OpenCloudOS-Kernel/sound/soc/samsung/h1940_uda1380.c

249 lines
5.6 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0+
//
// h1940_uda1380.c - ALSA SoC Audio Layer
//
// Copyright (c) 2010 Arnaud Patard <arnaud.patard@rtp-net.org>
// Copyright (c) 2010 Vasily Khoruzhick <anarsoul@gmail.com>
//
// Based on version from Arnaud Patard <arnaud.patard@rtp-net.org>
ASoC: h1940: Fix compilation error due to missing header Add linux/types.h to fix this compilation error: In file included from arch/arm/mach-s3c2410/include/mach/gpio-fns.h:27:0, from arch/arm/mach-s3c2410/include/mach/gpio.h:27, from /home/anarsoul/work/pda-linux/linux-next/arch/arm/include/asm/gpio.h:5, from include/linux/gpio.h:18, from sound/soc/samsung/rx1950_uda1380.c:20: arch/arm/plat-samsung/include/plat/gpio-cfg.h:29:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:30:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_drvstr_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:57:2: error: expected specifier-qualifier-list before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:148:47: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:156:24: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s3c_gpio_getpull’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:175:24: error: expected declaration specifiers or ‘...’ before ‘s3c_gpio_pull_t’ arch/arm/plat-samsung/include/plat/gpio-cfg.h: In function ‘s3c_gpio_cfgrange_nopull’: arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: ‘s3c_gpio_pull_t’ undeclared (first use in this function) arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: note: each undeclared identifier is reported only once for each function it appears in arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: expected ‘)’ before numeric constant arch/arm/plat-samsung/include/plat/gpio-cfg.h:180:47: error: too many arguments to function ‘s3c_gpio_cfgall_range’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:174:12: note: declared here arch/arm/plat-samsung/include/plat/gpio-cfg.h: At top level: arch/arm/plat-samsung/include/plat/gpio-cfg.h:199:26: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘s5p_gpio_get_drvstr’ arch/arm/plat-samsung/include/plat/gpio-cfg.h:210:50: error: expected declaration specifiers or ‘...’ before ‘s5p_gpio_drvstr_t’ Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Acked-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-12 22:52:59 +08:00
#include <linux/types.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <sound/soc.h>
#include <sound/jack.h>
#include "regs-iis.h"
#include <asm/mach-types.h>
ASoC: samsung: Fix build regressions due to gpio re-org Recent changes through commits c67d0f29262b ("ARM: s3c24xx: get rid of custom <mach/gpio.h>"), b0161caa72b6 ("ARM: S3C[24|64]xx: move includes back under <mach/> scope"), 364374121b78 ("ARM: s3c24xx: explicit dependency on <plat/gpio-cfg.h>") and 41c3548e6da6 ("ARM: s3c64xx: get rid of custom <mach/gpio.h>") caused build regressions due to broken dependencies. Fix the following errors by including the necessary header files explicitly: sound/soc/samsung/h1940_uda1380.c:56:3: error: implicit declaration of function ‘S3C2410_GPG’ sound/soc/samsung/h1940_uda1380.c:149:18: error: ‘S3C_GPIO_END’ undeclared (first use in this function) sound/soc/samsung/h1940_uda1380.c:234:21: error: ‘S3C_GPIO_END’ undeclared (first use in this function) sound/soc/samsung/h1940_uda1380.c:270:12: error: ‘S3C_GPIO_END’ undeclared (first use in this function) sound/soc/samsung/neo1973_wm8753.c:239:2: error: implicit declaration of function ‘S3C2410_GPJ’ sound/soc/samsung/rx1950_uda1380.c:67:3: error: implicit declaration of function ‘S3C2410_GPG’ sound/soc/samsung/s3c2412-i2s.c:86:2: error: implicit declaration of function ‘s3c_gpio_cfgall_range’ sound/soc/samsung/s3c2412-i2s.c:86:2: error: implicit declaration of function ‘S3C2410_GPE’ sound/soc/samsung/s3c2412-i2s.c:86:2: error: implicit declaration of function ‘S3C_GPIO_SFN’ sound/soc/samsung/s3c2412-i2s.c:87:10: error: ‘S3C_GPIO_PULL_NONE’ undeclared sound/soc/samsung/s3c24xx-i2s.c:394:2: error: implicit declaration of function ‘s3c_gpio_cfgall_range’ sound/soc/samsung/s3c24xx-i2s.c:394:2: error: implicit declaration of function ‘S3C2410_GPE’ sound/soc/samsung/s3c24xx-i2s.c:394:2: error: implicit declaration of function ‘S3C_GPIO_SFN’ sound/soc/samsung/s3c24xx-i2s.c:395:10: error: ‘S3C_GPIO_PULL_NONE’ undeclared sound/soc/samsung/smartq_wm8987.c:112:3: error: implicit declaration of function ‘S3C64XX_GPL’ Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-01-22 20:00:38 +08:00
#include <mach/gpio-samsung.h>
#include "s3c24xx-i2s.h"
static const unsigned int rates[] = {
11025,
22050,
44100,
};
static const struct snd_pcm_hw_constraint_list hw_rates = {
.count = ARRAY_SIZE(rates),
.list = rates,
};
static struct snd_soc_jack hp_jack;
static struct snd_soc_jack_pin hp_jack_pins[] = {
{
.pin = "Headphone Jack",
.mask = SND_JACK_HEADPHONE,
},
{
.pin = "Speaker",
.mask = SND_JACK_HEADPHONE,
.invert = 1,
},
};
static struct snd_soc_jack_gpio hp_jack_gpios[] = {
{
.gpio = S3C2410_GPG(4),
.name = "hp-gpio",
.report = SND_JACK_HEADPHONE,
.invert = 1,
.debounce_time = 200,
},
};
static int h1940_startup(struct snd_pcm_substream *substream)
{
struct snd_pcm_runtime *runtime = substream->runtime;
return snd_pcm_hw_constraint_list(runtime, 0,
SNDRV_PCM_HW_PARAM_RATE,
&hw_rates);
}
static int h1940_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
int div;
int ret;
unsigned int rate = params_rate(params);
switch (rate) {
case 11025:
case 22050:
case 44100:
div = s3c24xx_i2s_get_clockrate() / (384 * rate);
if (s3c24xx_i2s_get_clockrate() % (384 * rate) > (192 * rate))
div++;
break;
default:
dev_err(rtd->dev, "%s: rate %d is not supported\n",
__func__, rate);
return -EINVAL;
}
/* select clock source */
ret = snd_soc_dai_set_sysclk(cpu_dai, S3C24XX_CLKSRC_PCLK, rate,
SND_SOC_CLOCK_OUT);
if (ret < 0)
return ret;
/* set MCLK division for sample rate */
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
S3C2410_IISMOD_384FS);
if (ret < 0)
return ret;
/* set BCLK division for sample rate */
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
S3C2410_IISMOD_32FS);
if (ret < 0)
return ret;
/* set prescaler division for sample rate */
ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
S3C24XX_PRESCALE(div, div));
if (ret < 0)
return ret;
return 0;
}
static struct snd_soc_ops h1940_ops = {
.startup = h1940_startup,
.hw_params = h1940_hw_params,
};
static int h1940_spk_power(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
if (SND_SOC_DAPM_EVENT_ON(event))
gpio_set_value(S3C_GPIO_END + 9, 1);
else
gpio_set_value(S3C_GPIO_END + 9, 0);
return 0;
}
/* h1940 machine dapm widgets */
static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = {
SND_SOC_DAPM_HP("Headphone Jack", NULL),
SND_SOC_DAPM_MIC("Mic Jack", NULL),
SND_SOC_DAPM_SPK("Speaker", h1940_spk_power),
};
/* h1940 machine audio_map */
static const struct snd_soc_dapm_route audio_map[] = {
/* headphone connected to VOUTLHP, VOUTRHP */
{"Headphone Jack", NULL, "VOUTLHP"},
{"Headphone Jack", NULL, "VOUTRHP"},
/* ext speaker connected to VOUTL, VOUTR */
{"Speaker", NULL, "VOUTL"},
{"Speaker", NULL, "VOUTR"},
/* mic is connected to VINM */
{"VINM", NULL, "Mic Jack"},
};
static struct platform_device *s3c24xx_snd_device;
static int h1940_uda1380_init(struct snd_soc_pcm_runtime *rtd)
{
snd_soc_card_jack_new(rtd->card, "Headphone Jack", SND_JACK_HEADPHONE,
&hp_jack, hp_jack_pins, ARRAY_SIZE(hp_jack_pins));
snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
hp_jack_gpios);
return 0;
}
/* s3c24xx digital audio interface glue - connects codec <--> CPU */
SND_SOC_DAILINK_DEFS(uda1380,
DAILINK_COMP_ARRAY(COMP_CPU("s3c24xx-iis")),
DAILINK_COMP_ARRAY(COMP_CODEC("uda1380-codec.0-001a", "uda1380-hifi")),
DAILINK_COMP_ARRAY(COMP_PLATFORM("s3c24xx-iis")));
static struct snd_soc_dai_link h1940_uda1380_dai[] = {
{
.name = "uda1380",
.stream_name = "UDA1380 Duplex",
.init = h1940_uda1380_init,
.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
SND_SOC_DAIFMT_CBS_CFS,
.ops = &h1940_ops,
SND_SOC_DAILINK_REG(uda1380),
},
};
static struct snd_soc_card h1940_asoc = {
.name = "h1940",
.owner = THIS_MODULE,
.dai_link = h1940_uda1380_dai,
.num_links = ARRAY_SIZE(h1940_uda1380_dai),
.dapm_widgets = uda1380_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(uda1380_dapm_widgets),
.dapm_routes = audio_map,
.num_dapm_routes = ARRAY_SIZE(audio_map),
};
static int __init h1940_init(void)
{
int ret;
if (!machine_is_h1940())
return -ENODEV;
/* configure some gpios */
ret = gpio_request(S3C_GPIO_END + 9, "speaker-power");
if (ret)
goto err_out;
ret = gpio_direction_output(S3C_GPIO_END + 9, 0);
if (ret)
goto err_gpio;
s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
if (!s3c24xx_snd_device) {
ret = -ENOMEM;
goto err_gpio;
}
platform_set_drvdata(s3c24xx_snd_device, &h1940_asoc);
ret = platform_device_add(s3c24xx_snd_device);
if (ret)
goto err_plat;
return 0;
err_plat:
platform_device_put(s3c24xx_snd_device);
err_gpio:
gpio_free(S3C_GPIO_END + 9);
err_out:
return ret;
}
static void __exit h1940_exit(void)
{
platform_device_unregister(s3c24xx_snd_device);
gpio_free(S3C_GPIO_END + 9);
}
module_init(h1940_init);
module_exit(h1940_exit);
/* Module information */
MODULE_AUTHOR("Arnaud Patard, Vasily Khoruzhick");
MODULE_DESCRIPTION("ALSA SoC H1940");
MODULE_LICENSE("GPL");