UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/ide/ide-cs.c

365 lines
12 KiB
C
Raw Permalink Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*======================================================================
A driver for PCMCIA IDE/ATA disk cards
The contents of this file are subject to the Mozilla Public
License Version 1.1 (the "License"); you may not use this file
except in compliance with the License. You may obtain a copy of
the License at http://www.mozilla.org/MPL/
Software distributed under the License is distributed on an "AS
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
implied. See the License for the specific language governing
rights and limitations under the License.
The initial developer of the original code is David A. Hinds
<dahinds@users.sourceforge.net>. Portions created by David A. Hinds
are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
Alternatively, the contents of this file may be used under the
terms of the GNU General Public License version 2 (the "GPL"), in
which case the provisions of the GPL are applicable instead of the
above. If you wish to allow the use of your version of this file
only under the terms of the GPL and not to allow others to use
your version of this file under the MPL, indicate your decision
by deleting the provisions above and replace them with the notice
and other provisions required by the GPL. If you do not delete
the provisions above, a recipient may use your version of this
file under either the MPL or the GPL.
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
======================================================================*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/ioport.h>
#include <linux/ide.h>
#include <linux/major.h>
[PATCH] janitor: ide/ide-cs: replace schedule_timeout() with msleep() Uses msleep() in place of schedule_timeout() to guarantee the task delays as expected. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by: Maximilian Attems <janitor@sternwelten.at> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 15:27:15 +08:00
#include <linux/delay.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
#include <asm/io.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/ds.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ciscode.h>
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
#define DRV_NAME "ide-cs"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/*====================================================================*/
/* Module parameters */
MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
MODULE_DESCRIPTION("PCMCIA ATA/IDE card driver");
MODULE_LICENSE("Dual MPL/GPL");
/*====================================================================*/
typedef struct ide_info_t {
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 17:45:09 +08:00
struct pcmcia_device *p_dev;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
struct ide_host *host;
pcmcia: dev_node removal (drivers with updated printk call) As a second step, remove any usage of dev_node_t from drivers which only wrote to this typedef/struct, except one printk() which can easily be replaced by a dev_info()/dev_warn() call. CC: Harald Welte <laforge@gnumonks.org> CC: linux-ide@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-usb@vger.kernel.org Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-21 02:35:12 +08:00
int ndev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} ide_info_t;
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:21:06 +08:00
static void ide_release(struct pcmcia_device *);
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
static int ide_config(struct pcmcia_device *);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:23:14 +08:00
static void ide_detach(struct pcmcia_device *p_dev);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
static int ide_probe(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ide_info_t *info;
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:25:51 +08:00
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide) ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG, so convert it to use the dynamic debug infrastructure. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-23 18:55:28 +08:00
dev_dbg(&link->dev, "ide_attach()\n");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* Create new ide device */
[PATCH] ide: kmalloc + memset -> kzalloc conversion Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07 17:01:25 +08:00
info = kzalloc(sizeof(*info), GFP_KERNEL);
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:25:51 +08:00
if (!info)
return -ENOMEM;
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 17:45:09 +08:00
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:21:06 +08:00
info->p_dev = link;
[PATCH] pcmcia: embed dev_link_t into struct pcmcia_device Embed dev_link_t into struct pcmcia_device(), as they basically address the same entity. The actual contents of dev_link_t will be cleaned up step by step. This patch includes a bugfix from and signed-off-by Andrew Morton. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-05 17:45:09 +08:00
link->priv = info;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 19:13:46 +08:00
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO |
CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC;
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:25:51 +08:00
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
return ide_config(link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* ide_attach */
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:21:06 +08:00
static void ide_detach(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
ide_info_t *info = link->priv;
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide) ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG, so convert it to use the dynamic debug infrastructure. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-23 18:55:28 +08:00
dev_dbg(&link->dev, "ide_detach(0x%p)\n", link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] pcmcia: use bitfield instead of p_state and state Instead of the two status values struct pcmcia_device->p_state and state, use descriptive bitfields. Most value-checking in drivers was invalid, as the core now only calls the ->remove() (a.k.a. detach) function in case the attachement _and_ configuration was successful. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-02 07:09:29 +08:00
ide_release(link);
[PATCH] pcmcia: remove dev_list from drivers The linked list of devices managed by each PCMCIA driver is, in very most cases, unused. Therefore, remove it from many drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:25:35 +08:00
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
kfree(info);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* ide_detach */
ide: add struct ide_port_ops (take 2) * Move hooks for port/host specific methods from ide_hwif_t to 'struct ide_port_ops'. * Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info' and ide_hwif_t. * Update host drivers and core code accordingly. While at it: * Rename ata66_*() cable detect functions to *_cable_detect() to match the standard naming. (Suggested by Sergei Shtylyov) v2: * Fix build for bast-ide. (Noticed by Andrew Morton) Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:14 +08:00
static const struct ide_port_ops idecs_port_ops = {
.quirkproc = ide_undecoded_slave,
};
ide-cs: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-17 02:33:40 +08:00
static const struct ide_port_info idecs_port_info = {
.port_ops = &idecs_port_ops,
.host_flags = IDE_HFLAG_NO_DMA,
ide: allow host drivers to specify IRQ flags * Add ->irq_flags field to struct ide_port_info and struct ide_host. * Update host drivers and IDE PCI code to use ->irq_flags field. * Convert init_irq() and ide_intr() to use host->irq_flags. This fixes handling of shared IRQs for non-PCI hosts and removes ugly ifdeffery from core IDE code. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-27 19:46:27 +08:00
.irq_flags = IRQF_SHARED,
ide: remove chipset field from hw_regs_t * Convert host drivers that still use hw_regs_t's chipset field to use the one in struct ide_port_info instead. * Move special handling of ide_pci chipset type from ide_hw_configure() to ide_init_port(). * Remove chipset field from hw_regs_t. While at it: - remove stale comment in delkin_cb.c There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-18 01:12:22 +08:00
.chipset = ide_pci,
ide-cs: use struct ide_port_info Convert the driver to use struct ide_port_info. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-17 02:33:40 +08:00
};
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
static struct ide_host *idecs_register(unsigned long io, unsigned long ctl,
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
unsigned long irq, struct pcmcia_device *handle)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
struct ide_host *host;
ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:39 +08:00
ide_hwif_t *hwif;
ide: add ide_host_add() helper Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(), then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some host drivers to use it. While at it: * Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c, macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value. * -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c and pmac.c * -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c * -1 -> -ENOMEM in ide-pnp.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
int i, rc;
ide: remove hw_regs_t typedef Remove hw_regs_t typedef and rename struct hw_regs_s to struct ide_hw. There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-18 01:12:25 +08:00
struct ide_hw hw, *hws[] = { &hw };
ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:39 +08:00
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
if (!request_region(io, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
DRV_NAME, io, io + 7);
return NULL;
}
if (!request_region(ctl, 1, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
DRV_NAME, ctl);
release_region(io, 8);
return NULL;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
memset(&hw, 0, sizeof(hw));
ide-cs: use ide_std_init_ports() No reason to use ide_init_hwif_ports() in ide-cs (as a nice side-effect this makes ide-cs work on archs that don't define IDE_ARCH_OBSOLETE_INIT). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:47 +08:00
ide_std_init_ports(&hw, io, ctl);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
hw.irq = irq;
[PATCH] ide: incorrect device link for ide-cs Devices driven by ide-cs will appear under /sys/devices instead of the appropriate PCMCIA device. To fix this I had to extend the hw_regs_t structure with a 'struct device' field, which allows us to set the parent link for the appropriate hwif. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Jens Axboe <axboe@suse.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2005-11-10 05:47:18 +08:00
hw.dev = &handle->dev;
ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:39 +08:00
ide: pass number of ports to ide_host_{alloc,add}() (v2) Pass number of ports to ide_host_{alloc,add}() and then update all users accordingly. v2: - drop no longer needed NULL initializers in buddha.c, cmd640.c and gayle.c (noticed by Sergei) There should be no functional changes caused by this patch. Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-05-18 01:12:24 +08:00
rc = ide_host_add(&idecs_port_info, hws, 1, &host);
ide: add ide_host_add() helper Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(), then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some host drivers to use it. While at it: * Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c, macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value. * -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c and pmac.c * -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c * -1 -> -ENOMEM in ide-pnp.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
if (rc)
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
goto out_release;
ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:39 +08:00
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
hwif = host->ports[0];
ide: add ide_deprecated_find_port() helper * Factor out code for finding ide_hwifs[] slot from ide_register_hw() to ide_deprecated_find_port(). * Convert bast-ide, ide-cs and delkin_cb host drivers to use ide_device_add() instead of ide_register_hw() (while at it drop doing "ide_unregister()" loop which tries to unregister _all_ IDE interfaces if useable ide_hwifs[] slot cannot be find). This patch leaves us with only two ide_register_hw() users: - drivers/macintosh/mediabay.c - drivers/ide/ide.c Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-03 02:56:39 +08:00
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
if (hwif->present)
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
return host;
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
ide-cs: fix probing and add warm-plug support * Fix probing by using ide_port_scan() and moving "retry loop" from ide_config() to idecs_register(). * Don't fail probe if there are no devices attached to a port. * Remove (now redundant) error message from ide_config(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-16 03:00:23 +08:00
/* retry registration in case device is still spinning up */
for (i = 0; i < 10; i++) {
msleep(100);
ide_port_scan(hwif);
if (hwif->present)
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
return host;
ide-cs: fix probing and add warm-plug support * Fix probing by using ide_port_scan() and moving "retry loop" from ide_config() to idecs_register(). * Don't fail probe if there are no devices attached to a port. * Remove (now redundant) error message from ide_config(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-16 03:00:23 +08:00
}
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
return host;
ide-cs: fix probing and add warm-plug support * Fix probing by using ide_port_scan() and moving "retry loop" from ide_config() to idecs_register(). * Don't fail probe if there are no devices attached to a port. * Remove (now redundant) error message from ide_config(). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-16 03:00:23 +08:00
ide-cs: manage I/O resources in driver * Make idecs_register() return pointer to hwif structure instead of hwif's index. * Store pointer to hwif structure instead of hwif's index in ide_info_t (fixes ide-cs for IDE[6-9]_MAJOR major numbers). * Remove no longer needed ide_major[]. * Tell IDE layer to not manage resources by setting hwif->mmio flag. * Use {request,release}_region() for resources management. * Use driver name for resources management. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-04-27 04:25:17 +08:00
out_release:
release_region(ctl, 1);
release_region(io, 8);
return NULL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 19:13:46 +08:00
static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
{
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 19:13:46 +08:00
int *is_kme = priv_data;
drivers/ide/ide-cs.c: adjust suspicious bit operation IO_DATA_PATH_WIDTH_8 is 0, so a bit-and with it is always false. The value IO_DATA_PATH_WIDTH covers the bits of the IO_DATA_PATH constants, so first pick those bits and then make the test using !=. This problem was found using Coccinelle (http://coccinelle.lip6.fr/). Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12 22:17:25 +08:00
if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
!= IO_DATA_PATH_WIDTH_8) {
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 19:13:46 +08:00
pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
}
pdev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
pdev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
if (pdev->resource[1]->end) {
pdev->resource[0]->end = 8;
pdev->resource[1]->end = (*is_kme) ? 2 : 1;
} else {
if (pdev->resource[0]->end < 16)
pcmcia: pcmcia_config_loop() default CIS entry handling Many drivers use the default CIS entry within their pcmcia_config_loop() callback function. Therefore, factor the default CIS entry handling out. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-02 21:30:31 +08:00
return -ENODEV;
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
}
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 19:13:46 +08:00
return pcmcia_request_io(pdev);
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
}
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
static int ide_config(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ide_info_t *info = link->priv;
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide) ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG, so convert it to use the dynamic debug infrastructure. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-23 18:55:28 +08:00
int ret = 0, is_kme = 0;
Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available" This reverts commit 5040cb8b7e61b7a03e8837920b9eb2c839bb1947. It breaks previously working ide-cs PIO configurations, causing problems like ide2: I/O resource 0xF883200E-0xF883200E not free. ide2: ports already in use, skipping probe rather than a working kernel. Cc: Thomas Kleffel <tk@maintech.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13 12:04:16 +08:00
unsigned long io_base, ctl_base;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
struct ide_host *host;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide) ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG, so convert it to use the dynamic debug infrastructure. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-23 18:55:28 +08:00
dev_dbg(&link->dev, "ide_config(0x%p)\n", link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] pcmcia: remove manf_id and card_id indirection As we read out the manufactor and card_id from the PCMCIA device in the PCMCIA core, and device drivers can access those reliably in struct pcmcia_device's fields manf_id and card_id, remove additional (and partly broken) manf_id and card_id detection logic from PCMCIA device drivers. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-26 09:28:53 +08:00
is_kme = ((link->manf_id == MANFID_KME) &&
((link->card_id == PRODID_KME_KXLC005_A) ||
(link->card_id == PRODID_KME_KXLC005_B)));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 19:13:46 +08:00
if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme)) {
pcmcia: introduce autoconfiguration feature Introduce an autoconfiguration feature to set certain values in pcmcia_loop_config(), instead of copying the same code over and over in each PCMCIA driver. At first, introduce the following options: CONF_AUTO_CHECK_VCC check or matching Vcc entry CONF_AUTO_SET_VPP set Vpp CONF_AUTO_AUDIO enable the speaker line CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 15:51:52 +08:00
link->config_flags &= ~CONF_AUTO_CHECK_VCC;
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 19:13:46 +08:00
if (pcmcia_loop_config(link, pcmcia_check_one_config, &is_kme))
pcmcia: use pcmcia_loop_config in pata and ide drivers Use the config loop helper in pata_pcmcia and ide_cs CC: Tejun Heo <htejun@gmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-29 14:43:20 +08:00
goto failed; /* No suitable config found */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
pcmcia: do not use io_req_t after call to pcmcia_request_io() After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-24 21:58:54 +08:00
io_base = link->resource[0]->start;
pcmcia: use autoconfiguration feature for ioports and iomem When CONF_AUTO_SET_IO or CONF_AUTO_SET_IOMEM are set, the corresponding fields in struct pcmcia_device *p_dev->resource[0,1,2] are set accordinly. Drivers wishing to override certain settings may do so in the callback function, but they no longer need to parse the CIS entries stored in cistpl_cftable_entry_t themselves. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 19:13:46 +08:00
if (link->resource[1]->end)
ctl_base = link->resource[1]->start;
else
ctl_base = link->resource[0]->start + 0x0e;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pcmcia: re-work pcmcia_request_irq() Instead of the old pcmcia_request_irq() interface, drivers may now choose between: - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will clean up automatically on calls to pcmcia_disable_device() or device ejection. - drivers still not capable of IRQF_SHARED (or not telling us so) may use the deprecated pcmcia_request_exclusive_irq() for the time being; they might receive a shared IRQ nonetheless. CC: linux-bluetooth@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-usb@vger.kernel.org CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-07 19:21:16 +08:00
if (!link->irq)
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide) ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG, so convert it to use the dynamic debug infrastructure. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-23 18:55:28 +08:00
goto failed;
pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device pcmcia_enable_device() now replaces pcmcia_request_configuration(). Instead of config_req_t, all necessary flags are either passed as a parameter to pcmcia_enable_device(), or (in rare circumstances) set in struct pcmcia_device -> flags. With the last remaining user of include/pcmcia/cs.h gone, remove all references. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-30 01:27:09 +08:00
ret = pcmcia_enable_device(link);
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide) ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG, so convert it to use the dynamic debug infrastructure. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-23 18:55:28 +08:00
if (ret)
goto failed;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* disable drive interrupts during IDE probe */
Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available" This reverts commit 5040cb8b7e61b7a03e8837920b9eb2c839bb1947. It breaks previously working ide-cs PIO configurations, causing problems like ide2: I/O resource 0xF883200E-0xF883200E not free. ide2: ports already in use, skipping probe rather than a working kernel. Cc: Thomas Kleffel <tk@maintech.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13 12:04:16 +08:00
outb(0x02, ctl_base);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
/* special setup for KXLC005 card */
if (is_kme)
Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available" This reverts commit 5040cb8b7e61b7a03e8837920b9eb2c839bb1947. It breaks previously working ide-cs PIO configurations, causing problems like ide2: I/O resource 0xF883200E-0xF883200E not free. ide2: ports already in use, skipping probe rather than a working kernel. Cc: Thomas Kleffel <tk@maintech.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13 12:04:16 +08:00
outb(0x81, ctl_base+1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
pcmcia: re-work pcmcia_request_irq() Instead of the old pcmcia_request_irq() interface, drivers may now choose between: - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will clean up automatically on calls to pcmcia_disable_device() or device ejection. - drivers still not capable of IRQF_SHARED (or not telling us so) may use the deprecated pcmcia_request_exclusive_irq() for the time being; they might receive a shared IRQ nonetheless. CC: linux-bluetooth@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-usb@vger.kernel.org CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-07 19:21:16 +08:00
host = idecs_register(io_base, ctl_base, link->irq, link);
pcmcia: do not use io_req_t after call to pcmcia_request_io() After pcmcia_request_io(), do not make use of the values stored in io_req_t, but instead use those found in struct pcmcia_device->resource[]. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org Acked-by: Marcel Holtmann <marcel@holtmann.org> (for drivers/bluetooth/) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-24 21:58:54 +08:00
if (host == NULL && resource_size(link->resource[0]) == 0x20) {
Revert "[PATCH] pcmcia: Make ide_cs work with the memory space of CF-Cards if IO space is not available" This reverts commit 5040cb8b7e61b7a03e8837920b9eb2c839bb1947. It breaks previously working ide-cs PIO configurations, causing problems like ide2: I/O resource 0xF883200E-0xF883200E not free. ide2: ports already in use, skipping probe rather than a working kernel. Cc: Thomas Kleffel <tk@maintech.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-13 12:04:16 +08:00
outb(0x02, ctl_base + 0x10);
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
host = idecs_register(io_base + 0x10, ctl_base + 0x10,
pcmcia: re-work pcmcia_request_irq() Instead of the old pcmcia_request_irq() interface, drivers may now choose between: - calling request_irq/free_irq directly. Use the IRQ from *p_dev->irq. - use pcmcia_request_irq(p_dev, handler_t); the PCMCIA core will clean up automatically on calls to pcmcia_disable_device() or device ejection. - drivers still not capable of IRQF_SHARED (or not telling us so) may use the deprecated pcmcia_request_exclusive_irq() for the time being; they might receive a shared IRQ nonetheless. CC: linux-bluetooth@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-usb@vger.kernel.org CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-07 19:21:16 +08:00
link->irq, link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
}
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
if (host == NULL)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
goto failed;
info->ndev = 1;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
info->host = host;
pcmcia: dev_node removal (drivers with updated printk call) As a second step, remove any usage of dev_node_t from drivers which only wrote to this typedef/struct, except one printk() which can easily be replaced by a dev_info()/dev_warn() call. CC: Harald Welte <laforge@gnumonks.org> CC: linux-ide@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-usb@vger.kernel.org Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-21 02:35:12 +08:00
dev_info(&link->dev, "ide-cs: hd%c: Vpp = %d.%d\n",
'a' + host->ports[0]->index * 2,
pcmcia: move Vpp setup to struct pcmcia_device Some drivers prefer to explicitly set Vpp. Instead of passing the voltage inside config_req_t, store it in struct pcmcia_device. CC: linux-ide@vger.kernel.org CC: netdev@vger.kernel.org CC: linux-mtd@lists.infradead.org CC: linux-wireless@vger.kernel.org CC: linux-serial@vger.kernel.org CC: linux-usb@vger.kernel.org CC: linux-scsi@vger.kernel.org Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> (for drivers/bluetooth) Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-07-29 21:50:55 +08:00
link->vpp / 10, link->vpp % 10);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
failed:
ide_release(link);
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
return -ENODEV;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* ide_config */
pcmcia: Fix ide-cs sparse warning Sparse shows the following warning: CHECK drivers/ide/legacy/ide-cs.c drivers/ide/legacy/ide-cs.c:378:6: warning: symbol 'ide_release' was not declared. Should it be static? Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> CC: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-07-14 01:46:36 +08:00
static void ide_release(struct pcmcia_device *link)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
{
ide_info_t *info = link->priv;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
struct ide_host *host = info->host;
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (ide) ide-cs.c is the only PCMCIA device driver making use of CONFIG_PCMCIA_DEBUG, so convert it to use the dynamic debug infrastructure. Also, remove all usages of the CS_CHECK macro and replace them with proper Linux style calling and return value checking. The extra error reporting may be dropped, as the PCMCIA core already complains about any (non-driver-author) errors. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2009-10-23 18:55:28 +08:00
dev_dbg(&link->dev, "ide_release(0x%p)\n", link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
ide/ide-cs: fix order of releasing resources ide_detach() called first ide_release() and then release_region(). This produced the following warnings: Trying to free nonexistent resource <000000000000c10e-000000000000c10e> Trying to free nonexistent resource <000000000000c100-000000000000c107> This is true, because the callchain inside ide_release() is: ide_release -> pcmcia_disable_device -> pcmcia_release_io So, the whole io-block is already gone for release_region(). To fix this, just swap the order of releasing (and remove the now obsolete shadowing). bzolnier: - release resources in ide_release() to fix ordering of events - remove stale FIXME note while at it Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15 17:33:08 +08:00
if (info->ndev) {
ide_hwif_t *hwif = host->ports[0];
unsigned long data_addr, ctl_addr;
data_addr = hwif->io_ports.data_addr;
ctl_addr = hwif->io_ports.ctl_addr;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
ide_host_remove(host);
ide/ide-cs: fix order of releasing resources ide_detach() called first ide_release() and then release_region(). This produced the following warnings: Trying to free nonexistent resource <000000000000c10e-000000000000c10e> Trying to free nonexistent resource <000000000000c100-000000000000c107> This is true, because the callchain inside ide_release() is: ide_release -> pcmcia_disable_device -> pcmcia_release_io So, the whole io-block is already gone for release_region(). To fix this, just swap the order of releasing (and remove the now obsolete shadowing). bzolnier: - release resources in ide_release() to fix ordering of events - remove stale FIXME note while at it Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15 17:33:08 +08:00
info->ndev = 0;
ide: add struct ide_host (take 3) * Add struct ide_host which keeps pointers to host's ports. * Add ide_host_alloc[_all]() and ide_host_remove() helpers. * Pass 'struct ide_host *host' instead of 'u8 *idx' to ide_device_add[_all]() and rename it to ide_host_register[_all](). * Convert host drivers and core code to use struct ide_host. * Remove no longer needed ide_find_port(). * Make ide_find_port_slot() static. * Unexport ide_unregister(). v2: * Add missing 'struct ide_host *host' to macide.c. v3: * Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/) (Noticed by Stephen Rothwell). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-24 01:55:57 +08:00
ide/ide-cs: fix order of releasing resources ide_detach() called first ide_release() and then release_region(). This produced the following warnings: Trying to free nonexistent resource <000000000000c10e-000000000000c10e> Trying to free nonexistent resource <000000000000c100-000000000000c107> This is true, because the callchain inside ide_release() is: ide_release -> pcmcia_disable_device -> pcmcia_release_io So, the whole io-block is already gone for release_region(). To fix this, just swap the order of releasing (and remove the now obsolete shadowing). bzolnier: - release resources in ide_release() to fix ordering of events - remove stale FIXME note while at it Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-15 17:33:08 +08:00
release_region(ctl_addr, 1);
release_region(data_addr, 8);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
[PATCH] pcmcia: remove dev_link_t and client_handle_t indirection dev_link_t * and client_handle_t both mean struct pcmcai_device * by now. Therefore, remove all such indirections. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:21:06 +08:00
pcmcia_disable_device(link);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
} /* ide_release */
[PATCH] pcmcia: new suspend core Move the suspend and resume methods out of the event handler, and into special functions. Also use these functions for pre- and post-reset, as almost all drivers already do, and the remaining ones can easily be converted. Bugfix to include/pcmcia/ds.c Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:21:18 +08:00
pcmcia: Convert pcmcia_device_id declarations to const Saves about 50KB of data. Old/new size of all objects: text data bss dec hex filename 563015 80096 130684 773795 bcea3 (TOTALS) 610916 32256 130632 773804 bceac (TOTALS) Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be> (for drivers/net/can/softing/softing_cs.c) Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-05-04 10:29:01 +08:00
static const struct pcmcia_device_id ide_ids[] = {
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_FUNC_ID(4),
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0000, 0x0000), /* Corsair */
[PATCH] pcmcia: add some IDs for ide-cs and dtl1_cs Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus and a different revision of the Socket CF+ Bluetooth card. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05 17:56:03 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0007, 0x0000), /* Hitachi */
ide-cs: Update device table Add CFA devices from I-O Data, Mitsubishi and Viking. Add SanDisk comment. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-04 00:48:54 +08:00
PCMCIA_DEVICE_MANF_CARD(0x000a, 0x0000), /* I-O Data CFA */
PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704),
pcmcia: uniform device IDs of pata_pcmcia and ide-cs Over time, a few differences have accumulated between pata_pcmcia and ide-cs. Fix those. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-04 03:12:07 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0032, 0x2904),
ide-cs: Update device table Add CFA devices from I-O Data, Mitsubishi and Viking. Add SanDisk comment. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-04 00:48:54 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */
pcmcia ide kingston compactflash's have a new manufacturer id Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID, In their new CF cards, they use a new one. Let's the ide subsystem recognize CF cards with the new id. Signed-off-by: Christophe Niclaes <cniclaes@develtech.com> Acked-by: Philippe De Muyter <phdm@macqel.be> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-21 02:53:34 +08:00
PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */
pcmcia: uniform device IDs of pata_pcmcia and ide-cs Over time, a few differences have accumulated between pata_pcmcia and ide-cs. Fix those. CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2008-08-04 03:12:07 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0097, 0x1620), /* TI emulated */
[PATCH] pcmcia: more IDs for ide_cs (Partly From: David Brownell <dbrownell@users.sourceforge.net> ) Make ID-CS recognize the CF card manufacturer records for Samsung, Lexar and STI. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:28 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d),
[PATCH] pcmcia: more IDs for ide_cs (Partly From: David Brownell <dbrownell@users.sourceforge.net> ) Make ID-CS recognize the CF card manufacturer records for Samsung, Lexar and STI. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:28 +08:00
PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
PCMCIA_DEVICE_MANF_CARD(0x0319, 0x0000), /* Hitachi */
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_MANF_CARD(0x2080, 0x0001),
ide-cs: Update device table Add CFA devices from I-O Data, Mitsubishi and Viking. Add SanDisk comment. Signed-off-by: Magnus Damm <damm@opensource.se> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-03-04 00:48:54 +08:00
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0100), /* Viking CFA */
PCMCIA_DEVICE_MANF_CARD(0x4e01, 0x0200), /* Lexar, Viking CFA */
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID123("Caravelle", "PSC-IDE ", "PSC000", 0x8c36137c, 0xd0693ab8, 0x2768a9f0),
PCMCIA_DEVICE_PROD_ID123("CDROM", "IDE", "MCD-601p", 0x1b9179ca, 0xede88951, 0x0d902f74),
PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
pcmcia: add CNF-CDROM-ID for ide Fixes this report: http://article.gmane.org/gmane.linux.kernel.pcmcia.devel/2228/ Reported-by: John McGrath <john@john-mcgrath.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15 04:09:32 +08:00
PCMCIA_DEVICE_PROD_ID12("CNF ", "CD-ROM", 0x46d7db81, 0x66536591),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
[PATCH] pcmcia: fix many device IDs If the product-id-string contains the '+' , '&' ,'_', it was not converted properly from the /etc/pcmcia/config(pcmcia-cs config file). Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 16:07:24 +08:00
PCMCIA_DEVICE_PROD_ID12("EXP", "CD+GAME", 0x6f58c983, 0x63c13aaf),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("EXP ", "CD-ROM", 0x0a5c52fd, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("EXP ", "PnPIDE", 0x0a5c52fd, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("FREECOM", "PCCARD-IDE", 0x5714cbf7, 0x48e0ab8e),
[PATCH] pcmcia: add some IDs for ide-cs and dtl1_cs Add some PCMCIA device IDs for the microdrive found in the Sharp Zaurus and a different revision of the Socket CF+ Bluetooth card. Signed-off-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-05 17:56:03 +08:00
PCMCIA_DEVICE_PROD_ID12("HITACHI", "FLASH", 0xf4f43949, 0x9eb86aae),
PCMCIA_DEVICE_PROD_ID12("HITACHI", "microdrive", 0xf4f43949, 0xa6d76178),
ide-cs: Add additional id string (corsair, 1GB) This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1) inside legacy/ide-cs.c. It also includes some minor whitespace cleanups. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-17 04:29:52 +08:00
PCMCIA_DEVICE_PROD_ID12("Hyperstone", "Model1", 0x3d5b9ef5, 0xca6ab420),
[PATCH] ide_cs: Add IBM microdrive to known IDs Add the IBM microdrive to the known PCMCIA IDs for ide_cs. Signed-off-by: Thomas Kleffel <tk@maintech.de> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-05-16 00:44:37 +08:00
PCMCIA_DEVICE_PROD_ID12("IBM", "microdrive", 0xb569a6e5, 0xa6d76178),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("IBM", "IBM17JSSFP20", 0xb569a6e5, 0xf2508753),
pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs This patch fixes the bad hashes for one Kingston and one Transcend card. Thanks to komuro for pointing this out. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-03 03:48:24 +08:00
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 1GB", 0x2e6d1829, 0x55d5bffb),
pata_pcmcia/ide-cs: add IDs for transcend and kingston cards This patch adds idstrings for Kingston 1GB/4GB and Transcend 4GB/8GB. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-20 01:54:11 +08:00
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF CARD 4GB", 0x2e6d1829, 0x531e7d10),
PCMCIA: Add another MemoryCard to ide-cs/pata_pcmcia One card submitted by user. Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-07-20 07:11:53 +08:00
PCMCIA_DEVICE_PROD_ID12("KINGSTON", "CF8GB", 0x2e6d1829, 0xacbe682e),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("IO DATA", "CBIDE2 ", 0x547e66dc, 0x8671043b),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149),
PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674),
PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b),
pcmcia: add an pata/ide ID Add an id for: product info: "M-Systems", "CF300", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer <mreimer@vpop.net> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-21 02:53:34 +08:00
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee),
[PATCH] PCMCIA: Add few IDs into ide-cs Few cards informations submitted by OpenZaurus users. Seagate 8GB microdrive: product info: "SEAGATE", "ST1" manfid 0x0111, 0x0000 One CF card: product info: "SAMSUNG", "04/05/06", "", "" manfid : 0x0000, 0x0000 Ridata 8GB Pro 150X Compact Flash Card: product info: "SMI VENDOR", "SMI PRODUCT", "" manfid: 0x000a, 0x0000 product info: "M-Systems", "CF500", "" manfid: 0x000a, 0x0000 product info: "TRANSCEND", "TS4GCF120", "" manfid: 0x000a, 0x0000 Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia" Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:14:29 +08:00
PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c),
[PATCH] pcmcia: update ID for NinjaATA Christian Zoz reported there are multiple NinjaATA devices all sharing the second product ID string, but not the first one. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-09-17 17:17:56 +08:00
PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591),
PCMCIA_DEVICE_PROD_ID12("PCMCIA", "PnPIDE", 0x281f1c5d, 0x0c694728),
PCMCIA_DEVICE_PROD_ID12("SHUTTLE TECHNOLOGY LTD.", "PCCARD-IDE/ATAPI Adapter", 0x4a3f0ba0, 0x322560e1),
[PATCH] PCMCIA: Add few IDs into ide-cs Few cards informations submitted by OpenZaurus users. Seagate 8GB microdrive: product info: "SEAGATE", "ST1" manfid 0x0111, 0x0000 One CF card: product info: "SAMSUNG", "04/05/06", "", "" manfid : 0x0000, 0x0000 Ridata 8GB Pro 150X Compact Flash Card: product info: "SMI VENDOR", "SMI PRODUCT", "" manfid: 0x000a, 0x0000 product info: "M-Systems", "CF500", "" manfid: 0x000a, 0x0000 product info: "TRANSCEND", "TS4GCF120", "" manfid: 0x000a, 0x0000 Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia" Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:14:29 +08:00
PCMCIA_DEVICE_PROD_ID12("SEAGATE", "ST1", 0x87c1b330, 0xe1f30883),
PCMCIA_DEVICE_PROD_ID12("SAMSUNG", "04/05/06", 0x43d74cb4, 0x6a22777d),
PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003),
[PATCH] pcmcia: add another ide-cs CF card id Add another CF card ID. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-01-25 22:36:32 +08:00
PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443),
pcmcia: add another pata/ide ID Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters <w1ll14@gmail.com> Signed-off-by: Kristoffer Ericson <Kristoffer_e1@hotmail.com> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-06-21 02:53:34 +08:00
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32),
[PATCH] pcmcia: Add an id to ide-cs.c Add an ID entry for: product info: "TRANSCEND", "TS1GCF80", "", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer <mreimer@vpop.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-27 06:56:00 +08:00
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1),
ide-cs: recognize 2GB CompactFlash from Transcend Without the following patch, the kernel does not automatically detect 2GB CompactFlash cards from Transcend. Signed-off-by: Fabrice Aeschbacher <fabrice.aeschbacher@siemens.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Peter Stuge <peter@stuge.se> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-05-06 04:03:51 +08:00
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2),
[PATCH] PCMCIA: Add few IDs into ide-cs Few cards informations submitted by OpenZaurus users. Seagate 8GB microdrive: product info: "SEAGATE", "ST1" manfid 0x0111, 0x0000 One CF card: product info: "SAMSUNG", "04/05/06", "", "" manfid : 0x0000, 0x0000 Ridata 8GB Pro 150X Compact Flash Card: product info: "SMI VENDOR", "SMI PRODUCT", "" manfid: 0x000a, 0x0000 product info: "M-Systems", "CF500", "" manfid: 0x000a, 0x0000 product info: "TRANSCEND", "TS4GCF120", "" manfid: 0x000a, 0x0000 Alan sayeth: "Same update needs to go into drivers/ata/pata_pcmcia" Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03 16:14:29 +08:00
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8),
pata_pcmcia / ide-cs: Fix bad hashes for Transcend and kingston IDs This patch fixes the bad hashes for one Kingston and one Transcend card. Thanks to komuro for pointing this out. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-05-03 03:48:24 +08:00
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF133", 0x709b1bf1, 0x7558f133),
pata_pcmcia/ide-cs: add IDs for transcend and kingston cards This patch adds idstrings for Kingston 1GB/4GB and Transcend 4GB/8GB. Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-04-20 01:54:11 +08:00
PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS8GCF133", 0x709b1bf1, 0xb2f89b47),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID12("WIT", "IDE16", 0x244e5994, 0x3e232852),
[PATCH] pcmcia: yet another IDE ID Microdrive reported by one of OpenEmbedded developers. product info: "WEIDA", "TWTTI", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) (equivalent update to pata_pcmcia.c by Dominik Brodowski) Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-31 05:28:09 +08:00
PCMCIA_DEVICE_PROD_ID12("WEIDA", "TWTTI", 0xcc7cf69c, 0x212bb918),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_PROD_ID1("STI Flash", 0xe4a13209),
[PATCH] pcmcia: more IDs for ide_cs (Partly From: David Brownell <dbrownell@users.sourceforge.net> ) Make ID-CS recognize the CF card manufacturer records for Samsung, Lexar and STI. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-10 04:03:28 +08:00
PCMCIA_DEVICE_PROD_ID12("STI", "Flash 5.0", 0xbf2df18d, 0x8cb57a0e),
[PATCH] pcmcia: ide-cs id_table update SanDisk ConnectPlus has two functions. Function 0 is prism2 card, currently only supported by HostAP (not in the kernel). Function 1 is 128M flash, supported by ide-cs. This patch adds an entry for function 1 to ide-cs.c. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-28 16:07:19 +08:00
PCMCIA_MFC_DEVICE_PROD_ID12(1, "SanDisk", "ConnectPlus", 0x7a954bd9, 0x74be00c6),
pcmcia: add another pata/ide ID Support for Apacer photo steno pro card. Signed-off-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> CC: Alan Cox <alan@lxorguk.ukuu.org.uk CC: linux-ide@vger.kernel.org
2008-11-06 18:44:34 +08:00
PCMCIA_DEVICE_PROD_ID2("Flash Card", 0x5a362506),
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
PCMCIA_DEVICE_NULL,
};
MODULE_DEVICE_TABLE(pcmcia, ide_ids);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
static struct pcmcia_driver ide_cs_driver = {
.owner = THIS_MODULE,
pcmcia: move driver name to struct pcmcia_driver Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-08 17:36:26 +08:00
.name = "ide-cs",
[PATCH] pcmcia: add return value to _config() functions Most of the driver initialization isn't done in the .probe function, but in the internal _config() functions. Make them return a value, so that .probe can properly report whether the probing of the device succeeded or not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-03-31 23:26:06 +08:00
.probe = ide_probe,
[PATCH] pcmcia: unify detach, REMOVAL_EVENT handlers into one remove callback Unify the "detach" and REMOVAL_EVENT handlers to one "remove" function. Old functionality is preserved, for the moment. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2005-11-15 04:23:14 +08:00
.remove = ide_detach,
[PATCH] pcmcia: id_table for ide_cs.c Add pcmcia_device_id table. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-28 07:28:28 +08:00
.id_table = ide_ids,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
};
static int __init init_ide_cs(void)
{
return pcmcia_register_driver(&ide_cs_driver);
}
static void __exit exit_ide_cs(void)
{
pcmcia_unregister_driver(&ide_cs_driver);
}
[PATCH] pcmcia: defer ide-cs initialization after other IDE drivers started up Avoid registering PCMCIA CF cards before other IDE stuff. This means the risk of /dev/hd* being re-ordered is lessened. The _sane_ thing to assert any ordering is to use udev, nameif and so on, of course. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-01 20:16:55 +08:00
late_initcall(init_ide_cs);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 06:20:36 +08:00
module_exit(exit_ide_cs);