sleep;
|
|
|
|
unsigned int suspend_vsel_reg;
|
|
|
|
|
|
|
|
/* DA9063 event detection bit */
|
|
|
|
struct reg_field oc_event;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Macros for LDO */
|
|
|
|
#define DA9063_LDO(chip, regl_name, min_mV, step_mV, max_mV) \
|
|
|
|
.desc.id = chip##_ID_##regl_name, \
|
|
|
|
.desc.name = __stringify(chip##_##regl_name), \
|
|
|
|
.desc.ops = &da9063_ldo_ops, \
|
|
|
|
.desc.min_uV = (min_mV) * 1000, \
|
|
|
|
.desc.uV_step = (step_mV) * 1000, \
|
2014-02-12 17:57:52 +08:00
|
|
|
.desc.n_voltages = (((max_mV) - (min_mV))/(step_mV) + 1 \
|
|
|
|
+ (DA9063_V##regl_name##_BIAS)), \
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
.desc.enable_reg = DA9063_REG_##regl_name##_CONT, \
|
|
|
|
.desc.enable_mask = DA9063_LDO_EN, \
|
|
|
|
.desc.vsel_reg = DA9063_REG_V##regl_name##_A, \
|
|
|
|
.desc.vsel_mask = DA9063_V##regl_name##_MASK, \
|
|
|
|
.desc.linear_min_sel = DA9063_V##regl_name##_BIAS, \
|
|
|
|
.sleep = BFIELD(DA9063_REG_V##regl_name##_A, DA9063_LDO_SL), \
|
|
|
|
.suspend_sleep = BFIELD(DA9063_REG_V##regl_name##_B, DA9063_LDO_SL), \
|
|
|
|
.suspend_vsel_reg = DA9063_REG_V##regl_name##_B
|
|
|
|
|
|
|
|
/* Macros for voltage DC/DC converters (BUCKs) */
|
2019-03-04 21:16:03 +08:00
|
|
|
#define DA9063_BUCK(chip, regl_name, min_mV, step_mV, max_mV, limits_array, \
|
|
|
|
creg, cmask) \
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
.desc.id = chip##_ID_##regl_name, \
|
|
|
|
.desc.name = __stringify(chip##_##regl_name), \
|
|
|
|
.desc.ops = &da9063_buck_ops, \
|
|
|
|
.desc.min_uV = (min_mV) * 1000, \
|
|
|
|
.desc.uV_step = (step_mV) * 1000, \
|
|
|
|
.desc.n_voltages = ((max_mV) - (min_mV))/(step_mV) + 1, \
|
2019-03-04 21:16:03 +08:00
|
|
|
.desc.csel_reg = (creg), \
|
|
|
|
.desc.csel_mask = (cmask), \
|
|
|
|
.desc.curr_table = limits_array, \
|
|
|
|
.desc.n_current_limits = ARRAY_SIZE(limits_array)
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
|
|
|
|
#define DA9063_BUCK_COMMON_FIELDS(regl_name) \
|
|
|
|
.desc.enable_reg = DA9063_REG_##regl_name##_CONT, \
|
|
|
|
.desc.enable_mask = DA9063_BUCK_EN, \
|
|
|
|
.desc.vsel_reg = DA9063_REG_V##regl_name##_A, \
|
|
|
|
.desc.vsel_mask = DA9063_VBUCK_MASK, \
|
|
|
|
.desc.linear_min_sel = DA9063_VBUCK_BIAS, \
|
|
|
|
.sleep = BFIELD(DA9063_REG_V##regl_name##_A, DA9063_BUCK_SL), \
|
|
|
|
.suspend_sleep = BFIELD(DA9063_REG_V##regl_name##_B, DA9063_BUCK_SL), \
|
|
|
|
.suspend_vsel_reg = DA9063_REG_V##regl_name##_B, \
|
|
|
|
.mode = BFIELD(DA9063_REG_##regl_name##_CFG, DA9063_BUCK_MODE_MASK)
|
|
|
|
|
|
|
|
/* Defines asignment of regulators info table to chip model */
|
|
|
|
struct da9063_dev_model {
|
|
|
|
const struct da9063_regulator_info *regulator_info;
|
|
|
|
unsigned n_regulators;
|
2018-06-11 19:58:45 +08:00
|
|
|
enum da9063_type type;
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
};
|
|
|
|
|
|
|
|
/* Single regulator settings */
|
|
|
|
struct da9063_regulator {
|
|
|
|
struct regulator_desc desc;
|
|
|
|
struct regulator_dev *rdev;
|
|
|
|
struct da9063 *hw;
|
|
|
|
const struct da9063_regulator_info *info;
|
|
|
|
|
|
|
|
struct regmap_field *mode;
|
|
|
|
struct regmap_field *suspend;
|
|
|
|
struct regmap_field *sleep;
|
|
|
|
struct regmap_field *suspend_sleep;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Encapsulates all information for the regulators driver */
|
|
|
|
struct da9063_regulators {
|
|
|
|
unsigned n_regulators;
|
|
|
|
/* Array size to be defined during init. Keep at end. */
|
|
|
|
struct da9063_regulator regulator[0];
|
|
|
|
};
|
|
|
|
|
|
|
|
/* BUCK modes for DA9063 */
|
|
|
|
enum {
|
|
|
|
BUCK_MODE_MANUAL, /* 0 */
|
|
|
|
BUCK_MODE_SLEEP, /* 1 */
|
|
|
|
BUCK_MODE_SYNC, /* 2 */
|
|
|
|
BUCK_MODE_AUTO /* 3 */
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Regulator operations */
|
|
|
|
|
|
|
|
/* Current limits array (in uA) for BCORE1, BCORE2, BPRO.
|
|
|
|
Entry indexes corresponds to register values. */
|
2019-03-04 21:16:03 +08:00
|
|
|
static const unsigned int da9063_buck_a_limits[] = {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
500000, 600000, 700000, 800000, 900000, 1000000, 1100000, 1200000,
|
|
|
|
1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Current limits array (in uA) for BMEM, BIO, BPERI.
|
|
|
|
Entry indexes corresponds to register values. */
|
2019-03-04 21:16:03 +08:00
|
|
|
static const unsigned int da9063_buck_b_limits[] = {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000,
|
|
|
|
2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Current limits array (in uA) for merged BCORE1 and BCORE2.
|
|
|
|
Entry indexes corresponds to register values. */
|
2019-03-04 21:16:03 +08:00
|
|
|
static const unsigned int da9063_bcores_merged_limits[] = {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
1000000, 1200000, 1400000, 1600000, 1800000, 2000000, 2200000, 2400000,
|
|
|
|
2600000, 2800000, 3000000, 3200000, 3400000, 3600000, 3800000, 4000000
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Current limits array (in uA) for merged BMEM and BIO.
|
|
|
|
Entry indexes corresponds to register values. */
|
2019-03-04 21:16:03 +08:00
|
|
|
static const unsigned int da9063_bmem_bio_merged_limits[] = {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
3000000, 3200000, 3400000, 3600000, 3800000, 4000000, 4200000, 4400000,
|
|
|
|
4600000, 4800000, 5000000, 5200000, 5400000, 5600000, 5800000, 6000000
|
|
|
|
};
|
|
|
|
|
|
|
|
static int da9063_buck_set_mode(struct regulator_dev *rdev, unsigned mode)
|
|
|
|
{
|
|
|
|
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
|
|
|
|
unsigned val;
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case REGULATOR_MODE_FAST:
|
|
|
|
val = BUCK_MODE_SYNC;
|
|
|
|
break;
|
|
|
|
case REGULATOR_MODE_NORMAL:
|
|
|
|
val = BUCK_MODE_AUTO;
|
|
|
|
break;
|
|
|
|
case REGULATOR_MODE_STANDBY:
|
|
|
|
val = BUCK_MODE_SLEEP;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return regmap_field_write(regl->mode, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Bucks use single mode register field for normal operation
|
|
|
|
* and suspend state.
|
|
|
|
* There are 3 modes to map to: FAST, NORMAL, and STANDBY.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static unsigned da9063_buck_get_mode(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
|
|
|
|
struct regmap_field *field;
|
2019-09-26 13:51:28 +08:00
|
|
|
unsigned int val;
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = regmap_field_read(regl->mode, &val);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
switch (val) {
|
|
|
|
default:
|
|
|
|
case BUCK_MODE_MANUAL:
|
|
|
|
/* Sleep flag bit decides the mode */
|
|
|
|
break;
|
|
|
|
case BUCK_MODE_SLEEP:
|
|
|
|
return REGULATOR_MODE_STANDBY;
|
|
|
|
case BUCK_MODE_SYNC:
|
|
|
|
return REGULATOR_MODE_FAST;
|
|
|
|
case BUCK_MODE_AUTO:
|
|
|
|
return REGULATOR_MODE_NORMAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Detect current regulator state */
|
|
|
|
ret = regmap_field_read(regl->suspend, &val);
|
|
|
|
if (ret < 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Read regulator mode from proper register, depending on state */
|
|
|
|
if (val)
|
|
|
|
field = regl->suspend_sleep;
|
|
|
|
else
|
|
|
|
field = regl->sleep;
|
|
|
|
|
|
|
|
ret = regmap_field_read(field, &val);
|
|
|
|
if (ret < 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (val)
|
2019-09-26 13:51:28 +08:00
|
|
|
return REGULATOR_MODE_STANDBY;
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
else
|
2019-09-26 13:51:28 +08:00
|
|
|
return REGULATOR_MODE_FAST;
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* LDOs use sleep flags - one for normal and one for suspend state.
|
|
|
|
* There are 2 modes to map to: NORMAL and STANDBY (sleep) for each state.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int da9063_ldo_set_mode(struct regulator_dev *rdev, unsigned mode)
|
|
|
|
{
|
|
|
|
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
|
|
|
|
unsigned val;
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case REGULATOR_MODE_NORMAL:
|
|
|
|
val = 0;
|
|
|
|
break;
|
|
|
|
case REGULATOR_MODE_STANDBY:
|
|
|
|
val = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return regmap_field_write(regl->sleep, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned da9063_ldo_get_mode(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
|
|
|
|
struct regmap_field *field;
|
|
|
|
int ret, val;
|
|
|
|
|
|
|
|
/* Detect current regulator state */
|
|
|
|
ret = regmap_field_read(regl->suspend, &val);
|
|
|
|
if (ret < 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Read regulator mode from proper register, depending on state */
|
|
|
|
if (val)
|
|
|
|
field = regl->suspend_sleep;
|
|
|
|
else
|
|
|
|
field = regl->sleep;
|
|
|
|
|
|
|
|
ret = regmap_field_read(field, &val);
|
|
|
|
if (ret < 0)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
if (val)
|
|
|
|
return REGULATOR_MODE_STANDBY;
|
|
|
|
else
|
|
|
|
return REGULATOR_MODE_NORMAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int da9063_buck_get_status(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
int ret = regulator_is_enabled_regmap(rdev);
|
|
|
|
|
|
|
|
if (ret == 0) {
|
|
|
|
ret = REGULATOR_STATUS_OFF;
|
|
|
|
} else if (ret > 0) {
|
|
|
|
ret = da9063_buck_get_mode(rdev);
|
|
|
|
if (ret > 0)
|
|
|
|
ret = regulator_mode_to_status(ret);
|
|
|
|
else if (ret == 0)
|
|
|
|
ret = -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int da9063_ldo_get_status(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
int ret = regulator_is_enabled_regmap(rdev);
|
|
|
|
|
|
|
|
if (ret == 0) {
|
|
|
|
ret = REGULATOR_STATUS_OFF;
|
|
|
|
} else if (ret > 0) {
|
|
|
|
ret = da9063_ldo_get_mode(rdev);
|
|
|
|
if (ret > 0)
|
|
|
|
ret = regulator_mode_to_status(ret);
|
|
|
|
else if (ret == 0)
|
|
|
|
ret = -EIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int da9063_set_suspend_voltage(struct regulator_dev *rdev, int uV)
|
|
|
|
{
|
|
|
|
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
|
|
|
|
const struct da9063_regulator_info *rinfo = regl->info;
|
|
|
|
int ret, sel;
|
|
|
|
|
|
|
|
sel = regulator_map_voltage_linear(rdev, uV, uV);
|
|
|
|
if (sel < 0)
|
2014-02-18 18:41:05 +08:00
|
|
|
return sel;
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
|
|
|
|
sel <<= ffs(rdev->desc->vsel_mask) - 1;
|
|
|
|
|
|
|
|
ret = regmap_update_bits(regl->hw->regmap, rinfo->suspend_vsel_reg,
|
|
|
|
rdev->desc->vsel_mask, sel);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int da9063_suspend_enable(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
|
|
|
|
|
|
|
|
return regmap_field_write(regl->suspend, 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int da9063_suspend_disable(struct regulator_dev *rdev)
|
|
|
|
{
|
|
|
|
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
|
|
|
|
|
|
|
|
return regmap_field_write(regl->suspend, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int da9063_buck_set_suspend_mode(struct regulator_dev *rdev, unsigned mode)
|
|
|
|
{
|
|
|
|
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
|
|
|
|
int val;
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case REGULATOR_MODE_FAST:
|
|
|
|
val = BUCK_MODE_SYNC;
|
|
|
|
break;
|
|
|
|
case REGULATOR_MODE_NORMAL:
|
|
|
|
val = BUCK_MODE_AUTO;
|
|
|
|
break;
|
|
|
|
case REGULATOR_MODE_STANDBY:
|
|
|
|
val = BUCK_MODE_SLEEP;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return regmap_field_write(regl->mode, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int da9063_ldo_set_suspend_mode(struct regulator_dev *rdev, unsigned mode)
|
|
|
|
{
|
|
|
|
struct da9063_regulator *regl = rdev_get_drvdata(rdev);
|
|
|
|
unsigned val;
|
|
|
|
|
|
|
|
switch (mode) {
|
|
|
|
case REGULATOR_MODE_NORMAL:
|
|
|
|
val = 0;
|
|
|
|
break;
|
|
|
|
case REGULATOR_MODE_STANDBY:
|
|
|
|
val = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return regmap_field_write(regl->suspend_sleep, val);
|
|
|
|
}
|
|
|
|
|
2015-12-19 23:07:09 +08:00
|
|
|
static const struct regulator_ops da9063_buck_ops = {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
.enable = regulator_enable_regmap,
|
|
|
|
.disable = regulator_disable_regmap,
|
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
|
|
.list_voltage = regulator_list_voltage_linear,
|
2019-03-04 21:16:03 +08:00
|
|
|
.set_current_limit = regulator_set_current_limit_regmap,
|
|
|
|
.get_current_limit = regulator_get_current_limit_regmap,
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
.set_mode = da9063_buck_set_mode,
|
|
|
|
.get_mode = da9063_buck_get_mode,
|
|
|
|
.get_status = da9063_buck_get_status,
|
|
|
|
.set_suspend_voltage = da9063_set_suspend_voltage,
|
|
|
|
.set_suspend_enable = da9063_suspend_enable,
|
|
|
|
.set_suspend_disable = da9063_suspend_disable,
|
|
|
|
.set_suspend_mode = da9063_buck_set_suspend_mode,
|
|
|
|
};
|
|
|
|
|
2015-12-19 23:07:09 +08:00
|
|
|
static const struct regulator_ops da9063_ldo_ops = {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
.enable = regulator_enable_regmap,
|
|
|
|
.disable = regulator_disable_regmap,
|
|
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
|
|
.get_voltage_sel = regulator_get_voltage_sel_regmap,
|
|
|
|
.set_voltage_sel = regulator_set_voltage_sel_regmap,
|
|
|
|
.list_voltage = regulator_list_voltage_linear,
|
|
|
|
.set_mode = da9063_ldo_set_mode,
|
|
|
|
.get_mode = da9063_ldo_get_mode,
|
|
|
|
.get_status = da9063_ldo_get_status,
|
|
|
|
.set_suspend_voltage = da9063_set_suspend_voltage,
|
|
|
|
.set_suspend_enable = da9063_suspend_enable,
|
|
|
|
.set_suspend_disable = da9063_suspend_disable,
|
|
|
|
.set_suspend_mode = da9063_ldo_set_suspend_mode,
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Info of regulators for DA9063 */
|
|
|
|
static const struct da9063_regulator_info da9063_regulator_info[] = {
|
|
|
|
{
|
|
|
|
DA9063_BUCK(DA9063, BCORE1, 300, 10, 1570,
|
2019-03-04 21:16:03 +08:00
|
|
|
da9063_buck_a_limits,
|
|
|
|
DA9063_REG_BUCK_ILIM_C, DA9063_BCORE1_ILIM_MASK),
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
DA9063_BUCK_COMMON_FIELDS(BCORE1),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBCORE1_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_BUCK(DA9063, BCORE2, 300, 10, 1570,
|
2019-03-04 21:16:03 +08:00
|
|
|
da9063_buck_a_limits,
|
|
|
|
DA9063_REG_BUCK_ILIM_C, DA9063_BCORE2_ILIM_MASK),
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
DA9063_BUCK_COMMON_FIELDS(BCORE2),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBCORE2_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_BUCK(DA9063, BPRO, 530, 10, 1800,
|
2019-03-04 21:16:03 +08:00
|
|
|
da9063_buck_a_limits,
|
|
|
|
DA9063_REG_BUCK_ILIM_B, DA9063_BPRO_ILIM_MASK),
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
DA9063_BUCK_COMMON_FIELDS(BPRO),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBPRO_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_BUCK(DA9063, BMEM, 800, 20, 3340,
|
2019-03-04 21:16:03 +08:00
|
|
|
da9063_buck_b_limits,
|
|
|
|
DA9063_REG_BUCK_ILIM_A, DA9063_BMEM_ILIM_MASK),
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
DA9063_BUCK_COMMON_FIELDS(BMEM),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBMEM_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_BUCK(DA9063, BIO, 800, 20, 3340,
|
2019-03-04 21:16:03 +08:00
|
|
|
da9063_buck_b_limits,
|
|
|
|
DA9063_REG_BUCK_ILIM_A, DA9063_BIO_ILIM_MASK),
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
DA9063_BUCK_COMMON_FIELDS(BIO),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_2, DA9063_VBIO_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_BUCK(DA9063, BPERI, 800, 20, 3340,
|
2019-03-04 21:16:03 +08:00
|
|
|
da9063_buck_b_limits,
|
|
|
|
DA9063_REG_BUCK_ILIM_B, DA9063_BPERI_ILIM_MASK),
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
DA9063_BUCK_COMMON_FIELDS(BPERI),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBPERI_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_BUCK(DA9063, BCORES_MERGED, 300, 10, 1570,
|
2019-03-04 21:16:03 +08:00
|
|
|
da9063_bcores_merged_limits,
|
|
|
|
DA9063_REG_BUCK_ILIM_C, DA9063_BCORE1_ILIM_MASK),
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
/* BCORES_MERGED uses the same register fields as BCORE1 */
|
|
|
|
DA9063_BUCK_COMMON_FIELDS(BCORE1),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBCORE1_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_BUCK(DA9063, BMEM_BIO_MERGED, 800, 20, 3340,
|
2019-03-04 21:16:03 +08:00
|
|
|
da9063_bmem_bio_merged_limits,
|
|
|
|
DA9063_REG_BUCK_ILIM_A, DA9063_BMEM_ILIM_MASK),
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
/* BMEM_BIO_MERGED uses the same register fields as BMEM */
|
|
|
|
DA9063_BUCK_COMMON_FIELDS(BMEM),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VBMEM_SEL),
|
|
|
|
},
|
2018-06-11 19:58:50 +08:00
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO3, 900, 20, 3440),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VLDO3_SEL),
|
|
|
|
.oc_event = BFIELD(DA9063_REG_STATUS_D, DA9063_LDO3_LIM),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO7, 900, 50, 3600),
|
|
|
|
.suspend = BFIELD(DA9063_REG_LDO7_CONT, DA9063_VLDO7_SEL),
|
|
|
|
.oc_event = BFIELD(DA9063_REG_STATUS_D, DA9063_LDO7_LIM),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO8, 900, 50, 3600),
|
|
|
|
.suspend = BFIELD(DA9063_REG_LDO8_CONT, DA9063_VLDO8_SEL),
|
|
|
|
.oc_event = BFIELD(DA9063_REG_STATUS_D, DA9063_LDO8_LIM),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO9, 950, 50, 3600),
|
|
|
|
.suspend = BFIELD(DA9063_REG_LDO9_CONT, DA9063_VLDO9_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO11, 900, 50, 3600),
|
|
|
|
.suspend = BFIELD(DA9063_REG_LDO11_CONT, DA9063_VLDO11_SEL),
|
|
|
|
.oc_event = BFIELD(DA9063_REG_STATUS_D, DA9063_LDO11_LIM),
|
|
|
|
},
|
|
|
|
|
|
|
|
/* The following LDOs are present only on DA9063, not on DA9063L */
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO1, 600, 20, 1860),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VLDO1_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO2, 600, 20, 1860),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_1, DA9063_VLDO2_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO4, 900, 20, 3440),
|
|
|
|
.suspend = BFIELD(DA9063_REG_DVC_2, DA9063_VLDO4_SEL),
|
|
|
|
.oc_event = BFIELD(DA9063_REG_STATUS_D, DA9063_LDO4_LIM),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO5, 900, 50, 3600),
|
|
|
|
.suspend = BFIELD(DA9063_REG_LDO5_CONT, DA9063_VLDO5_SEL),
|
|
|
|
},
|
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO6, 900, 50, 3600),
|
|
|
|
.suspend = BFIELD(DA9063_REG_LDO6_CONT, DA9063_VLDO6_SEL),
|
|
|
|
},
|
2018-06-11 19:58:50 +08:00
|
|
|
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
{
|
|
|
|
DA9063_LDO(DA9063, LDO10, 900, 50, 3600),
|
|
|
|
.suspend = BFIELD(DA9063_REG_LDO10_CONT, DA9063_VLDO10_SEL),
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Link chip model with regulators info table */
|
|
|
|
static struct da9063_dev_model regulators_models[] = {
|
|
|
|
{
|
|
|
|
.regulator_info = da9063_regulator_info,
|
|
|
|
.n_regulators = ARRAY_SIZE(da9063_regulator_info),
|
2018-06-11 19:58:45 +08:00
|
|
|
.type = PMIC_TYPE_DA9063,
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
},
|
2018-06-11 19:58:50 +08:00
|
|
|
{
|
|
|
|
.regulator_info = da9063_regulator_info,
|
|
|
|
.n_regulators = ARRAY_SIZE(da9063_regulator_info) - 6,
|
|
|
|
.type = PMIC_TYPE_DA9063L,
|
|
|
|
},
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
{ }
|
|
|
|
};
|
|
|
|
|
|
|
|
/* Regulator interrupt handlers */
|
2013-09-01 12:19:51 +08:00
|
|
|
static irqreturn_t da9063_ldo_lim_event(int irq, void *data)
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
{
|
|
|
|
struct da9063_regulators *regulators = data;
|
|
|
|
struct da9063 *hw = regulators->regulator[0].hw;
|
|
|
|
struct da9063_regulator *regl;
|
|
|
|
int bits, i , ret;
|
|
|
|
|
|
|
|
ret = regmap_read(hw->regmap, DA9063_REG_STATUS_D, &bits);
|
|
|
|
if (ret < 0)
|
|
|
|
return IRQ_NONE;
|
|
|
|
|
|
|
|
for (i = regulators->n_regulators - 1; i >= 0; i--) {
|
|
|
|
regl = ®ulators->regulator[i];
|
|
|
|
if (regl->info->oc_event.reg != DA9063_REG_STATUS_D)
|
|
|
|
continue;
|
|
|
|
|
2019-02-26 23:23:02 +08:00
|
|
|
if (BIT(regl->info->oc_event.lsb) & bits) {
|
|
|
|
regulator_lock(regl->rdev);
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
regulator_notifier_call_chain(regl->rdev,
|
|
|
|
REGULATOR_EVENT_OVER_CURRENT, NULL);
|
2019-02-26 23:23:02 +08:00
|
|
|
regulator_unlock(regl->rdev);
|
|
|
|
}
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Probing and Initialisation functions
|
|
|
|
*/
|
|
|
|
static const struct regulator_init_data *da9063_get_regulator_initdata(
|
|
|
|
const struct da9063_regulators_pdata *regl_pdata, int id)
|
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < regl_pdata->n_regulators; i++) {
|
|
|
|
if (id == regl_pdata->regulator_data[i].id)
|
|
|
|
return regl_pdata->regulator_data[i].initdata;
|
|
|
|
}
|
|
|
|
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct of_regulator_match da9063_matches[] = {
|
|
|
|
[DA9063_ID_BCORE1] = { .name = "bcore1" },
|
|
|
|
[DA9063_ID_BCORE2] = { .name = "bcore2" },
|
|
|
|
[DA9063_ID_BPRO] = { .name = "bpro", },
|
|
|
|
[DA9063_ID_BMEM] = { .name = "bmem", },
|
|
|
|
[DA9063_ID_BIO] = { .name = "bio", },
|
|
|
|
[DA9063_ID_BPERI] = { .name = "bperi", },
|
|
|
|
[DA9063_ID_BCORES_MERGED] = { .name = "bcores-merged" },
|
|
|
|
[DA9063_ID_BMEM_BIO_MERGED] = { .name = "bmem-bio-merged", },
|
2018-06-11 19:58:50 +08:00
|
|
|
[DA9063_ID_LDO3] = { .name = "ldo3", },
|
|
|
|
[DA9063_ID_LDO7] = { .name = "ldo7", },
|
|
|
|
[DA9063_ID_LDO8] = { .name = "ldo8", },
|
|
|
|
[DA9063_ID_LDO9] = { .name = "ldo9", },
|
|
|
|
[DA9063_ID_LDO11] = { .name = "ldo11", },
|
|
|
|
/* The following LDOs are present only on DA9063, not on DA9063L */
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
[DA9063_ID_LDO1] = { .name = "ldo1", },
|
|
|
|
[DA9063_ID_LDO2] = { .name = "ldo2", },
|
|
|
|
[DA9063_ID_LDO4] = { .name = "ldo4", },
|
|
|
|
[DA9063_ID_LDO5] = { .name = "ldo5", },
|
|
|
|
[DA9063_ID_LDO6] = { .name = "ldo6", },
|
|
|
|
[DA9063_ID_LDO10] = { .name = "ldo10", },
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct da9063_regulators_pdata *da9063_parse_regulators_dt(
|
|
|
|
struct platform_device *pdev,
|
|
|
|
struct of_regulator_match **da9063_reg_matches)
|
|
|
|
{
|
2018-06-11 19:58:50 +08:00
|
|
|
struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
struct da9063_regulators_pdata *pdata;
|
|
|
|
struct da9063_regulator_data *rdata;
|
|
|
|
struct device_node *node;
|
2018-06-11 19:58:50 +08:00
|
|
|
int da9063_matches_len = ARRAY_SIZE(da9063_matches);
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
int i, n, num;
|
|
|
|
|
2018-06-11 19:58:50 +08:00
|
|
|
if (da9063->type == PMIC_TYPE_DA9063L)
|
|
|
|
da9063_matches_len -= 6;
|
|
|
|
|
2014-02-14 19:49:58 +08:00
|
|
|
node = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
if (!node) {
|
|
|
|
dev_err(&pdev->dev, "Regulators device node not found\n");
|
|
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
}
|
|
|
|
|
|
|
|
num = of_regulator_match(&pdev->dev, node, da9063_matches,
|
2018-06-11 19:58:50 +08:00
|
|
|
da9063_matches_len);
|
2014-02-17 17:03:31 +08:00
|
|
|
of_node_put(node);
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
if (num < 0) {
|
|
|
|
dev_err(&pdev->dev, "Failed to match regulators\n");
|
|
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
}
|
|
|
|
|
|
|
|
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
|
|
|
|
if (!pdata)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
treewide: devm_kzalloc() -> devm_kcalloc()
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
This patch replaces cases of:
devm_kzalloc(handle, a * b, gfp)
with:
devm_kcalloc(handle, a * b, gfp)
as well as handling cases of:
devm_kzalloc(handle, a * b * c, gfp)
with:
devm_kzalloc(handle, array3_size(a, b, c), gfp)
as it's slightly less ugly than:
devm_kcalloc(handle, array_size(a, b), c, gfp)
This does, however, attempt to ignore constant size factors like:
devm_kzalloc(handle, 4 * 1024, gfp)
though any constants defined via macros get caught up in the conversion.
Any factors with a sizeof() of "unsigned char", "char", and "u8" were
dropped, since they're redundant.
Some manual whitespace fixes were needed in this patch, as Coccinelle
really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".
The Coccinelle script used for this was:
// Fix redundant parens around sizeof().
@@
expression HANDLE;
type TYPE;
expression THING, E;
@@
(
devm_kzalloc(HANDLE,
- (sizeof(TYPE)) * E
+ sizeof(TYPE) * E
, ...)
|
devm_kzalloc(HANDLE,
- (sizeof(THING)) * E
+ sizeof(THING) * E
, ...)
)
// Drop single-byte sizes and redundant parens.
@@
expression HANDLE;
expression COUNT;
typedef u8;
typedef __u8;
@@
(
devm_kzalloc(HANDLE,
- sizeof(u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * (COUNT)
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(__u8) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(char) * COUNT
+ COUNT
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(unsigned char) * COUNT
+ COUNT
, ...)
)
// 2-factor product with sizeof(type/expression) and identifier or constant.
@@
expression HANDLE;
type TYPE;
expression THING;
identifier COUNT_ID;
constant COUNT_CONST;
@@
(
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_ID)
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_ID
+ COUNT_ID, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (COUNT_CONST)
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * COUNT_CONST
+ COUNT_CONST, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_ID)
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_ID
+ COUNT_ID, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (COUNT_CONST)
+ COUNT_CONST, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * COUNT_CONST
+ COUNT_CONST, sizeof(THING)
, ...)
)
// 2-factor product, only identifiers.
@@
expression HANDLE;
identifier SIZE, COUNT;
@@
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- SIZE * COUNT
+ COUNT, SIZE
, ...)
// 3-factor product with 1 sizeof(type) or sizeof(expression), with
// redundant parens removed.
@@
expression HANDLE;
expression THING;
identifier STRIDE, COUNT;
type TYPE;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(TYPE))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * (COUNT) * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * (STRIDE)
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING) * COUNT * STRIDE
+ array3_size(COUNT, STRIDE, sizeof(THING))
, ...)
)
// 3-factor product with 2 sizeof(variable), with redundant parens removed.
@@
expression HANDLE;
expression THING1, THING2;
identifier COUNT;
type TYPE1, TYPE2;
@@
(
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(TYPE2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(THING1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(THING1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * COUNT
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
|
devm_kzalloc(HANDLE,
- sizeof(TYPE1) * sizeof(THING2) * (COUNT)
+ array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
, ...)
)
// 3-factor product, only identifiers, with redundant parens removed.
@@
expression HANDLE;
identifier STRIDE, SIZE, COUNT;
@@
(
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * STRIDE * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- (COUNT) * (STRIDE) * (SIZE)
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
|
devm_kzalloc(HANDLE,
- COUNT * STRIDE * SIZE
+ array3_size(COUNT, STRIDE, SIZE)
, ...)
)
// Any remaining multi-factor products, first at least 3-factor products,
// when they're not all constants...
@@
expression HANDLE;
expression E1, E2, E3;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE,
- (E1) * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * E3
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- (E1) * (E2) * (E3)
+ array3_size(E1, E2, E3)
, ...)
|
devm_kzalloc(HANDLE,
- E1 * E2 * E3
+ array3_size(E1, E2, E3)
, ...)
)
// And then all remaining 2 factors products when they're not all constants,
// keeping sizeof() as the second factor argument.
@@
expression HANDLE;
expression THING, E1, E2;
type TYPE;
constant C1, C2, C3;
@@
(
devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
|
devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
|
devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
|
devm_kzalloc(HANDLE, C1 * C2, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * (E2)
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(TYPE) * E2
+ E2, sizeof(TYPE)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * (E2)
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- sizeof(THING) * E2
+ E2, sizeof(THING)
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * E2
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- (E1) * (E2)
+ E1, E2
, ...)
|
- devm_kzalloc
+ devm_kcalloc
(HANDLE,
- E1 * E2
+ E1, E2
, ...)
)
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:07:58 +08:00
|
|
|
pdata->regulator_data = devm_kcalloc(&pdev->dev,
|
|
|
|
num, sizeof(*pdata->regulator_data),
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
GFP_KERNEL);
|
|
|
|
if (!pdata->regulator_data)
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pdata->n_regulators = num;
|
|
|
|
|
|
|
|
n = 0;
|
2018-06-11 19:58:50 +08:00
|
|
|
for (i = 0; i < da9063_matches_len; i++) {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
if (!da9063_matches[i].init_data)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
rdata = &pdata->regulator_data[n];
|
|
|
|
rdata->id = i;
|
|
|
|
rdata->initdata = da9063_matches[i].init_data;
|
|
|
|
|
|
|
|
n++;
|
2015-09-11 10:26:57 +08:00
|
|
|
}
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
|
|
|
|
*da9063_reg_matches = da9063_matches;
|
|
|
|
return pdata;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int da9063_regulator_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
|
2013-09-09 19:49:27 +08:00
|
|
|
struct of_regulator_match *da9063_reg_matches = NULL;
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
struct da9063_regulators_pdata *regl_pdata;
|
|
|
|
const struct da9063_dev_model *model;
|
|
|
|
struct da9063_regulators *regulators;
|
|
|
|
struct da9063_regulator *regl;
|
|
|
|
struct regulator_config config;
|
|
|
|
bool bcores_merged, bmem_bio_merged;
|
|
|
|
int id, irq, n, n_regulators, ret, val;
|
|
|
|
|
2019-05-20 17:34:44 +08:00
|
|
|
regl_pdata = da9063_parse_regulators_dt(pdev, &da9063_reg_matches);
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
|
|
|
|
if (IS_ERR(regl_pdata) || regl_pdata->n_regulators == 0) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"No regulators defined for the platform\n");
|
2017-08-30 22:03:58 +08:00
|
|
|
return -ENODEV;
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Find regulators set for particular device model */
|
|
|
|
for (model = regulators_models; model->regulator_info; model++) {
|
2018-06-11 19:58:45 +08:00
|
|
|
if (model->type == da9063->type)
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (!model->regulator_info) {
|
|
|
|
dev_err(&pdev->dev, "Chip model not recognised (%u)\n",
|
2018-06-11 19:58:45 +08:00
|
|
|
da9063->type);
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = regmap_read(da9063->regmap, DA9063_REG_CONFIG_H, &val);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"Error while reading BUCKs configuration\n");
|
2014-02-18 18:41:05 +08:00
|
|
|
return ret;
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
}
|
|
|
|
bcores_merged = val & DA9063_BCORE_MERGE;
|
|
|
|
bmem_bio_merged = val & DA9063_BUCK_MERGE;
|
|
|
|
|
|
|
|
n_regulators = model->n_regulators;
|
|
|
|
if (bcores_merged)
|
|
|
|
n_regulators -= 2; /* remove BCORE1, BCORE2 */
|
|
|
|
else
|
|
|
|
n_regulators--; /* remove BCORES_MERGED */
|
|
|
|
if (bmem_bio_merged)
|
|
|
|
n_regulators -= 2; /* remove BMEM, BIO */
|
|
|
|
else
|
|
|
|
n_regulators--; /* remove BMEM_BIO_MERGED */
|
|
|
|
|
|
|
|
/* Allocate memory required by usable regulators */
|
2019-02-22 01:57:14 +08:00
|
|
|
regulators = devm_kzalloc(&pdev->dev, struct_size(regulators,
|
|
|
|
regulator, n_regulators), GFP_KERNEL);
|
2014-02-20 16:53:01 +08:00
|
|
|
if (!regulators)
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
regulators->n_regulators = n_regulators;
|
|
|
|
platform_set_drvdata(pdev, regulators);
|
|
|
|
|
|
|
|
/* Register all regulators declared in platform information */
|
|
|
|
n = 0;
|
|
|
|
id = 0;
|
|
|
|
while (n < regulators->n_regulators) {
|
|
|
|
/* Skip regulator IDs depending on merge mode configuration */
|
|
|
|
switch (id) {
|
|
|
|
case DA9063_ID_BCORE1:
|
|
|
|
case DA9063_ID_BCORE2:
|
|
|
|
if (bcores_merged) {
|
|
|
|
id++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case DA9063_ID_BMEM:
|
|
|
|
case DA9063_ID_BIO:
|
|
|
|
if (bmem_bio_merged) {
|
|
|
|
id++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case DA9063_ID_BCORES_MERGED:
|
|
|
|
if (!bcores_merged) {
|
|
|
|
id++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case DA9063_ID_BMEM_BIO_MERGED:
|
|
|
|
if (!bmem_bio_merged) {
|
|
|
|
id++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Initialise regulator structure */
|
|
|
|
regl = ®ulators->regulator[n];
|
|
|
|
regl->hw = da9063;
|
|
|
|
regl->info = &model->regulator_info[id];
|
|
|
|
regl->desc = regl->info->desc;
|
|
|
|
regl->desc.type = REGULATOR_VOLTAGE;
|
|
|
|
regl->desc.owner = THIS_MODULE;
|
|
|
|
|
2019-01-26 23:22:34 +08:00
|
|
|
if (regl->info->mode.reg) {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
regl->mode = devm_regmap_field_alloc(&pdev->dev,
|
|
|
|
da9063->regmap, regl->info->mode);
|
2019-01-26 23:22:34 +08:00
|
|
|
if (IS_ERR(regl->mode))
|
|
|
|
return PTR_ERR(regl->mode);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (regl->info->suspend.reg) {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
regl->suspend = devm_regmap_field_alloc(&pdev->dev,
|
|
|
|
da9063->regmap, regl->info->suspend);
|
2019-01-26 23:22:34 +08:00
|
|
|
if (IS_ERR(regl->suspend))
|
|
|
|
return PTR_ERR(regl->suspend);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (regl->info->sleep.reg) {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
regl->sleep = devm_regmap_field_alloc(&pdev->dev,
|
|
|
|
da9063->regmap, regl->info->sleep);
|
2019-01-26 23:22:34 +08:00
|
|
|
if (IS_ERR(regl->sleep))
|
|
|
|
return PTR_ERR(regl->sleep);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (regl->info->suspend_sleep.reg) {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
regl->suspend_sleep = devm_regmap_field_alloc(&pdev->dev,
|
|
|
|
da9063->regmap, regl->info->suspend_sleep);
|
2019-01-26 23:22:34 +08:00
|
|
|
if (IS_ERR(regl->suspend_sleep))
|
|
|
|
return PTR_ERR(regl->suspend_sleep);
|
|
|
|
}
|
|
|
|
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
/* Register regulator */
|
|
|
|
memset(&config, 0, sizeof(config));
|
|
|
|
config.dev = &pdev->dev;
|
|
|
|
config.init_data = da9063_get_regulator_initdata(regl_pdata, id);
|
|
|
|
config.driver_data = regl;
|
|
|
|
if (da9063_reg_matches)
|
|
|
|
config.of_node = da9063_reg_matches[id].of_node;
|
|
|
|
config.regmap = da9063->regmap;
|
2013-09-30 08:53:09 +08:00
|
|
|
regl->rdev = devm_regulator_register(&pdev->dev, ®l->desc,
|
|
|
|
&config);
|
2013-08-30 20:08:42 +08:00
|
|
|
if (IS_ERR(regl->rdev)) {
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
dev_err(&pdev->dev,
|
|
|
|
"Failed to register %s regulator\n",
|
|
|
|
regl->desc.name);
|
2013-09-30 08:53:09 +08:00
|
|
|
return PTR_ERR(regl->rdev);
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
}
|
|
|
|
id++;
|
|
|
|
n++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* LDOs overcurrent event support */
|
|
|
|
irq = platform_get_irq_byname(pdev, "LDO_LIM");
|
2019-07-31 02:15:37 +08:00
|
|
|
if (irq < 0)
|
2013-09-30 08:53:09 +08:00
|
|
|
return irq;
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
|
2015-05-31 12:27:38 +08:00
|
|
|
ret = devm_request_threaded_irq(&pdev->dev, irq,
|
2014-11-21 23:29:08 +08:00
|
|
|
NULL, da9063_ldo_lim_event,
|
|
|
|
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
|
|
|
|
"LDO_LIM", regulators);
|
|
|
|
if (ret) {
|
2015-05-31 12:27:38 +08:00
|
|
|
dev_err(&pdev->dev, "Failed to request LDO_LIM IRQ.\n");
|
|
|
|
return ret;
|
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-30 01:00:45 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver da9063_regulator_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = DA9063_DRVNAME_REGULATORS,
|
|
|
|
},
|
|
|
|
.probe = da9063_regulator_probe,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init da9063_regulator_init(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&da9063_regulator_driver);
|
|
|
|
}
|
|
|
|
subsys_initcall(da9063_regulator_init);
|
|
|
|
|
|
|
|
static void __exit da9063_regulator_cleanup(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&da9063_regulator_driver);
|
|
|
|
}
|
|
|
|
module_exit(da9063_regulator_cleanup);
|
|
|
|
|
|
|
|
|
|
|
|
/* Module information */
|
|
|
|
MODULE_AUTHOR("Krystian Garbaciak <krystian.garbaciak@diasemi.com>");
|
|
|
|
MODULE_DESCRIPTION("DA9063 regulators driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
2016-05-11 02:57:57 +08:00
|
|
|
MODULE_ALIAS("platform:" DA9063_DRVNAME_REGULATORS);
|