UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/sound/soc/codecs/rt5645.c

4298 lines
128 KiB
C
Raw Permalink Normal View History

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04 16:11:33 +08:00
// SPDX-License-Identifier: GPL-2.0-only
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
/*
* rt5645.c -- RT5645 ALSA SoC audio codec driver
*
* Copyright 2013 Realtek Semiconductor Corp.
* Author: Bard Liao <bardliao@realtek.com>
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
ASoC: rt5645: fixed kbuild err kbuild robot reports following error/warnings sound/soc/codecs/rt5645.c: In function 'rt5645_i2c_probe': >> sound/soc/codecs/rt5645.c:2720:4: error: implicit declaration of >> function 'devm_gpiod_get_index' >> [-Werror=implicit-function-declaration] gpiod = devm_gpiod_get_index(&i2c->dev, "rt5645", 0); ^ >> sound/soc/codecs/rt5645.c:2720:10: warning: assignment makes pointer >> from integer without a cast gpiod = devm_gpiod_get_index(&i2c->dev, "rt5645", 0); ^ >> sound/soc/codecs/rt5645.c:2722:4: error: implicit declaration of >> function 'gpiod_direction_input' >> [-Werror=implicit-function-declaration] if (IS_ERR(gpiod) || gpiod_direction_input(gpiod)) { ^ >> sound/soc/codecs/rt5645.c:2726:5: error: implicit declaration of >> function 'desc_to_gpio' [-Werror=implicit-function-declaration] rt5645->pdata.hp_det_gpio = desc_to_gpio(gpiod); ^ >> sound/soc/codecs/rt5645.c:2728:7: error: implicit declaration of >> function 'gpiod_is_active_low' >> [-Werror=implicit-function-declaration] = !gpiod_is_active_low(gpiod); ^ cc1: some warnings being treated as errors Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 06:54:30 +08:00
#include <linux/gpio/consumer.h>
ASoC: rt5645: Add ACPI match ID This patch adds the ACPI match ID for rt5645/5650 codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-24 07:35:17 +08:00
#include <linux/acpi.h>
ASoC: rt5645: set platform data base on DMI set platform specific data for intel strago platform Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-25 08:50:54 +08:00
#include <linux/dmi.h>
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
#include <linux/regulator/consumer.h>
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/jack.h>
#include <sound/soc.h>
#include <sound/soc-dapm.h>
#include <sound/initval.h>
#include <sound/tlv.h>
ASoC: rt5640: Add RL6231 class device shared support for RT5640, RT5645 and RT5651 The patch adds the RL6231 class device shared support for RT5640, RT5645 and RT5651. The function of the DMIC clock calculation can be shared by RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-20 15:01:53 +08:00
#include "rl6231.h"
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
#include "rt5645.h"
ASoC: rt5645: Add quirk override by module option For making the development easier, add quirk module option to override the platform data setup. For example, a platform with inverted jack detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 = jd_mode=2). It overrides the whole pdata fields, so pass it carefully. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: James Cameron <quozl@laptop.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-30 00:08:33 +08:00
#define QUIRK_INV_JD1_1(q) ((q) & 1)
#define QUIRK_LEVEL_IRQ(q) (((q) >> 1) & 1)
#define QUIRK_IN2_DIFF(q) (((q) >> 2) & 1)
ASoC: rt5645: add inv_hp_det flag The ECS EF20EA laptop use gpio for jack detection instead of rt5645 rt5645 JD. However, the GPIO polarity is inverse for hp-detect based on the _DSD property of the RTK2 device. Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"hp-detect-gpio", Package() {^RTK2, 0, 0, 1 }}, } }) This flag will invert the hp-detect gpio polarity. Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20210111054141.4668-4-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-11 13:41:40 +08:00
#define QUIRK_INV_HP_POL(q) (((q) >> 3) & 1)
ASoC: rt5645: Add quirk override by module option For making the development easier, add quirk module option to override the platform data setup. For example, a platform with inverted jack detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 = jd_mode=2). It overrides the whole pdata fields, so pass it carefully. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: James Cameron <quozl@laptop.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-30 00:08:33 +08:00
#define QUIRK_JD_MODE(q) (((q) >> 4) & 7)
#define QUIRK_DMIC1_DATA_PIN(q) (((q) >> 8) & 3)
#define QUIRK_DMIC2_DATA_PIN(q) (((q) >> 12) & 3)
static unsigned int quirk = -1;
module_param(quirk, uint, 0444);
MODULE_PARM_DESC(quirk, "RT5645 pdata quirk override");
ASoC: rt5645: Introduce mapping for ACPI-defined GPIO On at least one laptop (ECS EF20EA) the 'hp-detect' GPIO is defined in the DSDT table by the ACPI GpioIo resources in _CRS. The GPIO related information should be mapped to the rt5645 driver to enable the jack detection also on non-DT platforms. Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20210111054141.4668-2-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-11 13:41:38 +08:00
static const struct acpi_gpio_mapping *cht_rt5645_gpios;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
#define RT5645_DEVICE_ID 0x6308
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
#define RT5650_DEVICE_ID 0x6419
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
#define RT5645_PR_RANGE_BASE (0xff + 1)
#define RT5645_PR_SPACING 0x100
#define RT5645_PR_BASE (RT5645_PR_RANGE_BASE + (0 * RT5645_PR_SPACING))
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
#define RT5645_HWEQ_NUM 57
ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2 Minimum time required between power On of codec and read of RT5645_VENDOR_ID2 is 400msec. We should wait that long before reading the value. TEST=Cold boot the device and check for sound device. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10 01:35:51 +08:00
#define TIME_TO_POWER_MS 400
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
static const struct regmap_range_cfg rt5645_ranges[] = {
{
.name = "PR",
.range_min = RT5645_PR_BASE,
.range_max = RT5645_PR_BASE + 0xf8,
.selector_reg = RT5645_PRIV_INDEX,
.selector_mask = 0xff,
.selector_shift = 0x0,
.window_start = RT5645_PRIV_DATA,
.window_len = 0x1,
},
};
regmap: Use reg_sequence for multi_reg_write / register_patch Separate the functionality using sequences of register writes from the functions that take register defaults. This change renames the arguments in order to support the extension of reg_sequence to take an optional delay to be applied after any given register in a sequence is written. This avoids adding an int to all register defaults, which could substantially increase memory usage for regmaps with large default tables. This also updates all the clients of multi_reg_write/register_patch. Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16 23:36:21 +08:00
static const struct reg_sequence init_list[] = {
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{RT5645_PR_BASE + 0x3d, 0x3600},
ASoC: rt5645: enable speaker protection features This patch is uploaded for enabling the speaker protection features of the audio codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-27 10:05:29 +08:00
{RT5645_PR_BASE + 0x1c, 0xfd70},
ASoC: rt5645: Move settings from probe() to reg_default struct The patch moves the private register settings from probe() to reg_default struct. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08 14:47:36 +08:00
{RT5645_PR_BASE + 0x20, 0x611f},
{RT5645_PR_BASE + 0x21, 0x4040},
{RT5645_PR_BASE + 0x23, 0x0004},
ASoC: rt5645: patch reg-0x8a reg-8a assign the tracking source for each ASRC tracker. The default value is 0x0000 which means all ASRC trackers will track LRCK1. But in most cases, we wish each ASRC tracker track the corresponding LRCK. i.e. ASRC1 tracks LRCK1, ASRC2 tracks LRCK2 and so on. So, we rewrite reg-8a as 0x0120. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-01 09:49:06 +08:00
{RT5645_ASRC_4, 0x0120},
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
};
regmap: Use reg_sequence for multi_reg_write / register_patch Separate the functionality using sequences of register writes from the functions that take register defaults. This change renames the arguments in order to support the extension of reg_sequence to take an optional delay to be applied after any given register in a sequence is written. This avoids adding an int to all register defaults, which could substantially increase memory usage for regmaps with large default tables. This also updates all the clients of multi_reg_write/register_patch. Signed-off-by: Nariman Poushin <nariman@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16 23:36:21 +08:00
static const struct reg_sequence rt5650_init_list[] = {
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
{0xf6, 0x0100},
ASoC: rt5645: improve the depop sequences of CBJ detection This patch will improve the depop function of CBJ detection before the headphone playback when the system resumes. We also want to complete the CBJ detection in the system-level resume function. It could avoid triggering the detection at the playing state of headphones. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18 10:37:32 +08:00
{RT5645_PWR_ANLG1, 0x02},
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
};
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
static const struct reg_default rt5645_reg[] = {
{ 0x00, 0x0000 },
{ 0x01, 0xc8c8 },
{ 0x02, 0xc8c8 },
{ 0x03, 0xc8c8 },
{ 0x0a, 0x0002 },
{ 0x0b, 0x2827 },
{ 0x0c, 0xe000 },
{ 0x0d, 0x0000 },
{ 0x0e, 0x0000 },
{ 0x0f, 0x0808 },
{ 0x14, 0x3333 },
{ 0x16, 0x4b00 },
{ 0x18, 0x018b },
{ 0x19, 0xafaf },
{ 0x1a, 0xafaf },
{ 0x1b, 0x0001 },
{ 0x1c, 0x2f2f },
{ 0x1d, 0x2f2f },
{ 0x1e, 0x0000 },
{ 0x20, 0x0000 },
{ 0x27, 0x7060 },
{ 0x28, 0x7070 },
{ 0x29, 0x8080 },
{ 0x2a, 0x5656 },
{ 0x2b, 0x5454 },
{ 0x2c, 0xaaa0 },
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
{ 0x2d, 0x0000 },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ 0x2f, 0x1002 },
{ 0x31, 0x5000 },
{ 0x32, 0x0000 },
{ 0x33, 0x0000 },
{ 0x34, 0x0000 },
{ 0x35, 0x0000 },
{ 0x3b, 0x0000 },
{ 0x3c, 0x007f },
{ 0x3d, 0x0000 },
{ 0x3e, 0x007f },
{ 0x3f, 0x0000 },
{ 0x40, 0x001f },
{ 0x41, 0x0000 },
{ 0x42, 0x001f },
{ 0x45, 0x6000 },
{ 0x46, 0x003e },
{ 0x47, 0x003e },
{ 0x48, 0xf807 },
{ 0x4a, 0x0004 },
{ 0x4d, 0x0000 },
{ 0x4e, 0x0000 },
{ 0x4f, 0x01ff },
{ 0x50, 0x0000 },
{ 0x51, 0x0000 },
{ 0x52, 0x01ff },
{ 0x53, 0xf000 },
{ 0x56, 0x0111 },
{ 0x57, 0x0064 },
{ 0x58, 0xef0e },
{ 0x59, 0xf0f0 },
{ 0x5a, 0xef0e },
{ 0x5b, 0xf0f0 },
{ 0x5c, 0xef0e },
{ 0x5d, 0xf0f0 },
{ 0x5e, 0xf000 },
{ 0x5f, 0x0000 },
{ 0x61, 0x0300 },
{ 0x62, 0x0000 },
{ 0x63, 0x00c2 },
{ 0x64, 0x0000 },
{ 0x65, 0x0000 },
{ 0x66, 0x0000 },
{ 0x6a, 0x0000 },
{ 0x6c, 0x0aaa },
{ 0x70, 0x8000 },
{ 0x71, 0x8000 },
{ 0x72, 0x8000 },
{ 0x73, 0x7770 },
{ 0x74, 0x3e00 },
{ 0x75, 0x2409 },
{ 0x76, 0x000a },
{ 0x77, 0x0c00 },
{ 0x78, 0x0000 },
ASoC: rt5645: Mark RT5645_TDM_CTRL_3 as readable amixer query fails due to it is not readable reigster Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Acked-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29 05:36:36 +08:00
{ 0x79, 0x0123 },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ 0x80, 0x0000 },
{ 0x81, 0x0000 },
{ 0x82, 0x0000 },
{ 0x83, 0x0000 },
{ 0x84, 0x0000 },
{ 0x85, 0x0000 },
ASoC: rt5645: patch reg-0x8a reg-8a assign the tracking source for each ASRC tracker. The default value is 0x0000 which means all ASRC trackers will track LRCK1. But in most cases, we wish each ASRC tracker track the corresponding LRCK. i.e. ASRC1 tracks LRCK1, ASRC2 tracks LRCK2 and so on. So, we rewrite reg-8a as 0x0120. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-01 09:49:06 +08:00
{ 0x8a, 0x0120 },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ 0x8e, 0x0004 },
{ 0x8f, 0x1100 },
{ 0x90, 0x0646 },
{ 0x91, 0x0c06 },
{ 0x93, 0x0000 },
{ 0x94, 0x0200 },
{ 0x95, 0x0000 },
{ 0x9a, 0x2184 },
{ 0x9b, 0x010a },
{ 0x9c, 0x0aea },
{ 0x9d, 0x000c },
{ 0x9e, 0x0400 },
{ 0xa0, 0xa0a8 },
{ 0xa1, 0x0059 },
{ 0xa2, 0x0001 },
{ 0xae, 0x6000 },
{ 0xaf, 0x0000 },
{ 0xb0, 0x6000 },
{ 0xb1, 0x0000 },
{ 0xb2, 0x0000 },
{ 0xb3, 0x001f },
{ 0xb4, 0x020c },
{ 0xb5, 0x1f00 },
{ 0xb6, 0x0000 },
{ 0xbb, 0x0000 },
{ 0xbc, 0x0000 },
{ 0xbd, 0x0000 },
{ 0xbe, 0x0000 },
{ 0xbf, 0x3100 },
{ 0xc0, 0x0000 },
{ 0xc1, 0x0000 },
{ 0xc2, 0x0000 },
{ 0xc3, 0x2000 },
{ 0xcd, 0x0000 },
{ 0xce, 0x0000 },
{ 0xcf, 0x1813 },
{ 0xd0, 0x0690 },
{ 0xd1, 0x1c17 },
{ 0xd3, 0xb320 },
{ 0xd4, 0x0000 },
{ 0xd6, 0x0400 },
{ 0xd9, 0x0809 },
{ 0xda, 0x0000 },
{ 0xdb, 0x0003 },
{ 0xdc, 0x0049 },
{ 0xdd, 0x001b },
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
{ 0xdf, 0x0008 },
{ 0xe0, 0x4000 },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ 0xe6, 0x8000 },
{ 0xe7, 0x0200 },
{ 0xec, 0xb300 },
{ 0xed, 0x0000 },
{ 0xf0, 0x001f },
{ 0xf1, 0x020c },
{ 0xf2, 0x1f00 },
{ 0xf3, 0x0000 },
{ 0xf4, 0x4000 },
{ 0xf8, 0x0000 },
{ 0xf9, 0x0000 },
{ 0xfa, 0x2060 },
{ 0xfb, 0x4040 },
{ 0xfc, 0x0000 },
{ 0xfd, 0x0002 },
{ 0xfe, 0x10ec },
{ 0xff, 0x6308 },
};
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
static const struct reg_default rt5650_reg[] = {
{ 0x00, 0x0000 },
{ 0x01, 0xc8c8 },
{ 0x02, 0xc8c8 },
{ 0x03, 0xc8c8 },
{ 0x0a, 0x0002 },
{ 0x0b, 0x2827 },
{ 0x0c, 0xe000 },
{ 0x0d, 0x0000 },
{ 0x0e, 0x0000 },
{ 0x0f, 0x0808 },
{ 0x14, 0x3333 },
{ 0x16, 0x4b00 },
{ 0x18, 0x018b },
{ 0x19, 0xafaf },
{ 0x1a, 0xafaf },
{ 0x1b, 0x0001 },
{ 0x1c, 0x2f2f },
{ 0x1d, 0x2f2f },
{ 0x1e, 0x0000 },
{ 0x20, 0x0000 },
{ 0x27, 0x7060 },
{ 0x28, 0x7070 },
{ 0x29, 0x8080 },
{ 0x2a, 0x5656 },
{ 0x2b, 0x5454 },
{ 0x2c, 0xaaa0 },
{ 0x2d, 0x0000 },
ASoC: rt5645: fix reg-2f default value. The default value of reg-2f in codec rt5650 is 0x5002, not 0x1002. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-01 09:49:05 +08:00
{ 0x2f, 0x5002 },
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
{ 0x31, 0x5000 },
{ 0x32, 0x0000 },
{ 0x33, 0x0000 },
{ 0x34, 0x0000 },
{ 0x35, 0x0000 },
{ 0x3b, 0x0000 },
{ 0x3c, 0x007f },
{ 0x3d, 0x0000 },
{ 0x3e, 0x007f },
{ 0x3f, 0x0000 },
{ 0x40, 0x001f },
{ 0x41, 0x0000 },
{ 0x42, 0x001f },
{ 0x45, 0x6000 },
{ 0x46, 0x003e },
{ 0x47, 0x003e },
{ 0x48, 0xf807 },
{ 0x4a, 0x0004 },
{ 0x4d, 0x0000 },
{ 0x4e, 0x0000 },
{ 0x4f, 0x01ff },
{ 0x50, 0x0000 },
{ 0x51, 0x0000 },
{ 0x52, 0x01ff },
{ 0x53, 0xf000 },
{ 0x56, 0x0111 },
{ 0x57, 0x0064 },
{ 0x58, 0xef0e },
{ 0x59, 0xf0f0 },
{ 0x5a, 0xef0e },
{ 0x5b, 0xf0f0 },
{ 0x5c, 0xef0e },
{ 0x5d, 0xf0f0 },
{ 0x5e, 0xf000 },
{ 0x5f, 0x0000 },
{ 0x61, 0x0300 },
{ 0x62, 0x0000 },
{ 0x63, 0x00c2 },
{ 0x64, 0x0000 },
{ 0x65, 0x0000 },
{ 0x66, 0x0000 },
{ 0x6a, 0x0000 },
{ 0x6c, 0x0aaa },
{ 0x70, 0x8000 },
{ 0x71, 0x8000 },
{ 0x72, 0x8000 },
{ 0x73, 0x7770 },
{ 0x74, 0x3e00 },
{ 0x75, 0x2409 },
{ 0x76, 0x000a },
{ 0x77, 0x0c00 },
{ 0x78, 0x0000 },
{ 0x79, 0x0123 },
{ 0x7a, 0x0123 },
{ 0x80, 0x0000 },
{ 0x81, 0x0000 },
{ 0x82, 0x0000 },
{ 0x83, 0x0000 },
{ 0x84, 0x0000 },
{ 0x85, 0x0000 },
ASoC: rt5645: patch reg-0x8a reg-8a assign the tracking source for each ASRC tracker. The default value is 0x0000 which means all ASRC trackers will track LRCK1. But in most cases, we wish each ASRC tracker track the corresponding LRCK. i.e. ASRC1 tracks LRCK1, ASRC2 tracks LRCK2 and so on. So, we rewrite reg-8a as 0x0120. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-01 09:49:06 +08:00
{ 0x8a, 0x0120 },
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
{ 0x8e, 0x0004 },
{ 0x8f, 0x1100 },
{ 0x90, 0x0646 },
{ 0x91, 0x0c06 },
{ 0x93, 0x0000 },
{ 0x94, 0x0200 },
{ 0x95, 0x0000 },
{ 0x9a, 0x2184 },
{ 0x9b, 0x010a },
{ 0x9c, 0x0aea },
{ 0x9d, 0x000c },
{ 0x9e, 0x0400 },
{ 0xa0, 0xa0a8 },
{ 0xa1, 0x0059 },
{ 0xa2, 0x0001 },
{ 0xae, 0x6000 },
{ 0xaf, 0x0000 },
{ 0xb0, 0x6000 },
{ 0xb1, 0x0000 },
{ 0xb2, 0x0000 },
{ 0xb3, 0x001f },
{ 0xb4, 0x020c },
{ 0xb5, 0x1f00 },
{ 0xb6, 0x0000 },
{ 0xbb, 0x0000 },
{ 0xbc, 0x0000 },
{ 0xbd, 0x0000 },
{ 0xbe, 0x0000 },
{ 0xbf, 0x3100 },
{ 0xc0, 0x0000 },
{ 0xc1, 0x0000 },
{ 0xc2, 0x0000 },
{ 0xc3, 0x2000 },
{ 0xcd, 0x0000 },
{ 0xce, 0x0000 },
{ 0xcf, 0x1813 },
{ 0xd0, 0x0690 },
{ 0xd1, 0x1c17 },
{ 0xd3, 0xb320 },
{ 0xd4, 0x0000 },
{ 0xd6, 0x0400 },
{ 0xd9, 0x0809 },
{ 0xda, 0x0000 },
{ 0xdb, 0x0003 },
{ 0xdc, 0x0049 },
{ 0xdd, 0x001b },
{ 0xdf, 0x0008 },
{ 0xe0, 0x4000 },
{ 0xe6, 0x8000 },
{ 0xe7, 0x0200 },
{ 0xec, 0xb300 },
{ 0xed, 0x0000 },
{ 0xf0, 0x001f },
{ 0xf1, 0x020c },
{ 0xf2, 0x1f00 },
{ 0xf3, 0x0000 },
{ 0xf4, 0x4000 },
{ 0xf8, 0x0000 },
{ 0xf9, 0x0000 },
{ 0xfa, 0x2060 },
{ 0xfb, 0x4040 },
{ 0xfc, 0x0000 },
{ 0xfd, 0x0002 },
{ 0xfe, 0x10ec },
{ 0xff, 0x6308 },
};
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
struct rt5645_eq_param_s {
unsigned short reg;
unsigned short val;
};
ASoC: rt5645: store eq kcontrol byte in __be The eq parameters binary is stored in __be. However, it is unsigned short in rt5645_eq_param_s{} which will cause incorrect type assignment. So add struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to unsigned short in rt5645->eq_param. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-05 10:02:48 +08:00
struct rt5645_eq_param_s_be16 {
__be16 reg;
__be16 val;
};
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
static const char *const rt5645_supply_names[] = {
"avdd",
"cpvdd",
};
ASoC: rt5645: Move rt5645_platform_data to sound/soc/codecs/rt5645.c sound/soc/codecs/rt5645.c is the only user of the rt5645_platform_data, move its definition to sound/soc/codecs/rt5645.c and remove the now empty include/sound/rt5645.h file. Note since the DMI quirk mechanism uses pointers to the rt5645_platform_data struct we can NOT simply add its members to the rt5645_priv struct and completely remove the struct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210306230223.516566-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-07 07:02:22 +08:00
struct rt5645_platform_data {
/* IN2 can optionally be differential */
bool in2_diff;
unsigned int dmic1_data_pin;
/* 0 = IN2N; 1 = GPIO5; 2 = GPIO11 */
unsigned int dmic2_data_pin;
/* 0 = IN2P; 1 = GPIO6; 2 = GPIO10; 3 = GPIO12 */
unsigned int jd_mode;
/* Use level triggered irq */
bool level_trigger_irq;
/* Invert JD1_1 status polarity */
bool inv_jd1_1;
/* Invert HP detect status polarity */
bool inv_hp_pol;
/* Value to assign to snd_soc_card.long_name */
const char *long_name;
ASoC: rt5645: The ALC3270 variant does not have a headset-mic pin The Asus T100HA and T101HA 2-in-1s use a rt5645 family codec and always report that a headset (rather then headphones) are plugged in even when regular headphones are plugged in. And when a headset is used, then the headset-microphone does not work. According to RealTek the ALC3270 variant used in these devices does not support headsets only headphones. Since the ALC3270 is a budget version of the regular ALC5645 codec, I assume that it is using a package with less pins and the headset-mic pin is simply not connected. Detect if the codec is an ALC3270 based on the ACPI HID and if it is an ALC3270 then always report SND_JACK_MICROPHONE as false, so that userspace will not try to use the not-connected headset-mic. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210306230223.516566-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-07 07:02:23 +08:00
/* Some (package) variants have the headset-mic pin not-connected */
bool no_headset_mic;
ASoC: rt5645: Move rt5645_platform_data to sound/soc/codecs/rt5645.c sound/soc/codecs/rt5645.c is the only user of the rt5645_platform_data, move its definition to sound/soc/codecs/rt5645.c and remove the now empty include/sound/rt5645.h file. Note since the DMI quirk mechanism uses pointers to the rt5645_platform_data struct we can NOT simply add its members to the rt5645_priv struct and completely remove the struct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210306230223.516566-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-07 07:02:22 +08:00
};
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
struct rt5645_priv {
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component;
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
struct rt5645_platform_data pdata;
struct regmap *regmap;
struct i2c_client *i2c;
struct gpio_desc *gpiod_hp_det;
ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating [ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ] The codec leaves tie combo jack's sleeve/ring2 to floating status default. It would cause electric noise while connecting the active speaker jack during boot or shutdown. This patch requests a gpio to control the additional jack circuit to tie the contacts to the ground or floating. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-08 17:10:56 +08:00
struct gpio_desc *gpiod_cbj_sleeve;
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
struct snd_soc_jack *hp_jack;
struct snd_soc_jack *mic_jack;
struct snd_soc_jack *btn_jack;
ASoC: rt5645: Power up the RC clock to make sure the speaker volume adjust properly Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-05 19:55:51 +08:00
struct delayed_work jack_detect_work, rcclock_work;
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
struct regulator_bulk_data supplies[ARRAY_SIZE(rt5645_supply_names)];
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
struct rt5645_eq_param_s *eq_param;
ASoC: rt5645: use polling to support HS button The IRQ pin will keep high when the headset button is pressed. And keep low when the headset button is released. So, we need irq trigger at both edges. However, some platform can't support it. Therefore, we polling the register to report the button release event once a button presse event is received. To support the headset button detection function for those can't support both edges trigger platforms, we also need to invert the polarity of jack detection irq since we need to keep the IRQ pin low in normal case. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:20 +08:00
struct timer_list btn_check_timer;
ASoC: rt5650: add mutex to avoid the jack detection failure [ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ] This patch adds the jd_mutex to protect the jack detection control flow. And only the headset type could check the button status. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-22 18:01:23 +08:00
struct mutex jd_mutex;
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
int codec_type;
int sysclk;
int sysclk_src;
int lrck[RT5645_AIFS];
int bclk[RT5645_AIFS];
int master[RT5645_AIFS];
int pll_src;
int pll_in;
int pll_out;
int jack_type;
bool en_button_func;
ASoC: rt5645: remove unexisting route on new rt5645 "SPOL MIX DAC R1 Switch" and "SPOL MIX SPKVOL R Switch" are only exist in the early version of rt5645. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-30 15:26:05 +08:00
int v_id;
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
};
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static int rt5645_reset(struct snd_soc_component *component)
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
return snd_soc_component_write(component, RT5645_RESET, 0);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
}
static bool rt5645_volatile_register(struct device *dev, unsigned int reg)
{
int i;
for (i = 0; i < ARRAY_SIZE(rt5645_ranges); i++) {
if (reg >= rt5645_ranges[i].range_min &&
reg <= rt5645_ranges[i].range_max) {
return true;
}
}
switch (reg) {
case RT5645_RESET:
ASoC: rt5645: set RT5645_PRIV_INDEX as volatile RT5645_PRIV_INDEX(0x6a) indicate the address of PR- registers. So, it should be volatile. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-06 09:55:14 +08:00
case RT5645_PRIV_INDEX:
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
case RT5645_PRIV_DATA:
case RT5645_IN1_CTRL1:
case RT5645_IN1_CTRL2:
case RT5645_IN1_CTRL3:
case RT5645_A_JD_CTRL1:
case RT5645_ADC_EQ_CTRL1:
case RT5645_EQ_CTRL1:
case RT5645_ALC_CTRL_1:
case RT5645_IRQ_CTRL2:
case RT5645_IRQ_CTRL3:
case RT5645_INT_IRQ_ST:
case RT5645_IL_CMD:
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
case RT5650_4BTN_IL_CMD1:
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
case RT5645_VENDOR_ID:
case RT5645_VENDOR_ID1:
case RT5645_VENDOR_ID2:
ASoC: rt5645: fix coccinelle warnings Return statements in functions returning bool should use true/false instead of 1/0. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08 15:42:37 +08:00
return true;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
default:
ASoC: rt5645: fix coccinelle warnings Return statements in functions returning bool should use true/false instead of 1/0. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08 15:42:37 +08:00
return false;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
}
}
static bool rt5645_readable_register(struct device *dev, unsigned int reg)
{
int i;
for (i = 0; i < ARRAY_SIZE(rt5645_ranges); i++) {
if (reg >= rt5645_ranges[i].range_min &&
reg <= rt5645_ranges[i].range_max) {
return true;
}
}
switch (reg) {
case RT5645_RESET:
case RT5645_SPK_VOL:
case RT5645_HP_VOL:
case RT5645_LOUT1:
case RT5645_IN1_CTRL1:
case RT5645_IN1_CTRL2:
case RT5645_IN1_CTRL3:
case RT5645_IN2_CTRL:
case RT5645_INL1_INR1_VOL:
case RT5645_SPK_FUNC_LIM:
case RT5645_ADJ_HPF_CTRL:
case RT5645_DAC1_DIG_VOL:
case RT5645_DAC2_DIG_VOL:
case RT5645_DAC_CTRL:
case RT5645_STO1_ADC_DIG_VOL:
case RT5645_MONO_ADC_DIG_VOL:
case RT5645_ADC_BST_VOL1:
case RT5645_ADC_BST_VOL2:
case RT5645_STO1_ADC_MIXER:
case RT5645_MONO_ADC_MIXER:
case RT5645_AD_DA_MIXER:
case RT5645_STO_DAC_MIXER:
case RT5645_MONO_DAC_MIXER:
case RT5645_DIG_MIXER:
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
case RT5650_A_DAC_SOUR:
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
case RT5645_DIG_INF1_DATA:
case RT5645_PDM_OUT_CTRL:
case RT5645_REC_L1_MIXER:
case RT5645_REC_L2_MIXER:
case RT5645_REC_R1_MIXER:
case RT5645_REC_R2_MIXER:
case RT5645_HPMIXL_CTRL:
case RT5645_HPOMIXL_CTRL:
case RT5645_HPMIXR_CTRL:
case RT5645_HPOMIXR_CTRL:
case RT5645_HPO_MIXER:
case RT5645_SPK_L_MIXER:
case RT5645_SPK_R_MIXER:
case RT5645_SPO_MIXER:
case RT5645_SPO_CLSD_RATIO:
case RT5645_OUT_L1_MIXER:
case RT5645_OUT_R1_MIXER:
case RT5645_OUT_L_GAIN1:
case RT5645_OUT_L_GAIN2:
case RT5645_OUT_R_GAIN1:
case RT5645_OUT_R_GAIN2:
case RT5645_LOUT_MIXER:
case RT5645_HAPTIC_CTRL1:
case RT5645_HAPTIC_CTRL2:
case RT5645_HAPTIC_CTRL3:
case RT5645_HAPTIC_CTRL4:
case RT5645_HAPTIC_CTRL5:
case RT5645_HAPTIC_CTRL6:
case RT5645_HAPTIC_CTRL7:
case RT5645_HAPTIC_CTRL8:
case RT5645_HAPTIC_CTRL9:
case RT5645_HAPTIC_CTRL10:
case RT5645_PWR_DIG1:
case RT5645_PWR_DIG2:
case RT5645_PWR_ANLG1:
case RT5645_PWR_ANLG2:
case RT5645_PWR_MIXER:
case RT5645_PWR_VOL:
case RT5645_PRIV_INDEX:
case RT5645_PRIV_DATA:
case RT5645_I2S1_SDP:
case RT5645_I2S2_SDP:
case RT5645_ADDA_CLK1:
case RT5645_ADDA_CLK2:
case RT5645_DMIC_CTRL1:
case RT5645_DMIC_CTRL2:
case RT5645_TDM_CTRL_1:
case RT5645_TDM_CTRL_2:
ASoC: rt5645: Mark RT5645_TDM_CTRL_3 as readable amixer query fails due to it is not readable reigster Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Acked-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-29 05:36:36 +08:00
case RT5645_TDM_CTRL_3:
ASoC: rt5645: make RT5650_TDM_CTRL_4 readable Register RT5650_TDM_CTRL_4(0x7A) is readable and used for mixer setting. It should be added in rt5645_readable_register function. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10 14:34:29 +08:00
case RT5650_TDM_CTRL_4:
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
case RT5645_GLB_CLK:
case RT5645_PLL_CTRL1:
case RT5645_PLL_CTRL2:
case RT5645_ASRC_1:
case RT5645_ASRC_2:
case RT5645_ASRC_3:
case RT5645_ASRC_4:
case RT5645_DEPOP_M1:
case RT5645_DEPOP_M2:
case RT5645_DEPOP_M3:
ASoC: rt5645: Add the register RT5645_CHARGE_PUMP to readable check function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-24 20:32:59 +08:00
case RT5645_CHARGE_PUMP:
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
case RT5645_MICBIAS:
case RT5645_A_JD_CTRL1:
case RT5645_VAD_CTRL4:
case RT5645_CLSD_OUT_CTRL:
case RT5645_ADC_EQ_CTRL1:
case RT5645_ADC_EQ_CTRL2:
case RT5645_EQ_CTRL1:
case RT5645_EQ_CTRL2:
case RT5645_ALC_CTRL_1:
case RT5645_ALC_CTRL_2:
case RT5645_ALC_CTRL_3:
case RT5645_ALC_CTRL_4:
case RT5645_ALC_CTRL_5:
case RT5645_JD_CTRL:
case RT5645_IRQ_CTRL1:
case RT5645_IRQ_CTRL2:
case RT5645_IRQ_CTRL3:
case RT5645_INT_IRQ_ST:
case RT5645_GPIO_CTRL1:
case RT5645_GPIO_CTRL2:
case RT5645_GPIO_CTRL3:
case RT5645_BASS_BACK:
case RT5645_MP3_PLUS1:
case RT5645_MP3_PLUS2:
case RT5645_ADJ_HPF1:
case RT5645_ADJ_HPF2:
case RT5645_HP_CALIB_AMP_DET:
case RT5645_SV_ZCD1:
case RT5645_SV_ZCD2:
case RT5645_IL_CMD:
case RT5645_IL_CMD2:
case RT5645_IL_CMD3:
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
case RT5650_4BTN_IL_CMD1:
case RT5650_4BTN_IL_CMD2:
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
case RT5645_DRC1_HL_CTRL1:
case RT5645_DRC2_HL_CTRL1:
case RT5645_ADC_MONO_HP_CTRL1:
case RT5645_ADC_MONO_HP_CTRL2:
case RT5645_DRC2_CTRL1:
case RT5645_DRC2_CTRL2:
case RT5645_DRC2_CTRL3:
case RT5645_DRC2_CTRL4:
case RT5645_DRC2_CTRL5:
case RT5645_JD_CTRL3:
case RT5645_JD_CTRL4:
case RT5645_GEN_CTRL1:
case RT5645_GEN_CTRL2:
case RT5645_GEN_CTRL3:
case RT5645_VENDOR_ID:
case RT5645_VENDOR_ID1:
case RT5645_VENDOR_ID2:
ASoC: rt5645: fix coccinelle warnings Return statements in functions returning bool should use true/false instead of 1/0. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08 15:42:37 +08:00
return true;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
default:
ASoC: rt5645: fix coccinelle warnings Return statements in functions returning bool should use true/false instead of 1/0. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08 15:42:37 +08:00
return false;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
}
}
static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0);
ASoC: rt5645: make volume TLV closer to reality The volume blocks have an step of 0.375dB, but TLV uses 0.01dB for units. Only use the resolution supported, ignoring the LSB of the volume register. This results in half the steps and 0.75dB per step, but reports accurate levels through TLV. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:47 +08:00
static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -6525, 75, 0);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0);
ASoC: rt5645: make volume TLV closer to reality The volume blocks have an step of 0.375dB, but TLV uses 0.01dB for units. Only use the resolution supported, ignoring the LSB of the volume register. This results in half the steps and 0.75dB per step, but reports accurate levels through TLV. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:47 +08:00
static const DECLARE_TLV_DB_SCALE(adc_vol_tlv, -1725, 75, 0);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
static const DECLARE_TLV_DB_SCALE(adc_bst_tlv, 0, 1200, 0);
/* {0, +20, +24, +30, +35, +40, +44, +50, +52} dB */
ASoC: rt5645: Replace TLV_DB_RANGE_HEAD with DECLARE_TLV_DB_RANGE DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD() that it automatically calculates the number of items in the TLV and is hence less prone to manual error. Generate using the following coccinelle script // <smpl> @@ declarer name DECLARE_TLV_DB_RANGE; identifier tlv; constant x; @@ -unsigned int tlv[] = { - TLV_DB_RANGE_HEAD(x), +DECLARE_TLV_DB_RANGE(tlv, ... -}; +); // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-02 23:19:49 +08:00
static const DECLARE_TLV_DB_RANGE(bst_tlv,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
1, 1, TLV_DB_SCALE_ITEM(2000, 0, 0),
2, 2, TLV_DB_SCALE_ITEM(2400, 0, 0),
3, 5, TLV_DB_SCALE_ITEM(3000, 500, 0),
6, 6, TLV_DB_SCALE_ITEM(4400, 0, 0),
7, 7, TLV_DB_SCALE_ITEM(5000, 0, 0),
ASoC: rt5645: Replace TLV_DB_RANGE_HEAD with DECLARE_TLV_DB_RANGE DECLARE_TLV_DB_RANGE() has the advantage over using TLV_DB_RANGE_HEAD() that it automatically calculates the number of items in the TLV and is hence less prone to manual error. Generate using the following coccinelle script // <smpl> @@ declarer name DECLARE_TLV_DB_RANGE; identifier tlv; constant x; @@ -unsigned int tlv[] = { - TLV_DB_RANGE_HEAD(x), +DECLARE_TLV_DB_RANGE(tlv, ... -}; +); // </smpl> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-02 23:19:49 +08:00
8, 8, TLV_DB_SCALE_ITEM(5200, 0, 0)
);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: Add the control of ClassD modulator Speaker Gain Ratio Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-01 14:47:10 +08:00
/* {-6, -4.5, -3, -1.5, 0, 0.82, 1.58, 2.28} dB */
static const DECLARE_TLV_DB_RANGE(spk_clsd_tlv,
0, 4, TLV_DB_SCALE_ITEM(-600, 150, 0),
5, 5, TLV_DB_SCALE_ITEM(82, 0, 0),
6, 6, TLV_DB_SCALE_ITEM(158, 0, 0),
7, 7, TLV_DB_SCALE_ITEM(228, 0, 0)
);
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
static int rt5645_hweq_info(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo)
{
uinfo->type = SNDRV_CTL_ELEM_TYPE_BYTES;
uinfo->count = RT5645_HWEQ_NUM * sizeof(struct rt5645_eq_param_s);
return 0;
}
static int rt5645_hweq_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: store eq kcontrol byte in __be The eq parameters binary is stored in __be. However, it is unsigned short in rt5645_eq_param_s{} which will cause incorrect type assignment. So add struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to unsigned short in rt5645->eq_param. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-05 10:02:48 +08:00
struct rt5645_eq_param_s_be16 *eq_param =
(struct rt5645_eq_param_s_be16 *)ucontrol->value.bytes.data;
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
int i;
for (i = 0; i < RT5645_HWEQ_NUM; i++) {
eq_param[i].reg = cpu_to_be16(rt5645->eq_param[i].reg);
eq_param[i].val = cpu_to_be16(rt5645->eq_param[i].val);
}
return 0;
}
static bool rt5645_validate_hweq(unsigned short reg)
{
ASoC: rt5645: use logical OR cppcheck warning: sound/soc/codecs/rt5645.c:693:37: style:inconclusive: Boolean expression 'reg>=420&&reg<=461' is used in bitwise operation. Did you mean '||'? [bitwiseOnBoolean] if ((reg >= 0x1a4 && reg <= 0x1cd) | (reg >= 0x1e5 && reg <= 0x1f8) | ^ sound/soc/codecs/rt5645.c:693:70: style:inconclusive: Boolean expression 'reg==177' is used in bitwise operation. Did you mean '||'? [bitwiseOnBoolean] if ((reg >= 0x1a4 && reg <= 0x1cd) | (reg >= 0x1e5 && reg <= 0x1f8) | ^ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210302212527.55158-10-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-03 05:25:12 +08:00
if ((reg >= 0x1a4 && reg <= 0x1cd) || (reg >= 0x1e5 && reg <= 0x1f8) ||
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
(reg == RT5645_EQ_CTRL2))
return true;
return false;
}
static int rt5645_hweq_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: store eq kcontrol byte in __be The eq parameters binary is stored in __be. However, it is unsigned short in rt5645_eq_param_s{} which will cause incorrect type assignment. So add struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to unsigned short in rt5645->eq_param. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-05 10:02:48 +08:00
struct rt5645_eq_param_s_be16 *eq_param =
(struct rt5645_eq_param_s_be16 *)ucontrol->value.bytes.data;
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
int i;
for (i = 0; i < RT5645_HWEQ_NUM; i++) {
ASoC: rt5645: store eq kcontrol byte in __be The eq parameters binary is stored in __be. However, it is unsigned short in rt5645_eq_param_s{} which will cause incorrect type assignment. So add struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to unsigned short in rt5645->eq_param. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-05 10:02:48 +08:00
rt5645->eq_param[i].reg = be16_to_cpu(eq_param[i].reg);
rt5645->eq_param[i].val = be16_to_cpu(eq_param[i].val);
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
}
/* The final setting of the table should be RT5645_EQ_CTRL2 */
for (i = RT5645_HWEQ_NUM - 1; i >= 0; i--) {
ASoC: rt5645: store eq kcontrol byte in __be The eq parameters binary is stored in __be. However, it is unsigned short in rt5645_eq_param_s{} which will cause incorrect type assignment. So add struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to unsigned short in rt5645->eq_param. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-05 10:02:48 +08:00
if (rt5645->eq_param[i].reg == 0)
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
continue;
ASoC: rt5645: store eq kcontrol byte in __be The eq parameters binary is stored in __be. However, it is unsigned short in rt5645_eq_param_s{} which will cause incorrect type assignment. So add struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to unsigned short in rt5645->eq_param. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-05 10:02:48 +08:00
else if (rt5645->eq_param[i].reg != RT5645_EQ_CTRL2)
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
return 0;
else
break;
}
for (i = 0; i < RT5645_HWEQ_NUM; i++) {
ASoC: rt5645: store eq kcontrol byte in __be The eq parameters binary is stored in __be. However, it is unsigned short in rt5645_eq_param_s{} which will cause incorrect type assignment. So add struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to unsigned short in rt5645->eq_param. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-05 10:02:48 +08:00
if (!rt5645_validate_hweq(rt5645->eq_param[i].reg) &&
rt5645->eq_param[i].reg != 0)
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
return 0;
ASoC: rt5645: store eq kcontrol byte in __be The eq parameters binary is stored in __be. However, it is unsigned short in rt5645_eq_param_s{} which will cause incorrect type assignment. So add struct rt5645_eq_param_s_be16{} to store the eq binary and convert it to unsigned short in rt5645->eq_param. Cc: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-01-05 10:02:48 +08:00
else if (rt5645->eq_param[i].reg == 0)
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
break;
}
return 0;
}
#define RT5645_HWEQ(xname) \
{ .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = xname, \
.info = rt5645_hweq_info, \
.get = rt5645_hweq_get, \
.put = rt5645_hweq_put \
}
ASoC: rt5645: Power up the RC clock to make sure the speaker volume adjust properly Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-05 19:55:51 +08:00
static int rt5645_spk_put_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_component *component = snd_kcontrol_chip(kcontrol);
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
int ret;
regmap_update_bits(rt5645->regmap, RT5645_MICBIAS,
RT5645_PWR_CLK25M_MASK, RT5645_PWR_CLK25M_PU);
ret = snd_soc_put_volsw(kcontrol, ucontrol);
ASoC: rt5645: Use the mod_delayed_work instead of the queue_delayed_work and cancel_delayed_work_sync Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 19:35:18 +08:00
mod_delayed_work(system_power_efficient_wq, &rt5645->rcclock_work,
ASoC: rt5645: Power up the RC clock to make sure the speaker volume adjust properly Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-05 19:55:51 +08:00
msecs_to_jiffies(200));
return ret;
}
ASoC: rt5645: add DAC1 soft volume func control This patch add an alsa control for DAC1 digital volume control function selection. The options are: 0: Gain update immediately 1: Gain update when a zero crossing 2: Gain update when a zero crossing with a soft ramp Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-07 18:56:31 +08:00
static const char * const rt5645_dac1_vol_ctrl_mode_text[] = {
"immediately", "zero crossing", "soft ramp"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_dac1_vol_ctrl_mode, RT5645_PR_BASE,
RT5645_DA1_ZDET_SFT, rt5645_dac1_vol_ctrl_mode_text);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
static const struct snd_kcontrol_new rt5645_snd_controls[] = {
/* Speaker Output Volume */
SOC_DOUBLE("Speaker Channel Switch", RT5645_SPK_VOL,
RT5645_VOL_L_SFT, RT5645_VOL_R_SFT, 1, 1),
ASoC: rt5645: Power up the RC clock to make sure the speaker volume adjust properly Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-05 19:55:51 +08:00
SOC_DOUBLE_EXT_TLV("Speaker Playback Volume", RT5645_SPK_VOL,
RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 39, 1, snd_soc_get_volsw,
rt5645_spk_put_volsw, out_vol_tlv),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: Add the control of ClassD modulator Speaker Gain Ratio Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-01 14:47:10 +08:00
/* ClassD modulator Speaker Gain Ratio */
SOC_SINGLE_TLV("Speaker ClassD Playback Volume", RT5645_SPO_CLSD_RATIO,
RT5645_SPK_G_CLSD_SFT, 7, 0, spk_clsd_tlv),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
/* Headphone Output Volume */
ASoC: rt5645: Rename HP control to Headphone Use the standard name "Headphone" instead of "HP" for better userspace integration. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-14 08:43:31 +08:00
SOC_DOUBLE("Headphone Channel Switch", RT5645_HP_VOL,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_VOL_L_SFT, RT5645_VOL_R_SFT, 1, 1),
ASoC: rt5645: Rename HP control to Headphone Use the standard name "Headphone" instead of "HP" for better userspace integration. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-14 08:43:31 +08:00
SOC_DOUBLE_TLV("Headphone Playback Volume", RT5645_HP_VOL,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 39, 1, out_vol_tlv),
/* OUTPUT Control */
SOC_DOUBLE("OUT Playback Switch", RT5645_LOUT1,
RT5645_L_MUTE_SFT, RT5645_R_MUTE_SFT, 1, 1),
SOC_DOUBLE("OUT Channel Switch", RT5645_LOUT1,
RT5645_VOL_L_SFT, RT5645_VOL_R_SFT, 1, 1),
SOC_DOUBLE_TLV("OUT Playback Volume", RT5645_LOUT1,
RT5645_L_VOL_SFT, RT5645_R_VOL_SFT, 39, 1, out_vol_tlv),
/* DAC Digital Volume */
SOC_DOUBLE("DAC2 Playback Switch", RT5645_DAC_CTRL,
RT5645_M_DAC_L2_VOL_SFT, RT5645_M_DAC_R2_VOL_SFT, 1, 1),
SOC_DOUBLE_TLV("DAC1 Playback Volume", RT5645_DAC1_DIG_VOL,
ASoC: rt5645: make volume TLV closer to reality The volume blocks have an step of 0.375dB, but TLV uses 0.01dB for units. Only use the resolution supported, ignoring the LSB of the volume register. This results in half the steps and 0.75dB per step, but reports accurate levels through TLV. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:47 +08:00
RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 87, 0, dac_vol_tlv),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
SOC_DOUBLE_TLV("Mono DAC Playback Volume", RT5645_DAC2_DIG_VOL,
ASoC: rt5645: make volume TLV closer to reality The volume blocks have an step of 0.375dB, but TLV uses 0.01dB for units. Only use the resolution supported, ignoring the LSB of the volume register. This results in half the steps and 0.75dB per step, but reports accurate levels through TLV. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:47 +08:00
RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 87, 0, dac_vol_tlv),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
/* IN1/IN2 Control */
SOC_SINGLE_TLV("IN1 Boost", RT5645_IN1_CTRL1,
ASoC: rt5645: fix the shift bit of IN1 boost The shift bit of IN1 boost gain control is 12. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2016-01-21 13:13:40 +08:00
RT5645_BST_SFT1, 12, 0, bst_tlv),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
SOC_SINGLE_TLV("IN2 Boost", RT5645_IN2_CTRL,
RT5645_BST_SFT2, 8, 0, bst_tlv),
/* INL/INR Volume Control */
SOC_DOUBLE_TLV("IN Capture Volume", RT5645_INL1_INR1_VOL,
RT5645_INL_VOL_SFT, RT5645_INR_VOL_SFT, 31, 1, in_vol_tlv),
/* ADC Digital Volume Control */
SOC_DOUBLE("ADC Capture Switch", RT5645_STO1_ADC_DIG_VOL,
RT5645_L_MUTE_SFT, RT5645_R_MUTE_SFT, 1, 1),
SOC_DOUBLE_TLV("ADC Capture Volume", RT5645_STO1_ADC_DIG_VOL,
ASoC: rt5645: make volume TLV closer to reality The volume blocks have an step of 0.375dB, but TLV uses 0.01dB for units. Only use the resolution supported, ignoring the LSB of the volume register. This results in half the steps and 0.75dB per step, but reports accurate levels through TLV. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:47 +08:00
RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 63, 0, adc_vol_tlv),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
SOC_DOUBLE("Mono ADC Capture Switch", RT5645_MONO_ADC_DIG_VOL,
RT5645_L_MUTE_SFT, RT5645_R_MUTE_SFT, 1, 1),
SOC_DOUBLE_TLV("Mono ADC Capture Volume", RT5645_MONO_ADC_DIG_VOL,
ASoC: rt5645: make volume TLV closer to reality The volume blocks have an step of 0.375dB, but TLV uses 0.01dB for units. Only use the resolution supported, ignoring the LSB of the volume register. This results in half the steps and 0.75dB per step, but reports accurate levels through TLV. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:47 +08:00
RT5645_L_VOL_SFT + 1, RT5645_R_VOL_SFT + 1, 63, 0, adc_vol_tlv),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
/* ADC Boost Volume Control */
ASoC: rt5645: Correct the naming and setting of ADC Boost Volume Control Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-01 14:47:09 +08:00
SOC_DOUBLE_TLV("ADC Boost Capture Volume", RT5645_ADC_BST_VOL1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_STO1_ADC_L_BST_SFT, RT5645_STO1_ADC_R_BST_SFT, 3, 0,
adc_bst_tlv),
ASoC: rt5645: Correct the naming and setting of ADC Boost Volume Control Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-01 14:47:09 +08:00
SOC_DOUBLE_TLV("Mono ADC Boost Capture Volume", RT5645_ADC_BST_VOL2,
RT5645_MONO_ADC_L_BST_SFT, RT5645_MONO_ADC_R_BST_SFT, 3, 0,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
adc_bst_tlv),
/* I2S2 function select */
SOC_SINGLE("I2S2 Func Switch", RT5645_GPIO_CTRL1, RT5645_I2S2_SEL_SFT,
1, 1),
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
RT5645_HWEQ("Speaker HWEQ"),
ASoC: rt5645: add DAC1 soft volume func control This patch add an alsa control for DAC1 digital volume control function selection. The options are: 0: Gain update immediately 1: Gain update when a zero crossing 2: Gain update when a zero crossing with a soft ramp Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-07 18:56:31 +08:00
/* Digital Soft Volume Control */
SOC_ENUM("DAC1 Digital Volume Control Func", rt5645_dac1_vol_ctrl_mode),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
};
/**
* set_dmic_clk - Set parameter of dmic.
*
* @w: DAPM widget.
* @kcontrol: The kcontrol of this widget.
* @event: Event id.
*
*/
static int set_dmic_clk(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: Add function "rl6231_get_pre_div" to correct the dmic clock calculation Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-05 10:03:18 +08:00
int idx, rate;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: Add function "rl6231_get_pre_div" to correct the dmic clock calculation Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-05 10:03:18 +08:00
rate = rt5645->sysclk / rl6231_get_pre_div(rt5645->regmap,
RT5645_ADDA_CLK1, RT5645_I2S_PD1_SFT);
idx = rl6231_calc_dmic_clk(rate);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
if (idx < 0)
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_err(component->dev, "Failed to set DMIC clock\n");
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
else
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DMIC_CTRL1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_DMIC_CLK_MASK, idx << RT5645_DMIC_CLK_SFT);
return idx;
}
static int is_sys_clk_from_pll(struct snd_soc_dapm_widget *source,
struct snd_soc_dapm_widget *sink)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = snd_soc_dapm_to_component(source->dapm);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
unsigned int val;
ASoC: codecs: rt*: rename to snd_soc_component_read() We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87d05z4mce.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16 13:21:37 +08:00
val = snd_soc_component_read(component, RT5645_GLB_CLK);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
val &= RT5645_SCLK_SRC_MASK;
if (val == RT5645_SCLK_SRC_PLL1)
return 1;
else
return 0;
}
ASoC: rt5645: Add ASRC support This patch add ASRC support for rt5645 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 15:37:55 +08:00
static int is_using_asrc(struct snd_soc_dapm_widget *source,
struct snd_soc_dapm_widget *sink)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = snd_soc_dapm_to_component(source->dapm);
ASoC: rt5645: Add ASRC support This patch add ASRC support for rt5645 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 15:37:55 +08:00
unsigned int reg, shift, val;
switch (source->shift) {
case 0:
reg = RT5645_ASRC_3;
shift = 0;
break;
case 1:
reg = RT5645_ASRC_3;
shift = 4;
break;
case 3:
reg = RT5645_ASRC_2;
shift = 0;
break;
case 8:
reg = RT5645_ASRC_2;
shift = 4;
break;
case 9:
reg = RT5645_ASRC_2;
shift = 8;
break;
case 10:
reg = RT5645_ASRC_2;
shift = 12;
break;
default:
return 0;
}
ASoC: codecs: rt*: rename to snd_soc_component_read() We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87d05z4mce.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16 13:21:37 +08:00
val = (snd_soc_component_read(component, reg) >> shift) & 0xf;
ASoC: rt5645: Add ASRC support This patch add ASRC support for rt5645 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 15:37:55 +08:00
switch (val) {
case 1:
case 2:
case 3:
case 4:
return 1;
default:
return 0;
}
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static int rt5645_enable_hweq(struct snd_soc_component *component)
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
int i;
for (i = 0; i < RT5645_HWEQ_NUM; i++) {
if (rt5645_validate_hweq(rt5645->eq_param[i].reg))
regmap_write(rt5645->regmap, rt5645->eq_param[i].reg,
rt5645->eq_param[i].val);
else
break;
}
return 0;
}
ASoC: rt5645: add API to select ASRC clock source This patch defines an API to select the clock source for specified filters. Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Acked-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-05 10:19:31 +08:00
/**
* rt5645_sel_asrc_clk_src - select ASRC clock source for a set of filters
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
* @component: SoC audio component device.
ASoC: rt5645: add API to select ASRC clock source This patch defines an API to select the clock source for specified filters. Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Acked-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-05 10:19:31 +08:00
* @filter_mask: mask of filters.
* @clk_src: clock source
*
* The ASRC function is for asynchronous MCLK and LRCK. Also, since RT5645 can
* only support standard 32fs or 64fs i2s format, ASRC should be enabled to
* support special i2s clock format such as Intel's 100fs(100 * sampling rate).
* ASRC function will track i2s clock and generate a corresponding system clock
* for codec. This function provides an API to select the clock source for a
* set of filters specified by the mask. And the codec driver will turn on ASRC
* for these filters if ASRC is selected as their clock source.
*/
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
int rt5645_sel_asrc_clk_src(struct snd_soc_component *component,
ASoC: rt5645: add API to select ASRC clock source This patch defines an API to select the clock source for specified filters. Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Acked-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-05 10:19:31 +08:00
unsigned int filter_mask, unsigned int clk_src)
{
unsigned int asrc2_mask = 0;
unsigned int asrc2_value = 0;
unsigned int asrc3_mask = 0;
unsigned int asrc3_value = 0;
switch (clk_src) {
case RT5645_CLK_SEL_SYS:
case RT5645_CLK_SEL_I2S1_ASRC:
case RT5645_CLK_SEL_I2S2_ASRC:
case RT5645_CLK_SEL_SYS2:
break;
default:
return -EINVAL;
}
if (filter_mask & RT5645_DA_STEREO_FILTER) {
asrc2_mask |= RT5645_DA_STO_CLK_SEL_MASK;
asrc2_value = (asrc2_value & ~RT5645_DA_STO_CLK_SEL_MASK)
| (clk_src << RT5645_DA_STO_CLK_SEL_SFT);
}
if (filter_mask & RT5645_DA_MONO_L_FILTER) {
asrc2_mask |= RT5645_DA_MONOL_CLK_SEL_MASK;
asrc2_value = (asrc2_value & ~RT5645_DA_MONOL_CLK_SEL_MASK)
| (clk_src << RT5645_DA_MONOL_CLK_SEL_SFT);
}
if (filter_mask & RT5645_DA_MONO_R_FILTER) {
asrc2_mask |= RT5645_DA_MONOR_CLK_SEL_MASK;
asrc2_value = (asrc2_value & ~RT5645_DA_MONOR_CLK_SEL_MASK)
| (clk_src << RT5645_DA_MONOR_CLK_SEL_SFT);
}
if (filter_mask & RT5645_AD_STEREO_FILTER) {
asrc2_mask |= RT5645_AD_STO1_CLK_SEL_MASK;
asrc2_value = (asrc2_value & ~RT5645_AD_STO1_CLK_SEL_MASK)
| (clk_src << RT5645_AD_STO1_CLK_SEL_SFT);
}
if (filter_mask & RT5645_AD_MONO_L_FILTER) {
asrc3_mask |= RT5645_AD_MONOL_CLK_SEL_MASK;
asrc3_value = (asrc3_value & ~RT5645_AD_MONOL_CLK_SEL_MASK)
| (clk_src << RT5645_AD_MONOL_CLK_SEL_SFT);
}
if (filter_mask & RT5645_AD_MONO_R_FILTER) {
asrc3_mask |= RT5645_AD_MONOR_CLK_SEL_MASK;
asrc3_value = (asrc3_value & ~RT5645_AD_MONOR_CLK_SEL_MASK)
| (clk_src << RT5645_AD_MONOR_CLK_SEL_SFT);
}
if (asrc2_mask)
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_ASRC_2,
ASoC: rt5645: add API to select ASRC clock source This patch defines an API to select the clock source for specified filters. Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Acked-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-05 10:19:31 +08:00
asrc2_mask, asrc2_value);
if (asrc3_mask)
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_ASRC_3,
ASoC: rt5645: add API to select ASRC clock source This patch defines an API to select the clock source for specified filters. Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Acked-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-02-05 10:19:31 +08:00
asrc3_mask, asrc3_value);
return 0;
}
EXPORT_SYMBOL_GPL(rt5645_sel_asrc_clk_src);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
/* Digital Mixer */
static const struct snd_kcontrol_new rt5645_sto1_adc_l_mix[] = {
SOC_DAPM_SINGLE("ADC1 Switch", RT5645_STO1_ADC_MIXER,
RT5645_M_ADC_L1_SFT, 1, 1),
SOC_DAPM_SINGLE("ADC2 Switch", RT5645_STO1_ADC_MIXER,
RT5645_M_ADC_L2_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_sto1_adc_r_mix[] = {
SOC_DAPM_SINGLE("ADC1 Switch", RT5645_STO1_ADC_MIXER,
RT5645_M_ADC_R1_SFT, 1, 1),
SOC_DAPM_SINGLE("ADC2 Switch", RT5645_STO1_ADC_MIXER,
RT5645_M_ADC_R2_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_mono_adc_l_mix[] = {
SOC_DAPM_SINGLE("ADC1 Switch", RT5645_MONO_ADC_MIXER,
RT5645_M_MONO_ADC_L1_SFT, 1, 1),
SOC_DAPM_SINGLE("ADC2 Switch", RT5645_MONO_ADC_MIXER,
RT5645_M_MONO_ADC_L2_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_mono_adc_r_mix[] = {
SOC_DAPM_SINGLE("ADC1 Switch", RT5645_MONO_ADC_MIXER,
RT5645_M_MONO_ADC_R1_SFT, 1, 1),
SOC_DAPM_SINGLE("ADC2 Switch", RT5645_MONO_ADC_MIXER,
RT5645_M_MONO_ADC_R2_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_dac_l_mix[] = {
SOC_DAPM_SINGLE("Stereo ADC Switch", RT5645_AD_DA_MIXER,
RT5645_M_ADCMIX_L_SFT, 1, 1),
ASoC: rt5645: Use the type SOC_DAPM_SINGLE_AUTODISABLE to prevent the weird sound in runtime of power up Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-23 14:35:28 +08:00
SOC_DAPM_SINGLE_AUTODISABLE("DAC1 Switch", RT5645_AD_DA_MIXER,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_M_DAC1_L_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_dac_r_mix[] = {
SOC_DAPM_SINGLE("Stereo ADC Switch", RT5645_AD_DA_MIXER,
RT5645_M_ADCMIX_R_SFT, 1, 1),
ASoC: rt5645: Use the type SOC_DAPM_SINGLE_AUTODISABLE to prevent the weird sound in runtime of power up Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-23 14:35:28 +08:00
SOC_DAPM_SINGLE_AUTODISABLE("DAC1 Switch", RT5645_AD_DA_MIXER,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_M_DAC1_R_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_sto_dac_l_mix[] = {
SOC_DAPM_SINGLE("DAC L1 Switch", RT5645_STO_DAC_MIXER,
RT5645_M_DAC_L1_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC L2 Switch", RT5645_STO_DAC_MIXER,
RT5645_M_DAC_L2_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC R1 Switch", RT5645_STO_DAC_MIXER,
RT5645_M_DAC_R1_STO_L_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_sto_dac_r_mix[] = {
SOC_DAPM_SINGLE("DAC R1 Switch", RT5645_STO_DAC_MIXER,
RT5645_M_DAC_R1_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC R2 Switch", RT5645_STO_DAC_MIXER,
RT5645_M_DAC_R2_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC L1 Switch", RT5645_STO_DAC_MIXER,
RT5645_M_DAC_L1_STO_R_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_mono_dac_l_mix[] = {
SOC_DAPM_SINGLE("DAC L1 Switch", RT5645_MONO_DAC_MIXER,
RT5645_M_DAC_L1_MONO_L_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC L2 Switch", RT5645_MONO_DAC_MIXER,
RT5645_M_DAC_L2_MONO_L_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC R2 Switch", RT5645_MONO_DAC_MIXER,
RT5645_M_DAC_R2_MONO_L_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_mono_dac_r_mix[] = {
SOC_DAPM_SINGLE("DAC R1 Switch", RT5645_MONO_DAC_MIXER,
RT5645_M_DAC_R1_MONO_R_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC R2 Switch", RT5645_MONO_DAC_MIXER,
RT5645_M_DAC_R2_MONO_R_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC L2 Switch", RT5645_MONO_DAC_MIXER,
RT5645_M_DAC_L2_MONO_R_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_dig_l_mix[] = {
SOC_DAPM_SINGLE("Sto DAC Mix L Switch", RT5645_DIG_MIXER,
RT5645_M_STO_L_DAC_L_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC L2 Switch", RT5645_DIG_MIXER,
RT5645_M_DAC_L2_DAC_L_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC R2 Switch", RT5645_DIG_MIXER,
RT5645_M_DAC_R2_DAC_L_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_dig_r_mix[] = {
SOC_DAPM_SINGLE("Sto DAC Mix R Switch", RT5645_DIG_MIXER,
RT5645_M_STO_R_DAC_R_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC R2 Switch", RT5645_DIG_MIXER,
RT5645_M_DAC_R2_DAC_R_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC L2 Switch", RT5645_DIG_MIXER,
RT5645_M_DAC_L2_DAC_R_SFT, 1, 1),
};
/* Analog Input Mixer */
static const struct snd_kcontrol_new rt5645_rec_l_mix[] = {
SOC_DAPM_SINGLE("HPOL Switch", RT5645_REC_L2_MIXER,
RT5645_M_HP_L_RM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("INL Switch", RT5645_REC_L2_MIXER,
RT5645_M_IN_L_RM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("BST2 Switch", RT5645_REC_L2_MIXER,
RT5645_M_BST2_RM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("BST1 Switch", RT5645_REC_L2_MIXER,
RT5645_M_BST1_RM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("OUT MIXL Switch", RT5645_REC_L2_MIXER,
RT5645_M_OM_L_RM_L_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_rec_r_mix[] = {
SOC_DAPM_SINGLE("HPOR Switch", RT5645_REC_R2_MIXER,
RT5645_M_HP_R_RM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("INR Switch", RT5645_REC_R2_MIXER,
RT5645_M_IN_R_RM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("BST2 Switch", RT5645_REC_R2_MIXER,
RT5645_M_BST2_RM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("BST1 Switch", RT5645_REC_R2_MIXER,
RT5645_M_BST1_RM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("OUT MIXR Switch", RT5645_REC_R2_MIXER,
RT5645_M_OM_R_RM_R_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_spk_l_mix[] = {
SOC_DAPM_SINGLE("DAC L1 Switch", RT5645_SPK_L_MIXER,
RT5645_M_DAC_L1_SM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC L2 Switch", RT5645_SPK_L_MIXER,
RT5645_M_DAC_L2_SM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("INL Switch", RT5645_SPK_L_MIXER,
RT5645_M_IN_L_SM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("BST1 Switch", RT5645_SPK_L_MIXER,
RT5645_M_BST1_L_SM_L_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_spk_r_mix[] = {
SOC_DAPM_SINGLE("DAC R1 Switch", RT5645_SPK_R_MIXER,
RT5645_M_DAC_R1_SM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC R2 Switch", RT5645_SPK_R_MIXER,
RT5645_M_DAC_R2_SM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("INR Switch", RT5645_SPK_R_MIXER,
RT5645_M_IN_R_SM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("BST2 Switch", RT5645_SPK_R_MIXER,
RT5645_M_BST2_R_SM_R_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_out_l_mix[] = {
SOC_DAPM_SINGLE("BST1 Switch", RT5645_OUT_L1_MIXER,
RT5645_M_BST1_OM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("INL Switch", RT5645_OUT_L1_MIXER,
RT5645_M_IN_L_OM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC L2 Switch", RT5645_OUT_L1_MIXER,
RT5645_M_DAC_L2_OM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC L1 Switch", RT5645_OUT_L1_MIXER,
RT5645_M_DAC_L1_OM_L_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_out_r_mix[] = {
SOC_DAPM_SINGLE("BST2 Switch", RT5645_OUT_R1_MIXER,
RT5645_M_BST2_OM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("INR Switch", RT5645_OUT_R1_MIXER,
RT5645_M_IN_R_OM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC R2 Switch", RT5645_OUT_R1_MIXER,
RT5645_M_DAC_R2_OM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC R1 Switch", RT5645_OUT_R1_MIXER,
RT5645_M_DAC_R1_OM_R_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_spo_l_mix[] = {
SOC_DAPM_SINGLE("DAC R1 Switch", RT5645_SPO_MIXER,
RT5645_M_DAC_R1_SPM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC L1 Switch", RT5645_SPO_MIXER,
RT5645_M_DAC_L1_SPM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("SPKVOL R Switch", RT5645_SPO_MIXER,
RT5645_M_SV_R_SPM_L_SFT, 1, 1),
SOC_DAPM_SINGLE("SPKVOL L Switch", RT5645_SPO_MIXER,
RT5645_M_SV_L_SPM_L_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_spo_r_mix[] = {
SOC_DAPM_SINGLE("DAC R1 Switch", RT5645_SPO_MIXER,
RT5645_M_DAC_R1_SPM_R_SFT, 1, 1),
SOC_DAPM_SINGLE("SPKVOL R Switch", RT5645_SPO_MIXER,
RT5645_M_SV_R_SPM_R_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_hpo_mix[] = {
SOC_DAPM_SINGLE("DAC1 Switch", RT5645_HPO_MIXER,
RT5645_M_DAC1_HM_SFT, 1, 1),
SOC_DAPM_SINGLE("HPVOL Switch", RT5645_HPO_MIXER,
RT5645_M_HPVOL_HM_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_hpvoll_mix[] = {
SOC_DAPM_SINGLE("DAC1 Switch", RT5645_HPOMIXL_CTRL,
RT5645_M_DAC1_HV_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC2 Switch", RT5645_HPOMIXL_CTRL,
RT5645_M_DAC2_HV_SFT, 1, 1),
SOC_DAPM_SINGLE("INL Switch", RT5645_HPOMIXL_CTRL,
RT5645_M_IN_HV_SFT, 1, 1),
SOC_DAPM_SINGLE("BST1 Switch", RT5645_HPOMIXL_CTRL,
RT5645_M_BST1_HV_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_hpvolr_mix[] = {
SOC_DAPM_SINGLE("DAC1 Switch", RT5645_HPOMIXR_CTRL,
RT5645_M_DAC1_HV_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC2 Switch", RT5645_HPOMIXR_CTRL,
RT5645_M_DAC2_HV_SFT, 1, 1),
SOC_DAPM_SINGLE("INR Switch", RT5645_HPOMIXR_CTRL,
RT5645_M_IN_HV_SFT, 1, 1),
SOC_DAPM_SINGLE("BST2 Switch", RT5645_HPOMIXR_CTRL,
RT5645_M_BST2_HV_SFT, 1, 1),
};
static const struct snd_kcontrol_new rt5645_lout_mix[] = {
SOC_DAPM_SINGLE("DAC L1 Switch", RT5645_LOUT_MIXER,
RT5645_M_DAC_L1_LM_SFT, 1, 1),
SOC_DAPM_SINGLE("DAC R1 Switch", RT5645_LOUT_MIXER,
RT5645_M_DAC_R1_LM_SFT, 1, 1),
SOC_DAPM_SINGLE("OUTMIX L Switch", RT5645_LOUT_MIXER,
RT5645_M_OV_L_LM_SFT, 1, 1),
SOC_DAPM_SINGLE("OUTMIX R Switch", RT5645_LOUT_MIXER,
RT5645_M_OV_R_LM_SFT, 1, 1),
};
/*DAC1 L/R source*/ /* MX-29 [9:8] [11:10] */
static const char * const rt5645_dac1_src[] = {
"IF1 DAC", "IF2 DAC", "IF3 DAC"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_dac1l_enum, RT5645_AD_DA_MIXER,
RT5645_DAC1_L_SEL_SFT, rt5645_dac1_src);
static const struct snd_kcontrol_new rt5645_dac1l_mux =
SOC_DAPM_ENUM("DAC1 L source", rt5645_dac1l_enum);
static SOC_ENUM_SINGLE_DECL(
rt5645_dac1r_enum, RT5645_AD_DA_MIXER,
RT5645_DAC1_R_SEL_SFT, rt5645_dac1_src);
static const struct snd_kcontrol_new rt5645_dac1r_mux =
SOC_DAPM_ENUM("DAC1 R source", rt5645_dac1r_enum);
/*DAC2 L/R source*/ /* MX-1B [6:4] [2:0] */
static const char * const rt5645_dac12_src[] = {
"IF1 DAC", "IF2 DAC", "IF3 DAC", "Mono ADC", "VAD_ADC"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_dac2l_enum, RT5645_DAC_CTRL,
RT5645_DAC2_L_SEL_SFT, rt5645_dac12_src);
static const struct snd_kcontrol_new rt5645_dac_l2_mux =
SOC_DAPM_ENUM("DAC2 L source", rt5645_dac2l_enum);
static const char * const rt5645_dacr2_src[] = {
"IF1 DAC", "IF2 DAC", "IF3 DAC", "Mono ADC", "Haptic"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_dac2r_enum, RT5645_DAC_CTRL,
RT5645_DAC2_R_SEL_SFT, rt5645_dacr2_src);
static const struct snd_kcontrol_new rt5645_dac_r2_mux =
SOC_DAPM_ENUM("DAC2 R source", rt5645_dac2r_enum);
/* Stereo1 ADC source */
/* MX-27 [12] */
static const char * const rt5645_stereo_adc1_src[] = {
"DAC MIX", "ADC"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_stereo1_adc1_enum, RT5645_STO1_ADC_MIXER,
RT5645_ADC_1_SRC_SFT, rt5645_stereo_adc1_src);
static const struct snd_kcontrol_new rt5645_sto_adc1_mux =
SOC_DAPM_ENUM("Stereo1 ADC1 Mux", rt5645_stereo1_adc1_enum);
/* MX-27 [11] */
static const char * const rt5645_stereo_adc2_src[] = {
"DAC MIX", "DMIC"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_stereo1_adc2_enum, RT5645_STO1_ADC_MIXER,
RT5645_ADC_2_SRC_SFT, rt5645_stereo_adc2_src);
static const struct snd_kcontrol_new rt5645_sto_adc2_mux =
SOC_DAPM_ENUM("Stereo1 ADC2 Mux", rt5645_stereo1_adc2_enum);
/* MX-27 [8] */
static const char * const rt5645_stereo_dmic_src[] = {
"DMIC1", "DMIC2"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_stereo1_dmic_enum, RT5645_STO1_ADC_MIXER,
RT5645_DMIC_SRC_SFT, rt5645_stereo_dmic_src);
static const struct snd_kcontrol_new rt5645_sto1_dmic_mux =
SOC_DAPM_ENUM("Stereo1 DMIC source", rt5645_stereo1_dmic_enum);
/* Mono ADC source */
/* MX-28 [12] */
static const char * const rt5645_mono_adc_l1_src[] = {
"Mono DAC MIXL", "ADC"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_mono_adc_l1_enum, RT5645_MONO_ADC_MIXER,
RT5645_MONO_ADC_L1_SRC_SFT, rt5645_mono_adc_l1_src);
static const struct snd_kcontrol_new rt5645_mono_adc_l1_mux =
SOC_DAPM_ENUM("Mono ADC1 left source", rt5645_mono_adc_l1_enum);
/* MX-28 [11] */
static const char * const rt5645_mono_adc_l2_src[] = {
"Mono DAC MIXL", "DMIC"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_mono_adc_l2_enum, RT5645_MONO_ADC_MIXER,
RT5645_MONO_ADC_L2_SRC_SFT, rt5645_mono_adc_l2_src);
static const struct snd_kcontrol_new rt5645_mono_adc_l2_mux =
SOC_DAPM_ENUM("Mono ADC2 left source", rt5645_mono_adc_l2_enum);
/* MX-28 [8] */
static const char * const rt5645_mono_dmic_src[] = {
"DMIC1", "DMIC2"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_mono_dmic_l_enum, RT5645_MONO_ADC_MIXER,
RT5645_MONO_DMIC_L_SRC_SFT, rt5645_mono_dmic_src);
static const struct snd_kcontrol_new rt5645_mono_dmic_l_mux =
SOC_DAPM_ENUM("Mono DMIC left source", rt5645_mono_dmic_l_enum);
/* MX-28 [1:0] */
static SOC_ENUM_SINGLE_DECL(
rt5645_mono_dmic_r_enum, RT5645_MONO_ADC_MIXER,
RT5645_MONO_DMIC_R_SRC_SFT, rt5645_mono_dmic_src);
static const struct snd_kcontrol_new rt5645_mono_dmic_r_mux =
SOC_DAPM_ENUM("Mono DMIC Right source", rt5645_mono_dmic_r_enum);
/* MX-28 [4] */
static const char * const rt5645_mono_adc_r1_src[] = {
"Mono DAC MIXR", "ADC"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_mono_adc_r1_enum, RT5645_MONO_ADC_MIXER,
RT5645_MONO_ADC_R1_SRC_SFT, rt5645_mono_adc_r1_src);
static const struct snd_kcontrol_new rt5645_mono_adc_r1_mux =
SOC_DAPM_ENUM("Mono ADC1 right source", rt5645_mono_adc_r1_enum);
/* MX-28 [3] */
static const char * const rt5645_mono_adc_r2_src[] = {
"Mono DAC MIXR", "DMIC"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_mono_adc_r2_enum, RT5645_MONO_ADC_MIXER,
RT5645_MONO_ADC_R2_SRC_SFT, rt5645_mono_adc_r2_src);
static const struct snd_kcontrol_new rt5645_mono_adc_r2_mux =
SOC_DAPM_ENUM("Mono ADC2 right source", rt5645_mono_adc_r2_enum);
/* MX-77 [9:8] */
static const char * const rt5645_if1_adc_in_src[] = {
ASoC: rt5645: add TDM slot control into dapm route This patch adds TDM slot control into dapm route. The control bits are different between rt5645 and rt5650, so we have separate dapm routes for each codec. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:44 +08:00
"IF_ADC1/IF_ADC2/VAD_ADC", "IF_ADC2/IF_ADC1/VAD_ADC",
"VAD_ADC/IF_ADC1/IF_ADC2", "VAD_ADC/IF_ADC2/IF_ADC1"
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
};
static SOC_ENUM_SINGLE_DECL(
rt5645_if1_adc_in_enum, RT5645_TDM_CTRL_1,
RT5645_IF1_ADC_IN_SFT, rt5645_if1_adc_in_src);
static const struct snd_kcontrol_new rt5645_if1_adc_in_mux =
SOC_DAPM_ENUM("IF1 ADC IN source", rt5645_if1_adc_in_enum);
ASoC: rt5645: add TDM slot control into dapm route This patch adds TDM slot control into dapm route. The control bits are different between rt5645 and rt5650, so we have separate dapm routes for each codec. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:44 +08:00
/* MX-78 [4:0] */
static const char * const rt5650_if1_adc_in_src[] = {
"IF_ADC1/IF_ADC2/DAC_REF/Null",
"IF_ADC1/IF_ADC2/Null/DAC_REF",
"IF_ADC1/DAC_REF/IF_ADC2/Null",
"IF_ADC1/DAC_REF/Null/IF_ADC2",
"IF_ADC1/Null/DAC_REF/IF_ADC2",
"IF_ADC1/Null/IF_ADC2/DAC_REF",
"IF_ADC2/IF_ADC1/DAC_REF/Null",
"IF_ADC2/IF_ADC1/Null/DAC_REF",
"IF_ADC2/DAC_REF/IF_ADC1/Null",
"IF_ADC2/DAC_REF/Null/IF_ADC1",
"IF_ADC2/Null/DAC_REF/IF_ADC1",
"IF_ADC2/Null/IF_ADC1/DAC_REF",
"DAC_REF/IF_ADC1/IF_ADC2/Null",
"DAC_REF/IF_ADC1/Null/IF_ADC2",
"DAC_REF/IF_ADC2/IF_ADC1/Null",
"DAC_REF/IF_ADC2/Null/IF_ADC1",
"DAC_REF/Null/IF_ADC1/IF_ADC2",
"DAC_REF/Null/IF_ADC2/IF_ADC1",
"Null/IF_ADC1/IF_ADC2/DAC_REF",
"Null/IF_ADC1/DAC_REF/IF_ADC2",
"Null/IF_ADC2/IF_ADC1/DAC_REF",
"Null/IF_ADC2/DAC_REF/IF_ADC1",
"Null/DAC_REF/IF_ADC1/IF_ADC2",
"Null/DAC_REF/IF_ADC2/IF_ADC1",
};
static SOC_ENUM_SINGLE_DECL(
rt5650_if1_adc_in_enum, RT5645_TDM_CTRL_2,
0, rt5650_if1_adc_in_src);
static const struct snd_kcontrol_new rt5650_if1_adc_in_mux =
SOC_DAPM_ENUM("IF1 ADC IN source", rt5650_if1_adc_in_enum);
/* MX-78 [15:14][13:12][11:10] */
static const char * const rt5645_tdm_adc_swap_select[] = {
"L/R", "R/L", "L/L", "R/R"
};
static SOC_ENUM_SINGLE_DECL(rt5650_tdm_adc_slot0_1_enum,
RT5645_TDM_CTRL_2, 14, rt5645_tdm_adc_swap_select);
static const struct snd_kcontrol_new rt5650_if1_adc1_in_mux =
SOC_DAPM_ENUM("IF1 ADC1 IN source", rt5650_tdm_adc_slot0_1_enum);
static SOC_ENUM_SINGLE_DECL(rt5650_tdm_adc_slot2_3_enum,
RT5645_TDM_CTRL_2, 12, rt5645_tdm_adc_swap_select);
static const struct snd_kcontrol_new rt5650_if1_adc2_in_mux =
SOC_DAPM_ENUM("IF1 ADC2 IN source", rt5650_tdm_adc_slot2_3_enum);
static SOC_ENUM_SINGLE_DECL(rt5650_tdm_adc_slot4_5_enum,
RT5645_TDM_CTRL_2, 10, rt5645_tdm_adc_swap_select);
static const struct snd_kcontrol_new rt5650_if1_adc3_in_mux =
SOC_DAPM_ENUM("IF1 ADC3 IN source", rt5650_tdm_adc_slot4_5_enum);
/* MX-77 [7:6][5:4][3:2] */
static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_slot0_1_enum,
RT5645_TDM_CTRL_1, 6, rt5645_tdm_adc_swap_select);
static const struct snd_kcontrol_new rt5645_if1_adc1_in_mux =
SOC_DAPM_ENUM("IF1 ADC1 IN source", rt5645_tdm_adc_slot0_1_enum);
static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_slot2_3_enum,
RT5645_TDM_CTRL_1, 4, rt5645_tdm_adc_swap_select);
static const struct snd_kcontrol_new rt5645_if1_adc2_in_mux =
SOC_DAPM_ENUM("IF1 ADC2 IN source", rt5645_tdm_adc_slot2_3_enum);
static SOC_ENUM_SINGLE_DECL(rt5645_tdm_adc_slot4_5_enum,
RT5645_TDM_CTRL_1, 2, rt5645_tdm_adc_swap_select);
static const struct snd_kcontrol_new rt5645_if1_adc3_in_mux =
SOC_DAPM_ENUM("IF1 ADC3 IN source", rt5645_tdm_adc_slot4_5_enum);
/* MX-79 [14:12][10:8][6:4][2:0] */
static const char * const rt5645_tdm_dac_swap_select[] = {
"Slot0", "Slot1", "Slot2", "Slot3"
};
static SOC_ENUM_SINGLE_DECL(rt5645_tdm_dac0_enum,
RT5645_TDM_CTRL_3, 12, rt5645_tdm_dac_swap_select);
static const struct snd_kcontrol_new rt5645_if1_dac0_tdm_sel_mux =
SOC_DAPM_ENUM("IF1 DAC0 source", rt5645_tdm_dac0_enum);
static SOC_ENUM_SINGLE_DECL(rt5645_tdm_dac1_enum,
RT5645_TDM_CTRL_3, 8, rt5645_tdm_dac_swap_select);
static const struct snd_kcontrol_new rt5645_if1_dac1_tdm_sel_mux =
SOC_DAPM_ENUM("IF1 DAC1 source", rt5645_tdm_dac1_enum);
static SOC_ENUM_SINGLE_DECL(rt5645_tdm_dac2_enum,
RT5645_TDM_CTRL_3, 4, rt5645_tdm_dac_swap_select);
static const struct snd_kcontrol_new rt5645_if1_dac2_tdm_sel_mux =
SOC_DAPM_ENUM("IF1 DAC2 source", rt5645_tdm_dac2_enum);
static SOC_ENUM_SINGLE_DECL(rt5645_tdm_dac3_enum,
RT5645_TDM_CTRL_3, 0, rt5645_tdm_dac_swap_select);
static const struct snd_kcontrol_new rt5645_if1_dac3_tdm_sel_mux =
SOC_DAPM_ENUM("IF1 DAC3 source", rt5645_tdm_dac3_enum);
/* MX-7a [14:12][10:8][6:4][2:0] */
static SOC_ENUM_SINGLE_DECL(rt5650_tdm_dac0_enum,
RT5650_TDM_CTRL_4, 12, rt5645_tdm_dac_swap_select);
static const struct snd_kcontrol_new rt5650_if1_dac0_tdm_sel_mux =
SOC_DAPM_ENUM("IF1 DAC0 source", rt5650_tdm_dac0_enum);
static SOC_ENUM_SINGLE_DECL(rt5650_tdm_dac1_enum,
RT5650_TDM_CTRL_4, 8, rt5645_tdm_dac_swap_select);
static const struct snd_kcontrol_new rt5650_if1_dac1_tdm_sel_mux =
SOC_DAPM_ENUM("IF1 DAC1 source", rt5650_tdm_dac1_enum);
static SOC_ENUM_SINGLE_DECL(rt5650_tdm_dac2_enum,
RT5650_TDM_CTRL_4, 4, rt5645_tdm_dac_swap_select);
static const struct snd_kcontrol_new rt5650_if1_dac2_tdm_sel_mux =
SOC_DAPM_ENUM("IF1 DAC2 source", rt5650_tdm_dac2_enum);
static SOC_ENUM_SINGLE_DECL(rt5650_tdm_dac3_enum,
RT5650_TDM_CTRL_4, 0, rt5645_tdm_dac_swap_select);
static const struct snd_kcontrol_new rt5650_if1_dac3_tdm_sel_mux =
SOC_DAPM_ENUM("IF1 DAC3 source", rt5650_tdm_dac3_enum);
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
/* MX-2d [3] [2] */
static const char * const rt5650_a_dac1_src[] = {
"DAC1", "Stereo DAC Mixer"
};
static SOC_ENUM_SINGLE_DECL(
rt5650_a_dac1_l_enum, RT5650_A_DAC_SOUR,
RT5650_A_DAC1_L_IN_SFT, rt5650_a_dac1_src);
static const struct snd_kcontrol_new rt5650_a_dac1_l_mux =
SOC_DAPM_ENUM("A DAC1 L source", rt5650_a_dac1_l_enum);
static SOC_ENUM_SINGLE_DECL(
rt5650_a_dac1_r_enum, RT5650_A_DAC_SOUR,
RT5650_A_DAC1_R_IN_SFT, rt5650_a_dac1_src);
static const struct snd_kcontrol_new rt5650_a_dac1_r_mux =
SOC_DAPM_ENUM("A DAC1 R source", rt5650_a_dac1_r_enum);
/* MX-2d [1] [0] */
static const char * const rt5650_a_dac2_src[] = {
"Stereo DAC Mixer", "Mono DAC Mixer"
};
static SOC_ENUM_SINGLE_DECL(
rt5650_a_dac2_l_enum, RT5650_A_DAC_SOUR,
RT5650_A_DAC2_L_IN_SFT, rt5650_a_dac2_src);
static const struct snd_kcontrol_new rt5650_a_dac2_l_mux =
SOC_DAPM_ENUM("A DAC2 L source", rt5650_a_dac2_l_enum);
static SOC_ENUM_SINGLE_DECL(
rt5650_a_dac2_r_enum, RT5650_A_DAC_SOUR,
RT5650_A_DAC2_R_IN_SFT, rt5650_a_dac2_src);
static const struct snd_kcontrol_new rt5650_a_dac2_r_mux =
SOC_DAPM_ENUM("A DAC2 R source", rt5650_a_dac2_r_enum);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
/* MX-2F [13:12] */
static const char * const rt5645_if2_adc_in_src[] = {
"IF_ADC1", "IF_ADC2", "VAD_ADC"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_if2_adc_in_enum, RT5645_DIG_INF1_DATA,
RT5645_IF2_ADC_IN_SFT, rt5645_if2_adc_in_src);
static const struct snd_kcontrol_new rt5645_if2_adc_in_mux =
SOC_DAPM_ENUM("IF2 ADC IN source", rt5645_if2_adc_in_enum);
/* MX-31 [15] [13] [11] [9] */
static const char * const rt5645_pdm_src[] = {
"Mono DAC", "Stereo DAC"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_pdm1_l_enum, RT5645_PDM_OUT_CTRL,
RT5645_PDM1_L_SFT, rt5645_pdm_src);
static const struct snd_kcontrol_new rt5645_pdm1_l_mux =
SOC_DAPM_ENUM("PDM1 L source", rt5645_pdm1_l_enum);
static SOC_ENUM_SINGLE_DECL(
rt5645_pdm1_r_enum, RT5645_PDM_OUT_CTRL,
RT5645_PDM1_R_SFT, rt5645_pdm_src);
static const struct snd_kcontrol_new rt5645_pdm1_r_mux =
SOC_DAPM_ENUM("PDM1 R source", rt5645_pdm1_r_enum);
/* MX-9D [9:8] */
static const char * const rt5645_vad_adc_src[] = {
"Sto1 ADC L", "Mono ADC L", "Mono ADC R"
};
static SOC_ENUM_SINGLE_DECL(
rt5645_vad_adc_enum, RT5645_VAD_CTRL4,
RT5645_VAD_SEL_SFT, rt5645_vad_adc_src);
static const struct snd_kcontrol_new rt5645_vad_adc_mux =
SOC_DAPM_ENUM("VAD ADC source", rt5645_vad_adc_enum);
static const struct snd_kcontrol_new spk_l_vol_control =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5645_SPK_VOL,
RT5645_L_MUTE_SFT, 1, 1);
static const struct snd_kcontrol_new spk_r_vol_control =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5645_SPK_VOL,
RT5645_R_MUTE_SFT, 1, 1);
static const struct snd_kcontrol_new hp_l_vol_control =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5645_HP_VOL,
RT5645_L_MUTE_SFT, 1, 1);
static const struct snd_kcontrol_new hp_r_vol_control =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5645_HP_VOL,
RT5645_R_MUTE_SFT, 1, 1);
static const struct snd_kcontrol_new pdm1_l_vol_control =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5645_PDM_OUT_CTRL,
RT5645_M_PDM1_L, 1, 1);
static const struct snd_kcontrol_new pdm1_r_vol_control =
SOC_DAPM_SINGLE_AUTODISABLE("Switch", RT5645_PDM_OUT_CTRL,
RT5645_M_PDM1_R, 1, 1);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static void hp_amp_power(struct snd_soc_component *component, int on)
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{
static int hp_amp_power_count;
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Remove the redundant delay time This patch removes the redundant delay time to speed up from the cold start of headphone playback. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20201230080235.12698-1-oder_chiou@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-30 16:02:35 +08:00
int i, val;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
if (on) {
if (hp_amp_power_count <= 0) {
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
if (rt5645->codec_type == CODEC_TYPE_RT5650) {
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_DEPOP_M2, 0x3100);
snd_soc_component_write(component, RT5645_CHARGE_PUMP,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
0x0e06);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_DEPOP_M1, 0x000d);
ASoC: rt5645: Modify the headphone depop and calibration function to prevent the pop sound in the booting time Remove the original calibration function and modify the depop and calibration function to prevent the pop sound in the booting time. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-24 20:32:56 +08:00
regmap_write(rt5645->regmap, RT5645_PR_BASE +
RT5645_HP_DCC_INT1, 0x9f01);
ASoC: rt5645: Remove the redundant delay time This patch removes the redundant delay time to speed up from the cold start of headphone playback. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20201230080235.12698-1-oder_chiou@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-12-30 16:02:35 +08:00
for (i = 0; i < 20; i++) {
usleep_range(1000, 1500);
regmap_read(rt5645->regmap, RT5645_PR_BASE +
RT5645_HP_DCC_INT1, &val);
if (!(val & 0x8000))
break;
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M1,
ASoC: rt5645: Modify the headphone depop and calibration function to prevent the pop sound in the booting time Remove the original calibration function and modify the depop and calibration function to prevent the pop sound in the booting time. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-24 20:32:56 +08:00
RT5645_HP_CO_MASK, RT5645_HP_CO_EN);
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
regmap_write(rt5645->regmap, RT5645_PR_BASE +
0x3e, 0x7400);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_DEPOP_M3, 0x0737);
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
regmap_write(rt5645->regmap, RT5645_PR_BASE +
RT5645_MAMP_INT_REG2, 0xfc00);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_DEPOP_M2, 0x1140);
ASoC: rt5645: improve the depop sequences of CBJ detection This patch will improve the depop function of CBJ detection before the headphone playback when the system resumes. We also want to complete the CBJ detection in the system-level resume function. It could avoid triggering the detection at the playing state of headphones. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18 10:37:32 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
RT5645_PWR_HP_L | RT5645_PWR_HP_R,
RT5645_PWR_HP_L | RT5645_PWR_HP_R);
ASoC: rt5645: extend delay time for headphone pop noise Headphone needs enough delay time before unmuting for avoiding pop sound. We extend the delay time to make sure headphone doesn't pop. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-25 13:18:27 +08:00
msleep(90);
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
} else {
/* depop parameters */
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M2,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_DEPOP_MASK, RT5645_DEPOP_MAN);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_DEPOP_M1, 0x000d);
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
regmap_write(rt5645->regmap, RT5645_PR_BASE +
RT5645_HP_DCC_INT1, 0x9f01);
mdelay(150);
/* headphone amp power on */
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_PWR_FV1 | RT5645_PWR_FV2, 0);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_VOL,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_PWR_HV_L | RT5645_PWR_HV_R,
RT5645_PWR_HV_L | RT5645_PWR_HV_R);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_PWR_HP_L | RT5645_PWR_HP_R |
RT5645_PWR_HA,
RT5645_PWR_HP_L | RT5645_PWR_HP_R |
RT5645_PWR_HA);
mdelay(5);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_PWR_FV1 | RT5645_PWR_FV2,
RT5645_PWR_FV1 | RT5645_PWR_FV2);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_HP_CO_MASK | RT5645_HP_SG_MASK,
RT5645_HP_CO_EN | RT5645_HP_SG_EN);
regmap_write(rt5645->regmap, RT5645_PR_BASE +
0x14, 0x1aaa);
regmap_write(rt5645->regmap, RT5645_PR_BASE +
0x24, 0x0430);
}
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
}
hp_amp_power_count++;
} else {
hp_amp_power_count--;
if (hp_amp_power_count <= 0) {
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
if (rt5645->codec_type == CODEC_TYPE_RT5650) {
regmap_write(rt5645->regmap, RT5645_PR_BASE +
0x3e, 0x7400);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_DEPOP_M3, 0x0737);
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
regmap_write(rt5645->regmap, RT5645_PR_BASE +
RT5645_MAMP_INT_REG2, 0xfc00);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_DEPOP_M2, 0x1140);
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
msleep(100);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_DEPOP_M1, 0x0001);
ASoC: rt5645: improve the depop sequences of CBJ detection This patch will improve the depop function of CBJ detection before the headphone playback when the system resumes. We also want to complete the CBJ detection in the system-level resume function. It could avoid triggering the detection at the playing state of headphones. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18 10:37:32 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
RT5645_PWR_HP_L | RT5645_PWR_HP_R, 0);
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
} else {
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_HP_SG_MASK |
RT5645_HP_L_SMT_MASK |
RT5645_HP_R_SMT_MASK,
RT5645_HP_SG_DIS |
RT5645_HP_L_SMT_DIS |
RT5645_HP_R_SMT_DIS);
/* headphone amp power down */
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_DEPOP_M1, 0x0000);
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_PWR_HP_L | RT5645_PWR_HP_R |
RT5645_PWR_HA, 0);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M2,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_DEPOP_MASK, 0);
}
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
}
}
}
static int rt5645_hp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
switch (event) {
case SND_SOC_DAPM_POST_PMU:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
hp_amp_power(component, 1);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
/* headphone unmute sequence */
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
if (rt5645->codec_type == CODEC_TYPE_RT5645) {
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M3,
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
RT5645_CP_FQ1_MASK | RT5645_CP_FQ2_MASK |
RT5645_CP_FQ3_MASK,
(RT5645_CP_FQ_192_KHZ << RT5645_CP_FQ1_SFT) |
(RT5645_CP_FQ_12_KHZ << RT5645_CP_FQ2_SFT) |
(RT5645_CP_FQ_192_KHZ << RT5645_CP_FQ3_SFT));
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
regmap_write(rt5645->regmap, RT5645_PR_BASE +
RT5645_MAMP_INT_REG2, 0xfc00);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_SMT_TRIG_MASK, RT5645_SMT_TRIG_EN);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_RSTN_MASK, RT5645_RSTN_EN);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_RSTN_MASK | RT5645_HP_L_SMT_MASK |
RT5645_HP_R_SMT_MASK, RT5645_RSTN_DIS |
RT5645_HP_L_SMT_EN | RT5645_HP_R_SMT_EN);
msleep(40);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_HP_SG_MASK | RT5645_HP_L_SMT_MASK |
RT5645_HP_R_SMT_MASK, RT5645_HP_SG_DIS |
RT5645_HP_L_SMT_DIS | RT5645_HP_R_SMT_DIS);
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
}
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case SND_SOC_DAPM_PRE_PMD:
/* headphone mute sequence */
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
if (rt5645->codec_type == CODEC_TYPE_RT5645) {
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M3,
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
RT5645_CP_FQ1_MASK | RT5645_CP_FQ2_MASK |
RT5645_CP_FQ3_MASK,
(RT5645_CP_FQ_96_KHZ << RT5645_CP_FQ1_SFT) |
(RT5645_CP_FQ_12_KHZ << RT5645_CP_FQ2_SFT) |
(RT5645_CP_FQ_96_KHZ << RT5645_CP_FQ3_SFT));
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
regmap_write(rt5645->regmap, RT5645_PR_BASE +
RT5645_MAMP_INT_REG2, 0xfc00);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_HP_SG_MASK, RT5645_HP_SG_EN);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_RSTP_MASK, RT5645_RSTP_EN);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_DEPOP_M1,
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
RT5645_RSTP_MASK | RT5645_HP_L_SMT_MASK |
RT5645_HP_R_SMT_MASK, RT5645_RSTP_DIS |
RT5645_HP_L_SMT_EN | RT5645_HP_R_SMT_EN);
msleep(30);
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
hp_amp_power(component, 0);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
default:
return 0;
}
return 0;
}
static int rt5645_spk_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
switch (event) {
case SND_SOC_DAPM_POST_PMU:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
rt5645_enable_hweq(component);
snd_soc_component_update_bits(component, RT5645_PWR_DIG1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PWR_CLS_D | RT5645_PWR_CLS_D_R |
RT5645_PWR_CLS_D_L,
RT5645_PWR_CLS_D | RT5645_PWR_CLS_D_R |
RT5645_PWR_CLS_D_L);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GEN_CTRL3,
ASoC: rt5645: add sys clk detection Add system clock detection to prevent output DC from SPO. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:21 +08:00
RT5645_DET_CLK_MASK, RT5645_DET_CLK_MODE1);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case SND_SOC_DAPM_PRE_PMD:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GEN_CTRL3,
ASoC: rt5645: add sys clk detection Add system clock detection to prevent output DC from SPO. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:21 +08:00
RT5645_DET_CLK_MASK, RT5645_DET_CLK_DIS);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_EQ_CTRL2, 0);
snd_soc_component_update_bits(component, RT5645_PWR_DIG1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PWR_CLS_D | RT5645_PWR_CLS_D_R |
RT5645_PWR_CLS_D_L, 0);
break;
default:
return 0;
}
return 0;
}
static int rt5645_lout_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
switch (event) {
case SND_SOC_DAPM_POST_PMU:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
hp_amp_power(component, 1);
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PWR_LM, RT5645_PWR_LM);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_LOUT1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_L_MUTE | RT5645_R_MUTE, 0);
break;
case SND_SOC_DAPM_PRE_PMD:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_LOUT1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_L_MUTE | RT5645_R_MUTE,
RT5645_L_MUTE | RT5645_R_MUTE);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PWR_LM, 0);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
hp_amp_power(component, 0);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
default:
return 0;
}
return 0;
}
static int rt5645_bst2_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
switch (event) {
case SND_SOC_DAPM_POST_PMU:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG2,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PWR_BST2_P, RT5645_PWR_BST2_P);
break;
case SND_SOC_DAPM_PRE_PMD:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG2,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PWR_BST2_P, 0);
break;
default:
return 0;
}
return 0;
}
ASoC: rt5645: add micbias power control select. We need to set a corresponding control bit before powering micbias up. Signed-off-by: Bard Liao <bardliao@realtek.com> [hdegoede@redhat.com: Remove 2 unused variable declarations] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:02 +08:00
static int rt5645_set_micbias1_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
ASoC: rt5645: add micbias power control select. We need to set a corresponding control bit before powering micbias up. Signed-off-by: Bard Liao <bardliao@realtek.com> [hdegoede@redhat.com: Remove 2 unused variable declarations] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:02 +08:00
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GEN_CTRL2,
ASoC: rt5645: add micbias power control select. We need to set a corresponding control bit before powering micbias up. Signed-off-by: Bard Liao <bardliao@realtek.com> [hdegoede@redhat.com: Remove 2 unused variable declarations] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:02 +08:00
RT5645_MICBIAS1_POW_CTRL_SEL_MASK,
RT5645_MICBIAS1_POW_CTRL_SEL_M);
break;
case SND_SOC_DAPM_POST_PMD:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GEN_CTRL2,
ASoC: rt5645: add micbias power control select. We need to set a corresponding control bit before powering micbias up. Signed-off-by: Bard Liao <bardliao@realtek.com> [hdegoede@redhat.com: Remove 2 unused variable declarations] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:02 +08:00
RT5645_MICBIAS1_POW_CTRL_SEL_MASK,
RT5645_MICBIAS1_POW_CTRL_SEL_A);
break;
default:
return 0;
}
return 0;
}
static int rt5645_set_micbias2_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *k, int event)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
ASoC: rt5645: add micbias power control select. We need to set a corresponding control bit before powering micbias up. Signed-off-by: Bard Liao <bardliao@realtek.com> [hdegoede@redhat.com: Remove 2 unused variable declarations] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:02 +08:00
switch (event) {
case SND_SOC_DAPM_PRE_PMU:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GEN_CTRL2,
ASoC: rt5645: add micbias power control select. We need to set a corresponding control bit before powering micbias up. Signed-off-by: Bard Liao <bardliao@realtek.com> [hdegoede@redhat.com: Remove 2 unused variable declarations] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:02 +08:00
RT5645_MICBIAS2_POW_CTRL_SEL_MASK,
RT5645_MICBIAS2_POW_CTRL_SEL_M);
break;
case SND_SOC_DAPM_POST_PMD:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GEN_CTRL2,
ASoC: rt5645: add micbias power control select. We need to set a corresponding control bit before powering micbias up. Signed-off-by: Bard Liao <bardliao@realtek.com> [hdegoede@redhat.com: Remove 2 unused variable declarations] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:02 +08:00
RT5645_MICBIAS2_POW_CTRL_SEL_MASK,
RT5645_MICBIAS2_POW_CTRL_SEL_A);
break;
default:
return 0;
}
return 0;
}
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
static const struct snd_soc_dapm_widget rt5645_dapm_widgets[] = {
SND_SOC_DAPM_SUPPLY("LDO2", RT5645_PWR_MIXER,
RT5645_PWR_LDO2_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("PLL1", RT5645_PWR_ANLG2,
RT5645_PWR_PLL_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("JD Power", RT5645_PWR_ANLG2,
RT5645_PWR_JD1_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("Mic Det Power", RT5645_PWR_VOL,
RT5645_PWR_MIC_DET_BIT, 0, NULL, 0),
ASoC: rt5645: Add ASRC support This patch add ASRC support for rt5645 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 15:37:55 +08:00
/* ASRC */
SND_SOC_DAPM_SUPPLY_S("I2S1 ASRC", 1, RT5645_ASRC_1,
11, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("I2S2 ASRC", 1, RT5645_ASRC_1,
12, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("DAC STO ASRC", 1, RT5645_ASRC_1,
10, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("DAC MONO L ASRC", 1, RT5645_ASRC_1,
9, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("DAC MONO R ASRC", 1, RT5645_ASRC_1,
8, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("DMIC STO1 ASRC", 1, RT5645_ASRC_1,
7, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("DMIC MONO L ASRC", 1, RT5645_ASRC_1,
5, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("DMIC MONO R ASRC", 1, RT5645_ASRC_1,
4, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("ADC STO1 ASRC", 1, RT5645_ASRC_1,
3, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("ADC MONO L ASRC", 1, RT5645_ASRC_1,
1, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("ADC MONO R ASRC", 1, RT5645_ASRC_1,
0, 0, NULL, 0),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
/* Input Side */
/* micbias */
ASoC: rt5645: change micbias widget type to supply. Register "micbias1" and "micbias2" to supply widgets as modern drivers do. This should not cause any (new) issues for existing users of the codec, since micbias support is broken anyways. Micbias support needs the RT5645_MICBIAS?_POW_CTRL_SEL bits in the RT5645_GEN_CTRL2 register to be updated when enabled/disabled which we currently do not do. The updating of these bits will be fixed in a follow-up commit. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:01 +08:00
SND_SOC_DAPM_SUPPLY("micbias1", RT5645_PWR_ANLG2,
ASoC: rt5645: add micbias power control select. We need to set a corresponding control bit before powering micbias up. Signed-off-by: Bard Liao <bardliao@realtek.com> [hdegoede@redhat.com: Remove 2 unused variable declarations] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:02 +08:00
RT5645_PWR_MB1_BIT, 0, rt5645_set_micbias1_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
ASoC: rt5645: change micbias widget type to supply. Register "micbias1" and "micbias2" to supply widgets as modern drivers do. This should not cause any (new) issues for existing users of the codec, since micbias support is broken anyways. Micbias support needs the RT5645_MICBIAS?_POW_CTRL_SEL bits in the RT5645_GEN_CTRL2 register to be updated when enabled/disabled which we currently do not do. The updating of these bits will be fixed in a follow-up commit. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:01 +08:00
SND_SOC_DAPM_SUPPLY("micbias2", RT5645_PWR_ANLG2,
ASoC: rt5645: add micbias power control select. We need to set a corresponding control bit before powering micbias up. Signed-off-by: Bard Liao <bardliao@realtek.com> [hdegoede@redhat.com: Remove 2 unused variable declarations] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 20:39:02 +08:00
RT5645_PWR_MB2_BIT, 0, rt5645_set_micbias2_event,
SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
/* Input Lines */
SND_SOC_DAPM_INPUT("DMIC L1"),
SND_SOC_DAPM_INPUT("DMIC R1"),
SND_SOC_DAPM_INPUT("DMIC L2"),
SND_SOC_DAPM_INPUT("DMIC R2"),
SND_SOC_DAPM_INPUT("IN1P"),
SND_SOC_DAPM_INPUT("IN1N"),
SND_SOC_DAPM_INPUT("IN2P"),
SND_SOC_DAPM_INPUT("IN2N"),
SND_SOC_DAPM_INPUT("Haptic Generator"),
SND_SOC_DAPM_PGA("DMIC1", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("DMIC2", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("DMIC CLK", SND_SOC_NOPM, 0, 0,
set_dmic_clk, SND_SOC_DAPM_PRE_PMU),
SND_SOC_DAPM_SUPPLY("DMIC1 Power", RT5645_DMIC_CTRL1,
RT5645_DMIC_1_EN_SFT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("DMIC2 Power", RT5645_DMIC_CTRL1,
RT5645_DMIC_2_EN_SFT, 0, NULL, 0),
/* Boost */
SND_SOC_DAPM_PGA("BST1", RT5645_PWR_ANLG2,
RT5645_PWR_BST1_BIT, 0, NULL, 0),
SND_SOC_DAPM_PGA_E("BST2", RT5645_PWR_ANLG2,
RT5645_PWR_BST2_BIT, 0, NULL, 0, rt5645_bst2_event,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
/* Input Volume */
SND_SOC_DAPM_PGA("INL VOL", RT5645_PWR_VOL,
RT5645_PWR_IN_L_BIT, 0, NULL, 0),
SND_SOC_DAPM_PGA("INR VOL", RT5645_PWR_VOL,
RT5645_PWR_IN_R_BIT, 0, NULL, 0),
/* REC Mixer */
SND_SOC_DAPM_MIXER("RECMIXL", RT5645_PWR_MIXER, RT5645_PWR_RM_L_BIT,
0, rt5645_rec_l_mix, ARRAY_SIZE(rt5645_rec_l_mix)),
SND_SOC_DAPM_MIXER("RECMIXR", RT5645_PWR_MIXER, RT5645_PWR_RM_R_BIT,
0, rt5645_rec_r_mix, ARRAY_SIZE(rt5645_rec_r_mix)),
/* ADCs */
SND_SOC_DAPM_ADC("ADC L", NULL, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_ADC("ADC R", NULL, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_SUPPLY("ADC L power", RT5645_PWR_DIG1,
RT5645_PWR_ADC_L_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("ADC R power", RT5645_PWR_DIG1,
RT5645_PWR_ADC_R_BIT, 0, NULL, 0),
/* ADC Mux */
SND_SOC_DAPM_MUX("Stereo1 DMIC Mux", SND_SOC_NOPM, 0, 0,
&rt5645_sto1_dmic_mux),
SND_SOC_DAPM_MUX("Stereo1 ADC L2 Mux", SND_SOC_NOPM, 0, 0,
&rt5645_sto_adc2_mux),
SND_SOC_DAPM_MUX("Stereo1 ADC R2 Mux", SND_SOC_NOPM, 0, 0,
&rt5645_sto_adc2_mux),
SND_SOC_DAPM_MUX("Stereo1 ADC L1 Mux", SND_SOC_NOPM, 0, 0,
&rt5645_sto_adc1_mux),
SND_SOC_DAPM_MUX("Stereo1 ADC R1 Mux", SND_SOC_NOPM, 0, 0,
&rt5645_sto_adc1_mux),
SND_SOC_DAPM_MUX("Mono DMIC L Mux", SND_SOC_NOPM, 0, 0,
&rt5645_mono_dmic_l_mux),
SND_SOC_DAPM_MUX("Mono DMIC R Mux", SND_SOC_NOPM, 0, 0,
&rt5645_mono_dmic_r_mux),
SND_SOC_DAPM_MUX("Mono ADC L2 Mux", SND_SOC_NOPM, 0, 0,
&rt5645_mono_adc_l2_mux),
SND_SOC_DAPM_MUX("Mono ADC L1 Mux", SND_SOC_NOPM, 0, 0,
&rt5645_mono_adc_l1_mux),
SND_SOC_DAPM_MUX("Mono ADC R1 Mux", SND_SOC_NOPM, 0, 0,
&rt5645_mono_adc_r1_mux),
SND_SOC_DAPM_MUX("Mono ADC R2 Mux", SND_SOC_NOPM, 0, 0,
&rt5645_mono_adc_r2_mux),
/* ADC Mixer */
SND_SOC_DAPM_SUPPLY_S("adc stereo1 filter", 1, RT5645_PWR_DIG2,
RT5645_PWR_ADC_S1F_BIT, 0, NULL, 0),
SND_SOC_DAPM_MIXER_E("Sto1 ADC MIXL", SND_SOC_NOPM, 0, 0,
rt5645_sto1_adc_l_mix, ARRAY_SIZE(rt5645_sto1_adc_l_mix),
NULL, 0),
SND_SOC_DAPM_MIXER_E("Sto1 ADC MIXR", SND_SOC_NOPM, 0, 0,
rt5645_sto1_adc_r_mix, ARRAY_SIZE(rt5645_sto1_adc_r_mix),
NULL, 0),
SND_SOC_DAPM_SUPPLY_S("adc mono left filter", 1, RT5645_PWR_DIG2,
RT5645_PWR_ADC_MF_L_BIT, 0, NULL, 0),
SND_SOC_DAPM_MIXER_E("Mono ADC MIXL", SND_SOC_NOPM, 0, 0,
rt5645_mono_adc_l_mix, ARRAY_SIZE(rt5645_mono_adc_l_mix),
NULL, 0),
SND_SOC_DAPM_SUPPLY_S("adc mono right filter", 1, RT5645_PWR_DIG2,
RT5645_PWR_ADC_MF_R_BIT, 0, NULL, 0),
SND_SOC_DAPM_MIXER_E("Mono ADC MIXR", SND_SOC_NOPM, 0, 0,
rt5645_mono_adc_r_mix, ARRAY_SIZE(rt5645_mono_adc_r_mix),
NULL, 0),
/* ADC PGA */
SND_SOC_DAPM_PGA("Stereo1 ADC MIXL", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("Stereo1 ADC MIXR", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("Sto2 ADC LR MIX", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("VAD_ADC", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF_ADC1", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF_ADC2", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF1_ADC1", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF1_ADC2", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF1_ADC3", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF1_ADC4", SND_SOC_NOPM, 0, 0, NULL, 0),
/* IF1 2 Mux */
SND_SOC_DAPM_MUX("IF2 ADC Mux", SND_SOC_NOPM,
0, 0, &rt5645_if2_adc_in_mux),
/* Digital Interface */
SND_SOC_DAPM_SUPPLY("I2S1", RT5645_PWR_DIG1,
RT5645_PWR_I2S1_BIT, 0, NULL, 0),
ASoC: rt5645: fix add missing widget "IF1 DAC0" and "IF1 DAC3" are used in rt5645_dapm_routes but missing in rt5645_dapm_widgets. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:00 +08:00
SND_SOC_DAPM_PGA("IF1 DAC0", SND_SOC_NOPM, 0, 0, NULL, 0),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
SND_SOC_DAPM_PGA("IF1 DAC1", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF1 DAC2", SND_SOC_NOPM, 0, 0, NULL, 0),
ASoC: rt5645: fix add missing widget "IF1 DAC0" and "IF1 DAC3" are used in rt5645_dapm_routes but missing in rt5645_dapm_widgets. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:00 +08:00
SND_SOC_DAPM_PGA("IF1 DAC3", SND_SOC_NOPM, 0, 0, NULL, 0),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
SND_SOC_DAPM_PGA("IF1 ADC", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF1 ADC L", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF1 ADC R", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("I2S2", RT5645_PWR_DIG1,
RT5645_PWR_I2S2_BIT, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF2 DAC", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF2 DAC L", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF2 DAC R", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("IF2 ADC", SND_SOC_NOPM, 0, 0, NULL, 0),
/* Digital Interface Select */
SND_SOC_DAPM_MUX("VAD ADC Mux", SND_SOC_NOPM,
0, 0, &rt5645_vad_adc_mux),
/* Audio Interface */
SND_SOC_DAPM_AIF_IN("AIF1RX", "AIF1 Playback", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("AIF1TX", "AIF1 Capture", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_IN("AIF2RX", "AIF2 Playback", 0, SND_SOC_NOPM, 0, 0),
SND_SOC_DAPM_AIF_OUT("AIF2TX", "AIF2 Capture", 0, SND_SOC_NOPM, 0, 0),
/* Output Side */
/* DAC mixer before sound effect */
SND_SOC_DAPM_MIXER("DAC1 MIXL", SND_SOC_NOPM, 0, 0,
rt5645_dac_l_mix, ARRAY_SIZE(rt5645_dac_l_mix)),
SND_SOC_DAPM_MIXER("DAC1 MIXR", SND_SOC_NOPM, 0, 0,
rt5645_dac_r_mix, ARRAY_SIZE(rt5645_dac_r_mix)),
/* DAC2 channel Mux */
SND_SOC_DAPM_MUX("DAC L2 Mux", SND_SOC_NOPM, 0, 0, &rt5645_dac_l2_mux),
SND_SOC_DAPM_MUX("DAC R2 Mux", SND_SOC_NOPM, 0, 0, &rt5645_dac_r2_mux),
SND_SOC_DAPM_PGA("DAC L2 Volume", RT5645_PWR_DIG1,
RT5645_PWR_DAC_L2_BIT, 0, NULL, 0),
SND_SOC_DAPM_PGA("DAC R2 Volume", RT5645_PWR_DIG1,
RT5645_PWR_DAC_R2_BIT, 0, NULL, 0),
SND_SOC_DAPM_MUX("DAC1 L Mux", SND_SOC_NOPM, 0, 0, &rt5645_dac1l_mux),
SND_SOC_DAPM_MUX("DAC1 R Mux", SND_SOC_NOPM, 0, 0, &rt5645_dac1r_mux),
/* DAC Mixer */
SND_SOC_DAPM_SUPPLY_S("dac stereo1 filter", 1, RT5645_PWR_DIG2,
RT5645_PWR_DAC_S1F_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("dac mono left filter", 1, RT5645_PWR_DIG2,
RT5645_PWR_DAC_MF_L_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("dac mono right filter", 1, RT5645_PWR_DIG2,
RT5645_PWR_DAC_MF_R_BIT, 0, NULL, 0),
SND_SOC_DAPM_MIXER("Stereo DAC MIXL", SND_SOC_NOPM, 0, 0,
rt5645_sto_dac_l_mix, ARRAY_SIZE(rt5645_sto_dac_l_mix)),
SND_SOC_DAPM_MIXER("Stereo DAC MIXR", SND_SOC_NOPM, 0, 0,
rt5645_sto_dac_r_mix, ARRAY_SIZE(rt5645_sto_dac_r_mix)),
SND_SOC_DAPM_MIXER("Mono DAC MIXL", SND_SOC_NOPM, 0, 0,
rt5645_mono_dac_l_mix, ARRAY_SIZE(rt5645_mono_dac_l_mix)),
SND_SOC_DAPM_MIXER("Mono DAC MIXR", SND_SOC_NOPM, 0, 0,
rt5645_mono_dac_r_mix, ARRAY_SIZE(rt5645_mono_dac_r_mix)),
SND_SOC_DAPM_MIXER("DAC MIXL", SND_SOC_NOPM, 0, 0,
rt5645_dig_l_mix, ARRAY_SIZE(rt5645_dig_l_mix)),
SND_SOC_DAPM_MIXER("DAC MIXR", SND_SOC_NOPM, 0, 0,
rt5645_dig_r_mix, ARRAY_SIZE(rt5645_dig_r_mix)),
/* DACs */
SND_SOC_DAPM_DAC("DAC L1", NULL, RT5645_PWR_DIG1, RT5645_PWR_DAC_L1_BIT,
0),
SND_SOC_DAPM_DAC("DAC L2", NULL, RT5645_PWR_DIG1, RT5645_PWR_DAC_L2_BIT,
0),
SND_SOC_DAPM_DAC("DAC R1", NULL, RT5645_PWR_DIG1, RT5645_PWR_DAC_R1_BIT,
0),
SND_SOC_DAPM_DAC("DAC R2", NULL, RT5645_PWR_DIG1, RT5645_PWR_DAC_R2_BIT,
0),
/* OUT Mixer */
SND_SOC_DAPM_MIXER("SPK MIXL", RT5645_PWR_MIXER, RT5645_PWR_SM_L_BIT,
0, rt5645_spk_l_mix, ARRAY_SIZE(rt5645_spk_l_mix)),
SND_SOC_DAPM_MIXER("SPK MIXR", RT5645_PWR_MIXER, RT5645_PWR_SM_R_BIT,
0, rt5645_spk_r_mix, ARRAY_SIZE(rt5645_spk_r_mix)),
SND_SOC_DAPM_MIXER("OUT MIXL", RT5645_PWR_MIXER, RT5645_PWR_OM_L_BIT,
0, rt5645_out_l_mix, ARRAY_SIZE(rt5645_out_l_mix)),
SND_SOC_DAPM_MIXER("OUT MIXR", RT5645_PWR_MIXER, RT5645_PWR_OM_R_BIT,
0, rt5645_out_r_mix, ARRAY_SIZE(rt5645_out_r_mix)),
/* Ouput Volume */
SND_SOC_DAPM_SWITCH("SPKVOL L", RT5645_PWR_VOL, RT5645_PWR_SV_L_BIT, 0,
&spk_l_vol_control),
SND_SOC_DAPM_SWITCH("SPKVOL R", RT5645_PWR_VOL, RT5645_PWR_SV_R_BIT, 0,
&spk_r_vol_control),
SND_SOC_DAPM_MIXER("HPOVOL MIXL", RT5645_PWR_VOL, RT5645_PWR_HV_L_BIT,
0, rt5645_hpvoll_mix, ARRAY_SIZE(rt5645_hpvoll_mix)),
SND_SOC_DAPM_MIXER("HPOVOL MIXR", RT5645_PWR_VOL, RT5645_PWR_HV_R_BIT,
0, rt5645_hpvolr_mix, ARRAY_SIZE(rt5645_hpvolr_mix)),
SND_SOC_DAPM_SUPPLY("HPOVOL MIXL Power", RT5645_PWR_MIXER,
RT5645_PWR_HM_L_BIT, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("HPOVOL MIXR Power", RT5645_PWR_MIXER,
RT5645_PWR_HM_R_BIT, 0, NULL, 0),
SND_SOC_DAPM_PGA("DAC 1", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("DAC 2", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_PGA("HPOVOL", SND_SOC_NOPM, 0, 0, NULL, 0),
SND_SOC_DAPM_SWITCH("HPOVOL L", SND_SOC_NOPM, 0, 0, &hp_l_vol_control),
SND_SOC_DAPM_SWITCH("HPOVOL R", SND_SOC_NOPM, 0, 0, &hp_r_vol_control),
/* HPO/LOUT/Mono Mixer */
SND_SOC_DAPM_MIXER("SPOL MIX", SND_SOC_NOPM, 0, 0, rt5645_spo_l_mix,
ARRAY_SIZE(rt5645_spo_l_mix)),
SND_SOC_DAPM_MIXER("SPOR MIX", SND_SOC_NOPM, 0, 0, rt5645_spo_r_mix,
ARRAY_SIZE(rt5645_spo_r_mix)),
SND_SOC_DAPM_MIXER("HPO MIX", SND_SOC_NOPM, 0, 0, rt5645_hpo_mix,
ARRAY_SIZE(rt5645_hpo_mix)),
SND_SOC_DAPM_MIXER("LOUT MIX", SND_SOC_NOPM, 0, 0, rt5645_lout_mix,
ARRAY_SIZE(rt5645_lout_mix)),
SND_SOC_DAPM_PGA_S("HP amp", 1, SND_SOC_NOPM, 0, 0, rt5645_hp_event,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA_S("LOUT amp", 1, SND_SOC_NOPM, 0, 0, rt5645_lout_event,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
SND_SOC_DAPM_PGA_S("SPK amp", 2, SND_SOC_NOPM, 0, 0, rt5645_spk_event,
SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMU),
/* PDM */
SND_SOC_DAPM_SUPPLY("PDM1 Power", RT5645_PWR_DIG2, RT5645_PWR_PDM1_BIT,
0, NULL, 0),
SND_SOC_DAPM_MUX("PDM1 L Mux", SND_SOC_NOPM, 0, 0, &rt5645_pdm1_l_mux),
SND_SOC_DAPM_MUX("PDM1 R Mux", SND_SOC_NOPM, 0, 0, &rt5645_pdm1_r_mux),
SND_SOC_DAPM_SWITCH("PDM1 L", SND_SOC_NOPM, 0, 0, &pdm1_l_vol_control),
SND_SOC_DAPM_SWITCH("PDM1 R", SND_SOC_NOPM, 0, 0, &pdm1_r_vol_control),
/* Output Lines */
SND_SOC_DAPM_OUTPUT("HPOL"),
SND_SOC_DAPM_OUTPUT("HPOR"),
SND_SOC_DAPM_OUTPUT("LOUTL"),
SND_SOC_DAPM_OUTPUT("LOUTR"),
SND_SOC_DAPM_OUTPUT("PDM1L"),
SND_SOC_DAPM_OUTPUT("PDM1R"),
SND_SOC_DAPM_OUTPUT("SPOL"),
SND_SOC_DAPM_OUTPUT("SPOR"),
};
ASoC: rt5645: move RT5645 muxes to rt5645_specific_dapm_widgets This is a similar patch to "move RT5650 muxes to rt5650_specific_ dapm_widgets" patch. The purpose is to silence the "has no paths" warnings. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-29 14:20:50 +08:00
static const struct snd_soc_dapm_widget rt5645_specific_dapm_widgets[] = {
SND_SOC_DAPM_MUX("RT5645 IF1 DAC1 L Mux", SND_SOC_NOPM, 0, 0,
&rt5645_if1_dac0_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5645 IF1 DAC1 R Mux", SND_SOC_NOPM, 0, 0,
&rt5645_if1_dac1_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5645 IF1 DAC2 L Mux", SND_SOC_NOPM, 0, 0,
&rt5645_if1_dac2_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5645 IF1 DAC2 R Mux", SND_SOC_NOPM, 0, 0,
&rt5645_if1_dac3_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5645 IF1 ADC Mux", SND_SOC_NOPM,
0, 0, &rt5645_if1_adc_in_mux),
SND_SOC_DAPM_MUX("RT5645 IF1 ADC1 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5645_if1_adc1_in_mux),
SND_SOC_DAPM_MUX("RT5645 IF1 ADC2 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5645_if1_adc2_in_mux),
SND_SOC_DAPM_MUX("RT5645 IF1 ADC3 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5645_if1_adc3_in_mux),
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
};
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
static const struct snd_soc_dapm_widget rt5650_specific_dapm_widgets[] = {
SND_SOC_DAPM_MUX("A DAC1 L Mux", SND_SOC_NOPM,
0, 0, &rt5650_a_dac1_l_mux),
SND_SOC_DAPM_MUX("A DAC1 R Mux", SND_SOC_NOPM,
0, 0, &rt5650_a_dac1_r_mux),
SND_SOC_DAPM_MUX("A DAC2 L Mux", SND_SOC_NOPM,
0, 0, &rt5650_a_dac2_l_mux),
SND_SOC_DAPM_MUX("A DAC2 R Mux", SND_SOC_NOPM,
0, 0, &rt5650_a_dac2_r_mux),
ASoC: rt5645: move RT5650 muxes to rt5650_specific_dapm_widgets Developing a driver for an Asus X205TA laptop I get these dmesg errors: rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC1 Swap Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC2 Swap Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC3 Swap Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC1 L Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC1 R Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC2 L Mux has no paths rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC2 R Mux has no paths so, move these muxes to the rt5650_specific_dapm_widgets[] list. Signed-off-by: Michele Curti <michele.curti@gmail.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-15 10:44:11 +08:00
SND_SOC_DAPM_MUX("RT5650 IF1 ADC1 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc1_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC2 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc2_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC3 Swap Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc3_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 ADC Mux", SND_SOC_NOPM,
0, 0, &rt5650_if1_adc_in_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 L Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac0_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC1 R Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac1_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 L Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac2_tdm_sel_mux),
SND_SOC_DAPM_MUX("RT5650 IF1 DAC2 R Mux", SND_SOC_NOPM, 0, 0,
&rt5650_if1_dac3_tdm_sel_mux),
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
};
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
static const struct snd_soc_dapm_route rt5645_dapm_routes[] = {
ASoC: rt5645: Add ASRC support This patch add ASRC support for rt5645 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 15:37:55 +08:00
{ "adc stereo1 filter", NULL, "ADC STO1 ASRC", is_using_asrc },
{ "adc mono left filter", NULL, "ADC MONO L ASRC", is_using_asrc },
{ "adc mono right filter", NULL, "ADC MONO R ASRC", is_using_asrc },
{ "dac mono left filter", NULL, "DAC MONO L ASRC", is_using_asrc },
{ "dac mono right filter", NULL, "DAC MONO R ASRC", is_using_asrc },
{ "dac stereo1 filter", NULL, "DAC STO ASRC", is_using_asrc },
{ "I2S1", NULL, "I2S1 ASRC" },
{ "I2S2", NULL, "I2S2 ASRC" },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ "IN1P", NULL, "LDO2" },
{ "IN2P", NULL, "LDO2" },
{ "DMIC1", NULL, "DMIC L1" },
{ "DMIC1", NULL, "DMIC R1" },
{ "DMIC2", NULL, "DMIC L2" },
{ "DMIC2", NULL, "DMIC R2" },
{ "BST1", NULL, "IN1P" },
{ "BST1", NULL, "IN1N" },
{ "BST1", NULL, "JD Power" },
{ "BST1", NULL, "Mic Det Power" },
{ "BST2", NULL, "IN2P" },
{ "BST2", NULL, "IN2N" },
{ "INL VOL", NULL, "IN2P" },
{ "INR VOL", NULL, "IN2N" },
{ "RECMIXL", "HPOL Switch", "HPOL" },
{ "RECMIXL", "INL Switch", "INL VOL" },
{ "RECMIXL", "BST2 Switch", "BST2" },
{ "RECMIXL", "BST1 Switch", "BST1" },
{ "RECMIXL", "OUT MIXL Switch", "OUT MIXL" },
{ "RECMIXR", "HPOR Switch", "HPOR" },
{ "RECMIXR", "INR Switch", "INR VOL" },
{ "RECMIXR", "BST2 Switch", "BST2" },
{ "RECMIXR", "BST1 Switch", "BST1" },
{ "RECMIXR", "OUT MIXR Switch", "OUT MIXR" },
{ "ADC L", NULL, "RECMIXL" },
{ "ADC L", NULL, "ADC L power" },
{ "ADC R", NULL, "RECMIXR" },
{ "ADC R", NULL, "ADC R power" },
{"DMIC L1", NULL, "DMIC CLK"},
{"DMIC L1", NULL, "DMIC1 Power"},
{"DMIC R1", NULL, "DMIC CLK"},
{"DMIC R1", NULL, "DMIC1 Power"},
{"DMIC L2", NULL, "DMIC CLK"},
{"DMIC L2", NULL, "DMIC2 Power"},
{"DMIC R2", NULL, "DMIC CLK"},
{"DMIC R2", NULL, "DMIC2 Power"},
{ "Stereo1 DMIC Mux", "DMIC1", "DMIC1" },
{ "Stereo1 DMIC Mux", "DMIC2", "DMIC2" },
ASoC: rt5645: Add ASRC support This patch add ASRC support for rt5645 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 15:37:55 +08:00
{ "Stereo1 DMIC Mux", NULL, "DMIC STO1 ASRC" },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ "Mono DMIC L Mux", "DMIC1", "DMIC L1" },
{ "Mono DMIC L Mux", "DMIC2", "DMIC L2" },
ASoC: rt5645: Add ASRC support This patch add ASRC support for rt5645 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 15:37:55 +08:00
{ "Mono DMIC L Mux", NULL, "DMIC MONO L ASRC" },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ "Mono DMIC R Mux", "DMIC1", "DMIC R1" },
{ "Mono DMIC R Mux", "DMIC2", "DMIC R2" },
ASoC: rt5645: Add ASRC support This patch add ASRC support for rt5645 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-31 15:37:55 +08:00
{ "Mono DMIC R Mux", NULL, "DMIC MONO R ASRC" },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ "Stereo1 ADC L2 Mux", "DMIC", "Stereo1 DMIC Mux" },
{ "Stereo1 ADC L2 Mux", "DAC MIX", "DAC MIXL" },
{ "Stereo1 ADC L1 Mux", "ADC", "ADC L" },
{ "Stereo1 ADC L1 Mux", "DAC MIX", "DAC MIXL" },
{ "Stereo1 ADC R1 Mux", "ADC", "ADC R" },
{ "Stereo1 ADC R1 Mux", "DAC MIX", "DAC MIXR" },
{ "Stereo1 ADC R2 Mux", "DMIC", "Stereo1 DMIC Mux" },
{ "Stereo1 ADC R2 Mux", "DAC MIX", "DAC MIXR" },
{ "Mono ADC L2 Mux", "DMIC", "Mono DMIC L Mux" },
{ "Mono ADC L2 Mux", "Mono DAC MIXL", "Mono DAC MIXL" },
{ "Mono ADC L1 Mux", "Mono DAC MIXL", "Mono DAC MIXL" },
{ "Mono ADC L1 Mux", "ADC", "ADC L" },
{ "Mono ADC R1 Mux", "Mono DAC MIXR", "Mono DAC MIXR" },
{ "Mono ADC R1 Mux", "ADC", "ADC R" },
{ "Mono ADC R2 Mux", "DMIC", "Mono DMIC R Mux" },
{ "Mono ADC R2 Mux", "Mono DAC MIXR", "Mono DAC MIXR" },
{ "Sto1 ADC MIXL", "ADC1 Switch", "Stereo1 ADC L1 Mux" },
{ "Sto1 ADC MIXL", "ADC2 Switch", "Stereo1 ADC L2 Mux" },
{ "Sto1 ADC MIXR", "ADC1 Switch", "Stereo1 ADC R1 Mux" },
{ "Sto1 ADC MIXR", "ADC2 Switch", "Stereo1 ADC R2 Mux" },
{ "Stereo1 ADC MIXL", NULL, "Sto1 ADC MIXL" },
{ "Stereo1 ADC MIXL", NULL, "adc stereo1 filter" },
{ "adc stereo1 filter", NULL, "PLL1", is_sys_clk_from_pll },
{ "Stereo1 ADC MIXR", NULL, "Sto1 ADC MIXR" },
{ "Stereo1 ADC MIXR", NULL, "adc stereo1 filter" },
{ "adc stereo1 filter", NULL, "PLL1", is_sys_clk_from_pll },
{ "Mono ADC MIXL", "ADC1 Switch", "Mono ADC L1 Mux" },
{ "Mono ADC MIXL", "ADC2 Switch", "Mono ADC L2 Mux" },
{ "Mono ADC MIXL", NULL, "adc mono left filter" },
{ "adc mono left filter", NULL, "PLL1", is_sys_clk_from_pll },
{ "Mono ADC MIXR", "ADC1 Switch", "Mono ADC R1 Mux" },
{ "Mono ADC MIXR", "ADC2 Switch", "Mono ADC R2 Mux" },
{ "Mono ADC MIXR", NULL, "adc mono right filter" },
{ "adc mono right filter", NULL, "PLL1", is_sys_clk_from_pll },
{ "VAD ADC Mux", "Sto1 ADC L", "Stereo1 ADC MIXL" },
{ "VAD ADC Mux", "Mono ADC L", "Mono ADC MIXL" },
{ "VAD ADC Mux", "Mono ADC R", "Mono ADC MIXR" },
{ "IF_ADC1", NULL, "Stereo1 ADC MIXL" },
{ "IF_ADC1", NULL, "Stereo1 ADC MIXR" },
{ "IF_ADC2", NULL, "Mono ADC MIXL" },
{ "IF_ADC2", NULL, "Mono ADC MIXR" },
{ "VAD_ADC", NULL, "VAD ADC Mux" },
{ "IF2 ADC Mux", "IF_ADC1", "IF_ADC1" },
{ "IF2 ADC Mux", "IF_ADC2", "IF_ADC2" },
{ "IF2 ADC Mux", "VAD_ADC", "VAD_ADC" },
{ "IF1 ADC", NULL, "I2S1" },
{ "IF2 ADC", NULL, "I2S2" },
{ "IF2 ADC", NULL, "IF2 ADC Mux" },
{ "AIF2TX", NULL, "IF2 ADC" },
ASoC: rt5645: add TDM slot control into dapm route This patch adds TDM slot control into dapm route. The control bits are different between rt5645 and rt5650, so we have separate dapm routes for each codec. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:44 +08:00
{ "IF1 DAC0", NULL, "AIF1RX" },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ "IF1 DAC1", NULL, "AIF1RX" },
{ "IF1 DAC2", NULL, "AIF1RX" },
ASoC: rt5645: add TDM slot control into dapm route This patch adds TDM slot control into dapm route. The control bits are different between rt5645 and rt5650, so we have separate dapm routes for each codec. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:44 +08:00
{ "IF1 DAC3", NULL, "AIF1RX" },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ "IF2 DAC", NULL, "AIF2RX" },
ASoC: rt5645: add TDM slot control into dapm route This patch adds TDM slot control into dapm route. The control bits are different between rt5645 and rt5650, so we have separate dapm routes for each codec. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:44 +08:00
{ "IF1 DAC0", NULL, "I2S1" },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ "IF1 DAC1", NULL, "I2S1" },
{ "IF1 DAC2", NULL, "I2S1" },
ASoC: rt5645: add TDM slot control into dapm route This patch adds TDM slot control into dapm route. The control bits are different between rt5645 and rt5650, so we have separate dapm routes for each codec. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:44 +08:00
{ "IF1 DAC3", NULL, "I2S1" },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ "IF2 DAC", NULL, "I2S2" },
{ "IF2 DAC L", NULL, "IF2 DAC" },
{ "IF2 DAC R", NULL, "IF2 DAC" },
{ "DAC1 L Mux", "IF2 DAC", "IF2 DAC L" },
{ "DAC1 R Mux", "IF2 DAC", "IF2 DAC R" },
{ "DAC1 MIXL", "Stereo ADC Switch", "Stereo1 ADC MIXL" },
{ "DAC1 MIXL", "DAC1 Switch", "DAC1 L Mux" },
{ "DAC1 MIXL", NULL, "dac stereo1 filter" },
{ "DAC1 MIXR", "Stereo ADC Switch", "Stereo1 ADC MIXR" },
{ "DAC1 MIXR", "DAC1 Switch", "DAC1 R Mux" },
{ "DAC1 MIXR", NULL, "dac stereo1 filter" },
{ "DAC L2 Mux", "IF2 DAC", "IF2 DAC L" },
{ "DAC L2 Mux", "Mono ADC", "Mono ADC MIXL" },
{ "DAC L2 Mux", "VAD_ADC", "VAD_ADC" },
{ "DAC L2 Volume", NULL, "DAC L2 Mux" },
{ "DAC L2 Volume", NULL, "dac mono left filter" },
{ "DAC R2 Mux", "IF2 DAC", "IF2 DAC R" },
{ "DAC R2 Mux", "Mono ADC", "Mono ADC MIXR" },
{ "DAC R2 Mux", "Haptic", "Haptic Generator" },
{ "DAC R2 Volume", NULL, "DAC R2 Mux" },
{ "DAC R2 Volume", NULL, "dac mono right filter" },
{ "Stereo DAC MIXL", "DAC L1 Switch", "DAC1 MIXL" },
{ "Stereo DAC MIXL", "DAC R1 Switch", "DAC1 MIXR" },
{ "Stereo DAC MIXL", "DAC L2 Switch", "DAC L2 Volume" },
{ "Stereo DAC MIXL", NULL, "dac stereo1 filter" },
{ "Stereo DAC MIXR", "DAC R1 Switch", "DAC1 MIXR" },
{ "Stereo DAC MIXR", "DAC L1 Switch", "DAC1 MIXL" },
{ "Stereo DAC MIXR", "DAC R2 Switch", "DAC R2 Volume" },
{ "Stereo DAC MIXR", NULL, "dac stereo1 filter" },
{ "Mono DAC MIXL", "DAC L1 Switch", "DAC1 MIXL" },
{ "Mono DAC MIXL", "DAC L2 Switch", "DAC L2 Volume" },
{ "Mono DAC MIXL", "DAC R2 Switch", "DAC R2 Volume" },
{ "Mono DAC MIXL", NULL, "dac mono left filter" },
{ "Mono DAC MIXR", "DAC R1 Switch", "DAC1 MIXR" },
{ "Mono DAC MIXR", "DAC R2 Switch", "DAC R2 Volume" },
{ "Mono DAC MIXR", "DAC L2 Switch", "DAC L2 Volume" },
{ "Mono DAC MIXR", NULL, "dac mono right filter" },
{ "DAC MIXL", "Sto DAC Mix L Switch", "Stereo DAC MIXL" },
{ "DAC MIXL", "DAC L2 Switch", "DAC L2 Volume" },
{ "DAC MIXL", "DAC R2 Switch", "DAC R2 Volume" },
{ "DAC MIXR", "Sto DAC Mix R Switch", "Stereo DAC MIXR" },
{ "DAC MIXR", "DAC R2 Switch", "DAC R2 Volume" },
{ "DAC MIXR", "DAC L2 Switch", "DAC L2 Volume" },
{ "DAC L1", NULL, "PLL1", is_sys_clk_from_pll },
{ "DAC R1", NULL, "PLL1", is_sys_clk_from_pll },
{ "DAC L2", NULL, "PLL1", is_sys_clk_from_pll },
{ "DAC R2", NULL, "PLL1", is_sys_clk_from_pll },
{ "SPK MIXL", "BST1 Switch", "BST1" },
{ "SPK MIXL", "INL Switch", "INL VOL" },
{ "SPK MIXL", "DAC L1 Switch", "DAC L1" },
{ "SPK MIXL", "DAC L2 Switch", "DAC L2" },
{ "SPK MIXR", "BST2 Switch", "BST2" },
{ "SPK MIXR", "INR Switch", "INR VOL" },
{ "SPK MIXR", "DAC R1 Switch", "DAC R1" },
{ "SPK MIXR", "DAC R2 Switch", "DAC R2" },
{ "OUT MIXL", "BST1 Switch", "BST1" },
{ "OUT MIXL", "INL Switch", "INL VOL" },
{ "OUT MIXL", "DAC L2 Switch", "DAC L2" },
{ "OUT MIXL", "DAC L1 Switch", "DAC L1" },
{ "OUT MIXR", "BST2 Switch", "BST2" },
{ "OUT MIXR", "INR Switch", "INR VOL" },
{ "OUT MIXR", "DAC R2 Switch", "DAC R2" },
{ "OUT MIXR", "DAC R1 Switch", "DAC R1" },
{ "HPOVOL MIXL", "DAC1 Switch", "DAC L1" },
{ "HPOVOL MIXL", "DAC2 Switch", "DAC L2" },
{ "HPOVOL MIXL", "INL Switch", "INL VOL" },
{ "HPOVOL MIXL", "BST1 Switch", "BST1" },
{ "HPOVOL MIXL", NULL, "HPOVOL MIXL Power" },
{ "HPOVOL MIXR", "DAC1 Switch", "DAC R1" },
{ "HPOVOL MIXR", "DAC2 Switch", "DAC R2" },
{ "HPOVOL MIXR", "INR Switch", "INR VOL" },
{ "HPOVOL MIXR", "BST2 Switch", "BST2" },
{ "HPOVOL MIXR", NULL, "HPOVOL MIXR Power" },
{ "DAC 2", NULL, "DAC L2" },
{ "DAC 2", NULL, "DAC R2" },
{ "DAC 1", NULL, "DAC L1" },
{ "DAC 1", NULL, "DAC R1" },
{ "HPOVOL L", "Switch", "HPOVOL MIXL" },
{ "HPOVOL R", "Switch", "HPOVOL MIXR" },
{ "HPOVOL", NULL, "HPOVOL L" },
{ "HPOVOL", NULL, "HPOVOL R" },
{ "HPO MIX", "DAC1 Switch", "DAC 1" },
{ "HPO MIX", "HPVOL Switch", "HPOVOL" },
{ "SPKVOL L", "Switch", "SPK MIXL" },
{ "SPKVOL R", "Switch", "SPK MIXR" },
{ "SPOL MIX", "DAC L1 Switch", "DAC L1" },
{ "SPOL MIX", "SPKVOL L Switch", "SPKVOL L" },
{ "SPOR MIX", "DAC R1 Switch", "DAC R1" },
{ "SPOR MIX", "SPKVOL R Switch", "SPKVOL R" },
{ "LOUT MIX", "DAC L1 Switch", "DAC L1" },
{ "LOUT MIX", "DAC R1 Switch", "DAC R1" },
{ "LOUT MIX", "OUTMIX L Switch", "OUT MIXL" },
{ "LOUT MIX", "OUTMIX R Switch", "OUT MIXR" },
{ "PDM1 L Mux", "Stereo DAC", "Stereo DAC MIXL" },
{ "PDM1 L Mux", "Mono DAC", "Mono DAC MIXL" },
{ "PDM1 L Mux", NULL, "PDM1 Power" },
{ "PDM1 R Mux", "Stereo DAC", "Stereo DAC MIXR" },
{ "PDM1 R Mux", "Mono DAC", "Mono DAC MIXR" },
{ "PDM1 R Mux", NULL, "PDM1 Power" },
{ "HP amp", NULL, "HPO MIX" },
{ "HP amp", NULL, "JD Power" },
{ "HP amp", NULL, "Mic Det Power" },
{ "HP amp", NULL, "LDO2" },
{ "HPOL", NULL, "HP amp" },
{ "HPOR", NULL, "HP amp" },
{ "LOUT amp", NULL, "LOUT MIX" },
{ "LOUTL", NULL, "LOUT amp" },
{ "LOUTR", NULL, "LOUT amp" },
{ "PDM1 L", "Switch", "PDM1 L Mux" },
{ "PDM1 R", "Switch", "PDM1 R Mux" },
{ "PDM1L", NULL, "PDM1 L" },
{ "PDM1R", NULL, "PDM1 R" },
{ "SPK amp", NULL, "SPOL MIX" },
{ "SPK amp", NULL, "SPOR MIX" },
{ "SPOL", NULL, "SPK amp" },
{ "SPOR", NULL, "SPK amp" },
};
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
static const struct snd_soc_dapm_route rt5650_specific_dapm_routes[] = {
{ "A DAC1 L Mux", "DAC1", "DAC1 MIXL"},
{ "A DAC1 L Mux", "Stereo DAC Mixer", "Stereo DAC MIXL"},
{ "A DAC1 R Mux", "DAC1", "DAC1 MIXR"},
{ "A DAC1 R Mux", "Stereo DAC Mixer", "Stereo DAC MIXR"},
{ "A DAC2 L Mux", "Stereo DAC Mixer", "Stereo DAC MIXL"},
{ "A DAC2 L Mux", "Mono DAC Mixer", "Mono DAC MIXL"},
{ "A DAC2 R Mux", "Stereo DAC Mixer", "Stereo DAC MIXR"},
{ "A DAC2 R Mux", "Mono DAC Mixer", "Mono DAC MIXR"},
{ "DAC L1", NULL, "A DAC1 L Mux" },
{ "DAC R1", NULL, "A DAC1 R Mux" },
{ "DAC L2", NULL, "A DAC2 L Mux" },
{ "DAC R2", NULL, "A DAC2 R Mux" },
ASoC: rt5645: add TDM slot control into dapm route This patch adds TDM slot control into dapm route. The control bits are different between rt5645 and rt5650, so we have separate dapm routes for each codec. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:44 +08:00
{ "RT5650 IF1 ADC1 Swap Mux", "L/R", "IF_ADC1" },
{ "RT5650 IF1 ADC1 Swap Mux", "R/L", "IF_ADC1" },
{ "RT5650 IF1 ADC1 Swap Mux", "L/L", "IF_ADC1" },
{ "RT5650 IF1 ADC1 Swap Mux", "R/R", "IF_ADC1" },
{ "RT5650 IF1 ADC2 Swap Mux", "L/R", "IF_ADC2" },
{ "RT5650 IF1 ADC2 Swap Mux", "R/L", "IF_ADC2" },
{ "RT5650 IF1 ADC2 Swap Mux", "L/L", "IF_ADC2" },
{ "RT5650 IF1 ADC2 Swap Mux", "R/R", "IF_ADC2" },
{ "RT5650 IF1 ADC3 Swap Mux", "L/R", "VAD_ADC" },
{ "RT5650 IF1 ADC3 Swap Mux", "R/L", "VAD_ADC" },
{ "RT5650 IF1 ADC3 Swap Mux", "L/L", "VAD_ADC" },
{ "RT5650 IF1 ADC3 Swap Mux", "R/R", "VAD_ADC" },
{ "IF1 ADC", NULL, "RT5650 IF1 ADC1 Swap Mux" },
{ "IF1 ADC", NULL, "RT5650 IF1 ADC2 Swap Mux" },
{ "IF1 ADC", NULL, "RT5650 IF1 ADC3 Swap Mux" },
{ "RT5650 IF1 ADC Mux", "IF_ADC1/IF_ADC2/DAC_REF/Null", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC1/IF_ADC2/Null/DAC_REF", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC1/DAC_REF/IF_ADC2/Null", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC1/DAC_REF/Null/IF_ADC2", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC1/Null/DAC_REF/IF_ADC2", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC1/Null/IF_ADC2/DAC_REF", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC2/IF_ADC1/DAC_REF/Null", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC2/IF_ADC1/Null/DAC_REF", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC2/DAC_REF/IF_ADC1/Null", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC2/DAC_REF/Null/IF_ADC1", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC2/Null/DAC_REF/IF_ADC1", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "IF_ADC2/Null/IF_ADC1/DAC_REF", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "DAC_REF/IF_ADC1/IF_ADC2/Null", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "DAC_REF/IF_ADC1/Null/IF_ADC2", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "DAC_REF/IF_ADC2/IF_ADC1/Null", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "DAC_REF/IF_ADC2/Null/IF_ADC1", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "DAC_REF/Null/IF_ADC1/IF_ADC2", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "DAC_REF/Null/IF_ADC2/IF_ADC1", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "Null/IF_ADC1/IF_ADC2/DAC_REF", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "Null/IF_ADC1/DAC_REF/IF_ADC2", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "Null/IF_ADC2/IF_ADC1/DAC_REF", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "Null/IF_ADC2/DAC_REF/IF_ADC1", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "Null/DAC_REF/IF_ADC1/IF_ADC2", "IF1 ADC" },
{ "RT5650 IF1 ADC Mux", "Null/DAC_REF/IF_ADC2/IF_ADC1", "IF1 ADC" },
{ "AIF1TX", NULL, "RT5650 IF1 ADC Mux" },
{ "RT5650 IF1 DAC1 L Mux", "Slot0", "IF1 DAC0" },
{ "RT5650 IF1 DAC1 L Mux", "Slot1", "IF1 DAC1" },
{ "RT5650 IF1 DAC1 L Mux", "Slot2", "IF1 DAC2" },
{ "RT5650 IF1 DAC1 L Mux", "Slot3", "IF1 DAC3" },
{ "RT5650 IF1 DAC1 R Mux", "Slot0", "IF1 DAC0" },
{ "RT5650 IF1 DAC1 R Mux", "Slot1", "IF1 DAC1" },
{ "RT5650 IF1 DAC1 R Mux", "Slot2", "IF1 DAC2" },
{ "RT5650 IF1 DAC1 R Mux", "Slot3", "IF1 DAC3" },
{ "RT5650 IF1 DAC2 L Mux", "Slot0", "IF1 DAC0" },
{ "RT5650 IF1 DAC2 L Mux", "Slot1", "IF1 DAC1" },
{ "RT5650 IF1 DAC2 L Mux", "Slot2", "IF1 DAC2" },
{ "RT5650 IF1 DAC2 L Mux", "Slot3", "IF1 DAC3" },
{ "RT5650 IF1 DAC2 R Mux", "Slot0", "IF1 DAC0" },
{ "RT5650 IF1 DAC2 R Mux", "Slot1", "IF1 DAC1" },
{ "RT5650 IF1 DAC2 R Mux", "Slot2", "IF1 DAC2" },
{ "RT5650 IF1 DAC2 R Mux", "Slot3", "IF1 DAC3" },
{ "DAC1 L Mux", "IF1 DAC", "RT5650 IF1 DAC1 L Mux" },
{ "DAC1 R Mux", "IF1 DAC", "RT5650 IF1 DAC1 R Mux" },
{ "DAC L2 Mux", "IF1 DAC", "RT5650 IF1 DAC2 L Mux" },
{ "DAC R2 Mux", "IF1 DAC", "RT5650 IF1 DAC2 R Mux" },
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
};
static const struct snd_soc_dapm_route rt5645_specific_dapm_routes[] = {
{ "DAC L1", NULL, "Stereo DAC MIXL" },
{ "DAC R1", NULL, "Stereo DAC MIXR" },
{ "DAC L2", NULL, "Mono DAC MIXL" },
{ "DAC R2", NULL, "Mono DAC MIXR" },
ASoC: rt5645: add TDM slot control into dapm route This patch adds TDM slot control into dapm route. The control bits are different between rt5645 and rt5650, so we have separate dapm routes for each codec. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:44 +08:00
{ "RT5645 IF1 ADC1 Swap Mux", "L/R", "IF_ADC1" },
{ "RT5645 IF1 ADC1 Swap Mux", "R/L", "IF_ADC1" },
{ "RT5645 IF1 ADC1 Swap Mux", "L/L", "IF_ADC1" },
{ "RT5645 IF1 ADC1 Swap Mux", "R/R", "IF_ADC1" },
{ "RT5645 IF1 ADC2 Swap Mux", "L/R", "IF_ADC2" },
{ "RT5645 IF1 ADC2 Swap Mux", "R/L", "IF_ADC2" },
{ "RT5645 IF1 ADC2 Swap Mux", "L/L", "IF_ADC2" },
{ "RT5645 IF1 ADC2 Swap Mux", "R/R", "IF_ADC2" },
{ "RT5645 IF1 ADC3 Swap Mux", "L/R", "VAD_ADC" },
{ "RT5645 IF1 ADC3 Swap Mux", "R/L", "VAD_ADC" },
{ "RT5645 IF1 ADC3 Swap Mux", "L/L", "VAD_ADC" },
{ "RT5645 IF1 ADC3 Swap Mux", "R/R", "VAD_ADC" },
{ "IF1 ADC", NULL, "RT5645 IF1 ADC1 Swap Mux" },
{ "IF1 ADC", NULL, "RT5645 IF1 ADC2 Swap Mux" },
{ "IF1 ADC", NULL, "RT5645 IF1 ADC3 Swap Mux" },
{ "RT5645 IF1 ADC Mux", "IF_ADC1/IF_ADC2/VAD_ADC", "IF1 ADC" },
{ "RT5645 IF1 ADC Mux", "IF_ADC2/IF_ADC1/VAD_ADC", "IF1 ADC" },
{ "RT5645 IF1 ADC Mux", "VAD_ADC/IF_ADC1/IF_ADC2", "IF1 ADC" },
{ "RT5645 IF1 ADC Mux", "VAD_ADC/IF_ADC2/IF_ADC1", "IF1 ADC" },
{ "AIF1TX", NULL, "RT5645 IF1 ADC Mux" },
{ "RT5645 IF1 DAC1 L Mux", "Slot0", "IF1 DAC0" },
{ "RT5645 IF1 DAC1 L Mux", "Slot1", "IF1 DAC1" },
{ "RT5645 IF1 DAC1 L Mux", "Slot2", "IF1 DAC2" },
{ "RT5645 IF1 DAC1 L Mux", "Slot3", "IF1 DAC3" },
{ "RT5645 IF1 DAC1 R Mux", "Slot0", "IF1 DAC0" },
{ "RT5645 IF1 DAC1 R Mux", "Slot1", "IF1 DAC1" },
{ "RT5645 IF1 DAC1 R Mux", "Slot2", "IF1 DAC2" },
{ "RT5645 IF1 DAC1 R Mux", "Slot3", "IF1 DAC3" },
{ "RT5645 IF1 DAC2 L Mux", "Slot0", "IF1 DAC0" },
{ "RT5645 IF1 DAC2 L Mux", "Slot1", "IF1 DAC1" },
{ "RT5645 IF1 DAC2 L Mux", "Slot2", "IF1 DAC2" },
{ "RT5645 IF1 DAC2 L Mux", "Slot3", "IF1 DAC3" },
{ "RT5645 IF1 DAC2 R Mux", "Slot0", "IF1 DAC0" },
{ "RT5645 IF1 DAC2 R Mux", "Slot1", "IF1 DAC1" },
{ "RT5645 IF1 DAC2 R Mux", "Slot2", "IF1 DAC2" },
{ "RT5645 IF1 DAC2 R Mux", "Slot3", "IF1 DAC3" },
{ "DAC1 L Mux", "IF1 DAC", "RT5645 IF1 DAC1 L Mux" },
{ "DAC1 R Mux", "IF1 DAC", "RT5645 IF1 DAC1 R Mux" },
{ "DAC L2 Mux", "IF1 DAC", "RT5645 IF1 DAC2 L Mux" },
{ "DAC R2 Mux", "IF1 DAC", "RT5645 IF1 DAC2 R Mux" },
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
};
ASoC: rt5645: remove unexisting route on new rt5645 "SPOL MIX DAC R1 Switch" and "SPOL MIX SPKVOL R Switch" are only exist in the early version of rt5645. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-30 15:26:05 +08:00
static const struct snd_soc_dapm_route rt5645_old_dapm_routes[] = {
{ "SPOL MIX", "DAC R1 Switch", "DAC R1" },
{ "SPOL MIX", "SPKVOL R Switch", "SPKVOL R" },
};
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
static int rt5645_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params, struct snd_soc_dai *dai)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = dai->component;
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
unsigned int val_len = 0, val_clk, mask_clk, dl_sft;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
int pre_div, bclk_ms, frame_size;
rt5645->lrck[dai->id] = params_rate(params);
ASoC: rt5640: Add the function "get_clk_info" to RL6231 shared support The patch adds the function "get_clk_info" to RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-20 15:01:55 +08:00
pre_div = rl6231_get_clk_info(rt5645->sysclk, rt5645->lrck[dai->id]);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
if (pre_div < 0) {
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_err(component->dev, "Unsupported clock setting\n");
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
return -EINVAL;
}
frame_size = snd_soc_params_to_frame_size(params);
if (frame_size < 0) {
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_err(component->dev, "Unsupported frame size: %d\n", frame_size);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
return -EINVAL;
}
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
switch (rt5645->codec_type) {
case CODEC_TYPE_RT5650:
dl_sft = 4;
break;
default:
dl_sft = 2;
break;
}
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
bclk_ms = frame_size > 32;
rt5645->bclk[dai->id] = rt5645->lrck[dai->id] * (32 << bclk_ms);
dev_dbg(dai->dev, "bclk is %dHz and lrck is %dHz\n",
rt5645->bclk[dai->id], rt5645->lrck[dai->id]);
dev_dbg(dai->dev, "bclk_ms is %d and pre_div is %d for iis %d\n",
bclk_ms, pre_div, dai->id);
switch (params_width(params)) {
case 16:
break;
case 20:
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
val_len = 0x1;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case 24:
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
val_len = 0x2;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case 8:
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
val_len = 0x3;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
default:
return -EINVAL;
}
switch (dai->id) {
case RT5645_AIF1:
ASoC: rt5645: remove RT5645_I2S_BCLK_MS1 control RT5645_I2S_BCLK_MS1 (reg 0x73 [5]) is reserverd in rt5645 and rt5650. This function is move to TDM control. We can configure it by snd_soc_dai_set_tdm_slot's slot_width parameter. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:42 +08:00
mask_clk = RT5645_I2S_PD1_MASK;
val_clk = pre_div << RT5645_I2S_PD1_SFT;
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_I2S1_SDP,
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
(0x3 << dl_sft), (val_len << dl_sft));
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_ADDA_CLK1, mask_clk, val_clk);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case RT5645_AIF2:
mask_clk = RT5645_I2S_BCLK_MS2_MASK | RT5645_I2S_PD2_MASK;
val_clk = bclk_ms << RT5645_I2S_BCLK_MS2_SFT |
pre_div << RT5645_I2S_PD2_SFT;
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_I2S2_SDP,
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
(0x3 << dl_sft), (val_len << dl_sft));
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_ADDA_CLK1, mask_clk, val_clk);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
default:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_err(component->dev, "Invalid dai->id: %d\n", dai->id);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
return -EINVAL;
}
return 0;
}
static int rt5645_set_dai_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = dai->component;
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
unsigned int reg_val = 0, pol_sft;
switch (rt5645->codec_type) {
case CODEC_TYPE_RT5650:
pol_sft = 8;
break;
default:
pol_sft = 7;
break;
}
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
rt5645->master[dai->id] = 1;
break;
case SND_SOC_DAIFMT_CBS_CFS:
reg_val |= RT5645_I2S_MS_S;
rt5645->master[dai->id] = 0;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_IB_NF:
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
reg_val |= (1 << pol_sft);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
break;
case SND_SOC_DAIFMT_LEFT_J:
reg_val |= RT5645_I2S_DF_LEFT;
break;
case SND_SOC_DAIFMT_DSP_A:
reg_val |= RT5645_I2S_DF_PCM_A;
break;
case SND_SOC_DAIFMT_DSP_B:
reg_val |= RT5645_I2S_DF_PCM_B;
break;
default:
return -EINVAL;
}
switch (dai->id) {
case RT5645_AIF1:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_I2S1_SDP,
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
RT5645_I2S_MS_MASK | (1 << pol_sft) |
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_I2S_DF_MASK, reg_val);
break;
ASoC: rt5645: Fix updating wrong register for T5645_AIF2 case This looks like a copy-paste bug, fix it. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-17 19:17:32 +08:00
case RT5645_AIF2:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_I2S2_SDP,
ASoC: rt5645: Redefine format config for rt5650 rt5650 and rt5645 use different register bits for format configuration. This patch modifies rt5645_hw_params and rt5645_set_dai_fmt to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-27 20:19:06 +08:00
RT5645_I2S_MS_MASK | (1 << pol_sft) |
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_I2S_DF_MASK, reg_val);
break;
default:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_err(component->dev, "Invalid dai->id: %d\n", dai->id);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
return -EINVAL;
}
return 0;
}
static int rt5645_set_dai_sysclk(struct snd_soc_dai *dai,
int clk_id, unsigned int freq, int dir)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = dai->component;
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
unsigned int reg_val = 0;
if (freq == rt5645->sysclk && clk_id == rt5645->sysclk_src)
return 0;
switch (clk_id) {
case RT5645_SCLK_S_MCLK:
reg_val |= RT5645_SCLK_SRC_MCLK;
break;
case RT5645_SCLK_S_PLL1:
reg_val |= RT5645_SCLK_SRC_PLL1;
break;
case RT5645_SCLK_S_RCCLK:
reg_val |= RT5645_SCLK_SRC_RCCLK;
break;
default:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_err(component->dev, "Invalid clock id (%d)\n", clk_id);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
return -EINVAL;
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GLB_CLK,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_SCLK_SRC_MASK, reg_val);
rt5645->sysclk = freq;
rt5645->sysclk_src = clk_id;
dev_dbg(dai->dev, "Sysclk is %dHz and clock id is %d\n", freq, clk_id);
return 0;
}
static int rt5645_set_dai_pll(struct snd_soc_dai *dai, int pll_id, int source,
unsigned int freq_in, unsigned int freq_out)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = dai->component;
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support The patch adds the function of the PLL clock calculation to RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-20 15:01:54 +08:00
struct rl6231_pll_code pll_code;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
int ret;
if (source == rt5645->pll_src && freq_in == rt5645->pll_in &&
freq_out == rt5645->pll_out)
return 0;
if (!freq_in || !freq_out) {
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_dbg(component->dev, "PLL disabled\n");
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
rt5645->pll_in = 0;
rt5645->pll_out = 0;
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GLB_CLK,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_SCLK_SRC_MASK, RT5645_SCLK_SRC_MCLK);
return 0;
}
switch (source) {
case RT5645_PLL1_S_MCLK:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GLB_CLK,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PLL1_SRC_MASK, RT5645_PLL1_SRC_MCLK);
break;
case RT5645_PLL1_S_BCLK1:
case RT5645_PLL1_S_BCLK2:
switch (dai->id) {
case RT5645_AIF1:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GLB_CLK,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PLL1_SRC_MASK, RT5645_PLL1_SRC_BCLK1);
break;
case RT5645_AIF2:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GLB_CLK,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PLL1_SRC_MASK, RT5645_PLL1_SRC_BCLK2);
break;
default:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_err(component->dev, "Invalid dai->id: %d\n", dai->id);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
return -EINVAL;
}
break;
default:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_err(component->dev, "Unknown PLL source %d\n", source);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
return -EINVAL;
}
ASoC: rt5640: Add the function of the PLL clock calculation to RL6231 shared support The patch adds the function of the PLL clock calculation to RL6231 shared support. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-20 15:01:54 +08:00
ret = rl6231_pll_calc(freq_in, freq_out, &pll_code);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
if (ret < 0) {
ASoC: codecs: Fix spelling mistake "Unsupport" -> "Unsupported" There are spelling mistakes in dev_err error messages. Fix them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210924231003.144502-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-09-25 07:10:03 +08:00
dev_err(component->dev, "Unsupported input clock %d\n", freq_in);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
return ret;
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_dbg(component->dev, "bypass=%d m=%d n=%d k=%d\n",
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
pll_code.m_bp, (pll_code.m_bp ? 0 : pll_code.m_code),
pll_code.n_code, pll_code.k_code);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_PLL_CTRL1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
pll_code.n_code << RT5645_PLL_N_SFT | pll_code.k_code);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_PLL_CTRL2,
ASoC: rt5645: clarify expression cppcheck warning: sound/soc/codecs/rt5645.c:2959:61: style: Boolean result is used in bitwise operation. Clarify expression with parentheses. [clarifyCondition] (pll_code.m_bp ? 0 : pll_code.m_code) << RT5645_PLL_M_SFT | ^ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210302212527.55158-11-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-03 05:25:13 +08:00
((pll_code.m_bp ? 0 : pll_code.m_code) << RT5645_PLL_M_SFT) |
(pll_code.m_bp << RT5645_PLL_M_BP_SFT));
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
rt5645->pll_in = freq_in;
rt5645->pll_out = freq_out;
rt5645->pll_src = source;
return 0;
}
static int rt5645_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
unsigned int rx_mask, int slots, int slot_width)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_component *component = dai->component;
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Add TDM support for rt5650 rt5650 and rt5645 use different register bits for TDM configuration. This patch modifies rt5645_set_tdm_slot to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 20:25:07 +08:00
unsigned int i_slot_sft, o_slot_sft, i_width_sht, o_width_sht, en_sft;
unsigned int mask, val = 0;
switch (rt5645->codec_type) {
case CODEC_TYPE_RT5650:
en_sft = 15;
i_slot_sft = 10;
o_slot_sft = 8;
i_width_sht = 6;
o_width_sht = 4;
mask = 0x8ff0;
break;
default:
en_sft = 14;
i_slot_sft = o_slot_sft = 12;
i_width_sht = o_width_sht = 10;
mask = 0x7c00;
break;
}
ASoC: rt5645: add register setting for TDM We need to set extra register to avoid a recording issue in TDM mode. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-13 09:55:22 +08:00
if (rx_mask || tx_mask) {
ASoC: rt5645: Add TDM support for rt5650 rt5650 and rt5645 use different register bits for TDM configuration. This patch modifies rt5645_set_tdm_slot to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 20:25:07 +08:00
val |= (1 << en_sft);
if (rt5645->codec_type == CODEC_TYPE_RT5645)
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_BASS_BACK,
ASoC: rt5645: Add TDM support for rt5650 rt5650 and rt5645 use different register bits for TDM configuration. This patch modifies rt5645_set_tdm_slot to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 20:25:07 +08:00
RT5645_G_BB_BST_MASK, RT5645_G_BB_BST_25DB);
ASoC: rt5645: add register setting for TDM We need to set extra register to avoid a recording issue in TDM mode. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-13 09:55:22 +08:00
}
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
switch (slots) {
case 4:
ASoC: rt5645: Add TDM support for rt5650 rt5650 and rt5645 use different register bits for TDM configuration. This patch modifies rt5645_set_tdm_slot to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 20:25:07 +08:00
val |= (1 << i_slot_sft) | (1 << o_slot_sft);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case 6:
ASoC: rt5645: Add TDM support for rt5650 rt5650 and rt5645 use different register bits for TDM configuration. This patch modifies rt5645_set_tdm_slot to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 20:25:07 +08:00
val |= (2 << i_slot_sft) | (2 << o_slot_sft);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case 8:
ASoC: rt5645: Add TDM support for rt5650 rt5650 and rt5645 use different register bits for TDM configuration. This patch modifies rt5645_set_tdm_slot to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 20:25:07 +08:00
val |= (3 << i_slot_sft) | (3 << o_slot_sft);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case 2:
default:
break;
}
switch (slot_width) {
case 20:
ASoC: rt5645: Add TDM support for rt5650 rt5650 and rt5645 use different register bits for TDM configuration. This patch modifies rt5645_set_tdm_slot to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 20:25:07 +08:00
val |= (1 << i_width_sht) | (1 << o_width_sht);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case 24:
ASoC: rt5645: Add TDM support for rt5650 rt5650 and rt5645 use different register bits for TDM configuration. This patch modifies rt5645_set_tdm_slot to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 20:25:07 +08:00
val |= (2 << i_width_sht) | (2 << o_width_sht);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case 32:
ASoC: rt5645: Add TDM support for rt5650 rt5650 and rt5645 use different register bits for TDM configuration. This patch modifies rt5645_set_tdm_slot to support both codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-03-12 20:25:07 +08:00
val |= (3 << i_width_sht) | (3 << o_width_sht);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
case 16:
default:
break;
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_TDM_CTRL_1, mask, val);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
return 0;
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static int rt5645_set_bias_level(struct snd_soc_component *component,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
enum snd_soc_bias_level level)
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
switch (level) {
ASoC: rt5645: make bias level more reasonale This patah separate bias level off to standby and off. The standby level will provide the necessary power for JD and push button functions. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04 13:15:10 +08:00
case SND_SOC_BIAS_PREPARE:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
if (SND_SOC_BIAS_STANDBY == snd_soc_component_get_bias_level(component)) {
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PWR_VREF1 | RT5645_PWR_MB |
RT5645_PWR_BG | RT5645_PWR_VREF2,
RT5645_PWR_VREF1 | RT5645_PWR_MB |
RT5645_PWR_BG | RT5645_PWR_VREF2);
mdelay(10);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_PWR_FV1 | RT5645_PWR_FV2,
RT5645_PWR_FV1 | RT5645_PWR_FV2);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GEN_CTRL1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
RT5645_DIG_GATE_CTRL, RT5645_DIG_GATE_CTRL);
}
break;
ASoC: rt5645: make bias level more reasonale This patah separate bias level off to standby and off. The standby level will provide the necessary power for JD and push button functions. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04 13:15:10 +08:00
case SND_SOC_BIAS_STANDBY:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: make bias level more reasonale This patah separate bias level off to standby and off. The standby level will provide the necessary power for JD and push button functions. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04 13:15:10 +08:00
RT5645_PWR_VREF1 | RT5645_PWR_MB |
RT5645_PWR_BG | RT5645_PWR_VREF2,
RT5645_PWR_VREF1 | RT5645_PWR_MB |
RT5645_PWR_BG | RT5645_PWR_VREF2);
ASoC: rt5645: improve headphone pop when system resumes from S3 When playing audio through headphone, headphone makes pop noise if system resumes from S3 to S0. We modify the sequence of writing register for avoiding pop sound. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-25 13:18:26 +08:00
mdelay(10);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: make bias level more reasonale This patah separate bias level off to standby and off. The standby level will provide the necessary power for JD and push button functions. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04 13:15:10 +08:00
RT5645_PWR_FV1 | RT5645_PWR_FV2,
RT5645_PWR_FV1 | RT5645_PWR_FV2);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
snd_soc_component_write(component, RT5645_DEPOP_M2, 0x1140);
ASoC: rt5645: improve headphone pop when system resumes from S3 When playing audio through headphone, headphone makes pop noise if system resumes from S3 to S0. We modify the sequence of writing register for avoiding pop sound. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-25 13:18:26 +08:00
msleep(40);
if (rt5645->en_button_func)
queue_delayed_work(system_power_efficient_wq,
&rt5645->jack_detect_work,
msecs_to_jiffies(0));
}
ASoC: rt5645: make bias level more reasonale This patah separate bias level off to standby and off. The standby level will provide the necessary power for JD and push button functions. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04 13:15:10 +08:00
break;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
case SND_SOC_BIAS_OFF:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5645_DEPOP_M2, 0x1100);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
if (!rt5645->en_button_func)
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_GEN_CTRL1,
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
RT5645_DIG_GATE_CTRL, 0);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5645_PWR_ANLG1,
ASoC: rt5645: make bias level more reasonale This patah separate bias level off to standby and off. The standby level will provide the necessary power for JD and push button functions. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-04 13:15:10 +08:00
RT5645_PWR_VREF1 | RT5645_PWR_MB |
RT5645_PWR_BG | RT5645_PWR_VREF2 |
RT5645_PWR_FV1 | RT5645_PWR_FV2, 0x0);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
break;
default:
break;
}
return 0;
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static void rt5645_enable_push_button_irq(struct snd_soc_component *component,
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
bool enable)
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
if (enable) {
ASoC: rt5645: Simplify rt5645_enable_push_button_irq LDO2/Mic Det Power pins are already enabled/disabled in rt5645_jack_detect (the jack out code path previously did not disable those if button function is enabled: modify it to make it so). Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16 13:42:34 +08:00
snd_soc_dapm_force_enable_pin(dapm, "ADC L power");
snd_soc_dapm_force_enable_pin(dapm, "ADC R power");
snd_soc_dapm_sync(dapm);
ASoC: rt5645: Lock mutex in rt5645_enable_push_button_irq rt5645_enable_push_button_irq uses snd_soc_dapm_*_unlocked functions, so it needs to lock the required dapm mutex. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10 11:54:13 +08:00
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5650_4BTN_IL_CMD1, 0x3, 0x3);
snd_soc_component_update_bits(component,
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
RT5645_INT_IRQ_ST, 0x8, 0x8);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component,
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
RT5650_4BTN_IL_CMD2, 0x8000, 0x8000);
ASoC: codecs: rt*: rename to snd_soc_component_read() We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87d05z4mce.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16 13:21:37 +08:00
snd_soc_component_read(component, RT5650_4BTN_IL_CMD1);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
pr_debug("%s read %x = %x\n", __func__, RT5650_4BTN_IL_CMD1,
ASoC: codecs: rt*: rename to snd_soc_component_read() We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87d05z4mce.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16 13:21:37 +08:00
snd_soc_component_read(component, RT5650_4BTN_IL_CMD1));
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
} else {
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(component, RT5650_4BTN_IL_CMD2, 0x8000, 0x0);
snd_soc_component_update_bits(component, RT5645_INT_IRQ_ST, 0x8, 0x0);
ASoC: rt5645: Lock mutex in rt5645_enable_push_button_irq rt5645_enable_push_button_irq uses snd_soc_dapm_*_unlocked functions, so it needs to lock the required dapm mutex. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10 11:54:13 +08:00
ASoC: rt5645: Simplify rt5645_enable_push_button_irq LDO2/Mic Det Power pins are already enabled/disabled in rt5645_jack_detect (the jack out code path previously did not disable those if button function is enabled: modify it to make it so). Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16 13:42:34 +08:00
snd_soc_dapm_disable_pin(dapm, "ADC L power");
snd_soc_dapm_disable_pin(dapm, "ADC R power");
snd_soc_dapm_sync(dapm);
ASoC: rt5645: Fix potential crash in jd function If no one defined the rt5645->pdata.hp_det_gpio in coreboot/bios. It will cause kernel to reboot because rt5645->pdata.hp_det_gpio is 0. So it is worth to add a check in rt5645_jack_detect. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-12-09 10:14:45 +08:00
}
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
}
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static int rt5645_jack_detect(struct snd_soc_component *component, int jack_insert)
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
unsigned int val;
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
if (jack_insert) {
ASoC: rt5645: improve the depop sequences of CBJ detection This patch will improve the depop function of CBJ detection before the headphone playback when the system resumes. We also want to complete the CBJ detection in the system-level resume function. It could avoid triggering the detection at the playing state of headphones. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18 10:37:32 +08:00
regmap_write(rt5645->regmap, RT5645_CHARGE_PUMP, 0x0206);
ASoC: rt5645: fix jack type detect error rt5645_jack_detect doesn't report the correct jack type consistently. It mistakes OMTP type headset to CTIA type in particular HW design. Register changes are needed for this issue. This patch can make it more stable. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:05 +08:00
ASoC: rt5645: Update dapm pins when the card is not instantiated yet This makes sure the dapm state is consistent when the card is instantiated. However, if the card is not instantiated yet, we still update the registers manually in the "jack in" case, so that we can immediately report if a mic is present or not. Disabling "Mic Det Power" after detection, and on jack out, can wait until the card gets instantiated. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16 13:42:33 +08:00
/* for jack type detect */
snd_soc_dapm_force_enable_pin(dapm, "LDO2");
snd_soc_dapm_force_enable_pin(dapm, "Mic Det Power");
snd_soc_dapm_sync(dapm);
ASoC: rt: use helper function Current ASoC has many helper function. This patch use it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87zg9zea4w.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-01-31 10:00:16 +08:00
if (!snd_soc_card_is_instantiated(dapm->card)) {
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
/* Power up necessary bits for JD if dapm is
not ready yet */
ASoC: rt5645: fix jack type detect error rt5645_jack_detect doesn't report the correct jack type consistently. It mistakes OMTP type headset to CTIA type in particular HW design. Register changes are needed for this issue. This patch can make it more stable. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:05 +08:00
regmap_update_bits(rt5645->regmap, RT5645_PWR_ANLG1,
RT5645_PWR_MB | RT5645_PWR_VREF2,
RT5645_PWR_MB | RT5645_PWR_VREF2);
regmap_update_bits(rt5645->regmap, RT5645_PWR_MIXER,
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
RT5645_PWR_LDO2, RT5645_PWR_LDO2);
ASoC: rt5645: fix jack type detect error rt5645_jack_detect doesn't report the correct jack type consistently. It mistakes OMTP type headset to CTIA type in particular HW design. Register changes are needed for this issue. This patch can make it more stable. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:05 +08:00
regmap_update_bits(rt5645->regmap, RT5645_PWR_VOL,
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
RT5645_PWR_MIC_DET, RT5645_PWR_MIC_DET);
}
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
ASoC: rt5645: fix jack type detect error rt5645_jack_detect doesn't report the correct jack type consistently. It mistakes OMTP type headset to CTIA type in particular HW design. Register changes are needed for this issue. This patch can make it more stable. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:05 +08:00
regmap_write(rt5645->regmap, RT5645_JD_CTRL3, 0x00f0);
ASoC: rt5645: Prevent the pop sound of the headphone while rebooting or shutdowning Add i2c shutdown function to prevent the pop sound of the headphone while the system is rebooting or shutdowning. It de-initials the jack detection function, and it cannot be turned off in _BIAS_OFF. If we don't de-initial it, the pop sound will be heard in the situation of powering off. And replace the related register settings from magic number to meaningful defined name. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 15:14:51 +08:00
regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2,
RT5645_CBJ_MN_JD, RT5645_CBJ_MN_JD);
regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1,
RT5645_CBJ_BST1_EN, RT5645_CBJ_BST1_EN);
ASoC: rt5645: fix jack type detect error rt5645_jack_detect doesn't report the correct jack type consistently. It mistakes OMTP type headset to CTIA type in particular HW design. Register changes are needed for this issue. This patch can make it more stable. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:05 +08:00
msleep(100);
ASoC: rt5645: Prevent the pop sound of the headphone while rebooting or shutdowning Add i2c shutdown function to prevent the pop sound of the headphone while the system is rebooting or shutdowning. It de-initials the jack detection function, and it cannot be turned off in _BIAS_OFF. If we don't de-initial it, the pop sound will be heard in the situation of powering off. And replace the related register settings from magic number to meaningful defined name. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 15:14:51 +08:00
regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2,
RT5645_CBJ_MN_JD, 0);
ASoC: rt5645: fix jack type detect error rt5645_jack_detect doesn't report the correct jack type consistently. It mistakes OMTP type headset to CTIA type in particular HW design. Register changes are needed for this issue. This patch can make it more stable. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:05 +08:00
ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating [ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ] The codec leaves tie combo jack's sleeve/ring2 to floating status default. It would cause electric noise while connecting the active speaker jack during boot or shutdown. This patch requests a gpio to control the additional jack circuit to tie the contacts to the ground or floating. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-08 17:10:56 +08:00
if (rt5645->gpiod_cbj_sleeve)
gpiod_set_value(rt5645->gpiod_cbj_sleeve, 1);
ASoC: rt5645: Modify the jack detection function to prevent the pop sound while the jack plug in The patch corrects the sequence of the jack detection. It will prevent the pop sound while the jack plug in. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-24 20:32:57 +08:00
msleep(600);
ASoC: rt5645: fix jack type detect error rt5645_jack_detect doesn't report the correct jack type consistently. It mistakes OMTP type headset to CTIA type in particular HW design. Register changes are needed for this issue. This patch can make it more stable. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:05 +08:00
regmap_read(rt5645->regmap, RT5645_IN1_CTRL3, &val);
val &= 0x7;
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_dbg(component->dev, "val = %d\n", val);
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
ASoC: rt5645: The ALC3270 variant does not have a headset-mic pin The Asus T100HA and T101HA 2-in-1s use a rt5645 family codec and always report that a headset (rather then headphones) are plugged in even when regular headphones are plugged in. And when a headset is used, then the headset-microphone does not work. According to RealTek the ALC3270 variant used in these devices does not support headsets only headphones. Since the ALC3270 is a budget version of the regular ALC5645 codec, I assume that it is using a package with less pins and the headset-mic pin is simply not connected. Detect if the codec is an ALC3270 based on the ACPI HID and if it is an ALC3270 then always report SND_JACK_MICROPHONE as false, so that userspace will not try to use the not-connected headset-mic. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210306230223.516566-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-07 07:02:23 +08:00
if ((val == 1 || val == 2) && !rt5645->pdata.no_headset_mic) {
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
rt5645->jack_type = SND_JACK_HEADSET;
if (rt5645->en_button_func) {
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
rt5645_enable_push_button_irq(component, true);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
}
} else {
ASoC: rt5650: add mutex to avoid the jack detection failure [ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ] This patch adds the jd_mutex to protect the jack detection control flow. And only the headset type could check the button status. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-22 18:01:23 +08:00
if (rt5645->en_button_func)
rt5645_enable_push_button_irq(component, false);
ASoC: rt5645: Update dapm pins when the card is not instantiated yet This makes sure the dapm state is consistent when the card is instantiated. However, if the card is not instantiated yet, we still update the registers manually in the "jack in" case, so that we can immediately report if a mic is present or not. Disabling "Mic Det Power" after detection, and on jack out, can wait until the card gets instantiated. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16 13:42:33 +08:00
snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
snd_soc_dapm_sync(dapm);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
rt5645->jack_type = SND_JACK_HEADPHONE;
ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating [ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ] The codec leaves tie combo jack's sleeve/ring2 to floating status default. It would cause electric noise while connecting the active speaker jack during boot or shutdown. This patch requests a gpio to control the additional jack circuit to tie the contacts to the ground or floating. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-08 17:10:56 +08:00
if (rt5645->gpiod_cbj_sleeve)
gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
}
ASoC: rt5645: rename jd_invert flag in platform data The jd_invert flag is actually used for level triggered IRQ. Rename it to let code more readable. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:37 +08:00
if (rt5645->pdata.level_trigger_irq)
ASoC: rt5645: Add jd_invert for Broadwell Broadwell can not triger the IRQ falling and rising simultaneously, so it can not detect jack-in and jack-out simultaneously. We add a flag "jd_invert" to platform data. If this flag is set, codec IRQ will be set to invert that forces IRQ as pulse when jack-in and jack-out. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-21 14:12:01 +08:00
regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
ASoC: rt5645: use polling to support HS button The IRQ pin will keep high when the headset button is pressed. And keep low when the headset button is released. So, we need irq trigger at both edges. However, some platform can't support it. Therefore, we polling the register to report the button release event once a button presse event is received. To support the headset button detection function for those can't support both edges trigger platforms, we also need to invert the polarity of jack detection irq since we need to keep the IRQ pin low in normal case. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:20 +08:00
RT5645_JD_1_1_MASK, RT5645_JD_1_1_NOR);
ASoC: rt5645: improve the depop sequences of CBJ detection This patch will improve the depop function of CBJ detection before the headphone playback when the system resumes. We also want to complete the CBJ detection in the system-level resume function. It could avoid triggering the detection at the playing state of headphones. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18 10:37:32 +08:00
regmap_write(rt5645->regmap, RT5645_CHARGE_PUMP, 0x0e06);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
} else { /* jack out */
rt5645->jack_type = 0;
ASoC: rt5645: Simplify rt5645_enable_push_button_irq LDO2/Mic Det Power pins are already enabled/disabled in rt5645_jack_detect (the jack out code path previously did not disable those if button function is enabled: modify it to make it so). Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16 13:42:34 +08:00
ASoC: rt5645: Prevent the pop sound in case of playback and the jack is plugging Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-23 14:35:30 +08:00
regmap_update_bits(rt5645->regmap, RT5645_HP_VOL,
RT5645_L_MUTE | RT5645_R_MUTE,
RT5645_L_MUTE | RT5645_R_MUTE);
ASoC: rt5645: Prevent the pop sound of the headphone while rebooting or shutdowning Add i2c shutdown function to prevent the pop sound of the headphone while the system is rebooting or shutdowning. It de-initials the jack detection function, and it cannot be turned off in _BIAS_OFF. If we don't de-initial it, the pop sound will be heard in the situation of powering off. And replace the related register settings from magic number to meaningful defined name. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 15:14:51 +08:00
regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2,
RT5645_CBJ_MN_JD, RT5645_CBJ_MN_JD);
regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1,
RT5645_CBJ_BST1_EN, 0);
ASoC: rt5645: Modify the jack detection function to prevent the pop sound while the jack plug in The patch corrects the sequence of the jack detection. It will prevent the pop sound while the jack plug in. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-24 20:32:57 +08:00
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
if (rt5645->en_button_func)
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
rt5645_enable_push_button_irq(component, false);
ASoC: rt5645: Simplify rt5645_enable_push_button_irq LDO2/Mic Det Power pins are already enabled/disabled in rt5645_jack_detect (the jack out code path previously did not disable those if button function is enabled: modify it to make it so). Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-16 13:42:34 +08:00
if (rt5645->pdata.jd_mode == 0)
snd_soc_dapm_disable_pin(dapm, "LDO2");
snd_soc_dapm_disable_pin(dapm, "Mic Det Power");
snd_soc_dapm_sync(dapm);
ASoC: rt5645: rename jd_invert flag in platform data The jd_invert flag is actually used for level triggered IRQ. Rename it to let code more readable. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:37 +08:00
if (rt5645->pdata.level_trigger_irq)
ASoC: rt5645: Add jd_invert for Broadwell Broadwell can not triger the IRQ falling and rising simultaneously, so it can not detect jack-in and jack-out simultaneously. We add a flag "jd_invert" to platform data. If this flag is set, codec IRQ will be set to invert that forces IRQ as pulse when jack-in and jack-out. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-21 14:12:01 +08:00
regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
ASoC: rt5645: use polling to support HS button The IRQ pin will keep high when the headset button is pressed. And keep low when the headset button is released. So, we need irq trigger at both edges. However, some platform can't support it. Therefore, we polling the register to report the button release event once a button presse event is received. To support the headset button detection function for those can't support both edges trigger platforms, we also need to invert the polarity of jack detection irq since we need to keep the IRQ pin low in normal case. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:20 +08:00
RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV);
ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating [ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ] The codec leaves tie combo jack's sleeve/ring2 to floating status default. It would cause electric noise while connecting the active speaker jack during boot or shutdown. This patch requests a gpio to control the additional jack circuit to tie the contacts to the ground or floating. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-08 17:10:56 +08:00
if (rt5645->gpiod_cbj_sleeve)
gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
}
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
return rt5645->jack_type;
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static int rt5645_button_detect(struct snd_soc_component *component)
ASoC: rt5645: Remove irq_jack_detection function irq_jack_detection is only called from rt5645_jack_detect_work: remove the function to simplify the code. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-14 14:51:26 +08:00
{
int btn_type, val;
ASoC: codecs: rt*: rename to snd_soc_component_read() We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87d05z4mce.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16 13:21:37 +08:00
val = snd_soc_component_read(component, RT5650_4BTN_IL_CMD1);
ASoC: rt5645: Remove irq_jack_detection function irq_jack_detection is only called from rt5645_jack_detect_work: remove the function to simplify the code. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-14 14:51:26 +08:00
pr_debug("val=0x%x\n", val);
btn_type = val & 0xfff0;
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_write(component, RT5650_4BTN_IL_CMD1, val);
ASoC: rt5645: Remove irq_jack_detection function irq_jack_detection is only called from rt5645_jack_detect_work: remove the function to simplify the code. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-14 14:51:26 +08:00
return btn_type;
}
ASoC: rt5645: fix kernel hang when call rt5645_set_jack_detect() rt5645_set_jack_detect() is usually called from snd_soc_dai_link.init() and it calls snd_soc_jack_report() from rt5645_irq_detection() if jack is inserted. snd_soc_jack_report() results in kernel hang if it is called from a context which cannot sleep. This patch makes sure snd_soc_jack_report() is called from workqueue. It can fix the kernel hang issue. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 10:34:03 +08:00
static irqreturn_t rt5645_irq(int irq, void *data);
ASoC: rt5645: fix implicit declaration error kbuild robot reports a implicit declaration of function 'rt5645_irq_detection' error. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 10:30:01 +08:00
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
int rt5645_set_jack_detect(struct snd_soc_component *component,
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
struct snd_soc_jack *hp_jack, struct snd_soc_jack *mic_jack,
struct snd_soc_jack *btn_jack)
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
ASoC: rt5645: two jacks for hp and mic Some OS need headphone and microphone to be separated. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-14 14:25:37 +08:00
rt5645->hp_jack = hp_jack;
rt5645->mic_jack = mic_jack;
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
rt5645->btn_jack = btn_jack;
if (rt5645->btn_jack && rt5645->codec_type == CODEC_TYPE_RT5650) {
rt5645->en_button_func = true;
regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1,
RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ);
regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL1,
RT5645_DIG_GATE_CTRL, RT5645_DIG_GATE_CTRL);
ASoC: rt5650: fix the wrong result of key button The RT5650 should enable a power setting for button detection to avoid the wrong result. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20231013094525.715518-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-10-13 17:45:25 +08:00
regmap_update_bits(rt5645->regmap, RT5645_DEPOP_M1,
RT5645_HP_CB_MASK, RT5645_HP_CB_PU);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
}
ASoC: rt5645: fix kernel hang when call rt5645_set_jack_detect() rt5645_set_jack_detect() is usually called from snd_soc_dai_link.init() and it calls snd_soc_jack_report() from rt5645_irq_detection() if jack is inserted. snd_soc_jack_report() results in kernel hang if it is called from a context which cannot sleep. This patch makes sure snd_soc_jack_report() is called from workqueue. It can fix the kernel hang issue. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-18 10:34:03 +08:00
rt5645_irq(0, rt5645);
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
return 0;
}
EXPORT_SYMBOL_GPL(rt5645_set_jack_detect);
ASoC: rt5645: implement set_jack callback Add a wrapper function to support set_jack component driver callback. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230705042349.24905-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-05 12:23:48 +08:00
static int rt5645_component_set_jack(struct snd_soc_component *component,
struct snd_soc_jack *hs_jack, void *data)
{
struct snd_soc_jack *mic_jack = NULL;
struct snd_soc_jack *btn_jack = NULL;
ASoC: rt5645: NULL pointer access when removing jack Machine driver calls snd_soc_component_set_jack() function with NULL jack and data parameters when removing jack in codec exit function. Do not access data when jack is NULL. Signed-off-by: Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20230904104046.4150208-1-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-04 18:40:46 +08:00
int type;
ASoC: rt5645: implement set_jack callback Add a wrapper function to support set_jack component driver callback. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230705042349.24905-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-05 12:23:48 +08:00
ASoC: rt5645: NULL pointer access when removing jack Machine driver calls snd_soc_component_set_jack() function with NULL jack and data parameters when removing jack in codec exit function. Do not access data when jack is NULL. Signed-off-by: Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20230904104046.4150208-1-brent.lu@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-09-04 18:40:46 +08:00
if (hs_jack) {
type = *(int *)data;
if (type & SND_JACK_MICROPHONE)
mic_jack = hs_jack;
if (type & (SND_JACK_BTN_0 | SND_JACK_BTN_1 |
SND_JACK_BTN_2 | SND_JACK_BTN_3))
btn_jack = hs_jack;
}
ASoC: rt5645: implement set_jack callback Add a wrapper function to support set_jack component driver callback. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230705042349.24905-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-05 12:23:48 +08:00
return rt5645_set_jack_detect(component, hs_jack, mic_jack, btn_jack);
}
ASoC: rt5645: Add the workqueue of the jack detect function for the debouncing Add the workqueue of the jack detect function for the debouncing. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-07 10:25:37 +08:00
static void rt5645_jack_detect_work(struct work_struct *work)
{
struct rt5645_priv *rt5645 =
container_of(work, struct rt5645_priv, jack_detect_work.work);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
int val, btn_type, gpio_state = 0, report = 0;
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
if (!rt5645->component)
ASoC: rt5645: Remove return value in jack detect work "ASoC: rt5645: Check if codec is initialized in workqueue handler" adds a check if codec is NULL in rt5645_irq_detection, which returns an int. However, "ASoC: rt5645: Remove irq_jack_detection function" removes that function, and moves the code in jack_detect_work, which returns void. Remove the return value to fix compilation warning. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-20 09:32:05 +08:00
return;
ASoC: rt5645: Check if codec is initialized in workqueue handler This fixes kernel panic on boot, if rt5645->codec is NULL when rt5645_jack_detect_work is first called. rt5645_jack_detect_work needs rt5645->codec to be initialized to setup dapm pins. Also, reporting jack events is useless, as the jacks cannot be set before the codec is ready. Since we manually call the interrupt handler in rt5645_set_jack_detect, the initial jack state will be reported correctly, and dapm pins will be setup at that time. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 10:36:57 +08:00
ASoC: rt5650: add mutex to avoid the jack detection failure [ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ] This patch adds the jd_mutex to protect the jack detection control flow. And only the headset type could check the button status. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-22 18:01:23 +08:00
mutex_lock(&rt5645->jd_mutex);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
switch (rt5645->pdata.jd_mode) {
case 0: /* Not using rt5645 JD */
ASoC: rt5645: change gpio to gpiod APIs Move gpio to gpio_desc and use gpiod APIs in codec driver. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10 14:27:57 +08:00
if (rt5645->gpiod_hp_det) {
gpio_state = gpiod_get_value(rt5645->gpiod_hp_det);
ASoC: rt5645: add inv_hp_det flag The ECS EF20EA laptop use gpio for jack detection instead of rt5645 rt5645 JD. However, the GPIO polarity is inverse for hp-detect based on the _DSD property of the RTK2 device. Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"hp-detect-gpio", Package() {^RTK2, 0, 0, 1 }}, } }) This flag will invert the hp-detect gpio polarity. Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20210111054141.4668-4-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-11 13:41:40 +08:00
if (rt5645->pdata.inv_hp_pol)
gpio_state ^= 1;
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_dbg(rt5645->component->dev, "gpio_state = %d\n",
ASoC: rt5645: change gpio to gpiod APIs Move gpio to gpio_desc and use gpiod APIs in codec driver. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10 14:27:57 +08:00
gpio_state);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
report = rt5645_jack_detect(rt5645->component, gpio_state);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
}
snd_soc_jack_report(rt5645->hp_jack,
report, SND_JACK_HEADPHONE);
snd_soc_jack_report(rt5645->mic_jack,
report, SND_JACK_MICROPHONE);
ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work() [ Upstream commit 6ef5d5b92f7117b324efaac72b3db27ae8bb3082 ] There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex is left locked forever. That may lead to deadlock when rt5645_jack_detect_work() is called for the second time. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: cdba4301adda ("ASoC: rt5650: add mutex to avoid the jack detection failure") Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/1707645514-21196-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-11 17:58:34 +08:00
mutex_unlock(&rt5645->jd_mutex);
ASoC: rt5645: Remove irq_jack_detection function irq_jack_detection is only called from rt5645_jack_detect_work: remove the function to simplify the code. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-14 14:51:26 +08:00
return;
ASoC: rt5645: Fixed buddy jack support. The headphone jack on buddy was broken with the following commit: commit 6b5da66322c5 ("ASoC: rt5645: read jd1_1 status for jd detection"). This changes the jd_mode for buddy to 4 so buddy can read from the same register that was used in the working version of this driver without affecting any other devices that might use this, since no other device uses jd_mode = 4. To test this I plugged and uplugged the headphone jack, verifying audio works. Signed-off-by: Jacob Rasmussen <jacobraz@google.com> Reviewed-by: Ross Zwisler <zwisler@google.com> Link: https://lore.kernel.org/r/20191111185957.217244-1-jacobraz@google.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-11-12 02:59:57 +08:00
case 4:
ASoC: codecs: rt*: rename to snd_soc_component_read() We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87d05z4mce.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16 13:21:37 +08:00
val = snd_soc_component_read(rt5645->component, RT5645_A_JD_CTRL1) & 0x0020;
ASoC: rt5645: Fixed buddy jack support. The headphone jack on buddy was broken with the following commit: commit 6b5da66322c5 ("ASoC: rt5645: read jd1_1 status for jd detection"). This changes the jd_mode for buddy to 4 so buddy can read from the same register that was used in the working version of this driver without affecting any other devices that might use this, since no other device uses jd_mode = 4. To test this I plugged and uplugged the headphone jack, verifying audio works. Signed-off-by: Jacob Rasmussen <jacobraz@google.com> Reviewed-by: Ross Zwisler <zwisler@google.com> Link: https://lore.kernel.org/r/20191111185957.217244-1-jacobraz@google.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-11-12 02:59:57 +08:00
break;
ASoC: rt5645: read jd1_1 status for jd detection Read the jd status after invert control. The benefit is we don't need to invert the reading jd status when jd invert is needed. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:36 +08:00
default: /* read rt5645 jd1_1 status */
ASoC: codecs: rt*: rename to snd_soc_component_read() We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87d05z4mce.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16 13:21:37 +08:00
val = snd_soc_component_read(rt5645->component, RT5645_INT_IRQ_ST) & 0x1000;
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
break;
}
ASoC: rt5645: read jd1_1 status for jd detection Read the jd status after invert control. The benefit is we don't need to invert the reading jd status when jd invert is needed. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:36 +08:00
if (!val && (rt5645->jack_type == 0)) { /* jack in */
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
report = rt5645_jack_detect(rt5645->component, 1);
ASoC: rt5650: add mutex to avoid the jack detection failure [ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ] This patch adds the jd_mutex to protect the jack detection control flow. And only the headset type could check the button status. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-22 18:01:23 +08:00
} else if (!val && rt5645->jack_type == SND_JACK_HEADSET) {
ASoC: rt5645: read jd1_1 status for jd detection Read the jd status after invert control. The benefit is we don't need to invert the reading jd status when jd invert is needed. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:36 +08:00
/* for push button and jack out */
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
btn_type = 0;
ASoC: codecs: rt*: rename to snd_soc_component_read() We need to use snd_soc_component_read() instead of snd_soc_component_read32() This patch renames _read32() to _read() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87d05z4mce.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-16 13:21:37 +08:00
if (snd_soc_component_read(rt5645->component, RT5645_INT_IRQ_ST) & 0x4) {
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
/* button pressed */
report = SND_JACK_HEADSET;
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
btn_type = rt5645_button_detect(rt5645->component);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
/* rt5650 can report three kinds of button behavior,
one click, double click and hold. However,
currently we will report button pressed/released
event. So all the three button behaviors are
treated as button pressed. */
switch (btn_type) {
case 0x8000:
case 0x4000:
case 0x2000:
report |= SND_JACK_BTN_0;
break;
case 0x1000:
case 0x0800:
case 0x0400:
report |= SND_JACK_BTN_1;
break;
case 0x0200:
case 0x0100:
case 0x0080:
report |= SND_JACK_BTN_2;
break;
case 0x0040:
case 0x0020:
case 0x0010:
report |= SND_JACK_BTN_3;
break;
case 0x0000: /* unpressed */
break;
default:
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
dev_err(rt5645->component->dev,
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
"Unexpected button code 0x%04x\n",
btn_type);
break;
}
}
if (btn_type == 0)/* button release */
report = rt5645->jack_type;
ASoC: rt5645: use polling to support HS button The IRQ pin will keep high when the headset button is pressed. And keep low when the headset button is released. So, we need irq trigger at both edges. However, some platform can't support it. Therefore, we polling the register to report the button release event once a button presse event is received. To support the headset button detection function for those can't support both edges trigger platforms, we also need to invert the polarity of jack detection irq since we need to keep the IRQ pin low in normal case. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:20 +08:00
else {
ASoC: rt5645: polling jd status in all conditions We only polling jd status when rt5645->pdata.jd_invert is true. However, it should be done at all time since there will be no interrupt for jd if we press a headset button and remove the headset at the same time. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-05-05 11:13:31 +08:00
mod_timer(&rt5645->btn_check_timer,
msecs_to_jiffies(100));
ASoC: rt5645: use polling to support HS button The IRQ pin will keep high when the headset button is pressed. And keep low when the headset button is released. So, we need irq trigger at both edges. However, some platform can't support it. Therefore, we polling the register to report the button release event once a button presse event is received. To support the headset button detection function for those can't support both edges trigger platforms, we also need to invert the polarity of jack detection irq since we need to keep the IRQ pin low in normal case. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:20 +08:00
}
ASoC: rt5645: read jd1_1 status for jd detection Read the jd status after invert control. The benefit is we don't need to invert the reading jd status when jd invert is needed. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:36 +08:00
} else {
/* jack out */
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
report = 0;
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_update_bits(rt5645->component,
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
RT5645_INT_IRQ_ST, 0x1, 0x0);
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
rt5645_jack_detect(rt5645->component, 0);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
}
ASoC: rt5650: add mutex to avoid the jack detection failure [ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ] This patch adds the jd_mutex to protect the jack detection control flow. And only the headset type could check the button status. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-22 18:01:23 +08:00
mutex_unlock(&rt5645->jd_mutex);
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
snd_soc_jack_report(rt5645->hp_jack, report, SND_JACK_HEADPHONE);
snd_soc_jack_report(rt5645->mic_jack, report, SND_JACK_MICROPHONE);
if (rt5645->en_button_func)
snd_soc_jack_report(rt5645->btn_jack,
ASoC: rt5645: fix wrong mask for button report rt5645->btn_jack is for jack button report. So the mask should be SND_JACK_BTN_0 | SND_JACK_BTN_1 | SND_JACK_BTN_2 | SND_JACK_BTN_3. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-30 18:18:46 +08:00
report, SND_JACK_BTN_0 | SND_JACK_BTN_1 |
SND_JACK_BTN_2 | SND_JACK_BTN_3);
ASoC: rt5645: Remove irq_jack_detection function irq_jack_detection is only called from rt5645_jack_detect_work: remove the function to simplify the code. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-14 14:51:26 +08:00
}
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
ASoC: rt5645: Power up the RC clock to make sure the speaker volume adjust properly Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-05 19:55:51 +08:00
static void rt5645_rcclock_work(struct work_struct *work)
{
struct rt5645_priv *rt5645 =
container_of(work, struct rt5645_priv, rcclock_work.work);
regmap_update_bits(rt5645->regmap, RT5645_MICBIAS,
RT5645_PWR_CLK25M_MASK, RT5645_PWR_CLK25M_PD);
}
ASoC: rt5645: Remove irq_jack_detection function irq_jack_detection is only called from rt5645_jack_detect_work: remove the function to simplify the code. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-14 14:51:26 +08:00
static irqreturn_t rt5645_irq(int irq, void *data)
{
struct rt5645_priv *rt5645 = data;
queue_delayed_work(system_power_efficient_wq,
&rt5645->jack_detect_work, msecs_to_jiffies(250));
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
ASoC: rt5645: Remove irq_jack_detection function irq_jack_detection is only called from rt5645_jack_detect_work: remove the function to simplify the code. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-14 14:51:26 +08:00
return IRQ_HANDLED;
ASoC: rt5645: Adds push button support for rt5650 rt5650 support headset button detection. Currently, the button detection is only implemented for rt5650 codec. The button detection configuration register's default value is different from rt5645. And we didn't touch the register in the driver, so we will get the wrong value when we dump the registers. We will fix it in another patch. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-28 09:59:43 +08:00
}
ALSA: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. These are all the "mechanical" changes remaining in the sound subsystem. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-25 23:09:27 +08:00
static void rt5645_btn_check_callback(struct timer_list *t)
ASoC: rt5645: use polling to support HS button The IRQ pin will keep high when the headset button is pressed. And keep low when the headset button is released. So, we need irq trigger at both edges. However, some platform can't support it. Therefore, we polling the register to report the button release event once a button presse event is received. To support the headset button detection function for those can't support both edges trigger platforms, we also need to invert the polarity of jack detection irq since we need to keep the IRQ pin low in normal case. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:20 +08:00
{
ALSA: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. These are all the "mechanical" changes remaining in the sound subsystem. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-25 23:09:27 +08:00
struct rt5645_priv *rt5645 = from_timer(rt5645, t, btn_check_timer);
ASoC: rt5645: use polling to support HS button The IRQ pin will keep high when the headset button is pressed. And keep low when the headset button is released. So, we need irq trigger at both edges. However, some platform can't support it. Therefore, we polling the register to report the button release event once a button presse event is received. To support the headset button detection function for those can't support both edges trigger platforms, we also need to invert the polarity of jack detection irq since we need to keep the IRQ pin low in normal case. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:20 +08:00
queue_delayed_work(system_power_efficient_wq,
&rt5645->jack_detect_work, msecs_to_jiffies(5));
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static int rt5645_probe(struct snd_soc_component *component)
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct snd_soc_dapm_context *dapm = snd_soc_component_get_dapm(component);
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
rt5645->component = component;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
switch (rt5645->codec_type) {
case CODEC_TYPE_RT5645:
ASoC: rt5645: Avoid upgrading static warnings to errors One of the fixes reverted as part of the UMN fallout was actually fine, however rather than undoing the revert the process that handled all this stuff resulted in a patch which attempted to add extra error checks instead. Unfortunately this new change wasn't really based on a good understanding of the subsystem APIs and bypassed the usual patch flow without ensuring it was reviewed by people with subsystem knowledge and was merged as a fix rather than during the merge window. The effect of the new fix is to upgrade what were previously warnings on static data in the code to hard errors on that data. If this actually happens then it would break existing systems, if it doesn't happen then the change has no effect so this was not a safe change to apply as a fix to the release candidates. Since the new code has not been tested and doesn't in practice improve error handling revert it instead, and also drop the original revert since the original fix was fine. This takes the driver back to what it was in -rc1. Fixes: 5e70b8e22b64e ("ASoC: rt5645: add error checking to rt5645_probe function") Fixes: 1e0ce84215dbf ("Revert "ASoC: rt5645: fix a NULL pointer dereference") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> (cherry picked from commit 916cccb5078eee57fce131c5fe18e417545083e2) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-09 00:07:13 +08:00
snd_soc_dapm_new_controls(dapm,
ASoC: rt5645: move RT5645 muxes to rt5645_specific_dapm_widgets This is a similar patch to "move RT5650 muxes to rt5650_specific_ dapm_widgets" patch. The purpose is to silence the "has no paths" warnings. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-29 14:20:50 +08:00
rt5645_specific_dapm_widgets,
ARRAY_SIZE(rt5645_specific_dapm_widgets));
ASoC: rt5645: Avoid upgrading static warnings to errors One of the fixes reverted as part of the UMN fallout was actually fine, however rather than undoing the revert the process that handled all this stuff resulted in a patch which attempted to add extra error checks instead. Unfortunately this new change wasn't really based on a good understanding of the subsystem APIs and bypassed the usual patch flow without ensuring it was reviewed by people with subsystem knowledge and was merged as a fix rather than during the merge window. The effect of the new fix is to upgrade what were previously warnings on static data in the code to hard errors on that data. If this actually happens then it would break existing systems, if it doesn't happen then the change has no effect so this was not a safe change to apply as a fix to the release candidates. Since the new code has not been tested and doesn't in practice improve error handling revert it instead, and also drop the original revert since the original fix was fine. This takes the driver back to what it was in -rc1. Fixes: 5e70b8e22b64e ("ASoC: rt5645: add error checking to rt5645_probe function") Fixes: 1e0ce84215dbf ("Revert "ASoC: rt5645: fix a NULL pointer dereference") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> (cherry picked from commit 916cccb5078eee57fce131c5fe18e417545083e2) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-09 00:07:13 +08:00
snd_soc_dapm_add_routes(dapm,
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
rt5645_specific_dapm_routes,
ARRAY_SIZE(rt5645_specific_dapm_routes));
ASoC: rt5645: remove unexisting route on new rt5645 "SPOL MIX DAC R1 Switch" and "SPOL MIX SPKVOL R Switch" are only exist in the early version of rt5645. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-30 15:26:05 +08:00
if (rt5645->v_id < 3) {
ASoC: rt5645: Avoid upgrading static warnings to errors One of the fixes reverted as part of the UMN fallout was actually fine, however rather than undoing the revert the process that handled all this stuff resulted in a patch which attempted to add extra error checks instead. Unfortunately this new change wasn't really based on a good understanding of the subsystem APIs and bypassed the usual patch flow without ensuring it was reviewed by people with subsystem knowledge and was merged as a fix rather than during the merge window. The effect of the new fix is to upgrade what were previously warnings on static data in the code to hard errors on that data. If this actually happens then it would break existing systems, if it doesn't happen then the change has no effect so this was not a safe change to apply as a fix to the release candidates. Since the new code has not been tested and doesn't in practice improve error handling revert it instead, and also drop the original revert since the original fix was fine. This takes the driver back to what it was in -rc1. Fixes: 5e70b8e22b64e ("ASoC: rt5645: add error checking to rt5645_probe function") Fixes: 1e0ce84215dbf ("Revert "ASoC: rt5645: fix a NULL pointer dereference") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> (cherry picked from commit 916cccb5078eee57fce131c5fe18e417545083e2) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-09 00:07:13 +08:00
snd_soc_dapm_add_routes(dapm,
ASoC: rt5645: remove unexisting route on new rt5645 "SPOL MIX DAC R1 Switch" and "SPOL MIX SPKVOL R Switch" are only exist in the early version of rt5645. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-30 15:26:05 +08:00
rt5645_old_dapm_routes,
ARRAY_SIZE(rt5645_old_dapm_routes));
}
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
break;
case CODEC_TYPE_RT5650:
ASoC: rt5645: Avoid upgrading static warnings to errors One of the fixes reverted as part of the UMN fallout was actually fine, however rather than undoing the revert the process that handled all this stuff resulted in a patch which attempted to add extra error checks instead. Unfortunately this new change wasn't really based on a good understanding of the subsystem APIs and bypassed the usual patch flow without ensuring it was reviewed by people with subsystem knowledge and was merged as a fix rather than during the merge window. The effect of the new fix is to upgrade what were previously warnings on static data in the code to hard errors on that data. If this actually happens then it would break existing systems, if it doesn't happen then the change has no effect so this was not a safe change to apply as a fix to the release candidates. Since the new code has not been tested and doesn't in practice improve error handling revert it instead, and also drop the original revert since the original fix was fine. This takes the driver back to what it was in -rc1. Fixes: 5e70b8e22b64e ("ASoC: rt5645: add error checking to rt5645_probe function") Fixes: 1e0ce84215dbf ("Revert "ASoC: rt5645: fix a NULL pointer dereference") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> (cherry picked from commit 916cccb5078eee57fce131c5fe18e417545083e2) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-09 00:07:13 +08:00
snd_soc_dapm_new_controls(dapm,
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
rt5650_specific_dapm_widgets,
ARRAY_SIZE(rt5650_specific_dapm_widgets));
ASoC: rt5645: Avoid upgrading static warnings to errors One of the fixes reverted as part of the UMN fallout was actually fine, however rather than undoing the revert the process that handled all this stuff resulted in a patch which attempted to add extra error checks instead. Unfortunately this new change wasn't really based on a good understanding of the subsystem APIs and bypassed the usual patch flow without ensuring it was reviewed by people with subsystem knowledge and was merged as a fix rather than during the merge window. The effect of the new fix is to upgrade what were previously warnings on static data in the code to hard errors on that data. If this actually happens then it would break existing systems, if it doesn't happen then the change has no effect so this was not a safe change to apply as a fix to the release candidates. Since the new code has not been tested and doesn't in practice improve error handling revert it instead, and also drop the original revert since the original fix was fine. This takes the driver back to what it was in -rc1. Fixes: 5e70b8e22b64e ("ASoC: rt5645: add error checking to rt5645_probe function") Fixes: 1e0ce84215dbf ("Revert "ASoC: rt5645: fix a NULL pointer dereference") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> (cherry picked from commit 916cccb5078eee57fce131c5fe18e417545083e2) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-09 00:07:13 +08:00
snd_soc_dapm_add_routes(dapm,
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
rt5650_specific_dapm_routes,
ARRAY_SIZE(rt5650_specific_dapm_routes));
break;
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
snd_soc_component_force_bias_level(component, SND_SOC_BIAS_OFF);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: Add JD function support rt5645 codec support jack detection function. The patch will set related registers if JD function is used. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 15:02:08 +08:00
/* for JD function */
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
if (rt5645->pdata.jd_mode) {
ASoC: rt5645: Avoid upgrading static warnings to errors One of the fixes reverted as part of the UMN fallout was actually fine, however rather than undoing the revert the process that handled all this stuff resulted in a patch which attempted to add extra error checks instead. Unfortunately this new change wasn't really based on a good understanding of the subsystem APIs and bypassed the usual patch flow without ensuring it was reviewed by people with subsystem knowledge and was merged as a fix rather than during the merge window. The effect of the new fix is to upgrade what were previously warnings on static data in the code to hard errors on that data. If this actually happens then it would break existing systems, if it doesn't happen then the change has no effect so this was not a safe change to apply as a fix to the release candidates. Since the new code has not been tested and doesn't in practice improve error handling revert it instead, and also drop the original revert since the original fix was fine. This takes the driver back to what it was in -rc1. Fixes: 5e70b8e22b64e ("ASoC: rt5645: add error checking to rt5645_probe function") Fixes: 1e0ce84215dbf ("Revert "ASoC: rt5645: fix a NULL pointer dereference") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> (cherry picked from commit 916cccb5078eee57fce131c5fe18e417545083e2) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-09 00:07:13 +08:00
snd_soc_dapm_force_enable_pin(dapm, "JD Power");
snd_soc_dapm_force_enable_pin(dapm, "LDO2");
snd_soc_dapm_sync(dapm);
ASoC: rt5645: Add JD function support rt5645 codec support jack detection function. The patch will set related registers if JD function is used. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 15:02:08 +08:00
}
ASoC: rt5645: Set card long_name for GPD win / pocket The GPD win and pocket devices both use the same codec setup and both have too generic dmi strings making snd_soc_set_dmi_name() not work. As these devices have only a single speaker we want a separate ucm file for them, which requires a unique long_name, use the existing GPD quirk handling to also provide a unique long_name. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-12 05:26:40 +08:00
if (rt5645->pdata.long_name)
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
component->card->long_name = rt5645->pdata.long_name;
ASoC: rt5645: Set card long_name for GPD win / pocket The GPD win and pocket devices both use the same codec setup and both have too generic dmi strings making snd_soc_set_dmi_name() not work. As these devices have only a single speaker we want a separate ucm file for them, which requires a unique long_name, use the existing GPD quirk handling to also provide a unique long_name. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-12 05:26:40 +08:00
treewide: devm_kzalloc() -> devm_kcalloc() The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 05:07:58 +08:00
rt5645->eq_param = devm_kcalloc(component->dev,
RT5645_HWEQ_NUM, sizeof(struct rt5645_eq_param_s),
GFP_KERNEL);
ASoC: rt5645: Add the HWEQ for the speaker output The patch adds the HWEQ function for the speaker output. User can set the HWEQ parameters using the ALSA binary control byte-by-byte. We use the following struct array to store the HWEQ parameters for implementing as simple as possible. struct rt5645_eq_param_s { unsigned short reg; unsigned short val; }; It supports the variant length of the HWEQ parameters that are required. We add the validating function in the function "rt5645_hweq_put" of the ALSA binary control to avoid the user that puts the invalid parameters. In the HWEQ enable function of speaker event, we also add the validating function to prevent that the invalid parameters are applied to codec. The HWEQ parameters should be controlled by DAPM for a specific sequence, so the parameters will be applied to the codec in the speaker power up event of DAPM, and will be disabled in the speaker power down event of DAPM. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-23 14:05:53 +08:00
ASoC: rt5645: add error checking to rt5645_probe function Check for return value from various snd_soc_dapm_* calls, as many of them can return errors and this should be handled. Also, reintroduce the allocation failure check for rt5645->eq_param as well. Make all areas where return values are checked lead to the end of the function in the case of an error. Finally, introduce a comment explaining how resources here are actually eventually cleaned up by the caller. Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Phillip Potter <phil@philpotter.co.uk> Link: https://lore.kernel.org/r/20210503115736.2104747-56-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-03 19:57:22 +08:00
if (!rt5645->eq_param)
ASoC: rt5645: Avoid upgrading static warnings to errors One of the fixes reverted as part of the UMN fallout was actually fine, however rather than undoing the revert the process that handled all this stuff resulted in a patch which attempted to add extra error checks instead. Unfortunately this new change wasn't really based on a good understanding of the subsystem APIs and bypassed the usual patch flow without ensuring it was reviewed by people with subsystem knowledge and was merged as a fix rather than during the merge window. The effect of the new fix is to upgrade what were previously warnings on static data in the code to hard errors on that data. If this actually happens then it would break existing systems, if it doesn't happen then the change has no effect so this was not a safe change to apply as a fix to the release candidates. Since the new code has not been tested and doesn't in practice improve error handling revert it instead, and also drop the original revert since the original fix was fine. This takes the driver back to what it was in -rc1. Fixes: 5e70b8e22b64e ("ASoC: rt5645: add error checking to rt5645_probe function") Fixes: 1e0ce84215dbf ("Revert "ASoC: rt5645: fix a NULL pointer dereference") Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Phillip Potter <phil@philpotter.co.uk> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20210608160713.21040-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> (cherry picked from commit 916cccb5078eee57fce131c5fe18e417545083e2) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-09 00:07:13 +08:00
return -ENOMEM;
return 0;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static void rt5645_remove(struct snd_soc_component *component)
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
rt5645_reset(component);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
}
#ifdef CONFIG_PM
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static int rt5645_suspend(struct snd_soc_component *component)
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
regcache_cache_only(rt5645->regmap, true);
regcache_mark_dirty(rt5645->regmap);
return 0;
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static int rt5645_resume(struct snd_soc_component *component)
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
struct rt5645_priv *rt5645 = snd_soc_component_get_drvdata(component);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
regcache_cache_only(rt5645->regmap, false);
ASoC: rt5645: Correct the cache sync function The patch corrects the cache sync function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08 14:47:37 +08:00
regcache_sync(rt5645->regmap);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
return 0;
}
#else
#define rt5645_suspend NULL
#define rt5645_resume NULL
#endif
#define RT5645_STEREO_RATES SNDRV_PCM_RATE_8000_96000
#define RT5645_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S8)
ASoC: Constify snd_soc_dai_ops variables The snd_soc_dai_ops variables are not modified after initialization in these drivers, so make them const. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-15 15:38:14 +08:00
static const struct snd_soc_dai_ops rt5645_aif_dai_ops = {
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
.hw_params = rt5645_hw_params,
.set_fmt = rt5645_set_dai_fmt,
.set_sysclk = rt5645_set_dai_sysclk,
.set_tdm_slot = rt5645_set_tdm_slot,
.set_pll = rt5645_set_dai_pll,
};
ASoC: rt5645: Staticise non-exported symbols The patch is for staticising non-exported symbols Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08 14:47:35 +08:00
static struct snd_soc_dai_driver rt5645_dai[] = {
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{
.name = "rt5645-aif1",
.id = RT5645_AIF1,
.playback = {
.stream_name = "AIF1 Playback",
.channels_min = 1,
.channels_max = 2,
.rates = RT5645_STEREO_RATES,
.formats = RT5645_FORMATS,
},
.capture = {
.stream_name = "AIF1 Capture",
.channels_min = 1,
ASoC: rt5645: Allow 4 channel recording on AIF1 The codec supports 4 channel recording with TDM on AIF1. This patch modifies the DAI capability to allow it. Signed-off-by: Ben Zhang <benzh@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-29 04:32:37 +08:00
.channels_max = 4,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
.rates = RT5645_STEREO_RATES,
.formats = RT5645_FORMATS,
},
.ops = &rt5645_aif_dai_ops,
},
{
.name = "rt5645-aif2",
.id = RT5645_AIF2,
.playback = {
.stream_name = "AIF2 Playback",
.channels_min = 1,
.channels_max = 2,
.rates = RT5645_STEREO_RATES,
.formats = RT5645_FORMATS,
},
.capture = {
.stream_name = "AIF2 Capture",
.channels_min = 1,
.channels_max = 2,
.rates = RT5645_STEREO_RATES,
.formats = RT5645_FORMATS,
},
.ops = &rt5645_aif_dai_ops,
},
};
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
static const struct snd_soc_component_driver soc_component_dev_rt5645 = {
.probe = rt5645_probe,
.remove = rt5645_remove,
.suspend = rt5645_suspend,
.resume = rt5645_resume,
.set_bias_level = rt5645_set_bias_level,
.controls = rt5645_snd_controls,
.num_controls = ARRAY_SIZE(rt5645_snd_controls),
.dapm_widgets = rt5645_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(rt5645_dapm_widgets),
.dapm_routes = rt5645_dapm_routes,
.num_dapm_routes = ARRAY_SIZE(rt5645_dapm_routes),
ASoC: rt5645: implement set_jack callback Add a wrapper function to support set_jack component driver callback. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230705042349.24905-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-05 12:23:48 +08:00
.set_jack = rt5645_component_set_jack,
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
.use_pmdown_time = 1,
.endianness = 1,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
};
static const struct regmap_config rt5645_regmap = {
.reg_bits = 8,
.val_bits = 16,
regmap: split up regmap_config.use_single_rw Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-02 00:50:41 +08:00
.use_single_read = true,
.use_single_write = true,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
.max_register = RT5645_VENDOR_ID2 + 1 + (ARRAY_SIZE(rt5645_ranges) *
RT5645_PR_SPACING),
.volatile_reg = rt5645_volatile_register,
.readable_reg = rt5645_readable_register,
ASoC: rt5645: Use maple tree register cache The rt5645 can only support single register read and write operations so does not benefit from block writes. This means it gets no benefit from using the rbtree register cache over the maple tree register cache so convert it to use maple trees instead, it is more modern. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-9-729c6553cdcf@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-10 21:57:55 +08:00
.cache_type = REGCACHE_MAPLE,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
.reg_defaults = rt5645_reg,
.num_reg_defaults = ARRAY_SIZE(rt5645_reg),
.ranges = rt5645_ranges,
.num_ranges = ARRAY_SIZE(rt5645_ranges),
};
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
static const struct regmap_config rt5650_regmap = {
.reg_bits = 8,
.val_bits = 16,
regmap: split up regmap_config.use_single_rw Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-02 00:50:41 +08:00
.use_single_read = true,
.use_single_write = true,
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
.max_register = RT5645_VENDOR_ID2 + 1 + (ARRAY_SIZE(rt5645_ranges) *
RT5645_PR_SPACING),
.volatile_reg = rt5645_volatile_register,
.readable_reg = rt5645_readable_register,
ASoC: rt5645: Use maple tree register cache The rt5645 can only support single register read and write operations so does not benefit from block writes. This means it gets no benefit from using the rbtree register cache over the maple tree register cache so convert it to use maple trees instead, it is more modern. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20230609-asoc-rt-maple-v1-9-729c6553cdcf@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2023-06-10 21:57:55 +08:00
.cache_type = REGCACHE_MAPLE,
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
.reg_defaults = rt5650_reg,
.num_reg_defaults = ARRAY_SIZE(rt5650_reg),
.ranges = rt5645_ranges,
.num_ranges = ARRAY_SIZE(rt5645_ranges),
};
static const struct regmap_config temp_regmap = {
.name="nocache",
.reg_bits = 8,
.val_bits = 16,
regmap: split up regmap_config.use_single_rw Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-02 00:50:41 +08:00
.use_single_read = true,
.use_single_write = true,
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
.max_register = RT5645_VENDOR_ID2 + 1,
.cache_type = REGCACHE_NONE,
};
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
static const struct i2c_device_id rt5645_i2c_id[] = {
{ "rt5645", 0 },
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
{ "rt5650", 0 },
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{ }
};
MODULE_DEVICE_TABLE(i2c, rt5645_i2c_id);
ASoc: rt5645: Add OF device ID table The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Before this patch: $ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias alias: acpi*:10EC3270:* alias: acpi*:10EC5640:* alias: acpi*:10EC5650:* alias: acpi*:10EC5648:* alias: acpi*:10EC5645:* alias: i2c:rt5650 alias: i2c:rt5645 After this patch: $ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias alias: of:N*T*Crealtek,rt5650C* alias: of:N*T*Crealtek,rt5650 alias: of:N*T*Crealtek,rt5645C* alias: of:N*T*Crealtek,rt5645 alias: acpi*:10EC3270:* alias: acpi*:10EC5640:* alias: acpi*:10EC5650:* alias: acpi*:10EC5648:* alias: acpi*:10EC5645:* alias: i2c:rt5650 alias: i2c:rt5645 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 03:26:25 +08:00
#ifdef CONFIG_OF
static const struct of_device_id rt5645_of_match[] = {
{ .compatible = "realtek,rt5645", },
{ .compatible = "realtek,rt5650", },
{ }
};
MODULE_DEVICE_TABLE(of, rt5645_of_match);
#endif
ASoC: rt5645: Add ACPI match ID This patch adds the ACPI match ID for rt5645/5650 codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-24 07:35:17 +08:00
#ifdef CONFIG_ACPI
ASoC: rt5645: Constify ACPI device ids Constify the ACPI device ID array, no need to have it writable at runtime. Also drop the unused RT5645_INIT_REG_LEN define. Signed-off-by: Mathias Krause <minipli@googlemail.com> Cc: Bard Liao <bardliao@realtek.com> Cc: Oder Chiou <oder_chiou@realtek.com> Cc: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-03 06:23:56 +08:00
static const struct acpi_device_id rt5645_acpi_match[] = {
ASoC: rt5645: Add ACPI match ID This patch adds the ACPI match ID for rt5645/5650 codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-24 07:35:17 +08:00
{ "10EC5645", 0 },
ASoC: rt5645: add support for RT5648 add ACPI ID 10EC5648 found e.g on Asus X205TA and use rt5645 driver Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-27 04:09:36 +08:00
{ "10EC5648", 0 },
ASoC: rt5645: Add ACPI match ID This patch adds the ACPI match ID for rt5645/5650 codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-24 07:35:17 +08:00
{ "10EC5650", 0 },
ASoC: rt5645: Add ACPI ID 10EC5640 Some CHT platforms use RT5645 codec which has entry 10EC5640 so add it. Also add DMI quirk for jack detection. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001 [Jack detection] Suggested-by: Stephen Just <stephenjust@gmail.com> Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08 18:09:50 +08:00
{ "10EC5640", 0 },
ASoc: rt5645: add ACPI ID 10EC3270 ALC3270 is a low-cost version of RT5645, add ACPI ID to enable probe and use rt5645 codec driver Tested on Asus T100HA Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-01-27 04:09:37 +08:00
{ "10EC3270", 0 },
ASoC: rt5645: Add ACPI match ID This patch adds the ACPI match ID for rt5645/5650 codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-24 07:35:17 +08:00
{},
};
MODULE_DEVICE_TABLE(acpi, rt5645_acpi_match);
#endif
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
static const struct rt5645_platform_data intel_braswell_platform_data = {
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
.dmic1_data_pin = RT5645_DMIC1_DISABLE,
ASoC: rt5645: set platform data base on DMI set platform specific data for intel strago platform Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-25 08:50:54 +08:00
.dmic2_data_pin = RT5645_DMIC_DATA_IN2P,
.jd_mode = 3,
};
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
static const struct rt5645_platform_data buddy_platform_data = {
.dmic1_data_pin = RT5645_DMIC_DATA_GPIO5,
.dmic2_data_pin = RT5645_DMIC_DATA_IN2P,
ASoC: rt5645: Fixed buddy jack support. The headphone jack on buddy was broken with the following commit: commit 6b5da66322c5 ("ASoC: rt5645: read jd1_1 status for jd detection"). This changes the jd_mode for buddy to 4 so buddy can read from the same register that was used in the working version of this driver without affecting any other devices that might use this, since no other device uses jd_mode = 4. To test this I plugged and uplugged the headphone jack, verifying audio works. Signed-off-by: Jacob Rasmussen <jacobraz@google.com> Reviewed-by: Ross Zwisler <zwisler@google.com> Link: https://lore.kernel.org/r/20191111185957.217244-1-jacobraz@google.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-11-12 02:59:57 +08:00
.jd_mode = 4,
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
.level_trigger_irq = true,
};
static const struct rt5645_platform_data gpd_win_platform_data = {
.jd_mode = 3,
.inv_jd1_1 = true,
.long_name = "gpd-win-pocket-rt5645",
/* The GPD pocket has a diff. mic, for the win this does not matter. */
.in2_diff = true,
};
static const struct rt5645_platform_data asus_t100ha_platform_data = {
.dmic1_data_pin = RT5645_DMIC_DATA_IN2N,
.dmic2_data_pin = RT5645_DMIC2_DISABLE,
.jd_mode = 3,
.inv_jd1_1 = true,
};
ASoC: rt5645: Add platform-data for Asus T101HA The Asus T101HA uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like the Asus T100HA. Note unlike the T100HA its jack-detect is not inverted. Add a DMI quirk with the correct settings for this model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200608204634.93407-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-09 04:46:34 +08:00
static const struct rt5645_platform_data asus_t101ha_platform_data = {
.dmic1_data_pin = RT5645_DMIC_DATA_IN2N,
.dmic2_data_pin = RT5645_DMIC2_DISABLE,
.jd_mode = 3,
};
ASoC: rt5645: Add platform-data for Lenovo Ideapad Mixx 310 The Lenovo Ideapad Mixx 310 has a differential internal analog mic, add platform-data for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-29 04:25:02 +08:00
static const struct rt5645_platform_data lenovo_ideapad_miix_310_pdata = {
.jd_mode = 3,
.in2_diff = true,
};
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
static const struct rt5645_platform_data jd_mode3_platform_data = {
.jd_mode = 3,
};
ASoC: rt5645: Headphone Jack sense inverts on the LattePanda board The LattePanda board has a sound card chtrt5645, when there is nothing plugged in the headphone jack, the system thinks the headphone is plugged in, while we plug a headphone in the jack, the system thinks the headphone is unplugged. If adding quirk=0x21 in the module parameter, the headphone jack can work well. So let us fix it via platform_data. https://bugs.launchpad.net/bugs/182459 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-29 11:44:07 +08:00
static const struct rt5645_platform_data lattepanda_board_platform_data = {
.jd_mode = 2,
.inv_jd1_1 = true
};
ASoC: rt5650: Add Kahlee platform specfic changes Add platform specific data for Kahlee project. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Shirish S <shirish.s@amd.com> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191023212948.92246-1-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-24 05:29:47 +08:00
static const struct rt5645_platform_data kahlee_platform_data = {
.dmic1_data_pin = RT5645_DMIC_DATA_GPIO5,
.dmic2_data_pin = RT5645_DMIC_DATA_IN2P,
.jd_mode = 3,
};
ASoC: rt5645: Enable internal microphone and JD on ECS EF20 On ECS EF20 series laptops, the internal mic is on DMIC2/IN2P. And they need the inv_hp_det to make jack detection to work as exoected. Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20210111054141.4668-5-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-11 13:41:41 +08:00
static const struct rt5645_platform_data ecs_ef20_platform_data = {
.dmic1_data_pin = RT5645_DMIC1_DISABLE,
.dmic2_data_pin = RT5645_DMIC_DATA_IN2P,
.inv_hp_pol = 1,
};
ASoC: rt5645: Add ACPI-defined GPIO for ECS EF20 series Add the hp-detect gpio for ECS EF20 series laptops based on the _CRS defined in DSDT table. Method (_CRS, 0, NotSerialized) { Name (SBUF, ResourceTemplate () { I2cSerialBusV2 (0x001A, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x0000, "\\_SB.GPO3", 0x00, ResourceConsumer, , ) { // Pin list 0x004F } GpioIo (Shared, PullDefault, 0x0000, 0x0000, IoRestrictionInputOnly, "\\_SB.GPO3", 0x00, ResourceConsumer, , ) { // Pin list 0x004F } }) Return (SBUF) /* \_SB_.PCI0.I2C2.RTK2._CRS.SBUF */ } Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20210111054141.4668-3-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-11 13:41:39 +08:00
static const struct acpi_gpio_params ef20_hp_detect = { 1, 0, false };
static const struct acpi_gpio_mapping cht_rt5645_ef20_gpios[] = {
{ "hp-detect-gpios", &ef20_hp_detect, 1 },
{ },
};
static int cht_rt5645_ef20_quirk_cb(const struct dmi_system_id *id)
{
cht_rt5645_gpios = cht_rt5645_ef20_gpios;
return 1;
}
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
static const struct dmi_system_id dmi_platform_data[] = {
{
.ident = "Chrome Buddy",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Buddy"),
},
.driver_data = (void *)&buddy_platform_data,
},
ASoC: rt5645: set platform data base on DMI set platform specific data for intel strago platform Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-25 08:50:54 +08:00
{
.ident = "Intel Strago",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Strago"),
},
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
.driver_data = (void *)&intel_braswell_platform_data,
ASoC: rt5645: set platform data base on DMI set platform specific data for intel strago platform Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-25 08:50:54 +08:00
},
ASoC: rt5645: Add struct dmi_system_id "Google Celes" for chrome platform Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-08-25 16:03:48 +08:00
{
ASoC: rt5645: merge DMI tables of google projects There are more and more google projects need to use DMI to get the platform data configuration. And those projects use the same configuration. To clean those redundant code, we define a general DMI for those projects with the same platform data configuration. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-30 14:10:21 +08:00
.ident = "Google Chrome",
ASoC: rt5645: Add dmi_system_id "Google Terra" Add platform specific data for Terra project. Signed-off-by: Luke_Yin@asus.com <Luke_Yin@asus.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-24 10:55:29 +08:00
.matches = {
ASoC: rt5645: merge DMI tables of google projects There are more and more google projects need to use DMI to get the platform data configuration. And those projects use the same configuration. To clean those redundant code, we define a general DMI for those projects with the same platform data configuration. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-30 14:10:21 +08:00
DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
ASoC: rt5645: Add dmi_system_id "Google Terra" Add platform specific data for Terra project. Signed-off-by: Luke_Yin@asus.com <Luke_Yin@asus.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-24 10:55:29 +08:00
},
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
.driver_data = (void *)&intel_braswell_platform_data,
ASoC: rt5645: Add dmi_system_id "Google Terra" Add platform specific data for Terra project. Signed-off-by: Luke_Yin@asus.com <Luke_Yin@asus.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-24 10:55:29 +08:00
},
ASoC: rt5645: Add dmi_system_id "Google Setzer" Add platform specific data for Setzer project. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-15 10:40:17 +08:00
{
.ident = "Google Setzer",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Setzer"),
},
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
.driver_data = (void *)&intel_braswell_platform_data,
ASoC: rt5645: Add dmi_system_id "Google Setzer" Add platform specific data for Setzer project. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-15 10:40:17 +08:00
},
ASoC: rt5645: Add ACPI ID 10EC5640 Some CHT platforms use RT5645 codec which has entry 10EC5640 so add it. Also add DMI quirk for jack detection. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001 [Jack detection] Suggested-by: Stephen Just <stephenjust@gmail.com> Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08 18:09:50 +08:00
{
.ident = "Microsoft Surface 3",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Surface 3"),
},
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
.driver_data = (void *)&intel_braswell_platform_data,
ASoC: rt5645: Add ACPI ID 10EC5640 Some CHT platforms use RT5645 codec which has entry 10EC5640 so add it. Also add DMI quirk for jack detection. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98001 [Jack detection] Suggested-by: Stephen Just <stephenjust@gmail.com> Signed-off-by: Sachin Mokashi <sachinx.mokashi@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-07-08 18:09:50 +08:00
},
ASoC: rt5645: Add jack detection workaround for GPD Win GPD Win requires jd_mode=3 and the inverted flag for making the jack detection working. Unfortunately, the BIOS doesn't give a nice way to match with DMI strings, and the only working way so far is to match with the board vendor/name/version/date to some known patterns. Hopefully other vendors won't do such a stupid setup, too... Thanks to Hans de Goede for the DMI matching suggestion. Suggested-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:39 +08:00
{
/*
* Match for the GPDwin which unfortunately uses somewhat
* generic dmi strings, which is why we test for 4 strings.
* Comparing against 23 other byt/cht boards, board_vendor
* and board_name are unique to the GPDwin, where as only one
* other board has the same board_serial and 3 others have
* the same default product_name. Also the GPDwin is the
* only device to have both board_ and product_name not set.
*/
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
.ident = "GPD Win / Pocket",
ASoC: rt5645: Add jack detection workaround for GPD Win GPD Win requires jd_mode=3 and the inverted flag for making the jack detection working. Unfortunately, the BIOS doesn't give a nice way to match with DMI strings, and the only working way so far is to match with the board vendor/name/version/date to some known patterns. Hopefully other vendors won't do such a stupid setup, too... Thanks to Hans de Goede for the DMI matching suggestion. Suggested-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:39 +08:00
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_MATCH(DMI_BOARD_NAME, "Default string"),
DMI_MATCH(DMI_BOARD_SERIAL, "Default string"),
DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
},
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
.driver_data = (void *)&gpd_win_platform_data,
ASoC: rt5645: Add jack detection workaround for GPD Win GPD Win requires jd_mode=3 and the inverted flag for making the jack detection working. Unfortunately, the BIOS doesn't give a nice way to match with DMI strings, and the only working way so far is to match with the board vendor/name/version/date to some known patterns. Hopefully other vendors won't do such a stupid setup, too... Thanks to Hans de Goede for the DMI matching suggestion. Suggested-by: Hans de Goede <hdegoede@redhat.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:39 +08:00
},
ASoC: codecs: rt5645: add quirks for Asus T100HA Fix jack detection and dmic setup Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-23 04:32:35 +08:00
{
.ident = "ASUS T100HAN",
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "T100HAN"),
},
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
.driver_data = (void *)&asus_t100ha_platform_data,
ASoC: codecs: rt5645: add quirks for Asus T100HA Fix jack detection and dmic setup Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-23 04:32:35 +08:00
},
ASoC: rt5645: Add platform-data for Asus T101HA The Asus T101HA uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like the Asus T100HA. Note unlike the T100HA its jack-detect is not inverted. Add a DMI quirk with the correct settings for this model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200608204634.93407-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-06-09 04:46:34 +08:00
{
.ident = "ASUS T101HA",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
DMI_MATCH(DMI_PRODUCT_NAME, "T101HA"),
},
.driver_data = (void *)&asus_t101ha_platform_data,
},
ASoC: rt5645: Add jack detection workaround for MINIX Z83-4 based devices The MINIX NEO Z83-4 and MINIX NEO Z83-4 Pro devices requires jd_mode=3 to make the jack detection work. Using a BIOS DMI product of "Z83-4" will match both devices of 'NEO Z83-4' and 'Z83-4 Pro'. Signed-off-by: Ian W Morrison <ianwmorrison@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-31 06:35:47 +08:00
{
.ident = "MINIX Z83-4",
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MINIX"),
DMI_MATCH(DMI_PRODUCT_NAME, "Z83-4"),
},
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
.driver_data = (void *)&jd_mode3_platform_data,
ASoC: rt5645: Add jack detection workaround for MINIX Z83-4 based devices The MINIX NEO Z83-4 and MINIX NEO Z83-4 Pro devices requires jd_mode=3 to make the jack detection work. Using a BIOS DMI product of "Z83-4" will match both devices of 'NEO Z83-4' and 'Z83-4 Pro'. Signed-off-by: Ian W Morrison <ianwmorrison@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-31 06:35:47 +08:00
},
ASoC: rt5645: add platform data for the Teclast X80 Pro tablet The Teclast X80 Pro tablet needs jd_mode = 3 for headset jack detection. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:13 +08:00
{
.ident = "Teclast X80 Pro",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "TECLAST"),
DMI_MATCH(DMI_PRODUCT_NAME, "X80 Pro"),
},
.driver_data = (void *)&jd_mode3_platform_data,
ASoC: rt5645: Add jack detection workaround for MINIX Z83-4 based devices The MINIX NEO Z83-4 and MINIX NEO Z83-4 Pro devices requires jd_mode=3 to make the jack detection work. Using a BIOS DMI product of "Z83-4" will match both devices of 'NEO Z83-4' and 'Z83-4 Pro'. Signed-off-by: Ian W Morrison <ianwmorrison@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-31 06:35:47 +08:00
},
ASoC: rt5645: Add platform-data for Lenovo Ideapad Mixx 310 The Lenovo Ideapad Mixx 310 has a differential internal analog mic, add platform-data for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-29 04:25:02 +08:00
{
.ident = "Lenovo Ideapad Miix 310",
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "80SG"),
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "MIIX 310-10ICR"),
},
.driver_data = (void *)&lenovo_ideapad_miix_310_pdata,
},
ASoC: rt5645: Add platform-data for Lenovo Ideapad Mixx 320 The Lenovo Ideapad Mixx 320 has a digital mic connected to DMIC2 add a DMI based quirk pointing to the intel_braswell_platform_data for devices with a mic on DMIC2. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-29 04:25:03 +08:00
{
.ident = "Lenovo Ideapad Miix 320",
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "LENOVO"),
DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "80XF"),
DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "Lenovo MIIX 320-10ICR"),
},
.driver_data = (void *)&intel_braswell_platform_data,
},
ASoC: rt5645: Headphone Jack sense inverts on the LattePanda board The LattePanda board has a sound card chtrt5645, when there is nothing plugged in the headphone jack, the system thinks the headphone is plugged in, while we plug a headphone in the jack, the system thinks the headphone is unplugged. If adding quirk=0x21 in the module parameter, the headphone jack can work well. So let us fix it via platform_data. https://bugs.launchpad.net/bugs/182459 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-29 11:44:07 +08:00
{
.ident = "LattePanda board",
.matches = {
DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
DMI_EXACT_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
DMI_EXACT_MATCH(DMI_BOARD_VERSION, "Default string"),
ASoC: rt5645: Make LattePanda board DMI match more precise [ Upstream commit 551539a8606e28cb2a130f8ef3e9834235b456c4 ] The DMI strings used for the LattePanda board DMI quirks are very generic. Using the dmidecode database from https://linux-hardware.org/ shows that the chosen DMI strings also match the following 2 laptops which also have a rt5645 codec: Insignia NS-P11W7100 https://linux-hardware.org/?computer=E092FFF8BA04 Insignia NS-P10W8100 https://linux-hardware.org/?computer=AFB6C0BF7934 All 4 hw revisions of the LattePanda board have "S70CR" in their BIOS version DMI strings: DF-BI-7-S70CR100-* DF-BI-7-S70CR110-* DF-BI-7-S70CR200-* LP-BS-7-S70CR700-* See e.g. https://linux-hardware.org/?computer=D98250A817C0 Add a partial (non exact) DMI match on this string to make the LattePanda board DMI match more precise to avoid false-positive matches. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20240211212736.179605-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-12 05:27:35 +08:00
/*
* Above strings are too generic, LattePanda BIOS versions for
* all 4 hw revisions are:
* DF-BI-7-S70CR100-*
* DF-BI-7-S70CR110-*
* DF-BI-7-S70CR200-*
* LP-BS-7-S70CR700-*
* Do a partial match for S70CR to avoid false positive matches.
*/
DMI_MATCH(DMI_BIOS_VERSION, "S70CR"),
ASoC: rt5645: Headphone Jack sense inverts on the LattePanda board The LattePanda board has a sound card chtrt5645, when there is nothing plugged in the headphone jack, the system thinks the headphone is plugged in, while we plug a headphone in the jack, the system thinks the headphone is unplugged. If adding quirk=0x21 in the module parameter, the headphone jack can work well. So let us fix it via platform_data. https://bugs.launchpad.net/bugs/182459 Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-04-29 11:44:07 +08:00
},
.driver_data = (void *)&lattepanda_board_platform_data,
},
ASoC: rt5650: Add Kahlee platform specfic changes Add platform specific data for Kahlee project. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Shirish S <shirish.s@amd.com> Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Link: https://lore.kernel.org/r/20191023212948.92246-1-cujomalainey@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-24 05:29:47 +08:00
{
.ident = "Chrome Kahlee",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "Kahlee"),
},
.driver_data = (void *)&kahlee_platform_data,
},
ASoC: rt5645: Add platform-data for Medion E1239T The Medion E1239T uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like other models following Intel's Brasswell's reference design. This commit adds a DMI quirk pointing to the intel_braswell_platform_data for this model. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200402185257.3355-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-04-03 02:52:57 +08:00
{
.ident = "Medion E1239T",
.matches = {
DMI_EXACT_MATCH(DMI_SYS_VENDOR, "MEDION"),
DMI_MATCH(DMI_PRODUCT_NAME, "E1239T MD60568"),
},
.driver_data = (void *)&intel_braswell_platform_data,
},
ASoC: rt5645: Add ACPI-defined GPIO for ECS EF20 series Add the hp-detect gpio for ECS EF20 series laptops based on the _CRS defined in DSDT table. Method (_CRS, 0, NotSerialized) { Name (SBUF, ResourceTemplate () { I2cSerialBusV2 (0x001A, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x0000, "\\_SB.GPO3", 0x00, ResourceConsumer, , ) { // Pin list 0x004F } GpioIo (Shared, PullDefault, 0x0000, 0x0000, IoRestrictionInputOnly, "\\_SB.GPO3", 0x00, ResourceConsumer, , ) { // Pin list 0x004F } }) Return (SBUF) /* \_SB_.PCI0.I2C2.RTK2._CRS.SBUF */ } Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20210111054141.4668-3-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-11 13:41:39 +08:00
{
.ident = "EF20",
.callback = cht_rt5645_ef20_quirk_cb,
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "EF20"),
},
ASoC: rt5645: Enable internal microphone and JD on ECS EF20 On ECS EF20 series laptops, the internal mic is on DMIC2/IN2P. And they need the inv_hp_det to make jack detection to work as exoected. Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20210111054141.4668-5-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-11 13:41:41 +08:00
.driver_data = (void *)&ecs_ef20_platform_data,
ASoC: rt5645: Add ACPI-defined GPIO for ECS EF20 series Add the hp-detect gpio for ECS EF20 series laptops based on the _CRS defined in DSDT table. Method (_CRS, 0, NotSerialized) { Name (SBUF, ResourceTemplate () { I2cSerialBusV2 (0x001A, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.PCI0.I2C2", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Edge, ActiveBoth, SharedAndWake, PullNone, 0x0000, "\\_SB.GPO3", 0x00, ResourceConsumer, , ) { // Pin list 0x004F } GpioIo (Shared, PullDefault, 0x0000, 0x0000, IoRestrictionInputOnly, "\\_SB.GPO3", 0x00, ResourceConsumer, , ) { // Pin list 0x004F } }) Return (SBUF) /* \_SB_.PCI0.I2C2.RTK2._CRS.SBUF */ } Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20210111054141.4668-3-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-11 13:41:39 +08:00
},
ASoC: rt5645: Add jack detection workaround for MINIX Z83-4 based devices The MINIX NEO Z83-4 and MINIX NEO Z83-4 Pro devices requires jd_mode=3 to make the jack detection work. Using a BIOS DMI product of "Z83-4" will match both devices of 'NEO Z83-4' and 'Z83-4 Pro'. Signed-off-by: Ian W Morrison <ianwmorrison@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-08-31 06:35:47 +08:00
{ }
};
ASoC: rt5645: merge DMI tables of google projects There are more and more google projects need to use DMI to get the platform data configuration. And those projects use the same configuration. To clean those redundant code, we define a general DMI for those projects with the same platform data configuration. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-30 14:10:21 +08:00
static bool rt5645_check_dp(struct device *dev)
{
if (device_property_present(dev, "realtek,in2-differential") ||
ASoC: rt5645: add fallback case for jack detection support Commit 78f5605c0329 ("ASoC: rt5645: cleanup DMI matching code") did a lot of useful cleanups. This patch adds a default case to enable jack detection if there is no pdata, device property or quirk. The chosen jd-mode3 is the most common and should limit the addition of new DMI-based quirks. Existing DMI quirks which only set this mode are left as is and not removed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12 04:05:11 +08:00
device_property_present(dev, "realtek,dmic1-data-pin") ||
device_property_present(dev, "realtek,dmic2-data-pin") ||
device_property_present(dev, "realtek,jd-mode"))
ASoC: rt5645: merge DMI tables of google projects There are more and more google projects need to use DMI to get the platform data configuration. And those projects use the same configuration. To clean those redundant code, we define a general DMI for those projects with the same platform data configuration. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-30 14:10:21 +08:00
return true;
return false;
}
ASoC: rt5645: Add dmi for Broadwell Add DMI data for Buddy project. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-21 14:12:00 +08:00
ASoC: rt5645: Add the device tree parser Modify the RT5645 driver to parse platform data from device tree. This is missing from previous patch in sound/soc/codecs/rt5645.c, that was present in v3. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 14:47:36 +08:00
static int rt5645_parse_dt(struct rt5645_priv *rt5645, struct device *dev)
{
rt5645->pdata.in2_diff = device_property_read_bool(dev,
"realtek,in2-differential");
device_property_read_u32(dev,
"realtek,dmic1-data-pin", &rt5645->pdata.dmic1_data_pin);
device_property_read_u32(dev,
"realtek,dmic2-data-pin", &rt5645->pdata.dmic2_data_pin);
device_property_read_u32(dev,
"realtek,jd-mode", &rt5645->pdata.jd_mode);
return 0;
}
ASoC: rt*: use simple i2c probe function The i2c probe functions here don't use the id information provided in their second argument, so the single-parameter i2c probe function ("probe_new") can be used instead. This avoids scanning the identifier tables during probes. Signed-off-by: Stephen Kitt <steve@sk2.org> Link: https://lore.kernel.org/r/20220405130326.2107293-1-steve@sk2.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-04-05 21:03:26 +08:00
static int rt5645_i2c_probe(struct i2c_client *i2c)
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{
ASoC: rt5645: Move rt5645_platform_data to sound/soc/codecs/rt5645.c sound/soc/codecs/rt5645.c is the only user of the rt5645_platform_data, move its definition to sound/soc/codecs/rt5645.c and remove the now empty include/sound/rt5645.h file. Note since the DMI quirk mechanism uses pointers to the rt5645_platform_data struct we can NOT simply add its members to the rt5645_priv struct and completely remove the struct. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210306230223.516566-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-07 07:02:22 +08:00
struct rt5645_platform_data *pdata = NULL;
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
const struct dmi_system_id *dmi_data;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
struct rt5645_priv *rt5645;
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
int ret, i;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
unsigned int val;
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
struct regmap *regmap;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
rt5645 = devm_kzalloc(&i2c->dev, sizeof(struct rt5645_priv),
GFP_KERNEL);
if (rt5645 == NULL)
return -ENOMEM;
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
rt5645->i2c = i2c;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
i2c_set_clientdata(i2c, rt5645);
ASoC: rt5645: cleanup DMI matching code Rather then doing a dmi_check_system() per possible system use an array with all known systems, with dmi_system_id.driver_data pointing to the platform-data for the matching system. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03 02:53:12 +08:00
dmi_data = dmi_first_match(dmi_platform_data);
if (dmi_data) {
dev_info(&i2c->dev, "Detected %s platform\n", dmi_data->ident);
pdata = dmi_data->driver_data;
}
ASoC: rt5645: Add the device tree parser Modify the RT5645 driver to parse platform data from device tree. This is missing from previous patch in sound/soc/codecs/rt5645.c, that was present in v3. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 14:47:36 +08:00
if (pdata)
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
rt5645->pdata = *pdata;
ASoC: rt5645: merge DMI tables of google projects There are more and more google projects need to use DMI to get the platform data configuration. And those projects use the same configuration. To clean those redundant code, we define a general DMI for those projects with the same platform data configuration. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-30 14:10:21 +08:00
else if (rt5645_check_dp(&i2c->dev))
ASoC: rt5645: Add the device tree parser Modify the RT5645 driver to parse platform data from device tree. This is missing from previous patch in sound/soc/codecs/rt5645.c, that was present in v3. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 14:47:36 +08:00
rt5645_parse_dt(rt5645, &i2c->dev);
ASoC: rt5645: add fallback case for jack detection support Commit 78f5605c0329 ("ASoC: rt5645: cleanup DMI matching code") did a lot of useful cleanups. This patch adds a default case to enable jack detection if there is no pdata, device property or quirk. The chosen jd-mode3 is the most common and should limit the addition of new DMI-based quirks. Existing DMI quirks which only set this mode are left as is and not removed. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12 04:05:11 +08:00
else
rt5645->pdata = jd_mode3_platform_data;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: Add quirk override by module option For making the development easier, add quirk module option to override the platform data setup. For example, a platform with inverted jack detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 = jd_mode=2). It overrides the whole pdata fields, so pass it carefully. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: James Cameron <quozl@laptop.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-30 00:08:33 +08:00
if (quirk != -1) {
rt5645->pdata.in2_diff = QUIRK_IN2_DIFF(quirk);
rt5645->pdata.level_trigger_irq = QUIRK_LEVEL_IRQ(quirk);
rt5645->pdata.inv_jd1_1 = QUIRK_INV_JD1_1(quirk);
ASoC: rt5645: add inv_hp_det flag The ECS EF20EA laptop use gpio for jack detection instead of rt5645 rt5645 JD. However, the GPIO polarity is inverse for hp-detect based on the _DSD property of the RTK2 device. Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"hp-detect-gpio", Package() {^RTK2, 0, 0, 1 }}, } }) This flag will invert the hp-detect gpio polarity. Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20210111054141.4668-4-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-11 13:41:40 +08:00
rt5645->pdata.inv_hp_pol = QUIRK_INV_HP_POL(quirk);
ASoC: rt5645: Add quirk override by module option For making the development easier, add quirk module option to override the platform data setup. For example, a platform with inverted jack detection with jd_mode=2, pass the value 0x21 (0x1 = inv_jd1_1, 0x20 = jd_mode=2). It overrides the whole pdata fields, so pass it carefully. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: James Cameron <quozl@laptop.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-30 00:08:33 +08:00
rt5645->pdata.jd_mode = QUIRK_JD_MODE(quirk);
rt5645->pdata.dmic1_data_pin = QUIRK_DMIC1_DATA_PIN(quirk);
rt5645->pdata.dmic2_data_pin = QUIRK_DMIC2_DATA_PIN(quirk);
}
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: The ALC3270 variant does not have a headset-mic pin The Asus T100HA and T101HA 2-in-1s use a rt5645 family codec and always report that a headset (rather then headphones) are plugged in even when regular headphones are plugged in. And when a headset is used, then the headset-microphone does not work. According to RealTek the ALC3270 variant used in these devices does not support headsets only headphones. Since the ALC3270 is a budget version of the regular ALC5645 codec, I assume that it is using a package with less pins and the headset-mic pin is simply not connected. Detect if the codec is an ALC3270 based on the ACPI HID and if it is an ALC3270 then always report SND_JACK_MICROPHONE as false, so that userspace will not try to use the not-connected headset-mic. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210306230223.516566-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-07 07:02:23 +08:00
if (has_acpi_companion(&i2c->dev)) {
if (cht_rt5645_gpios) {
if (devm_acpi_dev_add_driver_gpios(&i2c->dev, cht_rt5645_gpios))
dev_dbg(&i2c->dev, "Failed to add driver gpios\n");
}
/* The ALC3270 package has the headset-mic pin not-connected */
if (acpi_dev_hid_uid_match(ACPI_COMPANION(&i2c->dev), "10EC3270", NULL))
rt5645->pdata.no_headset_mic = true;
}
ASoC: rt5645: Introduce mapping for ACPI-defined GPIO On at least one laptop (ECS EF20EA) the 'hp-detect' GPIO is defined in the DSDT table by the ACPI GpioIo resources in _CRS. The GPIO related information should be mapped to the rt5645 driver to enable the jack detection also on non-DT platforms. Signed-off-by: Chris Chiu <chiu@endlessos.org> Link: https://lore.kernel.org/r/20210111054141.4668-2-chiu@endlessos.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-11 13:41:38 +08:00
ASoC: rt5645: Use devm_gpiod_get_optional for hp-detect Since hp-detect is optional, use devm_gpiod_get_optional instead. In additional, it should return error if devm_gpiod_get_optional fails. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-12 17:19:15 +08:00
rt5645->gpiod_hp_det = devm_gpiod_get_optional(&i2c->dev, "hp-detect",
GPIOD_IN);
ASoC: rt5645: change gpio to gpiod APIs Move gpio to gpio_desc and use gpiod APIs in codec driver. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10 14:27:57 +08:00
if (IS_ERR(rt5645->gpiod_hp_det)) {
ASoC: rt5645: fix error handling for gpio detection Optional gpio handling should not cause an error status and prevent probing if it's missing. Remove error return for -ENOENT case and move error message to dev_info Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-02-02 02:27:04 +08:00
dev_info(&i2c->dev, "failed to initialize gpiod\n");
ret = PTR_ERR(rt5645->gpiod_hp_det);
/*
* Continue if optional gpiod is missing, bail for all other
* errors, including -EPROBE_DEFER
*/
if (ret != -ENOENT)
return ret;
ASoC: rt5645: change gpio to gpiod APIs Move gpio to gpio_desc and use gpiod APIs in codec driver. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-10 14:27:57 +08:00
}
ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating [ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ] The codec leaves tie combo jack's sleeve/ring2 to floating status default. It would cause electric noise while connecting the active speaker jack during boot or shutdown. This patch requests a gpio to control the additional jack circuit to tie the contacts to the ground or floating. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-08 17:10:56 +08:00
rt5645->gpiod_cbj_sleeve = devm_gpiod_get_optional(&i2c->dev, "cbj-sleeve",
GPIOD_OUT_LOW);
if (IS_ERR(rt5645->gpiod_cbj_sleeve)) {
ret = PTR_ERR(rt5645->gpiod_cbj_sleeve);
dev_info(&i2c->dev, "failed to initialize gpiod, ret=%d\n", ret);
if (ret != -ENOENT)
return ret;
}
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
for (i = 0; i < ARRAY_SIZE(rt5645->supplies); i++)
rt5645->supplies[i].supply = rt5645_supply_names[i];
ret = devm_regulator_bulk_get(&i2c->dev,
ARRAY_SIZE(rt5645->supplies),
rt5645->supplies);
if (ret) {
dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
return ret;
}
ret = regulator_bulk_enable(ARRAY_SIZE(rt5645->supplies),
rt5645->supplies);
if (ret) {
dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
regmap = devm_regmap_init_i2c(i2c, &temp_regmap);
if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);
dev_err(&i2c->dev, "Failed to allocate temp register map: %d\n",
ret);
ASoC: rt5645: Fix the error handling of rt5645_i2c_probe() After enabling the regulator, The driver should disable the regulator when failing at probing. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220510153251.1741210-4-zheyuma97@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-10 23:32:48 +08:00
goto err_enable;
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
}
ASoC: rt5645: Wait for 400msec before concluding on value of RT5645_VENDOR_ID2 Minimum time required between power On of codec and read of RT5645_VENDOR_ID2 is 400msec. We should wait that long before reading the value. TEST=Cold boot the device and check for sound device. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-10 01:35:51 +08:00
/*
* Read after 400msec, as it is the interval required between
* read and power On.
*/
msleep(TIME_TO_POWER_MS);
ASoC: rt5645: check return value after reading device id If the I2C controller encounters some problems like timed-out, the codec driver will report the error code for the first read. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230705042915.24932-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-05 12:29:14 +08:00
ret = regmap_read(regmap, RT5645_VENDOR_ID2, &val);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to read: 0x%02X\n, ret = %d", RT5645_VENDOR_ID2, ret);
goto err_enable;
}
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
switch (val) {
case RT5645_DEVICE_ID:
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
rt5645->regmap = devm_regmap_init_i2c(i2c, &rt5645_regmap);
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
rt5645->codec_type = CODEC_TYPE_RT5645;
break;
case RT5650_DEVICE_ID:
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
rt5645->regmap = devm_regmap_init_i2c(i2c, &rt5650_regmap);
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
rt5645->codec_type = CODEC_TYPE_RT5650;
break;
default:
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
dev_err(&i2c->dev,
ASoC: rt5645: Prefix hexadecimal ID register value with 0x in error print Make it obvious that unexpected value read from ID register is printed in hexadecimal. Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-25 18:58:58 +08:00
"Device with ID register %#x is not rt5645 or rt5650\n",
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
val);
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
ret = -ENODEV;
goto err_enable;
ASoC: rt5645: improve headphone depop function We add a calibration function and call it at the beginning of i2c_probe. The calibration value will be kept until codec is shutdown. We will reset the codec after the calibration is finished. So, we set cache_bypass in the calibration function. The benefit is we can shorter the delay time in headphone depop. We also change the register setting in the depop sequence which will reduce the pop noise in headphone playback. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-12 20:43:02 +08:00
}
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
if (IS_ERR(rt5645->regmap)) {
ret = PTR_ERR(rt5645->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
ASoC: rt5645: Fix the error handling of rt5645_i2c_probe() After enabling the regulator, The driver should disable the regulator when failing at probing. Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220510153251.1741210-4-zheyuma97@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-10 23:32:48 +08:00
goto err_enable;
ASoC: rt5645: Separate regmap for rt5645 and rt5650 rt5645.c support both rt5645 and rt5650 codec. And the default value of registers are not identical. So we use different regmap for the two codecs. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-10 16:54:54 +08:00
}
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
regmap_write(rt5645->regmap, RT5645_RESET, 0);
ASoC: rt5645: remove unexisting route on new rt5645 "SPOL MIX DAC R1 Switch" and "SPOL MIX SPKVOL R Switch" are only exist in the early version of rt5645. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-10-30 15:26:05 +08:00
regmap_read(regmap, RT5645_VENDOR_ID, &val);
rt5645->v_id = val & 0xff;
ASoC: rt5645: reset RT5645_AD_DA_MIXER at probe RT5645_AD_DA_MIXER (0x29) register will not be reset to default after SW reset. So we have to write it to its default value in i2c_probe. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-22 13:59:19 +08:00
regmap_write(rt5645->regmap, RT5645_AD_DA_MIXER, 0x8080);
ASoC: rt5645: improve the depop sequences of CBJ detection This patch will improve the depop function of CBJ detection before the headphone playback when the system resumes. We also want to complete the CBJ detection in the system-level resume function. It could avoid triggering the detection at the playing state of headphones. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18 10:37:32 +08:00
ret = regmap_multi_reg_write(rt5645->regmap, init_list,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ARRAY_SIZE(init_list));
if (ret != 0)
dev_warn(&i2c->dev, "Failed to apply regmap patch: %d\n", ret);
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
if (rt5645->codec_type == CODEC_TYPE_RT5650) {
ASoC: rt5645: improve the depop sequences of CBJ detection This patch will improve the depop function of CBJ detection before the headphone playback when the system resumes. We also want to complete the CBJ detection in the system-level resume function. It could avoid triggering the detection at the playing state of headphones. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18 10:37:32 +08:00
ret = regmap_multi_reg_write(rt5645->regmap, rt5650_init_list,
ASoC: rt5645: Add rt5650 codec support This patch adds support for rt5650 codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-01-21 20:50:15 +08:00
ARRAY_SIZE(rt5650_init_list));
if (ret != 0)
dev_warn(&i2c->dev, "Apply rt5650 patch failed: %d\n",
ret);
}
ASoC: rt5645: enable speaker protection features This patch is uploaded for enabling the speaker protection features of the audio codec. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-27 10:05:29 +08:00
regmap_update_bits(rt5645->regmap, RT5645_CLSD_OUT_CTRL, 0xc0, 0xc0);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
if (rt5645->pdata.in2_diff)
regmap_update_bits(rt5645->regmap, RT5645_IN2_CTRL,
RT5645_IN_DF2, RT5645_IN_DF2);
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
if (rt5645->pdata.dmic1_data_pin || rt5645->pdata.dmic2_data_pin) {
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1,
RT5645_GP2_PIN_MASK, RT5645_GP2_PIN_DMIC1_SCL);
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
}
switch (rt5645->pdata.dmic1_data_pin) {
case RT5645_DMIC_DATA_IN2N:
regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1,
RT5645_DMIC_1_DP_MASK, RT5645_DMIC_1_DP_IN2N);
break;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
case RT5645_DMIC_DATA_GPIO5:
ASoC: rt5645: Fix lost pin setting for DMIC1 I2S2_DAC pin can be used for I2S or GPIO. We should set it as GPIO if we use GPIO5 as DMIC1 data pin. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-03 12:17:39 +08:00
regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1,
RT5645_I2S2_DAC_PIN_MASK, RT5645_I2S2_DAC_PIN_GPIO);
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1,
RT5645_DMIC_1_DP_MASK, RT5645_DMIC_1_DP_GPIO5);
regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1,
RT5645_GP5_PIN_MASK, RT5645_GP5_PIN_DMIC1_SDA);
break;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
case RT5645_DMIC_DATA_GPIO11:
regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1,
RT5645_DMIC_1_DP_MASK, RT5645_DMIC_1_DP_GPIO11);
regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1,
RT5645_GP11_PIN_MASK,
RT5645_GP11_PIN_DMIC1_SDA);
break;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
default:
break;
}
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
switch (rt5645->pdata.dmic2_data_pin) {
case RT5645_DMIC_DATA_IN2P:
regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1,
RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_IN2P);
break;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
case RT5645_DMIC_DATA_GPIO6:
regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1,
RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO6);
regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1,
RT5645_GP6_PIN_MASK, RT5645_GP6_PIN_DMIC2_SDA);
break;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
case RT5645_DMIC_DATA_GPIO10:
regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1,
RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO10);
regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1,
RT5645_GP10_PIN_MASK,
RT5645_GP10_PIN_DMIC2_SDA);
break;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
case RT5645_DMIC_DATA_GPIO12:
regmap_update_bits(rt5645->regmap, RT5645_DMIC_CTRL1,
RT5645_DMIC_2_DP_MASK, RT5645_DMIC_2_DP_GPIO12);
regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1,
RT5645_GP12_PIN_MASK,
RT5645_GP12_PIN_DMIC2_SDA);
break;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
default:
break;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
}
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
if (rt5645->pdata.jd_mode) {
ASoC: rt5645: Add JD function support rt5645 codec support jack detection function. The patch will set related registers if JD function is used. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 15:02:08 +08:00
regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL3,
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
RT5645_IRQ_CLK_GATE_CTRL,
RT5645_IRQ_CLK_GATE_CTRL);
ASoC: rt5645: Add JD function support rt5645 codec support jack detection function. The patch will set related registers if JD function is used. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-05 15:02:08 +08:00
regmap_update_bits(rt5645->regmap, RT5645_MICBIAS,
ASoC: rt5645: remove unused field in pdata We can know if dmic is used by reading the value of dmic1_data_pin and dmic2_data_pin. Also IRQ must be used if codec JD or button detection function is used. So, dmic_en and en_jd_func can be remove from platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-05-05 21:42:01 +08:00
RT5645_IRQ_CLK_INT, RT5645_IRQ_CLK_INT);
ASoC: rt5645: multiple JD mode support There are 3 JD modes in RT5645. This patch configure register values according to platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 16:50:18 +08:00
regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
RT5645_IRQ_JD_1_1_EN, RT5645_IRQ_JD_1_1_EN);
regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL3,
RT5645_JD_PSV_MODE, RT5645_JD_PSV_MODE);
regmap_update_bits(rt5645->regmap, RT5645_HPO_MIXER,
RT5645_IRQ_PSV_MODE, RT5645_IRQ_PSV_MODE);
regmap_update_bits(rt5645->regmap, RT5645_MICBIAS,
RT5645_MIC2_OVCD_EN, RT5645_MIC2_OVCD_EN);
regmap_update_bits(rt5645->regmap, RT5645_GPIO_CTRL1,
RT5645_GP1_PIN_IRQ, RT5645_GP1_PIN_IRQ);
switch (rt5645->pdata.jd_mode) {
case 1:
regmap_update_bits(rt5645->regmap, RT5645_A_JD_CTRL1,
RT5645_JD1_MODE_MASK,
RT5645_JD1_MODE_0);
break;
case 2:
regmap_update_bits(rt5645->regmap, RT5645_A_JD_CTRL1,
RT5645_JD1_MODE_MASK,
RT5645_JD1_MODE_1);
break;
case 3:
ASoC: rt5645: Fixed buddy jack support. The headphone jack on buddy was broken with the following commit: commit 6b5da66322c5 ("ASoC: rt5645: read jd1_1 status for jd detection"). This changes the jd_mode for buddy to 4 so buddy can read from the same register that was used in the working version of this driver without affecting any other devices that might use this, since no other device uses jd_mode = 4. To test this I plugged and uplugged the headphone jack, verifying audio works. Signed-off-by: Jacob Rasmussen <jacobraz@google.com> Reviewed-by: Ross Zwisler <zwisler@google.com> Link: https://lore.kernel.org/r/20191111185957.217244-1-jacobraz@google.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-11-12 02:59:57 +08:00
case 4:
ASoC: rt5645: multiple JD mode support There are 3 JD modes in RT5645. This patch configure register values according to platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 16:50:18 +08:00
regmap_update_bits(rt5645->regmap, RT5645_A_JD_CTRL1,
RT5645_JD1_MODE_MASK,
RT5645_JD1_MODE_2);
break;
default:
break;
}
ASoC: rt5645: add inv_jd1_1 flag The flag will invert jd1_1 status. Which will be used if the jack connector is normal closed. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:38 +08:00
if (rt5645->pdata.inv_jd1_1) {
regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV);
}
ASoC: rt5645: multiple JD mode support There are 3 JD modes in RT5645. This patch configure register values according to platform data. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-11-18 16:50:18 +08:00
}
ASoC: rt5645: set sel_i2s_pre_div1 to 2 The i2s clock pre-divider 1 is used for both i2s1 and sysclk. The i2s1 is usually used for the main i2s and the pre-divider will be set in hw_params function. However, if i2s2 is used, the pre-divider is not set in the hw_params function and the default value of i2s clock pre-divider 1 is too high for sysclk and DMIC usage. Fix by overriding default divider value to 2. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681 Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-12-27 12:05:05 +08:00
regmap_update_bits(rt5645->regmap, RT5645_ADDA_CLK1,
RT5645_I2S_PD1_MASK, RT5645_I2S_PD1_2);
ASoC: rt5645: rename jd_invert flag in platform data The jd_invert flag is actually used for level triggered IRQ. Rename it to let code more readable. Signed-off-by: Bard Liao <bardliao@realtek.com> Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-06-28 20:49:37 +08:00
if (rt5645->pdata.level_trigger_irq) {
ASoC: rt5645: use polling to support HS button The IRQ pin will keep high when the headset button is pressed. And keep low when the headset button is released. So, we need irq trigger at both edges. However, some platform can't support it. Therefore, we polling the register to report the button release event once a button presse event is received. To support the headset button detection function for those can't support both edges trigger platforms, we also need to invert the polarity of jack detection irq since we need to keep the IRQ pin low in normal case. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:20 +08:00
regmap_update_bits(rt5645->regmap, RT5645_IRQ_CTRL2,
RT5645_JD_1_1_MASK, RT5645_JD_1_1_INV);
}
ALSA: Convert timers to use timer_setup() In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. These are all the "mechanical" changes remaining in the sound subsystem. Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: Mark Brown <broonie@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-25 23:09:27 +08:00
timer_setup(&rt5645->btn_check_timer, rt5645_btn_check_callback, 0);
ASoC: rt5645: use polling to support HS button The IRQ pin will keep high when the headset button is pressed. And keep low when the headset button is released. So, we need irq trigger at both edges. However, some platform can't support it. Therefore, we polling the register to report the button release event once a button presse event is received. To support the headset button detection function for those can't support both edges trigger platforms, we also need to invert the polarity of jack detection irq since we need to keep the IRQ pin low in normal case. Signed-off-by: John Lin <john.lin@realtek.com> Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-12-30 15:33:20 +08:00
ASoC: rt5650: add mutex to avoid the jack detection failure [ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ] This patch adds the jd_mutex to protect the jack detection control flow. And only the headset type could check the button status. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-22 18:01:23 +08:00
mutex_init(&rt5645->jd_mutex);
ASoC: rt5645: Init jack_detect_work before registering irq Prevents frequent panic on boot, if the irq handler rt5645_irq gets called before the workqueue rt5645_jack_detect_work is initialized. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-05 18:42:12 +08:00
INIT_DELAYED_WORK(&rt5645->jack_detect_work, rt5645_jack_detect_work);
ASoC: rt5645: Power up the RC clock to make sure the speaker volume adjust properly Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-05 19:55:51 +08:00
INIT_DELAYED_WORK(&rt5645->rcclock_work, rt5645_rcclock_work);
ASoC: rt5645: Init jack_detect_work before registering irq Prevents frequent panic on boot, if the irq handler rt5645_irq gets called before the workqueue rt5645_jack_detect_work is initialized. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2015-06-05 18:42:12 +08:00
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
if (rt5645->i2c->irq) {
ret = request_threaded_irq(rt5645->i2c->irq, NULL, rt5645_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING
| IRQF_ONESHOT, "rt5645", rt5645);
ASoC: rt5645: Fix missing free_irq The driver does not free irq when snd_soc_register_codec returns error. It does not return error when request irq failed, either. Add return when request irq failed, and free_irq if snd_soc_register_codec failed. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:11 +08:00
if (ret) {
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
dev_err(&i2c->dev, "Failed to reguest IRQ: %d\n", ret);
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
goto err_enable;
ASoC: rt5645: Fix missing free_irq The driver does not free irq when snd_soc_register_codec returns error. It does not return error when request irq failed, either. Add return when request irq failed, and free_irq if snd_soc_register_codec failed. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:11 +08:00
}
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
}
ASoC: rt5645/rt5677: replace codec to component Now we can replace Codec to Component. Let's do it. Because Intel/Mediatek platforms are using rt5645/rt5677, we need to update these all related drivers in same time. Otherwise compile error/warning happen rt5645: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 rt5677: xxx_codec_xxx() -> xxx_component_xxx() .idle_bias_off = 1 -> .idle_bias_on = 0 .ignore_pmdown_time = 0 -> .use_pmdown_time = 1 - -> .endianness = 1 - -> .non_legacy_dai_naming = 1 Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-29 11:49:31 +08:00
ret = devm_snd_soc_register_component(&i2c->dev, &soc_component_dev_rt5645,
ASoC: rt5645: Fix missing free_irq The driver does not free irq when snd_soc_register_codec returns error. It does not return error when request irq failed, either. Add return when request irq failed, and free_irq if snd_soc_register_codec failed. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:11 +08:00
rt5645_dai, ARRAY_SIZE(rt5645_dai));
if (ret)
goto err_irq;
return 0;
err_irq:
if (rt5645->i2c->irq)
free_irq(rt5645->i2c->irq, rt5645);
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
err_enable:
regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies);
ASoC: rt5645: Fix missing free_irq The driver does not free irq when snd_soc_register_codec returns error. It does not return error when request irq failed, either. Add return when request irq failed, and free_irq if snd_soc_register_codec failed. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:11 +08:00
return ret;
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 16:02:30 +08:00
static void rt5645_i2c_remove(struct i2c_client *i2c)
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
{
ASoC: rt5645: Add headset detect function Add headset detect function Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-09-19 19:15:45 +08:00
struct rt5645_priv *rt5645 = i2c_get_clientdata(i2c);
if (i2c->irq)
free_irq(i2c->irq, rt5645);
ASoC: rt5645: Fix errorenous cleanup order There is a logic error when removing rt5645 device as the function rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and delete the &rt5645->btn_check_timer latter. However, since the timer handler rt5645_btn_check_callback() will re-queue the jack_detect_work, this cleanup order is buggy. That is, once the del_timer_sync in rt5645_i2c_remove is concurrently run with the rt5645_btn_check_callback, the canceled jack_detect_work will be rescheduled again, leading to possible use-after-free. This patch fix the issue by placing the del_timer_sync function before the cancel_delayed_work_sync. Signed-off-by: Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20220516092035.28283-1-linma@zju.edu.cn Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-16 17:20:35 +08:00
/*
* Since the rt5645_btn_check_callback() can queue jack_detect_work,
* the timer need to be delted first
*/
del_timer_sync(&rt5645->btn_check_timer);
ASoC: rt5645: Add the workqueue of the jack detect function for the debouncing Add the workqueue of the jack detect function for the debouncing. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-07 10:25:37 +08:00
cancel_delayed_work_sync(&rt5645->jack_detect_work);
ASoC: rt5645: Power up the RC clock to make sure the speaker volume adjust properly Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-05 19:55:51 +08:00
cancel_delayed_work_sync(&rt5645->rcclock_work);
ASoC: rt5645: Add the workqueue of the jack detect function for the debouncing Add the workqueue of the jack detect function for the debouncing. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-10-07 10:25:37 +08:00
ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating [ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ] The codec leaves tie combo jack's sleeve/ring2 to floating status default. It would cause electric noise while connecting the active speaker jack during boot or shutdown. This patch requests a gpio to control the additional jack circuit to tie the contacts to the ground or floating. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-08 17:10:56 +08:00
if (rt5645->gpiod_cbj_sleeve)
gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
ASoC: rt5645: Add regulator support This adds basic regulator support for rt5645. Signed-off-by: Koro Chen <koro.chen@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-07-17 11:33:12 +08:00
regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies);
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
}
ASoC: rt5645: Prevent the pop sound of the headphone while rebooting or shutdowning Add i2c shutdown function to prevent the pop sound of the headphone while the system is rebooting or shutdowning. It de-initials the jack detection function, and it cannot be turned off in _BIAS_OFF. If we don't de-initial it, the pop sound will be heard in the situation of powering off. And replace the related register settings from magic number to meaningful defined name. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 15:14:51 +08:00
static void rt5645_i2c_shutdown(struct i2c_client *i2c)
{
struct rt5645_priv *rt5645 = i2c_get_clientdata(i2c);
regmap_update_bits(rt5645->regmap, RT5645_GEN_CTRL3,
RT5645_RING2_SLEEVE_GND, RT5645_RING2_SLEEVE_GND);
regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL2, RT5645_CBJ_MN_JD,
RT5645_CBJ_MN_JD);
regmap_update_bits(rt5645->regmap, RT5645_IN1_CTRL1, RT5645_CBJ_BST1_EN,
0);
ASoC: rt5645: Prevent the weird sound of the headphone while rebooting The patch adds the codec reset setting in the shutdown function to prevent the weird sound of the headphone happened by rebooting. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-05 19:34:16 +08:00
msleep(20);
regmap_write(rt5645->regmap, RT5645_RESET, 0);
ASoC: rt5645: Fix the electric noise due to the CBJ contacts floating [ Upstream commit 103abab975087e1f01b76fcb54c91dbb65dbc249 ] The codec leaves tie combo jack's sleeve/ring2 to floating status default. It would cause electric noise while connecting the active speaker jack during boot or shutdown. This patch requests a gpio to control the additional jack circuit to tie the contacts to the ground or floating. Signed-off-by: Derek Fang <derek.fang@realtek.com> Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-04-08 17:10:56 +08:00
if (rt5645->gpiod_cbj_sleeve)
gpiod_set_value(rt5645->gpiod_cbj_sleeve, 0);
ASoC: rt5645: Prevent the pop sound of the headphone while rebooting or shutdowning Add i2c shutdown function to prevent the pop sound of the headphone while the system is rebooting or shutdowning. It de-initials the jack detection function, and it cannot be turned off in _BIAS_OFF. If we don't de-initial it, the pop sound will be heard in the situation of powering off. And replace the related register settings from magic number to meaningful defined name. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 15:14:51 +08:00
}
ASoC: rt5645: add the system level suspend-resume callback This patch handles the regmap settings and re-detects the jack when the system level suspend/resume. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230705042931.24950-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-05 12:29:31 +08:00
static int __maybe_unused rt5645_sys_suspend(struct device *dev)
{
struct rt5645_priv *rt5645 = dev_get_drvdata(dev);
del_timer_sync(&rt5645->btn_check_timer);
cancel_delayed_work_sync(&rt5645->jack_detect_work);
cancel_delayed_work_sync(&rt5645->rcclock_work);
regcache_cache_only(rt5645->regmap, true);
regcache_mark_dirty(rt5645->regmap);
return 0;
}
static int __maybe_unused rt5645_sys_resume(struct device *dev)
{
struct rt5645_priv *rt5645 = dev_get_drvdata(dev);
regcache_cache_only(rt5645->regmap, false);
regcache_sync(rt5645->regmap);
if (rt5645->hp_jack) {
rt5645->jack_type = 0;
ASoC: rt5645: improve the depop sequences of CBJ detection This patch will improve the depop function of CBJ detection before the headphone playback when the system resumes. We also want to complete the CBJ detection in the system-level resume function. It could avoid triggering the detection at the playing state of headphones. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230818023732.2153170-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-08-18 10:37:32 +08:00
rt5645_jack_detect_work(&rt5645->jack_detect_work.work);
ASoC: rt5645: add the system level suspend-resume callback This patch handles the regmap settings and re-detects the jack when the system level suspend/resume. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230705042931.24950-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-05 12:29:31 +08:00
}
return 0;
}
static const struct dev_pm_ops rt5645_pm = {
SET_SYSTEM_SLEEP_PM_OPS(rt5645_sys_suspend, rt5645_sys_resume)
};
ASoC: rt5645: Staticise non-exported symbols The patch is for staticising non-exported symbols Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08 14:47:35 +08:00
static struct i2c_driver rt5645_i2c_driver = {
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
.driver = {
.name = "rt5645",
ASoc: rt5645: Add OF device ID table The driver doesn't have a struct of_device_id table but supported devices are registered via Device Trees. This is working on the assumption that a I2C device registered via OF will always match a legacy I2C device ID and that the MODALIAS reported will always be of the form i2c:<device>. But this could change in the future so the correct approach is to have an OF device ID table if the devices are registered via OF. Before this patch: $ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias alias: acpi*:10EC3270:* alias: acpi*:10EC5640:* alias: acpi*:10EC5650:* alias: acpi*:10EC5648:* alias: acpi*:10EC5645:* alias: i2c:rt5650 alias: i2c:rt5645 After this patch: $ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias alias: of:N*T*Crealtek,rt5650C* alias: of:N*T*Crealtek,rt5650 alias: of:N*T*Crealtek,rt5645C* alias: of:N*T*Crealtek,rt5645 alias: acpi*:10EC3270:* alias: acpi*:10EC5640:* alias: acpi*:10EC5650:* alias: acpi*:10EC5648:* alias: acpi*:10EC5645:* alias: i2c:rt5650 alias: i2c:rt5645 Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 03:26:25 +08:00
.of_match_table = of_match_ptr(rt5645_of_match),
ASoC: rt5645: Add ACPI match ID This patch adds the ACPI match ID for rt5645/5650 codec Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-04-24 07:35:17 +08:00
.acpi_match_table = ACPI_PTR(rt5645_acpi_match),
ASoC: rt5645: add the system level suspend-resume callback This patch handles the regmap settings and re-detects the jack when the system level suspend/resume. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20230705042931.24950-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-05 12:29:31 +08:00
.pm = &rt5645_pm,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
},
ASoC: Switch i2c drivers back to use .probe() After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de Link: https://lore.kernel.org/r/20230425095716.331419-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org
2023-04-25 17:57:16 +08:00
.probe = rt5645_i2c_probe,
ASoC: rt5645: Prevent the pop sound of the headphone while rebooting or shutdowning Add i2c shutdown function to prevent the pop sound of the headphone while the system is rebooting or shutdowning. It de-initials the jack detection function, and it cannot be turned off in _BIAS_OFF. If we don't de-initial it, the pop sound will be heard in the situation of powering off. And replace the related register settings from magic number to meaningful defined name. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-08-27 15:14:51 +08:00
.remove = rt5645_i2c_remove,
.shutdown = rt5645_i2c_shutdown,
ASoC: rt5645: Add codec driver This patch adds the Realtek ALC5645 codec driver. It is the base version that because the jack detect function is not implemented to it, the headphone and AMIC1 are not workable. We will fill up the further functions later. Signed-off-by: Bard Liao <bardliao@realtek.com> Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-04-28 19:59:10 +08:00
.id_table = rt5645_i2c_id,
};
module_i2c_driver(rt5645_i2c_driver);
MODULE_DESCRIPTION("ASoC RT5645 driver");
MODULE_AUTHOR("Bard Liao <bardliao@realtek.com>");
MODULE_LICENSE("GPL v2");