OpenCloudOS-Kernel/arch/x86/kernel/dumpstack.c

425 lines
12 KiB
C
Raw Permalink Normal View History

/*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
*/
#include <linux/kallsyms.h>
#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <linux/utsname.h>
#include <linux/hardirq.h>
#include <linux/kdebug.h>
#include <linux/module.h>
#include <linux/ptrace.h>
#include <linux/sched/debug.h>
#include <linux/sched/task_stack.h>
#include <linux/ftrace.h>
#include <linux/kexec.h>
#include <linux/bug.h>
#include <linux/nmi.h>
#include <linux/sysfs.h>
#include <linux/kasan.h>
#include <asm/cpu_entry_area.h>
#include <asm/stacktrace.h>
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
#include <asm/unwind.h>
int panic_on_unrecovered_nmi;
int panic_on_io_nmi;
static int die_counter;
static struct pt_regs exec_summary_regs;
bool in_task_stack(unsigned long *stack, struct task_struct *task,
struct stack_info *info)
{
unsigned long *begin = task_stack_page(task);
unsigned long *end = task_stack_page(task) + THREAD_SIZE;
if (stack < begin || stack >= end)
return false;
info->type = STACK_TYPE_TASK;
info->begin = begin;
info->end = end;
info->next_sp = NULL;
return true;
}
bool in_entry_stack(unsigned long *stack, struct stack_info *info)
x86/dumpstack: Add get_stack_info() support for the SYSENTER stack get_stack_info() doesn't currently know about the SYSENTER stack, so unwinding will fail if we entered the kernel on the SYSENTER stack and haven't fully switched off. Teach get_stack_info() about the SYSENTER stack. With future patches applied that run part of the entry code on the SYSENTER stack and introduce an intentional BUG(), I would get: PANIC: double fault, error_code: 0x0 ... RIP: 0010:do_error_trap+0x33/0x1c0 ... Call Trace: Code: ... With this patch, I get: PANIC: double fault, error_code: 0x0 ... Call Trace: <SYSENTER> ? async_page_fault+0x36/0x60 ? invalid_op+0x22/0x40 ? async_page_fault+0x36/0x60 ? sync_regs+0x3c/0x40 ? sync_regs+0x2e/0x40 ? error_entry+0x6c/0xd0 ? async_page_fault+0x36/0x60 </SYSENTER> Code: ... which is a lot more informative. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.392711508@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:13 +08:00
{
struct entry_stack *ss = cpu_entry_stack(smp_processor_id());
x86/dumpstack: Add get_stack_info() support for the SYSENTER stack get_stack_info() doesn't currently know about the SYSENTER stack, so unwinding will fail if we entered the kernel on the SYSENTER stack and haven't fully switched off. Teach get_stack_info() about the SYSENTER stack. With future patches applied that run part of the entry code on the SYSENTER stack and introduce an intentional BUG(), I would get: PANIC: double fault, error_code: 0x0 ... RIP: 0010:do_error_trap+0x33/0x1c0 ... Call Trace: Code: ... With this patch, I get: PANIC: double fault, error_code: 0x0 ... Call Trace: <SYSENTER> ? async_page_fault+0x36/0x60 ? invalid_op+0x22/0x40 ? async_page_fault+0x36/0x60 ? sync_regs+0x3c/0x40 ? sync_regs+0x2e/0x40 ? error_entry+0x6c/0xd0 ? async_page_fault+0x36/0x60 </SYSENTER> Code: ... which is a lot more informative. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.392711508@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:13 +08:00
void *begin = ss;
void *end = ss + 1;
x86/dumpstack: Add get_stack_info() support for the SYSENTER stack get_stack_info() doesn't currently know about the SYSENTER stack, so unwinding will fail if we entered the kernel on the SYSENTER stack and haven't fully switched off. Teach get_stack_info() about the SYSENTER stack. With future patches applied that run part of the entry code on the SYSENTER stack and introduce an intentional BUG(), I would get: PANIC: double fault, error_code: 0x0 ... RIP: 0010:do_error_trap+0x33/0x1c0 ... Call Trace: Code: ... With this patch, I get: PANIC: double fault, error_code: 0x0 ... Call Trace: <SYSENTER> ? async_page_fault+0x36/0x60 ? invalid_op+0x22/0x40 ? async_page_fault+0x36/0x60 ? sync_regs+0x3c/0x40 ? sync_regs+0x2e/0x40 ? error_entry+0x6c/0xd0 ? async_page_fault+0x36/0x60 </SYSENTER> Code: ... which is a lot more informative. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.392711508@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:13 +08:00
if ((void *)stack < begin || (void *)stack >= end)
return false;
info->type = STACK_TYPE_ENTRY;
x86/dumpstack: Add get_stack_info() support for the SYSENTER stack get_stack_info() doesn't currently know about the SYSENTER stack, so unwinding will fail if we entered the kernel on the SYSENTER stack and haven't fully switched off. Teach get_stack_info() about the SYSENTER stack. With future patches applied that run part of the entry code on the SYSENTER stack and introduce an intentional BUG(), I would get: PANIC: double fault, error_code: 0x0 ... RIP: 0010:do_error_trap+0x33/0x1c0 ... Call Trace: Code: ... With this patch, I get: PANIC: double fault, error_code: 0x0 ... Call Trace: <SYSENTER> ? async_page_fault+0x36/0x60 ? invalid_op+0x22/0x40 ? async_page_fault+0x36/0x60 ? sync_regs+0x3c/0x40 ? sync_regs+0x2e/0x40 ? error_entry+0x6c/0xd0 ? async_page_fault+0x36/0x60 </SYSENTER> Code: ... which is a lot more informative. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bp@suse.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Borislav Petkov <bpetkov@suse.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.392711508@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:13 +08:00
info->begin = begin;
info->end = end;
info->next_sp = NULL;
return true;
}
static void printk_stack_address(unsigned long address, int reliable,
char *log_lvl)
{
touch_nmi_watchdog();
x86/dumpstack: Remove kernel text addresses from stack dump Printing kernel text addresses in stack dumps is of questionable value, especially now that address randomization is becoming common. It can be a security issue because it leaks kernel addresses. It also affects the usefulness of the stack dump. Linus says: "I actually spend time cleaning up commit messages in logs, because useless data that isn't actually information (random hex numbers) is actively detrimental. It makes commit logs less legible. It also makes it harder to parse dumps. It's not useful. That makes it actively bad. I probably look at more oops reports than most people. I have not found the hex numbers useful for the last five years, because they are just randomized crap. The stack content thing just makes code scroll off the screen etc, for example." The only real downside to removing these addresses is that they can be used to disambiguate duplicate symbol names. However such cases are rare, and the context of the stack dump should be enough to be able to figure it out. There's now a 'faddr2line' script which can be used to convert a function address to a file name and line: $ ./scripts/faddr2line ~/k/vmlinux write_sysrq_trigger+0x51/0x60 write_sysrq_trigger+0x51/0x60: write_sysrq_trigger at drivers/tty/sysrq.c:1098 Or gdb can be used: $ echo "list *write_sysrq_trigger+0x51" |gdb ~/k/vmlinux |grep "is in" (gdb) 0xffffffff815b5d83 is in driver_probe_device (/home/jpoimboe/git/linux/drivers/base/dd.c:378). (But note that when there are duplicate symbol names, gdb will only show the first symbol it finds. faddr2line is recommended over gdb because it handles duplicates and it also does function size checking.) Here's an example of what a stack dump looks like after this change: BUG: unable to handle kernel NULL pointer dereference at (null) IP: sysrq_handle_crash+0x45/0x80 PGD 36bfa067 [ 29.650644] PUD 7aca3067 Oops: 0002 [#1] PREEMPT SMP Modules linked in: ... CPU: 1 PID: 786 Comm: bash Tainted: G E 4.9.0-rc1+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 task: ffff880078582a40 task.stack: ffffc90000ba8000 RIP: 0010:sysrq_handle_crash+0x45/0x80 RSP: 0018:ffffc90000babdc8 EFLAGS: 00010296 RAX: ffff880078582a40 RBX: 0000000000000063 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000292 RBP: ffffc90000babdc8 R08: 0000000b31866061 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000007 R14: ffffffff81ee8680 R15: 0000000000000000 FS: 00007ffb43869700(0000) GS:ffff88007d400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000007a3e9000 CR4: 00000000001406e0 Stack: ffffc90000babe00 ffffffff81572d08 ffffffff81572bd5 0000000000000002 0000000000000000 ffff880079606600 00007ffb4386e000 ffffc90000babe20 ffffffff81573201 ffff880036a3fd00 fffffffffffffffb ffffc90000babe40 Call Trace: __handle_sysrq+0x138/0x220 ? __handle_sysrq+0x5/0x220 write_sysrq_trigger+0x51/0x60 proc_reg_write+0x42/0x70 __vfs_write+0x37/0x140 ? preempt_count_sub+0xa1/0x100 ? __sb_start_write+0xf5/0x210 ? vfs_write+0x183/0x1a0 vfs_write+0xb8/0x1a0 SyS_write+0x58/0xc0 entry_SYSCALL_64_fastpath+0x1f/0xc2 RIP: 0033:0x7ffb42f55940 RSP: 002b:00007ffd33bb6b18 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000046 RCX: 00007ffb42f55940 RDX: 0000000000000002 RSI: 00007ffb4386e000 RDI: 0000000000000001 RBP: 0000000000000011 R08: 00007ffb4321ea40 R09: 00007ffb43869700 R10: 00007ffb43869700 R11: 0000000000000246 R12: 0000000000778a10 R13: 00007ffd33bb5c00 R14: 0000000000000007 R15: 0000000000000010 Code: 34 e8 d0 34 bc ff 48 c7 c2 3b 2b 57 81 be 01 00 00 00 48 c7 c7 e0 dd e5 81 e8 a8 55 ba ff c7 05 0e 3f de 00 01 00 00 00 0f ae f8 <c6> 04 25 00 00 00 00 01 5d c3 e8 4c 49 bc ff 84 c0 75 c3 48 c7 RIP: sysrq_handle_crash+0x45/0x80 RSP: ffffc90000babdc8 CR2: 0000000000000000 Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/69329cb29b8f324bb5fcea14d61d224807fb6488.1477405374.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 22:51:12 +08:00
printk("%s %s%pB\n", log_lvl, reliable ? "" : "? ", (void *)address);
x86/dumpstack: Fix printk_address for direct addresses Consider a kernel crash in a module, simulated the following way: static int my_init(void) { char *map = (void *)0x5; *map = 3; return 0; } module_init(my_init); When we turn off FRAME_POINTERs, the very first instruction in that function causes a BUG. The problem is that we print IP in the BUG report using %pB (from printk_address). And %pB decrements the pointer by one to fix printing addresses of functions with tail calls. This was added in commit 71f9e59800e5ad4 ("x86, dumpstack: Use %pB format specifier for stack trace") to fix the call stack printouts. So instead of correct output: BUG: unable to handle kernel NULL pointer dereference at 0000000000000005 IP: [<ffffffffa01ac000>] my_init+0x0/0x10 [pb173] We get: BUG: unable to handle kernel NULL pointer dereference at 0000000000000005 IP: [<ffffffffa0152000>] 0xffffffffa0151fff To fix that, we use %pS only for stack addresses printouts (via newly added printk_stack_address) and %pB for regs->ip (via printk_address). I.e. we revert to the old behaviour for all except call stacks. And since from all those reliable is 1, we remove that parameter from printk_address. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: joe@perches.com Cc: jirislaby@gmail.com Link: http://lkml.kernel.org/r/1382706418-8435-1-git-send-email-jslaby@suse.cz Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-25 21:06:58 +08:00
}
/*
* There are a couple of reasons for the 2/3rd prologue, courtesy of Linus:
*
* In case where we don't have the exact kernel image (which, if we did, we can
* simply disassemble and navigate to the RIP), the purpose of the bigger
* prologue is to have more context and to be able to correlate the code from
* the different toolchains better.
*
* In addition, it helps in recreating the register allocation of the failing
* kernel and thus make sense of the register dump.
*
* What is more, the additional complication of a variable length insn arch like
* x86 warrants having longer byte sequence before rIP so that the disassembler
* can "sync" up properly and find instruction boundaries when decoding the
* opcode bytes.
*
* Thus, the 2/3rds prologue and 64 byte OPCODE_BUFSIZE is just a random
* guesstimate in attempt to achieve all of the above.
*/
void show_opcodes(struct pt_regs *regs, const char *loglvl)
{
#define PROLOGUE_SIZE 42
#define EPILOGUE_SIZE 21
#define OPCODE_BUFSIZE (PROLOGUE_SIZE + 1 + EPILOGUE_SIZE)
u8 opcodes[OPCODE_BUFSIZE];
unsigned long prologue = regs->ip - PROLOGUE_SIZE;
bool bad_ip;
/*
* Make sure userspace isn't trying to trick us into dumping kernel
* memory by pointing the userspace instruction pointer at it.
*/
bad_ip = user_mode(regs) &&
__chk_range_not_ok(prologue, OPCODE_BUFSIZE, TASK_SIZE_MAX);
if (bad_ip || probe_kernel_read(opcodes, (u8 *)prologue,
OPCODE_BUFSIZE)) {
printk("%sCode: Bad RIP value.\n", loglvl);
} else {
printk("%sCode: %" __stringify(PROLOGUE_SIZE) "ph <%02x> %"
__stringify(EPILOGUE_SIZE) "ph\n", loglvl, opcodes,
opcodes[PROLOGUE_SIZE], opcodes + PROLOGUE_SIZE + 1);
}
}
void show_ip(struct pt_regs *regs, const char *loglvl)
{
#ifdef CONFIG_X86_32
printk("%sEIP: %pS\n", loglvl, (void *)regs->ip);
#else
printk("%sRIP: %04x:%pS\n", loglvl, (int)regs->cs, (void *)regs->ip);
#endif
show_opcodes(regs, loglvl);
}
x86/unwinder: Handle stack overflows more gracefully There are at least two unwinder bugs hindering the debugging of stack-overflow crashes: - It doesn't deal gracefully with the case where the stack overflows and the stack pointer itself isn't on a valid stack but the to-be-dereferenced data *is*. - The ORC oops dump code doesn't know how to print partial pt_regs, for the case where if we get an interrupt/exception in *early* entry code before the full pt_regs have been saved. Fix both issues. http://lkml.kernel.org/r/20171126024031.uxi4numpbjm5rlbr@treble Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bpetkov@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.071425003@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:09 +08:00
void show_iret_regs(struct pt_regs *regs)
{
show_ip(regs, KERN_DEFAULT);
x86/unwinder: Handle stack overflows more gracefully There are at least two unwinder bugs hindering the debugging of stack-overflow crashes: - It doesn't deal gracefully with the case where the stack overflows and the stack pointer itself isn't on a valid stack but the to-be-dereferenced data *is*. - The ORC oops dump code doesn't know how to print partial pt_regs, for the case where if we get an interrupt/exception in *early* entry code before the full pt_regs have been saved. Fix both issues. http://lkml.kernel.org/r/20171126024031.uxi4numpbjm5rlbr@treble Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bpetkov@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.071425003@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:09 +08:00
printk(KERN_DEFAULT "RSP: %04x:%016lx EFLAGS: %08lx", (int)regs->ss,
regs->sp, regs->flags);
}
static void show_regs_if_on_stack(struct stack_info *info, struct pt_regs *regs,
bool partial)
x86/unwinder: Handle stack overflows more gracefully There are at least two unwinder bugs hindering the debugging of stack-overflow crashes: - It doesn't deal gracefully with the case where the stack overflows and the stack pointer itself isn't on a valid stack but the to-be-dereferenced data *is*. - The ORC oops dump code doesn't know how to print partial pt_regs, for the case where if we get an interrupt/exception in *early* entry code before the full pt_regs have been saved. Fix both issues. http://lkml.kernel.org/r/20171126024031.uxi4numpbjm5rlbr@treble Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bpetkov@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.071425003@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:09 +08:00
{
/*
* These on_stack() checks aren't strictly necessary: the unwind code
* has already validated the 'regs' pointer. The checks are done for
* ordering reasons: if the registers are on the next stack, we don't
* want to print them out yet. Otherwise they'll be shown as part of
* the wrong stack. Later, when show_trace_log_lvl() switches to the
* next stack, this function will be called again with the same regs so
* they can be printed in the right context.
*/
if (!partial && on_stack(info, regs, sizeof(*regs))) {
__show_regs(regs, SHOW_REGS_SHORT);
} else if (partial && on_stack(info, (void *)regs + IRET_FRAME_OFFSET,
IRET_FRAME_SIZE)) {
x86/unwinder: Handle stack overflows more gracefully There are at least two unwinder bugs hindering the debugging of stack-overflow crashes: - It doesn't deal gracefully with the case where the stack overflows and the stack pointer itself isn't on a valid stack but the to-be-dereferenced data *is*. - The ORC oops dump code doesn't know how to print partial pt_regs, for the case where if we get an interrupt/exception in *early* entry code before the full pt_regs have been saved. Fix both issues. http://lkml.kernel.org/r/20171126024031.uxi4numpbjm5rlbr@treble Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bpetkov@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.071425003@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:09 +08:00
/*
* When an interrupt or exception occurs in entry code, the
* full pt_regs might not have been saved yet. In that case
* just print the iret frame.
*/
show_iret_regs(regs);
}
}
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
unsigned long *stack, char *log_lvl)
{
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
struct unwind_state state;
struct stack_info stack_info = {0};
unsigned long visit_mask = 0;
int graph_idx = 0;
bool partial = false;
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
printk("%sCall Trace:\n", log_lvl);
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
unwind_start(&state, task, regs, stack);
stack = stack ? : get_stack_pointer(task, regs);
regs = unwind_get_entry_regs(&state, &partial);
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
/*
* Iterate through the stacks, starting with the current stack pointer.
* Each stack has a pointer to the next one.
*
* x86-64 can have several stacks:
* - task stack
* - interrupt stack
* - HW exception stacks (double fault, nmi, debug, mce)
* - entry stack
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
*
* x86-32 can have up to four stacks:
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
* - task stack
* - softirq stack
* - hardirq stack
* - entry stack
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
*/
for ( ; stack; stack = PTR_ALIGN(stack_info.next_sp, sizeof(long))) {
const char *stack_name;
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
if (get_stack_info(stack, task, &stack_info, &visit_mask)) {
/*
* We weren't on a valid stack. It's possible that
* we overflowed a valid stack into a guard page.
* See if the next page up is valid so that we can
* generate some kind of backtrace if this happens.
*/
stack = (unsigned long *)PAGE_ALIGN((unsigned long)stack);
if (get_stack_info(stack, task, &stack_info, &visit_mask))
break;
}
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
stack_name = stack_type_name(stack_info.type);
if (stack_name)
printk("%s <%s>\n", log_lvl, stack_name);
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
x86/unwinder: Handle stack overflows more gracefully There are at least two unwinder bugs hindering the debugging of stack-overflow crashes: - It doesn't deal gracefully with the case where the stack overflows and the stack pointer itself isn't on a valid stack but the to-be-dereferenced data *is*. - The ORC oops dump code doesn't know how to print partial pt_regs, for the case where if we get an interrupt/exception in *early* entry code before the full pt_regs have been saved. Fix both issues. http://lkml.kernel.org/r/20171126024031.uxi4numpbjm5rlbr@treble Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bpetkov@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.071425003@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:09 +08:00
if (regs)
show_regs_if_on_stack(&stack_info, regs, partial);
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
/*
* Scan the stack, printing any text addresses we find. At the
* same time, follow proper stack frames with the unwinder.
*
* Addresses found during the scan which are not reported by
* the unwinder are considered to be additional clues which are
* sometimes useful for debugging and are prefixed with '?'.
* This also serves as a failsafe option in case the unwinder
* goes off in the weeds.
*/
for (; stack < stack_info.end; stack++) {
unsigned long real_addr;
int reliable = 0;
unsigned long addr = READ_ONCE_NOCHECK(*stack);
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
unsigned long *ret_addr_p =
unwind_get_return_address_ptr(&state);
if (!__kernel_text_address(addr))
continue;
x86/dumpstack: Print any pt_regs found on the stack Now that we can find pt_regs registers on the stack, print them. Here's an example of what it looks like: Call Trace: <IRQ> [<ffffffff8144b793>] dump_stack+0x86/0xc3 [<ffffffff81142c73>] hrtimer_interrupt+0xb3/0x1c0 [<ffffffff8105eb86>] local_apic_timer_interrupt+0x36/0x60 [<ffffffff818b27cd>] smp_apic_timer_interrupt+0x3d/0x50 [<ffffffff818b06ee>] apic_timer_interrupt+0x9e/0xb0 RIP: 0010:[<ffffffff818aef43>] [<ffffffff818aef43>] _raw_spin_unlock_irq+0x33/0x60 RSP: 0018:ffff880079c4f760 EFLAGS: 00000202 RAX: ffff880078738000 RBX: ffff88007d3da0c0 RCX: 0000000000000007 RDX: 0000000000006d78 RSI: ffff8800787388f0 RDI: ffff880078738000 RBP: ffff880079c4f768 R08: 0000002199088f38 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff81e0d540 R13: ffff8800369fb700 R14: 0000000000000000 R15: ffff880078738000 <EOI> [<ffffffff810e1f14>] finish_task_switch+0xb4/0x250 [<ffffffff810e1ed6>] ? finish_task_switch+0x76/0x250 [<ffffffff818a7b61>] __schedule+0x3e1/0xb20 ... [<ffffffff810759c8>] trace_do_page_fault+0x58/0x2c0 [<ffffffff8106f7dc>] do_async_page_fault+0x2c/0xa0 [<ffffffff818b1dd8>] async_page_fault+0x28/0x30 RIP: 0010:[<ffffffff8145b062>] [<ffffffff8145b062>] __clear_user+0x42/0x70 RSP: 0018:ffff880079c4fd38 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000138 RCX: 0000000000000138 RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000061b640 RBP: ffff880079c4fd48 R08: 0000002198feefd7 R09: ffffffff82a40928 R10: 0000000000000001 R11: 0000000000000000 R12: 000000000061b640 R13: 0000000000000000 R14: ffff880079c50000 R15: ffff8800791d7400 [<ffffffff8145b043>] ? __clear_user+0x23/0x70 [<ffffffff8145b0fb>] clear_user+0x2b/0x40 [<ffffffff812fbda2>] load_elf_binary+0x1472/0x1750 [<ffffffff8129a591>] search_binary_handler+0xa1/0x200 [<ffffffff8129b69b>] do_execveat_common.isra.36+0x6cb/0x9f0 [<ffffffff8129b5f3>] ? do_execveat_common.isra.36+0x623/0x9f0 [<ffffffff8129bcaa>] SyS_execve+0x3a/0x50 [<ffffffff81003f5c>] do_syscall_64+0x6c/0x1e0 [<ffffffff818afa3f>] entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:[<00007fd2e2f2e537>] [<00007fd2e2f2e537>] 0x7fd2e2f2e537 RSP: 002b:00007ffc449c5fc8 EFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007ffc449c8860 RCX: 00007fd2e2f2e537 RDX: 000000000127cc40 RSI: 00007ffc449c8860 RDI: 00007ffc449c6029 RBP: 00007ffc449c60b0 R08: 65726f632d667265 R09: 00007ffc449c5e20 R10: 00000000000005a7 R11: 0000000000000246 R12: 000000000127cc40 R13: 000000000127ce05 R14: 00007ffc449c6029 R15: 000000000127ce01 Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/5cc2c512ec82cfba00dd22467644d4ed751a48c0.1476973742.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-21 00:34:43 +08:00
/*
* Don't print regs->ip again if it was already printed
* by show_regs_if_on_stack().
x86/dumpstack: Print any pt_regs found on the stack Now that we can find pt_regs registers on the stack, print them. Here's an example of what it looks like: Call Trace: <IRQ> [<ffffffff8144b793>] dump_stack+0x86/0xc3 [<ffffffff81142c73>] hrtimer_interrupt+0xb3/0x1c0 [<ffffffff8105eb86>] local_apic_timer_interrupt+0x36/0x60 [<ffffffff818b27cd>] smp_apic_timer_interrupt+0x3d/0x50 [<ffffffff818b06ee>] apic_timer_interrupt+0x9e/0xb0 RIP: 0010:[<ffffffff818aef43>] [<ffffffff818aef43>] _raw_spin_unlock_irq+0x33/0x60 RSP: 0018:ffff880079c4f760 EFLAGS: 00000202 RAX: ffff880078738000 RBX: ffff88007d3da0c0 RCX: 0000000000000007 RDX: 0000000000006d78 RSI: ffff8800787388f0 RDI: ffff880078738000 RBP: ffff880079c4f768 R08: 0000002199088f38 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff81e0d540 R13: ffff8800369fb700 R14: 0000000000000000 R15: ffff880078738000 <EOI> [<ffffffff810e1f14>] finish_task_switch+0xb4/0x250 [<ffffffff810e1ed6>] ? finish_task_switch+0x76/0x250 [<ffffffff818a7b61>] __schedule+0x3e1/0xb20 ... [<ffffffff810759c8>] trace_do_page_fault+0x58/0x2c0 [<ffffffff8106f7dc>] do_async_page_fault+0x2c/0xa0 [<ffffffff818b1dd8>] async_page_fault+0x28/0x30 RIP: 0010:[<ffffffff8145b062>] [<ffffffff8145b062>] __clear_user+0x42/0x70 RSP: 0018:ffff880079c4fd38 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000138 RCX: 0000000000000138 RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000061b640 RBP: ffff880079c4fd48 R08: 0000002198feefd7 R09: ffffffff82a40928 R10: 0000000000000001 R11: 0000000000000000 R12: 000000000061b640 R13: 0000000000000000 R14: ffff880079c50000 R15: ffff8800791d7400 [<ffffffff8145b043>] ? __clear_user+0x23/0x70 [<ffffffff8145b0fb>] clear_user+0x2b/0x40 [<ffffffff812fbda2>] load_elf_binary+0x1472/0x1750 [<ffffffff8129a591>] search_binary_handler+0xa1/0x200 [<ffffffff8129b69b>] do_execveat_common.isra.36+0x6cb/0x9f0 [<ffffffff8129b5f3>] ? do_execveat_common.isra.36+0x623/0x9f0 [<ffffffff8129bcaa>] SyS_execve+0x3a/0x50 [<ffffffff81003f5c>] do_syscall_64+0x6c/0x1e0 [<ffffffff818afa3f>] entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:[<00007fd2e2f2e537>] [<00007fd2e2f2e537>] 0x7fd2e2f2e537 RSP: 002b:00007ffc449c5fc8 EFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007ffc449c8860 RCX: 00007fd2e2f2e537 RDX: 000000000127cc40 RSI: 00007ffc449c8860 RDI: 00007ffc449c6029 RBP: 00007ffc449c60b0 R08: 65726f632d667265 R09: 00007ffc449c5e20 R10: 00000000000005a7 R11: 0000000000000246 R12: 000000000127cc40 R13: 000000000127ce05 R14: 00007ffc449c6029 R15: 000000000127ce01 Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/5cc2c512ec82cfba00dd22467644d4ed751a48c0.1476973742.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-21 00:34:43 +08:00
*/
if (regs && stack == &regs->ip)
goto next;
x86/dumpstack: Print any pt_regs found on the stack Now that we can find pt_regs registers on the stack, print them. Here's an example of what it looks like: Call Trace: <IRQ> [<ffffffff8144b793>] dump_stack+0x86/0xc3 [<ffffffff81142c73>] hrtimer_interrupt+0xb3/0x1c0 [<ffffffff8105eb86>] local_apic_timer_interrupt+0x36/0x60 [<ffffffff818b27cd>] smp_apic_timer_interrupt+0x3d/0x50 [<ffffffff818b06ee>] apic_timer_interrupt+0x9e/0xb0 RIP: 0010:[<ffffffff818aef43>] [<ffffffff818aef43>] _raw_spin_unlock_irq+0x33/0x60 RSP: 0018:ffff880079c4f760 EFLAGS: 00000202 RAX: ffff880078738000 RBX: ffff88007d3da0c0 RCX: 0000000000000007 RDX: 0000000000006d78 RSI: ffff8800787388f0 RDI: ffff880078738000 RBP: ffff880079c4f768 R08: 0000002199088f38 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff81e0d540 R13: ffff8800369fb700 R14: 0000000000000000 R15: ffff880078738000 <EOI> [<ffffffff810e1f14>] finish_task_switch+0xb4/0x250 [<ffffffff810e1ed6>] ? finish_task_switch+0x76/0x250 [<ffffffff818a7b61>] __schedule+0x3e1/0xb20 ... [<ffffffff810759c8>] trace_do_page_fault+0x58/0x2c0 [<ffffffff8106f7dc>] do_async_page_fault+0x2c/0xa0 [<ffffffff818b1dd8>] async_page_fault+0x28/0x30 RIP: 0010:[<ffffffff8145b062>] [<ffffffff8145b062>] __clear_user+0x42/0x70 RSP: 0018:ffff880079c4fd38 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000138 RCX: 0000000000000138 RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000061b640 RBP: ffff880079c4fd48 R08: 0000002198feefd7 R09: ffffffff82a40928 R10: 0000000000000001 R11: 0000000000000000 R12: 000000000061b640 R13: 0000000000000000 R14: ffff880079c50000 R15: ffff8800791d7400 [<ffffffff8145b043>] ? __clear_user+0x23/0x70 [<ffffffff8145b0fb>] clear_user+0x2b/0x40 [<ffffffff812fbda2>] load_elf_binary+0x1472/0x1750 [<ffffffff8129a591>] search_binary_handler+0xa1/0x200 [<ffffffff8129b69b>] do_execveat_common.isra.36+0x6cb/0x9f0 [<ffffffff8129b5f3>] ? do_execveat_common.isra.36+0x623/0x9f0 [<ffffffff8129bcaa>] SyS_execve+0x3a/0x50 [<ffffffff81003f5c>] do_syscall_64+0x6c/0x1e0 [<ffffffff818afa3f>] entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:[<00007fd2e2f2e537>] [<00007fd2e2f2e537>] 0x7fd2e2f2e537 RSP: 002b:00007ffc449c5fc8 EFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007ffc449c8860 RCX: 00007fd2e2f2e537 RDX: 000000000127cc40 RSI: 00007ffc449c8860 RDI: 00007ffc449c6029 RBP: 00007ffc449c60b0 R08: 65726f632d667265 R09: 00007ffc449c5e20 R10: 00000000000005a7 R11: 0000000000000246 R12: 000000000127cc40 R13: 000000000127ce05 R14: 00007ffc449c6029 R15: 000000000127ce01 Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/5cc2c512ec82cfba00dd22467644d4ed751a48c0.1476973742.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-21 00:34:43 +08:00
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
if (stack == ret_addr_p)
reliable = 1;
/*
* When function graph tracing is enabled for a
* function, its return address on the stack is
* replaced with the address of an ftrace handler
* (return_to_handler). In that case, before printing
* the "real" address, we want to print the handler
* address as an "unreliable" hint that function graph
* tracing was involved.
*/
real_addr = ftrace_graph_ret_addr(task, &graph_idx,
addr, stack);
if (real_addr != addr)
printk_stack_address(addr, 0, log_lvl);
printk_stack_address(real_addr, reliable, log_lvl);
if (!reliable)
continue;
next:
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
/*
* Get the next frame from the unwinder. No need to
* check for an error: if anything goes wrong, the rest
* of the addresses will just be printed as unreliable.
*/
unwind_next_frame(&state);
x86/dumpstack: Print any pt_regs found on the stack Now that we can find pt_regs registers on the stack, print them. Here's an example of what it looks like: Call Trace: <IRQ> [<ffffffff8144b793>] dump_stack+0x86/0xc3 [<ffffffff81142c73>] hrtimer_interrupt+0xb3/0x1c0 [<ffffffff8105eb86>] local_apic_timer_interrupt+0x36/0x60 [<ffffffff818b27cd>] smp_apic_timer_interrupt+0x3d/0x50 [<ffffffff818b06ee>] apic_timer_interrupt+0x9e/0xb0 RIP: 0010:[<ffffffff818aef43>] [<ffffffff818aef43>] _raw_spin_unlock_irq+0x33/0x60 RSP: 0018:ffff880079c4f760 EFLAGS: 00000202 RAX: ffff880078738000 RBX: ffff88007d3da0c0 RCX: 0000000000000007 RDX: 0000000000006d78 RSI: ffff8800787388f0 RDI: ffff880078738000 RBP: ffff880079c4f768 R08: 0000002199088f38 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff81e0d540 R13: ffff8800369fb700 R14: 0000000000000000 R15: ffff880078738000 <EOI> [<ffffffff810e1f14>] finish_task_switch+0xb4/0x250 [<ffffffff810e1ed6>] ? finish_task_switch+0x76/0x250 [<ffffffff818a7b61>] __schedule+0x3e1/0xb20 ... [<ffffffff810759c8>] trace_do_page_fault+0x58/0x2c0 [<ffffffff8106f7dc>] do_async_page_fault+0x2c/0xa0 [<ffffffff818b1dd8>] async_page_fault+0x28/0x30 RIP: 0010:[<ffffffff8145b062>] [<ffffffff8145b062>] __clear_user+0x42/0x70 RSP: 0018:ffff880079c4fd38 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000000000138 RCX: 0000000000000138 RDX: 0000000000000000 RSI: 0000000000000008 RDI: 000000000061b640 RBP: ffff880079c4fd48 R08: 0000002198feefd7 R09: ffffffff82a40928 R10: 0000000000000001 R11: 0000000000000000 R12: 000000000061b640 R13: 0000000000000000 R14: ffff880079c50000 R15: ffff8800791d7400 [<ffffffff8145b043>] ? __clear_user+0x23/0x70 [<ffffffff8145b0fb>] clear_user+0x2b/0x40 [<ffffffff812fbda2>] load_elf_binary+0x1472/0x1750 [<ffffffff8129a591>] search_binary_handler+0xa1/0x200 [<ffffffff8129b69b>] do_execveat_common.isra.36+0x6cb/0x9f0 [<ffffffff8129b5f3>] ? do_execveat_common.isra.36+0x623/0x9f0 [<ffffffff8129bcaa>] SyS_execve+0x3a/0x50 [<ffffffff81003f5c>] do_syscall_64+0x6c/0x1e0 [<ffffffff818afa3f>] entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:[<00007fd2e2f2e537>] [<00007fd2e2f2e537>] 0x7fd2e2f2e537 RSP: 002b:00007ffc449c5fc8 EFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007ffc449c8860 RCX: 00007fd2e2f2e537 RDX: 000000000127cc40 RSI: 00007ffc449c8860 RDI: 00007ffc449c6029 RBP: 00007ffc449c60b0 R08: 65726f632d667265 R09: 00007ffc449c5e20 R10: 00000000000005a7 R11: 0000000000000246 R12: 000000000127cc40 R13: 000000000127ce05 R14: 00007ffc449c6029 R15: 000000000127ce01 Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/5cc2c512ec82cfba00dd22467644d4ed751a48c0.1476973742.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-21 00:34:43 +08:00
/* if the frame has entry regs, print them */
regs = unwind_get_entry_regs(&state, &partial);
x86/unwinder: Handle stack overflows more gracefully There are at least two unwinder bugs hindering the debugging of stack-overflow crashes: - It doesn't deal gracefully with the case where the stack overflows and the stack pointer itself isn't on a valid stack but the to-be-dereferenced data *is*. - The ORC oops dump code doesn't know how to print partial pt_regs, for the case where if we get an interrupt/exception in *early* entry code before the full pt_regs have been saved. Fix both issues. http://lkml.kernel.org/r/20171126024031.uxi4numpbjm5rlbr@treble Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Borislav Petkov <bpetkov@suse.de> Cc: Andy Lutomirski <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Eduardo Valentin <eduval@amazon.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: keescook@google.com Link: https://lkml.kernel.org/r/20171204150605.071425003@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-04 22:07:09 +08:00
if (regs)
show_regs_if_on_stack(&stack_info, regs, partial);
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
}
if (stack_name)
printk("%s </%s>\n", log_lvl, stack_name);
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
}
}
void show_stack(struct task_struct *task, unsigned long *sp)
{
task = task ? : current;
x86: don't show trace beyond show_stack(NULL, NULL) There are multiple ways a task can be dumped - explicit call to dump_stack(), triggering WARN() or BUG(), through sysrq-t and so on. Most of what gets printed is upto each architecture and the current state is not particularly pretty. Different pieces of information are presented differently depending on which path the dump takes and which architecture it's running on. This is messy for no good reason and makes it exceedingly difficult to add or modify debug information to task dumps. In all archs except for s390, there's nothing arch-specific about the printed debug information. This patchset updates all those archs to use the same helpers to consistently print out the same debug information. An example WARN dump after this patchset. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #3 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f500 ffffffff82228240 0000000000000040 ffffffff8234a08e 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 [<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a0c3>] init_workqueues+0x35/0x505 ... And BUG dump. kernel BUG at kernel/workqueue.c:4841! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000 RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6 RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650 0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760 Call Trace: [<ffffffff81000312>] do_one_initcall+0x122/0x170 [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8 [<ffffffff81c47760>] ? rest_init+0x140/0x140 [<ffffffff81c4776e>] kernel_init+0xe/0xf0 [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0 [<ffffffff81c47760>] ? rest_init+0x140/0x140 ... This patchset contains the following seven patches. 0001-x86-don-t-show-trace-beyond-show_stack-NULL-NULL.patch 0002-sparc32-make-show_stack-acquire-fp-if-_ksp-is-not-sp.patch 0003-dump_stack-consolidate-dump_stack-implementations-an.patch 0004-dmi-morph-dmi_dump_ids-into-dmi_format_ids-which-for.patch 0005-dump_stack-implement-arch-specific-hardware-descript.patch 0006-dump_stack-unify-debug-information-printed-by-show_r.patch 0007-arc-print-fatal-signals-reduce-duplicated-informatio.patch 0001-0002 update stack dumping functions in x86 and sparc32 in preparation. 0003 makes all arches except blackfin use generic dump_stack(). blackfin still uses the generic helper to print the same info. 0004-0005 properly abstract DMI identifier printing in WARN() and show_regs() so that all dumps print out the information. This enables show_regs() to use the same debug info message. 0006 updates show_regs() of all arches to use a common generic helper to print debug info. 0007 removes somem duplicate information from arc dumps. While this patchset changes how debug info is printed on some archs, the printed information is always superset of what used to be there. This patchset makes task dump debug messages consistent and enables adding more information. Workqueue is scheduled to add worker information including the workqueue in use and work item specific description. While this patch touches a lot of archs, it isn't too likely to cause non-trivial conflicts with arch-specfic changes and would probably be best to route together either through -mm. x86 is tested but other archs are either only compile tested or not tested at all. Changes to most archs are generally trivial. This patch: show_stack(current or NULL, NULL) is used to print the backtrace of the current task. As trace beyond the function itself isn't of much interest to anyone, don't show it by determining sp and bp in show_stack()'s frame and passing them to show_stack_log_lvl(). This brings show_stack(NULL, NULL)'s behavior in line with dump_stack(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 06:27:09 +08:00
/*
* Stack frames below this one aren't interesting. Don't show them
* if we're printing for %current.
*/
x86/dumpstack: Convert show_trace_log_lvl() to use the new unwinder Convert show_trace_log_lvl() to use the new unwinder. dump_trace() has been deprecated. show_trace_log_lvl() is special compared to other users of the unwinder. It's the only place where both reliable *and* unreliable addresses are needed. With frame pointers enabled, most callers of the unwinder don't want to know about unreliable addresses. But in this case, when we're dumping the stack to the console because something presumably went wrong, the unreliable addresses are useful: - They show stale data on the stack which can provide useful clues. - If something goes wrong with the unwinder, or if frame pointers are corrupt or missing, all the stack addresses still get shown. So in order to show all addresses on the stack, and at the same time figure out which addresses are reliable, we have to do the scanning and the unwinding in parallel. The scanning is done with the help of get_stack_info() to traverse the stacks. The unwinding is done separately by the new unwinder. In theory we could simplify show_trace_log_lvl() by instead pushing some of this logic into the unwind code. But then we would need some kind of "fake" frame logic in the unwinder which would add a lot of complexity and wouldn't be worth it in order to support only one user. Another benefit of this approach is that once we have a DWARF unwinder, we should be able to just plug it in with minimal impact to this code. Another change here is that callers of show_trace_log_lvl() don't need to provide the 'bp' argument. The unwinder already finds the relevant frame pointer by unwinding until it reaches the first frame after the provided stack pointer. Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Byungchul Park <byungchul.park@lge.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nilay Vaish <nilayvaish@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/703b5998604c712a1f801874b43f35d6dac52ede.1474045023.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-17 03:18:16 +08:00
if (!sp && task == current)
sp = get_stack_pointer(current, NULL);
x86: don't show trace beyond show_stack(NULL, NULL) There are multiple ways a task can be dumped - explicit call to dump_stack(), triggering WARN() or BUG(), through sysrq-t and so on. Most of what gets printed is upto each architecture and the current state is not particularly pretty. Different pieces of information are presented differently depending on which path the dump takes and which architecture it's running on. This is messy for no good reason and makes it exceedingly difficult to add or modify debug information to task dumps. In all archs except for s390, there's nothing arch-specific about the printed debug information. This patchset updates all those archs to use the same helpers to consistently print out the same debug information. An example WARN dump after this patchset. WARNING: at kernel/workqueue.c:4841 init_workqueues+0x35/0x505() Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #3 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 0000000000000009 ffff88007c861e08 ffffffff81c614dc ffff88007c861e48 ffffffff8108f500 ffffffff82228240 0000000000000040 ffffffff8234a08e 0000000000000000 0000000000000000 0000000000000000 ffff88007c861e58 Call Trace: [<ffffffff81c614dc>] dump_stack+0x19/0x1b [<ffffffff8108f500>] warn_slowpath_common+0x70/0xa0 [<ffffffff8108f54a>] warn_slowpath_null+0x1a/0x20 [<ffffffff8234a0c3>] init_workqueues+0x35/0x505 ... And BUG dump. kernel BUG at kernel/workqueue.c:4841! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.9.0-rc1-work+ #7 Hardware name: empty empty/S3992, BIOS 080011 10/26/2007 task: ffff88007c85e040 ti: ffff88007c860000 task.ti: ffff88007c860000 RIP: 0010:[<ffffffff8234a07e>] [<ffffffff8234a07e>] init_workqueues+0x4/0x6 RSP: 0000:ffff88007c861ec8 EFLAGS: 00010246 RAX: ffff88007c861fd8 RBX: ffffffff824466a8 RCX: 0000000000000001 RDX: 0000000000000046 RSI: 0000000000000001 RDI: ffffffff8234a07a RBP: ffff88007c861ec8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff8234a07a R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88007dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff88015f7ff000 CR3: 00000000021f1000 CR4: 00000000000007f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Stack: ffff88007c861ef8 ffffffff81000312 ffffffff824466a8 ffff88007c85e650 0000000000000003 0000000000000000 ffff88007c861f38 ffffffff82335e5d ffff88007c862080 ffffffff8223d8c0 ffff88007c862080 ffffffff81c47760 Call Trace: [<ffffffff81000312>] do_one_initcall+0x122/0x170 [<ffffffff82335e5d>] kernel_init_freeable+0x9b/0x1c8 [<ffffffff81c47760>] ? rest_init+0x140/0x140 [<ffffffff81c4776e>] kernel_init+0xe/0xf0 [<ffffffff81c6be9c>] ret_from_fork+0x7c/0xb0 [<ffffffff81c47760>] ? rest_init+0x140/0x140 ... This patchset contains the following seven patches. 0001-x86-don-t-show-trace-beyond-show_stack-NULL-NULL.patch 0002-sparc32-make-show_stack-acquire-fp-if-_ksp-is-not-sp.patch 0003-dump_stack-consolidate-dump_stack-implementations-an.patch 0004-dmi-morph-dmi_dump_ids-into-dmi_format_ids-which-for.patch 0005-dump_stack-implement-arch-specific-hardware-descript.patch 0006-dump_stack-unify-debug-information-printed-by-show_r.patch 0007-arc-print-fatal-signals-reduce-duplicated-informatio.patch 0001-0002 update stack dumping functions in x86 and sparc32 in preparation. 0003 makes all arches except blackfin use generic dump_stack(). blackfin still uses the generic helper to print the same info. 0004-0005 properly abstract DMI identifier printing in WARN() and show_regs() so that all dumps print out the information. This enables show_regs() to use the same debug info message. 0006 updates show_regs() of all arches to use a common generic helper to print debug info. 0007 removes somem duplicate information from arc dumps. While this patchset changes how debug info is printed on some archs, the printed information is always superset of what used to be there. This patchset makes task dump debug messages consistent and enables adding more information. Workqueue is scheduled to add worker information including the workqueue in use and work item specific description. While this patch touches a lot of archs, it isn't too likely to cause non-trivial conflicts with arch-specfic changes and would probably be best to route together either through -mm. x86 is tested but other archs are either only compile tested or not tested at all. Changes to most archs are generally trivial. This patch: show_stack(current or NULL, NULL) is used to print the backtrace of the current task. As trace beyond the function itself isn't of much interest to anyone, don't show it by determining sp and bp in show_stack()'s frame and passing them to show_stack_log_lvl(). This brings show_stack(NULL, NULL)'s behavior in line with dump_stack(). Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-01 06:27:09 +08:00
x86/dumpstack: Remove raw stack dump For mostly historical reasons, the x86 oops dump shows the raw stack values: ... [registers] Stack: ffff880079af7350 ffff880079905400 0000000000000000 ffffc900008f3ae0 ffffffffa0196610 0000000000000001 00010000ffffffff 0000000087654321 0000000000000002 0000000000000000 0000000000000000 0000000000000000 Call Trace: ... This seems to be an artifact from long ago, and probably isn't needed anymore. It generally just adds noise to the dump, and it can be actively harmful because it leaks kernel addresses. Linus says: "The stack dump actually goes back to forever, and it used to be useful back in 1992 or so. But it used to be useful mainly because stacks were simpler and we didn't have very good call traces anyway. I definitely remember having used them - I just do not remember having used them in the last ten+ years. Of course, it's still true that if you can trigger an oops, you've likely already lost the security game, but since the stack dump is so useless, let's aim to just remove it and make games like the above harder." This also removes the related 'kstack=' cmdline option and the 'kstack_depth_to_print' sysctl. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/e83bd50df52d8fe88e94d2566426ae40d813bf8f.1477405374.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 22:51:13 +08:00
show_trace_log_lvl(task, NULL, sp, KERN_DEFAULT);
}
x86/dumpstack: Add show_stack_regs() and use it Add a helper to dump supplied pt_regs and use it in the MSR exception handling code to have precise stack traces pointing to the actual function causing the MSR access exception and not the stack frame of the exception handler itself. The new output looks like this: unchecked MSR access error: RDMSR from 0xdeadbeef at rIP: 0xffffffff8102ddb6 (early_init_intel+0x16/0x3a0) 00000000756e6547 ffffffff81c03f68 ffffffff81dd0940 ffffffff81c03f10 ffffffff81d42e65 0000000001000000 ffffffff81c03f58 ffffffff81d3e5a3 0000800000000000 ffffffff81800080 ffffffffffffffff 0000000000000000 Call Trace: [<ffffffff81d42e65>] early_cpu_init+0xe7/0x136 [<ffffffff81d3e5a3>] setup_arch+0xa5/0x9df [<ffffffff81d38bb9>] start_kernel+0x9f/0x43a [<ffffffff81d38294>] x86_64_start_reservations+0x2f/0x31 [<ffffffff81d383fe>] x86_64_start_kernel+0x168/0x176 Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1467671487-10344-4-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-05 06:31:27 +08:00
void show_stack_regs(struct pt_regs *regs)
{
x86/dumpstack: Remove raw stack dump For mostly historical reasons, the x86 oops dump shows the raw stack values: ... [registers] Stack: ffff880079af7350 ffff880079905400 0000000000000000 ffffc900008f3ae0 ffffffffa0196610 0000000000000001 00010000ffffffff 0000000087654321 0000000000000002 0000000000000000 0000000000000000 0000000000000000 Call Trace: ... This seems to be an artifact from long ago, and probably isn't needed anymore. It generally just adds noise to the dump, and it can be actively harmful because it leaks kernel addresses. Linus says: "The stack dump actually goes back to forever, and it used to be useful back in 1992 or so. But it used to be useful mainly because stacks were simpler and we didn't have very good call traces anyway. I definitely remember having used them - I just do not remember having used them in the last ten+ years. Of course, it's still true that if you can trigger an oops, you've likely already lost the security game, but since the stack dump is so useless, let's aim to just remove it and make games like the above harder." This also removes the related 'kstack=' cmdline option and the 'kstack_depth_to_print' sysctl. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/e83bd50df52d8fe88e94d2566426ae40d813bf8f.1477405374.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-25 22:51:13 +08:00
show_trace_log_lvl(current, regs, NULL, KERN_DEFAULT);
x86/dumpstack: Add show_stack_regs() and use it Add a helper to dump supplied pt_regs and use it in the MSR exception handling code to have precise stack traces pointing to the actual function causing the MSR access exception and not the stack frame of the exception handler itself. The new output looks like this: unchecked MSR access error: RDMSR from 0xdeadbeef at rIP: 0xffffffff8102ddb6 (early_init_intel+0x16/0x3a0) 00000000756e6547 ffffffff81c03f68 ffffffff81dd0940 ffffffff81c03f10 ffffffff81d42e65 0000000001000000 ffffffff81c03f58 ffffffff81d3e5a3 0000800000000000 ffffffff81800080 ffffffffffffffff 0000000000000000 Call Trace: [<ffffffff81d42e65>] early_cpu_init+0xe7/0x136 [<ffffffff81d3e5a3>] setup_arch+0xa5/0x9df [<ffffffff81d38bb9>] start_kernel+0x9f/0x43a [<ffffffff81d38294>] x86_64_start_reservations+0x2f/0x31 [<ffffffff81d383fe>] x86_64_start_kernel+0x168/0x176 Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1467671487-10344-4-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-07-05 06:31:27 +08:00
}
static arch_spinlock_t die_lock = __ARCH_SPIN_LOCK_UNLOCKED;
static int die_owner = -1;
static unsigned int die_nest_count;
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
unsigned long oops_begin(void)
{
int cpu;
unsigned long flags;
oops_enter();
/* racy, but better than risking deadlock. */
raw_local_irq_save(flags);
cpu = smp_processor_id();
if (!arch_spin_trylock(&die_lock)) {
if (cpu == die_owner)
/* nested oops. should stop eventually */;
else
arch_spin_lock(&die_lock);
}
die_nest_count++;
die_owner = cpu;
console_verbose();
bust_spinlocks(1);
return flags;
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
NOKPROBE_SYMBOL(oops_begin);
void __noreturn rewind_stack_and_make_dead(int signr);
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
void oops_end(unsigned long flags, struct pt_regs *regs, int signr)
{
if (regs && kexec_should_crash(current))
crash_kexec(regs);
bust_spinlocks(0);
die_owner = -1;
add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
die_nest_count--;
if (!die_nest_count)
/* Nest count reaches zero, release the lock. */
arch_spin_unlock(&die_lock);
raw_local_irq_restore(flags);
oops_exit();
/* Executive summary in case the oops scrolled away */
__show_regs(&exec_summary_regs, SHOW_REGS_ALL);
if (!signr)
return;
if (in_interrupt())
panic("Fatal exception in interrupt");
if (panic_on_oops)
panic("Fatal exception");
/*
* We're not going to return, but we might be on an IST stack or
* have very little stack space left. Rewind the stack and kill
* the task.
* Before we rewind the stack, we have to tell KASAN that we're going to
* reuse the task stack and that existing poisons are invalid.
*/
kasan_unpoison_task_stack(current);
rewind_stack_and_make_dead(signr);
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
NOKPROBE_SYMBOL(oops_end);
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
int __die(const char *str, struct pt_regs *regs, long err)
{
const char *pr = "";
/* Save the regs of the first oops for the executive summary later. */
if (!die_counter)
exec_summary_regs = *regs;
if (IS_ENABLED(CONFIG_PREEMPTION))
pr = IS_ENABLED(CONFIG_PREEMPT_RT) ? " PREEMPT_RT" : " PREEMPT";
bugs, x86: Fix printk levels for panic, softlockups and stack dumps rsyslog will display KERN_EMERG messages on a connected terminal. However, these messages are useless/undecipherable for a general user. For example, after a softlockup we get: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Stack: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Call Trace: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89 d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89 This happens because the printk levels for these messages are incorrect. Only an informational message should be displayed on a terminal. I modified the printk levels for various messages in the kernel and tested the output by using the drivers/misc/lkdtm.c kernel modules (ie, softlockups, panics, hard lockups, etc.) and confirmed that the console output was still the same and that the output to the terminals was correct. For example, in the case of a softlockup we now see the much more informative: Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ... BUG: soft lockup - CPU4 stuck for 60s! instead of the above confusing messages. AFAICT, the messages no longer have to be KERN_EMERG. In the most important case of a panic we set console_verbose(). As for the other less severe cases the correct data is output to the console and /var/log/messages. Successfully tested by me using the drivers/misc/lkdtm.c module. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: dzickus@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2012-01-26 21:55:34 +08:00
printk(KERN_DEFAULT
x86/dumpstack: Indicate in Oops whether PTI is configured and enabled CONFIG_PAGE_TABLE_ISOLATION is relatively new and intrusive feature that may still have some corner cases which could take some time to manifest and be fixed. It would be useful to have Oops messages indicate whether it was enabled for building the kernel, and whether it was disabled during boot. Example of fully enabled: Oops: 0001 [#1] SMP PTI Example of enabled during build, but disabled during boot: Oops: 0001 [#1] SMP NOPTI We can decide to remove this after the feature has been tested in the field long enough. [ tglx: Made it use boot_cpu_has() as requested by Borislav ] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eduardo Valentin <eduval@amazon.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: bpetkov@suse.de Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: jkosina@suse.cz Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-20 05:33:46 +08:00
"%s: %04lx [#%d]%s%s%s%s%s\n", str, err & 0xffff, ++die_counter,
pr,
IS_ENABLED(CONFIG_SMP) ? " SMP" : "",
debug_pagealloc_enabled() ? " DEBUG_PAGEALLOC" : "",
x86/dumpstack: Indicate in Oops whether PTI is configured and enabled CONFIG_PAGE_TABLE_ISOLATION is relatively new and intrusive feature that may still have some corner cases which could take some time to manifest and be fixed. It would be useful to have Oops messages indicate whether it was enabled for building the kernel, and whether it was disabled during boot. Example of fully enabled: Oops: 0001 [#1] SMP PTI Example of enabled during build, but disabled during boot: Oops: 0001 [#1] SMP NOPTI We can decide to remove this after the feature has been tested in the field long enough. [ tglx: Made it use boot_cpu_has() as requested by Borislav ] Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Eduardo Valentin <eduval@amazon.com> Acked-by: Dave Hansen <dave.hansen@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Laight <David.Laight@aculab.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Cc: aliguori@amazon.com Cc: bpetkov@suse.de Cc: daniel.gruss@iaik.tugraz.at Cc: hughd@google.com Cc: jkosina@suse.cz Cc: keescook@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-12-20 05:33:46 +08:00
IS_ENABLED(CONFIG_KASAN) ? " KASAN" : "",
IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION) ?
(boot_cpu_has(X86_FEATURE_PTI) ? " PTI" : " NOPTI") : "");
show_regs(regs);
print_modules();
if (notify_die(DIE_OOPS, str, regs, err,
current->thread.trap_nr, SIGSEGV) == NOTIFY_STOP)
return 1;
return 0;
}
kprobes, x86: Use NOKPROBE_SYMBOL() instead of __kprobes annotation Use NOKPROBE_SYMBOL macro for protecting functions from kprobes instead of __kprobes annotation under arch/x86. This applies nokprobe_inline annotation for some cases, because NOKPROBE_SYMBOL() will inhibit inlining by referring the symbol address. This just folds a bunch of previous NOKPROBE_SYMBOL() cleanup patches for x86 to one patch. Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Link: http://lkml.kernel.org/r/20140417081814.26341.51656.stgit@ltc230.yrl.intra.hitachi.co.jp Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fernando Luis Vázquez Cao <fernando_b1@lab.ntt.co.jp> Cc: Gleb Natapov <gleb@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Slaby <jslaby@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Lebon <jlebon@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matt Fleming <matt.fleming@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Seiji Aguchi <seiji.aguchi@hds.com> Cc: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-17 16:18:14 +08:00
NOKPROBE_SYMBOL(__die);
/*
* This is gone through when something in the kernel has done something bad
* and is about to be terminated:
*/
void die(const char *str, struct pt_regs *regs, long err)
{
unsigned long flags = oops_begin();
int sig = SIGSEGV;
if (__die(str, regs, err))
sig = 0;
oops_end(flags, regs, sig);
}
void show_regs(struct pt_regs *regs)
{
show_regs_print_info(KERN_DEFAULT);
__show_regs(regs, user_mode(regs) ? SHOW_REGS_USER : SHOW_REGS_ALL);
/*
* When in-kernel, we also print out the stack at the time of the fault..
*/
if (!user_mode(regs))
show_trace_log_lvl(current, regs, NULL, KERN_DEFAULT);
}