OpenCloudOS-Kernel/drivers/video/videomode.c

45 lines
1.1 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-only
video: add display_timing and videomode Add display_timing structure and the according helper functions. This allows the description of a display via its supported timing parameters. Also, add helper functions to convert from display timings to a generic videomode structure. The struct display_timing specifies all needed parameters to describe the signal properties of a display in one mode. This includes - ranges for signals that may have min-, max- and typical values - single integers for signals that can be on, off or are ignored - booleans for signals that are either on or off As a display may support multiple modes like this, a struct display_timings is added, that holds all given struct display_timing pointers and declares the native mode of the display. Although a display may state that a signal can be in a range, it is driven with fixed values that indicate a videomode. Therefore graphic drivers don't need all the information of struct display_timing, but would generate a videomode from the given set of supported signal timings and work with that. The video subsystems all define their own structs that describe a mode and work with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those various structures and allow code reuse across those subsystems, add struct videomode as a generic description. This patch only includes the most basic fields in struct videomode. All missing fields that are needed to have a really generic video mode description can be added at a later stage. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Afzal Mohammed <Afzal@ti.com> Tested-by: Rob Clark <robclark@gmail.com> Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>
2012-12-17 21:20:17 +08:00
/*
* generic display timing functions
*
* Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
*/
#include <linux/errno.h>
#include <linux/export.h>
#include <video/display_timing.h>
#include <video/videomode.h>
void videomode_from_timing(const struct display_timing *dt,
struct videomode *vm)
video: add display_timing and videomode Add display_timing structure and the according helper functions. This allows the description of a display via its supported timing parameters. Also, add helper functions to convert from display timings to a generic videomode structure. The struct display_timing specifies all needed parameters to describe the signal properties of a display in one mode. This includes - ranges for signals that may have min-, max- and typical values - single integers for signals that can be on, off or are ignored - booleans for signals that are either on or off As a display may support multiple modes like this, a struct display_timings is added, that holds all given struct display_timing pointers and declares the native mode of the display. Although a display may state that a signal can be in a range, it is driven with fixed values that indicate a videomode. Therefore graphic drivers don't need all the information of struct display_timing, but would generate a videomode from the given set of supported signal timings and work with that. The video subsystems all define their own structs that describe a mode and work with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those various structures and allow code reuse across those subsystems, add struct videomode as a generic description. This patch only includes the most basic fields in struct videomode. All missing fields that are needed to have a really generic video mode description can be added at a later stage. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Afzal Mohammed <Afzal@ti.com> Tested-by: Rob Clark <robclark@gmail.com> Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>
2012-12-17 21:20:17 +08:00
{
vm->pixelclock = dt->pixelclock.typ;
vm->hactive = dt->hactive.typ;
vm->hfront_porch = dt->hfront_porch.typ;
vm->hback_porch = dt->hback_porch.typ;
vm->hsync_len = dt->hsync_len.typ;
video: add display_timing and videomode Add display_timing structure and the according helper functions. This allows the description of a display via its supported timing parameters. Also, add helper functions to convert from display timings to a generic videomode structure. The struct display_timing specifies all needed parameters to describe the signal properties of a display in one mode. This includes - ranges for signals that may have min-, max- and typical values - single integers for signals that can be on, off or are ignored - booleans for signals that are either on or off As a display may support multiple modes like this, a struct display_timings is added, that holds all given struct display_timing pointers and declares the native mode of the display. Although a display may state that a signal can be in a range, it is driven with fixed values that indicate a videomode. Therefore graphic drivers don't need all the information of struct display_timing, but would generate a videomode from the given set of supported signal timings and work with that. The video subsystems all define their own structs that describe a mode and work with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those various structures and allow code reuse across those subsystems, add struct videomode as a generic description. This patch only includes the most basic fields in struct videomode. All missing fields that are needed to have a really generic video mode description can be added at a later stage. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Afzal Mohammed <Afzal@ti.com> Tested-by: Rob Clark <robclark@gmail.com> Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>
2012-12-17 21:20:17 +08:00
vm->vactive = dt->vactive.typ;
vm->vfront_porch = dt->vfront_porch.typ;
vm->vback_porch = dt->vback_porch.typ;
vm->vsync_len = dt->vsync_len.typ;
video: add display_timing and videomode Add display_timing structure and the according helper functions. This allows the description of a display via its supported timing parameters. Also, add helper functions to convert from display timings to a generic videomode structure. The struct display_timing specifies all needed parameters to describe the signal properties of a display in one mode. This includes - ranges for signals that may have min-, max- and typical values - single integers for signals that can be on, off or are ignored - booleans for signals that are either on or off As a display may support multiple modes like this, a struct display_timings is added, that holds all given struct display_timing pointers and declares the native mode of the display. Although a display may state that a signal can be in a range, it is driven with fixed values that indicate a videomode. Therefore graphic drivers don't need all the information of struct display_timing, but would generate a videomode from the given set of supported signal timings and work with that. The video subsystems all define their own structs that describe a mode and work with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those various structures and allow code reuse across those subsystems, add struct videomode as a generic description. This patch only includes the most basic fields in struct videomode. All missing fields that are needed to have a really generic video mode description can be added at a later stage. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Afzal Mohammed <Afzal@ti.com> Tested-by: Rob Clark <robclark@gmail.com> Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>
2012-12-17 21:20:17 +08:00
vm->flags = dt->flags;
}
EXPORT_SYMBOL_GPL(videomode_from_timing);
int videomode_from_timings(const struct display_timings *disp,
struct videomode *vm, unsigned int index)
{
struct display_timing *dt;
dt = display_timings_get(disp, index);
if (!dt)
return -EINVAL;
videomode_from_timing(dt, vm);
video: add display_timing and videomode Add display_timing structure and the according helper functions. This allows the description of a display via its supported timing parameters. Also, add helper functions to convert from display timings to a generic videomode structure. The struct display_timing specifies all needed parameters to describe the signal properties of a display in one mode. This includes - ranges for signals that may have min-, max- and typical values - single integers for signals that can be on, off or are ignored - booleans for signals that are either on or off As a display may support multiple modes like this, a struct display_timings is added, that holds all given struct display_timing pointers and declares the native mode of the display. Although a display may state that a signal can be in a range, it is driven with fixed values that indicate a videomode. Therefore graphic drivers don't need all the information of struct display_timing, but would generate a videomode from the given set of supported signal timings and work with that. The video subsystems all define their own structs that describe a mode and work with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those various structures and allow code reuse across those subsystems, add struct videomode as a generic description. This patch only includes the most basic fields in struct videomode. All missing fields that are needed to have a really generic video mode description can be added at a later stage. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Thierry Reding <thierry.reding@avionic-design.de> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Afzal Mohammed <Afzal@ti.com> Tested-by: Rob Clark <robclark@gmail.com> Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>
2012-12-17 21:20:17 +08:00
return 0;
}
EXPORT_SYMBOL_GPL(videomode_from_timings);