OpenCloudOS-Kernel/fs/proc/stat.c

236 lines
6.1 KiB
C
Raw Permalink Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 22:07:57 +08:00
// SPDX-License-Identifier: GPL-2.0
#include <linux/cpumask.h>
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/proc_fs.h>
#include <linux/sched.h>
#include <linux/sched/stat.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
#include <linux/time.h>
#include <linux/time_namespace.h>
#include <linux/irqnr.h>
#include <linux/sched/cputime.h>
#include <linux/tick.h>
#ifndef arch_irq_stat_cpu
#define arch_irq_stat_cpu(cpu) 0
#endif
#ifndef arch_irq_stat
#define arch_irq_stat() 0
#endif
#ifdef arch_idle_time
u64 get_idle_time(struct kernel_cpustat *kcs, int cpu)
{
u64 idle;
idle = kcs->cpustat[CPUTIME_IDLE];
if (cpu_online(cpu) && !nr_iowait_cpu(cpu))
idle += arch_idle_time(cpu);
return idle;
}
u64 get_iowait_time(struct kernel_cpustat *kcs, int cpu)
{
u64 iowait;
iowait = kcs->cpustat[CPUTIME_IOWAIT];
if (cpu_online(cpu) && nr_iowait_cpu(cpu))
iowait += arch_idle_time(cpu);
return iowait;
}
#else
u64 get_idle_time(struct kernel_cpustat *kcs, int cpu)
{
u64 idle, idle_usecs = -1ULL;
if (cpu_online(cpu))
idle_usecs = get_cpu_idle_time_us(cpu, NULL);
if (idle_usecs == -1ULL)
/* !NO_HZ or cpu offline so we can rely on cpustat.idle */
idle = kcs->cpustat[CPUTIME_IDLE];
else
idle = idle_usecs * NSEC_PER_USEC;
return idle;
}
u64 get_iowait_time(struct kernel_cpustat *kcs, int cpu)
{
u64 iowait, iowait_usecs = -1ULL;
if (cpu_online(cpu))
iowait_usecs = get_cpu_iowait_time_us(cpu, NULL);
if (iowait_usecs == -1ULL)
/* !NO_HZ or cpu offline so we can rely on cpustat.iowait */
iowait = kcs->cpustat[CPUTIME_IOWAIT];
else
iowait = iowait_usecs * NSEC_PER_USEC;
return iowait;
}
#endif
proc/stat: Make the interrupt statistics more efficient Waiman reported that on large systems with a large amount of interrupts the readout of /proc/stat takes a long time to sum up the interrupt statistics. In principle this is not a problem. but for unknown reasons some enterprise quality software reads /proc/stat with a high frequency. The reason for this is that interrupt statistics are accounted per cpu. So the /proc/stat logic has to sum up the interrupt stats for each interrupt. The interrupt core provides now a per interrupt summary counter which can be used to avoid the summation loops completely except for interrupts marked PER_CPU which are only a small fraction of the interrupt space if at all. Another simplification is to iterate only over the active interrupts and skip the potentially large gaps in the interrupt number space and just print zeros for the gaps without going into the interrupt core in the first place. Waiman provided test results from a 4-socket IvyBridge-EX system (60-core 120-thread, 3016 irqs) excuting a test program which reads /proc/stat 50,000 times: Before: 18.436s (sys 18.380s) After: 3.769s (sys 3.742s) Reported-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Waiman Long <longman@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: linux-fsdevel@vger.kernel.org Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/20190208135021.013828701@linutronix.de
2019-02-08 21:48:04 +08:00
static void show_irq_gap(struct seq_file *p, unsigned int gap)
{
static const char zeros[] = " 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0";
while (gap > 0) {
unsigned int inc;
inc = min_t(unsigned int, gap, ARRAY_SIZE(zeros) / 2);
seq_write(p, zeros, 2 * inc);
gap -= inc;
}
}
void show_all_irqs(struct seq_file *p)
proc/stat: Make the interrupt statistics more efficient Waiman reported that on large systems with a large amount of interrupts the readout of /proc/stat takes a long time to sum up the interrupt statistics. In principle this is not a problem. but for unknown reasons some enterprise quality software reads /proc/stat with a high frequency. The reason for this is that interrupt statistics are accounted per cpu. So the /proc/stat logic has to sum up the interrupt stats for each interrupt. The interrupt core provides now a per interrupt summary counter which can be used to avoid the summation loops completely except for interrupts marked PER_CPU which are only a small fraction of the interrupt space if at all. Another simplification is to iterate only over the active interrupts and skip the potentially large gaps in the interrupt number space and just print zeros for the gaps without going into the interrupt core in the first place. Waiman provided test results from a 4-socket IvyBridge-EX system (60-core 120-thread, 3016 irqs) excuting a test program which reads /proc/stat 50,000 times: Before: 18.436s (sys 18.380s) After: 3.769s (sys 3.742s) Reported-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Waiman Long <longman@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: linux-fsdevel@vger.kernel.org Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/20190208135021.013828701@linutronix.de
2019-02-08 21:48:04 +08:00
{
unsigned int i, next = 0;
for_each_active_irq(i) {
show_irq_gap(p, i - next);
seq_put_decimal_ull(p, " ", kstat_irqs_usr(i));
next = i + 1;
}
show_irq_gap(p, nr_irqs - next);
}
static int show_stat(struct seq_file *p, void *v)
{
int i, j;
u64 user, nice, system, idle, iowait, irq, softirq, steal;
u64 guest, guest_nice;
u64 sum = 0;
u64 sum_softirq = 0;
unsigned int per_softirq_sums[NR_SOFTIRQS] = {0};
struct timespec64 boottime;
user = nice = system = idle = iowait =
irq = softirq = steal = 0;
guest = guest_nice = 0;
getboottime64(&boottime);
/* shift boot timestamp according to the timens offset */
timens_sub_boottime(&boottime);
for_each_possible_cpu(i) {
struct kernel_cpustat *kcs = &kcpustat_cpu(i);
user += kcs->cpustat[CPUTIME_USER];
nice += kcs->cpustat[CPUTIME_NICE];
system += kcs->cpustat[CPUTIME_SYSTEM];
idle += get_idle_time(kcs, i);
iowait += get_iowait_time(kcs, i);
irq += kcs->cpustat[CPUTIME_IRQ];
softirq += kcs->cpustat[CPUTIME_SOFTIRQ];
steal += kcs->cpustat[CPUTIME_STEAL];
guest += kcs->cpustat[CPUTIME_GUEST];
guest_nice += kcs->cpustat[CPUTIME_GUEST_NICE];
sum += kstat_cpu_irqs_sum(i);
sum += arch_irq_stat_cpu(i);
for (j = 0; j < NR_SOFTIRQS; j++) {
unsigned int softirq_stat = kstat_softirqs_cpu(j, i);
per_softirq_sums[j] += softirq_stat;
sum_softirq += softirq_stat;
}
}
sum += arch_irq_stat();
seq_put_decimal_ull(p, "cpu ", nsec_to_clock_t(user));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(nice));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(system));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(idle));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(iowait));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(irq));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(softirq));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(steal));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(guest));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(guest_nice));
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
seq_putc(p, '\n');
for_each_online_cpu(i) {
struct kernel_cpustat *kcs = &kcpustat_cpu(i);
/* Copy values here to work around gcc-2.95.3, gcc-2.96 */
user = kcs->cpustat[CPUTIME_USER];
nice = kcs->cpustat[CPUTIME_NICE];
system = kcs->cpustat[CPUTIME_SYSTEM];
idle = get_idle_time(kcs, i);
iowait = get_iowait_time(kcs, i);
irq = kcs->cpustat[CPUTIME_IRQ];
softirq = kcs->cpustat[CPUTIME_SOFTIRQ];
steal = kcs->cpustat[CPUTIME_STEAL];
guest = kcs->cpustat[CPUTIME_GUEST];
guest_nice = kcs->cpustat[CPUTIME_GUEST_NICE];
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
seq_printf(p, "cpu%d", i);
seq_put_decimal_ull(p, " ", nsec_to_clock_t(user));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(nice));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(system));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(idle));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(iowait));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(irq));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(softirq));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(steal));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(guest));
seq_put_decimal_ull(p, " ", nsec_to_clock_t(guest_nice));
procfs: add num_to_str() to speed up /proc/stat == stat_check.py num = 0 with open("/proc/stat") as f: while num < 1000 : data = f.read() f.seek(0, 0) num = num + 1 == perf shows 20.39% stat_check.py [kernel.kallsyms] [k] format_decode 13.41% stat_check.py [kernel.kallsyms] [k] number 12.61% stat_check.py [kernel.kallsyms] [k] vsnprintf 10.85% stat_check.py [kernel.kallsyms] [k] memcpy 4.85% stat_check.py [kernel.kallsyms] [k] radix_tree_lookup 4.43% stat_check.py [kernel.kallsyms] [k] seq_printf This patch removes most of calls to vsnprintf() by adding num_to_str() and seq_print_decimal_ull(), which prints decimal numbers without rich functions provided by printf(). On my 8cpu box. == Before patch == [root@bluextal test]# time ./stat_check.py real 0m0.150s user 0m0.026s sys 0m0.121s == After patch == [root@bluextal test]# time ./stat_check.py real 0m0.055s user 0m0.022s sys 0m0.030s [akpm@linux-foundation.org: remove incorrect comment, use less statck in num_to_str(), move comment from .h to .c, simplify seq_put_decimal_ull()] [andrea@betterlinux.com: avoid breaking the ABI in /proc/stat] Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrea Righi <andrea@betterlinux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Glauber Costa <glommer@parallels.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Turner <pjt@google.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-24 06:02:54 +08:00
seq_putc(p, '\n');
}
seq_put_decimal_ull(p, "intr ", (unsigned long long)sum);
proc/stat: Make the interrupt statistics more efficient Waiman reported that on large systems with a large amount of interrupts the readout of /proc/stat takes a long time to sum up the interrupt statistics. In principle this is not a problem. but for unknown reasons some enterprise quality software reads /proc/stat with a high frequency. The reason for this is that interrupt statistics are accounted per cpu. So the /proc/stat logic has to sum up the interrupt stats for each interrupt. The interrupt core provides now a per interrupt summary counter which can be used to avoid the summation loops completely except for interrupts marked PER_CPU which are only a small fraction of the interrupt space if at all. Another simplification is to iterate only over the active interrupts and skip the potentially large gaps in the interrupt number space and just print zeros for the gaps without going into the interrupt core in the first place. Waiman provided test results from a 4-socket IvyBridge-EX system (60-core 120-thread, 3016 irqs) excuting a test program which reads /proc/stat 50,000 times: Before: 18.436s (sys 18.380s) After: 3.769s (sys 3.742s) Reported-by: Waiman Long <longman@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Waiman Long <longman@redhat.com> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Reviewed-by: Davidlohr Bueso <dbueso@suse.de> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Kees Cook <keescook@chromium.org> Cc: linux-fsdevel@vger.kernel.org Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Daniel Colascione <dancol@google.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Randy Dunlap <rdunlap@infradead.org> Link: https://lkml.kernel.org/r/20190208135021.013828701@linutronix.de
2019-02-08 21:48:04 +08:00
show_all_irqs(p);
seq_printf(p,
"\nctxt %llu\n"
"btime %llu\n"
"processes %lu\n"
"procs_running %lu\n"
"procs_blocked %lu\n",
nr_context_switches(),
(unsigned long long)boottime.tv_sec,
nr_forks(),
nr_running(),
nr_iowait());
seq_put_decimal_ull(p, "softirq ", (unsigned long long)sum_softirq);
for (i = 0; i < NR_SOFTIRQS; i++)
seq_put_decimal_ull(p, " ", per_softirq_sums[i]);
seq_putc(p, '\n');
return 0;
}
static int stat_open(struct inode *inode, struct file *file)
{
unsigned int size = 1024 + 128 * num_online_cpus();
/* minimum size to display an interrupt count : 2 bytes */
size += 2 * nr_irqs;
return single_open_size(file, show_stat, NULL, size);
}
static const struct file_operations proc_stat_operations = {
.open = stat_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static int __init proc_stat_init(void)
{
proc_create("stat", 0, NULL, &proc_stat_operations);
return 0;
}
fs_initcall(proc_stat_init);