OpenCloudOS-Kernel/net/sunrpc/svc.c

1645 lines
39 KiB
C
Raw Normal View History

/*
* linux/net/sunrpc/svc.c
*
* High-level RPC service routines
*
* Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
*
* Multiple threads pools and NUMAisation
* Copyright (c) 2006 Silicon Graphics, Inc.
* by Greg Banks <gnb@melbourne.sgi.com>
*/
#include <linux/linkage.h>
#include <linux/sched/signal.h>
#include <linux/errno.h>
#include <linux/net.h>
#include <linux/in.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/kthread.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 16:04:11 +08:00
#include <linux/slab.h>
#include <linux/sunrpc/types.h>
#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/stats.h>
#include <linux/sunrpc/svcsock.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/bc_xprt.h>
#include <trace/events/sunrpc.h>
#define RPCDBG_FACILITY RPCDBG_SVCDSP
static void svc_unregister(const struct svc_serv *serv, struct net *net);
#define svc_serv_is_pooled(serv) ((serv)->sv_ops->svo_function)
#define SVC_POOL_DEFAULT SVC_POOL_GLOBAL
/*
* Structure for mapping cpus to pools and vice versa.
* Setup once during sunrpc initialisation.
*/
struct svc_pool_map svc_pool_map = {
.mode = SVC_POOL_DEFAULT
};
EXPORT_SYMBOL_GPL(svc_pool_map);
static DEFINE_MUTEX(svc_pool_map_mutex);/* protects svc_pool_map.count only */
static int
param_set_pool_mode(const char *val, const struct kernel_param *kp)
{
int *ip = (int *)kp->arg;
struct svc_pool_map *m = &svc_pool_map;
int err;
mutex_lock(&svc_pool_map_mutex);
err = -EBUSY;
if (m->count)
goto out;
err = 0;
if (!strncmp(val, "auto", 4))
*ip = SVC_POOL_AUTO;
else if (!strncmp(val, "global", 6))
*ip = SVC_POOL_GLOBAL;
else if (!strncmp(val, "percpu", 6))
*ip = SVC_POOL_PERCPU;
else if (!strncmp(val, "pernode", 7))
*ip = SVC_POOL_PERNODE;
else
err = -EINVAL;
out:
mutex_unlock(&svc_pool_map_mutex);
return err;
}
static int
param_get_pool_mode(char *buf, const struct kernel_param *kp)
{
int *ip = (int *)kp->arg;
switch (*ip)
{
case SVC_POOL_AUTO:
return strlcpy(buf, "auto", 20);
case SVC_POOL_GLOBAL:
return strlcpy(buf, "global", 20);
case SVC_POOL_PERCPU:
return strlcpy(buf, "percpu", 20);
case SVC_POOL_PERNODE:
return strlcpy(buf, "pernode", 20);
default:
return sprintf(buf, "%d", *ip);
}
}
module_param_call(pool_mode, param_set_pool_mode, param_get_pool_mode,
&svc_pool_map.mode, 0644);
/*
* Detect best pool mapping mode heuristically,
* according to the machine's topology.
*/
static int
svc_pool_map_choose_mode(void)
{
unsigned int node;
if (nr_online_nodes > 1) {
/*
* Actually have multiple NUMA nodes,
* so split pools on NUMA node boundaries
*/
return SVC_POOL_PERNODE;
}
node = first_online_node;
if (nr_cpus_node(node) > 2) {
/*
* Non-trivial SMP, or CONFIG_NUMA on
* non-NUMA hardware, e.g. with a generic
* x86_64 kernel on Xeons. In this case we
* want to divide the pools on cpu boundaries.
*/
return SVC_POOL_PERCPU;
}
/* default: one global pool */
return SVC_POOL_GLOBAL;
}
/*
* Allocate the to_pool[] and pool_to[] arrays.
* Returns 0 on success or an errno.
*/
static int
svc_pool_map_alloc_arrays(struct svc_pool_map *m, unsigned int maxpools)
{
m->to_pool = kcalloc(maxpools, sizeof(unsigned int), GFP_KERNEL);
if (!m->to_pool)
goto fail;
m->pool_to = kcalloc(maxpools, sizeof(unsigned int), GFP_KERNEL);
if (!m->pool_to)
goto fail_free;
return 0;
fail_free:
kfree(m->to_pool);
m->to_pool = NULL;
fail:
return -ENOMEM;
}
/*
* Initialise the pool map for SVC_POOL_PERCPU mode.
* Returns number of pools or <0 on error.
*/
static int
svc_pool_map_init_percpu(struct svc_pool_map *m)
{
unsigned int maxpools = nr_cpu_ids;
unsigned int pidx = 0;
unsigned int cpu;
int err;
err = svc_pool_map_alloc_arrays(m, maxpools);
if (err)
return err;
for_each_online_cpu(cpu) {
BUG_ON(pidx >= maxpools);
m->to_pool[cpu] = pidx;
m->pool_to[pidx] = cpu;
pidx++;
}
/* cpus brought online later all get mapped to pool0, sorry */
return pidx;
};
/*
* Initialise the pool map for SVC_POOL_PERNODE mode.
* Returns number of pools or <0 on error.
*/
static int
svc_pool_map_init_pernode(struct svc_pool_map *m)
{
unsigned int maxpools = nr_node_ids;
unsigned int pidx = 0;
unsigned int node;
int err;
err = svc_pool_map_alloc_arrays(m, maxpools);
if (err)
return err;
for_each_node_with_cpus(node) {
/* some architectures (e.g. SN2) have cpuless nodes */
BUG_ON(pidx > maxpools);
m->to_pool[node] = pidx;
m->pool_to[pidx] = node;
pidx++;
}
/* nodes brought online later all get mapped to pool0, sorry */
return pidx;
}
/*
* Add a reference to the global map of cpus to pools (and
* vice versa). Initialise the map if we're the first user.
* Returns the number of pools.
*/
unsigned int
svc_pool_map_get(void)
{
struct svc_pool_map *m = &svc_pool_map;
int npools = -1;
mutex_lock(&svc_pool_map_mutex);
if (m->count++) {
mutex_unlock(&svc_pool_map_mutex);
return m->npools;
}
if (m->mode == SVC_POOL_AUTO)
m->mode = svc_pool_map_choose_mode();
switch (m->mode) {
case SVC_POOL_PERCPU:
npools = svc_pool_map_init_percpu(m);
break;
case SVC_POOL_PERNODE:
npools = svc_pool_map_init_pernode(m);
break;
}
if (npools < 0) {
/* default, or memory allocation failure */
npools = 1;
m->mode = SVC_POOL_GLOBAL;
}
m->npools = npools;
mutex_unlock(&svc_pool_map_mutex);
return m->npools;
}
EXPORT_SYMBOL_GPL(svc_pool_map_get);
/*
* Drop a reference to the global map of cpus to pools.
* When the last reference is dropped, the map data is
* freed; this allows the sysadmin to change the pool
* mode using the pool_mode module option without
* rebooting or re-loading sunrpc.ko.
*/
void
svc_pool_map_put(void)
{
struct svc_pool_map *m = &svc_pool_map;
mutex_lock(&svc_pool_map_mutex);
if (!--m->count) {
kfree(m->to_pool);
m->to_pool = NULL;
kfree(m->pool_to);
m->pool_to = NULL;
m->npools = 0;
}
mutex_unlock(&svc_pool_map_mutex);
}
EXPORT_SYMBOL_GPL(svc_pool_map_put);
static int svc_pool_map_get_node(unsigned int pidx)
{
const struct svc_pool_map *m = &svc_pool_map;
if (m->count) {
if (m->mode == SVC_POOL_PERCPU)
return cpu_to_node(m->pool_to[pidx]);
if (m->mode == SVC_POOL_PERNODE)
return m->pool_to[pidx];
}
return NUMA_NO_NODE;
}
/*
* Set the given thread's cpus_allowed mask so that it
* will only run on cpus in the given pool.
*/
static inline void
svc_pool_map_set_cpumask(struct task_struct *task, unsigned int pidx)
{
struct svc_pool_map *m = &svc_pool_map;
unsigned int node = m->pool_to[pidx];
/*
* The caller checks for sv_nrpools > 1, which
* implies that we've been initialized.
*/
WARN_ON_ONCE(m->count == 0);
if (m->count == 0)
return;
switch (m->mode) {
case SVC_POOL_PERCPU:
{
set_cpus_allowed_ptr(task, cpumask_of(node));
break;
}
case SVC_POOL_PERNODE:
{
set_cpus_allowed_ptr(task, cpumask_of_node(node));
break;
}
}
}
/*
* Use the mapping mode to choose a pool for a given CPU.
* Used when enqueueing an incoming RPC. Always returns
* a non-NULL pool pointer.
*/
struct svc_pool *
svc_pool_for_cpu(struct svc_serv *serv, int cpu)
{
struct svc_pool_map *m = &svc_pool_map;
unsigned int pidx = 0;
/*
* An uninitialised map happens in a pure client when
* lockd is brought up, so silently treat it the
* same as SVC_POOL_GLOBAL.
*/
if (svc_serv_is_pooled(serv)) {
switch (m->mode) {
case SVC_POOL_PERCPU:
pidx = m->to_pool[cpu];
break;
case SVC_POOL_PERNODE:
pidx = m->to_pool[cpu_to_node(cpu)];
break;
}
}
return &serv->sv_pools[pidx % serv->sv_nrpools];
}
int svc_rpcb_setup(struct svc_serv *serv, struct net *net)
{
int err;
err = rpcb_create_local(net);
if (err)
return err;
/* Remove any stale portmap registrations */
svc_unregister(serv, net);
return 0;
}
EXPORT_SYMBOL_GPL(svc_rpcb_setup);
void svc_rpcb_cleanup(struct svc_serv *serv, struct net *net)
{
svc_unregister(serv, net);
rpcb_put_local(net);
}
EXPORT_SYMBOL_GPL(svc_rpcb_cleanup);
static int svc_uses_rpcbind(struct svc_serv *serv)
{
struct svc_program *progp;
unsigned int i;
for (progp = serv->sv_program; progp; progp = progp->pg_next) {
for (i = 0; i < progp->pg_nvers; i++) {
if (progp->pg_vers[i] == NULL)
continue;
if (!progp->pg_vers[i]->vs_hidden)
return 1;
}
}
return 0;
}
int svc_bind(struct svc_serv *serv, struct net *net)
{
if (!svc_uses_rpcbind(serv))
return 0;
return svc_rpcb_setup(serv, net);
}
EXPORT_SYMBOL_GPL(svc_bind);
#if defined(CONFIG_SUNRPC_BACKCHANNEL)
static void
__svc_init_bc(struct svc_serv *serv)
{
INIT_LIST_HEAD(&serv->sv_cb_list);
spin_lock_init(&serv->sv_cb_lock);
init_waitqueue_head(&serv->sv_cb_waitq);
}
#else
static void
__svc_init_bc(struct svc_serv *serv)
{
}
#endif
/*
* Create an RPC service
*/
static struct svc_serv *
__svc_create(struct svc_program *prog, unsigned int bufsize, int npools,
const struct svc_serv_ops *ops)
{
struct svc_serv *serv;
unsigned int vers;
unsigned int xdrsize;
unsigned int i;
if (!(serv = kzalloc(sizeof(*serv), GFP_KERNEL)))
return NULL;
serv->sv_name = prog->pg_name;
serv->sv_program = prog;
serv->sv_nrthreads = 1;
serv->sv_stats = prog->pg_stats;
if (bufsize > RPCSVC_MAXPAYLOAD)
bufsize = RPCSVC_MAXPAYLOAD;
serv->sv_max_payload = bufsize? bufsize : 4096;
serv->sv_max_mesg = roundup(serv->sv_max_payload + PAGE_SIZE, PAGE_SIZE);
serv->sv_ops = ops;
xdrsize = 0;
while (prog) {
prog->pg_lovers = prog->pg_nvers-1;
for (vers=0; vers<prog->pg_nvers ; vers++)
if (prog->pg_vers[vers]) {
prog->pg_hivers = vers;
if (prog->pg_lovers > vers)
prog->pg_lovers = vers;
if (prog->pg_vers[vers]->vs_xdrsize > xdrsize)
xdrsize = prog->pg_vers[vers]->vs_xdrsize;
}
prog = prog->pg_next;
}
serv->sv_xdrsize = xdrsize;
INIT_LIST_HEAD(&serv->sv_tempsocks);
INIT_LIST_HEAD(&serv->sv_permsocks);
timer_setup(&serv->sv_temptimer, NULL, 0);
spin_lock_init(&serv->sv_lock);
__svc_init_bc(serv);
serv->sv_nrpools = npools;
serv->sv_pools =
kcalloc(serv->sv_nrpools, sizeof(struct svc_pool),
GFP_KERNEL);
if (!serv->sv_pools) {
kfree(serv);
return NULL;
}
for (i = 0; i < serv->sv_nrpools; i++) {
struct svc_pool *pool = &serv->sv_pools[i];
dprintk("svc: initialising pool %u for %s\n",
i, serv->sv_name);
pool->sp_id = i;
INIT_LIST_HEAD(&pool->sp_sockets);
INIT_LIST_HEAD(&pool->sp_all_threads);
spin_lock_init(&pool->sp_lock);
}
return serv;
}
struct svc_serv *
svc_create(struct svc_program *prog, unsigned int bufsize,
const struct svc_serv_ops *ops)
{
return __svc_create(prog, bufsize, /*npools*/1, ops);
}
EXPORT_SYMBOL_GPL(svc_create);
struct svc_serv *
svc_create_pooled(struct svc_program *prog, unsigned int bufsize,
const struct svc_serv_ops *ops)
{
struct svc_serv *serv;
unsigned int npools = svc_pool_map_get();
serv = __svc_create(prog, bufsize, npools, ops);
if (!serv)
goto out_err;
return serv;
out_err:
svc_pool_map_put();
return NULL;
}
EXPORT_SYMBOL_GPL(svc_create_pooled);
void svc_shutdown_net(struct svc_serv *serv, struct net *net)
{
svc_close_net(serv, net);
if (serv->sv_ops->svo_shutdown)
serv->sv_ops->svo_shutdown(serv, net);
}
EXPORT_SYMBOL_GPL(svc_shutdown_net);
/*
* Destroy an RPC service. Should be called with appropriate locking to
* protect the sv_nrthreads, sv_permsocks and sv_tempsocks.
*/
void
svc_destroy(struct svc_serv *serv)
{
dprintk("svc: svc_destroy(%s, %d)\n",
serv->sv_program->pg_name,
serv->sv_nrthreads);
if (serv->sv_nrthreads) {
if (--(serv->sv_nrthreads) != 0) {
svc_sock_update_bufs(serv);
return;
}
} else
printk("svc_destroy: no threads for serv=%p!\n", serv);
del_timer_sync(&serv->sv_temptimer);
/*
* The last user is gone and thus all sockets have to be destroyed to
* the point. Check this.
*/
BUG_ON(!list_empty(&serv->sv_permsocks));
BUG_ON(!list_empty(&serv->sv_tempsocks));
cache_clean_deferred(serv);
if (svc_serv_is_pooled(serv))
svc_pool_map_put();
kfree(serv->sv_pools);
kfree(serv);
}
EXPORT_SYMBOL_GPL(svc_destroy);
/*
* Allocate an RPC server's buffer space.
* We allocate pages and place them in rq_argpages.
*/
static int
svc_init_buffer(struct svc_rqst *rqstp, unsigned int size, int node)
{
unsigned int pages, arghi;
/* bc_xprt uses fore channel allocated buffers */
if (svc_is_backchannel(rqstp))
return 1;
pages = size / PAGE_SIZE + 1; /* extra page as we hold both request and reply.
* We assume one is at most one page
*/
arghi = 0;
WARN_ON_ONCE(pages > RPCSVC_MAXPAGES);
if (pages > RPCSVC_MAXPAGES)
pages = RPCSVC_MAXPAGES;
while (pages) {
struct page *p = alloc_pages_node(node, GFP_KERNEL, 0);
if (!p)
break;
rqstp->rq_pages[arghi++] = p;
pages--;
}
return pages == 0;
}
/*
* Release an RPC server buffer
*/
static void
svc_release_buffer(struct svc_rqst *rqstp)
{
unsigned int i;
for (i = 0; i < ARRAY_SIZE(rqstp->rq_pages); i++)
if (rqstp->rq_pages[i])
put_page(rqstp->rq_pages[i]);
}
struct svc_rqst *
svc_rqst_alloc(struct svc_serv *serv, struct svc_pool *pool, int node)
{
struct svc_rqst *rqstp;
rqstp = kzalloc_node(sizeof(*rqstp), GFP_KERNEL, node);
if (!rqstp)
return rqstp;
sunrpc: convert to lockless lookup of queued server threads Testing has shown that the pool->sp_lock can be a bottleneck on a busy server. Every time data is received on a socket, the server must take that lock in order to dequeue a thread from the sp_threads list. Address this problem by eliminating the sp_threads list (which contains threads that are currently idle) and replacing it with a RQ_BUSY flag in svc_rqst. This allows us to walk the sp_all_threads list under the rcu_read_lock and find a suitable thread for the xprt by doing a test_and_set_bit. Note that we do still have a potential atomicity problem however with this approach. We don't want svc_xprt_do_enqueue to set the rqst->rq_xprt pointer unless a test_and_set_bit of RQ_BUSY returned zero (which indicates that the thread was idle). But, by the time we check that, the bit could be flipped by a waking thread. To address this, we acquire a new per-rqst spinlock (rq_lock) and take that before doing the test_and_set_bit. If that returns false, then we can set rq_xprt and drop the spinlock. Then, when the thread wakes up, it must set the bit under the same spinlock and can trust that if it was already set then the rq_xprt is also properly set. With this scheme, the case where we have an idle thread no longer needs to take the highly contended pool->sp_lock at all, and that removes the bottleneck. That still leaves one issue: What of the case where we walk the whole sp_all_threads list and don't find an idle thread? Because the search is lockess, it's possible for the queueing to race with a thread that is going to sleep. To address that, we queue the xprt and then search again. If we find an idle thread at that point, we can't attach the xprt to it directly since that might race with a different thread waking up and finding it. All we can do is wake the idle thread back up and let it attempt to find the now-queued xprt. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Tested-by: Chris Worley <chris.worley@primarydata.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-11-22 03:19:30 +08:00
__set_bit(RQ_BUSY, &rqstp->rq_flags);
spin_lock_init(&rqstp->rq_lock);
rqstp->rq_server = serv;
rqstp->rq_pool = pool;
rqstp->rq_argp = kmalloc_node(serv->sv_xdrsize, GFP_KERNEL, node);
if (!rqstp->rq_argp)
goto out_enomem;
rqstp->rq_resp = kmalloc_node(serv->sv_xdrsize, GFP_KERNEL, node);
if (!rqstp->rq_resp)
goto out_enomem;
if (!svc_init_buffer(rqstp, serv->sv_max_mesg, node))
goto out_enomem;
return rqstp;
out_enomem:
svc_rqst_free(rqstp);
return NULL;
}
EXPORT_SYMBOL_GPL(svc_rqst_alloc);
struct svc_rqst *
svc_prepare_thread(struct svc_serv *serv, struct svc_pool *pool, int node)
{
struct svc_rqst *rqstp;
rqstp = svc_rqst_alloc(serv, pool, node);
if (!rqstp)
return ERR_PTR(-ENOMEM);
serv->sv_nrthreads++;
spin_lock_bh(&pool->sp_lock);
pool->sp_nrthreads++;
list_add_rcu(&rqstp->rq_all, &pool->sp_all_threads);
spin_unlock_bh(&pool->sp_lock);
return rqstp;
}
EXPORT_SYMBOL_GPL(svc_prepare_thread);
/*
* Choose a pool in which to create a new thread, for svc_set_num_threads
*/
static inline struct svc_pool *
choose_pool(struct svc_serv *serv, struct svc_pool *pool, unsigned int *state)
{
if (pool != NULL)
return pool;
return &serv->sv_pools[(*state)++ % serv->sv_nrpools];
}
/*
* Choose a thread to kill, for svc_set_num_threads
*/
static inline struct task_struct *
choose_victim(struct svc_serv *serv, struct svc_pool *pool, unsigned int *state)
{
unsigned int i;
struct task_struct *task = NULL;
if (pool != NULL) {
spin_lock_bh(&pool->sp_lock);
} else {
/* choose a pool in round-robin fashion */
for (i = 0; i < serv->sv_nrpools; i++) {
pool = &serv->sv_pools[--(*state) % serv->sv_nrpools];
spin_lock_bh(&pool->sp_lock);
if (!list_empty(&pool->sp_all_threads))
goto found_pool;
spin_unlock_bh(&pool->sp_lock);
}
return NULL;
}
found_pool:
if (!list_empty(&pool->sp_all_threads)) {
struct svc_rqst *rqstp;
/*
* Remove from the pool->sp_all_threads list
* so we don't try to kill it again.
*/
rqstp = list_entry(pool->sp_all_threads.next, struct svc_rqst, rq_all);
set_bit(RQ_VICTIM, &rqstp->rq_flags);
list_del_rcu(&rqstp->rq_all);
task = rqstp->rq_task;
}
spin_unlock_bh(&pool->sp_lock);
return task;
}
/* create new threads */
static int
svc_start_kthreads(struct svc_serv *serv, struct svc_pool *pool, int nrservs)
{
struct svc_rqst *rqstp;
struct task_struct *task;
struct svc_pool *chosen_pool;
unsigned int state = serv->sv_nrthreads-1;
int node;
do {
nrservs--;
chosen_pool = choose_pool(serv, pool, &state);
node = svc_pool_map_get_node(chosen_pool->sp_id);
rqstp = svc_prepare_thread(serv, chosen_pool, node);
if (IS_ERR(rqstp))
return PTR_ERR(rqstp);
__module_get(serv->sv_ops->svo_module);
task = kthread_create_on_node(serv->sv_ops->svo_function, rqstp,
node, "%s", serv->sv_name);
if (IS_ERR(task)) {
module_put(serv->sv_ops->svo_module);
svc_exit_thread(rqstp);
return PTR_ERR(task);
}
rqstp->rq_task = task;
if (serv->sv_nrpools > 1)
svc_pool_map_set_cpumask(task, chosen_pool->sp_id);
svc_sock_update_bufs(serv);
wake_up_process(task);
} while (nrservs > 0);
return 0;
}
/* destroy old threads */
static int
svc_signal_kthreads(struct svc_serv *serv, struct svc_pool *pool, int nrservs)
{
struct task_struct *task;
unsigned int state = serv->sv_nrthreads-1;
/* destroy old threads */
do {
task = choose_victim(serv, pool, &state);
if (task == NULL)
break;
send_sig(SIGINT, task, 1);
nrservs++;
} while (nrservs < 0);
return 0;
}
/*
* Create or destroy enough new threads to make the number
* of threads the given number. If `pool' is non-NULL, applies
* only to threads in that pool, otherwise round-robins between
* all pools. Caller must ensure that mutual exclusion between this and
* server startup or shutdown.
*
* Destroying threads relies on the service threads filling in
* rqstp->rq_task, which only the nfs ones do. Assumes the serv
* has been created using svc_create_pooled().
*
* Based on code that used to be in nfsd_svc() but tweaked
* to be pool-aware.
*/
int
svc_set_num_threads(struct svc_serv *serv, struct svc_pool *pool, int nrservs)
{
if (pool == NULL) {
/* The -1 assumes caller has done a svc_get() */
nrservs -= (serv->sv_nrthreads-1);
} else {
spin_lock_bh(&pool->sp_lock);
nrservs -= pool->sp_nrthreads;
spin_unlock_bh(&pool->sp_lock);
}
if (nrservs > 0)
return svc_start_kthreads(serv, pool, nrservs);
if (nrservs < 0)
return svc_signal_kthreads(serv, pool, nrservs);
return 0;
}
EXPORT_SYMBOL_GPL(svc_set_num_threads);
/* destroy old threads */
static int
svc_stop_kthreads(struct svc_serv *serv, struct svc_pool *pool, int nrservs)
{
struct task_struct *task;
unsigned int state = serv->sv_nrthreads-1;
/* destroy old threads */
do {
task = choose_victim(serv, pool, &state);
if (task == NULL)
break;
kthread_stop(task);
nrservs++;
} while (nrservs < 0);
return 0;
}
int
svc_set_num_threads_sync(struct svc_serv *serv, struct svc_pool *pool, int nrservs)
{
if (pool == NULL) {
/* The -1 assumes caller has done a svc_get() */
nrservs -= (serv->sv_nrthreads-1);
} else {
spin_lock_bh(&pool->sp_lock);
nrservs -= pool->sp_nrthreads;
spin_unlock_bh(&pool->sp_lock);
}
if (nrservs > 0)
return svc_start_kthreads(serv, pool, nrservs);
if (nrservs < 0)
return svc_stop_kthreads(serv, pool, nrservs);
return 0;
}
EXPORT_SYMBOL_GPL(svc_set_num_threads_sync);
/*
* Called from a server thread as it's exiting. Caller must hold the "service
* mutex" for the service.
*/
void
svc_rqst_free(struct svc_rqst *rqstp)
{
svc_release_buffer(rqstp);
kfree(rqstp->rq_resp);
kfree(rqstp->rq_argp);
kfree(rqstp->rq_auth_data);
kfree_rcu(rqstp, rq_rcu_head);
}
EXPORT_SYMBOL_GPL(svc_rqst_free);
void
svc_exit_thread(struct svc_rqst *rqstp)
{
struct svc_serv *serv = rqstp->rq_server;
struct svc_pool *pool = rqstp->rq_pool;
spin_lock_bh(&pool->sp_lock);
pool->sp_nrthreads--;
if (!test_and_set_bit(RQ_VICTIM, &rqstp->rq_flags))
list_del_rcu(&rqstp->rq_all);
spin_unlock_bh(&pool->sp_lock);
svc_rqst_free(rqstp);
/* Release the server */
if (serv)
svc_destroy(serv);
}
EXPORT_SYMBOL_GPL(svc_exit_thread);
/*
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
* Register an "inet" protocol family netid with the local
* rpcbind daemon via an rpcbind v4 SET request.
*
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
* No netconfig infrastructure is available in the kernel, so
* we map IP_ protocol numbers to netids by hand.
*
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
* Returns zero on success; a negative errno value is returned
* if any error occurs.
*/
static int __svc_rpcb_register4(struct net *net, const u32 program,
const u32 version,
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
const unsigned short protocol,
const unsigned short port)
{
SUNRPC: Simplify kernel RPC service registration The kernel registers RPC services with the local portmapper with an rpcbind SET upcall to the local portmapper. Traditionally, this used rpcbind v2 (PMAP), but registering RPC services that support IPv6 requires rpcbind v3 or v4. Since we now want separate PF_INET and PF_INET6 listeners for each kernel RPC service, svc_register() will do only one of those registrations at a time. For PF_INET, it tries an rpcb v4 SET upcall first; if that fails, it does a legacy portmap SET. This makes it entirely backwards compatible with legacy user space, but allows a proper v4 SET to be used if rpcbind is available. For PF_INET6, it does an rpcb v4 SET upcall. If that fails, it fails the registration, and thus the transport creation. This let's the kernel detect if user space is able to support IPv6 RPC services, and thus whether it should maintain a PF_INET6 listener for each service at all. This provides complete backwards compatibilty with legacy user space that only supports rpcbind v2. The only down-side is that registering a new kernel RPC service may take an extra exchange with the local portmapper on legacy systems, but this is an infrequent operation and is done over UDP (no lingering sockets in TIMEWAIT), so it shouldn't be consequential. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 08:47:36 +08:00
const struct sockaddr_in sin = {
.sin_family = AF_INET,
.sin_addr.s_addr = htonl(INADDR_ANY),
.sin_port = htons(port),
};
SUNRPC: Simplify kernel RPC service registration The kernel registers RPC services with the local portmapper with an rpcbind SET upcall to the local portmapper. Traditionally, this used rpcbind v2 (PMAP), but registering RPC services that support IPv6 requires rpcbind v3 or v4. Since we now want separate PF_INET and PF_INET6 listeners for each kernel RPC service, svc_register() will do only one of those registrations at a time. For PF_INET, it tries an rpcb v4 SET upcall first; if that fails, it does a legacy portmap SET. This makes it entirely backwards compatible with legacy user space, but allows a proper v4 SET to be used if rpcbind is available. For PF_INET6, it does an rpcb v4 SET upcall. If that fails, it fails the registration, and thus the transport creation. This let's the kernel detect if user space is able to support IPv6 RPC services, and thus whether it should maintain a PF_INET6 listener for each service at all. This provides complete backwards compatibilty with legacy user space that only supports rpcbind v2. The only down-side is that registering a new kernel RPC service may take an extra exchange with the local portmapper on legacy systems, but this is an infrequent operation and is done over UDP (no lingering sockets in TIMEWAIT), so it shouldn't be consequential. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 08:47:36 +08:00
const char *netid;
int error;
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
switch (protocol) {
case IPPROTO_UDP:
netid = RPCBIND_NETID_UDP;
break;
case IPPROTO_TCP:
netid = RPCBIND_NETID_TCP;
break;
default:
return -ENOPROTOOPT;
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
}
error = rpcb_v4_register(net, program, version,
SUNRPC: Simplify kernel RPC service registration The kernel registers RPC services with the local portmapper with an rpcbind SET upcall to the local portmapper. Traditionally, this used rpcbind v2 (PMAP), but registering RPC services that support IPv6 requires rpcbind v3 or v4. Since we now want separate PF_INET and PF_INET6 listeners for each kernel RPC service, svc_register() will do only one of those registrations at a time. For PF_INET, it tries an rpcb v4 SET upcall first; if that fails, it does a legacy portmap SET. This makes it entirely backwards compatible with legacy user space, but allows a proper v4 SET to be used if rpcbind is available. For PF_INET6, it does an rpcb v4 SET upcall. If that fails, it fails the registration, and thus the transport creation. This let's the kernel detect if user space is able to support IPv6 RPC services, and thus whether it should maintain a PF_INET6 listener for each service at all. This provides complete backwards compatibilty with legacy user space that only supports rpcbind v2. The only down-side is that registering a new kernel RPC service may take an extra exchange with the local portmapper on legacy systems, but this is an infrequent operation and is done over UDP (no lingering sockets in TIMEWAIT), so it shouldn't be consequential. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 08:47:36 +08:00
(const struct sockaddr *)&sin, netid);
/*
* User space didn't support rpcbind v4, so retry this
* registration request with the legacy rpcbind v2 protocol.
*/
if (error == -EPROTONOSUPPORT)
error = rpcb_register(net, program, version, protocol, port);
SUNRPC: Simplify kernel RPC service registration The kernel registers RPC services with the local portmapper with an rpcbind SET upcall to the local portmapper. Traditionally, this used rpcbind v2 (PMAP), but registering RPC services that support IPv6 requires rpcbind v3 or v4. Since we now want separate PF_INET and PF_INET6 listeners for each kernel RPC service, svc_register() will do only one of those registrations at a time. For PF_INET, it tries an rpcb v4 SET upcall first; if that fails, it does a legacy portmap SET. This makes it entirely backwards compatible with legacy user space, but allows a proper v4 SET to be used if rpcbind is available. For PF_INET6, it does an rpcb v4 SET upcall. If that fails, it fails the registration, and thus the transport creation. This let's the kernel detect if user space is able to support IPv6 RPC services, and thus whether it should maintain a PF_INET6 listener for each service at all. This provides complete backwards compatibilty with legacy user space that only supports rpcbind v2. The only down-side is that registering a new kernel RPC service may take an extra exchange with the local portmapper on legacy systems, but this is an infrequent operation and is done over UDP (no lingering sockets in TIMEWAIT), so it shouldn't be consequential. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 08:47:36 +08:00
return error;
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
}
#if IS_ENABLED(CONFIG_IPV6)
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
/*
* Register an "inet6" protocol family netid with the local
* rpcbind daemon via an rpcbind v4 SET request.
*
* No netconfig infrastructure is available in the kernel, so
* we map IP_ protocol numbers to netids by hand.
*
* Returns zero on success; a negative errno value is returned
* if any error occurs.
*/
static int __svc_rpcb_register6(struct net *net, const u32 program,
const u32 version,
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
const unsigned short protocol,
const unsigned short port)
{
SUNRPC: Simplify kernel RPC service registration The kernel registers RPC services with the local portmapper with an rpcbind SET upcall to the local portmapper. Traditionally, this used rpcbind v2 (PMAP), but registering RPC services that support IPv6 requires rpcbind v3 or v4. Since we now want separate PF_INET and PF_INET6 listeners for each kernel RPC service, svc_register() will do only one of those registrations at a time. For PF_INET, it tries an rpcb v4 SET upcall first; if that fails, it does a legacy portmap SET. This makes it entirely backwards compatible with legacy user space, but allows a proper v4 SET to be used if rpcbind is available. For PF_INET6, it does an rpcb v4 SET upcall. If that fails, it fails the registration, and thus the transport creation. This let's the kernel detect if user space is able to support IPv6 RPC services, and thus whether it should maintain a PF_INET6 listener for each service at all. This provides complete backwards compatibilty with legacy user space that only supports rpcbind v2. The only down-side is that registering a new kernel RPC service may take an extra exchange with the local portmapper on legacy systems, but this is an infrequent operation and is done over UDP (no lingering sockets in TIMEWAIT), so it shouldn't be consequential. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 08:47:36 +08:00
const struct sockaddr_in6 sin6 = {
.sin6_family = AF_INET6,
.sin6_addr = IN6ADDR_ANY_INIT,
.sin6_port = htons(port),
};
SUNRPC: Simplify kernel RPC service registration The kernel registers RPC services with the local portmapper with an rpcbind SET upcall to the local portmapper. Traditionally, this used rpcbind v2 (PMAP), but registering RPC services that support IPv6 requires rpcbind v3 or v4. Since we now want separate PF_INET and PF_INET6 listeners for each kernel RPC service, svc_register() will do only one of those registrations at a time. For PF_INET, it tries an rpcb v4 SET upcall first; if that fails, it does a legacy portmap SET. This makes it entirely backwards compatible with legacy user space, but allows a proper v4 SET to be used if rpcbind is available. For PF_INET6, it does an rpcb v4 SET upcall. If that fails, it fails the registration, and thus the transport creation. This let's the kernel detect if user space is able to support IPv6 RPC services, and thus whether it should maintain a PF_INET6 listener for each service at all. This provides complete backwards compatibilty with legacy user space that only supports rpcbind v2. The only down-side is that registering a new kernel RPC service may take an extra exchange with the local portmapper on legacy systems, but this is an infrequent operation and is done over UDP (no lingering sockets in TIMEWAIT), so it shouldn't be consequential. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 08:47:36 +08:00
const char *netid;
int error;
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
switch (protocol) {
case IPPROTO_UDP:
netid = RPCBIND_NETID_UDP6;
break;
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
case IPPROTO_TCP:
netid = RPCBIND_NETID_TCP6;
break;
default:
return -ENOPROTOOPT;
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
}
error = rpcb_v4_register(net, program, version,
SUNRPC: Simplify kernel RPC service registration The kernel registers RPC services with the local portmapper with an rpcbind SET upcall to the local portmapper. Traditionally, this used rpcbind v2 (PMAP), but registering RPC services that support IPv6 requires rpcbind v3 or v4. Since we now want separate PF_INET and PF_INET6 listeners for each kernel RPC service, svc_register() will do only one of those registrations at a time. For PF_INET, it tries an rpcb v4 SET upcall first; if that fails, it does a legacy portmap SET. This makes it entirely backwards compatible with legacy user space, but allows a proper v4 SET to be used if rpcbind is available. For PF_INET6, it does an rpcb v4 SET upcall. If that fails, it fails the registration, and thus the transport creation. This let's the kernel detect if user space is able to support IPv6 RPC services, and thus whether it should maintain a PF_INET6 listener for each service at all. This provides complete backwards compatibilty with legacy user space that only supports rpcbind v2. The only down-side is that registering a new kernel RPC service may take an extra exchange with the local portmapper on legacy systems, but this is an infrequent operation and is done over UDP (no lingering sockets in TIMEWAIT), so it shouldn't be consequential. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 08:47:36 +08:00
(const struct sockaddr *)&sin6, netid);
/*
* User space didn't support rpcbind version 4, so we won't
* use a PF_INET6 listener.
*/
if (error == -EPROTONOSUPPORT)
error = -EAFNOSUPPORT;
return error;
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
}
#endif /* IS_ENABLED(CONFIG_IPV6) */
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
/*
* Register a kernel RPC service via rpcbind version 4.
*
* Returns zero on success; a negative errno value is returned
* if any error occurs.
*/
static int __svc_register(struct net *net, const char *progname,
const u32 program, const u32 version,
const int family,
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
const unsigned short protocol,
const unsigned short port)
{
int error = -EAFNOSUPPORT;
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
switch (family) {
case PF_INET:
error = __svc_rpcb_register4(net, program, version,
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
protocol, port);
SUNRPC: Simplify kernel RPC service registration The kernel registers RPC services with the local portmapper with an rpcbind SET upcall to the local portmapper. Traditionally, this used rpcbind v2 (PMAP), but registering RPC services that support IPv6 requires rpcbind v3 or v4. Since we now want separate PF_INET and PF_INET6 listeners for each kernel RPC service, svc_register() will do only one of those registrations at a time. For PF_INET, it tries an rpcb v4 SET upcall first; if that fails, it does a legacy portmap SET. This makes it entirely backwards compatible with legacy user space, but allows a proper v4 SET to be used if rpcbind is available. For PF_INET6, it does an rpcb v4 SET upcall. If that fails, it fails the registration, and thus the transport creation. This let's the kernel detect if user space is able to support IPv6 RPC services, and thus whether it should maintain a PF_INET6 listener for each service at all. This provides complete backwards compatibilty with legacy user space that only supports rpcbind v2. The only down-side is that registering a new kernel RPC service may take an extra exchange with the local portmapper on legacy systems, but this is an infrequent operation and is done over UDP (no lingering sockets in TIMEWAIT), so it shouldn't be consequential. This patch is part of a series that addresses http://bugzilla.kernel.org/show_bug.cgi?id=12256 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-03-19 08:47:36 +08:00
break;
#if IS_ENABLED(CONFIG_IPV6)
case PF_INET6:
error = __svc_rpcb_register6(net, program, version,
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
protocol, port);
#endif
}
return error;
}
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
/**
* svc_register - register an RPC service with the local portmapper
* @serv: svc_serv struct for the service to register
* @net: net namespace for the service to register
* @family: protocol family of service's listener socket
* @proto: transport protocol number to advertise
* @port: port to advertise
*
* Service is registered for any address in the passed-in protocol family
*/
int svc_register(const struct svc_serv *serv, struct net *net,
const int family, const unsigned short proto,
const unsigned short port)
{
struct svc_program *progp;
const struct svc_version *vers;
unsigned int i;
int error = 0;
WARN_ON_ONCE(proto == 0 && port == 0);
if (proto == 0 && port == 0)
return -EINVAL;
for (progp = serv->sv_program; progp; progp = progp->pg_next) {
for (i = 0; i < progp->pg_nvers; i++) {
vers = progp->pg_vers[i];
if (vers == NULL)
continue;
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
dprintk("svc: svc_register(%sv%d, %s, %u, %u)%s\n",
progp->pg_name,
SUNRPC: Register both netids for AF_INET6 servers TI-RPC is a user-space library of RPC functions that replaces ONC RPC and allows RPC to operate in the new world of IPv6. TI-RPC combines the concept of a transport protocol (UDP and TCP) and a protocol family (PF_INET and PF_INET6) into a single identifier called a "netid." For example, "udp" means UDP over IPv4, and "udp6" means UDP over IPv6. For rpcbind, then, the RPC service tuple that is registered and advertised is: [RPC program, RPC version, service address and port, netid] instead of [RPC program, RPC version, port, protocol] Service address is typically ANYADDR, but can be a specific address of one of the interfaces on a multi-homed host. The third item in the new tuple is expressed as a universal address. The current Linux rpcbind implementation registers a netid for both protocol families when RPCB_SET is done for just the PF_INET6 version of the netid (ie udp6 or tcp6). So registering "udp6" causes a registration for "udp" to appear automatically as well. We've recently determined that this is incorrect behavior. In the TI-RPC world, "udp6" is not meant to imply that the registered RPC service handles requests from AF_INET as well, even if the listener socket does address mapping. "udp" and "udp6" are entirely separate capabilities, and must be registered separately. The Linux kernel, unlike TI-RPC, leverages address mapping to allow a single listener socket to handle requests for both AF_INET and AF_INET6. This is still OK, but the kernel currently assumes registering "udp6" will cover "udp" as well. It registers only "udp6" for it's AF_INET6 services, even though they handle both AF_INET and AF_INET6 on the same port. So svc_register() actually needs to register both "udp" and "udp6" explicitly (and likewise for TCP). Until rpcbind is fixed, the kernel can ignore the return code for the second RPCB_SET call. Please merge this with commit 15231312: SUNRPC: Support IPv6 when registering kernel RPC services Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Cc: Olaf Kirch <okir@suse.de> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2008-09-16 05:27:23 +08:00
i,
proto == IPPROTO_UDP? "udp" : "tcp",
port,
family,
vers->vs_hidden ?
" (but not telling portmap)" : "");
if (vers->vs_hidden)
continue;
/*
* Don't register a UDP port if we need congestion
* control.
*/
if (vers->vs_need_cong_ctrl && proto == IPPROTO_UDP)
continue;
error = __svc_register(net, progp->pg_name, progp->pg_prog,
i, family, proto, port);
if (vers->vs_rpcb_optnl) {
error = 0;
continue;
}
if (error < 0) {
printk(KERN_WARNING "svc: failed to register "
"%sv%u RPC service (errno %d).\n",
progp->pg_name, i, -error);
break;
}
}
}
return error;
}
/*
* If user space is running rpcbind, it should take the v4 UNSET
* and clear everything for this [program, version]. If user space
* is running portmap, it will reject the v4 UNSET, but won't have
* any "inet6" entries anyway. So a PMAP_UNSET should be sufficient
* in this case to clear all existing entries for [program, version].
*/
static void __svc_unregister(struct net *net, const u32 program, const u32 version,
const char *progname)
{
int error;
error = rpcb_v4_register(net, program, version, NULL, "");
/*
* User space didn't support rpcbind v4, so retry this
* request with the legacy rpcbind v2 protocol.
*/
if (error == -EPROTONOSUPPORT)
error = rpcb_register(net, program, version, 0, 0);
dprintk("svc: %s(%sv%u), error %d\n",
__func__, progname, version, error);
}
/*
* All netids, bind addresses and ports registered for [program, version]
* are removed from the local rpcbind database (if the service is not
* hidden) to make way for a new instance of the service.
*
* The result of unregistration is reported via dprintk for those who want
* verification of the result, but is otherwise not important.
*/
static void svc_unregister(const struct svc_serv *serv, struct net *net)
{
struct svc_program *progp;
unsigned long flags;
unsigned int i;
clear_thread_flag(TIF_SIGPENDING);
for (progp = serv->sv_program; progp; progp = progp->pg_next) {
for (i = 0; i < progp->pg_nvers; i++) {
if (progp->pg_vers[i] == NULL)
continue;
if (progp->pg_vers[i]->vs_hidden)
continue;
dprintk("svc: attempting to unregister %sv%u\n",
progp->pg_name, i);
__svc_unregister(net, progp->pg_prog, i, progp->pg_name);
}
}
spin_lock_irqsave(&current->sighand->siglock, flags);
recalc_sigpending();
spin_unlock_irqrestore(&current->sighand->siglock, flags);
}
/*
* dprintk the given error with the address of the client that caused it.
*/
#if IS_ENABLED(CONFIG_SUNRPC_DEBUG)
static __printf(2, 3)
void svc_printk(struct svc_rqst *rqstp, const char *fmt, ...)
{
struct va_format vaf;
va_list args;
char buf[RPC_MAX_ADDRBUFLEN];
va_start(args, fmt);
vaf.fmt = fmt;
vaf.va = &args;
dprintk("svc: %s: %pV", svc_print_addr(rqstp, buf, sizeof(buf)), &vaf);
va_end(args);
}
#else
static __printf(2,3) void svc_printk(struct svc_rqst *rqstp, const char *fmt, ...) {}
#endif
/*
* Common routine for processing the RPC request.
*/
static int
svc_process_common(struct svc_rqst *rqstp, struct kvec *argv, struct kvec *resv)
{
struct svc_program *progp;
const struct svc_version *versp = NULL; /* compiler food */
const struct svc_procedure *procp = NULL;
struct svc_serv *serv = rqstp->rq_server;
__be32 *statp;
u32 prog, vers, proc;
__be32 auth_stat, rpc_stat;
int auth_res;
__be32 *reply_statp;
rpc_stat = rpc_success;
if (argv->iov_len < 6*4)
goto err_short_len;
sunrpc: Disable splice for krb5i Running a multi-threaded 8KB fio test (70/30 mix), three or four out of twelve of the jobs fail when using krb5i. The failure is an EIO on a read. Troubleshooting confirmed the EIO results when the client fails to verify the MIC of an NFS READ reply. Bruce suggested the problem could be due to the data payload changing between the time the reply's MIC was computed on the server and the time the reply was actually sent. krb5p gets around this problem by disabling RQ_SPLICE_OK. Use the same mechanism for krb5i RPCs. "iozone -i0 -i1 -s128m -y1k -az -I", export is tmpfs, mount is sec=krb5i,vers=3,proto=rdma. The important numbers are the read / reread column. Here's without the RQ_SPLICE_OK patch: kB reclen write rewrite read reread 131072 1 7546 7929 8396 8267 131072 2 14375 14600 15843 15639 131072 4 19280 19248 21303 21410 131072 8 32350 31772 35199 34883 131072 16 36748 37477 49365 51706 131072 32 55669 56059 57475 57389 131072 64 74599 75190 74903 75550 131072 128 99810 101446 102828 102724 131072 256 122042 122612 124806 125026 131072 512 137614 138004 141412 141267 131072 1024 146601 148774 151356 151409 131072 2048 180684 181727 293140 292840 131072 4096 206907 207658 552964 549029 131072 8192 223982 224360 454493 473469 131072 16384 228927 228390 654734 632607 And here's with it: kB reclen write rewrite read reread 131072 1 7700 7365 7958 8011 131072 2 13211 13303 14937 14414 131072 4 19001 19265 20544 20657 131072 8 30883 31097 34255 33566 131072 16 36868 34908 51499 49944 131072 32 56428 55535 58710 56952 131072 64 73507 74676 75619 74378 131072 128 100324 101442 103276 102736 131072 256 122517 122995 124639 124150 131072 512 137317 139007 140530 140830 131072 1024 146807 148923 151246 151072 131072 2048 179656 180732 292631 292034 131072 4096 206216 208583 543355 541951 131072 8192 223738 224273 494201 489372 131072 16384 229313 229840 691719 668427 I would say that there is not much difference in this test. For good measure, here's the same test with sec=krb5p: kB reclen write rewrite read reread 131072 1 5982 5881 6137 6218 131072 2 10216 10252 10850 10932 131072 4 12236 12575 15375 15526 131072 8 15461 15462 23821 22351 131072 16 25677 25811 27529 27640 131072 32 31903 32354 34063 33857 131072 64 42989 43188 45635 45561 131072 128 52848 53210 56144 56141 131072 256 59123 59214 62691 62933 131072 512 63140 63277 66887 67025 131072 1024 65255 65299 69213 69140 131072 2048 76454 76555 133767 133862 131072 4096 84726 84883 251925 250702 131072 8192 89491 89482 270821 276085 131072 16384 91572 91597 361768 336868 BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=307 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2017-06-20 02:00:40 +08:00
/* Will be turned off by GSS integrity and privacy services */
set_bit(RQ_SPLICE_OK, &rqstp->rq_flags);
/* Will be turned off only when NFSv4 Sessions are used */
set_bit(RQ_USEDEFERRAL, &rqstp->rq_flags);
clear_bit(RQ_DROPME, &rqstp->rq_flags);
/* Setup reply header */
rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp);
svc_putu32(resv, rqstp->rq_xid);
vers = svc_getnl(argv);
/* First words of reply: */
svc_putnl(resv, 1); /* REPLY */
if (vers != 2) /* RPC version number */
goto err_bad_rpc;
/* Save position in case we later decide to reject: */
reply_statp = resv->iov_base + resv->iov_len;
svc_putnl(resv, 0); /* ACCEPT */
rqstp->rq_prog = prog = svc_getnl(argv); /* program number */
rqstp->rq_vers = vers = svc_getnl(argv); /* version number */
rqstp->rq_proc = proc = svc_getnl(argv); /* procedure number */
for (progp = serv->sv_program; progp; progp = progp->pg_next)
if (prog == progp->pg_prog)
break;
/*
* Decode auth data, and add verifier to reply buffer.
* We do this before anything else in order to get a decent
* auth verifier.
*/
auth_res = svc_authenticate(rqstp, &auth_stat);
/* Also give the program a chance to reject this call: */
if (auth_res == SVC_OK && progp) {
auth_stat = rpc_autherr_badcred;
auth_res = progp->pg_authenticate(rqstp);
}
switch (auth_res) {
case SVC_OK:
break;
case SVC_GARBAGE:
goto err_garbage;
case SVC_SYSERR:
rpc_stat = rpc_system_err;
goto err_bad;
case SVC_DENIED:
goto err_bad_auth;
case SVC_CLOSE:
goto close;
case SVC_DROP:
goto dropit;
case SVC_COMPLETE:
goto sendit;
}
if (progp == NULL)
goto err_bad_prog;
if (vers >= progp->pg_nvers ||
!(versp = progp->pg_vers[vers]))
goto err_bad_vers;
/*
* Some protocol versions (namely NFSv4) require some form of
* congestion control. (See RFC 7530 section 3.1 paragraph 2)
* In other words, UDP is not allowed. We mark those when setting
* up the svc_xprt, and verify that here.
*
* The spec is not very clear about what error should be returned
* when someone tries to access a server that is listening on UDP
* for lower versions. RPC_PROG_MISMATCH seems to be the closest
* fit.
*/
if (versp->vs_need_cong_ctrl &&
!test_bit(XPT_CONG_CTRL, &rqstp->rq_xprt->xpt_flags))
goto err_bad_vers;
procp = versp->vs_proc + proc;
if (proc >= versp->vs_nproc || !procp->pc_func)
goto err_bad_proc;
rqstp->rq_procinfo = procp;
/* Syntactic check complete */
serv->sv_stats->rpccnt++;
trace_svc_process(rqstp, progp->pg_name);
/* Build the reply header. */
statp = resv->iov_base +resv->iov_len;
svc_putnl(resv, RPC_SUCCESS);
/* Bump per-procedure stats counter */
versp->vs_count[proc]++;
/* Initialize storage for argp and resp */
memset(rqstp->rq_argp, 0, procp->pc_argsize);
memset(rqstp->rq_resp, 0, procp->pc_ressize);
/* un-reserve some of the out-queue now that we have a
* better idea of reply size
*/
if (procp->pc_xdrressize)
RPC: add wrapper for svc_reserve to account for checksum When the kernel calls svc_reserve to downsize the expected size of an RPC reply, it fails to account for the possibility of a checksum at the end of the packet. If a client mounts a NFSv2/3 with sec=krb5i/p, and does I/O then you'll generally see messages similar to this in the server's ring buffer: RPC request reserved 164 but used 208 While I was never able to verify it, I suspect that this problem is also the root cause of some oopses I've seen under these conditions: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=227726 This is probably also a problem for other sec= types and for NFSv4. The large reserved size for NFSv4 compound packets seems to generally paper over the problem, however. This patch adds a wrapper for svc_reserve that accounts for the possibility of a checksum. It also fixes up the appropriate callers of svc_reserve to call the wrapper. For now, it just uses a hardcoded value that I determined via testing. That value may need to be revised upward as things change, or we may want to eventually add a new auth_op that attempts to calculate this somehow. Unfortunately, there doesn't seem to be a good way to reliably determine the expected checksum length prior to actually calculating it, particularly with schemes like spkm3. Signed-off-by: Jeff Layton <jlayton@redhat.com> Acked-by: Neil Brown <neilb@suse.de> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Acked-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-09 17:34:50 +08:00
svc_reserve_auth(rqstp, procp->pc_xdrressize<<2);
/* Call the function that processes the request. */
if (!versp->vs_dispatch) {
/*
* Decode arguments
* XXX: why do we ignore the return value?
*/
if (procp->pc_decode &&
!procp->pc_decode(rqstp, argv->iov_base))
goto err_garbage;
*statp = procp->pc_func(rqstp);
/* Encode reply */
if (*statp == rpc_drop_reply ||
test_bit(RQ_DROPME, &rqstp->rq_flags)) {
if (procp->pc_release)
procp->pc_release(rqstp);
goto dropit;
}
if (*statp == rpc_autherr_badcred) {
if (procp->pc_release)
procp->pc_release(rqstp);
goto err_bad_auth;
}
if (*statp == rpc_success && procp->pc_encode &&
!procp->pc_encode(rqstp, resv->iov_base + resv->iov_len)) {
dprintk("svc: failed to encode reply\n");
/* serv->sv_stats->rpcsystemerr++; */
*statp = rpc_system_err;
}
} else {
dprintk("svc: calling dispatcher\n");
if (!versp->vs_dispatch(rqstp, statp)) {
/* Release reply info */
if (procp->pc_release)
procp->pc_release(rqstp);
goto dropit;
}
}
/* Check RPC status result */
if (*statp != rpc_success)
resv->iov_len = ((void*)statp) - resv->iov_base + 4;
/* Release reply info */
if (procp->pc_release)
procp->pc_release(rqstp);
if (procp->pc_encode == NULL)
goto dropit;
sendit:
if (svc_authorise(rqstp))
goto close;
return 1; /* Caller can now send it */
dropit:
svc_authorise(rqstp); /* doesn't hurt to call this twice */
dprintk("svc: svc_process dropit\n");
return 0;
close:
if (test_bit(XPT_TEMP, &rqstp->rq_xprt->xpt_flags))
svc_close_xprt(rqstp->rq_xprt);
dprintk("svc: svc_process close\n");
return 0;
err_short_len:
svc_printk(rqstp, "short len %zd, dropping request\n",
argv->iov_len);
goto close;
err_bad_rpc:
serv->sv_stats->rpcbadfmt++;
svc_putnl(resv, 1); /* REJECT */
svc_putnl(resv, 0); /* RPC_MISMATCH */
svc_putnl(resv, 2); /* Only RPCv2 supported */
svc_putnl(resv, 2);
goto sendit;
err_bad_auth:
dprintk("svc: authentication failed (%d)\n", ntohl(auth_stat));
serv->sv_stats->rpcbadauth++;
/* Restore write pointer to location of accept status: */
xdr_ressize_check(rqstp, reply_statp);
svc_putnl(resv, 1); /* REJECT */
svc_putnl(resv, 1); /* AUTH_ERROR */
svc_putnl(resv, ntohl(auth_stat)); /* status */
goto sendit;
err_bad_prog:
dprintk("svc: unknown program %d\n", prog);
serv->sv_stats->rpcbadfmt++;
svc_putnl(resv, RPC_PROG_UNAVAIL);
goto sendit;
err_bad_vers:
svc_printk(rqstp, "unknown version (%d for prog %d, %s)\n",
vers, prog, progp->pg_name);
serv->sv_stats->rpcbadfmt++;
svc_putnl(resv, RPC_PROG_MISMATCH);
svc_putnl(resv, progp->pg_lovers);
svc_putnl(resv, progp->pg_hivers);
goto sendit;
err_bad_proc:
svc_printk(rqstp, "unknown procedure (%d)\n", proc);
serv->sv_stats->rpcbadfmt++;
svc_putnl(resv, RPC_PROC_UNAVAIL);
goto sendit;
err_garbage:
svc_printk(rqstp, "failed to decode args\n");
rpc_stat = rpc_garbage_args;
err_bad:
serv->sv_stats->rpcbadfmt++;
svc_putnl(resv, ntohl(rpc_stat));
goto sendit;
}
/*
* Process the RPC request.
*/
int
svc_process(struct svc_rqst *rqstp)
{
struct kvec *argv = &rqstp->rq_arg.head[0];
struct kvec *resv = &rqstp->rq_res.head[0];
struct svc_serv *serv = rqstp->rq_server;
u32 dir;
/*
* Setup response xdr_buf.
* Initially it has just one page
*/
rqstp->rq_next_page = &rqstp->rq_respages[1];
resv->iov_base = page_address(rqstp->rq_respages[0]);
resv->iov_len = 0;
rqstp->rq_res.pages = rqstp->rq_respages + 1;
rqstp->rq_res.len = 0;
rqstp->rq_res.page_base = 0;
rqstp->rq_res.page_len = 0;
rqstp->rq_res.buflen = PAGE_SIZE;
rqstp->rq_res.tail[0].iov_base = NULL;
rqstp->rq_res.tail[0].iov_len = 0;
dir = svc_getnl(argv);
if (dir != 0) {
/* direction != CALL */
svc_printk(rqstp, "bad direction %d, dropping request\n", dir);
serv->sv_stats->rpcbadfmt++;
goto out_drop;
}
/* Returns 1 for send, 0 for drop */
if (likely(svc_process_common(rqstp, argv, resv)))
return svc_send(rqstp);
out_drop:
svc_drop(rqstp);
return 0;
}
EXPORT_SYMBOL_GPL(svc_process);
#if defined(CONFIG_SUNRPC_BACKCHANNEL)
/*
* Process a backchannel RPC request that arrived over an existing
* outbound connection
*/
int
bc_svc_process(struct svc_serv *serv, struct rpc_rqst *req,
struct svc_rqst *rqstp)
{
struct kvec *argv = &rqstp->rq_arg.head[0];
struct kvec *resv = &rqstp->rq_res.head[0];
struct rpc_task *task;
int proc_error;
int error;
dprintk("svc: %s(%p)\n", __func__, req);
/* Build the svc_rqst used by the common processing routine */
rqstp->rq_xprt = serv->sv_bc_xprt;
rqstp->rq_xid = req->rq_xid;
rqstp->rq_prot = req->rq_xprt->prot;
rqstp->rq_server = serv;
rqstp->rq_addrlen = sizeof(req->rq_xprt->addr);
memcpy(&rqstp->rq_addr, &req->rq_xprt->addr, rqstp->rq_addrlen);
memcpy(&rqstp->rq_arg, &req->rq_rcv_buf, sizeof(rqstp->rq_arg));
memcpy(&rqstp->rq_res, &req->rq_snd_buf, sizeof(rqstp->rq_res));
/* Adjust the argument buffer length */
rqstp->rq_arg.len = req->rq_private_buf.len;
if (rqstp->rq_arg.len <= rqstp->rq_arg.head[0].iov_len) {
rqstp->rq_arg.head[0].iov_len = rqstp->rq_arg.len;
rqstp->rq_arg.page_len = 0;
} else if (rqstp->rq_arg.len <= rqstp->rq_arg.head[0].iov_len +
rqstp->rq_arg.page_len)
rqstp->rq_arg.page_len = rqstp->rq_arg.len -
rqstp->rq_arg.head[0].iov_len;
else
rqstp->rq_arg.len = rqstp->rq_arg.head[0].iov_len +
rqstp->rq_arg.page_len;
/* reset result send buffer "put" position */
resv->iov_len = 0;
/*
* Skip the next two words because they've already been
* processed in the transport
*/
svc_getu32(argv); /* XID */
svc_getnl(argv); /* CALLDIR */
/* Parse and execute the bc call */
proc_error = svc_process_common(rqstp, argv, resv);
atomic_inc(&req->rq_xprt->bc_free_slots);
if (!proc_error) {
/* Processing error: drop the request */
xprt_free_bc_request(req);
return 0;
}
/* Finally, send the reply synchronously */
memcpy(&req->rq_snd_buf, &rqstp->rq_res, sizeof(req->rq_snd_buf));
task = rpc_run_bc_task(req);
if (IS_ERR(task)) {
error = PTR_ERR(task);
goto out;
}
WARN_ON_ONCE(atomic_read(&task->tk_count) != 1);
error = task->tk_status;
rpc_put_task(task);
out:
dprintk("svc: %s(), error=%d\n", __func__, error);
return error;
}
EXPORT_SYMBOL_GPL(bc_svc_process);
#endif /* CONFIG_SUNRPC_BACKCHANNEL */
/*
* Return (transport-specific) limit on the rpc payload.
*/
u32 svc_max_payload(const struct svc_rqst *rqstp)
{
u32 max = rqstp->rq_xprt->xpt_class->xcl_max_payload;
if (rqstp->rq_server->sv_max_payload < max)
max = rqstp->rq_server->sv_max_payload;
return max;
}
EXPORT_SYMBOL_GPL(svc_max_payload);
NFSD: Clean up legacy NFS WRITE argument XDR decoders Move common code in NFSD's legacy NFS WRITE decoders into a helper. The immediate benefit is reduction of code duplication and some nice micro-optimizations (see below). In the long term, this helper can perform a per-transport call-out to fill the rq_vec (say, using RDMA Reads). The legacy WRITE decoders and procs are changed to work like NFSv4, which constructs the rq_vec just before it is about to call vfs_writev. Why? Calling a transport call-out from the proc instead of the XDR decoder means that the incoming FH can be resolved to a particular filesystem and file. This would allow pages from the backing file to be presented to the transport to be filled, rather than presenting anonymous pages and copying or flipping them into the file's page cache later. I also prefer using the pages in rq_arg.pages, instead of pulling the data pages directly out of the rqstp::rq_pages array. This is currently the way the NFSv3 write decoder works, but the other two do not seem to take this approach. Fixing this removes the only reference to rq_pages found in NFSD, eliminating an NFSD assumption about how transports use the pages in rq_pages. Lastly, avoid setting up the first element of rq_vec as a zero- length buffer. This happens with an RDMA transport when a normal Read chunk is present because the data payload is in rq_arg's page list (none of it is in the head buffer). Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-03-27 22:54:07 +08:00
/**
* svc_fill_write_vector - Construct data argument for VFS write call
* @rqstp: svc_rqst to operate on
* @first: buffer containing first section of write payload
* @total: total number of bytes of write payload
*
* Returns the number of elements populated in the data argument array.
*/
unsigned int svc_fill_write_vector(struct svc_rqst *rqstp, struct kvec *first,
size_t total)
{
struct kvec *vec = rqstp->rq_vec;
struct page **pages;
unsigned int i;
/* Some types of transport can present the write payload
* entirely in rq_arg.pages. In this case, @first is empty.
*/
i = 0;
if (first->iov_len) {
vec[i].iov_base = first->iov_base;
vec[i].iov_len = min_t(size_t, total, first->iov_len);
total -= vec[i].iov_len;
++i;
}
WARN_ON_ONCE(rqstp->rq_arg.page_base != 0);
pages = rqstp->rq_arg.pages;
while (total) {
vec[i].iov_base = page_address(*pages);
vec[i].iov_len = min_t(size_t, total, PAGE_SIZE);
total -= vec[i].iov_len;
++i;
++pages;
}
WARN_ON_ONCE(i > ARRAY_SIZE(rqstp->rq_vec));
return i;
}
EXPORT_SYMBOL_GPL(svc_fill_write_vector);
/**
* svc_fill_symlink_pathname - Construct pathname argument for VFS symlink call
* @rqstp: svc_rqst to operate on
* @first: buffer containing first section of pathname
* @total: total length of the pathname argument
*
* Returns pointer to a NUL-terminated string, or an ERR_PTR. The buffer is
* released automatically when @rqstp is recycled.
*/
char *svc_fill_symlink_pathname(struct svc_rqst *rqstp, struct kvec *first,
size_t total)
{
struct xdr_buf *arg = &rqstp->rq_arg;
struct page **pages;
char *result;
/* VFS API demands a NUL-terminated pathname. This function
* uses a page from @rqstp as the pathname buffer, to enable
* direct placement. Thus the total buffer size is PAGE_SIZE.
* Space in this buffer for NUL-termination requires that we
* cap the size of the returned symlink pathname just a
* little early.
*/
if (total > PAGE_SIZE - 1)
return ERR_PTR(-ENAMETOOLONG);
/* Some types of transport can present the pathname entirely
* in rq_arg.pages. If not, then copy the pathname into one
* page.
*/
pages = arg->pages;
WARN_ON_ONCE(arg->page_base != 0);
if (first->iov_base == 0) {
result = page_address(*pages);
result[total] = '\0';
} else {
size_t len, remaining;
char *dst;
result = page_address(*(rqstp->rq_next_page++));
dst = result;
remaining = total;
len = min_t(size_t, total, first->iov_len);
memcpy(dst, first->iov_base, len);
dst += len;
remaining -= len;
/* No more than one page left */
if (remaining) {
len = min_t(size_t, remaining, PAGE_SIZE);
memcpy(dst, page_address(*pages), len);
dst += len;
}
*dst = '\0';
}
/* Sanity check: we don't allow the pathname argument to
* contain a NUL byte.
*/
if (strlen(result) != total)
return ERR_PTR(-EINVAL);
return result;
}
EXPORT_SYMBOL_GPL(svc_fill_symlink_pathname);