OpenCloudOS-Kernel/drivers/scsi/gdth.h

982 lines
44 KiB
C
Raw Permalink Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _GDTH_H
#define _GDTH_H
/*
* Header file for the GDT Disk Array/Storage RAID controllers driver for Linux
*
* gdth.h Copyright (C) 1995-06 ICP vortex, Achim Leubner
* See gdth.c for further informations and
* below for supported controller types
*
* <achim_leubner@adaptec.com>
*
* $Id: gdth.h,v 1.58 2006/01/11 16:14:09 achim Exp $
*/
#include <linux/types.h>
#ifndef TRUE
#define TRUE 1
#endif
#ifndef FALSE
#define FALSE 0
#endif
/* defines, macros */
/* driver version */
#define GDTH_VERSION_STR "3.05"
#define GDTH_VERSION 3
#define GDTH_SUBVERSION 5
/* protocol version */
#define PROTOCOL_VERSION 1
/* OEM IDs */
#define OEM_ID_ICP 0x941c
#define OEM_ID_INTEL 0x8000
/* controller classes */
#define GDT_PCI 0x03 /* PCI controller */
#define GDT_PCINEW 0x04 /* new PCI controller */
#define GDT_PCIMPR 0x05 /* PCI MPR controller */
#ifndef PCI_DEVICE_ID_VORTEX_GDT60x0
/* GDT_PCI */
#define PCI_DEVICE_ID_VORTEX_GDT60x0 0 /* GDT6000/6020/6050 */
#define PCI_DEVICE_ID_VORTEX_GDT6000B 1 /* GDT6000B/6010 */
/* GDT_PCINEW */
#define PCI_DEVICE_ID_VORTEX_GDT6x10 2 /* GDT6110/6510 */
#define PCI_DEVICE_ID_VORTEX_GDT6x20 3 /* GDT6120/6520 */
#define PCI_DEVICE_ID_VORTEX_GDT6530 4 /* GDT6530 */
#define PCI_DEVICE_ID_VORTEX_GDT6550 5 /* GDT6550 */
/* GDT_PCINEW, wide/ultra SCSI controllers */
#define PCI_DEVICE_ID_VORTEX_GDT6x17 6 /* GDT6117/6517 */
#define PCI_DEVICE_ID_VORTEX_GDT6x27 7 /* GDT6127/6527 */
#define PCI_DEVICE_ID_VORTEX_GDT6537 8 /* GDT6537 */
#define PCI_DEVICE_ID_VORTEX_GDT6557 9 /* GDT6557/6557-ECC */
/* GDT_PCINEW, wide SCSI controllers */
#define PCI_DEVICE_ID_VORTEX_GDT6x15 10 /* GDT6115/6515 */
#define PCI_DEVICE_ID_VORTEX_GDT6x25 11 /* GDT6125/6525 */
#define PCI_DEVICE_ID_VORTEX_GDT6535 12 /* GDT6535 */
#define PCI_DEVICE_ID_VORTEX_GDT6555 13 /* GDT6555/6555-ECC */
#endif
#ifndef PCI_DEVICE_ID_VORTEX_GDT6x17RP
/* GDT_MPR, RP series, wide/ultra SCSI */
#define PCI_DEVICE_ID_VORTEX_GDT6x17RP 0x100 /* GDT6117RP/GDT6517RP */
#define PCI_DEVICE_ID_VORTEX_GDT6x27RP 0x101 /* GDT6127RP/GDT6527RP */
#define PCI_DEVICE_ID_VORTEX_GDT6537RP 0x102 /* GDT6537RP */
#define PCI_DEVICE_ID_VORTEX_GDT6557RP 0x103 /* GDT6557RP */
/* GDT_MPR, RP series, narrow/ultra SCSI */
#define PCI_DEVICE_ID_VORTEX_GDT6x11RP 0x104 /* GDT6111RP/GDT6511RP */
#define PCI_DEVICE_ID_VORTEX_GDT6x21RP 0x105 /* GDT6121RP/GDT6521RP */
#endif
#ifndef PCI_DEVICE_ID_VORTEX_GDT6x17RD
/* GDT_MPR, RD series, wide/ultra SCSI */
#define PCI_DEVICE_ID_VORTEX_GDT6x17RD 0x110 /* GDT6117RD/GDT6517RD */
#define PCI_DEVICE_ID_VORTEX_GDT6x27RD 0x111 /* GDT6127RD/GDT6527RD */
#define PCI_DEVICE_ID_VORTEX_GDT6537RD 0x112 /* GDT6537RD */
#define PCI_DEVICE_ID_VORTEX_GDT6557RD 0x113 /* GDT6557RD */
/* GDT_MPR, RD series, narrow/ultra SCSI */
#define PCI_DEVICE_ID_VORTEX_GDT6x11RD 0x114 /* GDT6111RD/GDT6511RD */
#define PCI_DEVICE_ID_VORTEX_GDT6x21RD 0x115 /* GDT6121RD/GDT6521RD */
/* GDT_MPR, RD series, wide/ultra2 SCSI */
#define PCI_DEVICE_ID_VORTEX_GDT6x18RD 0x118 /* GDT6118RD/GDT6518RD/
GDT6618RD */
#define PCI_DEVICE_ID_VORTEX_GDT6x28RD 0x119 /* GDT6128RD/GDT6528RD/
GDT6628RD */
#define PCI_DEVICE_ID_VORTEX_GDT6x38RD 0x11A /* GDT6538RD/GDT6638RD */
#define PCI_DEVICE_ID_VORTEX_GDT6x58RD 0x11B /* GDT6558RD/GDT6658RD */
/* GDT_MPR, RN series (64-bit PCI), wide/ultra2 SCSI */
#define PCI_DEVICE_ID_VORTEX_GDT7x18RN 0x168 /* GDT7118RN/GDT7518RN/
GDT7618RN */
#define PCI_DEVICE_ID_VORTEX_GDT7x28RN 0x169 /* GDT7128RN/GDT7528RN/
GDT7628RN */
#define PCI_DEVICE_ID_VORTEX_GDT7x38RN 0x16A /* GDT7538RN/GDT7638RN */
#define PCI_DEVICE_ID_VORTEX_GDT7x58RN 0x16B /* GDT7558RN/GDT7658RN */
#endif
#ifndef PCI_DEVICE_ID_VORTEX_GDT6x19RD
/* GDT_MPR, RD series, Fibre Channel */
#define PCI_DEVICE_ID_VORTEX_GDT6x19RD 0x210 /* GDT6519RD/GDT6619RD */
#define PCI_DEVICE_ID_VORTEX_GDT6x29RD 0x211 /* GDT6529RD/GDT6629RD */
/* GDT_MPR, RN series (64-bit PCI), Fibre Channel */
#define PCI_DEVICE_ID_VORTEX_GDT7x19RN 0x260 /* GDT7519RN/GDT7619RN */
#define PCI_DEVICE_ID_VORTEX_GDT7x29RN 0x261 /* GDT7529RN/GDT7629RN */
#endif
#ifndef PCI_DEVICE_ID_VORTEX_GDTMAXRP
/* GDT_MPR, last device ID */
#define PCI_DEVICE_ID_VORTEX_GDTMAXRP 0x2ff
#endif
#ifndef PCI_DEVICE_ID_VORTEX_GDTNEWRX
/* new GDT Rx Controller */
#define PCI_DEVICE_ID_VORTEX_GDTNEWRX 0x300
#endif
#ifndef PCI_DEVICE_ID_VORTEX_GDTNEWRX2
/* new(2) GDT Rx Controller */
#define PCI_DEVICE_ID_VORTEX_GDTNEWRX2 0x301
#endif
#ifndef PCI_DEVICE_ID_INTEL_SRC
/* Intel Storage RAID Controller */
#define PCI_DEVICE_ID_INTEL_SRC 0x600
#endif
#ifndef PCI_DEVICE_ID_INTEL_SRC_XSCALE
/* Intel Storage RAID Controller */
#define PCI_DEVICE_ID_INTEL_SRC_XSCALE 0x601
#endif
/* limits */
#define GDTH_SCRATCH PAGE_SIZE /* 4KB scratch buffer */
#define GDTH_MAXCMDS 120
#define GDTH_MAXC_P_L 16 /* max. cmds per lun */
#define GDTH_MAX_RAW 2 /* max. cmds per raw device */
#define MAXOFFSETS 128
#define MAXHA 16
#define MAXID 127
#define MAXLUN 8
#define MAXBUS 6
#define MAX_EVENTS 100 /* event buffer count */
#define MAX_RES_ARGS 40 /* device reservation,
must be a multiple of 4 */
#define MAXCYLS 1024
#define HEADS 64
#define SECS 32 /* mapping 64*32 */
#define MEDHEADS 127
#define MEDSECS 63 /* mapping 127*63 */
#define BIGHEADS 255
#define BIGSECS 63 /* mapping 255*63 */
/* special command ptr. */
#define UNUSED_CMND ((struct scsi_cmnd *)-1)
#define INTERNAL_CMND ((struct scsi_cmnd *)-2)
#define SCREEN_CMND ((struct scsi_cmnd *)-3)
#define SPECIAL_SCP(p) (p==UNUSED_CMND || p==INTERNAL_CMND || p==SCREEN_CMND)
/* controller services */
#define SCSIRAWSERVICE 3
#define CACHESERVICE 9
#define SCREENSERVICE 11
/* screenservice defines */
#define MSG_INV_HANDLE -1 /* special message handle */
#define MSGLEN 16 /* size of message text */
#define MSG_SIZE 34 /* size of message structure */
#define MSG_REQUEST 0 /* async. event: message */
/* DPMEM constants */
#define DPMEM_MAGIC 0xC0FFEE11
#define IC_HEADER_BYTES 48
#define IC_QUEUE_BYTES 4
#define DPMEM_COMMAND_OFFSET IC_HEADER_BYTES+IC_QUEUE_BYTES*MAXOFFSETS
/* cluster_type constants */
#define CLUSTER_DRIVE 1
#define CLUSTER_MOUNTED 2
#define CLUSTER_RESERVED 4
#define CLUSTER_RESERVE_STATE (CLUSTER_DRIVE|CLUSTER_MOUNTED|CLUSTER_RESERVED)
/* commands for all services, cache service */
#define GDT_INIT 0 /* service initialization */
#define GDT_READ 1 /* read command */
#define GDT_WRITE 2 /* write command */
#define GDT_INFO 3 /* information about devices */
#define GDT_FLUSH 4 /* flush dirty cache buffers */
#define GDT_IOCTL 5 /* ioctl command */
#define GDT_DEVTYPE 9 /* additional information */
#define GDT_MOUNT 10 /* mount cache device */
#define GDT_UNMOUNT 11 /* unmount cache device */
#define GDT_SET_FEAT 12 /* set feat. (scatter/gather) */
#define GDT_GET_FEAT 13 /* get features */
#define GDT_WRITE_THR 16 /* write through */
#define GDT_READ_THR 17 /* read through */
#define GDT_EXT_INFO 18 /* extended info */
#define GDT_RESET 19 /* controller reset */
#define GDT_RESERVE_DRV 20 /* reserve host drive */
#define GDT_RELEASE_DRV 21 /* release host drive */
#define GDT_CLUST_INFO 22 /* cluster info */
#define GDT_RW_ATTRIBS 23 /* R/W attribs (write thru,..)*/
#define GDT_CLUST_RESET 24 /* releases the cluster drives*/
#define GDT_FREEZE_IO 25 /* freezes all IOs */
#define GDT_UNFREEZE_IO 26 /* unfreezes all IOs */
#define GDT_X_INIT_HOST 29 /* ext. init: 64 bit support */
#define GDT_X_INFO 30 /* ext. info for drives>2TB */
/* raw service commands */
#define GDT_RESERVE 14 /* reserve dev. to raw serv. */
#define GDT_RELEASE 15 /* release device */
#define GDT_RESERVE_ALL 16 /* reserve all devices */
#define GDT_RELEASE_ALL 17 /* release all devices */
#define GDT_RESET_BUS 18 /* reset bus */
#define GDT_SCAN_START 19 /* start device scan */
#define GDT_SCAN_END 20 /* stop device scan */
#define GDT_X_INIT_RAW 21 /* ext. init: 64 bit support */
/* screen service commands */
#define GDT_REALTIME 3 /* realtime clock to screens. */
#define GDT_X_INIT_SCR 4 /* ext. init: 64 bit support */
/* IOCTL command defines */
#define SCSI_DR_INFO 0x00 /* SCSI drive info */
#define SCSI_CHAN_CNT 0x05 /* SCSI channel count */
#define SCSI_DR_LIST 0x06 /* SCSI drive list */
#define SCSI_DEF_CNT 0x15 /* grown/primary defects */
#define DSK_STATISTICS 0x4b /* SCSI disk statistics */
#define IOCHAN_DESC 0x5d /* description of IO channel */
#define IOCHAN_RAW_DESC 0x5e /* description of raw IO chn. */
#define L_CTRL_PATTERN 0x20000000L /* SCSI IOCTL mask */
#define ARRAY_INFO 0x12 /* array drive info */
#define ARRAY_DRV_LIST 0x0f /* array drive list */
#define ARRAY_DRV_LIST2 0x34 /* array drive list (new) */
#define LA_CTRL_PATTERN 0x10000000L /* array IOCTL mask */
#define CACHE_DRV_CNT 0x01 /* cache drive count */
#define CACHE_DRV_LIST 0x02 /* cache drive list */
#define CACHE_INFO 0x04 /* cache info */
#define CACHE_CONFIG 0x05 /* cache configuration */
#define CACHE_DRV_INFO 0x07 /* cache drive info */
#define BOARD_FEATURES 0x15 /* controller features */
#define BOARD_INFO 0x28 /* controller info */
#define SET_PERF_MODES 0x82 /* set mode (coalescing,..) */
#define GET_PERF_MODES 0x83 /* get mode */
#define CACHE_READ_OEM_STRING_RECORD 0x84 /* read OEM string record */
#define HOST_GET 0x10001L /* get host drive list */
#define IO_CHANNEL 0x00020000L /* default IO channel */
#define INVALID_CHANNEL 0x0000ffffL /* invalid channel */
/* service errors */
#define S_OK 1 /* no error */
#define S_GENERR 6 /* general error */
#define S_BSY 7 /* controller busy */
#define S_CACHE_UNKNOWN 12 /* cache serv.: drive unknown */
#define S_RAW_SCSI 12 /* raw serv.: target error */
#define S_RAW_ILL 0xff /* raw serv.: illegal */
#define S_NOFUNC -2 /* unknown function */
#define S_CACHE_RESERV -24 /* cache: reserv. conflict */
/* timeout values */
#define INIT_RETRIES 100000 /* 100000 * 1ms = 100s */
#define INIT_TIMEOUT 100000 /* 100000 * 1ms = 100s */
#define POLL_TIMEOUT 10000 /* 10000 * 1ms = 10s */
/* priorities */
#define DEFAULT_PRI 0x20
#define IOCTL_PRI 0x10
#define HIGH_PRI 0x08
/* data directions */
#define GDTH_DATA_IN 0x01000000L /* data from target */
#define GDTH_DATA_OUT 0x00000000L /* data to target */
/* other defines */
#define LINUX_OS 8 /* used for cache optim. */
#define SECS32 0x1f /* round capacity */
#define BIOS_ID_OFFS 0x10 /* offset contr-ID in ISABIOS */
#define LOCALBOARD 0 /* board node always 0 */
#define ASYNCINDEX 0 /* cmd index async. event */
#define SPEZINDEX 1 /* cmd index unknown service */
#define COALINDEX (GDTH_MAXCMDS + 2)
/* features */
#define SCATTER_GATHER 1 /* s/g feature */
#define GDT_WR_THROUGH 0x100 /* WRITE_THROUGH supported */
#define GDT_64BIT 0x200 /* 64bit / drv>2TB support */
#include "gdth_ioctl.h"
/* screenservice message */
typedef struct {
u32 msg_handle; /* message handle */
u32 msg_len; /* size of message */
u32 msg_alen; /* answer length */
u8 msg_answer; /* answer flag */
u8 msg_ext; /* more messages */
u8 msg_reserved[2];
char msg_text[MSGLEN+2]; /* the message text */
} __attribute__((packed)) gdth_msg_str;
/* IOCTL data structures */
/* Status coalescing buffer for returning multiple requests per interrupt */
typedef struct {
u32 status;
u32 ext_status;
u32 info0;
u32 info1;
} __attribute__((packed)) gdth_coal_status;
/* performance mode data structure */
typedef struct {
u32 version; /* The version of this IOCTL structure. */
u32 st_mode; /* 0=dis., 1=st_buf_addr1 valid, 2=both */
u32 st_buff_addr1; /* physical address of status buffer 1 */
u32 st_buff_u_addr1; /* reserved for 64 bit addressing */
u32 st_buff_indx1; /* reserved command idx. for this buffer */
u32 st_buff_addr2; /* physical address of status buffer 1 */
u32 st_buff_u_addr2; /* reserved for 64 bit addressing */
u32 st_buff_indx2; /* reserved command idx. for this buffer */
u32 st_buff_size; /* size of each buffer in bytes */
u32 cmd_mode; /* 0 = mode disabled, 1 = cmd_buff_addr1 */
u32 cmd_buff_addr1; /* physical address of cmd buffer 1 */
u32 cmd_buff_u_addr1; /* reserved for 64 bit addressing */
u32 cmd_buff_indx1; /* cmd buf addr1 unique identifier */
u32 cmd_buff_addr2; /* physical address of cmd buffer 1 */
u32 cmd_buff_u_addr2; /* reserved for 64 bit addressing */
u32 cmd_buff_indx2; /* cmd buf addr1 unique identifier */
u32 cmd_buff_size; /* size of each cmd buffer in bytes */
u32 reserved1;
u32 reserved2;
} __attribute__((packed)) gdth_perf_modes;
/* SCSI drive info */
typedef struct {
u8 vendor[8]; /* vendor string */
u8 product[16]; /* product string */
u8 revision[4]; /* revision */
u32 sy_rate; /* current rate for sync. tr. */
u32 sy_max_rate; /* max. rate for sync. tr. */
u32 no_ldrive; /* belongs to this log. drv.*/
u32 blkcnt; /* number of blocks */
u16 blksize; /* size of block in bytes */
u8 available; /* flag: access is available */
u8 init; /* medium is initialized */
u8 devtype; /* SCSI devicetype */
u8 rm_medium; /* medium is removable */
u8 wp_medium; /* medium is write protected */
u8 ansi; /* SCSI I/II or III? */
u8 protocol; /* same as ansi */
u8 sync; /* flag: sync. transfer enab. */
u8 disc; /* flag: disconnect enabled */
u8 queueing; /* flag: command queing enab. */
u8 cached; /* flag: caching enabled */
u8 target_id; /* target ID of device */
u8 lun; /* LUN id of device */
u8 orphan; /* flag: drive fragment */
u32 last_error; /* sense key or drive state */
u32 last_result; /* result of last command */
u32 check_errors; /* err. in last surface check */
u8 percent; /* progress for surface check */
u8 last_check; /* IOCTRL operation */
u8 res[2];
u32 flags; /* from 1.19/2.19: raw reserv.*/
u8 multi_bus; /* multi bus dev? (fibre ch.) */
u8 mb_status; /* status: available? */
u8 res2[2];
u8 mb_alt_status; /* status on second bus */
u8 mb_alt_bid; /* number of second bus */
u8 mb_alt_tid; /* target id on second bus */
u8 res3;
u8 fc_flag; /* from 1.22/2.22: info valid?*/
u8 res4;
u16 fc_frame_size; /* frame size (bytes) */
char wwn[8]; /* world wide name */
} __attribute__((packed)) gdth_diskinfo_str;
/* get SCSI channel count */
typedef struct {
u32 channel_no; /* number of channel */
u32 drive_cnt; /* drive count */
u8 siop_id; /* SCSI processor ID */
u8 siop_state; /* SCSI processor state */
} __attribute__((packed)) gdth_getch_str;
/* get SCSI drive numbers */
typedef struct {
u32 sc_no; /* SCSI channel */
u32 sc_cnt; /* sc_list[] elements */
u32 sc_list[MAXID]; /* minor device numbers */
} __attribute__((packed)) gdth_drlist_str;
/* get grown/primary defect count */
typedef struct {
u8 sddc_type; /* 0x08: grown, 0x10: prim. */
u8 sddc_format; /* list entry format */
u8 sddc_len; /* list entry length */
u8 sddc_res;
u32 sddc_cnt; /* entry count */
} __attribute__((packed)) gdth_defcnt_str;
/* disk statistics */
typedef struct {
u32 bid; /* SCSI channel */
u32 first; /* first SCSI disk */
u32 entries; /* number of elements */
u32 count; /* (R) number of init. el. */
u32 mon_time; /* time stamp */
struct {
u8 tid; /* target ID */
u8 lun; /* LUN */
u8 res[2];
u32 blk_size; /* block size in bytes */
u32 rd_count; /* bytes read */
u32 wr_count; /* bytes written */
u32 rd_blk_count; /* blocks read */
u32 wr_blk_count; /* blocks written */
u32 retries; /* retries */
u32 reassigns; /* reassigns */
} __attribute__((packed)) list[1];
} __attribute__((packed)) gdth_dskstat_str;
/* IO channel header */
typedef struct {
u32 version; /* version (-1UL: newest) */
u8 list_entries; /* list entry count */
u8 first_chan; /* first channel number */
u8 last_chan; /* last channel number */
u8 chan_count; /* (R) channel count */
u32 list_offset; /* offset of list[0] */
} __attribute__((packed)) gdth_iochan_header;
/* get IO channel description */
typedef struct {
gdth_iochan_header hdr;
struct {
u32 address; /* channel address */
u8 type; /* type (SCSI, FCAL) */
u8 local_no; /* local number */
u16 features; /* channel features */
} __attribute__((packed)) list[MAXBUS];
} __attribute__((packed)) gdth_iochan_str;
/* get raw IO channel description */
typedef struct {
gdth_iochan_header hdr;
struct {
u8 proc_id; /* processor id */
u8 proc_defect; /* defect ? */
u8 reserved[2];
} __attribute__((packed)) list[MAXBUS];
} __attribute__((packed)) gdth_raw_iochan_str;
/* array drive component */
typedef struct {
u32 al_controller; /* controller ID */
u8 al_cache_drive; /* cache drive number */
u8 al_status; /* cache drive state */
u8 al_res[2];
} __attribute__((packed)) gdth_arraycomp_str;
/* array drive information */
typedef struct {
u8 ai_type; /* array type (RAID0,4,5) */
u8 ai_cache_drive_cnt; /* active cachedrives */
u8 ai_state; /* array drive state */
u8 ai_master_cd; /* master cachedrive */
u32 ai_master_controller; /* ID of master controller */
u32 ai_size; /* user capacity [sectors] */
u32 ai_striping_size; /* striping size [sectors] */
u32 ai_secsize; /* sector size [bytes] */
u32 ai_err_info; /* failed cache drive */
u8 ai_name[8]; /* name of the array drive */
u8 ai_controller_cnt; /* number of controllers */
u8 ai_removable; /* flag: removable */
u8 ai_write_protected; /* flag: write protected */
u8 ai_devtype; /* type: always direct access */
gdth_arraycomp_str ai_drives[35]; /* drive components: */
u8 ai_drive_entries; /* number of drive components */
u8 ai_protected; /* protection flag */
u8 ai_verify_state; /* state of a parity verify */
u8 ai_ext_state; /* extended array drive state */
u8 ai_expand_state; /* array expand state (>=2.18)*/
u8 ai_reserved[3];
} __attribute__((packed)) gdth_arrayinf_str;
/* get array drive list */
typedef struct {
u32 controller_no; /* controller no. */
u8 cd_handle; /* master cachedrive */
u8 is_arrayd; /* Flag: is array drive? */
u8 is_master; /* Flag: is array master? */
u8 is_parity; /* Flag: is parity drive? */
u8 is_hotfix; /* Flag: is hotfix drive? */
u8 res[3];
} __attribute__((packed)) gdth_alist_str;
typedef struct {
u32 entries_avail; /* allocated entries */
u32 entries_init; /* returned entries */
u32 first_entry; /* first entry number */
u32 list_offset; /* offset of following list */
gdth_alist_str list[1]; /* list */
} __attribute__((packed)) gdth_arcdl_str;
/* cache info/config IOCTL */
typedef struct {
u32 version; /* firmware version */
u16 state; /* cache state (on/off) */
u16 strategy; /* cache strategy */
u16 write_back; /* write back state (on/off) */
u16 block_size; /* cache block size */
} __attribute__((packed)) gdth_cpar_str;
typedef struct {
u32 csize; /* cache size */
u32 read_cnt; /* read/write counter */
u32 write_cnt;
u32 tr_hits; /* hits */
u32 sec_hits;
u32 sec_miss; /* misses */
} __attribute__((packed)) gdth_cstat_str;
typedef struct {
gdth_cpar_str cpar;
gdth_cstat_str cstat;
} __attribute__((packed)) gdth_cinfo_str;
/* cache drive info */
typedef struct {
u8 cd_name[8]; /* cache drive name */
u32 cd_devtype; /* SCSI devicetype */
u32 cd_ldcnt; /* number of log. drives */
u32 cd_last_error; /* last error */
u8 cd_initialized; /* drive is initialized */
u8 cd_removable; /* media is removable */
u8 cd_write_protected; /* write protected */
u8 cd_flags; /* Pool Hot Fix? */
u32 ld_blkcnt; /* number of blocks */
u32 ld_blksize; /* blocksize */
u32 ld_dcnt; /* number of disks */
u32 ld_slave; /* log. drive index */
u32 ld_dtype; /* type of logical drive */
u32 ld_last_error; /* last error */
u8 ld_name[8]; /* log. drive name */
u8 ld_error; /* error */
} __attribute__((packed)) gdth_cdrinfo_str;
/* OEM string */
typedef struct {
u32 ctl_version;
u32 file_major_version;
u32 file_minor_version;
u32 buffer_size;
u32 cpy_count;
u32 ext_error;
u32 oem_id;
u32 board_id;
} __attribute__((packed)) gdth_oem_str_params;
typedef struct {
u8 product_0_1_name[16];
u8 product_4_5_name[16];
u8 product_cluster_name[16];
u8 product_reserved[16];
u8 scsi_cluster_target_vendor_id[16];
u8 cluster_raid_fw_name[16];
u8 oem_brand_name[16];
u8 oem_raid_type[16];
u8 bios_type[13];
u8 bios_title[50];
u8 oem_company_name[37];
u32 pci_id_1;
u32 pci_id_2;
u8 validation_status[80];
u8 reserved_1[4];
u8 scsi_host_drive_inquiry_vendor_id[16];
u8 library_file_template[16];
u8 reserved_2[16];
u8 tool_name_1[32];
u8 tool_name_2[32];
u8 tool_name_3[32];
u8 oem_contact_1[84];
u8 oem_contact_2[84];
u8 oem_contact_3[84];
} __attribute__((packed)) gdth_oem_str;
typedef struct {
gdth_oem_str_params params;
gdth_oem_str text;
} __attribute__((packed)) gdth_oem_str_ioctl;
/* board features */
typedef struct {
u8 chaining; /* Chaining supported */
u8 striping; /* Striping (RAID-0) supp. */
u8 mirroring; /* Mirroring (RAID-1) supp. */
u8 raid; /* RAID-4/5/10 supported */
} __attribute__((packed)) gdth_bfeat_str;
/* board info IOCTL */
typedef struct {
u32 ser_no; /* serial no. */
u8 oem_id[2]; /* OEM ID */
u16 ep_flags; /* eprom flags */
u32 proc_id; /* processor ID */
u32 memsize; /* memory size (bytes) */
u8 mem_banks; /* memory banks */
u8 chan_type; /* channel type */
u8 chan_count; /* channel count */
u8 rdongle_pres; /* dongle present? */
u32 epr_fw_ver; /* (eprom) firmware version */
u32 upd_fw_ver; /* (update) firmware version */
u32 upd_revision; /* update revision */
char type_string[16]; /* controller name */
char raid_string[16]; /* RAID firmware name */
u8 update_pres; /* update present? */
u8 xor_pres; /* XOR engine present? */
u8 prom_type; /* ROM type (eprom/flash) */
u8 prom_count; /* number of ROM devices */
u32 dup_pres; /* duplexing module present? */
u32 chan_pres; /* number of expansion chn. */
u32 mem_pres; /* memory expansion inst. ? */
u8 ft_bus_system; /* fault bus supported? */
u8 subtype_valid; /* board_subtype valid? */
u8 board_subtype; /* subtype/hardware level */
u8 ramparity_pres; /* RAM parity check hardware? */
} __attribute__((packed)) gdth_binfo_str;
/* get host drive info */
typedef struct {
char name[8]; /* host drive name */
u32 size; /* size (sectors) */
u8 host_drive; /* host drive number */
u8 log_drive; /* log. drive (master) */
u8 reserved;
u8 rw_attribs; /* r/w attribs */
u32 start_sec; /* start sector */
} __attribute__((packed)) gdth_hentry_str;
typedef struct {
u32 entries; /* entry count */
u32 offset; /* offset of entries */
u8 secs_p_head; /* sectors/head */
u8 heads_p_cyl; /* heads/cylinder */
u8 reserved;
u8 clust_drvtype; /* cluster drive type */
u32 location; /* controller number */
gdth_hentry_str entry[MAX_HDRIVES]; /* entries */
} __attribute__((packed)) gdth_hget_str;
/* DPRAM structures */
/* interface area ISA/PCI */
typedef struct {
u8 S_Cmd_Indx; /* special command */
u8 volatile S_Status; /* status special command */
u16 reserved1;
u32 S_Info[4]; /* add. info special command */
u8 volatile Sema0; /* command semaphore */
u8 reserved2[3];
u8 Cmd_Index; /* command number */
u8 reserved3[3];
u16 volatile Status; /* command status */
u16 Service; /* service(for async.events) */
u32 Info[2]; /* additional info */
struct {
u16 offset; /* command offs. in the DPRAM*/
u16 serv_id; /* service */
} __attribute__((packed)) comm_queue[MAXOFFSETS]; /* command queue */
u32 bios_reserved[2];
u8 gdt_dpr_cmd[1]; /* commands */
} __attribute__((packed)) gdt_dpr_if;
/* SRAM structure PCI controllers */
typedef struct {
u32 magic; /* controller ID from BIOS */
u16 need_deinit; /* switch betw. BIOS/driver */
u8 switch_support; /* see need_deinit */
u8 padding[9];
u8 os_used[16]; /* OS code per service */
u8 unused[28];
u8 fw_magic; /* contr. ID from firmware */
} __attribute__((packed)) gdt_pci_sram;
/* DPRAM ISA controllers */
typedef struct {
union {
struct {
u8 bios_used[0x3c00-32]; /* 15KB - 32Bytes BIOS */
u16 need_deinit; /* switch betw. BIOS/driver */
u8 switch_support; /* see need_deinit */
u8 padding[9];
u8 os_used[16]; /* OS code per service */
} __attribute__((packed)) dp_sram;
u8 bios_area[0x4000]; /* 16KB reserved for BIOS */
} bu;
union {
gdt_dpr_if ic; /* interface area */
u8 if_area[0x3000]; /* 12KB for interface */
} u;
struct {
u8 memlock; /* write protection DPRAM */
u8 event; /* release event */
u8 irqen; /* board interrupts enable */
u8 irqdel; /* acknowledge board int. */
u8 volatile Sema1; /* status semaphore */
u8 rq; /* IRQ/DRQ configuration */
} __attribute__((packed)) io;
} __attribute__((packed)) gdt2_dpram_str;
/* DPRAM PCI controllers */
typedef struct {
union {
gdt_dpr_if ic; /* interface area */
u8 if_area[0xff0-sizeof(gdt_pci_sram)];
} u;
gdt_pci_sram gdt6sr; /* SRAM structure */
struct {
u8 unused0[1];
u8 volatile Sema1; /* command semaphore */
u8 unused1[3];
u8 irqen; /* board interrupts enable */
u8 unused2[2];
u8 event; /* release event */
u8 unused3[3];
u8 irqdel; /* acknowledge board int. */
u8 unused4[3];
} __attribute__((packed)) io;
} __attribute__((packed)) gdt6_dpram_str;
/* PLX register structure (new PCI controllers) */
typedef struct {
u8 cfg_reg; /* DPRAM cfg.(2:below 1MB,0:anywhere)*/
u8 unused1[0x3f];
u8 volatile sema0_reg; /* command semaphore */
u8 volatile sema1_reg; /* status semaphore */
u8 unused2[2];
u16 volatile status; /* command status */
u16 service; /* service */
u32 info[2]; /* additional info */
u8 unused3[0x10];
u8 ldoor_reg; /* PCI to local doorbell */
u8 unused4[3];
u8 volatile edoor_reg; /* local to PCI doorbell */
u8 unused5[3];
u8 control0; /* control0 register(unused) */
u8 control1; /* board interrupts enable */
u8 unused6[0x16];
} __attribute__((packed)) gdt6c_plx_regs;
/* DPRAM new PCI controllers */
typedef struct {
union {
gdt_dpr_if ic; /* interface area */
u8 if_area[0x4000-sizeof(gdt_pci_sram)];
} u;
gdt_pci_sram gdt6sr; /* SRAM structure */
} __attribute__((packed)) gdt6c_dpram_str;
/* i960 register structure (PCI MPR controllers) */
typedef struct {
u8 unused1[16];
u8 volatile sema0_reg; /* command semaphore */
u8 unused2;
u8 volatile sema1_reg; /* status semaphore */
u8 unused3;
u16 volatile status; /* command status */
u16 service; /* service */
u32 info[2]; /* additional info */
u8 ldoor_reg; /* PCI to local doorbell */
u8 unused4[11];
u8 volatile edoor_reg; /* local to PCI doorbell */
u8 unused5[7];
u8 edoor_en_reg; /* board interrupts enable */
u8 unused6[27];
u32 unused7[939];
u32 severity;
char evt_str[256]; /* event string */
} __attribute__((packed)) gdt6m_i960_regs;
/* DPRAM PCI MPR controllers */
typedef struct {
gdt6m_i960_regs i960r; /* 4KB i960 registers */
union {
gdt_dpr_if ic; /* interface area */
u8 if_area[0x3000-sizeof(gdt_pci_sram)];
} u;
gdt_pci_sram gdt6sr; /* SRAM structure */
} __attribute__((packed)) gdt6m_dpram_str;
/* PCI resources */
typedef struct {
struct pci_dev *pdev;
unsigned long dpmem; /* DPRAM address */
unsigned long io; /* IO address */
} gdth_pci_str;
/* controller information structure */
typedef struct {
struct Scsi_Host *shost;
struct list_head list;
u16 hanum;
u16 oem_id; /* OEM */
u16 type; /* controller class */
u32 stype; /* subtype (PCI: device ID) */
u16 fw_vers; /* firmware version */
u16 cache_feat; /* feat. cache serv. (s/g,..)*/
u16 raw_feat; /* feat. raw service (s/g,..)*/
u16 screen_feat; /* feat. raw service (s/g,..)*/
void __iomem *brd; /* DPRAM address */
u32 brd_phys; /* slot number/BIOS address */
gdt6c_plx_regs *plx; /* PLX regs (new PCI contr.) */
gdth_cmd_str cmdext;
gdth_cmd_str *pccb; /* address command structure */
u32 ccb_phys; /* phys. address */
#ifdef INT_COAL
gdth_coal_status *coal_stat; /* buffer for coalescing int.*/
u64 coal_stat_phys; /* phys. address */
#endif
char *pscratch; /* scratch (DMA) buffer */
u64 scratch_phys; /* phys. address */
u8 scratch_busy; /* in use? */
u8 dma64_support; /* 64-bit DMA supported? */
gdth_msg_str *pmsg; /* message buffer */
u64 msg_phys; /* phys. address */
u8 scan_mode; /* current scan mode */
u8 irq; /* IRQ */
u8 drq; /* DRQ (ISA controllers) */
u16 status; /* command status */
u16 service; /* service/firmware ver./.. */
u32 info;
u32 info2; /* additional info */
struct scsi_cmnd *req_first; /* top of request queue */
struct {
u8 present; /* Flag: host drive present? */
u8 is_logdrv; /* Flag: log. drive (master)? */
u8 is_arraydrv; /* Flag: array drive? */
u8 is_master; /* Flag: array drive master? */
u8 is_parity; /* Flag: parity drive? */
u8 is_hotfix; /* Flag: hotfix drive? */
u8 master_no; /* number of master drive */
u8 lock; /* drive locked? (hot plug) */
u8 heads; /* mapping */
u8 secs;
u16 devtype; /* further information */
u64 size; /* capacity */
u8 ldr_no; /* log. drive no. */
u8 rw_attribs; /* r/w attributes */
u8 cluster_type; /* cluster properties */
u8 media_changed; /* Flag:MOUNT/UNMOUNT occurred */
u32 start_sec; /* start sector */
} hdr[MAX_LDRIVES]; /* host drives */
struct {
u8 lock; /* channel locked? (hot plug) */
u8 pdev_cnt; /* physical device count */
u8 local_no; /* local channel number */
u8 io_cnt[MAXID]; /* current IO count */
u32 address; /* channel address */
u32 id_list[MAXID]; /* IDs of the phys. devices */
} raw[MAXBUS]; /* SCSI channels */
struct {
struct scsi_cmnd *cmnd; /* pending request */
u16 service; /* service */
} cmd_tab[GDTH_MAXCMDS]; /* table of pend. requests */
struct gdth_cmndinfo { /* per-command private info */
int index;
int internal_command; /* don't call scsi_done */
gdth_cmd_str *internal_cmd_str; /* crier for internal messages*/
dma_addr_t sense_paddr; /* sense dma-addr */
u8 priority;
int timeout_count; /* # of timeout calls */
volatile int wait_for_completion;
u16 status;
u32 info;
enum dma_data_direction dma_dir;
int phase; /* ???? */
int OpCode;
} cmndinfo[GDTH_MAXCMDS]; /* index==0 is free */
u8 bus_cnt; /* SCSI bus count */
u8 tid_cnt; /* Target ID count */
u8 bus_id[MAXBUS]; /* IOP IDs */
u8 virt_bus; /* number of virtual bus */
u8 more_proc; /* more /proc info supported */
u16 cmd_cnt; /* command count in DPRAM */
u16 cmd_len; /* length of actual command */
u16 cmd_offs_dpmem; /* actual offset in DPRAM */
u16 ic_all_size; /* sizeof DPRAM interf. area */
gdth_cpar_str cpar; /* controller cache par. */
gdth_bfeat_str bfeat; /* controller features */
gdth_binfo_str binfo; /* controller info */
gdth_evt_data dvr; /* event structure */
spinlock_t smp_lock;
struct pci_dev *pdev;
char oem_name[8];
#ifdef GDTH_DMA_STATISTICS
unsigned long dma32_cnt, dma64_cnt; /* statistics: DMA buffer */
#endif
struct scsi_device *sdev;
} gdth_ha_str;
static inline struct gdth_cmndinfo *gdth_cmnd_priv(struct scsi_cmnd* cmd)
{
return (struct gdth_cmndinfo *)cmd->host_scribble;
}
/* INQUIRY data format */
typedef struct {
u8 type_qual;
u8 modif_rmb;
u8 version;
u8 resp_aenc;
u8 add_length;
u8 reserved1;
u8 reserved2;
u8 misc;
u8 vendor[8];
u8 product[16];
u8 revision[4];
} __attribute__((packed)) gdth_inq_data;
/* READ_CAPACITY data format */
typedef struct {
u32 last_block_no;
u32 block_length;
} __attribute__((packed)) gdth_rdcap_data;
/* READ_CAPACITY (16) data format */
typedef struct {
u64 last_block_no;
u32 block_length;
} __attribute__((packed)) gdth_rdcap16_data;
/* REQUEST_SENSE data format */
typedef struct {
u8 errorcode;
u8 segno;
u8 key;
u32 info;
u8 add_length;
u32 cmd_info;
u8 adsc;
u8 adsq;
u8 fruc;
u8 key_spec[3];
} __attribute__((packed)) gdth_sense_data;
/* MODE_SENSE data format */
typedef struct {
struct {
u8 data_length;
u8 med_type;
u8 dev_par;
u8 bd_length;
} __attribute__((packed)) hd;
struct {
u8 dens_code;
u8 block_count[3];
u8 reserved;
u8 block_length[3];
} __attribute__((packed)) bd;
} __attribute__((packed)) gdth_modep_data;
/* stack frame */
typedef struct {
unsigned long b[10]; /* 32/64 bit compiler ! */
} __attribute__((packed)) gdth_stackframe;
/* function prototyping */
int gdth_show_info(struct seq_file *, struct Scsi_Host *);
int gdth_set_info(struct Scsi_Host *, char *, int);
#endif