OpenCloudOS-Kernel/drivers/vfio/vfio_iommu_spapr_tce.c

671 lines
16 KiB
C
Raw Normal View History

/*
* VFIO: IOMMU DMA mapping support for TCE on POWER
*
* Copyright (C) 2013 IBM Corp. All rights reserved.
* Author: Alexey Kardashevskiy <aik@ozlabs.ru>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Derived from original vfio_iommu_type1.c:
* Copyright (C) 2012 Red Hat, Inc. All rights reserved.
* Author: Alex Williamson <alex.williamson@redhat.com>
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/err.h>
#include <linux/vfio.h>
#include <asm/iommu.h>
#include <asm/tce.h>
#define DRIVER_VERSION "0.1"
#define DRIVER_AUTHOR "aik@ozlabs.ru"
#define DRIVER_DESC "VFIO IOMMU SPAPR TCE"
static void tce_iommu_detach_group(void *iommu_data,
struct iommu_group *iommu_group);
static long try_increment_locked_vm(long npages)
{
long ret = 0, locked, lock_limit;
if (!current || !current->mm)
return -ESRCH; /* process exited */
if (!npages)
return 0;
down_write(&current->mm->mmap_sem);
locked = current->mm->locked_vm + npages;
lock_limit = rlimit(RLIMIT_MEMLOCK) >> PAGE_SHIFT;
if (locked > lock_limit && !capable(CAP_IPC_LOCK))
ret = -ENOMEM;
else
current->mm->locked_vm += npages;
pr_debug("[%d] RLIMIT_MEMLOCK +%ld %ld/%ld%s\n", current->pid,
npages << PAGE_SHIFT,
current->mm->locked_vm << PAGE_SHIFT,
rlimit(RLIMIT_MEMLOCK),
ret ? " - exceeded" : "");
up_write(&current->mm->mmap_sem);
return ret;
}
static void decrement_locked_vm(long npages)
{
if (!current || !current->mm || !npages)
return; /* process exited */
down_write(&current->mm->mmap_sem);
if (WARN_ON_ONCE(npages > current->mm->locked_vm))
npages = current->mm->locked_vm;
current->mm->locked_vm -= npages;
pr_debug("[%d] RLIMIT_MEMLOCK -%ld %ld/%ld\n", current->pid,
npages << PAGE_SHIFT,
current->mm->locked_vm << PAGE_SHIFT,
rlimit(RLIMIT_MEMLOCK));
up_write(&current->mm->mmap_sem);
}
/*
* VFIO IOMMU fd for SPAPR_TCE IOMMU implementation
*
* This code handles mapping and unmapping of user data buffers
* into DMA'ble space using the IOMMU
*/
/*
* The container descriptor supports only a single group per container.
* Required by the API as the container is not supplied with the IOMMU group
* at the moment of initialization.
*/
struct tce_container {
struct mutex lock;
struct iommu_group *grp;
bool enabled;
unsigned long locked_pages;
};
static bool tce_page_is_contained(struct page *page, unsigned page_shift)
{
/*
* Check that the TCE table granularity is not bigger than the size of
* a page we just found. Otherwise the hardware can get access to
* a bigger memory chunk that it should.
*/
return (PAGE_SHIFT + compound_order(compound_head(page))) >= page_shift;
}
static long tce_iommu_find_table(struct tce_container *container,
phys_addr_t ioba, struct iommu_table **ptbl)
{
long i;
struct iommu_table_group *table_group;
table_group = iommu_group_get_iommudata(container->grp);
if (!table_group)
return -1;
for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) {
struct iommu_table *tbl = table_group->tables[i];
if (tbl) {
unsigned long entry = ioba >> tbl->it_page_shift;
unsigned long start = tbl->it_offset;
unsigned long end = start + tbl->it_size;
if ((start <= entry) && (entry < end)) {
*ptbl = tbl;
return i;
}
}
}
return -1;
}
static int tce_iommu_enable(struct tce_container *container)
{
int ret = 0;
unsigned long locked;
struct iommu_table_group *table_group;
if (!container->grp)
return -ENXIO;
if (!current->mm)
return -ESRCH; /* process exited */
if (container->enabled)
return -EBUSY;
/*
* When userspace pages are mapped into the IOMMU, they are effectively
* locked memory, so, theoretically, we need to update the accounting
* of locked pages on each map and unmap. For powerpc, the map unmap
* paths can be very hot, though, and the accounting would kill
* performance, especially since it would be difficult to impossible
* to handle the accounting in real mode only.
*
* To address that, rather than precisely accounting every page, we
* instead account for a worst case on locked memory when the iommu is
* enabled and disabled. The worst case upper bound on locked memory
* is the size of the whole iommu window, which is usually relatively
* small (compared to total memory sizes) on POWER hardware.
*
* Also we don't have a nice way to fail on H_PUT_TCE due to ulimits,
* that would effectively kill the guest at random points, much better
* enforcing the limit based on the max that the guest can map.
*
* Unfortunately at the moment it counts whole tables, no matter how
* much memory the guest has. I.e. for 4GB guest and 4 IOMMU groups
* each with 2GB DMA window, 8GB will be counted here. The reason for
* this is that we cannot tell here the amount of RAM used by the guest
* as this information is only available from KVM and VFIO is
* KVM agnostic.
*
* So we do not allow enabling a container without a group attached
* as there is no way to know how much we should increment
* the locked_vm counter.
*/
table_group = iommu_group_get_iommudata(container->grp);
if (!table_group)
return -ENODEV;
if (!table_group->tce32_size)
return -EPERM;
locked = table_group->tce32_size >> PAGE_SHIFT;
ret = try_increment_locked_vm(locked);
if (ret)
return ret;
container->locked_pages = locked;
container->enabled = true;
return ret;
}
static void tce_iommu_disable(struct tce_container *container)
{
if (!container->enabled)
return;
container->enabled = false;
if (!current->mm)
return;
decrement_locked_vm(container->locked_pages);
}
static void *tce_iommu_open(unsigned long arg)
{
struct tce_container *container;
if (arg != VFIO_SPAPR_TCE_IOMMU) {
pr_err("tce_vfio: Wrong IOMMU type\n");
return ERR_PTR(-EINVAL);
}
container = kzalloc(sizeof(*container), GFP_KERNEL);
if (!container)
return ERR_PTR(-ENOMEM);
mutex_init(&container->lock);
return container;
}
static void tce_iommu_release(void *iommu_data)
{
struct tce_container *container = iommu_data;
WARN_ON(container->grp);
if (container->grp)
tce_iommu_detach_group(iommu_data, container->grp);
tce_iommu_disable(container);
mutex_destroy(&container->lock);
kfree(container);
}
static void tce_iommu_unuse_page(struct tce_container *container,
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
unsigned long hpa)
{
struct page *page;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
page = pfn_to_page(hpa >> PAGE_SHIFT);
put_page(page);
}
static int tce_iommu_clear(struct tce_container *container,
struct iommu_table *tbl,
unsigned long entry, unsigned long pages)
{
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
unsigned long oldhpa;
long ret;
enum dma_data_direction direction;
for ( ; pages; --pages, ++entry) {
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
direction = DMA_NONE;
oldhpa = 0;
ret = iommu_tce_xchg(tbl, entry, &oldhpa, &direction);
if (ret)
continue;
if (direction == DMA_NONE)
continue;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
tce_iommu_unuse_page(container, oldhpa);
}
return 0;
}
static int tce_iommu_use_page(unsigned long tce, unsigned long *hpa)
{
struct page *page = NULL;
enum dma_data_direction direction = iommu_tce_direction(tce);
if (get_user_pages_fast(tce & PAGE_MASK, 1,
direction != DMA_TO_DEVICE, &page) != 1)
return -EFAULT;
*hpa = __pa((unsigned long) page_address(page));
return 0;
}
static long tce_iommu_build(struct tce_container *container,
struct iommu_table *tbl,
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
unsigned long entry, unsigned long tce, unsigned long pages,
enum dma_data_direction direction)
{
long i, ret = 0;
struct page *page;
unsigned long hpa;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
enum dma_data_direction dirtmp;
for (i = 0; i < pages; ++i) {
unsigned long offset = tce & IOMMU_PAGE_MASK(tbl) & ~PAGE_MASK;
ret = tce_iommu_use_page(tce, &hpa);
if (ret)
break;
page = pfn_to_page(hpa >> PAGE_SHIFT);
if (!tce_page_is_contained(page, tbl->it_page_shift)) {
ret = -EPERM;
break;
}
hpa |= offset;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
dirtmp = direction;
ret = iommu_tce_xchg(tbl, entry + i, &hpa, &dirtmp);
if (ret) {
tce_iommu_unuse_page(container, hpa);
pr_err("iommu_tce: %s failed ioba=%lx, tce=%lx, ret=%ld\n",
__func__, entry << tbl->it_page_shift,
tce, ret);
break;
}
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
if (dirtmp != DMA_NONE)
tce_iommu_unuse_page(container, hpa);
tce += IOMMU_PAGE_SIZE(tbl);
}
if (ret)
tce_iommu_clear(container, tbl, entry, i);
return ret;
}
static long tce_iommu_ioctl(void *iommu_data,
unsigned int cmd, unsigned long arg)
{
struct tce_container *container = iommu_data;
unsigned long minsz;
long ret;
switch (cmd) {
case VFIO_CHECK_EXTENSION:
switch (arg) {
case VFIO_SPAPR_TCE_IOMMU:
ret = 1;
break;
default:
ret = vfio_spapr_iommu_eeh_ioctl(NULL, cmd, arg);
break;
}
return (ret < 0) ? 0 : ret;
case VFIO_IOMMU_SPAPR_TCE_GET_INFO: {
struct vfio_iommu_spapr_tce_info info;
struct iommu_table_group *table_group;
if (WARN_ON(!container->grp))
return -ENXIO;
table_group = iommu_group_get_iommudata(container->grp);
if (!table_group)
return -ENXIO;
minsz = offsetofend(struct vfio_iommu_spapr_tce_info,
dma32_window_size);
if (copy_from_user(&info, (void __user *)arg, minsz))
return -EFAULT;
if (info.argsz < minsz)
return -EINVAL;
info.dma32_window_start = table_group->tce32_start;
info.dma32_window_size = table_group->tce32_size;
info.flags = 0;
if (copy_to_user((void __user *)arg, &info, minsz))
return -EFAULT;
return 0;
}
case VFIO_IOMMU_MAP_DMA: {
struct vfio_iommu_type1_dma_map param;
struct iommu_table *tbl = NULL;
long num;
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
enum dma_data_direction direction;
if (!container->enabled)
return -EPERM;
minsz = offsetofend(struct vfio_iommu_type1_dma_map, size);
if (copy_from_user(&param, (void __user *)arg, minsz))
return -EFAULT;
if (param.argsz < minsz)
return -EINVAL;
if (param.flags & ~(VFIO_DMA_MAP_FLAG_READ |
VFIO_DMA_MAP_FLAG_WRITE))
return -EINVAL;
num = tce_iommu_find_table(container, param.iova, &tbl);
if (num < 0)
return -ENXIO;
if ((param.size & ~IOMMU_PAGE_MASK(tbl)) ||
(param.vaddr & ~IOMMU_PAGE_MASK(tbl)))
return -EINVAL;
/* iova is checked by the IOMMU API */
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
if (param.flags & VFIO_DMA_MAP_FLAG_READ) {
if (param.flags & VFIO_DMA_MAP_FLAG_WRITE)
direction = DMA_BIDIRECTIONAL;
else
direction = DMA_TO_DEVICE;
} else {
if (param.flags & VFIO_DMA_MAP_FLAG_WRITE)
direction = DMA_FROM_DEVICE;
else
return -EINVAL;
}
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
ret = iommu_tce_put_param_check(tbl, param.iova, param.vaddr);
if (ret)
return ret;
ret = tce_iommu_build(container, tbl,
param.iova >> tbl->it_page_shift,
powerpc/iommu/powernv: Release replaced TCE At the moment writing new TCE value to the IOMMU table fails with EBUSY if there is a valid entry already. However PAPR specification allows the guest to write new TCE value without clearing it first. Another problem this patch is addressing is the use of pool locks for external IOMMU users such as VFIO. The pool locks are to protect DMA page allocator rather than entries and since the host kernel does not control what pages are in use, there is no point in pool locks and exchange()+put_page(oldtce) is sufficient to avoid possible races. This adds an exchange() callback to iommu_table_ops which does the same thing as set() plus it returns replaced TCE and DMA direction so the caller can release the pages afterwards. The exchange() receives a physical address unlike set() which receives linear mapping address; and returns a physical address as the clear() does. This implements exchange() for P5IOC2/IODA/IODA2. This adds a requirement for a platform to have exchange() implemented in order to support VFIO. This replaces iommu_tce_build() and iommu_clear_tce() with a single iommu_tce_xchg(). This makes sure that TCE permission bits are not set in TCE passed to IOMMU API as those are to be calculated by platform code from DMA direction. This moves SetPageDirty() to the IOMMU code to make it work for both VFIO ioctl interface in in-kernel TCE acceleration (when it becomes available later). Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:15 +08:00
param.vaddr,
param.size >> tbl->it_page_shift,
direction);
iommu_flush_tce(tbl);
return ret;
}
case VFIO_IOMMU_UNMAP_DMA: {
struct vfio_iommu_type1_dma_unmap param;
struct iommu_table *tbl = NULL;
long num;
if (!container->enabled)
return -EPERM;
minsz = offsetofend(struct vfio_iommu_type1_dma_unmap,
size);
if (copy_from_user(&param, (void __user *)arg, minsz))
return -EFAULT;
if (param.argsz < minsz)
return -EINVAL;
/* No flag is supported now */
if (param.flags)
return -EINVAL;
num = tce_iommu_find_table(container, param.iova, &tbl);
if (num < 0)
return -ENXIO;
if (param.size & ~IOMMU_PAGE_MASK(tbl))
return -EINVAL;
ret = iommu_tce_clear_param_check(tbl, param.iova, 0,
param.size >> tbl->it_page_shift);
if (ret)
return ret;
ret = tce_iommu_clear(container, tbl,
param.iova >> tbl->it_page_shift,
param.size >> tbl->it_page_shift);
iommu_flush_tce(tbl);
return ret;
}
case VFIO_IOMMU_ENABLE:
mutex_lock(&container->lock);
ret = tce_iommu_enable(container);
mutex_unlock(&container->lock);
return ret;
case VFIO_IOMMU_DISABLE:
mutex_lock(&container->lock);
tce_iommu_disable(container);
mutex_unlock(&container->lock);
return 0;
case VFIO_EEH_PE_OP:
if (!container->grp)
return -ENODEV;
return vfio_spapr_iommu_eeh_ioctl(container->grp,
cmd, arg);
}
return -ENOTTY;
}
vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership control This adds tce_iommu_take_ownership() and tce_iommu_release_ownership which call in a loop iommu_take_ownership()/iommu_release_ownership() for every table on the group. As there is just one now, no change in behaviour is expected. At the moment the iommu_table struct has a set_bypass() which enables/ disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code which calls this callback when external IOMMU users such as VFIO are about to get over a PHB. The set_bypass() callback is not really an iommu_table function but IOMMU/PE function. This introduces a iommu_table_group_ops struct and adds take_ownership()/release_ownership() callbacks to it which are called when an external user takes/releases control over the IOMMU. This replaces set_bypass() with ownership callbacks as it is not necessarily just bypass enabling, it can be something else/more so let's give it more generic name. The callbacks is implemented for IODA2 only. Other platforms (P5IOC2, IODA1) will use the old iommu_take_ownership/iommu_release_ownership API. The following patches will replace iommu_take_ownership/ iommu_release_ownership calls in IODA2 with full IOMMU table release/ create. As we here and touching bypass control, this removes pnv_pci_ioda2_setup_bypass_pe() as it does not do much more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base initialization to pnv_pci_ioda2_setup_dma_pe. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:10 +08:00
static void tce_iommu_release_ownership(struct tce_container *container,
struct iommu_table_group *table_group)
{
int i;
for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) {
struct iommu_table *tbl = table_group->tables[i];
if (!tbl)
continue;
tce_iommu_clear(container, tbl, tbl->it_offset, tbl->it_size);
if (tbl->it_map)
iommu_release_ownership(tbl);
}
}
static int tce_iommu_take_ownership(struct tce_container *container,
struct iommu_table_group *table_group)
{
int i, j, rc = 0;
for (i = 0; i < IOMMU_TABLE_GROUP_MAX_TABLES; ++i) {
struct iommu_table *tbl = table_group->tables[i];
if (!tbl || !tbl->it_map)
continue;
rc = iommu_take_ownership(tbl);
if (rc) {
for (j = 0; j < i; ++j)
iommu_release_ownership(
table_group->tables[j]);
return rc;
}
}
return 0;
}
static void tce_iommu_release_ownership_ddw(struct tce_container *container,
struct iommu_table_group *table_group)
{
table_group->ops->release_ownership(table_group);
}
static long tce_iommu_take_ownership_ddw(struct tce_container *container,
struct iommu_table_group *table_group)
{
table_group->ops->take_ownership(table_group);
return 0;
}
static int tce_iommu_attach_group(void *iommu_data,
struct iommu_group *iommu_group)
{
int ret;
struct tce_container *container = iommu_data;
struct iommu_table_group *table_group;
mutex_lock(&container->lock);
/* pr_debug("tce_vfio: Attaching group #%u to iommu %p\n",
iommu_group_id(iommu_group), iommu_group); */
if (container->grp) {
pr_warn("tce_vfio: Only one group per IOMMU container is allowed, existing id=%d, attaching id=%d\n",
iommu_group_id(container->grp),
iommu_group_id(iommu_group));
ret = -EBUSY;
goto unlock_exit;
}
if (container->enabled) {
pr_err("tce_vfio: attaching group #%u to enabled container\n",
iommu_group_id(iommu_group));
ret = -EBUSY;
goto unlock_exit;
}
table_group = iommu_group_get_iommudata(iommu_group);
if (!table_group) {
ret = -ENXIO;
goto unlock_exit;
}
vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership control This adds tce_iommu_take_ownership() and tce_iommu_release_ownership which call in a loop iommu_take_ownership()/iommu_release_ownership() for every table on the group. As there is just one now, no change in behaviour is expected. At the moment the iommu_table struct has a set_bypass() which enables/ disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code which calls this callback when external IOMMU users such as VFIO are about to get over a PHB. The set_bypass() callback is not really an iommu_table function but IOMMU/PE function. This introduces a iommu_table_group_ops struct and adds take_ownership()/release_ownership() callbacks to it which are called when an external user takes/releases control over the IOMMU. This replaces set_bypass() with ownership callbacks as it is not necessarily just bypass enabling, it can be something else/more so let's give it more generic name. The callbacks is implemented for IODA2 only. Other platforms (P5IOC2, IODA1) will use the old iommu_take_ownership/iommu_release_ownership API. The following patches will replace iommu_take_ownership/ iommu_release_ownership calls in IODA2 with full IOMMU table release/ create. As we here and touching bypass control, this removes pnv_pci_ioda2_setup_bypass_pe() as it does not do much more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base initialization to pnv_pci_ioda2_setup_dma_pe. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:10 +08:00
if (!table_group->ops || !table_group->ops->take_ownership ||
!table_group->ops->release_ownership)
ret = tce_iommu_take_ownership(container, table_group);
else
ret = tce_iommu_take_ownership_ddw(container, table_group);
if (!ret)
container->grp = iommu_group;
unlock_exit:
mutex_unlock(&container->lock);
return ret;
}
static void tce_iommu_detach_group(void *iommu_data,
struct iommu_group *iommu_group)
{
struct tce_container *container = iommu_data;
struct iommu_table_group *table_group;
mutex_lock(&container->lock);
if (iommu_group != container->grp) {
pr_warn("tce_vfio: detaching group #%u, expected group is #%u\n",
iommu_group_id(iommu_group),
iommu_group_id(container->grp));
goto unlock_exit;
}
if (container->enabled) {
pr_warn("tce_vfio: detaching group #%u from enabled container, forcing disable\n",
iommu_group_id(container->grp));
tce_iommu_disable(container);
}
/* pr_debug("tce_vfio: detaching group #%u from iommu %p\n",
iommu_group_id(iommu_group), iommu_group); */
container->grp = NULL;
table_group = iommu_group_get_iommudata(iommu_group);
BUG_ON(!table_group);
vfio: powerpc/spapr/iommu/powernv/ioda2: Rework IOMMU ownership control This adds tce_iommu_take_ownership() and tce_iommu_release_ownership which call in a loop iommu_take_ownership()/iommu_release_ownership() for every table on the group. As there is just one now, no change in behaviour is expected. At the moment the iommu_table struct has a set_bypass() which enables/ disables DMA bypass on IODA2 PHB. This is exposed to POWERPC IOMMU code which calls this callback when external IOMMU users such as VFIO are about to get over a PHB. The set_bypass() callback is not really an iommu_table function but IOMMU/PE function. This introduces a iommu_table_group_ops struct and adds take_ownership()/release_ownership() callbacks to it which are called when an external user takes/releases control over the IOMMU. This replaces set_bypass() with ownership callbacks as it is not necessarily just bypass enabling, it can be something else/more so let's give it more generic name. The callbacks is implemented for IODA2 only. Other platforms (P5IOC2, IODA1) will use the old iommu_take_ownership/iommu_release_ownership API. The following patches will replace iommu_take_ownership/ iommu_release_ownership calls in IODA2 with full IOMMU table release/ create. As we here and touching bypass control, this removes pnv_pci_ioda2_setup_bypass_pe() as it does not do much more compared to pnv_pci_ioda2_set_bypass. This moves tce_bypass_base initialization to pnv_pci_ioda2_setup_dma_pe. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [aw: for the vfio related changes] Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-06-05 14:35:10 +08:00
if (!table_group->ops || !table_group->ops->release_ownership)
tce_iommu_release_ownership(container, table_group);
else
tce_iommu_release_ownership_ddw(container, table_group);
unlock_exit:
mutex_unlock(&container->lock);
}
const struct vfio_iommu_driver_ops tce_iommu_driver_ops = {
.name = "iommu-vfio-powerpc",
.owner = THIS_MODULE,
.open = tce_iommu_open,
.release = tce_iommu_release,
.ioctl = tce_iommu_ioctl,
.attach_group = tce_iommu_attach_group,
.detach_group = tce_iommu_detach_group,
};
static int __init tce_iommu_init(void)
{
return vfio_register_iommu_driver(&tce_iommu_driver_ops);
}
static void __exit tce_iommu_cleanup(void)
{
vfio_unregister_iommu_driver(&tce_iommu_driver_ops);
}
module_init(tce_iommu_init);
module_exit(tce_iommu_cleanup);
MODULE_VERSION(DRIVER_VERSION);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);