2019-05-27 14:55:06 +08:00
|
|
|
// SPDX-License-Identifier: GPL-2.0-or-later
|
2010-10-08 06:48:09 +08:00
|
|
|
/*
|
2014-08-29 22:26:00 +08:00
|
|
|
* A iio driver for the light sensor ISL 29018/29023/29035.
|
2010-10-08 06:48:09 +08:00
|
|
|
*
|
|
|
|
* IIO driver for monitoring ambient light intensity in luxi, proximity
|
|
|
|
* sensing and infrared sensing.
|
|
|
|
*
|
|
|
|
* Copyright (c) 2010, NVIDIA Corporation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/i2c.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/mutex.h>
|
|
|
|
#include <linux/delay.h>
|
2012-04-20 15:27:38 +08:00
|
|
|
#include <linux/regmap.h>
|
2019-01-08 17:09:39 +08:00
|
|
|
#include <linux/regulator/consumer.h>
|
2010-10-08 06:48:09 +08:00
|
|
|
#include <linux/slab.h>
|
2012-04-25 22:54:58 +08:00
|
|
|
#include <linux/iio/iio.h>
|
|
|
|
#include <linux/iio/sysfs.h>
|
2014-01-09 18:20:00 +08:00
|
|
|
#include <linux/acpi.h>
|
2012-04-20 15:27:38 +08:00
|
|
|
|
2016-07-05 19:55:36 +08:00
|
|
|
#define ISL29018_CONV_TIME_MS 100
|
2010-10-08 06:48:09 +08:00
|
|
|
|
|
|
|
#define ISL29018_REG_ADD_COMMAND1 0x00
|
2016-07-05 19:55:36 +08:00
|
|
|
#define ISL29018_CMD1_OPMODE_SHIFT 5
|
|
|
|
#define ISL29018_CMD1_OPMODE_MASK (7 << ISL29018_CMD1_OPMODE_SHIFT)
|
|
|
|
#define ISL29018_CMD1_OPMODE_POWER_DOWN 0
|
|
|
|
#define ISL29018_CMD1_OPMODE_ALS_ONCE 1
|
|
|
|
#define ISL29018_CMD1_OPMODE_IR_ONCE 2
|
|
|
|
#define ISL29018_CMD1_OPMODE_PROX_ONCE 3
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2016-07-05 19:55:36 +08:00
|
|
|
#define ISL29018_REG_ADD_COMMAND2 0x01
|
|
|
|
#define ISL29018_CMD2_RESOLUTION_SHIFT 2
|
|
|
|
#define ISL29018_CMD2_RESOLUTION_MASK (0x3 << ISL29018_CMD2_RESOLUTION_SHIFT)
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2016-07-05 19:55:36 +08:00
|
|
|
#define ISL29018_CMD2_RANGE_SHIFT 0
|
|
|
|
#define ISL29018_CMD2_RANGE_MASK (0x3 << ISL29018_CMD2_RANGE_SHIFT)
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2016-07-05 19:55:36 +08:00
|
|
|
#define ISL29018_CMD2_SCHEME_SHIFT 7
|
|
|
|
#define ISL29018_CMD2_SCHEME_MASK (0x1 << ISL29018_CMD2_SCHEME_SHIFT)
|
2010-10-08 06:48:09 +08:00
|
|
|
|
|
|
|
#define ISL29018_REG_ADD_DATA_LSB 0x02
|
|
|
|
#define ISL29018_REG_ADD_DATA_MSB 0x03
|
|
|
|
|
2011-08-10 06:18:14 +08:00
|
|
|
#define ISL29018_REG_TEST 0x08
|
|
|
|
#define ISL29018_TEST_SHIFT 0
|
|
|
|
#define ISL29018_TEST_MASK (0xFF << ISL29018_TEST_SHIFT)
|
|
|
|
|
2014-08-29 22:26:00 +08:00
|
|
|
#define ISL29035_REG_DEVICE_ID 0x0F
|
|
|
|
#define ISL29035_DEVICE_ID_SHIFT 0x03
|
|
|
|
#define ISL29035_DEVICE_ID_MASK (0x7 << ISL29035_DEVICE_ID_SHIFT)
|
|
|
|
#define ISL29035_DEVICE_ID 0x5
|
|
|
|
#define ISL29035_BOUT_SHIFT 0x07
|
|
|
|
#define ISL29035_BOUT_MASK (0x01 << ISL29035_BOUT_SHIFT)
|
|
|
|
|
2015-04-17 03:20:59 +08:00
|
|
|
enum isl29018_int_time {
|
|
|
|
ISL29018_INT_TIME_16,
|
|
|
|
ISL29018_INT_TIME_12,
|
|
|
|
ISL29018_INT_TIME_8,
|
|
|
|
ISL29018_INT_TIME_4,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const unsigned int isl29018_int_utimes[3][4] = {
|
|
|
|
{90000, 5630, 351, 21},
|
|
|
|
{90000, 5600, 352, 22},
|
|
|
|
{105000, 6500, 410, 25},
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct isl29018_scale {
|
|
|
|
unsigned int scale;
|
|
|
|
unsigned int uscale;
|
|
|
|
} isl29018_scales[4][4] = {
|
|
|
|
{ {0, 15258}, {0, 61035}, {0, 244140}, {0, 976562} },
|
|
|
|
{ {0, 244140}, {0, 976562}, {3, 906250}, {15, 625000} },
|
|
|
|
{ {3, 906250}, {15, 625000}, {62, 500000}, {250, 0} },
|
|
|
|
{ {62, 500000}, {250, 0}, {1000, 0}, {4000, 0} }
|
|
|
|
};
|
|
|
|
|
2010-10-08 06:48:09 +08:00
|
|
|
struct isl29018_chip {
|
2012-04-20 15:27:38 +08:00
|
|
|
struct regmap *regmap;
|
2010-10-08 06:48:09 +08:00
|
|
|
struct mutex lock;
|
2014-08-29 22:26:00 +08:00
|
|
|
int type;
|
2015-04-17 03:20:58 +08:00
|
|
|
unsigned int calibscale;
|
|
|
|
unsigned int ucalibscale;
|
2015-04-17 03:20:59 +08:00
|
|
|
unsigned int int_time;
|
|
|
|
struct isl29018_scale scale;
|
2010-10-08 06:48:09 +08:00
|
|
|
int prox_scheme;
|
2012-10-25 07:39:00 +08:00
|
|
|
bool suspended;
|
2019-01-08 17:09:39 +08:00
|
|
|
struct regulator *vcc_reg;
|
2010-10-08 06:48:09 +08:00
|
|
|
};
|
|
|
|
|
2015-04-17 03:20:59 +08:00
|
|
|
static int isl29018_set_integration_time(struct isl29018_chip *chip,
|
|
|
|
unsigned int utime)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
2016-09-25 19:41:07 +08:00
|
|
|
unsigned int i;
|
|
|
|
int ret;
|
2015-04-17 03:20:59 +08:00
|
|
|
unsigned int int_time, new_int_time;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(isl29018_int_utimes[chip->type]); ++i) {
|
|
|
|
if (utime == isl29018_int_utimes[chip->type][i]) {
|
|
|
|
new_int_time = i;
|
2010-10-08 06:48:09 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-04-17 03:20:59 +08:00
|
|
|
if (i >= ARRAY_SIZE(isl29018_int_utimes[chip->type]))
|
2010-10-08 06:48:09 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2016-07-05 19:55:36 +08:00
|
|
|
ret = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMAND2,
|
|
|
|
ISL29018_CMD2_RESOLUTION_MASK,
|
|
|
|
i << ISL29018_CMD2_RESOLUTION_SHIFT);
|
2015-04-17 03:20:59 +08:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
2016-07-05 19:55:39 +08:00
|
|
|
/* Keep the same range when integration time changes */
|
2015-04-17 03:20:59 +08:00
|
|
|
int_time = chip->int_time;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(isl29018_scales[int_time]); ++i) {
|
|
|
|
if (chip->scale.scale == isl29018_scales[int_time][i].scale &&
|
|
|
|
chip->scale.uscale == isl29018_scales[int_time][i].uscale) {
|
|
|
|
chip->scale = isl29018_scales[new_int_time][i];
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
chip->int_time = new_int_time;
|
|
|
|
|
|
|
|
return 0;
|
2010-10-08 06:48:09 +08:00
|
|
|
}
|
|
|
|
|
2015-04-17 03:20:59 +08:00
|
|
|
static int isl29018_set_scale(struct isl29018_chip *chip, int scale, int uscale)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
2016-09-25 19:41:07 +08:00
|
|
|
unsigned int i;
|
|
|
|
int ret;
|
2015-04-17 03:20:59 +08:00
|
|
|
struct isl29018_scale new_scale;
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2015-04-17 03:20:59 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(isl29018_scales[chip->int_time]); ++i) {
|
|
|
|
if (scale == isl29018_scales[chip->int_time][i].scale &&
|
|
|
|
uscale == isl29018_scales[chip->int_time][i].uscale) {
|
|
|
|
new_scale = isl29018_scales[chip->int_time][i];
|
2010-10-08 06:48:09 +08:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2015-04-17 03:20:59 +08:00
|
|
|
if (i >= ARRAY_SIZE(isl29018_scales[chip->int_time]))
|
2010-10-08 06:48:09 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2016-07-05 19:55:36 +08:00
|
|
|
ret = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMAND2,
|
|
|
|
ISL29018_CMD2_RANGE_MASK,
|
|
|
|
i << ISL29018_CMD2_RANGE_SHIFT);
|
2015-04-17 03:20:59 +08:00
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
chip->scale = new_scale;
|
|
|
|
|
|
|
|
return 0;
|
2010-10-08 06:48:09 +08:00
|
|
|
}
|
|
|
|
|
2012-04-20 15:27:38 +08:00
|
|
|
static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
|
|
|
int status;
|
2012-04-20 15:27:38 +08:00
|
|
|
unsigned int lsb;
|
|
|
|
unsigned int msb;
|
2016-02-23 04:34:32 +08:00
|
|
|
struct device *dev = regmap_get_device(chip->regmap);
|
2010-10-08 06:48:09 +08:00
|
|
|
|
|
|
|
/* Set mode */
|
2012-04-20 15:27:38 +08:00
|
|
|
status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1,
|
2016-07-05 19:55:36 +08:00
|
|
|
mode << ISL29018_CMD1_OPMODE_SHIFT);
|
2010-10-08 06:48:09 +08:00
|
|
|
if (status) {
|
2016-02-23 04:34:32 +08:00
|
|
|
dev_err(dev,
|
2012-04-20 15:27:38 +08:00
|
|
|
"Error in setting operating mode err %d\n", status);
|
2010-10-08 06:48:09 +08:00
|
|
|
return status;
|
|
|
|
}
|
2016-07-05 19:55:36 +08:00
|
|
|
msleep(ISL29018_CONV_TIME_MS);
|
2012-04-20 15:27:38 +08:00
|
|
|
status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_LSB, &lsb);
|
|
|
|
if (status < 0) {
|
2016-02-23 04:34:32 +08:00
|
|
|
dev_err(dev,
|
2012-04-20 15:27:38 +08:00
|
|
|
"Error in reading LSB DATA with err %d\n", status);
|
|
|
|
return status;
|
2010-10-08 06:48:09 +08:00
|
|
|
}
|
|
|
|
|
2012-04-20 15:27:38 +08:00
|
|
|
status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_MSB, &msb);
|
|
|
|
if (status < 0) {
|
2016-02-23 04:34:32 +08:00
|
|
|
dev_err(dev,
|
2012-04-20 15:27:38 +08:00
|
|
|
"Error in reading MSB DATA with error %d\n", status);
|
|
|
|
return status;
|
2010-10-08 06:48:09 +08:00
|
|
|
}
|
2016-02-23 04:34:32 +08:00
|
|
|
dev_vdbg(dev, "MSB 0x%x and LSB 0x%x\n", msb, lsb);
|
2010-10-08 06:48:09 +08:00
|
|
|
|
|
|
|
return (msb << 8) | lsb;
|
|
|
|
}
|
|
|
|
|
2012-04-20 15:27:38 +08:00
|
|
|
static int isl29018_read_lux(struct isl29018_chip *chip, int *lux)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
|
|
|
int lux_data;
|
2015-04-17 03:20:59 +08:00
|
|
|
unsigned int data_x_range;
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2016-07-05 19:55:36 +08:00
|
|
|
lux_data = isl29018_read_sensor_input(chip,
|
|
|
|
ISL29018_CMD1_OPMODE_ALS_ONCE);
|
2010-10-08 06:48:09 +08:00
|
|
|
if (lux_data < 0)
|
|
|
|
return lux_data;
|
|
|
|
|
2015-04-17 03:20:59 +08:00
|
|
|
data_x_range = lux_data * chip->scale.scale +
|
|
|
|
lux_data * chip->scale.uscale / 1000000;
|
|
|
|
*lux = data_x_range * chip->calibscale +
|
|
|
|
data_x_range * chip->ucalibscale / 1000000;
|
2010-10-08 06:48:09 +08:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-04-20 15:27:38 +08:00
|
|
|
static int isl29018_read_ir(struct isl29018_chip *chip, int *ir)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
|
|
|
int ir_data;
|
|
|
|
|
2016-07-05 19:55:36 +08:00
|
|
|
ir_data = isl29018_read_sensor_input(chip,
|
|
|
|
ISL29018_CMD1_OPMODE_IR_ONCE);
|
2010-10-08 06:48:09 +08:00
|
|
|
if (ir_data < 0)
|
|
|
|
return ir_data;
|
|
|
|
|
|
|
|
*ir = ir_data;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2012-04-20 15:27:38 +08:00
|
|
|
static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme,
|
2016-02-18 15:35:36 +08:00
|
|
|
int *near_ir)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
|
|
|
int status;
|
|
|
|
int prox_data = -1;
|
|
|
|
int ir_data = -1;
|
2016-02-23 04:34:32 +08:00
|
|
|
struct device *dev = regmap_get_device(chip->regmap);
|
2010-10-08 06:48:09 +08:00
|
|
|
|
|
|
|
/* Do proximity sensing with required scheme */
|
2016-07-05 19:55:36 +08:00
|
|
|
status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMAND2,
|
|
|
|
ISL29018_CMD2_SCHEME_MASK,
|
|
|
|
scheme << ISL29018_CMD2_SCHEME_SHIFT);
|
2010-10-08 06:48:09 +08:00
|
|
|
if (status) {
|
2016-02-23 04:34:32 +08:00
|
|
|
dev_err(dev, "Error in setting operating mode\n");
|
2010-10-08 06:48:09 +08:00
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
2012-04-20 15:27:38 +08:00
|
|
|
prox_data = isl29018_read_sensor_input(chip,
|
2016-07-05 19:55:36 +08:00
|
|
|
ISL29018_CMD1_OPMODE_PROX_ONCE);
|
2010-10-08 06:48:09 +08:00
|
|
|
if (prox_data < 0)
|
|
|
|
return prox_data;
|
|
|
|
|
|
|
|
if (scheme == 1) {
|
|
|
|
*near_ir = prox_data;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-07-05 19:55:36 +08:00
|
|
|
ir_data = isl29018_read_sensor_input(chip,
|
|
|
|
ISL29018_CMD1_OPMODE_IR_ONCE);
|
2010-10-08 06:48:09 +08:00
|
|
|
if (ir_data < 0)
|
|
|
|
return ir_data;
|
|
|
|
|
|
|
|
if (prox_data >= ir_data)
|
|
|
|
*near_ir = prox_data - ir_data;
|
|
|
|
else
|
|
|
|
*near_ir = 0;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-09-27 08:20:17 +08:00
|
|
|
static ssize_t in_illuminance_scale_available_show
|
|
|
|
(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
2015-04-17 03:20:59 +08:00
|
|
|
{
|
|
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
|
|
struct isl29018_chip *chip = iio_priv(indio_dev);
|
2016-09-25 19:41:07 +08:00
|
|
|
unsigned int i;
|
|
|
|
int len = 0;
|
2015-04-17 03:20:59 +08:00
|
|
|
|
2016-09-27 08:20:18 +08:00
|
|
|
mutex_lock(&chip->lock);
|
2015-04-17 03:20:59 +08:00
|
|
|
for (i = 0; i < ARRAY_SIZE(isl29018_scales[chip->int_time]); ++i)
|
|
|
|
len += sprintf(buf + len, "%d.%06d ",
|
|
|
|
isl29018_scales[chip->int_time][i].scale,
|
|
|
|
isl29018_scales[chip->int_time][i].uscale);
|
2016-09-27 08:20:18 +08:00
|
|
|
mutex_unlock(&chip->lock);
|
2015-04-17 03:20:59 +08:00
|
|
|
|
|
|
|
buf[len - 1] = '\n';
|
|
|
|
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
2016-09-27 08:20:17 +08:00
|
|
|
static ssize_t in_illuminance_integration_time_available_show
|
|
|
|
(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
2015-04-17 03:20:59 +08:00
|
|
|
{
|
|
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
|
|
|
struct isl29018_chip *chip = iio_priv(indio_dev);
|
2016-09-25 19:41:07 +08:00
|
|
|
unsigned int i;
|
|
|
|
int len = 0;
|
2015-04-17 03:20:59 +08:00
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(isl29018_int_utimes[chip->type]); ++i)
|
|
|
|
len += sprintf(buf + len, "0.%06d ",
|
|
|
|
isl29018_int_utimes[chip->type][i]);
|
|
|
|
|
|
|
|
buf[len - 1] = '\n';
|
|
|
|
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
2016-10-07 08:48:34 +08:00
|
|
|
/*
|
|
|
|
* From ISL29018 Data Sheet (FN6619.4, Oct 8, 2012) regarding the
|
|
|
|
* infrared suppression:
|
|
|
|
*
|
|
|
|
* Proximity Sensing Scheme: Bit 7. This bit programs the function
|
|
|
|
* of the proximity detection. Logic 0 of this bit, Scheme 0, makes
|
|
|
|
* full n (4, 8, 12, 16) bits (unsigned) proximity detection. The range
|
|
|
|
* of Scheme 0 proximity count is from 0 to 2^n. Logic 1 of this bit,
|
|
|
|
* Scheme 1, makes n-1 (3, 7, 11, 15) bits (2's complementary)
|
|
|
|
* proximity_less_ambient detection. The range of Scheme 1
|
|
|
|
* proximity count is from -2^(n-1) to 2^(n-1) . The sign bit is extended
|
|
|
|
* for resolutions less than 16. While Scheme 0 has wider dynamic
|
|
|
|
* range, Scheme 1 proximity detection is less affected by the
|
|
|
|
* ambient IR noise variation.
|
|
|
|
*
|
|
|
|
* 0 Sensing IR from LED and ambient
|
|
|
|
* 1 Sensing IR from LED with ambient IR rejection
|
|
|
|
*/
|
2016-09-27 08:20:17 +08:00
|
|
|
static ssize_t proximity_on_chip_ambient_infrared_suppression_show
|
|
|
|
(struct device *dev, struct device_attribute *attr,
|
|
|
|
char *buf)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
2012-05-12 21:39:51 +08:00
|
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
2011-06-27 20:07:57 +08:00
|
|
|
struct isl29018_chip *chip = iio_priv(indio_dev);
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2016-02-18 15:35:38 +08:00
|
|
|
/*
|
2016-07-05 19:55:39 +08:00
|
|
|
* Return the "proximity scheme" i.e. if the chip does on chip
|
2016-02-18 15:35:38 +08:00
|
|
|
* infrared suppression (1 means perform on chip suppression)
|
|
|
|
*/
|
2010-10-08 06:48:09 +08:00
|
|
|
return sprintf(buf, "%d\n", chip->prox_scheme);
|
|
|
|
}
|
|
|
|
|
2016-09-27 08:20:17 +08:00
|
|
|
static ssize_t proximity_on_chip_ambient_infrared_suppression_store
|
|
|
|
(struct device *dev, struct device_attribute *attr,
|
|
|
|
const char *buf, size_t count)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
2012-05-12 21:39:51 +08:00
|
|
|
struct iio_dev *indio_dev = dev_to_iio_dev(dev);
|
2011-06-27 20:07:57 +08:00
|
|
|
struct isl29018_chip *chip = iio_priv(indio_dev);
|
staging: iio: replace strict_strto*() with kstrto*()
The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.
Previously, there were only strict_strtol(), strict_strtoul(),
strict_strtoull(), and strict_strtoll(). Thus, when converting
to the variables, only long, unsigned long, unsigned long long,
and long long can be used.
However, kstrto*() provides various functions handling all types
of variables. Therefore, the types of variables can be changed
properly.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-20 10:31:00 +08:00
|
|
|
int val;
|
2010-10-08 06:48:09 +08:00
|
|
|
|
staging: iio: replace strict_strto*() with kstrto*()
The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.
Previously, there were only strict_strtol(), strict_strtoul(),
strict_strtoull(), and strict_strtoll(). Thus, when converting
to the variables, only long, unsigned long, unsigned long long,
and long long can be used.
However, kstrto*() provides various functions handling all types
of variables. Therefore, the types of variables can be changed
properly.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-20 10:31:00 +08:00
|
|
|
if (kstrtoint(buf, 10, &val))
|
2010-10-08 06:48:09 +08:00
|
|
|
return -EINVAL;
|
2016-07-05 19:55:37 +08:00
|
|
|
if (!(val == 0 || val == 1))
|
2010-10-08 06:48:09 +08:00
|
|
|
return -EINVAL;
|
|
|
|
|
2016-02-18 15:35:38 +08:00
|
|
|
/*
|
2016-07-05 19:55:39 +08:00
|
|
|
* Get the "proximity scheme" i.e. if the chip does on chip
|
2016-02-18 15:35:38 +08:00
|
|
|
* infrared suppression (1 means perform on chip suppression)
|
|
|
|
*/
|
2010-10-08 06:48:09 +08:00
|
|
|
mutex_lock(&chip->lock);
|
staging: iio: replace strict_strto*() with kstrto*()
The usage of strict_strto*() is not preferred, because
strict_strto*() is obsolete. Thus, kstrto*() should be
used.
Previously, there were only strict_strtol(), strict_strtoul(),
strict_strtoull(), and strict_strtoll(). Thus, when converting
to the variables, only long, unsigned long, unsigned long long,
and long long can be used.
However, kstrto*() provides various functions handling all types
of variables. Therefore, the types of variables can be changed
properly.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-08-20 10:31:00 +08:00
|
|
|
chip->prox_scheme = val;
|
2010-10-08 06:48:09 +08:00
|
|
|
mutex_unlock(&chip->lock);
|
|
|
|
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
|
2011-07-08 03:01:56 +08:00
|
|
|
static int isl29018_write_raw(struct iio_dev *indio_dev,
|
|
|
|
struct iio_chan_spec const *chan,
|
|
|
|
int val,
|
|
|
|
int val2,
|
|
|
|
long mask)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
2011-07-08 03:01:56 +08:00
|
|
|
struct isl29018_chip *chip = iio_priv(indio_dev);
|
|
|
|
int ret = -EINVAL;
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2011-07-08 03:01:56 +08:00
|
|
|
mutex_lock(&chip->lock);
|
2016-09-27 08:20:20 +08:00
|
|
|
if (chip->suspended) {
|
|
|
|
ret = -EBUSY;
|
|
|
|
goto write_done;
|
|
|
|
}
|
2015-04-17 03:20:59 +08:00
|
|
|
switch (mask) {
|
|
|
|
case IIO_CHAN_INFO_CALIBSCALE:
|
|
|
|
if (chan->type == IIO_LIGHT) {
|
|
|
|
chip->calibscale = val;
|
|
|
|
chip->ucalibscale = val2;
|
|
|
|
ret = 0;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case IIO_CHAN_INFO_INT_TIME:
|
2016-09-25 19:41:06 +08:00
|
|
|
if (chan->type == IIO_LIGHT && !val)
|
2015-04-17 03:20:59 +08:00
|
|
|
ret = isl29018_set_integration_time(chip, val2);
|
|
|
|
break;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
|
|
if (chan->type == IIO_LIGHT)
|
|
|
|
ret = isl29018_set_scale(chip, val, val2);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
2011-07-08 03:01:56 +08:00
|
|
|
}
|
|
|
|
|
2016-09-27 08:20:20 +08:00
|
|
|
write_done:
|
|
|
|
mutex_unlock(&chip->lock);
|
2016-10-10 15:19:55 +08:00
|
|
|
|
2012-11-08 17:05:00 +08:00
|
|
|
return ret;
|
2010-10-08 06:48:09 +08:00
|
|
|
}
|
|
|
|
|
2011-07-08 03:01:56 +08:00
|
|
|
static int isl29018_read_raw(struct iio_dev *indio_dev,
|
|
|
|
struct iio_chan_spec const *chan,
|
|
|
|
int *val,
|
|
|
|
int *val2,
|
|
|
|
long mask)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
2011-07-08 03:01:56 +08:00
|
|
|
int ret = -EINVAL;
|
|
|
|
struct isl29018_chip *chip = iio_priv(indio_dev);
|
|
|
|
|
|
|
|
mutex_lock(&chip->lock);
|
2012-10-25 07:39:00 +08:00
|
|
|
if (chip->suspended) {
|
2016-09-27 08:20:19 +08:00
|
|
|
ret = -EBUSY;
|
|
|
|
goto read_done;
|
2012-10-25 07:39:00 +08:00
|
|
|
}
|
2011-07-08 03:01:56 +08:00
|
|
|
switch (mask) {
|
2012-04-16 00:41:22 +08:00
|
|
|
case IIO_CHAN_INFO_RAW:
|
|
|
|
case IIO_CHAN_INFO_PROCESSED:
|
2011-07-08 03:01:56 +08:00
|
|
|
switch (chan->type) {
|
|
|
|
case IIO_LIGHT:
|
2012-04-20 15:27:38 +08:00
|
|
|
ret = isl29018_read_lux(chip, val);
|
2011-07-08 03:01:56 +08:00
|
|
|
break;
|
|
|
|
case IIO_INTENSITY:
|
2012-04-20 15:27:38 +08:00
|
|
|
ret = isl29018_read_ir(chip, val);
|
2011-07-08 03:01:56 +08:00
|
|
|
break;
|
|
|
|
case IIO_PROXIMITY:
|
2012-04-20 15:27:38 +08:00
|
|
|
ret = isl29018_read_proximity_ir(chip,
|
2016-02-18 15:35:36 +08:00
|
|
|
chip->prox_scheme,
|
|
|
|
val);
|
2011-07-08 03:01:56 +08:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
if (!ret)
|
|
|
|
ret = IIO_VAL_INT;
|
|
|
|
break;
|
2015-04-17 03:20:59 +08:00
|
|
|
case IIO_CHAN_INFO_INT_TIME:
|
|
|
|
if (chan->type == IIO_LIGHT) {
|
|
|
|
*val = 0;
|
|
|
|
*val2 = isl29018_int_utimes[chip->type][chip->int_time];
|
|
|
|
ret = IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
|
|
if (chan->type == IIO_LIGHT) {
|
|
|
|
*val = chip->scale.scale;
|
|
|
|
*val2 = chip->scale.uscale;
|
|
|
|
ret = IIO_VAL_INT_PLUS_MICRO;
|
|
|
|
}
|
|
|
|
break;
|
2011-10-27 00:41:36 +08:00
|
|
|
case IIO_CHAN_INFO_CALIBSCALE:
|
2011-07-08 03:01:56 +08:00
|
|
|
if (chan->type == IIO_LIGHT) {
|
2015-04-17 03:20:58 +08:00
|
|
|
*val = chip->calibscale;
|
|
|
|
*val2 = chip->ucalibscale;
|
2012-09-06 03:55:00 +08:00
|
|
|
ret = IIO_VAL_INT_PLUS_MICRO;
|
2011-07-08 03:01:56 +08:00
|
|
|
}
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
2016-09-27 08:20:19 +08:00
|
|
|
|
|
|
|
read_done:
|
2011-07-08 03:01:56 +08:00
|
|
|
mutex_unlock(&chip->lock);
|
2016-10-10 15:19:55 +08:00
|
|
|
|
2011-07-08 03:01:56 +08:00
|
|
|
return ret;
|
2010-10-08 06:48:09 +08:00
|
|
|
}
|
|
|
|
|
2014-08-29 22:26:00 +08:00
|
|
|
#define ISL29018_LIGHT_CHANNEL { \
|
|
|
|
.type = IIO_LIGHT, \
|
|
|
|
.indexed = 1, \
|
|
|
|
.channel = 0, \
|
|
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) | \
|
2015-04-17 03:20:59 +08:00
|
|
|
BIT(IIO_CHAN_INFO_CALIBSCALE) | \
|
|
|
|
BIT(IIO_CHAN_INFO_SCALE) | \
|
|
|
|
BIT(IIO_CHAN_INFO_INT_TIME), \
|
2014-08-29 22:26:00 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
#define ISL29018_IR_CHANNEL { \
|
|
|
|
.type = IIO_INTENSITY, \
|
|
|
|
.modified = 1, \
|
|
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
|
|
.channel2 = IIO_MOD_LIGHT_IR, \
|
|
|
|
}
|
|
|
|
|
|
|
|
#define ISL29018_PROXIMITY_CHANNEL { \
|
|
|
|
.type = IIO_PROXIMITY, \
|
|
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
|
|
}
|
|
|
|
|
2011-07-08 03:01:56 +08:00
|
|
|
static const struct iio_chan_spec isl29018_channels[] = {
|
2014-08-29 22:26:00 +08:00
|
|
|
ISL29018_LIGHT_CHANNEL,
|
|
|
|
ISL29018_IR_CHANNEL,
|
|
|
|
ISL29018_PROXIMITY_CHANNEL,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct iio_chan_spec isl29023_channels[] = {
|
|
|
|
ISL29018_LIGHT_CHANNEL,
|
|
|
|
ISL29018_IR_CHANNEL,
|
2011-07-08 03:01:56 +08:00
|
|
|
};
|
|
|
|
|
2016-09-27 08:20:17 +08:00
|
|
|
static IIO_DEVICE_ATTR_RO(in_illuminance_integration_time_available, 0);
|
|
|
|
static IIO_DEVICE_ATTR_RO(in_illuminance_scale_available, 0);
|
|
|
|
static IIO_DEVICE_ATTR_RW(proximity_on_chip_ambient_infrared_suppression, 0);
|
2010-10-08 06:48:09 +08:00
|
|
|
|
|
|
|
#define ISL29018_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
|
2015-04-17 03:20:59 +08:00
|
|
|
|
2010-10-08 06:48:09 +08:00
|
|
|
static struct attribute *isl29018_attributes[] = {
|
2015-04-17 03:20:59 +08:00
|
|
|
ISL29018_DEV_ATTR(in_illuminance_scale_available),
|
|
|
|
ISL29018_DEV_ATTR(in_illuminance_integration_time_available),
|
2012-06-19 02:33:07 +08:00
|
|
|
ISL29018_DEV_ATTR(proximity_on_chip_ambient_infrared_suppression),
|
2010-10-08 06:48:09 +08:00
|
|
|
NULL
|
|
|
|
};
|
|
|
|
|
2014-08-29 22:26:00 +08:00
|
|
|
static struct attribute *isl29023_attributes[] = {
|
2015-04-17 03:20:59 +08:00
|
|
|
ISL29018_DEV_ATTR(in_illuminance_scale_available),
|
|
|
|
ISL29018_DEV_ATTR(in_illuminance_integration_time_available),
|
2014-08-29 22:26:00 +08:00
|
|
|
NULL
|
|
|
|
};
|
|
|
|
|
2014-08-29 22:26:00 +08:00
|
|
|
static const struct attribute_group isl29018_group = {
|
2010-10-08 06:48:09 +08:00
|
|
|
.attrs = isl29018_attributes,
|
|
|
|
};
|
|
|
|
|
2014-08-29 22:26:00 +08:00
|
|
|
static const struct attribute_group isl29023_group = {
|
|
|
|
.attrs = isl29023_attributes,
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
isl29018,
|
|
|
|
isl29023,
|
|
|
|
isl29035,
|
|
|
|
};
|
|
|
|
|
2012-04-20 15:27:38 +08:00
|
|
|
static int isl29018_chip_init(struct isl29018_chip *chip)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
|
|
|
int status;
|
2016-02-23 04:34:32 +08:00
|
|
|
struct device *dev = regmap_get_device(chip->regmap);
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2014-08-29 22:26:00 +08:00
|
|
|
if (chip->type == isl29035) {
|
2016-10-10 15:19:56 +08:00
|
|
|
unsigned int id;
|
|
|
|
|
|
|
|
status = regmap_read(chip->regmap, ISL29035_REG_DEVICE_ID, &id);
|
|
|
|
if (status < 0) {
|
|
|
|
dev_err(dev,
|
|
|
|
"Error reading ID register with error %d\n",
|
|
|
|
status);
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
|
|
|
id = (id & ISL29035_DEVICE_ID_MASK) >> ISL29035_DEVICE_ID_SHIFT;
|
|
|
|
|
|
|
|
if (id != ISL29035_DEVICE_ID)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
/* Clear brownout bit */
|
|
|
|
status = regmap_update_bits(chip->regmap,
|
|
|
|
ISL29035_REG_DEVICE_ID,
|
|
|
|
ISL29035_BOUT_MASK, 0);
|
2014-08-29 22:26:00 +08:00
|
|
|
if (status < 0)
|
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
2016-10-10 15:19:57 +08:00
|
|
|
/*
|
|
|
|
* Code added per Intersil Application Note 1534:
|
2011-08-10 06:18:14 +08:00
|
|
|
* When VDD sinks to approximately 1.8V or below, some of
|
|
|
|
* the part's registers may change their state. When VDD
|
|
|
|
* recovers to 2.25V (or greater), the part may thus be in an
|
|
|
|
* unknown mode of operation. The user can return the part to
|
|
|
|
* a known mode of operation either by (a) setting VDD = 0V for
|
|
|
|
* 1 second or more and then powering back up with a slew rate
|
|
|
|
* of 0.5V/ms or greater, or (b) via I2C disable all ALS/PROX
|
|
|
|
* conversions, clear the test registers, and then rewrite all
|
|
|
|
* registers to the desired values.
|
|
|
|
* ...
|
2016-07-05 19:55:39 +08:00
|
|
|
* For ISL29011, ISL29018, ISL29021, ISL29023
|
2011-08-10 06:18:14 +08:00
|
|
|
* 1. Write 0x00 to register 0x08 (TEST)
|
|
|
|
* 2. Write 0x00 to register 0x00 (CMD1)
|
|
|
|
* 3. Rewrite all registers to the desired values
|
|
|
|
*
|
|
|
|
* ISL29018 Data Sheet (FN6619.1, Feb 11, 2010) essentially says
|
|
|
|
* the same thing EXCEPT the data sheet asks for a 1ms delay after
|
|
|
|
* writing the CMD1 register.
|
|
|
|
*/
|
2012-04-20 15:27:38 +08:00
|
|
|
status = regmap_write(chip->regmap, ISL29018_REG_TEST, 0x0);
|
2011-08-10 06:18:14 +08:00
|
|
|
if (status < 0) {
|
2016-02-23 04:34:32 +08:00
|
|
|
dev_err(dev, "Failed to clear isl29018 TEST reg.(%d)\n",
|
2014-09-26 01:09:09 +08:00
|
|
|
status);
|
2011-08-10 06:18:14 +08:00
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
2016-10-10 15:19:57 +08:00
|
|
|
/*
|
|
|
|
* See Intersil AN1534 comments above.
|
2011-08-10 06:18:14 +08:00
|
|
|
* "Operating Mode" (COMMAND1) register is reprogrammed when
|
|
|
|
* data is read from the device.
|
|
|
|
*/
|
2012-04-20 15:27:38 +08:00
|
|
|
status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1, 0);
|
2011-08-10 06:18:14 +08:00
|
|
|
if (status < 0) {
|
2016-02-23 04:34:32 +08:00
|
|
|
dev_err(dev, "Failed to clear isl29018 CMD1 reg.(%d)\n",
|
2014-09-26 01:09:09 +08:00
|
|
|
status);
|
2011-08-10 06:18:14 +08:00
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
2014-09-23 11:52:30 +08:00
|
|
|
usleep_range(1000, 2000); /* per data sheet, page 10 */
|
2011-08-10 06:18:14 +08:00
|
|
|
|
2016-07-05 19:55:39 +08:00
|
|
|
/* Set defaults */
|
2015-04-17 03:20:59 +08:00
|
|
|
status = isl29018_set_scale(chip, chip->scale.scale,
|
|
|
|
chip->scale.uscale);
|
2010-10-08 06:48:09 +08:00
|
|
|
if (status < 0) {
|
2016-02-23 04:34:32 +08:00
|
|
|
dev_err(dev, "Init of isl29018 fails\n");
|
2010-10-08 06:48:09 +08:00
|
|
|
return status;
|
|
|
|
}
|
|
|
|
|
2015-04-17 03:20:59 +08:00
|
|
|
status = isl29018_set_integration_time(chip,
|
|
|
|
isl29018_int_utimes[chip->type][chip->int_time]);
|
2016-10-10 15:19:58 +08:00
|
|
|
if (status < 0)
|
2016-02-23 04:34:32 +08:00
|
|
|
dev_err(dev, "Init of isl29018 fails\n");
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2016-10-10 15:19:58 +08:00
|
|
|
return status;
|
2010-10-08 06:48:09 +08:00
|
|
|
}
|
|
|
|
|
2014-08-29 22:26:00 +08:00
|
|
|
static const struct iio_info isl29018_info = {
|
|
|
|
.attrs = &isl29018_group,
|
2016-02-12 23:10:27 +08:00
|
|
|
.read_raw = isl29018_read_raw,
|
|
|
|
.write_raw = isl29018_write_raw,
|
2011-05-18 21:42:37 +08:00
|
|
|
};
|
|
|
|
|
2014-08-29 22:26:00 +08:00
|
|
|
static const struct iio_info isl29023_info = {
|
|
|
|
.attrs = &isl29023_group,
|
2016-02-12 23:10:27 +08:00
|
|
|
.read_raw = isl29018_read_raw,
|
|
|
|
.write_raw = isl29018_write_raw,
|
2014-08-29 22:26:00 +08:00
|
|
|
};
|
|
|
|
|
2016-07-05 19:55:40 +08:00
|
|
|
static bool isl29018_is_volatile_reg(struct device *dev, unsigned int reg)
|
2012-04-20 15:27:38 +08:00
|
|
|
{
|
|
|
|
switch (reg) {
|
|
|
|
case ISL29018_REG_ADD_DATA_LSB:
|
|
|
|
case ISL29018_REG_ADD_DATA_MSB:
|
|
|
|
case ISL29018_REG_ADD_COMMAND1:
|
|
|
|
case ISL29018_REG_TEST:
|
2014-08-29 22:26:00 +08:00
|
|
|
case ISL29035_REG_DEVICE_ID:
|
2012-04-20 15:27:38 +08:00
|
|
|
return true;
|
|
|
|
default:
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct regmap_config isl29018_regmap_config = {
|
|
|
|
.reg_bits = 8,
|
|
|
|
.val_bits = 8,
|
2016-07-05 19:55:40 +08:00
|
|
|
.volatile_reg = isl29018_is_volatile_reg,
|
2012-04-20 15:27:38 +08:00
|
|
|
.max_register = ISL29018_REG_TEST,
|
|
|
|
.num_reg_defaults_raw = ISL29018_REG_TEST + 1,
|
|
|
|
.cache_type = REGCACHE_RBTREE,
|
|
|
|
};
|
|
|
|
|
2014-08-29 22:26:00 +08:00
|
|
|
static const struct regmap_config isl29035_regmap_config = {
|
|
|
|
.reg_bits = 8,
|
|
|
|
.val_bits = 8,
|
2016-07-05 19:55:40 +08:00
|
|
|
.volatile_reg = isl29018_is_volatile_reg,
|
2014-08-29 22:26:00 +08:00
|
|
|
.max_register = ISL29035_REG_DEVICE_ID,
|
|
|
|
.num_reg_defaults_raw = ISL29035_REG_DEVICE_ID + 1,
|
|
|
|
.cache_type = REGCACHE_RBTREE,
|
|
|
|
};
|
|
|
|
|
2016-07-05 19:55:40 +08:00
|
|
|
struct isl29018_chip_info {
|
2014-08-29 22:26:00 +08:00
|
|
|
const struct iio_chan_spec *channels;
|
|
|
|
int num_channels;
|
|
|
|
const struct iio_info *indio_info;
|
|
|
|
const struct regmap_config *regmap_cfg;
|
|
|
|
};
|
|
|
|
|
2016-07-05 19:55:40 +08:00
|
|
|
static const struct isl29018_chip_info isl29018_chip_info_tbl[] = {
|
2014-08-29 22:26:00 +08:00
|
|
|
[isl29018] = {
|
|
|
|
.channels = isl29018_channels,
|
|
|
|
.num_channels = ARRAY_SIZE(isl29018_channels),
|
|
|
|
.indio_info = &isl29018_info,
|
|
|
|
.regmap_cfg = &isl29018_regmap_config,
|
|
|
|
},
|
|
|
|
[isl29023] = {
|
|
|
|
.channels = isl29023_channels,
|
|
|
|
.num_channels = ARRAY_SIZE(isl29023_channels),
|
|
|
|
.indio_info = &isl29023_info,
|
|
|
|
.regmap_cfg = &isl29018_regmap_config,
|
|
|
|
},
|
|
|
|
[isl29035] = {
|
|
|
|
.channels = isl29023_channels,
|
|
|
|
.num_channels = ARRAY_SIZE(isl29023_channels),
|
|
|
|
.indio_info = &isl29023_info,
|
|
|
|
.regmap_cfg = &isl29035_regmap_config,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
2014-01-09 18:20:00 +08:00
|
|
|
static const char *isl29018_match_acpi_device(struct device *dev, int *data)
|
|
|
|
{
|
|
|
|
const struct acpi_device_id *id;
|
|
|
|
|
|
|
|
id = acpi_match_device(dev->driver->acpi_match_table, dev);
|
|
|
|
|
|
|
|
if (!id)
|
|
|
|
return NULL;
|
|
|
|
|
2016-02-18 15:35:37 +08:00
|
|
|
*data = (int)id->driver_data;
|
2014-01-09 18:20:00 +08:00
|
|
|
|
|
|
|
return dev_name(dev);
|
|
|
|
}
|
|
|
|
|
2019-01-08 17:09:39 +08:00
|
|
|
static void isl29018_disable_regulator_action(void *_data)
|
|
|
|
{
|
|
|
|
struct isl29018_chip *chip = _data;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
err = regulator_disable(chip->vcc_reg);
|
|
|
|
if (err)
|
|
|
|
pr_err("failed to disable isl29018's VCC regulator!\n");
|
|
|
|
}
|
|
|
|
|
2012-11-20 02:21:57 +08:00
|
|
|
static int isl29018_probe(struct i2c_client *client,
|
2016-02-18 15:35:36 +08:00
|
|
|
const struct i2c_device_id *id)
|
2010-10-08 06:48:09 +08:00
|
|
|
{
|
|
|
|
struct isl29018_chip *chip;
|
2011-06-27 20:07:57 +08:00
|
|
|
struct iio_dev *indio_dev;
|
2010-10-08 06:48:09 +08:00
|
|
|
int err;
|
2014-01-09 18:20:00 +08:00
|
|
|
const char *name = NULL;
|
|
|
|
int dev_id = 0;
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2013-07-22 19:03:00 +08:00
|
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
|
2016-07-05 19:55:37 +08:00
|
|
|
if (!indio_dev)
|
2013-07-22 19:03:00 +08:00
|
|
|
return -ENOMEM;
|
2016-10-10 15:19:55 +08:00
|
|
|
|
2011-06-27 20:07:57 +08:00
|
|
|
chip = iio_priv(indio_dev);
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2011-06-27 20:07:57 +08:00
|
|
|
i2c_set_clientdata(client, indio_dev);
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2014-01-09 18:20:00 +08:00
|
|
|
if (id) {
|
|
|
|
name = id->name;
|
|
|
|
dev_id = id->driver_data;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (ACPI_HANDLE(&client->dev))
|
|
|
|
name = isl29018_match_acpi_device(&client->dev, &dev_id);
|
|
|
|
|
2010-10-08 06:48:09 +08:00
|
|
|
mutex_init(&chip->lock);
|
|
|
|
|
2014-01-09 18:20:00 +08:00
|
|
|
chip->type = dev_id;
|
2015-04-17 03:20:58 +08:00
|
|
|
chip->calibscale = 1;
|
|
|
|
chip->ucalibscale = 0;
|
2015-04-17 03:20:59 +08:00
|
|
|
chip->int_time = ISL29018_INT_TIME_16;
|
|
|
|
chip->scale = isl29018_scales[chip->int_time][0];
|
2012-10-25 07:39:00 +08:00
|
|
|
chip->suspended = false;
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2019-01-08 17:09:39 +08:00
|
|
|
chip->vcc_reg = devm_regulator_get(&client->dev, "vcc");
|
|
|
|
if (IS_ERR(chip->vcc_reg)) {
|
|
|
|
err = PTR_ERR(chip->vcc_reg);
|
|
|
|
if (err != -EPROBE_DEFER)
|
|
|
|
dev_err(&client->dev, "failed to get VCC regulator!\n");
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = regulator_enable(chip->vcc_reg);
|
|
|
|
if (err) {
|
|
|
|
dev_err(&client->dev, "failed to enable VCC regulator!\n");
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = devm_add_action_or_reset(&client->dev, isl29018_disable_regulator_action,
|
|
|
|
chip);
|
|
|
|
if (err) {
|
|
|
|
dev_err(&client->dev, "failed to setup regulator cleanup action!\n");
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2014-08-29 22:26:00 +08:00
|
|
|
chip->regmap = devm_regmap_init_i2c(client,
|
2016-07-05 19:55:40 +08:00
|
|
|
isl29018_chip_info_tbl[dev_id].regmap_cfg);
|
2012-04-20 15:27:38 +08:00
|
|
|
if (IS_ERR(chip->regmap)) {
|
|
|
|
err = PTR_ERR(chip->regmap);
|
2016-02-23 04:34:32 +08:00
|
|
|
dev_err(&client->dev, "regmap initialization fails: %d\n", err);
|
2013-07-22 19:03:00 +08:00
|
|
|
return err;
|
2012-04-20 15:27:38 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
err = isl29018_chip_init(chip);
|
2010-10-08 06:48:09 +08:00
|
|
|
if (err)
|
2013-07-22 19:03:00 +08:00
|
|
|
return err;
|
2010-10-08 06:48:09 +08:00
|
|
|
|
2016-07-05 19:55:40 +08:00
|
|
|
indio_dev->info = isl29018_chip_info_tbl[dev_id].indio_info;
|
|
|
|
indio_dev->channels = isl29018_chip_info_tbl[dev_id].channels;
|
|
|
|
indio_dev->num_channels = isl29018_chip_info_tbl[dev_id].num_channels;
|
2014-01-09 18:20:00 +08:00
|
|
|
indio_dev->name = name;
|
2011-06-27 20:07:57 +08:00
|
|
|
indio_dev->dev.parent = &client->dev;
|
|
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
2016-10-10 15:19:55 +08:00
|
|
|
|
2016-07-05 19:55:37 +08:00
|
|
|
return devm_iio_device_register(&client->dev, indio_dev);
|
2010-10-08 06:48:09 +08:00
|
|
|
}
|
|
|
|
|
2012-10-25 07:39:00 +08:00
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int isl29018_suspend(struct device *dev)
|
|
|
|
{
|
|
|
|
struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev));
|
2019-01-08 17:09:39 +08:00
|
|
|
int ret;
|
2012-10-25 07:39:00 +08:00
|
|
|
|
|
|
|
mutex_lock(&chip->lock);
|
|
|
|
|
2016-10-10 15:19:57 +08:00
|
|
|
/*
|
|
|
|
* Since this driver uses only polling commands, we are by default in
|
2012-10-25 07:39:00 +08:00
|
|
|
* auto shutdown (ie, power-down) mode.
|
|
|
|
* So we do not have much to do here.
|
|
|
|
*/
|
|
|
|
chip->suspended = true;
|
2019-01-08 17:09:39 +08:00
|
|
|
ret = regulator_disable(chip->vcc_reg);
|
|
|
|
if (ret)
|
|
|
|
dev_err(dev, "failed to disable VCC regulator\n");
|
2012-10-25 07:39:00 +08:00
|
|
|
|
|
|
|
mutex_unlock(&chip->lock);
|
2016-10-10 15:19:55 +08:00
|
|
|
|
2019-01-08 17:09:39 +08:00
|
|
|
return ret;
|
2012-10-25 07:39:00 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
static int isl29018_resume(struct device *dev)
|
|
|
|
{
|
|
|
|
struct isl29018_chip *chip = iio_priv(dev_get_drvdata(dev));
|
|
|
|
int err;
|
|
|
|
|
|
|
|
mutex_lock(&chip->lock);
|
|
|
|
|
2019-01-08 17:09:39 +08:00
|
|
|
err = regulator_enable(chip->vcc_reg);
|
|
|
|
if (err) {
|
|
|
|
dev_err(dev, "failed to enable VCC regulator\n");
|
|
|
|
mutex_unlock(&chip->lock);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2012-10-25 07:39:00 +08:00
|
|
|
err = isl29018_chip_init(chip);
|
|
|
|
if (!err)
|
|
|
|
chip->suspended = false;
|
|
|
|
|
|
|
|
mutex_unlock(&chip->lock);
|
2016-10-10 15:19:55 +08:00
|
|
|
|
2012-10-25 07:39:00 +08:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static SIMPLE_DEV_PM_OPS(isl29018_pm_ops, isl29018_suspend, isl29018_resume);
|
|
|
|
#define ISL29018_PM_OPS (&isl29018_pm_ops)
|
|
|
|
#else
|
|
|
|
#define ISL29018_PM_OPS NULL
|
|
|
|
#endif
|
|
|
|
|
2017-05-20 05:28:53 +08:00
|
|
|
#ifdef CONFIG_ACPI
|
2014-01-09 18:20:00 +08:00
|
|
|
static const struct acpi_device_id isl29018_acpi_match[] = {
|
|
|
|
{"ISL29018", isl29018},
|
|
|
|
{"ISL29023", isl29023},
|
|
|
|
{"ISL29035", isl29035},
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(acpi, isl29018_acpi_match);
|
2017-05-20 05:28:53 +08:00
|
|
|
#endif
|
2014-01-09 18:20:00 +08:00
|
|
|
|
2010-10-08 06:48:09 +08:00
|
|
|
static const struct i2c_device_id isl29018_id[] = {
|
2014-08-29 22:26:00 +08:00
|
|
|
{"isl29018", isl29018},
|
|
|
|
{"isl29023", isl29023},
|
|
|
|
{"isl29035", isl29035},
|
2010-10-08 06:48:09 +08:00
|
|
|
{}
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, isl29018_id);
|
|
|
|
|
2011-12-23 10:44:43 +08:00
|
|
|
static const struct of_device_id isl29018_of_match[] = {
|
2012-04-24 14:11:38 +08:00
|
|
|
{ .compatible = "isil,isl29018", },
|
2014-08-29 22:26:00 +08:00
|
|
|
{ .compatible = "isil,isl29023", },
|
|
|
|
{ .compatible = "isil,isl29035", },
|
2011-12-23 10:44:43 +08:00
|
|
|
{ },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, isl29018_of_match);
|
|
|
|
|
2010-10-08 06:48:09 +08:00
|
|
|
static struct i2c_driver isl29018_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "isl29018",
|
2014-01-09 18:20:00 +08:00
|
|
|
.acpi_match_table = ACPI_PTR(isl29018_acpi_match),
|
2012-10-25 07:39:00 +08:00
|
|
|
.pm = ISL29018_PM_OPS,
|
2011-12-23 10:44:43 +08:00
|
|
|
.of_match_table = isl29018_of_match,
|
2010-10-08 06:48:09 +08:00
|
|
|
},
|
|
|
|
.probe = isl29018_probe,
|
|
|
|
.id_table = isl29018_id,
|
|
|
|
};
|
2011-11-16 17:13:38 +08:00
|
|
|
module_i2c_driver(isl29018_driver);
|
2010-10-08 06:48:09 +08:00
|
|
|
|
|
|
|
MODULE_DESCRIPTION("ISL29018 Ambient Light Sensor driver");
|
|
|
|
MODULE_LICENSE("GPL");
|