2005-04-17 06:20:36 +08:00
|
|
|
/*
|
|
|
|
* controlfb.c -- frame buffer device for the PowerMac 'control' display
|
|
|
|
*
|
|
|
|
* Created 12 July 1998 by Dan Jacobowitz <dan@debian.org>
|
|
|
|
* Copyright (C) 1998 Dan Jacobowitz
|
|
|
|
* Copyright (C) 2001 Takashi Oe
|
|
|
|
*
|
|
|
|
* Mmap code by Michel Lanners <mlan@cpu.lu>
|
|
|
|
*
|
|
|
|
* Frame buffer structure from:
|
|
|
|
* drivers/video/chipsfb.c -- frame buffer device for
|
|
|
|
* Chips & Technologies 65550 chip.
|
|
|
|
*
|
|
|
|
* Copyright (C) 1998 Paul Mackerras
|
|
|
|
*
|
|
|
|
* This file is derived from the Powermac "chips" driver:
|
|
|
|
* Copyright (C) 1997 Fabio Riccardi.
|
|
|
|
* And from the frame buffer device for Open Firmware-initialized devices:
|
|
|
|
* Copyright (C) 1997 Geert Uytterhoeven.
|
|
|
|
*
|
|
|
|
* Hardware information from:
|
|
|
|
* control.c: Console support for PowerMac "control" display adaptor.
|
|
|
|
* Copyright (C) 1996 Paul Mackerras
|
|
|
|
*
|
|
|
|
* Updated to 2.5 framebuffer API by Ben Herrenschmidt
|
|
|
|
* <benh@kernel.crashing.org>, Paul Mackerras <paulus@samba.org>,
|
|
|
|
* and James Simmons <jsimmons@infradead.org>.
|
|
|
|
*
|
|
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
|
|
* License. See the file COPYING in the main directory of this archive for
|
|
|
|
* more details.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/errno.h>
|
|
|
|
#include <linux/string.h>
|
|
|
|
#include <linux/mm.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/vmalloc.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/interrupt.h>
|
2010-07-30 01:49:01 +08:00
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_address.h>
|
2005-04-17 06:20:36 +08:00
|
|
|
#include <linux/fb.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/nvram.h>
|
|
|
|
#include <linux/adb.h>
|
|
|
|
#include <linux/cuda.h>
|
|
|
|
#include <asm/prom.h>
|
|
|
|
#include <asm/btext.h>
|
|
|
|
|
|
|
|
#include "macmodes.h"
|
|
|
|
#include "controlfb.h"
|
|
|
|
|
|
|
|
struct fb_par_control {
|
|
|
|
int vmode, cmode;
|
|
|
|
int xres, yres;
|
|
|
|
int vxres, vyres;
|
|
|
|
int xoffset, yoffset;
|
|
|
|
int pitch;
|
|
|
|
struct control_regvals regvals;
|
|
|
|
unsigned long sync;
|
|
|
|
unsigned char ctrl;
|
|
|
|
};
|
|
|
|
|
|
|
|
#define DIRTY(z) ((x)->z != (y)->z)
|
|
|
|
#define DIRTY_CMAP(z) (memcmp(&((x)->z), &((y)->z), sizeof((y)->z)))
|
|
|
|
static inline int PAR_EQUAL(struct fb_par_control *x, struct fb_par_control *y)
|
|
|
|
{
|
|
|
|
int i, results;
|
|
|
|
|
|
|
|
results = 1;
|
|
|
|
for (i = 0; i < 3; i++)
|
|
|
|
results &= !DIRTY(regvals.clock_params[i]);
|
|
|
|
if (!results)
|
|
|
|
return 0;
|
|
|
|
for (i = 0; i < 16; i++)
|
|
|
|
results &= !DIRTY(regvals.regs[i]);
|
|
|
|
if (!results)
|
|
|
|
return 0;
|
|
|
|
return (!DIRTY(cmode) && !DIRTY(xres) && !DIRTY(yres)
|
|
|
|
&& !DIRTY(vxres) && !DIRTY(vyres));
|
|
|
|
}
|
|
|
|
static inline int VAR_MATCH(struct fb_var_screeninfo *x, struct fb_var_screeninfo *y)
|
|
|
|
{
|
|
|
|
return (!DIRTY(bits_per_pixel) && !DIRTY(xres)
|
|
|
|
&& !DIRTY(yres) && !DIRTY(xres_virtual)
|
|
|
|
&& !DIRTY(yres_virtual)
|
|
|
|
&& !DIRTY_CMAP(red) && !DIRTY_CMAP(green) && !DIRTY_CMAP(blue));
|
|
|
|
}
|
|
|
|
|
|
|
|
struct fb_info_control {
|
|
|
|
struct fb_info info;
|
|
|
|
struct fb_par_control par;
|
2007-07-17 19:05:35 +08:00
|
|
|
u32 pseudo_palette[16];
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
struct cmap_regs __iomem *cmap_regs;
|
|
|
|
unsigned long cmap_regs_phys;
|
|
|
|
|
|
|
|
struct control_regs __iomem *control_regs;
|
|
|
|
unsigned long control_regs_phys;
|
|
|
|
unsigned long control_regs_size;
|
|
|
|
|
|
|
|
__u8 __iomem *frame_buffer;
|
|
|
|
unsigned long frame_buffer_phys;
|
|
|
|
unsigned long fb_orig_base;
|
|
|
|
unsigned long fb_orig_size;
|
|
|
|
|
|
|
|
int control_use_bank2;
|
|
|
|
unsigned long total_vram;
|
|
|
|
unsigned char vram_attr;
|
|
|
|
};
|
|
|
|
|
|
|
|
/* control register access macro */
|
|
|
|
#define CNTRL_REG(INFO,REG) (&(((INFO)->control_regs->REG).r))
|
|
|
|
|
|
|
|
|
|
|
|
/******************** Prototypes for exported functions ********************/
|
|
|
|
/*
|
|
|
|
* struct fb_ops
|
|
|
|
*/
|
|
|
|
static int controlfb_pan_display(struct fb_var_screeninfo *var,
|
|
|
|
struct fb_info *info);
|
|
|
|
static int controlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
|
|
|
|
u_int transp, struct fb_info *info);
|
|
|
|
static int controlfb_blank(int blank_mode, struct fb_info *info);
|
2006-01-15 05:21:25 +08:00
|
|
|
static int controlfb_mmap(struct fb_info *info,
|
2005-04-17 06:20:36 +08:00
|
|
|
struct vm_area_struct *vma);
|
|
|
|
static int controlfb_set_par (struct fb_info *info);
|
|
|
|
static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info);
|
|
|
|
|
|
|
|
/******************** Prototypes for internal functions **********************/
|
|
|
|
|
|
|
|
static void set_control_clock(unsigned char *params);
|
|
|
|
static int init_control(struct fb_info_control *p);
|
|
|
|
static void control_set_hardware(struct fb_info_control *p,
|
|
|
|
struct fb_par_control *par);
|
|
|
|
static int control_of_init(struct device_node *dp);
|
|
|
|
static void find_vram_size(struct fb_info_control *p);
|
|
|
|
static int read_control_sense(struct fb_info_control *p);
|
|
|
|
static int calc_clock_params(unsigned long clk, unsigned char *param);
|
|
|
|
static int control_var_to_par(struct fb_var_screeninfo *var,
|
|
|
|
struct fb_par_control *par, const struct fb_info *fb_info);
|
|
|
|
static inline void control_par_to_var(struct fb_par_control *par,
|
|
|
|
struct fb_var_screeninfo *var);
|
|
|
|
static void control_init_info(struct fb_info *info, struct fb_info_control *p);
|
|
|
|
static void control_cleanup(void);
|
|
|
|
|
|
|
|
|
|
|
|
/************************** Internal variables *******************************/
|
|
|
|
|
|
|
|
static struct fb_info_control *control_fb;
|
|
|
|
|
|
|
|
static int default_vmode __initdata = VMODE_NVRAM;
|
|
|
|
static int default_cmode __initdata = CMODE_NVRAM;
|
|
|
|
|
|
|
|
|
|
|
|
static struct fb_ops controlfb_ops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.fb_check_var = controlfb_check_var,
|
|
|
|
.fb_set_par = controlfb_set_par,
|
|
|
|
.fb_setcolreg = controlfb_setcolreg,
|
|
|
|
.fb_pan_display = controlfb_pan_display,
|
|
|
|
.fb_blank = controlfb_blank,
|
|
|
|
.fb_mmap = controlfb_mmap,
|
|
|
|
.fb_fillrect = cfb_fillrect,
|
|
|
|
.fb_copyarea = cfb_copyarea,
|
|
|
|
.fb_imageblit = cfb_imageblit,
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
|
|
/******************** The functions for controlfb_ops ********************/
|
|
|
|
|
|
|
|
#ifdef MODULE
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
int init_module(void)
|
|
|
|
{
|
|
|
|
struct device_node *dp;
|
2007-04-24 11:53:04 +08:00
|
|
|
int ret = -ENXIO;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-04-24 11:53:04 +08:00
|
|
|
dp = of_find_node_by_name(NULL, "control");
|
2019-06-21 21:13:14 +08:00
|
|
|
if (dp && !control_of_init(dp))
|
2007-04-24 11:53:04 +08:00
|
|
|
ret = 0;
|
|
|
|
of_node_put(dp);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-04-24 11:53:04 +08:00
|
|
|
return ret;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
void cleanup_module(void)
|
|
|
|
{
|
|
|
|
control_cleanup();
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Checks a var structure
|
|
|
|
*/
|
|
|
|
static int controlfb_check_var (struct fb_var_screeninfo *var, struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct fb_par_control par;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = control_var_to_par(var, &par, info);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
control_par_to_var(&par, var);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Applies current var to display
|
|
|
|
*/
|
|
|
|
static int controlfb_set_par (struct fb_info *info)
|
|
|
|
{
|
2014-09-18 03:00:16 +08:00
|
|
|
struct fb_info_control *p =
|
|
|
|
container_of(info, struct fb_info_control, info);
|
2005-04-17 06:20:36 +08:00
|
|
|
struct fb_par_control par;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
if((err = control_var_to_par(&info->var, &par, info))) {
|
|
|
|
printk (KERN_ERR "controlfb_set_par: error calling"
|
|
|
|
" control_var_to_par: %d.\n", err);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
control_set_hardware(p, &par);
|
|
|
|
|
|
|
|
info->fix.visual = (p->par.cmode == CMODE_8) ?
|
|
|
|
FB_VISUAL_PSEUDOCOLOR : FB_VISUAL_DIRECTCOLOR;
|
|
|
|
info->fix.line_length = p->par.pitch;
|
|
|
|
info->fix.xpanstep = 32 >> p->par.cmode;
|
|
|
|
info->fix.ypanstep = 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set screen start address according to var offset values
|
|
|
|
*/
|
|
|
|
static inline void set_screen_start(int xoffset, int yoffset,
|
|
|
|
struct fb_info_control *p)
|
|
|
|
{
|
|
|
|
struct fb_par_control *par = &p->par;
|
|
|
|
|
|
|
|
par->xoffset = xoffset;
|
|
|
|
par->yoffset = yoffset;
|
|
|
|
out_le32(CNTRL_REG(p,start_addr),
|
|
|
|
par->yoffset * par->pitch + (par->xoffset << par->cmode));
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int controlfb_pan_display(struct fb_var_screeninfo *var,
|
|
|
|
struct fb_info *info)
|
|
|
|
{
|
|
|
|
unsigned int xoffset, hstep;
|
2014-09-18 03:00:16 +08:00
|
|
|
struct fb_info_control *p =
|
|
|
|
container_of(info, struct fb_info_control, info);
|
2005-04-17 06:20:36 +08:00
|
|
|
struct fb_par_control *par = &p->par;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* make sure start addr will be 32-byte aligned
|
|
|
|
*/
|
|
|
|
hstep = 0x1f >> par->cmode;
|
|
|
|
xoffset = (var->xoffset + hstep) & ~hstep;
|
|
|
|
|
|
|
|
if (xoffset+par->xres > par->vxres ||
|
|
|
|
var->yoffset+par->yres > par->vyres)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
set_screen_start(xoffset, var->yoffset, p);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Private mmap since we want to have a different caching on the framebuffer
|
|
|
|
* for controlfb.
|
|
|
|
* Note there's no locking in here; it's done in fb_mmap() in fbmem.c.
|
|
|
|
*/
|
2006-01-15 05:21:25 +08:00
|
|
|
static int controlfb_mmap(struct fb_info *info,
|
2005-04-17 06:20:36 +08:00
|
|
|
struct vm_area_struct *vma)
|
|
|
|
{
|
2013-04-17 18:44:19 +08:00
|
|
|
unsigned long mmio_pgoff;
|
|
|
|
unsigned long start;
|
|
|
|
u32 len;
|
|
|
|
|
|
|
|
start = info->fix.smem_start;
|
|
|
|
len = info->fix.smem_len;
|
|
|
|
mmio_pgoff = PAGE_ALIGN((start & ~PAGE_MASK) + len) >> PAGE_SHIFT;
|
|
|
|
if (vma->vm_pgoff >= mmio_pgoff) {
|
|
|
|
if (info->var.accel_flags)
|
|
|
|
return -EINVAL;
|
|
|
|
vma->vm_pgoff -= mmio_pgoff;
|
|
|
|
start = info->fix.mmio_start;
|
|
|
|
len = info->fix.mmio_len;
|
|
|
|
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
|
|
|
|
} else {
|
|
|
|
/* framebuffer */
|
|
|
|
vma->vm_page_prot = pgprot_cached_wthru(vma->vm_page_prot);
|
|
|
|
}
|
|
|
|
|
|
|
|
return vm_iomap_memory(vma, start, len);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int controlfb_blank(int blank_mode, struct fb_info *info)
|
|
|
|
{
|
2014-09-18 03:00:16 +08:00
|
|
|
struct fb_info_control *p =
|
|
|
|
container_of(info, struct fb_info_control, info);
|
2005-04-17 06:20:36 +08:00
|
|
|
unsigned ctrl;
|
|
|
|
|
2015-02-03 13:36:21 +08:00
|
|
|
ctrl = le32_to_cpup(CNTRL_REG(p,ctrl));
|
2005-04-17 06:20:36 +08:00
|
|
|
if (blank_mode > 0)
|
|
|
|
switch (blank_mode) {
|
|
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
|
|
ctrl &= ~3;
|
|
|
|
break;
|
|
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
|
|
ctrl &= ~0x30;
|
|
|
|
break;
|
|
|
|
case FB_BLANK_POWERDOWN:
|
|
|
|
ctrl &= ~0x33;
|
|
|
|
/* fall through */
|
|
|
|
case FB_BLANK_NORMAL:
|
|
|
|
ctrl |= 0x400;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
ctrl &= ~0x400;
|
|
|
|
ctrl |= 0x33;
|
|
|
|
}
|
|
|
|
out_le32(CNTRL_REG(p,ctrl), ctrl);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int controlfb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
|
|
|
|
u_int transp, struct fb_info *info)
|
|
|
|
{
|
2014-09-18 03:00:16 +08:00
|
|
|
struct fb_info_control *p =
|
|
|
|
container_of(info, struct fb_info_control, info);
|
2005-04-17 06:20:36 +08:00
|
|
|
__u8 r, g, b;
|
|
|
|
|
|
|
|
if (regno > 255)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
r = red >> 8;
|
|
|
|
g = green >> 8;
|
|
|
|
b = blue >> 8;
|
|
|
|
|
|
|
|
out_8(&p->cmap_regs->addr, regno); /* tell clut what addr to fill */
|
|
|
|
out_8(&p->cmap_regs->lut, r); /* send one color channel at */
|
|
|
|
out_8(&p->cmap_regs->lut, g); /* a time... */
|
|
|
|
out_8(&p->cmap_regs->lut, b);
|
|
|
|
|
|
|
|
if (regno < 16) {
|
|
|
|
int i;
|
|
|
|
switch (p->par.cmode) {
|
|
|
|
case CMODE_16:
|
|
|
|
p->pseudo_palette[regno] =
|
|
|
|
(regno << 10) | (regno << 5) | regno;
|
|
|
|
break;
|
|
|
|
case CMODE_32:
|
|
|
|
i = (regno << 8) | regno;
|
|
|
|
p->pseudo_palette[regno] = (i << 16) | i;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/******************** End of controlfb_ops implementation ******************/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static void set_control_clock(unsigned char *params)
|
|
|
|
{
|
|
|
|
#ifdef CONFIG_ADB_CUDA
|
|
|
|
struct adb_request req;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < 3; ++i) {
|
|
|
|
cuda_request(&req, NULL, 5, CUDA_PACKET, CUDA_GET_SET_IIC,
|
|
|
|
0x50, i + 1, params[i]);
|
|
|
|
while (!req.complete)
|
|
|
|
cuda_poll();
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* finish off the driver initialization and register
|
|
|
|
*/
|
|
|
|
static int __init init_control(struct fb_info_control *p)
|
|
|
|
{
|
|
|
|
int full, sense, vmode, cmode, vyres;
|
|
|
|
struct fb_var_screeninfo var;
|
|
|
|
int rc;
|
|
|
|
|
|
|
|
printk(KERN_INFO "controlfb: ");
|
|
|
|
|
|
|
|
full = p->total_vram == 0x400000;
|
|
|
|
|
|
|
|
/* Try to pick a video mode out of NVRAM if we have one. */
|
powerpc, fbdev: Use NV_CMODE and NV_VMODE only when CONFIG_PPC32 && CONFIG_PPC_PMAC && CONFIG_NVRAM
This patch addresses inconsistencies in Mac framebuffer drivers and their
use of Kconfig symbols relating to NVRAM, so PPC64 can use CONFIG_NVRAM.
The defined(CONFIG_NVRAM) condition is replaced with the weaker
IS_REACHABLE(CONFIG_NVRAM) condition, like atari_scsi.
Macintosh framebuffer drivers use default settings for color mode and
video mode that are found in NVRAM. On PCI Macs, MacOS stores display
settings in the Name Registry (NR) partition in NVRAM*. On NuBus Macs,
there is no NR partition and MacOS stores display mode settings in PRAM**.
Early-model Macs are the ones most likely to benefit from these settings,
since they are more likely to have a fixed-frequency monitor connected to
the built-in framebuffer device. Moreover, a single NV_CMODE value and
a single NV_VMODE value provide for only one display.
The NV_CMODE and NV_VMODE constants are apparently offsets into the NR
partition for Old World machines. This also suggests that these defaults
are not useful on later models. The NR partition seems to be optional on
New World machines. CONFIG_NVRAM cannot be enabled on PPC64 at present.
It is safe to say that NVRAM support in PowerMac fbdev drivers is only
applicable to CONFIG_PPC32 so make this condition explicit. This means
matroxfb driver won't crash on PPC64 when CONFIG_NVRAM becomes available
there.
For imsttfb, add the missing CONFIG_NVRAM test to prevent a build failure,
since PPC64 does not implement nvram_read_byte(). Also add a missing
machine_is(powermac) check. Change the inconsistent dependency on
CONFIG_PPC and the matching #ifdef tests to CONFIG_PPC_PMAC.
For valkyriefb, to improve clarity and consistency with the other PowerMac
fbdev drivers, test for CONFIG_PPC_PMAC instead of !CONFIG_MAC. Remove a
bogus comment regarding PRAM.
* See GetPreferredConfiguration and SavePreferredConfiguration in
"Designing PCI Cards and Drivers for Power Macintosh Computers".
** See SetDefaultMode and GetDefaultMode in "Designing Cards and Drivers
for the Macintosh Family".
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-15 12:18:56 +08:00
|
|
|
cmode = default_cmode;
|
|
|
|
if (IS_REACHABLE(CONFIG_NVRAM) && cmode == CMODE_NVRAM)
|
2005-04-17 06:20:36 +08:00
|
|
|
cmode = nvram_read_byte(NV_CMODE);
|
powerpc, fbdev: Use NV_CMODE and NV_VMODE only when CONFIG_PPC32 && CONFIG_PPC_PMAC && CONFIG_NVRAM
This patch addresses inconsistencies in Mac framebuffer drivers and their
use of Kconfig symbols relating to NVRAM, so PPC64 can use CONFIG_NVRAM.
The defined(CONFIG_NVRAM) condition is replaced with the weaker
IS_REACHABLE(CONFIG_NVRAM) condition, like atari_scsi.
Macintosh framebuffer drivers use default settings for color mode and
video mode that are found in NVRAM. On PCI Macs, MacOS stores display
settings in the Name Registry (NR) partition in NVRAM*. On NuBus Macs,
there is no NR partition and MacOS stores display mode settings in PRAM**.
Early-model Macs are the ones most likely to benefit from these settings,
since they are more likely to have a fixed-frequency monitor connected to
the built-in framebuffer device. Moreover, a single NV_CMODE value and
a single NV_VMODE value provide for only one display.
The NV_CMODE and NV_VMODE constants are apparently offsets into the NR
partition for Old World machines. This also suggests that these defaults
are not useful on later models. The NR partition seems to be optional on
New World machines. CONFIG_NVRAM cannot be enabled on PPC64 at present.
It is safe to say that NVRAM support in PowerMac fbdev drivers is only
applicable to CONFIG_PPC32 so make this condition explicit. This means
matroxfb driver won't crash on PPC64 when CONFIG_NVRAM becomes available
there.
For imsttfb, add the missing CONFIG_NVRAM test to prevent a build failure,
since PPC64 does not implement nvram_read_byte(). Also add a missing
machine_is(powermac) check. Change the inconsistent dependency on
CONFIG_PPC and the matching #ifdef tests to CONFIG_PPC_PMAC.
For valkyriefb, to improve clarity and consistency with the other PowerMac
fbdev drivers, test for CONFIG_PPC_PMAC instead of !CONFIG_MAC. Remove a
bogus comment regarding PRAM.
* See GetPreferredConfiguration and SavePreferredConfiguration in
"Designing PCI Cards and Drivers for Power Macintosh Computers".
** See SetDefaultMode and GetDefaultMode in "Designing Cards and Drivers
for the Macintosh Family".
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-15 12:18:56 +08:00
|
|
|
if (cmode < CMODE_8 || cmode > CMODE_32)
|
|
|
|
cmode = CMODE_8;
|
|
|
|
|
|
|
|
vmode = default_vmode;
|
|
|
|
if (IS_REACHABLE(CONFIG_NVRAM) && vmode == VMODE_NVRAM)
|
2005-04-17 06:20:36 +08:00
|
|
|
vmode = nvram_read_byte(NV_VMODE);
|
powerpc, fbdev: Use NV_CMODE and NV_VMODE only when CONFIG_PPC32 && CONFIG_PPC_PMAC && CONFIG_NVRAM
This patch addresses inconsistencies in Mac framebuffer drivers and their
use of Kconfig symbols relating to NVRAM, so PPC64 can use CONFIG_NVRAM.
The defined(CONFIG_NVRAM) condition is replaced with the weaker
IS_REACHABLE(CONFIG_NVRAM) condition, like atari_scsi.
Macintosh framebuffer drivers use default settings for color mode and
video mode that are found in NVRAM. On PCI Macs, MacOS stores display
settings in the Name Registry (NR) partition in NVRAM*. On NuBus Macs,
there is no NR partition and MacOS stores display mode settings in PRAM**.
Early-model Macs are the ones most likely to benefit from these settings,
since they are more likely to have a fixed-frequency monitor connected to
the built-in framebuffer device. Moreover, a single NV_CMODE value and
a single NV_VMODE value provide for only one display.
The NV_CMODE and NV_VMODE constants are apparently offsets into the NR
partition for Old World machines. This also suggests that these defaults
are not useful on later models. The NR partition seems to be optional on
New World machines. CONFIG_NVRAM cannot be enabled on PPC64 at present.
It is safe to say that NVRAM support in PowerMac fbdev drivers is only
applicable to CONFIG_PPC32 so make this condition explicit. This means
matroxfb driver won't crash on PPC64 when CONFIG_NVRAM becomes available
there.
For imsttfb, add the missing CONFIG_NVRAM test to prevent a build failure,
since PPC64 does not implement nvram_read_byte(). Also add a missing
machine_is(powermac) check. Change the inconsistent dependency on
CONFIG_PPC and the matching #ifdef tests to CONFIG_PPC_PMAC.
For valkyriefb, to improve clarity and consistency with the other PowerMac
fbdev drivers, test for CONFIG_PPC_PMAC instead of !CONFIG_MAC. Remove a
bogus comment regarding PRAM.
* See GetPreferredConfiguration and SavePreferredConfiguration in
"Designing PCI Cards and Drivers for Power Macintosh Computers".
** See SetDefaultMode and GetDefaultMode in "Designing Cards and Drivers
for the Macintosh Family".
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-15 12:18:56 +08:00
|
|
|
if (vmode < 1 || vmode > VMODE_MAX ||
|
|
|
|
control_mac_modes[vmode - 1].m[full] < cmode) {
|
|
|
|
sense = read_control_sense(p);
|
|
|
|
printk(KERN_CONT "Monitor sense value = 0x%x, ", sense);
|
|
|
|
vmode = mac_map_monitor_sense(sense);
|
|
|
|
if (control_mac_modes[vmode - 1].m[full] < 0)
|
|
|
|
vmode = VMODE_640_480_60;
|
|
|
|
cmode = min(cmode, control_mac_modes[vmode - 1].m[full]);
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Initialize info structure */
|
|
|
|
control_init_info(&p->info, p);
|
|
|
|
|
|
|
|
/* Setup default var */
|
|
|
|
if (mac_vmode_to_var(vmode, cmode, &var) < 0) {
|
|
|
|
/* This shouldn't happen! */
|
|
|
|
printk("mac_vmode_to_var(%d, %d,) failed\n", vmode, cmode);
|
|
|
|
try_again:
|
|
|
|
vmode = VMODE_640_480_60;
|
|
|
|
cmode = CMODE_8;
|
|
|
|
if (mac_vmode_to_var(vmode, cmode, &var) < 0) {
|
|
|
|
printk(KERN_ERR "controlfb: mac_vmode_to_var() failed\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
printk(KERN_INFO "controlfb: ");
|
|
|
|
}
|
|
|
|
printk("using video mode %d and color mode %d.\n", vmode, cmode);
|
|
|
|
|
|
|
|
vyres = (p->total_vram - CTRLFB_OFF) / (var.xres << cmode);
|
|
|
|
if (vyres > var.yres)
|
|
|
|
var.yres_virtual = vyres;
|
|
|
|
|
|
|
|
/* Apply default var */
|
|
|
|
var.activate = FB_ACTIVATE_NOW;
|
|
|
|
rc = fb_set_var(&p->info, &var);
|
|
|
|
if (rc && (vmode != VMODE_640_480_60 || cmode != CMODE_8))
|
|
|
|
goto try_again;
|
|
|
|
|
|
|
|
/* Register with fbdev layer */
|
|
|
|
if (register_framebuffer(&p->info) < 0)
|
|
|
|
return -ENXIO;
|
2013-09-20 09:35:55 +08:00
|
|
|
|
|
|
|
fb_info(&p->info, "control display adapter\n");
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#define RADACAL_WRITE(a,d) \
|
|
|
|
out_8(&p->cmap_regs->addr, (a)); \
|
|
|
|
out_8(&p->cmap_regs->dat, (d))
|
|
|
|
|
|
|
|
/* Now how about actually saying, Make it so! */
|
|
|
|
/* Some things in here probably don't need to be done each time. */
|
|
|
|
static void control_set_hardware(struct fb_info_control *p, struct fb_par_control *par)
|
|
|
|
{
|
|
|
|
struct control_regvals *r;
|
|
|
|
volatile struct preg __iomem *rp;
|
|
|
|
int i, cmode;
|
|
|
|
|
|
|
|
if (PAR_EQUAL(&p->par, par)) {
|
|
|
|
/*
|
|
|
|
* check if only xoffset or yoffset differs.
|
|
|
|
* this prevents flickers in typical VT switch case.
|
|
|
|
*/
|
|
|
|
if (p->par.xoffset != par->xoffset ||
|
|
|
|
p->par.yoffset != par->yoffset)
|
|
|
|
set_screen_start(par->xoffset, par->yoffset, p);
|
|
|
|
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
p->par = *par;
|
|
|
|
cmode = p->par.cmode;
|
|
|
|
r = &par->regvals;
|
|
|
|
|
|
|
|
/* Turn off display */
|
|
|
|
out_le32(CNTRL_REG(p,ctrl), 0x400 | par->ctrl);
|
|
|
|
|
|
|
|
set_control_clock(r->clock_params);
|
|
|
|
|
|
|
|
RADACAL_WRITE(0x20, r->radacal_ctrl);
|
|
|
|
RADACAL_WRITE(0x21, p->control_use_bank2 ? 0 : 1);
|
|
|
|
RADACAL_WRITE(0x10, 0);
|
|
|
|
RADACAL_WRITE(0x11, 0);
|
|
|
|
|
|
|
|
rp = &p->control_regs->vswin;
|
|
|
|
for (i = 0; i < 16; ++i, ++rp)
|
|
|
|
out_le32(&rp->r, r->regs[i]);
|
|
|
|
|
|
|
|
out_le32(CNTRL_REG(p,pitch), par->pitch);
|
|
|
|
out_le32(CNTRL_REG(p,mode), r->mode);
|
|
|
|
out_le32(CNTRL_REG(p,vram_attr), p->vram_attr);
|
|
|
|
out_le32(CNTRL_REG(p,start_addr), par->yoffset * par->pitch
|
|
|
|
+ (par->xoffset << cmode));
|
|
|
|
out_le32(CNTRL_REG(p,rfrcnt), 0x1e5);
|
|
|
|
out_le32(CNTRL_REG(p,intr_ena), 0);
|
|
|
|
|
|
|
|
/* Turn on display */
|
|
|
|
out_le32(CNTRL_REG(p,ctrl), par->ctrl);
|
|
|
|
|
|
|
|
#ifdef CONFIG_BOOTX_TEXT
|
|
|
|
btext_update_display(p->frame_buffer_phys + CTRLFB_OFF,
|
|
|
|
p->par.xres, p->par.yres,
|
|
|
|
(cmode == CMODE_32? 32: cmode == CMODE_16? 16: 8),
|
|
|
|
p->par.pitch);
|
|
|
|
#endif /* CONFIG_BOOTX_TEXT */
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
2011-06-24 06:35:19 +08:00
|
|
|
* Parse user specified options (`video=controlfb:')
|
2005-04-17 06:20:36 +08:00
|
|
|
*/
|
2005-12-13 15:01:21 +08:00
|
|
|
static void __init control_setup(char *options)
|
|
|
|
{
|
|
|
|
char *this_opt;
|
|
|
|
|
|
|
|
if (!options || !*options)
|
|
|
|
return;
|
|
|
|
|
|
|
|
while ((this_opt = strsep(&options, ",")) != NULL) {
|
|
|
|
if (!strncmp(this_opt, "vmode:", 6)) {
|
|
|
|
int vmode = simple_strtoul(this_opt+6, NULL, 0);
|
|
|
|
if (vmode > 0 && vmode <= VMODE_MAX &&
|
|
|
|
control_mac_modes[vmode - 1].m[1] >= 0)
|
|
|
|
default_vmode = vmode;
|
|
|
|
} else if (!strncmp(this_opt, "cmode:", 6)) {
|
|
|
|
int depth = simple_strtoul(this_opt+6, NULL, 0);
|
|
|
|
switch (depth) {
|
|
|
|
case CMODE_8:
|
|
|
|
case CMODE_16:
|
|
|
|
case CMODE_32:
|
|
|
|
default_cmode = depth;
|
|
|
|
break;
|
|
|
|
case 8:
|
|
|
|
default_cmode = CMODE_8;
|
|
|
|
break;
|
|
|
|
case 15:
|
|
|
|
case 16:
|
|
|
|
default_cmode = CMODE_16;
|
|
|
|
break;
|
|
|
|
case 24:
|
|
|
|
case 32:
|
|
|
|
default_cmode = CMODE_32;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __init control_init(void)
|
2005-04-17 06:20:36 +08:00
|
|
|
{
|
|
|
|
struct device_node *dp;
|
|
|
|
char *option = NULL;
|
2007-04-24 11:53:04 +08:00
|
|
|
int ret = -ENXIO;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
if (fb_get_options("controlfb", &option))
|
|
|
|
return -ENODEV;
|
|
|
|
control_setup(option);
|
|
|
|
|
2007-04-24 11:53:04 +08:00
|
|
|
dp = of_find_node_by_name(NULL, "control");
|
2019-06-21 21:13:14 +08:00
|
|
|
if (dp && !control_of_init(dp))
|
2007-04-24 11:53:04 +08:00
|
|
|
ret = 0;
|
|
|
|
of_node_put(dp);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
2007-04-24 11:53:04 +08:00
|
|
|
return ret;
|
2005-04-17 06:20:36 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
module_init(control_init);
|
|
|
|
|
|
|
|
/* Work out which banks of VRAM we have installed. */
|
|
|
|
/* danj: I guess the card just ignores writes to nonexistant VRAM... */
|
|
|
|
|
|
|
|
static void __init find_vram_size(struct fb_info_control *p)
|
|
|
|
{
|
|
|
|
int bank1, bank2;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set VRAM in 2MB (bank 1) mode
|
|
|
|
* VRAM Bank 2 will be accessible through offset 0x600000 if present
|
|
|
|
* and VRAM Bank 1 will not respond at that offset even if present
|
|
|
|
*/
|
|
|
|
out_le32(CNTRL_REG(p,vram_attr), 0x31);
|
|
|
|
|
|
|
|
out_8(&p->frame_buffer[0x600000], 0xb3);
|
|
|
|
out_8(&p->frame_buffer[0x600001], 0x71);
|
|
|
|
asm volatile("eieio; dcbf 0,%0" : : "r" (&p->frame_buffer[0x600000])
|
|
|
|
: "memory" );
|
|
|
|
mb();
|
|
|
|
asm volatile("eieio; dcbi 0,%0" : : "r" (&p->frame_buffer[0x600000])
|
|
|
|
: "memory" );
|
|
|
|
mb();
|
|
|
|
|
|
|
|
bank2 = (in_8(&p->frame_buffer[0x600000]) == 0xb3)
|
|
|
|
&& (in_8(&p->frame_buffer[0x600001]) == 0x71);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set VRAM in 2MB (bank 2) mode
|
|
|
|
* VRAM Bank 1 will be accessible through offset 0x000000 if present
|
|
|
|
* and VRAM Bank 2 will not respond at that offset even if present
|
|
|
|
*/
|
|
|
|
out_le32(CNTRL_REG(p,vram_attr), 0x39);
|
|
|
|
|
|
|
|
out_8(&p->frame_buffer[0], 0x5a);
|
|
|
|
out_8(&p->frame_buffer[1], 0xc7);
|
|
|
|
asm volatile("eieio; dcbf 0,%0" : : "r" (&p->frame_buffer[0])
|
|
|
|
: "memory" );
|
|
|
|
mb();
|
|
|
|
asm volatile("eieio; dcbi 0,%0" : : "r" (&p->frame_buffer[0])
|
|
|
|
: "memory" );
|
|
|
|
mb();
|
|
|
|
|
|
|
|
bank1 = (in_8(&p->frame_buffer[0]) == 0x5a)
|
|
|
|
&& (in_8(&p->frame_buffer[1]) == 0xc7);
|
|
|
|
|
|
|
|
if (bank2) {
|
|
|
|
if (!bank1) {
|
|
|
|
/*
|
|
|
|
* vram bank 2 only
|
|
|
|
*/
|
|
|
|
p->control_use_bank2 = 1;
|
|
|
|
p->vram_attr = 0x39;
|
|
|
|
p->frame_buffer += 0x600000;
|
|
|
|
p->frame_buffer_phys += 0x600000;
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* 4 MB vram
|
|
|
|
*/
|
|
|
|
p->vram_attr = 0x51;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* vram bank 1 only
|
|
|
|
*/
|
|
|
|
p->vram_attr = 0x31;
|
|
|
|
}
|
|
|
|
|
|
|
|
p->total_vram = (bank1 + bank2) * 0x200000;
|
|
|
|
|
|
|
|
printk(KERN_INFO "controlfb: VRAM Total = %dMB "
|
|
|
|
"(%dMB @ bank 1, %dMB @ bank 2)\n",
|
|
|
|
(bank1 + bank2) << 1, bank1 << 1, bank2 << 1);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* find "control" and initialize
|
|
|
|
*/
|
|
|
|
static int __init control_of_init(struct device_node *dp)
|
|
|
|
{
|
|
|
|
struct fb_info_control *p;
|
2005-12-13 15:01:21 +08:00
|
|
|
struct resource fb_res, reg_res;
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
if (control_fb) {
|
|
|
|
printk(KERN_ERR "controlfb: only one control is supported\n");
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
2005-12-13 15:01:21 +08:00
|
|
|
|
|
|
|
if (of_pci_address_to_resource(dp, 2, &fb_res) ||
|
|
|
|
of_pci_address_to_resource(dp, 1, ®_res)) {
|
|
|
|
printk(KERN_ERR "can't get 2 addresses for control\n");
|
2005-04-17 06:20:36 +08:00
|
|
|
return -ENXIO;
|
|
|
|
}
|
2007-02-12 16:55:12 +08:00
|
|
|
p = kzalloc(sizeof(*p), GFP_KERNEL);
|
2019-06-21 21:13:14 +08:00
|
|
|
if (!p)
|
|
|
|
return -ENOMEM;
|
2005-04-17 06:20:36 +08:00
|
|
|
control_fb = p; /* save it for cleanups */
|
|
|
|
|
|
|
|
/* Map in frame buffer and registers */
|
2005-12-13 15:01:21 +08:00
|
|
|
p->fb_orig_base = fb_res.start;
|
2011-06-10 00:13:32 +08:00
|
|
|
p->fb_orig_size = resource_size(&fb_res);
|
2005-12-13 15:01:21 +08:00
|
|
|
/* use the big-endian aperture (??) */
|
|
|
|
p->frame_buffer_phys = fb_res.start + 0x800000;
|
|
|
|
p->control_regs_phys = reg_res.start;
|
2011-06-10 00:13:32 +08:00
|
|
|
p->control_regs_size = resource_size(®_res);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
if (!p->fb_orig_base ||
|
|
|
|
!request_mem_region(p->fb_orig_base,p->fb_orig_size,"controlfb")) {
|
|
|
|
p->fb_orig_base = 0;
|
|
|
|
goto error_out;
|
|
|
|
}
|
|
|
|
/* map at most 8MB for the frame buffer */
|
2018-10-09 21:51:35 +08:00
|
|
|
p->frame_buffer = ioremap_wt(p->frame_buffer_phys, 0x800000);
|
2005-04-17 06:20:36 +08:00
|
|
|
|
|
|
|
if (!p->control_regs_phys ||
|
|
|
|
!request_mem_region(p->control_regs_phys, p->control_regs_size,
|
|
|
|
"controlfb regs")) {
|
|
|
|
p->control_regs_phys = 0;
|
|
|
|
goto error_out;
|
|
|
|
}
|
|
|
|
p->control_regs = ioremap(p->control_regs_phys, p->control_regs_size);
|
|
|
|
|
|
|
|
p->cmap_regs_phys = 0xf301b000; /* XXX not in prom? */
|
|
|
|
if (!request_mem_region(p->cmap_regs_phys, 0x1000, "controlfb cmap")) {
|
|
|
|
p->cmap_regs_phys = 0;
|
|
|
|
goto error_out;
|
|
|
|
}
|
|
|
|
p->cmap_regs = ioremap(p->cmap_regs_phys, 0x1000);
|
|
|
|
|
|
|
|
if (!p->cmap_regs || !p->control_regs || !p->frame_buffer)
|
|
|
|
goto error_out;
|
|
|
|
|
|
|
|
find_vram_size(p);
|
|
|
|
if (!p->total_vram)
|
|
|
|
goto error_out;
|
|
|
|
|
|
|
|
if (init_control(p) < 0)
|
|
|
|
goto error_out;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
error_out:
|
|
|
|
control_cleanup();
|
|
|
|
return -ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get the monitor sense value.
|
|
|
|
* Note that this can be called before calibrate_delay,
|
|
|
|
* so we can't use udelay.
|
|
|
|
*/
|
|
|
|
static int read_control_sense(struct fb_info_control *p)
|
|
|
|
{
|
|
|
|
int sense;
|
|
|
|
|
|
|
|
out_le32(CNTRL_REG(p,mon_sense), 7); /* drive all lines high */
|
|
|
|
__delay(200);
|
|
|
|
out_le32(CNTRL_REG(p,mon_sense), 077); /* turn off drivers */
|
|
|
|
__delay(2000);
|
|
|
|
sense = (in_le32(CNTRL_REG(p,mon_sense)) & 0x1c0) << 2;
|
|
|
|
|
|
|
|
/* drive each sense line low in turn and collect the other 2 */
|
|
|
|
out_le32(CNTRL_REG(p,mon_sense), 033); /* drive A low */
|
|
|
|
__delay(2000);
|
|
|
|
sense |= (in_le32(CNTRL_REG(p,mon_sense)) & 0xc0) >> 2;
|
|
|
|
out_le32(CNTRL_REG(p,mon_sense), 055); /* drive B low */
|
|
|
|
__delay(2000);
|
|
|
|
sense |= ((in_le32(CNTRL_REG(p,mon_sense)) & 0x100) >> 5)
|
|
|
|
| ((in_le32(CNTRL_REG(p,mon_sense)) & 0x40) >> 4);
|
|
|
|
out_le32(CNTRL_REG(p,mon_sense), 066); /* drive C low */
|
|
|
|
__delay(2000);
|
|
|
|
sense |= (in_le32(CNTRL_REG(p,mon_sense)) & 0x180) >> 7;
|
|
|
|
|
|
|
|
out_le32(CNTRL_REG(p,mon_sense), 077); /* turn off drivers */
|
|
|
|
|
|
|
|
return sense;
|
|
|
|
}
|
|
|
|
|
|
|
|
/********************** Various translation functions **********************/
|
|
|
|
|
|
|
|
#define CONTROL_PIXCLOCK_BASE 256016
|
|
|
|
#define CONTROL_PIXCLOCK_MIN 5000 /* ~ 200 MHz dot clock */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* calculate the clock paramaters to be sent to CUDA according to given
|
|
|
|
* pixclock in pico second.
|
|
|
|
*/
|
|
|
|
static int calc_clock_params(unsigned long clk, unsigned char *param)
|
|
|
|
{
|
|
|
|
unsigned long p0, p1, p2, k, l, m, n, min;
|
|
|
|
|
|
|
|
if (clk > (CONTROL_PIXCLOCK_BASE << 3))
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
p2 = ((clk << 4) < CONTROL_PIXCLOCK_BASE)? 3: 2;
|
|
|
|
l = clk << p2;
|
|
|
|
p0 = 0;
|
|
|
|
p1 = 0;
|
|
|
|
for (k = 1, min = l; k < 32; k++) {
|
|
|
|
unsigned long rem;
|
|
|
|
|
|
|
|
m = CONTROL_PIXCLOCK_BASE * k;
|
|
|
|
n = m / l;
|
|
|
|
rem = m % l;
|
|
|
|
if (n && (n < 128) && rem < min) {
|
|
|
|
p0 = k;
|
|
|
|
p1 = n;
|
|
|
|
min = rem;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
if (!p0 || !p1)
|
|
|
|
return 1;
|
|
|
|
|
|
|
|
param[0] = p0;
|
|
|
|
param[1] = p1;
|
|
|
|
param[2] = p2;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This routine takes a user-supplied var, and picks the best vmode/cmode
|
|
|
|
* from it.
|
|
|
|
*/
|
|
|
|
|
|
|
|
static int control_var_to_par(struct fb_var_screeninfo *var,
|
|
|
|
struct fb_par_control *par, const struct fb_info *fb_info)
|
|
|
|
{
|
|
|
|
int cmode, piped_diff, hstep;
|
|
|
|
unsigned hperiod, hssync, hsblank, hesync, heblank, piped, heq, hlfln,
|
|
|
|
hserr, vperiod, vssync, vesync, veblank, vsblank, vswin, vewin;
|
|
|
|
unsigned long pixclock;
|
2014-09-18 03:00:16 +08:00
|
|
|
struct fb_info_control *p =
|
|
|
|
container_of(fb_info, struct fb_info_control, info);
|
2005-04-17 06:20:36 +08:00
|
|
|
struct control_regvals *r = &par->regvals;
|
|
|
|
|
|
|
|
switch (var->bits_per_pixel) {
|
|
|
|
case 8:
|
|
|
|
par->cmode = CMODE_8;
|
|
|
|
if (p->total_vram > 0x200000) {
|
|
|
|
r->mode = 3;
|
|
|
|
r->radacal_ctrl = 0x20;
|
|
|
|
piped_diff = 13;
|
|
|
|
} else {
|
|
|
|
r->mode = 2;
|
|
|
|
r->radacal_ctrl = 0x10;
|
|
|
|
piped_diff = 9;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 15:
|
|
|
|
case 16:
|
|
|
|
par->cmode = CMODE_16;
|
|
|
|
if (p->total_vram > 0x200000) {
|
|
|
|
r->mode = 2;
|
|
|
|
r->radacal_ctrl = 0x24;
|
|
|
|
piped_diff = 5;
|
|
|
|
} else {
|
|
|
|
r->mode = 1;
|
|
|
|
r->radacal_ctrl = 0x14;
|
|
|
|
piped_diff = 3;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case 32:
|
|
|
|
par->cmode = CMODE_32;
|
|
|
|
if (p->total_vram > 0x200000) {
|
|
|
|
r->mode = 1;
|
|
|
|
r->radacal_ctrl = 0x28;
|
|
|
|
} else {
|
|
|
|
r->mode = 0;
|
|
|
|
r->radacal_ctrl = 0x18;
|
|
|
|
}
|
|
|
|
piped_diff = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* adjust xres and vxres so that the corresponding memory widths are
|
|
|
|
* 32-byte aligned
|
|
|
|
*/
|
|
|
|
hstep = 31 >> par->cmode;
|
|
|
|
par->xres = (var->xres + hstep) & ~hstep;
|
|
|
|
par->vxres = (var->xres_virtual + hstep) & ~hstep;
|
|
|
|
par->xoffset = (var->xoffset + hstep) & ~hstep;
|
|
|
|
if (par->vxres < par->xres)
|
|
|
|
par->vxres = par->xres;
|
|
|
|
par->pitch = par->vxres << par->cmode;
|
|
|
|
|
|
|
|
par->yres = var->yres;
|
|
|
|
par->vyres = var->yres_virtual;
|
|
|
|
par->yoffset = var->yoffset;
|
|
|
|
if (par->vyres < par->yres)
|
|
|
|
par->vyres = par->yres;
|
|
|
|
|
|
|
|
par->sync = var->sync;
|
|
|
|
|
|
|
|
if (par->pitch * par->vyres + CTRLFB_OFF > p->total_vram)
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (par->xoffset + par->xres > par->vxres)
|
|
|
|
par->xoffset = par->vxres - par->xres;
|
|
|
|
if (par->yoffset + par->yres > par->vyres)
|
|
|
|
par->yoffset = par->vyres - par->yres;
|
|
|
|
|
|
|
|
pixclock = (var->pixclock < CONTROL_PIXCLOCK_MIN)? CONTROL_PIXCLOCK_MIN:
|
|
|
|
var->pixclock;
|
|
|
|
if (calc_clock_params(pixclock, r->clock_params))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
hperiod = ((var->left_margin + par->xres + var->right_margin
|
|
|
|
+ var->hsync_len) >> 1) - 2;
|
|
|
|
hssync = hperiod + 1;
|
|
|
|
hsblank = hssync - (var->right_margin >> 1);
|
|
|
|
hesync = (var->hsync_len >> 1) - 1;
|
|
|
|
heblank = (var->left_margin >> 1) + hesync;
|
|
|
|
piped = heblank - piped_diff;
|
|
|
|
heq = var->hsync_len >> 2;
|
|
|
|
hlfln = (hperiod+2) >> 1;
|
|
|
|
hserr = hssync-hesync;
|
|
|
|
vperiod = (var->vsync_len + var->lower_margin + par->yres
|
|
|
|
+ var->upper_margin) << 1;
|
|
|
|
vssync = vperiod - 2;
|
|
|
|
vesync = (var->vsync_len << 1) - vperiod + vssync;
|
|
|
|
veblank = (var->upper_margin << 1) + vesync;
|
|
|
|
vsblank = vssync - (var->lower_margin << 1);
|
|
|
|
vswin = (vsblank+vssync) >> 1;
|
|
|
|
vewin = (vesync+veblank) >> 1;
|
|
|
|
|
|
|
|
r->regs[0] = vswin;
|
|
|
|
r->regs[1] = vsblank;
|
|
|
|
r->regs[2] = veblank;
|
|
|
|
r->regs[3] = vewin;
|
|
|
|
r->regs[4] = vesync;
|
|
|
|
r->regs[5] = vssync;
|
|
|
|
r->regs[6] = vperiod;
|
|
|
|
r->regs[7] = piped;
|
|
|
|
r->regs[8] = hperiod;
|
|
|
|
r->regs[9] = hsblank;
|
|
|
|
r->regs[10] = heblank;
|
|
|
|
r->regs[11] = hesync;
|
|
|
|
r->regs[12] = hssync;
|
|
|
|
r->regs[13] = heq;
|
|
|
|
r->regs[14] = hlfln;
|
|
|
|
r->regs[15] = hserr;
|
|
|
|
|
|
|
|
if (par->xres >= 1280 && par->cmode >= CMODE_16)
|
|
|
|
par->ctrl = 0x7f;
|
|
|
|
else
|
|
|
|
par->ctrl = 0x3b;
|
|
|
|
|
|
|
|
if (mac_var_to_vmode(var, &par->vmode, &cmode))
|
|
|
|
par->vmode = 0;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Convert hardware data in par to an fb_var_screeninfo
|
|
|
|
*/
|
|
|
|
|
|
|
|
static void control_par_to_var(struct fb_par_control *par, struct fb_var_screeninfo *var)
|
|
|
|
{
|
|
|
|
struct control_regints *rv;
|
|
|
|
|
|
|
|
rv = (struct control_regints *) par->regvals.regs;
|
|
|
|
|
|
|
|
memset(var, 0, sizeof(*var));
|
|
|
|
var->xres = par->xres;
|
|
|
|
var->yres = par->yres;
|
|
|
|
var->xres_virtual = par->vxres;
|
|
|
|
var->yres_virtual = par->vyres;
|
|
|
|
var->xoffset = par->xoffset;
|
|
|
|
var->yoffset = par->yoffset;
|
|
|
|
|
|
|
|
switch(par->cmode) {
|
|
|
|
default:
|
|
|
|
case CMODE_8:
|
|
|
|
var->bits_per_pixel = 8;
|
|
|
|
var->red.length = 8;
|
|
|
|
var->green.length = 8;
|
|
|
|
var->blue.length = 8;
|
|
|
|
break;
|
|
|
|
case CMODE_16: /* RGB 555 */
|
|
|
|
var->bits_per_pixel = 16;
|
|
|
|
var->red.offset = 10;
|
|
|
|
var->red.length = 5;
|
|
|
|
var->green.offset = 5;
|
|
|
|
var->green.length = 5;
|
|
|
|
var->blue.length = 5;
|
|
|
|
break;
|
|
|
|
case CMODE_32: /* RGB 888 */
|
|
|
|
var->bits_per_pixel = 32;
|
|
|
|
var->red.offset = 16;
|
|
|
|
var->red.length = 8;
|
|
|
|
var->green.offset = 8;
|
|
|
|
var->green.length = 8;
|
|
|
|
var->blue.length = 8;
|
|
|
|
var->transp.offset = 24;
|
|
|
|
var->transp.length = 8;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
var->height = -1;
|
|
|
|
var->width = -1;
|
|
|
|
var->vmode = FB_VMODE_NONINTERLACED;
|
|
|
|
|
|
|
|
var->left_margin = (rv->heblank - rv->hesync) << 1;
|
|
|
|
var->right_margin = (rv->hssync - rv->hsblank) << 1;
|
|
|
|
var->hsync_len = (rv->hperiod + 2 - rv->hssync + rv->hesync) << 1;
|
|
|
|
|
|
|
|
var->upper_margin = (rv->veblank - rv->vesync) >> 1;
|
|
|
|
var->lower_margin = (rv->vssync - rv->vsblank) >> 1;
|
|
|
|
var->vsync_len = (rv->vperiod - rv->vssync + rv->vesync) >> 1;
|
|
|
|
|
|
|
|
var->sync = par->sync;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* 10^12 * clock_params[0] / (3906400 * clock_params[1]
|
|
|
|
* * 2^clock_params[2])
|
|
|
|
* (10^12 * clock_params[0] / (3906400 * clock_params[1]))
|
|
|
|
* >> clock_params[2]
|
|
|
|
*/
|
|
|
|
/* (255990.17 * clock_params[0] / clock_params[1]) >> clock_params[2] */
|
|
|
|
var->pixclock = CONTROL_PIXCLOCK_BASE * par->regvals.clock_params[0];
|
|
|
|
var->pixclock /= par->regvals.clock_params[1];
|
|
|
|
var->pixclock >>= par->regvals.clock_params[2];
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set misc info vars for this driver
|
|
|
|
*/
|
|
|
|
static void __init control_init_info(struct fb_info *info, struct fb_info_control *p)
|
|
|
|
{
|
|
|
|
/* Fill fb_info */
|
|
|
|
info->par = &p->par;
|
|
|
|
info->fbops = &controlfb_ops;
|
|
|
|
info->pseudo_palette = p->pseudo_palette;
|
|
|
|
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
|
|
|
|
info->screen_base = p->frame_buffer + CTRLFB_OFF;
|
|
|
|
|
|
|
|
fb_alloc_cmap(&info->cmap, 256, 0);
|
|
|
|
|
|
|
|
/* Fill fix common fields */
|
|
|
|
strcpy(info->fix.id, "control");
|
|
|
|
info->fix.mmio_start = p->control_regs_phys;
|
|
|
|
info->fix.mmio_len = sizeof(struct control_regs);
|
|
|
|
info->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
|
|
info->fix.smem_start = p->frame_buffer_phys + CTRLFB_OFF;
|
|
|
|
info->fix.smem_len = p->total_vram - CTRLFB_OFF;
|
|
|
|
info->fix.ywrapstep = 0;
|
|
|
|
info->fix.type_aux = 0;
|
|
|
|
info->fix.accel = FB_ACCEL_NONE;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static void control_cleanup(void)
|
|
|
|
{
|
|
|
|
struct fb_info_control *p = control_fb;
|
|
|
|
|
|
|
|
if (!p)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (p->cmap_regs)
|
|
|
|
iounmap(p->cmap_regs);
|
|
|
|
if (p->control_regs)
|
|
|
|
iounmap(p->control_regs);
|
|
|
|
if (p->frame_buffer) {
|
|
|
|
if (p->control_use_bank2)
|
|
|
|
p->frame_buffer -= 0x600000;
|
|
|
|
iounmap(p->frame_buffer);
|
|
|
|
}
|
|
|
|
if (p->cmap_regs_phys)
|
|
|
|
release_mem_region(p->cmap_regs_phys, 0x1000);
|
|
|
|
if (p->control_regs_phys)
|
|
|
|
release_mem_region(p->control_regs_phys, p->control_regs_size);
|
|
|
|
if (p->fb_orig_base)
|
|
|
|
release_mem_region(p->fb_orig_base, p->fb_orig_size);
|
|
|
|
kfree(p);
|
|
|
|
}
|
|
|
|
|
|
|
|
|