UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/clk/meson/axg.c

1367 lines
33 KiB
C
Raw Permalink Normal View History

clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
// SPDX-License-Identifier: GPL-2.0+
/*
* AmLogic Meson-AXG Clock Controller Driver
*
* Copyright (c) 2016 Baylibre SAS.
* Author: Michael Turquette <mturquette@baylibre.com>
*
* Copyright (c) 2017 Amlogic, inc.
* Author: Qiufang Dai <qiufang.dai@amlogic.com>
*/
#include <linux/clk-provider.h>
clk: meson: add regmap to the clock controllers This change registers a regmap in meson8b, gxbb and axg controllers. The clock are still accessing their registers directly through iomem. Once all clocks handled by these controllers have been move to regmap, the regmap register will be removed and replaced with a syscon request. This is needed because other drivers, such as the HDMI driver, need to access the HHI register region Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:35 +08:00
#include <linux/init.h>
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
#include <linux/of_device.h>
#include <linux/platform_device.h>
clk: meson: rework and clean drivers dependencies Initially, the meson clock directory only hosted 2 controllers drivers, for meson8 and gxbb. At the time, both used the same set of clock drivers so managing the dependencies was not a big concern. Since this ancient time, entropy did its job, controllers with different requirement and specific clock drivers have been added. Unfortunately, we did not do a great job at managing the dependencies between the controllers and the different clock drivers. Some drivers, such as clk-phase or vid-pll-div, are compiled even if they are useless on the target (meson8). As we are adding new controllers, we need to be able to pick a driver w/o pulling the whole thing. The patch aims to clean things up by: * providing a dedicated CONFIG_ for each clock drivers * allowing clock drivers to be compiled as a modules, if possible * stating explicitly which drivers are required by each controller. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201125841.26785-5-jbrunet@baylibre.com
2019-02-01 20:58:41 +08:00
#include "clk-regmap.h"
#include "clk-pll.h"
#include "clk-mpll.h"
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
#include "axg.h"
clk: meson: factorise meson64 peripheral clock controller drivers The function used to probe the peripheral clock controller of the arm64 amlogic SoCs is mostly the same. We now have 3 of those controllers so it is time to factorize things a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
2019-02-01 22:53:45 +08:00
#include "meson-eeclk.h"
clk: meson: axg: claim clock controller input clock from DT Instead of relying on a fixed name for the xtal clock, claim the controller input clock trough DT. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190116175435.4990-3-jbrunet@baylibre.com
2019-01-17 01:54:34 +08:00
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
static DEFINE_SPINLOCK(meson_clk_lock);
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
static struct clk_regmap axg_fixed_pll_dco = {
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
.data = &(struct meson_clk_pll_data){
clk: meson: clk-pll: add enable bit Add the enable the bit of the pll clocks. These pll clocks may be disabled but we can't model this as an external gate since the pll needs to lock when enabled. Adding this bit allows to drop the poke of the first register of PLL. This will be useful to model the different components of the pll using generic clocks elements Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:50 +08:00
.en = {
.reg_off = HHI_MPLL_CNTL,
.shift = 30,
.width = 1,
},
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
.m = {
.reg_off = HHI_MPLL_CNTL,
.shift = 0,
.width = 9,
},
.n = {
.reg_off = HHI_MPLL_CNTL,
.shift = 9,
.width = 5,
},
.frac = {
.reg_off = HHI_MPLL_CNTL2,
.shift = 0,
.width = 12,
},
.l = {
.reg_off = HHI_MPLL_CNTL,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = HHI_MPLL_CNTL,
.shift = 29,
.width = 1,
},
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data){
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.name = "fixed_pll_dco",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &meson_clk_pll_ro_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_data = &(const struct clk_parent_data) {
.fw_name = "xtal",
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
static struct clk_regmap axg_fixed_pll = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_MPLL_CNTL,
.shift = 16,
.width = 2,
.flags = CLK_DIVIDER_POWER_OF_TWO,
},
.hw.init = &(struct clk_init_data){
.name = "fixed_pll",
.ops = &clk_regmap_divider_ro_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_fixed_pll_dco.hw
},
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.num_parents = 1,
/*
* This clock won't ever change at runtime so
* CLK_SET_RATE_PARENT is not required
*/
},
};
static struct clk_regmap axg_sys_pll_dco = {
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
.data = &(struct meson_clk_pll_data){
clk: meson: clk-pll: add enable bit Add the enable the bit of the pll clocks. These pll clocks may be disabled but we can't model this as an external gate since the pll needs to lock when enabled. Adding this bit allows to drop the poke of the first register of PLL. This will be useful to model the different components of the pll using generic clocks elements Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:50 +08:00
.en = {
.reg_off = HHI_SYS_PLL_CNTL,
.shift = 30,
.width = 1,
},
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
.m = {
.reg_off = HHI_SYS_PLL_CNTL,
.shift = 0,
.width = 9,
},
.n = {
.reg_off = HHI_SYS_PLL_CNTL,
.shift = 9,
.width = 5,
},
.l = {
.reg_off = HHI_SYS_PLL_CNTL,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = HHI_SYS_PLL_CNTL,
.shift = 29,
.width = 1,
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
},
.hw.init = &(struct clk_init_data){
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.name = "sys_pll_dco",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &meson_clk_pll_ro_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_data = &(const struct clk_parent_data) {
.fw_name = "xtal",
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
static struct clk_regmap axg_sys_pll = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_SYS_PLL_CNTL,
.shift = 16,
.width = 2,
.flags = CLK_DIVIDER_POWER_OF_TWO,
},
.hw.init = &(struct clk_init_data){
.name = "sys_pll",
.ops = &clk_regmap_divider_ro_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_sys_pll_dco.hw
},
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: clk-pll: drop hard-coded rates from pll tables Putting hard-coded rates inside the parameter tables assumes that the parent is known and will never change. That's a big assumption we should not make. We have everything we need to recalculate the output rate using the parent rate and the rest of the parameters. Let's do so and drop the rates from the tables. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:53 +08:00
static const struct pll_params_table axg_gp0_pll_params_table[] = {
PLL_PARAMS(40, 1),
PLL_PARAMS(41, 1),
PLL_PARAMS(42, 1),
PLL_PARAMS(43, 1),
PLL_PARAMS(44, 1),
PLL_PARAMS(45, 1),
PLL_PARAMS(46, 1),
PLL_PARAMS(47, 1),
PLL_PARAMS(48, 1),
PLL_PARAMS(49, 1),
PLL_PARAMS(50, 1),
PLL_PARAMS(51, 1),
PLL_PARAMS(52, 1),
PLL_PARAMS(53, 1),
PLL_PARAMS(54, 1),
PLL_PARAMS(55, 1),
PLL_PARAMS(56, 1),
PLL_PARAMS(57, 1),
PLL_PARAMS(58, 1),
PLL_PARAMS(59, 1),
PLL_PARAMS(60, 1),
PLL_PARAMS(61, 1),
PLL_PARAMS(62, 1),
PLL_PARAMS(63, 1),
PLL_PARAMS(64, 1),
PLL_PARAMS(65, 1),
PLL_PARAMS(66, 1),
PLL_PARAMS(67, 1),
PLL_PARAMS(68, 1),
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
{ /* sentinel */ },
};
clk: meson: Drop unused local variable and add static Fixes the following warnings: drivers/clk/meson/meson8b.c:512:19: warning: symbol 'meson8b_mpeg_clk_div' was not declared. Should it be static? drivers/clk/meson/meson8b.c:526:19: warning: symbol 'meson8b_clk81' was not declared. Should it be static? drivers/clk/meson/meson8b.c:540:19: warning: symbol 'meson8b_cpu_in_sel' was not declared. Should it be static? drivers/clk/meson/meson8b.c:591:19: warning: symbol 'meson8b_cpu_scale_div' was not declared. Should it be static? drivers/clk/meson/meson8b.c:608:19: warning: symbol 'meson8b_cpu_scale_out_sel' was not declared. Should it be static? drivers/clk/meson/meson8b.c:626:19: warning: symbol 'meson8b_cpu_clk' was not declared. Should it be static? drivers/clk/meson/gxbb.c:392:27: warning: symbol 'gxbb_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/gxbb.c:439:27: warning: symbol 'gxl_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/axg.c:195:27: warning: symbol 'axg_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/axg.c:248:27: warning: symbol 'axg_hifi_init_regs' was not declared. Should it be static? drivers/clk/meson/meson8b.c: In function 'meson8b_clkc_probe': drivers/clk/meson/meson8b.c:1052:14: warning: unused variable 'clk' [-Wunused-variable] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-15 06:36:31 +08:00
static const struct reg_sequence axg_gp0_init_regs[] = {
clk: meson: add gp0 frac parameter for axg and gxl Add the frac parameter for the gp0 pll of the axg and gxl. This allows to achieve rates between the fixed settings provided by the table. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:40 +08:00
{ .reg = HHI_GP0_PLL_CNTL1, .def = 0xc084b000 },
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
{ .reg = HHI_GP0_PLL_CNTL2, .def = 0xb75020be },
{ .reg = HHI_GP0_PLL_CNTL3, .def = 0x0a59a288 },
{ .reg = HHI_GP0_PLL_CNTL4, .def = 0xc000004d },
{ .reg = HHI_GP0_PLL_CNTL5, .def = 0x00078000 },
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
};
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
static struct clk_regmap axg_gp0_pll_dco = {
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
.data = &(struct meson_clk_pll_data){
clk: meson: clk-pll: add enable bit Add the enable the bit of the pll clocks. These pll clocks may be disabled but we can't model this as an external gate since the pll needs to lock when enabled. Adding this bit allows to drop the poke of the first register of PLL. This will be useful to model the different components of the pll using generic clocks elements Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:50 +08:00
.en = {
.reg_off = HHI_GP0_PLL_CNTL,
.shift = 30,
.width = 1,
},
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
.m = {
.reg_off = HHI_GP0_PLL_CNTL,
.shift = 0,
.width = 9,
},
.n = {
.reg_off = HHI_GP0_PLL_CNTL,
.shift = 9,
.width = 5,
},
clk: meson: add gp0 frac parameter for axg and gxl Add the frac parameter for the gp0 pll of the axg and gxl. This allows to achieve rates between the fixed settings provided by the table. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:40 +08:00
.frac = {
.reg_off = HHI_GP0_PLL_CNTL1,
.shift = 0,
.width = 10,
},
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
.l = {
.reg_off = HHI_GP0_PLL_CNTL,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = HHI_GP0_PLL_CNTL,
.shift = 29,
.width = 1,
},
clk: meson: clk-pll: drop hard-coded rates from pll tables Putting hard-coded rates inside the parameter tables assumes that the parent is known and will never change. That's a big assumption we should not make. We have everything we need to recalculate the output rate using the parent rate and the rest of the parameters. Let's do so and drop the rates from the tables. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:53 +08:00
.table = axg_gp0_pll_params_table,
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
.init_regs = axg_gp0_init_regs,
.init_count = ARRAY_SIZE(axg_gp0_init_regs),
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data){
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.name = "gp0_pll_dco",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &meson_clk_pll_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_data = &(const struct clk_parent_data) {
.fw_name = "xtal",
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
static struct clk_regmap axg_gp0_pll = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_GP0_PLL_CNTL,
.shift = 16,
.width = 2,
.flags = CLK_DIVIDER_POWER_OF_TWO,
},
.hw.init = &(struct clk_init_data){
.name = "gp0_pll",
.ops = &clk_regmap_divider_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_gp0_pll_dco.hw
},
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: Drop unused local variable and add static Fixes the following warnings: drivers/clk/meson/meson8b.c:512:19: warning: symbol 'meson8b_mpeg_clk_div' was not declared. Should it be static? drivers/clk/meson/meson8b.c:526:19: warning: symbol 'meson8b_clk81' was not declared. Should it be static? drivers/clk/meson/meson8b.c:540:19: warning: symbol 'meson8b_cpu_in_sel' was not declared. Should it be static? drivers/clk/meson/meson8b.c:591:19: warning: symbol 'meson8b_cpu_scale_div' was not declared. Should it be static? drivers/clk/meson/meson8b.c:608:19: warning: symbol 'meson8b_cpu_scale_out_sel' was not declared. Should it be static? drivers/clk/meson/meson8b.c:626:19: warning: symbol 'meson8b_cpu_clk' was not declared. Should it be static? drivers/clk/meson/gxbb.c:392:27: warning: symbol 'gxbb_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/gxbb.c:439:27: warning: symbol 'gxl_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/axg.c:195:27: warning: symbol 'axg_gp0_init_regs' was not declared. Should it be static? drivers/clk/meson/axg.c:248:27: warning: symbol 'axg_hifi_init_regs' was not declared. Should it be static? drivers/clk/meson/meson8b.c: In function 'meson8b_clkc_probe': drivers/clk/meson/meson8b.c:1052:14: warning: unused variable 'clk' [-Wunused-variable] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-03-15 06:36:31 +08:00
static const struct reg_sequence axg_hifi_init_regs[] = {
clk: meson: axg: add hifi pll clock Add the hifi pll to the axg clock controller. This clock maybe used as an input of the axg audio clock controller. It uses the same settings table as the gp0 pll but has a frac parameter allowing more precision. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:43 +08:00
{ .reg = HHI_HIFI_PLL_CNTL1, .def = 0xc084b000 },
{ .reg = HHI_HIFI_PLL_CNTL2, .def = 0xb75020be },
{ .reg = HHI_HIFI_PLL_CNTL3, .def = 0x0a6a3a88 },
{ .reg = HHI_HIFI_PLL_CNTL4, .def = 0xc000004d },
{ .reg = HHI_HIFI_PLL_CNTL5, .def = 0x00058000 },
};
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
static struct clk_regmap axg_hifi_pll_dco = {
clk: meson: axg: add hifi pll clock Add the hifi pll to the axg clock controller. This clock maybe used as an input of the axg audio clock controller. It uses the same settings table as the gp0 pll but has a frac parameter allowing more precision. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:43 +08:00
.data = &(struct meson_clk_pll_data){
clk: meson: clk-pll: add enable bit Add the enable the bit of the pll clocks. These pll clocks may be disabled but we can't model this as an external gate since the pll needs to lock when enabled. Adding this bit allows to drop the poke of the first register of PLL. This will be useful to model the different components of the pll using generic clocks elements Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:50 +08:00
.en = {
.reg_off = HHI_HIFI_PLL_CNTL,
.shift = 30,
.width = 1,
},
clk: meson: axg: add hifi pll clock Add the hifi pll to the axg clock controller. This clock maybe used as an input of the axg audio clock controller. It uses the same settings table as the gp0 pll but has a frac parameter allowing more precision. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:43 +08:00
.m = {
.reg_off = HHI_HIFI_PLL_CNTL,
.shift = 0,
.width = 9,
},
.n = {
.reg_off = HHI_HIFI_PLL_CNTL,
.shift = 9,
.width = 5,
},
.frac = {
.reg_off = HHI_HIFI_PLL_CNTL5,
.shift = 0,
.width = 13,
},
.l = {
.reg_off = HHI_HIFI_PLL_CNTL,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = HHI_HIFI_PLL_CNTL,
.shift = 29,
.width = 1,
},
clk: meson: clk-pll: drop hard-coded rates from pll tables Putting hard-coded rates inside the parameter tables assumes that the parent is known and will never change. That's a big assumption we should not make. We have everything we need to recalculate the output rate using the parent rate and the rest of the parameters. Let's do so and drop the rates from the tables. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:53 +08:00
.table = axg_gp0_pll_params_table,
clk: meson: axg: add hifi pll clock Add the hifi pll to the axg clock controller. This clock maybe used as an input of the axg audio clock controller. It uses the same settings table as the gp0 pll but has a frac parameter allowing more precision. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:43 +08:00
.init_regs = axg_hifi_init_regs,
.init_count = ARRAY_SIZE(axg_hifi_init_regs),
.flags = CLK_MESON_PLL_ROUND_CLOSEST,
},
.hw.init = &(struct clk_init_data){
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.name = "hifi_pll_dco",
clk: meson: axg: add hifi pll clock Add the hifi pll to the axg clock controller. This clock maybe used as an input of the axg audio clock controller. It uses the same settings table as the gp0 pll but has a frac parameter allowing more precision. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:43 +08:00
.ops = &meson_clk_pll_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_data = &(const struct clk_parent_data) {
.fw_name = "xtal",
},
clk: meson: axg: add hifi pll clock Add the hifi pll to the axg clock controller. This clock maybe used as an input of the axg audio clock controller. It uses the same settings table as the gp0 pll but has a frac parameter allowing more precision. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:43 +08:00
.num_parents = 1,
},
};
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
static struct clk_regmap axg_hifi_pll = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_HIFI_PLL_CNTL,
.shift = 16,
.width = 2,
.flags = CLK_DIVIDER_POWER_OF_TWO,
},
.hw.init = &(struct clk_init_data){
.name = "hifi_pll",
.ops = &clk_regmap_divider_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_hifi_pll_dco.hw
},
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
static struct clk_fixed_factor axg_fclk_div2_div = {
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.mult = 1,
.div = 2,
.hw.init = &(struct clk_init_data){
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
.name = "fclk_div2_div",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &clk_fixed_factor_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) { &axg_fixed_pll.hw },
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
static struct clk_regmap axg_fclk_div2 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL6,
.bit_idx = 27,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div2",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_fclk_div2_div.hw
},
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
.num_parents = 1,
clk: meson: axg: mark fdiv2 and fdiv3 as critical Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor uses the fdiv2 and fdiv3 to, among other things, provide the cpu clock. Until clock hand-off mechanism makes its way to CCF and the generic SCPI claims platform specific clocks, these clocks must be marked as critical to make sure they are never disabled when needed by the co-processor. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-08 17:31:23 +08:00
.flags = CLK_IS_CRITICAL,
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
},
};
static struct clk_fixed_factor axg_fclk_div3_div = {
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.mult = 1,
.div = 3,
.hw.init = &(struct clk_init_data){
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
.name = "fclk_div3_div",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &clk_fixed_factor_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) { &axg_fixed_pll.hw },
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
static struct clk_regmap axg_fclk_div3 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL6,
.bit_idx = 28,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div3",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_fclk_div3_div.hw
},
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
.num_parents = 1,
clk: meson: axg: mark fdiv2 and fdiv3 as critical Similar to gxbb and gxl platforms, axg SCPI Cortex-M co-processor uses the fdiv2 and fdiv3 to, among other things, provide the cpu clock. Until clock hand-off mechanism makes its way to CCF and the generic SCPI claims platform specific clocks, these clocks must be marked as critical to make sure they are never disabled when needed by the co-processor. Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2018-11-08 17:31:23 +08:00
/*
* FIXME:
* This clock, as fdiv2, is used by the SCPI FW and is required
* by the platform to operate correctly.
* Until the following condition are met, we need this clock to
* be marked as critical:
* a) The SCPI generic driver claims and enable all the clocks
* it needs
* b) CCF has a clock hand-off mechanism to make the sure the
* clock stays on until the proper driver comes along
*/
.flags = CLK_IS_CRITICAL,
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
},
};
static struct clk_fixed_factor axg_fclk_div4_div = {
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.mult = 1,
.div = 4,
.hw.init = &(struct clk_init_data){
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
.name = "fclk_div4_div",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &clk_fixed_factor_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) { &axg_fixed_pll.hw },
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
static struct clk_regmap axg_fclk_div4 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL6,
.bit_idx = 29,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div4",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_fclk_div4_div.hw
},
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
.num_parents = 1,
},
};
static struct clk_fixed_factor axg_fclk_div5_div = {
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.mult = 1,
.div = 5,
.hw.init = &(struct clk_init_data){
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
.name = "fclk_div5_div",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &clk_fixed_factor_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) { &axg_fixed_pll.hw },
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
static struct clk_regmap axg_fclk_div5 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL6,
.bit_idx = 30,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div5",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_fclk_div5_div.hw
},
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
.num_parents = 1,
},
};
static struct clk_fixed_factor axg_fclk_div7_div = {
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.mult = 1,
.div = 7,
.hw.init = &(struct clk_init_data){
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
.name = "fclk_div7_div",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &clk_fixed_factor_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_fixed_pll.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
static struct clk_regmap axg_fclk_div7 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL6,
.bit_idx = 31,
},
.hw.init = &(struct clk_init_data){
.name = "fclk_div7",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_fclk_div7_div.hw
},
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
.num_parents = 1,
},
};
clk: meson: add mpll pre-divider mpll clocks parent can actually be divided by 1 or 2. So far, this divider has always been set to 1, so the calculation was correct. Now that we know it exists, model the tree correctly. If we ever get a platform where the divider is different, we won't get into trouble Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:44 +08:00
static struct clk_regmap axg_mpll_prediv = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_MPLL_CNTL5,
.shift = 12,
.width = 1,
},
.hw.init = &(struct clk_init_data){
.name = "mpll_prediv",
.ops = &clk_regmap_divider_ro_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_fixed_pll.hw
},
clk: meson: add mpll pre-divider mpll clocks parent can actually be divided by 1 or 2. So far, this divider has always been set to 1, so the calculation was correct. Now that we know it exists, model the tree correctly. If we ever get a platform where the divider is different, we won't get into trouble Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:44 +08:00
.num_parents = 1,
},
};
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
static struct clk_regmap axg_mpll0_div = {
clk: meson: migrate mplls clocks to clk_regmap Rework meson mpll driver to use clk_regmap and move meson8b, gxbb and axg clocks using meson_clk_mpll to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:40 +08:00
.data = &(struct meson_clk_mpll_data){
.sdm = {
.reg_off = HHI_MPLL_CNTL7,
.shift = 0,
.width = 14,
},
.sdm_en = {
.reg_off = HHI_MPLL_CNTL7,
.shift = 15,
.width = 1,
},
.n2 = {
.reg_off = HHI_MPLL_CNTL7,
.shift = 16,
.width = 9,
},
.misc = {
.reg_off = HHI_PLL_TOP_MISC,
.shift = 0,
.width = 1,
},
.lock = &meson_clk_lock,
clk: meson: axg: let mpll clocks round closest Let the mpll dividers achieve the closest rate possible, even if it means rounding the requested rate up. This is done to improve the accuracy of the rates provided by these plls to the audio subsystem Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-16 00:36:52 +08:00
.flags = CLK_MESON_MPLL_ROUND_CLOSEST,
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
},
.hw.init = &(struct clk_init_data){
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
.name = "mpll0_div",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &meson_clk_mpll_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_mpll_prediv.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
static struct clk_regmap axg_mpll0 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL7,
.bit_idx = 14,
},
.hw.init = &(struct clk_init_data){
.name = "mpll0",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_mpll0_div.hw
},
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap axg_mpll1_div = {
clk: meson: migrate mplls clocks to clk_regmap Rework meson mpll driver to use clk_regmap and move meson8b, gxbb and axg clocks using meson_clk_mpll to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:40 +08:00
.data = &(struct meson_clk_mpll_data){
.sdm = {
.reg_off = HHI_MPLL_CNTL8,
.shift = 0,
.width = 14,
},
.sdm_en = {
.reg_off = HHI_MPLL_CNTL8,
.shift = 15,
.width = 1,
},
.n2 = {
.reg_off = HHI_MPLL_CNTL8,
.shift = 16,
.width = 9,
},
.misc = {
.reg_off = HHI_PLL_TOP_MISC,
.shift = 1,
.width = 1,
},
.lock = &meson_clk_lock,
clk: meson: axg: let mpll clocks round closest Let the mpll dividers achieve the closest rate possible, even if it means rounding the requested rate up. This is done to improve the accuracy of the rates provided by these plls to the audio subsystem Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-16 00:36:52 +08:00
.flags = CLK_MESON_MPLL_ROUND_CLOSEST,
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
},
.hw.init = &(struct clk_init_data){
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
.name = "mpll1_div",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &meson_clk_mpll_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_mpll_prediv.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
static struct clk_regmap axg_mpll1 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL8,
.bit_idx = 14,
},
.hw.init = &(struct clk_init_data){
.name = "mpll1",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_mpll1_div.hw
},
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap axg_mpll2_div = {
clk: meson: migrate mplls clocks to clk_regmap Rework meson mpll driver to use clk_regmap and move meson8b, gxbb and axg clocks using meson_clk_mpll to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:40 +08:00
.data = &(struct meson_clk_mpll_data){
.sdm = {
.reg_off = HHI_MPLL_CNTL9,
.shift = 0,
.width = 14,
},
.sdm_en = {
.reg_off = HHI_MPLL_CNTL9,
.shift = 15,
.width = 1,
},
.n2 = {
.reg_off = HHI_MPLL_CNTL9,
.shift = 16,
.width = 9,
},
clk: meson: axg: spread spectrum is on mpll2 After testing, it appears that the SSEN bit controls the spread spectrum function on MPLL2, not MPLL0. Fixes: 78b4af312f91 ("clk: meson-axg: add clock controller drivers") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-05-13 20:31:11 +08:00
.ssen = {
.reg_off = HHI_MPLL_CNTL,
.shift = 25,
.width = 1,
},
clk: meson: migrate mplls clocks to clk_regmap Rework meson mpll driver to use clk_regmap and move meson8b, gxbb and axg clocks using meson_clk_mpll to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:40 +08:00
.misc = {
.reg_off = HHI_PLL_TOP_MISC,
.shift = 2,
.width = 1,
},
.lock = &meson_clk_lock,
clk: meson: axg: let mpll clocks round closest Let the mpll dividers achieve the closest rate possible, even if it means rounding the requested rate up. This is done to improve the accuracy of the rates provided by these plls to the audio subsystem Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-16 00:36:52 +08:00
.flags = CLK_MESON_MPLL_ROUND_CLOSEST,
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
},
.hw.init = &(struct clk_init_data){
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
.name = "mpll2_div",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &meson_clk_mpll_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_mpll_prediv.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
static struct clk_regmap axg_mpll2 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL_CNTL9,
.bit_idx = 14,
},
.hw.init = &(struct clk_init_data){
.name = "mpll2",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_mpll2_div.hw
},
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap axg_mpll3_div = {
clk: meson: migrate mplls clocks to clk_regmap Rework meson mpll driver to use clk_regmap and move meson8b, gxbb and axg clocks using meson_clk_mpll to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:40 +08:00
.data = &(struct meson_clk_mpll_data){
.sdm = {
.reg_off = HHI_MPLL3_CNTL0,
.shift = 12,
.width = 14,
},
.sdm_en = {
.reg_off = HHI_MPLL3_CNTL0,
.shift = 11,
.width = 1,
},
.n2 = {
.reg_off = HHI_MPLL3_CNTL0,
.shift = 2,
.width = 9,
},
.misc = {
.reg_off = HHI_PLL_TOP_MISC,
.shift = 3,
.width = 1,
},
.lock = &meson_clk_lock,
clk: meson: axg: let mpll clocks round closest Let the mpll dividers achieve the closest rate possible, even if it means rounding the requested rate up. This is done to improve the accuracy of the rates provided by these plls to the audio subsystem Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-05-16 00:36:52 +08:00
.flags = CLK_MESON_MPLL_ROUND_CLOSEST,
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
},
.hw.init = &(struct clk_init_data){
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
.name = "mpll3_div",
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.ops = &meson_clk_mpll_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_mpll_prediv.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
},
};
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
static struct clk_regmap axg_mpll3 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPLL3_CNTL0,
.bit_idx = 0,
},
.hw.init = &(struct clk_init_data){
.name = "mpll3",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_mpll3_div.hw
},
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: clk-pll: drop hard-coded rates from pll tables Putting hard-coded rates inside the parameter tables assumes that the parent is known and will never change. That's a big assumption we should not make. We have everything we need to recalculate the output rate using the parent rate and the rest of the parameters. Let's do so and drop the rates from the tables. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:53 +08:00
static const struct pll_params_table axg_pcie_pll_params_table[] = {
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
{
clk: meson: clk-pll: drop hard-coded rates from pll tables Putting hard-coded rates inside the parameter tables assumes that the parent is known and will never change. That's a big assumption we should not make. We have everything we need to recalculate the output rate using the parent rate and the rest of the parameters. Let's do so and drop the rates from the tables. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:53 +08:00
.m = 200,
.n = 3,
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
},
{ /* sentinel */ },
};
static const struct reg_sequence axg_pcie_init_regs[] = {
{ .reg = HHI_PCIE_PLL_CNTL1, .def = 0x0084a2aa },
{ .reg = HHI_PCIE_PLL_CNTL2, .def = 0xb75020be },
{ .reg = HHI_PCIE_PLL_CNTL3, .def = 0x0a47488e },
{ .reg = HHI_PCIE_PLL_CNTL4, .def = 0xc000004d },
{ .reg = HHI_PCIE_PLL_CNTL5, .def = 0x00078000 },
{ .reg = HHI_PCIE_PLL_CNTL6, .def = 0x002323c6 },
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
{ .reg = HHI_PCIE_PLL_CNTL, .def = 0x400106c8 },
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
};
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
static struct clk_regmap axg_pcie_pll_dco = {
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
.data = &(struct meson_clk_pll_data){
clk: meson: clk-pll: add enable bit Add the enable the bit of the pll clocks. These pll clocks may be disabled but we can't model this as an external gate since the pll needs to lock when enabled. Adding this bit allows to drop the poke of the first register of PLL. This will be useful to model the different components of the pll using generic clocks elements Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:50 +08:00
.en = {
.reg_off = HHI_PCIE_PLL_CNTL,
.shift = 30,
.width = 1,
},
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
.m = {
.reg_off = HHI_PCIE_PLL_CNTL,
.shift = 0,
.width = 9,
},
.n = {
.reg_off = HHI_PCIE_PLL_CNTL,
.shift = 9,
.width = 5,
},
.frac = {
.reg_off = HHI_PCIE_PLL_CNTL1,
.shift = 0,
.width = 12,
},
.l = {
.reg_off = HHI_PCIE_PLL_CNTL,
.shift = 31,
.width = 1,
},
.rst = {
.reg_off = HHI_PCIE_PLL_CNTL,
.shift = 29,
.width = 1,
},
clk: meson: clk-pll: drop hard-coded rates from pll tables Putting hard-coded rates inside the parameter tables assumes that the parent is known and will never change. That's a big assumption we should not make. We have everything we need to recalculate the output rate using the parent rate and the rest of the parameters. Let's do so and drop the rates from the tables. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:53 +08:00
.table = axg_pcie_pll_params_table,
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
.init_regs = axg_pcie_init_regs,
.init_count = ARRAY_SIZE(axg_pcie_init_regs),
},
.hw.init = &(struct clk_init_data){
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.name = "pcie_pll_dco",
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
.ops = &meson_clk_pll_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_data = &(const struct clk_parent_data) {
.fw_name = "xtal",
},
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
.num_parents = 1,
},
};
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
static struct clk_regmap axg_pcie_pll_od = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_PCIE_PLL_CNTL,
.shift = 16,
.width = 2,
.flags = CLK_DIVIDER_POWER_OF_TWO,
},
.hw.init = &(struct clk_init_data){
.name = "pcie_pll_od",
.ops = &clk_regmap_divider_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_pcie_pll_dco.hw
},
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap axg_pcie_pll = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_PCIE_PLL_CNTL6,
.shift = 6,
.width = 2,
.flags = CLK_DIVIDER_POWER_OF_TWO,
},
.hw.init = &(struct clk_init_data){
.name = "pcie_pll",
.ops = &clk_regmap_divider_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_pcie_pll_od.hw
},
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
static struct clk_regmap axg_pcie_mux = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_PCIE_PLL_CNTL6,
.mask = 0x1,
.shift = 2,
clk: meson-axg: pcie: drop the mpll3 clock parent We found the PCIe driver doesn't really work with the mpll3 clock which is actually reserved for debug, So drop it from the mux list. Fixes: 33b89db68236 ("clk: meson-axg: add clocks required by pcie driver") Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 20:16:24 +08:00
/* skip the parent mpll3, reserved for debug */
.table = (u32[]){ 1 },
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
},
.hw.init = &(struct clk_init_data){
.name = "pcie_mux",
.ops = &clk_regmap_mux_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) { &axg_pcie_pll.hw },
clk: meson-axg: pcie: drop the mpll3 clock parent We found the PCIe driver doesn't really work with the mpll3 clock which is actually reserved for debug, So drop it from the mux list. Fixes: 33b89db68236 ("clk: meson-axg: add clocks required by pcie driver") Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 20:16:24 +08:00
.num_parents = 1,
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap axg_pcie_ref = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_PCIE_PLL_CNTL6,
.mask = 0x1,
.shift = 1,
/* skip the parent 0, reserved for debug */
.table = (u32[]){ 1 },
},
.hw.init = &(struct clk_init_data){
.name = "pcie_ref",
.ops = &clk_regmap_mux_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) { &axg_pcie_mux.hw },
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap axg_pcie_cml_en0 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_PCIE_PLL_CNTL6,
.bit_idx = 4,
},
.hw.init = &(struct clk_init_data) {
.name = "pcie_cml_en0",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) { &axg_pcie_ref.hw },
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap axg_pcie_cml_en1 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_PCIE_PLL_CNTL6,
.bit_idx = 3,
},
.hw.init = &(struct clk_init_data) {
.name = "pcie_cml_en1",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) { &axg_pcie_ref.hw },
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
static u32 mux_table_clk81[] = { 0, 2, 3, 4, 5, 6, 7 };
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
static const struct clk_parent_data clk81_parent_data[] = {
{ .fw_name = "xtal", },
{ .hw = &axg_fclk_div7.hw },
{ .hw = &axg_mpll1.hw },
{ .hw = &axg_mpll2.hw },
{ .hw = &axg_fclk_div4.hw },
{ .hw = &axg_fclk_div3.hw },
{ .hw = &axg_fclk_div5.hw },
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
};
clk: meson: migrate muxes to clk_regmap Move meson8b, gxbb and axg clocks using clk_mux to clk_regmap Also remove a few useless tables in the process Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:38 +08:00
static struct clk_regmap axg_mpeg_clk_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_MPEG_CLK_CNTL,
.mask = 0x7,
.shift = 12,
.table = mux_table_clk81,
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_sel",
clk: meson: migrate muxes to clk_regmap Move meson8b, gxbb and axg clocks using clk_mux to clk_regmap Also remove a few useless tables in the process Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:38 +08:00
.ops = &clk_regmap_mux_ro_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_data = clk81_parent_data,
.num_parents = ARRAY_SIZE(clk81_parent_data),
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
},
};
clk: meson: migrate dividers to clk_regmap Move meson8b, gxbb and axg clocks using clk_divider to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:37 +08:00
static struct clk_regmap axg_mpeg_clk_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_MPEG_CLK_CNTL,
.shift = 0,
.width = 7,
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data){
.name = "mpeg_clk_div",
clk: meson: migrate dividers to clk_regmap Move meson8b, gxbb and axg clocks using clk_divider to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:37 +08:00
.ops = &clk_regmap_divider_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_mpeg_clk_sel.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: migrate gates to clk_regmap Move meson8b, gxbb and axg clocks using clk_gate to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:36 +08:00
static struct clk_regmap axg_clk81 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_MPEG_CLK_CNTL,
.bit_idx = 7,
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data){
.name = "clk81",
clk: meson: migrate gates to clk_regmap Move meson8b, gxbb and axg clocks using clk_gate to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:36 +08:00
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_mpeg_clk_div.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
.flags = (CLK_SET_RATE_PARENT | CLK_IS_CRITICAL),
},
};
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
static const struct clk_parent_data axg_sd_emmc_clk0_parent_data[] = {
{ .fw_name = "xtal", },
{ .hw = &axg_fclk_div2.hw },
{ .hw = &axg_fclk_div3.hw },
{ .hw = &axg_fclk_div5.hw },
{ .hw = &axg_fclk_div7.hw },
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
/*
* Following these parent clocks, we should also have had mpll2, mpll3
* and gp0_pll but these clocks are too precious to be used here. All
* the necessary rates for MMC and NAND operation can be acheived using
* xtal or fclk_div clocks
*/
};
/* SDcard clock */
clk: meson: migrate muxes to clk_regmap Move meson8b, gxbb and axg clocks using clk_mux to clk_regmap Also remove a few useless tables in the process Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:38 +08:00
static struct clk_regmap axg_sd_emmc_b_clk0_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_SD_EMMC_CLK_CNTL,
.mask = 0x7,
.shift = 25,
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_sel",
clk: meson: migrate muxes to clk_regmap Move meson8b, gxbb and axg clocks using clk_mux to clk_regmap Also remove a few useless tables in the process Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:38 +08:00
.ops = &clk_regmap_mux_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_data = axg_sd_emmc_clk0_parent_data,
.num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_data),
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: migrate dividers to clk_regmap Move meson8b, gxbb and axg clocks using clk_divider to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:37 +08:00
static struct clk_regmap axg_sd_emmc_b_clk0_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_SD_EMMC_CLK_CNTL,
.shift = 16,
.width = 7,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_b_clk0_div",
clk: meson: migrate dividers to clk_regmap Move meson8b, gxbb and axg clocks using clk_divider to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:37 +08:00
.ops = &clk_regmap_divider_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_sd_emmc_b_clk0_sel.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: migrate gates to clk_regmap Move meson8b, gxbb and axg clocks using clk_gate to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:36 +08:00
static struct clk_regmap axg_sd_emmc_b_clk0 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_SD_EMMC_CLK_CNTL,
.bit_idx = 23,
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_b_clk0",
clk: meson: migrate gates to clk_regmap Move meson8b, gxbb and axg clocks using clk_gate to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:36 +08:00
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_sd_emmc_b_clk0_div.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
/* EMMC/NAND clock */
clk: meson: migrate muxes to clk_regmap Move meson8b, gxbb and axg clocks using clk_mux to clk_regmap Also remove a few useless tables in the process Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:38 +08:00
static struct clk_regmap axg_sd_emmc_c_clk0_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_NAND_CLK_CNTL,
.mask = 0x7,
.shift = 9,
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_sel",
clk: meson: migrate muxes to clk_regmap Move meson8b, gxbb and axg clocks using clk_mux to clk_regmap Also remove a few useless tables in the process Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:38 +08:00
.ops = &clk_regmap_mux_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_data = axg_sd_emmc_clk0_parent_data,
.num_parents = ARRAY_SIZE(axg_sd_emmc_clk0_parent_data),
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: migrate dividers to clk_regmap Move meson8b, gxbb and axg clocks using clk_divider to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:37 +08:00
static struct clk_regmap axg_sd_emmc_c_clk0_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_NAND_CLK_CNTL,
.shift = 0,
.width = 7,
.flags = CLK_DIVIDER_ROUND_CLOSEST,
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data) {
.name = "sd_emmc_c_clk0_div",
clk: meson: migrate dividers to clk_regmap Move meson8b, gxbb and axg clocks using clk_divider to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:37 +08:00
.ops = &clk_regmap_divider_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_sd_emmc_c_clk0_sel.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: migrate gates to clk_regmap Move meson8b, gxbb and axg clocks using clk_gate to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:36 +08:00
static struct clk_regmap axg_sd_emmc_c_clk0 = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_NAND_CLK_CNTL,
.bit_idx = 7,
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.hw.init = &(struct clk_init_data){
.name = "sd_emmc_c_clk0",
clk: meson: migrate gates to clk_regmap Move meson8b, gxbb and axg clocks using clk_gate to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:36 +08:00
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_sd_emmc_c_clk0_div.hw
},
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: add gen_clk GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-05 00:54:58 +08:00
static u32 mux_table_gen_clk[] = { 0, 4, 5, 6, 7, 8,
9, 10, 11, 13, 14, };
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
static const struct clk_parent_data gen_clk_parent_data[] = {
{ .fw_name = "xtal", },
{ .hw = &axg_hifi_pll.hw },
{ .hw = &axg_mpll0.hw },
{ .hw = &axg_mpll1.hw },
{ .hw = &axg_mpll2.hw },
{ .hw = &axg_mpll3.hw },
{ .hw = &axg_fclk_div4.hw },
{ .hw = &axg_fclk_div3.hw },
{ .hw = &axg_fclk_div5.hw },
{ .hw = &axg_fclk_div7.hw },
{ .hw = &axg_gp0_pll.hw },
clk: meson: add gen_clk GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-05 00:54:58 +08:00
};
static struct clk_regmap axg_gen_clk_sel = {
.data = &(struct clk_regmap_mux_data){
.offset = HHI_GEN_CLK_CNTL,
.mask = 0xf,
.shift = 12,
.table = mux_table_gen_clk,
},
.hw.init = &(struct clk_init_data){
.name = "gen_clk_sel",
.ops = &clk_regmap_mux_ops,
/*
* bits 15:12 selects from 14 possible parents:
* xtal, [rtc_oscin_i], [sys_cpu_div16], [ddr_dpll_pt],
* hifi_pll, mpll0, mpll1, mpll2, mpll3, fdiv4,
* fdiv3, fdiv5, [cts_msr_clk], fdiv7, gp0_pll
*/
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_data = gen_clk_parent_data,
.num_parents = ARRAY_SIZE(gen_clk_parent_data),
clk: meson: add gen_clk GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-05 00:54:58 +08:00
},
};
static struct clk_regmap axg_gen_clk_div = {
.data = &(struct clk_regmap_div_data){
.offset = HHI_GEN_CLK_CNTL,
.shift = 0,
.width = 11,
},
.hw.init = &(struct clk_init_data){
.name = "gen_clk_div",
.ops = &clk_regmap_divider_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_gen_clk_sel.hw
},
clk: meson: add gen_clk GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-05 00:54:58 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
static struct clk_regmap axg_gen_clk = {
.data = &(struct clk_regmap_gate_data){
.offset = HHI_GEN_CLK_CNTL,
.bit_idx = 7,
},
.hw.init = &(struct clk_init_data){
.name = "gen_clk",
.ops = &clk_regmap_gate_ops,
clk: meson: axg: migrate to the new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:34 +08:00
.parent_hws = (const struct clk_hw *[]) {
&axg_gen_clk_div.hw
},
clk: meson: add gen_clk GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-05 00:54:58 +08:00
.num_parents = 1,
.flags = CLK_SET_RATE_PARENT,
},
};
clk: meson: clk-regmap: migrate to new parent description method This clock controller use the string comparison method to describe parent relation between the clocks, which is not optimized. Migrate to the new way by using .parent_hws where possible (ie. when all clocks are local to the controller) and use .parent_data otherwise. Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-26 00:42:36 +08:00
#define MESON_GATE(_name, _reg, _bit) \
MESON_PCLK(_name, _reg, _bit, &axg_clk81.hw)
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
/* Everything Else (EE) domain gates */
static MESON_GATE(axg_ddr, HHI_GCLK_MPEG0, 0);
static MESON_GATE(axg_audio_locker, HHI_GCLK_MPEG0, 2);
static MESON_GATE(axg_mipi_dsi_host, HHI_GCLK_MPEG0, 3);
static MESON_GATE(axg_isa, HHI_GCLK_MPEG0, 5);
static MESON_GATE(axg_pl301, HHI_GCLK_MPEG0, 6);
static MESON_GATE(axg_periphs, HHI_GCLK_MPEG0, 7);
static MESON_GATE(axg_spicc_0, HHI_GCLK_MPEG0, 8);
static MESON_GATE(axg_i2c, HHI_GCLK_MPEG0, 9);
static MESON_GATE(axg_rng0, HHI_GCLK_MPEG0, 12);
static MESON_GATE(axg_uart0, HHI_GCLK_MPEG0, 13);
static MESON_GATE(axg_mipi_dsi_phy, HHI_GCLK_MPEG0, 14);
static MESON_GATE(axg_spicc_1, HHI_GCLK_MPEG0, 15);
static MESON_GATE(axg_pcie_a, HHI_GCLK_MPEG0, 16);
static MESON_GATE(axg_pcie_b, HHI_GCLK_MPEG0, 17);
static MESON_GATE(axg_hiu_reg, HHI_GCLK_MPEG0, 19);
static MESON_GATE(axg_assist_misc, HHI_GCLK_MPEG0, 23);
static MESON_GATE(axg_emmc_b, HHI_GCLK_MPEG0, 25);
static MESON_GATE(axg_emmc_c, HHI_GCLK_MPEG0, 26);
static MESON_GATE(axg_dma, HHI_GCLK_MPEG0, 27);
static MESON_GATE(axg_spi, HHI_GCLK_MPEG0, 30);
static MESON_GATE(axg_audio, HHI_GCLK_MPEG1, 0);
static MESON_GATE(axg_eth_core, HHI_GCLK_MPEG1, 3);
static MESON_GATE(axg_uart1, HHI_GCLK_MPEG1, 16);
static MESON_GATE(axg_g2d, HHI_GCLK_MPEG1, 20);
static MESON_GATE(axg_usb0, HHI_GCLK_MPEG1, 21);
static MESON_GATE(axg_usb1, HHI_GCLK_MPEG1, 22);
static MESON_GATE(axg_reset, HHI_GCLK_MPEG1, 23);
static MESON_GATE(axg_usb_general, HHI_GCLK_MPEG1, 26);
static MESON_GATE(axg_ahb_arb0, HHI_GCLK_MPEG1, 29);
static MESON_GATE(axg_efuse, HHI_GCLK_MPEG1, 30);
static MESON_GATE(axg_boot_rom, HHI_GCLK_MPEG1, 31);
static MESON_GATE(axg_ahb_data_bus, HHI_GCLK_MPEG2, 1);
static MESON_GATE(axg_ahb_ctrl_bus, HHI_GCLK_MPEG2, 2);
static MESON_GATE(axg_usb1_to_ddr, HHI_GCLK_MPEG2, 8);
static MESON_GATE(axg_usb0_to_ddr, HHI_GCLK_MPEG2, 9);
static MESON_GATE(axg_mmc_pclk, HHI_GCLK_MPEG2, 11);
static MESON_GATE(axg_vpu_intr, HHI_GCLK_MPEG2, 25);
static MESON_GATE(axg_sec_ahb_ahb3_bridge, HHI_GCLK_MPEG2, 26);
static MESON_GATE(axg_gic, HHI_GCLK_MPEG2, 30);
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
static MESON_GATE(axg_mipi_enable, HHI_MIPI_CNTL0, 29);
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
/* Always On (AO) domain gates */
static MESON_GATE(axg_ao_media_cpu, HHI_GCLK_AO, 0);
static MESON_GATE(axg_ao_ahb_sram, HHI_GCLK_AO, 1);
static MESON_GATE(axg_ao_ahb_bus, HHI_GCLK_AO, 2);
static MESON_GATE(axg_ao_iface, HHI_GCLK_AO, 3);
static MESON_GATE(axg_ao_i2c, HHI_GCLK_AO, 4);
/* Array of all clocks provided by this provider */
static struct clk_hw_onecell_data axg_hw_onecell_data = {
.hws = {
[CLKID_SYS_PLL] = &axg_sys_pll.hw,
[CLKID_FIXED_PLL] = &axg_fixed_pll.hw,
[CLKID_FCLK_DIV2] = &axg_fclk_div2.hw,
[CLKID_FCLK_DIV3] = &axg_fclk_div3.hw,
[CLKID_FCLK_DIV4] = &axg_fclk_div4.hw,
[CLKID_FCLK_DIV5] = &axg_fclk_div5.hw,
[CLKID_FCLK_DIV7] = &axg_fclk_div7.hw,
[CLKID_GP0_PLL] = &axg_gp0_pll.hw,
[CLKID_MPEG_SEL] = &axg_mpeg_clk_sel.hw,
[CLKID_MPEG_DIV] = &axg_mpeg_clk_div.hw,
[CLKID_CLK81] = &axg_clk81.hw,
[CLKID_MPLL0] = &axg_mpll0.hw,
[CLKID_MPLL1] = &axg_mpll1.hw,
[CLKID_MPLL2] = &axg_mpll2.hw,
[CLKID_MPLL3] = &axg_mpll3.hw,
[CLKID_DDR] = &axg_ddr.hw,
[CLKID_AUDIO_LOCKER] = &axg_audio_locker.hw,
[CLKID_MIPI_DSI_HOST] = &axg_mipi_dsi_host.hw,
[CLKID_ISA] = &axg_isa.hw,
[CLKID_PL301] = &axg_pl301.hw,
[CLKID_PERIPHS] = &axg_periphs.hw,
[CLKID_SPICC0] = &axg_spicc_0.hw,
[CLKID_I2C] = &axg_i2c.hw,
[CLKID_RNG0] = &axg_rng0.hw,
[CLKID_UART0] = &axg_uart0.hw,
[CLKID_MIPI_DSI_PHY] = &axg_mipi_dsi_phy.hw,
[CLKID_SPICC1] = &axg_spicc_1.hw,
[CLKID_PCIE_A] = &axg_pcie_a.hw,
[CLKID_PCIE_B] = &axg_pcie_b.hw,
[CLKID_HIU_IFACE] = &axg_hiu_reg.hw,
[CLKID_ASSIST_MISC] = &axg_assist_misc.hw,
[CLKID_SD_EMMC_B] = &axg_emmc_b.hw,
[CLKID_SD_EMMC_C] = &axg_emmc_c.hw,
[CLKID_DMA] = &axg_dma.hw,
[CLKID_SPI] = &axg_spi.hw,
[CLKID_AUDIO] = &axg_audio.hw,
[CLKID_ETH] = &axg_eth_core.hw,
[CLKID_UART1] = &axg_uart1.hw,
[CLKID_G2D] = &axg_g2d.hw,
[CLKID_USB0] = &axg_usb0.hw,
[CLKID_USB1] = &axg_usb1.hw,
[CLKID_RESET] = &axg_reset.hw,
[CLKID_USB] = &axg_usb_general.hw,
[CLKID_AHB_ARB0] = &axg_ahb_arb0.hw,
[CLKID_EFUSE] = &axg_efuse.hw,
[CLKID_BOOT_ROM] = &axg_boot_rom.hw,
[CLKID_AHB_DATA_BUS] = &axg_ahb_data_bus.hw,
[CLKID_AHB_CTRL_BUS] = &axg_ahb_ctrl_bus.hw,
[CLKID_USB1_DDR_BRIDGE] = &axg_usb1_to_ddr.hw,
[CLKID_USB0_DDR_BRIDGE] = &axg_usb0_to_ddr.hw,
[CLKID_MMC_PCLK] = &axg_mmc_pclk.hw,
[CLKID_VPU_INTR] = &axg_vpu_intr.hw,
[CLKID_SEC_AHB_AHB3_BRIDGE] = &axg_sec_ahb_ahb3_bridge.hw,
[CLKID_GIC] = &axg_gic.hw,
[CLKID_AO_MEDIA_CPU] = &axg_ao_media_cpu.hw,
[CLKID_AO_AHB_SRAM] = &axg_ao_ahb_sram.hw,
[CLKID_AO_AHB_BUS] = &axg_ao_ahb_bus.hw,
[CLKID_AO_IFACE] = &axg_ao_iface.hw,
[CLKID_AO_I2C] = &axg_ao_i2c.hw,
[CLKID_SD_EMMC_B_CLK0_SEL] = &axg_sd_emmc_b_clk0_sel.hw,
[CLKID_SD_EMMC_B_CLK0_DIV] = &axg_sd_emmc_b_clk0_div.hw,
[CLKID_SD_EMMC_B_CLK0] = &axg_sd_emmc_b_clk0.hw,
[CLKID_SD_EMMC_C_CLK0_SEL] = &axg_sd_emmc_c_clk0_sel.hw,
[CLKID_SD_EMMC_C_CLK0_DIV] = &axg_sd_emmc_c_clk0_div.hw,
[CLKID_SD_EMMC_C_CLK0] = &axg_sd_emmc_c_clk0.hw,
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
[CLKID_MPLL0_DIV] = &axg_mpll0_div.hw,
[CLKID_MPLL1_DIV] = &axg_mpll1_div.hw,
[CLKID_MPLL2_DIV] = &axg_mpll2_div.hw,
[CLKID_MPLL3_DIV] = &axg_mpll3_div.hw,
clk: meson: axg: add hifi pll clock Add the hifi pll to the axg clock controller. This clock maybe used as an input of the axg audio clock controller. It uses the same settings table as the gp0 pll but has a frac parameter allowing more precision. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:43 +08:00
[CLKID_HIFI_PLL] = &axg_hifi_pll.hw,
clk: meson: add mpll pre-divider mpll clocks parent can actually be divided by 1 or 2. So far, this divider has always been set to 1, so the calculation was correct. Now that we know it exists, model the tree correctly. If we ever get a platform where the divider is different, we won't get into trouble Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:44 +08:00
[CLKID_MPLL_PREDIV] = &axg_mpll_prediv.hw,
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
[CLKID_FCLK_DIV2_DIV] = &axg_fclk_div2_div.hw,
[CLKID_FCLK_DIV3_DIV] = &axg_fclk_div3_div.hw,
[CLKID_FCLK_DIV4_DIV] = &axg_fclk_div4_div.hw,
[CLKID_FCLK_DIV5_DIV] = &axg_fclk_div5_div.hw,
[CLKID_FCLK_DIV7_DIV] = &axg_fclk_div7_div.hw,
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
[CLKID_PCIE_PLL] = &axg_pcie_pll.hw,
[CLKID_PCIE_MUX] = &axg_pcie_mux.hw,
[CLKID_PCIE_REF] = &axg_pcie_ref.hw,
[CLKID_PCIE_CML_EN0] = &axg_pcie_cml_en0.hw,
[CLKID_PCIE_CML_EN1] = &axg_pcie_cml_en1.hw,
[CLKID_MIPI_ENABLE] = &axg_mipi_enable.hw,
clk: meson: add gen_clk GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-05 00:54:58 +08:00
[CLKID_GEN_CLK_SEL] = &axg_gen_clk_sel.hw,
[CLKID_GEN_CLK_DIV] = &axg_gen_clk_div.hw,
[CLKID_GEN_CLK] = &axg_gen_clk.hw,
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
[CLKID_SYS_PLL_DCO] = &axg_sys_pll_dco.hw,
[CLKID_FIXED_PLL_DCO] = &axg_fixed_pll_dco.hw,
[CLKID_GP0_PLL_DCO] = &axg_gp0_pll_dco.hw,
[CLKID_HIFI_PLL_DCO] = &axg_hifi_pll_dco.hw,
[CLKID_PCIE_PLL_DCO] = &axg_pcie_pll_dco.hw,
[CLKID_PCIE_PLL_OD] = &axg_pcie_pll_od.hw,
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
};
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
/* Convenience table to populate regmap in .probe */
clk: meson: migrate gates to clk_regmap Move meson8b, gxbb and axg clocks using clk_gate to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:36 +08:00
static struct clk_regmap *const axg_clk_regmaps[] = {
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
&axg_clk81,
&axg_ddr,
&axg_audio_locker,
&axg_mipi_dsi_host,
&axg_isa,
&axg_pl301,
&axg_periphs,
&axg_spicc_0,
&axg_i2c,
&axg_rng0,
&axg_uart0,
&axg_mipi_dsi_phy,
&axg_spicc_1,
&axg_pcie_a,
&axg_pcie_b,
&axg_hiu_reg,
&axg_assist_misc,
&axg_emmc_b,
&axg_emmc_c,
&axg_dma,
&axg_spi,
&axg_audio,
&axg_eth_core,
&axg_uart1,
&axg_g2d,
&axg_usb0,
&axg_usb1,
&axg_reset,
&axg_usb_general,
&axg_ahb_arb0,
&axg_efuse,
&axg_boot_rom,
&axg_ahb_data_bus,
&axg_ahb_ctrl_bus,
&axg_usb1_to_ddr,
&axg_usb0_to_ddr,
&axg_mmc_pclk,
&axg_vpu_intr,
&axg_sec_ahb_ahb3_bridge,
&axg_gic,
&axg_ao_media_cpu,
&axg_ao_ahb_sram,
&axg_ao_ahb_bus,
&axg_ao_iface,
&axg_ao_i2c,
&axg_sd_emmc_b_clk0,
&axg_sd_emmc_c_clk0,
clk: meson: migrate dividers to clk_regmap Move meson8b, gxbb and axg clocks using clk_divider to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:37 +08:00
&axg_mpeg_clk_div,
&axg_sd_emmc_b_clk0_div,
&axg_sd_emmc_c_clk0_div,
clk: meson: migrate muxes to clk_regmap Move meson8b, gxbb and axg clocks using clk_mux to clk_regmap Also remove a few useless tables in the process Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:38 +08:00
&axg_mpeg_clk_sel,
&axg_sd_emmc_b_clk0_sel,
&axg_sd_emmc_c_clk0_sel,
clk: meson: migrate mplls clocks to clk_regmap Rework meson mpll driver to use clk_regmap and move meson8b, gxbb and axg clocks using meson_clk_mpll to clk_regmap Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:40 +08:00
&axg_mpll0,
&axg_mpll1,
&axg_mpll2,
&axg_mpll3,
clk: meson: split divider and gate part of mpll The mpll clock is a kind of fractional divider which can gate. When the RW operation have been added, enable/disable ops have been mistakenly inserted in this driver. These ops are essentially a poor copy/paste of the generic gate ops. This change removes the gate ops from the mpll driver and inserts a generic gate clock on each mpll divider, simplifying the mpll driver and reducing code duplication. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:43 +08:00
&axg_mpll0_div,
&axg_mpll1_div,
&axg_mpll2_div,
&axg_mpll3_div,
clk: meson: migrate plls clocks to clk_regmap Rework meson pll driver to use clk_regmap and move meson8b, gxbb and axg's clock using meson_clk_pll to clk_regmap. This rework is not just about clk_regmap, there a serious clean-up of the driver code: * Add lock and reset field: Previously inferred from the n field. * Simplify the reset logic: Code seemed to apply reset differently but in fact it was always the same -> assert reset, apply params, de-assert reset. The 2 lock checking loops have been kept for now, as they seem to be necessary. * Do the sequence of init register pokes only at .init() instead of in .set_rate(). Redoing the init on every set_rate() is not necessary Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-12 22:58:42 +08:00
&axg_fixed_pll,
&axg_sys_pll,
&axg_gp0_pll,
clk: meson: axg: add hifi pll clock Add the hifi pll to the axg clock controller. This clock maybe used as an input of the axg audio clock controller. It uses the same settings table as the gp0 pll but has a frac parameter allowing more precision. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:43 +08:00
&axg_hifi_pll,
clk: meson: add mpll pre-divider mpll clocks parent can actually be divided by 1 or 2. So far, this divider has always been set to 1, so the calculation was correct. Now that we know it exists, model the tree correctly. If we ever get a platform where the divider is different, we won't get into trouble Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:44 +08:00
&axg_mpll_prediv,
clk: meson: add fdiv clock gates Fdiv fixed dividers clocks of the fixed_pll can actually gate independently. We never had an issue so far because these clocks were provided 'enabled' by the bootloader. Add these gates to enable/disable the clocks when required. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2018-02-19 19:21:45 +08:00
&axg_fclk_div2,
&axg_fclk_div3,
&axg_fclk_div4,
&axg_fclk_div5,
&axg_fclk_div7,
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
&axg_pcie_pll_dco,
&axg_pcie_pll_od,
clk: meson-axg: add clocks required by pcie driver Adding clocks for the pcie driver. Due to the ASIC design, the pcie controller re-use part of the mipi clock logic, so the mipi clock is also added. Tested-by: Jianxin Qin <jianxin.qin@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> [amended to remove unnecessary locales] Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-03 05:31:18 +08:00
&axg_pcie_pll,
&axg_pcie_mux,
&axg_pcie_ref,
&axg_pcie_cml_en0,
&axg_pcie_cml_en1,
&axg_mipi_enable,
clk: meson: add gen_clk GEN_CLK is able to route several internal clocks to one of the SoC pads. In the future, even more clocks could be made accessible using cts_msr_clk - the clock measure block. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-07-05 00:54:58 +08:00
&axg_gen_clk_sel,
&axg_gen_clk_div,
&axg_gen_clk,
clk: meson: clk-pll: remove od parameters Remove od parameters from pll clocks and add post dividers clocks instead. Some clock, especially the one which feature several ods, may provide output between those ods. Also, some drivers, such as the hdmi driver, may require a more detailed control of the clock dividers, compared to what CCF would perform automatically. One added benefit of removing ods is that it also greatly reduce the size of the rate parameter tables. In the future, we could possibly take the predivider 'n' out of this driver as well. To do so, we will need to understand the constraints for the PLL to lock and whether or not it depends on the input clock rate. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2018-08-01 22:00:52 +08:00
&axg_fixed_pll_dco,
&axg_sys_pll_dco,
&axg_gp0_pll_dco,
&axg_hifi_pll_dco,
&axg_pcie_pll_dco,
&axg_pcie_pll_od,
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
};
clk: meson: factorise meson64 peripheral clock controller drivers The function used to probe the peripheral clock controller of the arm64 amlogic SoCs is mostly the same. We now have 3 of those controllers so it is time to factorize things a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
2019-02-01 22:53:45 +08:00
static const struct meson_eeclkc_data axg_clkc_data = {
.regmap_clks = axg_clk_regmaps,
.regmap_clk_num = ARRAY_SIZE(axg_clk_regmaps),
.hw_onecell_data = &axg_hw_onecell_data,
};
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
static const struct of_device_id clkc_match_table[] = {
clk: meson: factorise meson64 peripheral clock controller drivers The function used to probe the peripheral clock controller of the arm64 amlogic SoCs is mostly the same. We now have 3 of those controllers so it is time to factorize things a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
2019-02-01 22:53:45 +08:00
{ .compatible = "amlogic,axg-clkc", .data = &axg_clkc_data },
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
{}
};
static struct platform_driver axg_driver = {
clk: meson: factorise meson64 peripheral clock controller drivers The function used to probe the peripheral clock controller of the arm64 amlogic SoCs is mostly the same. We now have 3 of those controllers so it is time to factorize things a bit. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lkml.kernel.org/r/20190201145345.6795-5-jbrunet@baylibre.com
2019-02-01 22:53:45 +08:00
.probe = meson_eeclkc_probe,
clk: meson-axg: add clock controller drivers Add clock controller drivers for Amlogic Meson-AXG SoC. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2017-12-11 22:13:46 +08:00
.driver = {
.name = "axg-clkc",
.of_match_table = clkc_match_table,
},
};
builtin_platform_driver(axg_driver);