OpenCloudOS-Kernel/drivers/media/pci/dt3155/dt3155.c

607 lines
17 KiB
C
Raw Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 Based on 3 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version [author] [graeme] [gregory] [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i] [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema] [hk] [hemahk]@[ti] [com] this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1105 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-27 14:55:06 +08:00
// SPDX-License-Identifier: GPL-2.0-or-later
/***************************************************************************
* Copyright (C) 2006-2010 by Marin Mitov *
* mitov@issp.bas.bg *
* *
* *
***************************************************************************/
#include <linux/module.h>
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
#include <linux/stringify.h>
#include <linux/delay.h>
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
#include <linux/kthread.h>
#include <linux/slab.h>
#include <media/v4l2-dev.h>
#include <media/v4l2-ioctl.h>
#include <media/v4l2-common.h>
#include <media/videobuf2-dma-contig.h>
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
#include "dt3155.h"
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
#define DT3155_DEVICE_ID 0x1223
/**
* read_i2c_reg - reads an internal i2c register
*
* @addr: dt3155 mmio base address
* @index: index (internal address) of register to read
* @data: pointer to byte the read data will be placed in
*
* returns: zero on success or error code
*
* This function starts reading the specified (by index) register
* and busy waits for the process to finish. The result is placed
* in a byte pointed by data.
*/
static int read_i2c_reg(void __iomem *addr, u8 index, u8 *data)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
u32 tmp = index;
iowrite32((tmp << 17) | IIC_READ, addr + IIC_CSR2);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
udelay(45); /* wait at least 43 usec for NEW_CYCLE to clear */
if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
return -EIO; /* error: NEW_CYCLE not cleared */
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
tmp = ioread32(addr + IIC_CSR1);
if (tmp & DIRECT_ABORT) {
/* reset DIRECT_ABORT bit */
iowrite32(DIRECT_ABORT, addr + IIC_CSR1);
return -EIO; /* error: DIRECT_ABORT set */
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
}
*data = tmp >> 24;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0;
}
/**
* write_i2c_reg - writes to an internal i2c register
*
* @addr: dt3155 mmio base address
* @index: index (internal address) of register to read
* @data: data to be written
*
* returns: zero on success or error code
*
* This function starts writing the specified (by index) register
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
* and busy waits for the process to finish.
*/
static int write_i2c_reg(void __iomem *addr, u8 index, u8 data)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
u32 tmp = index;
iowrite32((tmp << 17) | IIC_WRITE | data, addr + IIC_CSR2);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
udelay(65); /* wait at least 63 usec for NEW_CYCLE to clear */
if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
return -EIO; /* error: NEW_CYCLE not cleared */
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
if (ioread32(addr + IIC_CSR1) & DIRECT_ABORT) {
/* reset DIRECT_ABORT bit */
iowrite32(DIRECT_ABORT, addr + IIC_CSR1);
return -EIO; /* error: DIRECT_ABORT set */
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
}
return 0;
}
/**
* write_i2c_reg_nowait - writes to an internal i2c register
*
* @addr: dt3155 mmio base address
* @index: index (internal address) of register to read
* @data: data to be written
*
* This function starts writing the specified (by index) register
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
* and then returns.
*/
static void write_i2c_reg_nowait(void __iomem *addr, u8 index, u8 data)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
u32 tmp = index;
iowrite32((tmp << 17) | IIC_WRITE | data, addr + IIC_CSR2);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
}
/**
* wait_i2c_reg - waits the read/write to finish
*
* @addr: dt3155 mmio base address
*
* returns: zero on success or error code
*
* This function waits reading/writing to finish.
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
*/
static int wait_i2c_reg(void __iomem *addr)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
udelay(65); /* wait at least 63 usec for NEW_CYCLE to clear */
if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
return -EIO; /* error: NEW_CYCLE not cleared */
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
if (ioread32(addr + IIC_CSR1) & DIRECT_ABORT) {
/* reset DIRECT_ABORT bit */
iowrite32(DIRECT_ABORT, addr + IIC_CSR1);
return -EIO; /* error: DIRECT_ABORT set */
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
}
return 0;
}
static int
dt3155_queue_setup(struct vb2_queue *vq,
unsigned int *nbuffers, unsigned int *num_planes,
unsigned int sizes[], struct device *alloc_devs[])
{
struct dt3155_priv *pd = vb2_get_drv_priv(vq);
unsigned size = pd->width * pd->height;
if (vq->num_buffers + *nbuffers < 2)
*nbuffers = 2 - vq->num_buffers;
if (*num_planes)
return sizes[0] < size ? -EINVAL : 0;
*num_planes = 1;
sizes[0] = size;
return 0;
}
static int dt3155_buf_prepare(struct vb2_buffer *vb)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct dt3155_priv *pd = vb2_get_drv_priv(vb->vb2_queue);
vb2_set_plane_payload(vb, 0, pd->width * pd->height);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0;
}
static int dt3155_start_streaming(struct vb2_queue *q, unsigned count)
{
struct dt3155_priv *pd = vb2_get_drv_priv(q);
struct vb2_buffer *vb = &pd->curr_buf->vb2_buf;
dma_addr_t dma_addr;
pd->sequence = 0;
dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
iowrite32(dma_addr, pd->regs + EVEN_DMA_START);
iowrite32(dma_addr + pd->width, pd->regs + ODD_DMA_START);
iowrite32(pd->width, pd->regs + EVEN_DMA_STRIDE);
iowrite32(pd->width, pd->regs + ODD_DMA_STRIDE);
/* enable interrupts, clear all irq flags */
iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START |
FLD_END_EVEN | FLD_END_ODD, pd->regs + INT_CSR);
iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN |
FLD_DN_ODD | FLD_DN_EVEN | CAP_CONT_EVEN | CAP_CONT_ODD,
pd->regs + CSR1);
wait_i2c_reg(pd->regs);
write_i2c_reg(pd->regs, CONFIG, pd->config);
write_i2c_reg(pd->regs, EVEN_CSR, CSR_ERROR | CSR_DONE);
write_i2c_reg(pd->regs, ODD_CSR, CSR_ERROR | CSR_DONE);
/* start the board */
write_i2c_reg(pd->regs, CSR2, pd->csr2 | BUSY_EVEN | BUSY_ODD);
return 0;
}
static void dt3155_stop_streaming(struct vb2_queue *q)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct dt3155_priv *pd = vb2_get_drv_priv(q);
struct vb2_buffer *vb;
spin_lock_irq(&pd->lock);
/* stop the board */
write_i2c_reg_nowait(pd->regs, CSR2, pd->csr2);
iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN |
FLD_DN_ODD | FLD_DN_EVEN, pd->regs + CSR1);
/* disable interrupts, clear all irq flags */
iowrite32(FLD_START | FLD_END_EVEN | FLD_END_ODD, pd->regs + INT_CSR);
spin_unlock_irq(&pd->lock);
/*
* It is not clear whether the DMA stops at once or whether it
* will finish the current frame or field first. To be on the
* safe side we wait a bit.
*/
msleep(45);
spin_lock_irq(&pd->lock);
if (pd->curr_buf) {
vb2_buffer_done(&pd->curr_buf->vb2_buf, VB2_BUF_STATE_ERROR);
pd->curr_buf = NULL;
}
while (!list_empty(&pd->dmaq)) {
vb = list_first_entry(&pd->dmaq, typeof(*vb), done_entry);
list_del(&vb->done_entry);
vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
}
spin_unlock_irq(&pd->lock);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
}
static void dt3155_buf_queue(struct vb2_buffer *vb)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
struct dt3155_priv *pd = vb2_get_drv_priv(vb->vb2_queue);
/* pd->vidq.streaming = 1 when dt3155_buf_queue() is invoked */
spin_lock_irq(&pd->lock);
if (pd->curr_buf)
list_add_tail(&vb->done_entry, &pd->dmaq);
else
pd->curr_buf = vbuf;
spin_unlock_irq(&pd->lock);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
}
static const struct vb2_ops q_ops = {
.queue_setup = dt3155_queue_setup,
.wait_prepare = vb2_ops_wait_prepare,
.wait_finish = vb2_ops_wait_finish,
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
.buf_prepare = dt3155_buf_prepare,
.start_streaming = dt3155_start_streaming,
.stop_streaming = dt3155_stop_streaming,
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
.buf_queue = dt3155_buf_queue,
};
static irqreturn_t dt3155_irq_handler_even(int irq, void *dev_id)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct dt3155_priv *ipd = dev_id;
struct vb2_buffer *ivb;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
dma_addr_t dma_addr;
u32 tmp;
tmp = ioread32(ipd->regs + INT_CSR) & (FLD_START | FLD_END_ODD);
if (!tmp)
return IRQ_NONE; /* not our irq */
if ((tmp & FLD_START) && !(tmp & FLD_END_ODD)) {
iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START,
ipd->regs + INT_CSR);
return IRQ_HANDLED; /* start of field irq */
}
tmp = ioread32(ipd->regs + CSR1) & (FLD_CRPT_EVEN | FLD_CRPT_ODD);
if (tmp) {
iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN |
FLD_DN_ODD | FLD_DN_EVEN |
CAP_CONT_EVEN | CAP_CONT_ODD,
ipd->regs + CSR1);
}
spin_lock(&ipd->lock);
if (ipd->curr_buf && !list_empty(&ipd->dmaq)) {
ipd->curr_buf->vb2_buf.timestamp = ktime_get_ns();
ipd->curr_buf->sequence = ipd->sequence++;
ipd->curr_buf->field = V4L2_FIELD_NONE;
vb2_buffer_done(&ipd->curr_buf->vb2_buf, VB2_BUF_STATE_DONE);
ivb = list_first_entry(&ipd->dmaq, typeof(*ivb), done_entry);
list_del(&ivb->done_entry);
ipd->curr_buf = to_vb2_v4l2_buffer(ivb);
dma_addr = vb2_dma_contig_plane_dma_addr(ivb, 0);
iowrite32(dma_addr, ipd->regs + EVEN_DMA_START);
iowrite32(dma_addr + ipd->width, ipd->regs + ODD_DMA_START);
iowrite32(ipd->width, ipd->regs + EVEN_DMA_STRIDE);
iowrite32(ipd->width, ipd->regs + ODD_DMA_STRIDE);
}
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
/* enable interrupts, clear all irq flags */
iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START |
FLD_END_EVEN | FLD_END_ODD, ipd->regs + INT_CSR);
spin_unlock(&ipd->lock);
return IRQ_HANDLED;
}
static const struct v4l2_file_operations dt3155_fops = {
.owner = THIS_MODULE,
.open = v4l2_fh_open,
.release = vb2_fop_release,
.unlocked_ioctl = video_ioctl2,
.read = vb2_fop_read,
.mmap = vb2_fop_mmap,
.poll = vb2_fop_poll
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
};
static int dt3155_querycap(struct file *filp, void *p,
struct v4l2_capability *cap)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct dt3155_priv *pd = video_drvdata(filp);
strscpy(cap->driver, DT3155_NAME, sizeof(cap->driver));
strscpy(cap->card, DT3155_NAME " frame grabber", sizeof(cap->card));
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
sprintf(cap->bus_info, "PCI:%s", pci_name(pd->pdev));
return 0;
}
static int dt3155_enum_fmt_vid_cap(struct file *filp,
void *p, struct v4l2_fmtdesc *f)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
if (f->index)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return -EINVAL;
f->pixelformat = V4L2_PIX_FMT_GREY;
strscpy(f->description, "8-bit Greyscale", sizeof(f->description));
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0;
}
static int dt3155_fmt_vid_cap(struct file *filp, void *p, struct v4l2_format *f)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct dt3155_priv *pd = video_drvdata(filp);
f->fmt.pix.width = pd->width;
f->fmt.pix.height = pd->height;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
f->fmt.pix.pixelformat = V4L2_PIX_FMT_GREY;
f->fmt.pix.field = V4L2_FIELD_NONE;
f->fmt.pix.bytesperline = f->fmt.pix.width;
f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height;
f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0;
}
static int dt3155_g_std(struct file *filp, void *p, v4l2_std_id *norm)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct dt3155_priv *pd = video_drvdata(filp);
*norm = pd->std;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0;
}
static int dt3155_s_std(struct file *filp, void *p, v4l2_std_id norm)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct dt3155_priv *pd = video_drvdata(filp);
if (pd->std == norm)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0;
if (vb2_is_busy(&pd->vidq))
return -EBUSY;
pd->std = norm;
if (pd->std & V4L2_STD_525_60) {
pd->csr2 = VT_60HZ;
pd->width = 640;
pd->height = 480;
} else {
pd->csr2 = VT_50HZ;
pd->width = 768;
pd->height = 576;
}
return 0;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
}
static int dt3155_enum_input(struct file *filp, void *p,
struct v4l2_input *input)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
if (input->index > 3)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return -EINVAL;
if (input->index)
snprintf(input->name, sizeof(input->name), "VID%d",
input->index);
else
strscpy(input->name, "J2/VID0", sizeof(input->name));
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
input->type = V4L2_INPUT_TYPE_CAMERA;
input->std = V4L2_STD_ALL;
input->status = 0;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0;
}
static int dt3155_g_input(struct file *filp, void *p, unsigned int *i)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct dt3155_priv *pd = video_drvdata(filp);
*i = pd->input;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0;
}
static int dt3155_s_input(struct file *filp, void *p, unsigned int i)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct dt3155_priv *pd = video_drvdata(filp);
if (i > 3)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return -EINVAL;
pd->input = i;
write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG);
write_i2c_reg(pd->regs, AD_CMD, (i << 6) | (i << 4) | SYNC_LVL_3);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0;
}
static const struct v4l2_ioctl_ops dt3155_ioctl_ops = {
.vidioc_querycap = dt3155_querycap,
.vidioc_enum_fmt_vid_cap = dt3155_enum_fmt_vid_cap,
.vidioc_try_fmt_vid_cap = dt3155_fmt_vid_cap,
.vidioc_g_fmt_vid_cap = dt3155_fmt_vid_cap,
.vidioc_s_fmt_vid_cap = dt3155_fmt_vid_cap,
.vidioc_reqbufs = vb2_ioctl_reqbufs,
.vidioc_create_bufs = vb2_ioctl_create_bufs,
.vidioc_querybuf = vb2_ioctl_querybuf,
.vidioc_expbuf = vb2_ioctl_expbuf,
.vidioc_qbuf = vb2_ioctl_qbuf,
.vidioc_dqbuf = vb2_ioctl_dqbuf,
.vidioc_streamon = vb2_ioctl_streamon,
.vidioc_streamoff = vb2_ioctl_streamoff,
.vidioc_g_std = dt3155_g_std,
.vidioc_s_std = dt3155_s_std,
.vidioc_enum_input = dt3155_enum_input,
.vidioc_g_input = dt3155_g_input,
.vidioc_s_input = dt3155_s_input,
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
};
static int dt3155_init_board(struct dt3155_priv *pd)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct pci_dev *pdev = pd->pdev;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
int i;
u8 tmp = 0;
pci_set_master(pdev); /* dt3155 needs it */
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
/* resetting the adapter */
iowrite32(ADDR_ERR_ODD | ADDR_ERR_EVEN | FLD_CRPT_ODD | FLD_CRPT_EVEN |
FLD_DN_ODD | FLD_DN_EVEN, pd->regs + CSR1);
msleep(20);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
/* initializing adapter registers */
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
iowrite32(FIFO_EN | SRST, pd->regs + CSR1);
iowrite32(0xEEEEEE01, pd->regs + EVEN_PIXEL_FMT);
iowrite32(0xEEEEEE01, pd->regs + ODD_PIXEL_FMT);
iowrite32(0x00000020, pd->regs + FIFO_TRIGER);
iowrite32(0x00000103, pd->regs + XFER_MODE);
iowrite32(0, pd->regs + RETRY_WAIT_CNT);
iowrite32(0, pd->regs + INT_CSR);
iowrite32(1, pd->regs + EVEN_FLD_MASK);
iowrite32(1, pd->regs + ODD_FLD_MASK);
iowrite32(0, pd->regs + MASK_LENGTH);
iowrite32(0x0005007C, pd->regs + FIFO_FLAG_CNT);
iowrite32(0x01010101, pd->regs + IIC_CLK_DUR);
/* verifying that we have a DT3155 board (not just a SAA7116 chip) */
read_i2c_reg(pd->regs, DT_ID, &tmp);
if (tmp != DT3155_ID)
return -ENODEV;
/* initialize AD LUT */
write_i2c_reg(pd->regs, AD_ADDR, 0);
for (i = 0; i < 256; i++)
write_i2c_reg(pd->regs, AD_LUT, i);
/* initialize ADC references */
/* FIXME: pos_ref & neg_ref depend on VT_50HZ */
write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG);
write_i2c_reg(pd->regs, AD_CMD, VIDEO_CNL_1 | SYNC_CNL_1 | SYNC_LVL_3);
write_i2c_reg(pd->regs, AD_ADDR, AD_POS_REF);
write_i2c_reg(pd->regs, AD_CMD, 34);
write_i2c_reg(pd->regs, AD_ADDR, AD_NEG_REF);
write_i2c_reg(pd->regs, AD_CMD, 0);
/* initialize PM LUT */
write_i2c_reg(pd->regs, CONFIG, pd->config | PM_LUT_PGM);
for (i = 0; i < 256; i++) {
write_i2c_reg(pd->regs, PM_LUT_ADDR, i);
write_i2c_reg(pd->regs, PM_LUT_DATA, i);
}
write_i2c_reg(pd->regs, CONFIG, pd->config | PM_LUT_PGM | PM_LUT_SEL);
for (i = 0; i < 256; i++) {
write_i2c_reg(pd->regs, PM_LUT_ADDR, i);
write_i2c_reg(pd->regs, PM_LUT_DATA, i);
}
write_i2c_reg(pd->regs, CONFIG, pd->config); /* ACQ_MODE_EVEN */
/* select channel 1 for input and set sync level */
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG);
write_i2c_reg(pd->regs, AD_CMD, VIDEO_CNL_1 | SYNC_CNL_1 | SYNC_LVL_3);
/* disable all irqs, clear all irq flags */
iowrite32(FLD_START | FLD_END_EVEN | FLD_END_ODD,
pd->regs + INT_CSR);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0;
}
static const struct video_device dt3155_vdev = {
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
.name = DT3155_NAME,
.fops = &dt3155_fops,
.ioctl_ops = &dt3155_ioctl_ops,
.minor = -1,
.release = video_device_release_empty,
.tvnorms = V4L2_STD_ALL,
.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
V4L2_CAP_READWRITE,
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
};
static int dt3155_probe(struct pci_dev *pdev, const struct pci_device_id *id)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
int err;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
struct dt3155_priv *pd;
err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (err)
return -ENODEV;
pd = devm_kzalloc(&pdev->dev, sizeof(*pd), GFP_KERNEL);
if (!pd)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return -ENOMEM;
err = v4l2_device_register(&pdev->dev, &pd->v4l2_dev);
if (err)
return err;
pd->vdev = dt3155_vdev;
pd->vdev.v4l2_dev = &pd->v4l2_dev;
video_set_drvdata(&pd->vdev, pd); /* for use in video_fops */
pd->pdev = pdev;
pd->std = V4L2_STD_625_50;
pd->csr2 = VT_50HZ;
pd->width = 768;
pd->height = 576;
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
INIT_LIST_HEAD(&pd->dmaq);
mutex_init(&pd->mux);
pd->vdev.lock = &pd->mux; /* for locking v4l2_file_operations */
pd->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
pd->vidq.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
pd->vidq.io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
pd->vidq.ops = &q_ops;
pd->vidq.mem_ops = &vb2_dma_contig_memops;
pd->vidq.drv_priv = pd;
pd->vidq.min_buffers_needed = 2;
pd->vidq.gfp_flags = GFP_DMA32;
pd->vidq.lock = &pd->mux; /* for locking v4l2_file_operations */
pd->vidq.dev = &pdev->dev;
pd->vdev.queue = &pd->vidq;
err = vb2_queue_init(&pd->vidq);
if (err < 0)
goto err_v4l2_dev_unreg;
spin_lock_init(&pd->lock);
pd->config = ACQ_MODE_EVEN;
err = pci_enable_device(pdev);
if (err)
goto err_v4l2_dev_unreg;
err = pci_request_region(pdev, 0, pci_name(pdev));
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
if (err)
goto err_pci_disable;
pd->regs = pci_iomap(pdev, 0, pci_resource_len(pd->pdev, 0));
if (!pd->regs) {
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
err = -ENOMEM;
goto err_free_reg;
}
err = dt3155_init_board(pd);
if (err)
goto err_iounmap;
err = request_irq(pd->pdev->irq, dt3155_irq_handler_even,
IRQF_SHARED, DT3155_NAME, pd);
if (err)
goto err_iounmap;
err = video_register_device(&pd->vdev, VFL_TYPE_GRABBER, -1);
if (err)
goto err_free_irq;
dev_info(&pdev->dev, "/dev/video%i is ready\n", pd->vdev.minor);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return 0; /* success */
err_free_irq:
free_irq(pd->pdev->irq, pd);
err_iounmap:
pci_iounmap(pdev, pd->regs);
err_free_reg:
pci_release_region(pdev, 0);
err_pci_disable:
pci_disable_device(pdev);
err_v4l2_dev_unreg:
v4l2_device_unregister(&pd->v4l2_dev);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
return err;
}
static void dt3155_remove(struct pci_dev *pdev)
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{
struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
struct dt3155_priv *pd = container_of(v4l2_dev, struct dt3155_priv,
v4l2_dev);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
video_unregister_device(&pd->vdev);
free_irq(pd->pdev->irq, pd);
vb2_queue_release(&pd->vidq);
v4l2_device_unregister(&pd->v4l2_dev);
pci_iounmap(pdev, pd->regs);
pci_release_region(pdev, 0);
pci_disable_device(pdev);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
}
static const struct pci_device_id pci_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, DT3155_DEVICE_ID) },
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
{ 0, /* zero marks the end */ },
};
MODULE_DEVICE_TABLE(pci, pci_ids);
static struct pci_driver pci_driver = {
.name = DT3155_NAME,
.id_table = pci_ids,
.probe = dt3155_probe,
.remove = dt3155_remove,
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
};
module_pci_driver(pci_driver);
Staging: Yet another (third) dt3155 driver PCI/video4linux compliant Kernel module (device driver) for dt3155 frame grabber video4linux2 compliant (finally). Works with "xawtv -f". ====================================================== This driver is written (almost) from scratch, using the allocator developed for dt3155pci see bellow). The driver uses videobuf-dma-contig interface modified to use the above mentioned allocator instead of dma_alloc_coheren(). The first thing to do was to design a new allocator based on allocating a configurable number of 4MB chunks of memory, that latter are broken into frame buffers of 768x576 bytes kept in different FIFOs (queues). As far as the driver autoloads as a kernel module during kernel boot, the allocation of 4MB chunks succeeds. The driver keeps three FIFOs: one for 4MB chunks, one for free buffers (available for allocations) and one for buffers already allocated. Allocation/deallocation is done automatically though the video4linux videobuf subsystem (some pointers to functions are replaced by driver supplied functions). Sure, there are problems: 1. The device tested to work with "xawtv -f" either via read() method (DT3155_STREAMING not selected), or via mmap() method (DT3155_STREAMING is selected) only. This coresponds to either cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE; or cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING; but not when cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING | V4L2_CAP_READWRITE; This is because xawtv calls poll() before starting streaming, but videobuf_poll_stream() automatically starts reading if streaming is not started. This selection is made during kernel configuration (for now). 2. Works for CCIR, but should work for RS-170 (not tested) This is made also during kernel configuration. 3. Could work for multiple dt3155 frame grabbers in a PC, (private data is allocated during PCI probe() method), but is not tested due to lack of a second board. 4. Not tested on a BIG ENDIAN architecture. 5. Many others you could find .... :-) All critics, comments, suggestions are wellcome. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30 23:36:09 +08:00
MODULE_DESCRIPTION("video4linux pci-driver for dt3155 frame grabber");
MODULE_AUTHOR("Marin Mitov <mitov@issp.bas.bg>");
MODULE_VERSION(DT3155_VERSION);
MODULE_LICENSE("GPL");